| Pos | standard Number | publication date | Language | Description |
| 1 | DS DS/EN 13975-2003 | 2003-05-15 | English | Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects |
| 2 | DS DS/EN 14084-2003 | 2003-05-15 | English | Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper and iron by atomic absorption spectrometry (AAS) after microwave digestion |
| 3 | DS DS/EN 300286-6 V.14.1-2003 | 2003-05-15 | English | Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Test |
| 4 | DS DS/EN 300286-5 V1.4.1-2003 | 2003-05-15 | English | Integrated Services Digital Network (ISDN); User-to-User Signalling (UUS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol; Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network |
| 5 | DS DS/EN 14218-2003 | 2003-05-15 | English | Hexagon nuts with flange - Fine pitch thread |
| 6 | DS DS/EN 302120 V1.1.1-2003 | 2003-05-15 | English | Services and Protocols for Advanced Networks (SPAN); Operation of the Bearer Independant Call Control (BICC) protocol with SIG.4/PNNI1.0/AINI signalling specification |
| 7 | DS DS/EN ISO 12005-2003 | 2003-05-15 | English | Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization |
| 8 | DS DS/EN 10162-2003 | 2003-05-15 | English | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| 9 | DS DS/EN 13244-4-2003 | 2003-05-05 | English | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 4: Valves |
| 10 | DS DS/EN 300356-36 V3.3.1-2003 | 2003-05-03 | English | Integrated Services Digital Network (ISDN); Signalling System No.7 (SS7); ISDN User Part (ISUP) version 3 for the international interface; Part 36: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proform |
| 11 | DS DS/EN 300392-1 V1.2.1-2003 | 2003-05-03 | English | Terrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 1: General network design |
| 12 | DS DS/EN 301933-1 V1.1.1-2003 | 2003-05-03 | English | Intelligent Network (IN); Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Test Suite Structure and Test Purposes (TSS&TP) specification for Service Switching Function (SSF); Part 1: Basic capability set of CS3 |
| 13 | DS DS/EN 10263-4+AC-2003 | 2003-05-02 | Danish, English | Steel rod, bars and wire for cold heading and cold extrusion - Part 4: Technical delivery conditions for steels for quenching and tempering |
| 14 | DS DS/EN 10263-3-2003 | 2003-05-02 | Danish, English | Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels |
| 15 | DS DS/EN 10263-2-2003 | 2003-05-02 | Danish, English | Steel rod, bars and wire for cold heading and cold extrusion - Part 2: Technical delivery conditions for steels not intended for heat treatment after cold working |
| 16 | DS DS/EN 12272-3-2003 | 2003-05-02 | English | Surface dressing - Test method - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method |
| 17 | DS DS/EN 10263-1+AC-2003 | 2003-05-02 | Danish, English | Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions |
| 18 | DS DS/EN 10263-5-2003 | 2003-05-02 | Danish, English | Steel rod, bars and steel wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels |
| 19 | DS DS/EN 1051-1-2003 | 2003-05-02 | English | Glass in building - Glass blocks and glass pavers - Part 1: Definitions and description |
| 20 | DS DS/EN 858-2-2003 | 2003-05-02 | English | Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance |
| 21 | DS DS/EN ISO 14557-2003 | 2003-05-01 | English | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies |
| 22 | DS DS/EN 1443-2003 | 2003-05-01 | English | Chimneys - General requirements |
| 23 | DS DS/ISO 834-9-2003 | 2003-05-01 | English | Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadbearing ceiling elements |
| 24 | DS DS/ISO 5660-2-2003 | 2003-05-01 | English | Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 2: Smoke production rate (dynamic measurement) |
| 25 | DS DS/EN 13938-3-2003 | 2003-05-01 | English | Explosives for civil uses - Propellants and rocket propellants - Part 3: Determination of deflagration of detonation transition |
| 26 | DS DS/EN 1899-1-2003 | 2003-04-30 | Danish, English | Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition |
| 27 | DS DS/EN 27888-2003 | 2003-04-30 | Danish, English | Water quality - Determination of electrical conductivity (ISO 7888:1985) |
| 28 | DS DS 2451-9-2003 | 2003-04-30 | Danish | Infection control in the health care sector - Part 9: Requirements for purchasing and maintenance of technical and medical equipment |
| 29 | DS DS 2451-1-2003 | 2003-04-30 | Danish | Infection control in the health care sector - Part 1:Requirements for procedures in general medical practice |
| 30 | DS DS/CEN/TR 14381-2003 | 2003-04-30 | English | Information technology - Character repertoire and coding transformations - European fallback rules |
| 31 | DS DS/ENV 12633-2003 | 2003-04-30 | English | Method of determination of unpolished and polished slip/skid resistance value |
| 32 | DS DS/EN ISO 228-2-2003 | 2003-04-30 | English | Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges |
| 33 | DS DS/EN ISO 2875-2003 | 2003-04-30 | English | Packaging - Complete, filled transport packages and unit loads - Water-spray test |
| 34 | DS DS/EN 25814-2003 | 2003-04-30 | Danish, English | Water quality - Determination of dissolved oxygen - Electrochemical probe method |
| 35 | DS DS/EN 12274-2-2003 | 2003-04-30 | English | Slurry surfacing - Test methods - Part 2: Determination of residual binder content |
| 36 | DS DS/EN 26777-2003 | 2003-04-30 | Danish, English | Water quality - Determination of nitrite - Molecular absorption spectrometric method |
| 37 | DS DS/EN 12274-5-2003 | 2003-04-30 | English | Slurry surfacing - Test method - Part 5: Determination of wearing |
| 38 | DS DS/CEN/TS 14442-2003 | 2003-04-30 | English | Postal services - Automated processing of mail items - Facing identification marks |
| 39 | DS DS/EN ISO 228-1-2003 | 2003-04-30 | English | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation |
| 40 | DS DS/EN 25813-2003 | 2003-04-30 | Danish, English | Water quality - Determination of dissolved oxygen - Iodometric method |
| 41 | DS DS/EN ISO 12777-3-2003 | 2003-04-25 | English | Methods of test for pallet joints - Part 3: Determination of strength of pallet joints |
| 42 | DS DS/EN 13593-2003 | 2003-04-25 | English | Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
| 43 | DS DS/EN ISO 2538-2003 | 2003-04-25 | Danish, English | Geometrical product specifications (GPS) - Series of angles and slopes on prisms |
| 44 | DS DS/EN 13913-2003 | 2003-04-25 | English | Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| 45 | DS DS/EN ISO 15783-2003 | 2003-04-25 | English | Seal-less rotodynamic pumps - Class II - Specification |
| 46 | DS DS/EN 14182-2003 | 2003-04-25 | English | Packaging - Terminology - Basic terms and definitions |
| 47 | DS DS/ISO 15629-2003 | 2003-04-25 | English | Pallets for materials handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| 48 | DS DS/EN ISO 868-2003 | 2003-04-25 | English | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) |
| 49 | DS DS/EN ISO 15982-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA |
| 50 | DS DS/EN ISO 16048-2003 | 2003-04-25 | English | Passivation of corrosion-resistant stainless-steel fasteners |
| 51 | DS DS/EN ISO 15981-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and protruding head - AIA/AIA |
| 52 | DS DS/EN ISO 16583-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt |
| 53 | DS DS/EN ISO 16672-2003 | 2003-04-25 | English | Ophthalmic implants - Ocular endotamponades |
| 54 | DS DS/EN ISO 15085-2003 | 2003-04-25 | English | Small craft - Man-overboard prevention and recovery |
| 55 | DS DS/EN 13949-2003 | 2003-04-25 | English | Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking |
| 56 | DS DS/EN ISO 11816-2-2003 | 2003-04-25 | English | Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Flourometric method for cheese |
| 57 | DS DS/EN 14048-2003 | 2003-04-25 | English | Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
| 58 | DS DS/EN ISO 643-2003 | 2003-04-25 | English | Steels - Micrographic determination of the apparent grain size |
| 59 | DS DS/EN ISO 4126-2-2003 | 2003-04-25 | English | Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices |
