| Pos | standard Number | publication date | Language | Description |
| 1 | SAE AS1714D-2006 | 2006-08-01 | English | (R) NUT ASSEMBLY, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
DoD Adopted |
| 2 | SAE ARP1048B-2006 | 2006-08-01 | English | (R) Instrument and Cockpit Illumination for General Aviation Aircraft |
| 3 | SAE AS1713C-2006 | 2006-08-01 | English | (R) HALF COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS
DoD Adopted |
| 4 | SAE AS1712C-2006 | 2006-08-01 | English | (R) COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS
DoD Adopted |
| 5 | SAE AMS2800D-2006 | 2006-08-01 | English | Identification Finished Parts
DoD Adopted |
| 6 | SAE AMS4597-2006 | 2006-08-01 | English | Copper-Nickel-Tin Alloy, Bars and Rods 77Cu - 15Ni - 8Sn Solution Annealed, Cold Finished and Spinodal Hardened (TX TS) |
| 7 | SAE J2730-2006 | 2006-08-01 | English | Dynamic Cleat Test with Perpendicular and Inclined Cleats |
| 8 | SAE AMS2770H-2006 | 2006-08-01 | English | Heat Treatment of Wrought Aluminum Alloy Parts
DoD Adopted |
| 9 | SAE AS85049/59-A1-2006 | 2006-08-01 | English | Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-C-22992 Connectors, Classes C, J, and R)
DoD Adopted |
| 10 | SAE AMS3415D-2006 | 2006-08-01 | English | Flux, Aluminum Dip Brazing 1030 Degrees F (554 Degrees C) or Lower Liquidus
DoD Adopted |
| 11 | SAE AMS-QQ-A-250/20A-2006 | 2006-08-01 | English | Aluminum Alloy 5456, Plate and Sheet, for Sea Water Applications
DoD Adopted |
| 12 | SAE AMS-QQ-A-250/19A-2006 | 2006-08-01 | English | Aluminum Alloy 5086, Plate and Sheet for Sea Water Applications
DoD Adopted |
| 13 | SAE AMS4028G-2006 | 2006-08-01 | English | Aluminum Alloy Sheet and Plate 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-0) Annealed |
| 14 | SAE J176-2006 | 2006-08-01 | English | (R) Fast Fill Fueling Installation for Off-Road Self-Propelled Work Machines |
| 15 | SAE AS81935/6-2006 | 2006-08-01 | English | BEARING, PLAIN ROD END, SELF-ALIGNING, SELFLUBRICATING, WIDE, EXTERNALLY THREADED, STEEL, CORROSION RESISTANT (CRES) -65 TO +325 掳F |
| 16 | SAE AMS5024H-2006 | 2006-08-01 | English | Steel, Bars, Forgings, and Tubing, Free-Cutting 1.5Mn (0.32 - 0.39C) (SAE 1137) - UNS G11370
DoD Adopted |
| 17 | SAE AIR790C-2006 | 2006-08-01 | English | (R) Considerations on Ice Formation in Aircraft Fuel Systems |
| 18 | SAE J1646-2006 | 2006-08-01 | English | Glossary of TermsLubricated Friction Systems |
| 19 | SAE J1645-2006 | 2006-08-01 | English | (R) Fuel Systems and ComponentsElectrostatic Charge Mitigation |
| 20 | SAE AMS4148E-2006 | 2006-08-01 | English | Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated - UNS A97175
DoD Adopted |
| 21 | SAE AMS5925A-2006 | 2006-08-01 | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Electroslag Remelted - UNS S42025 |
| 22 | SAE AMS4206A-2006 | 2006-08-01 | English | Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged - UNS A97055 |
| 23 | SAE AMS4207B-2006 | 2006-08-01 | English | Aluminum Alloy Sheet, Alclad 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475- T61) Solution and Precipitation Heat Treated
DoD Adopted |
| 24 | SAE J1945-2006 | 2006-08-01 | English | Cross-Tooth Companion Flanges, Type T |
| 25 | SAE J1985-2006 | 2006-08-01 | English | (R) Fuel FilterInitial Single-Pass Efficiency Test Method |
| 26 | SAE AS1718D-2006 | 2006-08-01 | English | (R) COUPLING BODY, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS
DoD Adopted |
| 27 | SAE J2053-2006 | 2006-08-01 | English | (R) Brake Master Cylinder Plastic Reservoir Assembly for Road Vehicles |
| 28 | SAE AS1717D-2006 | 2006-08-01 | English | (R) RETAINER, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED FERRULE TYPE TUBE ENDS
DoD Adopted |
| 29 | SAE ARP582C-2006 | 2006-08-01 | English | Lighting, Integral, For Aircraft Instruments: Criteria for Design of Red Incandescent Lighted Instruments |
| 30 | SAE ARP4252A-2006 | 2006-08-01 | English | Instrumental Methods of Determining Surface Cleanliness |
| 31 | SAE ARP767C-2006 | 2006-08-01 | English | Impact Protective Design of Occupant Environment Transport Aircraft |
| 32 | SAE AS1716D-2006 | 2006-08-01 | English | (R) FERRULE, COUPLING, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TUBE END
DoD Adopted |
| 33 | SAE AMS4405-2006 | 2006-08-01 | English | Aluminum Alloy, Alclad Sheet (6156-T4) 1.0Si - 0.90Cu - 0.60Mn - 0.90Mg Solution Heat Treated and Naturally Aged |
| 34 | SAE AMS4401-2006 | 2006-08-01 | English | Aluminum Alloy Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged |
| 35 | SAE AMS4403-2006 | 2006-08-01 | English | Aluminum Alloy, Die Forgings 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr (7085-T7452) Solution Heat Treated, Compression Stress-Relieved, and Overaged - UNS A97085 |
| 36 | SAE J101-2006 | 2006-08-01 | English | (R) Hydraulic Wheel Cylinders for Automotive Drum Brakes |
| 37 | SAE AS5685-2006 | 2006-08-01 | English | Steel, Corrosion Resistant, Safety Wire, 18Cr - 11.5Ni (UNS S30500) Solution Heat Treated, Cold Finished
DoD Adopted |
| 38 | SAE AMS5022N-2006 | 2006-08-01 | English | Steel Bars, Forgings, and Tubing, Free Cutting 0.14 - 0.20C (SAE 1117) - UNS G11170
DoD Adopted |
| 39 | SAE AMS2678-2006 | 2006-08-01 | English | Furnace Brazing of Parts in a Vacuum Atmosphere |
| 40 | SAE AS5791-2006 | 2006-08-01 | English | FITTING ASSEMBLY, ADAPTER, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC |
| 41 | SAE J2488-2006 | 2006-08-01 | English | SAE No.2 Friction Test Machine 6000 r/min Stepped Power Test |
| 42 | SAE J1756-2006 | 2006-08-01 | English | (R) Determination of the Fogging Characteristics of Interior Automotive Materials |
| 43 | SAE AMS-STD-184A-2006 | 2006-08-01 | English | Identification Marking of Aluminum, Magnesium, and Titanium
DoD Adopted |
| 44 | SAE AMS5747D-2006 | 2006-08-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable - UNS N07750 |
| 45 | SAE J2305-2006 | 2006-08-01 | English | Hazard Reduction for Horizontal Earthboring Machines |
| 46 | SAE J1939-02-2006 | 2006-08-01 | English | Agricultural and Forestry Off-Road Machinery Control and Communication Network |
| 47 | SAE J2115-2006 | 2006-08-01 | English | (R) Air Brake Performance and Wear Test Code Commercial Vehicle Inertia Dynamometer |
| 48 | SAE AMS5843E-2006 | 2006-08-01 | English | Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Work Strengthened, and Aged - UNS R30159
DoD Adopted |
| 49 | SAE ARP4721 PART 2-2006 | 2006-08-01 | English | Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Validation |
| 50 | SAE ARP4721 PART 1-2006 | 2006-08-01 | English | Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Description, Acquisition, and Operation |
| 51 | SAE AMS5842E-2006 | 2006-08-01 | English | Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr - 36Co - 25Ni -7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened - USN R30159
DoD Adopted |
| 52 | SAE AMS5841E-2006 | 2006-08-01 | English | Cobalt-Nickel Alloy, Corrosion and Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening - UNS R30159
DoD Adopted |
| 53 | SAE/TP 2006-01-2175-2006 | 2006-07-17 | English | Nanofluids as Working Media for Loop Heat Pipes |
| 54 | SAE/TP 2006-01-2191-2006 | 2006-07-17 | English | Air and Water Recycling System Development for a Long Duration Lunar Base |
| 55 | SAE/TP 2006-01-2192-2006 | 2006-07-17 | English | Development Status of Amine-based, Combined Humidity, CO2 and Trace Contaminant Control System for CEV |
| 56 | SAE/TP 2006-01-2190-2006 | 2006-07-17 | English | NASA’s On-line Project Information System (OPIS) Attributes and Implementation |
| 57 | SAE/TP 2006-01-2194-2006 | 2006-07-17 | English | Modified X Zeolites as Next Generation Carbon Dioxide Adsorbents |
| 58 | SAE/TP 2006-01-2195-2006 | 2006-07-17 | English | Nanoscale Materials for Human Spaceflight Applications: Regenerable Carbon Dioxide Removal Using Single-wall Carbon Nanotubes |
| 59 | SAE/TP 2006-01-2196-2006 | 2006-07-17 | English | Critical Factor Identification for Vacuum Regenerated Carbon Dioxide and Water Vapor Adsorption Beds |
| 60 | SAE/TP 2006-01-2189-2006 | 2006-07-17 | English | A Simple Project Process Model for Estimating and Controlling Cost and Schedule |
| 61 | SAE/TP 2006-01-2197-2006 | 2006-07-17 | English | Novel Photocatalytic Filter for Removal of Trace Contaminant Gases |
| 62 | SAE/TP 2006-01-2188-2006 | 2006-07-17 | English | Application of Supply Chain Optimization and Protocol Environment Architecture to ALS Modeling and Visualization of a Mars Surface Habitat |
| 63 | SAE/TP 2006-01-2198-2006 | 2006-07-17 | English | Rapid Cycling CO2 and H2O Removal System for EMU |
| 64 | SAE/TP 2006-01-2187-2006 | 2006-07-17 | English | Control of Solid Waste Using Low Temperature Oxidation |
| 65 | SAE/TP 2006-01-2186-2006 | 2006-07-17 | English | Compaction Technologies for Near and Far Term Space Missions |
