Pos | standard Number | publication date | Language | Description |
1 | DS DS/INSTA 513-1987 | 1987-01-01 | English, Swedish | Flexible intermediate bulk containers - Standard duty re-usable FIBCs |
2 | DS DS/INSTA 150-1987 | 1987-01-01 | Danish | Security glazings - Heavy body impact testing |
3 | DS DS 2301-1-1987 | 1987-01-01 | Danish | Graphic symbols - Pictograms for information of the public - Part 1: Prohibitions, instructions, etc. |
4 | DS DS 2148.1-1987 | 1987-01-01 | Danish | Antistatic footwear - Inspection |
5 | DS DS/IEC 581-7-1987 | 1987-01-01 | English, French | High fidelity audio equipment and systems - Minimum performance requirements - Part 7: Loudspeakers |
6 | DS DS/IEC 581-10-1987 | 1987-01-01 | English, French | High fidelity audio equipment and systems - Minimum performance requirements - Part 10: Headphones |
7 | DS DS/IEC 512-6-1987 | 1987-01-01 | English, French | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 6: Climatic tests and soldering tests |
8 | DS DS/INSTA 151-1987 | 1987-01-01 | Danish | Security glazings - Hard body impact testing |
9 | DS DS/INSTA 152-1987 | 1987-01-01 | Danish | Security glazings - Sharp body impact testing |
10 | DS DS/INSTA 154-1987 | 1987-01-01 | Danish | Security glazings and safety glazings - Classification of resistance |
11 | DS DS/INSTA 510-1987 | 1987-01-01 | English, Swedish | Flexible intermediate bulk containers - Scope of inspection and terminology |
12 | DS DS/INSTA 511-1987 | 1987-01-01 | Danish, English | Flexible intermediate bulk containers - General guidelines for handling etc. |
13 | DS DS/INSTA 512-1987 | 1987-01-01 | English, Swedish | Flexible intermediate bulk containers - Heavy duty multitrip FIBCs |
14 | DS DS/INSTA 515-1987 | 1987-01-01 | English, Swedish | Flexible intermediate bulk containers - Standard duty single-trip pallet borne FIBCs |
15 | DS DS/INSTA 516-1987 | 1987-01-01 | English, Swedish | Flexible intermediate bulk containers - Cyclic top lift performance, methods of test |
16 | DS DS 1102-1987 | 1987-01-01 | Danish | Installations in building - Calculation of installation spaces for pipelines |
17 | DS DS/ISO 8768-1987 | 1987-01-01 | English | Packaging - Complete filled transport packages - Toppling test. |
18 | DS DS/ISO 9036-1987 | 1987-01-01 | English | Information processing - Arabic 7-bit coded character set for information interchange |
19 | DS DS/IEC 455-2-2-1987 | 1987-01-01 | English, French | Specification for solventless polymerisable resinous compounds used for electrical insulation - Part 2: Methods of test - Test methods for coating powders for electrical purposes |
20 | DS DS/ISO 6590/2-1987 | 1987-01-01 | Danish, English, French | Packaging - Sacks - Vocabulary and types - Part 2: Sacks made from thermoplastic flexible film |
21 | DS DS/ISO 8474-1987 | 1987-01-01 | English | Packaging - Complete, filled transport packages - Water immersion test |
22 | DS DS/ISO 6591/2-1987 | 1987-01-01 | English | Packaging - Sacks - Description and method of measurement - Part 2: Empty sacks made from thermoplastic flexible film |
23 | DS DS 1132-3-1987 | 1987-01-01 | English | Wall components - Resistance to impact from a soft body |
24 | DS DS/ISO 2206-1987 | 1987-01-01 | English | Packaging - Complete, filled transport packages - Identification of parts when testing |
25 | DS DS/IEC 244-10-1987 | 1987-01-01 | English, French | Methods of measurement for radio transmitters - Part 10: Methods of measurements for television transmitters and transposers employing insertion test signals |
26 | DS DS/INSTA 517-1987 | 1987-01-01 | English, Swedish | Flexible intermediate bulk containers - Compression resistance test |
27 | DS DS 2339-1987 | 1987-01-01 | Danish, English | Classification of requirements on manufacturing documents |
28 | DS DS 1133-1987 | 1987-01-01 | English | Roof components - Resistance to impact from a soft body |
29 | DS DS/ISO 7436-1986 | 1986-01-01 | Danish | Slotted set screws with cup point |
30 | DS DS/ISO 7435-1986 | 1986-01-01 | Danish | Slotted set screws with large dog point |
31 | DS DS/ISO 7434-1986 | 1986-01-01 | Danish | Slotted set screws with cone point |
32 | DS DS 1055-1986 | 1986-01-01 | Danish | Fire classification of small chimneys |
33 | DS DS 198.4-1986 | 1986-01-01 | Danish | Symbols on maps 1:100-1:10 000 - Part 4: Supply systems |
34 | DS DS/ISO 3856/7-1986 | 1986-01-01 | English | Paints and varnishes - Determination of "soluble" metal content - Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints - Flameless atomic absorption spectrometric method |
35 | DS DS/ISO 5676-1986 | 1986-01-01 | Danish | Tractors and machinery for agriculture and forestry - Hydraulic coupling - Braking circuit |
36 | DS DS 364.2-1986 | 1986-01-01 | Danish | Pallets - Repair of pallets 800 mm x 600 mm |
37 | DS DS 2031-1986 | 1986-01-01 | Danish | Packaging - Requirements for signs and goods information on shelf fronts in shops |
38 | DS DS/ISO 2248-1986 | 1986-01-01 | English | Packaging - Complete, filled transport packages - Vertical impact test by dropping |
39 | DS DS/IEC 767-1986 | 1986-01-01 | English, French | Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type beta format |
40 | DS DS/ISO 4543-1986 | 1986-01-01 | English | Metallic and other non-organic coatings - General rules for corrosion tests applicable for storage conditions |
41 | DS DS/ISO 4541-1986 | 1986-01-01 | English | Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) |
42 | DS DS/ISO 4520-1986 | 1986-01-01 | English | Chromate conversion coatings on electroplated zinc and cadmium coatings |
43 | DS DS/ISO 4519-1986 | 1986-01-01 | English | Electrodeposited metallic coating and related finishes - Sampling procedures for inspection by attributes |
44 | DS DS/ISO 7720-1986 | 1986-01-01 | Danish | Prevailing torque type all-metal hexagon nuts, style 2 - Property class 9 |
45 | DS DS/IEC 118-5-1986 | 1986-01-01 | English, French | Hearing aids - Part 5: Nipples for insert earphones |
46 | DS DS/IEC 115-7-1-1986 | 1986-01-01 | English, French | Fixed resistors for use in electronic equipment - Part 7: Blank detail specification: Fixed resistor networks in which not all resistors are individually measurable - Assessment level E |
47 | DS DS/IEC 115-7-1986 | 1986-01-01 | English, French | Fixed resistors for use in electronic equipment - Part 7: Sectional specification: Fixed resistor networks in which not all resistors are individually measurable |
48 | DS DS/ISO 1392-1986 | 1986-01-01 | English | Determination of crystallizing point - General method |
49 | DS DS 797-1986 | 1986-01-01 | Danish | Acoustics - Assessment of occupational noise exposure for hearing conservation purposes |
50 | DS DS 6044-1986 | 1986-01-01 | Danish | Agricultural machinery - Mast and zone of clearance for A-frame coupling of implements, category 2 |
51 | DS DS/IEC 115-6-2-1986 | 1986-01-01 | English, French | Fixed resistors for use in electronic equipment - Part 6: Blank detail specification: Fixed resistor networks with individually measurable resistors, of either different resistance values or different rated dissipations |
52 | DS DS/IEC 115-6-1-1986 | 1986-01-01 | English, French | Fixed resistors for use in electronic equipment - Part 6: Blank detail specification: Fixed resistor network with individually measurable resistors, all of equal value and equal dissipation |
