| Pos | standard Number | publication date | Language | Description |
| 1 | SAE AMS33931-1997 | 1997-01-01 | English | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, HYDRAULIC, -65 DEG. F TO 275 DEG. F |
| 2 | SAE MA2069A-1997 | 1997-01-01 | English | (R) FITTING, ELBOW, 90⁰, INTEGRAL WELD RING, 21,000 KPA, METRIC |
| 3 | SAE AS5131-1997 | 1997-01-01 | English | Tube End - Beaded, Design Standard |
| 4 | SAE AMS5626E-1997 | 1997-01-01 | English | Steel Bars and Forgings, Tool, High Speed 4.1Cr - 18W - 1.1V |
| 5 | SAE MA2071A-1997 | 1997-01-01 | English | (R) FITTING, CROSS, INTEGRAL WELD RING, 21,000 KPA, METRIC |
| 6 | SAE MA2064A-1997 | 1997-01-01 | English | (R) FITTING, SLEEVE, FLARELESS ACORN TO INTEGRAL WELD RING, 21,000 KPA, METRIC |
| 7 | SAE MA2070A-1997 | 1997-01-01 | English | (R) FITTING, TEE, INTEGRAL WELD RING, 21,000 KPA, METRIC |
| 8 | SAE HS-795-1997 | 1997-01-01 | English | Manual on Design and Application of Helical and Spiral Springs - 1997 Edition |
| 9 | SAE HS-5600-1997 | 1997-01-01 | English | SAE Agricultural Tractor and Related Standards Handbook - Out of Print; No Longer Available |
| 10 | SAE HS-3500-1997 | 1997-01-01 | English | Fuel, Oil, Emissions, and Coolant Systems Hose and Hose Clamp Standards Manual - ***To Purchase: Contact IHS at 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide*** |
| 11 | SAE AIR5080-1997 | 1997-01-01 | English | Integration of Probabilistic Methods into the Design Process |
| 12 | SAE 12207.1-1997 | 1997-01-01 | English | Industry Implementation of International Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard for information Technology - Software Life Cycle Processes - Life Cycle Data - April 1998 - Formerly TechAmerica 12207.1 |
| 13 | SAE J1619-1997 | 1997-01-01 | English | Single Tooth Gear Bending Fatigue Test |
| 14 | SAE AMS3344B-1997 | 1997-01-01 | English | Silicone Rubber 1800 psi 45-55 |
| 15 | SAE AS1578A-1996 | 1996-12-01(R 2013) | English | BELLMOUTH TUBE END, WELDING |
| 16 | SAE ARP1987/4-1996 | 1996-12-01(R 2013) | English | Titles, SAE Subcommittee G-3A Aerospace Coupling Documents, Selection of |
| 17 | SAE AS7210A-1996 | 1996-12-01(R 2012) | English | Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for |
| 18 | SAE AS7211A-1996 | 1996-12-01(R 2012) | English | Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification |
| 19 | SAE MA7211A-1996 | 1996-12-01(R 2012) | English | Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For |
| 20 | SAE USCAR-1-1996 | 1996-12-01(R 2012) | English | SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES - Revision 2; Revised 2005-03 |
| 21 | SAE AS791-1996 | 1996-12-01(R 2008) | English | Remote Servoed Air Data Instruments for Subsonic Aircraft |
| 22 | SAE ARP4791A-1996 | 1996-12-01(R 2008) | English | HUMAN ENGINEERING RECOMMENDATIONS FOR DATA LINK SYSTEMS |
| 23 | SAE ARP1987/4-1996 | 1996-12-01(R 2007) | English | Titles, SAE Subcommittee G-3A Aerospace Coupling Documents, Selection of |
| 24 | SAE AIR4989-1996 | 1996-12-01(R 2007) | English | DESIGN CONSIDERATIONS FOR ENCLOSED TURBOSHAFT ENGINE TEST CELLS |
| 25 | SAE AS7210A-1996 | 1996-12-01(R 2006) | English | Pins, Cotter, Steel, Corrosion Resistant UNS S30200 Procurement Specification for - UNS S30200; FSC 5315 |
| 26 | SAE MA7211A-1996 | 1996-12-01(R 2006) | English | Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification for - UNS S32100; FSC 5315 |
| 27 | SAE AS7211A-1996 | 1996-12-01(R 2006) | English | Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification - UNS S32100; FSC 5315 |
| 28 | SAE AIR5020-1996 | 1996-12-01(R 2004) | English | Time-Dependent In-Flight Thrust Determination |
| 29 | SAE AS1578A-1996 | 1996-12-01(R 1993) | English | Bellmouth Tube End, Welding |
| 30 | SAE J1794-1996 | 1996-12-01 | English | SAE Restraint Systems Effluent Test Procedure |
| 31 | SAE AS7211A-1996 | 1996-12-01 | English | Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100 Procurement Specification |
| 32 | SAE MA7211A-1996 | 1996-12-01 | English | Pins, Cotter, Steel, Corrosion and Heat Resistant UNS S32100, Metric Procurement Specification For |
| 33 | SAE AIR5145-1996 | 1996-12-01 | English | Directory of Databases Part I - Whole Body Anthropometry Surveys |
| 34 | SAE ARP4761-1996 | 1996-12-01 | English | Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment |
| 35 | SAE AIR46B-1996 | 1996-11-01(R 2014) | English | The Preparation and Use of Chromel-Alumel Thermocouples for Aircraft Gas Turbine Engines |
| 36 | SAE AMS2634B-1996 | 1996-11-01(R 2013) | English | Ultrasonic Inspection Thin Wall Metal Tubing |
| 37 | SAE AS3581-1996 | 1996-11-01(R 2012) | English | PACKING, PREFORMED – O-RING SEAL AMS7259 |
| 38 | SAE AS3472A-1996 | 1996-11-01(R 2012) | English | RING, RETAINING - INTERNAL, SPIRAL WOUND HEAVY AND MEDIUM DUTY, UNS S66286 |
| 39 | SAE ARP5089-1996 | 1996-11-01(R 2011) | English | COMPOSITE REPAIR NDT/NDI HANDBOOK |
| 40 | SAE ARP4150-1996 | 1996-11-01(R 2011) | English | PROCEDURE FOR INSPECTION OF INSERVICE AIRBORNE ACCUMULATORS FOR CORROSION AND DAMAGE |
| 41 | SAE AMS3084B-1996 | 1996-11-01(R 2010) | English | LUBRICANT, SOLID FILM Minimal Outgassing |
| 42 | SAE AS428-1996 | 1996-11-01(R 2008) | English | Exhaust Gas Temperature Instruments |
| 43 | SAE AS430-1996 | 1996-11-01(R 2008) | English | Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine) |
| 44 | SAE AS429-1996 | 1996-11-01(R 2008) | English | Rate of Climb (Vertical Speed) Indicator, Pressure Actuated (Turbine Powered Subsonic Aircraft) |
| 45 | SAE AS414B-1996 | 1996-11-01(R 2008) | English | TEMPERATURE INSTRUMENTS (TURBINE POWERED SUBSONIC AIRCRAFT) |
| 46 | SAE AS406-1996 | 1996-11-01(R 2008) | English | Flight Directors (Turbine-Powered Subsonic Aircraft) |
| 47 | SAE AS417A-1996 | 1996-11-01(R 2008) | English | Air Data Computers, MPS |
| 48 | SAE AS390-1996 | 1996-11-01(R 2008) | English | Pitot or Pitot-Static Pressure Tubes, Electrically Heated (Turbine Powered Sub-Sonic Aircraft) |
| 49 | SAE MA5076-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 掳C, BEAM SEAL, 45掳 TO 45掳, METRIC |
| 50 | SAE MA5066-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 KPA, 135 掳C, BEAM SEAL, STRAIGHT TO STRAIGHT, METRIC |
| 51 | SAE AMS2634B-1996 | 1996-11-01(R 2007) | English | Ultrasonic Inspection Thin Wall Metal Tubing
DoD Adopted |
| 52 | SAE MA5077-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 掳C, BEAM SEAL, 45掳 TO 90掳, METRIC |
| 53 | SAE MA5067-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 掳C, BEAM SEAL, STRAIGHT TO 45掳, METRIC |
| 54 | SAE MA5078-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 掳C, BEAM SEAL, 90掳 TO 90掳, METRIC |
| 55 | SAE MA5068-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 掳C, BEAM SEAL, STRAIGHT TO 90掳, METRIC |
| 56 | SAE MA5075-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 掳C, BEAM SEAL, STRAIGHT TO 90掳, METRIC |
| 57 | SAE MA5069-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 掳C, BEAM SEAL, 45掳 TO 45掳, METRIC |
| 58 | SAE MA5074-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 掳C, BEAM SEAL, STRAIGHT TO 45掳, METRIC |
| 59 | SAE MA5073-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 kPa, 135 掳C, BEAM SEAL, STRAIGHT TO STRAIGHT, METRIC |
| 60 | SAE MA5070-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 掳C, BEAM SEAL, 45掳 TO 90掳, METRIC |
| 61 | SAE MA5071-1996 | 1996-11-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 kPa, 135 掳C, BEAM SEAL, 90掳 TO 90掳, METRIC |
| 62 | SAE MA4510-1996 | 1996-11-01(R 2007) | English | Fittings, Weld, Fluid Connection, 35,000 kPa, Metric |
