| Pos | standard Number | publication date | Language | Description |
| 1 | SAE J2244/2-2007 | 2007-12-01 | English | Connections for FLuid Power and General Use鈥?Ports and Stud Ends with ISO 261 Threads and O-Ring Sealing Part 2: Heavy-Duty (S Series) Stud Ends鈥?Dimensions, Design, Test Methods, and Requirements
DoD Adopted |
| 2 | SAE J377-2007 | 2007-12-01 | English | Vehicular Traffic Sound Signaling Devices (Horns) |
| 3 | SAE AS7205-2007 | 2007-12-01 | English | Spring Pins, Tubular, Carbon Steel, Procurement Specification for |
| 4 | SAE ARP1820B-2007 | 2007-12-01 | English | Chord Method of Evaluating Surface Microstructural Characteristics
DoD Adopted |
| 5 | SAE AS1814C-2007 | 2007-12-01 | English | Terminology for Titanium Microstructures
DoD Adopted |
| 6 | SAE ARP5435-2007 | 2007-12-01 | English | APU Gas Turbine Engine Test Cell Correlation |
| 7 | SAE J2247-2007 | 2007-12-01 | English | Truck Tractor Power Output for Trailer ABS |
| 8 | SAE AIR5645-2007 | 2007-12-01 | English | JAUS Transport Considerations |
| 9 | SAE J524-2007 | 2007-12-01 | English | Seamless Low-Carbon Steel Tubing Annealed for Bending and Flaring
DoD Adopted |
| 10 | SAE J267-2007 | 2007-12-01 | English | Wheels/Rims鈥擯erformance Requirements and Test Procedures鈥擳ruck and Bus
DoD Adopted |
| 11 | SAE AMS-T-6735B-2007 | 2007-12-01 | English | Tubing, Chrome-Molybdenum, 4135 Steel, Seamless Aircraft Quality
DoD Adopted |
| 12 | SAE AS1424G-2007 | 2007-12-01 | English | (R) Hose Assemblies, Metal, Medium Pressure, High Temperature |
| 13 | SAE AS5767-2007 | 2007-12-01 | English | FITTING ASSEMBLY, TEE, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 14 | SAE AMS2259E-2007 | 2007-12-01 | English | Chemical Check Analysis Limits Wrought Low-Alloy and Carbon Steels
DoD Adopted |
| 15 | SAE AMS4287A-2007 | 2007-12-01 | English | Aluminum Alloy, Extrusion 2.7 Cu - 1.8 Li - 0.7 Zn - 0.3 Mn - 0.3 Mg - 0.08 Zr (2099-T83) Solution Heat Treated, Stress Relieved by Stretching 1% to 4% and Aged - UNS A92099 |
| 16 | SAE AMS-T-6845A-2007 | 2007-12-01 | English | Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition
DoD Adopted |
| 17 | SAE AMS2745A-2007 | 2007-12-01 | English | Induction Hardening of Steel Parts |
| 18 | SAE J845-2007 | 2007-12-01 | English | (R) Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles
DoD Adopted |
| 19 | SAE ARP982D-2007 | 2007-12-01 | English | Minimizing Stress-Corrosion Cracking in Wrought Titanium Alloy Products
DoD Adopted |
| 20 | SAE AS5975A-2007 | 2007-12-01 | English | FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 21 | SAE AMS-S-8949B-2007 | 2007-12-01 | English | Steel Bars, Plates, Sheets, Billets, and Reforging Stock Type D6AC
DoD Adopted |
| 22 | SAE J1330-2007 | 2007-12-01 | English | (R) Photometry Laboratory Accuracy Guidelines |
| 23 | SAE AMS3138D-2007 | 2007-12-01 | English | Coating Materials, Fluorocarbon (FKM) Elastomeric
DoD Adopted |
| 24 | SAE AMS-S-13165A-2007 | 2007-12-01 | English | Shot Peening of Metal Parts |
| 25 | SAE J2012-2007 | 2007-12-01 | English | (R) Diagnostic Trouble Code Definitions - See Also SAE J2012DA |
| 26 | SAE/TP 2007-01-2542-2007 | 2007-11-28 | English | Toward a Stochastic in-flight thrust determination process |
| 27 | SAE/TP 2007-01-2579-2007 | 2007-11-28 | English | THERMODYNAMIC STUDY OF AIRCRAFT AIR CONDITIONING AIR CYCLE MACHINES: 3-WHEEL x 4-WHEEL |
| 28 | SAE/TP 2007-01-2713-2007 | 2007-11-28 | English | COMPUTATIONAL PROGRAM TO SIMULATE THE HEAT FLUX FROM AN INFRARED LAMPS ARRAY |
| 29 | SAE/TP 2007-01-2957-2007 | 2007-11-28 | English | Long Range Aircraft, an Ideal Case for Fuel Cell Power |
| 30 | SAE/TP 2007-01-2807-2007 | 2007-11-28 | English | STUDY OF THE MICROSTRUCTURAL BEHAVIOR OF THE TI-6Al-4V ALLOY IN CREEP TEST AT 600ºC |
| 31 | SAE/TP 2007-01-2849-2007 | 2007-11-28 | English | Damage evolution in thin-walled titanium ducts for use in aircraft pneumatic systems |
| 32 | SAE/TP 2007-01-2684-2007 | 2007-11-28 | English | Investigation of the Ta5Si3 and Cr5Si3 Phases by XRD and SEM for Microstructural Characterizations |
| 33 | SAE/TP 2007-01-2626-2007 | 2007-11-28 | English | Equal Probability Load Conditions in Random Analysis |
| 34 | SAE/TP 2007-01-2692-2007 | 2007-11-28 | English | INFLUENCE OF SHARING BUS ON REAL TIME NETWORKED CONTROL SYSTEM PERFORMANCE |
| 35 | SAE/TP 2007-01-2812-2007 | 2007-11-28 | English | Predicting Fatigue Crack Behavior in Titanium with the use of Statistical Tools |
| 36 | SAE/TP 2007-01-2814-2007 | 2007-11-28 | English | The Oxidation Effect in the Titanium Alloy at High Temperature |
| 37 | SAE/TP 2007-01-2734-2007 | 2007-11-28 | English | Development of a Small Unmanned Air Vehicle |
| 38 | SAE/TP 2007-01-2803-2007 | 2007-11-28 | English | Effects of Pre-Straining of the Behavior of Fatigue Cracks in Al 2524 T3 Alloy |
| 39 | SAE/TP 2007-01-2592-2007 | 2007-11-28 | English | Aviation and Environment: Certification and Tendencies |
| 40 | SAE/TP 2007-01-2744-2007 | 2007-11-28 | English | ACS-100 SORA and its technological innovations: into the future general aviation scenario |
| 41 | SAE/TP 2007-01-2909-2007 | 2007-11-28 | English | Aerodynamic Study of Propellers-Engine Performance for Micro Air Vehicle Design |
| 42 | SAE ARP823E-2007 | 2007-11-01(R 2013) | English | Minimizing Stress-Corrosion Cracking in Wrought Heat-Treatable Aluminum Alloy Products |
| 43 | SAE AMS4411-2007 | 2007-11-01(R 2013) | English | Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged - UNS A97081 |
| 44 | SAE AMS5891B-2007 | 2007-11-01(R 2013) | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Annealed - UNS N06230 |
| 45 | SAE AMS4410-2007 | 2007-11-01(R 2013) | English | Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged - UNS A97081 |
| 46 | SAE AMS4121H-2007 | 2007-11-01(R 2013) | English | Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated - UNS A92014 |
| 47 | SAE AS5491C-2007 | 2007-11-01(R 2013) | English | Calculation of Electron Vacancy Number in Superalloys |
| 48 | SAE AIR5699-2007 | 2007-11-01(R 2013) | English | A Guide for the Damaging Effects of Tire and Wheel Failures |
| 49 | SAE AMS4764F-2007 | 2007-11-01(R 2013) | English | Copper Alloy, Brazing Filler Metal 52.5Cu - 38Mn - 9.5Ni 1615 to 1700 °F (879 to 927 °C) Solidus-Liquidus Range - UNS C69950(DoD Adopted) |
| 50 | SAE J1075-2007 | 2007-11-01(R 2013) | English | Sound Measurement - Construction Site |
| 51 | SAE ARP1631A-2007 | 2007-11-01(R 2012) | English | Manufacturing Sequence for Fabrication of High-Strength Steel Parts 300M or 4340 Modified Low-Alloy Steels 270,000 psi (1860 MPa) Tensile Strength and Higher |
| 52 | SAE J912-2007 | 2007-11-01(R 2012) | English | Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials |
| 53 | SAE AS31971A-2007 | 2007-11-01(R 2012) | English | (R) GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST |
| 54 | SAE AS7928/2B-2007 | 2007-11-01(R 2012) | English | (R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE |
| 55 | SAE AS7928/9-2007 | 2007-11-01(R 2012) | English | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TIN WHISKER RESISTANT FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE |
| 56 | SAE AS21942A-2007 | 2007-11-01 | English | (R) BODY, CLUSTER FITTING, ONE WAY, FLARELESS
DoD Adopted |
| 57 | SAE AIR4766-2007 | 2007-11-01 | English | Air Quality for Commercial Aircraft Cabins |
| 58 | SAE ARP1631A-2007 | 2007-11-01 | English | Manufacturing Sequence for Fabrication of High-Strength Steel Parts 300M or 4340 Modified Low-Alloy Steels 270,000 psi (1860 MPa) Tensile Strength and Higher |
| 59 | SAE ARP4058A-2007 | 2007-11-01 | English | (R) Actuators: Mechanical, Geared Rotary, General Specification For |
| 60 | SAE AIR5699-2007 | 2007-11-01 | English | A Guide for the Damaging Effects of Tire and Wheel Failures |
| 61 | SAE AMS4953E-2007 | 2007-11-01 | English | Titanium Alloy Welding Wire 5Al - 2.5Sn - UNS R54520 |
| 62 | SAE AMS4931C-2007 | 2007-11-01 | English | Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness - UNS R56400
DoD Adopted |
| 63 | SAE AMS-S-7947B-2007 | 2007-11-01 | English | Steel, Sheet and Strip (1095) (Aircraft Quality) |