| 60 | DS DS/EN 13010-2003 | 2003-04-25 | English | Packaging - Unit packaging - Dimensions and requirements for pegboard display |
| 61 | DS DS/EN ISO 15984-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and countersunk head - A2/A2 |
| 62 | DS DS/EN 14047-2003 | 2003-04-25 | English | Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
| 63 | DS DS/EN ISO 15983-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and protruding head - A2/A2 |
| 64 | DS DS/EN ISO 16585-2003 | 2003-04-25 | English | Closed end blind rivets with pull mandrel and protruding head - A2/SSt |
| 65 | DS DS/EN ISO 16584-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt |
| 66 | DS DS/EN ISO 16582-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt |
| 67 | DS DS/EN ISO 15976-2003 | 2003-04-25 | English | Closed end blind rivets with break pull mandrel and protruding head - St/St |
| 68 | DS DS/EN 10031-2003 | 2003-04-25 | English | Semi-finished products for forging - Tolerances on dimensions, shape and mass |
| 69 | DS DS/EN ISO 15980-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and countersunk head - St/St |
| 70 | DS DS/EN 14082-2003 | 2003-04-25 | English | Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing |
| 71 | DS DS/EN 144-3-2003 | 2003-04-25 | English | Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for diving gases Nitrox and oxygen |
| 72 | DS DS/EN ISO 15975-2003 | 2003-04-25 | English | Closed end blind rivets with break pull mandrel and protruding head - AI/AIA |
| 73 | DS DS/EN ISO 15977-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and protruding head - AIA/St |
| 74 | DS DS/EN ISO 3887-2003 | 2003-04-25 | English | Steel - Determination of depth of decarburization |
| 75 | DS DS/EN ISO 15979-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and protruding head - St/St |
| 76 | DS DS/EN ISO 6888-3-2003 | 2003-04-25 | English | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 3: Detection and MPN technique for low numbers |
| 77 | DS DS/EN 13876-2003 | 2003-04-25 | English | Transport - Logistics and Services - Goods transport chains - Code of practice for the provision of cargo transport services |
| 78 | DS DS/ISO 18333-2003 | 2003-04-25 | English | Pallets for materials handling - Quality of new wooden components for flat pallets |
| 79 | DS DS/EN ISO 15978-2003 | 2003-04-25 | English | Open end blind rivets with break pull mandrel and countersunk head - AIA/St |
| 80 | DS DS/EN ISO 105-C09-2003 | 2003-04-11 | English | Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
| 81 | DS DS/EN 62053-11-2003 | 2003-04-11 | English | Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2) |
| 82 | DS DS/ISO 8607-2003 | 2003-04-11 | English | Artificial insemination of animals - Frozen semen of breeding bulls - Enumeration of living aerobic microorganisms |
| 83 | DS DS/EN 12952-16-2003 | 2003-04-11 | English | Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluidized-bed firing systems for solid fuels for the boiler |
| 84 | DS DS/EN 12441-6-2003 | 2003-04-11 | English | Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron - Flame atomic absorption spectrometric method |
| 85 | DS DS/EN 12441-5-2003 | 2003-04-11 | English | Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method |
| 86 | DS DS/EN 60335-2-38-2003 | 2003-04-11 | English | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
| 87 | DS DS/EN 62053-21-2003 | 2003-04-11 | English | Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) |
| 88 | DS DS/EN 12441-4-2003 | 2003-04-11 | English | Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method |
| 89 | DS DS/EN 13773-2003 | 2003-04-11 | English | Textiles and textile products - Burning behaviour - Curtains and drapes - Classification scheme |
| 90 | DS DS/EN 12952-9-2003 | 2003-04-11 | English | Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems for pulverized solid fuels for the boiler |
| 91 | DS DS/EN 62053-22-2003 | 2003-04-11 | English | Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 and 0,5) |
| 92 | DS DS/EN 60335-2-39-2003 | 2003-04-11 | English | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
| 93 | DS DS/ISO 5739-2003 | 2003-04-11 | English | Caseins and caseinates - Determination of contents of scorched particles and of extraneous matter |
| 94 | DS DS/EN 13452-2-2003 | 2003-04-11 | English | Railway applications - Braking - Mass transit brake systems - Part 2: Methods of test |
| 95 | DS DS/EN 916-2003 | 2003-04-11 | English | Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety |
| 96 | DS DS/EN 13895-2003 | 2003-04-11 | English | Textiles - Monofilaments - Determination of tensile properties |
| 97 | DS DS/EN ISO 14895-2003 | 2003-04-11 | English | Small craft - Liquid-fuelled galley stoves |
| 98 | DS DS/EN 14410-2003 | 2003-04-11 | English | Self adhesive tapes - Measurement of breaking strength and elongation at break |
| 99 | DS DS/EN 13452-1-2003 | 2003-04-11 | English | Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements |
| 100 | DS DS/ENV 737-6-2003 | 2003-04-11 | English | Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| 101 | DS DS/ISO 22628-2003 | 2003-04-11 | English | Road vehicles - Recyclability and recoverability - Calculation method |
| 102 | DS DS/EN 1330-10-2003 | 2003-04-11 | English, French, German | Non-destructive testing - Terminology - Part 10: Terms used in visual testing |
| 103 | DS DS/EN 658-4-2003 | 2003-04-11 | English | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens |
| 104 | DS DS/EN ISO 9073-6-2003 | 2003-04-11 | English | Textiles - Test methods for nonwovens - Part 6: Absorption |
| 105 | DS DS/ISO 7889-2003 | 2003-04-11 | English | Yogurt - Enumeration of characteristic microorganisms - Colony-count technique at 37 °C |
| 106 | DS DS/EN 1503-4-2003 | 2003-04-11 | English | Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
| 107 | DS DS/EN 60335-2-62-2003 | 2003-04-11 | English | Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks |
| 108 | DS DS/EN 62053-23-2003 | 2003-04-11 | English | Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) |
| 109 | DS DS/EN 1792-2003 | 2003-04-11 | English, French, German | Welding - Multilingual list of terms for welding and related processes |
| 110 | DS DS/EN 1071-1-2003 | 2003-04-11 | English | Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer |
| 111 | DS DS/EN ISO 18812-2003 | 2003-04-11 | English | Health informatics - Clinical analyser interfaces to laboratry information systems - Use profiles (ISO 18812:2003) |
| 112 | DS DS/EN ISO 17653-2003 | 2003-04-11 | English | Destructive tests on welds in metallic materials - Torsion test of resistance spot welds |
| 113 | DS DS/EN 13298-2003 | 2003-04-11 | English | Railway applications - Suspension components - Helical suspension springs, steel |
| 114 | DS DS/EN 1981-2003 | 2003-04-11 | English | Copper and copper alloys - Master alloys |
| 115 | DS DS/EN ISO 15084-2003 | 2003-04-11 | English | Small craft - Anchoring, mooring and towing - Strong points |
| 116 | DS DS/EN 60335-2-49-2003 | 2003-04-11 | English | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric hot cupboards |
| 117 | DS DS/EN 60335-2-50-2003 | 2003-04-11 | English | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
| 118 | DS DS/ISO 9232-2003 | 2003-04-11 | English | Yogurt - Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus) |
| 119 | DS DS/EN 60669-1/A1-2003 | 2003-04-11 | English | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
| 120 | DS DS/EN 13925-1-2003 | 2003-04-11 | English | Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles |
| 121 | DS DS/EN 13925-2-2003 | 2003-04-11 | English | Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures |
| 122 | DS DS/EN 14057-2003 | 2003-04-11 | English | Lead and lead alloys - Scraps - Terms and definitions |
| 123 | DS DS/EN 60335-2-47-2003 | 2003-04-07 | English | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| 124 | DS DS/EN 60112-2003 | 2003-04-07 | English | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| 125 | DS DS/EN 60335-2-42-2003 | 2003-04-07 | English | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
