| Pos | standard Number | publication date | Language | Description |
| 1 | SAE J1579-1989 | 1989-06-01(R 2009) | English | Motorcycle Side Stand Retraction Performance Requirements |
| 2 | SAE J1959-1989 | 1989-06-01(R 2003) | English | Corrosion Preventive Compound, Underbody Vehicle Corrosion Protection |
| 3 | SAE J958-1989 | 1989-06-01(R 2003) | English | Nomenclature and Dimensions for Crane Shovels |
| 4 | SAE J643-1989 | 1989-06-01(R 2000) | English | Hydrodynamic Drive Test Code |
| 5 | SAE J1804-1989 | 1989-06-01 | English | Corrosion Preventive Compound, Topside Vehicle Corrosion Protection, Standard |
| 6 | SAE J2025-1989 | 1989-06-01 | English | Method for Evaluating the Flow Properties of Pumpable Sealers, Recommended Practice |
| 7 | SAE J1596-1989 | 1989-06-01 | English | Automotive V-Ribbed Belt Drives and Test Methods, Recommended Practice |
| 8 | SAE EDIF 2-1989 | 1989-06-01 | English | EDIF Connectivity Monograph Series - Volume 2; Formerly TechAmerica EDIF 2 |
| 9 | SAE J1847-1989 | 1989-06-01 | English | Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping, Recommended Practice
ANSI Approved |
| 10 | SAE J137-1989 | 1989-06-01 | English | Lighting and Marking of Agricultural Equipment on Highways |
| 11 | SAE MA4045-1989 | 1989-05-22(R 2012) | English | WASHER, CUP, LOCK - SPANNER NUT AMS 5646, METRIC |
| 12 | SAE MA4045-1989 | 1989-05-22(R 2006) | English | WASHER, CUP, LOCK - SPANNER NUT AMS 5646, METRIC
DoD Adopted |
| 13 | SAE MA3441-1989 | 1989-05-08(R 2012) | English | WASHER-KEY, CUP LOCK, AMS5510, METRIC |
| 14 | SAE MA3441-1989 | 1989-05-08(R 2006) | English | Washer-Key, Cup Lock, AMS 5510, Metric |
| 15 | SAE J1950-1989 | 1989-05-01 | English | Proving Ground Vehicle Corrosion Testing, Information Report |
| 16 | SAE J1856-1989 | 1989-05-01 | English | Identification of Automotive Air Bags, Recommended Practice
ANSI Approved |
| 17 | SAE ARP1989-1989 | 1989-05-01 | English | HELICOPTER EXTERNAL NOISE ESTIMATION |
| 18 | SAE ARP936A-1989 | 1989-04-27(R 2003) | English | Capacitor, 10 Microfarad for EMI Measurements |
| 19 | SAE ARP1940-1989 | 1989-04-26 | English | Solid-State Frequency Converter 400 Hertz, 3-Phase Output
ANSI Approved |
| 20 | SAE AIR4093-1989 | 1989-04-17(R 2008) | English | COMPENDIUM OF GAS PROPERTIES |
| 21 | SAE J1958-1989 | 1989-04-01(R 2002) | English | Diesel Engines - Steel Tubes for High-Pressure Fuel Injection Pipes (Tubing) |
| 22 | SAE J1826-1989 | 1989-04-01(R 1995) | English | Turbocharger Gas Stand Test Code, Recommended Practice; |
| 23 | SAE J621-1989 | 1989-04-01(R 1995) | English | Industrial Power Take-Offs with Driving Ring-Type Overcenter Clutches |
| 24 | SAE J693-1989 | 1989-04-01 | English | Truck Overall Widths Across Dual Tires, Information Report |
| 25 | SAE AIR1184A-1989 | 1989-03-27(R 2007) | English | Capacitive Fuel Gauging System Accuracies |
| 26 | SAE AS678C-1989 | 1989-03-03(R 1994) | English | Gasket - 18mm Folded Steel Aircraft |
| 27 | SAE AS814A-1989 | 1989-03-03(R 1994) | English | Spark Igniter Outline .750-20 Thread Mounting
ANSI Approved |
| 28 | SAE AS475A-1989 | 1989-03-02(R 1994) | English | Gasket-Spark Igniter |
| 29 | SAE AS424A-1989 | 1989-03-02(R 1994) | English | Spark Igniter Outline Threaded Mounting |
| 30 | SAE AS422A-1989 | 1989-03-02(R 1994) | English | Spark Igniter Outline Right Angle Flange Mounting |
| 31 | SAE AS423A-1989 | 1989-03-02(R 1994) | English | Spark Igniter Outline Flange Mounting |
| 32 | SAE AS453A-1989 | 1989-03-02(R 1994) | English | Spark Igniter Gasket-Flange
ANSI Approved |
| 33 | SAE J1942-1989 | 1989-03-01(R 2014) | English | Hose and Hose Assemblies for Marine Applications(DoD Adopted) |
| 34 | SAE AS758B-1989 | 1989-03-01(R 2013) | English | FITTINGS - INSTALLATION IN STRAIGHT THREADED BOSS |
| 35 | SAE AS758B-1989 | 1989-03-01(R 2007) | English | Fittings - Installation in Straight Threaded Boss |
| 36 | SAE J1948-1989 | 1989-03-01(R 2003) | English | Cab Sleeper Occupant Restraint System Test |
| 37 | SAE ARP4103-1989 | 1989-02-27(R 2008) | English | Flight Deck Lighting for Commercial Transport Aircraft |
| 38 | SAE HIR1149B-1989 | 1989-02-21 | English | HYDRAULIC FLUIDS FOR MARINE VEHICLES |
| 39 | SAE AIR1276A-1989 | 1989-02-13(R 2007) | English | Aircraft Flashtube Anticollision Lighting Systems |
| 40 | SAE ARP4101/2-1989 | 1989-02-01(R 2003) | English | Pilot Visibility from the Flight Deck |
| 41 | SAE AS4115-1989 | 1989-01-11(R 2011) | English | TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS SYSTEM |
| 42 | SAE AS4112-1989 | 1989-01-11(R 2011) | English | PRODUCTION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS REMOTE TERMINALS |
| 43 | SAE AS4113-1989 | 1989-01-11(R 2011) | English | VALIDATION TEST PLAN FOR THE DIGITAL TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS BUS CONTROLLERS |
| 44 | SAE AS4114-1989 | 1989-01-11(R 2011) | English | PRODUCTION TEST PLAN FOR THE TIME DIVISION COMMAND/RESPONSE MULTIPLEX DATA BUS BUS CONTROLLERS |
| 45 | SAE AS4114-1989 | 1989-01-11(R 2006) | English | Production Test Plan for the Time Division Command/Response Multiplex Data Bus Bus Controllers |
| 46 | SAE AS4112-1989 | 1989-01-11(R 2006) | English | Production Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Remote Terminals |
| 47 | SAE AS4113-1989 | 1989-01-11(R 2006) | English | Validation Test Plan for the Digital Time Division Command/Response Multiplex Data Bus Bus Controllers |
| 48 | SAE AS4115-1989 | 1989-01-11(R 2006) | English | Test Plan for the Digital Time Division Command/Response Multiplex Data Bus System |
| 49 | SAE ARP1927-1989 | 1989-01-01(R 2014) | English | Application of Direct Pressure to Resin in Curing of Epoxy and Addition Type Polyimides(DoD Adopted) |
| 50 | SAE MA2080-1989 | 1989-01-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204掳C, 21,000 KPA, 60-DEG CONE, STRAIGHT TO STRAIGHT, LIGHTWEIGHT, METRIC
DoD Adopted |
| 51 | SAE MA2081-1989 | 1989-01-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204掳C, 21,000 kPa, 60-DEG CONE, STRAIGHT TO 45-DEG, LIGHTWEIGHT, METRIC
DoD Adopted |
| 52 | SAE MA2082-1989 | 1989-01-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204掳C, 21,000 kPa, 60-DEG CONE, STRAIGHT TO 90-DEG, LIGHTWEIGHT, METRIC
DoD Adopted |
| 53 | SAE MA2083-1989 | 1989-01-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204掳C, 21,000 kPa, 60-DEG CONE, 45-DEG TO 45-DEG, LIGHTWEIGHT, METRIC
DoD Adopted |
| 54 | SAE MA2084-1989 | 1989-01-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204掳C, 21,000 kPa, 60-DEG CONE, 45-DEG TO 90-DEG, LIGHTWEIGHT, METRIC
DoD Adopted |
| 55 | SAE AMS3894/14A-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 175 (347) |
| 56 | SAE AMS3894/16A-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 21,000,000 (145) Modulus, 175 (347) |
| 57 | SAE AMS3894/13A-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 131,000 (903) Tensile, 25,000,000 (172) Modulus, 175 (347) |
| 58 | SAE AMS3894/15A-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 21,000,000 (145) Modulus, 175 (347) |
| 59 | SAE AMS3894/7B-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 80 (176)
DoD Adopted |
| 60 | SAE AMS3894/1B-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 175 (347)
DoD Adopted |
| 61 | SAE AMS3894/5B-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 80 (176)
DoD Adopted |
| 62 | SAE AMS3894/2B-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus, 175 (347)
DoD Adopted |
| 63 | SAE AMS3894/10A-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 210,000 (1448) Tensile, 20,000,000 (138) Modulus, 175 (347)
DoD Adopted |
| 64 | SAE AMS3894/3B-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus, 80 (176)
DoD Adopted |
| 65 | SAE AMS3894/11A-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 18,000,000 (124) Modulus, 80 (176)
DoD Adopted |