| 64 | SAE AMS-S-8559B-2007 | 2007-11-01 | English | Steel Bars, Carbon, AISI (1095), Aircraft Quality
DoD Adopted |
| 65 | SAE AMS5891B-2007 | 2007-11-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Annealed - UNS N06230 |
| 66 | SAE J912-2007 | 2007-11-01 | English | Test Method for Determining Blocking Resistance and Associated Characteristics of Automotive Trim Materials |
| 67 | SAE AIR4766-2007 | 2007-11-01 | English | Air Quality for Commercial Aircraft Cabins |
| 68 | SAE J 2641-2007 | 2007-11-01 | English | Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues |
| 69 | SAE AMS6320M-2007 | 2007-11-01 | English | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) - UNS G87350
DoD Adopted |
| 70 | SAE EIA-STD-4899A-2007 | 2007-11-01 | English | Standard for Preparing an Electronic Components Management Plan - Formerly TechAmerica GEIA-STD-4899A |
| 71 | SAE GEIA-HB-0005-2-2007 | 2007-11-01 | English | Technical Guidelines for Aerospace and High Performance Electronic Systems Containing Lead-free Solder and F inishes - Formerly TechAmerica GEIA-HB-0005-2 |
| 72 | SAE J1717-2007 | 2007-11-01 | English | Interior Automotive Plastic Part Testing |
| 73 | SAE AMS6481B-2007 | 2007-11-01 | English | Steel Bars, Forgings, and Tubing, Nitriding 3Cr - 1Mo - 0.2V - (0.29 - 0.36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted - UNS K24340 |
| 74 | SAE AS81021A-2007 | 2007-11-01 | English | Copper-Beryllium Alloy (Copper Alloy Numbers C17500 and C17510), Strip
DoD Adopted |
| 75 | SAE AMS4122K-2007 | 2007-11-01 | English | Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated - UNS A97075 |
| 76 | SAE AMS4121H-2007 | 2007-11-01 | English | Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated - UNS A92014
DoD Adopted |
| 77 | SAE AS4941A-2007 | 2007-11-01 | English | (R) Aerospace - General Requirements for Commercial Aircraft Hydraulic Components |
| 78 | SAE AS31971A-2007 | 2007-11-01 | English | (R) GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST
DoD Adopted |
| 79 | SAE AS5491C-2007 | 2007-11-01 | English | Calculation of Electron Vacancy Number in Superalloys |
| 80 | SAE AS21945A-2007 | 2007-11-01 | English | (R) BODY, CLUSTER FITTING, THREE-WAY, FLARELESS
DoD Adopted |
| 81 | SAE AS21943A-2007 | 2007-11-01 | English | (R) BODY, CLUSTER FITTING, TWO WAY, 90掳, FLARELESS
DoD Adopted |
| 82 | SAE AS21941A-2007 | 2007-11-01 | English | (R) BOLT, CLUSTER FITTING, DOUBLE PORT THROUGH, FLARELESS
DoD Adopted |
| 83 | SAE AS5971A-2007 | 2007-11-01 | English | FITTING ASSEMBLY, ELBOW, 45掳, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 84 | SAE AS9534A-2007 | 2007-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A
DoD Adopted |
| 85 | SAE AS9533A-2007 | 2007-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .4375-20 UNJF-3A
DoD Adopted |
| 86 | SAE AS9532A-2007 | 2007-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A
DoD Adopted |
| 87 | SAE AS9531A-2007 | 2007-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
DoD Adopted |
| 88 | SAE AS9530A-2007 | 2007-11-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN, .2500-28 UNJF-3A
DoD Adopted |
| 89 | SAE AMS4764F-2007 | 2007-11-01 | English | Copper Alloy, Brazing Filler Metal 52.5Cu - 38Mn - 9.5Ni 1615 to 1700 掳F (879 to 927 掳C) Solidus-Liquidus Range - UNS C69950
DoD Adopted |
| 90 | SAE AMS4984D-2007 | 2007-11-01 | English | Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile Strength - UNS R56410
DoD Adopted |
| 91 | SAE AS7104A-2007 | 2007-11-01 | English | NADCAP Requirements for Accreditation of Full Distributors |
| 92 | SAE AS5309A-2007 | 2007-11-01 | English | FITTING END, SPHERICAL, 37掳 FLARED TUBE CONNECTION DESIGN STANDARD |
| 93 | SAE AS5310A-2007 | 2007-11-01 | English | FITTING END, BULKHEAD, SPHERICAL, 37掳 FLARED TUBE CONNECTION DESIGN STANDARD |
| 94 | SAE AS7103A-2007 | 2007-11-01 | English | National Aerospace and Defense Contractors Accreditation Program (NADCAP) Requirements for Accreditation of Pass Through Distributors |
| 95 | SAE AMS-STD-66A-2007 | 2007-11-01 | English | Steel: Chemical Composition and Hardenability |
| 96 | SAE J2617-2007 | 2007-11-01 | English | Recommended Practice for Testing Performance of PEM Fuel Cell Stack Sub-system for Automotive Applications |
| 97 | SAE J1013-2007 | 2007-11-01 | English | Measurement of Whole Body Vibration of the Seated Operator of Off-Highway Work Machines |
| 98 | SAE J1733-2007 | 2007-11-01 | English | (R) Sign Convention for Vehicle Crash Testing |
| 99 | SAE AMS4410-2007 | 2007-11-01 | English | Aluminum Alloy Plate (7081-T7451) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged - UNS A97081 |
| 100 | SAE AMS4411-2007 | 2007-11-01 | English | Aluminum Alloy Plate (7081-T7651) 7.2Zn - 1.5Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged - UNS A97081 |
| 101 | SAE AMS4971H-2007 | 2007-11-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable - UNS R56620
DoD Adopted |
| 102 | SAE AS38999/30A-2007 | 2007-11-01 | English | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, PLUG, LANYARD RELEASE, FAIL-SAFE, TRIPLE START THREADED COUPLING, REMOVABLE CRIMP CONTACTS SOCKETS, SERIES III, METRIC |
| 103 | SAE AS4824B-2007 | 2007-11-01 | English | GASKET, FITTING END, 37掳 FLARED |
| 104 | SAE AMS2759/12A-2007 | 2007-11-01 | English | Gaseous Nitrocarburizing, Automatically Controlled by Potentials |
| 105 | SAE J369-2007 | 2007-11-01 | English | Flammability of Polymeric Interior Materials鈥擧orizontal Test Method
DoD Adopted |
| 106 | SAE AS4220C-2007 | 2007-11-01 | English | FITTING, ELBOW, 45掳, BEAM SEAL BULKHEAD |
| 107 | SAE ARP496D-2007 | 2007-11-01 | English | Stowage of Cabin Emergency Flotation Equipment |
| 108 | SAE USCAR-2-2007 | 2007-11-01 | English | Performance Specification for Automotive Electrical Connector Systems - Revision 5 |
| 109 | SAE AMS2368B-2007 | 2007-11-01 | English | Sampling and Testing of Wrought Titanium Raw Material Except Forgings and Forging Stock
DoD Adopted |
| 110 | SAE J912-2007 | 2007-11-01 | English | Test Method for Determining Block Resistance and Associated Characteristics of Automotive Trim Materials |
| 111 | SAE AS7928/2B-2007 | 2007-11-01 | English | (R) TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 掳C TOTALCONDUCTOR TEMPERATURE
DoD Adopted |
| 112 | SAE AS7928/9-2007 | 2007-11-01 | English | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, INSULATED, RECTANGULAR TONGUE, TIN WHISKER RESISTANT FOR THIN WALL WIRE, TYPE II, CLASS 1 FOR 105 掳C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 113 | SAE AMS-W-6858B-2007 | 2007-11-01 | English | Welding, Resistance: Spot and Seam |
| 114 | SAE AMS2370J-2007 | 2007-11-01 | English | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
DoD Adopted |
| 115 | SAE AS5827A-2007 | 2007-11-01 | English | FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD |
| 116 | SAE AS21940A-2007 | 2007-11-01 | English | (R) BOLT, CLUSTER FITTING, DOUBLE PORT FLARELESS
DoD Adopted |
| 117 | SAE AS21939A-2007 | 2007-11-01 | English | (R) BOLT, CLUSTER FITTING, SINGLE PORT THROUGH, FLARELESS
DoD Adopted |
| 118 | SAE AS21937A-2007 | 2007-11-01 | English | (R) NUT, CLUSTER FITTING, RETAINER
DoD Adopted |
| 119 | SAE AMS-QQ-S-700B-2007 | 2007-11-01 | English | Steel, Sheet and Strip, Medium and High Carbon
DoD Adopted |
| 120 | SAE ARP823E-2007 | 2007-11-01 | English | Minimizing Stress-Corrosion Cracking in Wrought Heat-Treatable Aluminum Alloy Products |
| 121 | SAE J1386-2007 | 2007-11-01 | English | Classification of Agricultural Wheeled Tractors for Vibration Tests of Operator Seats, Recommended Practice |
| 122 | SAE AMS2371H-2007 | 2007-11-01 | English | Quality Assurance Sampling and Testing Corrosion and Heat-Resistant Steels and Alloys Wrought Products and Forging Stock
DoD Adopted |
| 123 | SAE J1384-2007 | 2007-11-01 | English | Vibration Performance Evaluation of Operator Seats |
| 124 | SAE AIR4127-2007 | 2007-11-01 | English | Steel: Chemical Composition and Hardenability
DoD Adopted |
| 125 | SAE AIR4072A-2007 | 2007-11-01 | English | Safety Considerations of Carry-On Items During the Emergency Evacuation of Transport Aircraft |