| 126 | DS DS/EN 61643-11-2003 | 2003-04-07 | English | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and tests |
| 127 | DS DS/EN 61243-2/A2-2003 | 2003-04-07 | English | Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c. |
| 128 | DS DS/EN 13878-2003 | 2003-04-07 | English, French, German | Leisure accomodation vehicles - Terms and definitions |
| 129 | DS DS/EN 61029-2-9-2003 | 2003-04-07 | English | Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws |
| 130 | DS DS/EN 61811-50-2003 | 2003-04-07 | English | Electromechanical all-or-nothing relays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality |
| 131 | DS DS/EN 60898-1-2003 | 2003-04-07 | English | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation |
| 132 | DS DS/EN 60676-2003 | 2003-04-07 | English | Industrial electroheating equipment - Test methods for direct arc furnaces |
| 133 | DS DS/EN 61811-51-2003 | 2003-04-07 | English | Electromechanical all-or-nothing relays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction |
| 134 | DS DS/EN 60335-2-48-2003 | 2003-04-07 | English | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial grillers and toasters |
| 135 | DS DS/EN 13278-2003 | 2003-04-07 | English | Open fronted gas-fired independent space heaters |
| 136 | DS DS/EN ISO 13625-2003 | 2003-04-04 | English | Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings |
| 137 | DS DS/EN 61360-1-2003 | 2003-04-04 | English | Standard data element types with associated classification scheme for electric components - Part 1: Definitions - Principles and methods |
| 138 | DS DS/INF 147-2003 | 2003-04-04 | Danish | New European standards for fire testing and classification |
| 139 | DS DS/EN 61811-54-2003 | 2003-04-04 | English | Electromechanical all-or-nothing relays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15 x 7,5 mm base |
| 140 | DS DS/EN 61811-52-2003 | 2003-04-04 | English | Electromechanical all-or-nothing relays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20 mm x 10 mm base |
| 141 | DS DS/EN 61811-53-2003 | 2003-04-04 | English | Electromechanical all-or-nothing relays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14 mm x 9 mm base |
| 142 | DS DS/EN 61811-55-2003 | 2003-04-04 | English | Electromechanical all-or-nothing relays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11 x 7,5 mm (max.) base |
| 143 | DS DS/EN 13657-2003 | 2003-04-04 | English | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| 144 | DS DS/EN 61360-2-2003 | 2003-04-04 | English | Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema |
| 145 | DS DS/EN 12255-13-2003 | 2003-03-31 | English | Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation |
| 146 | DS DS/EN 13330-2003 | 2003-03-31 | English | Shutters - Hard body impact - Test method |
| 147 | DS DS/EN 12380-2003 | 2003-03-31 | English | Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
| 148 | DS DS/EN 13450-2003 | 2003-03-31 | English | Aggregates for railway ballast |
| 149 | DS DS/EN 12541-2003 | 2003-03-31 | English | Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 |
| 150 | DS DS/EN ISO 10442-2003 | 2003-03-31 | English | Petroleum, chemical and gas service industries - Packaged, integrally geared centrifugal air compressors |
| 151 | DS DS/EN ISO 14692-3-2003 | 2003-03-31 | English | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design |
| 152 | DS DS/EN ISO 14692-2-2003 | 2003-03-31 | English | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture |
| 153 | DS DS/EN 12098-3-2003 | 2003-03-31 | English | Controls for heating systems - Part 3: Outside temperature compensated control equipment for electrical heating systems |
| 154 | DS DS/EN ISO 14692-4-2003 | 2003-03-31 | English | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation |
| 155 | DS DS/EN ISO 14692-1-2003 | 2003-03-28 | English | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 1: Vocabulary, symbols, applications and materials |
| 156 | DS DS/EN 1097-10-2003 | 2003-03-28 | English | Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height |
| 157 | DS DS/EN 13036-3-2003 | 2003-03-28 | English | Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability |
| 158 | DS DS/EN ISO 15148-2003 | 2003-03-28 | English | Hygrothermal performance of building materials and products - Determination of water absorption coefficient by partial immersion |
| 159 | DS DS/EN ISO 19900-2003 | 2003-03-28 | English | Petroleum and natural gas industries - General requirements for offshore structures |
| 160 | DS DS/EN ISO 15761-2003 | 2003-03-28 | English | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| 161 | DS DS/EN 13523-23-2003 | 2003-03-28 | English | Coil coated metals - Test methods - Part 23: Colour stability in humid atmospheres containing sulfur dioxide |
| 162 | DS DS/EN 50377-5-1-2003 | 2003-03-28 | English | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 5-1: Type EC terminated on IEC 60793-2 category B1.1 singlemode fibre |
| 163 | DS DS/EN 50065-2-2-2003 | 2003-03-27 | English | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in |
| 164 | DS DS/EN 60191-6-2/Corr.1-2003 | 2003-03-27 | English | Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages |
| 165 | DS DS/EN 61010-2-032-2003 | 2003-03-27 | English | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement |
| 166 | DS DS/ISO/TR 14062-2003 | 2003-03-27 | Danish, English | Environmental management - Integrating environmental aspects into product design and development |
| 167 | DS DS/EN 60746-3/Corr.1-2003 | 2003-03-27 | English | Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity |
| 168 | DS DS/EN 50065-2-1-2003 | 2003-03-27 | English | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in |
| 169 | DS DS/EN 60896-11-2003 | 2003-03-27 | English | Stationary lead-acid batteries - Part 11: Vented types - General requirements and methods of tests |
| 170 | DS DS/EN 61207-3/Corr.1-2003 | 2003-03-27 | English, French | Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers |
| 171 | DS DS/EN 60749-11/Corr.1-2003 | 2003-03-27 | English, French | Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature - Two-fluid-bath method |
| 172 | DS DS/EN 40-7-2003 | 2003-03-25 | English | Lighting columns - Part 7: Requirements for fibre reinforced polymer composite lighting columns |
| 173 | DS DS/EN 13900-2-2003 | 2003-03-25 | English | Pigments and extenders - Methods of dispersion and assessment of dispersibility characteristics in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling |
| 174 | DS DS/EN 13900-1-2003 | 2003-03-25 | English | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction |
| 175 | DS DS/EN 13900-3-2003 | 2003-03-25 | English | Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling |
| 176 | DS DS/EN 527-3-2003 | 2003-03-24 | English | Office furniture - Work tables and desks - Part 3: Methods of test for the determination of the stability and the mechanical strength of the structure |
| 177 | DS DS/EN 13610-2003 | 2003-03-24 | English | Chemical disinfectants - Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1) |
| 178 | DS DS/EN 12680-1-2003 | 2003-03-24 | English | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
| 179 | DS DS/EN 13612/AC-2003 | 2003-03-24 | English | Performance evaluation of in vitro diagnostic medical devices |
| 180 | DS DS/EN 13899-2003 | 2003-03-24 | English | Roller sports equipment - Roller skates - Safety requirements and test methods |
| 181 | DS DS/EN ISO 3727-3-2003 | 2003-03-24 | English | Butter - Determination of moisture, non-fat solids and fat contents - Part 3: Calculation of fat content |
| 182 | DS DS/EN 12499-2003 | 2003-03-24 | English | Internal cathodic protection of metallic structures |
| 183 | DS DS/EN 4420-2003 | 2003-03-24 | English | Aerospace series - Clips, spring tension, in alloy steel FE-PA3903 |
| 184 | DS DS/EN 13821-2003 | 2003-03-24 | English | Potentially explosive atmospheres - Explosion prevention and protection - Determination of minimum ignition energy of dust/air mixtures |
| 185 | DS DS/EN 3851-2003 | 2003-03-24 | English | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Swivel nuts, straight |
| 186 | DS DS/EN 12266-2-2003 | 2003-03-24 | English | Industrial valves - Testing of valves - Part 2: Tests, test procedures and acceptance critera - Supplementary requirements |