| 66 | SAE/TP 2006-01-2185-2006 | 2006-07-17 | English | Modeling of Heat and Mass Transfer in a TEC-Driven Lyophilizer |
| 67 | SAE/TP 2006-01-2183-2006 | 2006-07-17 | English | Carbon Production in Space from Pyrolysis of Solid Waste |
| 68 | SAE/TP 2006-01-2182-2006 | 2006-07-17 | English | Development and Testing of a Microwave Powered Solid Waste Stabilization and Water Recovery System |
| 69 | SAE/TP 2006-01-2200-2006 | 2006-07-17 | English | Development of CO2 Remover for Aircraft Advanced ECS |
| 70 | SAE/TP 2006-01-2199-2006 | 2006-07-17 | English | Development of Advanced ECS |
| 71 | SAE/TP 2006-01-2105-2006 | 2006-07-17 | English | Passive Radiation Shielding Investigations in Low Earth Orbit and in an Accelerator |
| 72 | SAE/TP 2006-01-2106-2006 | 2006-07-17 | English | 21st Centruy Lunar Exploration: Advanced Radiation Exposure Assessment |
| 73 | SAE/TP 2006-01-2108-2006 | 2006-07-17 | English | Risk Assessment and Shielding Design for Long-Term Exposure to Ionizing Space Radiation |
| 74 | SAE/TP 2006-01-2109-2006 | 2006-07-17 | English | Standardized Radiation Shield Design Method: 2005 HZETRN |
| 75 | SAE/TP 2006-01-2110-2006 | 2006-07-17 | English | Spacesuit Radiation Shield Design Methods |
| 76 | SAE/TP 2006-01-2111-2006 | 2006-07-17 | English | Interfacing Structural and Thermal Tools for Thermo-elastic Distortion Analysis |
| 77 | SAE/TP 2006-01-2112-2006 | 2006-07-17 | English | Thermal Model Automatic Reduction: Algorithm and Validation Techniques |
| 78 | SAE/TP 2006-01-2113-2006 | 2006-07-17 | English | MonteCarlo Techniques in Thermal Analysis – Design Margins Determination Using Reduced Models and Experimental Data |
| 79 | SAE/TP 2006-01-2114-2006 | 2006-07-17 | English | Development of a Thermo-Electric Cooler Simulation Routine for the Wide Field Camera 3 Thermal Model |
| 80 | SAE/TP 2006-01-2126-2006 | 2006-07-17 | English | Performance Characterization of a Temperature-Swing Adsorption Compressor for Closed-Loop Air Revitalization Based on Integrated Tests with Carbon Dioxide Removal and Reduction Assemblies |
| 81 | SAE/TP 2006-01-2127-2006 | 2006-07-17 | English | Trace Contaminant Removal from Air via Photocatalytic Oxidation |
| 82 | SAE/TP 2006-01-2128-2006 | 2006-07-17 | English | Catalytic Decomposition of Gaseous Byproducts from Primary Solid Waste Treatment Technologies |
| 83 | SAE/TP 2006-01-2130-2006 | 2006-07-17 | English | Testing of Performance of a Scroll Pump in Support of Improved Vapor Phase Catalytic Ammonia Removal (VPCAR) Mass Reduction |
| 84 | SAE/TP 2006-01-2131-2006 | 2006-07-17 | English | Fluid Dynamics Assessment of the VPCAR Water Recovery System in Partial and Microgravity |
| 85 | SAE/TP 2006-01-2132-2006 | 2006-07-17 | English | Diffusion Limited Supercritical Water Oxidation (SCWO) in Microgravity Environments |
| 86 | SAE/TP 2006-01-2133-2006 | 2006-07-17 | English | Modeling and Analyses of an Integrated Air Revitalization System of a 4-Bed Molecular Sieve Carbon Dioxide Removal System (CDRA), Mechanical Compressor Engineering Development Unit (EDU) and Sabatier Engineering Development Unit |
| 87 | SAE/TP 2006-01-2135-2006 | 2006-07-17 | English | A Comparison of Pressure Suit Systems Architectures for the Space Exploration Enterprise |
| 88 | SAE/TP 2006-01-2137-2006 | 2006-07-17 | English | Crew Protection, Contingency EVA and the Crew Exploration Vehicle |
| 89 | SAE/TP 2006-01-2138-2006 | 2006-07-17 | English | Desert Research and Technology Studies 2005 Report |
| 90 | SAE/TP 2006-01-2140-2006 | 2006-07-17 | English | Morphing: A Novel Approach to Astronaut Suit Sizing |
| 91 | SAE/TP 2006-01-2005-2006 | 2006-07-17 | English | Technical Civilizations in the Galaxy |
| 92 | SAE/TP 2006-01-2006-2006 | 2006-07-17 | English | Rapid Microbial Analysis during Simulated Surface EVA at Meteor Crater: Implications for Human Exploration of the Moon and Mars |
| 93 | SAE/TP 2006-01-2007-2006 | 2006-07-17 | English | Results Summary of the Life Support and Habitation and Planetary Protection Workshop |
| 94 | SAE/TP 2006-01-2014-2006 | 2006-07-17 | English | Shuttle Potable Water Quality from STS-26 to STS-114 |
| 95 | SAE/TP 2006-01-2015-2006 | 2006-07-17 | English | ISS Expeditions 10 & 11 Potable Water Sampling and Chemical Analysis Results |
| 96 | SAE/TP 2006-01-2016-2006 | 2006-07-17 | English | Chemical Characterization of U.S. Lab Condensate |
| 97 | SAE/TP 2006-01-2017-2006 | 2006-07-17 | English | Novel Regenerative Carbon Analyzer for Water Quality Monitoring |
| 98 | SAE/TP 2006-01-2019-2006 | 2006-07-17 | English | Toward Human-Robot Interface Standards: Use of Standardization and Intelligent Subsystems for Advancing Human-Robotic Competency in Space Exploration |
| 99 | SAE/TP 2006-01-2020-2006 | 2006-07-17 | English | Evolutionary Adaptive Robotic Systems to Support Lunar Exploration |
| 100 | SAE/TP 2006-01-2022-2006 | 2006-07-17 | English | Collaborating Human – Robot Swarms to Achieve Robust Space Exploration Capabilities |
| 101 | SAE/TP 2006-01-2025-2006 | 2006-07-17 | English | Biological Experiments in Space as the Object of the Educational Program in Ukraine |
| 102 | SAE/TP 2006-01-2028-2006 | 2006-07-17 | English | Water and Energy Transport for Crops under Different Lighting Conditions |
| 103 | SAE/TP 2006-01-2029-2006 | 2006-07-17 | English | Yields of Salad Crops Grown Under Potential Lunar or Mars Habitat Environments: Effect of Temperature and Lighting Intensities |
| 104 | SAE/TP 2006-01-2030-2006 | 2006-07-17 | English | Strawberry Cultivar Analysis: Temperature and Pollination Studies |
| 105 | SAE/TP 2006-01-2032-2006 | 2006-07-17 | English | Evaluation of Coatings and Materials for Future Radiators |
| 106 | SAE/TP 2006-01-2033-2006 | 2006-07-17 | English | The Thermal Design Evolution of the Phoenix Robotic Arm |
| 107 | SAE/TP 2006-01-2035-2006 | 2006-07-17 | English | Mechanically Pumped Fluid Loop Technologies for Thermal Control of Future Mars Rovers |
| 108 | SAE/TP 2006-01-2049-2006 | 2006-07-17 | English | Impact of Shuttle Orbiter Booster Fan Bypass on Integrated Environmental Control and Life Support Systems |
| 109 | SAE/TP 2006-01-2050-2006 | 2006-07-17 | English | The Personal Computer Transport Analyzer Program |
| 110 | SAE/TP 2006-01-2053-2006 | 2006-07-17 | English | Development of a Computer-Aided Tool for System Description, Modeling, Analysis and Integration for Screening Planetary Habitation Alternatives |
| 111 | SAE/TP 2006-01-2055-2006 | 2006-07-17 | English | International Space Station Environmental Control and Life Support System Status: 2005 - 2006 |
| 112 | SAE/TP 2006-01-2056-2006 | 2006-07-17 | English | International Space Station (ISS) Environmental Control and Life Support (ECLS) System Overview of Events: February 2005 – 2006 |
| 113 | SAE/TP 2006-01-2057-2006 | 2006-07-17 | English | Status of the Regenerative ECLSS Water Recovery and Oxygen Generation Systems |
| 114 | SAE/TP 2006-01-2058-2006 | 2006-07-17 | English | Integrated Status of Regenerative Environmental Control and Life Support System (ECLSS) Functions into the International Space Station (ISS) U.S. Laboratory Element |
| 115 | SAE/TP 2006-01-2060-2006 | 2006-07-17 | English | Lessons Learned from the Crew Health Care System (CHeCS) Rack 1 Environmental Control and Life Support (ECLS) Design |
| 116 | SAE/TP 2006-01-2061-2006 | 2006-07-17 | English | Methodology and Assumptions of Contingency Shuttle Crew Support (CSCS) Calculations Using ISS Environmental Control and Life Support Systems |
| 117 | SAE/TP 2006-01-2062-2006 | 2006-07-17 | English | ISS: On-Board ECLSS Maintenance Activities and Launch Logistics |
| 118 | SAE/TP 2006-01-2202-2006 | 2006-07-17 | English | Advanced Space Suit Portable Life Support Subsystem Packaging Design |
| 119 | SAE/TP 2006-01-2078-2006 | 2006-07-17 | English | Rapid and Accurate Determination of Bacterial Abundance and their Physiological Activity in Freshwater used in Closed Ecology Experiment Facilities (CEEF) "Mini-Earth", Japan |
| 120 | SAE/TP 2006-01-2079-2006 | 2006-07-17 | English | Rapid and Accurate Quantification of Bacterial Cells in Fresh Water Using a Simplified Microfluidic Device |
| 121 | SAE/TP 2006-01-2080-2006 | 2006-07-17 | English | Mushroom Cultivation on the Bed of Feces from Shiba Goats |
| 122 | SAE/TP 2006-01-2082-2006 | 2006-07-17 | English | Comparison of Bioregenerative and Physical/Chemical Life Support Systems |
| 123 | SAE/TP 2006-01-2083-2006 | 2006-07-17 | English | Alternative Physical and System Architectures for Membrane Based Advanced Regenerative Space Life Support System Water Processing |
| 124 | SAE/TP 2006-01-2084-2006 | 2006-07-17 | English | Performance of a Magnetically Agitated Photocatalytic Reactor for Oxidation of Ersatz AES Condensate |
| 125 | SAE/TP 2006-01-2085-2006 | 2006-07-17 | English | Effect of Photocatalyst Type on Oxidation of Ersatz Water Using a Photocatalytic Reactor with Slurry Separation |