| 66 | SAE AMS3894/12A-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 200,000 (1379) Tensile, 18,000,000 (124) Modulus, 120 (248) |
| 67 | SAE AMS3894/8B-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 80 (176)
DoD Adopted |
| 68 | SAE AMS3894/9B-1989 | 1989-01-01(R 2005) | English | Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 175 (347)
DoD Adopted |
| 69 | SAE MA2004A-1989 | 1989-01-01(R 2004) | English | Thermal Shock Testing of Fluid System Piping and Fittings |
| 70 | SAE ARP1927-1989 | 1989-01-01(R 1995) | English | Application of Direct Pressure to Resin in Curing of Epoxy and Addition Type Polyimides
DoD Adopted |
| 71 | SAE AMS3792/1A-1989 | 1989-01-01(R 1994) | English | Tape, Low Modulus Aramid 2 (51), 300 (1334) Breaking Strength
DoD Adopted |
| 72 | SAE AMS3792/3A-1989 | 1989-01-01(R 1994) | English | Tape, Low Modulus Aramid 2 (51), 3000 (13,345) Breaking Strength
DoD Adopted |
| 73 | SAE AMS3792/2A-1989 | 1989-01-01(R 1994) | English | Tape, Low Modulus Aramid 2 (51), 1000 (4448) Breaking Strength
DoD Adopted |
| 74 | SAE AMS3894/6B-1989 | 1989-01-01(R 1994) | English | Carbon (Graphite) Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 175 (347) |
| 75 | SAE AMS3894/4B-1989 | 1989-01-01(R 1994) | English | Carbon (Graphite) Fiber Tape and Sheet Epoxy Resin Impregnated G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 80 (176) |
| 76 | SAE MA1547A-1989 | 1989-01-01(R 1991)(R 1995) | English | Wrenches, Twelve Spline, Metric
DoD Adopted | ANSI Approved |
| 77 | SAE MA2080-1989 | 1989-01-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204 ⁰C, 21,000 KPA, 60-DEG CONE, STRAIGHT TO STRAIGHT, LIGHTWEIGHT, METRIC |
| 78 | SAE AMS4630G-1989 | 1989-01-01 | English | ALUMINUM BRONZE BARS, RODS, TUBING, AND FORGINGS 90CU - 8.5A1 SOFT |
| 79 | SAE MA2004A-1989 | 1989-01-01 | English | Thermal Shock Testing of Fluid System Piping and Fittings |
| 80 | SAE AMS4018C-1989 | 1989-01-01 | English | Aluminum Alloy Sheet and Plate 3.5Mg - 0.25Cr (5154-0) |
| 81 | SAE AMS4019A-1989 | 1989-01-01 | English | ALUMINUM ALLOY SHEET AND PLATE 3.5MG - 0.25CR (A54S-H32) |
| 82 | SAE AMS4020B-1989 | 1989-01-01 | English | ALUMINUM ALLOY PLATE, ALCLAD 1.0MG - 0.60SI - 0.28CU - 0.25CR (ALCLAD 6061-T651) |
| 83 | SAE MA2081-1989 | 1989-01-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 204 ⁰C, 21,000 KPA, 60-DEG CONE, STRAIGHT TO 45-DEG, LIGHTWEIGHT, METRIC |
| 84 | SAE AMS4043B-1989 | 1989-01-01 | English | ALUMINUM ALLOY PLATE 1.0MG - 0.60SI - 0.28CU - 0.25CR (6061-T451) |
| 85 | SAE J1120-1989 | 1989-01-01 | English | Spherical Rod Ends, Standard
ANSI Approved |
| 86 | SAE AE-14-1989 | 1989-01-01 | English | Multiaxial Fatigue Analysis and Experiments - ***To Purchase: Contact IHS at 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide*** |
| 87 | SAE J1024-1989 | 1989-01-01 | English | Fuel-Fired Heaters - Air Heating - for Construction and Industrial Machinery, Standard
DoD Adopted | ANSI Approved |
| 88 | SAE DMG-2-1989 | 1989-01-01 | English | Automated Data Management Guideline - Formerly TechAmerica DMG-2 |
| 89 | SAE SYSB-1-1989 | 1989-01-01 | English | System Engineering - Formerly TechAmerica SYSB-1 |
| 90 | SAE AS707B-1988 | 1988-12-01(R 2012) | English | Thermal Sensitive Inflation Pressure Release Devices for Tubeless Aircraft Wheels |
| 91 | SAE AS707B-1988 | 1988-12-01(R 2006) | English | Thermal Sensitive Inflation Pressure Release Devices for Tubeless Aircraft Wheels |
| 92 | SAE J899-1988 | 1988-12-01 | English | Operator´s Seat Dimensions for Off-Road Self-Propelled Work Machines, Standard |
| 93 | SAE J172-1988 | 1988-12-01 | English | HARD DRAWN CARBON STEEL VALVE SPRING QUALITY WIRE AND SPRINGS |
| 94 | SAE ARP716C-1988 | 1988-11-10(R 1994) | English | Gap Settings for Aircraft Piston Engine Spark Plugs |
| 95 | SAE ARP908C-1988 | 1988-11-01(R 2013) | English | Torque Requirements, Installation and Qualification Test, Hose and Tube Fitting. |
| 96 | SAE J927-1988 | 1988-11-01(R 1995) | English | Flywheels for Engine-Mounted Torque Converters, Recommended Practice |
| 97 | SAE J1033-1988 | 1988-11-01(R 1993) | English | Procedure for Measuring Bore and Face Runout of Flywheels, Flywheel Housings, and Flywheel Housing Adapters, Recommended Practice |
| 98 | SAE J1496-1988 | 1988-11-01 | English | REPLACEABLE BULBS FOR HEADLAMPS |
| 99 | SAE AIR1916A-1988 | 1988-11-01 | English | AEROSPACE FLUID POWER AND CONTROL / ACTUATION SYSTEM GLOSSARY |
| 100 | SAE AMS3689B-1988 | 1988-10-01(R 2014) | English | Adhesive, Foaming, Honeycomb, Core Splice, Structural -54 to +177 °C (-65 to +350 °F)(DoD Adopted) |
| 101 | SAE AMS3688B-1988 | 1988-10-01(R 2014) | English | Adhesive, Foaming, Honeycomb Core Splice, Structural -55 °C to +82 °C (-65 °F to +180 °F)(DoD Adopted) |
| 102 | SAE AMS3897/1-1988 | 1988-10-01(R 2005) | English | Carbon Fiber Cloth 8HS Style Fabric Epoxy Resin Impregnated |
| 103 | SAE AMS3897-1988 | 1988-10-01(R 2005) | English | Cloth, Carbon Fiber, Resin Impregnated |
| 104 | SAE AMS3688B-1988 | 1988-10-01(R 2005) | English | Adhesive, Foaming, Honeycomb Core Splice, Structural -55 Degrees C to +82 Degrees C (-65 Degrees F to +180 Degrees F)
DoD Adopted |
| 105 | SAE AMS3689B-1988 | 1988-10-01(R 2005) | English | Adhesive, Foaming, Honeycomb, Core Splice, Structural -54 Degrees to +177 Degrees C (-65 Degrees to +350 Degrees F)
DoD Adopted |
| 106 | SAE J336-1988 | 1988-10-01(R 2001) | English | Sound Level for Truck Cab Interior
DoD Adopted | ANSI Approved |
| 107 | SAE AMS3077-1988 | 1988-10-01(R 1994) | English | Compound, Corrosion Preventive Soft Film, Thixotropic, Cold Application |
| 108 | SAE J620-1988 | 1988-10-01(R 1993) | English | Flywheels for Industrial Engines Used with Industrial Power Take-Offs Equipped with Driving-Ring Type Overcenter Clutches and Engine-Mounted Marine Gears and Single Bearing Engine-Mounted Power Generators
ANSI Approved |
| 109 | SAE AMS2201M-1988 | 1988-10-01 | English | TOLERANCES ALUMINUM AND ALUMINUM ALLOY BAR, ROD, WIRE, AND FORGING STOCK ROLLED OR COLD-FINISHED |
| 110 | SAE J1907-1988 | 1988-10-01 | English | Peel Adhesion Test for Glass to Elastomeric Material for Automotive Glass Encapsulation, Recommended Practice |
| 111 | SAE J211-1988 | 1988-10-01 | English | INSTRUMENTATION FOR IMPACT TEST
DoD Adopted |
| 112 | SAE J1547-1988 | 1988-10-01 | English | Electromagnetic Susceptibility Procedures for Common Mode Injection (1 - 400 MHz), Module Testing, Information Report; |
| 113 | SAE J1213-2-1988 | 1988-10-01 | English | Glossary of Reliability Terminology Associated with Automotive Electronics, Information Report |
| 114 | SAE AIR1244A-1988 | 1988-10-01 | English | Selecting Slipper Seals for Hydraulic-Pneumatic Fluid Power Applications |
| 115 | SAE J1949-1988 | 1988-10-01 | English | Road Vehicles - High Pressure Fuel Injection Pipe End-Connections with 60 Degree Female Cone, Standard;
ANSI Approved |
| 116 | SAE J1969-1988 | 1988-10-01 | English | Electrocoat Compatibilities of Automotive Sealers, Recommended Practice
ANSI Approved |
| 117 | SAE J1595-1988 | 1988-10-01 | English | Electrostatic Discharge Test for Vehicles, Information Report; |
| 118 | SAE J1836-1988 | 1988-10-01 | English | Overlap Shear Test for Sealant Adhesive Bonding of Automotive Glass Encapsulating Material to Body Opening, Recommended Practice
ANSI Approved |
| 119 | SAE AS4074.1-1988 | 1988-09-07 | English | LINEAR TOKEN PASSING MULTIPLEX DATA BUS |
| 120 | SAE MA3445-1988 | 1988-09-01(R 2012) | English | PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC |
| 121 | SAE MA3445-1988 | 1988-09-01(R 2004) | English | PACKING, PREFORMED O-RING SEAL, FLUOROCARBON (MIL-R-83485, TYPE I), METRIC
DoD Adopted |
| 122 | SAE J1079-1988 | 1988-09-01(R 1995) | English | Overcenter Clutch Spin Test Procedure, Recommended Practice |
