| Pos | standard Number | publication date | Language | Description |
| 1 | SAE J936-1965 | 1965-12-01 | English | Methods of Residual Stress Measurement |
| 2 | SAE ARP892-1965 | 1965-11-20(R 1994) | English | D-C Starter-Generator, Engine, General Specification for,
DoD Adopted | ANSI Approved |
| 3 | SAE AS452A-1965 | 1965-10-01 | English | Oxygen Mask Assembly, Demand and Pressure Breathing, Crew - Reaffirmed Noncurrent October 2003 |
| 4 | SAE ARP835-1965 | 1965-10-01 | English | MINIMUM REQUIREMENTS FOR PALLET DOLLY |
| 5 | SAE J935-1965 | 1965-09-01(R 2009) | English | High-Strength Carbon and Alloy Die Drawn Steels |
| 6 | SAE AMS5669A-1965 | 1965-09-01(R 2008) | English | Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted |
| 7 | SAE AIR733A-1965 | 1965-09-01 | English | LIFE-SUPPORT SYSTEMS FOR MANNED SPACECRAFT |
| 8 | SAE ARP886-1965 | 1965-08-20 | English | SST GROUND HANDLING |
| 9 | SAE J931-1965 | 1965-07-01(R 1986) | English | Hydraulic Power Circuit Filtration
DoD Adopted |
| 10 | SAE J932-1965 | 1965-07-01(R 1985) | English | Definitions for Macrostrain and Microstrain
ANSI Approved |
| 11 | SAE AS827-1965 | 1965-05-01 | English | Aircraft Anti-Collision Lights |
| 12 | SAE AIR885-1965 | 1965-03-01 | English | Spark Calorimeter |
| 13 | SAE AMS2224C-1965 | 1965-02-15 | English | TOLERANCES Copper and Copper Alloy Wire |
| 14 | SAE AS436-1965 | 1965-02-01(R 2008) | English | Mach Meters (Turbine Powered Subsonic Aircraft) |
| 15 | SAE ARP497A-1965 | 1965-01-10(R 2010) | English | Precision Control Motors - 400 Cycles |
| 16 | SAE AMS3015-1965 | 1965-01-01(R 1995) | English | Nitrogen, Liquid Propellent Grade |
| 17 | SAE ARP846-1965 | 1965-01-01(R 1992) | English | Low Tension Spark Igniter Sparking Voltage Test |
| 18 | SAE ARP243B-1965 | 1965-01-01(R 1991) | English | Nomenclature, Aircraft Hydraulic and Pneumatic Systems
DoD Adopted |
| 19 | SAE ARP570A-1965 | 1965-01-01(R 1989) | English | Designation of Direction of Rotation of Helicopter Rotors |
| 20 | SAE AIR883-1965 | 1965-01-01(R 1985) | English | Ground Resonance Testing for Helicopters, Method of |
| 21 | SAE AMS3344A-1965 | 1965-01-01 | English | Silicone Rubber 1800 psi 45-55
ANSI Approved |
| 22 | SAE AIR875-1965 | 1965-01-01 | English | A COMPARISON OF GOVERNMENT RELAY SPEC. REQUIREMENTS |
| 23 | SAE AIR852-1965 | 1965-01-01 | English | METHODS OF COMPARING AIRCRAFT TAKEOFF & NOISES |
| 24 | SAE AS848-1964 | 1964-12-01(R 2012) | English | ATTACHMENT POINTS, ENGINE, REMOTE TRIMMING MAIN FUEL CONTROL |
| 25 | SAE AS848-1964 | 1964-12-01(R 2006) | English | Attachment Points, Engine, Remote Trimming Main Fuel Control |
| 26 | SAE AS654-1964 | 1964-10-30(R 1994) | English | Cable, Special Purpose, Electrical: Wire, Electrical (Ignition, High-Tension)
ANSI Approved |
| 27 | SAE J859-1964 | 1964-10-01(R 1992) | English | Numbering System for Designating Grades of Cast Ferrous Materials, Recommended Practice
ANSI Approved |
| 28 | SAE AIR769-1964 | 1964-09-15 | English | GROUND FAULT PROTECTION ON 400-CYCLE GROUND POWER UNITS |
| 29 | SAE ARP690-1964 | 1964-08-01(R 2013) | English | Standard Exposed Junction Thermocouple for Controlled Conduction Errors in Measurement of Air or Exhaust Gas Temperature |
| 30 | SAE ARP691-1964 | 1964-08-01(R 2013) | English | Recommended Ice Bath for Reference Junctions |
| 31 | SAE J899-1964 | 1964-08-01(R 2012) | English | Operators Seat Dimensions for Off-Road Self-Propelled Work Machines |
| 32 | SAE ARP820-1964 | 1964-08-01(R 2007) | English | Physical & Performance Tests for Type II (-65 to 275 F) O-Ring Packings, 3000 psi Hydraulic Service |
| 33 | SAE ARP690-1964 | 1964-08-01 | English | Standard Exposed Junction Thermocouple for Controlled Conduction Errors in Measurement of Air or Exhaust Gas Temperature |
| 34 | SAE ARP691-1964 | 1964-08-01 | English | Recommended Ice Bath for Reference Junctions |
| 35 | SAE AS840-1964 | 1964-07-01(R 1994) | English | Manual for the SAE 17.6 Cubic Inch Spark Plug Rating Engine Including Maintenance and Overhaul
ANSI Approved |
| 36 | SAE ARP816-1964 | 1964-06-20 | English | PRESSURE FUELING SIMULATOR FOR EVALUATING AIRCRAFT |
| 37 | SAE AIR15A-1964 | 1964-06-01 | English | DESIRED CHARACTERISTICS FOR HELICOPTER WHEELS, TIRES AND BRAKES |
| 38 | SAE AMS5644D-1964 | 1964-06-01 | English | Steel Bars and Forgings, Corrosion Heat Resistant 17Cr - 7Ni - 1Al - UNS S17700 |
| 39 | SAE J475A-1964 | 1964-06-01 | English | Screw Threads |
| 40 | SAE J690-1964 | 1964-05-01(R 1965) | English | Certificates of Maximum Net Horsepower for Motor Trucks and Truck Tractors
DoD Adopted |
| 41 | SAE AS441-1964 | 1964-04-20 | English | BANK AND PITCH INSTRUMENTS |
| 42 | SAE AMS7275-1964 | 1964-04-15 | English | RINGS, SEALING, SYNTHETIC RUBBER, SYNTHETIC LUBRICANT |
| 43 | SAE AIR32B-1964 | 1964-03-01 | English | COCKPIT VISIBILITY FOR COMMERCIAL TRANSP. AIRCRAFT |
| 44 | SAE AMS4218B-1964 | 1964-01-31 | English | ALUMINUM ALLOY CASTINGS, PREMIUM GRADE 7Si - 0.3Mg (A356) |
| 45 | SAE ARP691-1964 | 1964-01-01(R 1992) | English | Recommended Ice Bath for Reference Junctions |
| 46 | SAE ARP690-1964 | 1964-01-01(R 1992) | English | Standard Exposed Junction Thermocouple for Controlled Conduction Errors in Measurement of Air or Exhaust Gas Temperature |
| 47 | SAE ARP775-1963 | 1963-12-15 | English | Test Procedure to Determine Surge Potential of Ground Pressure Fueling Systems |
| 48 | SAE AS528-1963 | 1963-12-01 | English | ADAPTER-10.000 BOLT CIRCLE TO 4.125 PILOT DIAMETER |
| 49 | SAE AS527A-1963 | 1963-12-01 | English | Coupling - Forged Retainer - QAD - Reaffirmed Noncurrent October 2001 |
| 50 | SAE AS526A-1963 | 1963-12-01 | English | Coupling - Sheet Metal Retainer - QAD - Reaffirmed Noncurrent October 2001 |
| 51 | SAE AS525-1963 | 1963-12-01 | English | FLANGE ACCESSORY 9.000 PILOT DIAMETER - QAD |
| 52 | SAE AS524A-1963 | 1963-12-01 | English | Flange Accessory 6.500 Pilot Diameter - QAD - Reaffirmed Noncurrent October 2001 |
| 53 | SAE AS523A-1963 | 1963-12-01 | English | Flange Accessory 4.125 Pilot Diameter - QAD - Reaffirmed Noncurrent October 2001 |
| 54 | SAE AS522A-1963 | 1963-12-01 | English | Flange Accessory 3.000 Pilot Diameter - QAD - Reaffirmed Noncurrent October 2001 |
| 55 | SAE AS521-1963 | 1963-12-01 | English | DRIVE ACCESSORY 9.000 PILOT DIAMETER - QAD |
| 56 | SAE AS520A-1963 | 1963-12-01 | English | Drive Accessory 6.500 Pilot Diameter - QAD - Reaffirmed Noncurrent October 2001 |
| 57 | SAE AS519A-1963 | 1963-12-01 | English | Drive Accessory 4.125 Pilot Diameter - QAD - Reaffirmed Noncurrent October 2001 |
| 58 | SAE AS518A-1963 | 1963-12-01 | English | Drive Accessory 3.000 Pilot Diameter-QAD - Reaf. Noncur. January 2001 |
| 59 | SAE AS529A-1963 | 1963-12-01 | English | Adapter - 10.000 Bolt Circle to 6.500 Pilot Diameter - QAD - Reaffirmed Noncurrent October 2001 |
| 60 | SAE AS530A-1963 | 1963-12-01 | English | Adapter - 8.000 Bolt Circle to 4.125 Pilot Diameter - QAD - Reaffirmed Noncurrent October 2001 |
| 61 | SAE AIR732-1963 | 1963-10-15 | English | HEAT TRANSFER PROBLEMS ASSOCIATED WITH AEROSPACE VEHICLES |
| 62 | SAE AIR797E-1963 | 1963-09-01(R 2013) | English | Hose Characteristics and Selection Chart |
| 63 | SAE AIR797E-1963 | 1963-09-01(R 2007) | English | (R) Hose Characteristics and Selection Chart
DoD Adopted |
| 64 | SAE ARP461B-1963 | 1963-08-01(R 2008) | English | Synchros |
| 65 | SAE ARP739-1963 | 1963-08-01(R 2008) | English | Gas Power Servos and Reaction Control Systems |
| 66 | SAE AS3001-1963 | 1963-06-01(R 2005) | English | PLUG, MACHINE THREAD - AMS 5646, METAL GASKET, SILVER PLATED, REDUCED DIAMETER THREAD |
| 67 | SAE AS3000-1963 | 1963-06-01(R 2005) | English | PLUG, MACHINE THREAD - AMS 5646, METAL GASKET, REDUCED DIAMETER THREAD |
