| Pos | standard Number | publication date | Language | Description |
| 1 | SAE AS25472A-2014 | 2014-08-01(S 2014) | English | GAGE, IN-SERVICE-INSPECTION, FOR USE WITH MS25442 CRIMPING DIES (FOR USE WITH ALUMINUM WIRE TERMINALS) |
| 2 | SAE AS29600/2A-2014 | 2014-08-01(S 2014) | English | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS, BACKSHELL, SHIELD TERMINATING, (SERIES A AND B) (Stabilized Type)(DoD Adopted) |
| 3 | SAE AS25439B-2014 | 2014-08-01(S 2014) | English | SPLICE-PERMANENT CRIMP STYLE, 2 WAY TYPE FOR ALUMINUM AIRCRAFT WIRE, CLASS 1 |
| 4 | SAE AS150401 THRU AS150425B-2014 | 2014-08-01(S 2014) | English | NUT-HEX, CHECK, UNS G87400(DoD Adopted) |
| 5 | SAE J2556-2014 | 2014-08-01(S 2014) | English | Radiated Emissions (RE) Narrowband Data Analysis - Power Spectral Density (PSD) |
| 6 | SAE AS25442A-2014 | 2014-08-01(S 2014) | English | DIES, FOR MS25441, HYDRAULIC CRIMPING, TOOL (FOR USE WITH ALUMINUM WIRE TERMINALS) |
| 7 | SAE AS121851 THRU AS121925B-2014 | 2014-08-01(S 2014) | English | PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .500 NOM(DoD Adopted) |
| 8 | SAE AS25281B-2014 | 2014-08-01(S 2014) | English | CLAMP, LOOP, PLASTIC, WIRE SUPPORT(DoD Adopted) |
| 9 | SAE J109-2014 | 2014-08-01(S 2014) | English | Service Brake System Performance Requirements - Motorcycles and Motor-Driven Cycles |
| 10 | SAE J184-2014 | 2014-08-01(S 2014) | English | Qualifying A Sound Data Acquisition System(DoD Adopted) |
| 11 | SAE AS150501 THRU AS150800C-2014 | 2014-08-01(S 2014) | English | STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A(DoD Adopted) |
| 12 | SAE MA3289C-2014 | 2014-08-01(S 2014) | English | BOLT, MACHINE-HEX HEAD-PD SHANK MJ THREAD, AMS6322, CADMIUM PLATE, METRIC(DoD Adopted) |
| 13 | SAE AS9307C-2014 | 2014-08-01(S 2014) | English | STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3750-24 UNF-3A(DoD Adopted) |
| 14 | SAE AS153201 THRU AS153500B-2014 | 2014-08-01(S 2014) | English | STUD, STEPPED, DRILLD 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3750-16 UNS X .3125-24 UNF-3A(DoD Adopted) |
| 15 | SAE AS131B-2014 | 2014-08-01(S 2014) | English | PADS, OIL INLET AND OUTLET, TYPES I, II & III - FOR AIRPLANE CONNECTIONS AIRCRAFT ENGINES |
| 16 | SAE AS194B-2014 | 2014-08-01(S 2014) | English | Nomenclature - Engine Cooling Fan |
| 17 | SAE AS9305C-2014 | 2014-08-01(S 2014) | English | STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .2500-28 UNF-3A(DoD Adopted) |
| 18 | SAE AS9304C-2014 | 2014-08-01(S 2014) | English | STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G887400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .2500-28 UNF-3A(DoD Adopted) |
| 19 | SAE MA3339C-2014 | 2014-08-01(S 2014) | English | BOLT, MACHINE - SPLINE EXTENDED WASHER, PD SHANK, LONG THREAD, AMS6322, CADMIUM PLATED, METRIC(DoD Adopted) |
| 20 | SAE MA3354C-2014 | 2014-08-01(S 2014) | English | NUT, PLAIN HEX - THIN, UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC(DoD Adopted) |
| 21 | SAE MA3367C-2014 | 2014-08-01(S 2014) | English | BOLT, MACHINE - SPLINE DRIVE HEAD, DRILLED, PD SHANK - LONG THREAD AMS6322, CADMIUM PLATED, METRIC |
| 22 | SAE AS23003A-2014 | 2014-08-01(S 2014) | English | GAGES - INSPECTION FOR MS23002 CRIMPING DIES (FOR USE WITH MS25036 INSULATED TERMINALS)(DoD Adopted) |
| 23 | SAE AS23190/2A-2014 | 2014-08-01(S 2014) | English | STRAPS, CLAMPS, PLASTIC AND METAL, AND MOUNTING HARDWARE, PLASTIC FOR CABLE HARNESS TYING AND SUPPORT CLAMP, LOOP, METAL, CUSHIONED, ADJUSTABLE, WIRE SUPPORT, TYPE V, CLASS 1(DoD Adopted) |
| 24 | SAE AS340A-2014 | 2014-08-01(S 2014) | English | Cover - Shipping Container Inspection Port |
| 25 | SAE AS150801 THRU AS151100C-2014 | 2014-08-01(S 2014) | English | STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A(DoD Adopted) |
| 26 | SAE AS9303C-2014 | 2014-08-01(S 2014) | English | STUD, SHOULDERED, HEXAGON WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A(DoD Adopted) |
| 27 | SAE AS13572A-2014 | 2014-08-01(S 2014) | English | Springs, Helical, Compression and Extension(DoD Adopted) |
| 28 | SAE AS151401 THRU AS151700B-2014 | 2014-08-01(S 2014) | English | STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3A(DoD Adopted) |
| 29 | SAE AS152601 THRU AS152900B-2014 | 2014-08-01(S 2014) | English | STUD, STEPPED, DRILLED 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .2500-20 UNS X .1900-32 UNF-3A(DoD Adopted) |
| 30 | SAE AS9306C-2014 | 2014-08-01(S 2014) | English | STUD, SHOULDERED, STEPPED, HEX, WRENCHING, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN, .2500-28 UNF-3A X .3125-24 UNF-3A(DoD Adopted) |
| 31 | SAE AS9944B-2014 | 2014-08-01(S 2014) | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, FULL SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A(DoD Adopted) |
| 32 | SAE MA3302C-2014 | 2014-08-01(S 2014) | English | NUT, PLAIN HEX - UNS G87400, CADMIUM PLATE, MJ THREAD, METRIC(DoD Adopted) |
| 33 | SAE J2795-2014 | 2014-08-01 | English | Power Cylinder Oil Consumption: Problem Solving |
| 34 | SAE J3067-2014 | 2014-08-01 | English | Candidate Improvements to Dedicated Short Range Communications (DSRC) Message Set Dictionary [SAE J2735] Using Systems Engineering Methods |
| 35 | SAE AS3108A-2014 | 2014-08-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66826), .2500-28 UNJF-3A |
| 36 | SAE AIR1329C-2014 | 2014-08-01 | English | (R) Electrical Connectors and Wiring, Compatibility of |
| 37 | SAE J3026-2014 | 2014-08-01 | English | Ambulance Patient Compartment Seating Integrity and Occupant Restraint |
| 38 | SAE J3024-2014 | 2014-08-01 | English | Product Safety Signs for Ready Mixed Concrete Trucks |
| 39 | SAE AS7251C-2014 | 2014-08-01 | English | Nuts, Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal 1200 °F Use, UNJ Thread Form(DoD Adopted) |
| 40 | SAE J2221-2014 | 2014-08-01 | English | (R) Standardized Symbols for Electrical Circuit Diagrams |
| 41 | SAE AS7351A-2014 | 2014-08-01 | English | (R) CLAMP, LOOP TYPE BONDING(DoD Adopted) |
| 42 | SAE AS5768/2B-2014 | 2014-08-01 | English | TOOL, STRIPPER, MANUALLY ACTUATED, SMALL GRIP, ELECTRICAL INSULATION, ROUND WIRE, SIZE 16 TO 30(DoD Adopted) |
| 43 | SAE AS6173/1-2014 | 2014-08-01 | English | CUTTING TOOL (MINIATURE) ELECTRICAL, WIRE CUTTING, HAND ACTUATED, TYPE I, WIRE SIZES 26 THROUGH 16 |
| 44 | SAE AMS6427M-2014 | 2014-08-01 | English | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) - UNS K23080(DoD Adopted) |
| 45 | SAE AS95234-2014 | 2014-08-01 | English | Connectors, Electrical, Reverse Bayonet, General Specification For |
| 46 | SAE AMS6382P-2014 | 2014-08-01 | English | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed - UNS G41400(DoD Adopted) |
| 47 | SAE AMS6378G-2014 | 2014-08-01 | English | Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining - UNS K11542(DoD Adopted) |
| 48 | SAE AS6462A-2014 | 2014-08-01 | English | (R) AS5553A, Fraudulent/Counterfeit Electronic Parts; Avoidance, Detection, Mitigation, and Disposition Verification Criteria(DoD Adopted) |
| 49 | SAE J2798-2014 | 2014-08-01 | English | Power Cylinder Blow-by: Problem Solving |
| 50 | SAE J2797-2014 | 2014-08-01 | English | (R) Power Cylinder Blow-By: Blow-By Mechanisms |
| 51 | SAE AMS6324J-2014 | 2014-08-01 | English | Steel Bars, Forgings, and Tubing 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (8740 Modified) - UNS K11640(DoD Adopted) |
| 52 | SAE AS6496-2014 | 2014-08-01 | English | Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition - Authorized/Franchised Distribution |
| 53 | SAE J1222-2014 | 2014-08-01 | English | Speed Control Assurance for Snowmobiles |
| 54 | SAE AS81824/14A-2014 | 2014-08-01 | English | SPLICE, ELECTRIC, PERMANENT, CRIMP STYLE, NICKEL-COATED COPPER, INSULATED, ENVIRONMENT RESISTANT, CLASS 1, 175 °C, HEATLESS SEALING(DoD Adopted) |
| 55 | SAE AMS6264L-2014 | 2014-08-01 | English | Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (9317) - UNS K44414(DoD Adopted) |
| 56 | SAE J2221-2014 | 2014-08-01 | English | (R) Standardized Symbols for Electrical Circuit Diagrams |
| 57 | SAE AMS6292J-2014 | 2014-08-01 | English | Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617) - UNS G46170(DoD Adopted) |
| 58 | SAE AIR1329C-2014 | 2014-08-01 | English | (R) Electrical Connectors and Wiring, Compatibility of |
