Pos | standard Number | publication date | Language | Description |
1 | DS DS/EN 15302 + A1-2010 | 2010-12-06 | English | Railway applications - Method for determining the equivalent conicity |
2 | DS DS/EN 4641-104-2010 | 2010-12-06 | English | Aerospace series - Cables, optical 125 µm diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter - Product standard |
3 | DS DS/EN 15020 + A1-2010 | 2010-12-06 | English | Railway applications - Rescue coupler - Performance requirements, specific interface geometry and test methods |
4 | DS DS/EN 4641-103-2010 | 2010-12-06 | English | Aerospace series - Cables, optical 125 µm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard |
5 | DS DS/EN 15227 + A1-2010 | 2010-12-06 | English | Railway applications - Crashworthiness requirements for railway vehicle bodies |
6 | DS DS/EN 13480-2/A1-2010 | 2010-12-06 | English | Metallic industrial piping - Part 2: Materials |
7 | DS DS/EN 15551 + A1-2010 | 2010-12-06 | English | Railway applications - Railway rolling stock - Buffers |
8 | DS DS/EN 13480-2/A2-2010 | 2010-12-06 | English | Metallic industrial piping - Part 2: Materials |
9 | DS DS/EN 14067-5 + A1-2010 | 2010-12-06 | English | Railway applications - Aerodynamics - Part 5: Requirements and test procedures for aerodynamics in tunnels |
10 | DS DS/EN 4641-105-2010 | 2010-12-06 | English | Aerospace series - Cables, optical 125 µm diameter cladding - Part 105: Semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter - Product standard |
11 | DS DS/EN 15566 + A1-2010 | 2010-12-06 | English | Railway applications - Railway rolling stock - Draw gear and screw coupling |
12 | DS DS-vejledning 26004-2010 | 2010-12-01 | Danish | Guidance on social responsibility |
13 | DS DS 26001-2010 | 2010-12-01 | Danish | Social responsibility management system |
14 | DS DS/EN 50272-1-2010 | 2010-11-30 | English | Safety requirements for secondary batteries and battery installations - Part 1: General safety information |
15 | DS DS/EN 15599-1-2010 | 2010-11-30 | English | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation |
16 | DS DS/EN 1504-9-2010 | 2010-11-30 | Danish, English | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
17 | DS DS/ISO 23873-2010 | 2010-11-29 | English | Hard coal - Method for the measurement of the swelling of hard coal using a dilatometer |
18 | DS DS/EN 15210-2-2010 | 2010-11-29 | English | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 2: Briquettes |
19 | DS DS/ISO 30023-2010 | 2010-11-29 | English | Textiles - Qualification symbols for labelling workwear to be industrially laundered |
20 | DS DS/EN 15944-2010 | 2010-11-29 | English | Liquid petroleum products - Determination of nickel and vanadium content - Inductively coupled plasma optical emission spectrometry method (ICP OES) |
21 | DS DS/EN ISO 3611-2010 | 2010-11-26 | English | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics |
22 | DS DS/EN ISO 9493-2010 | 2010-11-26 | English | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics |
23 | DS DS/EN 15287-1 + A1-2010 | 2010-11-25 | English | Chimneys - Design, installation and commissioning of chimneys - Part 1: Chimneys for non-roomsealed heating appliances |
24 | DS DS/EN 15886-2010 | 2010-11-25 | English | Conservation of cultural property - Test methods - Colour measurement of surfaces |
25 | DS DS/EN 15757-2010 | 2010-11-25 | English | Conservation of Cultural Property - Specifications for temperature and relative humidity to limit climate-induced mechanical damage in organic hygroscopic materials |
26 | DS DS/EN 12195-1-2010 | 2010-11-25 | English | Load restraining on road vehicles - Safety - Part 1: Calculation of securing forces |
27 | DS DS/EN 60445-2010 | 2010-11-24 | English | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
28 | DS DS-håndbog 116.2.1 Bind 1+2-2010 | 2010-11-24 | Danish, English | Safety of machinery - Part 2.1: Danger zones and safety distances |
29 | DS DS/EN ISO 11986-2010 | 2010-11-23 | English | Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release |
30 | DS DS/EN 30-1-1 + A2-2010 | 2010-11-23 | English | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
31 | DS DS/INF 70-6-2010 | 2010-11-22 | Danish | Plastics pipes - Butt fusion of polyolefine pipe systems - Inspection of butt fusion equipment |
32 | DS DS/EN 60191-6-21-2010 | 2010-11-22 | English | Mechanical standardization of semiconductor devices - Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline packages (SOP) |
33 | DS DS/EN 60384-26-2010 | 2010-11-22 | English | Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte |
34 | DS DS/EN 206-9-2010 | 2010-11-22 | Danish, English | Concrete - Part 9: Additional Rules for Self-compacting Concrete (SCC) |
35 | DS DS/ISO 3987-2010 | 2010-11-19 | English | Petroleum products - Determination of sulfated ash in lubricating oils and additives |
36 | DS DS/EN ISO 175-2010 | 2010-11-19 | English | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals |
37 | DS DS/ISO/TS 16610-32-2010 | 2010-11-19 | English | Geometrical product specifications (GPS) - Filtration - Part 32: Robust profile filters: Spline filters |
38 | DS DS/ISO/TS 16610-31-2010 | 2010-11-19 | English | Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters |
39 | DS DS/EN 60695-6-1/A1-2010 | 2010-11-19 | English | Fire hazard testing - Part 6-1: Smoke obscuration - General guidance |
40 | DS DS/ISO/TS 16610-30-2010 | 2010-11-19 | English | Geometrical product specifications (GPS) - Filtration - Part 30: Robust profile filters: Basic concepts |
41 | DS DS/ISO/TS 16610-28-2010 | 2010-11-19 | English | Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects |
42 | DS DS/EN 60745-2-17-2010 | 2010-11-19 | English | Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers |
43 | DS DS/EN 60939-1-2010 | 2010-11-19 | English | Passive filter units for electromagnetic interference suppression - Part 1: Generic specification |
44 | DS DS/EN 60335-2-76/A12-2010 | 2010-11-19 | English | Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers |
45 | DS DS/EN 972 + A1-2010 | 2010-11-19 | English | Tannery machines - Reciprocating roller machines - Safety requirements |
46 | DS DS/EN 60335-2-77-2010 | 2010-11-19 | English | Safety of household and similar electrical appliances - Part 2-77: Particular requirements for pedestrian-controlled walk-behind electrically powered lawn mowers |
47 | DS DS/EN 60695-1-11-2010 | 2010-11-19 | English | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
48 | DS DS/EN 619 + A1-2010 | 2010-11-19 | English | Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
49 | DS DS/EN 60825-2/A2-2010 | 2010-11-19 | English | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
50 | DS DS/EN 62329-3-102-2010 | 2010-11-19 | English | Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 102: Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance |
51 | DS DS/EN 62329-3-101-2010 | 2010-11-19 | English | Heat-shrinkable moulded shapes - Part 3: Specification requirements for shape dimensions, material requirements and compatibility performance - Sheet 101: Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements a |
52 | DS DS/EN 60684-3-280-2010 | 2010-11-19 | English | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking |
53 | DS DS/EN 60684-3-282-2010 | 2010-11-19 | English | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control |
54 | DS DS/ISO/TR 12845-2010 | 2010-11-18 | English | Selected illustrations of fractional factorial screening experiments |
55 | DS DS/ISO/TS 28037-2010 | 2010-11-18 | English | Determination and use of straight-line calibration functions |
56 | DS DS/EN ISO 14122-4/ZA + ZB-2010 | 2010-11-18 | Danish, English | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders |
57 | DS DS/ISO 21748-2010 | 2010-11-18 | English | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
58 | DS DS/EN ISO 14122-3/A1-2010 | 2010-11-18 | Danish, English | Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails |
59 | DS DS/ISO 16269-4-2010 | 2010-11-18 | English | Statistical interpretation of data - Part 4: Detection and treatment of outliers |
60 | DS DS/INSTA 800 E-2010 | 2010-11-18 | English | Cleaning quality - System for establishing and assessing cleaning quality |
61 | DS DS/EN 13260 + A1-2010 | 2010-11-17 | English | Railway applications - Wheelsets and bogies - Wheelsets - Product requirements |
