Pos | standard Number | publication date | Language | Description |
1 | DS DS/EN 12036-1996 | 1996-08-21 | English | Self-adhesive tapes - Solvent penetration into adhesive masking tapes |
2 | DS DS/EN 854-1996 | 1996-08-21 | English | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
3 | DS DS/EN 60870-6-501-1996 | 1996-08-21 | English | Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO and ITU-T recommendations - Section 501: TASE.1 service definitions |
4 | DS DS/ETS 300581-1-1996 | 1996-08-21 | English | European digital cellular telecommunications system - Half rate speech - Part 1: Half rate speech processing functions - (GSM 06.02) |
5 | DS DS/EN 50098-2-1996 | 1996-08-21 | English | Customer premises cabling for Information Technology - Part 2: 2048 kbit/s ISDN primary access and leased line network interface |
6 | DS DS/EN 1261-1996 | 1996-08-21 | English | Fibre ropes for general service - Hemp |
7 | DS DS/EN 60870-6-502-1996 | 1996-08-21 | English | Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO and ITU-T recommendations - Section 502: TASE.1 protocol definitions |
8 | DS DS/ETS 300194-1996 | 1996-08-21 | English | Satellite Earth Stations and Systems (SES) - The interconnection of Very Small Aperture Terminal (VSAT) systems to Packet Switched Public Data Networks (PSPDNs) |
9 | DS DS/EN 335-3-1996 | 1996-08-21 | English | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
10 | DS DS/EN 1619-1996 | 1996-08-21 | English | Biotechnology - Large-scale process and production - General requirements for management and organization for strain conservation procedures |
11 | DS DS/EN 60901-1996 | 1996-08-21 | English, French | Single-capped fluorescent lamps - Performance requirements |
12 | DS DS/EN ISO/IEC 11172-4-1996 | 1996-08-21 | English | Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Compliance testing |
13 | DS DS/EN 1102-1996 | 1996-08-21 | English | Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the flame spread of vertically oriented specimens |
14 | DS DS/EN 1101-1996 | 1996-08-21 | English | Textiles and textiles products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small flame) |
15 | DS DS/ETS 300581-4-1996 | 1996-08-21 | English | European digital cellular telecommunications system - Half rate speech - Part 4: Comfort noise aspects for the half rate speech traffic channels - (GSM 06.22) |
16 | DS DS/ETS 300581-5-1996 | 1996-08-21 | English | European digital cellular telecommunications system - Half rate speech - Part 5: Discontinuous transmission (DTX) for half rate speech traffic channels - (GSM 06.41) |
17 | DS DS/EN 12028-1996 | 1996-08-21 | English | Self adhesive tapes - Measurement of elongation under static load |
18 | DS DS/ETS 300433-1996 | 1996-08-13 | English | Radio Equipment and Systems (RES) - Double Side Band (DSB) and/or Single Side Band (SSB) amplitude modulated Citizens Band (CB) radio equipment - Technical characteristics and methods of measurement |
19 | DS DS/EN ISO 10280-1996 | 1996-07-03 | English | Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method |
20 | DS DS/EN ISO 6410-2-1996 | 1996-07-03 | Danish, English | Technical drawings - Screw threads and threaded parts - Part 2: Screw threads inserts |
21 | DS DS/EN ISO 6410-1-1996 | 1996-07-03 | Danish, English | Technical drawings - Screw threads and threaded parts - Part 1: General conventions |
22 | DS DS/EN ISO 10209-2-1996 | 1996-07-03 | Danish, English, French | Technical product documentation - Vocabulary - Part 2: Terms relating to projection methods |
23 | DS DS/EN 2068-1996 | 1996-07-03 | English | Aerospace series - Rod ends with self-lubricating self-aligning bearings - Technical specification |
24 | DS DS/EN 2067-1996 | 1996-07-03 | English | Aerospace series - Rod ends with self-aligning ball bearings - Technical specification |
25 | DS DS/ETS 300405/Cor.1-1996 | 1996-07-03 | English | Network Aspects (NA) - Metropolitan Area Network (MAN) - Interconnection of MAN Switching Systems (MSS) based on an Asynchronous Transfer Mode (ATM) interface |
26 | DS DS/EN ISO 6410-3-1996 | 1996-07-03 | Danish, English | Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation |
27 | DS DS/ETS 300581-6-1996 | 1996-07-03 | English | European digital cellular telecommunications system - Half rate speech - Part 6: Voice Activity Detector (VAD) for half rate speech traffic channels (GSM 06.42) |
28 | DS DS/EN 3380-1996 | 1996-07-03 | English | Aerospace series - Rings, retaining - Technical specification |
29 | DS DS/EN 4069-1996 | 1996-07-03 | English | Aerospace series - Nuts, hexagon, plain, reduced height, reduced across flats, in heat resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/650 °C |
30 | DS DS/EN 2104-1996 | 1996-07-03 | English | Aerospace series - Acrylonitrile-butadiene rubber (NBR) - Hardness 40 IRHD |
31 | DS DS/EN 61229-1996 | 1996-07-03 | English, French | Rigid protective covers for live working on a.c. installations |
32 | DS DS/EN ISO 7437-1996 | 1996-07-03 | English | Technical drawings - Construction drawings - General rules for execution of production drawings for prefabricated structural components |
33 | DS DS/EN 2122-1996 | 1996-07-03 | English | Aerospace series - Washers, flat, in aluminium alloy, anodized or chromated |
34 | DS DS/ISO 5261-1996 | 1996-07-03 | Danish, English | Technical drawings - Simplified representation of bars and profile sections |
35 | DS DS/I-ETS 300404-1996 | 1996-07-03 | English | Broadband Integrated Services Digital Network (B-ISDN) - B-ISDN Operation And Maintenance (OAM) principles and functions |
36 | DS DS/I-ETS 300380-1996 | 1996-07-03 | English | Universal Personal Telecommunication (UPT) - Access devices - Dual Tone Multi Frequency (DTMF) sender for acoustical coupling to the microphone of a handset telephone |
37 | DS DS/ETS 300529-1996 | 1996-07-03 | English | European digital cellular telecommunications system (Phase 2) - Technical realization of supplementary services - (GSM 03.11) |
38 | DS DS/EN 313-1-1996 | 1996-07-03 | English | Plywood - Classification and terminology - Part 1: Classification |
39 | DS DS/CEN/CR 12361-1996 | 1996-07-03 | English | Destructive tests on welds in metallic materials - Etchants for macroscopic and microscopic examination |
40 | DS DS/EN 10211-1996 | 1996-07-03 | English | Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method |
41 | DS DS/ETS 300384-1996 | 1996-07-03 | English | Radio broadcasting systems - Very High Frequency (VHF), frequency modulated, sound broadcasting transmitters |
42 | DS DS/TBR 9-1996 | 1996-07-03 | English | European digital cellular telecommunications system - Attachment requirements for Global System for Mobile communications (GSM) mobile stations - Telephony |
43 | DS DS/ISO 5845-2-1996 | 1996-07-03 | Danish, English | Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment |
44 | DS DS/EN ISO 10700-1996 | 1996-07-03 | English | Steel and iron - Determination of manganese content - Flame atomic absorption spectrometric method |
45 | DS DS/ETS 300538-1996 | 1996-07-03 | English | European digital cellular telecommunications system (Phase 2) - Technical realization of facsimile group 3 transparent - (GSM 03.45) |
46 | DS DS/EN ISO 9400-1996 | 1996-07-03 | English | Nickel-based alloys - Determination of resistance to intergranular corrosion |
47 | DS DS/ETS 300399-3-1996 | 1996-07-03 | English | Frame relay services - Part 3: Frame relay data transmission service - Service definition |
48 | DS DS/EN 2884-1996 | 1996-07-03 | English | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature)/315 °C |
49 | DS DS/EN 2885-1996 | 1996-07-03 | English | Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
50 | DS DS/EN 2912-1996 | 1996-07-03 | English | Aerospace series - Washers, flat, large diameter, in aluminium alloy, anodized or chromated |
51 | DS DS/EN 50117-3-1996 | 1996-05-24 | English | Coaxial cables used in cabled distribution networks - Part 3: Sectional specification for outdoor drop cables |
52 | DS DS/EN 1945-1996 | 1996-05-24 | English | Self adhesive tapes - Measurement of quick stick |
53 | DS DS/EN ISO 9963-2-1996 | 1996-05-24 | English | Water quality - Determination of alkalinity - Part 2: Determination of carbonate alkalinity |
54 | DS DS/EN 61262-7-1996 | 1996-05-24 | English | Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function |
55 | DS DS/EN 50117-4-1996 | 1996-05-24 | English | Coaxial cables used in cabled distribution networks - Part 4: Sectional specification for distribution and trunk cables |
56 | DS DS/EN ISO 7345-1996 | 1996-05-24 | Danish, English | Thermal insulation - Physical quantities and definitions |
57 | DS DS/EN ISO 10712-1996 | 1996-05-24 | English | Water quality - Pseudomonas putida growth inhibition test (Psedomonas cell multiplication inhibition test) |
58 | DS DS/EN 61114-2-1996 | 1996-05-24 | English | Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas |
59 | DS DS/EN 60512-15-8-1996 | 1996-05-24 | English, French | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations. Section 8: Test 15h: Contact retention system resistance to tool application |