| 63 | SAE ARP1953A-1996 | 1996-11-01(R 2007) | English | ACCEPTANCE TEST PROCEDURES AND STANDARDS TO INSURE CLEAN FUEL SYSTEM COMPONENTS |
| 64 | SAE MA4510/1-1996 | 1996-11-01(R 2007) | English | Fittings, Weld to 24 Degree Cone Flareless, Fluid Connection, Metric |
| 65 | SAE MA4095-1996 | 1996-11-01(R 2007) | English | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced 135 Degrees C, 34,500 kPa, Hydraulic and Pneumatic |
| 66 | SAE AS5103-1996 | 1996-11-01(R 2007) | English | Fitting Assembly, Plug, Ring Locked Port Connection, 4000 psi and 5000 psi/8/ |
| 67 | SAE MA3304A-1996 | 1996-11-01(R 2006) | English | Bolt-Machine, Hex Head, Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric - FSC 5306
DoD Adopted |
| 68 | SAE AS3581-1996 | 1996-11-01(R 2006) | English | Packing, Preformed - O-Ring Seal AMS 7259
DoD Adopted |
| 69 | SAE AS3472A-1996 | 1996-11-01(R 2006) | English | Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286 - UNS S66286
DoD Adopted |
| 70 | SAE AIR4980-1996 | 1996-11-01(R 2006) | English | Modular Avionics Backplane Functional Requirements and Consensus Items (MABFRACI) |
| 71 | SAE AMS2232G-1996 | 1996-11-01(R 2006) | English | Tolerances Carbon Steel, Sheet, Strip, and Plate |
| 72 | SAE J1091-1996 | 1996-11-01(R 2003) | English | Earthmoving Machinery - Operator's Field of View |
| 73 | SAE J2331-1996 | 1996-11-01(R 2002) | English | Operator's Field of View-Engineering Evaluation |
| 74 | SAE AMS3210G-1996 | 1996-11-01(R 2001) | English | Chloroprene (CR) Rubber Electrical Resistant 65 - 75 |
| 75 | SAE J1347-1996 | 1996-11-01 | English | (R) Guide to Manifold Absolute Pressure Transducer Representative Specification |
| 76 | SAE ARP5072-1996 | 1996-11-01 | English | COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, MINITURE SELF-ALIGNING, SELF-SEALING DISCONNECTS |
| 77 | SAE ARP4150-1996 | 1996-11-01 | English | Procedure for Inspection of Inservice Airborne Accumulators for Corrosion and Damage |
| 78 | SAE ARP5089-1996 | 1996-11-01 | English | Composite Repair NDT/NDI Handbook |
| 79 | SAE AIR46B-1996 | 1996-11-01 | English | Preparation and Use of Chromel-Alumel Thermocouples for Aircraft Gas Turbine Engines |
| 80 | SAE MA4510/1-1996 | 1996-11-01 | English | Installation of Externally Swaged Fittings |
| 81 | SAE MA4095-1996 | 1996-11-01 | English | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced 135 Degrees C, 34,500 kPa, Hydraulic and Pneumatic |
| 82 | SAE MA5066-1996 | 1996-11-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 21,000 KPA, 135 °C, BEAM SEAL, STRAIGHT TO STRAIGHT, METRIC |
| 83 | SAE MA5078-1996 | 1996-11-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 34,500 KPA, 135 °C, BEAM SEAL, 90° TO 90°, METRIC |
| 84 | SAE AMS2634B-1996 | 1996-11-01 | English | Ultrasonic Inspection Thin Wall Metal Tubing |
| 85 | SAE MA4510-1996 | 1996-11-01 | English | Fittings, Weld, Fluid Connection, 35,000 kPa, Metric |
| 86 | SAE J1422-1996 | 1996-11-01 | English | Fuel Warmer-Diesel Engines, Information Report |
| 87 | SAE AS3472A-1996 | 1996-11-01 | English | RING, RETAINING - INTERNAL, SPIRAL WOUND HEAVY AND MEDIUM DUTY, UNS S66286 |
| 88 | SAE AIR5026-1996 | 1996-11-01 | English | Test Cell Instrumentation |
| 89 | SAE AMS3920A-1996 | 1996-10-01(R 2014) | English | Acceptance Criteria Adhesive-Bonded Metal-Faced Sandwich Structures |
| 90 | SAE AIR4092A-1996 | 1996-10-01(R 2013) | English | Investigation of PTFE "Melt" Phenomenon for High Pressure Hoses |
| 91 | SAE AIR1664A-1996 | 1996-10-01(R 2013) | English | Aircraft Flexible Tanks General Design and Installation Recommendations |
| 92 | SAE AIR1698A-1996 | 1996-10-01(R 2013) | English | Hose Assembly Identification Practices |
| 93 | SAE AS3230A-1996 | 1996-10-01(R 2012) | English | RIVET - TUBULAR, COUNTERSUNK, AS7232 |
| 94 | SAE AS3228A-1996 | 1996-10-01(R 2012) | English | RIVET – TUBULAR, COUNTERSUNK, AS7228 |
| 95 | SAE AS3231A-1996 | 1996-10-01(R 2012) | English | RIVET - TUBULAR, UNIVERSAL, AS7232 |
| 96 | SAE AS3229A-1996 | 1996-10-01(R 2012) | English | RIVET - TUBULAR, UNIVERSAL, AS7228 |
| 97 | SAE AS4299A-1996 | 1996-10-01(R 2012) | English | Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286 |
| 98 | SAE AS1304A-1996 | 1996-10-01(R 2011) | English | Continuous Flow Chemical Oxygen Generators |
| 99 | SAE AS1303A-1996 | 1996-10-01(R 2011) | English | Portable Chemical Oxygen |
| 100 | SAE AS1162-1996 | 1996-10-01(R 2008) | English | Attitude Instruments, Pitch and Roll Part I Minimum Performance Standard for Equipment |
| 101 | SAE AS855-1996 | 1996-10-01(R 2008) | English | Minimum Performance Standard for Automatic Pressure Altitude Digitizer Equipment |
| 102 | SAE AIR4922-1996 | 1996-10-01(R 2008) | English | Primary Flight Control Hydraulic Actuation System Interface Definition |
| 103 | SAE AIR4092A-1996 | 1996-10-01(R 2007) | English | Investigation of PTFE "Melt" Phenomenon for High Pressure Hoses |
| 104 | SAE AMS2628-1996 | 1996-10-01(R 2007) | English | Ultrasonic Immersion Inspection Titanium and Titanium Alloy Billet Premium Grade |
| 105 | SAE AIR1698A-1996 | 1996-10-01(R 2007) | English | Hose Assembly Identification Practices |
| 106 | SAE AIR1664A-1996 | 1996-10-01(R 2007) | English | AIRCRAFT FLEXIBLE TANKS GENERAL DESIGN AND INSTALLATION RECOMMENDATIONS |
| 107 | SAE MA2300-1996 | 1996-10-01(R 2007) | English | FITTING, ADAPTER, EXTERNAL THREAD BEAM SEAL TO INTEGRAL WELD RING, METRIC |
| 108 | SAE MA2301-1996 | 1996-10-01(R 2007) | English | Fitting, Adapter, Slip on Nut Beam Seal to Weld, Metric |
| 109 | SAE MA2306-1996 | 1996-10-01(R 2007) | English | FITTING, ADAPTER, BULKHEAD, EXTERNAL THREAD BEAM SEAL TO INTEGRAL WELD RING, METRIC |
| 110 | SAE AS3574A-1996 | 1996-10-01(R 2006) | English | BOLT, SHEAR - DOUBLE HEX HEAD, UNS N07718 - 185 ksi
DoD Adopted |
| 111 | SAE AS4299A-1996 | 1996-10-01(R 2006) | English | Rings, Retaining - Spiral Wound, Uniform Section Corrosion and Heat Resistant, UNS S66286
DoD Adopted |
| 112 | SAE AS3229A-1996 | 1996-10-01(R 2006) | English | RIVET - TUBULAR, UNIVERSAL, AS7228
DoD Adopted |
| 113 | SAE AS3230A-1996 | 1996-10-01(R 2006) | English | Rivet - Tubular, Countersunk, AS 7232
DoD Adopted |
| 114 | SAE AS3231A-1996 | 1996-10-01(R 2006) | English | Rivet - Tubular, Universal, AS 7232
DoD Adopted |
| 115 | SAE AS3228A-1996 | 1996-10-01(R 2006) | English | Rivet - Tubular, Countersunk, AS 7228
DoD Adopted |
| 116 | SAE AMS3920A-1996 | 1996-10-01(R 2005) | English | Acceptance Criteria Adhesive-Bonded Metal-Faced Sandwich Structures |
| 117 | SAE J2186-1996 | 1996-10-01(R 2005) | English | E/E Data Link Security |
| 118 | SAE AS1304A-1996 | 1996-10-01(R 2001) | English | Continuous Flow Chemical Oxygen Generators |
| 119 | SAE AS1303A-1996 | 1996-10-01(R 2001) | English | Portable Chemical Oxygen |
| 120 | SAE AIR1664A-1996 | 1996-10-01 | English | Aircraft Flexible Tanks General Design and Installation Recommendations |
| 121 | SAE MA2306-1996 | 1996-10-01 | English | FITTING, ADAPTER, BULKHEAD, EXTERNAL THREAD BEAM SEAL TO INTEGRAL WELD RING, METRIC |
| 122 | SAE AMS3584D-1996 | 1996-10-01 | English | Plastic Tubing, Electrical Insulation Polytetrafluoroethylene, Heat Shrinkable Overexpanded) |
| 123 | SAE AMS3608D-1996 | 1996-10-01 | English | Plastic Sheet Methyl Methacrylate, General Purpose ) |
| 124 | SAE MA2300-1996 | 1996-10-01 | English | FITTING, ADAPTER, EXTERNAL THREAD BEAM SEAL TO INTEGRAL WELD RING, METRIC |
| 125 | SAE AMS3622D-1996 | 1996-10-01 | English | Plastic Moldings and Extrusions, Cellulose Acetate General Purpose ) |
