Pos | standard Number | publication date | Language | Description |
1 | DS DS/EN 13508-2 + A1-2011 | 2011-07-04 | English | Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system |
2 | DS DS/EN 61753-141-2-2011 | 2011-07-04 | English | Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2: Fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments |
3 | DS DS/EN 60400/A1-2011 | 2011-07-04 | English | Lampholders for tubular fluorescent lamps and starterholders |
4 | DS DS/ISO/IEC TR 18047-3-2011 | 2011-07-04 | English | Information technology - Radio frequency identification device conformance test methods - Part 3: Test methods for air interface communications at 13,56 MHz |
5 | DS DS/IEC/TR 62669-2011 | 2011-07-04 | English | Case studies supporting IEC 62232 - Determination of RF field strength and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure |
6 | DS DS/EN 61184/A1-2011 | 2011-07-04 | English | Bayonet lampholders |
7 | DS DS/EN 50173-1-2011 | 2011-07-01 | English | Information technology - Generic cabling systems - Part 1: General requirements |
8 | DS DS/ISO 14005-2011 | 2011-06-30 | English | Environmental management systems - Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation |
9 | DS DS/EN 1997-2 + AC-2011 | 2011-06-29 | Danish, English | Eurocode 7 - Geotechnical design - Part 2: Ground investigation and testing |
10 | DS DS/CEN/TS 16187-2011 | 2011-06-29 | English | Foodstuffs - Determination of fumonisin B1 and fumonisin B2 in processed maize containing foods for infants and young children - HPLC method with immunoaffinity column cleanup and fluorescence detection after precolumn derivatization |
11 | DS DS/EN 12101-7-2011 | 2011-06-29 | English | Smoke and heat control systems - Part 7: Smoke duct sections |
12 | DS DS/EN 12101-8-2011 | 2011-06-29 | English | Smoke and heat control systems - Part 8: Smoke control dampers |
13 | DS DS/EN ISO 17637-2011 | 2011-06-29 | Danish, English | Non-destructive testing of welds - Visual testing of fusion-welded joints |
14 | DS DS/ISO/IEC 9797-2-2011 | 2011-06-28 | English | Information technology - Security techniques - Message Authentication Codes (MACs) - Part 2: Mechanisms using a dedicated hash-function |
15 | DS DS/EN 50536-2011 | 2011-06-28 | English | Protection against lightning - Thunderstorm warning systems |
16 | DS DS/EN ISO 6947-2011 | 2011-06-28 | Danish, English | Welding and allied processes - Welding positions |
17 | DS DS/ISO 50001-2011 | 2011-06-28 | English | Energy management systems - Requirements with guidance for use |
18 | DS DS/EN 61804-3-2011 | 2011-06-27 | English | Function Blocks (FB) for process control - Part 3: Electronic Device Description Language (EDDL) |
19 | DS DS/EN 772-16-2011 | 2011-06-27 | English | Methods of test for masonry units - Part 16: Determination of dimensions |
20 | DS DS/EN 772-1-2011 | 2011-06-27 | English | Methods of test for masonry units - Part 1: Determination of compressive strength |
21 | DS DS/EN 772-11-2011 | 2011-06-27 | English | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay |
22 | DS DS/EN 772-21-2011 | 2011-06-27 | English | Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption |
23 | DS DS/EN 772-18-2011 | 2011-06-27 | English | Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units |
24 | DS DS/EN ISO 3759-2011 | 2011-06-27 | English | Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
25 | DS DS/EN 771-3-2011 | 2011-06-27 | English | Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) |
26 | DS DS/EN 771-6-2011 | 2011-06-27 | English | Specification for masonry units - Part 6: Natural stone masonry units |
27 | DS DS/EN 771-5-2011 | 2011-06-27 | English | Specification for masonry units - Part 5: Manufactured stone masonry units |
28 | DS DS/EN 771-4-2011 | 2011-06-27 | English | Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units |
29 | DS DS/EN 771-2-2011 | 2011-06-27 | English | Specification for masonry units - Part 2: Calcium silicate masonry units |
30 | DS DS/EN 61236-2011 | 2011-06-27 | English | Live working - Saddles, stick clamps and their accessories |
31 | DS DS/EN 771-1-2011 | 2011-06-27 | English | Specification for masonry units - Part 1: Clay masonry units |
32 | DS DS/EN 60601-2-52/AC-2011 | 2011-06-27 | English | Medical electrical equipment - Part 2-52: Particular requirements for basic safety and essential performance of medical beds |
33 | DS DS/EN 60534-2-1-2011 | 2011-06-27 | English | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
34 | DS DS/EN 50525-2-12-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads |
35 | DS DS/EN 50525-2-21-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation |
36 | DS DS/EN 50525-2-22-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation |
37 | DS DS/EN 50525-1-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements |
38 | DS DS/EN 50525-2-11-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation |
39 | DS DS/EN 1239-2011 | 2011-06-24 | English | Adhesives - Freeze-thaw stability |
40 | DS DS/EN 1965-1-2011 | 2011-06-24 | English | Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate |
41 | DS DS/EN 1245-2011 | 2011-06-24 | English | Adhesives - Determination of pH |
42 | DS DS/EN 1243-2011 | 2011-06-24 | English | Adhesives - Determination of free formaldehyde in amino and amidoformaldehyde condensates |
43 | DS DS/EN 1240-2011 | 2011-06-24 | English | Adhesives - Determination of hydroxyl value and/or hydroxyl content |
44 | DS DS/EN ISO 1518-1-2011 | 2011-06-24 | English | Paints and varnishes - Determination of scratch resistance - Part 1: Constant-loading method |
45 | DS DS/EN 1238-2011 | 2011-06-24 | English | Adhesives - Determination of the softening point of thermoplastic adhesives (ring and ball) |
46 | DS DS/EN 12962-2011 | 2011-06-24 | English | Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index) |
47 | DS DS/EN 1965-2-2011 | 2011-06-24 | English | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
48 | DS DS/EN 14869-1-2011 | 2011-06-24 | English | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders |
49 | DS DS/EN ISO 8394-2/AC-2011 | 2011-06-24 | English | Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus |
50 | DS DS/EN 12705-2011 | 2011-06-24 | English | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
51 | DS DS/EN 14869-2-2011 | 2011-06-24 | English | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test |
52 | DS DS/ISO 11709-2011 | 2011-06-24 | English | Soil quality - Determination of selected coal-tar-derived phenolic compounds using high performance liquid chromatography (HPLC) |
53 | DS DS/EN 50525-2-31-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation |
54 | DS DS/EN 50525-2-41-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation |
55 | DS DS/EN 50525-2-42-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation |
56 | DS DS/EN 50525-2-51-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation |
57 | DS DS/EN 50525-2-71-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation |
58 | DS DS/EN 50525-2-72-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation |
59 | DS DS/EN 50525-2-81-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding |
60 | DS DS/EN 50525-2-82-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains |
61 | DS DS/CWA 16308-2011 | 2011-06-24 | English | Framework for consumer rental conditions |
62 | DS DS/EN 50525-2-83-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation |
63 | DS DS/EN 50525-3-11-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke |
64 | DS DS/EN 50525-3-21-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke |
65 | DS DS/EN 50525-3-31-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke |
66 | DS DS/EN 50525-3-41-2011 | 2011-06-24 | English | Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke |
67 | DS DS/CEN/TR 16130-2011 | 2011-06-24 | English | Characterization of waste - On-site verification |
68 | DS DS/EN 12464-1-2011 | 2011-06-24 | English | Light and lighting - Lighting of work places - Part 1: Indoor work places |
69 | DS DS/EN ISO 10769-2011 | 2011-06-23 | English | Clay geosynthetic barriers - Determination of water absorption of bentonite |
70 | DS DS/EN 13647-2011 | 2011-06-23 | English | Wood flooring and wood panelling and cladding - Determination of geometrical characteristics |