| 59 | SAE AIR6056-2014 | 2014-08-01 | English | Gas Turbine Engine Lubricant Specifications: Current Technical Review and Future Direction |
| 60 | SAE J2578-2014 | 2014-08-01 | English | Recommended Practice for General Fuel Cell Vehicle Safety |
| 61 | SAE ARP5614-2014 | 2014-08-01 | English | Guidelines for Harness Critical Clamp Locator Marker Installation on Electrical Cable Assemblies |
| 62 | SAE AS5238B-2014 | 2014-08-01 | English | FITTING, ADAPTER, FLARELESS TO FLARED |
| 63 | SAE AS5232B-2014 | 2014-08-01 | English | FITTING, ADAPTER, REDUCER, PORT TO FLARELESS |
| 64 | SAE AS5231B-2014 | 2014-08-01 | English | FITTING, PLUG, TUBE END, FLARELESS |
| 65 | SAE J914-2014 | 2014-08-01 | English | Side Turn Signal Lamps for Vehicles Less than 12 m in Length |
| 66 | SAE J1979-2014 | 2014-08-01 | English | (R) E/E Diagnostic Test Modes |
| 67 | SAE AS7452B-2014 | 2014-08-01 | English | Bolts and Screws, Steel, Low Alloy Heat Treated, Roll Threaded(DoD Adopted) |
| 68 | SAE J2867-2014 | 2014-08-01 | English | Laboratory Testing of Light Duty Vehicle Electric Cooling Fan Assemblies for Airflow Performance |
| 69 | SAE J2578-2014 | 2014-08-01 | English | Recommended Practice for General Fuel Cell Vehicle Safety |
| 70 | SAE AS3483B-2014 | 2014-08-01 | English | (R) NUT, SELF LOCKING, HEXAGON, REGULAR HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F(DoD Adopted) |
| 71 | SAE AS3482D-2014 | 2014-08-01 | English | (R) NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F(DoD Adopted) |
| 72 | SAE AS3481F-2014 | 2014-08-01 | English | (R) NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F(DoD Adopted) |
| 73 | SAE AS7466E-2014 | 2014-08-01 | English | Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi, Fatigue Rated, Procurement Specification(DoD Adopted) |
| 74 | SAE AS3156A-2014 | 2014-08-01 | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .190-32 UNJF-3A |
| 75 | SAE AS9678B-2014 | 2014-08-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A(DoD Adopted) |
| 76 | SAE AS3157A-2014 | 2014-08-01 | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .250-28 UNJF-3A |
| 77 | SAE AS3158A-2014 | 2014-08-01 | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, CLOSE TOLERANCE SHANK, AMS4967, .3125-24 UNJF-3A |
| 78 | SAE J1704-2014 | 2014-08-01 | English | Motor Vehicle Brake Fluid Based Upon Glycols, Glycol Ethers and the Corresponding Borates |
| 79 | SAE J1703-2014 | 2014-08-01 | English | Motor Vehicle Brake Fluid(DoD Adopted) |
| 80 | SAE AS9556D-2014 | 2014-08-01 | English | (R) BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A(DoD Adopted) |
| 81 | SAE AS9679B-2014 | 2014-08-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .3750-24 UNJF-3A(DoD Adopted) |
| 82 | SAE AS5242B-2014 | 2014-08-01 | English | FITTING, ELBOW, 45°, BULKHEAD, FLARELESS TO FLARED |
| 83 | SAE AS5240B-2014 | 2014-08-01 | English | FITTING, ELBOW, 90°, BULKHEAD, FLARELESS TO FLARED |
| 84 | SAE AS5241B-2014 | 2014-08-01 | English | FITTING, ELBOW, 90°, BULKHEAD, FLARED TO FLARELESS |
| 85 | SAE AS9759A-2014 | 2014-08-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, AMS4967 (TI 6AL-4V), .1900-32 UNJF-3A(DoD Adopted) |
| 86 | SAE AS5239B-2014 | 2014-08-01 | English | FITTING, ADAPTER, BULKHEAD, FLARELESS TO FLARED |
| 87 | SAE AS3226A-2014 | 2014-08-01 | English | FITTING, TEE, BULKHEAD ON RUN, FLARED CORROSION AND HEAT RESISTANT STEEL - UNS S34700 |
| 88 | SAE AS121601 THRU AS121650B-2014 | 2014-07-01(S 2014) | English | PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .125 NOM(DoD Adopted) |
| 89 | SAE AS116101 THRU AS116150B-2014 | 2014-07-01(S 2014) | English | SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-24 UNF-3A(DoD Adopted) |
| 90 | SAE AS116051 THRU AS116100B-2014 | 2014-07-01(S 2014) | English | SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3750-16 UNC-3A(DoD Adopted) |
| 91 | SAE AS116001 THRU AS116050B-2014 | 2014-07-01(S 2014) | English | SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-24 UNF-3A(DoD Adopted) |
| 92 | SAE AS115951 THRU AS116000C-2014 | 2014-07-01(S 2014) | English | SCREW - FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .3125-18 UNC-3A(DoD Adopted) |
| 93 | SAE AS115601 THRU AS115650B-2014 | 2014-07-01(S 2014) | English | SCREW - FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .1900-32 UNF-3A(DoD Adopted) |
| 94 | SAE AS121751 THRU AS121800B-2014 | 2014-07-01(S 2014) | English | PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .312 NOM(DoD Adopted) |
| 95 | SAE AS122026 THRU AS122075B-2014 | 2014-07-01(S 2014) | English | WASHER - LOCK, SPRING, CADMIUM PLATED(DoD Adopted) |
| 96 | SAE AS123020 THRU AS123119A-2014 | 2014-07-01(S 2014) | English | GASKET - ALUMINUM - NON ASBESTOS, ANNULAR(DoD Adopted) |
| 97 | SAE AS125851 THRU AS125875C-2014 | 2014-07-01(S 2014) | English | PLUG - PIPE, CADMIUM PLATED, STEEL UNS G87400, COUNTERSUNK HEX |
| 98 | SAE J2382-2014 | 2014-07-01(S 2014) | English | Video Based Light Measurement Techniques |
| 99 | SAE AS150301 THRU AS150400A-2014 | 2014-07-01(S 2014) | English | PIN-LOCK, BRASS(DoD Adopted) |
| 100 | SAE AMS4012G-2014 | 2014-07-01(S 2014) | English | Aluminum Sheet, Laminated Edge Bonded(DoD Adopted) |
| 101 | SAE AIR4362A-2014 | 2014-07-01(S 2014) | English | NBC Protection Considerations for ECS Design |
| 102 | SAE AS121701 THRU AS121750B-2014 | 2014-07-01(S 2014) | English | PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .250 NOM(DoD Adopted) |
| 103 | SAE AS121651 THRU AS121700B-2014 | 2014-07-01(S 2014) | English | PIN, STRAIGHT, HEADED, CADMIUM PLATED, UNS G87400, .187 NOM(DoD Adopted) |
| 104 | SAE AIR1551B-2014 | 2014-07-01(S 2014) | English | Torque Tightening Metric Screw Threaded Fasteners |
| 105 | SAE AS100016 THRU AS100025A-2014 | 2014-07-01(S 2014) | English | LOCKWIRE, BRASS |
| 106 | SAE AMS-QQ-A-225/9A-2014 | 2014-07-01(S 2014) | English | Aluminum Alloy 7075, Bar, Rod, Wire, and Special Shapes; Rolled, Drawn, or Cold Finished - UNS A97075(DoD Adopted) |
| 107 | SAE AIR822C-2014 | 2014-07-01(S 2014) | English | Oxygen Systems for General Aviation |
| 108 | SAE AS1159C-2014 | 2014-07-01(S 2014) | English | Wrenching Configuration, 12 Lobed, For Threaded Fasteners |
| 109 | SAE AS1188A-2014 | 2014-07-01(S 2014) | English | Aircraft Tire Inflation-Deflation Equipment |
| 110 | SAE AS28914C-2014 | 2014-07-01 | English | BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW, AIRFRAME, ANTI-FRICTION, SEALED, TYPE III |
| 111 | SAE AS95234/12-2014 | 2014-07-01 | English | CONNECTOR RECEPTACLE, REVERSE BAYONET COUPLING, DUMMY STOWAGE |
| 112 | SAE AS95234/11-2014 | 2014-07-01 | English | AEROSPACE STANDARD PROTECTIVE COVER, CONNECTOR RECEPTACLE, REVERSE BAYONET COUPLING |
| 113 | SAE AS9796A-2014 | 2014-07-01 | English | BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES (UNS S17400), .3125-24 UNJF-3A(DoD Adopted) |
| 114 | SAE AS83519/5-2014 | 2014-07-01 | English | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PREINSTALLED BRAID, NI PLATED, CLASS I, ROHS |
| 115 | SAE AS39029/112D-2014 | 2014-07-01 | English | (R) CONTACT BUSHING, ELECTRICAL CONNECTOR CONTACT, WIRE BARREL |
| 116 | SAE AS9676B-2014 | 2014-07-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A |
| 117 | SAE ARP5088B-2014 | 2014-07-01 | English | (R) Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration |
| 118 | SAE AS39029/69B-2014 | 2014-07-01 | English | (R) CONTACT, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, FOR AS85028 CONNECTORS |
| 119 | SAE AMS4201F-2014 | 2014-07-01 | English | Aluminum Alloy Plate 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved, and Overaged - UNS A97050(DoD Adopted) |
| 120 | SAE AS4156C-2014 | 2014-07-01 | English | (R) Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification |
| 121 | SAE AMS4989C-2014 | 2014-07-01 | English | Titanium Alloy Sheet, Strip, and Plate 3Al - 2.5V Annealed - UNS R56320 |
| 122 | SAE AIR5372A-2014 | 2014-07-01 | English | (R) Information on Brake-By-Wire (BBW) Brake Control Systems |
| 123 | SAE AMS6272M-2014 | 2014-07-01 | English | Steel Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617) - UNS G86170 |
| 124 | SAE AS6091-2014 | 2014-07-01 | English | JAUS Unmanned Ground Vehicle Service Set |
| 125 | SAE AMS-C-7438A-2014 | 2014-07-01 | English | Core Material, Aluminum, for Sandwich Construction(DoD Adopted) |