53 | DS DS/IEC 68-2-49-1986 | 1986-01-01 | English, French | Basic environmental testing procedures - Part 2: Tests - Guidance to Test Kc: Sulphur dioxide test for contacts and connections |
54 | DS DS 56-1986 | 1986-01-01 | Danish | Technical drawings - Representation of screws and nuts |
55 | DS DS/ISO 6123/3-1986 | 1986-01-01 | English | Rubber- or platic-covered rollers - Specifications - Part 3: Dimensional tolerances |
56 | DS DS/INF 22/46-1986 | 1986-01-01 | Danish | Comparative testing of consumer products and related services - General principles |
57 | DS DS/ISO 7724/3-1986 | 1986-01-01 | English | Paints and varnishes - Colorimetry - Part 3: Calculations of colour differences |
58 | DS DS/ISO 7724/2-1986 | 1986-01-01 | English | Paints and varnishes - Colorimetry - Part 2: Colour measurement |
59 | DS DS/ISO 7724/1-1986 | 1986-01-01 | English | Paints and varnishes - Colorimetry - Part 1: Principles |
60 | DS DS/ISO 8323-1986 | 1986-01-01 | English | Freight containers - Air/surface (intermodal) general purpose containers - Specification and tests |
61 | DS DS 1064.6-1986 | 1986-01-01 | Danish | Fire protecting doors - Non-tested - BD-doors 30 |
62 | DS DS/ISO 5696-1986 | 1986-01-01 | English | Trailed agricultural vehicles - Brakes and braking devices - Laboratory test method |
63 | DS DS 1064.10-1986 | 1986-01-01 | Danish | Fire protecting doors - Non-tested F-doors 30, wood |
64 | DS DS 1064.11-1986 | 1986-01-01 | Danish | Fire protecting doors - Non-tested F-doors 30, steel |
65 | DS DS/IEC 554-3-5-1986 | 1986-01-01 | English, French | Specification for cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 5: Special papers |
66 | DS DS/ISO 8016-1986 | 1986-01-01 | Danish | Machinery for agriculture - Wheels with integral hub |
67 | DS DS/ISO 8048-1986 | 1986-01-01 | English, Swedish | Technical drawings - Construction drawings - Representation of views, sections and cuts |
68 | DS DS/ISO 8269-1986 | 1986-01-01 | English | Doorsets - Static loading test |
69 | DS DS/ISO 758-1986 | 1986-01-01 | English | Liquid chemical products for industrial use - Determination of density at 20 Centigrades |
70 | DS DS/ISO 918-1986 | 1986-01-01 | English | Volatile organic liquids for industrial use - Determination af distillation characteristics |
71 | DS DS/ISO 2876-1986 | 1986-01-01 | English | Packaging - Complete, filled transport packages - Rolling test |
72 | DS DS 2201-1986 | 1986-01-01 | Danish | Water quality - Chlorophyll a - Spectrophotometric determination in ethanol extract |
73 | DS DS 437-1986 | 1986-01-01 | Danish | Dansk Ingeniørforenings Code of Practice for the laying underground rigid pipelines of concrete, etc. |
74 | DS DS/ISO 5690/2-1986 | 1986-01-01 | English | Equipment for distributing fertilizers - Test methods - Part 2: Fertilizer distributors in lines |
75 | DS DS 430-1986 | 1986-01-01 | Danish | Dansk Ingeniørforenings Code of Practice for the laying of underground flexible pipelines of plastics |
76 | DS DS 421-1986 | 1986-01-01 | Danish | Dansk Ingeniørforenings Code of Practice for flexible, water-tight joints for pipe-lines of concrete, etc. |
77 | DS DS 1064.3-1986 | 1986-01-01 | Danish | Fire protecting doors - Non-tested BD-doors 60 |
78 | DS DS/INSTA 410-1986 | 1986-01-01 | English | Fire tests - Building products - Ignitability |
79 | DS DS/INSTA 411-1986 | 1986-01-01 | English | Fire tests - Coverings - Fire protection ability |
80 | DS DS/INSTA 412-1986 | 1986-01-01 | English | Fire tests - Building products - Heat release and smoke generation |
81 | DS DS/INSTA 413-1986 | 1986-01-01 | English | Fire tests - Roofings - Fire spread |
82 | DS DS/INSTA 414-1986 | 1986-01-01 | English | Fire tests - Floorings - Fire spread and smoke generation |
83 | DS DS/INSTA 440-1986 | 1986-01-01 | Danish, English | Flexible materials - Code for stating of reeling direction and print orientation |
84 | DS DS/ISO 6925-1985 | 1985-01-01 | English | Textile floor coverings - Burning behaviour - Tablet test at ambient temperature |
85 | DS DS 455-1985 | 1985-01-01 | Danish | Dansk Ingeniørforenings Code of Practice for impenetrability of underground sewer systems |
86 | DS DS/IEC 554-3-2-1985 | 1985-01-01 | English, French | Specification for cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Capacitor paper |
87 | DS DS 1064.1-1985 | 1985-01-01 | Danish | Fire protecting doors, not fire tested BS-doors |
88 | DS DS/ISO 4067/2-1985 | 1985-01-01 | English | Building and civil engineering drawings - Installations - Part 2: Simplified representation of sanitary appliances |
89 | DS DS/IEC 581-5-1985 | 1985-01-01 | English, French | High fidelity audio equipment and systems - Minimum performance requirements - Part 5: Microphones |
90 | DS DS 1052.2-1985 | 1985-01-01 | Danish | Fire resistance of doors - Classification |
91 | DS DS/ISO 6591/1-1985 | 1985-01-01 | English | Packaging - Sacks - Description and method of measurement - Part 1: Empty paper sacks |
92 | DS DS/ISO 7965/1-1985 | 1985-01-01 | English | Packaging - Sacks - Drop test - Part 1: Paper sacks |
93 | DS DS 1064.2-1985 | 1985-01-01 | Danish | Fire protecting doors, not fire tested BS-doors |
94 | DS DS/ISO 4190/6-1985 | 1985-01-01 | English | Lifts and service lifts (USA: elevators and dumbwaiters) - Part 6: Passenger lifts to be installed in residential buildings - Planning and selection |
95 | DS DS 443-1985 | 1985-01-01 | Danish | Dansk Ingeniørforenings Code of Practice for gas pipes of HDPE and MDPE |
96 | DS DS/ISO 7379-1985 | 1985-01-01 | Danish | Hexagon socket head shoulder screws |
97 | DS DS 1127-1985 | 1985-01-01 | Norwegian | Method of exposure of building components and building materials to accelerated climatic strains in a vertical position |
98 | DS DS/ISO 5670-1985 | 1985-01-01 | English | Agricultural trailers - Single-acting telescopic tipping cylinders - 25 MPa (250) bar) series - Types 1, 2 and 3 - Interchangeability dimensions |
99 | DS DS 258-1985 | 1985-01-01 | Danish | Determination of metal in water, sludge and sediment by atomic absorption in flame - Special guidelines for sodium and potassium |
100 | DS DS 1126.7-1985 | 1985-01-01 | Danish, English | Joints in building - Laboratory method of test for air permeability of joints |
101 | DS DS/ISO 1161-1985 | 1985-01-01 | English | Series 1 freight containers - Corner fittings - Specification |
102 | DS DS 198.3-1985 | 1985-01-01 | Danish | Symbols on maps 1:100-1:10 000 - Transportation systems |
103 | DS DS 198.2-1985 | 1985-01-01 | Danish | Symbols on maps 1:100-1:10 000 - Part 2: Topographical maps |
104 | DS DS 198.1-1985 | 1985-01-01 | Danish | Symbols on maps 1:100-1:10 000 - Part 1: Index |
105 | DS DS/ISO 3394-1985 | 1985-01-01 | English | Dimensions of rigid rectangular packages - Transport packages |
106 | DS DS 198.0-1985 | 1985-01-01 | Danish | Symbols on maps 1:100 - 1:10 000 - Part 0: Introduction and general rules |
107 | DS DS/ISO 6353-1-1985 | 1985-01-01 | English | Reagents for chemical analysis - Part 1: General test methods |
108 | DS DS/IEC 122-2-1985 | 1985-01-01 | English, French | Quartz crystal units for frequency control and selection - Part 2: Guide to the use of quartz crystal units for frequency control and selection |
109 | DS DS 1032-1985 | 1985-01-01 | Danish | Soot doors for masonry chimneys |