62 | DS DS/EN 13261 + A1-2010 | 2010-11-17 | English | Railway applications - Wheelsets and bogies - Axles - Product requirements |
63 | DS DS/EN 13715 + A1-2010 | 2010-11-17 | English | Railway applications - Wheelsets and bogies - Wheels - Tread profile |
64 | DS DS/EN 13103 + A1-2010 | 2010-11-17 | English | Railway applications - Wheelsets and bogies - Non-powered axles - Design method |
65 | DS DS/EN 14865-2 + A2-2010 | 2010-11-17 | English | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
66 | DS DS/EN 15427 + A1-2010 | 2010-11-17 | English | Railway applications - Wheel/rail friction management - Flange lubrication |
67 | DS DS/EN 14865-1 + A1-2010 | 2010-11-17 | English | Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate |
68 | DS DS/EN 13104 + A1-2010 | 2010-11-17 | English | Railway applications - Wheelsets and bogies - Powered axles - Design method |
69 | DS DS/EN 12081 + A1-2010 | 2010-11-17 | English | Railway applications - Axleboxes - Lubricating greases |
70 | DS DS/EN 12082 + A1-2010 | 2010-11-17 | English | Railway applications - Axleboxes - Performance testing |
71 | DS DS/EN 12080 + A1-2010 | 2010-11-17 | English | Railway applications - Axleboxes - Rolling bearings |
72 | DS DS/EN 3911-2010 | 2010-11-16 | English | Aerospace series - Six lobe recess - Geometrical definition |
73 | DS DS/EN 4800-004-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 004: Wire |
74 | DS DS/EN 4800-006-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 006: Pre-production and production forgings |
75 | DS DS/EN 4800-007-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 007: Remelting stock |
76 | DS DS/EN 3873-2010 | 2010-11-16 | English | Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces |
77 | DS DS/EN ISO 20072-2010 | 2010-11-16 | English | Aerosol drug delivery device design verification - Requirements and test methods |
78 | DS DS/EN 4800-008-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 008: Pre-production and production castings |
79 | DS DS/EN 4800-002-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section |
80 | DS DS/EN 4800-003-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 003: Tube |
81 | DS DS/EN 4800-005-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 005: Forging stock |
82 | DS DS/EN 4800-001-2010 | 2010-11-16 | English | Aerospace series - Titanium and titanium alloys - Technical specification - Part 001: Plate, sheet and strip |
83 | DS DS/EN 15811/AC-2010 | 2010-11-16 | English | Agricultural machinery - Guards for moving parts of power transmission - Guard opening with tool |
84 | DS DS/EN 4539-003-2010 | 2010-11-16 | English | Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series with low friction coefficient |
85 | DS DS/EN ISO 4254-1/AC-2010 | 2010-11-16 | English | Agricultural machinery - Safety - Part 1: General requirements |
86 | DS DS/EN ISO 4254-6/AC-2010 | 2010-11-16 | English | Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors |
87 | DS DS/CLC/TR 50538-2010 | 2010-11-16 | English | Guide to EMC Directive conformity of equipment designed for military purposes |
88 | DS DS/EN ISO 4254-7/AC-2010 | 2010-11-16 | English | Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton harvesters |
89 | DS DS/EN ISO 4254-10/AC-2010 | 2010-11-16 | English | Agricultural machinery - Safety - Part 10: Rotary tedders and rakes |
90 | DS DS/EN 60601-2-33/Corr. Oct. 2010-2010 | 2010-11-16 | English | Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis |
91 | DS DS/EN 2133-2010 | 2010-11-16 | English | Aerospace series - Cadmium plating of steels with specified tensile strength <= 1 450 MPa, copper, copper alloys and nickel alloys |
92 | DS DS/EN 12405-1 + A2-2010 | 2010-11-16 | English | Gas meters - Conversion devices - Part 1: Volume conversion |
93 | DS DS/EN 4538-003-2010 | 2010-11-16 | English | Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient |
94 | DS DS/EN 61242/A1/Corr. nov.-2010 | 2010-11-15 | English | Electrical accessories - Cable reels for household and similar purposes |
95 | DS DS/EN ISO 9241-210-2010 | 2010-11-15 | English | Ergonomics of human-system interaction - Part 210: Human-centred design for interactive systems |
96 | DS DS/EN 60079-25-2010 | 2010-11-15 | English | Explosive atmospheres -- Part 25: Intrinsically safe electrical systems |
97 | DS DS/EN ISO 148-1-2010 | 2010-11-12 | English | Metallic materials - Charpy pendulum impact test - Part 1: Test method |
98 | DS DS/EN ISO 8510-2-2010 | 2010-11-11 | English | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel |
99 | DS DS/EN ISO 8394-2-2010 | 2010-11-11 | English | Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus |
100 | DS DS/EN ISO 8394-1-2010 | 2010-11-11 | English | Building construction - Jointing products - Part 1: Determination of extrudability of sealants |
101 | DS DS/EN 15149-1-2010 | 2010-11-11 | English | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
102 | DS DS/EN 1534-2010 | 2010-11-11 | English | Wood flooring - Determination of resistance to indentation - Test method |
103 | DS DS/EN ISO 10890-2010 | 2010-11-11 | English | Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation |
104 | DS DS/EN 12354-5/AC-2010 | 2010-11-11 | English | Building acoustics - Estimation of acoustic performance of building from the performance of elements - Part 5: Sounds levels due to the service equipment |
105 | DS DS/EN 15149-2-2010 | 2010-11-11 | English | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
106 | DS DS/ISO 10118-2-2010 | 2010-11-10 | English | Information technology - Security techniques - Hash-functions - Part 2: Hash-functions using an n-bit block cipher |
107 | DS DS/ISO 5667-21-2010 | 2010-11-10 | English | Water quality - Sampling - Part 21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes |
108 | DS DS/EN 15911-2010 | 2010-11-10 | English | Foodstuffs - Simultaneous determination of nine sweeteners by high performance liquid chromatography and evaporative light scattering detection |
109 | DS DS/EN 60335-2-90/A1-2010 | 2010-11-09 | English | Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens |
110 | DS DS/EN 61968-11-2010 | 2010-11-09 | English | Application integration at electric utilities - System interfaces for distribution management - Part 11: Common information model (CIM) extensions for distribution |
111 | DS DS/EN 60061-3/A42 (elektronisk)-2010 | 2010-11-09 | English | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
112 | DS DS/CLC/TR 61158-1-2010 | 2010-11-09 | English | Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series |
113 | DS DS/EN 60061-2/A41 (elektronisk)-2010 | 2010-11-09 | English | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
114 | DS DS/EN 61784-2-2010 | 2010-11-09 | English | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
115 | DS DS/EN 61784-1-2010 | 2010-11-09 | English | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
116 | DS DS/EN 61010-1-2010 | 2010-11-09 | English | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
117 | DS DS/EN 61850-7-2-2010 | 2010-11-09 | English | Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) |
118 | DS DS/EN 61010-2-030-2010 | 2010-11-09 | English | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for testing and measuring circuits |
119 | DS DS/EN 60601-2-33-2010 | 2010-11-09 | English | Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis |
120 | DS DS/EN 12975-1 + A1-2010 | 2010-11-09 | English | Thermal solar systems and components - Solar collectors - Part 1: General requirements |
121 | DS DS/EN 60061-3/A41 (elektronisk)-2010 | 2010-11-09 | English | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
122 | DS DS/EN 60335-2-27/Corr. sep.-2010 | 2010-11-09 | English | Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation |
123 | DS DS/EN 60065/A2-2010 | 2010-11-09 | English | Audio, video and similar electronic apparatus - Safety requirements |
124 | DS DS/EN 60546-1-2010 | 2010-11-09 | English | Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance |
125 | DS DS/EN 60061-1/A43 (elektronisk)-2010 | 2010-11-09 | English | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
126 | DS DS/EN 62541-3-2010 | 2010-11-09 | English | OPC unified architecture - Part 3: Address Space Model |