71 | DS DS/EN 320-2011 | 2011-06-23 | English | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
72 | DS DS/EN 13241-1 + A1-2011 | 2011-06-23 | English | Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics |
73 | DS DS/EN 13353 + A1-2011 | 2011-06-23 | English | Solid wood panels (SWP) - Requirements |
74 | DS DS/EN 13228-2011 | 2011-06-23 | English | Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system |
75 | DS DS/EN 15595 + A1-2011 | 2011-06-22 | English | Railway applications - Braking - Wheel slide protection |
76 | DS DS/EN ISO 11664-5-2011 | 2011-06-22 | English | Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u, v uniform chromaticity scale diagram |
77 | DS DS/EN 2240-061-2011 | 2011-06-22 | English | Aerospace series - Lamps, incandescent - Part 061: Lamp, code 1683 - Product standard |
78 | DS DS/EN ISO 11664-1-2011 | 2011-06-22 | English | Colorimetry - Part 1: CIE standard colorimetric observers |
79 | DS DS/ISO/TS 12417-2011 | 2011-06-22 | English | Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products |
80 | DS DS/EN 15220-1 + A1-2011 | 2011-06-22 | English | Railway applications - Brake indicators - Part 1: Pneumatically operated brake indicators |
81 | DS DS/EN ISO 11664-4-2011 | 2011-06-22 | English | Colorimetry - Part 4: CIE 1976 L*a*b* Colour space |
82 | DS DS/EN 2240-062-2011 | 2011-06-22 | English | Aerospace series - Lamps, incandescent - Part 062: Lamp, code 1810 - Product standard |
83 | DS DS/EN ISO 29601-2011 | 2011-06-22 | English | Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film |
84 | DS DS/EN ISO 11664-2-2011 | 2011-06-22 | English | Colorimetry - Part 2: CIE standard illuminants |
85 | DS DS/EN 2240-064-2011 | 2011-06-22 | English | Aerospace series - Lamps, incandescent - Part 064: Lamp, code 1819 - Product standard |
86 | DS DS/EN ISO 7439-2011 | 2011-06-22 | English | Copper-bearing contraceptive intrauterine devices - Requirements and tests |
87 | DS DS/EN 14535-1 + A1-2011 | 2011-06-22 | English | Railway applications - Brake discs for railway rolling stock - Part 1: Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
88 | DS DS/EN 2240-065-2011 | 2011-06-22 | English | Aerospace series - Lamps, incandescent - Part 065: Lamp, code 1820 - Product standard |
89 | DS DS/EN 2240-063-2011 | 2011-06-22 | English | Aerospace series - Lamps, incandescent - Part 063: Lamp, code 1815 - Product standard |
90 | DS DS/EN ISO 19334-2011 | 2011-06-22 | English | Binders for paints and varnishes - Gum rosin - Gas-chromatographic analysis |
91 | DS DS/CEN/TS 16198-2011 | 2011-06-21 | English | Fertilizers - Determination of magnesium by complexometry |
92 | DS DS/CEN/TS 16199-2011 | 2011-06-21 | English | Fertilizers - Determination of the sodium extracted by flame-emission spectrometry |
93 | DS DS/EN ISO 9875/AC-2011 | 2011-06-21 | English | Ships and marine technology - Marine echo-sounding equipment |
94 | DS DS/EN 14894-2011 | 2011-06-21 | English | LPG equipment and accessories - Cylinder and drum marking |
95 | DS DS/CEN ISO/TS 17575-4-2011 | 2011-06-21 | English | Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming |
96 | DS DS/CEN ISO/TS 17575-3-2011 | 2011-06-21 | English | Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data |
97 | DS DS/CEN ISO/TS 13143-1-2011 | 2011-06-21 | English | Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes |
98 | DS DS/CEN ISO/TS 13140-1-2011 | 2011-06-21 | English | Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes |
99 | DS DS/ISO 11057-2011 | 2011-06-21 | English | Air quality - Test method for filtration characterization of cleanable filter media |
100 | DS DS/EN 71-1-2011 | 2011-06-21 | English | Safety of toys - Part 1: Mechanical and physical properties |
101 | DS DS/ISO 23269-3-2011 | 2011-06-21 | English | Ships and marine technology - Breathing apparatus for ships - Part 3: Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes |
102 | DS DS/EN 15980-2011 | 2011-06-21 | English | Air quality - Determination of the deposition of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenz[a,h]anthracene and indeno[1,2,3-cd]pyrene |
103 | DS DS/CEN/TS 16195-2011 | 2011-06-21 | English | Fertilizers - Determination of chlorides in the absence of organic material |
104 | DS DS/EN ISO 15792-3-2011 | 2011-06-21 | English | Welding consumables - Test methods - Part 3: Classification testing of positional capacity and root penetration of welding consumables in a fillet weld |
105 | DS DS/CEN/TS 16197-2011 | 2011-06-21 | English | Fertilizers - Determination of magnesium by atomic absorption spectrometry |
106 | DS DS/CEN/TS 16196-2011 | 2011-06-21 | English | Fertilizers - Manganimetric determination of extracted calcium following precipitation in the form of oxalate |
107 | DS DS/EN 413-1/ZA-2011 | 2011-06-17 | Danish, English | Masonry cement - Part 1: Composition, specifications and conformity criteria |
108 | DS DS/EN 459-1/ZA-2011 | 2011-06-17 | Danish, English | Building lime - Part 1: Definitions, specifications and conformity criteria |
109 | DS DS/EN ISO 28927-10-2011 | 2011-06-16 | English | Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers |
110 | DS DS/EN 15895-2011 | 2011-06-16 | English | Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools |
111 | DS DS/EN ISO 23908-2011 | 2011-06-15 | English | Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling |
112 | DS DS/EN 60357/A3-2011 | 2011-06-15 | English | Tungsten halogen lamps (non-vehicle) - Performance specifications |
113 | DS DS/EN 1366-10-2011 | 2011-06-15 | English | Fire resistance tests for service installations - Part 10: Smoke control dampers |
114 | DS DS/EN ISO 22413-2011 | 2011-06-15 | English | Transfer sets for pharmaceutical preparations - Requirements and test methods |
115 | DS DS/EN 527-1-2011 | 2011-06-15 | English | Office furniture - Work tables and desks - Part 1: Dimensions |
116 | DS DS/EN 61169-41-2011 | 2011-06-15 | English | Radio-frequency connectors - Part 41: Sectional specification for CQA series quick lock R.F. coaxial connectors |
117 | DS DS/EN 60838-1/A2-2011 | 2011-06-15 | English | Miscellaneous lampholders - Part 1: General requirements and tests |
118 | DS DS/EN 60512-26-100/A1-2011 | 2011-06-15 | English | Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g |
119 | DS DS/EN 413-1-2011 | 2011-06-15 | English | Masonry cement - Part 1: Composition, specifications and conformity criteria |
120 | DS DS/EN 653-2011 | 2011-06-15 | English | Resilient floor coverings - Expanded (cushioned) polyvinyl chloride floor coverings - Specification |
121 | DS DS/EN 15185-2011 | 2011-06-15 | English | Furniture - Assessment of the surface resistance to abrasion |
122 | DS DS/EN 15269-10-2011 | 2011-06-15 | English | Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies including their elements of building hardware - Part 10: Fire resistance of steel rolling shutter assemblies |
123 | DS DS-håndbog 134.1.1-2011 | 2011-06-15 | Danish | Concrete - Part 1.1: Concrete technology - DS/EN 206-1, DS/EN 206-9 and DS 2426 |
124 | DS DS/EN 686-2011 | 2011-06-14 | English | Resilient floor coverings - Specification for plain and decorative linoleum on a foam backing |
125 | DS DS/EN 15976-2011 | 2011-06-14 | English | Flexible sheets for waterproofing - Determination of emissivity |
126 | DS DS/EN 13420-2011 | 2011-06-14 | English | Windows - Behaviour between different climates - Test method |
127 | DS DS/EN 60099-8-2011 | 2011-06-14 | English | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
128 | DS DS/EN ISO 20884-2011 | 2011-06-14 | English | Petroleum products - Determination of sulfur content of automotive fuels - Wavelength-dispersive X-ray fluorescence spectrometry |
129 | DS DS/EN 654-2011 | 2011-06-14 | English | Resilient floor coverings - Semi-flexible polyvinyl chloride tiles - Specification |
130 | DS DS/EN 688-2011 | 2011-06-14 | English | Resilient floor coverings - Specification for corklinoleum |
131 | DS DS/EN 687-2011 | 2011-06-14 | English | Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing |
132 | DS DS/EN 655-2011 | 2011-06-14 | English | Resilient floor coverings - Tiles of agglomerated composition cork with polyvinyl chloride wear layer - Specification |