| 68 | SAE J863-1963 | 1963-06-01(R 1986) | English | Methods of Determining Plastic Deformation in Sheet Metal Stampings, Recommended Practice |
| 69 | SAE ARP367C-1963 | 1963-06-01 | English | AIRPLANE CABIN PRESSURIZATION |
| 70 | SAE J863-1963 | 1963-06-01 | English | Methods of Determining Plastic Deformation in Sheet Metal Stampings, Recommended Practice |
| 71 | SAE AS3000-1963 | 1963-06-01 | English | PLUG, MACHINE THREAD - AMS 5646, METAL GASKET, REDUCED DIAMETER THREAD |
| 72 | SAE ARP777-1963 | 1963-05-15(R 2008) | English | Gas Actuators (Linear and Vane Rotary Type) |
| 73 | SAE AS280-1963 | 1963-04-01 | English | WHEEL AND AXLE DIMENSIONS FOR TYPE VII TIRE-STUB (TAPERED) AXLE TYPE |
| 74 | SAE J856-1963 | 1963-04-01 | English | Connectors and Plugs, Standard |
| 75 | SAE ARP788-1963 | 1963-02-28 | English | Procedure For The Determination Of The Silting Index Of A Fluid |
| 76 | SAE AS473C-1963 | 1963-02-01 | English | Flange-Accessory, 10" Bolt Circle - Reaf. Noncur. January 2001 |
| 77 | SAE AS469B-1963 | 1963-02-01 | English | Drive-Accessory, 8" Bolt Circle - Reaffirmed Noncurrent May 2006 |
| 78 | SAE ARP761-1963 | 1963-01-15 | English | FORMAT, TEXT AND NUMBERING SYSTEM FOR MANUALS COVERING CIVIL AIRCRAFT GROUND SUPPORT EQUIPMENT |
| 79 | SAE AS127D-1963 | 1963-01-01(R 2012) | English | PROPELLER SHAFT END, FLANGED TYPE - NO. 1, 2, 3, 4, 5, & 6 |
| 80 | SAE ARP373B-1963 | 1963-01-01(R 2012) | English | Propeller Shaft Torque Ratings |
| 81 | SAE ARP373B-1963 | 1963-01-01(R 2006) | English | Propeller Shaft Torque Ratings |
| 82 | SAE AS127D-1963 | 1963-01-01(R 2006) | English | Propeller Shaft End, Flanged Type-No. 1, 2, 3, 4, 5, & 6 |
| 83 | SAE AIR768-1963 | 1963-01-01 | English | GUIDE FOR CUSTOMER FLIGHT CREW TRAINING/AIRFRAME |
| 84 | SAE AIR804-1963 | 1963-01-01 | English | BRAKE RELEASE RESPONSE TIME REQUIRED/SKID CONTROL |
| 85 | SAE ARP760-1963 | 1963-01-01 | English | 400-CYCLE GROUND POWER UNIT PROVISIONS FOR AIRCRAFT |
| 86 | SAE J448A-1963 | 1963-01-01 | English | Surface Texture |
| 87 | SAE AIR728A-1963 | 1963-01-01 | English | ELECTRONIC EQUIP. COOLING DESIGN CONCEPTS |
| 88 | SAE J449A-1963 | 1963-01-01 | English | Surface Texture Control |
| 89 | SAE ARP724-1962 | 1962-11-15 | English | PILOT'S CENTER INSTRUMENT OVERHEAD PANELS & FLIGHT |
| 90 | SAE AIR722-1962 | 1962-11-01 | English | INTEGRATED FLIGHT INSTRUMENTS & FLIGHT CONTROL SYS |
| 91 | SAE ARP763-1962 | 1962-10-15(R 2008) | English | Accumulators, Ground, Hydropneumatic Pressure
DoD Adopted |
| 92 | SAE AS534A-1962 | 1962-10-01 | English | Drive - 3/4 Generator - 10" BC - Male Pilot - Reaffirmed Noncurrent October 2001 |
| 93 | SAE AS532A-1962 | 1962-10-01 | English | Drive - 3/4 Generator - 8" BC - Male Pilot - Reaffirmed Noncurrent October 2001 |
| 94 | SAE AS535-1962 | 1962-10-01 | English | DRIVE-3/4 GENERATOR-10"BC-FEMALE PILOT |
| 95 | SAE AS533A-1962 | 1962-10-01 | English | Flange - 3/4 Generator 8" BC - Female Pilot - Reaffirmed Noncurrent October 2001 |
| 96 | SAE AS516A-1962 | 1962-10-01 | English | Adapter 10" to 8" Bolt Circle - Reaf. Noncur. January 2001 |
| 97 | SAE AS515A-1962 | 1962-10-01 | English | Adapter 10" to 5" Bolt Circle - Reaf. Noncur. January 2001 |
| 98 | SAE AS517A-1962 | 1962-10-01 | English | Adapter 8" to 5" Bolt Circle - Reaf. Noncur. January 2001 |
| 99 | SAE ARP762-1962 | 1962-09-15 | English | AIR INTAKE COVERS - AIRCRAFT |
| 100 | SAE AS462-1962 | 1962-09-01(R 2012) | English | SHAFTS FOR BALL BEARING RETAINING SPANNER NUTS AND KEY WASHERS |
| 101 | SAE AS462-1962 | 1962-09-01(R 2006) | English | SHAFTS FOR BALL BEARING RETAINING SPANNER NUTS AND KEY WASHERS |
| 102 | SAE AIR781-1962 | 1962-09-01(R 1994) | English | Guide for Determining Engine Starter Drive Torque Requirements
ANSI Approved |
| 103 | SAE J14-1962 | 1962-08-01 | English | SPECIFICATIONS FOR ELASTOMER COMPOUNDS FOR AUTOMOTIVE APPLICATIONS |
| 104 | SAE AIR31-1962 | 1962-08-01 | English | ENVIRONMENTAL CONDITIONS APPLICABLE TO TRANSPORT AIRCRAFT ELECTRICAL EQUIPMENT |
| 105 | SAE J824-1962 | 1962-06-01(R 1995) | English | Engine Rotation and Cylinder Numbering, Standard; |
| 106 | SAE ARP489A-1962 | 1962-06-01(R 1992) | English | Leads, Shielded, High Tension, Detachable Spark Plug |
| 107 | SAE J473A-1962 | 1962-06-01 | English | Solders |
| 108 | SAE J478A-1962 | 1962-06-01 | English | SLOTTED AND RECESSED HEAD SCREWS |
| 109 | SAE J830-1962 | 1962-04-01(R 1999) | English | Fuel Injection Equipment Nomenclature |
| 110 | SAE AS446-1962 | 1962-03-01(R 2008) | English | Cargo Compartment Fire Detection Instruments (Turbine Powered Subsonic Aircraft) |
| 111 | SAE AS420B-1962 | 1962-03-01(R 2008) | English | Flight Directors (Reciprocating Engine Powered Aircraft) |
| 112 | SAE AIR82-1962 | 1962-02-01 | English | TACHOMETER GENERATOR ENVELOPES |
| 113 | SAE AMS4218A-1962 | 1962-01-15 | English | ALUMINUM ALLOY CASTINGS, PREMIUM GRADE 7Si - 0.3Mg (A356) |
| 114 | SAE ARP717-1961 | 1961-12-15 | English | 400-CYCLE GENERATOR CHARACTERISTICS FOR CIVIL AIRCRAFT GROUND SUPPORT APPLICATIONS |
| 115 | SAE AIR77-1961 | 1961-12-15 | English | Spark Energy Measurements Using Oscilloscopic Methods - Inactive for New Design After May 01,1989 |
| 116 | SAE AIR801-1961 | 1961-12-01(R 1989) | English | Oscillographic Method for Measuring Spark Energy of Capacitor Discharge Ignition Systems |
| 117 | SAE ARP727-1961 | 1961-11-01(R 2008) | English | Rate Gyro Assembly Configuration |
| 118 | SAE ARP709-1961 | 1961-10-15 | English | TECHNICAL DATA REQUIREMENTS FOR SUPPORT EQUIPMENT |
| 119 | SAE AIR505-1961 | 1961-08-01(R 1991)(R 2003) | English | Oxygen Equipment, Provisioning and Use in High Altitude (to 40,000 ft.) Commercial Transport Aircraft |
| 120 | SAE J493-1961 | 1961-06-01 | English | Rod Ends and Clevis Pins |
| 121 | SAE AS418A-1961 | 1961-05-01(R 2008) | English | Maximum Allowable Airspeed Instruments (Reciprocating Engine Powered Aircraft) |
| 122 | SAE AS445-1961 | 1961-04-01(R 2008) | English | Fuel and Oil Quantity Instruments (Turbine Powered Subsonic Aircraft) |
| 123 | SAE AS130A-1961 | 1961-03-01(R 2013) | English | TUBE BENDING RADIUS |
| 124 | SAE AS130A-1961 | 1961-03-01(R 1991) | English | Tube Bending Radius |
| 125 | SAE ARP706-1961 | 1961-02-15 | English | SUPPORT EQUIPMENT ENGINEERING DATA SHEET |
| 126 | SAE AMS4218-1961 | 1961-01-15 | English | ALUMINUM ALLOY CASTINGS, PREMIUM GRADE 7Si - 0.3Mg (A356) |
| 127 | SAE ARP219-1961 | 1961-01-01(R 1992) | English | Conducting Test of Hydraulic Components in Contamination Controlled System, Procedure and Method for |
| 128 | SAE J481-1961 | 1961-01-01 | English | ROUND HEAD BOLTS |
| 129 | SAE J476A-1961 | 1961-01-01 | English | Dryseal Pipe Threads |
| 130 | SAE AS1020-1960 | 1960-10-01 | English | SCREW, UNION ADJUSTABLE FLARELESS |
| 131 | SAE AS509-1960 | 1960-08-01 | English | TERMINOLOGY GUIDE FOR AIRCRAFT GAS TURBINE ENGINES |
| 132 | SAE AS665A-1960 | 1960-07-15(R 2007) | English | TAPERED AXLE COLLAR DIMENSIONS - This document has been declared "Stabilized" by SAE |
| 133 | SAE AS665-1960 | 1960-07-15(R 2007) | English | Tapered Axle Collar Dimensions |
| 134 | SAE AS1013-1960 | 1960-07-01(R 2014) | English | FITTING END; ATTACHABLE, SWIVEL FEMALE 37° FLARED TUBE, FLEXIBLE METAL HOSE - STRAIGHT, 45° ELBOW AND 90° ELBOW STYLES |
| 135 | SAE AS1014-1960 | 1960-07-01(R 2014) | English | FITTING END; ATTACHABLE, SWIVEL FLANGE, FLEXIBLE METAL HOSE - STRAIGHT, 45° ELBOW AND 90° ELBOW STYLES |
| 136 | SAE AS1012-1960 | 1960-07-01(R 2014) | English | FITTING END; ATTACHABLE, SWIVEL FEMALE 37° MACHINED FLARE, FLEXIBLE METAL HOSE - STRAIGHT, 45° ELBOW AND 90° ELBOW STYLES |
| 137 | SAE AS1014-1960 | 1960-07-01(R 2007) | English | FITTING END; ATTACHABLE, SWIVEL FLANGE, FLEXIBLE METAL HOSE - STRAIGHT, 45 DEGREES ELBOW AND 90 DEGREES ELBOW STYLES |