| 187 | DS DS/EN 12681-2003 | 2003-03-24 | English | Founding - Radiographic inspection |
| 188 | DS DS/EN 12680-2-2003 | 2003-03-24 | English | Founding - Ultrasonic examination - Part 2 : Steel castings for highly stressed components |
| 189 | DS DS/EN ISO 294-4-2003 | 2003-03-24 | English | Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage |
| 190 | DS DS/EN ISO 13927-2003 | 2003-03-24 | English | Plastics - Simple heat release test using a conical radiant heater and a thermopile detector |
| 191 | DS DS/EN 169-2003 | 2003-03-24 | English | Personal eye-protection - Filters for welding and related techniques - Transmittance requirements and recommended use |
| 192 | DS DS/EN 13780-2003 | 2003-03-24 | English | Touch and close fasteners - Determination of longitudinal shear strength |
| 193 | DS DS/EN 4555-2003 | 2003-03-24 | English | Aerospace series - Pipe coupling, 37°, in heat resisting steel - Ferrules, welded - Inch series |
| 194 | DS DS/EN 682-2003 | 2003-03-24 | English | Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| 195 | DS DS/EN 12196-2003 | 2003-03-24 | English | Gymnastic equipment - Horses and bucks - Functional and safety requirements, test methods |
| 196 | DS DS/EN 4556-2003 | 2003-03-24 | English | Aerospace series - Pipe coupling, 37°, in heat resisting steel - Cap assemblies - Inch series |
| 197 | DS DS/EN ISO 9094-1-2003 | 2003-03-24 | English | Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m |
| 198 | DS DS/EN ISO 2039-1-2003 | 2003-03-24 | English | Plastics - Determination of hardness - Part 1: Ball indentation method |
| 199 | DS DS/EN 13110-2003 | 2003-03-24 | English | Transportable refillable welded aluminium cylinders for liquefied petroleum gas - Design and construction |
| 200 | DS DS/EN 681-4/A1-2003 | 2003-03-24 | Danish, English | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements |
| 201 | DS DS/EN 681-1/A2-2003 | 2003-03-24 | Danish, English | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber |
| 202 | DS DS/EN 681-3/A1-2003 | 2003-03-24 | Danish, English | Elastomeric seals - Material requirements for pipe joints seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber |
| 203 | DS DS/EN 1888-2003 | 2003-03-24 | English | Child care articles - Wheeled child conveyances - Safety requirements and test methods |
| 204 | DS DS/EN 681-2/A1-2003 | 2003-03-24 | Danish, English | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers |
| 205 | DS DS/EN ISO 11403-1-2003 | 2003-03-24 | English | Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties |
| 206 | DS DS/EN ISO 15083-2003 | 2003-03-24 | English | Small craft - Bilge-pumping systems |
| 207 | DS DS/EN ISO 4833-2003 | 2003-03-24 | English | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of microorganisms - Colony-count technique at 30°C |
| 208 | DS DS/EN 13927-2003 | 2003-03-24 | English | Non-destructive testing - Visual testing - Equipment |
| 209 | DS DS/EN 586-3-2003 | 2003-03-24 | Danish, English | Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form |
| 210 | DS DS/EN 4553-2003 | 2003-03-24 | English | Aerospace series - Pipe coupling, 37°, spherical, in heat resisting steel - Elbow 90° nippels, welded end - Inch series |
| 211 | DS DS/EN 60044-1/A2-2003 | 2003-03-21 | English | Instrument transformers - Part 1: Current transformers |
| 212 | DS DS/EN 60335-2-88-2003 | 2003-03-21 | English | Household and similar electrical appliances - Safety - Part 2-88: Particular requirements for humidifiers intended for use with heating, ventilation or air-conditioning systems |
| 213 | DS DS/EN 60749-18-2003 | 2003-03-21 | English | Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose) |
| 214 | DS DS/EN 61056-1-2003 | 2003-03-21 | English | General purpose lead-acid batteries (valve regulated types) - Part 1: General requirements, functional characteristics - Methods of test |
| 215 | DS DS/EN 50083-8-2003 | 2003-03-21 | English | Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks |
| 216 | DS DS/EN 50083-9-2003 | 2003-03-21 | English | Cable networks for television signals, sound signals and interactive services - Part 9: Interfaces for CATV/SMATV headends and similar professional equipment for DVB/MPEG-2 transport streams |
| 217 | DS DS/EN 61331-1-2003 | 2003-03-21 | English | Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials |
| 218 | DS DS/EN 61331-2-2003 | 2003-03-21 | English | Protective devices against diagnostic medical X-radiation - Part 2: Protective glass plates |
| 219 | DS DS/EN 60601-2-44/A1-2003 | 2003-03-21 | English | Medical electrical equipment - Part 2-44: Particular requirements for the safety of X-ray equipment for computed tomography |
| 220 | DS DS/EN 60335-2-37-2003 | 2003-03-21 | English | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers |
| 221 | DS DS/EN 50065-2-3-2003 | 2003-03-21 | English | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by ele |
| 222 | DS DS/ISO/IEC Guide 68-2003 | 2003-03-21 | English | Arrangements for the recognition and acceptance of conformity assessment results |
| 223 | DS DS/EN 60695-5-1-2003 | 2003-03-21 | English | Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
| 224 | DS DS/EN 62019/A1-2003 | 2003-03-21 | English | Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units |
| 225 | DS DS/EN 60622-2003 | 2003-03-21 | English | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells |
| 226 | DS DS/EN 61800-4-2003 | 2003-03-21 | English | Adjustable speed electrical power drive systems - Part 4: General requirements - Rating specifications for a.c. power drive systems above 1000 V a.c. and not exceeding 35 kV |
| 227 | DS DS/EN 50362-2003 | 2003-03-21 | English | Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits |
| 228 | DS DS/EN 61010-2-101-2003 | 2003-03-21 | English | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment |
| 229 | DS DS/EN 60335-2-36-2003 | 2003-03-21 | English | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
| 230 | DS DS/EN 60746-2-2003 | 2003-03-21 | English | Expression of performance of electrochemical analyzers - Part 2: pH value |
| 231 | DS DS/EN 60746-1-2003 | 2003-03-21 | English | Expression of performance of electrochemical analyzers - Part 1: General |
| 232 | DS DS/EN 4585-2003 | 2003-03-18 | English | Aerospace series - Clips, spring tension - Technical specification |
| 233 | DS DS/EN 4560-2003 | 2003-03-18 | English | Aerospace series - Pipe coupling 37 °, spherical, up to 21000 kPa - Inch series - Technical specification |
| 234 | DS DS/EN 4554-2003 | 2003-03-18 | English | Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight unions, threaded - Inch series |
| 235 | DS DS/EN 4552-2003 | 2003-03-18 | English | Aerospace series - Pipe coupling, 37°, spherical, in heat resisting steel - Straight nippels, welded end - Inch series |
| 236 | DS DS/EN 4551-2003 | 2003-03-18 | English | Aerospace series - Pipe coupling 37°, in heat resisting steel - Swivel nuts - Inch series |
| 237 | DS DS/EN 4561-2003 | 2003-03-15 | English | Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90° - Inch series |
| 238 | DS DS/EN 4563-2003 | 2003-03-15 | English | Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series |
| 239 | DS DS/EN 4557-2003 | 2003-03-15 | English | Aerospace series - Pipe coupling, 37°, spherical, in heat resisting steel - Tees nipples, welded - Inch series |
| 240 | DS DS/EN 13488-2003 | 2003-03-14 | English | Wood flooring - Mosaic parquet elements |
| 241 | DS DS/EN 13560/AC-2003 | 2003-03-14 | English | Surface active agents - Determination of amide nitrogen content - Potentiometric titration |
| 242 | DS DS/EN 13442-2003 | 2003-03-14 | English | Wood and parquet flooring and wood panelling and cladding - Determination of the resistance to chemical agents |
| 243 | DS DS/EN 13629-2003 | 2003-03-14 | English | Wood flooring - Solid pre-assembled hardwood board |
| 244 | DS DS/ISO 5660-1-2003 | 2003-03-14 | English | Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method) |
| 245 | DS DS/EN 13955-2003 | 2003-03-14 | English | Surface active agents - Determination of Krafft point and solubility of ionic surface active agents |