133 | DS DS/EN 1591-1 + A1/AC-2011 | 2011-06-13 | English | Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
134 | DS DS/EN ISO 4018-2011 | 2011-06-13 | English | Hexagon head screws - Product grade C |
135 | DS DS/EN 60679-6-2011 | 2011-06-13 | English | Quartz crystal controlled oscillators of assessed quality - Part 6: Phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines |
136 | DS DS/EN 60519-6-2011 | 2011-06-13 | English | Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment |
137 | DS DS/CEN/TS 16137-2011 | 2011-06-13 | English | Plastics - Determination of bio-based carbon content |
138 | DS DS/CLC/TR 60269-5-2011 | 2011-06-13 | English | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
139 | DS DS/EN 15943-2011 | 2011-06-13 | English | Curriculum Exchange Format (CEF) - Data model |
140 | DS DS/EN 62374-1/AC-2011 | 2011-06-13 | English | Semiconductor devices - Part 1: Time-dependent dielectric breakdown (TDDB) test for inter-metal layers |
141 | DS DS/EN ISO 4017-2011 | 2011-06-13 | English | Hexagon head screws - Product grades A and B |
142 | DS DS/EN 60191-6-17-2011 | 2011-06-13 | English | Mechanical standardization of semiconductor devices - Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball grid array and fine-pitch land gr |
143 | DS DS/EN 1846-1-2011 | 2011-06-13 | English | Firefighting and rescue service vehicles - Nomenclature and designation |
144 | DS DS/EN ISO 28721-2-2011 | 2011-06-13 | English | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 2: Designation and specification of resistance to chemical attack and thermal shock |
145 | DS DS/EN ISO 28721-3-2011 | 2011-06-13 | English | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance |
146 | DS DS/EN ISO 28721-1-2011 | 2011-06-13 | English | Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories |
147 | DS DS/CEN ISO/TR 9241-100-2011 | 2011-06-10 | English | Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics |
148 | DS DS/CEN ISO/TR 7250-2-2011 | 2011-06-10 | English | Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations |
149 | DS DS/CEN ISO/TR 22411-2011 | 2011-06-10 | English | Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities |
150 | DS DS/IEC GUIDE 107-2011 | 2011-06-10 | English | Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications |
151 | DS DS/EN ISO 25139-2011 | 2011-06-10 | English | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography |
152 | DS DS/CEN/TS 16115-1-2011 | 2011-06-10 | English | Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses |
153 | DS DS/EN 16024-2011 | 2011-06-10 | English | Fertilizers - Determination of 1H-1,2,4-triazole in urea and in fertilizers containing urea - Method using high-performance liquid chromatography (HPLC) |
154 | DS DS/EN 50518-2/AC-2011 | 2011-06-10 | English | Monitoring and alarm receiving centre - Part 2: Technical requirements |
155 | DS DS/EN ISO 10927-2011 | 2011-06-09 | English | Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) |
156 | DS DS/EN 50399-2011 | 2011-06-09 | English | Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results |
157 | DS DS/CEN/TS 15901-13-2011 | 2011-06-08 | English | Road and airfield surface characteristics - Part 13: Procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO): the Odoliograph |
158 | DS DS/EN ISO 12781-1-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness |
159 | DS DS/EN ISO 12780-2-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators |
160 | DS DS/EN ISO 12780-1-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness |
161 | DS DS/CEN/TS 15901-11-2011 | 2011-06-08 | English | Road and airfield surface characteristics - Part 11: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR): the SRM |
162 | DS DS/CEN/TS 15901-12-2011 | 2011-06-08 | English | Road and airfield surface characteristics - Part 12: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip: the BV 11 and Saab friction tester (SFT) |
163 | DS DS/EN ISO 12781-2-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators |
164 | DS DS/EN ISO 14534-2011 | 2011-06-08 | English | Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements |
165 | DS DS/EN ISO 8362-6-2011 | 2011-06-08 | English | Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials |
166 | DS DS/EN ISO 9908/A1-2011 | 2011-06-08 | English | Technical specifications for centrifugal pumps - Class III - Amendment 1 |
167 | DS DS/EN 12846-1-2011 | 2011-06-08 | English | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 1: Bituminous emulsions |
168 | DS DS/ISO 21751-2011 | 2011-06-08 | English | Plastics pipes and fittings - Decohesion test of electrofusion assemblies - Strip-bend test |
169 | DS DS/EN 13614-2011 | 2011-06-08 | English | Bitumen and bituminous binders - Determination of adhesivity of bituminous emulsions by water immersion test |
170 | DS DS/EN ISO 9905/A1-2011 | 2011-06-08 | English | Technical specifications for centrifugal pumps - Class I - Amendment 1 |
171 | DS DS/EN ISO 12180-2-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators |
172 | DS DS/EN ISO 12180-1-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form |
173 | DS DS/EN 12846-2-2011 | 2011-06-08 | English | Bitumen and bituminous binders - Determination of efflux time by the efflux viscometer - Part 2: Cut-back and fluxed bituminous binders |
174 | DS DS/EN ISO 12181-2-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators |
175 | DS DS/EN 13074-1-2011 | 2011-06-08 | English | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 1: Recovery by evaporation |
176 | DS DS/EN ISO 12181-1-2011 | 2011-06-08 | English | Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness |
177 | DS DS/EN ISO 5364-2011 | 2011-06-07 | English | Anaesthetic and respiratory equipment - Oropharyngeal airways |
178 | DS DS/EN ISO 14253-2-2011 | 2011-06-07 | English | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
179 | DS DS/ISO/IEC 14443-3-2011 | 2011-06-07 | English | Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision |
180 | DS DS/EN ISO 25378-2011 | 2011-06-07 | English | Geometrical product specifications (GPS) - Characteristics and conditions - Definitions |
181 | DS DS/EN ISO 14253-3-2011 | 2011-06-07 | English | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
182 | DS DS/EN ISO 80601-2-12-2011 | 2011-06-07 | English | Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators |
183 | DS DS/EN ISO 15883-6-2011 | 2011-06-07 | English | Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, non-critical medical devices and healthcare equipment |
184 | DS DS/EN 50556-2011 | 2011-06-07 | English | Road traffic signal systems |
185 | DS DS/EN 10164-2011 | 2011-06-07 | Danish, English | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
186 | DS DS/EN 15984-2011 | 2011-06-07 | English | Petroleum industry and products - Determination of composition of refinery heating gas and calculation of carbon content and calorific value - Gas chromatography method |
187 | DS DS/EN 14154-2 + A2-2011 | 2011-06-06 | English | Water meters - Part 2: Installation and conditions of use |
188 | DS DS/EN 61936-1/AC-2011 | 2011-06-06 | English | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
189 | DS DS/EN 14154-3 + A2-2011 | 2011-06-06 | English | Water meters - Part 3: Test methods and equipment |
190 | DS DS/ISO 27065-2011 | 2011-06-06 | English | Protective clothing - Performance requirements for protective clothing worn by operators applying liquid pesticides |
191 | DS DS/CWA 16266-2011 | 2011-06-05 | English | Curriculum for training ICT Professionals in Universal Design |
192 | DS DS/EN ISO 28763-2011 | 2011-06-05 | English | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications |
193 | DS DS/EN 60601-2-57-2011 | 2011-06-05 | English | Medical electrical equipment - Part 2-57: Particular requirements for the basic safety and essential performance of non-laser light source equipment intended for therapeutic, diagnostic, monitoring and cosmetic/aesthetic use |
194 | DS DS/EN ISO 7048-2011 | 2011-06-05 | English | Cross-recessed cheese head screws |
195 | DS DS/EN ISO 14584-2011 | 2011-06-05 | English | Hexalobular socket raised countersunk head screws |