| 138 | SAE AS1013-1960 | 1960-07-01(R 2007) | English | FITTING END; ATTACHABLE, SWIVEL FEMALE 37 DEGREES FLARED TUBE, FLEXIBLE METAL HOSE - STRAIGHT,45 DEGREES ELBOW AND 90 DEGREES ELBOW STYLES |
| 139 | SAE AS1012-1960 | 1960-07-01(R 2007) | English | FITTING END; ATTACHABLE, SWIVEL FEMALE 37 DEGREE MACHINED FLARE, FLEXIBLE METAL HOSE - STRAIGHT, 45 DEGREE ELBOW AND 90 DEGREE ELBOW STYLES |
| 140 | SAE AIR63-1960 | 1960-07-01 | English | O-RING SIZE & PART NUMBER CROSS-REFERENCE CHART |
| 141 | SAE J450-1960 | 1960-06-01(R 2002) | English | Use of Terms Yield Strength and Yield Point |
| 142 | SAE AIR84A-1960 | 1960-06-01(R 1992)(R 1994) | English | Ignition Peak Voltage Measurements |
| 143 | SAE J596-1960 | 1960-03-01 | English | ELECTRIC EMERGENCY LANTERNS |
| 144 | SAE AIR74-1960 | 1960-03-01 | English | CONSIDERATIONS ON LIMITING PRESSURE SURGE |
| 145 | SAE AIR12-1960 | 1960-01-01 | English | A METHOD OF GROUND RESONANCE TESTING FOR HELICOPTERS |
| 146 | SAE ARP591-1959 | 1959-11-15 | English | Conventional Representation |
| 147 | SAE J250-1959 | 1959-05-01 | English | Synthetic Resin Plastic Sealers, Nondrying Type |
| 148 | SAE ARP265A-1959 | 1959-02-01(R 1991) | English | Airfoil Shapes- Dimensioning of Turbine Engine |
| 149 | SAE J503-1959 | 1959-01-01 | English | Woodruff Key Slots and Keyways |
| 150 | SAE AIR65-1958 | 1958-08-01(R 2013) | English | Thermoelectric Circuits and the Performance of Several Aircraft Engine Thermocouples |
| 151 | SAE AIR65-1958 | 1958-08-01 | English | Thermoelectric Circuits and the Performance of Several Aircraft Engine Thermocouples |
| 152 | SAE ARP551A-1958 | 1958-07-15 | English | ACCESSORY ENVELOPE FOR 8" NOMINAL DIAMETER GENERATORS |
| 153 | SAE ARP550A-1958 | 1958-07-15 | English | Accessory Envelope type XII for 6 1/2" Nominal Diameter Generation |
| 154 | SAE ARP553A-1958 | 1958-07-15 | English | Accessory Envelope Type XVI for 11" Nominal Diameter Generators AC or DC Above 60 KVA (Type I & II) |
| 155 | SAE ARP552A-1958 | 1958-07-15 | English | Accessory Envelope Type XVI for 11" Nominal Diameter Generators AC or DC 15 to 60 KVA (Type I & II) |
| 156 | SAE ARP502-1958 | 1958-07-01(R 2012) | English | PROPELLER SHAFT ENDS – FLANGED SMALL AIRCRAFT ENGINE |
| 157 | SAE AS403A-1958 | 1958-07-01(R 2008) | English | STALL WARNING INSTRUMENT |
| 158 | SAE AS396B-1958 | 1958-07-01(R 2008) | English | Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro) |
| 159 | SAE AS397A-1958 | 1958-07-01(R 2008) | English | Direction Instrument, Non-Magnetic, Stabilized Type (Directional Gyro) |
| 160 | SAE AS399A-1958 | 1958-07-01(R 2008) | English | Direction Instrument, Magnetic, (Stabilized Type) |
| 161 | SAE AS394A-1958 | 1958-07-01(R 2008) | English | Rate of Climb Indicator, Pressure Actuated (Vertical Speed Indicator) |
| 162 | SAE ARP502-1958 | 1958-07-01(R 2006) | English | Propeller Shaft Ends - Flanged Small Aircraft Engine |
| 163 | SAE AIR61-1958 | 1958-07-01 | English | HOT GAS TURBINE STARTER COMPOSITE OUTLINE DRAWINGS |
| 164 | SAE J604-1958 | 1958-05-01(R 1995) | English | Engine Terminology and Nomenclature - General |
| 165 | SAE HS-82-1958 | 1958-05-01 | English | Truck Ability Prediction Procedure Plus Examples and Copies of Forms |
| 166 | SAE ARP464-1958 | 1958-02-15(R 2013) | English | Mount - Thermocouple |
| 167 | SAE ARP464-1958 | 1958-02-01 | English | Mount - Thermocouple |
| 168 | SAE AIR65-1958 | 1958-01-01(R 1992) | English | Thermoelectric Circuits and the Performance of Several Aircraft Engine Thermocouples |
| 169 | SAE ARP464-1958 | 1958-01-01(R 1991) | English | Mount-Thermocouple |
| 170 | SAE ARP424-1957 | 1957-11-15 | English | SPARK IGNITER OUTLINE/THREADED MOUNTING |
| 171 | SAE AS41E-1957 | 1957-11-01 | English | Propeller Shaft Ends - Single Rotation - Reaffirmed Noncurrent May 2006 |
| 172 | SAE J748-1957 | 1957-10-01(R 2008) | English | HYDRAULIC DIRECTIONAL CONTROL VALVES, 3000 PSI MAXIMUM |
| 173 | SAE ARP572-1957 | 1957-08-15(R 1992) | English | Elbow Assembly- Shielded Spark Plug- .750-20 Thread |
| 174 | SAE AIR45A-1957 | 1957-08-01 | English | PUMPS, HYDRAULIC POWER DRIVEN, VARIABLE DELIVERY COMPOSITE OUTLINE DRAWINGS |
| 175 | SAE AMS4047B-1957 | 1957-01-15 | English | ALUMINUM ALLOY SHEET AND PLATE, ALUMINUM ALLOY CLAD, ROLL TAPERED 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (Alc 7075-T6) |
| 176 | SAE J445-1957 | 1957-01-01(R 2013) | English | Metallic Shot and Grit Mechanical Testing |
| 177 | SAE AMS7223-1957 | 1957-01-01(R 1992) | English | Rivets, Aluminum Alloy 4.5Cu - 1.5Mg - 0.6Mn (2024-T4) ) |
| 178 | SAE AIR60-1956 | 1956-12-01 | English | VARIOUS TYPES OF AIRCRAFT ELECTRIC WIRE |
| 179 | SAE AIR47-1956 | 1956-12-01 | English | FRETTING |
| 180 | SAE ARP467-1956 | 1956-03-15 | English | EQUIPMENT FRAGILITY DATA |
| 181 | SAE AIR37-1956 | 1956-03-01 | English | AIR TURBINE STARTER COMPOSITE OUTLINE DRAWINGS |
| 182 | SAE AMS7294-1956 | 1956-01-01(R 1992) | English | Labels, Aluminum Foil Etched and Enameled ) |
| 183 | SAE AIR42-1955 | 1955-03-01(R 1991) | English | Contamination Studies of Aircraft Greases |
| 184 | SAE AIR39-1955 | 1955-03-01(R 1991) | English | Water Compatibility of Aircraft Greases |
| 185 | SAE AIR40-1955 | 1955-03-01(R 1991) | English | Corrosion Preventive Characteristics of Aircraft Greases |
| 186 | SAE AIR41-1955 | 1955-03-01(R 1991) | English | Stability of Aircraft Greases |
| 187 | SAE AIR44-1955 | 1955-03-01(R 1991) | English | Load Support Characteristics of Aircraft Greases |
| 188 | SAE AIR43-1955 | 1955-01-01(R 1991) | English | Low Temperature Torque Test for Aircraft Greases |
| 189 | SAE ARP259-1954 | 1954-12-15 | English | SHAFTS - POWER TRANSMISSION |
| 190 | SAE ARP458-1954 | 1954-12-15 | English | UNIVERSAL MAINTENANCE AND OVERHAUL STAND FOR TURBO-JET (10,000 LBS. THRUST CLASS) AND TURBO-PROP ENGINES |
| 191 | SAE AS91C-1954 | 1954-12-01 | English | Propeller Shaft Ends, Dual Rotation (Propeller Supplied Bearing) - Reaffirmed Noncurrent May 2006 |
| 192 | SAE AS131A-1954 | 1954-06-01(R 2006) | English | Pads, Oil Inlet and Outlet, Types I, II & III-for Airplane Connections for Aircraft Engines |
| 193 | SAE AS56C-1954 | 1954-06-01(R 2006) | English | Lever Ends-Fuel and Power Control |
| 194 | SAE AS293-1954 | 1954-06-01(R 1994) | English | Spark Plug-Spring Contact for High Voltage |
| 195 | SAE ARP295-1954 | 1954-06-01 | English | Terminal Well, Low Voltage Igniter Plug - Reaffirmed Noncurrent December 1992 |
| 196 | SAE AIR33A-1954 | 1954-06-01 | English | AIR CONDITIONING OF AIRCRAFT AT HIGH ALTITUDE |
| 197 | SAE ARP294-1954 | 1954-06-01 | English | Terminal, Lead, Low Voltage Igniter Plug - Reaffirmed Noncurrent October 1995 |
| 198 | SAE J727-1954 | 1954-01-01(R 1986) | English | Nomenclature - Crawler Tractor |
| 199 | SAE AS299-1954 | 1954-01-01 | English | Spark Plugs, Aircraft Engine-18mm Short Reach Shielded (Cancelled August 1996) |
| 200 | SAE AS273-1953 | 1953-10-15 | English | POSITION LIGHT FLASHERS: SINGLE-CIRCUIT |
| 201 | SAE AIR36-1953 | 1953-10-01 | English | SPIRAL FAILURE - "O" RING SEALS - LANDING GEAR SHOCK STRUTS |
| 202 | SAE AS93D-1953 | 1953-01-01(R 2006) | English | Cones, Rear, Propeller Hub |
| 203 | SAE AMS4756-1953 | 1953-01-01(R 1992) | English | Solder 97.5Pb - 1.5Ag - 1Sn
DoD Adopted |
| 204 | SAE J488-1953 | 1953-01-01 | English | PLAIN WASHERS |
| 205 | SAE AS93D-1953 | 1953-01-01 | English | Cones, Rear, Propeller Hub - Reaffirmed Noncurrent November 2001 |
| 206 | SAE ARP86B-1952 | 1952-02-01(R 2007) | English | Heater, Airplane, Engine Exhaust Gas to Air Heat Exchanger Type |
| 207 | SAE AMS4145F-1952 | 1952-01-01(R 1995) | English | Aluminum Alloy Forgings 12.2Si - 1.1Mg - 0.9Cu - 0.9Ni (32S-T6) ) |
| 208 | SAE AMS4755A-1952 | 1952-01-01(R 1992) | English | Solder, Lead-Silver 94Pb - 5.5Ag
DoD Adopted |