| 126 | SAE AMS2401H-2007 | 2007-11-01 | English | Plating, Cadmium Low Hydrogen Content Deposit
DoD Adopted |
| 127 | SAE J1075-2007 | 2007-11-01 | English | Sound Measurement鈥擟onstruction Site |
| 128 | SAE ARP1631A-2007 | 2007-11-01 | English | Manufacturing Sequence for Fabrication of High-Strength Steel Parts 300M or 4340 Modified Low-Alloy Steels 270,000 psi (1860 MPa) Tensile Strength and Higher |
| 129 | SAE AIR4766-2007 | 2007-11-01 | English | Air Quality for Commercial Aircraft Cabins |
| 130 | SAE AMS6407H-2007 | 2007-11-01 | English | Steel, Bars, Forgings, and Tubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 - 0.33C) - UNS K33020
DoD Adopted |
| 131 | SAE AS39029/32A-2007 | 2007-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)
DoD Adopted |
| 132 | SAE AMS4347C-2007 | 2007-11-01 | English | Aluminum Alloy Sheet 1.0Mg - 0.8Si - 0.8Cu - 0.5Mn (6013-T4) Solution Heat Treated and Naturally Aged - UNS A96013 |
| 133 | SAE AS39029/31A-2007 | 2007-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)
DoD Adopted |
| 134 | SAE ARP4379A-2007 | 2007-11-01 | English | (R) Aerospace - Accumulator, Hydraulic, Cylindrical, Piston Separated |
| 135 | SAE AS21937A-2007 | 2007-11-01 | English | (R) NUT, CLUSTER FITTING, RETAINER |
| 136 | SAE AS21943A-2007 | 2007-11-01 | English | (R) BODY, CLUSTER FITTING, TWO WAY, 90°, FLARELESS |
| 137 | SAE AS5827A-2007 | 2007-11-01 | English | FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD |
| 138 | SAE AS4824B-2007 | 2007-11-01 | English | GASKET, FITTING END, 37° FLARED |
| 139 | SAE AS21941A-2007 | 2007-11-01 | English | (R) BOLT, CLUSTER FITTING, DOUBLE PORT THROUGH, FLARELESS |
| 140 | SAE AS21940A-2007 | 2007-11-01 | English | (R) BOLT, CLUSTER FITTING, DOUBLE PORT FLARELESS |
| 141 | SAE AS5309A-2007 | 2007-11-01 | English | FITTING END, SPHERICAL, 37° FLARED TUBE CONNECTION DESIGN STANDARD |
| 142 | SAE GEIA-HB-0005-2-2007 | 2007-11-01 | English | Technical Guidelines for Aerospace and High Performance Electronic Systems Containing Lead-free Solder and Finishes |
| 143 | SAE R-365-2007 | 2007-10-26 | English | Chrysler Engines 1922-1998 - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 144 | SAE ARP36104A-2007 | 2007-10-01(R 2018) | English | Air Cargo Pallets and Nets Compatibility |
| 145 | SAE AS18280 SUP 1A-2007 | 2007-10-01(R 2015) | English | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi (Supplement 1) |
| 146 | SAE AS3659-2007 | 2007-10-01(R 2014) | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN |
| 147 | SAE AMS3052-2007 | 2007-10-01(R 2013) | English | Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened |
| 148 | SAE AMS4128D-2007 | 2007-10-01(R 2013) | English | Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching - UNS A96061 |
| 149 | SAE AMS3414E-2007 | 2007-10-01(R 2013) | English | Flux, Aluminum Welding |
| 150 | SAE AMS4409-2007 | 2007-10-01(R 2013) | English | Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved and Artificially Aged - UNS A97019 |
| 151 | SAE J1754-1-2007 | 2007-10-01(R 2013) | English | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document |
| 152 | SAE ARP1538B-2007 | 2007-10-01(R 2013) | English | (R) Arresting Hook Installation, Land-Based Aircraft |
| 153 | SAE ARP36104A-2007 | 2007-10-01(R 2012) | English | Air Cargo Pallets and Nets Compatibility |
| 154 | SAE AS3616-2007 | 2007-10-01(R 2012) | English | NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 °F, UNS N07001 |
| 155 | SAE AMS2451/4B-2007 | 2007-10-01(R 2011) | English | Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement |
| 156 | SAE MA5405/2-2007 | 2007-10-01 | English | SPLICE, FIBER OPTIC, AEROSPACE INTER-CONNECT (MIL-PRF-29504 TERMINI) |
| 157 | SAE J2810-2007 | 2007-10-01 | English | HFC-134a (R-134a) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems |
| 158 | SAE AS17109-2007 | 2007-10-01 | English | (R) BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, THIN EXTRA LIGHT, TYPE III |
| 159 | SAE AS3616-2007 | 2007-10-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 °F, UNS N07001 |
| 160 | SAE AS85049/50A-A1-2007 | 2007-10-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90掳, CATEGORY 7 (FOR MIL-DTL-24308 CONNECTORS)
DoD Adopted |
| 161 | SAE AMS5630J-2007 | 2007-10-01 | English | Steel, Corrosion Resistant, Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C)
DoD Adopted |
| 162 | SAE J1236-2007 | 2007-10-01 | English | Cast Iron Sealing Rings (Metric) |
| 163 | SAE AMS4899B-2007 | 2007-10-01 | English | Titanium Alloy, Sheet, Strip, and Plate 4.5AI - 3V - 2Fe - 2Mo Annealed - UNS R54700 |
| 164 | SAE J1406-2007 | 2007-10-01 | English | Application of Hydraulic Brake Hose to Motor Vehicles鈥擶heel End and Axle |
| 165 | SAE J1032-2007 | 2007-10-01 | English | Definitions for Machine Availability (Off-Road Work Machines) |
| 166 | SAE AMS4128D-2007 | 2007-10-01 | English | Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching - UNS A96061 |
| 167 | SAE AMS3414E-2007 | 2007-10-01 | English | Flux, Aluminum Welding |
| 168 | SAE AMS5878C-2007 | 2007-10-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 59Ni - 22Cr - 2Mo - 14W - 0.35AI - 0.03La Solution Heat Treated - UNS N06230
DoD Adopted |
| 169 | SAE AS85049/139-2007 | 2007-10-01 | English | BUSHING, CABLE CLAMP TO CABLE, TELESCOPING FOR AS85049 CABLE CLAMPS CATEGORY 9
DoD Adopted |
| 170 | SAE AMS5873E-2007 | 2007-10-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30AI - 0.05La Consumable Electrode Remelted, Solution Heat Treated - UNS N06635
DoD Adopted |
| 171 | SAE AMS2526C-2007 | 2007-10-01 | English | Molybdenum Disulfide Coating, Thin Lubricating Film Impingement Applied |
| 172 | SAE AIR4023B-2007 | 2007-10-01 | English | (R) Aircraft Turbine Fuel Contamination History and Endurance Test Requirements |
| 173 | SAE AS21447A-2007 | 2007-10-01 | English | (R) BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED O.D. INTEGRAL STUD, TYPE VII ANTIFRICTION, INCH
DoD Adopted |
| 174 | SAE AS5368B-2007 | 2007-10-01 | English | (R) ADAPTER ASSEMBLY - PORT CONNECTION RING LOCKED TO FLARED TUBE END, 3000 PSI |
| 175 | SAE ARP1538B-2007 | 2007-10-01 | English | (R) Arresting Hook Installation, Land-Based Aircraft |
| 176 | SAE J2809-2007 | 2007-10-01 | English | Honda Diagnostic Serial Data Link Protocol鈥擜BS/VSA System |
| 177 | SAE AS85560/2A-2007 | 2007-10-01 | English | (R) BEARING, FIBER REINFORCED PLASTIC, SLEEVE, FLANGED, SELF-LUBRICATING, +250 掳F
DoD Adopted |
| 178 | SAE USCAR-35-2007 | 2007-10-01 | English | Test Procedures for Evaluating Bolt-Load Retention of Magnesium Alloys |
| 179 | SAE AMS3052-2007 | 2007-10-01 | English | Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened |
| 180 | SAE AS85560/1A-2007 | 2007-10-01 | English | (R) BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, SELF LUBRICATING, +250 掳F
DoD Adopted |
| 181 | SAE MA3427A-2007 | 2007-10-01 | English | Nut, Castellated, Hex - Thin, UNS G87400, Cadmium Plate, MJ Thread, Metric
DoD Adopted |
| 182 | SAE AS90376A-2007 | 2007-10-01 | English | CAP, DUST, PLASTIC, ELECTRIC CONNECTOR
DoD Adopted |
| 183 | SAE AMS2451/4B-2007 | 2007-10-01 | English | Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement |
| 184 | SAE AS85560A-2007 | 2007-10-01 | English | (R) Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification For |
| 185 | SAE AS3613A-2007 | 2007-10-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK. COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN |
| 186 | SAE AS3616-2007 | 2007-10-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 掳F, UNS N07001 |
| 187 | SAE AS3622A-2007 | 2007-10-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN |
| 188 | SAE AS3659-2007 | 2007-10-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, COBALT-NICKEL ALLOY, UNS R30159, 260 KSI MIN |
| 189 | SAE AMS3085-2007 | 2007-10-01 | English | Fluid, Reference for Testing AS5780 HPC Class (Polyol) Resistant Material |
| 190 | SAE AMS3140A-2007 | 2007-10-01 | English | Coating, Urethane, Aliphatic Isocyanate Polytetrafluoroethylene Filled |