196 | DS DS/EN ISO 14583-2011 | 2011-06-05 | English | Hexalobular socket pan head screws |
197 | DS DS/EN ISO 14580-2011 | 2011-06-05 | English | Hexalobular socket cheese head screws |
198 | DS DS/EN ISO 14579-2011 | 2011-06-05 | English | Hexalobular socket head cap screws |
199 | DS DS/EN ISO 10510-2011 | 2011-06-05 | English | Tapping screw and washer assemblies with plain washers |
200 | DS DS/EN ISO 10350-2-2011 | 2011-06-05 | English | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics |
201 | DS DS/EN ISO 8676-2011 | 2011-06-05 | English | Hexagon head screws with metric fine pitch thread - Product grades A and B |
202 | DS DS/EN 61810-2-1-2011 | 2011-06-05 | English | Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10 values |
203 | DS DS/EN 61810-2-2011 | 2011-06-05 | English | Electromechanical elementary relays - Part 2: Reliability |
204 | DS DS/EN 12829-2011 | 2011-06-05 | English | Surface active agents - Preparation of water with known calcium and magnesium hardness |
205 | DS DS/EN 12808-4/AC-2011 | 2011-06-05 | English | Grouts for tiles - Part 4: Determination of shrinkage |
206 | DS DS/EN 972 + A1/AC-2011 | 2011-06-05 | English | Tannery machines - Reciprocating roller machines - Safety requirements |
207 | DS DS/EN ISO 15015-2011 | 2011-06-05 | English | Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods |
208 | DS DS/EN ISO 28764-2011 | 2011-06-05 | English | Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron |
209 | DS DS/EN ISO 28723-2011 | 2011-06-05 | English | Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
210 | DS DS/EN 61029-2-12-2011 | 2011-06-05 | English | Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements for threading machines |
211 | DS DS/EN 60255-22-5-2011 | 2011-06-05 | English | Measuring relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test |
212 | DS DS/EN ISO 28722-2011 | 2011-06-05 | English | Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture |
213 | DS DS/EN ISO 28765-2011 | 2011-06-05 | English | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
214 | DS DS/EN 60086-2-2011 | 2011-06-01 | English | Primary batteries - Part 2: Physical and electrical specifications |
215 | DS DS/EN 60456/A12-2011 | 2011-06-01 | English | Clothes washing machines for household use - Methods for measuring the performance |
216 | DS DS/EN 60086-1-2011 | 2011-06-01 | English | Primary batteries - Part 1: General |
217 | DS DS/EN 1630-2011 | 2011-06-01 | English | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts |
218 | DS DS/EN 1629-2011 | 2011-06-01 | English | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading |
219 | DS DS/EN 1628-2011 | 2011-06-01 | English | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading |
220 | DS DS/EN 1627-2011 | 2011-06-01 | English | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification |
221 | DS DS/ISO/IEC 27005-2011 | 2011-06-01 | English | Information technology - Security techniques - Information security risk management |
222 | DS DS/EN ISO 12967-1-2011 | 2011-06-01 | English | Health informatics - Service architecture - Part 1: Enterprise viewpoint (ISO 12967-1:2009) |
223 | DS DS/ISO 17359-2011 | 2011-06-01 | English | Condition monitoring and diagnostics of machines - General guidelines |
224 | DS DS/EN 60086-3-2011 | 2011-06-01 | English | Primary batteries - Part 3: Watch batteries |
225 | DS DS/EN ISO 5667-13-2011 | 2011-05-31 | English | Water quality - Sampling - Part 13: Guidance on sampling of sludges |
226 | DS DS/EN ISO 12967-2-2011 | 2011-05-31 | English | Health informatics - Service architecture - Part 2: Information viewpoint |
227 | DS DS/ISO 16175-2-2011 | 2011-05-31 | English | Information and documentation - Principles and functional requirements for records in electronic office environments - Part 2: Guidelines and functional requirements for digital records management systems |
228 | DS DS/EN ISO 12967-3-2011 | 2011-05-31 | English | Health informatics - Service architecture - Part 3: Computational viewpoint |
229 | DS DS/EN 302372-2 V1.2.1-2011 | 2011-05-30 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for Detection and Movement; Tanks Level Probing Radar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61 GHz and 77 GHz; Part 2: Harmoniz |
230 | DS DS/EN 303214 V1.1.1-2011 | 2011-05-30 | English | Data Link Services (DLS) System; Community Specification for application under the Single European Sky Interoperability Regulation EC 552/2004; Requirements for ground constituents and system testing |
231 | DS DS/EN 300338-5 V1.1.1-2011 | 2011-05-30 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for equipment for generation, ransmission and reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and/or VHF mobile ser |
232 | DS DS/EN 302372-1 V1.2.1-2011 | 2011-05-30 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Equipment for Detection and Movement; Tanks Level Probing Radar (TLPR) operating in the frequency bands 5,8 GHz, 10 GHz, 25 GHz, 61 GHz and 77 GHz; Part 1: Technica |
233 | DS DS/EN 302769 V1.2.1-2011 | 2011-05-30 | English | Digital Video Broadcasting (DVB); Frame structure channel coding and modulation for a second generation digital transmission system for cable systems (DVB-C2) |
234 | DS DS/IEC/TS 62504-2011 | 2011-05-30 | English | General lighting - LEDs and LED modules - Terms and definitions |
235 | DS DS/EN 300676-1 V1.5.2-2011 | 2011-05-30 | English | Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation; Part 1:Technical characteristics and methods of measurement |
236 | DS DS/EN 302755 V1.2.1-2011 | 2011-05-30 | English | Digital Video Broadcasting (DVB); Frame structure channel coding and modulation for a second generation digital terrestrial television broadcasting system (DVB-T2) |
237 | DS DS/EN 302686 V1.1.1-2011 | 2011-05-30 | English | Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz to 64 GHz frequency band; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive |
238 | DS DS/EN 300392-12-21 V1.4.4-2011 | 2011-05-30 | English | Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 12: Supplementary services stage 3; Sub-part 21: Ambience Listening (AL) |
239 | DS DS/EN 300373-1 V1.3.1-2011 | 2011-05-30 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 1: Technical characteristics and methods of measurement |
240 | DS DS/EN 60238/A2-2011 | 2011-05-30 | English | Edison screw lampholders |
241 | DS DS/EN 60130-9-2011 | 2011-05-27 | English | Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment |
242 | DS DS/EN 60352-8-2011 | 2011-05-27 | English | Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance |
243 | DS DS/EN 61300-3-22-2011 | 2011-05-27 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force |
244 | DS DS/EN 16084-2011 | 2011-05-27 | English | Refrigerating systems and heat pumps - Qualification of tightness of components and joints |
245 | DS DS/CLC/TS 60034-18-33-2011 | 2011-05-27 | English | Rotating electrical machines - Part 18-33: Functional evaluation of insulation systems - Test procedures for form-wound windings - Multifactor evaluation by endurance under simultaneous thermal and electrical stresses |
246 | DS DS/EN 60300-3-12-2011 | 2011-05-27 | English | Dependability management - Part 3-12: Application guide - Integrated logistic support |
247 | DS DS/EN 62459-2011 | 2011-05-27 | English | Sound system equipment - Electroacoustic transducers - Measurement of suspension parts |
248 | DS DS/EN 60974-4-2011 | 2011-05-27 | English | Arc welding equipment - Part 4: Periodic inspection and testing |
249 | DS DS/EN 61300-2-6-2011 | 2011-05-27 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism |
250 | DS DS/EN 62458-2011 | 2011-05-27 | English | Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters |
251 | DS DS/EN 50377-13-3-2011 | 2011-05-27 | English | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 13-3: Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule catego |
252 | DS DS/IEC/TR 61156-1-3-2011 | 2011-05-27 | English | Multicore and symmetrical pair/quad cables for digital communications - Part 1-3: Electrical transmission parameters for modelling cable assemblies using symmetrical pair/quad cables |
253 | DS DS/ISO/IEC 24724-2011 | 2011-05-27 | English | Information technology - Automatic identification and data capture techniques - GS1 DataBar bar code symbology specification |
