We offers a broad range of engineering and technical standards, specifications, codes in PDF for personal education purpose with affortable price. Any requirements please contact fdcrw@qq.com.

STANDARD SEARCH->SAI STANDARD LIST:

Total count:1585 records, Page:1 |2 |3 |4 |
Posstandard Numberpublication dateLanguageDescription
1SAI AS 5488-20122012-05-14EnglishClassification of Subsurface Utility Information (SUI)
2SAI AS/NZS 3823.1.2-20122012-05-11EnglishPerformance of electrical appliances - Airconditioners and heat pumps Part 1.2: Ducted airconditioners and air-to-air heat pumps-Testing and rating for performance
3SAI AS/NZS 3823.1.1-20122012-05-11EnglishPerformance of Electrical Appliances - Airconditioners and Heat Pumps Part 1.1: Non-Ducted Airconditioners and Heat Pumps - Testing and Rating for Performance
4SAI AS 3706.2-20122012-04-30EnglishGeotextiles-Methods of test Method 2: Determination of tensile properties - Wide strip and grab method
5SAI AS 3705-20122012-04-30EnglishGeotextiles-Identification, marking and general data
6SAI AS/NZS 4067-20122012-04-30EnglishProtective helmets for structural firefighting
7SAI AS/NZS 61000.6.3-20122012-04-30EnglishElectromagnetic compatibility (EMC) Part 6.3: Generic standards-Emission standard for residential, commercial and light-industrial environments
8SAI AS/NZS IEC 60670.1-20122012-04-30EnglishBoxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 1: General requirements
9SAI AS/NZS IEC 60670.21-20122012-04-30EnglishBoxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 21: Particular requirements for boxes and enclosures with provision for suspension means
10SAI AS/NZS IEC 60670.22-20122012-04-30EnglishBoxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 22: Particular requirements for connecting boxes and enclosures
11SAI AS/NZS IEC 60670.23-20122012-04-30EnglishBoxes and enclosures for electrical accessories for household and similar fixed electrical installations Part 23: Particular requirements for floor boxes and enclosures
12SAI AS/NZS IEC 60999.1-20122012-04-30EnglishConnecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included)
13SAI AS/NZS IEC 60999.2-20122012-04-30EnglishConnecting devices-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)
14SAI AS/NZS ISO 23081.3-20122012-04-30EnglishInformation and documentation - Managing metadata for records Part 3: Self-assessment method
15SAI HB 89-20122012-04-30EnglishRisk management – Guidelines on risk assessment techniques
16SAI AS IEC 62040.3-20122012-04-30EnglishUninterruptible power systems (UPS) Part 3: Method of specifying the performance and test requirements
17SAI AS 3706.13-20122012-04-30EnglishGeotextiles-Methods of test Method 13: Determination of durability-Resistance to certain microbiological agents
18SAI AS 3706.11-20122012-04-30EnglishGeotextiles-Methods of test Method 11: Determination of durability-Resistance to degradation by light, heat and moisture
19SAI AS 3706.10.1-20122012-04-30EnglishGeotextiles—Methods of test Method 10.1: Determination of transmissivity - Radial method
20SAI AS 3706.9-20122012-04-30EnglishGeotextiles-Methods of test Method 9: Determination of permittivity, permeability and flow rate
21SAI AS 3706.6-20122012-04-30EnglishGeotextiles-Methods of test Method 6: Determination of seam strength
22SAI AS 3706.4-20122012-04-30EnglishGeotextiles-Methods of test Method 4: Determination of burst strength-California bearing ratio (CBR)-Plunger method
23SAI AS 3706.3-20122012-04-30EnglishGeotextiles-Methods of test Method 3: Determination of tearing strength-Trapezoidal method
24SAI AS 3706.1-20122012-04-30EnglishGeotextiles-Methods of test Method 1: General requirements, sampling, conditioning, basic physical properties and statistical analysis
25SAI SA/SNZ HB 89-20122012-04-30EnglishRisk management – Guidelines on risk assessment techniques
26SAI TR IEC 61000.3.6-20122012-04-24EnglishElectromagnetic compatibility (EMC) Part 3.6: Limits-Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems
27SAI AS/NZS ISO 13028-20122012-04-24EnglishInformation and documentation-Implementation guidelines for digitization of records
28SAI TR IEC 61000.3.7-20122012-04-24EnglishElectromagnetic compatibility (EMC) Part 3.7: Limits-Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems
29SAI AS ISO 3664-20122012-04-24EnglishGraphic technology and photography-Viewing conditions
30SAI AS ISO 2846.1-20122012-04-24EnglishGraphic technology-Colour and transparency of printing ink sets for four-colour printing Part 1: Sheet-fed and heat-set web offset lithographic printing
31SAI RUL ST.1-20122012-04-23EnglishRulings to safety of toys Standards Ruling 1: Small parts (Ruling to AS/NZS ISO 8124.1:2010)
32SAI AS/NZS 60076.5-20122012-04-16EnglishPower transformers Part 5: Ability to withstand short circuit
33SAI AS/NZS 60320.1-20122012-04-16EnglishAppliance couplers for household and similar general purposes Part 1: General requirements
34SAI AS 1141.3.2-20122012-04-16EnglishMethods for sampling and testing aggregates Method 3.2: Sampling-Rock spalls and boulders
35SAI AS 1141.66-20122012-04-16EnglishMethods for sampling and testing aggregates Method 66: Methylene blue adsorption value of fine aggregate and mineral fillers
36SAI AS 1141.3.1-20122012-04-16EnglishMethods for sampling and testing aggregates Method 3.1: Sampling-Aggregates
37SAI HB 331-20122012-04-04EnglishOverhead line design
38SAI HB 203-20122012-03-30EnglishManaging environment-related risk
39SAI MP 54-20122012-03-28EnglishSurvey of standards environment for telehealth devices
40SAI AS 61508 SUPP 1-20122012-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Supplement 1: Commented version - Supplement 1 to AS 61508 series
41SAI AS 4685.11-20122012-03-28EnglishPlayground equipment Part 11: Additional specific safety requirements and test methods for spatial network
42SAI TR IEC 61000.3.13-20122012-03-26EnglishElectromagnetic compatibility (EMC) Part 3.13: Limits-Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems
43SAI TR IEC 61000.2.6-20122012-03-26EnglishElectromagnetic compatibility (EMC) Part 2.6: Environment - Assessment of the emission levels in the power supply of industrial plants as regards lowfrequency conducted disturbances
44SAI HB 90.1-20122012-03-22EnglishThe Small Business Handbook - Guide to ISO 9001:2008
45SAI AS/NZS 4853-20122012-03-21EnglishElectrical hazards on metallic pipelines
46SAI AS ISO 8713-20122012-03-19EnglishElectric road vehicles-Terminology
47SAI AS/NZS IEC 62471.2-20122012-03-12EnglishPhotobiological safety of lamps and lamp systems Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
48SAI RUL EA.1-20122012-03-07EnglishRulings to explosive atmospheres Standards Ruling 1: Drop test fail criterion (Ruling to AS/NZS 60079.29.1:2008)
49SAI RUL EA.2-20122012-03-07EnglishRulings to explosive atmospheres Standards Ruling 2: Thermal endurance test (Ruling to AS/NZS 60079.0)
50SAI AS 5830.1-20122012-03-06EnglishIn-line ball valves for use in plumbing water supply systems Part 1: Metal-bodied
51SAI AS/NZS ISO 10001-20122012-03-02EnglishQuality management-Customer satisfaction-Guidelines for codes of conduct for organizations
52SAI AS 4454-20122012-02-29EnglishComposts, soil conditioners and mulches - Incorporating Amendment No. 1: June 2012
53SAI MP 120-20122012-02-29EnglishTelehealth: Remote Patient Monitoring-Discussion Paper
54SAI AS/NZS 5026-20122012-02-22EnglishThe storage and handling of Class 4 dangerous goods - Incorporating Amendment 1: 8 May 2013
55SAI TR IEC 61000.1.4-20122012-01-31EnglishElectromagnetic compatibility (EMC) Part 1.4: General—Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz
56SAI AS/NZS 4069-20122012-01-24EnglishBath boards and seats-Product requirements
57SAI AS/NZS ISO 19144.1-20112011-12-23EnglishGeographic information—Classification systems Part 1: Classification system structure
58SAI AS 61000.3.100-20112011-12-23EnglishElectromagnetic compatibility (EMC) Part 3.100: Limits—Steady state voltage limits in public electricity systems
59SAI AS/NZS 3695.1-20112011-12-23EnglishWheelchairs Part 1: Requirements and test methods for manual wheelchairs
60SAI AS/NZS 3879-20112011-12-23EnglishSolvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
61SAI AS/NZS ISO 19146-20112011-12-23EnglishGeographic information—Cross-domain vocabularies
62SAI AS/NZS ISO 19143-20112011-12-23EnglishGeographic information—Filter encoding
63SAI AS 2805.6.7-20112011-12-23EnglishElectronic funds transfer— Requirements for interfaces Part 6.7: Key management— Transaction keys—Derived unique key per transaction (DUKPT)
64SAI AS/NZS ISO 19142-20112011-12-23EnglishGeographic information—Web Feature Service
65SAI AS/NZS ISO 6709-20112011-12-23EnglishStandard representation of geographic point location by coordinates
66SAI AS/NZS ISO 19115.2-20112011-12-23EnglishGeographic information—Metadata Part 2: Extensions for imagery and gridded data
67SAI AS/NZS ISO 19101.2-20112011-12-23EnglishGeographic information—Reference model Part 2: Imagery
68SAI AS 3533.4.4-20112011-12-22EnglishAmusement rides and devices Part 4.4: Specific requirements—Concession go-karts