| 126 | SAE AMS3616C-1996 | 1996-10-01 | English | Resin, Polyimide, Laminating and Molding High Temperature Resistant, 370 Degrees C (700 Degrees F) Unfilled, Addition Polymer
DoD Adopted |
| 127 | SAE J541-1996 | 1996-10-01 | English | (R) Voltage Drop for Starting Motor Circuits
DoD Adopted |
| 128 | SAE AMS3671C-1996 | 1996-10-01 | English | Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural
DoD Adopted |
| 129 | SAE AS7481B-1996 | 1996-10-01 | English | Studs, Steel, UNS S66286 Aged After Roll Threaded Procurement Specification For - FSC 5307; Reaffirmed Noncurrent December 2001; Reaffirmed Noncurrent May 2006
DoD Adopted |
| 130 | SAE AMS3674D-1996 | 1996-10-01 | English | Plastic Moldings, Electrical Insulation Cross-Linked Polyolefin, Pigmented, Flexible, Heat Shrinkable |
| 131 | SAE AMS3629B-1996 | 1996-10-01 | English | Polyvinyl Chloride Tubing, Extruded, High Temperature Electrical Insulation |
| 132 | SAE AMS3630F-1996 | 1996-10-01 | English | Plastic Extrusions, Flexible Polyvinyl Chloride
DoD Adopted |
| 133 | SAE AMS3640F-1996 | 1996-10-01 | English | Plastic Moldings Melamine-Formaldehyde, Mineral Filled |
| 134 | SAE J1993-1996 | 1996-09-01(R 2019) | English | High-Carbon Cast-Steel Grit |
| 135 | SAE AS1579D-1996 | 1996-09-01(R 2014) | English | FITTING END, INTEGRAL WELD, LIP, DESIGN STANDARD |
| 136 | SAE J1993-1996 | 1996-09-01(R 2013) | English | High-Carbon Cast-Steel Grit |
| 137 | SAE J827-1996 | 1996-09-01(R 2013) | English | High-Carbon Cast-Steel Shot |
| 138 | SAE AS3582-1996 | 1996-09-01(R 2012) | English | PACKING, PREFORMED – O-RING SEAL AMS3304 |
| 139 | SAE AS269H-1996 | 1996-09-01(R 2012) | English | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts |
| 140 | SAE MA3265-1996 | 1996-09-01(R 2012) | English | WASHER – FLAT LOAD SPREADING METRIC, AMS 5525 |
| 141 | SAE AMS7440D-1996 | 1996-09-01(R 2011) | English | Balls, Steel, Low-Chromium, High Carbon Hardened and Tempered
DoD Adopted |
| 142 | SAE AIR4730-1996 | 1996-09-01(R 2010) | English | GSE Training Videos |
| 143 | SAE AS8013A-1996 | 1996-09-01(R 2008) | English | Minimum Performance Standard for Direction Instrument, Magnetic (Gyroscopically Stabilized) |
| 144 | SAE AS431B-1996 | 1996-09-01(R 2008) | English | TRUE MASS FUEL FLOW INSTRUMENTS |
| 145 | SAE AS443A-1996 | 1996-09-01(R 2008) | English | COMPASS, MAGNETIC, NON-STABILIZED TYPE (FOR TURBINE-POWERED, SUBSONIC AIRCRAFT) |
| 146 | SAE AS432B-1996 | 1996-09-01(R 2008) | English | TACHOMETER INSTRUMENTS (Indicator and Generator) |
| 147 | SAE AS1579D-1996 | 1996-09-01(R 2007) | English | FITTING END, INTEGRAL WELD, LIP, DESIGN STANDARD |
| 148 | SAE AS3582-1996 | 1996-09-01(R 2006) | English | Packing, Preformed - O-Ring Seal AMS 3304
DoD Adopted |
| 149 | SAE MA3265-1996 | 1996-09-01(R 2006) | English | WASHER - FLAT LOAD SPREADING, METRIC, AMS 5525 |
| 150 | SAE AS269H-1996 | 1996-09-01(R 2006) | English | Identification of Material for AN, MS, and AS Engine and Propeller Standard Utility Parts and Also for Company Parts
DoD Adopted |
| 151 | SAE AMS7440D-1996 | 1996-09-01(R 2006) | English | Balls, Steel, Low-Chromium, High Carbon Hardened and Tempered
DoD Adopted |
| 152 | SAE AIR5122-1996 | 1996-09-01(R 2006) | English | ACRYLIC WINDOW TERMINOLOGY AND CRAZING ACCEPTANCE CRITERIA |
| 153 | SAE J827-1996 | 1996-09-01(R 2005) | English | High-Carbon Cast-Steel Shot |
| 154 | SAE J1993-1996 | 1996-09-01(R 2005) | English | High-Carbon Cast-Steel Grit |
| 155 | SAE AMS3890A-1996 | 1996-09-01(R 2005) | English | Graphite Yarn, Non-Structural 5 Ply Yarn, 720 Filaments
DoD Adopted |
| 156 | SAE ARP584B-1996 | 1996-09-01(R 2002) | English | Coiled Tubing, Corrosion Resistant Steel, Hydraulic Applications, Aerospace
DoD Adopted |
| 157 | SAE AMS3346F-1996 | 1996-09-01(R 2001) | English | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer
DoD Adopted |
| 158 | SAE AMS3911C-1996 | 1996-09-01 | English | Fabrication of Sandwich Panels for Light Weight Portable Shelters
DoD Adopted |
| 159 | SAE AIR975A-1996 | 1996-09-01 | English | Maintenance of Pitot- Static Systems of Transport Aircraft |
| 160 | SAE AS440A-1996 | 1996-09-01 | English | Automatic Pilots (Turbine Powered Subsonic Aircraft) |
| 161 | SAE AIR1075A-1996 | 1996-09-01 | English | Barometry for Altimeter Calibration |
| 162 | SAE AMS5681E-1996 | 1996-09-01 | English | Welding Electrodes, Covered, Steel, Corrosion and Heat Resistant 19.5Cr - 10Ni - 0.60(Cb + Ta) (Cancelled September 1996) |
| 163 | SAE R-160-1996 | 1996-09-01 | English | Hydrogen Fuel for Surface Transportation - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 164 | SAE ARP975-1996 | 1996-09-01 | English | COUPLING-CLAMP GROOVE V-BAND - 6,400: 9,400: 11,400 - FLANGE OD |
| 165 | SAE AS437A-1996 | 1996-09-01 | English | Maximum-Allowable- Airspeed Instruments (Turbine Powered Subsonic Aircraft) |
| 166 | SAE AMS4397A-1996 | 1996-09-01 | English | Magnesium Wire, Welding 14Li - 1.25Al (LA 141A) ) |
| 167 | SAE AMS4386B-1996 | 1996-09-01 | English | Magnesium Alloy Sheet and Plate 14Li - 1.25Al (LA 141A-T7)
DoD Adopted |
| 168 | SAE AIR4938-1996 | 1996-09-01 | English | Composite and Bonded Structure Technician/Specialist: Training Document |
| 169 | SAE AMS4171C-1996 | 1996-09-01 | English | Aluminum Alloy Extrusions 4.3Zn - 3.3Mg - 0.60Cu - 0.20Mn - 0.18Cr (7079 -T6) |
| 170 | SAE AS942A-1996 | 1996-09-01 | English | Pressure Altimeter System Minimum Safe Performance Standard |
| 171 | SAE AMS4665B-1996 | 1996-09-01 | English | Silicon Bronze Tubing, Seamless 96Cu - 3.2Si Annealed |
| 172 | SAE AMS3228H-1996 | 1996-09-01 | English | ACRYLONITRILE BUTADIENE (NBR) RUBBER HOT OIL AND COOLANT RESISTANT, LOW SWELL 65 - 75 |
| 173 | SAE AMS4022F-1996 | 1996-09-01 | English | Aluminum Alloy Sheet and Plate, Alclad 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (Alclad 6061; -T4 Sheet, -T451 Plate))
DoD Adopted |
| 174 | SAE J490-1996 | 1996-09-01 | English | (R) Ball Joints |
| 175 | SAE AS8018A-1996 | 1996-09-01 | English | Minimum Performance Standard for Mach Meters |
| 176 | SAE AS3582-1996 | 1996-09-01 | English | PACKING, PREFORMED – O-RING SEAL AMS3304 |
| 177 | SAE AS8018A-1996 | 1996-09-01 | English | Minimum Performance Standard for Mach Meters |
| 178 | SAE AS8016A-1996 | 1996-09-01 | English | Vertical Velocity Instrument (Rate-of-Climb) |
| 179 | SAE AMS4139H-1996 | 1996-09-01 | English | Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.25Cr (7075-T6) |
| 180 | SAE AMS4360E-1996 | 1996-09-01 | English | Magnesium Alloy Forgings 8.5Al - 0.50Zn (AZ80A- T5) |
| 181 | SAE AS8019A-1996 | 1996-09-01 | English | Airspeed Instruments |
| 182 | SAE AIR4068A-1996 | 1996-09-01 | English | Gas Turbine Emission Probe Factors |
| 183 | SAE AIR1418A-1996 | 1996-08-01(R 2013) | English | Flexure Fatigue Strength of Tube Fitting Joints |
| 184 | SAE J1648-1996 | 1996-08-01(R 2013) | English | Protective Coatings for Fasteners |
| 185 | SAE J174M-1996 | 1996-08-01(R 2013) | English | Torque-Tension Test Procedure for Steel Threaded Fasteners - Metric Series |
| 186 | SAE J174-1996 | 1996-08-01(R 2013) | English | Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series |
| 187 | SAE AS1895/19A-1996 | 1996-08-01(R 2013) | English | FLANGE, FEMALE, INTEGRAL, WELD RING, TYPE I STANDARD PROFILE |
| 188 | SAE J892-1996 | 1996-08-01(R 2013) | English | Push-On Spring Nuts Inch Series - General Specifications |
| 189 | SAE J892M-1996 | 1996-08-01(R 2013) | English | Push-On Spring Nuts Metric Series - General Specifications |
| 190 | SAE J1053-1996 | 1996-08-01(R 2013) | English | Steel Stamped Nuts of One Pitch Thread Design - Inch Series |