| 123 | SAE EDIF 1-1988 | 1988-09-01 | English | Introduction to EDIF Monograph Series - Volume 1; Formerly TechAmerica EDIF 1 |
| 124 | SAE J1173-1988 | 1988-09-01 | English | Size Classification and Characteristics of Glass Beads for Peening, Recommended Practice |
| 125 | SAE J680-1988 | 1988-09-01 | English | Location and Operation of Instruments and Controls in Motor Truck Cabs, Recommended Practice |
| 126 | SAE J1057-1988 | 1988-09-01 | English | Identification Terminology of Earthmoving Machines, Standard
ANSI Approved |
| 127 | SAE J1173-1988 | 1988-09-01 | English | Size Classification and Characteristics of Glass Beads for Peening |
| 128 | SAE ARP4014-1988 | 1988-08-31(R 2007) | English | AIRCRAFT TURBINE ENGINE PNEUMATIC COMPONENT CONTAMINATED AIR ENDURANCE TEST |
| 129 | SAE AS4074.2-1988 | 1988-08-29 | English | High Speed Ring Bus |
| 130 | SAE MA1573-1988 | 1988-08-26(R 2004) | English | Nut, Self-Locking - Steel, Class 1100 MPa/235掳C, MJ Thread Procurement Specification For, Metric
DoD Adopted |
| 131 | SAE ARP4107-1988 | 1988-08-22(R 2008) | English | Aerospace Glossary for Human Factors Engineers |
| 132 | SAE J1881-1988 | 1988-08-01 | English | Initial Graphics Exchange Specification, Recommended Practice
ANSI Approved |
| 133 | SAE MA2006-1988 | 1988-08-01 | English | Hydraulic Tubing - Qualification Test Requirements |
| 134 | SAE AS4251-1988 | 1988-07-01(R 2013) | English | Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects |
| 135 | SAE ARP4102/3-1988 | 1988-07-01(R 2008) | English | Flight Deck Tire Pressure Monitoring System (TPMS) |
| 136 | SAE ARP4102/5-1988 | 1988-07-01(R 2008) | English | PRIMARY FLIGHT CONTROLS BY ELECTRICAL SIGNALING SECTION I
ANSI Approved |
| 137 | SAE ARP4102/6-1988 | 1988-07-01(R 2007) | English | Communications and Navigation Equipment |
| 138 | SAE ARP4104-1988 | 1988-07-01(R 2007) | English | Design Objectives for Handling Qualities of Transport Aircraft |
| 139 | SAE ARP4102/7-1988 | 1988-07-01(R 2007) | English | Electronic Displays |
| 140 | SAE ARP4102/4-1988 | 1988-07-01(R 2007) | English | Flight Deck Alerting System (FAS) |
| 141 | SAE ARP4102-1988 | 1988-07-01(R 2007) | English | Flight Deck Panels, Controls, and Displays |
| 142 | SAE ARP4101/9-1988 | 1988-07-01(R 2007) | English | Crew Safety Provisions for Cargo Aircraft |
| 143 | SAE ARP4101/8-1988 | 1988-07-01(R 2007) | English | Flight Deck Interior Doors for Transport Aircraft |
| 144 | SAE ARP4101/7-1988 | 1988-07-01(R 2007) | English | Flight Deck Escape Provisions for Transport Aircraft |
| 145 | SAE ARP4101/6-1988 | 1988-07-01(R 2007) | English | Stowage of Flight Crew麓s Survival Emergency and Miscellaneous Equipment |
| 146 | SAE MA2002A-1988 | 1988-07-01(R 2007) | English | Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies |
| 147 | SAE AS4251-1988 | 1988-07-01(R 2004) | English | Coupling Assemblies, Non-Locking Probe Style, Self-Aligning, Self-Sealing Disconnects |
| 148 | SAE ARP4102/2-1988 | 1988-07-01(R 2004) | English | Automatic Braking System (ABS) |
| 149 | SAE ARP4102/1-1988 | 1988-07-01(R 2004) | English | On Board Weight and Balance System |
| 150 | SAE ARP4101-1988 | 1988-07-01(R 2003) | English | Flight Deck Layout and Facilities |
| 151 | SAE ARP4101/4-1988 | 1988-07-01(R 2003) | English | Flight Deck Environment |
| 152 | SAE AMS3813A-1988 | 1988-07-01(R 1998) | English | Rope, Aramid Fiber, Jacketed for Antenna- Support Systems
DoD Adopted |
| 153 | SAE J922-1988 | 1988-07-01(R 1995) | English | Turbocharger Nomenclature and Terminology, Recommended Practice |
| 154 | SAE AMS3360-1988 | 1988-07-01 | English | SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 - 600 POISE VISCOSITY |
| 155 | SAE ARP4102/3-1988 | 1988-07-01 | English | Flight Deck Tire Pressure Monitoring System (TPMS) |
| 156 | SAE MA4035-1988 | 1988-06-09(R 2012) | English | Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric |
| 157 | SAE MA4036-1988 | 1988-06-09(R 2012) | English | Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric |
| 158 | SAE MA4035-1988 | 1988-06-09(R 2004) | English | Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant, Procurement Specification For, Metric
DoD Adopted |
| 159 | SAE MA4036-1988 | 1988-06-09(R 2004) | English | Rings, Retaining - Tapered Width, Uniform Thickness Corrosion Resistant, Procurement Specification For, Metric
DoD Adopted |
| 160 | SAE AS3409-1988 | 1988-06-01(R 2004) | English | BOLT, TEE HEAD - AMS 5662, CHAMFERED, .190-32UNJF-3A (STRESS RUPTURE RESISTANT) |
| 161 | SAE J185-1988 | 1988-06-01(R 2003) | English | Access Systems for Off-Road Machines
DoD Adopted |
| 162 | SAE J626-1988 | 1988-06-01(R 1998) | English | Diesel Fuel Injection - End-Mounting Flanges for Fuel Injection Pumps |
| 163 | SAE J39-1988 | 1988-06-01(R 1993) | English | T-Hook Slots for Securement in Shipment of Agricultural Equipment |
| 164 | SAE HS-1582-1988 | 1988-06-01 | English | Manual on Design and Manufacture of Coned Disk Springs (Belleville Springs) and Spring Washers - First Edition |
| 165 | SAE J249-1988 | 1988-06-01 | English | Mechanical Stop Lamp Switch |
| 166 | SAE ARP1874-1988 | 1988-05-26(R 2008) | English | Design Objectives for CRT Displays for Part 25 (Transport) Aircraft |
| 167 | SAE AIR1873-1988 | 1988-05-05(R 2012) | English | Guide to Limited Engine Monitoring Systems for Aircraft Gas Turbine Engines |
| 168 | SAE AIR1873-1988 | 1988-05-05(R 2005) | English | Guide to Limited Engine Monitoring Systems for Aircraft Gas Turbine Engines |
| 169 | SAE J1877-1988 | 1988-05-01(R 2012) | English | Recommended Practice for Bar-Coded Vehicle Identification Number Label |
| 170 | SAE MA2116-1988 | 1988-05-01(R 2004) | English | Union, Reducer, Flareless Tube or Boss |
| 171 | SAE MA2115-1988 | 1988-05-01(R 2004) | English | Union, Flareless Tube or Boss |
| 172 | SAE J1877-1988 | 1988-05-01(R 1994) | English | Recommended Practice for Bar-Coded Vehicle Identification Number Label, Recommended Practice |
| 173 | SAE MA2116-1988 | 1988-05-01 | English | UNION, REDUCER, FLARELESS TUBE OR BOSS |
| 174 | SAE MA2115-1988 | 1988-05-01 | English | UNION, FLARELESS TUBE OR BOSS |
| 175 | SAE AS8006-1988 | 1988-04-28(R 1993) | English | Minimum Performance Standard for Pitot and Pitot-Static Tubes |
| 176 | SAE MA4070-1988 | 1988-04-20(R 2013) | English | Pins, Procurement Specification For, Metric(DoD Adopted) |
| 177 | SAE MA4070-1988 | 1988-04-20(R 2004) | English | Pins, Procurement Specification for, Metric
DoD Adopted |
| 178 | SAE AMS7264A-1988 | 1988-04-01(R 2007) | English | RINGS, SEALING, SILICONE RUBBER High Temperature Resistant, Low Compression Set 65 - 75
DoD Adopted |
| 179 | SAE MA2158-1988 | 1988-04-01(R 2007) | English | Cross, Swivel, Flareless Tube |
| 180 | SAE MA2157-1988 | 1988-04-01(R 2004) | English | Cross, Bulkhead, Flareless Tube |
| 181 | SAE AMS4227B-1988 | 1988-04-01 | English | ALUMINUM ALLOY CASTINGS, SAND 8.0Cu - 6.0Mg - 0.50Mn - 0.50Ni (A240.0-F) As Cast - UNS A12400 |
| 182 | SAE J1549-1988 | 1988-04-01 | English | Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies, Recommended Practice |
| 183 | SAE J1549-1988 | 1988-04-01 | English | Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies |
| 184 | SAE MA2157-1988 | 1988-04-01 | English | CROSS, BULKHEAD, FLARELESS TUBE |
| 185 | SAE J1284-1988 | 1988-04-01 | English | Blade Type Electric Fuses, Standard |
| 186 | SAE AMS4631E-1988 | 1988-04-01 | English | Aluminum Bronze Rods, Bars, and Forgings 90.5 Cu - 7.5 Al - 1.95: Stress Relieved - Reaffirmed Noncurrent April 2006 |
| 187 | SAE MA2158-1988 | 1988-04-01 | English | Cross, Swivel, Flareless Tube |
| 188 | SAE J1549-1988 | 1988-04-01 | English | Diesel Fuel Injection Pump - Validation of Calibrating Nozzle Holder Assemblies |
| 189 | SAE J656-1988 | 1988-04-01 | English | Automotive Brake Definitions and Nomenclature |