| 209 | SAE AIR13A-1951 | 1951-10-01(R 1991) | English | Final Report on Cold Starting of Reciprocating Aircraft Engines |
| 210 | SAE AS100016 THRU AS100025-1951 | 1951-08-01(R 2007) | English | Lockwire, Brass |
| 211 | SAE AMS6263C-1951 | 1951-06-01 | English | STEEL 3.25Ni - 1.2Cr - 0.1Mo (0.11-0.17C) (SAE 9315) |
| 212 | SAE AIR23-1951 | 1951-01-01 | English | AIRPLANE HEATING AND VENTILATING EQUIPMENT ENGINEERING DATA FLUID DYNAMICS |
| 213 | SAE AS92B-1949 | 1949-10-01(R 2006) | English | Cones, Front, Propeller Hub |
| 214 | SAE ARP179A-1949 | 1949-05-01(R 1991) | English | Involute Spline Gages (30 Degree Pressure Angle) |
| 215 | SAE AS360-1949 | 1949-02-01 | English | SNAP RING - PROPELLER HUB TAPER TYPE - NUMBER O |
| 216 | SAE AS357-1949 | 1949-02-01 | English | HUB - WOOD PROPELLER - TAPER TYPE NUMBER 0 |
| 217 | SAE AS359-1949 | 1949-02-01 | English | NUT - PROPELLER HUB TAPER TYPE - NUMBER O |
| 218 | SAE J712-1949 | 1949-01-01(R 1999) | English | Industrial and Agricultural Disc Wheels
DoD Adopted |
| 219 | SAE AS211-1948 | 1948-11-01 | English | FLASHER, POSITION LIGHT |
| 220 | SAE AS196-1948 | 1948-03-01(R 2008) | English | Thermo-Sensitive Element (Iron - Constantan) |
| 221 | SAE AS234-1948 | 1948-03-01(R 2008) | English | THERMO-SENSITIVE ELEMENT (RESISTANCE BULB TYPE) |
| 222 | SAE AS236-1948 | 1948-03-01(R 2008) | English | ADAPTER, THERMO-SENSITIVE ELEMENT |
| 223 | SAE AS199-1948 | 1948-03-01 | English | WHEEL AND AXLE DIMENSIONS, LOW PRESSURE - STRAIGHT AXLE TYPE |
| 224 | SAE AS214-1948 | 1948-03-01 | English | GENERATORS - 12 VOLT |
| 225 | SAE ARP175-1948 | 1948-01-01(R 2008) | English | Temperature Measurement, Well Insert Type |
| 226 | SAE AIR17-1948 | 1948-01-01 | English | STRUCTURAL CHARACTERISTICS OF AIRCRAFT TUBING |
| 227 | SAE J501-1948 | 1948-01-01 | English | Shaft Ends |
| 228 | SAE AS351A-1947 | 1947-08-01(R 2005) | English | Wrench - Propeller Shaft (Shaft Sizes No. 40-50-60) |
| 229 | SAE AS352A-1947 | 1947-08-01(R 2005) | English | Wrench - Propeller Shaft (Shaft Sizes No. 10-20-30) |
| 230 | SAE AS354A-1947 | 1947-08-01(R 2005) | English | Pin - Propeller Shaft Wrench |
| 231 | SAE AS395-1947 | 1947-07-01 | English | TURN AND BANK INDICATOR |
| 232 | SAE ARP388-1947 | 1947-02-01 | English | UNIVERSAL JOINTS - DESIGN CRITERIA FOR |
| 233 | SAE AS307-1946 | 1946-01-01(R 2012) | English | COVER, FLIGHT - GOVERNOR MOUNTING PAD |
| 234 | SAE AS307-1946 | 1946-01-01(R 2006) | English | Cover, Flight - Governor Mounting Pad |
| 235 | SAE AS353-1946 | 1946-01-01(R 2005) | English | Handle - Propeller Shaft Wrench |
| 236 | SAE AS361-1946 | 1946-01-01 | English | WEAR GAGE |
| 237 | SAE AS356-1946 | 1946-01-01 | English | PULLER - IMPACT - UNIVERSAL |
| 238 | SAE AIR6-1945 | 1945-11-01(R 1995) | English | Oil Dilution and Cold Starting of Aircraft Engines |
| 239 | SAE AMS4076B-1945 | 1945-11-01 | English | ALUMINUM ALLOY TUBING (SEAMLESS) Magnesium Silicon Chromium (53S-W) |
| 240 | SAE AS180A-1945 | 1945-09-01(R 2012) | English | PROPELLER HUB-SINGLE ROTATION |
| 241 | SAE AS180A-1945 | 1945-09-01(R 2006) | English | Propeller Hub-Single Rotation |
| 242 | SAE AMS4500A-1945 | 1945-08-01 | English | COPPER SHEET AND STRIP |
| 243 | SAE AMS4500A-1945 | 1945-08-01 | English | COPPER SHEET AND STRIP |
| 244 | SAE AS167A-1945 | 1945-07-01(R 2012) | English | Chart – Humidity Indicator, Color Comparison |
| 245 | SAE AS167A-1945 | 1945-07-01(R 2006) | English | Chart - Humidity Indicator, Color Comparison |
| 246 | SAE AMS3223B-1945 | 1945-07-01 | English | SYNTHETIC RUBBER Hot Oil Resistant - High Swell (55-65) |
| 247 | SAE AMS6315B-1945 | 1945-07-01 | English | STEEL 1.8 Ni - .25 Mo (.38 - .43c) Heat Treated (105,000 TS) |
| 248 | SAE AMS6254D-1945 | 1945-05-01 | English | STEEL - CARBURIZING 3.5 Ni 1.5 Cr (.14 - .20 C) |
| 249 | SAE AS340-1945 | 1945-02-01(R 2004) | English | COVER 鈥?SHIPPING CONTAINER INSPECTION PORT |
| 250 | SAE AS338-1945 | 1945-02-01(R 1991) | English | Shipping Containers- Aircraft Engines and Components |
| 251 | SAE AS178-1945 | 1945-02-01(R 1991) | English | Two-Speed Propeller Reduction Gear Control |
| 252 | SAE AS161-1944 | 1944-09-01(R 2005) | English | Lifting Eye - Propeller Shaft |
| 253 | SAE AMS6253D-1944 | 1944-05-01 | English | STEEL - CARBURIZING Nickel Chromium |
| 254 | SAE AMS6263A-1944 | 1944-05-01 | English | STEEL 3 Ni 1 Cr .1 Mo (.09 - .14 C) |
| 255 | SAE AS55A-1944 | 1944-02-01(R 2006) | English | Tachometer, Mounting Pad and Drive - Type II |
| 256 | SAE AS47A-1944 | 1944-01-01(R 2004) | English | Pump, Fuel, Mounting Pad and Drive |
| 257 | SAE AS132-1943 | 1943-11-01 | English | PIN - TAPER |
| 258 | SAE AS135-1943 | 1943-03-01 | English | SCREW HEADS, FLAT FILLISTER - LARGE FILLET AIRCRAFT ENGINE |
| 259 | SAE AS134-1943 | 1943-03-01 | English | BOLT HEADS, HEXAGON - LARGE FILLET AIRCRAFT ENGINE |
| 260 | SAE AIR3-1943 | 1943-01-01(R 1991) | English | Survey of Operating Practices with Propeller Ice Elimination Equipment |
| 261 | SAE AMS7212-1942 | 1942-12-01 | English | STEEL COTTER PINS, GALVANIZED Low Carbon |
| 262 | SAE AMS3211-1942 | 1942-12-01 | English | RUBBER OR SYNTHETIC RUBBER COMPOUNDS Coolant Resistant (55-65) |
| 263 | SAE AMS6263-1942 | 1942-09-01 | English | STEEL 2 Ni .9 Cr .35 Mo (.11 - .16 C) |
| 264 | SAE AMS6262-1942 | 1942-09-01 | English | STEEL 2 Ni .9 Cr .35 Mo (.08-.13 C) |
| 265 | SAE ARP60A-1942 | 1942-03-01 | English | CARBURETOR ENVELOPE, AIRCRAFT - SIZE 100 |
| 266 | SAE AMS6240B-1942 | 1942-03-01 | English | STEEL - CARBURIZING 5% Nickel |
| 267 | SAE AMS6252B-1942 | 1942-03-01 | English | STEEL - CARBURIZING Nickel Chromium - (Heavy Section) |
| 268 | SAE AMS3392-1942 | 1942-03-01 | English | Ignition Cable, High Tension Copper Conductor |
| 269 | SAE AS106-1942 | 1942-01-07 | English | RIVNUT, DE-ICER ATTACHMENT (KEYED) |
| 270 | SAE AS29-1942 | 1942-01-01(R 1991) | English | Ignition Shielding, Aircraft |
| 271 | SAE AS54-1941 | 1941-11-01(R 2012) | English | TACHOMETER DRIVE – TYPE I |
| 272 | SAE AS54-1941 | 1941-11-01(R 2006) | English | TACHOMETER DRIVE - TYPE I |
| 273 | SAE AS13-1941 | 1941-11-01(R 2006) | English | Magnetos, Aircraft, Drives for |
| 274 | SAE AS21-1941 | 1941-11-01(R 1991) | English | Symbols and Sketches for Pressures and Temperatures in Induction System - Aircraft Engine |
| 275 | SAE AS14-1941 | 1941-01-01(R 1991) | English | Magnetos, Aircraft, Installation of - (Inactive for New Design After October 01, 1982) |
| 276 | SAE AS31-1941 | 1941-01-01 | English | SCREW HEADS, FLAT FILLISTER - AIRCRAFT ENGINE |
| 277 | SAE AMS3230-1940 | 1940-10-15 | English | GASKET, OIL RESISTING |
| 278 | SAE J566-1936 | 1936-06-01(R 1960) | English | HEADLAMP MOUNTINGS |
| 279 | SAE J413-1932 | 1932-01-01(R 2011) | English | Mechanical Properties of Heat Treated Wrought Steels |
| 280 | SAE J413-1932 | 1932-01-01(R 2002) | English | Mechanical Properties of Heat Treated Wrought Steels |
| 281 | SAE AMS4344D-12-0 | 12-01-2011 | English | Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged - UNS A97175 |
| 282 | SAE J1177-12-0 | 12-01-2006(R 2012) | English | Hydraulic Excavator Operator Controls
DoD Adopted |
| 283 | SAE AMS4343D-12-0 | 12-01-2004(R 2012) | English | Aluminum Alloy, Extrusions 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged - UNS A97149
DoD Adopted |
| 284 | SAE AMS4633A-12-0 | 12-01-2003(R 2012) | English | Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50) - UNS C64200 |
| 285 | SAE AMS4614H-12-0 | 12-01-2003(R 2012) | English | Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10) - UNS C37700 |
| 286 | SAE AMS4820E-12-0 | 12-01-2003(R 2012) | English | Bearings, Leaded Copper 70Cu - 28.5Pb Steel Back - UNS C98400
DoD Adopted |
| 287 | SAE AMS4602D-12-0 | 12-01-2003(R 2012) | English | Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (HO4) - UNS C10200 |