69SAI AS 4145.5-20112011-12-22EnglishLocksets and hardware for doors and windows Part 5: Controlled door closing devices
70SAI AS 4145.5-20112011-12-22EnglishLocksets and hardware for doors and windows Part 5: Controlled door closing devices - Incorporating Amendment 1: September 2013
71SAI AS/NZS ISO 9999-20112011-12-20EnglishAssistive products for persons with disability—Classification and terminology
72SAI AS/NZS ISO 7176.26-20112011-12-20EnglishWheelchairs Part 26: Vocabulary
73SAI AS/NZS ISO 7176.10-20112011-12-20EnglishWheelchairs Part 10: Determination of obstacleclimbing ability of electrically powered wheelchairs
74SAI AS/NZS ISO 10535-20112011-12-20EnglishHoists for the transfer of disabled persons—Requirements and test methods
75SAI AS/NZS ISO 7176.4-20112011-12-20EnglishWheelchairs Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range
76SAI AS/NZS CISPR 15-20112011-12-20EnglishLimits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
77SAI AS/NZS 61535-20112011-12-12EnglishInstallation couplers intended for permanent connection in fixed installations
78SAI AS/NZS IEC 60825.2-20112011-12-05EnglishSafety of laser products Part 2: Safety of optical fibre communication systems (OFCS)
79SAI AS 5239-20112011-12-05EnglishExamination of ignitable liquids in fire debris
80SAI AS/NZS IEC 62471-20112011-12-05EnglishPhotobiological safety of lamps and lamp systems
81SAI AS/NZS IEC 60825.14-20112011-12-05EnglishSafety of laser products Part 14: A user’s guide
82SAI AS/NZS IEC 60825.1-20112011-12-05EnglishSafety of laser products Part 1: Equipment classification and requirements
83SAI AS/NZS ISO 19126-20112011-11-30EnglishGeographic information—Feature concept dictionaries and registers
84SAI AS/NZS ISO 19141-20112011-11-30EnglishGeographic information—Schema for moving features
85SAI AS/NZS ISO 19132-20112011-11-30EnglishGeographic information—Location-based services—Reference model
86SAI AS/NZS ISO 19129-20112011-11-30EnglishGeographic information—Imagery, gridded and coverage data framework
87SAI TS ISO 16949-20112011-11-30EnglishQuality management-Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
88SAI AS/NZS 60079.35.1-20112011-11-21EnglishExplosive atmospheres Part 35.1: Caplights for use in mines susceptible to firedamp—General requirements—Construction and testing in relation to the risk of explosion
89SAI AS/NZS 3190-20112011-11-21EnglishApproval and test specification—Residual current devices (current-operated earth-leakage devices)
90SAI AS/NZS 4819-20112011-11-18EnglishRural and urban addressing
91SAI AS 4795.2-20112011-11-15EnglishButterfly valves for waterworks purposes Part 2: Double flanged
92SAI AS/NZS 3666.1-20112011-11-14EnglishAir-handling and water systems of buildings—Microbial control Part 1: Design, installation and commissioning
93SAI AS/NZS 3666.4-20112011-11-14EnglishAir-handling and water systems of buildings—Microbial control Part 4: Performance-based maintenance of air-handling systems (ducts and components)
94SAI AS/NZS 3666.3-20112011-11-14EnglishAir-handling and water systems of buildings—Microbial control Part 3: Performance-based maintenance of cooling water systems
95SAI AS/NZS 3666.2-20112011-11-14EnglishAir-handling and water systems of buildings—Microbial control Part 2: Operation and maintenance
96SAI AS IEC 60300.3.11-20112011-11-14EnglishDependability management Part 3.11: Application guide—Reliability centred maintenance
97SAI AS IEC 60300.3.15-20112011-11-14EnglishDependability management Part 3.15: Application guide— Engineering of system dependability
98SAI AS IEC 60300.3.12-20112011-11-14EnglishDependability management Part 3.12: Application guide—Integrated logistic support
99SAI AS IEC 62502-20112011-11-14EnglishAnalysis techniques for dependability— Event tree analysis (ETA)
100SAI AS IEC 62508-20112011-11-14EnglishGuidance on human aspects of dependability
101SAI AS/NZS 61558.2.5-20112011-11-11EnglishSafety of Power Transformers, Reactors, Power Supply units and combinations thereof Part 2.5: Particular requirements and tests for transformers for shavers, power supply units for shavers and shaver supply units - Incorporating Amendment 1: Novem
102SAI AS/NZS 1337.4-20112011-11-11EnglishEye and face protection Part 4: Filters and eye protectors against laser radiation (laser eyeprotectors)
103SAI AS/NZS 1337.5-20112011-11-11EnglishEye and face protection Part 5: Eye protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
104SAI AS 8700-20112011-11-11EnglishExecution of prefabricated vertical drains
105SAI AS/NZS ISO/IEC 17021-20112011-11-11EnglishConformity assessment—Requirements for bodies providing audit and certification of management systems
106SAI AS/NZS 5110-20112011-11-04EnglishRecessed luminaire barriers - Incorporating Amendment No. 1 - February 2013
107SAI AS/NZS 2081-20112011-11-04EnglishElectrical protection devices for mines and quarries
108SAI AS 2252.6-20112011-10-31EnglishControlled environments Part 6: Clean workstations—Design, installation and use
109SAI AS/NZS 62115-20112011-10-28EnglishElectric Toys – Safety
110SAI AS/NZS 60745.2.22-20112011-10-28EnglishHand-held motor-operated electric tools-Safety Part 2.22: Particular requirements for cut-off machines - Incorporating Amendment No. 1: April 2012
111SAI AS/NZS 62087.2.2-20112011-10-26EnglishPower consumption of audio, video and related equipment Part 2.2: Minimum energy performance standards (MEPS) and energy rating label requirements for television sets - Incorporating Amendment No. 1: June 2012; Incorporating Amendment No. 2: Decem
112SAI AS/NZS 3112-20112011-10-25EnglishApproval and test specification—Plugs and socket-outlets
113SAI AS/NZS 3112-20112011-10-25EnglishApproval and test specification-Plugs and socket-outlets - Incorporating Amendment No. 1 April 2012
114SAI AS/NZS 3112-20112011-10-25EnglishApproval and test specification-Plugs and socket-outlets - Incorporating Amendment No. 1: April 2012; Incorporating Amendment No. 2: August 2013
115SAI AS SSA 5300-20112011-10-20EnglishAustralian Fish Names Standard
116SAI AS/NZS ISO 8124.6-20112011-10-19EnglishSafety of toys Part 6: Swings, slides and similar activity toys for indoor and outdoor family domestic use - Incorporating Amendment No. 1: 10/2012
117SAI AS/NZS ISO 8124.6-20112011-10-19EnglishSafety of toys Part 6: Swings, slides and similar activity toys for indoor and outdoor family domestic use
118SAI AS/NZS 4421-20112011-10-18EnglishGuard and patrol security services
119SAI AS 3700-20112011-10-14EnglishMasonry structures - Incorporating Amendment No. 1: 09/2012
120SAI AS 3700-20112011-10-14EnglishMasonry structures
121SAI AS/NZS 60079.11-20112011-09-27EnglishExplosive atmospheres Part 11: Equipment protection by intrinsic safety ‘i’
122SAI AS/NZS 60079.11-20112011-09-27EnglishExplosive atmospheres Part 11: Equipment protection by intrinsic safety ‘i’ - Incorporating Amendment 1: April 2013
123SAI AS/NZS 3823.2-20112011-09-23EnglishPerformance of electrical appliances—Air conditioners and heat pumps Part 2: Energy labelling and minimum energy performance standards (MEPS) requirements
124SAI AS/NZS 60079.10.2-20112011-09-15EnglishExplosive atmospheres Part 10.2: Classification of areas—Combustible dust atmospheres
125SAI AS 1397-20112011-09-15EnglishContinuous hot-dip metallic coated steel sheet and strip—Coatings of zinc and zinc alloyed with aluminium and magnesium
126SAI AS 1397-20112011-09-15EnglishContinuous hot-dip metallic coated steel sheet and strip-Coatings of zinc and zinc alloyed with aluminium and magnesium - Incorporating Amendment 1: October 2012
127SAI AS/NZS 3120-20112011-08-29EnglishApproval and test specification-Cord extension sockets - Incorporating Amendment No.1: July 2012
128SAI AS/NZS 3120-20112011-08-29EnglishApproval and test specification-Cord extension sockets
129SAI AS/NZS ISO 9004-20112011-08-29EnglishManaging for the sustained success of an organization-A quality management approach
130SAI AS/NZS 60079.31-20112011-08-25EnglishExplosive atmospheres Part 31: Equipment dust ignition protection by enclosure ‘t’
131SAI AS/NZS 60079.15-20112011-08-25EnglishExplosive atmospheres Part 15: Equipment protection by type of protection ‘n’
132SAI AS/NZS 4432.1-20112011-08-24EnglishGlobal maritime distress and safety system (GMDSS) Part 1: Radar transponder—Marine search and rescue (SART)—Operational and performance requirements, methods of testing and required test results
133SAI AS 4599.1-20112011-08-10EnglishDigital television—Terrestrial broadcasting Part 1: Characteristics of digital terrestrial television transmissions
134SAI AS 3580.6.1-20112011-08-09EnglishMethods for sampling and analysis of ambient air Method 6.1: Determination of ozone—Direct-reading instrumental method
135SAI AS 3580.5.1-20112011-08-09EnglishMethods for sampling and analysis of ambient air Method 5.1: Determination of oxides of nitrogen—Direct-reading instrumental method
136SAI AS 3580.14-20112011-08-09EnglishMethods for sampling and analysis of ambient air Part 14: Meteorological monitoring for ambient air quality monitoring applications
137SAI AS 3580.7.1-20112011-08-09EnglishMethods for sampling and analysis of ambient air Method 7.1: Determination of carbon monoxide—Direct-reading instrumental method