| 126 | SAE AIR6291-2014 | 2014-07-01 | English | Guidelines for Repair Process Evaluation of Aluminum Bonded Structure |
| 127 | SAE ARP6275-2014 | 2014-07-01 | English | Determination of Cost Benefits from Implementing an Integrated Vehicle Health Management System |
| 128 | SAE J139-2014 | 2014-07-01 | English | Ignition System Nomenclature and Terminology |
| 129 | SAE AS81820/3D-2014 | 2014-07-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, WIDE, GROOVED RACE, -65 TO +325 °F(DoD Adopted) |
| 130 | SAE AS81820/2D-2014 | 2014-07-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO +325 °F(DoD Adopted) |
| 131 | SAE AS3319E-2014 | 2014-07-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .190-24UNJC X .190-32UNJF(DoD Adopted) |
| 132 | SAE AS81820/1D-2014 | 2014-07-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 DEGREES F(DoD Adopted) |
| 133 | SAE AS25361B-2014 | 2014-07-01 | English | (R) CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, PUSH-PULL, 50 THRU 100 AMP, TYPE I(DoD Adopted) |
| 134 | SAE AS81714/17A-2014 | 2014-07-01 | English | (R) TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 22D, SERIES I(DoD Adopted) |
| 135 | SAE J1628-2014 | 2014-07-01 | English | Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems |
| 136 | SAE AS5528B-2014 | 2014-07-01 | English | (R) Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting |
| 137 | SAE AS3322E-2014 | 2014-07-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .375-16UNJC X .375-24UNJF(DoD Adopted) |
| 138 | SAE AS3321E-2014 | 2014-07-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS5731 .3125-18UNJC X .3125-24UNJF(DoD Adopted) |
| 139 | SAE J2475-2014 | 2014-07-01 | English | (R) Wheel End Assembly and Axle Spindle Interface Dimensions - Truck and Bus |
| 140 | SAE AS39029/69B-2014 | 2014-07-01 | English | (R) CONTACT, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, FOR AS85028 CONNECTORS(DoD Adopted) |
| 141 | SAE AS9676B-2014 | 2014-07-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CUP WASHER LOCKED, CRES, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A(DoD Adopted) |
| 142 | SAE AS39029/70B-2014 | 2014-07-01 | English | (R) CONTACT, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, FOR AS85028 CONNECTORS(DoD Adopted) |
| 143 | SAE AS27197B-2014 | 2014-07-01 | English | (R) SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268(DoD Adopted) |
| 144 | SAE AS5975B-2014 | 2014-07-01 | English | (R) FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 145 | SAE AS28914C-2014 | 2014-07-01 | English | (R) BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW AIRFRAME, ANTI-FRICTION, SEALED, TYPE III(DoD Adopted) |
| 146 | SAE AS81820D-2014 | 2014-07-01 | English | Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation(DoD Adopted) |
| 147 | SAE AS3320E-2014 | 2014-07-01 | English | STUD - STRAIGHT, RING LOCKED, CRES AMS 5731 .250-20UNJC X .250-28UNJF(DoD Adopted) |
| 148 | SAE AMS4089E-2014 | 2014-07-01 | English | Aluminum Alloy, Plate 1.6Cu - 2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated - UNS A97475(DoD Adopted) |
| 149 | SAE AIR5372A-2014 | 2014-07-01 | English | (R) Information on Brake-By-Wire (BBW) Brake Control Systems |
| 150 | SAE AS81820/4D-2014 | 2014-07-01 | English | BEARING, PLAIN, SELF-ALIGNING, SELFLUBRICATING, LINED BORE, LOW SPEED, NARROW, CHAMFERED RACE, -65 TO +325 °F(DoD Adopted) |
| 151 | SAE AS28913C-2014 | 2014-07-01 | English | BEARING, ROLLER, SELF-ALIGNING, DOUBLE ROW, AIRFRAME, ANTI-FRICTION, SEALED, TYPE II(DoD Adopted) |
| 152 | SAE AS6091-2014 | 2014-07-01 | English | JAUS Unmanned Ground Vehicle Service Set |
| 153 | SAE AS95234/11-2014 | 2014-07-01 | English | AEROSPACE STANDARD PROTECTIVE COVER, CONNECTOR RECEPTACLE, REVERSE BAYONET COUPLING |
| 154 | SAE AS3111A-2014 | 2014-07-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731(UNS S66826), .4375-20 UNJF-3A |
| 155 | SAE AS95234/12-2014 | 2014-07-01 | English | CONNECTOR RECEPTACLE, REVERSE BAYONET COUPLING, DUMMY STOWAGE |
| 156 | SAE AS1946D-2014 | 2014-07-01 | English | Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450 °F, Hydraulic and Pneumatic(DoD Adopted) |
| 157 | SAE ARP4940-2014 | 2014-07-01 | English | Application Guide for Aerospace Hydraulic Motors |
| 158 | SAE AMS6519D-2014 | 2014-07-01 | English | Steel, Maraging, Bars, Forgings, Tubing, and Rings 19Ni - 3.0Mo - 1.4Ti - 0.10Al Premium Aircraft Quality Double Vacuum Melted, Annealed - UNS K92150(DoD Adopted) |
| 159 | SAE AMS5400C-2014 | 2014-07-01 | English | Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength - UNS J92110(DoD Adopted) |
| 160 | SAE J277-2014 | 2014-07-01 | English | Maintenance of Design Voltage - Snowmobile Electrical Systems |
| 161 | SAE J3043-2014 | 2014-07-01 | English | Ambulance Equipment Mount Device or Systems |
| 162 | SAE J3027-2014 | 2014-07-01 | English | Ambulance Litter Integrity, Retention, and Patient Restraint |
| 163 | SAE AS4137C-2014 | 2014-07-01 | English | FITTING ASSY, ELBOW, REDUCER, 45°, SWIVEL, REDUCED BODY, FLARELESS |
| 164 | SAE AS4138C-2014 | 2014-07-01 | English | FITTING ASSY, ELBOW, REDUCER, 90 Degrees, SWIVEL, REDUCED BODY, FLARELESS |
| 165 | SAE AS4139C-2014 | 2014-07-01 | English | FITTING ASSY, TEE, REDUCER, SWIVEL ON RUN, REDUCED BODY, FLARELESS |
| 166 | SAE AS4140C-2014 | 2014-07-01 | English | FITTING ASSY, TEE, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS |
| 167 | SAE AS4141C-2014 | 2014-07-01 | English | FITTING ASSY,CROSS, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS |
| 168 | SAE AS4156C-2014 | 2014-07-01 | English | (R) Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification |
| 169 | SAE AS6106A-2014 | 2014-07-01 | English | FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI |
| 170 | SAE AS6107A-2014 | 2014-07-01 | English | FITTING ASSEMBLY, STRAIGHT, EXTENDED BULKHEAD SHANK, FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI |
| 171 | SAE AS6174A-2014 | 2014-07-01 | English | Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming Materiel(DoD Adopted) |
| 172 | SAE J2601-2014 | 2014-07-01 | English | Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles |
| 173 | SAE AS83519/3-2014 | 2014-07-01 | English | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PREINSTALLED BRAID,TIN PLATED, CLASS I, NON-ROHS |
| 174 | SAE AS9968-2014 | 2014-07-01 | English | Laboratory Viscosity Measurement of Thickened Aircraft Deicing/Anti-icing Fluids with the Brookfield LV Viscometer |
| 175 | SAE AS81969/34-2014 | 2014-07-01 | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION A (FOR MIL-DTL-28840 CONNECTORS) |
| 176 | SAE AS81969/33-2014 | 2014-07-01 | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I, CLASS 1, COMPOSITION A |
| 177 | SAE AS39029/112D-2014 | 2014-07-01 | English | (R) CONTACT BUSHING, ELECTRICAL CONNECTOR CONTACT, WIRE BARREL(DoD Adopted) |
| 178 | SAE AMS-H-81200D-2014 | 2014-07-01 | English | Heat Treatment of Titanium and Titanium Alloys(DoD Adopted) |
| 179 | SAE AMS6472F-2014 | 2014-07-01 | English | Steel, Bars and Forgings, Nitriding 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) (135 Mod) Hardened and Tempered, 112 ksi (772 MPa) Tensile Strength - UNS K24065 |
| 180 | SAE AMS6471H-2014 | 2014-07-01 | English | Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) Consumable Electrode Vacuum Melted - UNS K24065 |
| 181 | SAE AMS6470N-2014 | 2014-07-01 | English | Steel, Nitriding, Bars, Forgings, and Tubing 1.6Cr - 0.35Mo - 1.13Al (0.38 - 0.43C) (135 Mod) - UNS K24065(DoD Adopted) |
| 182 | SAE AMS6429H-2014 | 2014-07-01 | English | Steel Bars, Forgings, Tubing, and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Consumable Electrode Vacuum Melted - UNS K33517(DoD Adopted) |
| 183 | SAE AMS6428K-2014 | 2014-07-01 | English | Steel, Bars, Forgings, and Tubing 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Mod) - UNS K33517(DoD Adopted) |
| 184 | SAE AMS6365K-2014 | 2014-07-01 | English | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved - UNS G41350(DoD Adopted) |
| 185 | SAE AMS6340B-2014 | 2014-07-01 | English | Steel Bars, Forgings, and Tubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Consumable Electrode Vacuum Remelted - UNS K23080 |
| 186 | SAE AMS5646P-2014 | 2014-07-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb(Nb) (347) Solution Heat Treated - UNS S34700(DoD Adopted) |