| 246 | DS DS/EN 13227-2003 | 2003-03-14 | English | Wood flooring - Solid lamparquet products |
| 247 | DS DS/EN 13810-1-2003 | 2003-03-14 | English | Wood-based panels - Floating floors - Part 1: Performance specifications and requirements |
| 248 | DS DS/EN 54-4/A1-2003 | 2003-03-14 | English | Fire detection and fire alarm systems - Part 4: Power supply equipment |
| 249 | DS DS/ISO 13784-1-2003 | 2003-03-14 | English | Reaction-to-fire tests for sandwich panel building systems - Part 1: Test method for small rooms |
| 250 | DS DS/ISO 15706-2003 | 2003-03-11 | English | Information and documentation - International Standard Audiovisual Number (ISAN) |
| 251 | DS DS/ISO/IEC 7811-1-2003 | 2003-03-11 | English | Identification cards - Recording technique - Part 1: Embossing |
| 252 | DS DS/IEC/TR 61282-7-2003 | 2003-03-03 | English | Fibre optic communication system design guides - Part 7: Statistical calculation of chromatic dispersion |
| 253 | DS DS/IEC/TR 61282-6-2003 | 2003-03-03 | English | Fibre optic communication system design guides - Part 6: Skew design in parallel optical interconnection systems |
| 254 | DS DS/EN 61076-4-113-2003 | 2003-03-03 | English | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| 255 | DS DS/EN 13717-2003 | 2003-03-03 | English | Surface active agents - Determination of primary, secondary and tertiary amino nitrogen - Potentiometric titration |
| 256 | DS DS/EN 60794-2-20-2003 | 2003-03-03 | English | Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical distribution cables |
| 257 | DS DS/IEC 60874-19-1-2003 | 2003-03-03 | English | Connectors for optical fibres and cables - Part 19-1: Fiber optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b - Detail specification |
| 258 | DS DS/EN ISO 15587-1-2003 | 2003-03-03 | English | Water quality - Digestion for the determination of selected elements in water - Part 1: Aqua regia digestion |
| 259 | DS DS/EN 60044-2/A2-2003 | 2003-03-03 | English | Instrument transformers - Part 2: Inductive voltage transformers |
| 260 | DS DS/EN 50216-2/A1-2003 | 2003-03-03 | English | Power transformer and reactor fittings - Part 2: Gas and oil actuated relay for liquid immersed transformers and reactors with conservator |
| 261 | DS DS/EN 61056-2-2003 | 2003-03-03 | English | General purpose lead-acid batteries (valve-regulated types) - Part 2: Dimensions, terminals and marking |
| 262 | DS DS/EN 13405-2003 | 2003-03-03 | English | Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatographic (HPLC) |
| 263 | DS DS/EN 779-2003 | 2003-02-28 | English | Particulate air filters for general ventilation - Determination of the filtration performance |
| 264 | DS DS/EN 12603-2003 | 2003-02-28 | English | Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |
| 265 | DS DS/EN 12600-2003 | 2003-02-28 | English | Glass in building - Pendulum test - Impact test method for flat glass |
| 266 | DS DS/EN 50098-1/A1/Corr.-2003 | 2003-02-26 | English | Customer premises cabling for Information Technology - Part 1: ISDN basic access |
| 267 | DS DS/EN 13757-1-2003 | 2003-02-26 | English | Communication systems for meters and remote reading of meters - Part 1: Data exchange |
| 268 | DS DS/EN 14031-2003 | 2003-02-26 | English | Workplace atmospheres - Determination of airborne endotoxins |
| 269 | DS DS/EN ISO 13691-2003 | 2003-02-26 | English | Petroleum and natural gas industries - High-speed special-purpose gear units |
| 270 | DS DS/ISO 13358-2003 | 2003-02-26 | English | Water quality - Determination of easily released sulfide |
| 271 | DS DS/EN 12492/A1-2003 | 2003-02-25 | English | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
| 272 | DS DS/EN ISO 13998-2003 | 2003-02-25 | English | Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003) |
| 273 | DS DS/EN 13794-2003 | 2003-02-25 | English | Respiratory protective devices - Self-cointained closed-circuit breathing apparatus for escape - Requirements, testing, marking |
| 274 | DS DS/EN ISO 17236-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of extension set |
| 275 | DS DS/EN 12332-2-2003 | 2003-02-25 | English | Rubber- or plastic-coated fabrics - Determination of bursting strength - Part 2: Hydraulic method |
| 276 | DS DS/EN ISO 17227-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of dry heat resistance of leather |
| 277 | DS DS/CEN/CR 12952-17-2003 | 2003-02-25 | English | Water boilers and auxiliary installations - Part 17: Guideline for the involvement of an inspection body independent of the manufacturer |
| 278 | DS DS/EN 14118-1-2003 | 2003-02-25 | English | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 1: Designation |
| 279 | DS DS/EN 14118-2-2003 | 2003-02-25 | English | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
| 280 | DS DS/EN ISO 10439-2003 | 2003-02-25 | English | Petroleum, chemical and gas service industries - Centrifugal compressors |
| 281 | DS DS/EN 14118-3-2003 | 2003-02-25 | English | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 3: Specific requirements |
| 282 | DS DS/EN ISO 2589-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of thickness |
| 283 | DS DS/EN ISO 17233-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings |
| 284 | DS DS/EN 13360-2003 | 2003-02-25 | English | Rubber- or plastics-coated fabrics - Terminology |
| 285 | DS DS/EN ISO 1806-2003 | 2003-02-25 | English | Fishing nets - Determination of mesh breaking force of netting |
| 286 | DS DS/EN 13597-2003 | 2003-02-25 | English | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| 287 | DS DS/EN ISO 17229-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of water vapour absorption |
| 288 | DS DS/EN 1171-2003 | 2003-02-25 | English | Industrial valves - Cast iron gate valves |
| 289 | DS DS/EN 13458-2-2003 | 2003-02-25 | English | Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing |
| 290 | DS DS/CEN/CR 12953-14-2003 | 2003-02-25 | English | Shell boilers - Part 14: Guideline for involvement of an inspection body independent of the manufacturer |
| 291 | DS DS/EN ISO 2420-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of apparent density |
| 292 | DS DS/EN 13347-2003 | 2003-02-25 | English | Copper and copper alloys - Rod and wire for welding and braze welding |
| 293 | DS DS/EN ISO 3380-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 degrees C |
| 294 | DS DS/CEN/TR 13480-7-2003 | 2003-02-25 | English | Metallic industrial piping - Part 7: Guidance on the use of conformity assessment procedures |
| 295 | DS DS/EN 13496-2003 | 2003-02-25 | English | Thermal insulation products for building applications - Determination of the mechanical properties of glass fibre meshes |
| 296 | DS DS/EN 13274-8-2003 | 2003-02-25 | English | Respiratory protective devices - Methods of test - Part 8: Determination of dolomite dust clogging |
| 297 | DS DS/EN ISO 2417-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of the static absorption of water |
| 298 | DS DS/EN ISO 2418-2003 | 2003-02-25 | English | Leather - Chemical, physical and mechanical and fastness tests - Sampling location |
| 299 | DS DS/EN 10220-2003 | 2003-02-25 | English | Seamless and welded steel tubes - Dimensions and masses per unit length |
| 300 | DS DS/EN ISO 3377-2-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of tear load - Part 2: Double edge tear |
| 301 | DS DS/EN ISO 3378-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of resistance to grain cracking and grain crack index |
| 302 | DS DS/EN 13497-2003 | 2003-02-25 | English | Thermal insulation products for building applications - Determination of the resistance to impact of external thermal insulation composite systems (ETICS) |
| 303 | DS DS/EN 13495-2003 | 2003-02-25 | English | Thermal insulation products for building applications - Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test) |
| 304 | DS DS/EN 13494-2003 | 2003-02-25 | English | Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material |
| 305 | DS DS/EN 13498-2003 | 2003-02-25 | English | Thermal insulation products for building applications - Determination of the resistance to penetration of external thermal insulation composite systems (ETICS) |