127 | DS DS/IEC TS 62666-2010 | 2010-11-09 | English | Guidelines for the inclusion of documentation aspects in product standards |
128 | DS DS/EN ISO 3924-2010 | 2010-11-09 | English | Petroleum products - Determination of boiling range distribution - Gas chromatography method |
129 | DS DS/EN 61373-2010 | 2010-11-09 | English | Railway applications - Rolling stock equipment - Shock and vibration tests |
130 | DS DS/CLC/TS 50238-3/Corr. sep.-2010 | 2010-11-09 | English | Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters |
131 | DS DS/EN 61158-2-2010 | 2010-11-09 | English | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
132 | DS DS/ISO 12924-2010 | 2010-11-09 | English | Lubricants, industrial oils and related products (Class L) - Family X (Greases) - Specification |
133 | DS DS/EN 60034-1/Corr. Oct.-2010 | 2010-11-09 | English | Rotating electrical machines - Part 1: Rating and performance |
134 | DS DS/EN 60061-1/A44 (elektronisk)-2010 | 2010-11-09 | English | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
135 | DS DS/EN 50159-2010 | 2010-11-09 | English | Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems |
136 | DS DS/EN 60546-2-2010 | 2010-11-09 | English | Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing |
137 | DS DS/EN 60061-2/A40 (elektronisk)-2010 | 2010-11-09 | English | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
138 | DS DS/EN 60974-11-2010 | 2010-11-08 | English | Arc welding equipment - Part 11: Electrode holders |
139 | DS DS/ISO/IEC 14776-121-2010 | 2010-11-08 | English | Information technology - Small Computer System Interface (SCSI) - Part 121: Passive Interconnect Performance (PIP) |
140 | DS DS/EN 62614-2010 | 2010-11-08 | English | Fibre optics - Launch condition requirements for measuring multimode attenuation |
141 | DS DS/EN 60728-11-2010 | 2010-11-08 | English | Cable networks for television signals, sound signals and interactive services - Part 11: Safety |
142 | DS DS/EN 60603-7-71-2010 | 2010-11-08 | English | Connectors for electronic equipment - Part 7-71: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1 000 MHz |
143 | DS DS/ISO 11783-6-2010 | 2010-11-08 | English | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 6: Virtual terminal |
144 | DS DS/EN 50122-3-2010 | 2010-11-05 | English | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems |
145 | DS DS/EN 60317-57-2010 | 2010-11-05 | English | Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 |
146 | DS DS/EN 60317-58-2010 | 2010-11-05 | English | Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 |
147 | DS DS/EN 62258-1-2010 | 2010-11-05 | English | Semiconductor die products - Part 1: Procurement and use |
148 | DS DS/EN 60191-6-20-2010 | 2010-11-05 | English | Mechanical standardization of semiconductor devices - Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline J-lead packages (SOJ) |
149 | DS DS/EN 62047-4-2010 | 2010-11-05 | English | Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS |
150 | DS DS/EN 60730-2-7-2010 | 2010-11-05 | English | Automatic electrical controls for household and similar use - Part 2-7: Particular requirements for timers and time switches |
151 | DS DS/EN 50122-2-2010 | 2010-11-05 | English | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems |
152 | DS DS/EN 60384-26-1-2010 | 2010-11-05 | English | Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ |
153 | DS DS/EN 50304/A1 - 60350/A11-2010 | 2010-11-05 | English | Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance |
154 | DS DS/EN 50310-2010 | 2010-11-04 | English | Application of equipotential bonding and earthing in buildings with information technology equipment |
155 | DS DS/EN 55016-1-1/A1-2010 | 2010-11-04 | English | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
156 | DS DS/EN 55016-2-3/A1-2010 | 2010-11-04 | English | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
157 | DS DS/ISO 28564-1-2010 | 2010-11-04 | English | Public information guidance systems - Part 1: Design principles and element requirements for location plans, maps and diagrams |
158 | DS DS/EN 301925 V1.3.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement |
159 | DS DS/ISO 26642-2010 | 2010-11-03 | English | Food products - Determination of the glycaemic index (GI) and recommendation for food classification |
160 | DS DS/ISO/IEC 24727-3/Corr.1 +cd-rom-2010 | 2010-11-03 | English | Identification cards - Integrated circuit card programming interface - Part 3: Application interface |
161 | DS GPS-hæftet-2010 | 2010-11-03 | Danish | The GPS-Booklet - An introduction to GPS |
162 | DS DS/EN 301025-2 V1.4.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 2: Harmonized EN covering the essential requirements of ar |
163 | DS DS/EN 301025-3 V1.4.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 3: Harmonized EN covering the essential requirements of ar |
164 | DS DS/ISO/IEC 7811-6/Corr.1-2010 | 2010-11-03 | English | Identification cards - Recording technique - Part 6: Magnetic stripe - High coercivity |
165 | DS DS/EN 301489-23 V1.4.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA, Direct Spread (UTRA and E-UTRA) Base Station (BS) radio, repeate |
166 | DS DS/EN 301489-24 V1.5.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA and E-UTRA) for Mobile and portable (UE) radi |
167 | DS DS/EN 301489-34 V1.1.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 34: Specific conditions for External Power Supply (EPS) for mobile phones |
168 | DS DS/ISO/IEC 15693-1-2010 | 2010-11-03 | English | Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 1: Physical characteristics |
169 | DS DS/EN 303213-2 V1.1.1-2010 | 2010-11-03 | English | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 2: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 2 including external interfaces |
170 | DS DS/EN 303213-3 V1.1.1-2010 | 2010-11-03 | English | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 3: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for a deployed cooperative sensor including its interfaces |
171 | DS DS/EN 303213-4-1 V1.1.1-2010 | 2010-11-03 | English | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 4: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for a deployed non-cooperative sensor including its interfaces; Sub-part |
172 | DS DS/EN ISO 9187-2-2010 | 2010-11-03 | English | Injection equipment for medical use - Part 2: One-point-cut (OPC) ampoules |
173 | DS DS/EN 300609-4 V9.2.1-2010 | 2010-11-03 | English | Global System for Mobile communications (GSM); Part 4: Harmonized EN for GSM Repeaters covering the essential requirements of article 3.2 of the R&TTE Directive |
174 | DS DS/EN 301502 V9.2.1-2010 | 2010-11-03 | English | Global System for Mobile communications (GSM); Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive |
175 | DS DS/EN ISO 9187-1-2010 | 2010-11-03 | English | Injection equipment for medical use - Part 1: Ampoules for injectables |
176 | DS DS/EN 301033 V1.3.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands |
177 | DS DS/EN 302665 V1.1.1-2010 | 2010-11-03 | English | Intelligent Transport Systems (ITS); Communications Architecture |
178 | DS DS/EN 302500-1 V2.1.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 1: Technical characteristics and method |
179 | DS DS/EN 303213-4-2 V1.1.1-2010 | 2010-11-03 | English | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 4: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for a deployed non-cooperative sensor including its interfaces; Sub-part |
180 | DS DS/ISO/IEC 14443-2-2010 | 2010-11-03 | English | Identification cards - Contactless integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface |
181 | DS DS/EN 300386 V1.5.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements |
182 | DS DS/ISO/IEC 10373-3-2010 | 2010-11-03 | English | Identification cards - Test methods - Part 3: Integrated circuit cards with contacts and related interface devices |
183 | DS DS/EN 302500-2 V2.1.1-2010 | 2010-11-03 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 9 GHz; Part 2: Harmonized EN covering the essential |
184 | DS DS/EN ISO/IEC 17043-2010 | 2010-11-02 | Danish, English | Conformity assessment - General requirements for proficiency testing |
185 | DS DS/EN 12350-8-2010 | 2010-11-02 | Danish, English | Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test |