| 187 | SAE R-431-2014 | 2014-06-13 | English | Automotive Lightweighting Using Advanced High-Strength Steels - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 188 | SAE AS1304B-2014 | 2014-06-01(S 2014) | English | Continuous Flow Chemical Oxygen Generators |
| 189 | SAE J2337-1-2014 | 2014-06-01(S 2014) | English | Connections for Fluid Power and High Pressure Use-Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing-Part 1: Ports with Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods |
| 190 | SAE J1927-2014 | 2014-06-01(S 2014) | English | Cumulative Damage Analysis for Hydraulic Hose Assemblies (Stabilized Type) |
| 191 | SAE J671-2014 | 2014-06-01(S 2014) | English | Vibration Damping Materials and Underbody Coatings |
| 192 | SAE AS5625A-2014 | 2014-06-01(S 2014) | English | Minimum Performance Standards for Static Electric Power Frequency Converters (Stabilized Type) |
| 193 | SAE J1475-2014 | 2014-06-01(S 2014) | English | Hydraulic Hose Fitting for Marine Applications |
| 194 | SAE J501-2014 | 2014-06-01(S 2014) | English | Shaft Ends |
| 195 | SAE AS25337A-2014 | 2014-06-01(S 2014) | English | CIRCUIT BREAKER, AIRCRAFT TRIP-FREE TOGGLE, 5-50 AMP(DoD Adopted) |
| 196 | SAE AS22074A-2014 | 2014-06-01(S 2014) | English | CIRCUIT BREAKER, RECYCLING, TRIP-FREE, PUSH-PULL, 1/2 THRU 5 AMPERE, TYPE I(DoD Adopted) |
| 197 | SAE J2552-2014 | 2014-06-01(S 2014) | English | Push-On Hose and Mating Hose Fittings(DoD Adopted) |
| 198 | SAE J1773-2014 | 2014-06-01(S 2014) | English | SAE Electric Vehicle Inductively Coupled Charging (Stabilized Type) |
| 199 | SAE J499-2014 | 2014-06-01(S 2014) | English | Parallel Side Splines for Soft Broached Holes in Fittings |
| 200 | SAE J585-2014 | 2014-06-01 | English | Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less than 2032 mm in Overall Width(DoD Adopted) |
| 201 | SAE ARP8058-2014 | 2014-06-01 | English | Thermal Design and Performance of Airplane In-Flight Food Storage Carts |
| 202 | SAE J2880-2014 | 2014-06-01 | English | (R) Recommended Green Racing Protocols |
| 203 | SAE J2884-2014 | 2014-06-01 | English | Thermoset Elastomer Specification System |
| 204 | SAE AS27198B-2014 | 2014-06-01 | English | (R) SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988(DoD Adopted) |
| 205 | SAE AS6057A-2014 | 2014-06-01 | English | (R) JAUS Manipulator Service Set |
| 206 | SAE AMS2372G-2014 | 2014-06-01 | English | Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Forgings |
| 207 | SAE AS22520/3B-2014 | 2014-06-01 | English | CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION, INSPECTION GAGE FOR TYPE I AND II TOOLS(DoD Adopted) |
| 208 | SAE AS21923B-2014 | 2014-06-01 | English | (R) ADAPTER, FLARELESS TUBE, BULKHEAD AND UNIVERSAL TO FLARED TUBE(DoD Adopted) |
| 209 | SAE AMS5749F-2014 | 2014-06-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted - UNS S42700(DoD Adopted) |
| 210 | SAE AS9751A-2014 | 2014-06-01 | English | BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, AMS4967 (TI 6AL-4V) .2500-28 UNJF-3A(DoD Adopted) |
| 211 | SAE AS27196B-2014 | 2014-06-01 | English | GASKET, RUBBER, FLUID RESISTANT, OILS, SYNTHETIC OILS AND FUELS (-65 TO +400 °F), MOLD IN GROOVE(DoD Adopted) |
| 212 | SAE J1979-DA-2014 | 2014-06-01 | English | J1979-DA, Digital Annex of E/E Diagnostic Test Modes |
| 213 | SAE AS5901C-2014 | 2014-06-01 | English | (R) Water Spray and High Humidity Endurance Test Methods for SAE AMS1424 and SAE AMS1428 Aircraft Deicing/Anti-icing Fluids |
| 214 | SAE AS8091A-2014 | 2014-06-01 | English | (R) Aircraft Jacking Pads Adapters and Sockets Design and Installation of(DoD Adopted) |
| 215 | SAE J403-2014 | 2014-06-01 | English | Chemical Compositions of SAE Carbon Steels(DoD Adopted) |
| 216 | SAE AS7974/1A-2014 | 2014-06-01 | English | (R) CONNECTOR, PLUG, AIRCRAFT EXTERNAL POWER, 115/200 VOLT, 400 HERTZ (FOR A/E 24A-166A)(DoD Adopted) |
| 217 | SAE AMS5950C-2014 | 2014-06-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS N07719 |
| 218 | SAE ARP5265B-2014 | 2014-06-01 | English | (R) Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage |
| 219 | SAE AMS5886C-2014 | 2014-06-01 | English | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted 2100 °F (1149 °C) Solution Heat Treated - UNS N07263 |
| 220 | SAE AIR5914-2014 | 2014-06-01 | English | Landing Gear Fatigue Spectrum Development For Part 25 Aircraft |
| 221 | SAE AS8091A-2014 | 2014-06-01 | English | Aircraft Jacking Pads Adapters and Sockets, Design and Installation of |
| 222 | SAE AS6057A-2014 | 2014-06-01 | English | (R) JAUS Manipulator Service Set |
| 223 | SAE AS95234/10-2014 | 2014-06-01 | English | PROTECTIVE COVER, CONNECTOR PLUG, REVERSE BAYONET COUPLING |
| 224 | SAE AS31001B-2014 | 2014-06-01 | English | CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE |
| 225 | SAE ARP5265B-2014 | 2014-06-01 | English | (R) Minimum Operational and Maintenance Responsibilities for Aircraft Tire Usage |
| 226 | SAE AIR5914-2014 | 2014-06-01 | English | Landing Gear Fatigue Spectrum Development For Part 25 Aircraft |
| 227 | SAE AS24654A-2014 | 2014-06-01 | English | (R) ELBOW, TUBE - 45°, BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE(DoD Adopted) |
| 228 | SAE AS29606-2014 | 2014-06-01 | English | Wire, Electrical, Stranded, Uninsulated Copper, Copper Alloy, or Aluminum, or Thermocouple Extension, General Specification For(DoD Adopted) |
| 229 | SAE J1828-2014 | 2014-06-01 | English | Uniform Reference and Dimensional Guidelines for Collision Repair |
| 230 | SAE J2673-2014 | 2014-06-01 | English | Straight-Line Braking Test for Truck and Bus Tires |
| 231 | SAE AS25244B-2014 | 2014-06-01 | English | (R) CIRCUIT BREAKER, TRIP-FREE, PUSH-PULL, 5 THRU 50 AMP, TYPE I(DoD Adopted) |
| 232 | SAE AS24405A-2014 | 2014-06-01 | English | (R) ADAPTER, FLARELESS TUBE TO FLARED TUBE PRECISION TYPE(DoD Adopted) |
| 233 | SAE AS81935/3B-2014 | 2014-06-01 | English | LOCKING DEVICES (FOR ROD END BEARINGS)(DoD Adopted) |
| 234 | SAE J3044-2014 | 2014-06-01 | English | Occupant Restraint and Equipment Mounting Integrity - Rear Impact System-Level Ambulance Patient Compartment |
| 235 | SAE AS24652A-2014 | 2014-06-01 | English | (R) ELBOW, TUBE - 90°, BULKHEAD, FLARED TUBE UNIVERSAL TO FLARELESS TUBE(DoD Adopted) |
| 236 | SAE AMS4471A-2014 | 2014-06-01 | English | Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Investment Cast, Solution and Precipitation Heat Treated |
| 237 | SAE AMS6362G-2014 | 2014-06-01 | English | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength - UNS G41300(DoD Adopted) |
| 238 | SAE AS24651A-2014 | 2014-06-01 | English | (R) ELBOW, TUBE - 90°, BULKHEAD, FLARELESS TUBE UNIVERSAL TO FLARED TUBE(DoD Adopted) |
| 239 | SAE AS3078C-2014 | 2014-06-01 | English | FITTING, INSERT, FLUID CONNECTION, MS33649 BOSS TO RING LOCKED BOSS(DoD Adopted) |
| 240 | SAE AS95234/10-2014 | 2014-06-01 | English | PROTECTIVE COVER, CONNECTOR PLUG, REVERSE BAYONET COUPLING |
| 241 | SAE AMS5518M-2014 | 2014-06-01 | English | Steel, Corrosion Resistant, Sheet and Strip 18Cr - 8Ni Cold Rolled, 150 ksi (1034 MPa) Tensile Strength - UNS S30100(DoD Adopted) |
| 242 | SAE AS9104/2A-2014 | 2014-06-01 | English | (R) Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs - Word Format No Longer Available |
| 243 | SAE AMS5616M-2014 | 2014-06-01 | English | Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0W Annealed - UNS S41800(DoD Adopted) |
| 244 | SAE AMS6322P-2014 | 2014-06-01 | English | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) - UNS G87400(DoD Adopted) |
| 245 | SAE AS31001B-2014 | 2014-06-01 | English | CONNECTOR, RECEPTACLE, ELECTRIC, WALL MOUNTING, SOLDER CONTACTS, AN TYPE(DoD Adopted) |
| 246 | SAE AMS6361F-2014 | 2014-06-01 | English | Steel Tubing, Seamless 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength - UNS G41300(DoD Adopted) |
| 247 | SAE J1207-2014 | 2014-05-01(S 2014) | English | Measurement Procedure for Determination of Silencer Effectiveness in Reducing Engine Intake or Exhaust Sound Level |
| 248 | SAE AS115401 THRU AS115450B-2014 | 2014-05-01(S 2014) | English | SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .1900-32 UNF-3A(DoD Adopted) |
| 249 | SAE AMS-HH-G-101A-2014 | 2014-05-01(S 2014) | English | Gasket, Metallic-Encased(DoD Adopted) |
| 250 | SAE AS6370A-2014 | 2014-05-01(S 2014) | English | Wire, Electrical, Insulated, Antenna(DoD Adopted) |