138SAI AS/NZS 2041.1-20112011-08-05EnglishBuried corrugated metal structures Part 1: Design methods
139SAI RUL FP.1-20112011-08-04EnglishRulings to fire protection Standards Ruling 1: Degrees of protection (Ruling to AS 7240.2—2004)
140SAI AS 2304-20112011-07-21EnglishWater storage tanks for fire protection systems
141SAI AS 5264-20112011-07-20EnglishOlive oils and olive-pomace oils
142SAI AS 2252.3-20112011-06-29EnglishControlled environments Part 3: Biological safety cabinets Class III—Design
143SAI AS/NZS 60079.29.4-20112011-06-20EnglishExplosive atmospheres Part 29.4: Gas detectors—Performance requirements of open path detectors for flammable gases
144SAI AS/NZS 60079.25-20112011-06-20EnglishExplosive atmospheres Part 25: Intrinsically safe electrical systems
145SAI AS 2805.14.1-20112011-06-17EnglishElectronic funds transfer—Requirements for interfaces Part 14.1: PIN management and security—General
146SAI AS/NZS 1554.1-20112011-06-17EnglishStructural steel welding Part 1: Welding of steel structures
147SAI AS/NZS 1554.5-20112011-06-17EnglishStructural steel welding Part 5: Welding of steel structures subject to high levels of fatigue loading
148SAI AS/NZS 60079.18-20112011-06-10EnglishExplosive atmospheres Part 18: Equipment protection by encapsulation ‘m’
149SAI AS 4564-20112011-06-09EnglishSpecification for general purpose natural gas
150SAI AS 4556-20112011-06-03EnglishIndirect gas-fired ducted air heaters
151SAI AS/NZS 2638.2-20112011-05-27EnglishGate valves for waterworks purposes Part 2: Resilient seated
152SAI AS 4795.1-20112011-05-27EnglishButterfly valves for waterworks purposes Part 1: Wafer and lugged
153SAI AS/NZS 2638.1-20112011-05-27EnglishGate valves for waterworks purposes Part 1: Metal seated
154SAI AS/NZS 4087-20112011-05-26EnglishMetallic flanges for waterworks purposes
155SAI AS 5262-20112011-05-26EnglishLP Gas mobile industrial direct fired air heaters
156SAI AS/NZS 4087-20112011-05-26EnglishMetallic flanges for waterworks purposes - Incorporating Amendment No. 1: September 2012
157SAI AS/NZS 1418.10-20112011-05-25EnglishCranes, hoists and winches Part 10: Mobile elevating work platforms
158SAI AS/NZS 2772.2-20112011-05-23EnglishRadiofrequency fields Part 2: Principles and methods of measurement and computation鈥? kHz to 300 GHz
159SAI AS 2700-20112011-05-11EnglishColour standards for general purposes
160SAI AS/NZS 4836-20112011-05-04EnglishSafe working on or near low-voltage electrical installations and equipment
161SAI AS/NZS 60745.2.5-20112011-04-29EnglishHand-held motor-operated electric tools—Safety Part 2.5: Particular requirements for circular saws
162SAI AS/NZS 61558.2.3-20112011-04-29EnglishSafety of Power Transformers, Power Supplies, Reactors and combinations thereof Part 2.3: Particular requirements for ignition transformers for gas and oil burners - Incorporating Amendment No. 1; 6/2012
163SAI AS/NZS 61558.2.8-20112011-04-29EnglishSafety of Power Transformers, Power Supplies, Reactors and combinations thereof Part 2.8: Particular requirements for transformers and power supply units for bells and chimes - Incorporating Amendment No. 1: June 2012
164SAI AS/NZS 61558.2.9-20112011-04-29EnglishSafety of Power Transformers, Power Supplies, Reactors and combinations thereof Part 2.9: Particular requirements for transformers and power supply units for class III handlamps for tungsten filament lamps - Incorporating Amendment No. 1: June 201
165SAI AS/NZS 61558.2.23-20112011-04-29EnglishSafety of Power Transformers, Power Supplies, Reactors and combinations thereof Part 2.23: Particular requirements for transformers and power supply units for construction sites - Incorporating Amendment No. 1; 6/2012
166SAI AS/NZS 60335.1-20112011-04-29EnglishHousehold and similar electrical appliances - Safety Part 1: General requirements - Incorporating Amendment No. 1; 6/2012
167SAI AS/NZS 60745.2.3-20112011-04-29EnglishHand-held Motor-operated Electric Tools-Safety Part 2.3: Particular requirements for grinders, polishers and disk-type sanders - Incorporating Amendment No. 1: June 2013
168SAI AS/NZS 4968.3-20112011-04-21EnglishHeavy road vehicles—Mechanical coupling between articulated vehicle combinations Part 3: Kingpins and associated equipment
169SAI AS ISO 27799-20112011-04-21EnglishInformation security management in health using ISO/IEC 27002
170SAI AS 4934.2-20112011-04-14EnglishIncandescent lamps for general lighting services Part 2: Minimum Energy Performance Standards (MEPS) requirements
171SAI AS/NZS 2537.1-20112011-04-13EnglishMechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 1: Plastics piping systems for hot and cold water installations—Crosslinked polyethylene (PE-X)—General
172SAI AS/NZS 2537.4-20112011-04-13EnglishMechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 4: Plastics piping systems for hot and cold water installations—Crosslinked polyethylene (PE-X)—Guidance for the assessment of conformity
173SAI AS/NZS 2537.3-20112011-04-13EnglishMechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 3: Plastics piping systems for hot and cold water installations—Crosslinked polyethylene (PE-X)—Fitness for purpose of the system
174SAI AS/NZS 2537.5-20112011-04-13EnglishMechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Part 5: Plastics pipes and fittings—Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels—Metric series—Specifications—F
175SAI AS/NZS ISO 16034-20112011-04-07EnglishOphthalmic optics—Specifications for single-vision ready-to-wear near-vision spectacles
176SAI AS/NZS ISO 8624-20112011-04-07EnglishOphthalmic optics—Spectacle frames—Measuring system and terminology
177SAI AS/NZS ISO 8980.2-20112011-04-07EnglishOphthalmic optics—Uncut finished spectacle lenses Part 2: Specifications for progressive power lenses
178SAI AS/NZS ISO 8980.3-20112011-04-07EnglishOphthalmic optics—Uncut finished spectacle lenses Part 3: Transmittance specifications and test methods
179SAI AS/NZS ISO 8980.4-20112011-04-07EnglishOphthalmic optics—Uncut finished spectacle lenses Part 4: Specifications and test methods for anti-reflective coatings
180SAI AS/NZS ISO 8980.5-20112011-04-07EnglishOphthalmic optics—Uncut finished spectacle lenses Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
181SAI AS/NZS ISO 10322.1-20112011-04-07EnglishOphthalmic optics—Semi-finished spectacle lens blanks Part 1: Specifications for single-vision and multifocal lens blanks
182SAI AS/NZS ISO 10322.2-20112011-04-07EnglishOphthalmic optics—Semi-finished spectacle lens blanks Part 2: Specifications for progressive power lens blanks
183SAI AS/NZS ISO 13666-20112011-04-07EnglishOphthalmic optics—Spectacle lenses—Vocabulary
184SAI AS/NZS ISO 14889-20112011-04-07EnglishOphthalmic optics—Spectacle lenses—Fundamental requirements for uncut finished lenses
185SAI AS/NZS ISO 8980.1-20112011-04-07EnglishOphthalmic optics—Uncut finished spectacle lenses Part 1: Specifications for single-vision and multifocal lenses
186SAI AS/NZS ISO 21987-20112011-04-07EnglishOphthalmic optics—Mounted spectacle lenses
187SAI AS/NZS 2041.2-20112011-04-04EnglishBuried corrugated metal structures Part 2: Installation
188SAI AS 6183-20112011-04-01EnglishFire protection equipment—Carbon dioxide extinguishing systems for use on premises—Design and installation
189SAI AS/NZS 3003-20112011-04-01EnglishElectrical installations—Patient areas
190SAI AS/NZS 1170.2-20112011-03-30EnglishStructural design actions Part 2: Wind actions - Incorporating Amendment No. 1: September 2012; Amendment No. 2: December 2012; Amendment No. 3: July 2013
191SAI AS 61508.7-20112011-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Part 7: Overview of techniques and measures
192SAI AS 61508.4-20112011-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Part 4: Definitions and abbreviations
193SAI AS 61508.5-20112011-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Part 5: Examples of methods for the determination of safety integrity levels
194SAI AS 61508.2-20112011-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
195SAI AS 61508.6-20112011-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
196SAI AS 61508.1-20112011-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Part 1: General requirements
197SAI AS 61508.3-20112011-03-28EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems Part 3: Software requirements
198SAI AS 1603.17-20112011-03-22EnglishAutomatic fire detection and alarm systems Part 17: Warning equipment for people with hearing impairment
199SAI AS 2550.1-20112011-03-18EnglishCranes, hoists and winches—Safe use Part 1: General requirements
200SAI AS 5812-20112011-03-10EnglishManufacturing and marketing of pet food
201SAI AS/NZS 4490-20112011-02-24EnglishTimber-Solid-Stress-graded for structural purposes-Verification of properties - Incorporating Amendment No. 1: October 2012
202SAI AS 1417.1(INT)-20112011-02-24EnglishReceiving antennas for radio and television in the VHF and UHF broadcast bands Part 1: Design, manufacture and performance of outdoor terrestrial TV antennas