254 | DS DS/ISO/IEC/IEEE 24765-2011 | 2011-05-27 | English | Systems and software engineering - Vocabulary |
255 | DS DS/EN 50377-4-4-2011 | 2011-05-27 | English | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-4: Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category |
256 | DS DS/EN 2825-2011 | 2011-05-24 | English | Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of smoke density |
257 | DS DS/EN 2757-2011 | 2011-05-24 | English | Aerospace series - Structural adhesives system - Test method - Determination of the drying and ignition residues of primers |
258 | DS DS/EN 3280-2011 | 2011-05-24 | English | Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification |
259 | DS DS/EN 2997-015-2011 | 2011-05-24 | English | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 015: Jam-nut mounted receptacle with integrated |
260 | DS DS/EN 2997-001-2011 | 2011-05-24 | English | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 001: Technical specification |
261 | DS DS/EN 4165-026-2011 | 2011-05-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 掳C continuous - Part 026: Accessories for single modules - Product standard |
262 | DS DS/EN 4165-024-2011 | 2011-05-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 掳C continuous - Part 024: Single module plug - Product standard |
263 | DS DS/EN 4160-2011 | 2011-05-24 | English | Aerospace series - Paints and varnishes - Determination of the effect of thermal exposure |
264 | DS DS/EN 3475-603-2011 | 2011-05-24 | English | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 603: Resistance to wet arc tracking |
265 | DS DS/EN 4641-301-2011 | 2011-05-24 | English | Aerospace series - Cables, optical 125 脦录m diameter cladding - Part 301: Tight structure 50/125 脗碌m GI fibre nominal 1,8 mm outside diameter - Product standard |
266 | DS DS/EN 4604-010-2011 | 2011-05-24 | English | Aerospace series - Cable, electrical, for signal transmission - Part 010: Cable, coaxial, light weight, 50 Ohms, 200 掳C, type KX (light WD) - Product standard |
267 | DS DS/EN 4604-009-2011 | 2011-05-24 | English | Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 掳C, type KW (light WN) - Product standard |
268 | DS DS/EN 4476-2011 | 2011-05-24 | English | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
269 | DS DS 3033-2011 | 2011-05-23 | Danish | Voluntary classification of the quality of the indoor climate in residential houses, schools, childrens day-care centres and offices |
270 | DS DS/EN 161-2011 | 2011-05-23 | English | Automatic shut-off valves for gas burners and gas appliances |
271 | DS DS/EN 88-1-2011 | 2011-05-23 | English | Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa |
272 | DS DS/EN 14154-1 + A2-2011 | 2011-05-23 | English | Water meters - Part 1: General requirements |
273 | DS DS/EN 15812-2011 | 2011-05-23 | English | Polymer modified bituminous thick coatings for waterproofing - Determination of crack bridging ability |
274 | DS DS/EN ISO 14713-1-2011 | 2011-05-23 | Danish, English | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance |
275 | DS DS/EN ISO 14713-2-2011 | 2011-05-23 | Danish, English | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing |
276 | DS DS/EN 15819-2011 | 2011-05-19 | English | Polymer modified bituminous thick coatings for waterproofing - Reduction of the thickness of the layer when fully dried |
277 | DS DS/EN 15820-2011 | 2011-05-19 | English | Polymer modified bituminous thick coatings for waterproofing - Determination of watertightness |
278 | DS DS/EN 15816-2011 | 2011-05-19 | English | Polymer-modified bituminous thick coatings for waterproofing - Resistance to rain |
279 | DS DS/EN 15817-2011 | 2011-05-19 | English | Polymer modified bituminous thick coatings for waterproofing - Water resistance |
280 | DS DS/EN 15815-2011 | 2011-05-19 | English | Polymer modified bituminous thick coatings for waterproofing - Resistance to compression |
281 | DS DS/EN 15813-2011 | 2011-05-19 | English | Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures |
282 | DS DS/EN 15818-2011 | 2011-05-19 | English | Polymer modified bituminous thick coatings for waterproofing - Determination of dimensional stability at high temperature |
283 | DS DS/EN 54-1-2011 | 2011-05-19 | English | Fire detection and fire alarm systems - Part 1: Introduction |
284 | DS DS/EN ISO 10893-7-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
285 | DS DS/EN ISO 10893-6-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
286 | DS DS/EN 62116-2011 | 2011-05-13 | English | Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters |
287 | DS DS/EN ISO 10893-5-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
288 | DS DS/EN ISO 10893-8-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
289 | DS DS/EN ISO 10893-12-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes |
290 | DS DS/CEN/TR 16151-2011 | 2011-05-13 | English | Water quality - Guidance on the design of Multimetric Indices |
291 | DS DS/IEC/TS 62332-1-2011 | 2011-05-13 | English | Electrical insulation systems (EIS) - Thermal evaluation of combined liquid and solid components - Part 1: General requirements |
292 | DS DS/EN ISO 10893-9-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
293 | DS DS/EN 50216-12-2011 | 2011-05-13 | English | Power transformer and reactor fittings - Part 12: Fans |
294 | DS DS/EN ISO 10893-11-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
295 | DS DS/EN ISO 10893-10-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
296 | DS DS/EN 60076-2-2011 | 2011-05-13 | English | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
297 | DS DS/EN ISO 10893-3-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections |
298 | DS DS/EN ISO 10893-2-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
299 | DS DS/EN ISO 10893-1-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness |
300 | DS DS/EN ISO 10893-4-2011 | 2011-05-13 | English | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
301 | DS DS-h氓ndbog 116.3.2-2011 | 2011-05-13 | Danish | Safety on machinery. Safety-related control systems. Validation - What does it mean? |
302 | DS DS/EN 60603-7-3-2011 | 2011-05-12 | English | Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz |
303 | DS DS/ISO 11783-5-2011 | 2011-05-12 | English | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5: Network management |
304 | DS DS/ISO 11783-13-2011 | 2011-05-12 | English | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 13: File server |
305 | DS DS/ISO 14223-1-2011 | 2011-05-12 | English | Radiofrequency identification of animals - Advanced transponders - Part 1: Air interface |
306 | DS DS/EN 60335-2-9/A13/AC-2011 | 2011-05-12 | English | Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances |
307 | DS DS/CEN/TR 16148-2011 | 2011-05-12 | English | Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees |
308 | DS DS/EN ISO 28439-2011 | 2011-05-12 | English | Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential electrical mobility analysing systems |
309 | DS DS/ISO/TS 24679-2011 | 2011-05-12 | English | Fire safety engineering - Performance of structures in fire |
310 | DS DS/ISO/IEC 20000-1-2011 | 2011-05-12 | English | Information technology - Service management - Part 1: Service management system requirements |
311 | DS DS/CEN/TR 16149-2011 | 2011-05-11 | English | Guidance Document for drafting CEN/TC 158 Standards |
312 | DS DS/EN 13341 + A1/ZA-2011 | 2011-05-10 | Danish, English | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements an |
313 | DS DS/INF 28560-2011 | 2011-05-10 | English | RFID in libraries |
314 | DS DS/EN 196-5-2011 | 2011-05-10 | English | Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement |
315 | DS DS/ISO/TS 22002-1-2011 | 2011-05-10 | Danish, English | Prerequisite programmes on food safety - Part 1: Food manufacturing |
316 | DS DS/EN 13001-2-2011 | 2011-05-10 | English | Crane safety - General design - Part 2: Load actions |
317 | DS DS/CEN/TS 81-11-2011 | 2011-05-10 | English | Safety rules for the construction and installation of lifts - Basics and interpretations - Part 11: Interpretations related to EN 81 family of standards |