| 251 | SAE J1512-2014 | 2014-05-01(S 2014) | English | Manual Slack Adjuster Performance Requirements |
| 252 | SAE AS115451 THRU AS115500C-2014 | 2014-05-01(S 2014) | English | ( R) SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .2500-28UNF-3A(DoD Adopted) |
| 253 | SAE AMS3348D-2014 | 2014-05-01(S 2014) | English | Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35(DoD Adopted) |
| 254 | SAE AS115901 THRU AS115950C-2014 | 2014-05-01(S 2014) | English | SCREW – FLAT FILLISTER, DRILLED HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN .2500-28 UNF – 3A (Stabilized Type)(DoD Adopted) |
| 255 | SAE AS4873A-2014 | 2014-05-01(S 2014) | English | Gland Design, Elastomeric O-Ring Seals, Static Radial and Face 800 psi Maximum Service |
| 256 | SAE AMS3349D-2014 | 2014-05-01(S 2014) | English | Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75(DoD Adopted) |
| 257 | SAE AMS3356F-2014 | 2014-05-01(S 2014) | English | Silicone (VMQ) Rubber Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65(DoD Adopted) |
| 258 | SAE AMS3306C-2014 | 2014-05-01(S 2014) | English | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65 |
| 259 | SAE J1247-2014 | 2014-05-01(S 2014) | English | Simulated Mountain-Brake Performance Test Procedure |
| 260 | SAE J57-2014 | 2014-05-01(S 2014) | English | Sound Level of Highway Truck Tires |
| 261 | SAE AMS3338G-2014 | 2014-05-01(S 2014) | English | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 75 - 85(DoD Adopted) |
| 262 | SAE AS115501 THRU AS115550B-2014 | 2014-05-01(S 2014) | English | SCREW – FLAT FILLISTER HEAD, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN. .3125-24 UNF-3A (Stabilized Type)(DoD Adopted) |
| 263 | SAE AMS7254B-2014 | 2014-05-01(S 2014) | English | Perfluoroether Elastomer |
| 264 | SAE AS115651 THRU AS115700B-2014 | 2014-05-01(S 2014) | English | SCREW - FLAT FILLISTER HEAD, DRILLED SHANK, CADMIUM PLATED, STEEL UNS G87400, 125 KSI MIN., .2500-28 UNF-3A (Stabilized Type)(DoD Adopted) |
| 265 | SAE AMS5669B-2014 | 2014-05-01(S 2014) | English | Alloy Bars, Corrosion and Heat Resistant Nickel Base - 15.5Cr - 0.95 (Cb + Ta) - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted |
| 266 | SAE AIR851C-2014 | 2014-05-01(S 2014) | English | O-Ring Tension Testing Calculations |
| 267 | SAE AMS3198L-2014 | 2014-05-01(S 2014) | English | Sponge, Chloroprene (CR) Rubber Medium Stiffness(DoD Adopted) |
| 268 | SAE AMS3250K-2014 | 2014-05-01(S 2014) | English | Synthetic Rubber and Cork Composition General Purpose Soft(DoD Adopted) |
| 269 | SAE AMS3199L-2014 | 2014-05-01(S 2014) | English | Sponge, Chloroprene (CR) Rubber Firm(DoD Adopted) |
| 270 | SAE AMS3195G-2014 | 2014-05-01 | English | Silicone Rubber Sponge Closed Cell, Medium(DoD Adopted) |
| 271 | SAE AIR6160-2014 | 2014-05-01 | English | Magnesium Alloys in Aircraft Seats - Developments in Magnesium Alloy Flammability Testing |
| 272 | SAE AS39029/93B-2014 | 2014-05-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-83527, CONNECTOR) |
| 273 | SAE ARP4260B-2014 | 2014-05-01 | English | Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays |
| 274 | SAE AIR1106B-2014 | 2014-05-01 | English | Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights |
| 275 | SAE J2754-2014 | 2014-05-01 | English | Volumetric Rating of Excavator Mounted, Bucket Linkage Operated Grapples |
| 276 | SAE AS34541B-2014 | 2014-05-01 | English | CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE |
| 277 | SAE AMS5940D-2014 | 2014-05-01 | English | Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 3.0Cb(Nb) - 5.5Al - 0.008B - 25.5Fe Multiple Melted, High Temperature, Oxidation-Resistant, Low Expansion Solution Heat Treated, Precipitation-Hardenable - UN |
| 278 | SAE AIR1106B-2014 | 2014-05-01 | English | (R) Some Factors Affecting Visibility of Aircraft Navigation and Anticollision Lights |
| 279 | SAE AS39029/37B-2014 | 2014-05-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/10 CONNECTORS) |
| 280 | SAE AS3508A-2014 | 2014-05-01 | English | INSERT - THIN WALL, SHORT AND LONG HOLE PREPARATION FOR |
| 281 | SAE AMS3194E-2014 | 2014-05-01 | English | Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature(DoD Adopted) |
| 282 | SAE AMS3193E-2014 | 2014-05-01 | English | Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature(DoD Adopted) |
| 283 | SAE AMS6491E-2014 | 2014-05-01 | English | Steel Bars, Forgings, and Tubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications, Double Vacuum Melted - UNS T11350(DoD Adopted) |
| 284 | SAE AS3508A-2014 | 2014-05-01 | English | INSERT - THIN WALL, SHORT AND LONG HOLE PREPARATION FOR |
| 285 | SAE AMS2770L-2014 | 2014-05-01 | English | Heat Treatment of Wrought Aluminum Alloy Parts(DoD Adopted) |
| 286 | SAE J2754-2014 | 2014-05-01 | English | Volumetric Rating of Excavator Mounted, Bucket Linkage Operated Grapples |
| 287 | SAE AS3107A-2014 | 2014-05-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731 (UNS S66286), .1900-32 UNJF-3A |
| 288 | SAE AS3106A-2014 | 2014-05-01 | English | (R) SCREW, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES AMS5731(UNS S66286), .1640-36 UNJF-3A(DoD Adopted) |
| 289 | SAE AMS4477-2014 | 2014-05-01 | English | Aluminum Alloy, Coiled Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4) Solution Treated - UNS A82024 |
| 290 | SAE J1939-15-2014 | 2014-05-01 | English | Physical Layer, 250 Kbps, Un-Shielded Twisted Pair (UTP) |
| 291 | SAE AS13000-2014 | 2014-05-01 | English | Problem Solving Requirements for Suppliers |
| 292 | SAE J3020-2014 | 2014-05-01 | English | Medical Device Shot Peening |
| 293 | SAE ARP4260B-2014 | 2014-05-01 | English | Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays |
| 294 | SAE AMS6490H-2014 | 2014-05-01 | English | Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted - UNS T11350(DoD Adopted) |
| 295 | SAE AIR1666B-2014 | 2014-05-01 | English | (R) Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems |
| 296 | SAE AS34541B-2014 | 2014-05-01 | English | CONNECTORS, RECEPTACLE, ELECTRICAL, JAM NUT MOUNTING, REAR RELEASE CRIMP CONTACT, AN TYPE(DoD Adopted) |
| 297 | SAE AS34521B-2014 | 2014-05-01 | English | CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, REAR RELEASE, CRIMP CONTACT, AN TYPE(DoD Adopted) |
| 298 | SAE AS34021D-2014 | 2014-05-01 | English | CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE(DoD Adopted) |
| 299 | SAE AMS3325F-2014 | 2014-05-01 | English | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 55 - 65(DoD Adopted) |
| 300 | SAE AMS3323A-2014 | 2014-05-01 | English | Sponge, Fluorosilicone (FVM) Rubber Closed Cell(DoD Adopted) |
| 301 | SAE AMS3347C-2014 | 2014-05-01 | English | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 - 55(DoD Adopted) |
| 302 | SAE AMS3381-2014 | 2014-05-01 | English | Sealing Compound, Aircraft Firewall, Non-Silicone |
| 303 | SAE AMS4919H-2014 | 2014-05-01 | English | Titanium Alloy Sheet, Strip, and Plate 6AI - 2Sn - 4Zr - 2Mo - 0.08Si Duplex Annealed - UNS R54620 |
| 304 | SAE AMS4944K-2014 | 2014-05-01 | English | Titanium Alloy Tubing, Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved - UNS R56320(DoD Adopted) |
| 305 | SAE AMS4967L-2014 | 2014-05-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable - UNS R56400(DoD Adopted) |
| 306 | SAE AMS7274J-2014 | 2014-05-01 | English | Rubber: Butadiene-Acrylonitrile (NBR) 65 to 75 Hardness, For Elastomeric Seals in Aircraft Engine Oil Systems(DoD Adopted) |
| 307 | SAE AS5103A-2014 | 2014-05-01 | English | (R) FITTING ASSEMBLY, PLUG, RING LOCKED PORT CONNECTION, 4000 PSI AND 5000 PSI /8/ |
| 308 | SAE AS5127/2B-2014 | 2014-05-01 | English | (R) Test Method for Aerospace Firewall Sealant Flame Penetration |
| 309 | SAE AS9712A-2014 | 2014-05-01 | English | SCREW, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .1380-40 UNJF-3A(DoD Adopted) |
| 310 | SAE AS22520/19-2014 | 2014-05-01 | English | CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (OUTER CONTACT) |
| 311 | SAE J1702-2014 | 2014-05-01 | English | Self-Propelled Sweepers Sweep-Ability Performance |
| 312 | SAE J1698-2014 | 2014-05-01 | English | (R) Event Data Recorder |
| 313 | SAE J429-2014 | 2014-05-01 | English | Mechanical and Material Requirements for Externally Threaded Fasteners(DoD Adopted) |