| 191 | SAE J1053M-1996 | 1996-08-01(R 2013) | English | Steel Stamped Nuts of One Pitch Thread Design - Metric Series |
| 192 | SAE MA1759A-1996 | 1996-08-01(R 2012) | English | Center Hole, Metric |
| 193 | SAE MA1567B-1996 | 1996-08-01(R 2012) | English | Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For |
| 194 | SAE AIR26A-1996 | 1996-08-01(R 2012) | English | Number 70-90, 70L-90, 80-100, and 80L-100 Propeller Shaft Ends Dual Rotation (Propeller Supplied Bearing) |
| 195 | SAE AIR18A-1996 | 1996-08-01(R 2012) | English | Propeller Shaft Ends - Dual Rotation (Engine Supplied Bearing) |
| 196 | SAE AS1B-1996 | 1996-08-01(R 2012) | English | Altitude Graphs Aircraft Reciprocating Engine Performance |
| 197 | SAE AS82B-1996 | 1996-08-01(R 2012) | English | Screw Thread Form, American National, Modified (National Round - NR) |
| 198 | SAE ARP260D-1996 | 1996-08-01(R 2012) | English | Control Lever Connections (60° V Serrations) |
| 199 | SAE AS3568-1996 | 1996-08-01(R 2012) | English | SCREW, DRIVE, ROUND HEAD, TYPE U AMS5504 (UNS S41000) |
| 200 | SAE AS3063B-1996 | 1996-08-01(R 2012) | English | Bolts, Screws, and Studs, Geometric Control Requirements |
| 201 | SAE ARP4977-1996 | 1996-08-01(R 2011) | English | DRYING OF THERMOSETTING COMPOSITE MATERIALS |
| 202 | SAE AIR857A-1996 | 1996-08-01(R 2010) | English | Speed Variation of D-C Motors |
| 203 | SAE AIR34A-1996 | 1996-08-01(R 2010) | English | PENALTIES IN PERFORMANCE OF THREE-PHASE, FOUR-WIRE, 400-CYCLE MOTORS CAUSED BY THE OPENING OF ONE PHASE |
| 204 | SAE MA2304-1996 | 1996-08-01(R 2007) | English | FITTING, UNION, REDUCER, BEAM SEAL, METRIC |
| 205 | SAE MA2294-1996 | 1996-08-01(R 2007) | English | FITTING, ELBOW, 90掳, BEAM SEAL, METRIC |
| 206 | SAE MA2305-1996 | 1996-08-01(R 2007) | English | Fitting, Union, Bulkhead, Beam Seal, Metric |
| 207 | SAE MA2298-1996 | 1996-08-01(R 2007) | English | Fitting, Elbow, 90 Degree, Bulkhead Beam Seal, Metric |
| 208 | SAE MA2303-1996 | 1996-08-01(R 2007) | English | FITTING, UNION, BEAM SEAL, METRIC |
| 209 | SAE MA2289-1996 | 1996-08-01(R 2007) | English | Fitting, Elbow, 45 Degree, Beam Seal, Metric |
| 210 | SAE AS1895/19A-1996 | 1996-08-01(R 2007) | English | Flange, Female, Integral, Weld Ring, Type I Standard Profile
DoD Adopted |
| 211 | SAE MA2292-1996 | 1996-08-01(R 2007) | English | Fitting, Elbow, 45 Degree, Bulkhead Beam Seal, Metric |
| 212 | SAE MA2284-1996 | 1996-08-01(R 2007) | English | Fitting, Tee, Beam Seal, Metric |
| 213 | SAE AS4458B-1996 | 1996-08-01(R 2007) | English | Fitting End, Flareless, Blunt Nose, Design Standard |
| 214 | SAE AMS2641A-1996 | 1996-08-01(R 2007) | English | Vehicle, Magnetic Particle Inspection Petroleum Base |
| 215 | SAE AIR1418A-1996 | 1996-08-01(R 2007) | English | Flexure Fatigue Strength of Tube Fitting Joints |
| 216 | SAE MA2023A-1996 | 1996-08-01(R 2007) | English | (R) ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD, METRIC |
| 217 | SAE MA1567B-1996 | 1996-08-01(R 2006) | English | Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions For
DoD Adopted |
| 218 | SAE AS82B-1996 | 1996-08-01(R 2006) | English | Screw Thread Form, American National, Modified (National Round - NR) |
| 219 | SAE ARP260D-1996 | 1996-08-01(R 2006) | English | Control Lever Connections (60 Degree V Serrations) |
| 220 | SAE AIR26A-1996 | 1996-08-01(R 2006) | English | Number 70-90, 70L-90, 80-100, and 80L-100 Propeller Shaft Ends Dual Rotation (Propeller Supplied Bearing) |
| 221 | SAE ARP4977-1996 | 1996-08-01(R 2006) | English | Drying of Thermosetting Composite Materials |
| 222 | SAE AS3063B-1996 | 1996-08-01(R 2006) | English | Bolts, Screws, and Studs, Geometric Control Requirements |
| 223 | SAE AS1B-1996 | 1996-08-01(R 2006) | English | Altitude Graphs Aircraft Reciprocating Engine Performance |
| 224 | SAE AS3568-1996 | 1996-08-01(R 2006) | English | Screw, Drive, Round Head, Type U AMS 5504 (UNS S41000) |
| 225 | SAE MA1759A-1996 | 1996-08-01(R 2006) | English | Center Hole, Metric |
| 226 | SAE AIR18A-1996 | 1996-08-01(R 2006) | English | Propeller Shaft Ends - Dual Rotation (Engine Supplied Bearing) |
| 227 | SAE AIR4979-1996 | 1996-08-01(R 2004) | English | Estimation of Measurement Uncertainty in Engine Tests Based on NATO AGARD Uniform Engine Test Program |
| 228 | SAE AS84C-1996 | 1996-08-01(R 2004) | English | Splines, Involute (Full Fillet) |
| 229 | SAE J2317-1996 | 1996-08-01(R 2002) | English | Tamper Resistance for Adjustable Parameters on Diesel Fuel Injection Pumps |
| 230 | SAE J174M-1996 | 1996-08-01(R 1998) | English | (R) Torque-Tension Test Procedure for Steel Threaded Fasteners - Metric Series
ANSI Approved |
| 231 | SAE J174-1996 | 1996-08-01(R 1998) | English | Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series
ANSI Approved |
| 232 | SAE MAM2202C-1996 | 1996-08-01 | English | Tolerances, Metric Aluminum Alloy and Magnesium Alloy Sheet and Plate |
| 233 | SAE J892M-1996 | 1996-08-01 | English | (R) Push-On Spring Nuts Metric Series - General Specifications, Standard |
| 234 | SAE J892-1996 | 1996-08-01 | English | (R) Push-On Spring Nuts Inch Series - General Specifications, Standard |
| 235 | SAE AMS1539-1996 | 1996-08-01 | English | Cleaning Compound, Terpene Circuit Board Cleaner |
| 236 | SAE MAM2205A-1996 | 1996-08-01 | English | Tolerances, Metric Aluminum Alloy and Magnesium Alloy Extrusions |
| 237 | SAE MAM2204C-1996 | 1996-08-01 | English | Tolerances, Metric Aluminum Alloy Standard Structural Shapes |
| 238 | SAE AMS5684E-1996 | 1996-08-01 | English | Alloy Welding Electrodes, Covered, Corrosion and Heat Resistant 72Ni - 15Cr - 9.0Fe - 2.8 (Cb+Ta) (Cancelled August 1996) |
| 239 | SAE AIR1537A-1996 | 1996-08-01 | English | Report on Aircraft Engine Containment |
| 240 | SAE ARP4977-1996 | 1996-08-01 | English | Drying of Thermosetting Composite Materials |
| 241 | SAE J1690-1996 | 1996-08-01 | English | Flashers, Recommended Practice |
| 242 | SAE J544-1996 | 1996-08-01 | English | (R) Electric Starting Motor Test Procedure |
| 243 | SAE AMS2204H-1996 | 1996-08-01 | English | Tolerances Aluminum Alloy Standard Structural Shapes |
| 244 | SAE J2317-1996 | 1996-08-01 | English | Tamper Resistance for Adjustable Parameters on Diesel Fuel Injection Pumps |
| 245 | SAE AIR857A-1996 | 1996-08-01 | English | Speed Variation of D-C Motors |
| 246 | SAE J2317-1996 | 1996-08-01 | English | Tamper Resistance for Adjustable Parameters on Diesel Fuel Injection Pumps |
| 247 | SAE MA2292-1996 | 1996-08-01 | English | Fitting, Elbow, 45 Degree, Bulkhead Beam Seal, Metric |
| 248 | SAE J1648-1996 | 1996-08-01 | English | Protective Coatings for Fasteners, Information Report |
| 249 | SAE MA2023A-1996 | 1996-08-01 | English | (R) ALTERNATE DIMENSIONS, CENTER BODY SECTION, SHAPE FLUID FITTING, DESIGN STANDARD, METRIC |
| 250 | SAE J1535-1996 | 1996-08-01 | English | Performance Test for Windshield Defrosting Systems for Off-Road, Self-Propelled Work Machines, Standard |
| 251 | SAE MA2305-1996 | 1996-08-01 | English | Fitting, Union, Bulkhead, Beam Seal, Metric |
| 252 | SAE J1053M-1996 | 1996-08-01 | English | (R) Steel Stamped Nuts of One Pitch Thread Design - Metric Series, Standard
DoD Adopted |
| 253 | SAE MA2304-1996 | 1996-08-01 | English | FITTING, UNION, REDUCER, BEAM SEAL, METRIC |
| 254 | SAE MA2294-1996 | 1996-08-01 | English | FITTING, ELBOW, 90°, BEAM SEAL, METRIC |
| 255 | SAE J1655-1996 | 1996-08-01 | English | Predictive and Preventive Diagnostic Maintenance of Hydraulic Systems, Information Report |