110 | DS DS/INF 30-1985 | 1985-01-01 | English | Packaging - Estimating the filled volume using the flat dimensions - Part 1: Paper sacks |
111 | DS DS 1052.1-1985 | 1985-01-01 | Danish | Fire resistance of building constructions - Classification |
112 | DS DS 6027-1985 | 1985-01-01 | Danish | Agricultural pallet box |
113 | DS DS 6041-1984 | 1984-01-01 | Danish | Agriculture - Pig houses - Vocabulary |
114 | DS DS 114-1984 | 1984-01-01 | Danish | Specification and usage of symbols for text correction |
115 | DS DS/INF 28-1984 | 1984-01-01 | Danish | Geometrical tolerances - Verification principles and methods for tolerances of form, orientation, location and runout - Guidelines |
116 | DS DS 6042-1984 | 1984-01-01 | Danish | Agricultural machinery - Cross shaft implement coupler, category 2 |
117 | DS DS/ISO 3270-1984 | 1984-01-01 | English | Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing |
118 | DS DS 1011.3-1984 | 1984-01-01 | Danish | Modular rules - Dimensioning of modular components |
119 | DS DS/ISO 4755-1984 | 1984-01-01 | Danish | Fasteners - Thread undercuts for external metric ISO thread |
120 | DS DS 423.32-1984 | 1984-01-01 | Danish | Testing of concrete - Hardened concrete - Core bending test |
121 | DS DS 423.26-1984 | 1984-01-01 | Danish | Testing of concrete - Hardened concrete - Compressive strength - Accelerated curing for 24 hours |
122 | DS DS 423.25-1984 | 1984-01-01 | Danish | Testing of concrete - Hardened concrete - Modulus of elasticity |
123 | DS DS 423.19-1984 | 1984-01-01 | Danish | Testing of concrete - Content of soluble chlorides in fresh concrete |
124 | DS DS 423.18-1984 | 1984-01-01 | Danish | Testing of concrete - Fresh concrete - Bleeding |
125 | DS DS 423.17-1984 | 1984-01-01 | Danish | Testing of concrete - Fresh concrete - Hardening |
126 | DS DS 1070-1984 | 1984-01-01 | Danish | Fire protecting doors BS-, BD- and F-Doors |
127 | DS DS 2191.0-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 0: Guidelines |
128 | DS DS 2191.1-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 1: Determination of sound pressure level at the operators and other specified positions around the machine |
129 | DS DS 2191.2-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 2: Operating conditions for single blade circular saw benches |
130 | DS DS 2191.3-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 3: Operating conditions for planing machines |
131 | DS DS 2191.4-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 4: Operating conditions for thickness planing machines |
132 | DS DS 2191.5-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 5: Operating conditions for single spindle moulding machines |
133 | DS DS 2191.6-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 6: Operating conditions for double-end profiling machines |
134 | DS DS 2191.7-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 7: Operating conditions for edge banding machines |
135 | DS DS 2191.8-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 8: Operating conditions for double-end sizing and edge banding machines |
136 | DS DS 2191.9-1984 | 1984-01-01 | Danish | Measurement of noise from woodworking machines - Part 9: Operating conditions for two-side and multi-side planing and moulding machines |
137 | DS DS/ISO 7023-1984 | 1984-01-01 | English | Packaging - Sacks - Method of sampling empty sacks for testing |
138 | DS DS/ISO 5715-1984 | 1984-01-01 | English | Equipment for harvesting - Dimensional compatibility of forage harvesting machinery |
139 | DS DS/ISO 5702-1984 | 1984-01-01 | English | Equipment for harvesting - Combine harvester component parts - Equivalent terms |
140 | DS DS 239-1984 | 1984-01-01 | Danish | Chloride - Potentiometric method |
141 | DS DS/ISO 6599/1-1984 | 1984-01-01 | English | Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks |
142 | DS DS/ISO 7378-1984 | 1984-01-01 | Danish | Fasteners - Bolts, screws and studs - Split pin holes and wire holes |
143 | DS DS/ISO 7256/2-1984 | 1984-01-01 | English | Sowing equipment - Test methods - Part 2: Seed drills for sowing in lines |
144 | DS DS/ISO 7256/1-1984 | 1984-01-01 | English | Sowing equipment - Test methods - Part 1: Single seed drills (precision drills) |
145 | DS DS/ISO 6880-1984 | 1984-01-01 | Danish | Machinery for agriculture - Trailed units of shallow tillage equipment - Main dimensions and attachment points |
146 | DS DS/ISO 6590/1-1984 | 1984-01-01 | Danish, English, French | Packaging - Sacks - Vocabulary and types - Part 1: Paper sacks |
147 | DS DS 297-1984 | 1984-01-01 | Danish | Water quality - Inhibition of heterotrophic microorganisms by determination of oxygen consumption rate |
148 | DS DS 296-1984 | 1984-01-01 | Danish | Water quality - Inhibition of the TTC-dehydrogenase activity of activated sludge |
149 | DS DS/ISO 3676-1984 | 1984-01-01 | Danish | Packaging - Unit load sizes - Dimensions |
150 | DS DS/ISO 693-1984 | 1984-01-01 | English | Dimensions of seam welding wheel blanks |
151 | DS DS 1126.5-1983 | 1983-01-01 | Danish | Joints in building - General check-list of joint functions |
152 | DS DS 293-1983 | 1983-01-01 | Danish | Water quality - Incubator method for determining the carbon assimilation by plankton algae using 14C-technique |
153 | DS DS 364.1-1983 | 1983-01-01 | Danish | Pallets - 800 mm x 600 mm - Requirements and testing. |
154 | DS DS 1122.2-1983 | 1983-01-01 | Danish | Ventilating sheet ducts - Strength and air tightness - Requirements |
155 | DS DS 1126.3-1983 | 1983-01-01 | Danish | Joints in building - Accommodation of dimensional deviations - Classification |
156 | DS DS 1126.2-1983 | 1983-01-01 | Danish | Joints in building - Rules for classification based on geometrical performance |
157 | DS DS/ISO 1996/1-1983 | 1983-01-01 | English | Acoustics - Description and measurement of environmental noise - Part 1: Basic quantities and procedures |
158 | DS DS 1126.0-1983 | 1983-01-01 | Danish | Joints in building - Survey |
159 | DS DS 1126.1-1983 | 1983-01-01 | Danish | Joints in building - Terminology |
160 | DS DS/IEC 244-7A-1983 | 1983-01-01 | English, French | Methods of measurement for radio transmitters - Part 7: Cabinet radiation at frequencies above 1 GHz - Section Four - Medium-sized transmitters - Section Five - Large transmitters |
161 | DS DS/ISO 622-1983 | 1983-01-01 | English | Solid mineral fuels - Determination of phosphorus content - Reduced molybdophosphate photometric method |
162 | DS DS/ISO 5669-1983 | 1983-01-01 | English | Agricultural trailers and trailed equipment - Braking cylinders - Specifications |
163 | DS DS 294-1983 | 1983-01-01 | Danish | Determination of photosynthetically active irradiance in water |
164 | DS DS 1122.1-1983 | 1983-01-01 | Danish | Ventilating sheet ducts - Strength and air tightness - Testing |
165 | DS DS 1126.4-1983 | 1983-01-01 | Danish | Joints in building - Positioning of fixing points |
166 | DS DS 1124-1983 | 1983-01-01 | Danish | Tolerances in building - Terminology |
167 | DS DS 766-1983 | 1983-01-01 | Danish | Data sheet - Counter balanced truck |
168 | DS DS/ISO 6123/1-1983 | 1983-01-01 | English | Rubber or plastic covered rollers - Specifications - Part 1: Requirements for hardness |
169 | DS DS 1075-1983 | 1983-01-01 | Danish | Preferred horizontal dimensions for building |
170 | DS DS 1076-1983 | 1983-01-01 | Danish | Preferred vertical dimensions for building |