203SAI AS/NZS 1748.2-20112011-02-24EnglishTimber-Solid-Stress-graded for structural purposes Part 2: Qualification of grading method - Incorporating Amendment No. 1: October 2012
204SAI AS/NZS 1748.1-20112011-02-24EnglishTimber-Solid-Stress-graded for structural purposes Part 1: General requirements - Incorporating Amendment No. 1: 10/2012
205SAI AS/NZS 3678-20112011-02-21EnglishStructural steel - Hot-rolled plates, floorplates and slabs
206SAI AS/NZS 4602.1-20112011-02-17EnglishHigh visibility safety garments Part 1: Garments for high risk applications
207SAI AS 4647-20112011-02-15EnglishDiaphragm gas meters
208SAI AS 2896-20112011-02-08EnglishMedical gas systems—Installation and testing of non-flammable medical gas pipeline systems
209SAI AS/NZS 60950.1-20112011-02-08EnglishInformation technology equipment - Safety Part 1: General requirements - Incorporating Amendment 1: November 2012
210SAI AS 4825-20112011-02-01EnglishTunnel fire safety
211SAI AS 4558-20112011-01-27EnglishDecorative gas log and other fuel effect appliances
212SAI AS/NZS 4365-20112011-01-27EnglishRadiocommunications equipment used in the UHF citizen band radio service
213SAI AS/NZS CISPR 11-20112011-01-27EnglishIndustrial, scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement
214SAI AS 2870-20112011-01-17EnglishResidential slabs and footings
215SAI AS/NZS ISO/IEC/IEEE 42010-20112011-01-01EnglishRailway Rolling Stock - Suspension – Infrastructure Maintenance - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide
216SAI AS/NZS ISO/IEC/IEEE 42010-20112011-01-01EnglishRailway Rolling Stock - Suspension – Locomotive - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide
217SAI AS/NZS ISO/IEC/IEEE 42010-20112011-01-01EnglishRailway Rolling Stock - Suspension – Passenger Rolling Stock - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide
218SAI AS/NZS ISO/IEC/IEEE 42010-20112011-01-01EnglishRailway Rolling Stock - Suspension – Passenger - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide
219SAI AS/NZS ISO/IEC/IEEE 42010-20112011-01-01EnglishRailway Rolling Stock - Suspension – Freight - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide
220SAI HB 141-20112011-01-01EnglishRisk Financing Guidelines
221SAI AS/NZS 4552.2-20102010-12-24EnglishGas fired water heaters for hot water supply and/or central heating Part 2: Minimum energy performance standards for gas water heaters
222SAI AS/NZS 5125.1-20102010-12-23EnglishHeat pump water heaters—Performance assessment Part 1: Air source heat pump water heaters
223SAI AS 4773.2-20102010-12-13EnglishMasonry in small buildings Part 2: Construction
224SAI AS 1603.11-20102010-12-07EnglishAutomatic fire detection and alarm systems Part 11: Visual warning devices
225SAI AS 5013.14.1-20102010-12-03EnglishFood microbiology Method 14.1: Microbiology of food and animal feeding stuffs—General requirements and guidance for microbiological examinations
226SAI AS 5156-20102010-12-03EnglishElectronic speed limit signs
227SAI AS/NZS 4364-20102010-12-01EnglishTimber—Bond performance of structural adhesives
228SAI AS/NZS 7000-20102010-11-26EnglishOverhead line design—Detailed procedures
229SAI AS/NZS 3679.2-20102010-11-26EnglishStructural steel Part 2: Welded I sections
230SAI AS 3745-20102010-11-25EnglishPlanning for emergencies in facilities - Incorporating Amendment 1: May 2014
231SAI AS 4741-20102010-11-22EnglishTesting of connections to low voltage electricity networks
232SAI AS/NZS 4509.2-20102010-11-22EnglishStand-alone power systems Part 2: System design
233SAI AS/NZS 2041.6-20102010-11-17EnglishBuried corrugated metal structures Part 6: Bolted plate structures
234SAI AS 3818.8-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 8: Stumps and sole plates
235SAI AS 3818.7-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 7: Large cross-section sawn hardwood engineering timbers
236SAI AS 3818.9-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 9: Natural round treated hardwood corbels, girders and stringers
237SAI AS 3818.6-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 6: Decking for wharves and bridges
238SAI AS 3818.10-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 10: Building poles
239SAI AS 3818.4-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 4: Cross-arms for overhead lines
240SAI AS 3818.2-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 2: Railway track timbers
241SAI AS 3818.3-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 3: Piles
242SAI AS 3818.5-20102010-11-15EnglishTimber—Heavy structural products—Visually graded Part 5: Mine lift guides
243SAI ATS 5200.016-20102010-11-09EnglishTechnical Specification for plumbing and drainage products Part 016: Cistern inlet valves
244SAI AS 3740-20102010-11-05EnglishWaterproofing of domestic wet areas - Incorporating Amendment No.1: December 2012
245SAI AS/NZS 60335.2.89-20102010-10-29EnglishHousehold and similar electrical appliances-Safety Part 2.89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor - Incorporating Amendment 1: June 2013
246SAI AS/NZS 60335.2.24-20102010-10-29EnglishHousehold and similar electrical appliances-Safety Part 2.24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers - Incorporating Amendment 1: June 2013
247SAI AS/NZS 60335.2.13-20102010-10-29EnglishHousehold and similar electrical appliances—Safety Part 2.13: Particular requirements for deep fat fryers, frying pans and similar appliances
248SAI AS/NZS 60335.2.27-20102010-10-29EnglishHousehold and similar electrical appliances—Safety Part 2.27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
249SAI AS 4428.3-20102010-10-28EnglishFire detection, warning, control and intercom systems—Control and indicating equipment Part 3: Fire brigade panel
250SAI AS 3972-20102010-10-22EnglishGeneral purpose and blended cements
251SAI AS 1210-20102010-10-19EnglishPressure vessels - Incorporating Amendment 1: November 2013
252SAI ATS 5200.491-20102010-10-18EnglishTechnical Specification for plumbing and drainage products Part 491: Aluminium alloy piping system with plastics lining for plumbing water service applications
253SAI AS 5185-20102010-10-14EnglishProtocol for Lightweight Authentication of IDentity (PLAID)
254SAI AS 3565.1-20102010-09-30EnglishMeters for cold and heated drinking and non-drinking water supplies Part 1: Technical requirements
255SAI AS/NZS 3760-20102010-09-30EnglishIn-service safety inspection and testing of electrical equipment - Incorporating Amendment No. 1: 04/2011; Incorporating Amendment No. 2: 12/2012
256SAI AS 2879.3-20102010-09-28EnglishAlumina Part 3: Determination of alpha alumina content by X-ray diffraction
257SAI AS 1725.1-20102010-09-21EnglishChain link fabric fencing Part 1: Security fences and gates—General requirements
258SAI AS 1725.5-20102010-09-21EnglishChain link fabric fencing Part 5: Sports ground fencing—General requirements
259SAI AS 1725.4-20102010-09-21EnglishChain link fabric fencing Part 4: Cricket net fencing enclosures
260SAI AS 1725.3-20102010-09-21EnglishChain link fabric fencing Part 3: Tennis court fencing—Private/Residential
261SAI AS 1725.2-20102010-09-21EnglishChain link fabric fencing Part 2: Tennis court fencing—Commercial
262SAI AS/NZS 1906.4-20102010-09-20EnglishRetroreflective materials and devices for road traffic control purposes Part 4: High-visibility materials for safety garments - Incorporating Amendment No 1: May 2014
263SAI AS 4349.3-20102010-09-20EnglishInspection of buildings Part 3: Timber pest inspections
264SAI AS/NZS 2243.3-20102010-09-17EnglishSafety in laboratories Part 3: Microbiological safety and containment
265SAI AS 2300.2.6-20102010-09-03EnglishMethods of chemical and physical testing for the dairying industry Method 2.6: Liquid milks—Determination of lactose
266SAI AS/NZS 4455.2-20102010-09-02EnglishMasonry units, pavers, flags and segmental retaining wall units Part 2: Pavers and flags
267SAI AS/NZS 2210.1-20102010-09-01EnglishSafety, protective and occupational footwear Part 1: Guide to selection, care and use
268SAI AS 5013.0-20102010-09-01EnglishFood microbiology Part 0: General introduction to the Australian Standard methods for food microbiology
269SAI AS 2118.3-20102010-08-20EnglishAutomatic fire sprinkler systems Part 3: Deluge systems
270SAI AS 2118.2-20102010-08-20EnglishAutomatic fire sprinkler systems Part 2: Drencher systems
271SAI AS/NZS 7671-20102010-08-19EnglishPlastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polypropylene (PP)
272SAI AS/NZS 7671-20102010-08-19EnglishPlastics piping systems for soil and waste discharge (low and high temperature) inside buildings - Polypropylene (PP) - Incorporating Amendment No. 1: 04/2013
273SAI AS 1597.1-20102010-08-18EnglishPrecast reinforced concrete box culverts Part 1: Small culverts (not exceeding 1200 mm span and 1200 mm height)
274SAI AS/NZS 2041.4-20102010-08-10EnglishBuried corrugated metal structures Part 4: Helically formed sinusoidal pipes
275SAI AS 4083-20102010-08-09EnglishPlanning for emergencies—Health care facilities
276SAI AS 5804.1-20102010-08-09EnglishHigh-voltage live working Part 1: General
277SAI AS 5804.2-20102010-08-09EnglishHigh-voltage live working Part 2: Glove and barrier work
278SAI AS 5804.3-20102010-08-09EnglishHigh-voltage live working Part 3: Stick work
