| Pos | standard Number | publication date | Language | Description |
| 1 | SAE AS85049/126B-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90° SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 2 | SAE J581-2011 | 2011-02-01 | English | Auxiliary High Beam Lamps - This document has been declared "Stabilized" by SAE |
| 3 | SAE J591-2011 | 2011-02-01 | English | Spot Lamps - This document has been declared "Stabilized" by SAE |
| 4 | SAE J600-2011 | 2011-02-01 | English | Headlamp Aim Test Machines - This document has been declared "Stabilized" by SAE |
| 5 | SAE J602-2011 | 2011-02-01 | English | Headlamp Aiming Device for Mechanically Aimable Headlamp Units - This document has been declared "Stabilized" by SAE |
| 6 | SAE J1409-2011 | 2011-02-01 | English | Air Brake Valves Test Procedure |
| 7 | SAE J1410-2011 | 2011-02-01 | English | Air Brake Valve - Performance Requirements |
| 8 | SAE J2302-2011 | 2011-02-01 | English | Thermal Effectiveness of Sleeve Insulation - This document has been declared "Stabilized" by SAE |
| 9 | SAE J2314-2011 | 2011-02-01 | English | Ethics for Accident Investigation and Reconstruction - This document has been declared "Stabilized" by SAE |
| 10 | SAE J2338-2011 | 2011-02-01 | English | Recommendations of the SAE Task Force on Headlamp Mounting Height - This document has been declared "Stabilized" by SAE |
| 11 | SAE J2403-2011 | 2011-02-01 | English | (R) Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature |
| 12 | SAE J2495-2011 | 2011-02-01 | English | Thermal Containment Efficiency of Sleeve Materials - This document has been declared "Stabilized" by SAE |
| 13 | SAE J2584-2011 | 2011-02-01 | English | Headlamp Mounting Height for Passenger and Pickup Truck Vehicles - This document has been declared "Stabilized" by SAE |
| 14 | SAE J2622-2011 | 2011-02-01 | English | Battery Connections for 42 Volt Electrical Systems Tests and General Performance Requirements - This document has been declared "Stabilized" by SAE |
| 15 | SAE J2651-2011 | 2011-02-01 | English | Jump Start Connections for 42 Volt Electrical Systems - This document has been declared "Stabilized" by SAE |
| 16 | SAE J2670-2011 | 2011-02-01 | English | Stability and Compatibility Criteria for Additives and Flushing Materials Intended for Aftermarket Use in R-134a (HFC-134a) and R-1234yf (HFO-1234yf) Vehicle Air-Conditioning Systems |
| 17 | SAE J2739-2011 | 2011-02-01 | English | Absorptive and Interference Coatings Applied on Replaceable Headlamp Bulbs - This document has been declared "Stabilized" by SAE |
| 18 | SAE J2762-2011 | 2011-02-01 | English | Method for Removal of Refrigerant from Mobile Air Conditioning System to Quantify Charge Amount |
| 19 | SAE J2772-2011 | 2011-02-01 | English | Measurement of Passenger Compartment Refrigerant Concentrations Under System Refrigerant Leakage Conditions |
| 20 | SAE J2773-2011 | 2011-02-01 | English | Standard for Refrigerant Risk Analysis for Mobile Air Conditioning Systems |
| 21 | SAE J2793-2011 | 2011-02-01 | English | Fuel Dispensing Filter Test Methods |
| 22 | SAE J2829-2011 | 2011-02-01 | English | Pedestrian Visibility - Low Beam Optimization to Reduce Night-time Fatalities - This document has been declared "Stabilized" by SAE |
| 23 | SAE J2842-2011 | 2011-02-01 | English | R-1234yf and R744 Design Criteria and Certification for OEM Mobile Air Conditioning Evaporator and Service Replacements |
| 24 | SAE J2843-2011 | 2011-02-01 | English | R-1234yf [HFO-1234yf] Recovery/Recycling/Recharging Equipment for Flammable Refrigerants for Mobile Air-Conditioning Systems |
| 25 | SAE AMS4532G-2011 | 2011-02-01 | English | Copper-Beryllium Alloy, Sheet and Strip 98Cu - 1.9Be Half Hard (TD02) - UNS C17200 |
| 26 | SAE AS85049/18B-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 2B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 27 | SAE AMS3267/3B-2011 | 2011-02-01 | English | Sealing Compound, Low Adhesion, Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa鈰卻), 2 Hour Application Time (A-2) |
| 28 | SAE AMS3374/1A-2011 | 2011-02-01 | English | Sealing Compound, One-Part Silicone (Type 1) Aircraft Firewall |
| 29 | SAE AMS3374/2A-2011 | 2011-02-01 | English | Sealing Compound Two-Part, Addition Cured Silicone (Type 2) Firewall Sealant |
| 30 | SAE AMS3374/3A-2011 | 2011-02-01 | English | Sealing Compound Two-Part, Condensation Cured (Type 3) Firewall Sealant |
| 31 | SAE AMS3374/4A-2011 | 2011-02-01 | English | Sealing Compound Two-Part, Polysulfide (Type 4) Firewall Sealant |
| 32 | SAE J2099-2011 | 2011-02-01 | English | Standard of Purity for Recycled R-134a (HFC-134a) and R-1234yf (HFO-1234yf) for Use in Mobile Air-conditioning Systems |
| 33 | SAE AS4410A-2011 | 2011-02-01 | English | (R) FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN, TO FLARED TUBE
DoD Adopted |
| 34 | SAE AMS4945D-2011 | 2011-02-01 | English | Titanium Alloy Tubing, Seamless, Hydraulic 3Al - 2.5V, Controlled Contractile Strain Ratio Cold Worked, Stress Relieved - UNS R56320 |
| 35 | SAE AS85049/19B-2011 | 2011-02-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, RFI/EMI, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 36 | SAE AS20708A-2011 | 2011-02-01 | English | (R) Synchros, General Specification For
DoD Adopted |
| 37 | SAE AS9552C-2011 | 2011-02-01 | English | (R) BRACKET, FLAT, CRES UNS S32100
DoD Adopted |
| 38 | SAE AMS-S-29574A-2011 | 2011-02-01 | English | Sealing Compound, Polythioether, for Aircraft Structures, Fuel and High Temperature Resistant, Fast Curing At Ambient and Low Temperatures |
| 39 | SAE AS7469A-2011 | 2011-02-01 | English | Bolts and Screws, UNS N07041 Nickel Alloy, Corrosion and Heat Resistant, 155 ksi, Procurement Specification
DoD Adopted |
| 40 | SAE AS85485A-2011 | 2011-02-01 | English | (R) Cable, Electric, Filter Line, Radio Frequency Absorptive
DoD Adopted |
| 41 | SAE AS20708/39A-2011 | 2011-02-01 | English | (R) Synchro, Control Transformer, Type 19CTB4b |
| 42 | SAE AS150401 THRU AS150425A-2011 | 2011-02-01 | English | (R) NUT-HEX, CHECK, UNS G87400
DoD Adopted |
| 43 | SAE AS4411A-2011 | 2011-02-01 | English | (R) FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON SIDE TO FLARED TUBE
DoD Adopted |
| 44 | SAE AS85049/21B-2011 | 2011-02-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 45 | SAE J163-2011 | 2011-02-01 | English | Low Tension Wiring and Cable Terminals and Splice Clips - This document has been declared "Stabilized" by SAE
DoD Adopted |
| 46 | SAE J1460-2-2011 | 2011-02-01 | English | Human Mechanical Impact Response Characteristics - Response of the Human Neck to Inertial Loading by the Head for Automotive Seated Postures - This document has been declared "Stabilized" by SAE |
| 47 | SAE J2223-2-2011 | 2011-02-01 | English | Connections for On-Board Road Vehicle Electrical Wiring Harnesses-Part 2: Tests and General Performance Requirements |
| 48 | SAE J1606-2011 | 2011-02-01 | English | Headlamp Design Guidelines for Mature Drivers - This document has been declared "Stabilized" by SAE |
| 49 | SAE J2913-2011 | 2011-02-01 | English | R-1234yf [HFO-1234yf] Refrigerant Electronic Leak Detectors, Minimum Performance Criteria |
| 50 | SAE J2927-2011 | 2011-02-01 | English | R-1234yf Refrigerant Identifier Installed In Recovery and Recycling Equipment for Use With Mobile A/C Systems |
| 51 | SAE J2929-2011 | 2011-02-01 | English | Electric and Hybrid Vehicle Propulsion Battery System Safety Standard - Lithium-based Rechargeable Cells |
| 52 | SAE AMS2418H-2011 | 2011-02-01 | English | Plating, Copper
DoD Adopted |
| 53 | SAE J3001-2011 | 2011-02-01 | English | Brake Insulator Damping Measurement Procedure |
| 54 | SAE J2912-2011 | 2011-02-01 | English | Performance Requirements for R-134a and R-1234yf Refrigerant Diagnostic Identifiers for Use with Mobile Air Conditioning Systems |
| 55 | SAE J2911-2011 | 2011-02-01 | English | Procedure for Certification that Requirements for Mobile Air Conditioning System Components, Service Equipment, and Service Technician Training Meet SAE J Standards |
| 56 | SAE J2888-2011 | 2011-02-01 | English | HFO-1234yf Service Hose, Fittings and Couplers for Mobile Refrigerant Systems Service Equipment |
| 57 | SAE J2851-2011 | 2011-02-01 | English | R-1234yf [HFO-1234yf] Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems |
| 58 | SAE J2845-2011 | 2011-02-01 | English | R-1234yf [HFO-1234yf] and R-744 Technician Training for Service and Containment of Refrigerants Used in Mobile A/C Systems |
