| Pos | standard Number | publication date | Language | Description |
| 1 | SAE AS85049/91C-2010 | 2010-09-01 | English | (R) CONNECTOR ACCESSORIES, COMPOSITE, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 2 | SAE AS6107-2010 | 2010-09-01 | English | FITTING ASSEMBLY, ADAPTER, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| 3 | SAE AS6106-2010 | 2010-09-01 | English | FITTING ASSEMBLY, ADAPTER, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 4 | SAE J1294-2010 | 2010-09-01 | English | Ignition Distributors-Marine |
| 5 | SAE ARP1915D-2010 | 2010-09-01 | English | Aircraft Tow Bar |
| 6 | SAE AMS-S-83474A-2010 | 2010-09-01 | English | Shims, Molded, Filled Resin Compound and Sheet Prepeg
DoD Adopted |
| 7 | SAE J2111-2010 | 2010-09-01 | English | Headlamp Cleaners |
| 8 | SAE AS39029/76A-2010 | 2010-09-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES I, II, III, IV CONNECTORS)
DoD Adopted |
| 9 | SAE ARP5602-2010 | 2010-09-01 | English | A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education |
| 10 | SAE AS85049/92B-2010 | 2010-09-01 | English | (R) CONNECTOR ACCESSORIES, COMPOSITE, ELECTRICAL, STRAIN RELIEF, 90 DEGREES, SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 11 | SAE R-388-2010 | 2010-08-19 | English | Engine Combustion: Pressure Measurement and Analysis - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 12 | SAE CS 1939-2010 | 2010-08-17 | English | Companion Spreadsheet (J1939) - See Also SAE J1939 |
| 13 | SAE J2012DA-2010 | 2010-08-16 | English | Digital Annex of Diagnostic Trouble Code Definitions and Failure Type Byte Definitions - See Also SAE J2012 |
| 14 | SAE AMS3726D-2010 | 2010-08-01 | English | Shims, Filled Resin Compound
DoD Adopted |
| 15 | SAE AMS4946C-2010 | 2010-08-01 | English | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Texture Controlled Cold Worked, Stress Relieved - UNS R56320 |
| 16 | SAE AMS5608F-2010 | 2010-08-01 | English | Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated - UNS R30188
DoD Adopted |
| 17 | SAE AMS5889C-2010 | 2010-08-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed - UNS N06617
DoD Adopted |
| 18 | SAE AMS5896B-2010 | 2010-08-01 | English | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper - UNS S32100
DoD Adopted |
| 19 | SAE AMS6946B-2010 | 2010-08-01 | English | Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed - UNS R54250 |
| 20 | SAE AS1650B-2010 | 2010-08-01 | English | (R) Coupling Assembly, Threadless, Flexible, Fixed Cavity, Self-Bonding, Procurement Specification |
| 21 | SAE AS1986D-2010 | 2010-08-01 | English | FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/
DoD Adopted |
| 22 | SAE AS5986B-2010 | 2010-08-01 | English | FITTING ASSEMBLY, ADAPTER RING LOCKED PORT CONNECTION TO BEAM SEAL 4000 PSI AND 5000 PSI /9/ |
| 23 | SAE AS150426 THRU AS150450B-2010 | 2010-08-01 | English | NUT 鈥?HEX, CHECK
DoD Adopted |
| 24 | SAE J129-2010 | 2010-08-01 | English | (R) Engine and Transmission Identification Numbers |
| 25 | SAE J343-2010 | 2010-08-01 | English | Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
DoD Adopted |
| 26 | SAE J1113-2-2010 | 2010-08-01 | English | Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft)鈥擟onducted Immunity, 15 Hz to 250 kHz鈥擜ll Leads |
| 27 | SAE J1113-3-2010 | 2010-08-01 | English | Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power |
| 28 | SAE J1113-22-2010 | 2010-08-01 | English | Electromagnetic Compatibility Measurement Procedure for Vehicle Components鈥擯art 22鈥擨mmunity to Radiated Magnetic Fields |
| 29 | SAE J1319-2010 | 2010-08-01 | English | (R) Rear Fog Lamp Systems |
| 30 | SAE MA3302B-2010 | 2010-08-01 | English | NUT, PLAIN HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
DoD Adopted |
| 31 | SAE J2869-2010 | 2010-08-01 | English | Mechanical Systems Physics-of-Failure Analysis Experimental Validation |
| 32 | SAE J2387-2010 | 2010-08-01 | English | Dimensions and Tolerances for Coolant System Hoses |
| 33 | SAE AIR5742-2010 | 2010-08-01 | English | Packaging and Transportation of Oxygen Equipment |
| 34 | SAE AMS2453-2010 | 2010-08-01 | English | Low Stress Grinding of Steel Parts Heat Treated to 180 ksi or Over, and Low Stress Grinding of Chrome Plating Applied to Steel Parts Heat Treated to 180 ksi or Over |
| 35 | SAE AMS2303F-2010 | 2010-08-01 | English | Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure
DoD Adopted |
| 36 | SAE AMS2304B-2010 | 2010-08-01 | English | Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure |
| 37 | SAE PT-144-2010 | 2010-08-01 | English | Automotive Electronics Reliability, Volume 2 |
| 38 | SAE J2505-2010 | 2010-08-01 | English | Measurement of Vehicle-Roadway Frictional Drag |
| 39 | SAE AIR825/3-2010 | 2010-08-01 | English | Gaseous Oxygen and Oxygen Equipment, Introductory |
| 40 | SAE J2789-2010 | 2010-08-01 | English | Inertia Calculation for Single-Ended Inertia-Dynamometer Testing |
| 41 | SAE AIR5373A-2010 | 2010-08-01 | English | (R) Fuels in Ground Support Equipment (Other Than Gasoline or Diesel) |
| 42 | SAE ARP5812-2010 | 2010-08-01 | English | Actuators, Linear Mechanical, General Specification Guide |
| 43 | SAE AMS5926-2010 | 2010-08-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Tubing, and Forgings 15.5Cr 鈥?1.5Si 鈥?0.3Mo 鈥?0.1N (0.45 鈥?0.60C) for Bearing Applications - UNS S42716 |
| 44 | SAE AMS5562E-2010 | 2010-08-01 | English | Steel, Corrosion and Heat Resistant, Seamless Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat Treated - UNS S21904
DoD Adopted |
| 45 | SAE AS172236 THRU AS172270C-2010 | 2010-08-01 | English | NUT, SPANNER, BEARING RETAINING, AERONAUTICAL, UNS G41400
DoD Adopted |
| 46 | SAE AIR5373A-2010 | 2010-08-01 | English | (R) Fuels in Ground Support Equipment (Other Than Gasoline or Diesel) |
| 47 | SAE AMS2453-2010 | 2010-08-01 | English | Low Stress Grinding of Steel Parts Heat Treated to 180 ksi or Over, and Low Stress Grinding of Chrome Plating Applied to Steel Parts Heat Treated to 180 ksi or Over |
| 48 | SAE MA3353B-2010 | 2010-08-01 | English | NUT, SELF LOCKING - SPLINE DRIVE, EXTENDED WASHER, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
DoD Adopted |
| 49 | SAE AMS2300L-2010 | 2010-08-01 | English | Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure
DoD Adopted |
| 50 | SAE AMS5035B-2010 | 2010-08-01 | English | Steel, Welding Wire 0.65Si - 1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) - UNS K23015 |
| 51 | SAE AIR4246C-2010 | 2010-08-01 | English | (R) Contaminants for Aircraft Turbine Engine Fuel System Component Testing |
| 52 | SAE AMS2301K-2010 | 2010-08-01 | English | Steel Cleanliness, Aircraft Quality Magnetic Particle Inspection Procedure
DoD Adopted |
| 53 | SAE AS5710A-2010 | 2010-08-01 | English | (R) JAUS Core Service Set |
| 54 | SAE AMS4396F-2010 | 2010-08-01 | English | Magnesium Alloy Welding Wire 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A) - UNS M12331 |
| 55 | SAE AMS5896B-2010 | 2010-08-01 | English | Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (321) Solution Heat Treated and Cold Drawn, 1/8 Hard Temper - UNS S32100 |
| 56 | SAE AMS5889C-2010 | 2010-08-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed - UNS N06617 |
| 57 | SAE J2869-2010 | 2010-08-01 | English | Mechanical Systems Physics-of-Failure Analysis Experimental Validation |
| 58 | SAE ARP5369A-2010 | 2010-08-01 | English | Guidelines for Wire Identification Marking Using the Hot Stamp Process |
| 59 | SAE AIR825/3-2010 | 2010-08-01 | English | Gaseous Oxygen and Oxygen Equipment, Introductory |
| 60 | SAE AMS2303F-2010 | 2010-08-01 | English | Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure |
| 61 | SAE AMS3255A-2010 | 2010-08-01 | English | (R) Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant |
| 62 | SAE J1402-2010 | 2010-08-01 | English | Automotive Air Brake Hose and Hose Assemblies
DoD Adopted |
| 63 | SAE J1400-2010 | 2010-08-01 | English | (R) Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assemblies |
| 64 | SAE ARP5812-2010 | 2010-08-01 | English | Actuators, Linear Mechanical, General Specification Guide |
| 65 | SAE AMS4048N-2010 | 2010-08-01 | English | Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) Annealed or when specified, 鈥淎s Fabricated鈥?(Alclad 7075-F) - UNS A97075 |