318 | DS DS/EN ISO 1519-2011 | 2011-05-09 | English | Paints and varnishes - Bend test (cylindrical mandrel) |
319 | DS DS/EN 71-1 + A14-2011 | 2011-05-09 | English | Safety of toys - Part 1: Mechanical and physical properties |
320 | DS DS/EN ISO 80601-2-61-2011 | 2011-05-05 | English | Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment |
321 | DS DS/EN 50550-2011 | 2011-05-05 | English | Power frequency overvoltage protective device for household and similar applications (POP) |
322 | DS DS/EN 16140-2011 | 2011-05-05 | English | Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles |
323 | DS DS/EN 13979-1 + A2-2011 | 2011-05-05 | English | Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1: Forged and rolled wheels |
324 | DS DS/EN 15827-2011 | 2011-05-05 | English | Railway applications - Requirements for bogies and running gears |
325 | DS DS/EN 13262 + A2-2011 | 2011-05-05 | English | Railway applications - Wheelsets and bogies - Wheels - Product requirements |
326 | DS DS/EN 13749-2011 | 2011-05-05 | English | Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames |
327 | DS DS/EN 50363-0-2011 | 2011-05-04 | English | Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: General introduction |
328 | DS DS/EN 50396/A1-2011 | 2011-05-04 | English | Non electrical test methods for low voltage energy cables |
329 | DS DS/EN 50395/A1-2011 | 2011-05-04 | English | Electrical test methods for low voltage energy cables |
330 | DS DS/EN 50363-8/A1-2011 | 2011-05-04 | English | Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halogen-free, thermoplastic sheathing compounds |
331 | DS DS/EN 50363-6/A1-2011 | 2011-05-04 | English | Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halogen-free, cross-linked sheathing compounds |
332 | DS DS/EN 50363-3/A1-2011 | 2011-05-04 | English | Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC insulating compounds |
333 | DS DS/EN 50363-2-1/A1-2011 | 2011-05-04 | English | Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cross-linked elastomeric sheathing compounds |
334 | DS DS/EN 50363-5/A1-2011 | 2011-05-04 | English | Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halogen-free, cross-linked insulating compounds |
335 | DS DS/EN 16128-2011 | 2011-05-03 | English | Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin |
336 | DS DS/CLC/TR 50555/AC-2011 | 2011-05-03 | English | Interruption indexes |
337 | DS DS/EN 12413 + A1-2011 | 2011-05-03 | English | Safety requirements for bonded abrasive products |
338 | DS DS/EN ISO 12402-7/A1-2011 | 2011-05-03 | English | Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods |
339 | DS DS/EN ISO 12402-9/A1-2011 | 2011-05-03 | English | Personal flotation devices - Part 9: Test methods |
340 | DS DS/EN ISO 12402-8/A1-2011 | 2011-05-03 | English | Personal flotation devices - Part 8: Accessories - Safety requirements and test methods |
341 | DS DS/ISO 15-2011 | 2011-05-03 | English | Rolling bearings - Radial bearings - Boundary dimensions, general plan |
342 | DS DS/HD 60364-4-42-2011 | 2011-05-02 | English | Low voltage electrical installations - Part 4-42: Protection for safety - Protection against thermal effects |
343 | DS DS/EN 61058-2-5-2011 | 2011-05-02 | English | Switches for appliances - Part 2-5: Particular requirements for change-over selectors |
344 | DS DS/EN 13710-2011 | 2011-05-02 | English | European Ordering Rules - Ordering of characters from Latin, Greek, Cyrillic, Georgian and Armenian scripts |
345 | DS DS/EN 60749-23/A1-2011 | 2011-05-02 | English | Semiconductor devices - Mechanical and climatic test methods - Part 23: High temperature operating life |
346 | DS DS/EN 61881-1-2011 | 2011-05-02 | English | Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1: Paper/plastic film capacitors |
347 | DS DS/EN 60252-2-2011 | 2011-05-02 | English | AC motor capacitors - Part 2: Motor start capacitors |
348 | DS DS/EN 60349-1-2011 | 2011-05-02 | English | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors |
349 | DS DS/EN ISO 17234-2-2011 | 2011-05-02 | English | Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 2: Determination of 4-aminoazobenzene |
350 | DS DS/EN ISO 8765-2011 | 2011-05-02 | English | Hexagon head bolts with metric fine pitch thread - Product grades A and B |
351 | DS DS/EN ISO 4016-2011 | 2011-05-02 | English | Hexagon head bolts - Product grade C |
352 | DS DS/EN ISO 4014-2011 | 2011-05-02 | English | Hexagon head bolts - Product grades A and B |
353 | DS DS/EN ISO 3107-2011 | 2011-05-02 | English | Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements |
354 | DS DS/EN 62246-1-2011 | 2011-05-02 | English | Reed switches - Part 1: Generic specification |
355 | DS DS/ISO 28560-2-2011 | 2011-05-02 | English | Information and documentation - RFID in libraries - Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962 |
356 | DS DS/EN 60349-2-2011 | 2011-05-02 | English | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors |
357 | DS DS/ISO 28560-3-2011 | 2011-05-02 | English | Information and documentation - RFID in libraries - Part 3: Fixed length encoding |
358 | DS DS/EN 13074-2-2011 | 2011-05-02 | English | Bitumen and bituminous binders - Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders - Part 2: Stabilisation after recovery by evaporation |
359 | DS DS/ISO 28560-1-2011 | 2011-05-02 | English | Information and documentation - RFID in libraries - Part 1: Data elements and general guidelines for implementation |
360 | DS DS/EN 60601-2-45-2011 | 2011-04-29 | English | Medical electrical equipment - Part 2-45: Particular requirements for the basic safety and essential performance of mammographic X-ray equipment and mammographic stereotactic devices |
361 | DS DS/EN 62132-2-2011 | 2011-04-28 | English | Integrated circuits - Measurement of electromagnetic immunity - Part 2: Measurement of radiated immunity - TEM cell and wideband TEM cell method |
362 | DS DS/EN 60461-2011 | 2011-04-28 | English | Time and control code |
363 | DS DS/EN ISO 10748-2011 | 2011-04-28 | English | Footwear - Test method for slide fasteners - Slider locking strength |
364 | DS DS/EN 61753-131-3-2011 | 2011-04-28 | English | Fibre optic interconnecting devices and passive components - Performance standard - Part 131-3: Single-mode mechanical fibre splice for category U - Uncontrolled environment |
365 | DS DS/EN 60268-7-2011 | 2011-04-28 | English | Sound system equipment - Part 7: Headphones and earphones |
366 | DS DS/EN 60252-1-2011 | 2011-04-28 | English | AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation |
367 | DS DS/EN 15964-2011 | 2011-04-28 | English | Breath alcohol test devices other than single use devices - Requirements and test methods |
368 | DS DS/EN 10351-2011 | 2011-04-28 | English | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
369 | DS DS/EN 61300-2-17-2011 | 2011-04-28 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold |
370 | DS DS/EN ISO 544-2011 | 2011-04-27 | English | Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings |
371 | DS DS/EN 62489-2-2011 | 2011-04-27 | English | Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 2: Methods of calculating and measuring the low-frequency magnetic field emissions from the loop for assessing conformity with guidelines on limits for human exposure |
372 | DS DS/EN ISO 4254-5/AC-2011 | 2011-04-27 | English | Agricultural machinery - Safety - Part 5: Power-driven soil-working machines |
373 | DS DS/EN 1811-2011 | 2011-04-27 | English | Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin |
374 | DS DS 418-2011 | 2011-04-26 | Danish | Calculation of heat loss from buildings |
375 | DS DS/ISO 8607/Amd. 1-2011 | 2011-04-18 | English | Artificial insemination of animals - Frozen semen of breeding bulls - Enumeration of living aerobic microorganisms |
376 | DS DS/ISO 13926-2-2011 | 2011-04-18 | English | Pen systems - Part 2: Plunger stoppers for pen-injectors for medical use |
377 | DS DS/ISO 11040-2-2011 | 2011-04-18 | English | Prefilled syringes - Part 2: Plunger stoppers for dental local anaesthetic cartridges |
378 | DS DS-håndbog 168-2011 | 2011-04-18 | Danish, English | Maintenance |
379 | DS DS/EN 13795-2011 | 2011-04-18 | English | Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels |
380 | DS DS/ISO 14066-2011 | 2011-04-15 | English | Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams |
381 | DS DS/EN 1520-2011 | 2011-04-14 | English | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
382 | DS DS/CEN/TR 15642-2011 | 2011-04-14 | English | Unified tests procedures for the tests of EN 3-7:2004+A1:2007 |
383 | DS DS/IEC 60670-24-2011 | 2011-04-13 | English | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 24: Particular requirements for enclosures for housing protective devices and other power dissipating electrical equipment |
384 | DS DS/ISO 18292-2011 | 2011-04-13 | English | Energy performance of fenestration systems for residential buildings - Calculation procedure |
385 | DS DS/EN 1993-1-7 + AC-2011 | 2011-04-13 | Danish, English | Eurocode 3 - Design of steel structures - Part 1-7: Plated structures subject to out of plane loading |
386 | DS DS/EN 488-2011 | 2011-04-13 | English | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
387 | DS DS/CEN/TS 15945-2011 | 2011-04-13 | English | Packaging - Ease of opening - Criteria and test methods for evaluating consumer packaging |
388 | DS DS/EN 13598-1-2011 | 2011-04-12 | English | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
389 | DS DS-h忙fte 1-1:april 2011-2011 | 2011-04-12 | Danish | Standards and their relations to EEC directives - Low voltage equipment |
390 | DS DS/EN ISO 23993-2011 | 2011-04-12 | English | Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01) |
391 | DS DS/EN 15986-2011 | 2011-04-12 | English | Symbol for use in the labelling of medical devices - Requirements for labelling of medical devices containing phthalates |
392 | DS DS-h忙fte 1:april 2011-2011 | 2011-04-12 | Danish | Standards and their relations to EEC directives |
393 | DS DS/ISO/IEC 10373-8-2011 | 2011-04-12 | English | Identification cards - Test methods - Part 8: USB-ICC |
394 | DS DS/ISO/IEC 24727-5-2011 | 2011-04-12 | English | Identification cards - Integrated circuit card programming interfaces - Part 5: Testing procedures |
395 | DS DS/CEN/TR 852-2011 | 2011-04-12 | English | Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values |
396 | DS DS/EN 62271-206-2011 | 2011-04-12 | English | High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV |
397 | DS DS/EN 1794-2-2011 | 2011-04-12 | English | Road traffic noise reducing devices - Non-acoustic performance - Part 2: General safety and environmental requirements |
398 | DS DS/EN ISO 14341-2011 | 2011-04-12 | English | Welding consumables - Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels - Classification |
399 | DS DS/EN 1794-1-2011 | 2011-04-12 | English | Road traffic noise reducing devices - Non-acoustic performance - Part 1: Mechanical performance and stability requirements |
400 | DS DS/EN ISO 7263-2011 | 2011-04-12 | English | Corrugating medium - Determination of the flat crush resistance after laboratory fluting |
401 | DS DS/EN ISO 6145-5-2011 | 2011-04-11 | English | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices |
402 | DS DS/EN 61853-1-2011 | 2011-04-11 | English | Photovoltaic (PV) module performance testing and energy rating - Part 1: Irradiance and temperature performance measurements and power rating |
403 | DS DS/EN 15879-1-2011 | 2011-04-11 | English | Testing and rating of direct exchange ground coupled heat pumps with electrically driven compressors for space heating and/or cooling - Part 1: Direct exchange-to-water heat pumps |
404 | DS DS/EN 50342-5-2011 | 2011-04-11 | English | Lead-acid starter batteries - Part 5: Properties of battery housings and handles |
405 | DS DS/EN ISO 22868-2011 | 2011-04-08 | English | Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) |
406 | DS DS/EN 15975-1-2011 | 2011-04-08 | English | Security of drinking water supply - Guidelines for risk and crisis management - Part 1: Crisis management |
407 | DS DS/EN 13683 + A2-2011 | 2011-04-08 | English | Garden equipment - Integrally powered shredders/chippers - Safety |
408 | DS DS/EN 50518-3-2011 | 2011-04-08 | English | Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation |
409 | DS DS/ISO 16844-2-2011 | 2011-04-08 | English | Road vehicles - Tachograph systems - Part 2: Electrical interface with recording unit |
410 | DS DS/EN ISO 22434-2011 | 2011-04-08 | English | Transportable gas cylinders - Inspection and maintenance of cylinder valves |
411 | DS DS/ISO 28801-2011 | 2011-04-08 | English | Double sampling plans by attributes with minimal sample sizes, indexed by producers risk quality (PRQ) and consumers risk quality (CRQ) |
412 | DS DS/CEN/TR 16152-2011 | 2011-04-07 | English | Electronic fee collection - Personalisation and mounting of first mount OBE |
413 | DS DS/EN 13089-2011 | 2011-04-07 | English | Mountaineering equipment - Ice-tools - Safety requirements and test methods |
414 | DS DS/EN 15876-2-2011 | 2011-04-07 | English | Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite |
415 | DS DS/EN 50090-1-2011 | 2011-04-06 | English | Home and Building Electronic Systems (HBES) - Part 1: Standardization structure |
416 | DS DS/CEN/TR 16142-2011 | 2011-04-06 | English | Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment |
417 | DS DS/EN 50423-3/Corr. Oct. 2010-2011 | 2011-04-06 | English | Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 3: Set of National Normative Aspects |
418 | DS DS/EN 61558-2-12-2011 | 2011-04-06 | English | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
419 | DS DS/CLC/TS 50238-2/Corr. Feb. 2011-2011 | 2011-04-06 | English | Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits |
420 | DS DS/EN 50341-3/Corr. Oct. 2010-2011 | 2011-04-06 | English | Overhead electrical lines exceeding AC 45 kV - Part 3: Set of National Normative Aspects |
421 | DS DS/ISO/IEC 10646-2011 | 2011-04-06 | English | Information technology - Universal Coded Character Set (UCS) |
422 | DS DS/EN 61558-2-20-2011 | 2011-04-06 | English | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors |
423 | DS DS/ISO/IEC 18046-2-2011 | 2011-04-06 | English | Information technology - Radio frequency identification device performance test methods - Part 2: Test methods for interrogator performance |
424 | DS DS/IEC/PAS 62707-1-2011 | 2011-04-06 | English | LED - Binning - Part 1: General requirements and white grid |
425 | DS DS/ISO/IEC 19761-2011 | 2011-04-06 | English | Software engineering - COSMIC: a functional size measurement method |
426 | DS DS/EN 61558-2-9-2011 | 2011-04-06 | English | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps for tungsten filament lamps |
427 | DS DS/EN 61770/Corr. Mar. 2011-2011 | 2011-04-06 | English | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
428 | DS DS/EN 60335-2-21/Corr. Oct. 2010-2011 | 2011-04-05 | English | Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters |
429 | DS DS/EN 60745-1/A11-2011 | 2011-04-05 | English | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
430 | DS DS/EN 548-2011 | 2011-04-05 | English | Resilient floor coverings - Specification for plain and decorative linoleum |
431 | DS DS/CLC/TS 50206-3-2011 | 2011-04-05 | English | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 3: Interface between pantograph and rolling stock for rail vehicles |
432 | DS DS/EN 60335-2-25/A11-2011 | 2011-04-05 | English | Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens |
433 | DS DS/EN 60745-2-16-2011 | 2011-04-05 | English | Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for tackers |
434 | DS DS/EN 649-2011 | 2011-04-05 | English | Resilient floor coverings - Homogenous and heterogenous polyvinyl chloride floor coverings - Specification |
435 | DS DS/EN 651-2011 | 2011-04-05 | English | Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification |
436 | DS DS/EN 652-2011 | 2011-04-05 | English | Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification |
437 | DS DS/ISO 26422-2011 | 2011-04-05 | English | Petroleum and related products - Determination of shear stability of lubricating oils containing polymers - Method using a tapered roller bearing |
438 | DS DS/ISO 8217/Corr. 1-2011 | 2011-04-05 | English | Petroleum products - Fuels (class F) - Specifications of marine fuels |
439 | DS DS/EN 15442-2011 | 2011-04-04 | English | Solid recovered fuels - Methods for sampling |