171 | DS DS 703-1983 | 1983-01-01 | Danish | Directions for lighting in hospitals |
172 | DS DS 1028.3-1983 | 1983-01-01 | Danish | Interior doors - Door leaves |
173 | DS DS/INF 20.1-1983 | 1983-01-01 | Danish, English | Danish-English electrotechnical vocabulary |
174 | DS DS/INF 20.2-1983 | 1983-01-01 | Danish, English | English-Danish electrotechnical vocabulary |
175 | DS DS 2077.2-1983 | 1983-01-01 | Danish | Plastics pipes - Drain pipes and fittings - Testing and inspections |
176 | DS DS 2077.1-1983 | 1983-01-01 | Danish | Plastics pipes - Drain pipes and fittings - Requirements |
177 | DS DS/ISO 14-1983 | 1983-01-01 | English | Straight-sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification |
178 | DS DS 104-1983 | 1983-01-01 | Danish | Technical drawing - Special rules for terrain plans |
179 | DS DS 105-1983 | 1983-01-01 | Danish | Technical drawing - Special rules for dimensioning on terrain profiles |
180 | DS DS 2251-1983 | 1983-01-01 | Danish | Water quality - Determination of aerobic total viable count at 21 Centigrades |
181 | DS DS 440-1983 | 1983-01-01 | Danish | Dansk Ingeniørforenings Code of Practice for smaller drainage disposal systems for percolations into the ground |
182 | DS DS 1094.3-1983 | 1983-01-01 | Danish | Determination of air tightness for sealed glazing units |
183 | DS DS/ISO 5690/1-1983 | 1983-01-01 | English | Equipment for distributing fertilizers - Test methods - Part 1: Full width fertilizer distributors |
184 | DS DS 1094.5-1983 | 1983-01-01 | Danish | Sealed glazing units - Identification tests and requirements |
185 | DS DS 1094.0-1983 | 1983-01-01 | Danish | Sealed glazing units - Quality requirements |
186 | DS DS 1077-1983 | 1983-01-01 | Danish | Industrial buildings - Preferred horizontal dimensions |
187 | DS DS 1100-1983 | 1983-01-01 | Danish | Tolerances in building - Preferred sizes |
188 | DS DS/ISO 5697-1983 | 1983-01-01 | English | Agricultural and forestry vehicles - Determination of braking performance |
189 | DS DS 2189-1983 | 1983-01-01 | Danish | Cooking pans and vessels for electric cookers - Bottom diameter and surface planeness |
190 | DS DS 1094.4-1983 | 1983-01-01 | Danish | Determination of the ability of sealed glazing units to resist accelerated climatic strains |
191 | DS DS 1094.2-1983 | 1983-01-01 | Danish | Determination of dew point for sealed glazing units |
192 | DS DS 1094.1-1983 | 1983-01-01 | Danish | Determination of cleanliness for sealed glazing units |
193 | DS DS/ISO 5837/2-1983 | 1983-01-01 | English | Implants for surgery - Intramedullary nailing systems - Part 2: Medullary pins |
194 | DS DS 2256-1983 | 1983-01-01 | Danish | Water quality - Determination of Clostridium perfringens |
195 | DS DS 1103.11-1982 | 1982-01-01 | Norwegian | Test methods for rigid flat sheets - Surface finish (roughness) and surface stability |
196 | DS DS/ISO 811-1982 | 1982-01-01 | English | Textile fabrics - Determination of resistance to water penetration - Hydrostatic pressure test |
197 | DS DS 1103.9-1982 | 1982-01-01 | Norwegian | Test methods for rigid flat sheets - Paintability |
198 | DS DS/ISO 6948-1982 | 1982-01-01 | English | Automatic steam traps - Production and performance characteristic tests |
199 | DS DS 1103.8-1982 | 1982-01-01 | Norwegian | Test methods for rigid flat sheets - Dimensional changes associated with changes in relative humidity |
200 | DS DS 2188-1982 | 1982-01-01 | Danish, English | Acoustics - Vocabulary |
201 | DS DS 2187-1982 | 1982-01-01 | Danish | Oil burning, fan-assisted air heaters |
202 | DS DS/ISO 5691-1982 | 1982-01-01 | English | Equipment for planting - Potato planters - Method of testing |
203 | DS DS 1097.9-1982 | 1982-01-01 | Norwegian | Floorings - Tensile strength and elongation at rupture |
204 | DS DS/ISO 5710-1982 | 1982-01-01 | English | Equipment for internal farm work and husbandry - Continuous manure scraper conveyors for stalls |
205 | DS DS 1082-1982 | 1982-01-01 | Danish | Sound insulating doors - Classification |
206 | DS DS 1103.10-1982 | 1982-01-01 | Norwegian | Test methods for rigid flat sheets - Determination of air permeability |
207 | DS DS 1103.12-1982 | 1982-01-01 | Norwegian | Test methods for rigid flat sheets - Determination of sand quantity |
208 | DS DS 1103.13-1982 | 1982-01-01 | Norwegian | Test methods for rigid flat sheets - Accelerated test for the evaluation of the durability of boards exposed to water, frost and heat |
209 | DS DS 2131.3-1982 | 1982-01-01 | Danish | Fittings of PEM and PEH for buried gas pipe lines - Inspection of small batches of fittings not inspected by internal regular inspection of production |
210 | DS DS 2131.2-1982 | 1982-01-01 | Danish | Pipes, fittings and joints of polyethylene type PEM and PEH for buried gas pipe lines |
211 | DS DS 264-1982 | 1982-01-01 | Danish | Water quality - Determination of manganese in water, sludge and sediment by atomic absorption spectrophotometry in flame |
212 | DS DS 262-1982 | 1982-01-01 | Danish | Determination of aluminium in water, sludge and sediment by atomic absorption spectrophotometry in flame |
213 | DS DS 1000-1982 | 1982-01-01 | Danish | Multi-storey housing - Vertical dimensions |
214 | DS DS 2111.7-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Projection methods - Orthographic projection |
215 | DS DS 2111.9-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Representation of areas on views and sections |
216 | DS DS 5004.691-1982 | 1982-01-01 | Danish, English | International Electrotechnical Vocabulary - Chapter 691 - Tariffs for electricity |
217 | DS DS/ISO 2951-1982 | 1982-01-01 | English | Vulcanized rubber - Determination of insulation resistance |
218 | DS DS 2111.1-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Survey |
219 | DS DS/R 261-1982 | 1982-01-01 | Danish | Extraction - General guidelines |
220 | DS DS 2111.4-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Lettering |
221 | DS DS 735-1982 | 1982-01-01 | Danish | Colours for identification purposes |
222 | DS DS 2111.5-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Dimensioning - General rules |
223 | DS DS/INF 16-1982 | 1982-01-01 | Danish, English | Glossary of terms commonly used in ergonomics |
224 | DS DS 6037-1982 | 1982-01-01 | Danish | Agriculture - Windows for stalls - Main dimensions |
225 | DS DS 2111.6-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Dimensioning - Methods |
226 | DS DS 2095.1-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Drawings for construction of reinforced concrete |
227 | DS DS 2111.8-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Representation of views and sections |
228 | DS DS 2111.12-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Guidelines for representation |
229 | DS DS 2111.13-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Revision |
230 | DS DS 2111.14-1982 | 1982-01-01 | Danish | Building and civil engineering drawings - Drawing schedule |
231 | DS DS/ISO 4920-1982 | 1982-01-01 | English | Textile fabrics - Determination of resistance to surface wetting (spray test) |
232 | DS DS 1050-1982 | 1982-01-01 | Danish, English | Application of dimensional tolerances in building |
233 | DS DS 1046-1982 | 1982-01-01 | Danish | Level of floors |
234 | DS DS 1028-1982 | 1982-01-01 | Danish | Single-leafed interior doors - Modular sizes |