60 | DS DS/EN 60870-6-601-1996 | 1996-05-24 | English, French | Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 601: Functional Profile for providing the Connection-Oriented Transport Service in an End System connected via permanent ac |
61 | DS DS/EN 1053-1996 | 1996-05-24 | English | Plastics piping systems - Thermoplastics piping systems for non-pressure applications - Test method for watertightness |
62 | DS DS/EN 1055-1996 | 1996-05-24 | English | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling |
63 | DS DS/EN ISO 11547-1996 | 1996-05-24 | English | Small craft - Start-in-gear protection |
64 | DS DS/EN 61076-4-1996 | 1996-05-24 | English, French | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
65 | DS DS/EN 1054-1996 | 1996-05-24 | English | Plastics piping systems - Thermoplastics piping systems for soil and waste discharge - Test method for airtightness of joints |
66 | DS DS/EN ISO 9963-1-1996 | 1996-05-24 | English | Water quality - Determination of alkalinity - Part 1: Determination of total and composite alkalinity |
67 | DS DS/EN ISO 9887-1996 | 1996-05-24 | English | Water quality - Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium - Semi-continuous activated sludge method (SCAS) |
68 | DS DS/EN 60512-12-6-1996 | 1996-05-24 | English, French | Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering |
69 | DS DS/EN ISO 7827-1996 | 1996-05-24 | English | Water quality - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC) |
70 | DS DS/EN 855-1996 | 1996-05-24 | English | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
71 | DS DS/EN ISO 4119-1996 | 1996-05-24 | English | Pulps - Determination of stock concentration |
72 | DS DS/EN 61094-3-1996 | 1996-05-24 | English, French | Measurement microphones - Part 3: Primary method for free-field calibration of laboratory standard microphones by the reciprocity technique |
73 | DS DS/EN 50147-1-1996 | 1996-05-24 | English | Anechoic chambers - Part 1: Shield attenuation measurement |
74 | DS DS/EN 61094-4-1996 | 1996-05-24 | English, French | Measurement microphones - Part 4: Specifications for working standard microphones |
75 | DS DS/EN ISO 9251-1996 | 1996-05-24 | Danish, English | Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary |
76 | DS DS/EN 60917-2-2-1996 | 1996-05-24 | English, French | Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks |
77 | DS DS/EN 61241-2-2-1996 | 1996-05-24 | English | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers |
78 | DS DS/EN 1283-1996 | 1996-05-24 | English | Haemodialysers, haemodiafilters, haemofilters, haemoconcentrators and their extracorporeal circuits |
79 | DS DS/EN 1411-1996 | 1996-05-24 | English | Plastics piping and ducting systems - Thermoplastics pipes - Determination of resistance to external blows by the staircase method |
80 | DS DS/EN ISO 5079-1996 | 1996-05-24 | English | Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres |
81 | DS DS/EN 60835-2-8/A1-1996 | 1996-05-24 | English | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer |
82 | DS DS/EN ISO 13397-1-1996 | 1996-03-28 | English | Periodontal curettes, dental scalers and excavators - Part 1: General requirements |
83 | DS DS/EN ISO 3822-2-1996 | 1996-03-28 | English | Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for draw-off taps and mixing valves |
84 | DS DS/EN ISO 4267-2-1996 | 1996-03-28 | English | Petroleum and liquid petroleum products - Calculation of oil quantities - Part 2: Dynamic measurement |
85 | DS DS/EN 61319-1-1996 | 1996-03-28 | English, French | Interconnections of satellite receiving equipment - Part 1: Europe |
86 | DS DS/ISO 668-1996 | 1996-03-28 | English | Series 1 freight containers - Classification, dimensions and ratings |
87 | DS DS/EN 60721-3-7-1996 | 1996-03-28 | English, French | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use |
88 | DS DS/EN 60721-3-9 + A1-1996 | 1996-03-28 | English | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 9: Microclimates inside products |
89 | DS DS/EN ISO 6721-3-1996 | 1996-03-28 | English | Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method |
90 | DS DS/ISO/IEC 10861-1996 | 1996-03-28 | English | Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II |
91 | DS DS/ISO/IEC 10857-1996 | 1996-03-28 | English | Information technology - Microprocessor systems - Futurebus+ Logical protocol specification |
92 | DS DS/EN ISO 105-NO2-1996 | 1996-03-28 | English | Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching - Peroxide |
93 | DS DS/EN ISO 105-NO3-1996 | 1996-03-28 | English | Textiles - Tests for colour fastness - Part N03: Colour fastness to bleaching: Sodium chlorite (mild) |
94 | DS DS/EN 61329-1996 | 1996-03-28 | English, French | Sound system equipment - Methods of measuring and specifying the performance of sounders (electroacoustic transducers for tone production) |
95 | DS DS/EN ISO 105-NO4-1996 | 1996-03-28 | English | Textiles - Tests for colour fastness - Part N04: Colour fastness to bleaching: Sodium chlorite (severe) |
96 | DS DS/EN ISO 105-NO5-1996 | 1996-03-28 | English | Textiles - Tests for colour fastness - Part N05: Colour fastness to stoving |
97 | DS DS/EN 60721-1 + A2-1996 | 1996-03-28 | English | Classification of environmental conditions - Part 1: Environmental parameters and their severities |
98 | DS DS/EN ISO 6817-1996 | 1996-03-28 | English | Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters |
99 | DS DS/EN ISO 9455-2-1996 | 1996-03-28 | English | Soft soldering fluxes - Test methods - Part 2: Determination of non-volatile matter, ebulliometric method |
100 | DS DS/EN 60809-1996 | 1996-03-28 | English, French | Filament lamps for road vehicles - Dimensional, electrical and luminous requirements |
101 | DS DS/EN ISO 9455-3-1996 | 1996-03-28 | English | Soft soldering fluxes - Tests methods - Part 3: Determination of acid value, potentiometric and visual titration methods |
102 | DS DS/EN 1944-1996 | 1996-03-28 | English | Self adhesive tapes - Measurement of unwind adhesion at low speed |
103 | DS DS/CEN/CR 12172-1996 | 1996-03-28 | English | Numerical designation systems for metallic materials - Review of existing systems and recommendation for new systems |
104 | DS DS/CEN/CR 12250-1996 | 1996-03-28 | English | Biotechnology - Microorganisms - Further examination of organisms in support of the classification work carried out under directive 90/679/EEC |
105 | DS DS/CEN/CR 12292-1996 | 1996-03-28 | English | Biotechnology - Microorganisms - Examination of the various existing lists of plant pathogens and production of a report |
106 | DS DS/EN 60155 + A1-1996 | 1996-03-28 | English, French | Glow-starters for fluorescent lamps |
107 | DS DS 471/Til.1-1996 | 1996-03-28 | Danish | Technical prevention against Burglar Attack |
108 | DS DS/EN ISO 8311-1996 | 1996-03-28 | English | Refrigerated light hydrocarbon fluids - Calibration of membrane tanks and independent prismatic tanks in ships - Physical measurement |
109 | DS DS/EN ISO 9391-1996 | 1996-03-28 | English | Water quality - Sampling in deep waters for macro-invertebrates - Guidance on the use of colonization, qualitative and quantitative samplers |
110 | DS DS/EN ISO 6551-1996 | 1996-03-28 | English | Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data |
111 | DS DS/EN 61069-5-1996 | 1996-03-28 | English, French | Industrial-process measurement and control - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability |
112 | DS DS/EN 1087-1-1996 | 1996-03-28 | English | Particleboards - Determination of moisture resistance - Part 1: Boil test |
113 | DS DS/EN 61249-5-1-1996 | 1996-03-28 | English, French | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
114 | DS DS/EN 61249-7-1-1996 | 1996-03-28 | English, French | Materials for interconnection structures - Part 7: Sectional specification set for restraining core materials - Section 1: Copper/Invar/copper |
115 | DS DS/EN 238-1996 | 1996-03-28 | English | Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry |
116 | DS DS/EN ISO 8316-1996 | 1996-03-28 | English | Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank |
117 | DS DS/EN ISO 7278-1-1996 | 1996-03-28 | English | Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 1: General principles |
118 | DS DS/EN ISO 7278-2-1996 | 1996-03-28 | English | Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers |
119 | DS DS/EN ISO 9455-9-1996 | 1996-03-28 | English | Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content |
120 | DS DS/ISO/IEC 9541-1/Cor.3-1996 | 1996-03-28 | English | Information technology - Font information interchange - Part 1: Architecture |
121 | DS DS/EN 60870-6-2-1996 | 1996-03-28 | English | Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - Section 2: Use of basic standards (OSI layers 1-4) |
122 | DS DS/EN 61610-1996 | 1996-03-28 | English, French | Prints and transparencies produced from electronic sources - Assessment of image quality |
123 | DS DS/ISO/IEC 9541-3-1996 | 1996-03-28 | English | Information technology - Font information interchange - Part 3: Glyph shape representation |
124 | DS DS/ISO/IEC 10180-1996 | 1996-03-28 | English | Information technology - Processing languages - Standard Page Description Language (SPDL) |