| 190 | SAE AMS3739A-1988 | 1988-04-01 | English | POTTING COMPOUND, EPOXY FILLED 9-1 CTE, 250 HDT |
| 191 | SAE J1515-1988 | 1988-03-01(R 1995) | English | Impact of Alternative Fuels on Engine Test and Reporting Procedures, Information Report; |
| 192 | SAE J1883-1988 | 1988-03-01(R 1994) | English | Elastomeric Bushing "TRAC" Application Code, Recommended Practice |
| 193 | SAE CMB 6-5-1988 | 1988-03-01 | English | Textbook for Configuration Status Accounting - Formerly TechAmerica CMB 6-5 |
| 194 | SAE J1407-1988 | 1988-03-01 | English | Vehicle Electromagnetic Radiated Susceptibility Testing Using a Large TEM Cell, Information Report; |
| 195 | SAE J1356-1988 | 1988-02-01(R 2013) | English | Minimum Performance Criteria for Falling Object Guards for Excavators |
| 196 | SAE MA2093-1988 | 1988-02-01(R 2012) | English | Fitting End, Dimensions, Fluid Systems Port Connection, Metric |
| 197 | SAE J1356-1988 | 1988-02-01(R 2008) | English | Minimum Performance Criteria for Falling Object Guards for Excavators |
| 198 | SAE MA2110A-1988 | 1988-02-01(R 2004) | English | Port, Ring Locked Design Standard Dimensions for |
| 199 | SAE MA2114A-1988 | 1988-02-01(R 2004) | English | Adapter - Port Connection, Ring Locked Installation and Removal of |
| 200 | SAE MA2093-1988 | 1988-02-01(R 2004) | English | Fitting End, Dimensions, Fluid Systems Port Connection, Metric
DoD Adopted |
| 201 | SAE MA2110A-1988 | 1988-02-01 | English | PORT, RING LOCKED DESIGN STANDARD DIMENSIONS FOR |
| 202 | SAE ARP841A-1988 | 1988-01-18(R 1994) | English | Leads, Flexible, Shielded, High Energy Ignition |
| 203 | SAE ARP1674A-1988 | 1988-01-01(R 2014) | English | Automated Manufacture of Continuous Multi-Ply Carbon Fiber/Epoxy Resin Impregnated Broadgoods |
| 204 | SAE MA3381-1988 | 1988-01-01(R 2013) | English | STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 - 8 X 1(DoD Adopted) |
| 205 | SAE ARP618A-1988 | 1988-01-01(R 2013) | English | Boss Fittings, Metal Seal, Fluid Systems: General Requirements For |
| 206 | SAE MA3379-1988 | 1988-01-01(R 2013) | English | STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 6 X 1(DoD Adopted) |
| 207 | SAE AS1959-1988 | 1988-01-01(R 2012) | English | Insert - Ring Locked, Fluid Connection Port Design, Installation and Removal of |
| 208 | SAE AS1958-1988 | 1988-01-01(R 2012) | English | PORT-FLUID CONNECTION, RING LOCKED INSERT, STANDARD DIMENSIONS FOR |
| 209 | SAE AS1613A-1988 | 1988-01-01(R 2010) | English | IMAGE QUALITY INDICATOR Radiographic |
| 210 | SAE ARP4153-1988 | 1988-01-01(R 2008) | English | Human Interface Criteria for Collision Avoidance Systems in Transport Aircraft |
| 211 | SAE AIR4243-1988 | 1988-01-01(R 2008) | English | Landing Area/Landing Gear Compatibility - A Brief History of SAE/Corps of Engineers Cooperation |
| 212 | SAE ARP618A-1988 | 1988-01-01(R 2007) | English | Boss Fittings, Metal Seal, Fluid Systems: General Requirements For |
| 213 | SAE J899-1988 | 1988-01-01(R 2007) | English | Operator麓s Seat Dimensions for Off-Road Self-Propelled Work Machines
DoD Adopted |
| 214 | SAE J1109-1988 | 1988-01-01(R 2007) | English | Component Nomenclature - Articulated Log Skidder, Rubber-Tired |
| 215 | SAE ARP4055-1988 | 1988-01-01(R 2007) | English | Ground-Plane Microphone Configuration for Propeller-Driven Light- Aircraft Noise Measurement |
| 216 | SAE MA3381-1988 | 1988-01-01(R 2006) | English | Stud, Straight - 2.5 Dia Engagement, A286, MJ Metric 8 x 1 - 8 x 1
DoD Adopted |
| 217 | SAE ARP1674A-1988 | 1988-01-01(R 2005) | English | Automated Manufacture of Continuous Multi-Ply Carbon Fiber/Epoxy Resin Impregnated Broadgoods |
| 218 | SAE ARP908C-1988 | 1988-01-01(R 2005) | English | Torque Requirements, Installation and Qualification Test, Hose and Tube Fitting
DoD Adopted |
| 219 | SAE AMS3903/6A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 181, 80 (180)
DoD Adopted |
| 220 | SAE AMS3903/7A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 281, 80 (180)
DoD Adopted |
| 221 | SAE AMS3903/8A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 328, 80 (180)
DoD Adopted |
| 222 | SAE AMS3903/4A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 328, 175 (350)
DoD Adopted |
| 223 | SAE AMS3903/3A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 281, 175 (350)
DoD Adopted |
| 224 | SAE AMS3903/2A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 181, 175 (350)
DoD Adopted |
| 225 | SAE AMS3903/1A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 120, 175 (350)
DoD Adopted |
| 226 | SAE AMS3903/5A-1988 | 1988-01-01(R 2005) | English | Cloth, Organic Fiber, High Modulus Epoxy Resin Impregnated OC Style 120, 80 (180)
DoD Adopted |
| 227 | SAE MA3383-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 5 X 0.8
DoD Adopted |
| 228 | SAE MA3379-1988 | 1988-01-01(R 2004) | English | STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 6 X 1
DoD Adopted |
| 229 | SAE MA2006-1988 | 1988-01-01(R 2004) | English | Hydraulic Tubing - Qualification Test Requirements |
| 230 | SAE MA3388-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 6 X 1 - 5 X 0.8
DoD Adopted |
| 231 | SAE MA3387-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 - 10 X 1.25
DoD Adopted |
| 232 | SAE MA3386-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 8 X 1
DoD Adopted |
| 233 | SAE MA3385-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 - 7 X 1
DoD Adopted |
| 234 | SAE MA3384-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 1.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 6 X 1
DoD Adopted |
| 235 | SAE MA3382-1988 | 1988-01-01(R 2004) | English | STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 10 X 1.25
DoD Adopted |
| 236 | SAE MA3380-1988 | 1988-01-01(R 2004) | English | STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 7 X 1
DoD Adopted |
| 237 | SAE MA3380-1988 | 1988-01-01(R 2004) | English | STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 7 X 1(DoD Adopted) |
| 238 | SAE AS1959-1988 | 1988-01-01(R 2004) | English | Insert - Ring Locked, Fluid Connection Port Design, Installation and Removal of |
| 239 | SAE MA3389-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 6 X 1
DoD Adopted |
| 240 | SAE MA3391-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 8 X 1
DoD Adopted |
| 241 | SAE MA3392-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 12 X 1.25 - 10 X 1.25
DoD Adopted |
| 242 | SAE AS1958-1988 | 1988-01-01(R 2004) | English | PORT-FLUID CONNECTION, RING LOCKED INSERT, STANDARD DIMENSIONS FOR |
| 243 | SAE MA3390-1988 | 1988-01-01(R 2004) | English | STUD, STEPPED - 2.0 DIA ENGAGEMENT, A286, MJ METRIC 8 X 1 - 7 X 1
DoD Adopted |
| 244 | SAE AMS3370A-1988 | 1988-01-01(R 2001) | English | Silicone Resin, Elastomeric, Transparent Room Temperature Cure |
| 245 | SAE AMS3372A-1988 | 1988-01-01(R 2001) | English | Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure |
| 246 | SAE AMS3368A-1988 | 1988-01-01(R 2001) | English | Silicone Resin, Elastomeric, Transparent Elevated Temperature Cure |
| 247 | SAE AMS1640B-1988 | 1988-01-01(R 2000) | English | Corrosion Removing Compound for Aircraft Surfaces
DoD Adopted | ANSI Approved |
| 248 | SAE AMS3664B-1988 | 1988-01-01(R 1994) | English | Cloth, Glass, Vinyl Coated
ANSI Approved |
| 249 | SAE AMS3722A-1988 | 1988-01-01(R 1994) | English | Paper Honeycomb 125 lb (55 kg) Paper
DoD Adopted | ANSI Approved |
| 250 | SAE AS8045-1988 | 1988-01-01(R 1993) | English | Minimum Performance Standard for Underwater Locating Devices (Acoustic) (Self- Powered)
ANSI Approved |
| 251 | SAE AMS7846A-1988 | 1988-01-01(R 1993) | English | Tantalum Alloy Bars and Rods 90Ta - 10W Annealed - UNS R05255;:2006 |
| 252 | SAE ARP1964-1988 | 1988-01-01(R 1993) | English | Measurement of Rotocraft Interior Sound Pressure Levels
ANSI Approved |