235 | DS DS 1011.2-1982 | 1982-01-01 | Danish | Modular co-ordination in building - Planning modules |
236 | DS DS 1003-1982 | 1982-01-01 | Danish | Windows - Modular sizes |
237 | DS DS/ISO 3511-1-1982 | 1982-01-01 | Danish | Process measurement control functions and instrumentation - Symbolic representation - Part 1: Basic requirements |
238 | DS DS/ISO 6704-1982 | 1982-01-01 | English | Automatic steam traps - Classification |
239 | DS DS/ISO 6314-1981 | 1981-01-01 | English | Road vehicles - Brake linings - Resistance to water, saline solution, oil and brake fluid - Test procedure |
240 | DS DS/ISO 6311-1981 | 1981-01-01 | English | Road vehicles - Brake linings - Internal shear strength of lining material - Test procedure |
241 | DS DS/ISO 6240-1981 | 1981-01-01 | Danish | Performance standards in building - Contents and presentation |
242 | DS DS/ISO 17-1981 | 1981-01-01 | Danish | Guide for the use of preferred numbers and of series of preferred numbers |
243 | DS DS/ISO 3-1981 | 1981-01-01 | Danish | Preferred numbers - Series of preferred numbers |
244 | DS DS 146-1981 | 1981-01-01 | Danish | Coniferous sawn timber - Cross section sizes and lengths |
245 | DS DS/ISO 6315-1981 | 1981-01-01 | English | Road vehicles - Brake linings - Seizure to ferrous mating surface due to corrosion - Test procedure |
246 | DS DS/ISO 6313-1981 | 1981-01-01 | English | Road vehicles - Brake linings - Effects of heat on dimensions and form of disc brake pads - Test procedure |
247 | DS DS/ISO 4341-1981 | 1981-01-01 | English | Information processing - Magnetic tape cassette and cartridge labelling and file structure for information interchange |
248 | DS DS/IEC 554-3-1-1981 | 1981-01-01 | English, French | Specification for cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: General purpose electrical paper |
249 | DS DS/IEC 667-1-1981 | 1981-01-01 | English, French | Specification for vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements |
250 | DS DS 2177-1981 | 1981-01-01 | Swedish | Furniture and fittings - Assessment of surfaces and edges resistance to mechanical impact |
251 | DS DS 2169-1981 | 1981-01-01 | Danish | Workplace atmosphere - Counting criteria for asbestos fibres |
252 | DS DS 2175-1981 | 1981-01-01 | Swedish | Furniture and fittings - Assessment of edges resistance to water |
253 | DS DS/IEC 554-3-4-1981 | 1981-01-01 | English, French | Specification for cellulosic papers for electrical purposes - Part 3: Specification for individual materials - Sheet 4: Electrolytic capacitor paper |
254 | DS DS/IEC 554-3-3-1981 | 1981-01-01 | English, French | Specification for cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Crepe paper |
255 | DS DS/ISO 6552-1981 | 1981-01-01 | English | Automatic steamtraps - Definitions of technical terms |
256 | DS DS/ISO 6553-1981 | 1981-01-01 | English | Automatic steam traps - Marking |
257 | DS DS/ISO 6554-1981 | 1981-01-01 | English | Flanged automatic steam traps - Face-to-face dimensions |
258 | DS DS/ISO 2602-1981 | 1981-01-01 | English | Statistical interpretation of test results - Estimation of the mean - Confidence interval |
259 | DS DS/ISO 2590-1981 | 1981-01-01 | English | General method for the determination of arsenic - Silver diethyldithiocarbamate photometric method |
260 | DS DS/IEC 244-7-1981 | 1981-01-01 | English, French | Methods of measurement for radio transmitters - Part 7: Cabinet radiation at frequencies above 1 GHz |
261 | DS DS/ISO 2384-1981 | 1981-01-01 | English | Documentation - Presentation of translations |
262 | DS DS/ISO 5128-1980 | 1980-01-01 | English | Acoustics - Measurement of noise inside motor vehicles |
263 | DS DS/ISO 272-1980 | 1980-01-01 | Danish | Fasteners - Hexagon products - Width across flats |
264 | DS DS 1117-1980 | 1980-01-01 | Danish | Timber structures - Testing of mechanical timber fasteners - Requirements to the wood and calculations of characteristic values |
265 | DS DS 204-1980 | 1980-01-01 | Danish | Determination of total residue and total fixed residue in water, sludge and sediment |
266 | DS DS 1051.2-1980 | 1980-01-01 | Danish | Fire-resistance tests - Door and shutter assemblies |
267 | DS DS 1116-1980 | 1980-01-01 | Danish | Timber structures - Mechanical timber joints - Short-term testing |
268 | DS DS 364-1980 | 1980-01-01 | Danish | Pallets - Basic dimensions |
269 | DS DS/ISO 5184-1980 | 1980-01-01 | Danish | Straight resistance spot welding electrodes |
270 | DS DS/ISO 370-1980 | 1980-01-01 | Danish | Toleranced dimensions - Conversion from inches into millimeters and vice versa |
271 | DS DS/ISO 5680-1980 | 1980-01-01 | Danish | Equipment for working the soil - Tines and shovels for cultivators - Main fixing dimensions |
272 | DS DS 377-1980 | 1980-01-01 | Danish | Alphabetical arrangements |
273 | DS DS 1118-1980 | 1980-01-01 | Danish | Glued timber structures - Glued laminated timber - Production and control |
274 | DS DS/EN 76-1980 | 1980-01-01 | English | Packages for certain prepacked foodstuffs - Capacities of glass and metal containers |
275 | DS DS/INF 10-1980 | 1980-01-01 | Danish | Guidelines for sensory evaluations |
276 | DS DS/R 208-1980 | 1980-01-01 | Danish | Determination of oil and grease in water - Gravimetric method |
277 | DS DS 6036-1980 | 1980-01-01 | Danish | Equipment for sowing and planting - Discs - Dimensions |
278 | DS DS/ISO 3494-1980 | 1980-01-01 | English | Statistical interpretation of data - Power of test relating to means and variances |
279 | DS DS 1049-1980 | 1980-01-01 | Danish, English | Positioning of structural building components in modular grids |
280 | DS DS/ISO 2902-1980 | 1980-01-01 | Danish | ISO metric trapezoidal screw threads - General plan |
281 | DS DS/ISO 2854-1980 | 1980-01-01 | English | Statistical interpretation of data - Techniques of estimation and tests relating to means and variances |
282 | DS DS 2166-1980 | 1980-01-01 | Danish | Micrographics - Computer output microfiche (COM) - A6 size |
283 | DS DS/ISO 5699-1980 | 1980-01-01 | Danish | Agricultural machines, implements and equipment - Dimensions for mechanical loading with bulk goods |
284 | DS DS 2160-1980 | 1980-01-01 | Danish | Modular coordination in the transport chain |
285 | DS DS 1-1980 | 1980-01-01 | Danish | Metric linear basic sizes for engineering |
286 | DS DS/ISO 4178-1980 | 1980-01-01 | English | Complete filled transport packages - Distribution trials - Information to be recorded |
287 | DS DS/ISO/R 1938-1980 | 1980-01-01 | Danish | ISO-system of limits and fits - Inspection of plain work pieces |
288 | DS DS/ISO 2904-1980 | 1980-01-01 | Danish | ISO metric trapezoidal screw threads - Basic dimensions |
289 | DS DS 1084(1982)-1979 | 1979-01-01 | Danish | Sound insulating windows - Classification |
290 | DS DS 2157-1979 | 1979-01-01 | Danish | Pallets - Repair of EUR-pallets |
291 | DS DS 2145-1979 | 1979-01-01 | Danish | PVC-pipes - Testing and determination of the resistance to stress-cracking |
292 | DS DS 2130.3-1979 | 1979-01-01 | Danish | Plastics pipes - Test C for leakproofness of joints under external water pressure |
293 | DS DS 2130.2-1979 | 1979-01-01 | Danish | Plastics pipes - Test B for leakproofness of joints under internal air pressure |
294 | DS DS/ISO 937-1979 | 1979-01-01 | English | Meat and meat products - Determination of nitrogen content (Reference method) |