| 126 | SAE/TP 2006-01-2115-2006 | 2006-07-17 | English | An Environment for Post-Processing Thermal Analysis Results |
| 127 | SAE/TP 2006-01-2117-2006 | 2006-07-17 | English | ATV Jules Verne Thermal Vacuum Test Predictions |
| 128 | SAE/TP 2006-01-2121-2006 | 2006-07-17 | English | System Engineering and Integration of Controls for Advanced Life Support |
| 129 | SAE/TP 2006-01-2122-2006 | 2006-07-17 | English | Integrated Modular Concepts for Improved ECLSS Command and Data Handling |
| 130 | SAE/TP 2006-01-2123-2006 | 2006-07-17 | English | Design of Intelligent Control Software for Mini-Earth |
| 131 | SAE/TP 2006-01-2124-2006 | 2006-07-17 | English | Process Control for Advanced Life Support, Biological Test Bed |
| 132 | SAE/TP 2006-01-2125-2006 | 2006-07-17 | English | Simulation Model for the Closed Animal and Habitation Experiment Facility of CEEF |
| 133 | SAE/TP 2006-01-2145-2006 | 2006-07-17 | English | LET Spectra of High Energy Proton Beam on A-150: Model Predictions for The CRaTER Detector |
| 134 | SAE/TP 2006-01-2146-2006 | 2006-07-17 | English | MicroDosimeter iNstrument (MIDN) on MidSTAR-I |
| 135 | SAE/TP 2006-01-2147-2006 | 2006-07-17 | English | An Improved Green’s Function Code for HZE Ion Transport |
| 136 | SAE/TP 2006-01-2148-2006 | 2006-07-17 | English | Steps Toward Developing a Multi-layer Green’s Function Code for Ion Beam Transport |
| 137 | SAE/TP 2006-01-2149-2006 | 2006-07-17 | English | A New Method for Calculating Low Energy Neutron Flux |
| 138 | SAE/TP 2006-01-2150-2006 | 2006-07-17 | English | Paecilomyces lilacinus and Fusarium verticillioides Remove t-Butanol from Contaminated Air |
| 139 | SAE/TP 2006-01-2151-2006 | 2006-07-17 | English | Flight Data Update on Long-Term Compound Stability in Dual Sorbent Tubes |
| 140 | SAE/TP 2006-01-2152-2006 | 2006-07-17 | English | Airborne Dust in Space Vehicles and Habitats |
| 141 | SAE/TP 2006-01-2153-2006 | 2006-07-17 | English | Evaluation of Gas Chromatography-Differential Mobility Spectrometry for Measurement of Air Contaminants in Spacecraft |
| 142 | SAE/TP 2006-01-2154-2006 | 2006-07-17 | English | Indoor Air Comfort for Human Life Support in Living Compartments of Manned Submersibles |
| 143 | SAE/TP 2006-01-2155-2006 | 2006-07-17 | English | NOx Emission during Operation of a Drying Toilet System in Air-Circulated Confinement Experiment |
| 144 | SAE/TP 2006-01-2156-2006 | 2006-07-17 | English | The Influence of Microbiology on Spacecraft Design and Controls: A Historical Perspective of the Shuttle and International Space Station Programs |
| 145 | SAE/TP 2006-01-2157-2006 | 2006-07-17 | English | Microbial Characterization of Internal Active Thermal Control System (IATCS) Hardware Surfaces after Five Years of Operation in the International Space Station |
| 146 | SAE/TP 2006-01-2205-2006 | 2006-07-17 | English | Durable Coating Technology for Lunar Dust Protection and Mitigation |
| 147 | SAE/TP 2006-01-2164-2006 | 2006-07-17 | English | ATCS Re-Certification Test: The Investigation of Columbus MT Loop Performances Close and Beyond Its Maximum Operative Limits |
| 148 | SAE/TP 2006-01-2165-2006 | 2006-07-17 | English | Thermal Design and Model Correlation of a Microgravity Vibration Isolation System for an International Space Station Facility |
| 149 | SAE/TP 2006-01-2166-2006 | 2006-07-17 | English | ISS Node 3 IECS Anti-Condensation Insulation Design |
| 150 | SAE/TP 2006-01-2167-2006 | 2006-07-17 | English | Russian Systems Thermal Tailoring and Application on ATV Cargo Carrier |
| 151 | SAE/TP 2006-01-2168-2006 | 2006-07-17 | English | The Variable Effective Surface Radiator, Novel Heat Switch Technology Based on the Oscillating Heat Pipe Principle |
| 152 | SAE/TP 2006-01-2169-2006 | 2006-07-17 | English | Extensive Development of the Loop Heat Pipe Technology |
| 153 | SAE/TP 2006-01-2141-2006 | 2006-07-17 | English | System Considerations for an Exploration Spacesuit Upper Torso Architecture |
| 154 | SAE/TP 2006-01-2142-2006 | 2006-07-17 | English | Morphing Upper Torso: A Novel Concept in EVA Suit Design |
| 155 | SAE/TP 2006-01-2170-2006 | 2006-07-17 | English | A Laboratory Setup for Observation of Loop Heat Pipe Characteristics |
| 156 | SAE/TP 2006-01-2143-2006 | 2006-07-17 | English | Evaluation of the Rear Entry I-Suit during Desert RATS Testing |
| 157 | SAE/TP 2006-01-2171-2006 | 2006-07-17 | English | Development of Loop Heat Pipe with Pressure Regulator |
| 158 | SAE/TP 2006-01-2144-2006 | 2006-07-17 | English | Numerical Study of the Generation of Linear Energy Transfer Spectra for Space Radiation Applications |
| 159 | SAE/TP 2006-01-2159-2006 | 2006-07-17 | English | Microbiological Sampling of the Multi-Purpose Logistics Module from Return to Flight Mission ISS LF-1/STS-114 |
| 160 | SAE/TP 2006-01-2160-2006 | 2006-07-17 | English | Airborne Endospore Bioburden as an Indicator of Spacecraft Cleanliness |
| 161 | SAE/TP 2006-01-2161-2006 | 2006-07-17 | English | ISS Internal Active Thermal Control System (IATCS) Coolant Remediation Project - 2006 Update |
| 162 | SAE/TP 2006-01-2172-2006 | 2006-07-17 | English | Performance Improvement in Loop Heat Pipe Using Primary Wick with Circumferential Grooves |
| 163 | SAE/TP 2006-01-2173-2006 | 2006-07-17 | English | Modeling of a Loop Heat Pipe with Evaporator of Circumferential Vapor Grooves in Primary Wick |
| 164 | SAE/TP 2006-01-2214-2006 | 2006-07-17 | English | Plant Facilities for Inflatable Habitats |
| 165 | SAE/TP 2006-01-2215-2006 | 2006-07-17 | English | The Point-By-Point Irradiance Method Applied to Plant Systems Based on the Phytometric System |
| 166 | SAE/TP 2006-01-2216-2006 | 2006-07-17 | English | Preliminary Trade Study of Evaporative Heat Sinks |
| 167 | SAE/TP 2006-01-2217-2006 | 2006-07-17 | English | Development of a Contaminant Insensitive Sublimator |
| 168 | SAE/TP 2006-01-2218-2006 | 2006-07-17 | English | An Environmental Impact Assessment of Perfluorocarbon Thermal Working Fluid Use on Board Crewed Spacecraft |
| 169 | SAE/TP 2006-01-2219-2006 | 2006-07-17 | English | Development and Testing of a Sorbent-Based Atmosphere Revitalization System for the Crew Exploration Vehicle |
| 170 | SAE/TP 2006-01-2220-2006 | 2006-07-17 | English | Mathematical Simulation of the Sorbent-Based Atmosphere Revitalization System for the Crew Exploration Vehicle |
| 171 | SAE/TP 2006-01-2223-2006 | 2006-07-17 | English | Development of the Low-temperature Arterial Heat Pipes |
| 172 | SAE/TP 2006-01-2228-2006 | 2006-07-17 | English | Modeling of a Real LHP and Integration in a System Level Analysis |
| 173 | SAE/TP 2006-01-2229-2006 | 2006-07-17 | English | Variable Conductance Thermal Control by Passive or Active Control of Fluid Manipulation |
| 174 | SAE/TP 2006-01-2230-2006 | 2006-07-17 | English | Reappraisal of Unrealised & Novel Thermal Control Issues For Applications in Future Spacecraft |
| 175 | SAE/TP 2006-01-2231-2006 | 2006-07-17 | English | Lunar EVA Thermal Environment Challenges |
| 176 | SAE/TP 2006-01-2232-2006 | 2006-07-17 | English | Performance Testing of an Advanced Lightweight Freezable Radiator |
| 177 | SAE/TP 2006-01-2233-2006 | 2006-07-17 | English | The Development of a Planetary Suit Concept Demonstrator by the North Dakota Space Grant Consortium |
| 178 | SAE/TP 2006-01-2234-2006 | 2006-07-17 | English | Advanced Airlock Concept Studies for Exploration Surface Systems |
| 179 | SAE/TP 2006-01-2235-2006 | 2006-07-17 | English | Thermal Performance of Space Suit Elements with Aerogel Insulation for Moon and Mars Exploration |
| 180 | SAE/TP 2006-01-2236-2006 | 2006-07-17 | English | Flexible Fabrics with High Thermal Conductivity for Advanced Spacesuits |
| 181 | SAE/TP 2006-01-2237-2006 | 2006-07-17 | English | Informativeness of the Finger Temperature/Heat Flux as an Index of Human Thermal Status Under Local Cold Influences |
| 182 | SAE/TP 2006-01-2238-2006 | 2006-07-17 | English | Wissler Simulations of a Liquid Cooled and Ventilation Garment (LCVG) for Extravehicular Activity (EVA) |
| 183 | SAE/TP 2006-01-2239-2006 | 2006-07-17 | English | Phase II Testing of Liquid Cooling Garments Using a Sweating Manikin, Controlled by a Human Physiological Model |
| 184 | SAE/TP 2006-01-2240-2006 | 2006-07-17 | English | Extravehicular Mobility Unit (EMU) / International Space Station (ISS) Coolant Loop Failure and Recovery |
| 185 | SAE/TP 2006-01-2241-2006 | 2006-07-17 | English | New Direction of NASA Exploration Life Support |
| 186 | SAE/TP 2006-01-2243-2006 | 2006-07-17 | English | Process for Selecting System Level Assessments for Human System Technologies |
| 187 | SAE/TP 2006-01-2244-2006 | 2006-07-17 | English | A Simulation Approach to Minimize Water Supply, Storage Capacity and Treatment Capacity Requirements in ALS System |