| 191 | SAE AMS7725D-2007 | 2007-10-01 | English | Tungsten Heavy Alloy Shapes, Sintered, High Density
DoD Adopted |
| 192 | SAE ARP36104A-2007 | 2007-10-01 | English | Air Cargo Pallets and Nets Compatibility |
| 193 | SAE J1834-2007 | 2007-10-01 | English | Seat Belt Comfort, Fit, and Convenience鈥擳ruck and Bus |
| 194 | SAE AMS4952D-2007 | 2007-10-01 | English | Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2Mo - UNS R54620 |
| 195 | SAE AMS-S-7720A-2007 | 2007-10-01 | English | Steel, Corrosion-Resistant (18-8) Bars, Wire and Forging Stock (Aircraft Quality)
DoD Adopted |
| 196 | SAE AS85049/41A-2007 | 2007-10-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, NON-ENVIRONMENTAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-5015 GENERAL DUTY 'A' ENDBELL AND AS85049 ACCESSORIES)
DoD Adopted |
| 197 | SAE AMS6479B-2007 | 2007-10-01 | English | Steel, Bars, Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Special Aircraft-Quality Cleanliness |
| 198 | SAE J1834-2007 | 2007-10-01 | English | Seat Belt Comfort, Fit, and Convenience—Truck and Bus |
| 199 | SAE USCAR-27-2007 | 2007-10-01 | English | Specification for Testing Gas Discharge Light Source Subsystem |
| 200 | SAE ARP1538B-2007 | 2007-10-01 | English | (R) Arresting Hook Installation, Land-Based Aircraft |
| 201 | SAE AS85049/34A-2007 | 2007-10-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NON-ENVIRONMENTAL, THREADED ADAPTER, CATEGORY 3C (FOR MIL-DTL-26482 SERIES 1 JAM NUT RECEPTACLE CONNECTOR)
DoD Adopted |
| 202 | SAE J2208-2007 | 2007-10-01 | English | Park Standard for Automatic Transmissions |
| 203 | SAE AMS6327J-2007 | 2007-10-01 | English | Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength
DoD Adopted |
| 204 | SAE J915-2007 | 2007-10-01 | English | Automatic Transmissions - Manual Control Sequence |
| 205 | SAE AMS6328L-2007 | 2007-10-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (SAE 8750) - UNS K13550
DoD Adopted |
| 206 | SAE AMS6330G-2007 | 2007-10-01 | English | Steel Bars, Forgings, and Tubing 0.65Cr - 1.25Ni (0.33 - 0.38C) |
| 207 | SAE J1879-2007 | 2007-10-01 | English | (R) Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications |
| 208 | SAE AMS4972F-2007 | 2007-10-01 | English | Titanium Alloy Bars, Wire, and Rings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized - UNS R54810
DoD Adopted |
| 209 | SAE AS81659-A2-2007 | 2007-10-01 | English | Connectors, Electrical, Rectangular Crimp Contacts General Specification For
DoD Adopted |
| 210 | SAE AMS3417C-2007 | 2007-10-01 | English | Flux, Brazing High Temperature |
| 211 | SAE AS21432A-2007 | 2007-10-01 | English | (R) BEARING, ROLLER, NEEDLE, TRACK ROLLER, INTEGRAL STUD, TYPE VII, ANTIFRICTION, INCH
DoD Adopted |
| 212 | SAE AMS4413-2007 | 2007-10-01 | English | Aluminum Alloy, Plate 3.5 Cu - 1.0Li - .40Mg - .35 Mn - .45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged (Composition similar to UNS A92050) |
| 213 | SAE AMS4409-2007 | 2007-10-01 | English | Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved and Artificially Aged - UNS A97019 |
| 214 | SAE J1008-2007 | 2007-10-01 | English | Sound Measurement - Self- Propelled Agricultural Equipment - Exterior
ANSI Approved |
| 215 | SAE AMS6280K-2007 | 2007-10-01 | English | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630) - UNS G86300
DoD Adopted |
| 216 | SAE AMS6317H-2007 | 2007-10-01 | English | Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength - UNS K22440 |
| 217 | SAE ARP5602/2-2007 | 2007-10-01 | English | A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Hands-on Competencies |
| 218 | SAE ARP5602/1-2007 | 2007-10-01 | English | A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Introduction to Aerospace Fiber Optics Knowledge Competencies |
| 219 | SAE AMS2685E-2007 | 2007-10-01 | English | Welding, Tungsten Arc, Inert Gas (GTAW Method) |
| 220 | SAE ARP4043B-2007 | 2007-10-01 | English | Flight Line Grounding and Bonding of Aircraft |
| 221 | SAE J2604-2007 | 2007-10-01 | English | Recommended Test Procedure for Powered Gas Brake Control Systems |
| 222 | SAE J2603-2007 | 2007-10-01 | English | (R) Recommended Practice for Powered Gas Brake Control Systems |
| 223 | SAE J1406-2007 | 2007-10-01 | English | Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle |
| 224 | SAE AS9895A-2007 | 2007-10-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, AMS 5616, .2500-28 UNJF-3A
DoD Adopted |
| 225 | SAE ARP5483/6-2007 | 2007-10-01 | English | Rolling Element Bearing Test Method for Dimensional Stability |
| 226 | SAE J1754-1-2007 | 2007-10-01 | English | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced鈥擯art 1: Procurement Document
DoD Adopted |
| 227 | SAE ARP5483/5-2007 | 2007-10-01 | English | Rolling Element Bearing Test Method for Radial Limit and Fracture Load Testing |
| 228 | SAE ARP5483/4-2007 | 2007-10-01 | English | Rolling Element Test Method for Axial Limit and Fracture Load Testing |
| 229 | SAE AMS7498M-2007 | 2007-10-01 | English | Rings, Flash Welded Titanium and Titanium Alloys
DoD Adopted |
| 230 | SAE AS4807C-2007 | 2007-10-01 | English | FITTING ASSEMBLY, ELBOW, 90掳, BEAM SEAL, RETAINED NUT |
| 231 | SAE AMS5640U-2007 | 2007-10-01 | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining - UNS S30300 (Type 1); UNS S30323 (Type 2); UNS S30310 (Type 3)
DoD Adopted |
| 232 | SAE R-373-2007 | 2007-09-28 | English | Modern Engine Technology from A to Z - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 233 | SAE/TP 2007-01-3350-2007 | 2007-09-24 | English | Discharge of De-Icing Agents from Airports to Nearby Water Recipients in Relation to the Water Framework Directive |
| 234 | SAE/TP 2007-01-3313-2007 | 2007-09-24 | English | Experimental Investigation of a Bleed Air Ice Protection System |
| 235 | SAE/TP 2007-01-3312-2007 | 2007-09-24 | English | Loop Heat Pipe Technology for Aircraft Anti-Icing Applications |
| 236 | SAE/TP 2007-01-3311-2007 | 2007-09-24 | English | Appendix D - An Interim Icing Envelope |
| 237 | SAE/TP 2007-01-3351-2007 | 2007-09-24 | English | Dispersion of De-Icing Chemicals to the Areas Along the Runways at Oslo Airport Gardermoen |
| 238 | SAE/TP 2007-01-3310-2007 | 2007-09-24 | English | Application of FENSAP-ICE-Unsteady to Helicopter Icing |
| 239 | SAE/TP 2007-01-3309-2007 | 2007-09-24 | English | Ice Accretion Prediction on Helicopter Rotor Blade in Hover Flight |
| 240 | SAE/TP 2007-01-3308-2007 | 2007-09-24 | English | Numerical Simulation of Ice Formation on a Helicopter Fuselage |
| 241 | SAE/TP 2007-01-3305-2007 | 2007-09-24 | English | An Icing Index Comparison to Luosto Icing Measurements |
| 242 | SAE/TP 2007-01-3360-2007 | 2007-09-24 | English | Development of a Shed-Ice Trajectory Simulation in FENSAP-ICE |
| 243 | SAE/TP 2007-01-3357-2007 | 2007-09-24 | English | Anti-Icing Simulation in Wet Air of a Piccolo System using FENSAP-ICE |
| 244 | SAE/TP 2007-01-3285-2007 | 2007-09-24 | English | Aerodynamic Fidelity of Ice Accretion Simulation on a Subscale Model |
| 245 | SAE/TP 2007-01-3286-2007 | 2007-09-24 | English | The Effect of Wing Leading Edge Contamination on the Stall Characteristics of Aircraft |
| 246 | SAE/TP 2007-01-3288-2007 | 2007-09-24 | English | Modeling of Ice Accretion and Shedding In Turbofan Engines With Mixed Phase/Glaciated (Ice Crystal) Conditions |
| 247 | SAE/TP 2007-01-3365-2007 | 2007-09-24 | English | Observations of Ice Ridge Formation on the Sj30-2 Leading Edge Slat in Freezing Drizzle Conditions |
| 248 | SAE/TP 2007-01-3302-2007 | 2007-09-24 | English | Anti-Icing Fluid Residues |
| 249 | SAE/TP 2007-01-3359-2007 | 2007-09-24 | English | Parametric Investigation of Ice Shedding from a Business Jet Aircraft |
| 250 | SAE/TP 2007-01-3348-2007 | 2007-09-24 | English | A Database of Supercooled Large Droplet Ice Accretions |
| 251 | SAE/TP 2007-01-3346-2007 | 2007-09-24 | English | Parametric Experiment of Large Droplet Dynamics |
| 252 | SAE/TP 2007-01-3345-2007 | 2007-09-24 | English | Parametric Study of Ice Accretion Formation on a Swept Wing at SLD Conditions |