| 66 | SAE MA3354B-2010 | 2010-08-01 | English | NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC
DoD Adopted |
| 67 | SAE ARP6137-2010 | 2010-08-01 | English | Tire Pressure Monitoring Systems (TPMS) for Aircraft |
| 68 | SAE AMS5121K-2010 | 2010-08-01 | English | Sheet and Strip, Steel (0.90 - 1.04C) (SAE 1095) Annealed - UNS G10950
DoD Adopted |
| 69 | SAE J1279-2010 | 2010-08-01 | English | Snowmobile Drive Mechanisms |
| 70 | SAE AS7928/1C-2010 | 2010-08-01 | English | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 DEGREES C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 71 | SAE J1926-4-2010 | 2010-08-01 | English | Connector for Fluid Power and General Use鈥擯orts and Stud End with ASME B1.1 Threads and O-Ring Seal鈥擯art 4: External Hex and Internal Hex Inch Port Plugs鈥擠imensions, Design, Test Methods and Requirements |
| 72 | SAE J593-2010 | 2010-08-01 | English | Backup Lamp (Reversing Lamp)
DoD Adopted |
| 73 | SAE J92-2010 | 2010-08-01 | English | Snowmobile Throttle Control Systems |
| 74 | SAE J1113-24-2010 | 2010-08-01 | English | Immunity to Radiated Electromagnetic Fields; 10 kHz to 200 MHz鈥擟rawford TEM Cell and 10 kHz to 5 GHz鈥擶ideband TEM Cell |
| 75 | SAE AS9696C-2010 | 2010-08-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .1900-32 UNJF-3A
DoD Adopted |
| 76 | SAE J1754-2-2010 | 2010-08-01 | English | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 2: Ordering Information
DoD Adopted |
| 77 | SAE AS21240-2010 | 2010-08-01 | English | BEARING, SLEEVE, PLAIN, SELF 鈥?LUBRICATING -65 TO +250 掳F
DoD Adopted |
| 78 | SAE J1754-3-2010 | 2010-08-01 | English | Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information |
| 79 | SAE AS5710A-2010 | 2010-08-01 | English | (R) JAUS Core Service Set |
| 80 | SAE AS8943-2010 | 2010-08-01 | English | Bearings, Sleeve, Plain and Flanged, Self 鈥?Lubricating -65 to +250 degrees F
DoD Adopted |
| 81 | SAE AIR825/3-2010 | 2010-08-01 | English | Gaseous Oxygen and Oxygen Equipment, Introductory |
| 82 | SAE AS6141-2010 | 2010-08-01 | English | FITTING, UNION AND REDUCER, FLARELESS, PRECISION TYPE |
| 83 | SAE J277-2010 | 2010-08-01 | English | Maintenance of Design Voltage鈥擲nowmobile Electrical Systems |
| 84 | SAE J1298-2010 | 2010-08-01 | English | Connections for Fluid Power and General Use - Hydraulic Couplings - Diagnostic Port Sizes and Locations |
| 85 | SAE AS21241-2010 | 2010-08-01 | English | BEARING, SLEEVE, FLANGED, SELF 鈥?LUBRICATING -65 TO +250 DEGREES F
DoD Adopted |
| 86 | SAE AS7475D-2010 | 2010-08-01 | English | Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30159, Tensile Strength 260 ksi, Procurement Specification
DoD Adopted |
| 87 | SAE AS6140-2010 | 2010-08-01 | English | NUT, SPANNER BEARING RETAINING, PHOSPHATE TREATED AERONAUTICAL, UNS G41400
DoD Adopted |
| 88 | SAE AS595D-2010 | 2010-08-01 | English | (R) Aerospace 鈥?Civil Type Variable Delivery, Pressure Compensated, Hydraulic Pump |
| 89 | SAE AMS4396F-2010 | 2010-08-01 | English | Magnesium Alloy Welding Wire 3.2 Rare Earths - 2.5Zn - 0.72Zr (EZ33A) - UNS M12331 |
| 90 | SAE AS6062-2010 | 2010-07-01 | English | JAUS Mission Spooling Service Set |
| 91 | SAE AS5768/1A-A1-2010 | 2010-07-01 | English | Tool, Stripper, Manually Actuated, Electrical Insulation, Round Wire, Size 10 To 30 |
| 92 | SAE J2577-2010 | 2010-07-01 | English | Heavy Duty Lamp Electrical Connector Standard |
| 93 | SAE AS85049/109B-A3-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Backshell, Straight, Self-locking and non-self-locking, Pre-attached shield termination, (EMI/RFI), Boot accommodation, Category 3B (For MIL-DTL-83723 Series III, MIL-DTL-5015 Series I and II, AS81703 Series III, and MIL-DTL-26482 Series II Connectors)
DoD Adopted |
| 94 | SAE AS1007H-2010 | 2010-07-01 | English | FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS
DoD Adopted |
| 95 | SAE J96-2010 | 2010-07-01 | English | Flashing Warning Lamp for Industrial Equipment
DoD Adopted |
| 96 | SAE AS85049/111B-A2-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Backshell, 90 degrees, Self-locking and non-self-locking, Pre-attached shield termination, (EMI/RFI), Boot accommodation, Category 3B (For MIL-DTL-83723 Series III, MIL-DTL-5015 Series I and II, AS81703 Series III, and MIL-DTL-26482 Series II Connectors)
DoD Adopted |
| 97 | SAE AS85049/112B-A2-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Backshell, Straight, Self-locking and non-self-locking, Pre-attached shield termination, (EMI/RFI), Boot accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 98 | SAE AS85049/114B-A2-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Backshell, 90 Degree, Self-locking and non-self-locking, Pre-attached shield termination, (EMI/RFI), Boot accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 99 | SAE AS85049/115B-A2-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Backshell, Straight, Self-locking and Non-self-locking, Pre-attached shield termination, (EMI/RFI), Boot accommodation, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
DoD Adopted |
| 100 | SAE AMS4989B-2010 | 2010-07-01 | English | Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed - UNS R56320 |
| 101 | SAE AS5684A-2010 | 2010-07-01 | English | (R) JAUS Service Interface Definition Language |
| 102 | SAE AS5750A-2010 | 2010-07-01 | English | Loss Budget Specification for Fiber Optic Links
DoD Adopted |
| 103 | SAE AS9902D-2010 | 2010-07-01 | English | PLUG, MACHINE THREAD DRILLED, PREFORMED PACKING, AS8879 THREAD (UNS S34700)
DoD Adopted |
| 104 | SAE AMS3337E-2010 | 2010-07-01 | English | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75
DoD Adopted |
| 105 | SAE AMS6477B-2010 | 2010-07-01 | English | Steel, Bars, Forgings, and Tubing 0.80Cr (0.90 - 1.03C) For Bearing Applications - UNS G51985
DoD Adopted |
| 106 | SAE AMS-S-4383A-2010 | 2010-07-01 | English | (R) Sealing Compound, Topcoat, Fuel Tank Buna-N Type
DoD Adopted |
| 107 | SAE AS5000C-2010 | 2010-07-01 | English | Fitting, Plug-in Union, Ring Locked, 24 Degree Cone, Fluid Connection, 5080 psi (35 000 kPa), Specification for |
| 108 | SAE AS5551A-2010 | 2010-07-01 | English | Fitting Assembly 鈥?24Degree Cone Flareless per AS5827, 5080 psi, Port Connection Port Preparation, Installation and Removal of AS5550 and AS5865 |
| 109 | SAE AS3563C-2010 | 2010-07-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, EXTENDED WRENCH PAD, 160 KSI, 800 DEGREES F, UNS S66286 |
| 110 | SAE J1594-2010 | 2010-07-01 | English | (R) Vehicle Aerodynamics Terminology |
| 111 | SAE AMS6945A-2010 | 2010-07-01 | English | Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed - UNS R56400 |
| 112 | SAE J2891-2010 | 2010-07-01 | English | Auxiliary Power Unit Electrical Interface Requirements for Class Eight Trucks |
| 113 | SAE AS3564C-2010 | 2010-07-01 | English | NUT, SELF-LOCKING, DOUBLE HEXAGON, SOLID FILM LUBRICATED, COUNTERBORED, 160 KSI, 800 DEGREES F, UNS S66286 |
| 114 | SAE AIR5919A-2010 | 2010-07-01 | English | (R) Alternatives to Cadmium Plating |
| 115 | SAE AIR1594C-2010 | 2010-07-01 | English | Plain Bearing Selection for Landing Gear Applications |
| 116 | SAE AMS1427B-2010 | 2010-07-01 | English | Deicing/Anti-icing Fluid, Aircraft Propylene Glycol Base |
| 117 | SAE ARP5257B-2010 | 2010-07-01 | English | Tire Overspeed Landing Test |
| 118 | SAE AMS3656G-2010 | 2010-07-01 | English | Polytetrafluoroethylene (PTFE) Extrusions Normal Strength, As Sintered
DoD Adopted |
| 119 | SAE J2873-2010 | 2010-07-01 | English | Electric Drive Cooling Fan Motor Mounting |
| 120 | SAE ARP4386C-2010 | 2010-07-01 | English | (R) Terminology and Definitions for Aerospace Fluid Power, Actuation and Control Technologies
DoD Adopted |
| 121 | SAE AS85049/56-A1-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Strain Relief, Straight, Category 4C (For MIL-DTL- 38999 Series I and II Connectors)
DoD Adopted |
| 122 | SAE AS9902D-2010 | 2010-07-01 | English | PLUG, MACHINE THREAD DRILLED, PREFORMED PACKING, AS8879 THREAD (UNS S34700) |
| 123 | SAE AS85049/117B-A2-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Backshell, 90 Degree, Self-locking and Non-self-locking, Pre-attached shield termination, (EMI/RFI), Boot accommodation, Category 3B (For MIL-DTL-38999 Series III and IV Connectors)
DoD Adopted |