| 188 | SAE/TP 2006-01-2245-2006 | 2006-07-17 | English | Modeling the Impact of Water Systems Configuration on the Overall System Health of a Human Space Habitat |
| 189 | SAE/TP 2006-01-2246-2006 | 2006-07-17 | English | An Optimization Framework to Design an Integrated ALSS |
| 190 | SAE/TP 2006-01-2247-2006 | 2006-07-17 | English | Reduced Pressure Atmosphere Impacts on Life Support and Internal Thermal Systems |
| 191 | SAE/TP 2006-01-2248-2006 | 2006-07-17 | English | Recommendations for Clothing Systems for Advanced Missions |
| 192 | SAE/TP 2006-01-2249-2006 | 2006-07-17 | English | The Architecture of Time, Part 2: The Darian System for Mars |
| 193 | SAE/TP 2006-01-2255-2006 | 2006-07-17 | English | Anaerobic Stabilization of Early Planetary Base Ersatz Wastewater Formulation |
| 194 | SAE/TP 2006-01-2256-2006 | 2006-07-17 | English | Simultaneous Biodegradation of a Two-Phase Fluid: Discolored Biofilm Issues |
| 195 | SAE/TP 2006-01-2257-2006 | 2006-07-17 | English | Alleviating Carbon Limitations in the Early Planetary Base Waste Stream |
| 196 | SAE/TP 2006-01-2258-2006 | 2006-07-17 | English | Post-Treatment of Anaerobically Digested Solid Waste in Long Term Space Missions |
| 197 | SAE/TP 2006-01-2259-2006 | 2006-07-17 | English | Theoretical Applications for Mechanized Vermi-Composting Technology as a Bio-Regenerative Tool in CELSS |
| 198 | SAE/TP 2006-01-2260-2006 | 2006-07-17 | English | Principles of Express Instrumental Control of Total Toxicity of Environmental Objects and Their Realization in Space Conditions |
| 199 | SAE/TP 2006-01-2261-2006 | 2006-07-17 | English | FLPP: A European Opportunity for the Development of Re-entry / Reuse Technologies – Materials and Structures |
| 200 | SAE/TP 2006-01-2262-2006 | 2006-07-17 | English | Hybrid Structure Concept for Winglet Design |
| 201 | SAE/TP 2006-01-2263-2006 | 2006-07-17 | English | Multi-function Tuneable Emittance Smart Coatings for Thermal Control in Harsh Space Environment |
| 202 | SAE/TP 2006-01-2264-2006 | 2006-07-17 | English | Nanoparticle-enhanced Heat Transfer Fluids for Spacecraft Thermal Control Systems |
| 203 | SAE/TP 2006-01-2267-2006 | 2006-07-17 | English | Radiator Performance Enhancement using a LiBr-H2O Absorption Cooler and Microchannel Technology: A Portable Life Support System Example |
| 204 | SAE/TP 2006-01-2268-2006 | 2006-07-17 | English | Thermal Conductivity Testing of Radiation Shielding Materials for Use as Thermal Insulation |
| 205 | SAE/TP 2006-01-2269-2006 | 2006-07-17 | English | The Performance of the System for Water Recovery from Humidity Condensate (SRV-K) on International Space Station, ISS Missions 1 through 11 |
| 206 | SAE/TP 2006-01-2270-2006 | 2006-07-17 | English | Design Status of ARES for Accommodation on the ISS |
| 207 | SAE/TP 2006-01-2271-2006 | 2006-07-17 | English | Integrated Test and Evaluation of a 4-Bed Molecular Sieve, Temperature Swing Adsorption Compressor, and Sabatier Engineering Development Unit |
| 208 | SAE/TP 2006-01-2272-2006 | 2006-07-17 | English | Methane Pyrolysis Technology as Part of Life Support and ISRU Systems; Design Trade-Off Supported by Breadboarding |
| 209 | SAE/TP 2006-01-2273-2006 | 2006-07-17 | English | Wastewater Processing Cascade Distillation Subsystem Design and Evaluation |
| 210 | SAE/TP 2006-01-2274-2006 | 2006-07-17 | English | A Water Recovery System Evolved for Exploration |
| 211 | SAE/TP 2006-01-2275-2006 | 2006-07-17 | English | Porous Media Based Phase Separation in Condensing Heat Exchanger for Space Systems |
| 212 | SAE/TP 2006-01-2276-2006 | 2006-07-17 | English | LISA PathFinder Thermal Design and Micro-Disturbance Considerations |
| 213 | SAE/TP 2006-01-2277-2006 | 2006-07-17 | English | Development of the Temperature Control Scheme for the CALIPSO Integrated Lidar Transmitter Subsystem |
| 214 | SAE/TP 2006-01-2278-2006 | 2006-07-17 | English | Comparison of Recent Satellite Flight Temperatures with Thermal Model Predictions |
| 215 | SAE/TP 2006-01-2279-2006 | 2006-07-17 | English | An Evaluation of the Hubble Space Telescope Thermal Design in Preparation for the Final Servicing Mission |
| 216 | SAE/TP 2006-01-2280-2006 | 2006-07-17 | English | Hubble Space Telescope Thermal Math Model Improvement after Fifteen Years of On-Orbit Operations |
| 217 | SAE/TP 2006-01-2285-2006 | 2006-07-17 | English | Micrometeoroid and Orbital Debris Enhancements of Shuttle Extravehicular Mobility Unit Thermal Micrometeoroid Garment |
| 218 | SAE/TP 2006-01-2286-2006 | 2006-07-17 | English | A Mathematical Model to Predict and Maintain the Neutral Buoyancy of Suited Astronauts |
| 219 | SAE/TP 2006-01-2287-2006 | 2006-07-17 | English | System Overview and Operations of the MX-2 Neutral Buoyancy Space Suit Analogue |
| 220 | SAE/TP 2006-01-2288-2006 | 2006-07-17 | English | Development of an EVA Support Equipment System for Exploration Using ISS Lessons Learned |
| 221 | SAE/TP 2006-01-2290-2006 | 2006-07-17 | English | Defining Space Suit Operational Requirements for Lunar and Mars Missions and Assessing Alternative Architectures |
| 222 | SAE/TP 2006-01-2291-2006 | 2006-07-17 | English | Access Systems for Partial Gravity Exploration & Rescue: Engineering Analysis & Design |
| 223 | SAE/TP 2006-01-2293-2006 | 2006-07-17 | English | Air Circulation Confinement Experiments in the CEEF: Psychological Status in Eco-nauts through Repeated Seven-Day Habitations |
| 224 | SAE/TP 2006-01-2294-2006 | 2006-07-17 | English | Air Circulation Confinement Experiments in the CEEF: Physiological Status in Econauts through Repeated Seven-day Habitations |
| 225 | SAE/TP 2006-01-2295-2006 | 2006-07-17 | English | Air Circulation Confinement Experiments in the CEEF - Workloads and Energy Expenditures of Eco-nauts in Closed Habitation Experiments |
| 226 | SAE/TP 2006-01-2296-2006 | 2006-07-17 | English | Air Circulation Confinement Experiments in the CEEF - Changes in Physical Conditions and Health Managements of Eco-nauts |
| 227 | SAE/TP 2006-01-2297-2006 | 2006-07-17 | English | Mission Planning and Re-planning for Planetary Extravehicular Activities: Analysis of Excursions in a Mars-Analog Environment and Apollo Program |
| 228 | SAE/TP 2006-01-2298-2006 | 2006-07-17 | English | Static Postural Analysis: A Methodology to Assess Gravity Related Sensory-Motor Controls’ Status for Astronauts |
| 229 | SAE/TP 2006-01-2162-2006 | 2006-07-17 | English | Fluid Quick Disconnects – ISS Lessons Learned |
| 230 | SAE/TP 2006-01-2163-2006 | 2006-07-17 | English | Heat Pipe Heat Exchanger with Two Levels of Isolation for Environmental Control of Manned Spacecraft Crew Compartment |
| 231 | SAE/TP 2006-01-2174-2006 | 2006-07-17 | English | Mathematical Modeling of Multiple Evaporator/Multiple Condenser LHPs Using EcosimPro |
| 232 | SAE/TP 2006-01-2176-2006 | 2006-07-17 | English | The ANITA Air Monitoring Programme and Instrumentation – ISS and Other Applications |
| 233 | SAE/TP 2006-01-2177-2006 | 2006-07-17 | English | Protein-based Sensors for Environmental Monitoring |
| 234 | SAE/TP 2006-01-2178-2006 | 2006-07-17 | English | Advanced Miniature IR Spectral Processor for the Infrared Spectral Monitoring of Spacecraft Vital Life-Support Systems and Remote Astronaut Health Diagnostics |
| 235 | SAE/TP 2006-01-2179-2006 | 2006-07-17 | English | Expanding the Capabilities of the JPL Electronic Nose for an International Space Station Technology Demonstration |
| 236 | SAE/TP 2006-01-2206-2006 | 2006-07-17 | English | Human Systems Monitoring during Extravehicular Activity |
| 237 | SAE/TP 2006-01-2208-2006 | 2006-07-17 | English | Emergency Oxygen System Evaluation for Exploration PLSS Applications |
| 238 | SAE/TP 2006-01-2210-2006 | 2006-07-17 | English | Instrumental Approaches and Peculiarities of Design of Stationary and Portable Analytical Devices for Determination of Bio- and Chemi-Luminescence |
| 239 | SAE/TP 2006-01-2211-2006 | 2006-07-17 | English | Integration of Heat Capacity and Electrical Conductivity Sensors for Root Module Water and Nutrient Assessment |
| 240 | SAE/TP 2006-01-2212-2006 | 2006-07-17 | English | Single Loop for Cell Culture (SLCC) – Development and Spaceflight Qualification of a Perfusion Cell Culture System |
| 241 | SAE/TP 2006-01-2213-2006 | 2006-07-17 | English | Optimization of Extraterrestrial Plant Biology Research Through the Use of Standardized Plant Cultivation and Analysis Technologies |
| 242 | SAE/TP 2006-01-2008-2006 | 2006-07-17 | English | Proof of Concept Testing of Low Temperature Brine Microbial Habitats for Subsurface Mars and Europa Habitat Viability Scenario Testing and Astrobiology Biosignature Instrument Development |
| 243 | SAE/TP 2006-01-2180-2006 | 2006-07-17 | English | Simulated Human Feces for Testing Human Waste Processing Technologies in Space Systems |