| 59 | SAE J2844-2011 | 2011-02-01 | English | R-1234yf (HFO-1234yf) New Refrigerant Purity and Container Requirements For Use in Mobile Air-Conditioning Systems |
| 60 | SAE AMS4229E-2011 | 2011-02-01 | English | Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged - UNS A02010
DoD Adopted |
| 61 | SAE AS85049/26B-2011 | 2011-02-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NON-ENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 62 | SAE AS85049/25A-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 63 | SAE AS85049/24A-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 64 | SAE AS85049/23A-2011 | 2011-02-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 3A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 65 | SAE R-395-2011 | 2011-01-10 | English | Principles of Vibration Analysis With Applications in Automotive Engineering - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 66 | SAE AS5506/2-2011 | 2011-01-01(R 2019) | English | SAE Architecture Analysis and Design Language (AADL) Annex Volume 2: Annex B: Data Model Annex Annex D: Behavior Model Annex Annex F: ARINC653 |
| 67 | SAE AS39029/85A-2011 | 2011-01-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS)
DoD Adopted |
| 68 | SAE AS39029/86A-2011 | 2011-01-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS)
DoD Adopted |
| 69 | SAE AS85049/105B-2011 | 2011-01-01 | English | (R) CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 90°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 70 | SAE AS85049/104B-2011 | 2011-01-01 | English | (R) CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, 45°, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 71 | SAE AS81914/3-2011 | 2011-01-01 | English | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, HELICAL FLUORINATED ETHYLENE PROPYLENE (FEP), STANDARD CONVOLUTION
DoD Adopted |
| 72 | SAE AS81914/4-2011 | 2011-01-01 | English | TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, FLUORINATED ETHYLENE PROPYLENE (FEP), CLOSE CONVOLUTION
DoD Adopted |
| 73 | SAE AS81914/5-2011 | 2011-01-01 | English | TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, ETHYLENE TETRAFLUOROETHYLENE (ETFE), CLOSE CONVOLUTION
DoD Adopted |
| 74 | SAE AS81914/6-2011 | 2011-01-01 | English | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, HELICAL ETHYLENE TETRAFLUOROETHYLENE (ETFE), STANDARD CONVOLUTION
DoD Adopted |
| 75 | SAE AS81914/7-2011 | 2011-01-01 | English | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED WITH INTEGRAL BRAID (S)
DoD Adopted |
| 76 | SAE AS5958D-2011 | 2011-01-01 | English | (R) Fittings, Axially Swaged Tube with Flareless Separable, Fluid System For Operating Pressures up to and including 5080 psi (35 000 kPa), Specification for |
| 77 | SAE AS6029-2011 | 2011-01-01 | English | Performance Criteria for Laser Control Measures Used for Aviation Safety |
| 78 | SAE AS81914/10-2011 | 2011-01-01 | English | TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, PERFLUOROALKOXY (PFA), CLOSE CONVOLUTION
DoD Adopted |
| 79 | SAE AS85049/103B-2011 | 2011-01-01 | English | (R) CONNECTORS, ACCESSORIES, COMPOSITE, RFI/EMI, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING, CATEGORY 3C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 80 | SAE AS85049/14B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, NON-SELF-LOCKING AND SELF-LOCKING, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 81 | SAE AS85049/10B-2011 | 2011-01-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, STRAIGHT, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adop |
| 82 | SAE AS85049/6B-2011 | 2011-01-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45°, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 83 | SAE AS85049/7B-2011 | 2011-01-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 45°, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 84 | SAE AS85049/8B-2011 | 2011-01-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90°, SHIELD TERMINATION, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 85 | SAE AS85049/9B-2011 | 2011-01-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90°, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) |
| 86 | SAE AIR1871C-2011 | 2011-01-01 | English | (R) Lessons Learned from Developing, Implementing, and Operating a Health Management System for Propulsion and Drive Train Systems |
| 87 | SAE AUTO HDBK-2011 | 2011-01-01 | English | Automotive Handbook, by Bosch - 8th Edition; To Purchase: Contact IHS at 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 88 | SAE AS85049/60B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, ADAPTER, SHRINK BOOT, CATEGORY 5 (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 89 | SAE AS666D-2011 | 2011-01-01 | English | Cavity Design and O-ring Selection for Static Seal Use in Aircraft Tubeless Tire Wheels |
| 90 | SAE AS81914/2-2011 | 2011-01-01 | English | TUBING, PLASTIC, EXTRA FLEXIBLE, CONVOLUTED HELICAL, POLYTETRAFLUOROETHYLENE (PTFE) CLOSE CONVOLUTIONS |
| 91 | SAE AS81914-2011 | 2011-01-01 | English | Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification for |
| 92 | SAE AS85049/130B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL GASKETING MATERIAL, CONDUCTIVE/NON-CONDUCTIVE, FLANGE MOUNT, CATEGORY 7
DoD Adopted |
| 93 | SAE AMS4675D-2011 | 2011-01-01 | English | Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu - UNS N04400 |
| 94 | SAE AS85049/124B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, AND NON-SELF-LOCKING CATEGORY 4C (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 95 | SAE AS85049/121B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, AND NON-SELF-LOCKING, CATEGORY 4C (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 96 | SAE AS85049/140A-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BOOTS, HEAT-SHRINKABLE, STRAIGHT, CATEGORY 7
DoD Adopted |
| 97 | SAE AS85049/118B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT SELF-LOCKING, NON-SELF-LOCKING, CATEGORY 4B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL DTL-83723 SERIES III CONNECTORS)
DoD Adopted |
| 98 | SAE J1128-2011 | 2011-01-01 | English | Low Voltage Primary Cable
DoD Adopted |
| 99 | SAE AS85049/141A-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BOOTS, HEAT-SHRINKABLE, 90 DEGREES, CATEGORY 7
DoD Adopted |
| 100 | SAE AS85049/142A-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL BOOTS AND SLEEVES, TRANSITIONS, HEAT-SHRINKABLE, CATEGORY 7 |
| 101 | SAE J2087-2011 | 2011-01-01 | English | (R) Daytime Running Light |
| 102 | SAE AMS4394-2011 | 2011-01-01 | English | Magnesium Alloy Welding Wire 2.5Ag - 2.1Di - 0.70Zr (QE22A) - UNS M18220 |
| 103 | SAE AIR5938-2011 | 2011-01-01 | English | Information on Hard Landings |
| 104 | SAE CS1939-2011 | 2011-01-01 | English | Companion Spreadsheet (J1939) - See Also SAE J1939; Includes Access to Additional Content |
| 105 | SAE AS85049/20B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, RFI/EMI CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) |
| 106 | SAE AS81714/23A-2011 | 2011-01-01 | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTIONS, INTEGRAL FUSE, SERIES I |
| 107 | SAE AS39029B-2011 | 2011-01-01 | English | Contacts, Electrical Connector, General Specification For
DoD Adopted |
| 108 | SAE AS6030-2011 | 2011-01-01 | English | Interface Standard, Common Interface Control Plan |
| 109 | SAE AS39029/86A-2011 | 2011-01-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR AS50151 AS34501 SERIES AND MIL-DTL-83723 SERIES II CONNECTORS |
| 110 | SAE AS39029/78A-2011 | 2011-01-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES II CONNECTORS)
DoD Adopted |
| 111 | SAE AS3413A-2011 | 2011-01-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT) |
| 112 | SAE J2629-2011 | 2011-01-01 | English | Standard Formats for Presenting Acoustical Data |
| 113 | SAE AS85049/87B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90掳, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 114 | SAE AS81914/11-2011 | 2011-01-01 | English | TUBING, PLASTIC, LIGHTWEIGHT, ZERO HALOGEN, EXTRA FLEXIBLE, CONVOLUTED, HELICAL, CLOSE CONVOLUTION, POLYETHERETHERKEYTONE (PEEK) |
| 115 | SAE AS81914/9-2011 | 2011-01-01 | English | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, HELICAL PERFLUOROALKOXY (PFA), STANDARD CONVOLUTION |
| 116 | SAE AS81914/8-2011 | 2011-01-01 | English | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, ANNULAR POLYVINYLIDENE FLUORIDE (PVDF), THERMALLY STABALIZED, STANDARD CONVOLUTIONS |