125 | DS DS/ISO/IEC 9541-2/Cor.2-1996 | 1996-03-28 | English | Information technology - Font information interchange - Part 2: Interchange format |
126 | DS DS/EN 61305-3-1996 | 1996-03-28 | English, French | Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 3: Amplifiers |
127 | DS DS/HD 543.2 S1-1996 | 1996-03-28 | English | Performance and testing of teleprotection equipment of power systems - Part 2: Analogue comparison systems |
128 | DS DS/EN ISO 10306-1996 | 1996-03-28 | English | Textiles - Cotton fibres - Evaluation of maturity by the air flow method |
129 | DS DS/EN 61305-1-1996 | 1996-03-28 | English, French | Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 1: General |
130 | DS DS/EN 60721-3-3-1996 | 1996-03-28 | English, French | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations |
131 | DS DS/EN 50090-2-1-1996 | 1996-03-28 | English | Home and Building Electronic Systems (HBES) - Part 2-1: System overview - Architecture |
132 | DS DS/EN 60268-12 + A2-1996 | 1996-03-28 | English | Sound system eqipment - Part 12: Application of connectors for broadcast and similar use |
133 | DS DS/EN ISO 2231-1996 | 1996-03-28 | English | Rubber- or plastics-coated fabrics - Standard atmospheres for conditioning and testing |
134 | DS DS/EN 718-1996 | 1996-03-01 | English | Resilient floor coverings - Determination of mass per unit area of a reinforcement or a backing of polyvinyl chloride floor coverings |
135 | DS DS/ETS 300423-1996 | 1996-03-01 | English | Satellite Earth Stations and Systems (SES) - Land Mobile Earth Stations (LMESs) operating in the 1,5/1,6 GHz bands providing voice and/or data communications |
136 | DS DS/ETS 300424-1996 | 1996-03-01 | English | Satellite Earth Stations and Systems (SES) - Network Control Facilities (NCFs) for Land Mobile Earth Stations (LMESs) operating in the 1,5/1,6 GHz bands providing voice and/or data communications |
137 | DS DS/EN ISO 3993-1996 | 1996-03-01 | English | Liquefied petroleum gas and light hydrocarbons - Determination of density or relative density - Pressure hydrometer method |
138 | DS DS/ISO/IEC 10183-1-1996 | 1996-03-01 | English | Information Technology - Open Document Architecture (ODA) and Interchange Format - Technical Report on ISO/IEC 8613 Implementation Testing - Part 3: Testing Procedures |
139 | DS DS/ISO/IEC 10166-2/Amd.1-1996 | 1996-03-01 | English | Information technology - Text and office systems - Document Filing and Retrieval (DFR) - Part 2: Protocol specification - Amendment 1: Minor enhancements for additional error |
140 | DS DS/ISO/IEC 10166-2/Cor.2-1996 | 1996-03-01 | English | Information technology - Text and office systems - Document Filing and Retrieval (DFR) - Part 2: Protocol specification - Technical Corrigendum 2 |
141 | DS DS/ISO/IEC 10166-1/Amd.1-1996 | 1996-03-01 | English | Information technology - Text and office systems - Document Filing and Retrieval (DFR) - Part 1: Abstract service definition and procedures Amendment 1: Minor enhancements |
142 | DS DS/EN 684-1996 | 1996-03-01 | English | Resilient floor coverings - Determination of seam strength |
143 | DS DS/EN 442-1-1996 | 1996-03-01 | English | Radiators and convectors - Part 1: Technical specifications and requirements |
144 | DS DS/ISO/IEC 13490-2-1996 | 1996-03-01 | English | Information technology - Volume and file structure of read-only and write-once compact disk media for information interchange - Part 2: Volume and file structure |
145 | DS DS/ISO/IEC 13614-1996 | 1996-03-01 | English | Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method |
146 | DS DS/ISO/IEC 13714-1996 | 1996-03-01 | English | Information technology - Document processing and related communication - User interface to telephone-based services - Voice messaging applications |
147 | DS DS/ISO/IEC 9637-1-1996 | 1996-03-01 | English | Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Data stream binding - Part 1: Character encoding |
148 | DS DS/ISO/IEC 9646-7-1996 | 1996-03-01 | English | Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements |
149 | DS DS/EN ISO 3830-1996 | 1996-03-01 | English | Petroleum products - Determination of lead content of gasoline - Iodine monochloride method |
150 | DS DS/EN 61547-1996 | 1996-03-01 | English | Equipment for general lighting purposes - EMC immunity requirements |
151 | DS DS/ISO/IEC 11544/Cor.1-1996 | 1996-03-01 | English | Information technology - Coded representation of picture and audio information - Progressive bi-level image compression - Technical Corrigendum 1 |
152 | DS DS/ISO/IEC 10918-2-1996 | 1996-03-01 | English | Information technology - Digital compression and coding of continuous-tone still images - Compliance testing |
153 | DS DS/ISO/IEC 10918-1-1996 | 1996-03-01 | English | Information technology - Digital compression and coding of continous-tone still images - Part 1: Requirements and guidelines |
154 | DS DS/ISO/IEC 13490-1-1996 | 1996-03-01 | English | Information technology - Volume and file structure of read-only and write-once compact disc media for information interchange - Part 1: General |
155 | DS DS/ISO/IEC 12088-4-1996 | 1996-03-01 | English | Information technology - Computer graphics and image processing - Image processing and interchange - Application program interface language bindings - Part 4: C |
156 | DS DS/TBR 5-1996 | 1996-03-01 | English | European digital cellular telecommunications system - Attachment requirements for Global System for Mobile communications (GSM) mobile stations - Access |
157 | DS DS/ISO/IEC 10728/A1-1996 | 1996-02-16 | English | Information technology - Information Resource Dictionary System (IRDS) - Service Interface AMENDMENT 1: C language binding |
158 | DS DS/ISO/IEC 8652-1996 | 1996-02-16 | English | Information technology - Programming languages - Ada |
159 | DS DS/ETS 300323-2-1996 | 1996-02-16 | English | Radio Equipment and Systems (RES) - Digital European Cordless Telecommunications (DECT) - Public Access Profile (PAP) test specification - Part 2: PT Abstract Test Suite (ATS) |
160 | DS DS/ETS 300455-1-1996 | 1996-02-16 | English | Broadband Integrated Services Digital Network (B-ISDN) - Broadband Virtual Path Service (BVPS) - Part 1: BVPS for Permanent communications (BVPS-P) |
161 | DS DS/ETS 300323-5-1996 | 1996-02-16 | English | Radio Equipment and Systems (RES) - Digital European Cordless Telecommunications (DECT) - Public Access Profile (PAP) test specification - Part 5: FT Abstract Test Suite (ATS) |
162 | DS DS/ISO/IEC 13403-1996 | 1996-02-16 | English | Information technology - Information interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the CCS method |
163 | DS DS/EN 60371-3-8-1996 | 1996-02-16 | English | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 8: Mica paper tapes for flame-resistant security cables |
164 | DS DS/EN 60371-3-7-1996 | 1996-02-16 | English | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping |
165 | DS DS/EN 60626-1-1996 | 1996-02-16 | English | Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements |
166 | DS DS/ETS 300511-1996 | 1996-02-16 | English | European digital cellular telecommunications system (Phase 2) - Man-Machine Interface (MMI) of the Mobile Station (MS) - (GSM 02.30) |
167 | DS DS/ETS 300297-1996 | 1996-02-16 | English | Integrated Services Digital Network (ISDN) - Access digital section for ISDN basic access |
168 | DS DS/HD 384.5.52 S1-1996 | 1996-02-16 | English | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 52: Wiring systems |
169 | DS DS/ETS 300591-1996 | 1996-02-16 | English | European digital cellular telecommunications system (Phase 2) - Rate adaption on the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface - (GSM 08.20) |
170 | DS DS/ETS 300592-1996 | 1996-02-16 | English | European digital cellular telecommunications system (Phase 2) - Base Station Controller - Base Transceiver Station (BSC - BTS) interface - General aspects - (GSM 08.51) |
171 | DS DS/EN ISO/IEC 7498-1-1996 | 1996-02-16 | English | Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Model |
172 | DS DS/ISO/IEC 9576-1-1996 | 1996-02-16 | English | Information technology - Open Systems Interconnection - Connectionless Presentation protocol: Protocol specification |
173 | DS DS/EN ISO/IEC 9661-1996 | 1996-02-16 | English | Information technology - Data interchange on 12,7 mm wide magnetic tape cartridges - 18 tracks, 1 491 data bytes per millimetre |
174 | DS DS/EN 60819-1-1996 | 1996-02-16 | English | Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements |
175 | DS DS/I-ETS 300045-1-1996 | 1996-02-16 | English | European digital cellular telecommunications system (Phase 1) - Subscriber Identity Module - Mobile Equipment (SIM-ME) interface specification - Part 1: Generic (GSM 11.11) |
176 | DS DS/EN 1038-1996 | 1996-02-16 | English | Identification card systems - Telecommunication applications - Integrated circuit(s) card payphone |
177 | DS DS/EN 60061-4/A1-1996 | 1996-02-16 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
178 | DS DS/ETS 300410-1996 | 1996-02-16 | English | Integrated Services Digital Network (ISDN) - File Transfer & Access Management (FTAM) teleservice - Service description |