| 256 | SAE MA2298-1996 | 1996-08-01 | English | Fitting, Elbow, 90 Degree, Bulkhead Beam Seal, Metric |
| 257 | SAE MA2284-1996 | 1996-08-01 | English | Fitting, Tee, Beam Seal, Metric |
| 258 | SAE AS4458B-1996 | 1996-08-01 | English | FITTING END, FLARELESS, BLUNT NOSE, DESIGN STANDARD |
| 259 | SAE MA2303-1996 | 1996-08-01 | English | FITTING, UNION, BEAM SEAL, METRIC |
| 260 | SAE AS1941A-1996 | 1996-07-01(R 2013) | English | FITTING END, STRAIGHT THREAD, HIGH PRESSURE, BOSS CONNECTION, DESIGN STANDARD |
| 261 | SAE AS1224B-1996 | 1996-07-01(R 2011) | English | Continuous Flow Aviation Oxygen Masks (for Non-Transport Category Aircraft) |
| 262 | SAE ARP1532A-1996 | 1996-07-01(R 2011) | English | Aircraft Oxygen System Lines, Fabrication, Test and Installation |
| 263 | SAE ARP4259A-1996 | 1996-07-01(R 2011) | English | Metabolic Simulator Testing Systems for Aviation Breathing Equipment |
| 264 | SAE AIR4905-1996 | 1996-07-01(R 2011) | English | Wheel Chocks |
| 265 | SAE AS916B-1996 | 1996-07-01(R 2011) | English | Oxygen Flow Indicators |
| 266 | SAE ARP780B-1996 | 1996-07-01(R 2010) | English | Environmental Systems Schematic Symbols |
| 267 | SAE AS8026A-1996 | 1996-07-01(R 2009) | English | Crewmember Demand Oxygen Mask For Transport Category Aircraft |
| 268 | SAE AS8040A-1996 | 1996-07-01(R 2008) | English | Heater, Aircraft Internal Combustion Heat Exchanger Type |
| 269 | SAE AS1576C-1996 | 1996-07-01(R 2007) | English | Fittings, Welded, Hydraulic, Titanium and Corrosion Resistant Steel, 3000 psi Hydraulic |
| 270 | SAE J175-1996 | 1996-07-01(R 2003) | English | Wheels - Impact Test Procedures - Road Vehicles |
| 271 | SAE AS1224B-1996 | 1996-07-01(R 2002) | English | Continuous Flow Aviation Oxygen Masks (for Non-Transport Category Aircraft) |
| 272 | SAE ARP1532A-1996 | 1996-07-01(R 2002) | English | Aircraft Oxygen System Lines, Fabrication, Test and Installation |
| 273 | SAE EIA-554A-1996 | 1996-07-01(R 2002) | English | Method Selection for Assessment of Nonconforming Levels in Parts Per Million (PPM) - Formerly TechAmerica EIA-554 SET |
| 274 | SAE AIR4905-1996 | 1996-07-01(R 2002) | English | Wheel Chocks |
| 275 | SAE AS916B-1996 | 1996-07-01(R 2002) | English | Oxygen Flow Indicators |
| 276 | SAE ARP4259A-1996 | 1996-07-01(R 2001) | English | Metabolic Simulator Testing Systems for Aviation Breathing Equipment |
| 277 | SAE EIA-681-1996 | 1996-07-01(R 2001) | English | Assessment Guide for Process Certification - Formerly TechAmerica EIA-681 |
| 278 | SAE R-141A-1996 | 1996-07-01 | English | Automotive Air-Conditioning Refrigerant Service Guide - Second Edition; To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 279 | SAE ANSI B92.1-1996 | 1996-07-01 | English | Involute Splines and Inspection - BEST COPY AVAILABLE |
| 280 | SAE AIR5022-1996 | 1996-07-01 | English | Reliability and Safety Process Integration |
| 281 | SAE AS1224B-1996 | 1996-07-01 | English | Continuous Flow Aviation Oxygen Masks (For Non-Transport Category Aircraft) |
| 282 | SAE AS1224B-1996 | 1996-07-01 | English | Continuous Flow Aviation Oxygen Masks (for Non-Transport Category Aircraft) |
| 283 | SAE ARP4259A-1996 | 1996-07-01 | English | Metabolic Simulator Testing Systems for Aviation Breathing Equipment |
| 284 | SAE ARP4259A-1996 | 1996-07-01 | English | Metabolic Simulator Testing Systems for Aviation Breathing Equipment |
| 285 | SAE AS4401-1996 | 1996-06-01(R 2013) | English | Separable Fittings, Permanent Fittings, Tubing, Fluid Systems 8000 psi Qualification Test Standard For |
| 286 | SAE ARP465B-1996 | 1996-06-01(R 2013) | English | Flange - Thermocouple |
| 287 | SAE AS932B-1996 | 1996-06-01(R 2013) | English | FITTING, ADAPTER, REDUCER/EXPANDER, FLARELESS TO BOSS |
| 288 | SAE AS931B-1996 | 1996-06-01(R 2013) | English | FITTING, ADAPTER, UNION, FLARELESS TO BOSS |
| 289 | SAE ARP485A-1996 | 1996-06-01(R 2013) | English | Temperature Measuring Devices Nomenclature |
| 290 | SAE AIR1752A-1996 | 1996-06-01(R 2013) | English | Aircraft Nosewheel Steering/Centering Systems |
| 291 | SAE ARP1621B-1996 | 1996-06-01(R 2012) | English | ULD for Aircraft Transportation of Horses |
| 292 | SAE AIR5006/2-1996 | 1996-06-01(R 2012) | English | Solid Rocket Booster Reliability Guidebook - Volume II Probabilistic Design and Analysis Methods for Solid Rocket Boosters |
| 293 | SAE AIR1336A-1996 | 1996-06-01(R 2007) | English | Vehicle Electrical Systems |
| 294 | SAE AS931B-1996 | 1996-06-01(R 2007) | English | (R) Fitting, Adapter, Union, Flareless to Boss |
| 295 | SAE AS932B-1996 | 1996-06-01(R 2007) | English | (R) Fitting, Adapter, Reducer/Expander, Flareless to Boss |
| 296 | SAE ARP1621B-1996 | 1996-06-01(R 2007) | English | ULD for Aircraft Transportation of Horses |
| 297 | SAE AIR1752A-1996 | 1996-06-01(R 2006) | English | Aircraft Nosewheel Steering/Centering Systems |
| 298 | SAE AS4401-1996 | 1996-06-01(R 2005) | English | SEPARABLE FITTINGS, PERMANENT FITTINGS, TUBING, FLUID SYSTEMS 8000 psi QUALIFICATION TEST STANDARD FOR |
| 299 | SAE J2271M-1996 | 1996-06-01(R 2004) | English | Ship Systems and Equipment - Part Standard for Studs - Continuous and Double End (Metric) |
| 300 | SAE AMS3610D-1996 | 1996-06-01 | English | Barrier Material, Water Vapor Resistant, Flexible, Transparent |
| 301 | SAE AMS7282D-1996 | 1996-06-01 | English | Gaskets, Type XX Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced) |
| 302 | SAE AMS7281D-1996 | 1996-06-01 | English | Gaskets, Type XX Engine Accessory Drive Brass Screen Reinforced ) |
| 303 | SAE AMS3365D-1996 | 1996-06-01 | English | Silicone Rubber Compound Room Temperature Vulcanizing, 35,000 Centipoise Viscosity Durometer 40 - 55 |
| 304 | SAE AMS3367B-1996 | 1996-06-01 | English | SILICONE RUBBER COMPOUND ROOM TEMPERATURE VULCANIZING |
| 305 | SAE ARP485A-1996 | 1996-06-01 | English | Temperature Measuring Devices Nomenclature |
| 306 | SAE AIR1752A-1996 | 1996-06-01 | English | Aircraft Nosewheel Steering/Centering Systems |
| 307 | SAE ARP465B-1996 | 1996-06-01 | English | Flange - Thermocouple |
| 308 | SAE AMS3618A-1996 | 1996-06-01 | English | Resin, Polyimide, Thermosetting High Heat (290 C (554 F) Resistant)
DoD Adopted |
| 309 | SAE AMS3685B-1996 | 1996-06-01 | English | Adhesive, Synthetic Rubber Buna N Type |
| 310 | SAE AMS3822A-1996 | 1996-06-01 | English | Cloth, Type "E" Glass "B" Stage Epoxy Resin Impregnated Style 181 - 75DE ) |
| 311 | SAE AIR5006/2-1996 | 1996-06-01 | English | Solid Rocket Booster Reliability Guidebook - Volume II Probabilistic Design and Analysis Methods for Solid Rocket Boosters |
| 312 | SAE AMS3736B-1996 | 1996-06-01 | English | POTTING COMPOUND, EPOXY, FILLED 25-30 CTE, 175 HDT |
| 313 | SAE AMS3734B-1996 | 1996-06-01 | English | POTTING COMPOUND, EPOXY, UNFILLED ROOM TEMPERATURE CURE |
| 314 | SAE AMS3735C-1996 | 1996-06-01 | English | POTTING COMPOUND, EPOXY, FILLED 10-15 CTE, 225 HDT |
| 315 | SAE AMS3737B-1996 | 1996-06-01 | English | POTTING COMPOUND, EPOXY, UNFILLED 35-40 CTE, 160 HDT |
| 316 | SAE AS1895/5C-1996 | 1996-05-01(R 2015) | English | FLANGE, MALE, SEAM WELD, TYPE II LOW PROFILE(DoD Adopted) |
| 317 | SAE AS1895/6C-1996 | 1996-05-01(R 2015) | English | FLANGE, FEMALE, SEAM WELD, TYPE II LOW PROFILE(DoD Adopted) |
| 318 | SAE AS1895/7C-1996 | 1996-05-01(R 2015) | English | SEAL, TYPE I & II STANDARD AND LOW PROFILE(DoD Adopted) |
| 319 | SAE AS3580-1996 | 1996-05-01(R 2014) | English | BOLT, MACHINE - DOUBLE HEX HEAD, PD SHANK, UNS N07718 - 185 KSI(DoD Adopted) |
| 320 | SAE AS4510/1-1996 | 1996-05-01(R 2013) | English | Fittings, Weld to 24° Cone Flareless, Fluid Connection |