| 117 | SAE AIR5938-2011 | 2011-01-01 | English | Information on Hard Landings |
| 118 | SAE CMB 7-4A-2011 | 2011-01-01 | English | Glossary of Terms, Acronyms, and Definitions - Formerly TechAmerica CMB 7-4A |
| 119 | SAE AS586C-2011 | 2011-01-01 | English | Wheel and Brake (Sand and Permanent Mold) Castings - Minimum Requirements for Aircraft Applications |
| 120 | SAE ARP5660A-2011 | 2011-01-01 | English | Deicing Facility Operational Procedures |
| 121 | SAE AS5440A-2011 | 2011-01-01 | English | (R) Hydraulic Systems, Military Aircraft, Design and Installation, Requirements For
DoD Adopted |
| 122 | SAE AS5506/2-2011 | 2011-01-01 | English | SAE Architecture Analysis and Design Language (AADL) Annex Volume 2: Annex B: Data Modeling Annex Annex D: Behavior Model Annex Annex F: ARINC653 Annex |
| 123 | SAE J2227-2011 | 2011-01-01 | English | International Tests and Specifications for Automotive Engine Oils |
| 124 | SAE J2052-2011 | 2011-01-01 | English | Test Device Head Contact Duration Analysis |
| 125 | SAE AS85049/89B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 126 | SAE AS85049/88B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 127 | SAE AS85049/76B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 90°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 128 | SAE AS81914/1-2011 | 2011-01-01 | English | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED HELICAL, POLYTETRAFLUOROETHYLENE (PTFE) STANDARD CONVOLUTIONS
DoD Adopted |
| 129 | SAE AS81914-2011 | 2011-01-01 | English | Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification for
DoD Adopted |
| 130 | SAE AS81714/23A-2011 | 2011-01-01 | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, ELECTRONIC, IN-LINE JUNCTIONS, INTEGRAL FUSE, SERIES I
DoD Adopted |
| 131 | SAE AS25486A-2011 | 2011-01-01 | English | CONNECTOR, PLUG, ATTACHABLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 115/200 VOLT, 400 HERTZ
DoD Adopted |
| 132 | SAE AS85049/30A-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, INDIVIDUAL SHIELDED WIRE TERMINATION, CATEGORY 3B (FOR MIL-C-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 133 | SAE AS85049/48B-2011 | 2011-01-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-24308 CONNECTORS)
DoD Adopted |
| 134 | SAE AS85049/52C-2011 | 2011-01-01 | English | CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, NONENVIRONMENTAL, SELF-LOCKING AND NON-SELF-LOCKING, STRAIGHT, CATEGORY 4B (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
D |
| 135 | SAE AS85731A-2011 | 2011-01-01 | English | Fastener, Positive Locking, Electronic Equipment, General Specification For |
| 136 | SAE J1455-2011 | 2011-01-01 | English | Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications |
| 137 | SAE AS85049/47C-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, 90掳, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 138 | SAE AS50861A-2011 | 2011-01-01 | English | Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy
DoD Adopted |
| 139 | SAE AS85731/1A-2011 | 2011-01-01 | English | FASTENER, ELECTRONIC EQUIPMENT, POSITIVE SELF-LOCKING |
| 140 | SAE AMS4394-2011 | 2011-01-01 | English | Magnesium Alloy Welding Wire 2.5Ag - 2.1Di - 0.70Zr (QE22A) - UNS M18220 |
| 141 | SAE AS85049/37A-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, SPLIT 90°, EMI/RFI SHIELDED TERMINATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 142 | SAE AS85049/20B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, RFI/EMI CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
DoD Adopted |
| 143 | SAE AS85049/49C-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, SELF-LOCKING AND NON-SELF-LOCKING, CATEGORY 4C (MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 144 | SAE AS85049/29B-2011 | 2011-01-01 | English | (R) CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
DoD Adopted |
| 145 | SAE J2948-2011 | 2011-01-01 | English | Keyless Ignition Control Design |
| 146 | SAE AIR1922A-2011 | 2011-01-01 | English | (R) Aerospace - System Integration Factors That Affect Hydraulic Pump Life |
| 147 | SAE AIR1871C-2011 | 2011-01-01 | English | (R) Lessons Learned from Developing, Implementing, and Operating a Health Management System for Propulsion and Drive Train Systems |
| 148 | SAE J1630-2011 | 2011-01-01 | English | (R) Airbag Module Deployment Test Procedure |
| 149 | SAE AS483C-2011 | 2011-01-01 | English | Skid Control Equipment |
| 150 | SAE R-402-2010 | 2010-12-06 | English | Performance Metrics for Assessing Driver Distraction - The Quest for Improved Road Safety - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 151 | SAE AMS2431/2E-2010 | 2010-12-01 | English | Peening Media (ASH) Cast Steel Shot, High Hardness (55 to 62 HRC) |
| 152 | SAE AMS-C-83873A-2010 | 2010-12-01 | English | Cleaning Compound, Precoating Surface, Aircraft and Aerospace Ground Equipment (AGE) |
| 153 | SAE AMS-QQ-A-225/8B-2010 | 2010-12-01 | English | Aluminum Alloy 6061, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished - A96061
DoD Adopted |
| 154 | SAE AMS2431/1E-2010 | 2010-12-01 | English | Peening Media (ASR) Cast Steel Shot, Regular Hardness (45 to 52 HRC) |
| 155 | SAE AMS4078H-2010 | 2010-12-01 | English | Aluminum Alloy Sheet and Plate 5.6Zn 鈥?2.5Mg-1.6Cu-0.23Cr 7075: (-T73 Sheet, -T7351 Plate) Solution Heat Treated and Overaged - UNS A97075 |
| 156 | SAE J2611-2010 | 2010-12-01 | English | Off-Road Tire Replacement Guidelines |
| 157 | SAE AS39029/92A-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, REMOVABLE (FOR MIL-PRF-6106 AND MIL-DTL-12883/40 AND /41 RELAY SOCKETS)
DoD Adopted |
| 158 | SAE J1939-21-2010 | 2010-12-01 | English | (R) Data Link Layer |
| 159 | SAE AMS2416L-2010 | 2010-12-01 | English | Plating, Nickel-Cadmium Diffused
DoD Adopted |
| 160 | SAE J1113-42-2010 | 2010-12-01 | English | Electromagnetic Compatibility鈥擟omponent Test Procedure鈥擯art 42鈥擟onducted Transient Emissions |
| 161 | SAE AMS1626C-2010 | 2010-12-01 | English | Desmutter, Aluminum Liquid
DoD Adopted |
| 162 | SAE AMS4392-2010 | 2010-12-01 | English | Magnesium Alloy Welding Wire 4.2Zn - 1.2 Rare Earths - 0.7Zr (ZE41A) - UNS M16410 |
| 163 | SAE AMS2728B-2010 | 2010-12-01 | English | Heat Treatment of Wrought Copper Beryllium Alloy Parts |
| 164 | SAE AMS1625C-2010 | 2010-12-01 | English | Desmutter, Aluminum Powdered
DoD Adopted |
| 165 | SAE ARP5564-2010 | 2010-12-01 | English | Airport Runway Brooms |
| 166 | SAE AMS4294A-2010 | 2010-12-01 | English | Aluminum Alloy Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T5511) Press Heat Treated, Stress Relieved by Stretching, Straightened, and Artificially Aged - UNS A96061 |
| 167 | SAE ARP4754A-2010 | 2010-12-01 | English | (R) Guidelines for Development of Civil Aircraft and Systems |
| 168 | SAE AS39029/44B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 CONNECTORS)
DoD Adopted |
| 169 | SAE AS39029/45B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 CONNECTORS)
DoD Adopted |
| 170 | SAE AMS7905C-2010 | 2010-12-01 | English | Beryllium Bars, Rods, Tubing, and Shapes Optical Grade
DoD Adopted |
| 171 | SAE J2258-2010 | 2010-12-01 | English | (R) Light Utility Vehicles |
| 172 | SAE AMS1626C-2010 | 2010-12-01 | English | Desmutter, Aluminum Liquid |
| 173 | SAE AS34121B-2010 | 2010-12-01 | English | CONNECTORS, RECEPTACLE, ELECTRIC, WALL MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE - WITH ACCESSORY THREADS
DoD Adopted |
| 174 | SAE AMS3277F-2010 | 2010-12-01 | English | Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 掳F (182 掳C)
DoD Adopted |
| 175 | SAE ARP5564-2010 | 2010-12-01 | English | Airport Runway Brooms |
| 176 | SAE AMS2590-2010 | 2010-12-01 | English | Rotary Flap Peening of Metal Parts |
| 177 | SAE AMS7910C-2010 | 2010-12-01 | English | Beryllium Near-Net Preforms Standard Grade Cold Isostatic Pressed, Sintered |
| 178 | SAE AMS7904D-2010 | 2010-12-01 | English | Beryllium Bars, Rods, Tubing, and Shapes High Ductility Grade
DoD Adopted |
| 179 | SAE AMS4049L-2010 | 2010-12-01 | English | Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated - UNS A97075
DoD Adopted |
| 180 | SAE AMS4044M-2010 | 2010-12-01 | English | Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or when specified, "As Fabricated" (7075-F) - UNS A97075 |
| 181 | SAE AMS7902F-2010 | 2010-12-01 | English | Beryllium Sheet and Plate 98Be - UNS R19801 |
| 182 | SAE AS39029/29B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES, AS34501 AND MIL-DTL-83723 SERIES 2 CONNECTORS)
DoD Adopted |