| 253 | SAE J1926-1988 | 1988-01-01 | English | Specification for Straight Thread O-Ring Boss Port
DoD Adopted |
| 254 | SAE AE-13-1988 | 1988-01-01 | English | Gasket and Joint Design Manual for Engine and Transmission Systems First Edition |
| 255 | SAE J1914-1988 | 1988-01-01 | English | Dynamic Ozone Test Procedure - Hydraulic Brake Hose, Recommended Practice |
| 256 | SAE J468-1988 | 1988-01-01 | English | Zinc Alloy Ingot and Die Casting Compositions
ANSI Approved |
| 257 | SAE AE-5-1988 | 1988-01-01 | English | Design Practices - Passenger Car Automatic Transmissions Revised Second Edition |
| 258 | SAE AE-10-1988 | 1988-01-01 | English | Fatigue Design Handbook Second Edition - Second Edition; 1988; OUT OF PRINT |
| 259 | SAE J1157-1988 | 1988-01-01 | English | MEASUREMENT PROCEDURE FOR EVALUATION OF FULL - FLO |
| 260 | SAE J1833-1988 | 1988-01-01 | English | Hot Impulse Test for Hydraulic Brake Hose Assemblies, Recommended Practice |
| 261 | SAE CMB 6-2-1988 | 1988-01-01 | English | Configuration and Data Management In-House Training Plan - Formerly TechAmerica CMB 6-2 |
| 262 | SAE J910-1988 | 1988-01-01 | English | Hazard Warning Signal Switch, Standard
DoD Adopted | ANSI Approved |
| 263 | SAE J697-1988 | 1988-01-01 | English | Safety Chain of Full Trailers or Converter Dollies, Recommended Practice
DoD Adopted | ANSI Approved |
| 264 | SAE MA3382-1988 | 1988-01-01 | English | STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 10 X 1.25 - 10 X 1.25(DoD Adopted) |
| 265 | SAE J1155-1988 | 1988-01-01 | English | DISPLACEMENT OF PNEUMATIC SERVICE BRAKE ACTUATORS |
| 266 | SAE AS4159-1988 | 1988-01-01 | English | Specification for an Automated Interchange of Standards Data |
| 267 | SAE J1372-1988 | 1988-01-01 | English | Sound Power Determination - Earthmoving Machinery - Static Condition, Standard - WITHDRAWN - NO LONGER AVAILABLE
ANSI Approved |
| 268 | SAE EA 1128-1988 | 1988-01-01 | English | COLOR TOLERANCE SET - COLOR CHARTS FOR SAE J1128 |
| 269 | SAE J1544-1988 | 1988-01-01 | English | Revolutions per Mile and Static Loaded Radius for Off-Road Tires, Standard |
| 270 | SAE J2194-1987 | 1987-12-01(R 2009) | English | Roll-Over Protective Structures (ROPS) for Wheeled Agricultural Tractors |
| 271 | SAE MA3347-1987 | 1987-12-01(R 2006) | English | Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731 Metric
DoD Adopted |
| 272 | SAE MA3365-1987 | 1987-12-01(R 2006) | English | Bolt, Machine - Hex Head, Drilled, Full Shank, Long Thread, AMS 5731, Metric
DoD Adopted |
| 273 | SAE MA3368-1987 | 1987-12-01(R 2006) | English | Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, Drilled, AMS5662 Metric
DoD Adopted |
| 274 | SAE J1418-1987 | 1987-12-01(R 2002) | English | Fuel Injection Pumps - High Pressure Pipes (Tubing) for Testing |
| 275 | SAE J925-1987 | 1987-12-01(R 1993) | English | Minimum Service Access Dimensions for Off-Road Machines - WITHDRAWN - NO LONGER AVAILABLE
DoD Adopted | ANSI Approved |
| 276 | SAE MA3347-1987 | 1987-12-01 | English | Bolt, Machine-Hex Head-Full Shank, Long Thread, AMS 5731 Metric |
| 277 | SAE MA3368-1987 | 1987-12-01 | English | Bolt, Machine-Spline Extended Washer, PD Shank, Long Thread, Drilled, AMS5662 Metric |
| 278 | SAE J1250-1987 | 1987-12-01 | English | In-Service Brake Performance Test Procedure - Vehicles over 4500 kg (10 000 lb), Recommended Practice
ANSI Approved |
| 279 | SAE AS8047-1987 | 1987-11-01(R 2011) | English | Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies |
| 280 | SAE AS8047-1987 | 1987-11-01(R 2002) | English | Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies |
| 281 | SAE ARP1202A-1987 | 1987-11-01(R 1992) | English | Balancing Machines, Dynamic, Ball Type Slave Bearings for Rotor Support |
| 282 | SAE AS8047-1987 | 1987-11-01 | English | Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies |
| 283 | SAE AS8047-1987 | 1987-11-01 | English | Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies |
| 284 | SAE AMS3730-1987 | 1987-10-27 | English | POTTING COMPOUND, FOAMED EPOXY TYPE AMINE HARDENED |
| 285 | SAE AMS3147-1987 | 1987-10-01 | English | FLUX, BRAZING HIGH TEMPERATURE |
| 286 | SAE J1816-1987 | 1987-10-01 | English | Performance Levels and Methods of Measurement of Electromagnetic Radiation from Vehicles and Devices Narrowband, 10 kHz to 1000 MHz, Recommended Practice |
| 287 | SAE J1816-1987 | 1987-10-01 | English | Performance Levels and Methods of Measurement of Electromagnetic Radiation from Vehicles and Devices Narrowband, 10 kHz to 1000 MHz, Recommended Practice
ANSI Approved |
| 288 | SAE AMS5751E-1987 | 1987-10-01 | English | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted - UNS N07500; Reaffirmed Noncurrent April 2006 |
| 289 | SAE MA4029-1987 | 1987-09-01(R 2012) | English | RING, RETAINING - INTERNAL, BEVELED, TAPERED, TYPE II, CLASS 1 AMS 5520, METRIC |
| 290 | SAE MA4020-1987 | 1987-09-01(R 2012) | English | RING, RETAINING - EXTERNAL, TAPERED, TYPE I, CLASS 2 AMS 5520, METRIC |
| 291 | SAE MA4019-1987 | 1987-09-01(R 2012) | English | PIN, STRAIGHT, HEADLESS AMS 5732, METRIC |
| 292 | SAE MA4030-1987 | 1987-09-01(R 2012) | English | RING, RETAINING - EXTERNAL, REINFORCED E-RING, TYPE I CLASS 3 AMS 5520, METRIC |
| 293 | SAE MA4021-1987 | 1987-09-01(R 2012) | English | RING, RETAINING - INTERNAL, TAPERED, TYPE I, CLASS 1 AMS 5520, METRIC |
| 294 | SAE MA4018-1987 | 1987-09-01(R 2012) | English | PIN, STRAIGHT, HEADLESS AMS 5688, METRIC |
| 295 | SAE AS3436-1987 | 1987-09-01(R 2012) | English | SPACER, SLEEVE - FOR .250 INCH BOLT, AMS4901 OR AMS4921 |
| 296 | SAE AS3435-1987 | 1987-09-01(R 2012) | English | SPACER, SLEEVE - FOR .190 INCH BOLT, AMS4901 OR AMS4921 |
| 297 | SAE MA4017-1987 | 1987-09-01(R 2012) | English | RING, RETAINING - INTERNAL, SPIRAL WOUND, HEAVY & MEDIUM DUTY CRES, METRIC |
| 298 | SAE MA4016-1987 | 1987-09-01(R 2012) | English | RING, RETAINING - EXTERNAL, SPIRAL WOUND, HEAVY & MEDIUM DUTY CRES, METRIC |
| 299 | SAE MA4016-1987 | 1987-09-01(R 2006) | English | Ring, Retaining - External, Spiral Wound, Heavy & Medium Duty CRES, Metric
DoD Adopted |
| 300 | SAE MA4029-1987 | 1987-09-01(R 2006) | English | Ring, Retaining - Internal, Beveled, Tapered, Type II Class 1 AMS 5520, Metric
DoD Adopted |
| 301 | SAE MA4021-1987 | 1987-09-01(R 2006) | English | Ring, Retaining - Internal, Tapered, Type I, Class 1 AMS 5520, Metric
DoD Adopted |
| 302 | SAE MA4020-1987 | 1987-09-01(R 2006) | English | Ring, Retaining - External, Tapered, Type I, Class 2 AMS 5520, Metric
DoD Adopted |
| 303 | SAE MA4019-1987 | 1987-09-01(R 2006) | English | Pin, Straight, Headless AMS 5732, Metric
DoD Adopted |
| 304 | SAE AS3436-1987 | 1987-09-01(R 2006) | English | Spacer, Sleeve - for .250 Inch Bolt, AMS4901 or AMS4921
DoD Adopted |
| 305 | SAE MA4018-1987 | 1987-09-01(R 2006) | English | Pin, Straight, Headless AMS 5688, Metric
DoD Adopted |
| 306 | SAE AS3435-1987 | 1987-09-01(R 2006) | English | Spacer, Sleeve - for .190 Inch Bolt, AMS4901 or AMS4921
DoD Adopted |
| 307 | SAE MA4030-1987 | 1987-09-01(R 2006) | English | Ring, Retaining - External, Reinforced E-Ring, Type I Class 3 AMS 5520, Metric
DoD Adopted |
| 308 | SAE MA4017-1987 | 1987-09-01(R 2006) | English | Ring, Retaining - Internal, Spiral Wound, Heavy & Medium Duty CRES, Metric
DoD Adopted |
| 309 | SAE AIR4003-1987 | 1987-09-01(R 1991) | English | Report on Aircraft Engine Containment |
| 310 | SAE J1043-1987 | 1987-09-01 | English | Performance Criteria for Falling Object Protective Structure (FOPS) for Industrial Machines, Standard |
| 311 | SAE AS3435-1987 | 1987-09-01 | English | SPACER, SLEEVE - FOR .190 INCH BOLT, AMS4901 OR AMS4921 |
| 312 | SAE J1852-1987 | 1987-09-01 | English | Properties of Galvanized Low Carbon Sheet Steels and Their Relation to Formability, Information Report |