| 124 | SAE AS39029/60A-2010 | 2010-07-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
DoD Adopted |
| 125 | SAE AMS6512F-2010 | 2010-07-01 | English | Steel, Bars, Forgings, Tubing, and Rings 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed - UNS K92890 |
| 126 | SAE ARP1247D-2010 | 2010-07-01 | English | Aircraft Ground Support Equipment — General Requirements
DoD Adopted |
| 127 | SAE AMS5938-2010 | 2010-07-01 | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 10Cr - 12Ni - 2Mo 鈥?1.45Al 鈥?1.15Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S11902 |
| 128 | SAE AMS6499-2010 | 2010-07-01 | English | Steel, Bars, Forgings, and Tubing 2.7Si - 0.85Cr - 1.8Ni - 0.4Mo 鈥?0.2V 鈥?(0.37 - 0.44C) Double Vacuum Melted - UNS K54015 |
| 129 | SAE AMS6514G-2010 | 2010-07-01 | English | Steel, Maraging, Bars, Forgings, Tubing, and Rings 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed - UNS K93120 |
| 130 | SAE AS85049/55B-A2-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Strain Relief, Non-environmental, 90 Degrees, Self-locking and Non-self-locking, Category 4C (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
DoD Adopted |
| 131 | SAE AS85049/54A-A1-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Strain Relief, Non-environmental, 45 Degrees, Category 4C (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
DoD Adopted |
| 132 | SAE AS3486D-2010 | 2010-07-01 | English | NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 KSI/800 DEGREES F
DoD Adopted |
| 133 | SAE AMS2768C-2010 | 2010-07-01 | English | Heat Treatment of Magnesium Alloy Castings |
| 134 | SAE AMS5410B-2010 | 2010-07-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr Vacuum Melted, Vacuum Cast As Cast, or Solution Treated, or Solution and Precipitation Hardened |
| 135 | SAE AS50881D-2010 | 2010-07-01 | English | Wiring Aerospace Vehicle
DoD Adopted |
| 136 | SAE AS5750A-2010 | 2010-07-01 | English | Loss Budget Specification for Fiber Optic Links |
| 137 | SAE AMS5935-2010 | 2010-07-01 | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 10Ni - 2Mo - 0.9Al - 0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S10120 |
| 138 | SAE AS85049/53A-A1-2010 | 2010-07-01 | English | Connector Accessories, Electrical, Strain Relief, Non-environmental, Straight, Category 4C (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
DoD Adopted |
| 139 | SAE ARP5257B-2010 | 2010-07-01 | English | Tire Overspeed Landing Test |
| 140 | SAE J361-2010 | 2010-06-01(R 2013) | English | Procedure for Visual Evaluation of Interior and Exterior Automotive Trim |
| 141 | SAE AMS4922C-2010 | 2010-06-01(R 2012) | English | Titanium Alloy, Seamless, Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and Precipitation Heat Treated - UNS R58153(DoD Adopted) |
| 142 | SAE AIR825/14-2010 | 2010-06-01 | English | Basic Aircraft Oxygen Systems Design |
| 143 | SAE AS3322D-2010 | 2010-06-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .375-16UNJC X .375-24UNJF
DoD Adopted |
| 144 | SAE AMS2175A-2010 | 2010-06-01 | English | Castings, Classification and Inspection of
DoD Adopted |
| 145 | SAE AS7456B-2010 | 2010-06-01 | English | Studs, Steel, Low Alloy Heat Treated, Roll Threaded
DoD Adopted |
| 146 | SAE J443-2010 | 2010-06-01 | English | (R) Procedures for Using Standard Shot Peening Almen Strip |
| 147 | SAE AS3321D-2010 | 2010-06-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .3125-18UNJC X .3125-24UNJF
DoD Adopted |
| 148 | SAE AS14104D-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO +325 DEGREES F
DoD Adopted |
| 149 | SAE ARP5526B-2010 | 2010-06-01 | English | (R) Aircraft Seat Design Guidance and Clarifications |
| 150 | SAE AMS3669F-2010 | 2010-06-01 | English | Polytetrafluoroethylene (PTFE) Sheet, Molded Premium Grade, As Sintered |
| 151 | SAE AS14102D-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO +325 DEGREES F
DoD Adopted |
| 152 | SAE AS14101D-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 DEGREES F
DoD Adopted |
| 153 | SAE ARP5583A-2010 | 2010-06-01 | English | (R) Guide to Certification of Aircraft in a High-Intensity Radiated Field (HIRF) Environment |
| 154 | SAE J444-2010 | 2010-06-01 | English | Cast Shot and Grit Size Specifications for Peening and Cleaning |
| 155 | SAE AS3320D-2010 | 2010-06-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF
DoD Adopted |
| 156 | SAE J1113-28-2010 | 2010-06-01 | English | Electromagnetic Compatibility Measurements Procedure for Vehicle Components鈥擯art 28鈥?Immunity to Radiated Electromagnetic Fields鈥擱everberation Method (Mode Tuning) |
| 157 | SAE AS3319D-2010 | 2010-06-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .190-24UNJC X .190-32UNJF
DoD Adopted |
| 158 | SAE AS1895/14D-2010 | 2010-06-01 | English | (R) FLANGE END, MALE, TYPE II LOW PROFILE DESIGN STANDARD
DoD Adopted |
| 159 | SAE AS1895/15E-2010 | 2010-06-01 | English | (R) FLANGE END, FEMALE, TYPE II LOW PROFILE DESIGN STANDARD
DoD Adopted |
| 160 | SAE AS1895/12D-2010 | 2010-06-01 | English | (R) FLANGE END, MALE, TYPE I STANDARD PROFILE, DESIGN STANDARD
DoD Adopted |
| 161 | SAE AS1895/13D-2010 | 2010-06-01 | English | (R) FLANGE END, FEMALE, TYPE I STANDARD PROFILE DESIGN STANDARD
DoD Adopted |
| 162 | SAE AS7472A-2010 | 2010-06-01 | English | (R) Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded
DoD Adopted |
| 163 | SAE AS14103E-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 degrees F
DoD Adopted |
| 164 | SAE AMS5840E-2010 | 2010-06-01 | English | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted - UNS S13889
DoD Adopted |
| 165 | SAE J2890-2010 | 2010-06-01 | English | Hydraulic Fluid Power - Accelerated Method for Determining the Wear Characteristics of a Hydraulic Component Due to Contaminants |
| 166 | SAE J2881-2010 | 2010-06-01 | English | Measurement of Aerodynamic Performance for Mass-Produced Cars and Light-Duty Trucks |
| 167 | SAE AS85049/83A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, 45 Degrees, Self-locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
DoD Adopted |
| 168 | SAE J1711-2010 | 2010-06-01 | English | (R) Recommended Practice for Measuring the Exhaust Emissions and Fuel Economy of Hybrid-Electric Vehicles, Including Plug-in Hybrid Vehicles |
| 169 | SAE J551-1-2010 | 2010-06-01 | English | (R) Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), and Machines (16.6 Hz to 18 GHz) |
| 170 | SAE J361-2010 | 2010-06-01 | English | Procedure for Visual Evaluation of Interior and Exterior Automotive Trim |
| 171 | SAE J2847-1-2010 | 2010-06-01 | English | Communication between Plug-in Vehicles and the Utility Grid |
| 172 | SAE ARP6137-2010 | 2010-06-01 | English | Tire Pressure Monitoring Systems (TPMS) for Aircraft |
| 173 | SAE ARP987B-2010 | 2010-06-01 | English | (R) The Control of Excess Humidity in Avionics Cooling |
| 174 | SAE ARP6068-2010 | 2010-06-01 | English | Gas Turbine Engine Test Facility Vibration Measurement |
| 175 | SAE AMS5590F-2010 | 2010-06-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 Degree F (1066 Degrees C) Solution Heat Treated - UNS N07718
DoD Adopted |
| 176 | SAE AMS5694J-2010 | 2010-06-01 | English | Steel, Corrosion and Heat-Resistant, Welding Wire 27Cr - 21.5Ni - UNS S31080
DoD Adopted |
| 177 | SAE AMS3660D-2010 | 2010-06-01 | English | Polytetrafluoroethylene (PTFE) Moldings General Purpose Grade, As Sintered |
| 178 | SAE AMS6324H-2010 | 2010-06-01 | English | Steel Bars, Forgings, and Tubing 0.65Cr 鈥?0.70Ni 鈥?0.25Mo (0.38 鈥?0.43C) - UNS K11640
DoD Adopted |
| 179 | SAE AS85049/86A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, 45 Degrees, Self-locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 180 | SAE AS85049/85A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, Straight, Self-locking, Shield Band Termination (RFI/EMI), Shrink Boot Accommodation, Category 3B (For MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 181 | SAE J2663-2010 | 2010-06-01 | English | Test Procedure to Measure Permeation of Elastomeric Hose or Tube by Weight Loss |
| 182 | SAE AMS4942F-2010 | 2010-06-01 | English | Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength - UNS R50400
DoD Adopted |
| 183 | SAE AS85049/84A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, 90 Degrees, Self-locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
DoD Adopted |