| 183 | SAE AS7974A-2010 | 2010-12-01 | English | (R) Cable Assemblies and Attachable Plugs, External Electrical Power, Aircraft, General Specification For
DoD Adopted |
| 184 | SAE AS39029/34B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS)
DoD Adopted |
| 185 | SAE AMS3281E-2010 | 2010-12-01 | English | Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 掳F (182 掳C)
DoD Adopted |
| 186 | SAE AIR6113-2010 | 2010-12-01 | English | Guidelines for Design of Digital Fiber Optic Link Loss Budget Methodology |
| 187 | SAE AMS2518C-2010 | 2010-12-01 | English | Thread Compound, Anti-Seize, Graphite-Petrolatum
DoD Adopted |
| 188 | SAE AMS7909A-2010 | 2010-12-01 | English | Aluminum Beryllium, NNS Preforms Hot Isostatic Pressed 38Al - 62Be |
| 189 | SAE AMS3253A-2010 | 2010-12-01 | English | Ethylene Propylene Rubber Phosphate Ester Resistant 65 - 75 |
| 190 | SAE AMS7907C-2010 | 2010-12-01 | English | Beryllium Bars, Rods, Tubing, and Shapes Instrument Grade
DoD Adopted |
| 191 | SAE AMS4530H-2010 | 2010-12-01 | English | Copper-Beryllium Alloy Sheet, Strip, and Plate 98Cu - 1.9Be Solution Heat Treated (TB00) - UNS C17200 |
| 192 | SAE AMS4596B-2010 | 2010-12-01 | English | Copper Nickel Tin Alloy, Bars and Rods 77Cu 鈥?15Ni 鈥?8Sn Solution Annealed and Spinodal Hardened (TX 00) - UNS C72900 |
| 193 | SAE AS39029/35B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS)
DoD Adopted |
| 194 | SAE J1939-84-2010 | 2010-12-01 | English | (R) OBD Communications Compliance Test Cases for Heavy Duty Components and Vehicles |
| 195 | SAE AMS4598-2010 | 2010-12-01 | English | Copper Nickel Tin Alloy, Mechanical Tube 77Cu - 15Ni - 8Sn Solution Annealed and Spinodal Hardened (TX 00) - UNS C72900 |
| 196 | SAE AMS5951-2010 | 2010-12-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable - UNS N07208 |
| 197 | SAE J2497-2010 | 2010-12-01 | English | Power Line Carrier Communications for Commercial Vehicles |
| 198 | SAE J1942-1-2010 | 2010-12-01 | English | (R) Qualified Hoses for Marine Applications
DoD Adopted |
| 199 | SAE ARP5316C-2010 | 2010-12-01 | English | (R) Storage of Elastomer Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly
DoD Adopted |
| 200 | SAE AMS-R-6855B-2010 | 2010-12-01 | English | Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes, General Specification for |
| 201 | SAE AMS4045K-2010 | 2010-12-01 | English | Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated - UNS A97075
DoD Adopted |
| 202 | SAE AS81824B-2010 | 2010-12-01 | English | (R) Splices, Electric, Permanent, Crimp Style, Copper, Insulated, Environment Resistant
DoD Adopted |
| 203 | SAE MS1002-2010 | 2010-12-01 | English | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| 204 | SAE AS34661A-2010 | 2010-12-01 | English | CONNECTOR, RECEPTACLE, ELECTRIC, HERMETIC, SOLDER TYPE, BOX MOUNTING, PUSH-PULL COUPLING, SERIES 3 (CLASS H) |
| 205 | SAE AMS7906C-2010 | 2010-12-01 | English | Beryllium Bars, Rods, Tubing, and Shapes Standard Grade
DoD Adopted |
| 206 | SAE AS5457A-2010 | 2010-12-01 | English | Aerospace Standard for Hand-Held Wire Stripper Tools |
| 207 | SAE AS39029/18B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-81511 SERIES 3 AND 4 CONNECTORS)
DoD Adopted |
| 208 | SAE AS81582/2A-2010 | 2010-12-01 | English | (R) CONNECTOR, PLUG, ELECTRIC, BAYONET COUPLING, LANYARD RELEASE, RFI SHIELDED, CRIMP-TYPE CONTACTS, CLASS E
DoD Adopted |
| 209 | SAE AS24586A-2010 | 2010-12-01 | English | SPRING, HELICAL, EXTENSION: FOR LOADS BELOW 30 POUNDS
DoD Adopted |
| 210 | SAE AMS4232B-2010 | 2010-12-01 | English | Aluminum Alloy Extrusions 2.7Cu - 2.2Li - 0.12Zr (2090-T86) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated - UNS A92090 |
| 211 | SAE AS39029/1B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81714 TERMINAL JUNCTION SYSTEM)
DoD Adopted |
| 212 | SAE AIR6113-2010 | 2010-12-01 | English | Guidelines for Design of Digital Fiber Optic Link Loss Budget Methodology |
| 213 | SAE J1708-2010 | 2010-12-01 | English | Serial Data Communications Between Microcomputer Systems in Heavy-Duty Vehicle Applications |
| 214 | SAE AS21984A-2010 | 2010-12-01 | English | CIRCUIT BREAKER-AIRCRAFT, TRIP-FREE PUSH-PULL, 3-PHASE, 5 THRU 60 AMP., TYPE I
DoD Adopted |
| 215 | SAE AMS1454-2010 | 2010-12-01 | English | Cleaning/Scale Removing Compound Aircraft Vacuum Toilet Systems |
| 216 | SAE AS39029/10B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, THERMOCOUPLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS)
DoD Adopted |
| 217 | SAE AS39029/22A-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL, CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS81714 TERMINAL JUNCTION SYSTEM SERIES II AND MIL-C-81511 SERIES 3 AND 4 CLASS L CONNECTORS)
DoD Adopted |
| 218 | SAE AIR6079-2010 | 2010-12-01 | English | Selection of Metallic Spring Energized Seals for Aerospace |
| 219 | SAE AMS1428G-2010 | 2010-12-01 | English | Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV
DoD Adopted |
| 220 | SAE AMS7705F-2010 | 2010-12-01 | English | Nickel-Iron Magnetic Alloy, Bars and Forgings
DoD Adopted |
| 221 | SAE AS39029/5B-2010 | 2010-12-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS AND MIL-DTL-12883/40 AND /41 RELAY SOCKETS)
DoD Adopted |
| 222 | SAE AMS7702F-2010 | 2010-12-01 | English | Nickel-Iron Alloy, Magnetic, Sheet and Strip Cold Rolled, Half-Hard Temper
DoD Adopted |
| 223 | SAE PT-146-2010 | 2010-11-16 | English | Green Technologies and The Mobility Industry - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 224 | SAE/TP 2010-01-1737-2010 | 2010-11-03 | English | Constrained Dynamic Inversion Control and Its Application to Turbomachinery |
| 225 | SAE/TP 2010-01-1756-2010 | 2010-11-02 | English | A Modular Power System Architecture for Military and Commercial Electric Vehicles |
| 226 | SAE/TP 2010-01-1800-2010 | 2010-11-02 | English | Double Bypass Turbofan Engine Modeling including Transient Effects |
| 227 | SAE/TP 2010-01-1801-2010 | 2010-11-02 | English | Region of Asymptotic Stability Estimation with Lyapunov Function Optimization and the Average Derivative Method |
| 228 | SAE/TP 2010-01-1806-2010 | 2010-11-02 | English | Automated Model Evaluation and Verification of Aircraft Components |
| 229 | SAE/TP 2010-01-1791-2010 | 2010-11-02 | English | A Fuel-Cell Electric Vehicle with Cracking and Electrolysis of Ammonia |
| 230 | SAE/TP 2010-01-1792-2010 | 2010-11-02 | English | Practical Requirements for New High-Temperature Batteries In Drilling |
| 231 | SAE/TP 2010-01-1790-2010 | 2010-11-02 | English | Radial Accelerated Cavitation and its use in Fuel Reformation |
| 232 | SAE/TP 2010-01-1750-2010 | 2010-11-02 | English | Adaptive Protection Methods for Aircraft Applications |
| 233 | SAE/TP 2010-01-1789-2010 | 2010-11-02 | English | DME Hybrid Power System with CO2 Recycling for Commercial Vehicles |
| 234 | SAE/TP 2010-01-1793-2010 | 2010-11-02 | English | Evaluating High Temperature/High Voltage Packaging for SiC Power Electronics |
| 235 | SAE/TP 2010-01-1788-2010 | 2010-11-02 | English | Potential Technology to Unclog Hot Day Operational Limit |
| 236 | SAE/TP 2010-01-1807-2010 | 2010-11-02 | English | An Algebraic-Summation-Based 3-ph Phase-Locked Loop in Aerospace Applications |
| 237 | SAE/TP 2010-01-1809-2010 | 2010-11-02 | English | Effects of Line and Load Conditions on TRU and ATRU Input Current Harmonics |
| 238 | SAE/TP 2010-01-1810-2010 | 2010-11-02 | English | Hardware-in-the-Loop Electric Drive Stand Issues for Jet Engine Simulation |
| 239 | SAE/TP 2010-01-1812-2010 | 2010-11-02 | English | Integrated Electrical and Thermal Management Sub-system Optimization |
| 240 | SAE/TP 2010-01-1813-2010 | 2010-11-02 | English | A Methodology to Predict Axial Clamping Force and Anti-rotating Torque for V-band Joint |
| 241 | SAE/TP 2010-01-1785-2010 | 2010-11-02 | English | Investigation of Tradeoffs between Efficiency, Mass, Cost, Service Factor, and Power Factor in Induction Machines |
| 242 | SAE/TP 2010-01-1804-2010 | 2010-11-02 | English | Integrated Aircraft Electrical Power System Modeling and Simulation Analysis |
| 243 | SAE/TP 2010-01-1805-2010 | 2010-11-02 | English | Power Thermal Management System Design for Enhanced Performance in an Aircraft Vehicle |
| 244 | SAE/TP 2010-01-1795-2010 | 2010-11-02 | English | HV Design Guidelines on Aerospace (and Air) Vehicles |
| 245 | SAE/TP 2010-01-1798-2010 | 2010-11-02 | English | High Temperature, High Frequency SiC Three Phase Inverter for Aircraft Applications |