| 321 | SAE AS4444/1-1996 | 1996-05-01(R 2013) | English | Sleeve, Bite Type, 24° Cone Flareless Fitting |
| 322 | SAE AS4444-1996 | 1996-05-01(R 2013) | English | Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi |
| 323 | SAE AS4510-1996 | 1996-05-01(R 2013) | English | Fittings, Weld, Fluid Connection, 5000 psi |
| 324 | SAE AS4510/2-1996 | 1996-05-01(R 2013) | English | Fittings, Weld To Beam Seal, Fluid Connection |
| 325 | SAE AS1895/10C-1996 | 1996-05-01(R 2013) | English | FLANGE, MALE, BUTT WELD, TYPE I STANDARD PROFILE |
| 326 | SAE AS1895/23-1996 | 1996-05-01(R 2013) | English | HIGH CONFORMANCE SEAL, TYPE I & II STANDARD AND LOW PROFILE |
| 327 | SAE AS1895/21A-1996 | 1996-05-01(R 2013) | English | INSTALLATION, JOINT, V-RETAINER COUPLING ASSEMBLY |
| 328 | SAE AS1895/18A-1996 | 1996-05-01(R 2013) | English | FLANGE, MALE, INTEGRAL, WELD RING, TYPE I STANDARD PROFILE |
| 329 | SAE AS1895/17A-1996 | 1996-05-01(R 2013) | English | FLANGE, FEMALE, INTEGRAL, WELD RING, TYPE II LOW PROFILE |
| 330 | SAE AS1895/16A-1996 | 1996-05-01(R 2013) | English | FLANGE, MALE, INTEGRAL, WELD RING, TYPE II LOW PROFILE |
| 331 | SAE AS1895/11C-1996 | 1996-05-01(R 2013) | English | FLANGE, FEMALE, BUTT WELD, TYPE I STANDARD PROFILE |
| 332 | SAE AS4804A-1996 | 1996-05-01(R 2013) | English | HOSE, AIR DUCT, FLEXIBLE, SILICONE-COATED FABRIC, EXTERNAL NYLON HELIX, LOW-NOISE |
| 333 | SAE AS1895/9C-1996 | 1996-05-01(R 2013) | English | FLANGE, FEMALE, BUTT WELD TYPE II LOW PROFILE |
| 334 | SAE AS1895/8C-1996 | 1996-05-01(R 2013) | English | FLANGE, MALE, BUTT WELD TYPE II LOW PROFILE |
| 335 | SAE AS1895/3C-1996 | 1996-05-01(R 2013) | English | FLANGE, FEMALE, SEAM WELD TYPE I STANDARD PROFILE |
| 336 | SAE AS1895/1D-1996 | 1996-05-01(R 2013) | English | COUPLING, V-RETAINER, SINGLE LATCH, TYPE I STANDARD PROFILE |
| 337 | SAE AS1895/2C-1996 | 1996-05-01(R 2012) | English | FLANGE, MALE, SEAM WELD TYPE I STANDARD PROFILE |
| 338 | SAE MA1508-1996 | 1996-05-01(R 2012) | English | Undercuts for Straight Screw Threads - Metric |
| 339 | SAE ARP2B-1996 | 1996-05-01(R 2012) | English | Horsepower Correction Formulae |
| 340 | SAE AS3578-1996 | 1996-05-01(R 2012) | English | PACKING, PREFORMED – O-RING SEAL AMS7271 |
| 341 | SAE AS1560A-1996 | 1996-05-01(R 2012) | English | Modules and Basic Racks of Metric Spur and Helical Gears |
| 342 | SAE ARP953B-1996 | 1996-05-01(R 2012) | English | Stress Dome in Fasteners |
| 343 | SAE AS20C-1996 | 1996-05-01(R 2012) | English | Definitions, Aircraft Reciprocating Engine Performance |
| 344 | SAE AIR1934A-1996 | 1996-05-01(R 2012) | English | Use of Structural Carbon Heat Sink Brakes on Aircraft |
| 345 | SAE AS1310B-1996 | 1996-05-01(R 2012) | English | Faster Torque for Threaded Applications, Definitions Of |
| 346 | SAE AS4510/2-1996 | 1996-05-01(R 2007) | English | Fittings, Weld to Beam Seal, Fluid Connection |
| 347 | SAE AS4971-1996 | 1996-05-01(R 2007) | English | Fitting, Elbow, 90 Degree, Weld Ring |
| 348 | SAE AS4229-1996 | 1996-05-01(R 2007) | English | Fitting, Adapter, Bulkhead, External Thread, Beam Seal to Integral Weld Ring |
| 349 | SAE AS4510-1996 | 1996-05-01(R 2007) | English | Fittings, Weld, Fluid Connection, 5000 psi |
| 350 | SAE AS4510/1-1996 | 1996-05-01(R 2007) | English | Fittings, Weld to 24 Degree Cone Flareless, Fluid Connection |
| 351 | SAE MA2040B-1996 | 1996-05-01(R 2007) | English | NUT, FLARELESS, METRIC
DoD Adopted |
| 352 | SAE AS4972-1996 | 1996-05-01(R 2007) | English | Fitting, Tee, Weld Ring |
| 353 | SAE AMS4233C-1996 | 1996-05-01(R 2007) | English | ALUMINUM ALLOY, WELDING WIRE 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201) - UNS A02010 |
| 354 | SAE AS4444/1-1996 | 1996-05-01(R 2007) | English | Sleeve, Bite Type, 24掳 Cone Flareless Fitting |
| 355 | SAE AS4444-1996 | 1996-05-01(R 2007) | English | Fittings, 24掳 Cone Flareless, Fluid Connection, 5000 psi |
| 356 | SAE AS1895/1D-1996 | 1996-05-01(R 2007) | English | Coupling, V-Retainer, Single Latch, Type I Standard Profile
DoD Adopted |
| 357 | SAE AS1895/2C-1996 | 1996-05-01(R 2007) | English | Flange, Male, Seam Weld Type I Standard Profile
DoD Adopted |
| 358 | SAE AS1895/3C-1996 | 1996-05-01(R 2007) | English | Flange, Female, Seam Weld, Type I Standard Profile
DoD Adopted |
| 359 | SAE AS1895/5C-1996 | 1996-05-01(R 2007) | English | Flange, Male, Seam Weld, Type II Low Profile
DoD Adopted |
| 360 | SAE AS1895/6C-1996 | 1996-05-01(R 2007) | English | Flange, Female, Seam Weld, Type II Low Profile
DoD Adopted |
| 361 | SAE AS1895/7C-1996 | 1996-05-01(R 2007) | English | Seal, Type I & II Standard and Low Profile
DoD Adopted |
| 362 | SAE AS1895/8C-1996 | 1996-05-01(R 2007) | English | Flange, Male, Butt Weld, Type II Low Profile
DoD Adopted |
| 363 | SAE AS1895/9C-1996 | 1996-05-01(R 2007) | English | Flange, Female, Butt Weld, Type II Low Profile
DoD Adopted |
| 364 | SAE AS1895/10C-1996 | 1996-05-01(R 2007) | English | Flange, Male, Butt Weld, Type I Standard Profile
DoD Adopted |
| 365 | SAE AS1895/11C-1996 | 1996-05-01(R 2007) | English | Flange, Female, Butt Weld, Type I Standard Profile
DoD Adopted |
| 366 | SAE AS1895/16A-1996 | 1996-05-01(R 2007) | English | Flange, Male, Integral, Weld Ring, Type II Low Profile
DoD Adopted |
| 367 | SAE AS1895/17A-1996 | 1996-05-01(R 2007) | English | Flange, Female, Integral, Weld Ring, Type II Low Profile
DoD Adopted |
| 368 | SAE AS1895/18A-1996 | 1996-05-01(R 2007) | English | Flange, Male, Integral, Weld Ring, Type I Standard Profile
DoD Adopted |
| 369 | SAE AS1895/21A-1996 | 1996-05-01(R 2007) | English | Installation, Joint, V-Retainer Coupling Assembly
DoD Adopted |
| 370 | SAE AS1895/23-1996 | 1996-05-01(R 2007) | English | High Conformance Seal, Type I & II Standard and Low Profile |
| 371 | SAE AS20C-1996 | 1996-05-01(R 2006) | English | Definitions, Aircraft Reciprocating Engine Performance |
| 372 | SAE AIR1934A-1996 | 1996-05-01(R 2006) | English | Use of Structural Carbon Heat Sink Brakes on Aircraft |
| 373 | SAE ARP2B-1996 | 1996-05-01(R 2006) | English | Horsepower Correction Formulae |
| 374 | SAE ARP169A-1996 | 1996-05-01(R 2006) | English | Numbering of Aircraft Engine Cylinders |
| 375 | SAE AIR4923-1996 | 1996-05-01(R 2006) | English | Bolts and Screws, Aerospace Engine - Materials, Procurement Specifications and Properties |
| 376 | SAE MA1508-1996 | 1996-05-01(R 2006) | English | Undercuts for Straight Screw Threads - Metric |
| 377 | SAE AS1310B-1996 | 1996-05-01(R 2006) | English | Fastener Torque for Threaded Applications, Definitions of
DoD Adopted |
| 378 | SAE AIR1273A-1996 | 1996-05-01(R 2006) | English | Identification and Coding of Fluid and Electrical Piping System Functions |
| 379 | SAE AS3578-1996 | 1996-05-01(R 2006) | English | Packing, Preformed - O-Ring Seal AMS 7271
DoD Adopted |
| 380 | SAE AS1560A-1996 | 1996-05-01(R 2006) | English | Modules and Basic Racks of Metric Spur and Helical Gears |
| 381 | SAE ARP953B-1996 | 1996-05-01(R 2006) | English | Stress Dome in Fasteners |
| 382 | SAE AS3580-1996 | 1996-05-01(R 2006) | English | Bolt, Machine - Double Hex Head, PD Shank, UNS N07718 - 185 ksi
DoD Adopted |
| 383 | SAE J1133-1996 | 1996-05-01(R 2004) | English | School Bus Stop Arm |
| 384 | SAE AIR1823A-1996 | 1996-05-01(R 2003) | English | (R) Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS |
| 385 | SAE AMS6473A-1996 | 1996-05-01 | English | Steel Welding Wire 0.88Cr - 1.8Ni - 1.6Co - 0.42Mo - 0.08V - (0.28 - 0.33C) (SAE 4330V) Vacuum Melted, Environment Controlled Packaging - Reaffirmed Noncurrent July 2001 |