| 184 | SAE ARP4101/5A-2010 | 2010-06-01 | English | Aircraft Circuit Breaker and Fuse Arrangement |
| 185 | SAE AS85049/69A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-38999 Series III and IV Connectors)
DoD Adopted |
| 186 | SAE J2192-2010 | 2010-06-01 | English | Recommended Testing Methods for Physical Protection of Wiring Harnesses |
| 187 | SAE AS85049/82A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, Straight, Self-locking, Shield Band Termination (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-5015 Crimp, MIL-DTL-26482 Series 2, AS81703 Series 3 and MIL-DTL-83723 Series III Connectors)
DoD Adopted |
| 188 | SAE AS85049/79A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, Environmental, 90 Degrees, Shield Termination, Non-self-locking, Category 2B (For MIL-DTL-38999 Series III and IV Connectors)
DoD Adopted |
| 189 | SAE AS85049/78A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, Environmental, 45 Degrees, Shield Termination, Non-self-locking, Category 2B (For MIL-DTL-38999 Series III and IV Connectors)
DoD Adopted |
| 190 | SAE AS85049/77A-A1-2010 | 2010-06-01 | English | Connector Accessories, Electrical, Backshell, Environmental, 45 Degrees, Shield Termination, Non-self-locking, Category 2B (For MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 191 | SAE MS1005-2010 | 2010-06-01 | English | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids鈥擲pecification |
| 192 | SAE AS33700A-2010 | 2010-06-01 | English | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 12
DoD Adopted |
| 193 | SAE J2752-2010 | 2010-06-01 | English | Personnel Protection - Compact Tool Carriers |
| 194 | SAE AIR825/14-2010 | 2010-06-01 | English | Basic Aircraft Oxygen Systems Design |
| 195 | SAE AMS5763D-2010 | 2010-06-01 | English | Steel, Corrosion Resistant Bars, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.50Cb (Nb) - 1.5Cu Solution Heat Treated - UNS S45000
DoD Adopted |
| 196 | SAE AS33703A-2010 | 2010-06-01 | English | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 37
DoD Adopted |
| 197 | SAE ARP5305-2010 | 2010-06-01 | English | Structural Design and Construction Considerations for Enclosed Turbofan/Turbojet Engine Test Cells |
| 198 | SAE AS81820/3C-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 DEGREES F
DoD Adopted |
| 199 | SAE AIR5567A-2010 | 2010-06-01 | English | Test Method for Catalytic Carbon Brake Disk Oxidation |
| 200 | SAE AS81820/4C-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO +325 degrees F
DoD Adopted |
| 201 | SAE AS81820/2C-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO +325 DEGREES F
DoD Adopted |
| 202 | SAE J2752-2010 | 2010-06-01 | English | Personnel Protection - Compact Tool Carriers |
| 203 | SAE AS81820/1C-2010 | 2010-06-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 DEGREES F
DoD Adopted |
| 204 | SAE ARP987B-2010 | 2010-06-01 | English | (R) The Control of Excess Humidity in Avionics Cooling |
| 205 | SAE J2788-2010 | 2010-06-01 | English | HFC-134a (R-134a) Recovery/Recycle/Recharging Equipment for Mobile Air-Conditioning Systems |
| 206 | SAE AMS2175A-2010 | 2010-06-01 | English | Castings, Classification and Inspection of |
| 207 | SAE AIR744C-2010 | 2010-06-01 | English | Aerospace Auxiliary Power Sources |
| 208 | SAE J2728-2010 | 2010-06-01 | English | Heavy Vehicle Event Data Recorder (HVEDR) Standard - Tier 1 |
| 209 | SAE AIR825/14-2010 | 2010-06-01 | English | Basic Aircraft Oxygen Systems Design |
| 210 | SAE AMS4922C-2010 | 2010-06-01 | English | Titanium Alloy, Seamless, Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and Precipitation Heat Treated - UNS R58153
DoD Adopted |
| 211 | SAE AS4704C-2010 | 2010-06-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE |
| 212 | SAE ARP6068-2010 | 2010-06-01 | English | Gas Turbine Engine Test Facility Vibration Measurement |
| 213 | SAE AIR5567A-2010 | 2010-06-01 | English | Test Method for Catalytic Carbon Brake Disk Oxidation |
| 214 | SAE MA5405A-2010 | 2010-06-01 | English | (R) Splices, Fiber Optics, For Aerospace Inter-Connection Systems |
| 215 | SAE MS1001-2010 | 2010-06-01 | English | (R) Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems - Specification |
| 216 | SAE AS5756/7-2010 | 2010-06-01 | English | CABLE, LOW INDUCTANCE, 270 VOLT DC |
| 217 | SAE AMS4922C-2010 | 2010-06-01 | English | Titanium Alloy, Seamless, Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and Precipitation Heat Treated - UNS R58153 |
| 218 | SAE AS39029/59A-2010 | 2010-06-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
DoD Adopted |
| 219 | SAE/TP 2010-01-1563-2010 | 2010-05-05 | English | Emission Measurements of the AI-14RA Aviation Engine in stationary test and under Real Operating Conditions of PZL-104 ‘Wilga’ Plane |
| 220 | SAE J1930DA-2010 | 2010-05-03 | English | J1930 Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms Web Tool Spreadsheet |
| 221 | SAE AMS2759/7B-2010 | 2010-05-01(R 2014) | English | Carburizing and Heat Treatment of Carburizing Grade Steel Parts(DoD Adopted) |
| 222 | SAE AMS2759/2F-2010 | 2010-05-01(R 2014) | English | Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher |
| 223 | SAE AMS3658E-2010 | 2010-05-01 | English | Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected |
| 224 | SAE AMS1425D-2010 | 2010-05-01 | English | Deicing Fluid, Aircraft Ethylene Glycol Base |
| 225 | SAE AMS4458-2010 | 2010-05-01 | English | Aluminum Alloy, Plate (2.7 Cu - 1.8 Li - 0.7 Zn) 2099-T86 Solution Heat Treated, Cold Worked and Artificially Aged - UNS A92099 |
| 226 | SAE AS33391A-2010 | 2010-05-01 | English | (R) PLATE, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
DoD Adopted |
| 227 | SAE AS33401A-2010 | 2010-05-01 | English | (R) BULKHEAD BRACKET FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
DoD Adopted |
| 228 | SAE AS33411A-2010 | 2010-05-01 | English | (R) BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS
DoD Adopted |
| 229 | SAE AMS6340A-2010 | 2010-05-01 | English | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Consumable Electrode Vacuum Remelted - UNS K23080 |
| 230 | SAE AMS3657E-2010 | 2010-05-01 | English | Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, As Sintered |
| 231 | SAE ARP5149A-2010 | 2010-05-01 | English | Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground |
| 232 | SAE AMS3331B-2010 | 2010-05-01 | English | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 65 - 75
DoD Adopted |
| 233 | SAE AMS3330B-2010 | 2010-05-01 | English | (R) Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 - 55
DoD Adopted |
| 234 | SAE AMS3329B-2010 | 2010-05-01 | English | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45 - 55
DoD Adopted |
| 235 | SAE J2846-2010 | 2010-05-01 | English | Laboratory Measurement of the Acoustical Performance of Body Cavity Filler Materials |
| 236 | SAE AMS3328B-2010 | 2010-05-01 | English | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 - 45
DoD Adopted |
| 237 | SAE AMS6470M-2010 | 2010-05-01 | English | Steel, Nitriding, Bars, Forgings, and Tubing 1.6 Cr 鈥?0.35Mo 鈥?1.13Al (0.38 鈥?0.43C) (135 Mod) - UNS K24065
DoD Adopted |
| 238 | SAE AMS6471G-2010 | 2010-05-01 | English | Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr 鈥?0.35Mo 鈥?1.13Al (0.38 鈥?0.43C) (135 Mod) Consumable Electrode Vacuum Melted - UNS K24065 |
| 239 | SAE AMS6472E-2010 | 2010-05-01 | English | Steel, Bars and Forgings, Nitriding 1.6Cr 鈥?0.35Mo 鈥?1.1Al (0.38 鈥?0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength - UNS K24065 |
| 240 | SAE AMS3320H-2010 | 2010-05-01 | English | Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced Heat and Weather Resistant 60 - 80
DoD Adopted |
| 241 | SAE AS85049/34A-A1-2010 | 2010-05-01 | English | Connector Accessories, Electrical, Backshell, Non-environmental, Threaded Adapter, Category 3C (For MIL-DTL-26482 Series I Jam Nut Receptacle Connector)
DoD Adopted |
| 242 | SAE AMS6491D-2010 | 2010-05-01 | English | Steel Bars, Forgings, and Tubing 4.1Cr 鈥?4.2Mo 鈥?1.0V (0.80 鈥?0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted - UNS T11350
DoD Adopted |
| 243 | SAE AMS5803F-2010 | 2010-05-01 | English | Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb (Nb) - 3.6Cu Consumable Electrode or Vacuum Induction Melted - UNS S17480
DoD Adopted |