| 288 | SAE MAP1572A-12-0 | 12-01-2002(R 2012) | English | Metric Stud Holes For Aerospace Electrical and Electronic Wire Terminating Devices |
| 289 | SAE AMS5584A-12-0 | 12-01-2000(R 2012) | English | Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 17Cr - 12Ni - 1.5Mo - 0.03C max Cold Drawn, 1/8 Hard Temper - UNS S31603
DoD Adopted |
| 290 | SAE AMS4300C-10-0 | 10-01-2006(R 2012) | English | Boron-Aluminum Composite Sheet 50 v/o 5.6B, 6061-0, For Diffusion Bonding
DoD Adopted |
| 291 | SAE AMS4800E-10-0 | 10-01-2006(R 2012) | English | Bearings, Babbitt 91Sn - 4.5Sb - 4.5Cu - UNS L13910
DoD Adopted |
| 292 | SAE AMS7445D-10-0 | 10-01-2001(R 2012) | English | Balls, Steel, Corrosion-Resistant 17Cr Annealed - UNS S44002, S44003, S44004
DoD Adopted |
| 293 | SAE J1257-10-0 | 10-01-1980(R 2012) | English | Rating Chart for Cantilevered Boom Cranes |
| 294 | SAE AMS5703D-09-0 | 09-01-2006(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated - UNS N09706
|
| 295 | SAE AMS5382J-09-0 | 09-01-2006(R 2012) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W As-Cast - UNS R30031
DoD Adopted |
| 296 | SAE AMS4893C-09-0 | 09-01-2006(R 2012) | English | Alloy Castings, Corrosion and Heat-Resistant 66Ni - 29Cu - 4.0Si Solution Treated - UNS N04019 |
| 297 | SAE AMS4892C-09-0 | 09-01-2006(R 2012) | English | Alloy Castings, Corrosion and Heat-Resistant 66Ni - 29Cu - 4.0Si As Cast - UNS N04019
DoD Adopted |
| 298 | SAE AMS5712J-09-0 | 09-01-2006(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipitation Hardenable - UNS N07041
DoD Adopted |
| 299 | SAE AMS4674G-09-0 | 09-01-2006(R 2012) | English | Nickel - Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu - 0.04S Free Machining - UNS N04405 |
| 300 | SAE AMS7510/1B-09-0 | 09-01-2006(R 2012) | English | Magnets, Rare-Earth/Cobalt, Permanent Samarium-Cobalt, 33/67 - 15 (119) 250 |
| 301 | SAE AMS7510/2B-09-0 | 09-01-2006(R 2012) | English | Magnets, Rare-Earth/Cobalt, Permanent Samarium-Cobalt, 33/67 - 18 (143) 250 |
| 302 | SAE AMS7510B-09-0 | 09-01-2006(R 2012) | English | Magnets, Rare-Earth/Cobalt, Permanent Powder-Metallurgy Product |
| 303 | SAE AMS4779G-09-0 | 09-01-2005(R 2012) | English | Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 to 1950 °F (982 to 1066 °C) Solidus-Liquidus Range - UNS N99640
DoD Adopted |
| 304 | SAE AMS4782F-09-0 | 09-01-2005(R 2012) | English | Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 to 2075 °F (1080 to 1135 °C) Solidus-Liquidus Range - UNS N99650
DoD Adopted |
| 305 | SAE AMS-DTL-22499-09-0 | 09-01-1998(R 2012) | English | Shim Stock, Laminated
DoD Adopted |
| 306 | SAE AMS-DTL-22499/3-09-0 | 09-01-1998(R 2012) | English | SHIM STOCK, LAMINATED, CRES
DoD Adopted |
| 307 | SAE J787B-09-0 | 09-01-1966 | English | Motor Vehicle Seat Belt Anchorage |
| 308 | SAE AMS5747D-08-0 | 08-01-2006(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable - UNS N07750 |
| 309 | SAE AMS5746F-08-0 | 08-01-2005(R 2012) | English | Alloy, Corrosion and Heat-Resistant, Bars and Forgings 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al - 31Fe (D979) Consumable Electrode Vacuum Melted Solution and Precipitation Heat Treated - UNS N09979
DoD Adopted |
| 310 | SAE AMS4305-08-0 | 08-01-2005(R 2012) | English | Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged - UNS A97449 |
| 311 | SAE AMS5670F-08-0 | 08-01-2005(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation-Hardenable - UNS N07750 |
| 312 | SAE AMS-QQ-A-200B-08-0 | 08-01-2004(R 2012) | English | Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for
DoD Adopted |
| 313 | SAE AMS-QQ-A-250A-08-0 | 08-01-2004(R 2012) | English | Aluminum and Aluminum Alloy, Plate and Sheet General Specification for
DoD Adopted |
| 314 | SAE AS17143-08-0 | 08-01-1997(R 2012) | English | TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 315 | SAE AMS4511A-07-0 | 07-01-2004(R 2012) | English | Copper-Beryllium Alloy Castings 97Cu - 2.1Be - 0.52(Co + Ni) - 0.28Si Solution and Precipitation Heat Treated (TFOO) - UNS C82500
DoD Adopted |
| 316 | SAE AS81714/26-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, MODULES, ELECTRONIC, FEEDBACK TYPE, SIZE 20-2, SERIES I
DoD Adopted |
| 317 | SAE AS81714/31-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, MODULES, FEEDBACK TYPE, SIZES 20-6, 20-7, 20-8 HORIZONTAL MOUNTING WITH INTEGRAL BRACKET, SERIES I
DoD Adopted |
| 318 | SAE AS81714/30-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, MODULES, ELECTRONIC, FEEDBACK TYPE, SIZES 20-3, 20-4, 20-5 VERTICAL MOUNTING WITH INTEGRAL BRACKET, BLOCK MOUNTING, SERIES I
DoD Adopted |
| 319 | SAE AS81714/29-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, BRACKET, BLOCK MOUNTING, SERIES I
DoD Adopted |
| 320 | SAE AS81714/28-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, GROUNDING MODULES, INTEGRAL BRACKET MOUNTING, SERIES I
DoD Adopted |
| 321 | SAE AS81714/16-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDBACK TYPE, LIGHT WEIGHT, SERIES I
DoD Adopted |
| 322 | SAE AS81714/17-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 22D, SERIES I
DoD Adopted |
| 323 | SAE AS81714/18-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, MODULES, ELECTRONIC, FEEDBACK TYPE, SIZE 20, SERIES I
DoD Adopted |
| 324 | SAE AS81714/19-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, MODULES, ELECTRONIC, FEEDBACK TYPE, SIZE 16, SERIES I
DoD Adopted |
| 325 | SAE AS81714/20-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, MODULES, ELECTRONIC, FEEDBACK TYPE, SIZE 12, SERIES I
DoD Adopted |
| 326 | SAE AS81714/21-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTIONS, INTEGRAL DIODE, SERIES I
DoD Adopted |
| 327 | SAE AS81714/22-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTION, INTEGRAL RESISTOR, SERIES I
DoD Adopted |
| 328 | SAE AS81714/24-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, ELECTRONIC, IN-LINE JUNCTIONS, DOUBLE, INTEGRAL DIODE(S), SERIES I
DoD Adopted |
| 329 | SAE AS81714/25-07-0 | 07-01-2001(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, MODULES, ELECTRONIC, FEEDBACK TYPE, SIZE 20-1, SERIES I
DoD Adopted |
| 330 | SAE AS18121-07-0 | 07-01-1999(R 2012) | English | FERRULES, OUTER, INSULATED, SHIELD TERMINATING,TYPE II TWO-PIECE, CLASS I, FOR SHIELDED CABLE
DoD Adopted |
| 331 | SAE AS81824/1-07-0 | 07-01-1998(R 2012) | English | SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1
DoD Adopted |
| 332 | SAE AS81714/9-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDTHRU TYPE, SIZE 12, SERIES I
DoD Adopted |
| 333 | SAE AS81714/7-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDTHRU TYPE, SIZE 20 SERIES I
DoD Adopted |
| 334 | SAE AS81714/8-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDTHRU TYPE, SIZE 16, SERIES I
DoD Adopted |
| 335 | SAE AS81714/11-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES I
DoD Adopted |
| 336 | SAE AS81714/2-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 20 SERIES I
DoD Adopted |
| 337 | SAE AS81714/3-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 16, SERIES I
DoD Adopted |
| 338 | SAE AS81714/4-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 12, SERIES I
DoD Adopted |
| 339 | SAE AS81714/5-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK FEEDBACK TYPE, SERIES I
DoD Adopted |
| 340 | SAE AS81714/6-07-0 | 07-01-1998(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDTHRU TYPE, SIZE 22, SERIES I
DoD Adopted |
| 341 | SAE AMS3683A-07-0 | 07-01-1993(R 2012) | English | Tubing, Irradiated Modified Fluoropolymer Plastic, Electrical Insulation Flame Resistant, Flexible, Heat-Shrinkable, 2 to 1 Shrink Ratio |
| 342 | SAE AMS3582A-07-0 | 07-01-1979(R 2012) | English | Plastic Tubing, Electrical Insulation Crosslinked Polyvinyl Chloride, Flexible Heat Shrinkable 2 to 1 Shrink Ratio |