| 253 | SAE/TP 2007-01-3290-2007 | 2007-09-24 | English | Development of Ice Crystal Facilities for Engine Testing |
| 254 | SAE/TP 2007-01-3291-2007 | 2007-09-24 | English | Liquid Water Content and Droplet Size Distribution Mass Fractions for Wind Milling Engine Fan Blade Ice Accretion Analysis |
| 255 | SAE/TP 2007-01-3293-2007 | 2007-09-24 | English | Technique for Measurement of Droplet Profiles for Use in Icing Physics Studies |
| 256 | SAE/TP 2007-01-3294-2007 | 2007-09-24 | English | Review of Role of Icing Feathers in Ice Accretion Formation |
| 257 | SAE/TP 2007-01-3341-2007 | 2007-09-24 | English | Validation Results of FENSAP-ICE at MHI |
| 258 | SAE/TP 2007-01-3295-2007 | 2007-09-24 | English | The Water Film Weber Number in Glaze Icing Scaling |
| 259 | SAE/TP 2007-01-3296-2007 | 2007-09-24 | English | Experimental Study of the Scallop Formation on Swept Cylinder |
| 260 | SAE/TP 2007-01-3299-2007 | 2007-09-24 | English | Sikorsky S-92A and S-76D Helicopter Rotor Ice Protection Systems |
| 261 | SAE/TP 2007-01-3339-2007 | 2007-09-24 | English | A Third-generation In-flight Icing Code: FENSAP-ICE-Unsteady |
| 262 | SAE/TP 2007-01-3338-2007 | 2007-09-24 | English | A Comparison Exercise of Ice Accretion Simulations with 2D and 3D Solvers |
| 263 | SAE/TP 2007-01-3335-2007 | 2007-09-24 | English | SONACA Icing Test Campaign on a 2D model at CIRA IWT |
| 264 | SAE/TP 2007-01-3334-2007 | 2007-09-24 | English | Methodology for Icing Tanker Spray Rig Design and Evaluation |
| 265 | SAE/TP 2007-01-3333-2007 | 2007-09-24 | English | Preliminary Investigation of the Impact of Flight-Path Variability of Icing Conditions Upon the Critical Ice Shape |
| 266 | SAE/TP 2007-01-3332-2007 | 2007-09-24 | English | Swept Wing Icing Physics Studies at NASA Glenn Research Center 1990-2006 |
| 267 | SAE/TP 2007-01-3329-2007 | 2007-09-24 | English | Certification of the Sikorsky S-92A Helicopter Ice Protection System: Meteorological Aspects of Tanker Tests and Natural Icing Flights |
| 268 | SAE/TP 2007-01-3355-2007 | 2007-09-24 | English | Development of an Engine Anti-Ice Protection System using Experimental and Numerical Approaches |
| 269 | SAE/TP 2007-01-3328-2007 | 2007-09-24 | English | Evaluation of Small Scale Icing Tunnel Test Results |
| 270 | SAE/TP 2007-01-3301-2007 | 2007-09-24 | English | US Army UH-60M Helicopter Main Rotor Ice Protection System |
| 271 | SAE/TP 2007-01-3349-2007 | 2007-09-24 | English | Biological Degradation of Spent De-Icing Fluids in a Municipal Wastewater Treatment Plant – Experiences and Challenges |
| 272 | SAE/TP 2007-01-3325-2007 | 2007-09-24 | English | Ice Detection Systems: A Historical Perspective |
| 273 | SAE/TP 2007-01-3324-2007 | 2007-09-24 | English | Icing Analysis of the NASA S3 Icing Research Aircraft Using LEWICE3D Version 2 |
| 274 | SAE/TP 2007-01-3323-2007 | 2007-09-24 | English | FENSAP-ICE Modeling of the Ice Particle Threat to Engines in Flight |
| 275 | SAE/TP 2007-01-3318-2007 | 2007-09-24 | English | Simulation of Freezing and Frozen Precipitation for the Evaluation of De/anti-icing Systems |
| 276 | SAE/TP 2007-01-3315-2007 | 2007-09-24 | English | A New Surface Coating for Prevention of Icing on Airfoils |
| 277 | SAE/TP 2007-01-3362-2007 | 2007-09-24 | English | The Provision of In-Flight Icing Information in the Cockpit – The Flysafe Concept |
| 278 | SAE/TP 2007-01-3303-2007 | 2007-09-24 | English | Laboratory Testing of Aircraft Anti-Icing Fluid Rehydrated Gel Residues |
| 279 | SAE/TP 2007-01-3848-2007 | 2007-09-19 | English | A Business Aircraft View to the Future |
| 280 | SAE/TP 2007-01-3856-2007 | 2007-09-17 | English | Computational Fluid Dynamics Development of the JCB DIESELMAX Land Speed Record Vehicle |
| 281 | SAE/TP 2007-01-3854-2007 | 2007-09-17 | English | Safety Assurance of Distributed System Architecture in Air Traffic Control Applications |
| 282 | SAE/TP 2007-01-3852-2007 | 2007-09-17 | English | System Dependency Analysis for Complex Aircraft Systems |
| 283 | SAE/TP 2007-01-3850-2007 | 2007-09-17 | English | Flexible Template for Drill Feed Units |
| 284 | SAE/TP 2007-01-3849-2007 | 2007-09-17 | English | Advanced Portable Orbital-Drilling Unit for Airbus Final Assembly Lines |
| 285 | SAE/TP 2007-01-3847-2007 | 2007-09-17 | English | Aerionics – A New Aero Industry for Flight Control |
| 286 | SAE/TP 2007-01-3826-2007 | 2007-09-17 | English | Model-Based Design of Complex Integrated Systems for Synchronous Architectures |
| 287 | SAE/TP 2007-01-3824-2007 | 2007-09-17 | English | Considerations for Using Dual Indication in Aerospace Arc Fault Circuit Breakers (AFCB) |
| 288 | SAE/TP 2007-01-3821-2007 | 2007-09-17 | English | Robotic Drilling System for 737 Aileron |
| 289 | SAE/TP 2007-01-3820-2007 | 2007-09-17 | English | New PKM Tricept T9000 and Its Application to Flexible Manufacturing at Aerospace Industry |
| 290 | SAE/TP 2007-01-3817-2007 | 2007-09-17 | English | Implementation of Automatic Airspace Avoidance in an Advanced Flight Control System |
| 291 | SAE/TP 2007-01-3816-2007 | 2007-09-17 | English | Guidance Concept for a Receiver Aircraft to Perform Autonomous Aerial Refueling |
| 292 | SAE/TP 2007-01-3814-2007 | 2007-09-17 | English | Orbital Drilling of Aerospace Materials |
| 293 | SAE/TP 2007-01-3813-2007 | 2007-09-17 | English | Verification of Supply Chain Quality for Perishable Tools |
| 294 | SAE/TP 2007-01-3812-2007 | 2007-09-17 | English | Performance Evaluation of 2-mm Thick Alclad AA2024 T3 Aluminium Alloy Friction Spot Welding |
| 295 | SAE/TP 2007-01-3811-2007 | 2007-09-17 | English | Robotic Friction Stir Welding |
| 296 | SAE/TP 2007-01-3795-2007 | 2007-09-17 | English | Lug Cutting and Trimming of the Carbon Fibre Wing Panels of the Airbus A400m with Portable Hand Positioned Tools |
| 297 | SAE/TP 2007-01-3798-2007 | 2007-09-17 | English | The Fault Assumptions in Distributed Integrated Architectures |
| 298 | SAE/TP 2007-01-3799-2007 | 2007-09-17 | English | Methodology for the Common Mode Analysis |
| 299 | SAE/TP 2007-01-3801-2007 | 2007-09-17 | English | Buses and Networks for Contemporary Avionics |
| 300 | SAE/TP 2007-01-3802-2007 | 2007-09-17 | English | Subsystem Design and Integration of A Robust Modular Avionics Suite for UAV Systems Using the Time Triggered Protocol (TTP) |
| 301 | SAE/TP 2007-01-3804-2007 | 2007-09-17 | English | Prediction of Susceptibility of Small Aircraft to Pilot-Induced Oscillations |
| 302 | SAE/TP 2007-01-3805-2007 | 2007-09-17 | English | Advanced Virtualization Technologies in Aerospace and Automotive Embedded System Applications |
| 303 | SAE/TP 2007-01-3806-2007 | 2007-09-17 | English | Development of a Broad Delta Airframe and Propulsion Concepts for Reducing Aircraft Noise around Airports |
| 304 | SAE/TP 2007-01-3807-2007 | 2007-09-17 | English | Minimizing Impact on Climate in Aircraft Design |
| 305 | SAE/TP 2007-01-3808-2007 | 2007-09-17 | English | Contrail Avoidance Project Summary |
| 306 | SAE/TP 2007-01-3809-2007 | 2007-09-17 | English | Re-Engineering, Austempering, and Selective Laser Hardening of a 4340 Latch Body used in the Cargo Hook of a CH-47 Military Helicopter |
| 307 | SAE/TP 2007-01-3810-2007 | 2007-09-17 | English | Literature Data and Corrosion Testing of Hard Anodized and Duplex Sealed 7075-T7351 and 7050-T7451 Wrought Aluminum Alloy Plates after Cyclic Loading |
| 308 | SAE/TP 2007-01-3827-2007 | 2007-09-17 | English | Model-Based Development of Distributed Embedded Real-Time Systems with the DECOS Tool-Chain |
| 309 | SAE/TP 2007-01-3828-2007 | 2007-09-17 | English | Concept Development of a Pneumatically Driven, Fixed Root Circulation Controlled Helicopter |
| 310 | SAE/TP 2007-01-3829-2007 | 2007-09-17 | English | A Novel Tool for the Conceptual Design of Aircraft On-Board Power Systems |
| 311 | SAE/TP 2007-01-3830-2007 | 2007-09-17 | English | Doing More with Less: Weight-Optimised Electric Actuation Systems |
| 312 | SAE/TP 2007-01-3831-2007 | 2007-09-17 | English | Usage of MTBF for Exposure Times of Undetected Faults in Safety Assessments |