| 386 | SAE CMB 6-6-1996 | 1996-05-01 | English | Reviews and Configuration Audits - Formerly TechAmerica CMB 6-6 |
| 387 | SAE MA2040B-1996 | 1996-05-01 | English | NUT, FLARELESS, METRIC |
| 388 | SAE AIR1934A-1996 | 1996-05-01 | English | Use of Structural Carbon Heat Sink Brakes on Aircraft |
| 389 | SAE AS1310B-1996 | 1996-05-01 | English | Faster Torque for Threaded Applications, Definitions Of |
| 390 | SAE MA1508-1996 | 1996-05-01 | English | Undercuts for Straight Screw Threads - Metric |
| 391 | SAE J2255-1996 | 1996-05-01 | English | Antilock Brake Systems Energy Consumption Test Procedure for Air-Braked-Equipped Truck Tractors, Buses, Trailers, and Dollies, Recommended Practice |
| 392 | SAE AS4971-1996 | 1996-05-01 | English | Fitting, Elbow, 90 Degrees, Weld Ring |
| 393 | SAE AS4972-1996 | 1996-05-01 | English | Fitting, Tee, Weld Ring |
| 394 | SAE ARP1987/3-1996 | 1996-04-01(R 2013) | English | Titles, SAE Subcommittee G-3E Aerospace Tubing Installation Documents, Selection Of |
| 395 | SAE AMS3713D-1996 | 1996-04-01(R 2013) | English | Core, Flexible Honeycomb, Polyamide Paper Base, Phenolic Coated |
| 396 | SAE MA1421-1996 | 1996-04-01(R 2012) | English | Aerospace Selected Diameter-Pitch Combinations of Metric 60° Screw Threads for Shaft or Bearing Retaining Screw Threads |
| 397 | SAE AIR4886-1996 | 1996-04-01(R 2011) | English | Statement on Requirements for Real-Time Communication Protocols (RTCP) |
| 398 | SAE ARP1987/3-1996 | 1996-04-01(R 2007) | English | Titles, SAE Subcommittee G-3E Aerospace Tubing Installation Documents, Selection Of |
| 399 | SAE MA2117B-1996 | 1996-04-01(R 2007) | English | WIRE, RETAINER, SWIVEL, METRIC |
| 400 | SAE MA2014A-1996 | 1996-04-01(R 2007) | English | FITTING END, ACORN FLARELESS DESIGN STANDARD, METRIC |
| 401 | SAE AS4213A-1996 | 1996-04-01(R 2007) | English | Fitting, Plug, Beam Seal, Hydraulic |
| 402 | SAE AS4212A-1996 | 1996-04-01(R 2007) | English | Fitting, Union, Reducer, Beam Seal |
| 403 | SAE MA1421-1996 | 1996-04-01(R 2006) | English | Aerospace Selected Diameter-Pitch Combinations of Metric 60 Degrees Screw Threads for Shaft or Bearing Retaining Screw Threads |
| 404 | SAE J445-1996 | 1996-04-01(R 2005) | English | Metallic Shot and Grit Mechanical Testing |
| 405 | SAE AMS3713D-1996 | 1996-04-01(R 2003) | English | Core, Flexible Honeycomb, Polyamide Paper Base, Phenolic Coated |
| 406 | SAE AMS3579D-1996 | 1996-04-01(R 2003) | English | Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio |
| 407 | SAE ARP785A-1996 | 1996-04-01(R 2002) | English | (R) Aerospace - Procedure for the Determination of Particulate Contamination in Hydraulic Fluids by the Control Filter Gravimetric Procedure
DoD Adopted |
| 408 | SAE AIR4886-1996 | 1996-04-01(R 2001) | English | Statement on Requirements for Real-Time Communication Protocols (RTCP) |
| 409 | SAE AMS4228B-1996 | 1996-04-01 | English | Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201.0-T6) Solution and Precipitation Heat Treated) |
| 410 | SAE AMS6331A-1996 | 1996-04-01 | English | Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo - (0.33 - 0.38C) (SAE 8735) Vacuum Melted, Environment Controlled Packaging - UNS G87350; Reaffirmed Noncurrent July 2001 |
| 411 | SAE AMS5799D-1996 | 1996-04-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Covered Welding Electrodes 48Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W-18.5 Fe - UNS W86002 |
| 412 | SAE MA2014A-1996 | 1996-04-01 | English | FITTING END, ACORN FLARELESS DESIGN STANDARD, METRIC |
| 413 | SAE MA2117B-1996 | 1996-04-01 | English | WIRE, RETAINER, SWIVEL, METRIC |
| 414 | SAE ARP4900-1996 | 1996-04-01 | English | Liquid Rocket Engine Reliability Certification |
| 415 | SAE AMS2640K-1996 | 1996-04-01 | English | Magnetic Particle Inspection |
| 416 | SAE AMS3793/5B-1996 | 1996-03-01(S 2013) | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/8 Inches (28mm), 0.23 to 2.00 Ounces per Yard (7.1 to 62.0 g/m) |
| 417 | SAE ARP5102-1996 | 1996-03-01(R 2013) | English | Fluid Fittings - Jump Size Limitations |
| 418 | SAE AS4356A-1996 | 1996-03-01(R 2013) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, 45° TO 90° |
| 419 | SAE AS4353A-1996 | 1996-03-01(R 2013) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 45° |
| 420 | SAE AS4352A-1996 | 1996-03-01(R 2013) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO STRAIGHT |
| 421 | SAE AS4357A-1996 | 1996-03-01(R 2013) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, 90° TO 90° |
| 422 | SAE AS4355A-1996 | 1996-03-01(R 2013) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, 45° TO 45° |
| 423 | SAE AS4354A-1996 | 1996-03-01(R 2013) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 °F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 90° |
| 424 | SAE AS4352A-1996 | 1996-03-01(R 2007) | English | Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, Straight to Straight |
| 425 | SAE ARP5102-1996 | 1996-03-01(R 2007) | English | Fluid Fittings - Jump Size Limitations |
| 426 | SAE AS4355A-1996 | 1996-03-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 掳F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, 45掳 TO 45掳 |
| 427 | SAE MA2177A-1996 | 1996-03-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE CRES REINFORCED, 232 掳C, 10 500 kPa, BEAM SEAL, STRAIGHT TO 45掳, METRIC
DoD Adopted |
| 428 | SAE AS4357A-1996 | 1996-03-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 掳F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, 90掳 TO 90掳 |
| 429 | SAE AS4356A-1996 | 1996-03-01(R 2007) | English | Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, 45 Degree to 90 Degree |
| 430 | SAE AS4354A-1996 | 1996-03-01(R 2007) | English | Hose Assembly, Polytetrafluoroethylene, Cres Reinforced, 400 Degrees F, 3000 psi, Heavyweight, Beam Seal, Straight to 90 Degrees |
| 431 | SAE MA2176A-1996 | 1996-03-01(R 2007) | English | Hose Assembly, Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa, Beam Seal, Straight to Straight, Metric
DoD Adopted |
| 432 | SAE AS4353A-1996 | 1996-03-01(R 2007) | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, CRES REINFORCED, 400 掳F, 3000 psi, HEAVYWEIGHT, BEAM SEAL, STRAIGHT TO 45掳 |
| 433 | SAE AS4208A-1996 | 1996-03-01(R 2007) | English | FITTING END, BULKHEAD, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD |
| 434 | SAE AMS1371-1996 | 1996-03-01(R 2007) | English | Compound, Rust Remover, Solid/Powder Aircraft and Aerospace Components, Immersion Tank Method |
| 435 | SAE AS4207A-1996 | 1996-03-01(R 2007) | English | Fitting End, External Thread, Beam Seal, Design Standard |
| 436 | SAE AMS1476B-1996 | 1996-03-01(R 2004) | English | Deodorant, Aircraft Toilet
DoD Adopted |
| 437 | SAE J1034-1996 | 1996-03-01 | English | (R) Automobile and Light Truck Engine Coolant Concentrate Ethylene Glycol Type, Recommended Practice |
| 438 | SAE AS4208A-1996 | 1996-03-01 | English | FITTING END, BULKHEAD, EXTERNAL THREAD BEAM SEAL, DESIGN STANDARD |
| 439 | SAE AMS3793/11-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/8 Inch (9.5mm), 0.035 Ounces per Yard (1.09 g/m) |
| 440 | SAE AMS3793/9A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 2.00 Inches (50mm), 0.12 to 1.10 Ounces per Yard (3.7 to 34.1 g/m) |
| 441 | SAE AMS3793/3A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 3/4 Inch (19mm), 0.11 to 0.60 Ounces per Yard (3.4 to 18.6 g/m) |
| 442 | SAE AMS3793/2A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 9/16 Inch (14mm), 0.08 to 0.13 Ounces per Yard (2.5 to 4.0 g/m) |