| 313 | SAE MA3287-1987 | 1987-08-01(R 2012) | English | BOLT, MACHINE-SPLINE EXTENDED WASHER, PD SHANK LONG THREAD, AMS5731, METRIC |
| 314 | SAE MA3437-1987 | 1987-08-01(R 2012) | English | SPACER, SLEEVE - FOR 5MM BOLT, AMS4901 OR AMS4921, METRIC |
| 315 | SAE MA3438-1987 | 1987-08-01(R 2012) | English | SPACER, SLEEVE - FOR 6MM BOLT, AMS4901 OR AMS4921, METRIC |
| 316 | SAE MA3438-1987 | 1987-08-01(R 2006) | English | Spacer, Sleeve - for 6mm Bolt, AMS4901 or AMS4921, Metric
DoD Adopted |
| 317 | SAE MA3287-1987 | 1987-08-01(R 2006) | English | Bolt, Machine-Spline Extended Washer, PD Shank Long Thread, AMS5731, Metric
DoD Adopted |
| 318 | SAE MA3437-1987 | 1987-08-01(R 2006) | English | Spacer, Sleeve - for 5mm Bolt, AMS4901 or AMS4921, Metric
DoD Adopted |
| 319 | SAE AIR1602-1987 | 1987-08-01(R 1991) | English | Starter System Optimization Start Analysis, Turbine Engine - Electric, Battery Power |
| 320 | SAE J1813-1987 | 1987-08-01 | English | A VEHICLE NETWORK PROTOCOL WITH A FAULT TOLERANT MULTIPLEX SIGNAL BUS |
| 321 | SAE HIR1559A-1987 | 1987-08-01 | English | BLEED - AIR PNEUMATE SYSTEMS FOR GAS TURBINE EQUIP |
| 322 | SAE J688-1987 | 1987-08-01 | English | Truck Ability Prediction Procedure, Recommended Practice
DoD Adopted | ANSI Approved |
| 323 | SAE J548-1987 | 1987-08-01 | English | Spark Plugs |
| 324 | SAE J1882-1987 | 1987-08-01 | English | METHOD FOR EVALUATING THE CLEAVAGE STRENGTH OF STRUCTURALLY BONDED FIBERGLASS REINFORCED PLASTIC (WEDGE TEST) |
| 325 | SAE J554-1987 | 1987-08-01 | English | Electric Fuses (Cartridge Type) |
| 326 | SAE MA3351-1987 | 1987-07-01(R 2018) | English | NUT, SPLINE DRIVE - EXTENDED WASHER, CUPWASHER LOCK, UNS S66286, SILVER PLATE, MJ THREAD, METRIC |
| 327 | SAE MA3434-1987 | 1987-07-01(R 2012) | English | PACKING, PREFORMED - O-RING SEAL, AMS 7273, METRIC |
| 328 | SAE MA1568-1987 | 1987-07-01(R 2012) | English | Nut, Self Locking - UNS S66286, 425°C & 650°C, 1100 MPa, MJ Thread, Procurement Specification For, Metric |
| 329 | SAE MA1784-1987 | 1987-07-01(R 2012) | English | Spacers and Washers, Procurement Specification For, Metric |
| 330 | SAE MA2010-1987 | 1987-07-01(R 2012) | English | Packing, Preformed - O-Ring Seal Standard Sizes & Size Codes, Metric |
| 331 | SAE MA3266-1987 | 1987-07-01(R 2012) | English | NUT, SELF-LOCKING – SPLINE DRIVE, EXTENDED WASHER UNS S66286, SILVER PLATE, MJ THREAD, METRIC |
| 332 | SAE AMS5373D-1987 | 1987-07-01(R 2006) | English | Alloy Castings, Sand, Corrosion and Heat Resistant 16Co-29Cr-4.5W as Cast - UNS R30006 |
| 333 | SAE MA3429-1987 | 1987-07-01(R 2006) | English | Nut, Self Locking, Spline Drive, Extended Washer, UNS N07001, Silver Plate, MJ Thread, Metric - UNS N07001
DoD Adopted |
| 334 | SAE MA3398-1987 | 1987-07-01(R 2006) | English | Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS 5731, Metric
DoD Adopted |
| 335 | SAE MA3266-1987 | 1987-07-01(R 2006) | English | Nut, Self Locking - Spline Drive, Extended Washer UNS S66286, Silver Plate, MJ Thread, Metric - UNS S66286
DoD Adopted |
| 336 | SAE MA3434-1987 | 1987-07-01(R 2006) | English | Packing, Preformed - O-Ring Seal, AMS 7273, Metric
DoD Adopted |
| 337 | SAE MA3343-1987 | 1987-07-01(R 2006) | English | Bolt, Machine - Spline Drive Extended Washer, Full Shank, Long Thread, AMS 5662, Metric
DoD Adopted |
| 338 | SAE MA3366-1987 | 1987-07-01(R 2006) | English | Bolt, Machine-Spline Drive, Extended Washer Drilled Head, Full Shank, Long Thread, AMS 5662, Metric
DoD Adopted |
| 339 | SAE MA2010-1987 | 1987-07-01(R 2006) | English | Packing, Preformed - O-Ring Seal Standard Sizes & Size Codes, Metric
DoD Adopted |
| 340 | SAE MA1568-1987 | 1987-07-01(R 2006) | English | Nut, Self Locking - UNS S66286, 425 Degrees C & 650 Degrees C, 1100 MPa, MJ Thread, Procurement Specification for, Metric
DoD Adopted |
| 341 | SAE MA1784-1987 | 1987-07-01(R 2006) | English | Spacers and Washers, Procurement Specification for, Metric
DoD Adopted |
| 342 | SAE MA3351-1987 | 1987-07-01(R 2004) | English | NUT, SPLINE DRIVE - EXTENDED WASHER, CUPWASHER LOCK, UNS S66286, SILVER PLATE, MJ THREAD, METRIC
DoD Adopted |
| 343 | SAE MA3351-1987 | 1987-07-01(R 2004) | English | NUT, SPLINE DRIVE - EXTENDED WASHER, CUPWASHER LOCK, UNS S66286, SILVER PLATE, MJ THREAD, METRIC(DoD Adopted) |
| 344 | SAE AMS3373/2A-1987 | 1987-07-01(R 2001) | English | Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure |
| 345 | SAE AMS3373/1A-1987 | 1987-07-01(R 2001) | English | Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure |
| 346 | SAE AMS3813/1A-1987 | 1987-07-01(R 1998) | English | Rope, Aramid Fiber, Jacketed Cabled Strand, Extruded Jacket |
| 347 | SAE AMS3813/2A-1987 | 1987-07-01(R 1998) | English | Rope, Aramid Fiber, Jacketed Parallel Strand, Extruded Jacket
DoD Adopted | ANSI Approved |
| 348 | SAE AMS3813/3A-1987 | 1987-07-01(R 1998) | English | Rope, Aramid Fiber, Jacketed Parallel Yarn, Braided Jacket
DoD Adopted | ANSI Approved |
| 349 | SAE J1141-1987 | 1987-07-01 | English | Air Cleaner Elements, Information Report |
| 350 | SAE MA2010-1987 | 1987-07-01 | English | Packing, Preformed - O-Ring Seal Standard Sizes & Size Codes, Metric |
| 351 | SAE MA3398-1987 | 1987-07-01 | English | Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS 5731, Metric |
| 352 | SAE AS4076-1987 | 1987-06-01(R 2013) | English | Contractile Strain Ratio Testing of Titanium Hydraulic Tubing |
| 353 | SAE J1305-1987 | 1987-06-01(R 2007) | English | Two-Block Warning and Limit Systems in Lifting Crane Service |
| 354 | SAE AS4076-1987 | 1987-06-01(R 2007) | English | Contractile Strain Ratio Testing of Titanium Hydraulic Tubing |
| 355 | SAE MA3341-1987 | 1987-06-01(R 2006) | English | Bolt, Machine-Spline Extended Washer, Full Shank, Long Thread, AMS 5731 Metric
DoD Adopted |
| 356 | SAE MA3342-1987 | 1987-06-01(R 2006) | English | Bolt, Machine-Spline Extended Washer, Full Shank, Drilled, Long Thread, AMS5731, Metric
DoD Adopted |
| 357 | SAE MA3341-1987 | 1987-06-01 | English | BOLT, MACHINE-SPLINE EXTENDED WASHER, FULL SHANK, LONG THREAD, AMS5731, METRIC |
| 358 | SAE J1526-1987 | 1987-06-01 | English | Joint TMC/SAE Fuel Consumption In-Service Test Procedure Type III, Recommended Practice |
| 359 | SAE J1336-1987 | 1987-06-01 | English | Hydraulic Cylinder Leakage Test, Recommended Practice |
| 360 | SAE J1830-1987 | 1987-05-01(R 2013) | English | Size Classification and Characteristics of Ceramic Shot for Peening |
| 361 | SAE MA3349-1987 | 1987-05-01(R 2012) | English | NUT, SELF LOCKING - REDUCED HEX DRIVE, UNS S66286, SILVER PLATE, MJ THREAD, METRIC |
| 362 | SAE MA3349-1987 | 1987-05-01(R 2007) | English | Nut, Self Locking - Reduced Hex Drive, UNS S66286, Silver Plate, MJ Thread, Metric
DoD Adopted |
| 363 | SAE J818-1987 | 1987-05-01(R 2007) | English | Rated Operating Load for Loaders, Standard
DoD Adopted |
| 364 | SAE J331-1987 | 1987-05-01(R 2000) | English | Sound Levels for Motorcycles
ANSI Approved |
| 365 | SAE J598-1987 | 1987-05-01(R 1994) | English | Sealed Lighting Units for Construction, Industrial, and Forest Machinery
DoD Adopted | ANSI Approved |
| 366 | SAE J1851-1987 | 1987-05-01 | English | Induction Cure Test for Metal Bonding Adhesives, Recommended Practice
ANSI Approved |
| 367 | SAE J1571-1987 | 1987-05-01 | English | INSPECTION OF ENERGY ABSORBING BUMPER MOUNTS |
| 368 | SAE J1827-1987 | 1987-05-01 | English | UNIBODY WELD QUALITY TESTING |
| 369 | SAE J153-1987 | 1987-05-01 | English | Operator Precautions |
| 370 | SAE MA1586A-1987 | 1987-04-01(R 2013) | English | Wrench Configuration, 12 Spline Drive, Metric |
| 371 | SAE AS1865-1987 | 1987-04-01(R 2013) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO 90° |
| 372 | SAE AS1863-1987 | 1987-04-01(R 2013) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO STRAIGHT |