295 | DS DS 1110-1979 | 1979-01-01 | Danish | Glued timber structures - Determination of block shear strength |
296 | DS DS/ISO 4995-1979 | 1979-01-01 | English | Hot-rolled steel sheet of structural quality |
297 | DS DS/ISO 2451-1979 | 1979-01-01 | English | Cocoa beans - Specifications |
298 | DS DS/ISO 2294-1979 | 1979-01-01 | English | Meat and meat products - Determination of total phosphorus content (Reference method) |
299 | DS DS 1108-1979 | 1979-01-01 | Danish | Timber structures - Testing |
300 | DS DS 1109-1979 | 1979-01-01 | Danish | Glued timber structures - Production and control |
301 | DS DS 1111-1979 | 1979-01-01 | Danish | Glued timber structures - Delamination test |
302 | DS DS 6032-1979 | 1979-01-01 | Danish | Agricultural tractors - Mounting profile for front ballast weights |
303 | DS DS 709-1979 | 1979-01-01 | Danish | Originals for transparencies |
304 | DS DS/ISO 4965-1979 | 1979-01-01 | English | Axial load fatigue testing machines - Dynamic force calibration - Strain gauge technique |
305 | DS DS 5004.446-1979 | 1979-01-01 | Danish, English | International Electrotechnical Vocabulary - Group 446 - Electrical relays |
306 | DS DS/EN 23-1-1979 | 1979-01-01 | Danish | Packages for washing and cleaning powder - Dimensions and volumes of cartons and drums from fibre board |
307 | DS DS 1051.1-1979 | 1979-01-01 | Danish | Fire-resistance tests - Elements of building construction |
308 | DS DS/INF 8-1979 | 1979-01-01 | Danish, English | Continuous mechanical handling equipment - Safety code for conveyors and elevators with chain elements - Examples for guarding of nip points |
309 | DS DS/R 2152-1979 | 1979-01-01 | Danish | Truck - Terminology |
310 | DS DS/ISO 1113-1979 | 1979-01-01 | English | Information processing. Representation of the 7-bit coded character set on punched tape |
311 | DS DS 113.2-1978 | 1978-10-01 | Danish | Lifting eye bolts |
312 | DS DS/EN 59-1978 | 1978-01-01 | English | Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor |
313 | DS DS 992-1978 | 1978-01-01 | Danish | Packaging - Ribbed glass bottles for dangerous goods |
314 | DS DS/IEC 589-1978 | 1978-01-01 | English, French | Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids |
315 | DS DS/ISO 888-1978 | 1978-01-01 | English | Bolts, screws and studs - Nominal lengths, and thread lengths for general purpose bolts |
316 | DS DS/IEC 554-1-1978 | 1978-01-01 | English, French | Specification for cellulosic papers for electrical purposes - Part 1: Definitions and general requirements |
317 | DS DS 1107-1978 | 1978-01-01 | Danish | Stairs - Vocabulary |
318 | DS DS/IEC 581-1-1978 | 1978-01-01 | English, French | High fidelity audio equipment and systems; minimum performance requirements - Part 1: General |
319 | DS DS 2151-1978 | 1978-01-01 | Danish | Shoe sizes - Mondopoint system |
320 | DS DS/IEC 244-3-1978 | 1978-01-01 | English, French | Methods of measurement for radio transmitters - Part 3: Wanted and unwanted modulation |
321 | DS DS 235-1978 | 1978-01-01 | Danish | Water analysis - Determination of acidity and carbon dioxide |
322 | DS DS/IEC 244-3B-1978 | 1978-01-01 | English, French | Second supplement to Publication 244-3 (1972) - Methods of measurement for radio transmitters - Part 3: Wanted and unwanted modulation - Unwanted modulation, including hum and noise modulation |
323 | DS DS 260-1978 | 1978-01-01 | Danish | Water analysis - Aluminium in water - Photometric method |
324 | DS DS/IEC 244-6-1978 | 1978-01-01 | English, French | Methods of measurement for radio transmitters - Part 6: Cabinet radiation at frequencies between 130 kHz and 1 GHz |
325 | DS DS/IEC 244-3A-1978 | 1978-01-01 | English, French | First supplement to Publication 244-3 (1972) - Methods of measurement for radio transmitters - Part 3: Wanted and unwanted modulation - Appendices |
326 | DS DS/IEC 244-2-1978 | 1978-01-01 | English, French | Methods of measurement for radio transmitters - Part 2: Bandwidth, out-of-band power and power of non-essential oscillations with Amendment No. 1 (1974) |
327 | DS DS/IEC 244-4-1978 | 1978-01-01 | English, French | Methods of measurement for radio transmitters - Part 4: Amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting |
328 | DS DS/IEC 244-2A-1978 | 1978-01-01 | English, French | First supplement to Publication 244-2 (1969) - Methods of measurement for radio transmitters - Part 2: Bandwidth, out-of-band power and power of non-essential oscillations - Appendices with Amendment No. 1 (1973) |
329 | DS DS/IEC 244-2B-1978 | 1978-01-01 | English, French | Methods of measurement for radio transmitters - Part 2: Bandwidth, out-of-band power and power of non-essential oscillations - Modulating signals for the measurement of bandwidth and out-of-band power of transmitters for telephony and sound broadcasting |
330 | DS DS/IEC 244-4A-1978 | 1978-01-01 | English, French | First supplement to Publication 244-4 (1973) - Methods of measurement for radio transmitters - Part 4: Amplitude/frequency characteristics and non-linearity distortion in transmitters for radiotelephony and sound broadcasting - Section three |
331 | DS DS 236-1977 | 1977-01-01 | Danish | Water analysis - Stability with respect to calcium carbonate |
332 | DS DS 256-1977 | 1977-01-01 | Danish | Water analysis - Components of the carbonate system - (Calculation method) |
333 | DS DS/ISO 3763-1977 | 1977-01-01 | English | Wrought steels - Macroscopic methods for assessing the content of non-metallic inclusions |
334 | DS DS/ISO 3754-1977 | 1977-01-01 | English | Steel - Determination of effective depth of hardening after flame or induction hardening |
335 | DS DS/ISO 2308-1977 | 1977-01-01 | English | Hooks for lifting freight containers of up to 30 tonnes capacity - Basic requirements |
336 | DS DS 1039-1977 | 1977-01-01 | Danish | Concrete components for interior load bearing walls - Coordinating and basic sizes |
337 | DS DS/ISO 3508-1977 | 1977-01-01 | Danish | Thread run-outs - Metric screw threads |
338 | DS DS 1038-1977 | 1977-01-01 | Danish | Concrete components for floor slab - Coordinating and basic sizes |
339 | DS DS 1097.7-1977 | 1977-01-01 | Swedish | Floorings - Determination of abrasion resistance |
340 | DS DS/IEC 549-1977 | 1977-01-01 | English, French | High-voltage fuses for the external protection of shunt power capacitors |
341 | DS DS 1101-1977 | 1977-01-01 | Danish | Large panels for floors and for load bearing and non-bearing interior walls - Preferred sizes |
342 | DS DS 1058.3-1977 | 1977-01-01 | Danish | Materials - Coverings and linings - Ignition temperature and surface spread of flame |
343 | DS DS 1104.1-1976 | 1976-01-01 | Norwegian | Measurement of surface smoothness of door leaves |
344 | DS DS 280-1976 | 1976-01-01 | Danish | Water analysis - Determination of sulphide in waste water |
345 | DS DS 278-1976 | 1976-01-01 | Danish | Water analysis - Determination of sulphide in natural and pure water |
346 | DS DS/ISO 2331-1976 | 1976-01-01 | Danish, English, French | Fork lift trucks - Hook-on type fork arms - Vocabulary |
347 | DS DS 1104.5-1976 | 1976-01-01 | Norwegian | Determination of doorsets resistance to torsion |
348 | DS DS 6026-1976 | 1976-01-01 | Danish | Agricultural mounted implements - Centre of gravity indication |
349 | DS DS 2130-1976 | 1976-01-01 | Danish | Plastics pipes - Test A for leakproofness of elastic sealing joint |