279SAI AS 5804.4-20102010-08-09EnglishHigh-voltage live working Part 4: Barehand work
280SAI AS 5810-20102010-07-26EnglishBiodegradable plastics—Biodegradable plastics suitable for home composting
281SAI AS/NZS 1927-20102010-07-26EnglishPedal bicycles-Safety requirements - Incorporating Amendment No.1: May 2014
282SAI AS/NZS 3679.1-20102010-07-20EnglishStructural steel Part 1: Hot-rolled bars and sections
283SAI AS/NZS 2845.1-20102010-06-30EnglishWater supply—Backflow prevention devices Part 1: Materials, design and performance requirements - Incorporating Amendment No. 1: June 3, 2014
284SAI AS 5044.1-20102010-06-30EnglishAGLS Metadata Standard Part 1: Reference description
285SAI AS 2845.3-20102010-06-30EnglishWater supply—Backflow prevention devices Part 3: Field testing and maintenance of testable devices - Incorporating Amendment 1: October 2010
286SAI AS 2845.2-20102010-06-30EnglishWater supply—Backflow preventions devices Part 2: Registered air gaps and registered break tanks
287SAI AS/NZS 4065-20102010-06-29EnglishConcrete utility services poles
288SAI AS/NZS 4677-20102010-06-29EnglishSteel utility services poles
289SAI AS/NZS 1337.1-20102010-06-28EnglishPersonal eye protection Part 1: Eye and face protectors for occupational applications - Incorporating Amendment No. 1: April 2012
290SAI AS/NZS 3012-20102010-06-22EnglishElectrical installations—Construction and demolition sites
291SAI AS 1720.1-20102010-06-21EnglishTimber structures Part 1: Design methods - Incorporating Amendment 1: December 2010
292SAI AS 1684.4-20102010-06-21EnglishResidential timber-framed construction Part 4: Simplified-Non-cyclonic areas - Incorporating Amendment No. 1: June 21, 2012
293SAI AS 1684.3 C3 SUPP 6-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C3 Supplement 6: Timber framing span tables-Wind classification C3-Seasoned softwood-Stress Grade MGP 15 - Supplement to AS 1684.3-2010; Incorporating Amendment No. 1: June 21, 2012
294SAI AS 1684.3 C3 SUPP 5-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C3 Supplement 5: Timber framing span Tables-Wind classification C3-Seasoned softwood-Stress Grade MGP 12 - Supplement to AS 1684.3-2010; Incorporating Amendment No. 1: June 21, 2012
295SAI AS 1684.3 C3 SUPP 4-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C3 Supplement 4: Timber framing span tables-Wind classification C3-Seasoned softwood-Stress Grade MGP 10 - Supplement to AS 1684.3-2010; Incorporating Amendment No. 1: June 21, 2012
296SAI AS 1684.2 N4 SUPP 5-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N4 Supplement 5: Timber framing span tables-Wind classification N4-Seasoned softwood-Stress Grade MGP 12 - Supplement to AS 1684.2-2010; Incorporating Amendment 1: June 21, 2012
297SAI AS 1684.3 C2 SUPP 6-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C2 Supplement 6: Timber framing span tables-Wind classification C2-Seasoned softwood-Stress Grade MGP 15 - Supplement to AS 1684.3-2010; Incorporating Amendment No. 1: June 21, 2012
298SAI AS 1684.3 C2 SUPP 5-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C2 Supplement 5: Timber framing span tables-Wind classification C2-Seasoned softwood-Stress Grade MGP 12 - Supplement to AS 1684.3-2010; Incorporating Amendment No. 1: June 21, 2012
299SAI AS 1684.3 C2 SUPP 4-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C2 Supplement 4: Timber framing span tables-Wind classification C2-Seasoned softwood-Stress Grade MGP 10 - Supplement to AS 1684.3-2010; Incorporating Amendment 1: June 21, 2012
300SAI AS 1684.3 C1 SUPP 6-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C1 Supplement 6: Timber framing span tables-Wind classification C1-Seasoned softwood-Stress Grade MGP 15 - Supplement to AS 1684.3-2010; Incorporating Amendment No. 1: June 21, 2012
301SAI AS 1684.3 C1 SUPP 5-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C1 Supplement 5: Timber framing span tables-Wind classification C1-Seasoned softwood-Stress Grade MGP 12 - Supplement to AS 1684.3-2010; Incorporating Amendment 1: June 21, 2012
302SAI AS 1684.3 C1 SUPP 4-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic areas C1 Supplement 4: Timber framing span tables-Wind classification C1-Seasoned softwood-Stress Grade MGP 10 - Supplement to AS 1684.3-2010; Incorporating Amendment 1: June 21, 2012
303SAI AS 1684.3-20102010-06-21EnglishResidential timber-framed construction Part 3: Cyclonic Areas - Incorporating Amendment No. 1: June 21, 2012
304SAI AS 1684.2 N4 SUPP 6-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N4 Supplement 6: Timber framing span tables-Wind classification N4-Seasoned softwood-Stress Grade MGP 15 - Supplement to AS 1684.2-2010; Incorporating Amendment No. 1: June 21, 2012
305SAI AS 1684.2 N4 SUPP 4-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N4 Supplement 4: Timber framing span Tables-Wind classification N4-Seasoned softwood-Stress Grade MGP 10 - Supplement to AS 1684.2-2010; Incorporating Amendment No. 1: June 21, 2012
306SAI AS 1684.2 N3 SUPP 6-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N3 Supplement 6: Timber framing span tables-Wind classification N3-Seasoned softwood-Stress Grade MGP 15 - Supplement to AS 1684.2-2010; Incorporating Amendment No. 1: June 21, 2012
307SAI AS 1684.2 N3 SUPP 5-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N3 Supplement 5: Timber framing span tables-Wind classification N3-Seasoned softwood-Stress Grade MGP 12 - Supplement to AS 1684.2-2010; Incorporating Amendment 1: June 21, 2012
308SAI AS 1684.2 N3 SUPP 4-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N3 Supplement 4: Timber framing span Tables-Wind classification N3-Seasoned softwood-Stress Grade MGP 10 - Supplement to AS 1684.2—2010; Incorporating Amendment No. 1: June 21, 2012
309SAI AS 1684.2 N1/N2 SUPP 6-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N1/N2 Supplement 6: Timber framing span tables-Wind classification N1/N2-Seasoned softwood-Stress Grade MGP 15 - Supplement to AS 1684.2-2010; Incorporating Amendment 1: June 21, 20
310SAI AS 1684.2 N1/N2 SUPP 5-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N1/N2 Supplement 5: Timber framing span tables-Wind classification N1/N2-Seasoned softwood-Stress Grade MGP 12 - Supplement to AS 1684.2-2010; Incorporating Amendment No. 1: June 21
311SAI AS 1684.2 N1/N2 SUPP 4-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-cyclonic areas N1/N2 Supplement 4: Timber framing span tables-Wind classification N1/N2-Seasoned softwood-Stress Grade MGP 10 - Supplement to AS 1684.2-2010; Incorporating Amendment 1: June 21, 20
312SAI AS 1684.2-20102010-06-21EnglishResidential timber-framed construction Part 2: Non-Cyclonic Areas - Incorporating Amendment No. 1: June 2012; Amendment No. 2: October 2013
313SAI AS/NZS 61558.2.16-20102010-05-31EnglishSafety of Power Transformers, Power Supplies, Reactors and Similar Products for supply voltages up to 1 100 V Part 2.16: Particular requirements for switch mode power supply units and transformers for switch mode power supply units - Incorporating Amendme
314SAI AS/NZS 60335.2.4-20102010-05-31EnglishHousehold and similar electrical appliances鈥擲afety Part 2.4: Particular requirements for spin extractors - Incorporating Amendment 1: October 2010
315SAI AS/NZS 60335.2.54-20102010-05-31EnglishHousehold and similar electrical appliances-Safety Part 2.54: Particular requirements for surface cleaning appliances for household use employing liquids or steam - Incorporating Amendment No. 1: October 2010
316SAI AS/NZS 60745.2.13-20102010-05-31EnglishHand-held motor-operated electric Tools鈥擲afety Part 2.13: Particular requirements for chain saws - Incorporating Amendment No. 1: January 2011
317SAI AS/NZS 61558.2.16-20102010-05-31EnglishSafety of Power Transformers, Power Supplies, Reactors and Similar Products for supply voltages up to 1 100 V Part 2.16: Particular requirements for switch mode power supply units and transformers for switch mode power supply units - Incorporating
318SAI AS/NZS 1337.0(INT)-20102010-05-26EnglishPersonal eye protection Part 0: Eye and face protectors-Vocabulary
319SAI AS/NZS 4583-20102010-04-12EnglishAmplitude modulated equipment for use in the aeronautical radio service in the frequency range 118 MHz to 137 MHz - Incorporating Amendment No. 1: 7/2012
320SAI AS/NZS 1254-20102010-04-06EnglishPVC-U pipes and fittings for stormwater and surface water applications - Incorporating Amendment 1: April 11, 2011; Incorporating Amendment 2: December 2013
321SAI AS 4176.2-20102010-03-30EnglishMultilayer pipes for pressure applications Part 2: Multilayer piping systems for hot and cold water plumbing applications — Pipes
322SAI AS 4176.1-20102010-03-30EnglishMultilayer pipes for pressure applications Part 1: Multilayer piping systems for hot and cold water plumbing applications — General
323SAI AS 4176.8-20102010-03-30EnglishMultilayer pipes for pressure applications Part 8: Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) — Specifications for systems
324SAI AS 4176.7-20102010-03-30EnglishMultilayer pipes for pressure applications Part 7: Multilayer piping systems for hot and cold water plumbing applications — Assessment of conformity