| 343 | SAE AMS5897B-06-0 | 06-01-2006(R 2012) | English | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (Nb) (SAE 30347) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper - UNS S34700
DoD Adopted |
| 344 | SAE AMS5610N-06-0 | 06-01-2006(R 2012) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 12.5Cr - Low Carbon (SAE 51416, 51416Se) Free-Machining - UNS S41600 and UNS S41623
DoD Adopted |
| 345 | SAE AMS5503E-06-0 | 06-01-2006(R 2012) | English | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr (SAE 51430) Annealed - UNS S43000
DoD Adopted |
| 346 | SAE AS85731/2-06-0 | 06-01-2004(R 2012) | English | FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING, FORCE LIMITING |
| 347 | SAE AS34801-06-0 | 06-01-2004(R 2012) | English | TOOL, CONNECTOR ASSEMBLY; FOR MIL-C-5015 CONNECTORS
DoD Adopted |
| 348 | SAE AMS5221E-06-0 | 06-01-2001(R 2012) | English | Iron-Nickel Alloy Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated - UNS N09902
DoD Adopted |
| 349 | SAE AMS1550B-06-0 | 06-01-1995(R 2012) | English | Cleaner, Water Base, Aircraft interior Hard Surface Materials |
| 350 | SAE AMS5617J-05-2 | 05-20-2006(R 2012) | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S45500
DoD Adopted |
| 351 | SAE AMS2263E-05-0 | 05-01-2006(R 2012) | English | Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Tubing |
| 352 | SAE AMS5893B-05-0 | 05-01-2006(R 2012) | English | Iron-Nickel Alloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8 (Cb + Ta)(Nb + Ta) - 1.6Ti Solution Heat Treated, Short-Time Precipitation Hardenable Multiple Melted, High Temperature, Low Expansion - UNS N19909 |
| 353 | SAE AMS2269F-05-0 | 05-01-2006(R 2012) | English | Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys
DoD Adopted |
| 354 | SAE AMS5796E-05-0 | 05-01-2006(R 2012) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 10Ni - 15W - UNS R30605
DoD Adopted |
| 355 | SAE AMS5868B-05-0 | 05-01-2006(R 2012) | English | Steel, Corrosion-Resistant, Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1/2 Hard Temper - UNS S30400 |
| 356 | SAE AS23190/1-05-0 | 05-01-1999(R 2012) | English | STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, NYLON, ADJUSTABLE, WIRE SUPPORT, TYPE III, CLASS 1
DoD Adopted |
| 357 | SAE AMS4870F-04-0 | 04-01-2004(R 2012) | English | Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As Cast - UNS C95420 |
| 358 | SAE AS81714/60-04-0 | 04-01-2004(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SERIES II
DoD Adopted |
| 359 | SAE AS81714/61-04-0 | 04-01-2004(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SERIES II
DoD Adopted |
| 360 | SAE AS81714/65-04-0 | 04-01-2004(R 2012) | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES II
DoD Adopted |
| 361 | SAE AS81714/69-04-0 | 04-01-2004(R 2012) | English | TERMINAL JUNCTION SYSTEM, BLOCK REMOVAL TOOLS, SERIES II
DoD Adopted |
| 362 | SAE AS81824/4-04-0 | 04-01-2004(R 2012) | English | SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, SPLICE, SHIELD, SOLDER TYPE, INSULATED, CLASS 1
DoD Adopted |
| 363 | SAE AS81824/5-04-0 | 04-01-2004(R 2012) | English | SPLICES, ELECTRIC, PERMANENT, CRIMP STYLE, COPPER, INSULATED, ENVIRONMENT RESISTANT, KIT,SHIELDED CABLE, CLASS 1
DoD Adopted |
| 364 | SAE AMS4842E-04-0 | 04-01-2004(R 2012) | English | Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As Cast - UNS C93700
DoD Adopted |
| 365 | SAE AMS4827E-04-0 | 04-01-2004(R 2012) | English | Bearings, Leaded Bronze 80Cu - 10Pb - 10Sn Steel Back
DoD Adopted |
| 366 | SAE AMS4712F-04-0 | 04-01-2004(R 2012) | English | Copper Alloy, Wire 65Cu - 35Zn Annealed (061) - UNS C27000 |
| 367 | SAE AMS4616F-04-0 | 04-01-2004(R 2012) | English | Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved - UNS C65620
DoD Adopted |
| 368 | SAE AMS4612J-04-0 | 04-01-2004(R 2012) | English | Brass, Naval, Bars and Rods 60.5Cu - 38.5Zn - 0.75Sn Hard Temper (H04) - UNS C46400 |
| 369 | SAE AMS4558G-04-0 | 04-01-2004(R 2012) | English | Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58) - UNS C33200 |
| 370 | SAE AMS4553C-04-0 | 04-01-2004(R 2012) | English | Brass, Seamless, Tubing 85Cu - 15Zn Annealed (061) - UNS C23000 |
| 371 | SAE AS81824/3-04-0 | 04-01-1998(R 2012) | English | SPLICE, COAXIAL CABLE, ELECTRIC, PERMANENT, CRIMP STYLE COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1
DoD Adopted |
| 372 | SAE AMS3579D-04-0 | 04-01-1996(R 2012) | English | Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio |
| 373 | SAE AMS4296B-03-0 | 03-01-2007(R 2012) | English | Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked - UNS A82524 |
| 374 | SAE AS85848-03-0 | 03-01-2002(R 2012) | English | Sleeving, for Identification Marking, Heat Shrinkable, General Specification for
DoD Adopted |
| 375 | SAE AS81714/15-03-0 | 03-01-2000(R 2012) | English | TERMINAL JUNCTION SYSTEM, GROUNDED STUD, SERIES I
DoD Adopted |
| 376 | SAE AS81714/10-03-0 | 03-01-2000(R 2012) | English | TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDTHRU TYPE, SERIES I
DoD Adopted |
| 377 | SAE AS81714/14-03-0 | 03-01-2000(R 2012) | English | TERMINAL JUNCTION SYSTEM, RACK ASSEMBLY, TRACK, FEEDTHRU TYPE, LIGHT WEIGHT, SERIES I
DoD Adopted |
| 378 | SAE J220-03-0 | 03-01-1991(R 2012) | English | Crane Boomstop |
| 379 | SAE AS21232A-02-0 | 02-01-2012 | English | BEARING, PLAIN, SELF-ALIGNING, GROOVE OUTER RING, PTFE LINED, NARROW
DoD Adopted |
| 380 | SAE AS39029/64A-02-0 | 02-01-2012 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-24308 CONNECTORS)
DoD Adopted |
| 381 | SAE AS9217C-02-0 | 02-01-2012 | English | BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .190-32 UNJF-3A - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 382 | SAE AMS4229F-02-0 | 02-01-2012 | English | Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged - UNS A02010
DoD Adopted |
| 383 | SAE AMS4185E-02-0 | 02-01-2012 | English | Filler Metal, Aluminum Brazing 12Si (4047) - UNS A94047
DoD Adopted |
| 384 | SAE AMS4163E-02-0 | 02-01-2012 | English | Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened - UNS A92219
DoD Adopted |
| 385 | SAE AMS3792/3B-02-0 | 02-01-2012 | English | Tape, Low Modulus Aramid 2 (51), 3000 (13,345) Breaking Strength - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 386 | SAE AMS3792/2B-02-0 | 02-01-2012 | English | Tape, Low Modulus Aramid 2 (51), 1000 (4448) Breaking Strength - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 387 | SAE AMS3792/1B-02-0 | 02-01-2012 | English | Tape, Low Modulus Aramid 2 (51), 300 (1334) Breaking Strength - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 388 | SAE AMS3791B-02-0 | 02-01-2012 | English | Cloth, Marquisette, Nylon - This document has been declared "Stabilized" by SAE |
| 389 | SAE AMS3782B-02-0 | 02-01-2012 | English | Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus - This document has been declared "Stabilized" by SAE |
| 390 | SAE AMS3778B-02-0 | 02-01-2012 | English | Tape and Webbing, Woven, Nylon - This document has been declared "Stabilized" by SAE |
| 391 | SAE AMS3778/5B-02-0 | 02-01-2012 | English | Webbing, Woven, Nylon 900 Pounds Force (4003 N) - This document has been declared "Stabilized" by SAE |
| 392 | SAE AMS3778/4B-02-0 | 02-01-2012 | English | Webbing, Woven, Nylon 2600 Pounds Force (11,565 N) - This document has been declared "Stabilized" by SAE |
| 393 | SAE AMS3778/1B-02-0 | 02-01-2012 | English | Tape, Woven, Nylon 350 Pounds Force (1557 N) - This document has been declared "Stabilized" by SAE |
| 394 | SAE AMS3725B-02-0 | 02-01-2012 | English | Core, Polyurethane Foam (Polyether) Rigid, Cellular - This document has been declared "Stabilized" by SAE |
| 395 | SAE AMS3669G-02-0 | 02-01-2012 | English | Polytetrafluoroethylene (PTFE) Sheet, Molded Premium Grade, As Sintered - This document has been declared "Stabilized" by SAE |