| 314 | SAE AS81550A-2014 | 2014-05-01 | English | (R) Insulating Compound, Electrical, Embedding, Reversion Resistant Silicone(DoD Adopted) |
| 315 | SAE AS39029/93B-2014 | 2014-05-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-83527, CONNECTOR)(DoD Adopted) |
| 316 | SAE AS39029/63C-2014 | 2014-05-01 | English | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-24308 CONNECTORS)(DoD Adopted) |
| 317 | SAE AS39029/37B-2014 | 2014-05-01 | English | (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/10 CONNECTORS)(DoD Adopted) |
| 318 | SAE AS22520/20-2014 | 2014-05-01 | English | CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 16 SHIELDED CONTACTS (SHIELD CRIMP SLEEVE) |
| 319 | SAE AS22520/21-2014 | 2014-05-01 | English | CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (OUTER CONTACT) |
| 320 | SAE AS22520/22-2014 | 2014-05-01 | English | CRIMPING TOOL, TYPE 2, TERMINAL, HAND, WIRE TERMINATION FOR SIZE 12 SHIELDED CONTACTS (SHIELD CRIMP SLEEVE) |
| 321 | SAE AS25274B-2014 | 2014-05-01 | English | (R) CAP, ELECTRICAL (WIRE END, CRIMP STYLE, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE(DoD Adopted) |
| 322 | SAE R-433-2014 | 2014-04-07 | English | Glass Engineering: Design Solutions for Automotive Applications - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 323 | SAE ARP1330D-2014 | 2014-04-01(S 2014) | English | Welding of Structures for Ground Support Equipment |
| 324 | SAE J2246-2014 | 2014-04-01(S 2014) | English | Antilock Brake System Review |
| 325 | SAE ARP4904A-2014 | 2014-04-01(S 2014) | English | Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components |
| 326 | SAE J1461-2014 | 2014-04-01(S 2014) | English | Manual Slack Adjuster Test Procedure |
| 327 | SAE AMS4985E-2014 | 2014-04-01(R 2018) | English | Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified - UNS R56401 |
| 328 | SAE ARP5647A-2014 | 2014-04-01 | English | (R) High Intensity Discharge Light Sources |
| 329 | SAE AS5261A-2014 | 2014-04-01 | English | (R) Contract, Wire Barrel, Crimp Style |
| 330 | SAE AMS4992B-2014 | 2014-04-01 | English | Casting, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically Pressed - UNS R56401 |
| 331 | SAE AMS5391H-2014 | 2014-04-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb (Nb) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast - UNS N07713(DoD Adopted) |
| 332 | SAE AS4417A-2014 | 2014-04-01 | English | (R) Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant, High Strength, All Metal, Solid Film Lubricated, 1400 °F, Procurement Specification |
| 333 | SAE J2542-2014 | 2014-04-01 | English | Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines |
| 334 | SAE AMS2980/3B-2014 | 2014-04-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 3 – Purchasing Specification - Fabric |
| 335 | SAE AMS2980/2B-2014 | 2014-04-01 | English | (R) Carbon Fiber Fabric and Epoxy Resin Wet Lay-up Repair Material Part 2 - Qualification Program |
| 336 | SAE AMS2980/1B-2014 | 2014-04-01 | English | (R) Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 1 - General Requirements |
| 337 | SAE AMS5390G-2014 | 2014-04-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W - 18.5Fe (N-12MV) As-Cast - UNS N06002(DoD Adopted) |
| 338 | SAE ARP5446A-2014 | 2014-04-01 | English | Safety Instructions for Sight-Impaired Passengers |
| 339 | SAE AMS5758J-2014 | 2014-04-01 | English | Alloy, Corrosion-Resistant, Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening - UNS R30035 |
| 340 | SAE AMS4991E-2014 | 2014-04-01 | English | Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional - UNS R56401 |
| 341 | SAE AMS5391H-2014 | 2014-04-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 73Ni - 0.14C - 13Cr - 4.5Mo - 2.3Cb (Nb) - 0.75Ti - 6.0Al - 0.010B - 0.10Zr Vacuum Cast, As-Cast - UNS N07713 |
| 342 | SAE AMS5396F-2014 | 2014-04-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 65Ni - 28Mo - 5.5Fe - 0.40V (N-12MV) As-Cast - UNS N10001(DoD Adopted) |
| 343 | SAE AMS2980/5A-2014 | 2014-04-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin |
| 344 | SAE AMS5388K-2014 | 2014-04-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8Fe - 0.40V (CW-12MW) As-Cast - UNS N10002(DoD Adopted) |
| 345 | SAE AS9582C-2014 | 2014-04-01 | English | WASHER, KEY - 270 DEG, LOCKING, CRES, UNS S32100 |
| 346 | SAE AMS5845J-2014 | 2014-04-01 | English | Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged - UNS R30035(DoD Adopted) |
| 347 | SAE AMS5844H-2014 | 2014-04-01 | English | Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened - UNS R30035(DoD Adopted) |
| 348 | SAE AMS2980/4B-2014 | 2014-04-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 4 - Purchasing Specification - Resin |
| 349 | SAE ARP1283B-2014 | 2014-04-01 | English | (R) Cargo Compartment Lighting for Transport Category Aircraft and Rotorcraft |
| 350 | SAE AS1390-2014 | 2014-04-01 | English | Level of Repair Analysis (LORA)(DoD Adopted) |
| 351 | SAE AS27194B-2014 | 2014-04-01 | English | SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-P-5315(DoD Adopted) |
| 352 | SAE AS4330A-2014 | 2014-04-01 | English | TUBING, FLARED, STANDARD DIMENSIONS FOR, DESIGN STANDARD(DoD Adopted) |
| 353 | SAE AMS6945B-2014 | 2014-04-01 | English | Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed - UNS R56400 |
| 354 | SAE AMS6946C-2014 | 2014-04-01 | English | Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed - UNS R54250 |
| 355 | SAE J387-2014 | 2014-04-01 | English | (R) Terminology - Motor Vehicle Lighting |
| 356 | SAE AS5192D-2014 | 2014-04-01 | English | FITTING, TEE, INTERNAL STRAIGHT THREAD PORT(DoD Adopted) |
| 357 | SAE J1699-4-2014 | 2014-04-01 | English | OBD-II Communications Anomaly List |
| 358 | SAE AMS5758J-2014 | 2014-04-01 | English | Alloy, Corrosion-Resistant, Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated for Work Strengthening - UNS R30035(DoD Adopted) |
| 359 | SAE AS4417A-2014 | 2014-04-01 | English | (R) Nuts, Self-Locking, Alloy, Corrosion and Heat Resistant, High Strength, All Metal, Solid Film Lubricated, 1400 °F, Procurement Specification(DoD Adopted) |
| 360 | SAE AS3179A-2014 | 2014-04-01 | English | BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20 UNJF-3A |
| 361 | SAE J2542-2014 | 2014-04-01 | English | Self-Propelled Sweepers and Scrubbers Fuel Consumption of Non-Propulsion Auxiliary Engines |
| 362 | SAE J2910-2014 | 2014-04-01 | English | Recommended Practice for the Design and Test of Hybrid Electric and Electric Trucks and Buses for Electrical Safety |
| 363 | SAE ARP5921-2014 | 2014-04-01 | English | Evaluation of Coking Propensity of Aviation Lubricants in an Air-Oil Mist Environment using the Vapor Phase Coker |
| 364 | SAE AS9582C-2014 | 2014-04-01 | English | WASHER, KEY - 270 DEG, LOCKING, CRES, UNS S32100(DoD Adopted) |
| 365 | SAE AS3180A-2014 | 2014-04-01 | English | BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5625-18 UNJF-3A |
| 366 | SAE AS6047B-2014 | 2014-04-01 | English | FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE |
| 367 | SAE AS27648D-2014 | 2014-04-01 | English | BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTERNAL SELF ALIGNING, EXTRA LIGHT DUTY(DoD Adopted) |
| 368 | SAE J89-2014 | 2014-04-01 | English | Dynamic Cushioning Performance Criteria for Snowmobile Seats(DoD Adopted) |
| 369 | SAE AS27195A-2014 | 2014-04-01 | English | (R) SEAL, BONDED, ALUMINUM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362(DoD Adopted) |
| 370 | SAE J2473-2014 | 2014-04-01 | English | Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge |
| 371 | SAE AS5261A-2014 | 2014-04-01 | English | (R) Contact, Wire Barrel, Crimp Type |
| 372 | SAE AMS4914F-2014 | 2014-04-01 | English | Titanium Alloy Cold Rolled Sheet and Strip 15V - 3Al - 3Cr - 3Sn Solution Heat Treated - UNS R58153 |
| 373 | SAE AMS4985E-2014 | 2014-04-01 | English | Titanium Alloy, Investment Castings 6Al - 4V 130 UTS, 120 YS, 6% EL Hot Isostatically Pressed Anneal Optional or When Specified - UNS R56401 |
| 374 | SAE AMS5755G-2014 | 2014-04-01 | English | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 64Ni - 5.0Cr - 24.5Mo - 5.5Fe Solution Heat Treated - UNS N10004(DoD Adopted) |
| 375 | SAE J1113-26-2014 | 2014-04-01 | English | Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields |
| 376 | SAE J1113-4-2014 | 2014-04-01 | English | (R) Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method |