186 | DS DS/EN ISO 15630-1-2010 | 2010-11-02 | English | Steel for the reinforcement and prestressing of concrete - Test methods - Part 1: Reinforcing bars, wire rod and wire |
187 | DS DS/EN 10169-2010 | 2010-11-02 | English | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
188 | DS DS/EN ISO 15630-3-2010 | 2010-11-02 | English | Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel |
189 | DS DS/EN ISO 15630-2-2010 | 2010-11-02 | English | Steel for the reinforcement and prestressing of concrete - Test methods - Part 2: Welded fabric |
190 | DS DS/EN ISO 8835-3/A1-2010 | 2010-11-02 | English | Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems |
191 | DS DS/ISO/TS 80004-1-2010 | 2010-11-02 | English | Nanotechnologies - Vocabulary - Part 1: Core terms |
192 | DS DS/EN ISO 14171-2010 | 2010-11-01 | English | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification |
193 | DS DS/EN ISO 13341-2010 | 2010-11-01 | English | Gas cylinders - Fitting of valves to gas cylinders |
194 | DS DS/EN 15950-2010 | 2010-11-01 | English | Fertilizers - Determination of N-(1,2-dicarboxyethyl)-D,L-aspartic acid (Iminodisuccinic acid, IDHA) using high-performance liquid chromatography (HPLC) |
195 | DS DS/EN 15643-1-2010 | 2010-11-01 | English | Sustainability of construction works - Sustainability assessment of buildings - Part 1: General framework |
196 | DS DS/EN 1948-4-2010 | 2010-11-01 | English | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs |
197 | DS DS/EN 50191-2010 | 2010-11-01 | English | Erection and operation of electrical test equipment |
198 | DS DS/ISO 26000-2010 | 2010-11-01 | English | Guidance on social responsibility |
199 | DS DS/EN 140401-803/A1-2010 | 2010-10-28 | English | Detail specification: Fixed low power film SMD resistors - Cylindrical - Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 |
200 | DS DS/CEN/TR 16099-2010 | 2010-10-28 | English | Fire service equipment - Summary of water pressures specified in published CEN/TC 192 standards |
201 | DS DS/EN ISO 12474-2010 | 2010-10-28 | English | Hexagon socket head cap screws with metric fine pitch thread |
202 | DS DS/EN 60034-1-2010 | 2010-10-28 | English | Rotating electrical machines - Part 1: Rating and performance |
203 | DS DS/EN 15828-2010 | 2010-10-28 | English | Hardware for furniture - Strength and durability of hinges and their components - Stays and hinges pivoting on a horizontal axis |
204 | DS DS/EN ISO 4263-3-2010 | 2010-10-28 | English | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids |
205 | DS DS/EN ISO 6719-2010 | 2010-10-28 | English | Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
206 | DS DS/EN ISO 1833-20-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 20: Mixtures of elastane and certain other fibres (method using dimethylacetamide) |
207 | DS DS/EN 14588-2010 | 2010-10-28 | English | Solid biofuels - Terminology, definitions and descriptions |
208 | DS DS/EN 61666-2010 | 2010-10-28 | English | Industrial systems, installations and equipment and industrial products - Identification of terminals within a system |
209 | DS DS/EN ISO 1833-21-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) |
210 | DS DS/EN ISO 1833-16-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene) |
211 | DS DS/EN ISO 1833-1-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 1: General principles of testing |
212 | DS DS/EN ISO 1833-2-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 2: Ternary fibre mixtures |
213 | DS DS/EN 140401-802/A1-2010 | 2010-10-28 | English | Detail specification: Fixed low power film SMD resistors - Rectangular - Stability classes 1; 2 |
214 | DS DS/EN ISO 1833-3-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate and certain other fibres (method using acetone) |
215 | DS DS/EN ISO 1833-4-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite) |
216 | DS DS/EN ISO 1833-5-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) |
217 | DS DS/EN ISO 225-2010 | 2010-10-28 | English, French, Russian, German | Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions |
218 | DS DS/EN ISO 1833-6-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) |
219 | DS DS/EN ISO 1833-7-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 7: Mixtures of polyamide and certain other fibres (method using formic acid) |
220 | DS DS/EN ISO 1833-8-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 8: Mixtures of acetate and triacetate fibres (method using acetone) |
221 | DS DS/EN 50386-2010 | 2010-10-28 | English | Bushings up to 1 kV and from 250 A to 5 kA, for liquid filled transformers |
222 | DS DS/EN ISO 1833-9-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol) |
223 | DS DS/EN ISO 1833-10-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 10: Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane) |
224 | DS DS/EN ISO 13982-1/A1-2010 | 2010-10-28 | English | Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) |
225 | DS DS/EN ISO 1833-11-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 11: Mixtures of cellulose and polyester fibres (method using sulfuric acid) |
226 | DS DS/EN ISO 1833-12-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide) |
227 | DS DS/EN 13148-2010 | 2010-10-28 | English | Copper and copper alloys - Hot-dip tinned strip |
228 | DS DS/EN ISO 1833-13-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 13: Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone) |
229 | DS DS/EN ISO 1833-14-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 14: Mixtures of acetate and certain chlorofibres (method using acetic acid) |
230 | DS DS/EN ISO 1833-19-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 19: Mixtures of cellulose fibres and asbestos (method by heating) |
231 | DS DS/EN ISO 1833-18-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 18: Mixtures of silk and wool or hair (method using sulfuric acid) |
232 | DS DS/EN ISO 1833-15-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 15: Mixtures of jute and certain animal fibres (method by determining nitrogen content) |
233 | DS DS/EN ISO 1833-17-2010 | 2010-10-28 | English | Textiles - Quantitative chemical analysis - Part 17: Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid) |
234 | DS DS/EN 14908-6-2010 | 2010-10-27 | English | Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 6: Application elements |
235 | DS DS/EN 62508-2010 | 2010-10-26 | English | Guidance on human aspects of dependability |
236 | DS DS/ISO 19143-2010 | 2010-10-26 | English | Geographic information - Filter encoding |
237 | DS DS/ISO/IEC 1539-1-2010 | 2010-10-26 | English | Information technology - Programming languages - Fortran - Part 1: Base language |
238 | DS DS/CWA 16213-2010 | 2010-10-26 | English | End User e-Skills Framework Requirements |
239 | DS DS/EN 61386-24-2010 | 2010-10-26 | English | Conduit systems for cable management - Part 24: Particular requirements - Conduit systems buried underground |
240 | DS DS/EN 13000/AC-2010 | 2010-10-26 | English | Cranes - Mobile cranes |
241 | DS DS/EN 60793-1-41-2010 | 2010-10-25 | English | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth |
242 | DS DS/ISO 639-4-2010 | 2010-10-25 | English | Codes for the representation of names of languages - Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines |
243 | DS DS/EN 15908-2010 | 2010-10-25 | English | Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
244 | DS DS/EN 14601 + A1-2010 | 2010-10-25 | English | Railway applications - Straight and angled end cocks for brake pipe and main reservoir pipe |
245 | DS DS/IEC/TR 62362-2010 | 2010-10-25 | English | Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance |
246 | DS DS/EN 15806-2010 | 2010-10-25 | English | Railway applications - Braking - Static brake testing |
247 | DS DS/ISO/IEC/TR 29125-2010 | 2010-10-25 | English | Information technology - Telecommunications cabling requirements for remote powering of terminal equipment |
248 | DS DS/EN 975-1/AC-2010 | 2010-10-25 | English | Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech |
249 | DS DS/EN 54-25/AC-2010 | 2010-10-25 | English | Fire detection and fire alarm systems - Part 25: Components using radio links |
250 | DS DS/EN 60793-1-31-2010 | 2010-10-25 | English | Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength |
251 | DS DS/EN 15355 + A1-2010 | 2010-10-25 | English | Railway applications - Braking - Distributor valves and distributor-isolating devices |
252 | DS DS/EN 14229-2010 | 2010-10-25 | English | Structural timber - Wood poles for overhead lines |
253 | DS DS/EN 15624 + A1-2010 | 2010-10-25 | English | Railway applications - Braking - Empty-loaded changeover devices |
254 | DS DS/EN 15625 + A1-2010 | 2010-10-25 | English | Railway applications - Braking - Automatic variable load sensing devices |
255 | DS DS/EN ISO 9444-2-2010 | 2010-10-25 | English | Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate |
256 | DS DS/EN 15611 + A1-2010 | 2010-10-25 | English | Railway applications - Braking - Relay valves |
257 | DS DS/EN 50518-2-2010 | 2010-10-25 | English | Monitoring and alarm receiving centre - Part 2: Technical requirements |
258 | DS DS/EN 15612 + A1-2010 | 2010-10-25 | English | Railway applications - Braking - Brake pipe accelerator valve |
259 | DS DS/EN 60793-1-32-2010 | 2010-10-25 | English | Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability |
260 | DS DS-håndbog 116.2.2-2010 | 2010-10-22 | Danish, English | Safety of machinery - Part 2.2: Safety devices |
261 | DS DS/EN 1555-5-2010 | 2010-10-21 | English | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
262 | DS DS/EN 12697-47-2010 | 2010-10-21 | English | Bituminous mixtures - Test methods for hot mix asphalt - Part 47: Determination of the ash content of natural asphalts |
263 | DS DS/EN 1555-3-2010 | 2010-10-21 | English | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
264 | DS DS/EN 1555-2-2010 | 2010-10-21 | English | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
265 | DS DS/EN 1555-1-2010 | 2010-10-21 | English | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
266 | DS DS/EN ISO 14122-2/A1-2010 | 2010-10-21 | Danish, English | Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways |
267 | DS DS/EN 1317-3-2010 | 2010-10-21 | English | Road restraint systems - Part 3: Performance classes, impact test acceptance criteria and test methods for crash cushions |
268 | DS DS/EN 1317-2-2010 | 2010-10-21 | English | Road restraint systems - Part 2: Performance classes, impact test acceptance criteria and test methods for safety barriers including vehicle parapets |
269 | DS DS/EN 1317-1-2010 | 2010-10-21 | English | Road restraint systems - Part 1: Terminology and general criteria for test methods |
270 | DS DS/EN 15599-2-2010 | 2010-10-21 | English | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products |
271 | DS DS/EN 15600-2-2010 | 2010-10-21 | English | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products |
272 | DS DS/EN 12317-2-2010 | 2010-10-21 | English | Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing |
273 | DS DS/EN 15600-1-2010 | 2010-10-21 | English | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation |
274 | DS DS/EN 12311-2-2010 | 2010-10-21 | English | Flexible sheets for waterproofing - Determination of tensile properties - Part 2: Plastic and rubber sheets for roof waterproofing |
275 | DS DS/EN ISO 12567-1-2010 | 2010-10-21 | English | Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors |
276 | DS DS/ISO/IEC TR 24772-2010 | 2010-10-20 | English | Information technology - Programming languages - Guidance to avoiding vulnerabilities in programming languages through language selection and use |
277 | DS DS/ISO/IEC TR 24748-1-2010 | 2010-10-20 | English | Systems and software engineering - Life cycle management - Part 1: Guide for life cycle management |
278 | DS DS/CLC/TR 61491-2010 | 2010-10-20 | English | Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives |
279 | DS DS/EN 3238-2010 | 2010-10-19 | English | Aerospace series - Metallic materials - Test method - Shear test for wires and rivets |
280 | DS DS/EN 4657-2010 | 2010-10-19 | English | Aerospace series - Steel FE-PM1507 (X1CrNiMoAlTi12-11-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation remelted - Bars - a or D < 200 mm - Rm > 1 650 MPa |
281 | DS DS/EN 4025-2010 | 2010-10-19 | English | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 45°, bulkhead |
282 | DS DS/EN 4700-007-2010 | 2010-10-19 | English | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
283 | DS DS/EN 4023-2010 | 2010-10-19 | English | Aerospace series - Pipe coupling 8°30 in titanium alloy - Elbows 45° |
284 | DS DS/EN 4700-004-2010 | 2010-10-19 | English | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
285 | DS DS/EN ISO 14122-4/A1-2010 | 2010-10-19 | English | Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders |
286 | DS DS/EN 3843-2010 | 2010-10-19 | English | Aerospace series - Nuts, bihexagonal, self-locking, with counterbore, in heat resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 650 °C |
287 | DS DS/EN 3274-2010 | 2010-10-19 | English | Aerospace series - Pipe coupling 8°30 - Thread end - Geometric configuration |
288 | DS DS/EN 3155-026-2010 | 2010-10-19 | English | Aerospace series - Electrical contacts used in elements of connection - Part 026: Contacts, electrical, male, type A, crimp, class R - Product standard |
289 | DS DS/EN 3777-2010 | 2010-10-19 | English | Aerospace series - Pins, quick release, single and double acting - Technical specification |
290 | DS DS/EN 62479-2010 | 2010-10-18 | English | Assessment of the compliance of low power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) |
291 | DS DS/EN 61076-3-115-2010 | 2010-10-18 | English | Connectors for electronic equipment - Product requirements - Part 3-115: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments |
292 | DS DS/EN 60603-7-7-2010 | 2010-10-18 | English | Connectors for electronic equipment -- Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz |
293 | DS DS/EN 60512-23-2-2010 | 2010-10-18 | English | Connectors for electronic equipment - Tests and measurements - Part 23-2: Screening and filtering tests - Test 23b: Suppression characteristics of integral filters |
294 | DS DS/EN 60512-17-3-2010 | 2010-10-18 | English | Connectors for electronic equipment - Tests and measurements - Part 17-3: Cable clamping tests - Test 17c: Cable clamp resistance to cable pull (tensile) |
295 | DS DS/CLC/TR 60919-2-2010 | 2010-10-18 | English | Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching |
296 | DS DS/EN 60512-17-1-2010 | 2010-10-18 | English | Connectors for electronic equipment - Tests and measurements - Part 17-1: Cable clamping tests - Test 17a: Cable clamp robustness |
297 | DS DS/EN 60512-17-4-2010 | 2010-10-18 | English | Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion |
298 | DS DS/EN 60512-8-1-2010 | 2010-10-18 | English | Connectors for electronic equipment - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse |
299 | DS DS/HD 60364-7-702-2010 | 2010-10-18 | English | Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
300 | DS DS/EN ISO 11148-6-2010 | 2010-10-15 | English | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners |
301 | DS DS/EN ISO 11148-4-2010 | 2010-10-15 | English | Hand-held non-electric power tools - Safety requirements - Part 4: Nonrotary percussive power tools |
302 | DS DS/EN ISO 11148-3-2010 | 2010-10-15 | English | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers |
303 | DS DS/EN ISO 14729/A1-2010 | 2010-10-15 | English | Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses |
304 | DS DS/EN ISO 24034-2010 | 2010-10-15 | English | Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification |
305 | DS DS/EN ISO 25178-602-2010 | 2010-10-15 | English | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments |
306 | DS DS/EN ISO 10360-5-2010 | 2010-10-15 | English | Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems |
307 | DS DS/EN ISO 24500-2010 | 2010-10-14 | English | Ergonomics - Accessible design - Auditory signals for consumer products |
308 | DS DS/EN 12043 + A1-2010 | 2010-10-14 | English | Food processing machinery - Intermediate provers - Safety and hygiene requirements |
309 | DS DS/EN 12042 + A1-2010 | 2010-10-14 | English | Food processing machinery - Automatic dividers - Safety and hygiene requirements |
310 | DS DS/EN ISO 8536-4-2010 | 2010-10-13 | English | Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed |
311 | DS DS/EN 1760-2 + A1-2010 | 2010-10-12 | Danish, English | Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars |
312 | DS DS 3999-2010 | 2010-10-12 | Danish | Requirements for security of cash centers, transit stations and cash transport |
313 | DS DS/ISO 26322-2-2010 | 2010-10-12 | English | Tractors for agriculture and forestry - Safety - Part 2: Narrow-track and small tractors |
314 | DS DS/EN ISO 13855-2010 | 2010-10-12 | Danish, English | Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body |
315 | DS DS/ISO 29541-2010 | 2010-10-11 | English | Solid mineral fuels - Determination of total carbon, hydrogen and nitrogen content - Instrumental method |
316 | DS DS/EN 15821-2010 | 2010-10-11 | English | Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods |
317 | DS DS/EN 15947-1-2010 | 2010-10-11 | English, French, German | Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 1: Terminology |
318 | DS DS/EN 15947-2-2010 | 2010-10-11 | English | Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 2: Categories and types of firework |
319 | DS DS/EN 15947-3-2010 | 2010-10-11 | English | Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 3: Minimum labelling requirements |
320 | DS DS/EN 15947-5-2010 | 2010-10-11 | English | Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 5: Requirements for construction and performance |
321 | DS DS/CEN/TS 15406-2010 | 2010-10-11 | English | Solid recovered fuels - Determination of bridging properties of bulk material |
322 | DS DS/ISO 11349-2010 | 2010-10-11 | English | Water quality - Determination of low-volatility lipophilic substances - Gravimetric method |
323 | DS DS/EN 15947-4-2010 | 2010-10-11 | English | Pyrotechnic articles - Fireworks, Categories 1, 2 and 3 - Part 4: Test methods |
324 | DS DS/EN 326-2-2010 | 2010-10-11 | English | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
325 | DS DS/EN ISO 12952-2-2010 | 2010-10-11 | English | Textiles - Assessment of the ignitability of bedding items - Part 2: Ignition source: match-flame equivalent |
326 | DS DS/EN ISO 12952-1-2010 | 2010-10-11 | English | Textiles - Assessment of the ignitability of bedding items - Part 1: Ignition source: smouldering cigarette |
327 | DS DS/EN 998-2-2010 | 2010-10-08 | English | Specification for mortar for masonry - Part 2: Masonry mortar |
328 | DS DS/EN 998-1-2010 | 2010-10-08 | English | Specification for mortar for masonry - Part 1: Rendering and plastering mortar |
329 | DS DS/CEN/TS 16071-2010 | 2010-10-08 | English | Interoperability of Flight Data Processing (Air Traffic Control - Air Traffic Control) for application under the Single European Sky - Interoperability Regulation EC 552/2004 |
330 | DS DS/EN 1012-1-2010 | 2010-10-08 | English | Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors |
331 | DS DS/EN 545-2010 | 2010-10-08 | English | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
332 | DS DS/HD 60269-3-2010 | 2010-10-08 | English | Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F |
333 | DS DS/EN 50180-2010 | 2010-10-08 | English | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers |
334 | DS DS/EN 60401-2-2010 | 2010-10-08 | English | Terms and nomenclature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions |
335 | DS DS/EN 15795 + NA-2010 | 2010-10-07 | English | Products used for treatment of water intended for human consumption - Natural unexpanded aluminosilicates |
336 | DS DS/EN 15193/AC-2010 | 2010-10-07 | English | Energy performance of buildings - Energy requirements for lighting |
337 | DS DS/EN 13477-2-2010 | 2010-10-07 | English | Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic |
338 | DS DS/ISO/TS 10867-2010 | 2010-10-07 | English | Nanotechnologies - Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy |
339 | DS DS/EN ISO 29701-2010 | 2010-10-07 | English | Nanotechnologies - Endotoxin test on nanomaterial samples for in vitro systems - Limulus amebocyte lysate (LAL) test |
340 | DS DS/EN ISO 7963-2010 | 2010-10-07 | English | Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 |
341 | DS DS/CEN/TR 16042-2010 | 2010-10-06 | English | Bicycles - Replies to requests for interpretation of EN 14765 |
342 | DS DS/CEN/TR 16041-2010 | 2010-10-06 | English | Bicycles - Replies to requests for interpretation of EN 14764 |
343 | DS DS/CEN/TR 16043-2010 | 2010-10-06 | English | Bicycles - Replies to requests for interpretation of EN 14766 |
344 | DS DS/EN 14351-1 + A1-2010 | 2010-10-06 | Danish, English | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics |
345 | DS DS/CEN/TR 16044-2010 | 2010-10-06 | English | Bicycles - Replies to requests for interpretation of EN 14781 |
346 | DS DS/EN 547-1 + A1-2010 | 2010-10-06 | Danish, English | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
347 | DS DS/EN 547-2 + A1-2010 | 2010-10-06 | Danish, English | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
348 | DS DS/EN 547-3 + A1-2010 | 2010-10-06 | Danish, English | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
349 | DS DS/EN 15938-2010 | 2010-10-06 | English | Automotive fuels - Ethanol blending component and ethanol (E85) automotive fuel - Determination of electrical conductivity |
350 | DS DS/EN 15930-2010 | 2010-10-06 | English | Fibres - Elasticity of fibres - Test methods |
351 | DS DS/EN ISO 14122-1/A1-2010 | 2010-10-06 | Danish, English | Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels |
352 | DS DS/EN ISO 12863-2010 | 2010-10-06 | English | Standard test method for assessing the ignition propensity of cigarettes |
353 | DS DS/EN 13113 + A1-2010 | 2010-10-06 | English | Tannery machines - Roller coating machines - Safety requirements |
354 | DS DS/ISO/TS 29585-2010 | 2010-10-06 | English | Health informatics - Deployment of a clinical data warehouse |
355 | DS DS/ISO/TS 27527-2010 | 2010-10-06 | English | Health informatics - Provider identification |
356 | DS DS/EN 61512-4-2010 | 2010-10-05 | English | Batch control - Part 4: Batch production records |
357 | DS DS/EN 80601-2-30-2010 | 2010-10-05 | English | Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers |
358 | DS DS/CLC/TR 62271-208-2010 | 2010-10-05 | English | High-voltage switchgear and controlgear - Part 208: Methods to quantify the steady state, power-frequency electromagnetic fields generated by HV switchgear assemblies and HV/LV prefabricated substations |
359 | DS DS/EN ISO 10140-4-2010 | 2010-10-05 | English | Acoustics - Laboratory measurement of sound insulation of building elements - Part 4: Measurement procedures and requirements |
360 | DS DS/EN ISO 10140-1-2010 | 2010-10-05 | English | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1: Application rules for specific products |
361 | DS DS/EN ISO 10140-2-2010 | 2010-10-05 | English | Acoustics - Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation |
362 | DS DS/EN ISO 10140-5-2010 | 2010-10-05 | English | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5: Requirements for test facilities and equipment |
363 | DS DS/EN 349 + A1-2010 | 2010-10-05 | Danish, English | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
364 | DS DS/EN ISO 15186-3-2010 | 2010-10-05 | English | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies |
365 | DS DS/EN ISO 15186-2-2010 | 2010-10-05 | English | Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 2: Field measurements |
366 | DS DS/EN ISO 10140-3-2010 | 2010-10-05 | English | Acoustics - Laboratory measurement of sound insulation of building elements - Part 3: Measurement of impact sound insulation |
367 | DS DS/EN ISO 2128-2010 | 2010-10-04 | English | Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope |
368 | DS DS/EN ISO 3211-2010 | 2010-10-04 | English | Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation |
369 | DS DS/EN ISO 7759-2010 | 2010-10-04 | English | Anodizing of aluminium and its alloys - Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer |
370 | DS DS/EN 4136/AC-2010 | 2010-10-04 | English | Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C |
371 | DS DS/EN ISO 10215-2010 | 2010-10-04 | English | Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method |
372 | DS DS/EN 1536-2010 | 2010-10-04 | English | Execution of special geotechnical work - Bored piles |
373 | DS DS/EN 4473-2010 | 2010-10-04 | English | Aerospace series - Aluminium pigmented coatings for fasteners - Technical specification |
374 | DS DS/EN 13565-2/AC-2010 | 2010-10-04 | English | Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance |
375 | DS DS/EN 4655-2010 | 2010-10-04 | English | Aerospace series - Steel FE-PM1506 (X1CrNiMoAlTi12-10-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bars - a or D <= 200 mm - Rm + 1 400 MPa |
376 | DS DS/EN ISO 2085-2010 | 2010-10-04 | English | Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test |
377 | DS DS/ISO/TS 22789-2010 | 2010-10-04 | English | Health informatics - Conceptual framework for patient findings and problems in terminologies |
378 | DS DS/EN 4700-005-2010 | 2010-10-04 | English | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
379 | DS DS/EN 312-2010 | 2010-10-04 | English | Particleboards - Specifications |
380 | DS DS/EN 4700-006-2010 | 2010-10-04 | English | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
381 | DS DS/EN 2434-001-2010 | 2010-10-04 | English | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 001: Basic requirements |
382 | DS DS/EN 2434-002-2010 | 2010-10-04 | English | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 002: High chemical resistance |
383 | DS DS/EN 4700-003-2010 | 2010-10-04 | English | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
384 | DS DS/ISO 11462-2-2010 | 2010-10-04 | English | Guidelines for implementation of statistical process control (SPC) - Part 2: Catalogue of tools and techniques |
385 | DS DS/EN 3475-100-2010 | 2010-10-04 | English | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General |
386 | DS DS/EN 4700-002-2010 | 2010-10-04 | English | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
387 | DS DS/EN 4700-001-2010 | 2010-10-04 | English | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
388 | DS DS/EN 1538-2010 | 2010-10-04 | English | Execution of special geotechnical work - Diaphragm walls |
389 | DS DS/EN 2434-003-2010 | 2010-10-04 | English | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior |
390 | DS DS/EN 2434-004-2010 | 2010-10-04 | English | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 004: High flexibility |
391 | DS DS/HD 60269-2-2010 | 2010-10-01 | English | Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J |
392 | DS DS/EN ISO 19879-2010 | 2010-10-01 | English | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections |
393 | DS DS/CEN/TR 15760-2010 | 2010-10-01 | English | Heat meters - Checklist documenting the relationship between the Directive 2004/22/EC (MID) and EN 1434:2007 |
394 | DS DS/EN ISO 10873-2010 | 2010-10-01 | English | Dentistry - Denture adhesives |
395 | DS DS/CEN ISO/TR 16178-2010 | 2010-10-01 | English | Footwear - Critical substances potentially present in footwear and footwear components |
396 | DS DS/EN ISO 13680-2010 | 2010-10-01 | English | Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions |
397 | DS DS/EN 60598-2-20/Corr. sep. 2010-2010 | 2010-10-01 | English | Luminaires - Part 2-20: Particular requirements - Lighting chains |
398 | DS DS/ISO/IEC 19793/Corr. 1-2010 | 2010-10-01 | English | Information technology - Open Distributed Processing - Use of UML for ODP system specifications |
399 | DS DS/EN ISO 21457-2010 | 2010-10-01 | English | Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems |
400 | DS DS/EN 62271-101/A1-2010 | 2010-09-30 | English | High-voltage switchgear and controlgear - Part 101: Synthetic testing |
401 | DS DS/HD 639 S1/A2-2010 | 2010-09-30 | English | Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) |
402 | DS DS/EN 459-1-2010 | 2010-09-30 | English | Building lime - Part 1: Definitions, specifications and conformity criteria |
403 | DS DS/EN 459-2-2010 | 2010-09-30 | English | Building lime - Part 2: Test methods |
404 | DS DS/CEN/TS 15639-2010 | 2010-09-29 | English | Solid recovered fuels - Determination of mechanical durability of pellets |
405 | DS DS/CEN/TR 15404-2010 | 2010-09-29 | English | Solid recovered fuels - Methods for the determination of ash melting behaviour by using characteristic temperatures |
406 | DS DS/ISO 11005-2010 | 2010-09-29 | English | Technical product documentation - Use of main documents |
407 | DS DS/EN 60027-7-2010 | 2010-09-29 | English | Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution |
408 | DS DS/CEN/TR 16017-2010 | 2010-09-29 | English | Guide to the use of EN 598 |
409 | DS DS/EN ISO 8029-2010 | 2010-09-29 | English | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification |
410 | DS DS/CEN/TS 15405-2010 | 2010-09-29 | English | Solid recovered fuels - Determination of density of pellets and briquettes |
411 | DS DS/EN 61190-1-3/A1-2010 | 2010-09-29 | English | Attachment materials for electronic assembly - Part 1-3: Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications |
412 | DS DS/EN 15767-3-2010 | 2010-09-29 | English | Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable monitors - Part 3: Foam devices |
413 | DS DS/EN 61784-3-13-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13 |
414 | DS DS/EN 61784-3-3-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 |
415 | DS DS/EN 61784-3-12-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 |
416 | DS DS/EN 61784-3-2-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 |
417 | DS DS/CLC/TR 62541-1-2010 | 2010-09-29 | English | OPC unified architecture - Part 1: Overview and concepts |
418 | DS DS/EN 61784-3-14-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 |
419 | DS DS/CLC/TR 62541-2-2010 | 2010-09-29 | English | OPC unified architecture - Part 2: Security model |
420 | DS DS/EN 61784-3-6-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 |
421 | DS DS/EN 61784-3-1-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
422 | DS DS/EN 61784-3-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
423 | DS DS/EN 61784-3-8-2010 | 2010-09-29 | English | Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 |
424 | DS DS/IEC 61892-1-2010 | 2010-09-28 | English | Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions |
425 | DS DS/IEC 61892-5-2010 | 2010-09-28 | English | Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units |
426 | DS DS/EN 12629-5-2 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |
427 | DS DS/EN 12629-4 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 4:Concrete roof tile making machines |
428 | DS DS/EN 12629-6 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products |
429 | DS DS/EN 12629-2 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machines |
430 | DS DS/EN 12629-5-1 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
431 | DS DS/EN 60749-19/A1-2010 | 2010-09-27 | English | Semiconductor devices - Mechanical and climatic test methods - Part 19: Die shear strength |
432 | DS DS/EN 12629-7 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobile equipment for long line manufacture of prestressed products |
433 | DS DS/EN 12629-5-3 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines |
434 | DS DS/EN ISO 8362-2-2010 | 2010-09-27 | English | Injection containers and accessories - Part 2: Closures for injection vials |
435 | DS DS/EN 60749-32/A1-2010 | 2010-09-27 | English | Semiconductor devices - Mechanical and climatic test methods - Part 32: Flammability of plastic-encapsulated devices (externally induced) |
436 | DS DS/EN 12629-5-4 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines |
437 | DS DS/EN 12629-8 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 8: Machines and equipment for the manufacture of constructional products from calcium-silicate (and concrete) |
438 | DS DS/EN 1014-1-2010 | 2010-09-27 | English | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 1: Procedure for sampling creosote |
439 | DS DS/EN 12629-1 + A1-2010 | 2010-09-27 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
440 | DS DS/EN 62490-1-2010 | 2010-09-27 | English | ESL measuring method - Part 1: Capacitors with lead terminal for use in electronic equipment |
441 | DS DS/EN 1014-2-2010 | 2010-09-27 | English | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis |
442 | DS DS 10001-2010 | 2010-09-27 | Danish | Health management in organisations - Requirements for integrated management systems including health promotion and prevention of lifestyle diseases |
443 | DS DS/EN 1014-3-2010 | 2010-09-27 | English | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3: Determination of the benzo(a)pyrene content of creosote |