| 244 | SAE AMS3205M-2010 | 2010-05-01 | English | Synthetic Rubber Low-Temperature Resistant 45 - 55
DoD Adopted |
| 245 | SAE AS85049/81A-2010 | 2010-05-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, SEAL PLUG, SIZE 10, CATEGORY 7 (FOR MIL-DTL-38999 CONNECTORS)
DoD Adopted |
| 246 | SAE AS3650A-2010 | 2010-05-01 | English | (R) BOLT, MACHINE 鈥?DOUBLE HEX HEAD, REDUCED SHANK, UNS N07718 鈥?185 KSI |
| 247 | SAE AMS3659E-2010 | 2010-05-01 | English | Polytetrafluoroethylene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved |
| 248 | SAE AS3619-2010 | 2010-05-01 | English | CABLE, SAFETY, FERRULE, ELONGATED NICKEL ALLOY, UNS N06600 |
| 249 | SAE J2909-2010 | 2010-05-01 | English | Light Vehicle Dry Stopping Distance |
| 250 | SAE J1268-2010 | 2010-05-01 | English | Hardenability Bands for Carbon and Alloy H Steels |
| 251 | SAE J2917-2010 | 2010-05-01 | English | Occupant Restraint and Equipment Mounting Integrity 鈥?Frontal Impact System-Level Ambulance Patient Compartment |
| 252 | SAE AMS6294J-2010 | 2010-05-01 | English | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620) - UNS G46200(DoD Adopted) |
| 253 | SAE ARP9137-2010 | 2010-05-01 | English | Guidance for the Application of AQAP 2110 within a 9100 Quality Management System |
| 254 | SAE AIR4566A-2010 | 2010-05-01 | English | Crashworthy Landing Gear Design |
| 255 | SAE AMS2486E-2010 | 2010-05-01 | English | Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
DoD Adopted |
| 256 | SAE J1614-2010 | 2010-05-01 | English | Wiring Distribution Systems for Off-Road, Self-Propelled Work Machines |
| 257 | SAE J567-2010 | 2010-05-01 | English | (R) Light Source Retention System |
| 258 | SAE AS33411B-2010 | 2010-05-01 | English | (R) BRACKET, MOUNTING, PLASTIC FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS(DoD Adopted) |
| 259 | SAE AS1032F-2010 | 2010-05-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON RUN, FLARED
DoD Adopted |
| 260 | SAE J371-2010 | 2010-05-01 | English | Drain, Fill, and Level Plugs for Off-Road, Self-Propelled Work Machines |
| 261 | SAE AMS6412M-2010 | 2010-05-01 | English | Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) - UNS G43370
DoD Adopted |
| 262 | SAE AIR5005A-2010 | 2010-05-01 | English | (R) Aerospace - Commercial Aircraft Hydraulic Systems |
| 263 | SAE J1432-2010 | 2010-05-01 | English | Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width |
| 264 | SAE ARP5481A-2010 | 2010-05-01 | English | Recommended Wheel Tie Bolt Preload Procedure |
| 265 | SAE ARP1270B-2010 | 2010-05-01 | English | (R) Aircraft Cabin Pressurization Criteria |
| 266 | SAE AMS6519C-2010 | 2010-05-01 | English | Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Premium Aircraft-Quality Double Vacuum Melted, Annealed - UNS K92150
DoD Adopted |
| 267 | SAE ARP1178B-2010 | 2010-05-01 | English | (R) Aircraft Evacuation Signal System |
| 268 | SAE AMS6270Q-2010 | 2010-05-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615) - UNS G86150(DoD Adopted) |
| 269 | SAE AMS5854B-2010 | 2010-05-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated - UNS N07716
DoD Adopted |
| 270 | SAE AS3650A-2010 | 2010-05-01 | English | (R) BOLT, MACHINE – DOUBLE HEX HEAD, REDUCED SHANK, UNS N07718 – 185 KSI |
| 271 | SAE ARP1270B-2010 | 2010-05-01 | English | (R) Aircraft Cabin Pressurization Criteria |
| 272 | SAE AS33401A-2010 | 2010-05-01 | English | (R) BULKHEAD BRACKET FOR USE WITH MS3367 PLASTIC TIEDOWN STRAPS |
| 273 | SAE J1810-2010 | 2010-05-01 | English | Electrical Indicating System Specification |
| 274 | SAE J2846-2010 | 2010-05-01 | English | Laboratory Measurement of the Acoustical Performance of Body Cavity Filler Materials |
| 275 | SAE ARP5777-2010 | 2010-05-01 | English | Maintenance and Inspection Procedures for Acme Screw Assemblies |
| 276 | SAE AIR4566A-2010 | 2010-05-01 | English | Crashworthy Landing Gear Design |
| 277 | SAE J517-2010 | 2010-05-01 | English | Hydraulic Hose
DoD Adopted |
| 278 | SAE J2286-2010 | 2010-05-01 | English | Vendor Component Program Data File Interface for OEM Assembly Operations |
| 279 | SAE J371-2010 | 2010-05-01 | English | Drain, Fill, and Level Plugs for Off-Road, Self-Propelled Work Machines |
| 280 | SAE AMS6382N-2010 | 2010-05-01 | English | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed - UNS G41400
DoD Adopted |
| 281 | SAE ARP5777-2010 | 2010-05-01 | English | Maintenance and Inspection Procedures for Acme Screw Assemblies |
| 282 | SAE J2551-2010 | 2010-05-01 | English | Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications |
| 283 | SAE AMS5922A-2010 | 2010-05-01 | English | Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed - UNS S10500 |
| 284 | SAE AMS2580-2010 | 2010-05-01 | English | Shot Peening, Ultrasonically Activated |
| 285 | SAE J1383-2010 | 2010-05-01 | English | Performance Requirements for Motor Vehicle Headlamps
DoD Adopted |
| 286 | SAE AMS2585-2010 | 2010-05-01 | English | Shot Peening Media, Ultrasonically Activated |
| 287 | SAE AS23190A-2010 | 2010-05-01 | English | (R) Wiring, Positioning, and Support Accessories
DoD Adopted |
| 288 | SAE AMS5716J-2010 | 2010-05-01 | English | Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, and Rings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat Treated - UNS N08330
DoD Adopted |
| 289 | SAE AMS2759/7B-2010 | 2010-05-01 | English | Carburizing and Heat Treatment of Carburizing Grade Steel Parts
DoD Adopted |
| 290 | SAE AMS6264K-2010 | 2010-05-01 | English | Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (SAE 9317) - UNS K44414
DoD Adopted |
| 291 | SAE J1939-31-2010 | 2010-05-01 | English | (R) Network Layer |
| 292 | SAE J1432-2010 | 2010-05-01 | English | (R) Rear High Mounted Stop Lamps and Rear High Mounted Turn Signal Lamps for Use on Vehicles 2032 mm or More in Overall Width |
| 293 | SAE AMS5652H-2010 | 2010-05-01 | English | Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Tubing, and Rings 25Cr - 20Ni - 2.0Si (SAE 30314) Solution Heat Treated - UNS S31400 |
| 294 | SAE AS5768/2A-2010 | 2010-05-01 | English | TOOL, STRIPPER, MANUALLY ACTUATED, SMALL GRIP, ELECTRICAL INSULATION, ROUND WIRE, SIZE 16 TO 30 |
| 295 | SAE AS5768/1A-2010 | 2010-05-01 | English | TOOL, STRIPPER, MANUALLY ACTUATED, ELECTRICAL INSULATION, ROUND WIRE, SIZE 10 TO 30 |
| 296 | SAE AMS6270P-2010 | 2010-05-01 | English | Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615) - UNS G86150
DoD Adopted |
| 297 | SAE AMS6272L-2010 | 2010-05-01 | English | Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617) - UNS G86170 |
| 298 | SAE AMS6292H-2010 | 2010-05-01 | English | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617) - UNS G46170
DoD Adopted |
| 299 | SAE AMS6294H-2010 | 2010-05-01 | English | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620) - UNS G46200
DoD Adopted |
| 300 | SAE AMS6428J-2010 | 2010-05-01 | English | Steel, Bars, Forgings, and Tubing 0.80Cr-1.8Ni-0.35Mo-0.20V(0.32-0.38C) (4335 Mod) - UNS K33517
DoD Adopted |
| 301 | SAE AMS6429G-2010 | 2010-05-01 | English | Steel Bars, Forgings, Tubing, and Rings 0.78Cr 鈥?1.8Ni 鈥?0.35Mo 鈥?0.20V (0.33 鈥?0.38C) (4335 Mod) Consumable Electrode Vacuum Melted - UNS K33517
DoD Adopted |
| 302 | SAE AMS6433F-2010 | 2010-05-01 | English | Steel, Sheet, Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) - UNS K33517
DoD Adopted |
| 303 | SAE ARP1178B-2010 | 2010-05-01 | English | (R) Aircraft Evacuation Signal System |
| 304 | SAE AMS3668D-2010 | 2010-05-01 | English | Polytetrafluoroethylene (PTFE) Moldings Premium Grade, As Sintered
DoD Adopted |
| 305 | SAE ARP743C-2010 | 2010-05-01 | English | Procedure for the Determination of Particulate Contamination of Air in Dust Controlled Spaces by the Manual Particle Count Method
DoD Adopted |
| 306 | SAE AIR5005A-2010 | 2010-05-01 | English | (R) Aerospace - Commercial Aircraft Hydraulic Systems |
| 307 | SAE AMS7270L-2010 | 2010-05-01 | English | Rings, Sealings, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant 65 - 75
DoD Adopted |
| 308 | SAE AMS7271J-2010 | 2010-05-01 | English | Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60 - 70
DoD Adopted |
| 309 | SAE AMS2759/2F-2010 | 2010-05-01 | English | Heat Treatment of Low-Alloy Steel Parts Minimum Tensile Strength 220 ksi (1517 MPa) and Higher |