| 306 | DS DS/CEN/CR 14473-2003 | 2003-02-25 | English | Transportable gas cylinders - Porous masses for acetylene cylinders |
| 307 | DS DS/EN ISO 14268-2003 | 2003-02-25 | English | Leather - Physical and mechanical tests - Determination of water vapour permeability |
| 308 | DS DS/EN 4550-2-2003 | 2003-02-25 | English | Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 2: Port ends |
| 309 | DS DS/ISO 11814-2003 | 2003-02-25 | English | Dried milk - Assessment of heat treatment intensity - Method using high-performance liquid chromatography |
| 310 | DS DS/EN 4550-1-2003 | 2003-02-25 | English | Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical |
| 311 | DS DS/EN 13248-2003 | 2003-02-25 | English | Cookware - Coffee makers for domestic use with an independant heat source - Definitions, requirements and test methods |
| 312 | DS DS/EN 4550-3-2003 | 2003-02-25 | English | Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 3: Port connections |
| 313 | DS DS/EN 13677-3-2003 | 2003-02-25 | English | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 3: Specific requirements |
| 314 | DS DS/EN 12516-3-2003 | 2003-02-25 | English | Valves - Shell design strength - Part 3: Experimental method |
| 315 | DS DS/EN 13615/AC-2003 | 2003-02-25 | English | Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90% and 99,85% by atomic spectrometry |
| 316 | DS DS/EN ISO 14675-2003 | 2003-02-25 | English | Milk and milk products - Guidelines for a standardized description of competitive enzyme immunoassays - Determination of aflatoxin M1 content |
| 317 | DS DS/EN 13844-2003 | 2003-02-25 | English | Textiles - Monofilaments - Determination of thermal shrinkage |
| 318 | DS DS/EN 13677-1-2003 | 2003-02-25 | English | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 1: Designation |
| 319 | DS DS/EN 13677-2-2003 | 2003-02-25 | English | Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements |
| 320 | DS DS/EN 14065-2003 | 2003-02-25 | English | Textiles - Laundry processed textiles - Biocontamination control system |
| 321 | DS DS/EN 4550-4-2003 | 2003-02-25 | English | Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends |
| 322 | DS DS/EN 4549-2003 | 2003-02-25 | English | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series |
| 323 | DS DS/ISO 9239-2-2003 | 2003-02-21 | English | Reaction to fire tests for floorings - Part 2: Determination of flame spread at a heat flux level of 25 kw/m2 |
| 324 | DS DS/EN 13756-2003 | 2003-02-21 | English, French, German | Wood floor - Terminology |
| 325 | DS DS/ISO/IEC 8348-2003 | 2003-02-21 | English | Information technology - Open Systems Interconnection - Network dervice definition |
| 326 | DS DS/ISO/IEC 9596-1/Corr.2-2003 | 2003-02-21 | English | Information technology - Open Systems Interconnection - Common management information protocol - Part 1: Specification |
| 327 | DS DS/ISO/IEC 10164-15-2003 | 2003-02-21 | English | Information technology - Open Systems Interconnection - Systems management: Scheduling function |
| 328 | DS DS/ISO/IEC 10164-2/Amd.1/Corr.-2003 | 2003-02-21 | English | Information technology - Open Systems Interconnection - Systems Management - Part 2: State Management Function - Amendment 1: Implementation conformance statement proformas |
| 329 | DS DS/ISO 13784-2-2003 | 2003-02-21 | English | Reaction-to-fire tests for sandwich panel building systems - Part 2: Test method for large rooms |
| 330 | DS DS/EN ISO 8254-2-2003 | 2003-02-21 | English | Paper and board - Measurement of specular gloss - Part 2: 75 gloss with a parallel beam, DIN method |
| 331 | DS DS/ISO/IEC 1989-2003 | 2003-02-21 | English | Information technology - Programming languages - COBOL |
| 332 | DS DS/ISO 13785-2-2003 | 2003-02-21 | English | Reaction-to-fire tests for facades - Part 2: Large-scale tests |
| 333 | DS DS/ISO 13785-1-2003 | 2003-02-21 | English | Reaction-to-fire tests for facades - Part 1: Intermediate-scale tests |
| 334 | DS DS/EN 13489-2003 | 2003-02-21 | English | Wood flooring - Multi-layer parquet elements |
| 335 | DS DS/EN 13892-1-2003 | 2003-02-21 | English | Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test |
| 336 | DS DS/EN 14086-2003 | 2003-02-21 | English | Paper and board - Measurement of specular gloss - 45º gloss with a parallel beam, DIN method |
| 337 | DS DS/EN 13564-2-2003 | 2003-02-21 | English | Anti-flooding devices for buildings - Part 2: Test methods |
| 338 | DS DS/EN 13892-8-2003 | 2003-02-19 | English | Methods of test for screed materials - Part 8: Determination of bond strength |
| 339 | DS DS/EN 13892-4-2003 | 2003-02-19 | English | Methods of test for screed materials - Part 4: Determination of wear resistance BCA |
| 340 | DS DS/EN 13892-2-2003 | 2003-02-19 | English | Methods of test for screed materials - Part 2: Determination of flexural and compressive strength |
| 341 | DS DS/EN 13893-2003 | 2003-02-19 | English | Resilient, laminate and textile floor coverings - Parameters for the measurement of dynamic coefficient of friction on dry floor surfaces |
| 342 | DS DS/EN 13892-6-2003 | 2003-02-19 | English | Methods of test for screed materials - Part 6: Determination of surface hardness |
| 343 | DS DS/CEN/CR 14378/AC-2003 | 2003-02-14 | English | Ventilation for buildings - Experimental determination of mechnical energy loss coefficients of air handling components |
| 344 | DS DS/EN 1279-6-2003 | 2003-02-14 | English | Glass in building - Insulating glass units - Part 6: Factory production control and periodic tests |
| 345 | DS DS/EN 1279-2-2003 | 2003-02-14 | English | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
| 346 | DS DS/EN 1279-3-2003 | 2003-02-14 | English | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
| 347 | DS DS/EN 1279-4-2003 | 2003-02-14 | English | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
| 348 | DS DS/EN 1097-6/AC-2003 | 2003-02-11 | English | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| 349 | DS DS/EN 55024/A2-2003 | 2003-02-10 | English | Information technology equipment - Immunity characteristics - Limits and methods of measurement |
| 350 | DS DS/ISO/IEC 18010-2003 | 2003-02-10 | English | Information technology - Pathways and spaces for customer premises cabling |
| 351 | DS DS/ISO/IEC 10192-1-2003 | 2003-02-10 | English | Information technology - Home electronic systems (HES) interfaces - Part 1: Universal Interface (UI) Class 1 |
| 352 | DS DS/EN 60357 + CD-2003 | 2003-02-10 | English, French | Tungsten halogen lamps (non-vehicle) - Performance specifications |
| 353 | DS DS/EN 1757-3-2003 | 2003-02-10 | English | Safety of industrial trucks - Pedestrian controlled manual and semi-manual trucks - Part 3: Platform trucks |
| 354 | DS DS/IEC/TR 61464+Corr.1-2003 | 2003-02-10 | English | Insulated bushings - Guide for the interpretation of dissolved gas analysis (DGA) in bushings where oil is the impregnating medium of the main insulation (generally paper) |
| 355 | DS DS/EN 13316-2003 | 2003-02-10 | English | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
| 356 | DS DS/EN 60335-2-45-2003 | 2003-02-10 | English | Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances |
| 357 | DS DS/EN 13308-2003 | 2003-02-10 | English | Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve |
| 358 | DS DS/EN 62094-1-2003 | 2003-02-10 | English | Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements |
| 359 | DS DS/EN ISO 15587-2-2003 | 2003-02-10 | English | Water quality - Digestion for the determination of selected elements in water - Part 2: Nitric acid digestion (ISO 15587-2:2002) |
| 360 | DS DS/EN 50370-2-2003 | 2003-02-10 | English | Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity |
| 361 | DS DS/EN 60598-2-22/A1-2003 | 2003-02-10 | English | Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting |
| 362 | DS DS/EN 187103-2003 | 2003-02-10 | English | Family Specification - Optical fibre cables for indoor applications |
| 363 | DS DS/ISO/IEC TR 14543-4-2003 | 2003-02-10 | English | Information technology - Home electronic systems (HES) architecture - Part 4: Home and building automation in a mixed-use building |
| 364 | DS DS/EN ISO 16091-2003 | 2003-02-10 | English | Space systems - Integrated logistic support |