| 244 | SAE/TP 2006-01-2104-2006 | 2006-07-17 | English | Radiation Shielding and Mechanical Strength Evaluations of Non-parasitic, Multi-functional Microporous Carbon for Aerospace Applications |
| 245 | SAE/TP 2006-01-2103-2006 | 2006-07-17 | English | Space Radiation Exposure Mitigation: Study of Select Materials |
| 246 | SAE/TP 2006-01-2101-2006 | 2006-07-17 | English | Constraints Driven Design of a Surface Inflatable Habitat Module |
| 247 | SAE/TP 2006-01-2100-2006 | 2006-07-17 | English | How to Make an Anchor-Free, Flat-Floor Inflatable Habitat for the Moon or Mars |
| 248 | SAE/TP 2006-01-2203-2006 | 2006-07-17 | English | Development of Pressure Swing Adsorption Technology for Spacesuit Carbon Dioxide and Humidity Removal |
| 249 | SAE/TP 2006-01-2096-2006 | 2006-07-17 | English | Design and Certification of the Extravehicular Activity Mobility Unit (EMU) Water Processing Jumper |
| 250 | SAE/TP 2006-01-2095-2006 | 2006-07-17 | English | Recommendations for Water Systems in Future Space Applications |
| 251 | SAE/TP 2006-01-2094-2006 | 2006-07-17 | English | International Space Station Water Usage Analysis |
| 252 | SAE/TP 2006-01-2093-2006 | 2006-07-17 | English | International Space Station (ISS) Water Transfer Hardware Logistics |
| 253 | SAE/TP 2006-01-2092-2006 | 2006-07-17 | English | International Space Station (ISS) Major Constituent Analyzer (MCA) On-Orbit Performance |
| 254 | SAE/TP 2006-01-2091-2006 | 2006-07-17 | English | International Space Station Nitrogen System Performance |
| 255 | SAE/TP 2006-01-2090-2006 | 2006-07-17 | English | International Space Station (ISS) Metabolic Oxygen Consumption for Expeditions 12 |
| 256 | SAE/TP 2006-01-2193-2006 | 2006-07-17 | English | Monolithic Sorbents for Carbon Dioxide Removal |
| 257 | SAE/TP 2006-01-2088-2006 | 2006-07-17 | English | Energy-Efficient Closed Loop Heat Pump Dryer for Solid Waste Stabilization on Long Duration Space Missions |
| 258 | SAE/TP 2006-01-2087-2006 | 2006-07-17 | English | Design Validation - via Parabolic Flight Tests - of a Condensate Buffer equalizing a discontinuous Gas / Water Flow between a Condensing Heat Exchanger and a Water Separator |
| 259 | SAE/TP 2006-01-2086-2006 | 2006-07-17 | English | New Concepts and Performance of the Direct Osmotic Concentration Process for Wastewater Recovery in Advanced Life Support Systems |
| 260 | SAE/TP 2006-01-2076-2006 | 2006-07-17 | English | Carbon Dioxide Separation and Recovery from the Closed Animal Breeding and Habitation Module of the CEEF during Closed Habitation Experiments |
| 261 | SAE/TP 2006-01-2075-2006 | 2006-07-17 | English | Carbon Flow in an Artificial Ecosystem Comprised of Crew, Goats and Crops for Three 1-Week Confined Habitation Experiments Using CEEF |
| 262 | SAE/TP 2006-01-2074-2006 | 2006-07-17 | English | Simulation of Membrane-photobioreactor for Carbon Dioxide Removal by Microalgal Photosynthesis |
| 263 | SAE/TP 2006-01-2073-2006 | 2006-07-17 | English | Effect of Storage on the Physicochemical Properties of a Sweetpotato Beverage Produced Through Centrifugation |
| 264 | SAE/TP 2006-01-2072-2006 | 2006-07-17 | English | Identification of Volatile Organic Compounds from Model Sweetpotato Products Using Different Analytical Methods |
| 265 | SAE/TP 2006-01-2071-2006 | 2006-07-17 | English | Trade Study for a Mars Surface Mission Bulk Commodity Supply Scenario: Processed Peanut Oil Versus Bulk Oil |
| 266 | SAE/TP 2006-01-2068-2006 | 2006-07-17 | English | Physicochemical Properties and Consumer Acceptance of Hydroponic Carrots (Daucus carota) in an Extended Screening Process |
| 267 | SAE/TP 2006-01-2067-2006 | 2006-07-17 | English | Metric Evaluation of Food Packaging Scenarios Intended for a Mars Surface Mission |
| 268 | SAE/TP 2006-01-2066-2006 | 2006-07-17 | English | A Modest Proposal: The Use of the International Space Station as the Crew Exploration Vehicle |
| 269 | SAE/TP 2006-01-2065-2006 | 2006-07-17 | English | Intelligent Flexible Materials for Deployable Space Structures (InFlex) |
| 270 | SAE/TP 2006-01-2064-2006 | 2006-07-17 | English | Self-Deployable Foam Antenna Structures for Earth Observation Radiometer Applications |
| 271 | SAE/TP 2006-01-2063-2006 | 2006-07-17 | English | The Applicability of Past Innovative Concepts to the Technology for New Extremely Large Space Antenna/Telescope Structures |
| 272 | SAE/TP 2006-01-2048-2006 | 2006-07-17 | English | Analysis to Characterize Fresh vs. Aged Shuttle Orbiter Lithium Hydroxide Performance |
| 273 | SAE/TP 2006-01-2047-2006 | 2006-07-17 | English | A Robotic System as an Alternative to the Air-Bearing System for Spacecraft Simulator |
| 274 | SAE/TP 2006-01-2046-2006 | 2006-07-17 | English | On the Design and Control of a New Generation of Reconfigurable Space Manipulators with Passive Joints |
| 275 | SAE/TP 2006-01-2045-2006 | 2006-07-17 | English | Automated Payload and Instruments for European Exploration Related Activities |
| 276 | SAE/TP 2006-01-2044-2006 | 2006-07-17 | English | GOCE Instrument Thermal Control |
| 277 | SAE/TP 2006-01-2043-2006 | 2006-07-17 | English | Some Aspects of Peltier-Cooler Optimization Applied for the Glove Box Air Temperature Control |
| 278 | SAE/TP 2006-01-2042-2006 | 2006-07-17 | English | Preliminary Thermal Design of the Extreme Ultra Violet Spectrometer (EUS) Instrument for Solar Orbiter |
| 279 | SAE/TP 2006-01-2041-2006 | 2006-07-17 | English | Proteus Small-Sat Family: Multi-Mission Thermal Control Design and Performances |
| 280 | SAE/TP 2006-01-2040-2006 | 2006-07-17 | English | Heat Transfer in Film-Cooled Bipropellant Thruster |
| 281 | SAE/TP 2006-01-2039-2006 | 2006-07-17 | English | Thermal Design and On-Orbit Performance of the TopSat Camera |
| 282 | SAE/TP 2006-01-2038-2006 | 2006-07-17 | English | Design and Fabrication of a Passive Deployable/Stowable Radiator |
| 283 | SAE/TP 2006-01-2037-2006 | 2006-07-17 | English | A Porous Media-Based Heat Exchanger: Experimental Measurements of Moisture Condensation |
| 284 | SAE/TP 2006-01-2013-2006 | 2006-07-17 | English | Evolution of Life Support from Apollo, Shuttle, and ISS to the Vision for the Moon and Mars |
| 285 | SAE/TP 2006-01-2012-2006 | 2006-07-17 | English | Development of Water Treatment Systems for Use on NASA Crew Exploration Vehicle (CEV) and Lunar Surface Access Module (LSAM) |
| 286 | SAE/TP 2006-01-2201-2006 | 2006-07-17 | English | Innovative Schematic Concept Analysis for a Space Suit Portable Life Support Subsystem |
| 287 | SAE/TP 2006-01-2011-2006 | 2006-07-17 | English | Crew Exploration Vehicle Environmental Control and Life Support Development Status |
| 288 | SAE/TP 2006-01-2009-2006 | 2006-07-17 | English | Commercialization of Silica-Titania Composites, a NASA Gray Water Post-Processor Technology, for Terrestrial Applications |
| 289 | SAE/TP 2006-01-3071-2006 | 2006-07-09 | English | Study on Main Engine Start for More Electric Architecture Aircraft |
| 290 | SAE/TP 2006-01-2315-2006 | 2006-07-04 | English | Human Modeling in the Product Lifecycle Management of the Boeing 787 Dreamliner |
| 291 | SAE AS1368B-2006 | 2006-07-01(R 2013) | English | FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING |
| 292 | SAE AMS4328A-2006 | 2006-07-01(R 2013) | English | Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged - UNS A92397 |
| 293 | SAE AS1369B-2006 | 2006-07-01(R 2013) | English | FITTING, PLUG, FLARED TUBE, FOR SEAL RING |
| 294 | SAE AS1251C-2006 | 2006-07-01(R 2013) | English | FITTING, UNION, FLARED TUBE, FOR SEAL RING |
| 295 | SAE AS1100C-2006 | 2006-07-01(R 2013) | English | FITTING, UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING |
| 296 | SAE AS4318A-2006 | 2006-07-01(R 2013) | English | FITTING, ADAPTER, FLARED TUBE, .375 BULKHEAD TO BOSS FOR SEAL RING |
| 297 | SAE AS9014-2006 | 2006-07-01(R 2013) | English | Americas Aerospace Quality Group (AAQG) Requirements for Aerospace Quality Management System Certification/Registrations Programs |
| 298 | SAE AMS-S-7108A-2006 | 2006-07-01(R 2011) | English | Steel, Alloy (Manganese-Silicon-Nickel), Bars and Forging Stock (Aircraft Quality) |
| 299 | SAE ARP5918-2006 | 2006-07-01(R 2011) | English | Standard Test Criteria for Aircraft Refuelers |
| 300 | SAE AMS-S-7108A-2006 | 2006-07-01 | English | Steel, Alloy (Manganese-Silicon-Nickel), Bars and Forging Stock (Aircraft Quality) |
| 301 | SAE AMS5210C-2006 | 2006-07-01 | English | Steel Castings, Investment, Electrical Induction Melted, Annealed |
| 302 | SAE AS1100C-2006 | 2006-07-01 | English | FITTING, UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING |
| 303 | SAE ARP891B-2006 | 2006-07-01 | English | Determination of Aluminum Alloy Tempers Through Electrical Conductivity Measurement (Eddy Current) - : 2003
DoD Adopted |
| 304 | SAE J1709-2006 | 2006-07-01 | English | European Brake Fluid Technology |
| 305 | SAE AS9294A-2006 | 2006-07-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A
DoD Adopted |