| 373 | SAE AS1867-1987 | 1987-04-01(R 2013) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45° TO 90° |
| 374 | SAE AS1866-1987 | 1987-04-01(R 2013) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45° TO 45° |
| 375 | SAE AS1864-1987 | 1987-04-01(R 2013) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO 45° |
| 376 | SAE AS1868-1987 | 1987-04-01(R 2013) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 90° TO 90° |
| 377 | SAE MA2532-1987 | 1987-04-01(R 2012) | English | ADAPTER – PORT TO TUBE, 60 DEG CONE COUPLING, AMS 5639, MJ THREAD, METRIC |
| 378 | SAE J1286-1987 | 1987-04-01(R 2009) | English | Thrust Test Device |
| 379 | SAE AS1866-1987 | 1987-04-01(R 2007) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45掳 TO 45掳 |
| 380 | SAE AS1867-1987 | 1987-04-01(R 2007) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, 45掳 TO 90掳 |
| 381 | SAE AS1863-1987 | 1987-04-01(R 2007) | English | Hose Assembly, Rubber, Flareless, Field Attachable Fitting, Straight to Straight |
| 382 | SAE AS1865-1987 | 1987-04-01(R 2007) | English | Hose Assembly, Rubber, Flareless, Field Attachable Fitting, Straight to 90 Degree |
| 383 | SAE AS1868-1987 | 1987-04-01(R 2007) | English | Hose Assembly, Rubber, Flareless, Field Attachable Fitting, 90 Degrees to 90 Degrees |
| 384 | SAE AS1864-1987 | 1987-04-01(R 2007) | English | HOSE ASSEMBLY, RUBBER, FLARELESS, FIELD ATTACHABLE FITTING, STRAIGHT TO 45掳 |
| 385 | SAE AMS5351F-1987 | 1987-04-01(R 2006) | English | Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13Cr Normalized and Tempered
DoD Adopted |
| 386 | SAE MA2532-1987 | 1987-04-01(R 2006) | English | Adapter - Port to Tube, 60 Deg Cone Coupling, AMS 5639, MJ Thread, Metric |
| 387 | SAE J1864-1987 | 1987-04-01(R 1996) | English | Method for Evaluating Material Separation in Automotive Sealers under Pressure in Static Conditions, Recommended Practice |
| 388 | SAE AMS3651D-1987 | 1987-04-01(R 1994) | English | POLYTETRAFLUOROETHYLENE |
| 389 | SAE J1600-1987 | 1987-04-01 | English | Method for Evaluating the Adhesion Characteristics of Automotive Sealers, Recommended Practice |
| 390 | SAE MA2123-1987 | 1987-04-01 | English | HOSE ASSEMBLY, CONVOLUTED, NONMETALLIC, TFE, FLARELESS, 45° TO 45° |
| 391 | SAE MA1586A-1987 | 1987-04-01 | English | Wrench Configuration, 12 Spline Drive, Metric |
| 392 | SAE J1800-1987 | 1987-04-01 | English | Method for Evaluating the Paintable Characteristics of Automotive Sealers, Recommended Practice |
| 393 | SAE J1124-1987 | 1987-03-01(R 2018) | English | Glossary of Terms Related to Fluid Filters and Filter Testing |
| 394 | SAE J990-1987 | 1987-03-01(R 2014) | English | Nomenclature—Industrial and Agricultural Mowers |
| 395 | SAE J1521-1987 | 1987-03-01(R 2014) | English | Truck Driver Shin-Knee Position for Clutch and Accelerator |
| 396 | SAE J1124-1987 | 1987-03-01(R 2012) | English | Glossary of Terms Related to Fluid Filters and Filter Testing |
| 397 | SAE MA3352-1987 | 1987-03-01(R 2012) | English | PACKING, PREFORMED - O-RING SEAL, AMS 7276, METRIC |
| 398 | SAE MA3442-1987 | 1987-03-01(R 2012) | English | PACKING, PREFORMED - O-RING SEAL, AMS 7267, METRIC |
| 399 | SAE J990-1987 | 1987-03-01(R 2009) | English | Nomenclature鈥擨ndustrial and Agricultural Mowers |
| 400 | SAE J1001-1987 | 1987-03-01(R 2009) | English | Industrial Flail Mowers and Power Rakes |
| 401 | SAE MA3442-1987 | 1987-03-01(R 2006) | English | Packing, Preformed - O-Ring Seal, AMS 7267, Metric
DoD Adopted |
| 402 | SAE MA3352-1987 | 1987-03-01(R 2006) | English | Packing, Preformed - O-Ring Seal, AMS 7276, Metric
DoD Adopted |
| 403 | SAE J1521-1987 | 1987-03-01 | English | Truck Driver Shin-Knee Position for Clutch and Accelerator |
| 404 | SAE J1124-1987 | 1987-03-01 | English | Glossary of Terms Related to Fluid Filters and Filter Testing, Recommended Practice
ANSI Approved |
| 405 | SAE MA3369-1987 | 1987-02-01(R 2006) | English | Bolt, Machine-Hex Head, Drilled, PD Shank, Long Thread, AMS 5662, Metric
DoD Adopted |
| 406 | SAE MA3338-1987 | 1987-02-01(R 2004) | English | BOLT, MACHINE-HEX HEAD, PD SHANK, LONG THREAD, AMS 5662, METRIC
DoD Adopted |
| 407 | SAE J366-1987 | 1987-02-01(R 2001) | English | Exterior Sound Level for Heavy Trucks and Buses
DoD Adopted | ANSI Approved |
| 408 | SAE J193-1987 | 1987-02-01(R 1996) | English | Ball Stud and Socket Assembly - Test Procedures |
| 409 | SAE J363-1987 | 1987-02-01(R 1994) | English | Filter-Base Mounting |
| 410 | SAE J717-1987 | 1987-02-01(R 1993) | English | Auxiliary Power Take-Off Drives for Agricultural Tractors
ANSI Approved |
| 411 | SAE MA2079-1987 | 1987-02-01(R 1991)(R 1996) | English | Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric |
| 412 | SAE MA2079-1987 | 1987-02-01 | English | Hose Assembly, Convoluted Polytetrafluoroethylene, High Temperature, Medium Pressure, Aircraft, Metric |
| 413 | SAE AMS4000F-1987 | 1987-01-01(S 2014) | English | ALUMINUM SHEET AND PLATE (1060-0) - UNS A91060(DoD Adopted) |
| 414 | SAE AMS4000E-1987 | 1987-01-01(R 2008) | English | ALUMINUM SHEET AND PLATE (1060-0) - UNS A91060
DoD Adopted |
| 415 | SAE AS8044-1987 | 1987-01-01(R 2007) | English | Takeoff Performance Monitor (TOPM) System, Airplane, Minimum Performance Standard for |
| 416 | SAE J1490-1987 | 1987-01-01(R 1999) | English | Measurement and Presentation of Truck Ride Vibrations, Recommended Practice
ANSI Approved |
| 417 | SAE ARP1870-1987 | 1987-01-01(R 1999) | English | Aerospace Systems Electrical Bonding and Grounding for Electromagnetic Compatibility and Safety |
| 418 | SAE MA2125-1987 | 1987-01-01(R 1996) | English | Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, 90 Degrees to 90 Degrees
ANSI Approved |
| 419 | SAE J1863-1987 | 1987-01-01(R 1993) | English | Coach Joint Fracture Test, Recommended Practice |
| 420 | SAE MA1586A-1987 | 1987-01-01(R 1992) | English | Wrench Configuration, 12 Spline Drive, Metric
ANSI Approved |
| 421 | SAE AS28B-1987 | 1987-01-01(R 1992) | English | Spark Plugs, Aircraft Engine |
| 422 | SAE MA2122-1987 | 1987-01-01(R 1991)(R 1996) | English | Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, Straight to 90 Degrees
ANSI Approved |
| 423 | SAE MA2121-1987 | 1987-01-01(R 1991)(R 1996) | English | Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, Straight to 45 Degrees
ANSI Approved |
| 424 | SAE MA2120-1987 | 1987-01-01(R 1991)(R 1996) | English | Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, Straight to Straight
ANSI Approved |
| 425 | SAE MA2123-1987 | 1987-01-01(R 1991)(R 1996) | English | Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, 45 Degrees to 45 Degrees
ANSI Approved |
| 426 | SAE MA2124-1987 | 1987-01-01(R 1991)(R 1996) | English | Hose Assembly, Convoluted, Nonmetallic, TFE, Flareless, 45 Degrees to 90 Degrees
ANSI Approved |
| 427 | SAE ARP1307A-1987 | 1987-01-01(R 1991) | English | Measurement of Exterior Noise Produced by Aircraft Auxiliary Power Units (APUs) and Associated Equipment During Ground Operation
ANSI Approved |
| 428 | SAE J1056-1987 | 1987-01-01 | English | SERVICE PERFORMANCE REQUIREMENTS FOR VEHICULAR HAZARD WARNING FLASHERS |
| 429 | SAE J210-1987 | 1987-01-01 | English | WIRING IDENTIFICATION SYSTEM FOR INDUSTRIAL AND CONSTRUCTION EQUIPMENT |
| 430 | SAE AMS7878C-1987 | 1987-01-01 | English | Tungsten Carbide Powder Cobalt Coated |
| 431 | SAE J1507-1987 | 1987-01-01 | English | Anechoic Test Facility Radiated Susceptibility 20MHz to 18GHz Electromagnetic Field, Information Report; |
| 432 | SAE AMS5705E-1987 | 1987-01-01 | English | Steel, Corrosion and Heat Resistant, Bars and Forgings 2.5Si - 12.8Cr - 8.0Ni Annealed - UNS S63005 |
| 433 | SAE AMS2760A-1987 | 1987-01-01 | English | HEAT TREATMENT - CARBON, LOW - ALLOY AND SPECIALIT |
| 434 | SAE J498B-1987 | 1987-01-01 | English | INVOLUTE SPLINES, SERRATIONS, AND INSPECTION |