| 365 | DS DS/IEC/TR 61000-2-8-2003 | 2003-02-10 | English | Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
| 366 | DS DS/IEC/TR 61000-4-32-2003 | 2003-02-10 | English | Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques - High-altitude electromagnetic pulse (HEMP) simulator compendium |
| 367 | DS DS/EN 60794-2-2003 | 2003-02-10 | English | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| 368 | DS DS/EN 60064/A2-2003 | 2003-02-10 | English, French | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
| 369 | DS DS 2138-2003 | 2003-02-05 | Danish | Pressure piping systems of unplasticized polyvinyl chloride for irrigation |
| 370 | DS DS/EN 28233-2003 | 2003-02-05 | English | Thermoplastics valves - Torque - Test method |
| 371 | DS DS/EN 12729-2003 | 2003-02-05 | English | Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A |
| 372 | DS DS/EN 248-2003 | 2003-02-04 | English | Sanitary tapware - General specification for electrodeposited coatings of Ni-Cr |
| 373 | DS DS/EN 1433-2003 | 2003-02-04 | English | Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
| 374 | DS DS/EN 13101-2003 | 2003-02-04 | English | Steps for underground man entry chambers - Requirements, marking, testing and evaluation of confirmity |
| 375 | DS DS/EN 13564-1-2003 | 2003-02-04 | English | Anti-flooding devices for buildings - Part 1: Requirements |
| 376 | DS DS/EN 12400-2003 | 2003-02-04 | English | Windows and pedestrian doors - Mechanical durability - Requirements and classification |
| 377 | DS DS/EN 12170-2003 | 2003-02-04 | English | Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator |
| 378 | DS DS/EN 12599/AC-2003 | 2003-02-04 | English | Ventilation for buildings - Test procedures and measuring methods for handing over installed ventilation and air conditioning systems |
| 379 | DS DS/EN 1266-2003 | 2003-01-29 | English | Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases |
| 380 | DS DS/CLC/R0BT 005-2003 | 2003-01-29 | English | Information concerning plugs for household appliances covered by CLC/TC 61 used in the various CENELEC countries |
| 381 | DS DS/EN 61821-2003 | 2003-01-29 | English | Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits |
| 382 | DS DS/EN 61947-1-2003 | 2003-01-29 | English | Electronic projection - Measurement and documentation of key performance criteria - Part 1: Fixed resolution projectors |
| 383 | DS DS/EN 60061-2/A27-2003 | 2003-01-29 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders |
| 384 | DS DS/HD 384.4.43 S2-2003 | 2003-01-29 | English | Electrical installations of buildings - Part 4: Protection for safety - Chapter 43: Protection against overcurrent |
| 385 | DS DS/EN 61188-5-1-2003 | 2003-01-29 | English | Printed boards and printed board assemblies - Design and use - Part 5-1: Attachment (land/joint) considerations - Generic requirements |
| 386 | DS DS/EN ISO 11541-2003 | 2003-01-29 | English | Natural gas - Determination of water content at high pressure |
| 387 | DS DS/EN 13314-2003 | 2003-01-29 | English | Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover |
| 388 | DS DS/EN 60061-3/A29-2003 | 2003-01-29 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges |
| 389 | DS DS/EN 50346-2003 | 2003-01-29 | English | Information technology - Cabling installation - Testing of installed cabling |
| 390 | DS DS/EN 60061-1/A30-2003 | 2003-01-29 | English, French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
| 391 | DS DS/EN ISO 6245-2003 | 2003-01-29 | English | Petroleum products - Determination of ash |
| 392 | DS DS/EN 1118/A1-2003 | 2003-01-29 | English | Heat exchangers - Refrigerant cooled liquid coolers - Test procedure for establishing the performance |
| 393 | DS DS/EN 61988-2-1-2003 | 2003-01-29 | English | Plasma display panels - Part 2-1: Measuring methods - Optical |
| 394 | DS DS/EN ISO 15005-2003 | 2003-01-29 | English | Road vehicles - Ergonomic aspects of transport information and control systems - Dialogue management principles and compliance procedures |
| 395 | DS DS/EN 61676-2003 | 2003-01-29 | English | Medical electrical equipment - Dosimetric instuments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology |
| 396 | DS DS/EN 61967-6-2003 | 2003-01-29 | English | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz - 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method |
| 397 | DS DS/EN ISO 8222-2003 | 2003-01-29 | English | Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks |
| 398 | DS DS/IEC/TR 60870-6-505-2003 | 2003-01-29 | English | Telecontrol equipment and systems - Part 6-505: Telecontrol protocols compatible with ISO standards and ITU-T recommendations - TASE.2 User Guide |
| 399 | DS DS/EN 13630-2-2003 | 2003-01-28 | English | Eksplosives for civil uses - Detonating cords and safety fuses - Part 2: Determination of thermal stability of detonating cords and safety fuses |
| 400 | DS DS/EN 3854-2003 | 2003-01-27 | English | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Ferrules, welded |
| 401 | DS DS/EN 3852-2003 | 2003-01-27 | English | Aerospace series - Pipe couplings, 60 °, spherical, in titanium alloy TI-P64001 - Straight unions, welded, threaded |
| 402 | DS DS/ISO 10161-1/Amd.2-2003 | 2003-01-23 | English | Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Protocol Specification - Part 1: Protocol specification - Amendment 2: Addition of annex I acknowledging the National Library of Canada as the Maintenance Agency |
| 403 | DS DS/EN 764-5-2003 | 2003-01-23 | English | Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials |
| 404 | DS DS/EN 14020-2-2003 | 2003-01-23 | English | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| 405 | DS DS/CEN/TS 14234-2003 | 2003-01-23 | English | Materials and articles in contact with foodstuffs - Polymeric coatings on paper and board - Guide to the selection of conditions and test methods for overall migration |
| 406 | DS DS/CEN/TS 14235-2003 | 2003-01-23 | English | Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration |
| 407 | DS DS/EN ISO 2639-2003 | 2003-01-23 | English | Steels - Determination and verification of the depth of carburized and hardened cases |
| 408 | DS DS/EN 13819-1-2003 | 2003-01-23 | English | Hearing protectors - Testing - Part 1: Physical test methods |
| 409 | DS DS/EN 14020-3-2003 | 2003-01-23 | English | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| 410 | DS DS/EN 415-4/AC-2003 | 2003-01-23 | English | Safety of packaging machines - Part 4: Palletisers and depalletisers |
| 411 | DS DS/ISO 15664-2003 | 2003-01-23 | English | Acoustics - Noise control design procedures for open plant |
| 412 | DS DS/ISO 17339-2003 | 2003-01-23 | English | Ships and marine technology - Sea anchors for survival craft and rescue boats |
| 413 | DS DS/EN ISO 14577-3-2003 | 2003-01-23 | English | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks |
| 414 | DS DS/EN 658-2-2003 | 2003-01-23 | English | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties |
| 415 | DS DS/EN 13799-2003 | 2003-01-23 | English | Contents gauges for LPG tanks |
| 416 | DS DS/EN ISO 14577-1-2003 | 2003-01-23 | English | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method |
| 417 | DS DS/ISO 10381-1-2003 | 2003-01-23 | English | Soil quality - Sampling - Part 1: Guidance on the design of sampling programmes |
| 418 | DS DS/EN 12942/A1-2003 | 2003-01-23 | English | Respiratory protective devices - Power assisted filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking |
| 419 | DS DS/EN ISO 14577-2-2003 | 2003-01-23 | English | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines |
| 420 | DS DS/ISO 10381-2-2003 | 2003-01-23 | English | Soil quality - Sampling - Part 2: Guidance on sampling techniques |
| 421 | DS DS/EN 13605-2003 | 2003-01-23 | English | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| 422 | DS DS/ISO 13472-1-2003 | 2003-01-23 | English | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method |
| 423 | DS DS/EN 13604-2003 | 2003-01-23 | English | Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications |
| 424 | DS DS/ISO/IEC 13235-3-2003 | 2003-01-23 | English | Information technology - Open Distributed Processing - Trading Function - Part 3: Provision of Trading Function using OSI Directory service |