| 313 | SAE/TP 2007-01-3832-2007 | 2007-09-17 | English | Wireless Devices Usage with Adaptive Interfaces in the Context of Aeronautical Maintenance Processes to Reduce the Incidence of the Human Error and Increase Safety |
| 314 | SAE/TP 2007-01-3833-2007 | 2007-09-17 | English | Electrostatic Discharge Phenomenon: A Potential Threat to Aircraft Safety |
| 315 | SAE/TP 2007-01-3834-2007 | 2007-09-17 | English | Workforce Enterprise Modeling |
| 316 | SAE/TP 2007-01-3835-2007 | 2007-09-17 | English | Collaborative Network Centric Experiment Involving Joint Services and Northrop Grumman Corporation |
| 317 | SAE/TP 2007-01-3815-2007 | 2007-09-17 | English | Experiencing the Technology Development for High Lifetime Joining of the Commercial Aircraft Airframe Components of Metal and Polymer Composite Materials |
| 318 | SAE/TP 2007-01-3836-2007 | 2007-09-17 | English | Integrated Use of Data Mining and Statistical Analysis Methods to Analyze Air Traffic Delays |
| 319 | SAE/TP 2007-01-3837-2007 | 2007-09-17 | English | Zn-Ni Plating as a Cadmium Alternative |
| 320 | SAE/TP 2007-01-3838-2007 | 2007-09-17 | English | Reducing Corrosion Fatigue and SCC Failures in 300M Steel Landing Gear Using Low Plasticity Burnishing |
| 321 | SAE/TP 2007-01-3839-2007 | 2007-09-17 | English | Advanced Low-cost Titanium-alloy Materials for Aerospace Fastener Applications |
| 322 | SAE/TP 2007-01-3840-2007 | 2007-09-17 | English | Monitoring Environmental Conditions by Leveraging Advanced Radio Frequency Identification (RFID) |
| 323 | SAE/TP 2007-01-3841-2007 | 2007-09-17 | English | What Goes into Your Parts is More Important than Where You Source Them |
| 324 | SAE/TP 2007-01-3842-2007 | 2007-09-17 | English | Medium Wave Infrared Heater for High-Speed Fiber Placement |
| 325 | SAE/TP 2007-01-3843-2007 | 2007-09-17 | English | High-Speed Fiber Placement on Large Complex Structures |
| 326 | SAE/TP 2007-01-3844-2007 | 2007-09-17 | English | Dynamic Target State Estimation for Autonomous Aerial Vehicles using a Monocular Camera System |
| 327 | SAE/TP 2007-01-3845-2007 | 2007-09-17 | English | Coordinated Autonomous UAVs: Applications for a Heterogeneous Urban RSTA Team |
| 328 | SAE/TP 2007-01-3846-2007 | 2007-09-17 | English | Mission Planning for UAV Sensing Tasks in Close Proximity Environments |
| 329 | SAE/TP 2007-01-3864-2007 | 2007-09-17 | English | Case for a Multidisciplinary Modeling Platform for Space Launch Risk Analysis |
| 330 | SAE/TP 2007-01-3865-2007 | 2007-09-17 | English | Decision Support Systems for Launch and Range Operations Using Jess |
| 331 | SAE/TP 2007-01-3866-2007 | 2007-09-17 | English | The Commercial Aviation Alternative Fuels Initiative |
| 332 | SAE/TP 2007-01-3867-2007 | 2007-09-17 | English | U.S. DOE Fossil Energy Fuel Cell Program |
| 333 | SAE/TP 2007-01-3870-2007 | 2007-09-17 | English | Snake-Arm Robots: A New Approach to Aircraft Assembly |
| 334 | SAE/TP 2007-01-3871-2007 | 2007-09-17 | English | Managing Risk Reduction using a Relative Risk Prioritization Tool |
| 335 | SAE/TP 2007-01-3872-2007 | 2007-09-17 | English | Assuring a Complex Safety-Critical Systems of Systems |
| 336 | SAE/TP 2007-01-3873-2007 | 2007-09-17 | English | Rocket Assisted Takeoff (RATO) for Business Jets |
| 337 | SAE/TP 2007-01-3874-2007 | 2007-09-17 | English | Automatic Control Implementation and Upgraded Electrical System Design for the Oculus 2.0 Sensor Platform |
| 338 | SAE/TP 2007-01-3875-2007 | 2007-09-17 | English | Methodology for Optimizing the Aerodynamic Performance of the Time Attack Series Cobb Tuning Subaru WRX 2006 Using Mesh Deformation Techniques |
| 339 | SAE/TP 2007-01-3876-2007 | 2007-09-17 | English | Liquid Oxygen/Liquid Methane Rocket Engine Development |
| 340 | SAE/TP 2007-01-3877-2007 | 2007-09-17 | English | Ground and On-Board Diagnostics and Prognostics for Aircraft Batteries |
| 341 | SAE/TP 2007-01-3878-2007 | 2007-09-17 | English | Very High Frequency Monitoring System for Engine Gearbox and Generator Health Management |
| 342 | SAE/TP 2007-01-3881-2007 | 2007-09-17 | English | First Results: FORAS in Operation |
| 343 | SAE/TP 2007-01-3882-2007 | 2007-09-17 | English | Idealized Modeling and Analysis of the Shuttle Orbiter Wing Leading Edge Impact Data |
| 344 | SAE/TP 2007-01-3883-2007 | 2007-09-17 | English | Sealing and Structural Enhancement System for the Rear Cargo Ramp of a C-130 Aircraft |
| 345 | SAE/TP 2007-01-3884-2007 | 2007-09-17 | English | An Overview of Titanium Alloys Produced by Electron-Beam Single-Melting (EBSM) |
| 346 | SAE/TP 2007-01-3885-2007 | 2007-09-17 | English | Process Simulation Ensures Implementation of Lean Manufacturing Principles in AIRBUS A320 Equipment Installation |
| 347 | SAE/TP 2007-01-3886-2007 | 2007-09-17 | English | Kaizen Through Heijunka Production (Leveled Production) |
| 348 | SAE/TP 2007-01-3791-2007 | 2007-09-17 | English | Implementing the DoD Unique Identification (UID) Requirement and Understanding Its Impact on Manufacturing and Data Management Systems |
| 349 | SAE/TP 2007-01-3797-2007 | 2007-09-17 | English | Flexible Fixtures with Low Cost and Short Lead-Times |
| 350 | SAE/TP 2007-01-3888-2007 | 2007-09-17 | English | The 747-400 Dreamlifter - Overview & Mission |
| 351 | SAE/TP 2007-01-3890-2007 | 2007-09-17 | English | Influence of Fastener Coatings on Fretting Fatigue |
| 352 | SAE/TP 2007-01-3891-2007 | 2007-09-17 | English | Optimization of Split Sleeve Cold Expansion Process for Aerospace Aluminum Alloys |
| 353 | SAE/TP 2007-01-3893-2007 | 2007-09-17 | English | Drilling Advanced Aircraft Structures with PCD (Poly-Crystalline Diamond) Drills |
| 354 | SAE/TP 2007-01-3898-2007 | 2007-09-17 | English | Hybrid Adaptive Flight Control with Self-Improving Plant Model for Stability and Control of Damaged Aircraft |
| 355 | SAE/TP 2007-01-3899-2007 | 2007-09-17 | English | Adaptive Control of Unmanned Aerial Vehicles in Atmospheric Flight with Reduced Models |
| 356 | SAE/TP 2007-01-3900-2007 | 2007-09-17 | English | An Electro – Mechanical Actuator for General Aviation Aircraft |
| 357 | SAE/TP 2007-01-3901-2007 | 2007-09-17 | English | Investigation of Signal Jitter in COTS Optical Tracking Devices for Use with Synthetic Vision Systems |
| 358 | SAE/TP 2007-01-3902-2007 | 2007-09-17 | English | Impact of Oscillatory Failure Cases in Electro-Hydraulic Actuation Systems on an Aeroelastic Aircraft |
| 359 | SAE/TP 2007-01-3904-2007 | 2007-09-17 | English | Wireless Integrated Cockpit Information Display: The Underlying Technologies |
| 360 | SAE/TP 2007-01-3905-2007 | 2007-09-17 | English | Wireless Integrated Cockpit Information Display: Military Cockpit Applications |
| 361 | SAE/TP 2007-01-3906-2007 | 2007-09-17 | English | The Boeing Fuel Cell Demonstrator Airplane |
| 362 | SAE/TP 2007-01-3907-2007 | 2007-09-17 | English | Identify/Utilize Process Capability Information to Predict Variation in Aircraft Early Design |
| 363 | SAE/TP 2007-01-3908-2007 | 2007-09-17 | English | A New Simulation Technique Using a Holistic Approach and Methodology to Assess Productivity of the New Plant for Manufacturing the Boeing 787 |
| 364 | SAE/TP 2007-01-3909-2007 | 2007-09-17 | English | On the Use of Force Feedback for Cost Efficient Robotic Drilling |
| 365 | SAE/TP 2007-01-3910-2007 | 2007-09-17 | English | Balloon Launched UAV with Nested Wing for Near Space Applications |
| 366 | SAE/TP 2007-01-3911-2007 | 2007-09-17 | English | Expanding the Small UAV Design Space with Inflatable Wings |
| 367 | SAE/TP 2007-01-3912-2007 | 2007-09-17 | English | Image Exploitation System for Airborne Surveillance |
| 368 | SAE/TP 2007-01-3913-2007 | 2007-09-17 | English | One Piece Barrel Fastening |
| 369 | SAE/TP 2007-01-3915-2007 | 2007-09-17 | English | Automated Riveting Cell for A320 Wing Panels with Improved Throughput and Reliability (SA2) |
| 370 | SAE/TP 2007-01-3916-2007 | 2007-09-17 | English | Development of an Automated Part Loading and Unloading System for a Cylindrical Die Thread Roller |
| 371 | SAE/TP 2007-01-3917-2007 | 2007-09-17 | English | Implementation of Low-Cost Technologies in Sustaining Production |