| 377 | SAE AS81969/8-2014 | 2014-04-01 | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I & II, CLASS 2, COMPOSITION A |
| 378 | SAE AS6230-2014 | 2014-04-01 | English | FITTING, 37° INTERNAL FLARE TO TUBE WELD, STRAIGHT AND REDUCER |
| 379 | SAE AMS2980/4B-2014 | 2014-04-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 4 - Purchasing Specification - Resin |
| 380 | SAE AMS2980/3B-2014 | 2014-04-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 3 – Purchasing Specification - Fabric |
| 381 | SAE J1939-31-2014 | 2014-04-01 | English | Network Layer |
| 382 | SAE AMS2980/2B-2014 | 2014-04-01 | English | Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-up Repair Material Part 2 – Qualification Program |
| 383 | SAE J2799-2014 | 2014-04-01 | English | 70 MPa Compressed Hydrogen Surface Vehicle Fueling Connection Device and Optional Vehicle to Station Communications |
| 384 | SAE J759-2014 | 2014-04-01 | English | Lighting Identification Code(DoD Adopted) |
| 385 | SAE AMS2980/1B-2014 | 2014-04-01 | English | (R) Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 1 - General Requirements |
| 386 | SAE J617-2014 | 2014-04-01 | English | Engine Flywheel Housing and Mating Transmission Housing Flanges |
| 387 | SAE AS14238C-2014 | 2014-04-01 | English | (R) BUSHING, SLEEVE FLANGED, PRESS FIT, REAM TYPE(DoD Adopted) |
| 388 | SAE J1939-71-2014 | 2014-04-01 | English | Vehicle Application Layer |
| 389 | SAE ARP1967B-2014 | 2014-04-01 | English | (R) Containers, Shipping and Storage, Reusable(DoD Adopted) |
| 390 | SAE AMS2980/5A-2014 | 2014-04-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin |
| 391 | SAE R-392-2014 | 2014-03-20 | English | Theory and Applications of Aerodynamics for Ground Vehicles - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 392 | SAE JPF-P3-003-2014 | 2014-03-11 | English | Unwinding Electric Motors: Strategic Perspectives and Insights for Automotive Powertrain Applications - To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 393 | SAE R-297-2014 | 2014-03-05 | English | Automotive Fuels Reference Book - Third Edition; To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 Worldwide |
| 394 | SAE AMS7256B-2014 | 2014-03-01(S 2014) | English | Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 85 to 95(DoD Adopted) |
| 395 | SAE AS1825C-2014 | 2014-03-01(S 2014) | English | Methodology of Calculating Aircraft Cargo Volumes |
| 396 | SAE AS9597B-2014 | 2014-03-01(S 2014) | English | BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL UNS G41300, .190 X .250 BOLT (Stabilized Type)(DoD Adopted) |
| 397 | SAE AIR4899A-2014 | 2014-03-01(S 2014) | English | Cargo Compartments Maximum Package Size Calculation Methodology |
| 398 | SAE AS9596B-2014 | 2014-03-01(S 2014) | English | BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL UNS G41300, .190 BOLT (Stabilized Type)(DoD Adopted) |
| 399 | SAE AIR4652A-2014 | 2014-03-01(S 2014) | English | Design Factors - Handicapped Passenger Boarding Devices |
| 400 | SAE MAM2279B-2014 | 2014-03-01(S 2014) | English | Tolerances, Metric Rubber Products (Stabilized Type) |
| 401 | SAE AMS7255D-2014 | 2014-03-01(S 2014) | English | Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80 (Stabilized Type)(DoD Adopted) |
| 402 | SAE AS9440B-2014 | 2014-03-01(S 2014) | English | BOLT, MACHINE - HEXAGON, DRILLED, 6 HOLES, PD SHANK, NICKEL CADMIUM PLATED, STEEL UNS K14675, 195 KSI MIN, .1900-32 UNJF-3A (Stabilized Type)(DoD Adopted) |
| 403 | SAE AMS-QQ-A-250/18B-2014 | 2014-03-01(S 2014) | English | Aluminum 7075, Plate and Sheet Alclad One Side - UNS A97075(DoD Adopted) |
| 404 | SAE AMS3002H-2014 | 2014-03-01(S 2014) | English | Alcohol, Denatured Ethyl (Stabilized Type) |
| 405 | SAE AS708B-2014 | 2014-03-01(S 2014) | English | Top Visual Quality (TVQ) O-ring Packings and Gaskets - Surface Inspection Guide and Acceptance Standard (Stabilized Type) |
| 406 | SAE AMS-STD-185A-2014 | 2014-03-01(S 2014) | English | Identification Marking of Copper and Copper Base Alloy Mill Products (Stabilized Type)(DoD Adopted) |
| 407 | SAE AMS-R-83283A-2014 | 2014-03-01(S 2014) | English | Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type (Stabilized Type)(DoD Adopted) |
| 408 | SAE AS832G-2014 | 2014-03-01(S 2014) | English | Air/Surface (Intermodal) General Purpose Containers |
| 409 | SAE AMS-QQ-A-250/3A-2014 | 2014-03-01(S 2014) | English | Aluminum Alloy Alclad 2014, Plate and Sheet - UNS A82014(DoD Adopted) |
| 410 | SAE AMS3004H-2014 | 2014-03-01(S 2014) | English | Alcohol, Methyl (Stabilized Type) |
| 411 | SAE AS4041B-2014 | 2014-03-01(S 2014) | English | Air Mode General Purposes Containers |
| 412 | SAE AMS3208N-2014 | 2014-03-01(S 2014) | English | Chloroprene (CR) Rubber Weather Resistant 45 - 55 (Stabilized Type)(DoD Adopted) |
| 413 | SAE AMS3207N-2014 | 2014-03-01(S 2014) | English | Chloroprene (CR) Rubber Weather Resistant 25 - 35 (Stabilized Type)(DoD Adopted) |
| 414 | SAE AMS3209M-2014 | 2014-03-01(S 2014) | English | Chloroprene (CR) Rubber Weather Resistant 65 - 75 (Stabilized Type)(DoD Adopted) |
| 415 | SAE ARP5140A-2014 | 2014-03-01(S 2014) | English | Design Criteria for Lifts Used to Board Passengers with Mobility Impairments onto Aircraft with Doorsill Heights of 144 in or Less |
| 416 | SAE ARP5141A-2014 | 2014-03-01(S 2014) | English | Chassis Mounted Lifts Used to Board Airline Passengers with Mobility Impairments |
| 417 | SAE AS81969/39-2014 | 2014-03-01(R 2018) | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION B |
| 418 | SAE AS22520/39A-2014 | 2014-03-01(R 2018) | English | (R) CRIMPING TOOL, TERMINAL, HAND, ACTUATED, WIRE TERMINATION, IN-SERVICE INSPECTION GAGE FOR AS22520/5, /37, /38, AND /44 CRIMP TOOLS |
| 419 | SAE AMS3226H-2014 | 2014-03-01 | English | Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 45 - 55(DoD Adopted) |
| 420 | SAE AMS4988C-2014 | 2014-03-01 | English | Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated - UNS R56620 |
| 421 | SAE AMS2980B-2014 | 2014-03-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction |
| 422 | SAE AS95234/8-2014 | 2014-03-01 | English | CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, JAM NUT, WITH ACCESSORY THREADS |
| 423 | SAE J595-2014 | 2014-03-01 | English | (R) Directional Flashing Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles(DoD Adopted) |
| 424 | SAE AMS4978G-2014 | 2014-03-01 | English | Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed - UNS R56620(DoD Adopted) |
| 425 | SAE AMS4979H-2014 | 2014-03-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated - UNS R56620(DoD Adopted) |
| 426 | SAE AMS3212P-2014 | 2014-03-01 | English | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 55 - 65 |
| 427 | SAE AMS4975M-2014 | 2014-03-01 | English | Titanium Alloy, Bars, Wire, and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and Precipitation Heat Treated - UNS R54620(DoD Adopted) |
| 428 | SAE AMS4981G-2014 | 2014-03-01 | English | Titanium Alloy Bars, Wire, and Forgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation Heat Treated - UNS R56260(DoD Adopted) |
| 429 | SAE AS21900D-2014 | 2014-03-01 | English | (R) ADAPTER, FLARELESS TUBE TO A FLARED TUBE(DoD Adopted) |
| 430 | SAE AMS4976J-2014 | 2014-03-01 | English | Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and Precipitation Heat Treated - UNS R54620(DoD Adopted) |
| 431 | SAE AMS6905B-2014 | 2014-03-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo Duplex Annealed - UNS R54620 |
| 432 | SAE J1424-2014 | 2014-03-01 | English | Cargo Lamps for Use on Vehicles Under 5443 kg (12 000 lb) GVWR |
| 433 | SAE AMS6930E-2014 | 2014-03-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Solution Heat Treated and Aged - UNS R56400 |
| 434 | SAE AS8942-2014 | 2014-03-01 | English | Bearings, Plain and PTFE Lined, Self - Aligning |
| 435 | SAE AMS6931C-2014 | 2014-03-01 | English | Titanium Alloy Bars, Forgings and Forging Stock 6.0Al - 4.0V Annealed - UNS R56400 |
| 436 | SAE AIR4938A-2014 | 2014-03-01 | English | Composite and Bonded Structure Technician/Specialist Training Document |
| 437 | SAE AMS4928U-2014 | 2014-03-01 | English | Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 6Al - 4V Annealed - UNS R56400(DoD Adopted) |
| 438 | SAE J2972-2014 | 2014-03-01 | English | Definition of Road Vehicle Hands-Free Operation of a Person-to-Person Wireless Communication System or Device |