444 | DS DS/EN 62490-2-2010 | 2010-09-27 | English | ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment |
445 | DS DS/EN 1014-4-2010 | 2010-09-27 | English | Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote |
446 | DS DS/EN 60539-2/A1-2010 | 2010-09-27 | English | Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors |
447 | DS DS/ISO 8216-1-2010 | 2010-09-27 | English | Petroleum products - Fuels (class F) classification - Part 1: Categories of marine fuels |
448 | DS DS/ISO 8217-2010 | 2010-09-27 | English | Petroleum products - Fuels (class F) - Specifications of marine fuels |
449 | DS DS/EN ISO 11609-2010 | 2010-09-27 | English | Dentistry - Dentifrices - Requirements, test methods and marking |
450 | DS DS/EN ISO 20361/AC-2010 | 2010-09-22 | English | Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy |
451 | DS DS/EN 14139-2010 | 2010-09-22 | English | Ophthalmic optics - Specifications for ready-to-wear spectacles |
452 | DS DS/EN ISO 5457/A1-2010 | 2010-09-22 | English | Technical product documentation - Sizes and layout of drawing sheets |
453 | DS DS/ISO/IEC 25045-2010 | 2010-09-22 | English | Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Evaluation module for recoverability |
454 | DS DS/EN ISO 25178-701-2010 | 2010-09-22 | English | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments |
455 | DS DS/ISO 8443-2010 | 2010-09-22 | English | Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions |
456 | DS DS/EN ISO 25178-601-2010 | 2010-09-22 | English | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments |
457 | DS DS/CEN/TR 13930/AC-2010 | 2010-09-22 | English | Rotodynamic pumps - Design of pump intakes - Recommendations for installation of pumps |
458 | DS DS/EN ISO/IEC 15423-2010 | 2010-09-22 | English | Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing |
459 | DS DS/ISO 113-2010 | 2010-09-22 | English | Rolling bearings - Plummer block housings - Boundary dimensions |
460 | DS DS/ISO/IEC 29124-2010 | 2010-09-22 | English | Information technology - Programming languages, their environments and system software interfaces - Extensions to the C++ Library to support mathematical special functions |
461 | DS DS/EN 1247 + A1-2010 | 2010-09-22 | English | Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting machines, continuous and semi continuous casting machines |
462 | DS DS/ISO/TS 128-71-2010 | 2010-09-22 | English | Technical product documentation (TPD) - General principles of presentation - Part 71: Simplified representation for mechanical engineering drawings |
463 | DS DS/ISO/IEC TR 24774-2010 | 2010-09-22 | English | Systems and software engineering - Life cycle management - Guidelines for process description |
464 | DS DS/EN 809 + A1/AC-2010 | 2010-09-22 | English | Pumps and pump units for liquids - Common safety requirements |
465 | DS DS/CEN/TR 13931/AC-2010 | 2010-09-22 | English | Rotodynamic pumps - Forces and moments on flanges - Centrifugal, mixed flow and axial flow horizontal and vertical shafts pumps |
466 | DS DS/EN 558/AC-2010 | 2010-09-21 | English | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
467 | DS DS/EN 55020/IS2-2010 | 2010-09-21 | English | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement - Interpretation of Clause I.7 |
468 | DS DS/EN 14638-3-2010 | 2010-09-21 | English | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 3: Welded carbon steel cylinders made to a design justified by experimental methods |
469 | DS DS/ISO 29990-2010 | 2010-09-21 | English | Learning services for non-formal education and training - Basic requirements for service providers |
470 | DS DS/EN 15312 + A1-2010 | 2010-09-21 | English | Free access multi-sports equipment - Requirements, including safety and test methods |
471 | DS DS/CWA 16180-3-2010 | 2010-09-21 | English | The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain - Part 3: Standards Landscape |
472 | DS DS/CWA 16180-2-2010 | 2010-09-21 | English | The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain - Part 2: Implementation Guide |
473 | DS DS/CWA 16180-1-2010 | 2010-09-21 | English | The CEN ORCHID Roadmap Standardising Information Across the Plant Engineering Supply Chain - Part 1: Direction and Framework |
474 | DS DS/EN 61935-2-2010 | 2010-09-21 | English | Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards |
475 | DS DS/EN 15900-2010 | 2010-09-21 | Danish, English | Energy efficiency services - Definitions and requirements |
476 | DS DS/EN 12629-3 + A1-2010 | 2010-09-21 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 3: Slide and turntable machines |
477 | DS DS/EN 61975-2010 | 2010-09-21 | English | High-voltage direct current (HVDC) installations - System tests |
478 | DS DS/EN 13623-2010 | 2010-09-21 | English | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1) |
479 | DS DS/EN 60335-2-40/Corr.-2010 | 2010-09-17 | English | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
480 | DS DS/EN 60335-2-89/Corr.-2010 | 2010-09-17 | English | Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor |
481 | DS DS/EN 60335-2-24/Corr.-2010 | 2010-09-17 | English | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers |
482 | DS DS/EN 300392-3-1 V1.3.1-2010 | 2010-09-16 | English | Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 1: General design |
483 | DS DS/EN 300392-2 V3.4.1-2010 | 2010-09-16 | English | Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 2: Air Interface (AI) |
484 | DS DS/EN 61558-2-8-2010 | 2010-09-16 | English | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes |
485 | DS DS/EN 300392-3-4 V1.3.1-2010 | 2010-09-16 | English | Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 4: Additional Network Feature Short Data Service (ANF-ISISDS) |
486 | DS DS/EN 302574-2 V1.1.1-2010 | 2010-09-16 | English | Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 2: User Equipment (UE) for wide |
487 | DS DS/EN 300440-2 V1.4.1-2010 | 2010-09-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
488 | DS DS/EN 300396-6 V1.4.1-2010 | 2010-09-16 | English | Terrestrial Trunked Radio (TETRA); Direct Mode Operation (DMO); Part 6: Security |
489 | DS DS/EN 300392-5 V2.2.1-2010 | 2010-09-16 | English | Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D) and Direct Mode Operation (DMO); Part 5: Peripheral Equipment Interface (PEI) |
490 | DS DS/EN 300392-3-2 V1.4.1-2010 | 2010-09-16 | English | Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 2: Additional Network Feature Individual Call (ANF-ISIIC) |
491 | DS DS/EN 301783-2 V1.2.1-2010 | 2010-09-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
492 | DS DS/EN 302217-2-2 V1.4.1-2010 | 2010-09-16 | English | Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Digital systems operating in frequency bands where frequency co-ordination is applied; Harmonized EN covering the essential requirements of article |
493 | DS DS/EN 301783-1 V1.2.1-2010 | 2010-09-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Commercially available amateur radio equipment; Part 1: Technical characteristics and methods of mea |
494 | DS DS/EN 302574-1 V1.1.1-2010 | 2010-09-16 | English | Satellite Earth Stations and Systems (SES); Harmonized Standard for satellite earth stations for MSS operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands; Part 1: Complementary Ground Compone |
495 | DS DS/EN 301442 V1.2.1-2010 | 2010-09-16 | English | Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), including handheld earth stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz bands under the Mobile Satellite Service (MSS) covering es |
496 | DS DS/EN 300676-1 V1.5.1-2010 | 2010-09-16 | English | Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1:Technical characteristics and methods of measurement |
497 | DS DS/EN 303213-1 V1.2.1-2010 | 2010-09-16 | English | Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 1: Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004 for A-SMGCS Level 1 including external interfaces |
498 | DS DS/CLC/TS 50238-3-2010 | 2010-09-16 | English | Railway applications - Compatibility between rolling stock and train detection systems - Part 3: Compatibility with axle counters |
499 | DS DS/EN 300440-1 V1.6.1-2010 | 2010-09-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods |
500 | DS DS/CLC/TS 50238-2-2010 | 2010-09-16 | English | Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits |
|