| 306 | SAE AS9296A-2006 | 2006-07-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
DoD Adopted |
| 307 | SAE AS9297A-2006 | 2006-07-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A
DoD Adopted |
| 308 | SAE AS123301 THRU AS123450A-2006 | 2006-07-01 | English | (R) RIVET, SOLID, UNIVERSAL HEAD, NICKEL ALLOY UNS N06600
DoD Adopted |
| 309 | SAE J301-2006 | 2006-07-01 | English | Effective Dates of New or Revised Technical Reports |
| 310 | SAE AS4318A-2006 | 2006-07-01 | English | FITTING, ADAPTER, FLARED TUBE, .375 BULKHEAD TO BOSS FOR SEAL RING |
| 311 | SAE AS9292A-2006 | 2006-07-01 | English | (R) SCREW, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1380-40 UNJF-3A
DoD Adopted |
| 312 | SAE J356-2006 | 2006-07-01 | English | Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading
DoD Adopted |
| 313 | SAE J1491-2006 | 2006-07-01 | English | (R) Vehicle Acceleration Measurement |
| 314 | SAE AMS4328A-2006 | 2006-07-01 | English | Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged - UNS A92397 |
| 315 | SAE AS9101C-2006 | 2006-07-01 | English | Quality Management Systems Assessment - Remains Current |
| 316 | SAE AS1251C-2006 | 2006-07-01 | English | FITTING, UNION FLARED TUBE, FOR SEAL RING |
| 317 | SAE ARP5918-2006 | 2006-07-01 | English | Standard Test Criteria for Aircraft Refuelers |
| 318 | SAE J1765-2006 | 2006-07-01 | English | SAE Miniature Bulb Vibration Test |
| 319 | SAE AS9014-2006 | 2006-07-01 | English | Americas Aerospace Quality Group (AAQG) Requirements for Aerospace Quality Management System Certification/Registrations Programs |
| 320 | SAE AMS6445G-2006 | 2006-07-01 | English | Steel, Bars, Forgings, and Tubing 1.05Cr - 1.1Mn (0.92 - 1.02C) (Modified 51100) Consumable Electrode Vacuum Melted - UNS K22097 |
| 321 | SAE AMS6446E-2006 | 2006-07-01 | English | Steel, Bars, Forgings, and Tubing 1.0Cr (0.98 - 1.10C) (SAE 51100) Electroslag Remelted - UNS G51986 |
| 322 | SAE AS1368B-2006 | 2006-07-01 | English | FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING |
| 323 | SAE AS1369B-2006 | 2006-07-01 | English | FITTING, PLUG, FLARED TUBE, FOR SEAL RING |
| 324 | SAE AMS5737P-2006 | 2006-06-01(R 2018) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1650 °F (899 °C) Solution and Precipitation Heat Treated - UNS S66286 |
| 325 | SAE AMS5734K-2006 | 2006-06-01(R 2018) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1650 °F (899 °C) Solution Heat Treated - UNS S66286 |
| 326 | SAE AMS5731L-2006 | 2006-06-01(R 2018) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1800 °F (982 °C) Solution Heat Treated - UNS S66286 |
| 327 | SAE AMS5737P-2006 | 2006-06-01(R 2018) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1650 °F (899 °C) Solution and Precipitation Heat Treated - UNS S66286 |
| 328 | SAE AMS5342E-2006 | 2006-06-01(R 2014) | English | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) - UNS J91280 and UNS J92200(DoD Adopted) |
| 329 | SAE AMS5346C-2006 | 2006-06-01(R 2014) | English | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5) - UNS J92110 |
| 330 | SAE AMS5347B-2006 | 2006-06-01(R 2014) | English | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5) - UNS J92110(DoD Adopted) |
| 331 | SAE AMS2759/10A-2006 | 2006-06-01(R 2014) | English | Automated Gaseous Nitriding Controlled by Nitriding Potential |
| 332 | SAE AS51989A-2006 | 2006-06-01(R 2014) | English | Stud, Locked In-Ring Locked, Serrated(DoD Adopted) |
| 333 | SAE AS18280/2A-2006 | 2006-06-01(R 2013) | English | Sleeves, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi |
| 334 | SAE AS5793-2006 | 2006-06-01(R 2013) | English | FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC |
| 335 | SAE AS5864-2006 | 2006-06-01(R 2013) | English | FITTING END, BULKHEAD, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD |
| 336 | SAE AS5863-2006 | 2006-06-01(R 2013) | English | FITTING END, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD |
| 337 | SAE AS5188A-2006 | 2006-06-01(R 2013) | English | FITTING, ELBOW, 90 DEGREES, BULKHEAD, HOSE |
| 338 | SAE AMS5737P-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1650 °F (899 °C) Solution and Precipitation Heat Treated - UNS S66286 |
| 339 | SAE AS5443A-2006 | 2006-06-01(R 2012) | English | WRENCHING ELEMENT, SPLINE DRIVE - DIMENSIONS FOR |
| 340 | SAE AMS5780E-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Welding Wire 15.5Cr - 4.5Ni - 2.9Mo - 0.10N - UNS S35500
DoD Adopted |
| 341 | SAE AMS5788F-2006 | 2006-06-01(R 2012) | English | Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C - UNS R30006
DoD Adopted |
| 342 | SAE AMS5731L-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1800 °F (982 °C) Solution Heat Treated - UNS S66286 |
| 343 | SAE AMS5853C-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 °F (982 °C) Solution Treated and Work-Strengthened 160 ksi (1103 MPa) Tensile Strength - UNS S66286 |
| 344 | SAE AMS5860F-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable - UNS S45500
DoD Adopted |
| 345 | SAE AMS5591K-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Tubing, Seamless 12.5Cr (SAE 51410) Annealed - UNS S41000 |
| 346 | SAE AMS5636F-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength - UNS S30200
DoD Adopted |
| 347 | SAE AMS5700F-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed - UNS S66009 |
| 348 | SAE J2724-2006 | 2006-06-01(R 2012) | English | Measurement of Disc Brake Friction Material Underlayer Distribution |
| 349 | SAE AMS5632H-2006 | 2006-06-01(R 2012) | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440F) Free-Machining, Annealed - UNS S44020 (Type I) or UNS S44023 (Type II)
DoD Adopted |
| 350 | SAE AMS4279B-2006 | 2006-06-01(R 2011) | English | Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 Flat Sheet) Solution Heat Treated, High Formability - UNS A82024 |
| 351 | SAE AMS2451/2A-2006 | 2006-06-01(R 2011) | English | Plating, Brush, Nickel Low Stress, Hard Deposit |
| 352 | SAE AS5506/1-2006 | 2006-06-01(R 2011) | English | SAE Architecture Analysis and Design Language (AADL) Annex Volume 1: Annex A: Graphical AADL Notation, Annex C: AADL Meta-Model and Interchange Formats, Annex D: Language Compliance and Application Program Interface Annex E: Error Model Annex |
| 353 | SAE AMS2670J-2006 | 2006-06-01(R 2011) | English | Brazing, Copper |
| 354 | SAE ARP1110B-2006 | 2006-06-01(R 2011) | English | Minimizing Stress Corrosion Cracking in Wrought Forms of Steels and Corrosion Resistant Steels and Alloys |
| 355 | SAE AMS7848C-2006 | 2006-06-01(R 2010) | English | Tantalum Alloy, Bars and Rods 90Ta - 10W - UNS R05255 |
| 356 | SAE J928-2006 | 2006-06-01(R 2010) | English | Electrical Terminals鈥擯in and Receptacle Type
DoD Adopted |
| 357 | SAE AMS7847C-2006 | 2006-06-01(R 2010) | English | Tantalum Alloy Sheet, Strip, and Plate 90Ta - 10W - UNS R05255 |
| 358 | SAE AMS7849D-2006 | 2006-06-01(R 2010) | English | Tantalum Sheet, Strip, and Plate Annealed - UNS R05210 |
| 359 | SAE AMS5530G-2006 | 2006-06-01(R 2006) | English | Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated |
| 360 | SAE AMS4388F-2006 | 2006-06-01 | English | Magnesium Alloy Extrusions 3.0Th - 1.5Mn (HM31A-F) As Extruded
DoD Adopted |
| 361 | SAE AMS4390K-2006 | 2006-06-01 | English | Sheet and Plate, Magnesium Alloy 2.0Th - 0.78Mn (HM21A-T8) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated |
| 362 | SAE ARP1110B-2006 | 2006-06-01 | English | Minimizing Stress Corrosion Cracking in Wrought Forms of Steels and Corrosion Resistant Steels and Alloys |
| 363 | SAE AMS4279B-2006 | 2006-06-01 | English | Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 Flat Sheet) Solution Heat Treated, High Formability - UNS A82024 |
| 364 | SAE AS5793-2006 | 2006-06-01 | English | FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC
DoD Adopted |
| 365 | SAE AMS5734K-2006 | 2006-06-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1650 °F (899 °C) Solution Heat Treated - UNS S66286 |
| 366 | SAE AS27260A-2006 | 2006-06-01 | English | Tie Down, Cargo, Aircraft, CGU-1/B |
| 367 | SAE AS25959A-2006 | 2006-06-01 | English | Tie Downs, Cargo, Aircraft |
| 368 | SAE AMS5731L-2006 | 2006-06-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1800 掳F (982 掳C) Solution Heat Treated - UNS S66286
DoD Adopted |
| 369 | SAE AMS5734K-2006 | 2006-06-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted, 1650 Degrees F (899 Degrees C) Solution Heat Treated - UNS S66286
DoD Adopted |
| 370 | SAE AS26780A-2006 | 2006-06-01 | English | Tie Down, Cargo, Aircraft, Nylon Web Net |
| 371 | SAE J2592-2006 | 2006-06-01 | English | Carbon Steel Tubing for General Use Understanding Nondestructive Testing for Carbon Steel Tubing |
| 372 | SAE AMS6439C-2006 | 2006-06-01 | English | Steel Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) (D6AC) Consumable Electrode Vacuum Melted, Annealed - UNS K24728