440 | DS DS/EN 15357-2011 | 2011-04-04 | English | Solid recovered fuels - Terminology, definitions and descriptions |
441 | DS DS/EN 15973-2011 | 2011-04-04 | English | Rubber- or plastic-coated fabrics - Upholstery fabrics - Resistance to soiling |
442 | DS DS/EN 15443-2011 | 2011-04-04 | English | Solid recovered fuels - Methods for the preparation of the laboratory sample |
443 | DS DS/EN 15440-2011 | 2011-04-04 | English | Solid recovered fuels - Methods for the determination of biomass content |
444 | DS DS/EN 15414-3-2011 | 2011-04-04 | English | Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample |
445 | DS DS/EN 15408-2011 | 2011-04-04 | English | Solid recovered fuels - Methods for the determination of sulphur (S), chlorine (Cl), fluorine (F) and bromine (Br) content |
446 | DS DS/EN 15407-2011 | 2011-04-04 | English | Solid recovered fuels - Methods for the determination of carbon (C), hydrogen (H) and nitrogen (N) content |
447 | DS DS/EN 15403-2011 | 2011-04-04 | English | Solid recovered fuels - Determination of ash content |
448 | DS DS/EN 15402-2011 | 2011-04-04 | English | Solid recovered fuels - Determination of the content of volatile matter |
449 | DS DS/EN 15400-2011 | 2011-04-04 | English | Solid recovered fuels - Determination of calorific value |
450 | DS DS/EN 14961-5-2011 | 2011-04-04 | English | Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use |
451 | DS DS/EN 15234-1-2011 | 2011-04-04 | English | Solid biofuels - Fuel quality assurance - Part 1: General requirements |
452 | DS DS/EN 15358-2011 | 2011-04-04 | English | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
453 | DS DS/CEN ISO/TR 10400-2011 | 2011-04-04 | English | Petroleum and natural gas industries - Equations and calculations for the properties of casing, tubing, drill pipe and line pipe used as casing or tubing |
454 | DS DS/EN ISO 4787-2011 | 2011-04-01 | English | Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use |
455 | DS DS/EN ISO 3381-2011 | 2011-04-01 | English | Railway applications - Acoustics - Measurement of noise inside railbound vehicles |
456 | DS DS/EN ISO/IEC 17021-2011 | 2011-04-01 | Danish, English | Conformity assessment - Requirements for bodies providing audit and certification of management systems |
457 | DS DS/ISO/IEC 9797-1-2011 | 2011-03-31 | English | Information technology - Security techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms using a block cipher |
458 | DS DS/CEN ISO/TS 11133-2/A1-2011 | 2011-03-31 | English | Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 2: Practical guidelines on performance testing of culture media |
459 | DS DS/ISO/IEC 18033-1/Amd 1-2011 | 2011-03-31 | English | Information technology - Security techniques - Encryption algorithms - Part 1: General |
460 | DS DS/EN ISO 5667-23-2011 | 2011-03-31 | English | Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters |
461 | DS DS/EN 61169-19-2011 | 2011-03-30 | English | Radio-frequency connectors - Part 19: Sectional specification - Radio frequency coaxial connectors of type SSMB |
462 | DS DS/EN ISO 2106-2011 | 2011-03-30 | English | Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method |
463 | DS DS/EN 62561-4-2011 | 2011-03-30 | English | Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners |
464 | DS DS/EN 61169-18-2011 | 2011-03-30 | English | Radio-frequency connectors - Part 18: Sectional specification - Radio frequency coaxial connectors of type SSMA |
465 | DS DS/EN 62496-4-2011 | 2011-03-30 | English | Optical circuit boards - Part 4: Interface standards - General and guidance |
466 | DS DS/EN 62496-2-2-2011 | 2011-03-30 | English | Optical circuit boards - Part 2-2: Measurements - Dimensions of optical circuit boards |
467 | DS DS/EN 61746-1-2011 | 2011-03-30 | English | Calibration of optical time-domain reflectometers (OTDR) - Part 1: OTDR for single-mode fibres |
468 | DS DS/EN 60204-33-2011 | 2011-03-30 | English | Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semiconductor fabrication equipment |
469 | DS DS/EN ISO 8994-2011 | 2011-03-30 | English | Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method |
470 | DS DS/EN 624-2011 | 2011-03-30 | English | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
471 | DS DS/EN 62305-3-2011 | 2011-03-30 | English | Protection against lightning - Part 3: Physical damage to structures and life hazard |
472 | DS DS/CWA 16267-2011 | 2011-03-30 | English | Guidelines for Sustainable Development of Historic and Cultural Cities - Qualicities |
473 | DS DS/EN ISO 11925-2/AC-2011 | 2011-03-30 | English | Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test |
474 | DS DS/EN 50174-1/A1-2011 | 2011-03-30 | English | Information technology - Cabling installation - Part 1: Installation specification and quality assurance |
475 | DS DS/EN 15037-2 + A1-2011 | 2011-03-30 | English | Precast concrete products - Beam-and-block floor systems - Part 2: Concrete blocks |
476 | DS DS/EN 15643-2-2011 | 2011-03-30 | English | Sustainability of construction works - Assessment of buildings - Part 2: Framework for the assessment of environmental performance |
477 | DS DS/EN 61966-12-1-2011 | 2011-03-30 | English | Multimedia systems and equipment - Colour measurement and management - Part 12-1: Metadata for identification of colour gamut (Gamut ID) |
478 | DS DS/EN 15037-3 + A1-2011 | 2011-03-30 | English | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
479 | DS DS/ISO/IEC 25010-2011 | 2011-03-30 | English | Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - System and software quality models |
480 | DS DS/EN 15080-12-2011 | 2011-03-30 | English | Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls |
481 | DS DS/EN 61300-2-23-2011 | 2011-03-30 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices |
482 | DS DS/EN 61850-7-3-2011 | 2011-03-29 | English | Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes |
483 | DS DS/EN 1113 + A1-2011 | 2011-03-29 | English | Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
484 | DS DS/EN 60950-1/A12-2011 | 2011-03-29 | English | Information technology equipment - Safety -- Part 1: General requirements |
485 | DS DS/EN 80001-1-2011 | 2011-03-29 | English | Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and activities |
486 | DS DS/ISO 23269-1-2011 | 2011-03-29 | English | Ships and marine technology - Breathing apparatus for ships - Part 1: Emergency escape breathing devices (EEBD) for shipboard use |
487 | DS DS/CEN/TR 16092-2011 | 2011-03-29 | English | Electronic fee collection - Requirements for pre-payment systems |
488 | DS DS/EN ISO 5264-2-2011 | 2011-03-29 | English | Pulps - Laboratory beating - Part 2: PFI mill method |
489 | DS DS/EN 1748-1-2/ZA-2011 | 2011-03-29 | Danish, English | Glass in building - Special basic products - Borosilicate glasses - Part 1-2: Evaluation of conformity/Product standard |
490 | DS DS/EN ISO 12966-2-2011 | 2011-03-29 | English | Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 2: Preparation of methyl esters of fatty acids |
491 | DS DS/EN 60745-2-5-2011 | 2011-03-29 | English | Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws |
492 | DS DS/EN 60065/A12-2011 | 2011-03-29 | English | Audio, video and similar electronic apparatus - Safety requirements |
493 | DS DS/EN 61558-2-23-2011 | 2011-03-29 | English | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites |
494 | DS DS/EN 14276-2 + A1-2011 | 2011-03-29 | English | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
495 | DS DS/EN 14276-1 + A1-2011 | 2011-03-29 | English | Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements |
496 | DS DS/ISO 30006-2011 | 2011-03-28 | English | Ship recycling management systems - Diagrams to show the location of hazardous materials onboard ships |
497 | DS DS/EN ISO 9015-1-2011 | 2011-03-28 | English | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
498 | DS DS/ISO 22742-2011 | 2011-03-28 | English | Packaging - Linear bar code and two-dimensional symbols for product packaging |
499 | DS DS/CEN ISO/TS 14907-1/AC-2011 | 2011-03-28 | English | Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures |
500 | DS DS/EN ISO 9015-2-2011 | 2011-03-28 | English | Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints |
|