| 396 | SAE AMS3315G-02-0 | 02-01-2012 | English | Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 397 | SAE AMS3057A-02-0 | 02-01-2012 | English | Lubricant, Semi-Fluid, for Aircraft Gearboxes - This document has been declared "Stabilized" by SAE |
| 398 | SAE AMS2518D-02-0 | 02-01-2012 | English | Thread Compound, Anti-Seize, Graphite-Petrolatum - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 399 | SAE J1154-02-0 | 02-01-2012 | English | Hydraulic Master Cylinders for Motor Vehicle Brakes - Performance Requirements - This document has been declared "Stabilized" by SAE |
| 400 | SAE AS34081A-02-0 | 02-01-2012 | English | (R) CONNECTORS, PLUG, ELECTRIC, 90 DEGREE ASSEMBLY, CRIMP CONTACT AN TYPE
DoD Adopted |
| 401 | SAE AIR1739B-02-0 | 02-01-2012 | English | (R) Information on Antiskid Systems |
| 402 | SAE J1706-02-0 | 02-01-2012 | English | (R) Production, Handling, and Dispensing of SAE J1703 Motor Vehicle Brake Fluids and J1704 Borate Ester Based Brake Fluids |
| 403 | SAE AS22759/50-02-0 | 02-01-2012 | English | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED CROSSLINKED MODIFIED ETFE, LOW FLUORIDE, NORMAL WEIGHT, 80 MICROINCH SILVER-COATED COPPER 200 °C, 600 VOLT |
| 404 | SAE J1153-02-0 | 02-01-2012 | English | Hydraulic Master Cylinders for Motor Vehicle Brakes Test Procedure - This document has been declared "Stabilized" by SAE |
| 405 | SAE AMS-G-81827A-02-0 | 02-01-2012 | English | Grease, Aircraft, High Load Capacity, Wide Temperature Range - This document has been declared "Stabilized" by SAE |
| 406 | SAE AIR6172-02-0 | 02-01-2012 | English | Ice Undercutting Test Method for Runways and Taxiways Deicing/Anti-icing Chemicals |
| 407 | SAE J1772-02-0 | 02-01-2012 | English | (R) SAE Electric Vehicle and Plug in Hybrid Electric Vehicle Conductive Charge Coupler |
| 408 | SAE J1807-02-0 | 02-01-2012 | English | Hydraulic Power Assist Brake Booster Test Procedure - This document has been declared "Stabilized" by SAE |
| 409 | SAE AS9482B-02-0 | 02-01-2012 | English | WASHER, FLAT – STEEL AMS6437 OR AMS6485 DIFFUSED NICKEL-CADMIUM PLATED, COUNTERSUNK - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 410 | SAE AS39029/76B-02-0 | 02-01-2012 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES I, II, III, IV CONNECTORS)
DoD Adopted |
| 411 | SAE J1873-02-0 | 02-01-2012 | English | Moisture Transmission Test Procedure - Hydraulic Brake Hose Assemblies |
| 412 | SAE AS50151A-02-0 | 02-01-2012 | English | Connectors, Electrical, Circular Threaded, AN Type, General Specification For
DoD Adopted |
| 413 | SAE J1979-02-0 | 02-01-2012 | English | E/E Diagnostic Test Modes |
| 414 | SAE J2031-02-0 | 02-01-2012 | English | High Tension Ignition Cable |
| 415 | SAE J2185-02-0 | 02-01-2012 | English | (R) Life Test for Heavy-Duty Storage Batteries (Lead Acid Type only) |
| 416 | SAE J2727-02-0 | 02-01-2012 | English | (R) Mobile Air Conditioning System Refrigerant Emission Charts for R-134a and R-1234yf |
| 417 | SAE J2848-3-02-0 | 02-01-2012 | English | Tire Pressure Systems - Management (CTIS) Type For Medium and Heavy Duty Highway Vehicles |
| 418 | SAE J2851-02-0 | 02-01-2012 | English | Recovery Equipment for Contaminated Refrigerant from Mobile Automotive Air Conditioning Systems |
| 419 | SAE AS21233A-02-0 | 02-01-2012 | English | BEARING, PLAIN, SELF-ALIGNING, PTFE LINED, NARROW
DoD Adopted |
| 420 | SAE AS81582/4A-02-0 | 02-01-2012 | English | (R) CONNECTOR ADAPTER, RFI SHIELDED, CABLE TO ELECTRIC CONNECTOR
DoD Adopted |
| 421 | SAE J2918-02-0 | 02-01-2012 | English | Engine-Off Cab Heating and Air Conditioning Systems Test Procedure and Performance Requirements - Trucks with and Without Sleepers |
| 422 | SAE J2938-02-0 | 02-01-2012 | English | LED Light Sources Tests and Requirements Standard Part 2: LED Lumen and Color Maintenance Measurements |
| 423 | SAE AS81659/33A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (DUAL INSERT, TYPE II, CLASS 1, (-65 °C TO +125 °C), SERIES 2, SHELL DESIGNATOR A)
DoD Adopted |
| 424 | SAE J2950-02-0 | 02-01-2012 | English | Recommended Practices (RP) for Shipping Transport and Handling of Automotive-Type Battery System - Lithium Ion |
| 425 | SAE J3003-02-0 | 02-01-2012 | English | Dimensional Specifications for General Service Sealed Lighting Units |
| 426 | SAE MA4248A-02-0 | 02-01-2012 | English | (R) CAP ASSEMBLY, PROTECTIVE CLOSURE BEAM SEAL FITTING, LOW PRESSURE, METRIC |
| 427 | SAE MAM3053A-02-0 | 02-01-2012 | English | Grease, Water Resistant Polyalphaolefin Base - This document has been declared "Stabilized" by SAE |
| 428 | SAE AS81659/35A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (DUAL INSERT, TYPE II, CLASS 1, (-65 °C TO +125 °C), SERIES 2, SHELL DESIGNATOR A)
DoD Adopted |
| 429 | SAE AS9320B-02-0 | 02-01-2012 | English | WASHER, FLAT – AMS6350 - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 430 | SAE MS1003-02-0 | 02-01-2012 | English | (R) Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| 431 | SAE AS8976A-02-0 | 02-01-2012 | English | (R) Bearings, Plain, Self-Aligning, All Metal General Specification for
DoD Adopted |
| 432 | SAE AS6254-02-0 | 02-01-2012 | English | Minimum Performance Standard for Low Frequency Underwater Locating Devices (Acoustic) (Self-Powered) |
| 433 | SAE AS5692/3-02-0 | 02-01-2012 | English | ARC FAULT CIRCUIT BREAKER – AIRCRAFT, TRIP FREE, 1 TO 20 AMP, TYPE I |
| 434 | SAE AS21230A-02-0 | 02-01-2012 | English | BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING PTFE LINED, WIDE
DoD Adopted |
| 435 | SAE AS5659-02-0 | 02-01-2012 | English | WDM LAN Standard |
| 436 | SAE AS5259/6-02-0 | 02-01-2012 | English | CRIMPING TOOL AND ACCESSORIES, INSPECTION GAGES, FOR AS5259 DIES |
| 437 | SAE AS5259/3-02-0 | 02-01-2012 | English | CRIMPING TOOL AND ACCESSORIES, HAND OPERATED, DIE TYPE, WIRE SIZES 8 TO 0000 |
| 438 | SAE AS81659/37A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (TRIPLE INSERT, TYPE II, CLASS 1, (-65 °C TO +125 °C), SERIES 2, SHELL DESIGNATOR A)
DoD Adopted |
| 439 | SAE J995-02-0 | 02-01-2012 | English | Mechanical and Material Requirements for Steel Nuts
DoD Adopted |
| 440 | SAE AS81659/39A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (TRIPLE INSERT, TYPE II, CLASS 1 (-65 °C TO +125 °C), SERIES 2, SHELL DESIGNATOR A)
DoD Adopted |
| 441 | SAE AS81659/41A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, CRIMP CONTACTS, (QUADRUPLE INSERT, TYPE II, CLASS 1 (-65 °C TO +125 °C), SERIES 2, SHELL DESIGNATOR A)
DoD Adopted |
| 442 | SAE AS81659/43A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, CRIMP CONTACTS, (QUADRUPLE INSERT, TYPE II, CLASS 1 (-65 °C TO +125 °C), SERIES 2, SHELL DESIGNATOR A)
DoD Adopted |
| 443 | SAE AS81659/53A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG ENVIRONMENT RESISTANT, CRIMP CONTACTS, TRIPLE INSERT, TYPE II, CLASS 1 (-65 °C TO +125 °C), SERIES 2, SHELL DESIGNATOR B
DoD Adopted |
| 444 | SAE AS21231A-02-0 | 02-01-2012 | English | BEARING, PLAIN, SELF-ALIGNING, PTFE LINED, WIDE
DoD Adopted |
| 445 | SAE AS81659/56A-02-0 | 02-01-2012 | English | (R) CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE ENVIRONMENT RESISTANT, CRIMP CONTACTS, TRIPLE INSERT, TYPE II, CLASS 2 (-65 °C TO +200 °C), SERIES 2, SHELL DESIGNATOR B
DoD Adopted |
| 446 | SAE AS34021C-02-0 | 02-01-2012 | English | CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE WITH
DoD Adopted |
| 447 | SAE AS125101 THRU AS125250C-02-0 | 02-01-2012 | English | RIVET - 100° COUNTERSUNK HEAD, MILD STEEL - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 448 | SAE AS4373E-02-0 | 02-01-2012 | English | Test Methods for Insulated Electric Wire |
| 449 | SAE ARP1051C-02-0 | 02-01-2012 | English | Format, Text, and Numbering System for Preparing Specifications Covering Civil Aircraft Ground Support Equipment |