DoD Adopted |
| 373 | SAE ARP4822-2006 | 2006-06-01 | English | Night Vision Imaging System (NVIS) Compatible Illuminated Pushbutton Switches and Indicators |
| 374 | SAE AS81936A-2006 | 2006-06-01 | English | (R) Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race) General Specification For
DoD Adopted |
| 375 | SAE AS7461B-2006 | 2006-06-01 | English | Bolts and Screws, Titanium Alloy 6Al-4V, UNS R56400 Fatigue-Rated, Procurement Specification For
DoD Adopted |
| 376 | SAE AMS5737P-2006 | 2006-06-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1650 Degrees F (899 Degrees C) Solution and Precipitation Heat Treated - UNS S66286
DoD Adopted |
| 377 | SAE AS51989A-2006 | 2006-06-01 | English | Stud, Locked In-Ring Locked, Serrated
DoD Adopted |
| 378 | SAE AMS5860F-2006 | 2006-06-01 | English | Steel, Corrosion Resistant, Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Multiple Melted, Solution Heat Treated, Precipitation Hardenable - UNS S45500
DoD Adopted |
| 379 | SAE MA2111C-2006 | 2006-06-01 | English | Fitting Assembly, Adapter Ring Locked Port Connection to 8 Degrees 30' Beam Seal 28 000 kPa, Metric |
| 380 | SAE AS115801 THRU AS115850B-2006 | 2006-06-01 | English | SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .1900-32 UNF-3A
DoD Adopted |
| 381 | SAE AMS5853C-2006 | 2006-06-01 | English | Steel, Corrosion and Heat Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V Consumable Electrode Melted 1800 Degrees F (982 Degrees C) Solution Treated and Work-Strengthened 160 ksi (1103 MPa) Tensile Strength - UNS S66286 |
| 382 | SAE AS116913 THRU AS116924A-2006 | 2006-06-01 | English | (R) SCREW - OVAL FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS K00802, .1120-40 UNC - 2A
DoD Adopted |
| 383 | SAE AS9285A-2006 | 2006-06-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
DoD Adopted |
| 384 | SAE AIR822B-2006 | 2006-06-01 | English | Oxygen Systems for General Aviation |
| 385 | SAE AMS5780E-2006 | 2006-06-01 | English | Steel, Corrosion and Heat Resistant, Welding Wire 15.5Cr - 4.5Ni - 2.9Mo - 0.10N - UNS S35500
DoD Adopted |
| 386 | SAE AS9284A-2006 | 2006-06-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
DoD Adopted |
| 387 | SAE AS9283A-2006 | 2006-06-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A
DoD Adopted |
| 388 | SAE J18-2006 | 2006-06-01 | English | Sponge and Expanded Cellular Rubber Products |
| 389 | SAE AMS2670J-2006 | 2006-06-01 | English | Brazing, Copper |
| 390 | SAE AMS2759/10A-2006 | 2006-06-01 | English | Automated Gaseous Nitriding Controlled by Nitriding Potential |
| 391 | SAE AMS5636F-2006 | 2006-06-01 | English | Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength - UNS S30200
DoD Adopted |
| 392 | SAE J20-2006 | 2006-06-01 | English | Coolant System Hoses
DoD Adopted |
| 393 | SAE AMS5700F-2006 | 2006-06-01 | English | Steel, Corrosion and Heat Resistant, Bars, Forgings, and Rings 13.5Cr - 13.5Ni - 0.35Mo - 2.2W Annealed |
| 394 | SAE AMS4279B-2006 | 2006-06-01 | English | Aluminum Alloy, Alclad Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4 Flat Sheet) Solution Heat Treated, High Formability - UNS A82024 |
| 395 | SAE AS5395-2006 | 2006-06-01 | English | Health and Usage Monitoring System Data Interchange Specification |
| 396 | SAE AMS5632H-2006 | 2006-06-01 | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440F) Free-Machining, Annealed - UNS S44020 (Type I) or UNS S44023 (Type II)
DoD Adopted |
| 397 | SAE J2295M-2006 | 2006-06-01 | English | FastenersPart StandardCap Screws, Hex Bolts, and Hex Nuts (Metric)
DoD Adopted |
| 398 | SAE AMS6396D-2006 | 2006-06-01 | English | Steel Sheet, Strip, and Plate 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed - UNS K22950
DoD Adopted |
| 399 | SAE AS5863-2006 | 2006-06-01 | English | FITTING END, 24掳 CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD |
| 400 | SAE AS15532-2006 | 2006-06-01 | English | Data Word and Message Formats |
| 401 | SAE AS5395-2006 | 2006-06-01 | English | Health and Usage Monitoring System Data Interchange Specification |
| 402 | SAE AMS6413K-2006 | 2006-06-01 | English | Steel, Mechanical Tubing 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (SAE 4337) - UNS G43370 |
| 403 | SAE AS5864-2006 | 2006-06-01 | English | FITTING END, BULKHEAD, 24掳 CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD |
| 404 | SAE AMS6421E-2006 | 2006-06-01 | English | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B (0.35 - 0.40C) (Modified 98B37)
DoD Adopted |
| 405 | SAE J20-2006 | 2006-06-01 | English | Coolant System Hoses |
| 406 | SAE AMS2670J-2006 | 2006-06-01 | English | Brazing, Copper |
| 407 | SAE J2724-2006 | 2006-06-01 | English | Measurement of Disc Brake Friction Material Underlayer Distribution |
| 408 | SAE AMS6422H-2006 | 2006-06-01 | English | Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40) - UNS K11940
DoD Adopted |
| 409 | SAE J528-2006 | 2006-06-01 | English | Seamless Copper Tube |
| 410 | SAE AS5443A-2006 | 2006-06-01 | English | WRENCHING ELEMENT, SPLINE DRIVE - DIMENSIONS FOR |
| 411 | SAE AS5188A-2006 | 2006-06-01 | English | Fitting, Elbow, 90 Degrees, Bulkhead, Hose
DoD Adopted |
| 412 | SAE AMS5342E-2006 | 2006-06-01 | English | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) - UNS J91280 and UNS J92200
DoD Adopted |
| 413 | SAE AMS5347B-2006 | 2006-06-01 | English | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5) - UNS J92110
DoD Adopted |
| 414 | SAE AMS5503E-2006 | 2006-06-01 | English | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 17Cr (SAE 51430) Annealed - UNS S43000
DoD Adopted |
| 415 | SAE AMS5346C-2006 | 2006-06-01 | English | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5) - UNS J92110 |
| 416 | SAE AS9286A-2006 | 2006-06-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A
DoD Adopted |
| 417 | SAE J2664-2006 | 2006-06-01 | English | Trailer Sway Response Test Procedure |
| 418 | SAE AMS4425C-2006 | 2006-06-01 | English | Magnesium Alloy Castings, Sand 5.8Zn - 2.5RE - 0.70Zr (ZE63-T6) Solution and Precipitation Heat Treated |
| 419 | SAE AMS4114H-2006 | 2006-06-01 | English | Aluminum Alloy Bars and Rods, Rolled or Cold-Finished 2.5Mg - 0.25Cr (5052-F) As Fabricated - UNS A95052 |
| 420 | SAE AMS5591K-2006 | 2006-06-01 | English | Steel, Corrosion and Heat-Resistant, Tubing, Seamless 12.5Cr (SAE 51410) Annealed - UNS S41000
DoD Adopted |
| 421 | SAE AMS6350K-2006 | 2006-06-01 | English | Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) - UNS G41300
DoD Adopted |
| 422 | SAE AMS-S-6049B-2006 | 2006-06-01 | English | Steel, Chrome-Nickel-Molybdenum (8740) Bars and Reforging Stock (Aircraft Quality) |
| 423 | SAE AMS-S-18728B-2006 | 2006-06-01 | English | Steel Plate, Sheet and Strip, Alloy 8630, Aircraft Quality |
| 424 | SAE AMS6351G-2006 | 2006-06-01 | English | Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized - UNS G41300
DoD Adopted |
| 425 | SAE AMS4005D-2006 | 2006-06-01 | English | Aluminum Alloy Foil 5.0Mg - 0.12Mn - 0.12Cr (5056-H191) Strain Hardened - UNS A95056 |
| 426 | SAE AMS6357J-2006 | 2006-06-01 | English | Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) - Composition Similar to UNS G87350 |
| 427 | SAE AMS6358H-2006 | 2006-06-01 | English | Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) - UNS G87400
DoD Adopted |
| 428 | SAE ARP4084A-2006 | 2006-06-01 | English | Aircraft Ground Service Connections Locations and Type |
| 429 | SAE AMS4419C-2006 | 2006-06-01 | English | Magnesium Alloy Castings, Sand 2.5Ag - 1.1Th - 1.0Di - 0.70Zr (QH21-T6) Solution and Precipitation Heat Treated |
| 430 | SAE AMS5897B-2006 | 2006-06-01 | English | Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (SAE 30347) Solution Heat Treated and Cold Drawn, One- Eighth Hard Temper - UNS S34700
DoD Adopted |
| 431 | SAE AS4301B-2006 | 2006-06-01 | English | FITTING, ADAPTER, CONICAL END TO FLARED TUBE REDUCER FOR SEAL RING |
| 432 | SAE AS5929-2006 | 2006-06-01 | English | BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED O.D., INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH |
| 433 | SAE GEIA-HB-0005-1-2006 | 2006-06-01 | English | Program Management/Systems Engineering Guidelines For Managing The Transition To Lead-Free Electronics - Formerly TechAmerica GEIA-HB-0005-1 |
| 434 | SAE AS4307B-2006 | 2006-06-01 | English | FITTING, FLARED TUBE, EXTERNAL STRAIGHT THREAD FOR SEAL RING |
| 435 | SAE AS4308B-2006 | 2006-06-01 | English | FITTING, BUSHING-SCREW THREAD EXPANDER FOR SEAL RING |
| 436 | SAE AMS6476C-2006 | 2006-06-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.12Mo (0.89 - 1.01C) - UNS K19526
DoD Adopted |
| 437 | SAE AS4328B-2006 | 2006-06-01 | English | FITTING, UNION, REDUCER, BULKHEAD, FLARED TUBE, FOR SEAL RING |
| 438 | SAE AMS2451/2A-2006 | 2006-06-01 | English | Plating, Brush, Nickel Low Stress, Hard Deposit |