| 439 | SAE AMS4971K-2014 | 2014-03-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable - UNS R56620(DoD Adopted) |
| 440 | SAE AMS4911N-2014 | 2014-03-01 | English | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed - UNS R56400(DoD Adopted) |
| 441 | SAE AS22520/39A-2014 | 2014-03-01 | English | (R) CRIMPING TOOL, TERMINAL, HAND, ACTUATED, WIRE TERMINATION, IN-SERVICE INSPECTION GAGE FOR AS22520/5, /37, /38, AND /44 CRIMP TOOLS(DoD Adopted) |
| 442 | SAE AMS4965L-2014 | 2014-03-01 | English | Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al 4.0V Solution Heat Treated and Aged - UNS R56400(DoD Adopted) |
| 443 | SAE AMS4905E-2014 | 2014-03-01 | English | Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V Beta Annealed - UNS R56400 |
| 444 | SAE AS9101E-2014 | 2014-03-01 | English | (R) Quality Management Systems Audit Requirements for Aviation, Space, and Defense Organizations - Best Copy Available |
| 445 | SAE AS95234/8-2014 | 2014-03-01 | English | CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, JAM NUT, WITH ACCESSORY THREADS |
| 446 | SAE AS83461/2A-2014 | 2014-03-01 | English | PACKING, PREFORMED, MS83461 STRAIGHT THREAD TUBE FITTING BOSS(DoD Adopted) |
| 447 | SAE AS81969/39-2014 | 2014-03-01 | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE III, CLASS 2, COMPOSITION B |
| 448 | SAE AS103B-2014 | 2014-03-01 | English | FITTING ASSEMBLY, CROSS, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT |
| 449 | SAE AMS2980B-2014 | 2014-03-01 | English | Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction |
| 450 | SAE J211-1-2014 | 2014-03-01 | English | (R) Instrumentation for Impact Test - Part 1 - Electronic Instrumentation(DoD Adopted) |
| 451 | SAE AS568D-2014 | 2014-03-01 | English | Aerospace Size Standard for O-rings(DoD Adopted) |
| 452 | SAE AS3117A-2014 | 2014-03-01 | English | (R) BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5731,.375-24 UNJF-3A |
| 453 | SAE AS3118A-2014 | 2014-03-01 | English | Bolt, Machine-Hexagon Head, Drilled 6 Holes, PD Shank, CRES AMS 5731, .4375-20 UNJF-3A |
| 454 | SAE J635-2014 | 2014-03-01 | English | Fan Hub Bolt Circles and Pilot Holes |
| 455 | SAE R-408-2014 | 2014-02-24 | English | Analysis Techniques for Racecar Data Acquisition - Second Edition; To Purchase Call 1-800-854-7179 USA/Canada or 303-397-7956 |
| 456 | SAE AS9598B-2014 | 2014-02-01(S 2014) | English | BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .312 BOLT(DoD Adopted) |
| 457 | SAE ARP9090A-2014 | 2014-02-01(S 2014) | English | Requirements for Industry Standard e-Tool to Collaborate Quality Assurance Activities Among Customers and Suppliers |
| 458 | SAE AS150201 THRU AS150300A-2014 | 2014-02-01(S 2014) | English | Pin-Lock, Steel(DoD Adopted) |
| 459 | SAE AS9599B-2014 | 2014-02-01(S 2014) | English | BRACKET, ANGLE 90°, CADMIUM PLATED, ALLOY STEEL UNS G41300, .190 X .375 BOLT(DoD Adopted) |
| 460 | SAE AMS3430E-2014 | 2014-02-01(S 2014) | English | Brazing Filler Metal, Paste, Copper Water Thinning (Stabilized Type) |
| 461 | SAE ARP9134A-2014 | 2014-02-01(S 2014) | English | Supply Chain Risk Management Guideline |
| 462 | SAE ARP748B-2014 | 2014-02-01(S 2014) | English | Gas Turbine Engine Power Take-Off Pad Requirements |
| 463 | SAE AMS-QQ-A-250/5B-2014 | 2014-02-01(S 2014) | English | Aluminum Alloy Alclad 2024, Plate and Sheet - UNS A82024(DoD Adopted) |
| 464 | SAE AS3495A-2014 | 2014-02-01(S 2014) | English | Gasket - Type XIV-C Engine Accessory Drive(DoD Adopted) |
| 465 | SAE ARP1894B-2014 | 2014-02-01(S 2014) | English | Useful Life Determination for Chemical Oxygen Generators |
| 466 | SAE AMS-QQ-A-250/28C-2014 | 2014-02-01(S 2014) | English | Aluminum Alloy, 7011 Alclad 7178 Plate and Sheet - UNS A87178(DoD Adopted) |
| 467 | SAE AS9230A-2014 | 2014-02-01(S 2014) | English | BRACKET, ANGLE, 90° .190 x .312 BOLT(DoD Adopted) |
| 468 | SAE AMS-QQ-A-250/22C-2014 | 2014-02-01(S 2014) | English | Aluminum Alloy, 7178-T76, Alclad Plate and Sheet Improved Exfoliation Resistant - UNS A87178(DoD Adopted) |
| 469 | SAE J2293-1-2014 | 2014-02-01(S 2014) | English | Energy Transfer System for Electric Vehicles - Part 1: Functional Requirements and System Architectures |
| 470 | SAE AMS-QQ-A-200/2B-2014 | 2014-02-01(S 2014) | English | Aluminum Alloy 2014, Bar, Rod, Shapes, Tube, and Wire, Extruded - UNS A92014(DoD Adopted) |
| 471 | SAE AS84D-2014 | 2014-02-01(S 2014) | English | Splines, Involute (Full Fillet) |
| 472 | SAE AMS-QQ-A-250/15C-2014 | 2014-02-01(S 2014) | English | Aluminum Alloy Alclad 7178, Plate and Sheet - UNS A87178(DoD Adopted) |
| 473 | SAE AS3494A-2014 | 2014-02-01(S 2014) | English | GASKET - TYPE XIII ENGINE ACCESSORY DRIVE(DoD Adopted) |
| 474 | SAE J2293-2-2014 | 2014-02-01(S 2014) | English | Energy Transfer System for Electric Vehicles - Part 2: Communication Requirements and Network Architecture |
| 475 | SAE AMS-QQ-A-250/21C-2014 | 2014-02-01(S 2014) | English | Aluminum Alloy, 7178-T76, Plate and Sheet Improved Exfoliation Resistant - UNS A97178(DoD Adopted) |
| 476 | SAE J2191-2014 | 2014-02-01(R 2019) | English | Recommended Practice for Identification of Standardized Truck and Tractor Electrical Circuits |
| 477 | SAE AS81969/17-2014 | 2014-02-01(R 2018) | English | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE I, CLASS 1, COMPOSITION C |
| 478 | SAE AS210-2014 | 2014-02-01(R 2018) | English | Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude) |
| 479 | SAE AMS5353E-2014 | 2014-02-01(R 2015) | English | Steel, Corrosion-Resistant, Investment Castings 16Cr - 1.8Ni - 0.08N As Cast - UNS J91651 |
| 480 | SAE J2840-2014 | 2014-02-01 | English | High Voltage Shielded and Jacketed Cable |
| 481 | SAE AMS6299F-2014 | 2014-02-01 | English | Steel Bars, Forgings, and Tubing, Carburizing 0.50Cr - 1.8Ni - 0.25Mo (0.17 - 0.23C) (SAE 4320H) - UNS H43200(DoD Adopted) |
| 482 | SAE AMS4424L-2014 | 2014-02-01 | English | Magnesium Alloy Castings, Sand 6.0Al - 3.0Zn (AZ63-T6) Solution and Precipitation Heat Treated - UNS M11630(DoD Adopted) |
| 483 | SAE J2812-2014 | 2014-02-01 | English | Road Load Tire Model Validation Procedures for Dynamic Behavior |
| 484 | SAE AMS4362G-2014 | 2014-02-01 | English | Forgings, Magnesium Alloy 5.5Zn - 0.45Zr (ZK60A-T5) Precipitation Heat Treated - UNS M16600 |
| 485 | SAE AMS6532F-2014 | 2014-02-01 | English | Steel, Bars and Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Normalized and Overaged Precipitation Hardenable - UNS K92580(DoD Adopted) |
| 486 | SAE AS210-2014 | 2014-02-01 | English | Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude) |
| 487 | SAE J1879-2014 | 2014-02-01 | English | (R) Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications |
| 488 | SAE AMS5629F-2014 | 2014-02-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable - UNS S13800(DoD Adopted) |
| 489 | SAE AS95234/13-2014 | 2014-02-01 | English | CONNECTOR RECEPTACLE, REVERSE BAYONET COUPLING, BULKHEAD FEED-THRU |
| 490 | SAE AS9308B-2014 | 2014-02-01 | English | STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A(DoD Adopted) |
| 491 | SAE AMS5643/H1100-2014 | 2014-02-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution and Precipitation Heat Treated (H1100) - UNS S17400 |
| 492 | SAE AS9245B-2014 | 2014-02-01 | English | PIN, COTTER - CRES, UNS S32100, AS7211(DoD Adopted) |
| 493 | SAE J3007-2014 | 2014-02-01 | English | Top Speed Test Procedure for Electric Motorcycles |
| 494 | SAE AS85421/2B-2014 | 2014-02-01 | English | (R) FITTING END, STANDARD DIMENSIONS FOR, BULKHEAD, DYNAMIC BEAM SEAL, MALE(DoD Adopted) |
| 495 | SAE AMS5659P-2014 | 2014-02-01 | English | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu - UNS S15500(DoD Adopted) |
| 496 | SAE J2203-2014 | 2014-02-01 | English | SAE 17.6 Cubic Inch Spark Plug Rating Engine |
| 497 | SAE GEIA-HB-0007-B-2014 | 2014-02-01 | English | (R) Logistics Product Data Handbook - Formerly TechAmerica SAE GEIA-HB-0007-B |
| 498 | SAE AMS4437F-2014 | 2014-02-01 | English | Magnesium Alloy Castings, Sand 8.7Al - 0.70Zn (AZ91C-T6) Solution Heat Treated and Aged - UNS M11914 |
| 499 | SAE AMS2647E-2014 | 2014-02-01 | English | Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance |
| 500 | SAE AIR1615B-2014 | 2014-02-01 | English | (R) Thesaurus for Fuel System Components |
|