179 | DS DS/ETS 300409-1996 | 1996-02-16 | English | Integrated Services Digital Network (ISDN) - Eurofile transfer teleservice - Service description |
180 | DS DS/ISO/IEC 13842-1996 | 1996-02-16 | English | Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2 Gbytes per cartridge |
181 | DS DS/EN 60371-3-9-1996 | 1996-02-16 | English | Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 9: Moulding micanite |
182 | DS DS/EN 61733-1-1996 | 1996-02-16 | English, French | Measuring relays and protection equipment - Protection communication interfacing - Part 1: General |
183 | DS DS/EN 61050 + A1-1996 | 1996-02-16 | English, French | Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers) - General and safety requirements |
184 | DS DS/ENV 1250-2-1996 | 1996-02-16 | English | Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 2: Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water |
185 | DS DS/ENV 1250-1-1996 | 1996-02-16 | English | Wood preservatives - Methods for measuring losses of active ingredients and other preservative ingredients from treated timber - Part 1: Laboratory method for obtaining samples for analysis to measure losses by evaporation to air |
186 | DS DS/ETS 300373-1996 | 1996-02-16 | English | Radio Equipment and Systems (RES) - Technical characteristics and methods of measurement for maritime mobile transmitters and receivers for use in the MF and HF bands |
187 | DS DS/EN 1306-1996 | 1996-02-16 | English | Inland navigation vessels. Connections for the discharge of waste water |
188 | DS DS/INF 111-1996 | 1996-02-16 | Danish | Distribution plant of industrial gases at users works |
189 | DS DS/EN 1305-1996 | 1996-02-16 | English | Inland navigation vessels - Connections for the discharge of oily mixture |
190 | DS DS/EN 60672-1-1996 | 1996-02-16 | English | Ceramic and glass insulating materials - Part 1: Definitions and classification |
191 | DS DS/EN 61302-1996 | 1996-02-16 | English | Electrical insulating materials - Method to evaluate the resistance to tracking and erosion - Rotating wheel dip test |
192 | DS DS/EN 60118-2-1996 | 1996-02-16 | English, French | Hearing aids - Part 2: Hearing aids with automatic gain control circuits |
193 | DS DS/EN 61169-1-1996 | 1996-02-16 | English | Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
194 | DS DS/INF 112-1996 | 1996-02-14 | English | Instructions for use of products of consumer interest |
195 | DS DS/ISO/IEC 8441-2-1996 | 1996-02-14 | English | Information technology - High density digital recording (HDDR) - Part 2: Guide for interchange practice |
196 | DS DS/EN 60255-21-1-1996 | 1996-02-14 | English, French | Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 1: Vibration tests (sinusoidal) |
197 | DS DS/EN 50077 + Corr.-1996 | 1996-02-14 | English | Low-profile connector for implantable cardiac pacemakers |
198 | DS DS/EN 60061-1/A3-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
199 | DS DS/EN 60662 + A4,5,6,7-1996 | 1996-02-14 | English, French | High-pressure sodium vapour lamps |
200 | DS DS/EN 60061-4/A2-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
201 | DS DS/EN 10055-1996 | 1996-02-14 | English | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
202 | DS DS/ETS 300010-1-1996 | 1996-02-14 | English | Transmission and Multiplexing (TM) - Synchronous cross connect equipment - 64 and n x 64 kbit/s cross connection rate - 2 048 kbit/s access ports - Part 1: Core functions and characteristics |
203 | DS DS/EN 61068-3-1-1996 | 1996-02-14 | English | Polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Tapes woven on conventional or shuttleless looms |
204 | DS DS/EN 60061-3/A2-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
205 | DS DS/EN 60255-21-2-1996 | 1996-02-14 | English, French | Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests |
206 | DS DS/HD 609 S1-1996 | 1996-02-14 | English | Sectional specification for equipment cables to be used for digital and analogue communication |
207 | DS DS/ISO/IEC 10536-2-1996 | 1996-02-14 | English | Identification cards - Contactless integrated circuit(s) cards - Part 2: Dimensions and location of coupling areas |
208 | DS DS/EN 60626-2-1996 | 1996-02-14 | English | Combined flexible materials for electrical insulation - Part 2: Methods of test |
209 | DS DS/EN 1388-1-1996 | 1996-02-14 | English | Materials and articles in contact with foodstuffs - Silicate surfaces - Part 1: Determination of the release of lead and cadmium from ceramic ware |
210 | DS DS/EN 60061-1/A2-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
211 | DS DS/EN 1388-2-1996 | 1996-02-14 | English | Materials and articles in contact with foodstuffs - Silicate surfaces - Part 2: Determination of the release of lead and cadmium from silicate surfaces other than ceramic ware |
212 | DS DS/EN 61260-1996 | 1996-02-14 | English, French | Electroacoustics - Octave-band and fractional-octave-band filters |
213 | DS DS/ISO/IEC 10731-1996 | 1996-02-14 | English | Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services |
214 | DS DS/EN 60870-5-5-1996 | 1996-02-14 | English | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 5: Basic application functions |
215 | DS DS/EN 60870-5-4-1996 | 1996-02-14 | English | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 4: Definition and coding of application information elements |
216 | DS DS/EN 10265-1996 | 1996-02-14 | English | Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
217 | DS DS/EN 60601-2-28-1996 | 1996-02-14 | English, French | Medical electrical equipment - Part 2: Particular requirements for the safety of X-ray source assemblies and X-ray tube assemblies for medical diagnosis |
218 | DS DS/EN 60061-3/A3-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
219 | DS DS/EN 60870-5-3-1996 | 1996-02-14 | English | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structure of application data |
220 | DS DS/EN 60870-5-2-1996 | 1996-02-14 | English | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures |
221 | DS DS/EN ISO 6806-1996 | 1996-02-14 | English | Rubber hoses and hose assemblies for use in oil burners - Specification |
222 | DS DS/EN 60870-5-1-1996 | 1996-02-14 | English | Telecontrol equipment and systems - Part 5: Transmission protocols - Section one: Transmission frame formats |
223 | DS DS/EN 60061-2/A3-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
224 | DS DS/EN 726-2-1996 | 1996-02-14 | English | Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 2: Security framework |
225 | DS DS/EN 60061-2/A2-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
226 | DS DS/ETS 300589-1996 | 1996-02-14 | English | European digital cellular telecommunications system (Phase 2) - Signalling transport mechanism specification for the Base Station System - Mobile-services Switching Centre (BSS - MSC) interface - (GSM 08.06) |
227 | DS DS/ETS 300586-1996 | 1996-02-14 | English | European digital cellular telecommunications system (Phase 2) - Use of the V series Data Terminal Equipment - Data Circuit terminating Equipment (DTE - DCE) interface at the Mobile Station (MS) for Mobile Termination (MT) configuration - (GSM 07.06) |
228 | DS DS/EN ISO 6346-1996 | 1996-02-14 | English | Freight containers - Coding, identification and marking |
229 | DS DS/EN 726-6-1996 | 1996-02-14 | English | Identification card systems - Telecommunications integrated circuit(s) cards and terminals - Part 6: Telecommunication features |
230 | DS DS/EN 60061-4/A3-1996 | 1996-02-14 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
231 | DS DS/ISO 1161/Cor.1-1996 | 1996-02-14 | English | Series 1 freight containers - Corner fittings - Specification |
232 | DS DS/ETS 300594-1996 | 1996-02-14 | English | European digital cellular telecommunications system (Phase 2) - Base Station Controlller - Base Transceiver Station (BSC - BTS) interface - Layer 1 structure of physical circuits - (GSM 08.54) |
233 | DS DS/ETS 300587-2-1996 | 1996-02-14 | English | European digital cellular telecommunications system (Phase 2) - Base Station System - Mobile-services Switching Centre (BSS - MSC) interface - Interface principles - (GSM 08.02) |
234 | DS DS/ETS 300413-1996 | 1996-02-14 | English | Transmission and Multiplexing (TM) - Multiplex section protection information model for the Network Element (NE) view |
235 | DS DS/EN 10221-1996 | 1996-02-14 | English | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
236 | DS DS/EN ISO 7864-1996 | 1996-01-17 | English | Sterile hypodermic needles for single use |
237 | DS DS/EN 863-1996 | 1996-01-17 | English | Protective clothing - Mechanical properties - Test method: Puncture resistance |
238 | DS DS/EN ISO 9167-1-1996 | 1996-01-17 | English | Rapeseed - Determination of glucosinolates content - Part 1: Method using high-performance liquid chromatography |
239 | DS DS/EN 10052-1996 | 1996-01-17 | Danish, English | Vocabulary of heat treatment terms for ferrous products |
240 | DS DS/ENV ISO 10303-1-1996 | 1996-01-17 | English | Industrial automation systems and integration - Product data representation and exchange - Part 1: Overview and fundamental principles |
241 | DS DS/EN ISO 10323-1996 | 1996-01-17 | English | Dental rotary instruments - Bore diameters for discs and wheels |