| 439 | SAE AS18280/2A-2006 | 2006-06-01 | English | (R) Sleeves, Internally or Externally Swaged or Welded, 24 Degrees Cone Flareless Fitting, 3000 psi |
| 440 | SAE AS85049/42A-2006 | 2006-06-01 | English | Connector Accessories, Electrical, Nonenvironmental, Strain Relief, Straight, Category 4A (for MIL-C-5015 Solder Type, V Thread of MS310X Classes A, B, C or K Connectors)
DoD Adopted |
| 441 | SAE AS4340B-2006 | 2006-06-01 | English | FITTING, BUSHING, SCREW THREAD REDUCER, FOR SEAL RING |
| 442 | SAE AMS4438E-2006 | 2006-06-01 | English | Magnesium Alloy Castings, Sand 5.7Zn - 1.8Th (ZH62A-T5) Precipitation Heat Treated |
| 443 | SAE AS4317B-2006 | 2006-06-01 | English | FITTING, REDUCER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING |
| 444 | SAE AMS4445G-2006 | 2006-06-01 | English | Magnesium Alloy Castings, Sand 3.3Th - 0.7Zr (HK31A-T6) Solution and Precipitation Heat Treated |
| 445 | SAE AMS5788F-2006 | 2006-06-01 | English | Cobalt Alloy, Corrosion and Heat Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C - UNS R30006
DoD Adopted |
| 446 | SAE AMS4447F-2006 | 2006-06-01 | English | Magnesium Alloy Castings, Sand 3.3Th - 2.1Zn - 0.75Zr (HZ32A-T5) Precipitation Heat Treated |
| 447 | SAE AS5506/1-2006 | 2006-06-01 | English | SAE Architecture Analysis and Design Language (AADL) Annex Volume 1: Annex A: Graphical AADL Notation, Annex C: AADL Meta-Model and Interchange Formats, Annex D: Language Compliance and Application Program Interface Annex E: Error Model Annex |
| 448 | SAE AS5452A-2006 | 2006-06-01 | English | Night Vision Goggles (NVG) Compatible Lighting for Civil Aircraft |
| 449 | SAE AS4319B-2006 | 2006-06-01 | English | FITTING, EXPANDER, ADAPTER, FLARED TUBE TO BOSS FOR SEAL RING |
| 450 | SAE AMS5617J-2006 | 2006-05-20 | English | Steel Bars, Wire, and Forgings, Corrosion Resistant 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S45500
DoD Adopted |
| 451 | SAE AMS5343E-2006 | 2006-05-01(R 2014) | English | Steel, Corrosion-Resistant, Investmment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4) - UNS J92200; UNS J92180(DoD Adopted) |
| 452 | SAE ARP5943-2006 | 2006-05-01(R 2013) | English | Snowplows and Hitches |
| 453 | SAE AS9568D-2006 | 2006-05-01(R 2012) | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .3750-24 UNJF-3A |
| 454 | SAE AS9697C-2006 | 2006-05-01(R 2012) | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A |
| 455 | SAE AMS5808C-2006 | 2006-05-01(R 2012) | English | Steel, Corrosion and Heat-Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled
DoD Adopted |
| 456 | SAE AIR5883-2006 | 2006-05-01(R 2012) | English | Landing Gear Shock Struts Bearing Selection |
| 457 | SAE AMS5866D-2006 | 2006-05-01(R 2012) | English | Steel, Corrosion-Resistant, Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper - UNS S30200
DoD Adopted |
| 458 | SAE AMS5580K-2006 | 2006-05-01(R 2012) | English | Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe Annealed - UNS N06600
DoD Adopted |
| 459 | SAE AMS5714D-2006 | 2006-05-01(R 2012) | English | Alloy Bars, Forgings, and Rings, Corrosion and Heat-Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation-Hardenable - UNS N07722 |
| 460 | SAE AMS2451/3A-2006 | 2006-05-01(R 2011) | English | Plating, Brush, Nickel Low Stress, Low-Hardness Deposit |
| 461 | SAE AMS4247B-2006 | 2006-05-01(R 2011) | English | Aluminum Alloy, Hand Forgings 7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T7352) Solution Heat Treated, Stress Relieved by Compression, and Precipitation Heat Treated - UNS A97049 |
| 462 | SAE AMS2451/1A-2006 | 2006-05-01(R 2011) | English | Plating, Brush, Nickel General Purpose |
| 463 | SAE AMS4144F-2006 | 2006-05-01(R 2011) | English | Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated - UNS A92219
DoD Adopted |
| 464 | SAE AMS2451/7A-2006 | 2006-05-01(R 2011) | English | Plating, Brush, Nickel Low Stress, Medium-Hardness Deposit |
| 465 | SAE AMS2451/6A-2006 | 2006-05-01(R 2011) | English | Plating, Brush, Copper General Purpose |
| 466 | SAE AMS2451/5A-2006 | 2006-05-01(R 2011) | English | Plating, Brush, Chromium Hard Deposit, Trivalent
DoD Adopted |
| 467 | SAE AMS2451/8A-2006 | 2006-05-01(R 2011) | English | Plating, Brush, Non-Cyanide Silver General Purpose |
| 468 | SAE AMS4329A-2006 | 2006-05-01(R 2011) | English | Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged - UNS A97085 |
| 469 | SAE AMS6373G-2006 | 2006-05-01(R 2010) | English | Steel, Welded Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) - UNS G41300
DoD Adopted |
| 470 | SAE AMS2434C-2006 | 2006-05-01(R 2010) | English | Plating, Tin-Zinc Alloy
DoD Adopted |
| 471 | SAE AMS6281J-2006 | 2006-05-01(R 2010) | English | Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630) - UNS G86300 |
| 472 | SAE AMS5010K-2006 | 2006-05-01(R 2010) | English | Steel Bars Free-Machining Cold Drawn (SAE 1212 or SAE 1215) - UNS G12120 |
| 473 | SAE AMS6282J-2006 | 2006-05-01(R 2010) | English | Steel Tubing, Mechanical 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) - UNS G87350
DoD Adopted |
| 474 | SAE AMS5040M-2006 | 2006-05-01(R 2010) | English | Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade - UNS G10100
DoD Adopted |
| 475 | SAE AMS6375C-2006 | 2006-05-01(R 2010) | English | Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging - UNS G86200
DoD Adopted |
| 476 | SAE AMS5034A-2006 | 2006-05-01(R 2010) | English | Steel, Welding Wire 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) - UNS G41300 |
| 477 | SAE AMS2269F-2006 | 2006-05-01 | English | Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys |
| 478 | SAE J1671-2006 | 2006-05-01 | English | Outboard Mounted Brake Drum/Disc Wheel Hub Interface DimensionsTruck and Bus |
| 479 | SAE J2295-2006 | 2006-05-01 | English | Fastener Part Standard - Caps Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)
DoD Adopted |
| 480 | SAE AMS2263E-2006 | 2006-05-01 | English | Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Tubing |
| 481 | SAE AIR1412B-2006 | 2006-05-01 | English | (R) Designing for Long Life With Elastomers |
| 482 | SAE AMS4329A-2006 | 2006-05-01 | English | Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged - UNS A97085 |
| 483 | SAE J2760-2006 | 2006-05-01 | English | Pressure Terminology Used In Fuel Cells and Other Hydrogen Vehicle Applications
DoD Adopted |
| 484 | SAE AIR4272A-2006 | 2006-05-01 | English | Power Controllers: Signal Interface Applications and Considerations |
| 485 | SAE AMS2269F-2006 | 2006-05-01 | English | Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys
DoD Adopted |
| 486 | SAE AMS5618G-2006 | 2006-05-01 | English | Steel, Corrosion Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) Consumable Electrode Vacuum Melted - UNS S44004
DoD Adopted |
| 487 | SAE AS9568D-2006 | 2006-05-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CRES UNS S66286, 130 KSI MIN .3750-24 UNJF-3A
DoD Adopted |
| 488 | SAE AMS5714D-2006 | 2006-05-01 | English | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 73Ni - 15.5Cr - 2.5Ti - 0.70Al - 7.0Fe Precipitation Hardenable - UNS N07722 |
| 489 | SAE AMS7903B-2006 | 2006-05-01 | English | Beryllium Bars, Rods, Tubing, and Shapes 4.25BeO - 94Be High Micro-Yield Strength |
| 490 | SAE AS21922B-2006 | 2006-05-01 | English | SLEEVE, COUPLING, FLARELESS
DoD Adopted |
| 491 | SAE AMS5870D-2006 | 2006-05-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al Solution Heat Treated - UNS N06601 |
| 492 | SAE AMS5398F-2006 | 2006-05-01 | English | Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22(Cb + Ta) - 2.8Cu Solution Heat Treated - UNS J92200
DoD Adopted |
| 493 | SAE AMS4029K-2006 | 2006-05-01 | English | Aluminum Alloy Sheet and Plate (2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated - UNS A92014
DoD Adopted |
| 494 | SAE AMS5880C-2006 | 2006-05-01 | English | Steel, Corrosion Resistant, Bars, Wire, Forgings, and Wire 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) for Bearing Applications - UNS S44004
DoD Adopted |
| 495 | SAE AMS4134E-2006 | 2006-05-01 | English | Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat Treated - UNS A92014
DoD Adopted |
| 496 | SAE ARP4258A-2006 | 2006-05-01 | English | Application of Low Speed Avionic System Discrete Signal Interfaces |
| 497 | SAE AMS2263E-2006 | 2006-05-01 | English | Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Tubing |
| 498 | SAE AMS5868B-2006 | 2006-05-01 | English | Steel, Corrosion Resistant, Seamless and Welded Aircraft Tubing 19Cr - 9.5Ni (SAE 30304) Cold Drawn, 1/2 Hard Temper - UNS S30400 |
| 499 | SAE AMS4144F-2006 | 2006-05-01 | English | Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated (UNS A92219)
DoD Adopted |
| 500 | SAE AMS5866D-2006 | 2006-05-01 | English | Steel, Corrosion Resistant, Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper - UNS S30200
DoD Adopted |
|