| 246 | SAE/TP 2010-01-1786-2010 | 2010-11-02 | English | A Hybrid Economy Bleed, Electric Drive Adaptive Power and Thermal Management System for More Electric Aircraft |
| 247 | SAE/TP 2010-01-1799-2010 | 2010-11-02 | English | Air-Launched Expendable Small Unmanned Aircraft Systems: Increasing Power and Extending Endurance to Meet Operational Needs |
| 248 | SAE/TP 2010-01-1784-2010 | 2010-11-02 | English | Vacua Buoyancy Is Provided by a Vacuum Bag Comprising a Vacuum Membrane Film Wrapped Around a Three-Dimensional (3D) Frame to Displace Air, on Which 3D Graphene “Floats” a First Stack of Two-Dimensional Planer Sheets of Six- Member Carbon Atoms Within the |
| 249 | SAE/TP 2010-01-1787-2010 | 2010-11-02 | English | Facilitating the Energy Optimization of Aircraft Propulsion and Thermal Management Systems through Integrated Modeling and Simulation |
| 250 | SAE/TP 2010-01-1725-2010 | 2010-11-02 | English | A Framework for Developing an EPS Health Management System |
| 251 | SAE/TP 2010-01-1726-2010 | 2010-11-02 | English | Development of Self-Healing High Temperature Film Capacitors for Power Electronics Applications |
| 252 | SAE/TP 2010-01-1727-2010 | 2010-11-02 | English | High Temperature Capable Ionic Polymer-Metal Composite Capacitors and Power Storage Systems |
| 253 | SAE/TP 2010-01-1728-2010 | 2010-11-02 | English | Thermo-Mechanical Reliability of Nano-Silver Sintered Joints versus Lead-Free Solder Joints for Attaching Large-Area Silicon Devices |
| 254 | SAE/TP 2010-01-1782-2010 | 2010-11-02 | English | Reconfigurable Aircraft DC Power Networks Laboratory |
| 255 | SAE/TP 2010-01-1781-2010 | 2010-11-02 | English | Thermal Management and Power Generation for Directed Energy Weapons |
| 256 | SAE/TP 2010-01-1780-2010 | 2010-11-02 | English | Improving Peak Power Capability of an Aircraft |
| 257 | SAE/TP 2010-01-1779-2010 | 2010-11-02 | English | The Modular Design of an Aircraft Power Distribution System |
| 258 | SAE/TP 2010-01-1729-2010 | 2010-11-02 | English | Assessment of High-Temperature Encapsulants for Planar Packages |
| 259 | SAE/TP 2010-01-1731-2010 | 2010-11-02 | English | Experimental Validation of a Simple Analytical Model for Specific Heat Capacity of Aqueous Nanofluids |
| 260 | SAE/TP 2010-01-1778-2010 | 2010-11-02 | English | A Method of Shared Regenerative Power Management |
| 261 | SAE/TP 2010-01-1777-2010 | 2010-11-02 | English | Modular Digital Power Factor Correction for Aerospace Applications |
| 262 | SAE/TP 2010-01-1776-2010 | 2010-11-02 | English | Integration of a Microtubular Solid Oxide Fuel Cell into a Mini-UAV: Design and Simulation of Power System Architecture |
| 263 | SAE/TP 2010-01-1770-2010 | 2010-11-02 | English | System Integration of a Safe, High Power, Lithium Ion Main Battery into a Civil Aviation Aircraft |
| 264 | SAE/TP 2010-01-1768-2010 | 2010-11-02 | English | Enhanced Identification Algorithms for Battery Models under Noisy Measurements |
| 265 | SAE/TP 2010-01-1767-2010 | 2010-11-02 | English | Tracking Over Insulating Surfaces In Aerospace Environments |
| 266 | SAE/TP 2010-01-1732-2010 | 2010-11-02 | English | Thermal Analysis of Carbon Nanotubes Suspended in PAO Mixtures |
| 267 | SAE/TP 2010-01-1766-2010 | 2010-11-02 | English | Fault Mitigation and Cell Balancing of High Power Lithium Ion Battery Packs |
| 268 | SAE/TP 2010-01-1765-2010 | 2010-11-02 | English | SOH Recognition of Li-ion Aviation Batteries Via Passive Diagnostic Device |
| 269 | SAE/TP 2010-01-1733-2010 | 2010-11-02 | English | Evaluation of a Vapor-Compression Thermal Management System for Reliability While Operating Under Thermal Transients |
| 270 | SAE/TP 2010-01-1764-2010 | 2010-11-02 | English | Controlling and Monitoring Linear Actuators via the Power Distribution System |
| 271 | SAE/TP 2010-01-1762-2010 | 2010-11-02 | English | SoH Recognition of Aviation Batteries Via Passive Diagnostic Device |
| 272 | SAE/TP 2010-01-1734-2010 | 2010-11-02 | English | Enhanced Specific Heat Capacity of Molten Salt-Metal Oxide Nanofluid as Heat Transfer Fluid for Solar Thermal Applications |
| 273 | SAE/TP 2010-01-1735-2010 | 2010-11-02 | English | Investigation of Thermal Characteristics of Nanofluids During Flow in a Micro-channel Using an Array of Surface Temperature-Nano-Sensors |
| 274 | SAE/TP 2010-01-1736-2010 | 2010-11-02 | English | Electronics Cooling Using High Temperature Loop Heat Pipes With Multiple Condensers |
| 275 | SAE/TP 2010-01-1738-2010 | 2010-11-02 | English | Power Flow Analysis for a Two-stage Direct Power Converter for Use in an Aircraft Aileron Application |
| 276 | SAE/TP 2010-01-1740-2010 | 2010-11-02 | English | Analysis and Reduction of Common-Mode EMI in Electric Actuators for VF MEA |
| 277 | SAE/TP 2010-01-1761-2010 | 2010-11-02 | English | Model Based Diagnostics of an Aircraft Generator Using AAKR and SPRT |
| 278 | SAE/TP 2010-01-1741-2010 | 2010-11-02 | English | A Reduced-Order Enclosure Radiation Modeling Technique for Aircraft Actuators |
| 279 | SAE/TP 2010-01-1742-2010 | 2010-11-02 | English | Integrated Nonlinear Dynamic Modeling and Field Oriented Control of Permanent Magnet (PM) Motor for High Performance EMA |
| 280 | SAE/TP 2010-01-1743-2010 | 2010-11-02 | English | Fault-Tolerant Electrical Motor Drives for Aerospace Application |
| 281 | SAE/TP 2010-01-1744-2010 | 2010-11-02 | English | An Electromechanically Actuated Nose Landing Gear Using a Dual-Output Motor Control Unit |
| 282 | SAE/TP 2010-01-1745-2010 | 2010-11-02 | English | More Electrical Actuation for ATA 32 : Modular Power Electronics & Electrical Motor Concepts |
| 283 | SAE/TP 2010-01-1746-2010 | 2010-11-02 | English | An Overview of Electrically Powered Control Actuation Health Management |
| 284 | SAE/TP 2010-01-1747-2010 | 2010-11-02 | English | Control Strategy for Electro-Mechanical Actuators Versus Hydraulic Actuation Systems for Aerospace Applications |
| 285 | SAE/TP 2010-01-1748-2010 | 2010-11-02 | English | Dynamic Testing of Electromechanical Actuators Using Time-history Data |
| 286 | SAE/TP 2010-01-1758-2010 | 2010-11-02 | English | Advanced Electric Generators for Aerospace More Electric Architectures |
| 287 | SAE/TP 2010-01-1757-2010 | 2010-11-02 | English | Converging Technologies for Electric/Hybrid Vehicles and More Electric Aircraft Systems |
| 288 | SAE/TP 2010-01-1751-2010 | 2010-11-02 | English | Practical Hybrid Contactors |
| 289 | SAE/TP 2010-01-1752-2010 | 2010-11-02 | English | A Scalable Hybrid Power and Energy Architecture for Unmanned Ground Vehicles |
| 290 | SAE/TP 2010-01-1753-2010 | 2010-11-02 | English | Actuator Remaining Life Estimation Under Fault Tolerant Operation |
| 291 | SAE/TP 2010-01-1749-2010 | 2010-11-02 | English | Lumped Node Thermal Modeling of EMA with FEA Validation |
| 292 | SAE/TP 2010-01-1754-2010 | 2010-11-02 | English | Inverter-Motor System EMI Reduction by Impedance Balancing |
| 293 | SAE/TP 2010-01-1755-2010 | 2010-11-02 | English | Standardized Electrical Power Quality Analysis in Accordance with MIL-STD-704 |
| 294 | SAE AS5901B-2010 | 2010-11-01 | English | (R) Water Spray and High Humidity Endurance Test Methods for SAE AMS1424 and SAE AMS1428 Aircraft Deicing/Anti-icing Fluids |
| 295 | SAE AS6060-2010 | 2010-11-01 | English | JAUS Environment Sensing Service Set |
| 296 | SAE J526-2010 | 2010-11-01 | English | (R) Welded Low-Carbon Steel Tubing Suitable for Bending, Flaring, Beading, Forming and Brazing
DoD Adopted |
| 297 | SAE AIR4071A-2010 | 2010-11-01 | English | Lubricants for Oxygen Use |
| 298 | SAE AS4705C-2010 | 2010-11-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45 DEGREES MALE |
| 299 | SAE AIR4071A-2010 | 2010-11-01 | English | Lubricants for Oxygen Use |
| 300 | SAE AS4706C-2010 | 2010-11-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90 DEGREES MALE |
| 301 | SAE AS39029/49A-2010 | 2010-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-22992 CLASS L CONNECTORS)
DoD Adopted |
| 302 | SAE AS39029/48A-2010 | 2010-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-22992 CLASS L CONNECTORS) |
| 303 | SAE AS39029/48A-2010 | 2010-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-C-22992 CLASS L CONNECTORS)
DoD Adopted |
| 304 | SAE AS21921C-2010 | 2010-11-01 | English | NUT, SLEEVE COUPLING, FLARELESS
DoD Adopted |
| 305 | SAE AS39029/49A-2010 | 2010-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-22992 CLASS L CONNECTORS) |
| 306 | SAE AS39029/71A-2010 | 2010-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-DTL-38999 SERIES I, II, III, AND IV, MIL-DTL-24308, MIL-DTL-83733, AND MIL-DTL-55302/69 CONNECTORS) |