242 | DS DS/EN ISO 9687-1996 | 1996-01-17 | English | Dental equipment - Graphical symbols |
243 | DS DS/ENV ISO 10303-201-1996 | 1996-01-17 | English | Industrial automation systems and integration - Product data representation and exchange - Part 201: Application protocol: Explicit draughting |
244 | DS DS/ENV ISO 10303-31-1996 | 1996-01-17 | English | Industrial automation systems and integration - Product data representation and exchange - Part 31: Conformance testing methodology and framework: General concepts |
245 | DS DS/EN ISO 1873-1-1996 | 1996-01-17 | English | Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications |
246 | DS DS/EN ISO 10592-1996 | 1996-01-17 | English | Small craft - Hydraulic steering systems |
247 | DS DS/EN ISO 898-6-1996 | 1996-01-17 | English | Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread |
248 | DS DS/EN ISO 9289-1996 | 1996-01-17 | English | Oilseed residues - Determination of free residual hexane |
249 | DS DS/EN ISO 527-3-1996 | 1996-01-17 | English | Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets |
250 | DS DS/CEN/CR 1832-1996 | 1996-01-17 | English | CIM Systems Architecture - Enterprise model execution and integration services - Statement of requirements |
251 | DS DS/CEN/CR 1831-1996 | 1996-01-17 | English | CIM System Architecture - Enterprise model execution and integration services - Evaluation report |
252 | DS DS/CEN/CR 1830-1996 | 1996-01-17 | English | CIM Systems Architecture - Vocabulary |
253 | DS DS/EN 124-1996 | 1996-01-17 | English | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
254 | DS DS/ISO/IEC 6429-1995 | 1995-12-20 | English | Information technology - Control functions for coded character sets |
255 | DS DS/EN ISO 5961-1995 | 1995-12-20 | English | Water quality - Determination of cadmium by atomic absorption spectrometry |
256 | DS DS/HD 368 S1-1995 | 1995-12-20 | English, French | Direct acting recording electrical measuring instruments and their accessories |
257 | DS DS/ISO/IEC 8613-11-1995 | 1995-12-20 | English | Information technology - Open Document Architecture (ODA) and interchange format: Identification of document fragments - Part 11: Tabular structures and tabular layout |
258 | DS DS/EN 61143-2-1995 | 1995-12-20 | English, French | Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test methods |
259 | DS DS/EN 1412-1995 | 1995-12-20 | English | Copper and copper alloys - European numbering system |
260 | DS DS/EN 60317-40-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 40: Glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200 |
261 | DS DS/EN 61143-1-1995 | 1995-12-07 | English, French | Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements |
262 | DS DS/EN 844-3-1995 | 1995-12-07 | Danish, English, French, German | Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber |
263 | DS DS/EN 60061-4-1995 | 1995-12-07 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information |
264 | DS DS/EN 60730-2-7 + A11,12-1995 | 1995-12-07 | English | Automatic electrical controls for household and similar use - Part 2: Particular requirements for timers and time switches |
265 | DS DS/EN 60811-1-2-1995 | 1995-12-07 | English | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 2: Thermal ageing methods |
266 | DS DS/EN ISO 9664-1995 | 1995-12-07 | English | Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear |
267 | DS DS/EN 60317-23-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 |
268 | DS DS/EN 60811-1-1-1995 | 1995-12-07 | English | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
269 | DS DS/EN 60811-1-3-1995 | 1995-12-07 | English | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 3: Methods for determining the density - Water absorption tests - Shrinkage test |
270 | DS DS/EN 844-1-1995 | 1995-12-07 | Danish, English, French, German | Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber |
271 | DS DS/EN 60811-1-4-1995 | 1995-12-07 | English | Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 4: Test at low temperature |
272 | DS DS/EN 61067-3-1-1995 | 1995-12-07 | English, French | Glass and glass polyester fibre woven tapes - Part 3: Specifications for individual materials - Sheet 1: Type 1, 2 and 3 tapes |
273 | DS DS/EN 60051-2-1995 | 1995-12-07 | English, French | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters |
274 | DS DS/EN 286-2 + AC-1995 | 1995-12-07 | English | Simple unfired pressure vessels designed to contain air or nitrogen - Part 2: Pressure vessels for air braking and auxiliary systems for motor vehicles and their trailers |
275 | DS DS/EN ISO 10363-1995 | 1995-12-07 | English | Hot-melt adhesives - Determination of thermal stability |
276 | DS DS/EN 60068-2-65-1995 | 1995-12-07 | English, French | Environmental testing - Part 2: Methods of test - Test Fg: Vibration, acoustically induced |
277 | DS DS/EN ISO 10365-1995 | 1995-12-07 | English | Adhesives - Designation of main failure patterns |
278 | DS DS/EN 60933-4-1995 | 1995-12-07 | English | Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) |
279 | DS DS/EN 60811-3-1-1995 | 1995-12-07 | English | Insulating and sheathing materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 1: Pressure test at high temperature - Tests for resistance to cracking |
280 | DS DS/EN ISO 10370-1995 | 1995-12-07 | English | Petroleum products - Dermination of carbon residue - Micro method |
281 | DS DS/EN 60317-39-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 39: Glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180 |
282 | DS DS/EN 60598-2-18-1995 | 1995-12-07 | English, French | Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications |
283 | DS DS/EN 286-3-1995 | 1995-12-07 | English | Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock |
284 | DS DS/EN 60730-2-15-1995 | 1995-12-07 | English | Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical water level sensing controls of the float or electrode-sensor type used in boiler applications |
285 | DS DS/EN 60317-38-1995 | 1995-12-07 | English | Specifications for particular types of winding wire - Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer |
286 | DS DS/ISO/IEC 8613-2-1995 | 1995-12-07 | English | Information technology - Open Document Architecture (ODA) and interchange format: Document structures |
287 | DS DS/EN 60317-37-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer |
288 | DS DS/EN 60317-36-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer |
289 | DS DS/EN ISO 8780-3-1995 | 1995-12-07 | English | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill |
290 | DS DS/EN ISO 8780-2-1995 | 1995-12-07 | English | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2: Dispersion using an oscillatory shaking machine |
291 | DS DS/EN 60204-3-1-1995 | 1995-12-07 | English | Electrical equipment of industrial machines - Part 3: Particular requirements for sewing machines, units and systems |
292 | DS DS/EN ISO 8780-1-1995 | 1995-12-07 | English | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1: Introduction |
293 | DS DS/EN 60317-35-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer |
294 | DS DS/EN 60068-2-44-1995 | 1995-12-07 | English, French | Environmental testing - Part 2: Tests - Guidance on Test T: Soldering |
295 | DS DS/EN 50080-1995 | 1995-12-07 | English | RF characteristics of MAC AM-VSB cable receivers |
296 | DS DS/EN 634-1-1995 | 1995-12-07 | English | Cement-bonded particleboards - Specification - Part 1: General requirements |
297 | DS DS/EN 61255-1995 | 1995-12-07 | English, French | Household electric heating pads - Methods for measuring performance |
298 | DS DS/EN 635-1-1995 | 1995-12-07 | English | Plywood - Classification by surface appearance - Part 1: General |
299 | DS DS/EN 60061-1 + A1-1995 | 1995-12-07 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
300 | DS DS/EN 60704-2-2-1995 | 1995-12-07 | English, French | Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2: Particular requirements for forced draught convection heaters |
301 | DS DS/EN 60634-1995 | 1995-12-07 | English, French | Heat test source (H.T.S.) lamps for carrying out heating tests on luminaires |
302 | DS DS/EN 60156-1995 | 1995-12-07 | English | Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
303 | DS DS/EN 60619 + Corr. + A1-1995 | 1995-12-07 | English, French | Electrically operated food preparation appliances - Methods for measuring the performance |
304 | DS DS/EN 60051-4-1995 | 1995-12-07 | English, French | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 4: Special requirements for frequency meters |
305 | DS DS/EN 60068-1-1995 | 1995-12-07 | English, French | Environmental testing - Part 1: General and guidance |
306 | DS DS/EN 1502-1995 | 1995-12-07 | English | Inland navigation vessels - Boarding ladders |
307 | DS DS/EN 60061-3 + A1-1995 | 1995-12-07 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
308 | DS DS/EN ISO 9029-1995 | 1995-12-07 | English | Crude petroleum - Determination of water - Distillation method |
309 | DS DS/EN 60523-1995 | 1995-12-07 | English, French | Direct-current potentiometers |
310 | DS DS/EN 60034-18-21-1995 | 1995-12-07 | English | Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 21: Test procedures for wire-wound windings - Thermal evaluation and classification |