| 372 | SAE/TP 2007-01-3919-2007 | 2007-09-17 | English | Industry Activities Related to Aircraft Information Security |
| 373 | SAE/TP 2007-01-3920-2007 | 2007-09-17 | English | Active Flow and Aeroelastic Control of Lifting Surfaces Using Synthetic Jet Actuators |
| 374 | SAE/TP 2007-01-3921-2007 | 2007-09-17 | English | Robust Analysis of Active Flutter Suppression Using Multiple Control Surfaces via Second-Order Controllers |
| 375 | SAE/TP 2007-01-3922-2007 | 2007-09-17 | English | Safety and Certification of UAVs |
| 376 | SAE/TP 2007-01-3923-2007 | 2007-09-17 | English | Advanced Environmental Control System (The 2nd Part) |
| 377 | SAE/TP 2007-01-3924-2007 | 2007-09-17 | English | GE Aviation Low Emissions Combustion Technology Evolution |
| 378 | SAE/TP 2007-01-3925-2007 | 2007-09-17 | English | A Software Method for Demonstrating Validation of Computer Dummy Models Used in the Evaluation of Aircraft Seating Systems |
| 379 | SAE/TP 2007-01-3926-2007 | 2007-09-17 | English | Developments in Hole-to-Hole Assembly |
| 380 | SAE/TP 2007-01-3869-2007 | 2007-09-17 | English | Assembly Fixture for 787 Section 11, Heavy Composite Assembly |
| 381 | SAE/TP 2007-01-3927-2007 | 2007-09-17 | English | Reducing Design Time, Part Cost, and Manufacturing Risk on New Airplane Projects Using Intelligent Software Solutions |
| 382 | SAE/TP 2007-01-3889-2007 | 2007-09-17 | English | Columned Multi Bubble Fuselage (CMBF) for BWB |
| 383 | SAE/TP 2007-01-3928-2007 | 2007-09-17 | English | The Selection and Qualification of a Parachute Recovery System for Your UAV |
| 384 | SAE/TP 2007-01-3792-2007 | 2007-09-17 | English | Development of the Acousti-Cap Technology for Double-Layer Acoustic Liners in Aircraft Engine Nacelles |
| 385 | SAE/TP 2007-01-3929-2007 | 2007-09-17 | English | Robust Control Design for a Flexible Unmanned Aerial Vehicle |
| 386 | SAE/TP 2007-01-3930-2007 | 2007-09-17 | English | Development of a Small Long Endurance Hybrid PEM Fuel Cell Powered UAV |
| 387 | SAE/TP 2007-01-3931-2007 | 2007-09-17 | English | Through-Thickness Thermal Conductivity in Composites Based on 3-D Fiber Architectures |
| 388 | SAE/TP 2007-01-3780-2007 | 2007-09-17 | English | All Electric Fastening System (AEFS) |
| 389 | SAE/TP 2007-01-3781-2007 | 2007-09-17 | English | Development of Portable and Flexible Track Positioning System for Aircraft Manufacturing Processes |
| 390 | SAE/TP 2007-01-3782-2007 | 2007-09-17 | English | Universal Splice Machine |
| 391 | SAE/TP 2007-01-3783-2007 | 2007-09-17 | English | Horizontal Rivet Injector Design Used on A320 Upper Panel |
| 392 | SAE/TP 2007-01-3784-2007 | 2007-09-17 | English | Assessing the Security of Airborne Networks |
| 393 | SAE/TP 2007-01-3785-2007 | 2007-09-17 | English | Keep the User in Mind: Operational Considerations for Securing Airborne Networks |
| 394 | SAE/TP 2007-01-3787-2007 | 2007-09-17 | English | The Effects of Humidity on the Properties of Air and the Influence of Condensation on the Pressure Distribution over an Aerofoil |
| 395 | SAE/TP 2007-01-3788-2007 | 2007-09-17 | English | A Brief Survey of the Experimental Methods Used for Wake Vortex Investigations |
| 396 | SAE/TP 2007-01-3789-2007 | 2007-09-17 | English | A Mean Value Based Sizing and Simulation Model of a Hydrogen Fueled Spark-Ignition Internal Combustion Engine |
| 397 | SAE/TP 2007-01-3790-2007 | 2007-09-17 | English | A Step Towards CO2-Neutral Aviation |
| 398 | SAE/TP 2007-01-3932-2007 | 2007-09-17 | English | Evaluation of a Mixed Flow Turbofan Engine with Intermediate Turbine Burning for a Supersonic Aircraft |
| 399 | SAE/TP 2007-01-3863-2007 | 2007-09-17 | English | Optical Backscatter Reflectometry as a Measurement Tool for Fiber-Optics in Avionics and Aerospace Applications |
| 400 | SAE/TP 2007-01-3861-2007 | 2007-09-17 | English | Application of Non-Parametric Statistical Methods to Reliability Database Analysis |
| 401 | SAE/TP 2007-01-3860-2007 | 2007-09-17 | English | Soviet Propeller V/STOL Concepts of the 20th Century |
| 402 | SAE/TP 2007-01-3859-2007 | 2007-09-17 | English | Status, Vision, and Challenges of an Intelligent Distributed Engine Control Architecture |
| 403 | SAE/TP 2007-01-3858-2007 | 2007-09-17 | English | Racecar Aerodynamic Optimization for an E-1 Class Streamliner Using Arbitrary Shape Deformation |
| 404 | SAE/TP 2007-01-3857-2007 | 2007-09-17 | English | CFD Analysis of Directional Stability for the American Challenger Rocket Car |
| 405 | SAE/TP 2007-01-3855-2007 | 2007-09-17 | English | Subsystem Design Using Time-Triggered Protocol (TTP): Key Aspects of Control System Application Reuse |
| 406 | SAE J2024-2007 | 2007-09-01(R 2013) | English | Contaminants for Testing Air Brake Components and Auxiliary Pneumatic Devices-Truck and Bus |
| 407 | SAE AIR1064D-2007 | 2007-09-01(R 2012) | English | (R) Braking System Dynamics |
| 408 | SAE AS7928/10-2007 | 2007-09-01(R 2012) | English | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE |
| 409 | SAE J882-2007 | 2007-09-01(R 2012) | English | Test Method for Measuring Thickness of Automotive Textiles and Plastics |
| 410 | SAE AMS2432C-2007 | 2007-09-01(R 2010) | English | Shot Peening, Computer Monitored |
| 411 | SAE AS81790-2007 | 2007-09-01(R 2008) | English | Connectors, Receptacle, External Electric Power, Aircraft General Specification For
DoD Adopted |
| 412 | SAE AMS-WW-T-700/5A-2007 | 2007-09-01 | English | Tube, Aluminum Alloy, Drawn, Seamless, 5086
DoD Adopted |
| 413 | SAE AMS-WW-T-700/6A-2007 | 2007-09-01 | English | Tube, Aluminum Alloy, Drawn, Seamless, 6061
DoD Adopted |
| 414 | SAE J2743-2007 | 2007-09-01 | English | Air Compressor Size Rating Recommended Practice - Truck and Bus |
| 415 | SAE AS5382/5A-2007 | 2007-09-01 | English | CABLE, FIBER OPTIC, MULTI-MODE, 50/125/450 渭m, GRADED INDEX, HERMETIC COATED, TIGHT BUFFER |
| 416 | SAE AMS-WW-T-700A-2007 | 2007-09-01 | English | Tube, Aluminum and Aluminum Alloy, Drawn, Seamless, General Specification for
DoD Adopted |
| 417 | SAE J882-2007 | 2007-09-01 | English | Test Method for Measuring Thickness of Automotive Textiles and Plastics |
| 418 | SAE AS4720-2007 | 2007-09-01 | English | Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Virgin, Modified, Pigmented and Filled Compounds Used for Compression Molding |
| 419 | SAE AS4221C-2007 | 2007-09-01 | English | FITTING, ELBOW, 90掳, BEAM SEAL BULKHEAD |
| 420 | SAE AIR1064D-2007 | 2007-09-01 | English | (R) Braking System Dynamics |
| 421 | SAE J2743-2007 | 2007-09-01 | English | Air Compressor Size Rating Recommended Practice鈥擳ruck and Bus |
| 422 | SAE AS17107A-2007 | 2007-09-01 | English | (R) BEARING, BALL, ANNULAR, PRIMARILY FOR AIRCRAFT GENERATORS AND MOTOR-GENERATORS, STANDARD LIGHT, TYPE I
DoD Adopted |
| 423 | SAE J533-2007 | 2007-09-01 | English | (R) Flares for Tubing
DoD Adopted |
| 424 | SAE AS4224C-2007 | 2007-09-01 | English | FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON SIDE |
| 425 | SAE J814-2007 | 2007-09-01 | English | Engine Coolants |
| 426 | SAE J631-2007 | 2007-09-01 | English | Radiator Nomenclature |
| 427 | SAE AS85049/55B-A1-2007 | 2007-09-01 | English | Connector Accessories, Electrical, Strain Relief, Non-Environmental, 90掳, Self-Locking and Non-Self-Locking, Category 4C (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3, and MIL-DTL-83723 Series III Connectors)
DoD Adopted |
| 428 | SAE J2184-2007 | 2007-09-01 | English | (R) Vehicle Lift Points for Service Garage Lifting |
| 429 | SAE AS4230C-2007 | 2007-09-01 | English | FITTING, ELBOW, 45掳, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
| 430 | SAE AS4231C-2007 | 2007-09-01 | English | FITTING, ELBOW, 45掳, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
| 431 | SAE AS4232C-2007 | 2007-09-01 | English | FITTING, ELBOW, 90掳, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
| 432 | SAE AS4233C-2007 | 2007-09-01 | English | FITTING, ELBOW, 90掳, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING |
| 433 | SAE J1647-2007 | 2007-09-01 | English | Plastic Materials and Coatings for Use In or On Optical Parts Such as Lenses and Reflectors of High-Intensity Discharge Forward Lighting Devices Used in Motor Vehicles |