| 307 | SAE AMS4209C-2010 | 2010-11-01 | English | Aluminum Alloy Sheet, Alclad 6.0Cu - 0.40Zr - (2004-F) As Rolled - UNS A82004 |
| 308 | SAE AS39029/54A-2010 | 2010-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)
DoD Adopted |
| 309 | SAE AMS5867B-2010 | 2010-11-01 | English | Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed - UNS S41000 |
| 310 | SAE AMS-H-6875B-2010 | 2010-11-01 | English | Heat Treatment of Steel Raw Materials
DoD Adopted |
| 311 | SAE AMS5865E-2010 | 2010-11-01 | English | Nickel, Corrosion and Heat Resistant, Sheet and Strip Thoria Dispersion Strengthened 2.2Th02 - UNS N03260
DoD Adopted |
| 312 | SAE AMS4184G-2010 | 2010-11-01 | English | Filler Metal, Aluminum Brazing 10Si - 4.0Cu (4145) - UNS A94145 |
| 313 | SAE ARP5707-2010 | 2010-11-01 | English | Pilot Training Recommendations for Unmanned Aircraft Systems (UAS) Civil Operations |
| 314 | SAE AMS7912C-2010 | 2010-11-01 | English | Aluminum-Beryllium Alloy, Extrusions 38Al - 62Be Annealed |
| 315 | SAE AMS3619D-2010 | 2010-11-01 | English | Resin, Polyimide, Laminating High Temperature Resistant, 315 掳C (599 掳F)
DoD Adopted |
| 316 | SAE ARP5707-2010 | 2010-11-01 | English | Pilot Training Recommendations for Unmanned Aircraft Systems (UAS) Civil Operations |
| 317 | SAE AS85028/6A-2010 | 2010-11-01 | English | CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, REPLACEMENT TOOL, WIRE SEAL, SIZE 16, CRIMP REMOVABLE CONTACTS
DoD Adopted |
| 318 | SAE AMS4209C-2010 | 2010-11-01 | English | Aluminum Alloy Sheet, Alclad 6.0Cu - 0.40Zr - (2004-F) As Rolled - UNS A82004 |
| 319 | SAE AS6040-2010 | 2010-11-01 | English | JAUS HMI Service Set |
| 320 | SAE AMS5867B-2010 | 2010-11-01 | English | Steel, Corrosion and Heat Resistant, Forgings 12.5Cr (410) Enhanced Fracture Toughness, Annealed - UNS S41000 |
| 321 | SAE AMS7911C-2010 | 2010-11-01 | English | Aluminum Beryllium, Preforms Hot Isostatic Pressed and Heat Treated 38Al - 62Be |
| 322 | SAE ARP1088B-2010 | 2010-11-01 | English | (R) Aircraft Indicating Systems |
| 323 | SAE AS5857A-2010 | 2010-11-01 | English | Gland Design, O-ring and Other Elastomeric Seals, Static Applications |
| 324 | SAE AMS7913C-2010 | 2010-11-01 | English | Aluminum-Beryllium Alloy, Sheet and Plate 38Al - 62Be
DoD Adopted |
| 325 | SAE AS5857A-2010 | 2010-11-01 | English | Gland Design, O-ring and Other Elastomeric Seals, Static Applications |
| 326 | SAE ARP5741-2010 | 2010-11-01 | English | Air Mode Active Containers Conditioning Performance |
| 327 | SAE AS5603A-2010 | 2010-11-01 | English | (R) Digital Fiber Optic Link Loss Budget Methodology for Aerospace Platforms |
| 328 | SAE AS4796C-2010 | 2010-11-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO STRAIGHT MALE |
| 329 | SAE AS4797C-2010 | 2010-11-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 45 DEGREES MALE |
| 330 | SAE AS4798C-2010 | 2010-11-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90 DEGREES MALE |
| 331 | SAE AMS3613D-2010 | 2010-11-01 | English | Film, Copper Clad Polyester
DoD Adopted |
| 332 | SAE AMS5638G-2010 | 2010-11-01 | English | Steel, Corrosion-Resistant, Bars and Forgings 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al (303MA) Free-Machining; Swaging or Upsetting Solution Heat Treated - UNS S30345
DoD Adopted |
| 333 | SAE AS5603A-2010 | 2010-11-01 | English | (R) Digital Fiber Optic Link Loss Budget Methodology for Aerospace Platforms |
| 334 | SAE AS33481A-2010 | 2010-11-01 | English | CONTACT BUSHING, ELECTRIC, WIRE BARREL
DoD Adopted |
| 335 | SAE AMS4221C-2010 | 2010-11-01 | English | Aluminum Alloy, Plate 4.4Cu - 1.5Mg - 0.60Mn (2124-T8151) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated - UNS A92124 |
| 336 | SAE J1192-2010 | 2010-11-01 | English | Performance of Audible Warning Devices for Motorcycles |
| 337 | SAE ARP1088B-2010 | 2010-11-01 | English | (R) Aircraft Indicating Systems |
| 338 | SAE AS81306-2010 | 2010-11-01 | English | Wiring Installation Tools for Bands and Tiedown Straps |
| 339 | SAE AIR4543B-2010 | 2010-11-01 | English | (R) Aerospace Hydraulics and Actuation Lessons Learned |
| 340 | SAE AIR4740A-2010 | 2010-11-01 | English | Safety Considerations 鈥?Smoking in Lavatories of Transport Aircraft |
| 341 | SAE J312-2010 | 2010-11-01 | English | Automotive Gasolines |
| 342 | SAE AS6040-2010 | 2010-11-01 | English | JAUS HMI Service Set |
| 343 | SAE J2210-2010 | 2010-11-01 | English | HFC-134a (R-134a) Recovery/Recycling Equipment for Mobile Air-Conditioning Systems |
| 344 | SAE AMS-P-5516A-2010 | 2010-11-01 | English | Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160掳F |
| 345 | SAE AS85028/1A-2010 | 2010-11-01 | English | CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, PLUG, CRIMP REMOVABLE PIN CONTACTS, CLASS E
DoD Adopted |
| 346 | SAE J1770-2010 | 2010-11-01 | English | AUTOMOTIVE REFRIGERANT RECOVERY/RECYCLING EQUIPMENT INTENDED FOR USE WITH BOTH R12 AND R134A |
| 347 | SAE AMS3678/4A-2010 | 2010-11-01 | English | Type 4 25% Glass Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 348 | SAE AS85028/2A-2010 | 2010-11-01 | English | CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER HARDWARE, RECEPTACLE, CRIMP REMOVABLE SOCKET CONTACTS, CLASS E
DoD Adopted |
| 349 | SAE AMS3678/5A-2010 | 2010-11-01 | English | Type 5 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with Pigment |
| 350 | SAE AMS3678/6A-2010 | 2010-11-01 | English | Type 6 60% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 351 | SAE AMS3678C-2010 | 2010-11-01 | English | Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled |
| 352 | SAE AS6060-2010 | 2010-11-01 | English | JAUS Environment Sensing Service Set |
| 353 | SAE AMS3678/8A-2010 | 2010-11-01 | English | Type 8 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 10% Carbon Fiber |
| 354 | SAE AMS3678/7A-2010 | 2010-11-01 | English | Type 7 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 25% Carbon and Graphite |
| 355 | SAE AS1421A-2010 | 2010-11-01 | English | Aerospace Selected Diameter - Pitch Combinations of Metric 60 degrees Screw Threads for Shaft or Bearing Retaining Screw Threads |
| 356 | SAE AS39029/72A-2010 | 2010-11-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-DTL-38999 SERIES I, II, III, AND IV,MIL-DTL-24308, AND MIL-DTL-55302/68, /71, AND /75 CONNECTORS)
DoD Adopted |
| 357 | SAE AMS4184G-2010 | 2010-11-01 | English | Filler Metal, Aluminum Brazing 10Si - 4.0Cu (4145) - UNS A94145
DoD Adopted |
| 358 | SAE AMS3678/16-2010 | 2010-11-01 | English | Type 16 15% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 359 | SAE AMS3678/1B-2010 | 2010-11-01 | English | Type 1 Virgin Polytetrafluoroethylene (PTFE) Moldings and Extrusions |
| 360 | SAE AMS3678/9B-2010 | 2010-11-01 | English | Type 9 Virgin Polytetrafluoroethylene (PTFE) Moldings with Pigment for AS4716 and AS5857 Backup Rings |
| 361 | SAE AMS3678/10A-2010 | 2010-11-01 | English | Type 10 Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions with 15% Carbon Fiber |
| 362 | SAE AS4802C-2010 | 2010-11-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 45 DEGREES FEMALE |
| 363 | SAE AS4803C-2010 | 2010-11-01 | English | HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO 90 DEGREES FEMALE |
| 364 | SAE AMS3678/11-2010 | 2010-11-01 | English | Type 11 10% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 365 | SAE AMS3678/12-2010 | 2010-11-01 | English | Type 12 10% Mineral, 2.5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 366 | SAE AMS3678/13-2010 | 2010-11-01 | English | Type 13 10% Polyimide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 367 | SAE AMS2243J-2010 | 2010-11-01 | English | Tolerances Corrosion and Heat-Resistant Steel Tubing
DoD Adopted |
| 368 | SAE AMS3678/2A-2010 | 2010-11-01 | English | Type 2 15% Graphite Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 369 | SAE AMS3678/14-2010 | 2010-11-01 | English | Type 14 40% Bronze Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 370 | SAE AMS3678/15-2010 | 2010-11-01 | English | Type 15 15% Aromatic Polymer Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 371 | SAE AMS3678/3A-2010 | 2010-11-01 | English | Type 3 15% Glass, 5% Molybdenum Disulfide Filled Virgin Polytetrafluoroethylene (PTFE) Moldings or Extrusions |
| 372 | SAE AS39029/71A-2010 | 2010-11-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, REMOVABLE, SOLDERLESS WRAPPOST TERMINATION (FOR MIL-DTL-38999 SERIES I, II, III AND IV,MIL-DTL-24308, MIL-DTL-83733, AND MIL-DTL-55302/69 CONNECTORS)