325SAI AS 4176.5-20102010-03-30EnglishMultilayer pipes for pressure applications Part 5: Multilayer piping systems for hot and cold water plumbing applications — Fitness for purpose of the system
326SAI AS 4176.3-20102010-03-30EnglishMultilayer pipes for pressure applications Part 3: Multilayer piping systems for hot and cold water plumbing applications — Fittings
327SAI AS/NZS 1576.1-20102010-03-19EnglishScaffolding Part 1: General requirements
328SAI AS 3569-20102010-03-19EnglishSteel wire ropes-Product specification - Incorporating Amendment No. 1: 10/2012
329SAI AS/NZS 2967-20102010-03-16EnglishOptical fibre communication cabling systems safety
330SAI ATS 5822-20102010-03-11EnglishE-health secure message delivery - Incorporating Amendment No. 1: April 2010; Amendment No. 2: November 2010
331SAI ATS 5820-20102010-03-05EnglishE-health web services profiles - Incorporating Amendment No. 1: November 2010
332SAI TR 5823-20102010-03-05EnglishEndpoint location service - Incorporating Amendment No. 1: November 2010
333SAI ATS 5821-20102010-03-05EnglishE-health XML secured payload profiles - Incorporating Amendment No. 1: November 2010
334SAI AS/NZS 4869.2-20102010-02-26EnglishStand alone maritime survivor locating systems (MSLS) Part 2: Operating on frequencies other than 121.5 MHz - Incorporating Amendment 1: August 2013
335SAI AS/NZS 8016(INT)-20102010-02-18EnglishCorporate governance of projects involving information technology investments
336SAI AS/NZS 4879.2-20102010-02-16EnglishPerformance of transformers and electronic step-down convertors for ELV lamps Part 2: Minimum Energy Performance Standards (MEPS) requirements
337SAI TR 2964-20102010-02-11EnglishRepresenting archetyped data in HL7 Version 2 - Incorporating Amendment 1: November 2010
338SAI ATS 5201-20102010-02-02EnglishAustralian diagnostic—Pathology and radiology—Reporting profile - Incorporating Amendment No. 1: November 2010
339SAI AS 3610.1-20102010-02-02EnglishFormwork for concrete Part 1: Documentation and surface finish
340SAI TR 5202-20102010-02-02EnglishStandardization of LOINC Terminology in Australian Laboratories for Pathology Reporting - Incorporating Amendment No. 1: November 2010
341SAI AS/NZS 2195-20102010-02-02EnglishFolding cots-Safety requirements - Incorporating Amendment No. 1: July 2013
342SAI AS/NZS 4994.3-20102010-01-08EnglishTemporary edge protection Part 3: Installation and dismantling for edges other than roof edges
343SAI AS/RISSB 7514.3-20102010-01-01EnglishRailway Rolling Stock - Wheels - Passenger
344SAI HB 327-20102010-01-01EnglishCommunicating and consulting about risk
345SAI AS/RISSB 7514.1-20102010-01-01EnglishRailway Rolling Stock - Wheels - Locomotive
346SAI HB 246-20102010-01-01EnglishGuidelines for managing risk in sport and recreation organizations
347SAI AS/RISSB 7660-20102010-01-01EnglishRailway Network Control Mobile Communication Systems
348SAI AS/RISSB 7630-20102010-01-01EnglishRailway Infrastructure - Track Classification
349SAI AS/RISSB 7514.2-20102010-01-01EnglishRailway Rolling Stock - Wheels - Freight
350SAI AS/RISSB 7524.3-20102010-01-01EnglishRailway Rolling Stock - Drawgear - Passenger Rolling Stock
351SAI AS/RISSB 7524.2-20102010-01-01EnglishRailway Rolling Stock - Drawgear - Freight Rolling Stock
352SAI HB 266-20102010-01-01EnglishGuide for managing risk in not-for-profit organizations
353SAI AS/RISSB 7524.1-20102010-01-01EnglishRailway Rolling Stock - Drawgear - Locomotive Rolling Stock
354SAI AS/RISSB 7514.4-20102010-01-01EnglishRailway Rolling Stock - Wheels - Infrastructure Maintenance
355SAI HB 158-20102010-01-01EnglishDelivering assurance based on ISO 31000:2009 Risk management—Principles and guidelines
356SAI AS 3600-20092009-12-23EnglishConcrete structures - Incorporating Amendment No. 1: November 2010; Incorporating Amendment No. 2: March 2013
357SAI AS 3600-20092009-12-23EnglishConcrete structures - Incorporating Amendment No. 1: November 2010
358SAI AS/NZS 4967-20092009-12-18EnglishProtective clothing for firefighters— Requirements and test methods for protective clothing used for structural firefighting - Incorporating Amendment No. 1: August 2010
359SAI AS/NZS 4417.1-20092009-12-11EnglishMarking of electrical and electronic products to indicate compliance with regulations Part 1: General rules for use of the mark
360SAI AS ISO 26362-20092009-12-10EnglishAccess panels in market, opinion and social research—Vocabulary and service requirements
361SAI AS/NZS 1299-20092009-12-09EnglishElectrical equipment for mines and quarries-Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV - Incorporating Amendment 1: March 2012
362SAI AS/NZS 1300-20092009-12-09EnglishElectrical equipment for mines and quarries-Bolted explosion-protected three-phase cable coupling devices - Incorporating Amendment 1: March 2012
363SAI AS/NZS 1428.4.1-20092009-12-03EnglishDesign for access and mobility Part 4.1: Means to assist the orientation of people with vision impairment — Tactile ground surface indicators - Incorporating Amendment No. 1: November 2010
364SAI AS 1428.1-20092009-11-27EnglishDesign for access and mobility Part 1: General requirements for access—New building work - Incorporating Amendment 1: November 2010
365SAI AS/NZS 4935-20092009-11-17EnglishDomestic furniture-Freestanding chests of drawers, wardrobes and bookshelves/bookcases-Determination of stability - Incorporating Amendment No. 1: June 2013
366SAI AS 2159-20092009-11-04EnglishPiling—Design and installation - Incorporating Amendment 1: October 2010
367SAI AS/NZS 1576.2-20092009-11-02EnglishScaffolding Part 2: Couplers and accessories
368SAI AS/NZS 61558.2.6-20092009-10-30EnglishSafety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Part 2.6: Particular requirements for safety isolating transformers and power supply units incorporating safety isolating transformers -
369SAI AS/NZS 60335.2.30-20092009-10-30EnglishHousehold and similar electrical appliances鈥擲afety Part 2.30: Particular requirements for room heaters - Incorporating Amendment No. 1: October 2010
370SAI AS/NZS 3160-20092009-10-30EnglishApproval and test specification-Hand-held portable electric tools - Incorporating Amendment No. 1: October 2012
371SAI AS/NZS 61558.2.4-20092009-10-30EnglishSafety of power transformers, power supplies, reactors and similar products for supply voltages up to 1 100 V Part 2.4: Particular requirements and tests for isolating transformers and power supply units incorporating transformers - Incorporating
372SAI AS/NZS 3100-20092009-10-30EnglishApproval and test specification-General requirements for electrical equipment - Incorporating Amendment No. 1: October 2010; Amendment No. 2: October 2012
373SAI AS 1799.1-20092009-10-23EnglishSmall craft Part 1: General requirements for power boats - Incorporating Amendment 1: May 2010; Amendment 2: September 2010
374SAI MP 100-20092009-10-09EnglishProcedures for certifcation of organic and biodynamic products - Incorporating Amendment 1: November 2010, Incorporating Amendment 2: September 2013
375SAI AS 6000-20092009-10-09EnglishOrganic and biodynamic products - Incorporating Amendment No. 1: February 2011; Incorporating Amendment No. 2: September 2012; Incorporating Amendment No. 3: August 2013
376SAI MP 100-20092009-10-09EnglishProcedures for certifcation of organic and biodynamic products - Incorporating Amendment 1: November 2010
377SAI AS/NZS 4994.2-20092009-10-02EnglishTemporary edge protection Part 2: Roof edge protection—Installation and dismantling
378SAI AS/NZS 4994.1-20092009-09-22EnglishTemporary edge protection Part 1: General requirements
379SAI AS/NZS 60079.10.1-20092009-09-18EnglishExplosive atmospheres Part 10.1: Classification of areas - Explosive gas atmospheres - Incorporating Amendment 1: November 2013
380SAI AS/NZS 4240.2-20092009-09-17EnglishRemote control systems for mining equipment Part 2: Operation and maintenance for underground metalliferous mining
381SAI AS 2865-20092009-09-04EnglishConfined spaces
382SAI AS 4970-20092009-08-26EnglishProtection of trees on development sites - Incorporating Amendment 1: March 2010
383SAI AS/NZS CISPR 22-20092009-08-21EnglishInformation technology equipment—Radio disturbance characteristics—Limits and methods of measurement - Incorporating Amendment No. 1: December 2010
384SAI AS ISO 15189-20092009-08-11EnglishMedical laboratories—Particular requirements for quality and competence
385SAI AS 4684-20092009-08-11EnglishHigh chairs—Safety requirements
386SAI AS 3533.1-20092009-07-31EnglishAmusement rides and devices Part 1: Design and construction - Incorporating Amendment 1: December 23, 2011
387SAI AS 3533.1-20092009-07-31EnglishAmusement rides and devices Part 1: Design and construction
388SAI AS 3533.2-20092009-07-31EnglishAmusement rides and devices Part 2: Operation and maintenance
389SAI AS 3533.2-20092009-07-31EnglishAmusement rides and devices Part 2: Operation and maintenance - Incorporating Amendment : December 23, 2011
390SAI AS 5013.10-20092009-07-24EnglishFood microbiology Method 10: Microbiology of food and animal feeding stuffs—Horizontal method for the detection of Salmonella spp.