311 | DS DS/EN 60544-1-1995 | 1995-12-07 | English, French | Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry |
312 | DS DS/EN ISO 8781-3-1995 | 1995-12-07 | English | Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3: Assessment from the change in gloss |
313 | DS DS/EN 60564-1995 | 1995-12-07 | English, French | D.C. bridges for measuring resistance |
314 | DS DS/EN 60317-19-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 |
315 | DS DS/EN 60118-0 + A1-1995 | 1995-12-07 | English, French | Hearing aids - Part 0: Measurement of electroacoustical characteristics |
316 | DS DS/EN 61183-1995 | 1995-12-07 | English, French | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
317 | DS DS/EN ISO 3219 + AC-1995 | 1995-12-07 | English | Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate |
318 | DS DS/EN 60811-3-2-1995 | 1995-12-07 | English | Insulating and sheating materials of electric cables - Common test methods - Part 3: Methods specific to PVC compounds - Section 2: Loss of mass test - Thermal stability test |
319 | DS DS/EN ISO 8781-2-1995 | 1995-12-07 | English | Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2: Assessment from the change in fineness of grind |
320 | DS DS/EN ISO 8781-1-1995 | 1995-12-07 | English | Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1: Assessment from the change in tinting strength of coloured pigments |
321 | DS DS/EN 60317-21-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 |
322 | DS DS/EN 60317-20-1995 | 1995-12-07 | English | Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 |
323 | DS DS/EN 60674-3-4 til 6-1995 | 1995-12-07 | English, French | Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation |
324 | DS DS/EN 60675-1995 | 1995-12-07 | English, French | Household electric direct-acting room heaters - Methods for measuring performance |
325 | DS DS/EN 23270-1995 | 1995-12-07 | English | Paints and varnishes and their raw materials - Temperatures and humidities for conditioning and testing |
326 | DS DS/EN 60095-4 + A11-1995 | 1995-11-28 | English | Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy commercial vehicles |
327 | DS DS/ETS 300412-1995 | 1995-11-28 | English | Transmission and Multiplexing (TM) - Payload configuration information model for the Network Element (NE) view |
328 | DS DS/ETS 300585/A1-1995 | 1995-11-28 | English | European digital cellular telecommunications system (Phase 2) - Use of Data Terminal Equipment - Data Circuit terminating Equipment (DTE-DCE) interface for Short Message Service (SMS) and Cell Broadcast Service (CBS) (GSM 07.05) |
329 | DS DS/EN ISO/IEC 7942-1-1995 | 1995-11-28 | English | Information technology - Computer graphics and image processing - Graphical Kernel System (GKS) - Part 1: Functional description |
330 | DS DS/ETS 300603/A1-1995 | 1995-11-28 | English | European digital cellular telecommunications system (Phase 2) - Interworking between a Public Land Mobile Network (PLMN) and a Packet Switched Public Data Network/Integrated Services Digital Network (PSPDN/ISDN) for the support of packet switched data tra |
331 | DS DS/ETS 300411-1995 | 1995-11-28 | English | Transmission and Multiplexing (TM) - Performance monitoring information model for the Network Element (NE) view |
332 | DS DS/EN ISO 7622-2-1995 | 1995-11-28 | English | Steel cord conveyor belts - Longitudinal traction test - Part 2: Measurement of tensile strength |
333 | DS DS/ISO/IEC 9638-3-1995 | 1995-11-28 | English | Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings - Part 3: Ada |
334 | DS DS/EN ISO 7488-1995 | 1995-11-28 | English | Dental amalgamators |
335 | DS DS/ISO/IEC 8613-3-1995 | 1995-11-28 | English | Information technology - Open Document Architecture (ODA) and interchange format: Abstract interface for the manipulation of ODA documents |
336 | DS DS/ISO/IEC 8613-7-1995 | 1995-11-28 | English | Information technology - Open Document Architecture (ODA) and interchange format: Raster graphics content architectures |
337 | DS DS/ISO/IEC 8613-8-1995 | 1995-11-28 | English | Information technology - Open Document Architecture (ODA) and Interchange Format: Geometric graphics content architectures |
338 | DS DS/ISO/IEC 8613-10-1995 | 1995-11-28 | English | Information technology - Open Document Architecture (ODA) and Interchange Format - Part 10: Formal specifications |
339 | DS DS/ISO/IEC 11072-1995 | 1995-11-28 | English | Information technology - Computer graphics - Computer Graphics Reference Model |
340 | DS DS/EN 61049-1995 | 1995-11-28 | English, French | Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements |
341 | DS DS/EN ISO 7622-1-1995 | 1995-11-28 | English | Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation |
342 | DS DS/ISO/IEC 12087-3-1995 | 1995-11-28 | English | Information technology - Computer graphics and image processing - Image Processing and Interchange (IPI) - Functional specification - Part 3: Image Interchange Facility (IIF) |
343 | DS DS/ISO/IEC 12087-2-1995 | 1995-11-28 | English | Information technology - Computer graphics and image processing - Image Processing and Interchange (IPI) - Functional specification - Part 2: Programmers imaging kernel system application program interface |
344 | DS DS/ISO/IEC 12087-1-1995 | 1995-11-28 | English | Information technology - Computer graphics and image processing - Image Processing and Interchange (IPI) - Functional specification - Part 1: Common architecture for imaging |
345 | DS DS/CEN/CR 12161-1995 | 1995-11-28 | English | A method for defining profiles for healthcare |
346 | DS DS/ISO/IEC 10741-1-1995 | 1995-11-28 | English | Information technology - User system interfaces - Dialogue interaction - Part 1: Cursor control for text editing |
347 | DS DS/EN ISO 1797-2-1995 | 1995-11-28 | English | Dental rotary instruments - Shanks - Part 2: Shanks made of plastics |
348 | DS DS/CEN/CR 1030-1-1995 | 1995-11-28 | English | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 1: Engineering methods by design of machinery |
349 | DS DS/EN 911-1995 | 1995-11-16 | English | Plastics piping systems - Elastomeric sealing ring type joints and mechanical joints for thermoplastics pressure piping - Test method for leaktightness under external hydrostatic pressure |
350 | DS DS/EN ISO 8975-1995 | 1995-11-16 | English | Plastics - Phenolic resins - Determination of pH |
351 | DS DS/EN 10242-1995 | 1995-11-16 | English | Threaded pipe fitting in malleable cast iron |
352 | DS DS/EN ISO 1460-1995 | 1995-11-16 | Danish, English | Metallic coatings - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area |
353 | DS DS/EN 744-1995 | 1995-11-16 | English | Plastics piping and ducting systems - Thermoplastics pipes - Test method for resistance to external blows by the round-the-clock method |
354 | DS DS/EN ISO 3696-1995 | 1995-11-16 | English | Water for analytical laboratory use - Specification and test methods |
355 | DS DS/EN 625-1995 | 1995-11-16 | English | Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW |
356 | DS DS/EN ISO 8780-5-1995 | 1995-11-16 | English | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller |
357 | DS DS/EN ISO 8780-6-1995 | 1995-11-16 | English | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - part 6: Dispersion using a triple-roll-mill |
358 | DS DS/EN ISO 787-9-1995 | 1995-11-16 | English | General methods of test for pigments and extenders - Part 9: Determination of pH value of an aqueous suspension |
359 | DS DS/EN ISO 787-2-1995 | 1995-11-16 | English | General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C |
360 | DS DS/EN ISO 3678-1995 | 1995-11-16 | English | Paints and varnishes - Print-free test |
361 | DS DS/EN ISO 8780-4-1995 | 1995-11-16 | English | Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4: Dispersion using a bead mill |
362 | DS DS 2370-2-1995 | 1995-10-31 | Danish | Measuring equipment - Limit gauges - Part 2: Gap gauges and reference gauges for ISO-tolerances for 1-500 mm nominal size. Manufacturing tolerances and allowed deviations |
363 | DS DS/EN 2940-1995 | 1995-10-31 | English | Aerospace series - Screws, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/650 °C |
364 | DS DS 2370-3-1995 | 1995-10-31 | Danish | Measuring equipment - Limit gauges - Part 3: Plug gauges and spherical plug gauges for ISO-tolerances for 1-500 mm nominal size - Manufacturing tolerances and allowed deviations |
365 | DS DS/EN 2938-1995 | 1995-10-31 | English | Aerospace series - Screws, hexagon, head, threaded to head, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa (at ambient temperature)/ 650 °C |
366 | DS DS 2370-1-1995 | 1995-10-31 | Danish | Measuring equipment - Limit gauges - Part 1: Limit gauges and reference gauges for plain parts - Manufacturing tolerances and allowed deviations |
367 | DS DS/I-ETS 300400-1995 | 1995-10-31 | English | Integrated Services Digital Network (ISDN) - Telephony terminals - Payphones |
368 | DS DS/EN 3239-1995 | 1995-10-31 | English | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated thread - Classification: 1 210 MPa (at ambient temperature)/ 730 °C |