350 | DS DS/ISO 3505-1976 | 1976-01-01 | Danish | Ropes and cordage - Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels |
351 | DS DS 15-1976 | 1976-01-01 | Danish | Radii and chamfers |
352 | DS DS 912.11-1975 | 1975-01-01 | Danish | Continuous forms for automatic processing |
353 | DS DS 96-1975 | 1975-01-01 | Danish | Parallel keys - Application and dimensions |
354 | DS DS 2124.2-1975 | 1975-01-01 | Danish | Protective helmets for road users - Test methods |
355 | DS DS 133-1975 | 1975-01-01 | Danish | Shaft heights - Driving and driven machines |
356 | DS DS 1010.2-1975 | 1975-01-01 | Danish | Modular co-ordination in building - Principles and rules |
357 | DS DS 1010.1-1975 | 1975-01-01 | Danish | Modular co-ordination in building - Vocabulary |
358 | DS DS 2124.1-1975 | 1975-01-01 | Danish | Protective helmets for road users - Requirements |
359 | DS DS 761.6-1975 | 1975-01-01 | Danish | Fire hydrant, size A, details |
360 | DS DS 6031-1975 | 1975-01-01 | Danish | Agricultural lead-acid batteries |
361 | DS DS 6030-1975 | 1975-01-01 | Danish | Agricultural charging rectifiers |
362 | DS DS/ISO 16-1975 | 1975-01-01 | English | Acoustics - Standard tuning frequency (Standard musical pitch) |
363 | DS DS 763.6-1975 | 1975-01-01 | Danish | Fire hydrant, size C, details |
364 | DS DS 1097.4-1975 | 1975-01-01 | Swedish | Floorings - Determination of dimensional changes and loss in weight on heating |
365 | DS DS/ISO 962-1975 | 1975-01-01 | English | Information processing - Implementation of the 7-bit coded character set and its 7-bit and 8-bit extensions on 9-track, 12,7 mm (0,5 in) magnetic tape |
366 | DS DS 1097.5-1975 | 1975-01-01 | Swedish | Floorings - Determination of indentation - Short-time test |
367 | DS DS 1081-1975 | 1975-01-01 | Danish | Roof slopes |
368 | DS DS/ISO 2937-1975 | 1975-01-01 | English | Plain and seamless steel tubes for mechanical application |
369 | DS DS 1097.3-1975 | 1975-01-01 | Swedish | Floorings - Determination of dimensional changes at immersion in water |
370 | DS DS 1097.2-1975 | 1975-01-01 | Swedish | Floorings - Determination of dimensional changes caused by changes in relative humidity |
371 | DS DS/ISO 532-1975 | 1975-01-01 | English | Acoustics - Method for calculating loudness level |
372 | DS DS 762.6-1975 | 1975-01-01 | Danish | Fire hydrant, size B, details |
373 | DS DS 224-1975 | 1975-01-01 | Danish | Water analysis - Determination of ammonia-nitrogen |
374 | DS DS 218-1975 | 1975-01-01 | Danish | Water analysis - Potentiometric determination of fluoride |
375 | DS DS 281-1975 | 1975-01-01 | Danish | Water analysis - Determination of phenol in water |
376 | DS DS 219-1975 | 1975-01-01 | Danish | Water analysis - Determination of iron |
377 | DS DS 6025-1974 | 1974-01-01 | Danish | Agricultural tractors - Power lift rating |
378 | DS DS/R 1083-1974 | 1974-01-01 | Danish | Roofs - Loadbearing units - Preferred sizes, bearing, marking |
379 | DS DS 13-1973 | 1973-01-01 | Danish | Right and left designation of windows and doors |
380 | DS DS 6020-1973 | 1973-01-01 | Danish | Agriculture - Beet-seeds - Size and methods of grading processed seed |
381 | DS DS 250-1973 | 1973-01-01 | Danish | Water analysis - Determination of the sum of calcium and magnesium |
382 | DS DS/IEC 212-1973 | 1973-01-01 | English, French | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
383 | DS DS 248-1973 | 1973-01-01 | Danish | Water analysis - Determination of calcium |
384 | DS DS 249-1973 | 1973-01-01 | Danish | Water analysis - Determination of chloride |
385 | DS DS/IEC 369-1973 | 1973-01-01 | English, French | Methods for measuring performance of floor polishers for household and similar purposes |
386 | DS DS 431-1973 | 1973-01-01 | Danish | Dansk Ingeniørforenings Code of Practice for automatic sprinkler systems in buildings |
387 | DS DS 2060.8-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing - Cheese resistance |
388 | DS DS 2060.10-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Wax resistance |
389 | DS DS 1036-1970 | 1970-01-01 | Danish | Pipework in building - Dimensioning |
390 | DS DS 2060.11-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Spice resistance |
391 | DS DS 2060.7-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Detergent resistance |
392 | DS DS 2060.9-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Edible oil and fat resistance |
393 | DS DS 2060.6-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Soap resistance |
394 | DS DS 2060.5-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Alkali resistance |
395 | DS DS 2060.4-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Solvent resistance |
396 | DS DS 2060.13-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - European colour-scale for offset |
397 | DS DS 6014-1970 | 1970-01-01 | Danish | Agriculture - Hitch pins for three-points linkage |
398 | DS DS 2060.3-1970 | 1970-01-01 | Danish | Testing of prints and inks for printing trade - Water resistance |
399 | DS DS 1037-1970 | 1970-01-01 | Danish | Pipework in building - Equalizing of deviations |
400 | DS DS 2056-1969 | 1969-01-01 | Danish | Fastness to light of writing materials - Requirements and rules for testing |
401 | DS DS 2018.2-1969 | 1969-01-01 | Danish | Stainless steel sink |
402 | DS DS 2018.1-1969 | 1969-01-01 | Danish | Stainless steel sink with rinse basin |
403 | DS DS 2058-1969 | 1969-01-01 | Danish | Inks for permanent black writings |
404 | DS DS 2057-1969 | 1969-01-01 | Danish | Fastness to light of writing materials - Preparation of test samples |
405 | DS DS 2060.1-1969 | 1969-01-01 | Danish | Testing of prints and inks for printing trade - Preparation of standard printing proofs |
406 | DS DS 2060.2-1969 | 1969-01-01 | Danish | Testing of prints and inks for printing trade - Determination of light fastness |
407 | DS DS 912.1-C-1969 | 1969-01-01 | Danish | Appendix C to DS 912.1 |
408 | DS DS 912.1-A-1969 | 1969-01-01 | Danish | Appendix A to DS 912.1 |
409 | DS DS 2060.12A-1969 | 1969-01-01 | Danish | Appendix to DS 2060.12 |
410 | DS DS 912.2-1969 | 1969-01-01 | Danish | Paper forms - Basic details |
411 | DS DS 912.1-B-1969 | 1969-01-01 | Danish | Appendix B to DS 912.1 |
412 | DS DS 2060.12-1969 | 1969-01-01 | Danish | Testing of prints and inks for printing trade - European colour-scale for letterpress |
413 | DS DS 912.1-D-1969 | 1969-01-01 | Danish | Appendix D to 912.1 |
414 | DS DS 912.1-1969 | 1969-01-01 | Danish | Paper forms - Basic spacings and network. |
415 | DS DS/R 1040-1968 | 1968-01-01 | Danish | Staircase for double-flight stairs |
416 | DS DS 98-1968 | 1968-01-01 | Danish | Parallel keys - Holes for hold down and lifting screws |
417 | DS DS 2068-1968 | 1968-01-01 | Danish | Glass bottles for mineral water - 25 cl |
418 | DS DS 1041-1968 | 1968-01-01 | Danish | Modular dimensions of block-components |
419 | DS DS 2074.6-1968 | 1968-01-01 | Danish | Hexagon head screws - Whitworth thread - Black |
420 | DS DS 2085-1968 | 1968-01-01 | Danish | Fittings for piping - Wrench grip |
421 | DS DS 2087-1968 | 1968-01-01 | Danish | Female ended valves - End-to-end dimensions |
422 | DS DS 2074.5-1968 | 1968-01-01 | Danish | Hexagon bolts - Whitworth thread - Black |
423 | DS DS 2079.2-1967 | 1967-01-01 | Danish | Fittings for piping - Pipe threaded connections |