391SAI AS 60034.7-20092009-07-15EnglishRotating electrical machines Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code)
392SAI AS 60034.1-20092009-07-15EnglishRotating electrical machines Part 1: Rating and performance
393SAI AS 60034.5-20092009-07-15EnglishRotating electrical machines Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP Code)—Classification
394SAI AS 60034.8-20092009-07-15EnglishRotating electrical machines Part 8: Terminal markings and direction of rotation
395SAI AS 60034.9-20092009-07-15EnglishRotating electrical machines Part 9: Noise limits
396SAI AS 60034.11-20092009-07-15EnglishRotating electrical machines Part 11: Thermal protection
397SAI AS 60034.12-20092009-07-15EnglishRotating electrical machines Part 12: Starting performance of singlespeed three-phase cage induction motors
398SAI AS 60034.17-20092009-07-15EnglishRotating electrical machines Part 17: Cage induction motors when fed from converters—Application guide
399SAI AS 60034.26-20092009-07-15EnglishRotating electrical machines Part 26: Effects of unbalanced voltages on the performance of three-phase induction motors
400SAI AS/NZS 61000.2.4-20092009-07-15EnglishElectromagnetic compatibility (EMC) Part 2.4: Environment—Compatibility levels in industrial plants for low-frequency conducted disturbances
401SAI AS/NZS IEC/TR 61000.2.7-20092009-07-15EnglishElectromagnetic compatibility (EMC) Part 2.7: Environment—Low frequency magnetic fields in various environments
402SAI AS/NZS IEC/TR 61000.2.8-20092009-07-15EnglishElectromagnetic compatibility (EMC) Part 2.8: Environment—Voltage dips and short interruptions on public electric power supply systems with statistical measurement results
403SAI AS/NZS IEC/TR 61000.2.14-20092009-07-15EnglishElectromagnetic compatibility (EMC) Part 2.14: Environment—Overvoltages on public electricity distribution networks
404SAI AS 5013.27-20092009-07-14EnglishFood microbiology Method 27: Examination of specific products — Cultured dairy products
405SAI AS 5013.29-20092009-07-14EnglishFood microbiology Method 29: Examination for specific organisms — Colony count of yeasts and moulds
406SAI AS 5013.28-20092009-07-14EnglishFood microbiology Method 28: Examination of specific products — Liquid milks and creams
407SAI AS 4797-20092009-07-14EnglishStainless steel chain for lifting purposes
408SAI AS 5013.14.2-20092009-07-14EnglishFood microbiology Method 14.2: General procedures and techniques—Colony count—Membrane filtration method
409SAI AS/NZS 1158.4-20092009-07-03EnglishLighting for roads and public spaces Part 4: Lighting of pedestrian crossings
410SAI AS ISO 8009-20092009-06-30EnglishMechanical contraceptives—Reusable natural and silicone rubber contraceptive diaphragms — Requirements and tests
411SAI AS 2168.1-20092009-06-30EnglishNon-destructive testing—Computerized radiography Part 1: Systems
412SAI AS 2168.2-20092009-06-30EnglishNon-destructive testing—Computerized radiography Part 2: Testing of metallic materials using X-rays and gamma rays
413SAI AS 5074-20092009-06-30EnglishNatural latex rubber condoms—Requirements and test methods
414SAI AS 4654.2-20092009-06-30EnglishWaterproofing membrane systems for exterior use—Above ground level Part 2: Design and installation
415SAI AS/NZS 1260-20092009-06-16EnglishPVC-U pipes and fittings for drain, waste and vent application - Incorporating Amendment 1: April 11, 2011; Incorporating Amendment 2: December 2013
416SAI AS/NZS 60335.2.11-20092009-05-29EnglishHousehold and similar electrical appliances—Safety Part 2.11: Particular requirements for tumble dryers - Incorporating Amendment No. 1: May 2010
417SAI AS 1952-20092009-05-19EnglishDispensing measures-Pharmaceutical-Glass - Incorporating Amendment No. 1: 12/2012
418SAI AS 3778.1-20092009-05-04EnglishMeasurement of water flow in open channels Part 1: Hydrometric determinations — Vocabulary and symbols
419SAI AS 5602-20092009-04-22EnglishRefined petroleum products—Vehicle bottom loading and vapour recovery
420SAI AS/NZS 4474.2-20092009-04-08EnglishPerformance of household electrical appliances-Refrigerating appliances Part 2: Energy labelling and minimum energy performance standard requirements - Incorporating Amendment 1: March 2011; Amendment 2: January 2014
421SAI AS 1289.5.8.4-20092009-04-03EnglishMethods of testing soils for engineering purposes Method 5.8.4: Soil compaction and density tests-Nuclear surface moisture-density gauges-Calibration using standard blocks - Incorporating Amendment No. 1: 10/2012
422SAI AS 4904-20092009-03-20EnglishConsultants agreement-Design and construct - Incorporating Amendment 1: January 2010
423SAI AS/NZS 1850-20092009-03-20EnglishPortable fire extinguishers—Classification, rating and performance testing
424SAI AS 3959-20092009-03-10EnglishConstruction of buildings in bushfire-prone areas - Incorporating Amendment 1: November 2009; Amendment 2: February 2011; Amendment 3: November 2011
425SAI AS 2805.14.2-20092009-02-11EnglishElectronic funds transfer— Requirements for interfaces Part 14.2: Secure cryptographic devices (retail)—Security compliance checklists for devices used in financial transactions
426SAI AS 1742.3-20092009-01-28EnglishManual of uniform traffic control devices Part 3: Traffic control for works on roads
427SAI AS/RISSB 7507.4-20092009-01-01EnglishRailway Rolling Stock - Rolling Stock Outlines - Infrastructure Maintenance Rolling Stock
428SAI AS/RISSB 7509.1-20092009-01-01EnglishRailway Rolling Stock - Dynamic Behaviour - Locomotive Rolling Stock
429SAI AS/RISSB 7508.1-20092009-01-01EnglishRailway Rolling Stock - Track Forces and Stresses - Locomotive
430SAI AS/RISSB 7508.2-20092009-01-01EnglishRailway Rolling Stock - Track Forces and Stresses - Freight Rolling Stock
431SAI AS/RISSB 7508.3-20092009-01-01EnglishRailway Rolling Stock - Track Forces and Stresses - Passenger
432SAI AS/RISSB 7508.4-20092009-01-01EnglishRailway Rolling Stock - Track Forces and Stresses - Infrastructure Maintenance Rolling Stock
433SAI AS/RISSB 7507.2-20092009-01-01EnglishRailway Rolling Stock - Rolling Stock Outlines - Freight Rolling Stock
434SAI AS/RISSB 7507.1-20092009-01-01EnglishRailway Rolling Stock - Rolling Stock Outlines - Locomotive Rolling Stock
435SAI AS/RISSB 7507.3-20092009-01-01EnglishRailway Rolling Stock - Rolling Stock Outlines - Passenger Rolling Stock
436SAI AS/RISSB 7509.3-20092009-01-01EnglishRailway Rolling Stock – Dynamic Behaviour - Passenger Rolling Stock
437SAI AS/RISSB 7509.2-20092009-01-01EnglishRailway Rolling Stock – Dynamic Behaviour - Freight Rolling Stock
438SAI AS/RISSB 7509.4-20092009-01-01EnglishRailway Rolling Stock – Dynamic Behaviour - Infrastructure Maintenance Rolling Stock
439SAI AS/NZS 4645.3-20082008-12-31EnglishGas distribution networks Part 3: Plastics pipe systems - Incorporating Amendment No. 1: July 2010; Incorporating Amendment No. 2: May 2012
440SAI AS/NZS 2754.1(INT)-20082008-12-31EnglishAdhesives for timber and timber products Part 1: Adhesives for manufacture of plywood and laminated veneer lumber (LVL)
441SAI AS 4226-20082008-12-23EnglishGuidelines for safe housing design
442SAI AS 1049.2-20082008-12-11EnglishTelecommunication cables—Insulation, sheath and jacket Part 2: Test methods - Incorporating Amendment No. 1: July 2010
443SAI AS/NZS 3001-20082008-12-05EnglishElectrical installations—Transportable structures and vehicles including their site supplies
444SAI AS/NZS 3002-20082008-12-05EnglishElectrical installations—Shows and carnivals
445SAI AS/NZS 3001-20082008-12-05EnglishElectrical installations-Transportable structures and vehicles including their site supplies - Incorporating Amendment No. 1: June 2012
446SAI AS/NZS 61558.2.7-20082008-10-31EnglishSafety of power transformers, power supply units and similar Part 2.7: Particular requirements for transformers and power supplies for toys - Reissued Incorporating Amendment No. 1: June 2012
447SAI AS/NZS 3133-20082008-10-21EnglishApproval and test specification—Air-break switches