369 | DS DS/EN 2536-1995 | 1995-10-31 | English | Aerospace series - Hard anodizing of aluminium alloys |
370 | DS DS/EN 2489-1995 | 1995-10-31 | English | Aerospace series - Fibre reinforced plastics - Determination of the action of test fluids |
371 | DS DS 2369-1995 | 1995-10-31 | Danish | Measuring equipment - Feeler gauges |
372 | DS DS/EN 3212-1995 | 1995-10-31 | English | Aerospace series - Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution |
373 | DS DS/EN 2260-1995 | 1995-10-31 | English | Aerospace series - Silicone rubber (VMQ) - Hardness 60 IRHD |
374 | DS DS/EN 2262-1995 | 1995-10-31 | English | Aerospace series - Silicone rubber (VMQ/PVMQ) with high tear strength - Hardness 50 IRHD |
375 | DS DS/EN 2428-1995 | 1995-10-31 | English | Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 50 IRHD |
376 | DS DS/EN 2429-1995 | 1995-10-31 | English | Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 60 IRHD |
377 | DS DS/EN 2430-1995 | 1995-10-31 | English | Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 70 IRHD |
378 | DS DS/EN 2431-1995 | 1995-10-31 | English | Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 80 IRHD |
379 | DS DS/EN 2432-1995 | 1995-10-31 | English | Aerospace series - Ethylene-propylene rubber (EPM/EPDM) - Hardness 90 IRHD |
380 | DS DS/EN 2561-1995 | 1995-10-31 | English | Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction |
381 | DS DS/ETS 300399-2-1995 | 1995-10-31 | English | Frame relay services Part 2: Integrated Services Digital Network (ISDN) - Frame relay bearer service - Service definition |
382 | DS DS/EN 2259-1995 | 1995-10-31 | English | Aerospace series - Silicone rubber (VMQ) - Hardness 50 IRHD |
383 | DS DS/EN 2261-1995 | 1995-10-31 | English | Aerospace series - Silicone rubber (VMQ) - Hardness 70 IRHD |
384 | DS DS/EN 2907-1995 | 1995-10-31 | English | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature) /650 °C |
385 | DS DS/EN ISO 1660-1995 | 1995-10-31 | Danish, English | Technical drawings - Dimensioning and tolerancing of profiles |
386 | DS DS/EN ISO 6509-1995 | 1995-10-31 | English | Corrosion of metals and alloys - Determination of dezincification resistance of brass |
387 | DS DS/EN 2378-1995 | 1995-10-31 | English | Aerospace series - Fibre reinforced plastics - Determination of water absorption by immersion |
388 | DS DS/EN 3012-1995 | 1995-10-31 | English | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1 210 MPa (at ambient temerature)/730 °C |
389 | DS DS/EN 3013-1995 | 1995-10-31 | English | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy), silver plated - Classification: 1 210 MPa (at ambient temperature)/730 °C |
390 | DS DS/ETS 300406-1995 | 1995-10-31 | English | Methods for Testing and Specification (MTS) - Protocol and profile conformance testing specifications - Standardization methodology |
391 | DS DS 813-1995 | 1995-10-31 | Danish | Interference joints - Calculation and design rules |
392 | DS DS 905-1995 | 1995-10-31 | Danish | Truck - Nominal and rated capacity - Definition |
393 | DS DS/ETS 300500/A1-1995 | 1995-10-31 | English | European digital cellular telecommunications system (Phase 2) - Principles of telecommunication services supported by a GSM Public Land Mobile Network (PLMN) (GSM 02.01) |
394 | DS DS/EN ISO 2157-1995 | 1995-10-24 | English | Dental rotary instruments - Nominal diameters and designation code number |
395 | DS DS/EN 735-1995 | 1995-10-24 | English | Overall dimensions of rotodynamic pumps - Tolerances |
396 | DS DS/EN 734-1995 | 1995-10-24 | English | Side channel pumps PN 40 - Nominal duty point, main dimensions, designation system |
397 | DS DS/EN 733-1995 | 1995-10-24 | English | End-suction centrifugal pumps, rating with 10 bar with bearing bracket - Nominal duty point, main dimensions, designation system |
398 | DS DS/ISO/IEC 13962-1995 | 1995-10-24 | English | Information technology - Data interchange on 12,7 mm 112-track magnetic tape cartridges - DLT 2 format |
399 | DS DS/EN ISO 542-1995 | 1995-10-24 | English | Oilseeds - Sampling |
400 | DS DS/EN ISO 9944-1995 | 1995-10-24 | English | Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts |
401 | DS DS/EN 50060+A1-1995 | 1995-10-24 | English | Power sources for manual arc welding with limited duty |
402 | DS DS/EN ISO 4613-2-1995 | 1995-10-24 | English | Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
403 | DS DS/EN 60645-4-1995 | 1995-10-24 | English, French | Audiometers - Part 4: Equipment for extended high-frequency audiometry |
404 | DS DS/EN 10249-1-1995 | 1995-10-24 | English | Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions |
405 | DS DS/IEC 352-3-1995 | 1995-10-24 | English, French | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
406 | DS DS/EN 595-1995 | 1995-10-24 | English | Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour |
407 | DS DS/IEC 512-5-1995 | 1995-10-24 | English, French | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
408 | DS DS/ISO/IEC 11557-1995 | 1995-10-24 | English | Information technology - 3,81 mm wide magnetic tape cartridge for- information interchange - Helical scan recording - DDS-DC format using 60 m and 90 m length tapes. |
409 | DS DS/EN 392-1995 | 1995-10-24 | English | Glued laminated timber - Shear test of glue lines |
410 | DS DS/EN 10248-2-1995 | 1995-10-24 | English | Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
411 | DS DS/EN 10249-2-1995 | 1995-10-24 | English | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
412 | DS DS/EN 10248-1-1995 | 1995-10-24 | English | Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions |
413 | DS DS/INF 110-1995 | 1995-10-24 | Danish | Guide for the choice of plastic packaging for foods |
414 | DS DS/EN 61043-1995 | 1995-10-24 | English, French | Electroacoustics - Instruments for the measurement of sound intensity - Measurement with pairs of pressure sensing microphones |
415 | DS DS/EN 596-1995 | 1995-10-24 | English | Timber structures - Test methods - Soft body impact test of timber framed walls |
416 | DS DS/EN 841-1995 | 1995-10-24 | English | Bar coding - Symbology specifications - Format description |
417 | DS DS/INF 109-1995 | 1995-10-24 | English | Proposals for the braking of electrical vehicles |
418 | DS DS/EN 60064-1995 | 1995-10-24 | English, French | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
419 | DS DS/ISO/IEC 10090-1995 | 1995-10-24 | English | Information technology - 90 mm optical disk cartridges, rewritable and read only, for data interchange |
420 | DS DS/EN 60051-9+A1,2-1995 | 1995-10-24 | English, French | Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods |
421 | DS DS/ISO/IEC 13422-1995 | 1995-10-24 | English | Information technology - Data interchange on 90 mm Flexible Disk Cartridges 10 MByte capacity using sector servo tracking - ISO Type 304 |
422 | DS DS/EN ISO 5508-1995 | 1995-10-24 | English | Animal and vegetable fats and oils - Analysis by gas chromatography of methyl esters of fatty acids |
423 | DS DS/EN 61252-1995 | 1995-10-24 | English, French | Electroacoustics - Specifications for personal sound exposure meters |
424 | DS DS/EN 60865-1-1995 | 1995-10-24 | English | Short-circuit currents - Calculation of effects - Part 1: Definitions and calculation methods |
425 | DS DS/ISO 10209-1-1995 | 1995-10-24 | Danish, English | Technical product documentation - Vocabulary - Part 1: Terms relating to technical drawings: general and types of drawings |
426 | DS DS/EN 627-1995 | 1995-10-24 | English | Specification for data logging and monitoring of lifts, escalators and passenger conveyors |
427 | DS DS/ISO/IEC 10745-1995 | 1995-10-24 | English | Information technology - Open Systems Interconnection - Upper layers security model |
428 | DS DS/IEC 512-9-1995 | 1995-10-24 | English, French | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests |
429 | DS DS/EN ISO 11963-1995 | 1995-10-24 | English | Plastics - Polycarbonate sheets - Types, dimensions and characteristics |
430 | DS DS/EN 2649-1995 | 1995-10-02 | English | Aerospace series - Screws, pan head, slotted, threaded to head, in alloy steel, cadmium plated - Classification: 900 MPa (at ambient temperature)/235 °C |
431 | DS DS/EN 512-1995 | 1995-10-02 | English | Fibre-cement products - Pressure pipes and joints |
432 | DS DS/EN ISO 787-18-1995 | 1995-10-02 | English | General methods of test for pigments and extenders - Part 18: Determination of residue on sieve - Mechanical flushing procedure |
433 | DS DS/EN 2909-1995 | 1995-10-02 | English | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature)/650 °C |
434 | DS DS/EN 2911-1995 | 1995-10-02 | English | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa (at ambient temperature) /650 °C |
435 | DS DS/EN 60371-3-6-1995 | 1995-10-02 | English, French | Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder |
436 | DS DS/EN 2648-1995 | 1995-10-02 | English | Aerospace series - Washers, concave, in alloy steel, cadmium plated |
437 | DS DS/IEC 512-7-1995 | 1995-10-02 | English | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests |
438 | DS DS/EN 60371-3-3-1995 | 1995-10-02 | English, French | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 3: Specification for rigid mica materials for heating equipment |