424 | DS DS 44-1967 | 1967-01-01 | Danish | Internal thread runout and undercut - ISO metric thread |
425 | DS DS 2080-1967 | 1967-01-01 | Danish | Fittings of copper alloys for piping - Pressure and temperature ratings |
426 | DS DS 53-1967 | 1967-01-01 | Danish | Glass bottles for beer |
427 | DS DS/IEC 135-1967 | 1967-01-01 | English, French | Numbering of electrodes and designation of units in electronic tubes and valves |
428 | DS DS 2078-1967 | 1967-01-01 | Danish | Fittings for piping - Pipe threaded connections (ISO) |
429 | DS DS 389-1967 | 1967-01-01 | Danish | Screw threads for bottles and glass jars |
430 | DS DS 2079.1-1967 | 1967-01-01 | Danish | Fittings for piping - Pipe threaded connections (short) |
431 | DS DS 1072-1967 | 1967-01-01 | Danish | Floor depressions and frames for door mats and scrapers |
432 | DS DS 2071.0-1966 | 1966-01-01 | Danish | Valves for batteries of gas cylinders - Outlet connections |
433 | DS DS 2071.1-1966 | 1966-01-01 | Danish | Valves for batteries of gas cylinders - Outlet connections for ammonia and oxygen |
434 | DS DS 2071.3-1966 | 1966-01-01 | Danish | Valves for batteries of gas cylinders - Outlet connection for nitrogen |
435 | DS DS 2071.2-1966 | 1966-01-01 | Danish | Valves for batteries of gas cylinders - Outlet connection for nitrous oxide |
436 | DS DS 2071.4-1966 | 1966-01-01 | Danish | Valves for batteries of gas cylinders - Outlet connection for acetylene |
437 | DS DS 2073-1966 | 1966-01-01 | Danish | Size-system for mens ready-made clothing. Suits |
438 | DS DS 1045-1965 | 1965-01-01 | Danish | Double pane sealed units |
439 | DS DS 2017.4-1965 | 1965-01-01 | Danish | Castle nuts - ISO inch screw thread - Finished |
440 | DS DS 378.1A-1965 | 1965-01-01 | Danish | Examples of transliteration of Russian names |
441 | DS DS 2016.4-1965 | 1965-01-01 | Danish | Hexagon nuts - B.S.W. thread - Finished |
442 | DS DS 2017.5-1965 | 1965-01-01 | Danish | Slotted and castle nuts - B.S.W. thread - Finished |
443 | DS DS 2016.5-1965 | 1965-01-01 | Danish | Hexagon nuts - B.S.W. thread - Black |
444 | DS DS 2017.3-1965 | 1965-01-01 | Danish | Slotted nuts - ISO inch screw thread - Finished |
445 | DS DS 2017.6-1965 | 1965-01-01 | Danish | Slotted nuts - B.S.W. thread - Black |
446 | DS DS 378.1-1964 | 1964-01-01 | Danish | Transliteration of the modern Russian alphabet |
447 | DS DS 42-1964 | 1964-01-01 | Danish | Whitworth fine screw threads, 7/32...3 inches |
448 | DS DS 4-1964 | 1964-01-01 | Danish | Whitworth screw threads, 1/4...6 inches |
449 | DS DS 761.2-1963 | 1963-01-01 | Danish | Fire hydrant, size A, details |
450 | DS DS 763.4-1963 | 1963-01-01 | Danish | Fire hydrant, size C, details |
451 | DS DS 761.1-1963 | 1963-01-01 | Danish | Fire hydrant, size A, details |
452 | DS DS 1033-1963 | 1963-01-01 | Danish | Explosion doors |
453 | DS DS 106.2-1963 | 1963-01-01 | Danish | Technical drawing - Graphical symbols for piping, etc. for power plants |
454 | DS DS 761.3-1963 | 1963-01-01 | Danish | Fire hydrant, size A, details |
455 | DS DS 761.0-1963 | 1963-01-01 | Danish | Fire hydrant, size A |
456 | DS DS 763.3-1963 | 1963-01-01 | Danish | Fire hydrant, size C, details |
457 | DS DS 763.1-1963 | 1963-01-01 | Danish | Fire hydrant, size C, details |
458 | DS DS 761.4-1963 | 1963-01-01 | Danish | Fire hydrant, size A, details |
459 | DS DS 349-1963 | 1963-01-01 | Danish | Door locks - Nomenclature |
460 | DS DS 763.2-1963 | 1963-01-01 | Danish | Fire hydrant, size C, details |
461 | DS DS 763.5-1963 | 1963-01-01 | Danish | Fire hydrant, size C, details |
462 | DS DS 763.0-1963 | 1963-01-01 | Danish | Fire hydrant, size C |
463 | DS DS 761.5-1963 | 1963-01-01 | Danish | Fire hydrant, size A, details |
464 | DS DS 762.2-1961 | 1961-01-01 | Danish | Fire hydrant, size B, details |
465 | DS DS 762.3-1961 | 1961-01-01 | Danish | Fire hydrant, size B, details |
466 | DS DS 762.4-1961 | 1961-01-01 | Danish | Fire hydrant, size B, details |
467 | DS DS 762.1-1961 | 1961-01-01 | Danish | Fire hydrant, size B, details |
468 | DS DS 762.5-1961 | 1961-01-01 | Danish | Fire hydrant, size B, details |
469 | DS DS 762.0-1961 | 1961-01-01 | Danish | Fire hydrant, size B |
470 | DS DS 134-1960 | 1960-01-01 | Danish | Identification colours and letter codes to be used for drawings and pipelines |
471 | DS DS 981-1960 | 1960-01-01 | Danish | Terminology on work-studies |
472 | DS DS 980-1960 | 1960-01-01 | Danish | Terminology on production planning and control |
473 | DS DS 924-1960 | 1960-01-01 | Danish | Textile testing - Methods of washing to be used for determining the designation of sizes of hosiery ware |
474 | DS DS 916-1959 | 1959-01-01 | Danish | Textile testing - Determination of yarn number of manufactured yarn |
475 | DS DS 918-1959 | 1959-01-01 | Danish | Girls hosiery ware - Size designation and body dimensions |
476 | DS DS 919-1959 | 1959-01-01 | Danish | Boys hosiery ware - Size designation and body dimensions |
477 | DS DS 157-1958 | 1958-01-01 | Danish | Straight gas cocks, 15, 20, 25, 32, 40, 50, 70 and 80 mm |
478 | DS DS 1005-1958 | 1958-01-01 | Danish | Wooden windows - Terminology and denominations of dimensions |
479 | DS DS 1004-1958 | 1958-01-01 | Danish | Windows - Type designations |
480 | DS DS 158-1958 | 1958-01-01 | Danish | L-shaped gas cocks - 20, 25, 32 and 40 mm |
481 | DS DS 24-1958 | 1958-01-01 | Danish | Cock for gas hoses for town gas and gas hose connectors for gas cookers |
482 | DS DS 760-1957 | 1957-01-01 | Danish | Fire protection - Materials for fire hose couplings, etc. |
483 | DS DS 729-1956 | 1956-01-01 | Danish | Gas cylinders - Tapered cylinder thread |
484 | DS DS 758-1955 | 1955-01-01 | Danish | Fire protection - A, B and C-hose caps with metallic bearing surface |
485 | DS DS 751-1955 | 1955-01-01 | Danish | Fire protection - D-couplings for hoses |
486 | DS DS 752-1955 | 1955-01-01 | Danish | Fire protection - A, B and C-fixed couplings with metallic bearing surface |
487 | DS DS 753-1955 | 1955-01-01 | Danish | Fire protection - A-fixed coupling with rubber packing |
488 | DS DS 754-1955 | 1955-01-01 | Danish | Fire protection - B-fixed coupling with rubber packing |
489 | DS DS 755-1955 | 1955-01-01 | Danish | Fire protection - C-fixed coupling with rubber packing |
490 | DS DS 756-1955 | 1955-01-01 | Danish | Fire protection - D-fixed coupling with rubber packing |
491 | DS DS 382-1955 | 1955-01-01 | Danish | Fire protection - C-couplings for hoses |
492 | DS DS 757-1955 | 1955-01-01 | Danish | Fire protection - A , B and C-hose caps with rubber packing |
493 | DS DS 759-1955 | 1955-01-01 | Danish | Fire protection - D-hose cap with metallic bearing surface |
494 | DS DS 750-1955 | 1955-01-01 | Danish | Fire protection - A-couplings for hoses |
495 | DS DS 722.3-1955 | 1955-01-01 | Danish | Pipelines for dairy plants etc. - Clamp liners for pipe couplings (DS 722.0) |
496 | DS DS 722.2-1955 | 1955-01-01 | Danish | Pipelines for dairy plants etc. - Unions for pipe couplings (DS 722.0) |
497 | DS DS 722.1-1955 | 1955-01-01 | Danish | Pipelines for dairy plants etc. - Nipples for pipe couplings (DS 722.0) |
498 | DS DS 722.0-1955 | 1955-01-01 | Danish | Pipelines for dairy plants etc. - Pipe couplings |
499 | DS DS 381-1955 | 1955-01-01 | Danish | Fire protection - B-couplings for hoses |
500 | DS DS 148-1954 | 1954-01-01 | Danish | Periodicals - Presentation of periodicals |
|