| 450 | SAE AS125551 THRU AS125700B-02-0 | 02-01-2012 | English | RIVET – UNIVERSAL HEAD, MILD STEEL - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 451 | SAE J1523-02-0 | 02-01-2012 | English | (R) Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives |
| 452 | SAE J30-02-0 | 02-01-2012 | English | Fuel and Oil Hoses
DoD Adopted |
| 453 | SAE ARP922B-02-0 | 02-01-2012 | English | Electroluminescence, Design Criteria and Recommendations for Use in Aerospace Vehicle Crew Station Areas - This document has been declared "Stabilized" by SAE |
| 454 | SAE J958-02-0 | 02-01-2012 | English | Nomenclature and Dimensions for Crane Shovels - This document has been declared "Stabilized" by SAE |
| 455 | SAE J1321-02-0 | 02-01-2012 | English | Fuel Consumption Test Procedure - Type II |
| 456 | SAE J759-02-0 | 02-01-2012 | English | Lighting Identification Code
DoD Adopted |
| 457 | SAE AS39029/63A-02-0 | 02-01-2012 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-24308 CONNECTORS)
DoD Adopted |
| 458 | SAE AMS5529J-02-0 | 02-01-2012 | English | Steel, Corrosion Resistant, Sheet and Strip 17Cr - 7.1Ni - 1.1Al Solution Heat Treated and Cold Rolled, Precipitation Hardenable 0.0015 to 0.100 inch (0.038 to 2.54 mm) Nominal Thickness - UNS S17700
DoD Adopted |
| 459 | SAE AS5179B-02-0 | 02-01-2012 | English | NUT, FITTING, PORT
DoD Adopted |
| 460 | SAE AS116901 THRU AS116912B-02-0 | 02-01-2012 | English | SCREW – OVAL FILLISTER HEAD, .112-40 - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 461 | SAE AS116925 THRU AS116960B-02-0 | 02-01-2012 | English | SCREW – OVAL FILLISTER HEAD, .138-32 - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 462 | SAE AS116961 THRU AS117000C-02-0 | 02-01-2012 | English | SCREW – OVAL FILLISTER DRILLED HEAD, .138-32 - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 463 | SAE AS117001 THRU AS117040B-02-0 | 02-01-2012 | English | SCREW – OVAL FILLISTER HEAD, .164-32 - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 464 | SAE AS117041 THRU AS117080B-02-0 | 02-01-2012 | English | SCREW – OVAL FILLISTER DRILLED HEAD, .164-32 - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 465 | SAE AMS4500J-02-0 | 02-01-2007(R 2012) | English | Copper, Sheet, Strip, and Plate Soft Annealed - UNS C11000
DoD Adopted |
| 466 | SAE AMS4147D-02-0 | 02-01-2007(R 2012) | English | Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged - UNS A97075
DoD Adopted |
| 467 | SAE AMS2223H-02-0 | 02-01-2006(R 2012) | English | Tolerances Copper and Copper Alloy Seamless Tubing |
| 468 | SAE AS85848/2-02-0 | 02-01-2002(R 2012) | English | SLEEVING, FOR IDENTIFICATION MARKING HEAT SHRINKABLE, POLYVINYLIDENE FLUORIDE, FLEXIBLE
DoD Adopted |
| 469 | SAE AS85848/1-02-0 | 02-01-2002(R 2012) | English | Sleeving, for Identification Marking, Heat Shrinkable, Polyolefin, Flexible
DoD Adopted |
| 470 | SAE J514-01-0 | 01-01-2012 | English | Hydraulic Tube Fittings
DoD Adopted |
| 471 | SAE AMS3648C-01-0 | 01-01-2012 | English | Tubing, Polychlorotrifluoroethylene (PCTFE) Unplasticized - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 472 | SAE AMS3646D-01-0 | 01-01-2012 | English | Sheet, Polychlorotrifluoroethylene (PCTFE), Molded, Unplasticized - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 473 | SAE AMS3645D-01-0 | 01-01-2012 | English | Polychlorotrifluoroethylene (PCTFE), Compression Molded Heavy Sections, Unplasticized - This document has been declared "Stabilized" by SAE |
| 474 | SAE AMS3642E-01-0 | 01-01-2012 | English | Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant - This document has been declared "Stabilized" by SAE |
| 475 | SAE AMS3639G-01-0 | 01-01-2012 | English | Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio - This document has been declared "Stabilized" by SAE |
| 476 | SAE AMS3638G-01-0 | 01-01-2012 | English | Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 477 | SAE AMS3637G-01-0 | 01-01-2012 | English | Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio - This document has been declared "Stabilized" by SAE |
| 478 | SAE AMS3636H-01-0 | 01-01-2012 | English | Tubing, Plastic, Electrical Insulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 479 | SAE AMS3635E-01-0 | 01-01-2012 | English | Plastic Sheet and Strip, Modified Vinyl, Foamed Closed Cell - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 480 | SAE AMS3634E-01-0 | 01-01-2012 | English | Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable - This document has been declared "Stabilized" by SAE |
| 481 | SAE AMS3378B-01-0 | 01-01-2012 | English | Sealant, Silicone, Two-Part, General Purpose Room Temperature Vulcanizing Non-Fuel Resistant - This document has been declared "Stabilized" by SAE |
| 482 | SAE AMS3375C-01-0 | 01-01-2012 | English | Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 483 | SAE AMS3373C-01-0 | 01-01-2012 | English | Compound, Silicone Rubber, Insulating and Sealing 35 to 55 - This document has been declared "Stabilized" by SAE |
| 484 | SAE AMS3373/2B-01-0 | 01-01-2012 | English | Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure - This document has been declared "Stabilized" by SAE |
| 485 | SAE AMS3373/1B-01-0 | 01-01-2012 | English | Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure - This document has been declared "Stabilized" by SAE |
| 486 | SAE AMS3372B-01-0 | 01-01-2012 | English | Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure - This document has been declared "Stabilized" by SAE |
| 487 | SAE AMS3370B-01-0 | 01-01-2012 | English | Silicone Resin, Elastomeric, Transparent Room Temperature Cure - This document has been declared "Stabilized" by SAE |
| 488 | SAE AMS3368B-01-0 | 01-01-2012 | English | Silicone Resin, Elastomeric, Transparent Elevated Temperature Cure - This document has been declared "Stabilized" by SAE |
| 489 | SAE AMS3366C-01-0 | 01-01-2012 | English | Silicone Rubber Compound Room Temperature Vulcanizing, 55,000 Centipoise Viscosity Durometer 55 - 70 - This document has been declared "Stabilized" by SAE |
| 490 | SAE AMS3364D-01-0 | 01-01-2012 | English | Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 - 55 - This document has been declared "Stabilized" by SAE |
| 491 | SAE AMS3363E-01-0 | 01-01-2012 | English | Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30 - 45 - This document has been declared "Stabilized" by SAE |
| 492 | SAE AS9218E-01-0 | 01-01-2012 | English | BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, UNS K14675, 195 KSI MIN, .2500-28 UNJF-3A - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 493 | SAE AMS3362D-01-0 | 01-01-2012 | English | Silicone Rubber Compound Room Temperature Vulcanizing, 15,000 Centipoise Viscosity Durometer 35 - 55 - This document has been declared "Stabilized" by SAE |
| 494 | SAE AMS3361C-01-0 | 01-01-2012 | English | Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa⋅s) Viscosity - This document has been declared "Stabilized" by SAE |
| 495 | SAE AMS3358C-01-0 | 01-01-2012 | English | Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa⋅s) Viscosity - This document has been declared "Stabilized" by SAE |
| 496 | SAE AMS3333B-01-0 | 01-01-2012 | English | Sealing Compound, Polysulfide For Aircraft Windshields and Canopies, For Use up to 250 °F (121 °C) - This document has been declared "Stabilized" by SAE |
| 497 | SAE AMS3132J-01-0 | 01-01-2012 | English | Varnish, Phenolic Resin Corrosion-Preventive - This document has been declared "Stabilized" by SAE |
| 498 | SAE AMS3125H-01-0 | 01-01-2012 | English | Enamel, Glyceryl Phthalate Engine Gray Baking - This document has been declared "Stabilized" by SAE |
| 499 | SAE AMS3120H-01-0 | 01-01-2012 | English | Enamel, Glyceryl Phthalate Black Baking - This document has been declared "Stabilized" by SAE |
| 500 | SAE AMS3060B-01-0 | 01-01-2012 | English | Compound, Rust Inhibiting Aircraft Engine Components |
|