448SAI AS/NZS ISO 19131-20082008-09-16EnglishGeographic information-Data product specifications - Incorporating Amendment 1: October 2012
449SAI AS 2885.0-20082008-08-05EnglishPipelines-Gas and liquid petroleum Part 0: General requirements - Incorporating Amendment 1: 20, September 2012
450SAI AS/NZS 4129-20082008-06-30EnglishFittings for polyethylene (PE) pipes for pressure applications - Incorporating Amendment 1: December 2013
451SAI ATS 4747.1-20082008-06-30EnglishMeters for non-urban water supply Part 1: Glossary of terms
452SAI AS 4969.1-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 1: Pre-treatment of samples
453SAI AS 4969.2-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 2: Determination of pHKCl and titratable actual acidity (TAA)
454SAI AS 4969.4-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 4: Determination of 1 M potassium chloride extractable sulfur (SKCl), calcium (CaKCl) and magnesium (MgKCl)
455SAI AS 4969.5-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 5: Determination of peroxide sulfur (SP), calcium (CaP) and magnesium (MgP)
456SAI AS 4969.6-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 6: Determination of acid extractable sulfur in soil residue after peroxide oxidation (SRAS)
457SAI AS 4969.7-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 7: Determination of chromium reducible sulfur (SCR)
458SAI AS 4969.8-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 8: Determination of hydrochloric acid extractable sulfur (SHCl), calcium (CaHCl) and magnesium (MgHCl)
459SAI AS 4969.9-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 9: Calculation of titratable sulfidic acidity (TSA)
460SAI AS 4969.10-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 10: Calculation of peroxide oxidizable sulfur (SPOS), reacted calcium (CaA) and reacted magnesium (MgA)
461SAI AS 4969.11-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 11: Calculation of net acid-soluble sulfur (SNAS), calcium (CaNAS) and magnesium (MgNAS)
462SAI AS 5200.007-20082008-06-30EnglishPlumbing and drainage products Part 007: Metal-bodied water hammer arresters
463SAI AS 5200.037.2-20082008-06-30EnglishPlumbing and drainage products Part 037.2: Flow controllers for use with heated or cold water systems
464SAI AS/NZS 4455.1-20082008-06-30EnglishMasonry units, pavers, flags and segmental retaining wall units Part 1: Masonry units
465SAI AS/NZS 4455.3-20082008-06-30EnglishMasonry units, pavers, flags and segmental retaining wall units Part 3: Segmental retaining wall units
466SAI AS/NZS 4501.1-20082008-06-30EnglishOccupational protective clothing Part 1: Guidelines on the selection, use, care and maintenance of protective clothing
467SAI AS/NZS 4864.1-20082008-06-30EnglishPerformance of refrigerated beverage vending machines Part 1: Test methods—Energy performance
468SAI AS/NZS 4864.2-20082008-06-30EnglishPerformance of refrigerated beverage vending machines Part 2: Minimum energy performance standard (MEPS) requirements
469SAI AS/NZS 4879.1-20082008-06-30EnglishPerformance of transformers and electronic step-down convertors for ELV lamps Part 1: Test method—Energy performance
470SAI AS 4969.0-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Part 0: Introduction and definitions, symbols and acronyms
471SAI AS 4553-20082008-06-30EnglishGas space heating appliances - Incorporating Amendment 1: February 2011
472SAI AS 4551-20082008-06-30EnglishDomestic gas cooking appliances - Incorporating Amendment No. 1: December 2, 2009; Amendment No. 2: June 27, 2012
473SAI AS 3597-20082008-06-30EnglishStructural and pressure vessel steel — Quenched and tempered plate
474SAI AS 2805.12.3-20082008-06-30EnglishElectronic funds transfer—Requirements for interfaces Part 3: Maintenance procedures for messages, data elements and code values
475SAI ATS 4747.2-20082008-06-30EnglishMeters for non-urban water supply Part 2: Specification for closed conduit meters fully charged
476SAI ATS 4747.3-20082008-06-30EnglishMeters for non-urban water supply Part 3: Specifications for open channel meters
477SAI ATS 4747.5-20082008-06-30EnglishMeters for non-urban water supply Part 5: Installation and commissioning of closed conduit meters fully charged
478SAI ATS 4747.6-20082008-06-30EnglishMeters for non-urban water supply Part 6: Installation and commissioning of open channel meters
479SAI AS 4969.3-20082008-06-30EnglishAnalysis of acid sulfate soil—Dried samples—Methods of test Method 3: Determination of peroxide pH (pHOX), titratable peroxide acidity (TPA) and excess acid neutralizing capacity (ANCE)
480SAI AS 4123.5-20082008-06-30EnglishMobile waste containers Part 5: Performance requirements and test methods
481SAI AS 4123.4-20082008-06-30EnglishMobile waste containers Part 4: Containers with four wheels with a capacity from 750 L to 1700 L with flat lid(s), for wide trunnion or BG and/or wide comb lifting devices—Dimensions and design
482SAI AS 4123.3-20082008-06-30EnglishMobile waste containers Part 3: Containers with four wheels with a capacity from 770 L to 1300 L with dome lid(s), for trunnion and/or lifting devices—Dimensions and design
483SAI AS 4123.2-20082008-06-30EnglishMobile waste containers Part 2: Containers with four wheels with a capacity from 500 L to 1200 L with flat lid(s), for trunnion and/or lifting devices—Dimensions and design
484SAI AS 4123.1-20082008-06-30EnglishMobile waste containers Part 1: Containers with two wheels and a capacity up to 400 L for lifting devices—Dimensions and design
485SAI AS 4024.3101-20082008-06-30EnglishSafety of machinery Part 3101: Materials cutting—Milling machines (including boring machines) — Safety requirements
486SAI AS 1141.11.2-20082008-06-30EnglishMethods for sampling and testing aggregates Method 11.2: Particle size distribution for vision sizing systems
487SAI AS 1141.65-20082008-06-30EnglishMethods for sampling and testing aggregates Method 65: Alkali aggregate reactivity—Qualitative petrological screening for potential alkali-silica reaction
488SAI AS 5100.3 SUPP 1-20082008-06-26EnglishBridge design—Foundations and soil-supporting structures—Commentary
489SAI AS/NZS ISO/IEC 18028.5-20082008-06-25EnglishInformation technology—Security techniques—IT network security Part 5: Securing communications across networks using virtual private networks
490SAI AS/NZS ISO/IEC 18028.1-20082008-06-25EnglishInformation technology—Security techniques—IT network security Part 1: Network security management
491SAI AS/NZS ISO/IEC 11770.3-20082008-06-25EnglishInformation technology—Security techniques—Key management Part 3: Mechanisms using asymmetric techniques
492SAI AS/NZS ISO/IEC 11770.2-20082008-06-25EnglishInformation technology—Security techniques—Key management Part 2: Mechanisms using symmetric techniques
493SAI AS/NZS ISO/IEC 9798.4-20082008-06-25EnglishInformation technology—Security techniques—Entity authentication Part 4: Mechanisms using a cryptographic check function
494SAI AS/NZS ISO 2801-20082008-06-25EnglishClothing for protection against heat and flame—General recommendations for selection, care and use of protective clothing
495SAI AS 2359.17-20082008-06-25EnglishPowered industrial trucks Part 17: Stability tests for rough terrain trucks
496SAI AS 4024.2801-20082008-06-25EnglishSafety of machinery Part 2801: Safety distances and safety gaps—Positioning of protective equipment with respect to the approach speed of parts of the human body
497SAI AS 2891.1.3-20082008-06-25EnglishMethods of sampling and testing asphalt Method 1.3: Sampling—Asphalt from slabs
498SAI AS 2891.1.2-20082008-06-25EnglishMethods of sampling and testing asphalt Method 1.2: Sampling—Coring method
499SAI AS 2891.1.1-20082008-06-25EnglishMethods of sampling and testing asphalt Method 1.1: Sampling—Loose asphalt
500SAI AS/NZS ISO/IEC 9798.2-20082008-06-25EnglishInformation technology—Security techniques—Entity authentication Part 2: Mechanisms using symmetric encipherment algorithms