| 310 | SAE AIR4566A-2010 | 2010-05-01 | English | Crashworthy Landing Gear Design |
| 311 | SAE J2612-2010 | 2010-05-01 | English | Internal Combustion Engines鈥擯iston Vocabulary |
| 312 | SAE AS5234-2010 | 2010-05-01 | English | NUT, COUPLING FLARELESS |
| 313 | SAE ARP5481A-2010 | 2010-05-01 | English | Recommended Wheel Tie Bolt Preload Procedure |
| 314 | SAE/TP 2010-01-0416-2010 | 2010-04-12 | English | Reconstruction of Noise Source in a Ducted Fan Using a Generalized Nearfield Acoustical Holography |
| 315 | SAE AMS4916K-2010 | 2010-04-01(R 2014) | English | Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed - UNS R54810 |
| 316 | SAE J1148-2010 | 2010-04-01 | English | Engine Charge Air Cooler (CAC) Nomenclature |
| 317 | SAE AS1005G-2010 | 2010-04-01 | English | FITTING, TEE, STANDARD AND REDUCER, FLARELESS
DoD Adopted |
| 318 | SAE AMS2410K-2010 | 2010-04-01 | English | Plating, Silver Nickel Strike, High Bake
DoD Adopted |
| 319 | SAE J647-2010 | 2010-04-01 | English | (R) Automatic Transmissions - Schematic Diagrams |
| 320 | SAE AMS4985D-2010 | 2010-04-01 | English | Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified - UNS R56401 |
| 321 | SAE AS1006F-2010 | 2010-04-01 | English | FITTING, CROSS, STANDARD AND REDUCER, FLARELESS
DoD Adopted |
| 322 | SAE AS611E-2010 | 2010-04-01 | English | (R) Hose Assembly and Tubing, Polytetrafluoroethylene, Cleaning Methods for
DoD Adopted |
| 323 | SAE AS1008G-2010 | 2010-04-01 | English | FITTING, ELBOW, 90 DEGREES, STANDARD AND REDUCER, BULKHEAD, FLARELESS
DoD Adopted |
| 324 | SAE AMS2424F-2010 | 2010-04-01 | English | Plating, Nickel Low-Stressed Deposit
DoD Adopted |
| 325 | SAE AS5402A-2010 | 2010-04-01 | English | (R) Design and Performance Criteria Aircraft Crash Axes |
| 326 | SAE AS35769A-2010 | 2010-04-01 | English | (R) GASKET, METALLIC, ENCASED, ANNULAR, COPPER
DoD Adopted |
| 327 | SAE AS1001G-2010 | 2010-04-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARELESS
DoD Adopted |
| 328 | SAE AS1002G-2010 | 2010-04-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD AND INTERNAL PORT ON RUN, FLARELESS
DoD Adopted |
| 329 | SAE AS1003F-2010 | 2010-04-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS
DoD Adopted |
| 330 | SAE AS35411C-2010 | 2010-04-01 | English | Fittings, Lubrication
DoD Adopted |
| 331 | SAE AS5756-A2-2010 | 2010-04-01 | English | Cable, Power, Electrical, Portable General Specification For
DoD Adopted |
| 332 | SAE AMS4991D-2010 | 2010-04-01 | English | Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional - UNS R56401 |
| 333 | SAE AMS4992A-2010 | 2010-04-01 | English | Castings, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically Pressed - UNS R56401 |
| 334 | SAE AMS5656E-2010 | 2010-04-01 | English | Steel, Corrosion Resistant, Bars, Wire, Forgings, Extrusions, and Rings 9.0Mn - 20Cr - 6.5Ni - 0.27N Solution Heat Treated - UNS S21904
DoD Adopted |
| 335 | SAE AS1004F-2010 | 2010-04-01 | English | FITTING, ELBOW, 90 DEGREES, STANDARD AND REDUCER, FLARELESS
DoD Adopted |
| 336 | SAE AMS4803E-2010 | 2010-04-01 | English | Zinc Alloy Castings, Die 4.0Al 鈥?0.04Mg (AG40A) As Cast - UNS Z33520 |
| 337 | SAE J2863-2010 | 2010-04-01 | English | Automotive Trailer Tow Connector |
| 338 | SAE J2828-2010 | 2010-04-01 | English | Off-Road Tire Fire Handling Guidelines |
| 339 | SAE J1355-2010 | 2010-04-01 | English | (R) Test Method for Measuring Thickness of Resilient Insulating Paddings |
| 340 | SAE AMS6490G-2010 | 2010-04-01 | English | Steel Bars, Forgings, and Tubing 4.0Cr 鈥?4.2Mo 鈥?1.0V (0.77 鈥?0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted - UNS T11350
DoD Adopted |
| 341 | SAE AIR38B-2010 | 2010-04-01 | English | (R) Guide For The Design Of Threaded Screw Or Stud Type Electrical Equipment Terminations |
| 342 | SAE AS85049/45A-A1-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Strain Relief, Straight, Non-metallic, Category 4C (For MIL-DTL-27599 Series I and MIL-DTL-38999 I and II Connectors)
DoD Adopted |
| 343 | SAE AS85049/42A-A1-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Backshell, Non-environmental, Strain Relief, Straight, Category 4A (For MIL-DTL-5015 Solder Type, V Thread of 310X, Classes A, B, C or K Connectors)
DoD Adopted |
| 344 | SAE AS85049/36A-A1-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Backshell, Environmental, Straight, Shield Termination, Category 3B (For MIL-DTL-27599 Series I and MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 345 | SAE J2848-1-2010 | 2010-04-01 | English | Tire Pressure Monitoring Systems鈥擣or Medium and Heavy Duty Highway Vehicles |
| 346 | SAE AS85049/33A-A3-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Backshell, Non-environmental, Straight, Shielded Termination, Category 7 (For MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 347 | SAE J2679-2010 | 2010-04-01 | English | Charge Air Cooler Leakage |
| 348 | SAE AMS4245E-2010 | 2010-04-01 | English | Aluminum Alloy, Welding Wire 5.0Si 鈥?1.2Cu 鈥?0.50Mg (C355.0) - UNS A03550
DoD Adopted |
| 349 | SAE AMS2477A-2010 | 2010-04-01 | English | Conversion Coating for Aluminum Alloys Low Electrical Resistance Coating |
| 350 | SAE J575-2010 | 2010-04-01 | English | Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width
DoD Adopted |
| 351 | SAE AMS2483C-2010 | 2010-04-01 | English | Blackening Solution for Aluminum Touch-Up Solution |
| 352 | SAE AMS4100E-2010 | 2010-04-01 | English | Aluminum Alloy, Alclad, Sheet 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (Alclad 7475-T761) Solution and Precipitation Heat Treated - UNS A87475
DoD Adopted |
| 353 | SAE AS1010F-2010 | 2010-04-01 | English | FITTING, ELBOW, 45 DEGREES, STANDARD AND REDUCER, BULKHEAD, FLARELESS
DoD Adopted |
| 354 | SAE AIR1494B-2010 | 2010-04-01 | English | Verification of Landing Gear Design Strength |
| 355 | SAE AS1034F-2010 | 2010-04-01 | English | FITTING, ELBOW, 90 DEGREES, STANDARD AND REDUCER, FLARED
DoD Adopted |
| 356 | SAE AMS6325J-2010 | 2010-04-01 | English | Steel, Bars and Forgings 0.50Cr 鈥?0.55Ni 鈥?0.25Mo (0.38 鈥?0.43C) (SAE 8740) Heat Treated, 105 ksi (724 MPa) Tensile Strength - UNS G87400
DoD Adopted |
| 357 | SAE AMS6423G-2010 | 2010-04-01 | English | Steel Bars, Forgings, and Tubing 0.92Cr - 0.75Ni - 0.52Mo - 0.003B - 0.04V (0.40 - 0.46C) (Modified 96BV40) - UNS K24336 |
| 358 | SAE AMS5786G-2010 | 2010-04-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe - UNS N10004
DoD Adopted |
| 359 | SAE AS8243A-2010 | 2010-04-01 | English | Anti-Icing and Deicing-Defrosting Fluids |
| 360 | SAE AS85049/46A-A1-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Strain Relief, 90 Degrees, Non-metallic, Category 4C (For MIL-DTL-27599 Series I and MIL-DTL-38999 I and II Connectors)
DoD Adopted |
| 361 | SAE J2836-1-2010 | 2010-04-01 | English | Use Cases for Communication Between Plug-in Vehicles and the Utility Grid |
| 362 | SAE J2556-2010 | 2010-04-01 | English | Radiated Emissions (RE) Narrowband Data Analysis - Power Spectral Density (PSD) |
| 363 | SAE AS9115-2010 | 2010-04-01 | English | Quality Management Systems 鈥?Requirements for Aviation, Space and Defense Organizations 鈥?Deliverable Software (Supplement to 9100) |
| 364 | SAE AS85049/58A-A1-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For MIL-DTL-38999 I and II Connectors)
DoD Adopted |
| 365 | SAE AS35769A-2010 | 2010-04-01 | English | (R) GASKET, METALLIC, ENCASED, ANNULAR, COPPER |
| 366 | SAE AMS2483C-2010 | 2010-04-01 | English | Blackening Solution for Aluminum Touch-Up Solution |
| 367 | SAE AS34501A-A1-2010 | 2010-04-01 | English | Connectors, Receptacle, Electrical, Wall Mounting, Rear Release, Crimp Contact, AN Type
DoD Adopted |
| 368 | SAE AMS2424F-2010 | 2010-04-01 | English | Plating, Nickel Low-Stressed Deposit |
| 369 | SAE AMS2483C-2010 | 2010-04-01 | English | Blackening Solution for Aluminum Touch-Up Solution |
| 370 | SAE AS5162B-2010 | 2010-04-01 | English | FITTING, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90 DEGREES
DoD Adopted |
| 371 | SAE AS33699A-2010 | 2010-04-01 | English | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 7
DoD Adopted |
| 372 | SAE AS85049/143-2010 | 2010-04-01 | English | CONNECTOR ACCESSORIES, BACKSHELL, STRAIN RELIEF, CATEGORY 4C, FOR AS81714, SIZE 22, 20 AND 16 TERMINAL JUNCTION BLOCKS |