DoD Adopted |
| 373 | SAE/TP 2010-01-2147-2010 | 2010-10-25 | English | 2-Stroke Diesel Engine for Light Aircraft: IDI vs. DI Combustion Systems |
| 374 | SAE AIR5686-2010 | 2010-10-01 | English | A Methodology for Assessing Inlet Swirl Distortion |
| 375 | SAE AS39029/28A-2010 | 2010-10-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES I, II, III AND IV CONNECTORS)
DoD Adopted |
| 376 | SAE AMS4208C-2010 | 2010-10-01 | English | Aluminum Alloy Sheet 6.0Cu - 0.40Zr - (2004-F) As Rolled - UNS A92004 |
| 377 | SAE AS90362A-2010 | 2010-10-01 | English | CONNECTOR, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 115/200 VOLT, 400 HERTZ |
| 378 | SAE AIR5552-2010 | 2010-10-01 | English | Development and Qualification of Composite Landing Gears |
| 379 | SAE AS5756/3A-2010 | 2010-10-01 | English | CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR |
| 380 | SAE ARP6400-2010 | 2010-10-01 | English | Recommended Practice for Processing and Handling Wire and Cable with Silver Plated Conductors and Shields |
| 381 | SAE AS7928/11A-2010 | 2010-10-01 | English | TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TIN WHISKER RESISTANT, TYPE I, CLASS I, FOR 175 掳C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 382 | SAE AMS4208C-2010 | 2010-10-01 | English | Aluminum Alloy Sheet 6.0Cu - 0.40Zr - (2004-F) As Rolled - UNS A92004 |
| 383 | SAE AIR5686-2010 | 2010-10-01 | English | A Methodology for Assessing Inlet Swirl Distortion |
| 384 | SAE AMS3612C-2010 | 2010-10-01 | English | Polyester Film Electrical Grade, General Purpose |
| 385 | SAE AMS7310L-2010 | 2010-10-01 | English | Rings, Piston, Cast Iron As Cast |
| 386 | SAE AMS7310L-2010 | 2010-10-01 | English | Rings, Piston, Cast Iron As Cast |
| 387 | SAE J2534-2-2010 | 2010-10-01 | English | (R) Optional Pass-Thru Features |
| 388 | SAE J1244-2010 | 2010-10-01 | English | Oil Cooler Nomenclature and Glossary |
| 389 | SAE AS22759/89C-2010 | 2010-10-01 | English | WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/ POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 200 掳C, 600 VOLTS
DoD Adopted |
| 390 | SAE AMS5928-2010 | 2010-10-01 | English | Steel, Corrosion-Resistant, Bars, Wire, and Forgings 12Cr - 9Ni - 2Mo 鈥?0.7Al 鈥?0.3Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S11800 |
| 391 | SAE MS1004-2010 | 2010-10-01 | English | Lubricants, Industrial Oils, and Related Products Type H (Hydrualic Fluids) - Specification |
| 392 | SAE J1306-2010 | 2010-10-01 | English | Motorcycle Auxiliary Front Lamps |
| 393 | SAE AMS4900N-2010 | 2010-10-01 | English | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength - UNS R50550 |
| 394 | SAE J2782-2010 | 2010-10-01 | English | Performance Specifications for a Midsize Male Pedestrian Research Dummy |
| 395 | SAE AS7928/12A-2010 | 2010-10-01 | English | TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER RESISTANT, TYPE II, CLASS 1, (FOR 105 掳C TOTAL CONDUCTOR TEMPERATURE)
DoD Adopted |
| 396 | SAE AIR5552-2010 | 2010-10-01 | English | Development and Qualification of Composite Landing Gears |
| 397 | SAE AS5756/3A-2010 | 2010-10-01 | English | CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR
DoD Adopted |
| 398 | SAE J2420-2010 | 2010-10-01 | English | COE Frontal Strength Evaluation鈥擠ynamic Loading Heavy Trucks |
| 399 | SAE AMS4391-2010 | 2010-10-01 | English | Magnesium Alloy Welding Wire 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A) - UNS M12310 |
| 400 | SAE AMS4290L-2010 | 2010-10-01 | English | Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast - UNS A03600 |
| 401 | SAE AMS4291H-2010 | 2010-10-01 | English | Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast - UNS A13800 |
| 402 | SAE J1488-2010 | 2010-10-01 | English | Emulsified Water/Fuel Separation Test Procedure |
| 403 | SAE AMS4393-2010 | 2010-10-01 | English | Magnesium Alloy Welding Wire 4.0Y - 2.3Nd - 0.7Zr (WE43B) - UNS M18432 |
| 404 | SAE AMS4395F-2010 | 2010-10-01 | English | Magnesium Alloy Welding Wire 9.0Al - 2.0Zn (AZ92A) - UNS M11922
DoD Adopted |
| 405 | SAE AS5756/4A-2010 | 2010-10-01 | English | CABLE, ELECTRICAL, 600 VOLTS, PORTABLE, MULTICONDUCTOR, OZONE RESISTANT
DoD Adopted |
| 406 | SAE AMS4398-2010 | 2010-10-01 | English | Magnesium Alloy Welding Wire 8.7Al - 0.70Zn - 0.26Mn (AZ91E) - UNS M11919 |
| 407 | SAE AMS4399-2010 | 2010-10-01 | English | Magnesium Alloy Welding Wire 5.1Y - 3.0Re - 0.7Zr (WE54A) - UNS M18410 |
| 408 | SAE HS-1939-2010 | 2010-10-01 | English | SAE Truck and Bus Control Communications Network Standards Manual |
| 409 | SAE AS39029/75A-2010 | 2010-10-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS)
DoD Adopted |
| 410 | SAE AMS4400-2010 | 2010-10-01 | English | Magnesium Alloy Welding Wire 1.5Ag - 2.1Di - 0.08Cu - 0.70Zr (EQ21A) - UNS M18330 |
| 411 | SAE AS81714/12A-2010 | 2010-10-01 | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, DOUBLE, SERIES I
DoD Adopted |
| 412 | SAE AMS5545F-2010 | 2010-10-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni 鈥?19Cr 鈥?11Co 鈥?9.8Mo 鈥?3.2Ti 鈥?1.5Al 鈥?0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable Precipitation Heat Treated - UNS N07041
DoD Adopted |
| 413 | SAE AS90362A-2010 | 2010-10-01 | English | CONNECTOR, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 115/200 VOLT, 400 HERTZ |
| 414 | SAE ARP6400-2010 | 2010-10-01 | English | Recommended Practice for Processing and Handling Wire and Cable with Silver Plated Conductors and Shields |
| 415 | SAE J1468-2010 | 2010-10-01 | English | (R) Oil Cooler Application Testing and Nomenclature |
| 416 | SAE J1750-2010 | 2010-10-01 | English | (R) Describing and Evaluating the Truck Driver's Viewing Environment |
| 417 | SAE AMS2431C-2010 | 2010-10-01 | English | Peening Media General Requirements |
| 418 | SAE AMS2642D-2010 | 2010-10-01 | English | Structural Examination of Titanium Alloys Etch-Anodize Inspection Procedure |
| 419 | SAE J2414-2010 | 2010-10-01 | English | Application Testing of Oil-to-Water Oil Coolers for Heat Transfer Performance |
| 420 | SAE AMS2417H-2010 | 2010-10-01 | English | Plating, Zinc-Nickel Alloy
DoD Adopted |
| 421 | SAE J2675-2010 | 2010-10-01 | English | (R) Combined Cornering and Braking Test for Truck and Bus Tires
DoD Adopted |
| 422 | SAE AIR1059C-2010 | 2010-10-01 | English | (R) Oxygen Cylinder Quality, Serviceability, Maintenance Transfilling and Marking |
| 423 | SAE AS90362A-2010 | 2010-10-01 | English | CONNECTOR, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, 115/200 VOLT, 400 HERTZ
DoD Adopted |
| 424 | SAE AS7928/6A-2010 | 2010-10-01 | English | TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, (PERMANENT, TYPE II, CLASS 1) FOR 150°C TOTAL CONDUCTOR TEMPERATURE |
| 425 | SAE AMS4937C-2010 | 2010-10-01 | English | Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat Treatable - UNS R56620 |
| 426 | SAE AS20659C-2010 | 2010-10-01 | English | TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS 1, FOR 175 DEGREES C TOTAL CONDUCTOR TEMPERATURE
DoD Adopted |
| 427 | SAE AS39029/17B-2010 | 2010-10-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-C-81511 SERIES 3 CONNECTORS)
DoD Adopted |
| 428 | SAE AS39029/27A-2010 | 2010-10-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES II CONNECTORS)
DoD Adopted |
| 429 | SAE AMS4777H-2010 | 2010-10-01 | English | Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 掳F (971 to 999 掳C) Solidus-Liquidus Range - UNS N99620
DoD Adopted |
| 430 | SAE AMS4776H-2010 | 2010-10-01 | English | Nickel Alloy, Brazing Filler Metal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 掳F (977 to 1077 掳C) Solidus-Liquidus Range - UNS N99610
DoD Adopted |
| 431 | SAE AMS4775J-2010 | 2010-10-01 | English | Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 Degrees F (977 to 1077 Degrees C) Solidus-Liquidus Range - UNS N99600
DoD Adopted |
| 432 | SAE CS2629-2010 | 2010-10-01 | English | Companion Spreadsheet to J2629 - See Also SAE J2629; Includes Access to Additional Content |
| 433 | SAE AS5545-2010 | 2010-10-01 | English | NUT COUPLING, FLARELESS, EXTRA FINE THREAD, 5080 PSI, |
| 434 | SAE J2868-2010 | 2010-10-01 | English | Pedestrian Dummy Full Scale Test Results and Resource Materials |
| 435 | SAE AMS4096C-2010 | 2010-10-01 | English | Aluminum Alloy Sheet and Plate, Alclad 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (Alclad 2219-O) Annealed - UNS A92219 |
| 436 | SAE AS22520/3-2010 | 2010-10-01 | English | CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS |
| 437 | SAE AS2592-2010 | 2010-10-01 | English | Flap Assemblies, Rotary Flap Peening |
| 438 | SAE ARP6400-2010 | 2010-10-01 | English | Recommended Practice for Processing and Handling Wire and Cable with Silver Plated Conductors and Shields |
| 439 | SAE J1612-2010 | 2010-10-01 | English | Cab Heating Systems Test Procedure and Performance Requirements鈥擳rucks, and Multipurpose Vehicles |
| 440 | SAE AMS7701F-2010 | 2010-10-01 | English | Nickel-Iron Alloy, Magnetic, Sheet and Strip Annealed
DoD Adopted |
| 441 | SAE AS25036B-2010 | 2010-10-01 | English | TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 105 掳C TOTAL CONDUCTOR TEMPERATURE)
DoD Adopted |
| 442 | SAE AS81714/63A-2010 | 2010-10-01 | English | TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, GROUNDING MODULES, STUD AND FLANGE TYPE MOUNTING, SERIES II
DoD Adopted |
| 443 | SAE AMS4944H-2010 | 2010-10-01 | English | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved - UNS R56320
DoD Adopted |
| 444 | SAE J1839-2010 | 2010-10-01 | English | Coarse Droplet Water/Fuel Separation Test Procedure |
| 445 | SAE/TP 2010-01-1834-2010 | 2010-09-28 | English | Fabrication of Titanium Aerospace Hardware using Elevated Temperature Forming Processes |
| 446 | SAE/TP 2010-01-1827-2010 | 2010-09-28 | English | The Automated Drilling System for Wing Panel |
| 447 | SAE/TP 2010-01-1860-2010 | 2010-09-28 | English | Methods for Metrology Assisted Composite Part Production Part 1 |
| 448 | SAE/TP 2010-01-1859-2010 | 2010-09-28 | English | Robot Integrated Metrology for Complex Part Manufacturing |
| 449 | SAE/TP 2010-01-1858-2010 | 2010-09-28 | English | Method for Metrology Assisted Composite Part Production Part 2 |
| 450 | SAE/TP 2010-01-1857-2010 | 2010-09-28 | English | Indoor Global Positioning Measurement System Application for the Aircraft Flexible Joint Assembly |
| 451 | SAE/TP 2010-01-1856-2010 | 2010-09-28 | English | Trajectory Planning of Large Subassemblies Mergence with a Multi-Robot Coordinated Manipulation System |
| 452 | SAE/TP 2010-01-1830-2010 | 2010-09-28 | English | Shock Wave Formation and Aerodynamic Heating in the Presence of a Protrusion on Flat Plate in High Speed Flow |
| 453 | SAE/TP 2010-01-1855-2010 | 2010-09-28 | English | Self Adapting Parallel Kinematic Machines for Large Wing and Fuselage Assembly |
| 454 | SAE/TP 2010-01-1854-2010 | 2010-09-28 | English | The Effects of Surface Texture on Fretting Fatigue between Fastener and Aluminum Structure |
| 455 | SAE/TP 2010-01-1853-2010 | 2010-09-28 | English | Solution for Dry-Fiber-Placement with a Standard Articulating Robot System |
| 456 | SAE/TP 2010-01-1848-2010 | 2010-09-28 | English | Adaptive Automated Assembly of Wing System Components |
| 457 | SAE/TP 2010-01-1847-2010 | 2010-09-28 | English | Standard Test Protocol for Large Volume Robot Applications |
| 458 | SAE/TP 2010-01-1831-2010 | 2010-09-28 | English | Verification of Fastener Modeling Techniques for Joining Composite and Metallic Assemblies |
| 459 | SAE/TP 2010-01-1846-2010 | 2010-09-28 | English | Expanding the Use of Robotics in Airframe Assembly Via Accurate Robot Technology |
| 460 | SAE/TP 2010-01-1845-2010 | 2010-09-28 | English | Removal of Ergo-Tech Blind Bolt with Hand Electrical Discharge Removal Tool |
| 461 | SAE/TP 2010-01-1844-2010 | 2010-09-28 | English | Refurbishment of 767 ASAT Drill-Rivet-Lockbolt Machines |
| 462 | SAE/TP 2010-01-1843-2010 | 2010-09-28 | English | Simulation of the Solid Rivet Installation Process |
| 463 | SAE/TP 2010-01-1842-2010 | 2010-09-28 | English | Automatically Feeding and Installing Single Side Slave Fasteners |
| 464 | SAE/TP 2010-01-1838-2010 | 2010-09-28 | English | Solution for Automated Drilling in Composite Structures with a Standard Articulating Robot System |
| 465 | SAE/TP 2010-01-1836-2010 | 2010-09-28 | English | Applied Accurate Robotic Drilling for Aircraft Fuselage |
| 466 | SAE/TP 2010-01-1833-2010 | 2010-09-28 | English | A Fastener Analysis Addressing Various Types of Misfit and an Innovative Simple Design Solution |
| 467 | SAE/TP 2010-01-1879-2010 | 2010-09-28 | English | Automatic Feeding of Temporary Fasteners in Confined Spaces |
| 468 | SAE/TP 2010-01-1878-2010 | 2010-09-28 | English | An Experimental Strategy for the Manufacture of Aviation Fuel |
| 469 | SAE/TP 2010-01-1832-2010 | 2010-09-28 | English | Joint Stiffness Optimization Techniques |
| 470 | SAE/TP 2010-01-1872-2010 | 2010-09-28 | English | Force Feedback for Assembly of Aircraft Structures |
| 471 | SAE/TP 2010-01-1873-2010 | 2010-09-28 | English | Modular and Configurable Steel Structure for Assembly Fixtures |
| 472 | SAE/TP 2010-01-1877-2010 | 2010-09-28 | English | Production Implementation of Multiple Machine, High Speed Fiber Placement for Large Structures |
| 473 | SAE/TP 2010-01-1871-2010 | 2010-09-28 | English | Flexapods - Flexible Tooling at SAAB for Building the NEURON Aircraft |
| 474 | SAE/TP 2010-01-1870-2010 | 2010-09-28 | English | Vision System Non Contact Measurement of Pintail Type Fasteners |
| 475 | SAE/TP 2010-01-1869-2010 | 2010-09-28 | English | Direct Drive Friction Welding: A Comprehensive Mathematical Model |
| 476 | SAE/TP 2010-01-1868-2010 | 2010-09-28 | English | Tool Wear and Hole Quality in Drilling of Composite/Titanium Stacks with Carbide and PCD Tools |
| 477 | SAE/TP 2010-01-1867-2010 | 2010-09-28 | English | Drilling Mixed Stack Materials for the BOEING 787 |
| 478 | SAE/TP 2010-01-1864-2010 | 2010-09-28 | English | The Use of 3D Laser Scanners in Statistical Process Control |
| 479 | SAE J1979-2010 | 2010-09-01 | English | (R) E/E Diagnostic Test Modes |
| 480 | SAE J1373-2010 | 2010-09-01 | English | Rear Cornering Lamps for Use on Motor Vehicles Less than 9.1 m in Overall Length |
| 481 | SAE J2517-2010 | 2010-09-01 | English | Hybrid III Family Chest Potentiometer Calibration Procedure |
| 482 | SAE AS39029/50A-2010 | 2010-09-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-83733 CONNECTOR)
DoD Adopted |
| 483 | SAE J1052-2010 | 2010-09-01 | English | Motor Vehicle Driver and Passenger Head Position |
| 484 | SAE J2807-2010 | 2010-09-01 | English | Performance Requirements for Determining Tow-Vehicle Gross Combination Weight Rating and Trailer Weight Rating |
| 485 | SAE J1979-DA-2010 | 2010-09-01 | English | J1979-DA, Digital Annex of E/E Diagnostic Test Modes |
| 486 | SAE AS81819/1A-2010 | 2010-09-01 | English | (R) BEARINGS, PLAIN, SELF-LUBRICATING SELF-ALIGNING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F
DoD Adopted |
| 487 | SAE J2517-2010 | 2010-09-01 | English | Hybrid III Family Chest Potentiometer Calibration Procedure |
| 488 | SAE AS39029/51A-2010 | 2010-09-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED (FOR MIL-DTL-83733 CONNECTOR)
DoD Adopted |
| 489 | SAE AS81819A-2010 | 2010-09-01 | English | (R) Bearings, Plain, Self-Aligning, Self-Lubricating, High Speed Oscillation -65 to +160 Degrees F General Specification For
DoD Adopted |
| 490 | SAE J1239-2010 | 2010-09-01 | English | Four-, Five-, and Eight-Conductor Electrical Connectors for Automotive Type Trailers |
| 491 | SAE J2841-2010 | 2010-09-01 | English | (R) Utility Factor Definitions for Plug-In Hybrid Electric Vehicles Using Travel Survey Data |
| 492 | SAE AS31551A-2010 | 2010-09-01 | English | CONNECTOR, ELECTRIC, REAR ACCESSORY DESIGN STANDARD
DoD Adopted |
| 493 | SAE AMS1431C-2010 | 2010-09-01 | English | (R) Compound, Solid Runway and Taxiway Deicing/Anti-Icing
DoD Adopted |
| 494 | SAE AS39029/9B-2010 | 2010-09-01 | English | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, THERMOCOUPLE, (FOR MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, MIL-DTL-83723 SERIES I AND III, AND MIL-DTL-83733 CONNECTORS)
DoD Adopted |
| 495 | SAE AS81306/1-2010 | 2010-09-01 | English | BAND INSTALLATION TOOL, HAND, ONE-STEP, FOR AS85049/128 CONNECTOR ACCESSORY CABLE SHIELD TERMINATING BANDS |
| 496 | SAE AS8049/1-2010 | 2010-09-01 | English | Performance Standards for Single-Occupant, Side-Facing Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft |
| 497 | SAE J2358-2010 | 2010-09-01 | English | (R) Low Speed Vehicles |
| 498 | SAE AMS1435B-2010 | 2010-09-01 | English | (R) Fluid, Generic, Deicing/Anti-Icing Runways and Taxiways
DoD Adopted |
| 499 | SAE J2236-2010 | 2010-09-01 | English | Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers |
| 500 | SAE AS81306/1A-2010 | 2010-09-01 | English | BAND INSTALLATION TOOL, HAND, ONE-STEP, FOR AS85049/128 CONNECTOR ACCESSORY CABLE SHIELD TERMINATING BANDS(DoD Adopted) |
|