| 434 | SAE AMS-L-18331A-2007 | 2007-09-01 | English | Lead Alloy Pig
DoD Adopted |
| 435 | SAE AMS-WW-T-700/3A-2007 | 2007-09-01 | English | Tube, Aluminum Alloy, Drawn, Seamless, 2024
DoD Adopted |
| 436 | SAE AMS-WW-T-700/4A-2007 | 2007-09-01 | English | Tube, Aluminum Alloy, Drawn, Seamless, 5052
DoD Adopted |
| 437 | SAE J2743-2007 | 2007-09-01 | English | Air Compressor Size Rating Recommended Practice - Truck and Bus |
| 438 | SAE AS9121A-2007 | 2007-09-01 | English | Stockist Distributors Quality System Questionnaire Associated with AS9120 |
| 439 | SAE AS4210D-2007 | 2007-09-01 | English | FITTING, TEE, BEAM SEAL |
| 440 | SAE AS5227A-2007 | 2007-09-01 | English | FLANGE, STRAIGHT THREAD PORT, WELD |
| 441 | SAE AS1300C-2007 | 2007-09-01 | English | PORT - RING LOCKED FLUID CONNECTION TYPE STANDARD DIMENSIONS FOR
DoD Adopted |
| 442 | SAE AS4211D-2007 | 2007-09-01 | English | FITTING, CROSS, BEAM SEAL |
| 443 | SAE AIR1539B-2007 | 2007-09-01 | English | (R) Environmental Control System Contamination |
| 444 | SAE AS7928/10-2007 | 2007-09-01 | English | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER (PERMANENT, TYPE II, CLASS 1) FOR 105 掳C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 445 | SAE ARP498B-2007 | 2007-09-01 | English | Design, Layout, Criteria - Plastic Integrally Lighted Panels |
| 446 | SAE AS22227A-2007 | 2007-09-01 | English | (R) Bearing, Ball, Annular, Generator and Motor Generator
DoD Adopted |
| 447 | SAE AMS6302H-2007 | 2007-09-01 | English | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C) - UNS K23015
DoD Adopted |
| 448 | SAE AS4809C-2007 | 2007-09-01 | English | FITTING ASSEMBLY, TEE, BEAM SEAL, RETAINED NUT ON RUN |
| 449 | SAE J1019-2007 | 2007-09-01 | English | Tests and Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose, and Hose Assemblies
DoD Adopted |
| 450 | SAE AMS-QQ-A-250/8B-2007 | 2007-09-01 | English | Aluminum Alloy 5052, Plate and Sheet - UNS A95052
DoD Adopted |
| 451 | SAE J1748-2007 | 2007-09-01 | English | Methods for Determining Physical Properties of Polymeric Materials Exposed to Hydrocarbon Fuels or Their Surrogates and Their Blends with Oxygenated Additives |
| 452 | SAE AS9015-2007 | 2007-09-01 | English | Supplier Self Verification Process Delegation Programs |
| 453 | SAE AMS-T-7081A-2007 | 2007-09-01 | English | Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality
DoD Adopted |
| 454 | SAE AS4801B-2007 | 2007-09-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90掳 FEMALE |
| 455 | SAE AMS-I-7068A-2007 | 2007-09-01 | English | Ingot, Zinc Alloy (for Sheet Metal Forming Dies)
DoD Adopted |
| 456 | SAE AS4808B-2007 | 2007-09-01 | English | FITTING ASSEMBLY, ELBOW, 45掳, BEAM SEAL, RETAINED NUT |
| 457 | SAE AS85049/109B-A1-2007 | 2007-09-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, MIL-DTL-5015 (SERIES I & II), AS81703 SERIES III, AND MIL-DTL-26482 SERIES II CONNECTORS)
DoD Adopted |
| 458 | SAE AS5681-2007 | 2007-09-01 | English | Minimum Operational Performance Specification for Remote On-Ground Ice Detection Systems |
| 459 | SAE AMS-QQ-A-250/10A-2007 | 2007-09-01 | English | Aluminum Alloy 5454, Plate and Sheet - UNS A95454
DoD Adopted |
| 460 | SAE AS5227A-2007 | 2007-09-01 | English | Flange, Straight Thread Port, Weld
DoD Adopted |
| 461 | SAE AS9518B-2007 | 2007-09-01 | English | BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1900-32 UNJF-3A
DoD Adopted |
| 462 | SAE AS9526B-2007 | 2007-09-01 | English | BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .7500-16 UNJF-3A
DoD Adopted |
| 463 | SAE AS9524B-2007 | 2007-09-01 | English | BOLT, MACHINE - HEXAGON HEAD, STEEL, CADMIUM PLATED, UNS G87400, 125 KSI MIN, .5625-18 UNJF-3A
DoD Adopted |
| 464 | SAE AMS-QQ-A-200/6B-2007 | 2007-09-01 | English | Aluminum Alloy 5454, Bar, Rod, Shapes, Tube, and Wire, Extruded - UNS A95454
DoD Adopted |
| 465 | SAE AS9520B-2007 | 2007-09-01 | English | BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3125-24 UNJF-3A
DoD Adopted |
| 466 | SAE AS5004C-2007 | 2007-09-01 | English | FITTING, TEE, BEAM SEAL, BULKHEAD ON SIDE |
| 467 | SAE AS5003C-2007 | 2007-09-01 | English | FITTING, TEE, BEAM SEAL, BULKHEAD ON RUN |
| 468 | SAE MAM2262D-2007 | 2007-09-01 | English | Tolerances, Metric Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate |
| 469 | SAE J882-2007 | 2007-09-01 | English | Test Method for Measuring Thickness of Automotive Textiles and Plastics |
| 470 | SAE MA3430A-2007 | 2007-09-01 | English | NUT, SELF LOCKING-REDUCED HEX DRIVE, AMS 6322, CADMIUM PLATED, MJ THREAD, METRIC |
| 471 | SAE J2024-2007 | 2007-09-01 | English | Contaminants for Testing Air Brake Components and Auxiliary Pneumatic Devices鈥擳ruck and Bus |
| 472 | SAE AS5002C-2007 | 2007-09-01 | English | FITTING, ELBOW, 90掳, BEAM SEAL |
| 473 | SAE MA3425A-2007 | 2007-09-01 | English | Nut, Castellated, Hex - UNS G87400, Cadmium Plate, MJ Thread, Metric
DoD Adopted |
| 474 | SAE MA3421A-2007 | 2007-09-01 | English | Nut, Plain Hex - Drld, UNS G87400, Cadmium Plate, MJ Thread, Metric
DoD Adopted |
| 475 | SAE AS39029/20A-2007 | 2007-09-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-C-81511 SERIES 3 CONNECTORS)
DoD Adopted |
| 476 | SAE MAM2242D-2007 | 2007-09-01 | English | Tolerances, Metric Corrosion and Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, and Plate
DoD Adopted |
| 477 | SAE AIR1539B-2007 | 2007-09-01 | English | (R) Environmental Control System Contamination |
| 478 | SAE MAM2263B-2007 | 2007-09-01 | English | Tolerances, Metric Nickel, Nickel Alloy, and Cobalt Alloy Tubing |
| 479 | SAE AS9521B-2007 | 2007-09-01 | English | BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .3750-24 UNJF-3A
DoD Adopted |
| 480 | SAE AS9527A-2007 | 2007-09-01 | English | SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1380-40 UNJF-3A
DoD Adopted |
| 481 | SAE AS9523B-2007 | 2007-09-01 | English | BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A
DoD Adopted |
| 482 | SAE AS9525B-2007 | 2007-09-01 | English | BOLT, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .6250-18 UNJF-3A
DoD Adopted |
| 483 | SAE AS9529A-2007 | 2007-09-01 | English | BOLT, MACHINE - STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .1900-32 UNJF-3A
DoD Adopted |
| 484 | SAE AS9528A-2007 | 2007-09-01 | English | SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE, HEXAGON HEAD, .164-36 UNJF-3A
DoD Adopted |
| 485 | SAE AMS4006K-2007 | 2007-09-01 | English | Aluminum Alloy, Sheet and Plate 1.25Mn - 0.12Cu (3003-0) Annealed - UNS A93003 |
| 486 | SAE AIR1064D-2007 | 2007-09-01 | English | (R) Braking System Dynamics |
| 487 | SAE MAM2243D-2007 | 2007-09-01 | English | Tolerances, Metric Corrosion and Heat Resistant Steel Tubing
DoD Adopted |
| 488 | SAE J1260-2007 | 2007-08-01(R 2019) | English | Standard Oil Filter Test Oil |
| 489 | SAE AS4475B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT FEMALE |
| 490 | SAE AS4478B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE |
| 491 | SAE AS4477B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 90° FEMALE |
| 492 | SAE AS4476B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT MALE TO 45° FEMALE |
| 493 | SAE AMS5334H-2007 | 2007-08-01(R 2013) | English | Steel, Investment Castings 0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized and Tempered - UNS J13042 |
| 494 | SAE AS4474B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 90° TO 90° |
| 495 | SAE AS4473B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45° TO 90° |
| 496 | SAE AS4472B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, 45° TO 45° |
| 497 | SAE AS4471B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 90° |
| 498 | SAE AS4470B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO 45° |
| 499 | SAE AS4469B-2007 | 2007-08-01(R 2013) | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FLARELESS, POTABLE WATER, STRAIGHT TO STRAIGHT |
| 500 | SAE AMS5333F-2007 | 2007-08-01(R 2013) | English | Steel, Investment Castings 0.50Cr - 0.55Ni - 0.25Mo (0.11 - 0.17C) (SAE 8615) Normalized - UNS J11442 |
|