| 443 | SAE MA2177A-1996 | 1996-03-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE CRES REINFORCED, 232 ⁰C, 10,500 KPA, BEAM SEAL, STRAIGHT TO 45⁰, METRIC |
| 444 | SAE AMS3793/1A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1/2 Inch (12.5mm), 0.06 to 0.56 Ounces per Yard (1.9 to 17.4 g/m) |
| 445 | SAE J/ISO 11512-1996 | 1996-03-01 | English | Machinery for Forestry-Tracked Special Machines - Performance Criteria for Brake Systems, Standard - This document is no longer maintained by SAE |
| 446 | SAE AS4207A-1996 | 1996-03-01 | English | FITTING END, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD |
| 447 | SAE AMS2407E-1996 | 1996-03-01 | English | Plating, Chromium, Porous - Reaffirmed Noncurrent May 2005 |
| 448 | SAE MA2176A-1996 | 1996-03-01 | English | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PTFE CRES REINFORCED, 232 ⁰C, 10,500 KPA, BEAM SEAL, STRAIGHT TO STRAIGHT, METRIC |
| 449 | SAE AMS3793/7A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/2 Inches (37.5mm), 0.12 to 0.47 Ounces per Yard (3.7 to 14.6 g/m) |
| 450 | SAE AMS3793/6A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/4 Inches (31mm), 0.23 Ounces per Yard (7.1 g/m) |
| 451 | SAE J810-1996 | 1996-03-01 | English | (R) Classification of Common Surface Imperfections in Sheet Steel, Information Report |
| 452 | SAE AMS3793/10-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/16 Inch (7.9mm), 0.053 Ounces per Yard (1.64 g/m) |
| 453 | SAE AMS3793/5A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-1/8 Inches (28mm), 0.23 to 2.00 Ounces per Yard (7.1 to 62.0 g/m) |
| 454 | SAE AMS3793/4A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1 Inch (25mm), 0.08 to 1.65 Ounces per Yard (2.5 to 51.2 g/m) |
| 455 | SAE AMS3793/8A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 1-3/4 Inches (44mm), 0.17 to 2.50 Ounces per Yard (5.3 to 77.5 g/m) |
| 456 | SAE AMS3793A-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus |
| 457 | SAE AMS3793/12-1996 | 1996-03-01 | English | Tape and Webbing, Textile, Para-Aramid Intermediate Modulus 5/8 Inch (15.9mm), 0.25 Ounces per Yard (7.75 g/m) |
| 458 | SAE MA3574-1996 | 1996-02-01(R 2012) | English | RIVET-SOLID, UNIVERSAL HEAD, AS7232 CORROSION AND HEAT RESISTANT NICKEL ALLOY, METRIC |
| 459 | SAE MA3574-1996 | 1996-02-01(R 2006) | English | Rivet-Solid, Universal Head, AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric
DoD Adopted |
| 460 | SAE AMS3814/16A-1996 | 1996-02-01(R 1993) | English | Cord, Coreless, Para-Aramid Intermediate Modulus 4000 lb (17 790 N), 75 ft per lb (50 m/kg) |
| 461 | SAE AMS3814/4A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 400 lb (1780 N), 1080 ft per lb (725 m/kg) |
| 462 | SAE AMS3814A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid, Intermediate Modulus |
| 463 | SAE AMS3814/17A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 10 000 lb (44 480 N), 22 ft per lb (15 m/kg) |
| 464 | SAE AMS3814/15A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 300 lb (1335 N), 1500 ft per lb (1005 m/kg)
DoD Adopted |
| 465 | SAE AMS3814/14A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 2750 lb (12 230 N), 100 ft per lb (65 m/kg) |
| 466 | SAE AMS4136A-1996 | 1996-02-01 | English | Aluminum Alloy Forgings 4.3Zn - 3.3Mg - 0.6Cu - 0.2mn - 0.2Cr (7079 - T611) Solution and Precipitation Heat Treated, Low Residual Stresses |
| 467 | SAE AMS3814/13A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 250 lb (1110 N), 1800 ft per lb (1210 m/kg) |
| 468 | SAE AMS3814/12A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 6500 lb (28 915 N), 50 ft per lb (35 m/kg) |
| 469 | SAE AMS3814/11A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 5000 lb (22 240 N), 58 ft per lb (40 m/kg) |
| 470 | SAE AMS3814/10A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 3500 lb (15 570 N), 67 ft per lb (45 m/kg) |
| 471 | SAE AMS3814/9A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 2000 lb (8895 N), 135 ft per lb (90 m/kg) |
| 472 | SAE AMS3814/8A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 1500 lb (6670 N), 200 ft per lb (135 m/kg) |
| 473 | SAE AMS3814/7A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 1000 lb (4450 N), 338 ft per lb (225 m/kg) |
| 474 | SAE AMS3814/6A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 750 lb (3335 N), 425 ft per lb (285 m/kg) |
| 475 | SAE AMS3814/5A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 600 lb (2670 N), 720 ft per lb (485 m/kg) |
| 476 | SAE AMS3814/1A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 35 lb (155 N), 13 500 ft per lb (9070 m/kg) |
| 477 | SAE R-156-1996 | 1996-02-01 | English | Dictionary of Mechanical Engineering - Fourth Edition; To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 478 | SAE AMS3814/3A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 125 lb (555 N), 3240 ft per lb (2175 m/kg) |
| 479 | SAE AMS3814/2A-1996 | 1996-02-01 | English | Cord, Coreless, Para-Aramid Intermediate Modulus 70 lb (310 N), 6450 ft per lb (4335 m/kg) |
| 480 | SAE R-161-1996 | 1996-02-01 | English | Design and Simulation of Two-Stroke Engines - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 481 | SAE AIR4911-1996 | 1996-01-01(R 2013) | English | Requirements Document for Sensor/Video Interconnect Subsystems with Rationale |
| 482 | SAE AS4893-1996 | 1996-01-01(R 2011) | English | Generic Open Architecture (GOA) Framework |
| 483 | SAE J1475-1996 | 1996-01-01(R 2009) | English | Hydraulic Hose Fitting for Marine Applications |
| 484 | SAE AIR4994-1996 | 1996-01-01(R 2007) | English | High Pressure Pneumatic Compressors Users Guide for Aerospace Applications |
| 485 | SAE AS4804A-1996 | 1996-01-01(R 2007) | English | Hose, Air Duct, Flexible, Silicone-Coated Fabric, External Nylon Helix, Low-Noise |
| 486 | SAE ARP991B-1996 | 1996-01-01(R 2007) | English | Position and Anticollision Lights - Turbine Powered Fixed-Wing Aircraft |
| 487 | SAE AIR4911-1996 | 1996-01-01(R 2006) | English | Requirements Document for Sensor/Video Interconnect Subsystems with Rationale |
| 488 | SAE AIR4903-1996 | 1996-01-01(R 2006) | English | PI-Bus Handbook |
| 489 | SAE AS8054-1996 | 1996-01-01(R 2005) | English | AIRBORNE ENGINE VIBRATION MONITORING (EVM) SYSTEM, GUIDELINES FOR PERFORMANCE STANDARD FOR |
| 490 | SAE AS1941A-1996 | 1996-01-01(R 2005) | English | (R) FITTING END, STRAIGHT THREAD, HIGH PRESSURE, BOSS CONNECTION, DESIGN STANDARD |
| 491 | SAE AS4203A-1996 | 1996-01-01(R 2004) | English | Fitting, Beam Seal, Female Tube End, Internal Swage, 4000 psi, Hydraulic |
| 492 | SAE AIR4151-1996 | 1996-01-01(R 2004) | English | Introduction to Starting Systems |
| 493 | SAE AMS7256A-1996 | 1996-01-01(R 2003) | English | Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 85 to 95
DoD Adopted |
| 494 | SAE AMS7255C-1996 | 1996-01-01(R 2003) | English | Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80
DoD Adopted |
| 495 | SAE AS4828-1996 | 1996-01-01(R 2002) | English | Technical Manual Development for Ground Support Equipment |
| 496 | SAE AS4893-1996 | 1996-01-01(R 2002) | English | Generic Open Architecture (GOA) Framework |
| 497 | SAE AIR877B-1996 | 1996-01-01(R 2002) | English | Aerospace-Particle Count Data Conversion and Extrapolation |
| 498 | SAE AS4290-1996 | 1996-01-01(R 2001) | English | Validation Test Plan for AS4074 Linear Token Passing Multiplex Data Bus |
| 499 | SAE J1540-1996 | 1996-01-01(R 2000) | English | Manual Transmission Efficiency and Parasitic Loss Measurement
ANSI Approved |
| 500 | SAE AMS4112D-1996 | 1996-01-01(R 1984) | English | Aluminum Alloy Bars, Rods, and Wire 4.4Cu - 11.5Mg - 0.6Mn (2024-T6) Rolled, Drawn, or Cold Finished |
|