439 | DS DS/IEC 512-8-1995 | 1995-10-02 | English | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
440 | DS DS/EN 60371-3-4-1995 | 1995-10-02 | English, French | Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 4: Polyester film-backed mica paper with a B-stage epoxy resin binder |
441 | DS DS/EN 295-4-1995 | 1995-10-02 | English | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adaptors and compatible accessories |
442 | DS DS/EN 60835-1-1-1995 | 1995-10-02 | English, French | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 1: General |
443 | DS DS/EN 3722-1995 | 1995-10-02 | English | Aerospace series - Shank nuts, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) /425 °C |
444 | DS DS/EN 350-1-1995 | 1995-10-02 | English | Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood |
445 | DS DS/EN 350-2-1995 | 1995-10-02 | English | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
446 | DS DS/EN 460-1995 | 1995-10-02 | English | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
447 | DS DS/I-ETS 300031/A1-1995 | 1995-10-02 | English | European digital cellular telecommunications system (Phase 1) - Channel coding |
448 | DS DS/EN 3721-1995 | 1995-10-02 | English | Aerospace series - Nuts, bihexagonal, self-locking, deep counterbored, in heat resisting steel, FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) /425 °C |
449 | DS DS/EN 3720-1995 | 1995-10-02 | English | Aerospace series - Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA92HT (A286), MoS2 coated - Classification: 1 100 MPa (at ambient temperature) /425 °C |
450 | DS DS/EN 295-5-1995 | 1995-10-02 | English | Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 5: Requirements for perforated vitrified clay pipes and fittings |
451 | DS DS/EN 60835-2-8-1995 | 1995-10-02 | English | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 8: Adaptive equalizer |
452 | DS DS/IEC 244-9-1995 | 1995-10-02 | English | Methods of measurement of radio transmitters - Part 9: Performance characteristics for television transposers |
453 | DS DS/HD 134.7 S2-1995 | 1995-10-02 | English | Radio-frequency connectors - Part 7: R.F. coaxial connector with inner diameter of outer conductor 9,5 mm (0,374 in) with bayonet lock - Characteristic impendance 50 ohms (Type C) |
454 | DS DS/EN 3151-1995 | 1995-10-02 | English | Aerospace series - Dowels, plain, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
455 | DS DS/EN 60835-3-5-1995 | 1995-10-02 | English | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 5: Up and down convertors |
456 | DS DS/EN 61235-1995 | 1995-10-02 | English | Live working - Insulating hollow tubes for electrical purposes |
457 | DS DS/ETS 300233/A1-1995 | 1995-10-02 | English | Integrated Services Digital Network (ISDN) - Access digital section for ISDN primary rate |
458 | DS DS/EN 60835-2-7-1995 | 1995-10-02 | English, French | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment |
459 | DS DS/EN 577-1995 | 1995-10-02 | English | Aluminium and aluminium alloys - Liquid metal - Specifications |
460 | DS DS/EN 575-1995 | 1995-10-02 | English | Aluminium and aluminium alloys - Master alloys produced by melting - Specifications |
461 | DS DS/IEC 244-5-1995 | 1995-10-02 | English | Methods of measurement for radio transmitters - Part 5: Performance characteristics of television transmitters |
462 | DS DS/EN 61236-1995 | 1995-10-02 | English | Saddles, pole clamps (stick clamps) and accessories for live working |
463 | DS DS/EN 286-4-1995 | 1995-10-02 | English | Simple unfired pressure vessels designed to contain air or nitrogen - Part 4: Aluminium alloy pressure vessels designed for air braking equipment and auxiliary pneumatic eguipment for railway rolling stock |
464 | DS DS/EN 60835-2-3-1995 | 1995-10-02 | English | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 3: RF branching networks |
465 | DS DS/EN 3150-1995 | 1995-10-02 | English | Aerospace series - Pins, shoulder, headless, in heat resisting nickel base alloy NI-P100HT (Inconel 718) |
466 | DS DS/EN 3202-1995 | 1995-10-02 | English | Aerospace series - Holes and traps for T-head bolts - Design standard |
467 | DS DS/EN 60835-2-10-1995 | 1995-10-02 | English | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section ten: Overall system performance |
468 | DS DS/EN ISO 6708-1995 | 1995-10-02 | English | Pipework components - Definition and selection of DN (nominal size) |
469 | DS DS/EN 60835-2-1-1995 | 1995-10-02 | English, French | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 1: General |
470 | DS DS/IEC 244-8-1995 | 1995-10-02 | English | Methods of measurement for radio transmitters - Part 8: Performance characteristics of vestigal-sideband demodulators used for testing television transmitters and transposers |
471 | DS DS/EN 3611-1995 | 1995-10-02 | English | Aerospace series - Spigots - Dimensions and fit selection - Design standard |
472 | DS DS/EN 60835-2-2-1995 | 1995-10-02 | English, French | Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 2: Antenna |
473 | DS DS/EN ISO 787-5-1995 | 1995-09-06 | English | General methods of test for pigments and extenders - Part 5: Determination of oil absorption value |
474 | DS DS/EN 1235-1995 | 1995-09-06 | English | Solid fertilizers - Test sieving |
475 | DS DS/EN 100012-1995 | 1995-09-06 | English | Basic Specification: X-ray inspection of electronic components |
476 | DS DS/INF 108-1995 | 1995-09-06 | English | Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete |
477 | DS DS/EN 464-1995 | 1995-09-06 | English | Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) |
478 | DS DS/EN ISO 787-10-1995 | 1995-09-06 | English | General methods of test for pigments and extenders - Part 10: Determination of density - Pycnometer method |
479 | DS DS/EN 1237-1995 | 1995-09-06 | English | Fertilizers - Determination of bulk density (tapped) |
480 | DS DS/EN 60917-2-1-1995 | 1995-09-06 | English | Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1: Detail specification - Dimensions for cabine |
481 | DS DS/EN 50086-2-4-1995 | 1995-09-06 | English | Conduit systems for electrical installations - Part 2-4: Particular requirements for conduit systems buried underground |
482 | DS DS/EN 1236-1995 | 1995-09-06 | English | Fertilizers - Determination of bulk density (loose) |
483 | DS DS/EN ISO 787-24-1995 | 1995-09-06 | English | General methods of test for pigments and extenders - Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods |
484 | DS DS/EN 50109-2-3-1995 | 1995-09-06 | English | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
485 | DS DS/EN 50109-2-2-1995 | 1995-09-06 | English | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with remov |
486 | DS DS/ISO 7196-1995 | 1995-09-06 | English | Acoustics - Frequency-weighting characteristics for infrasound measurements |
487 | DS DS/ETS 300323-1/A1-1995 | 1995-09-06 | English | Radio Equipment and Systems (RES) - Digital European Cordless Telecommunications (DECT) - Public Access Profile (PAP) test specification - Part 1: Overview |
488 | DS DS/EN 60315-7-1995 | 1995-09-06 | English | Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers |
489 | DS DS/EN ISO 787-23-1995 | 1995-09-06 | English | General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) |
490 | DS DS/EN ISO 787-19-1995 | 1995-09-06 | English | General methods of test for pigments - Part 19: Determination of water-soluble nitrates (Salicylic acid method) |
491 | DS DS/EN 639-1995 | 1995-09-06 | English | Common requirements for concrete pressure pipes including joints and fittings |
492 | DS DS/EN ISO 787-16-1995 | 1995-09-06 | English | General methods of test for pigments and extenders - Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments - Visual comparison method |
493 | DS DS/EN ISO 787-15-1995 | 1995-09-06 | English | General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types |
494 | DS DS/EN ISO 787-11-1995 | 1995-09-06 | English | General methods of test for pigments and extenders - Part 11: Determination of tamped volume and apparent density after tamping |
495 | DS DS/EN 640-1995 | 1995-09-06 | English | Reinforced concrete pressure pipes and distributed reinforcement concrete pressure pipes (non-cylinder type), including joints and fittings |
496 | DS DS/EN 61727-1995 | 1995-09-06 | English | Photovoltaic (PV) systems - Characteristics of the utility interface |
497 | DS DS/ETS 300323-3/A1-1995 | 1995-09-06 | English | Radio Equipment and Systems (RES) - Digital European Cordless Telecommunications (DECT) - Public Access Profile (PAP) test specification - Part 3: PT PICS proforma |
498 | DS DS/ETS 300323-6/A1-1995 | 1995-09-06 | English | Radio Equipment and Systems (RES) - Digital European Cordless Telecommunications (DECT) - Public Access Profile (PAP) test specification - Part 6: FT PICS proforma |
499 | DS DS/EN 641-1995 | 1995-09-06 | English | Reinforced concrete pressure pipes, cylinder type, including joints and fittings |
500 | DS DS/EN 642-1995 | 1995-09-06 | English | Prestressed concrete pressure pipes, cylinder and non-cylinder, including joints, fittings and specific requirement for prestressing steel for pipes |
|