| 435 | SAE J1055-1987 | 1987-01-01 | English | SERVICE PERFORMANCE REQUIREMENTS FOR SIGNAL FLASHER |
| 436 | SAE J491-1987 | 1987-01-01 | English | Steering Ball Studs and Socket Assemblies
ANSI Approved |
| 437 | SAE J1830-1987 | 1987-01-01 | English | Size Classification and Characteristics of Ceramic Shot for Peening, Recommended Practice
ANSI Approved |
| 438 | SAE J173-1987 | 1987-01-01 | English | SPECIFICATION DEFINITIONS - DOZERS |
| 439 | SAE J1113-1987 | 1987-01-01 | English | Electromagnetic Susceptibility Measurement Procedures for Vehicle Components (Except Aircraft) |
| 440 | SAE ARP4109-1987 | 1987-01-01 | English | AIRBORNE WINDSHEAR SYSTEMS |
| 441 | SAE AMS3852A-1987 | 1987-01-01 | English | FLAME RESISTANT PROPERTIES FOR AIRCRAFT MATERIALS |
| 442 | SAE AE-9-1987 | 1987-01-01 | English | Automotive Electronics Reliability Handbook - February 1987; ***To Purchase: Contact IHS at 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide*** No Longer Available |
| 443 | SAE J1129-1987 | 1987-01-01 | English | OPERATOR CAB ENVIRONMENT FOR HEATED, VENTILATED, |
| 444 | SAE AMS3855A-1987 | 1987-01-01 | English | FLAME RESISTANCE TREATMENT OF INTERIOR FABRICS |
| 445 | SAE J256B-1987 | 1987-01-01 | English | SERVICE PERFORMANCE REQUIREMENTS FOR MOTOR VEHICLE LIGHTING DEVICES AND COMPONENTS |
| 446 | SAE J242A-1987 | 1987-01-01 | English | METRIC THREAD FUEL INJECTION TUBING CONNECTIONS |
| 447 | SAE AMS3851A-1987 | 1987-01-01 | English | FIRE RESISTANT PROPERTIES FOR AIRCRAFT MATERIALS |
| 448 | SAE J847-1987 | 1987-01-01 | English | Trailer Tow Bar Eye and Pintle Hook/ Coupler Performance, Recommended Practice
DoD Adopted | ANSI Approved |
| 449 | SAE J233-1987 | 1987-01-01 | English | MARINE ENGINE MOUNTINGS DIRECT DRIVE TRANSMISSION |
| 450 | SAE AS943A-1986 | 1986-12-31 | English | Starter, Pneumatic, Aircraft Engine, General Specification for |
| 451 | SAE AIR1939-1986 | 1986-12-01 | English | Aircraft Engine Life Cycle Cost Guide |
| 452 | SAE J580-1986 | 1986-12-01 | English | Sealed Beam Headlamp Assemble |
| 453 | SAE HIR1622A-1986 | 1986-11-25(R 1992) | English | Noise Control in Fluid Power Systems of Marine Vehicles |
| 454 | SAE ARP1570-1986 | 1986-11-03 | English | FLIGHT MANAGEMENT COMPUTER SYSTEM |
| 455 | SAE AS1291A-1986 | 1986-11-01(R 2014) | English | SLEEVE, HOSE ASSEMBLY, CHAFE GUARD, TFE OR FEP(DoD Adopted) |
| 456 | SAE AS1291A-1986 | 1986-11-01(R 2007) | English | Sleeve, Hose Assembly, Chafe Guard, TFE or FEP
DoD Adopted |
| 457 | SAE J1307-1986 | 1986-11-01(R 2002) | English | Excavator and Backhoe Hand Signals |
| 458 | SAE ARP996A-1986 | 1986-11-01 | English | Cooling Data for Turbine Engines in Helicopters |
| 459 | SAE ARP268G-1986 | 1986-11-01 | English | LOCATON AND ACTUATION OF FLIGHT DECK CONTROLS FOR TRANSPORT AIRCRAFT |
| 460 | SAE AS8014-1986 | 1986-09-08(R 1991) | English | Minimum Performance Standard Stall Warning Equipment |
| 461 | SAE AIR1408A-1986 | 1986-09-02(R 2007) | English | Aerospace Fuel System Specifications and Standards |
| 462 | SAE MA2515-1986 | 1986-09-01(R 2012) | English | RING – BACK-UP, PORT CONNECTION, AMS 3660, METRIC |
| 463 | SAE MA2515-1986 | 1986-09-01(R 2006) | English | Ring - Back-Up, Port Connection, AMS 3660, Metric
DoD Adopted |
| 464 | SAE ARP1623A-1986 | 1986-09-01 | English | Guide for Preparing an ECS Computer Program User's Manual
ANSI Approved |
| 465 | SAE CMB 5-A-1986 | 1986-09-01 | English | Configuration Management Requirements for Subcontractors/Vendors - Formerly TechAmerica CMB 5-A |
| 466 | SAE J729-1986 | 1986-09-01 | English | Nomenclature and Specification Definitions - Dozers, Standard |
| 467 | SAE AS1960-1986 | 1986-08-01(R 2013) | English | Coupling Assembly, V-Band, Sheet Metal Flange, Pneumatic Tube |
| 468 | SAE MA2520-1986 | 1986-08-01(R 2012) | English | NUT - HEX, BACK-UP RING, PORT FITTING CONNECTOR, AMS 5639, MJ THREAD, METRIC |
| 469 | SAE MA2521-1986 | 1986-08-01(R 2012) | English | NUT – HEX, PORT FITTING CONNECTOR, AMS 5639, MJ THREAD, METRIC |
| 470 | SAE AS1960-1986 | 1986-08-01(R 2007) | English | Coupling Assembly, V-Band, Sheet Metal Flange, Pneumatic Tube
DoD Adopted |
| 471 | SAE MA2520-1986 | 1986-08-01(R 2006) | English | Nut - Hex, Back-Up Ring Port Fitting Connector, AMS 5639, MJ Thread, Metric
DoD Adopted |
| 472 | SAE MA2521-1986 | 1986-08-01(R 2006) | English | Nut, Plain, Hexagon, Port Fitting Connector, AMS 5639, MJ Thread, Metric
DoD Adopted |
| 473 | SAE J208-1986 | 1986-08-01(R 1993) | English | Safety for Agricultural Tractors |
| 474 | SAE HIR1528A-1986 | 1986-07-21 | English | SEAWATER SYSTEM DESIGN CRITERIA FOR ADVANCED MARIN |
| 475 | SAE J740-1986 | 1986-07-01(R 2006) | English | Countersunk Square Holes for Cutting Edges and End Bits
DoD Adopted |
| 476 | SAE AMS4188A-1986 | 1986-07-01 | English | Aluminum Alloy Welding Wire
DoD Adopted |
| 477 | SAE AMS3150C-1986 | 1986-07-01 | English | FLUID, HYDRAULIC FIRE RESISTANT |
| 478 | SAE AS1960/4-1986 | 1986-06-01(R 2013) | English | FLANGE END, DESIGN STANDARD |
| 479 | SAE AS1960/2-1986 | 1986-06-01(R 2013) | English | COUPLING, SHEET METAL, 40° V-BAND, QUICK RELEASE (OPTIONAL SAFETY) LATCH |
| 480 | SAE J738-1986 | 1986-06-01(R 2008) | English | Cutting Edge-Double Bevel Cross Sections, Standard |
| 481 | SAE AS1960/3-1986 | 1986-06-01(R 2007) | English | FLANGE, SHEET METAL |
| 482 | SAE AS1960/2-1986 | 1986-06-01(R 2007) | English | COUPLING, SHEET METAL, 40掳 V-BAND, QUICK RELEASE (OPTIONAL SAFETY) LATCH
DoD Adopted |
| 483 | SAE AS1960/4-1986 | 1986-06-01(R 2007) | English | Flange End, Design Standard
DoD Adopted |
| 484 | SAE AS1960/3-1986 | 1986-06-01(R 2007) | English | Flange, Sheet Metal
DoD Adopted |
| 485 | SAE J714-1986 | 1986-06-01(R 1993) | English | Wheel Mounting Elements for Industrial and Agricultural Disc Wheels, Recommended Practice |
| 486 | SAE J1159-1986 | 1986-06-01 | English | PREPARATION OF SAE TECHNICAL REPORTS - SURFACE VEHICLE AND MACHINES; STANDARDS, RECOMMENDED PRACTICES, INFORMATION REPORTS, RECOMMENDED PRACTICE |
| 487 | SAE J1146-1986 | 1986-06-01 | English | THE AUTOMATIC LUBRICANT PERFORMANCE AND SERVICE CLASSIFICATION MAINTENANCE PROCEDURE |
| 488 | SAE J424-1986 | 1986-06-01 | English | METHOD FOR DETERMINING BREAKAGE ALLOWANCES FOR SHEET STEEL |
| 489 | SAE J1447-1986 | 1986-05-01 | English | Fire-Resistant Fluid Usage in Hydraulic Systems of Off-Road Work Machines, Information Report |
| 490 | SAE J63-1986 | 1986-05-01 | English | Hole Placement on Dozer End Bits, Recommended Practice
ANSI Approved |
| 491 | SAE J1529-1986 | 1986-05-01 | English | Overlap Shear Test for Automotive Type Sealant for Stationary Glass Bonding, Recommended Practice |
| 492 | SAE J962-1986 | 1986-05-01 | English | Formed Tube Ends for Hose Connections, Standard
ANSI Approved |
| 493 | SAE J1078-1986 | 1986-04-01(R 2007) | English | A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms |
| 494 | SAE AMS4135M-1986 | 1986-04-01 | English | ALUMINUM ALLOY FORGINGS 4.5CU-0.85SI-0.80MN-0.50MG |
| 495 | SAE J895-1986 | 1986-04-01 | English | Five Conductor Electrical Connectors for Automotive Type Trailers, Recommended Practice
ANSI Approved |
| 496 | SAE AS1542A-1986 | 1986-03-01(R 2013) | English | HOSE, AIR DUCT, FLEXIBLE, HELICAL CONVOLUTED, SELF EXTINGUISHING |
| 497 | SAE AS1502A-1986 | 1986-03-01(R 2013) | English | HOSE, AIR DUCT, FLEXIBLE, HELICAL, METALLIC WIRE, SUPPORTED (EXPOSED), SELF EXTINGUISHING |
| 498 | SAE AS1541A-1986 | 1986-03-01(R 2013) | English | HOSE, AIR DUCT, FLEXIBLE, HELICAL CONVOLUTED, METALLIC WIRE SUPPORTED (COVERED), SELF EXTINGUISHING |
| 499 | SAE AS1505A-1986 | 1986-03-01(R 2013) | English | HOSE, AIR DUCT, FLEXIBLE, ANNULAR CONVOLUTED, SELF EXTINGUISHING |
| 500 | SAE AS1543A-1986 | 1986-03-01(R 2013) | English | HOSE, AIR DUCT, SEMIFLEXIBLE, SLEEVE SECTION UNREINFORCED, SELF EXTINGUISHING, NOMEX |
|