| 373 | SAE AMS4916K-2010 | 2010-04-01 | English | Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed - UNS R54810 |
| 374 | SAE AS5402A-2010 | 2010-04-01 | English | (R) Design and Performance Criteria Aircraft Crash Axes |
| 375 | SAE AMS4918M-2010 | 2010-04-01 | English | Titanium Alloy, Sheet, Strip, and Plate 6AI - 6V - 2Sn Annealed - UNS R56620 |
| 376 | SAE AS85049/61A-A1-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Ring, Potting Boot, Category 5 (For MIL-DTL-27599 Connectors)
DoD Adopted |
| 377 | SAE AMS4919G-2010 | 2010-04-01 | English | Titanium Alloy Sheet, Strip, and Plate 6AI - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed - UNS R54620 |
| 378 | SAE AS1009G-2010 | 2010-04-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS
DoD Adopted |
| 379 | SAE AMS6423F-2010 | 2010-04-01 | English | Steel Bars, Forgings, and Tubing 0.92Cr - 0.75Ni - 0.52Mo - 0.003B - 0.04V (0.40 - 0.46C) (Modified 96BV40) - UNS K24336 |
| 380 | SAE AMS5762F-2010 | 2010-04-01 | English | Steel, Corrosion Resistant, Bars, Wire, and Forgings 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S Free Machining, Solution Heat Treated - UNS S20300 |
| 381 | SAE J2040-2010 | 2010-04-01 | English | Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width |
| 382 | SAE J2040-2010 | 2010-04-01 | English | Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width |
| 383 | SAE J2848-1-2010 | 2010-04-01 | English | Tire Pressure Monitoring Systems - for Medium and Heavy Duty Highway Vehicles |
| 384 | SAE AS5402A-2010 | 2010-04-01 | English | (R) Design and Performance Criteria Aircraft Crash Axes |
| 385 | SAE AS85049/59-A3-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-22992 Connectors, Classes C, J and R)
DoD Adopted |
| 386 | SAE AIR38B-2010 | 2010-04-01 | English | (R) Guide for the Design of Threaded Screw or Stud Type Electrical Equipment Terminations |
| 387 | SAE AS85049/62-A1-2010 | 2010-04-01 | English | Connector Accessories, Electrical, Adapter, Shrink Boot, Category 5 (For MIL-DTL-38999 Series I and II Connectors)
DoD Adopted |
| 388 | SAE AS33701A-2010 | 2010-04-01 | English | Insert Arrangements, Electric Connector, Shell Size 19
DoD Adopted |
| 389 | SAE AS33702A-2010 | 2010-04-01 | English | INSERT ARRANGEMENTS, ELECTRIC CONNECTOR, SHELL SIZE 27
DoD Adopted |
| 390 | SAE AMS5621F-2010 | 2010-04-01 | English | Steel, Corrosion Resistant, Bars, Wire, and Forgings 13Cr (0.30-0.40C) (SAE 51420) Annealed - UNS S42000 |
| 391 | SAE ARP5879-2010 | 2010-04-01 | English | Aerospace 鈥?Test Methodology for Electrohydrostatic Actuators |
| 392 | SAE ARP488E-2010 | 2010-04-01 | English | (R) Exits and Their Operation 鈥?Air Transport Cabin Emergency |
| 393 | SAE AS6009 ASCII-2010 | 2010-03-18 | English | JAUS Mobility Service Set with ASCII files - See Also SAE AS6009; Includes Access to Additional Content |
| 394 | SAE AS5710 ASCII-2010 | 2010-03-18 | English | JAUS Core Service Set with ASCII Files - See Also SAE AS5710; Includes Access to Additional Content |
| 395 | SAE AS5684 ASCII-2010 | 2010-03-18 | English | JAUS Service Interface Definition Language with ASCII files - See Also SAE AS5684; Includes Access to Additional Content |
| 396 | SAE AS1393-2010 | 2010-03-01(R 2014) | English | Serial Hi-Rel Ring Network for Aerospace Applications (RingNet) |
| 397 | SAE AS7225A-2010 | 2010-03-01 | English | Rivets, Carbon Steel Procurement Specification for
DoD Adopted |
| 398 | SAE J2344-2010 | 2010-03-01 | English | (R) Guidelines for Electric Vehicle Safety |
| 399 | SAE AS15001C-2010 | 2010-03-01 | English | FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, STEEL, TYPE I
DoD Adopted |
| 400 | SAE AS15004C-2010 | 2010-03-01 | English | FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, NICKEL-COPPER ALLOY, TYPE IV
DoD Adopted |
| 401 | SAE AS15005C-2010 | 2010-03-01 | English | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, NICKEL-COPPER ALLOY, TYPE V
DoD Adopted |
| 402 | SAE J941-2010 | 2010-03-01 | English | Motor Vehicle Drivers鈥?Eye Locations |
| 403 | SAE AS85049/5A-A1-2010 | 2010-03-01 | English | Connector Accessories, Electrical, Backshell, Cable Sealing, Straight, Step-Down, Category 1A (For MIL-DTL-22992 Classes C, J and R)
DoD Adopted |
| 404 | SAE AS85049/17A-A1-2010 | 2010-03-01 | English | Connector Accessories, Electrical, Backshell, Environmental, Straight, Shield Termination, Category 2B (For MIL-DTL-38999 I and II Connectors)
DoD Adopted |
| 405 | SAE J2284-3-2010 | 2010-03-01 | English | High-Speed CAN (HSC) for Vehicle Applications at 500 KBPS |
| 406 | SAE ARP5376B-2010 | 2010-03-01 | English | Methods, Locations And Criteria For System Sampling And Measuring The Solid Particle Contamination Of Hydraulic Fluids |
| 407 | SAE ARP5403A-2010 | 2010-03-01 | English | (R) Aircraft Crash Axes |
| 408 | SAE AS15720C-2010 | 2010-03-01 | English | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, .250-28 TAPER THREADS, CORROSION RESISTANT STEEL, TYPE VII
DoD Adopted |
| 409 | SAE AS15721C-2010 | 2010-03-01 | English | FITTING, LUBRICATION, HYDRAULIC, THROAT OR SURFACE CHECK, 1/8 PIPE THREADS, CORROSION RESISTANT STEEL, TYPE VIII
DoD Adopted |
| 410 | SAE EIA-836B-2010 | 2010-03-01 | English | Configuration Management Data Exchange and Interoperability - Formerly TechAmerica EIA-836B; Includes Access to Additional Content |
| 411 | SAE AIR5416-2010 | 2010-03-01 | English | Maintenance Life Cycle Cost Model |
| 412 | SAE AIR5416-2010 | 2010-03-01 | English | Maintenance Life Cycle Cost Model |
| 413 | SAE J2281-2010 | 2010-03-01 | English | Selecting and Specifying Hot-Rolled Steel Bar Products |
| 414 | SAE ARP5403A-2010 | 2010-03-01 | English | (R) Aircraft Crash Axes |
| 415 | SAE AS1035F-2010 | 2010-03-01 | English | FITTING, TEE, STANDARD AND REDUCER, FLARED
DoD Adopted |
| 416 | SAE J551-11-2010 | 2010-03-01 | English | Vehicle Electromagnetic Immunity - Off-Vehicle Source |
| 417 | SAE J2658-2010 | 2010-03-01 | English | (R) Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use鈥擳est Methods for Hydraulic Fluid Power Metallic Tube Assemblies |
| 418 | SAE AIR6037-2010 | 2010-03-01 | English | Aircraft Exhaust Nonvolatile Particle Matter Measurement Method Development |
| 419 | SAE AS1037G-2010 | 2010-03-01 | English | FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARED
DoD Adopted |
| 420 | SAE AS1031F-2010 | 2010-03-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL PORT ON SIDE, FLARED
DoD Adopted |
| 421 | SAE AS1033F-2010 | 2010-03-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARED
DoD Adopted |
| 422 | SAE AS153201 THRU AS153500A-2010 | 2010-03-01 | English | (R) STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A
DoD Adopted |
| 423 | SAE AS1036H-2010 | 2010-03-01 | English | FITTING, CROSS, STANDARD AND REDUCER, FLARED
DoD Adopted |
| 424 | SAE AS3589B-2010 | 2010-03-01 | English | PIN AND PLUG, EXPANSION SET OF PARTS, AL ALLOY 2024-T4 AND 2024-T351, LONG; STD AND .010 OVERSIZE DIAMETERS (UNS A92024)
DoD Adopted |
| 425 | SAE J156-2010 | 2010-03-01 | English | Fusible Links |
| 426 | SAE AS1039F-2010 | 2010-03-01 | English | FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARED
DoD Adopted |
| 427 | SAE AS1038F-2010 | 2010-03-01 | English | FITTING, ELBOW, 90 DEGREES, STANDARD AND REDUCER, BULKHEAD, FLARED
DoD Adopted |
| 428 | SAE AS85049/96B-2010 | 2010-03-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, MOUNTING DEVICE, FLANGE TYPE, CATEGORY 7, 1/4 PERIMETER
DoD Adopted |
| 429 | SAE AS9101DW-2010 | 2010-03-01 | English | Quality Management Systems Audit Requirements for Aviation, Space, and Defense Organizations - Includes Access to Additional Content |
| 430 | SAE ARP5403A-2010 | 2010-03-01 | English | (R) Aircraft Crash Axes |
| 431 | SAE J1926-2-2010 | 2010-03-01 | English | (R) Connections for General Use and Fluid Power鈥擯orts and Stud Ends with ASME B1.1 Threads and O-Ring Sealing鈥擯art 2: Heavy-Duty (S Series) Stud Ends
DoD Adopted |
| 432 | SAE J1127-2010 | 2010-03-01 | English | Low Voltage Battery Cable
DoD Adopted |
| 433 | SAE J1742-2010 | 2010-03-01 | English | Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements |
| 434 | SAE J1139-2010 | 2010-03-01 | English | Direction-of-Motion Stereotypes for Automotive Hand Controls |
| 435 | SAE J2344-2010 | 2010-03-01 | English | (R) Guidelines for Electric Vehicle Safety |
| 436 | SAE J1263-2010 | 2010-03-01 | English | Road Load Measurement and Dynamometer Simulation Using Coastdown Techniques |
| 437 | SAE AS1393-2010 | 2010-03-01 | English | Serial Hi-Rel Ring Network for Aerospace Applications (RingNet) |
| 438 | SAE J2601-2010 | 2010-03-01 | English | Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles |
| 439 | SAE AS9101D-2010 | 2010-03-01 | English | Quality Management Systems Audit Requirements for Aviation, Space, and Defense Organizations |
| 440 | SAE AS85049/90A-A1-2010 | 2010-03-01 | English | Connector Accessories, Electrical, Backshell, 90 Degrees, Self-Locking, Shield Band Termination, (RFI/EMI), Shrink Sleeve Accommodation, Category 3B (For MIL-DTL-38999 Series III And IV Connectors)
DoD Adopted |
| 441 | SAE J1926-3-2010 | 2010-03-01 | English | (R) Connections for General Use and Fluid Power鈥擯orts and Stud Ends with ASME B1.1 Threads and O-Ring Sealing鈥擯art 3: Light-Duty (L-Series) Stud Ends
DoD Adopted |
| 442 | SAE J1609-2010 | 2010-02-01(R 2014) | English | Air Reservoir Capacity Performance Guide-Trucks and Buses |
| 443 | SAE AS22759/180-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, TIN-COATED COPPER CONDUCTOR, 150 Degree C, 600 VOLTS |
| 444 | SAE AMS5588G-2010 | 2010-02-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated - UNS N06002
DoD Adopted |
| 445 | SAE AS22759/182-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKELCOATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREE C, 600 VOLTS |
| 446 | SAE J565-2010 | 2010-02-01 | English | (R) Semiautomatic Headlamp Beam Switching Devices
DoD Adopted |
| 447 | SAE AS22759/192-2010 | 2010-02-01 | English | POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 260 DEGREE C, 600 VOLTS |
| 448 | SAE J1868-2010 | 2010-02-01 | English | Restricted Hardenability Bands for Selected Alloy Steels |
| 449 | SAE AMS2481J-2010 | 2010-02-01 | English | Phosphate Treatment Antichafing
DoD Adopted |
| 450 | SAE J576-2010 | 2010-02-01 | English | Plastic Material or Materials for Use in Optical Parts Such as Lenses and Reflex Reflectors of Motor Vehicle Lighting Devices
DoD Adopted |
| 451 | SAE J2839-2010 | 2010-02-01 | English | Heavy Duty High Speed Datalink Connector |
| 452 | SAE J1609-2010 | 2010-02-01 | English | Air Reservoir Capacity Performance Guide鈥擳rucks and Buses |
| 453 | SAE AIR5303-2010 | 2010-02-01 | English | Infrasound Phenomenon in Engine Test Cells |
| 454 | SAE AIR5661-2010 | 2010-02-01 | English | Compartment Decompression Analysis |
| 455 | SAE AMS4901R-2010 | 2010-02-01 | English | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa) - UNS R50700 |
| 456 | SAE AS22759/183-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 Degree C, 600 VOLTS |
| 457 | SAE J2790-2010 | 2010-02-01 | English | (R) Test Method for Evaluating the Electrical Resistance of Coolant System Hose Covers |
| 458 | SAE AS22759/191-2010 | 2010-02-01 | English | POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER-COATED COPPER CONDUCTOR, 200 DEGREE C, 600 VOLTS |
| 459 | SAE AS22759/185-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TINCOATED COPPER CONDUCTOR, 150 Degree C, 600 VOLTS |
| 460 | SAE AS22759/184-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL-COATED COPPER CONDUCTOR, 260 Degree C, 600 VOLTS |
| 461 | SAE AS22759/181-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVERCOATED HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 DEGREE C, 600 VOLTS |
| 462 | SAE AMS5581F-2010 | 2010-02-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) Annealed - UNS N06625
DoD Adopted |
| 463 | SAE AMS-H-81200C-2010 | 2010-02-01 | English | Heat Treatment of Titanium and Titanium Alloys
DoD Adopted |
| 464 | SAE AS22759/186-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVERCOATED COPPER CONDUCTOR, 200 Degree C, 600 VOLTS |
| 465 | SAE AS22759/187-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKELCOATED COPPER CONDUCTOR, 260 Degree C, 600 VOLTS |
| 466 | SAE AS22759/188-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TINCOATED COPPER CONDUCTOR, 150 Degeree C, 600 VOLTS |
| 467 | SAE AS22759/189-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVERCOATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 Degree C, 600 VOLTS |
| 468 | SAE AS22759/190-2010 | 2010-02-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKELCOATED HIGH STRNGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 DEGREE C, 600 VOLTS |
| 469 | SAE J1609-2010 | 2010-02-01 | English | Air Reservoir Capacity Performance Guide - Trucks and Buses |
| 470 | SAE USCAR-15-2010 | 2010-02-01 | English | SPECIFICATION FOR TESTING AUTOMOTIVE LIGHT BULB SOCKETS - REVISION 3 |
| 471 | SAE J1926-1-2010 | 2010-02-01 | English | Connections for General Use and Fluid Power鈥擯orts and Stud Ends with ASME B1.1 Threads and O-Ring Sealing鈥擯art 1: Threaded Port with O-Ring Seal in Truncated Housing
DoD Adopted |
| 472 | SAE J1727-2010 | 2010-02-01 | English | (R) Calculation Guidelines for Impact Testing |
| 473 | SAE AMS5356C-2010 | 2010-02-01 | English | Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength - UNS J92110
DoD Adopted |
| 474 | SAE AMS3248C-2010 | 2010-02-01 | English | (R) Ethylene Propylene (EPM) Rubber Phosphate Ester Resistant 55 - 65
DoD Adopted |
| 475 | SAE AMS5832G-2010 | 2010-02-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted - UNS N07718
DoD Adopted |
| 476 | SAE J1939-71-2010 | 2010-02-01 | English | Vehicle Application Layer (Through February 2009) |
| 477 | SAE J1939-73-2010 | 2010-02-01 | English | Application Layer - Diagnostics
DoD Adopted |
| 478 | SAE J594-2010 | 2010-02-01 | English | Reflex Reflectors
DoD Adopted |
| 479 | SAE J1939-2010 | 2010-02-01 | English | Recommended Practice for a Serial Control and Communications Vehicle Network - See SAE CS 1939 for Companion Spreadsheet |
| 480 | SAE AS5716-2010 | 2010-02-01 | English | Standard Electrical and Logical Interface for Airborne Fuzing Systems |
| 481 | SAE J2461-2010 | 2010-02-01 | English | Vehicle Electronic Programming Stations (VEPS) System Specification for Win32 |
| 482 | SAE J2422-2010 | 2010-02-01 | English | Cab Roof Strength Evaluation鈥擰uasi-Static Loading Heavy Trucks |
| 483 | SAE AS4373D-2010 | 2010-02-01 | English | Test Methods for Insulated Electric Wire |
| 484 | SAE AIR5303-2010 | 2010-02-01 | English | Infrasound Phenomenon in Engine Test Cells |
| 485 | SAE J1726-2010 | 2010-02-01 | English | (R) Charge Air Cooler Internal Cleanliness, Leakage, and Nomenclature |
| 486 | SAE J2133-2010 | 2010-02-01 | English | Disc Wheel Radial Runout Low Point Marking |
| 487 | SAE AS5870-2010 | 2010-01-26(R 2014) | English | Thread Inspection Practices |
| 488 | SAE AIR6553-2010 | 2010-01-26(R 2014) | English | Measurement Uncertainty and Consumer Risk |
| 489 | SAE AS5870-2010 | 2010-01-26 | English | Thread Inspection Practices |
| 490 | SAE AS5870-2010 | 2010-01-26 | English | Thread Inspection Practices |
| 491 | SAE AIR6553-2010 | 2010-01-26 | English | Measurement Uncertainty and Consumer Risk |
| 492 | SAE AMS4313D-2010 | 2010-01-01 | English | Aluminum Alloy, Rolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219-T352) Solution Heat Treated and Mechanically Stress Relieved - UNS A92219
DoD Adopted |
| 493 | SAE AMS2482D-2010 | 2010-01-01 | English | Hard Anodic Coating on Aluminum Alloys Polytetrafluoroethylene (PTFE)-Impregnated or Codeposited |
| 494 | SAE J2402-2010 | 2010-01-01 | English | (R) Road Vehicles鈥擲ymbols for Controls, Indicators, and Tell-tales |
| 495 | SAE J2716-2010 | 2010-01-01 | English | (R) SENT鈥擲ingle Edge Nibble Transmission for Automotive Applications |
| 496 | SAE AMS5587F-2010 | 2010-01-01 | English | Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated - UNS N06002
DoD Adopted |
| 497 | SAE AS1040F-2010 | 2010-01-01 | English | FITTING, ELBOW, 45 DEGREES, STANDARD AND REDUCER, BULKHEAD, FLARED
DoD Adopted |
| 498 | SAE J2904-2010 | 2010-01-01 | English | Power Cylinder Friction: Mechanisms |
| 499 | SAE J2191-2010 | 2010-01-01 | English | Recommended Practice for Identification of Standardized Truck and Tractor Electrical Circuits |
| 500 | SAE J4002-2010 | 2010-01-01 | English | H-Point Machine (HPM-II) Specifications and Procedure for H-Point Determination鈥擜uditing Vehicle Seats |
|