| 425 | DS DS/EN 658-5-2003 | 2003-01-23 | English | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) |
| 426 | DS DS/EN ISO 11904-1-2003 | 2003-01-23 | English | Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 1: Technique using a microphone in a real ear (MIRE technique) |
| 427 | DS DS/EN 12789-2003 | 2003-01-23 | English | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
| 428 | DS DS/EN ISO 14915-1-2003 | 2003-01-23 | English | Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework |
| 429 | DS DS/ISO 13559-2003 | 2003-01-23 | English | Butter, fermented milks and fresh cheese - Enumeration of contaminating microorganisms - Colony-count technique at 30 °C |
| 430 | DS DS/EN 764-4-2003 | 2003-01-23 | English | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| 431 | DS DS/EN 13283-2003 | 2003-01-23 | English | Zinc and zinc alloys - Secondary zinc |
| 432 | DS DS/ISO 10160/Amd.1-2003 | 2003-01-23 | English | Information and documentation - Open Systems Interconnection - Interlibrary Loan Application Service Definition - Amendment 1: Addition of annex D acknowledging the National Library of Canada as the Maintenance Agency |
| 433 | DS DS/EN 13819-2-2003 | 2003-01-23 | English | Hearing protectors - Testing - Part 2: Acoustic test methods |
| 434 | DS DS/EN 820-1-2003 | 2003-01-23 | English | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 1: Determination of flexural strength at elevated temperatures |
| 435 | DS DS/EN 10314-2003 | 2003-01-23 | English | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| 436 | DS DS/EN 170-2003 | 2003-01-23 | English | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
| 437 | DS DS/EN 352-3-2003 | 2003-01-23 | English | Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial safety helmet |
| 438 | DS DS/EN 13648-3-2003 | 2003-01-23 | English | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
| 439 | DS DS/EN 352-5-2003 | 2003-01-23 | English | Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs |
| 440 | DS DS/EN 352-6-2003 | 2003-01-23 | English | Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input |
| 441 | DS DS/EN 13080-2003 | 2003-01-23 | English | Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods |
| 442 | DS DS/EN 352-7-2003 | 2003-01-23 | English | Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs |
| 443 | DS DS/EN 13655-2003 | 2003-01-23 | English | Plastics - Mulching thermoplastic films for use in agriculture and horticulture |
| 444 | DS DS/EN 352-2-2003 | 2003-01-23 | English | Hearing protectors - General requirements - Part 2: Ear-plugs |
| 445 | DS DS/EN 352-1-2003 | 2003-01-23 | English | Hearing protectors - General requirements - Part 1: Ear-Muffs |
| 446 | DS DS/EN ISO 9934-2-2003 | 2003-01-23 | English | Non-destructive testing - Magnetic particle testing - Part 2: Detection media |
| 447 | DS DS/ISO 5984-2003 | 2003-01-23 | English | Animal feeding stuffs - Determination of crude ash |
| 448 | DS DS/EN 13720-2003 | 2003-01-23 | English | Transportable gas cylinders - Filling conditions for acetylene battery vehicles |
| 449 | DS DS/EN 10151-2003 | 2003-01-23 | English | Stainless steel strip for springs - Technical delivery conditions |
| 450 | DS DS/ISO 5985-2003 | 2003-01-23 | English | Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid |
| 451 | DS DS/EN ISO 105-X16-2003 | 2003-01-23 | English | Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas |
| 452 | DS DS/EN 10295-2003 | 2003-01-23 | English | Heat resistant steel castings |
| 453 | DS DS/EN 12484-4-2003 | 2003-01-23 | English | Irrigation techniques - Automatic turf irrigation systems - Part 4: Installation and Acceptance |
| 454 | DS DS/ISO 15176-2003 | 2003-01-23 | English | Soil quality - Characterization of excavated soil and other soil materials intended for re-use |
| 455 | DS DS/EN 13406-2003 | 2003-01-23 | English | Agricultural machinery - Slurry tankers and spreading devices - Environmental protection - Requirements and test metods for the spreading precision |
| 456 | DS DS/EN ISO 16426-2003 | 2003-01-23 | English | Fasteners - Quality assurance system |
| 457 | DS DS/ISO 17155-2003 | 2003-01-23 | English | Soil quality - Determination of abundance and activity of soil microflora using respiration curves |
| 458 | DS DS/EN ISO 6876-2003 | 2003-01-23 | English | Dental root canal sealing materials |
| 459 | DS DS/EN 1071-2-2003 | 2003-01-23 | English | Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method |
| 460 | DS DS/EN 286-1/A1-2003 | 2003-01-23 | English | Simple unfired pressure vessels designed to contain air or nitrogen - Part 1: Pressure vessels for general purposes |
| 461 | DS DS/EN 14233-2003 | 2003-01-23 | English | Materials and articles in contact with foodstuffs - Plastics - Temperature at the plastics/food interface - Determination of temperature of plastics and materials and articles at the plastics/food interface during microwave and conventional oven heating i |
| 462 | DS DS/ISO 15884-2003 | 2003-01-23 | English | Milk fat - Preparation of fatty acid methyl esters |
| 463 | DS DS/EN ISO 3146/AC-2003 | 2003-01-23 | English | Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| 464 | DS DS/ISO 6493-2003 | 2003-01-23 | English | Animal feeding stuffs - Determination of starch content - Polarimetric method |
| 465 | DS DS/ISO 15885-2003 | 2003-01-23 | English | Milk fat - Determination of the fatty acid composition by gas-liquid chromatography |
| 466 | DS DS/EN 13293-2003 | 2003-01-23 | English | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless normalized carbon manganese steel gas cylinders of water capacity up to 0,5 litre for compressed, liquefied and dissolved gases and up to 1 li |
| 467 | DS DS/EN 60127-10-2003 | 2003-01-21 | English | Miniature fuses - Part 10: User guide for miniature fuses |
| 468 | DS DS/EN 50365-2003 | 2003-01-21 | English | Electrically insulating helmets for use on low voltage installations |
| 469 | DS DS/EN 60947-4-2/A1+Corr.-2003 | 2003-01-21 | English | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| 470 | DS DS-Håndbog 118-2003 | 2003-01-17 | Danish, English | Non-destructive testing of welds |
| 471 | DS DS/EN 12697-29-2003 | 2003-01-17 | English | Bituminous mixtures - Test methods for hot mix asphalt - Part 29: Determination of the dimensions of bituminous specimen |
| 472 | DS DS/EN 12697-7-2003 | 2003-01-17 | English | Bituminous mixtures - Test methods for hot mix asphalt - Part 7: Determination of bulk density of bituminous specimens by gamma rays |
| 473 | DS DS/EN 13043-2003 | 2003-01-17 | English | Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas |
| 474 | DS DS/EN 13240-2003 | 2003-01-16 | Danish, English | Roomheaters fired by solid fuel - Requirements and test methods |
| 475 | DS DS/ISO 11222-2003 | 2003-01-16 | English | Air quality - Determination of the uncertainty of the time average of air quality measurements |
| 476 | DS DS/HD 384.2 S2-2003 | 2003-01-16 | English | International electrotechnical vocabulary - Chapter 826: Electrical installations of buildings |
| 477 | DS DS/EN 50098-1/A1-2003 | 2003-01-16 | English | Customer premises cabling for Information Technology - Part 1: ISDN basic access |
| 478 | DS DS/EN 60335-2-3+Corr.-2003 | 2003-01-16 | English | Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons |
| 479 | DS DS/EN 13656-2003 | 2003-01-16 | English | Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| 480 | DS DS/EN 62019-2003 | 2003-01-16 | English | Electrical accessories - Circuit-breakers and similar equipment for household use - Auxiliary contact units |
| 481 | DS DS/EN ISO 14620-1-2003 | 2003-01-16 | English | Space systems - Safety requirements - Part 1: System safety |
| 482 | DS DS/EN 60848-2003 | 2003-01-16 | English | GRAFCET specification language for sequential function charts |
| 483 | DS DS/EN 13996-2003 | 2003-01-16 | English | Surface active agents - Foaming power and antifoaming power - Turbine stirring method |
| 484 | DS DS/EN 50075-2003 | 2003-01-16 | English | Flat non-rewirable two-pole plugs, 2,5 A 250 V, with cord, for the connection of class II-equipment for household and similar purposes |
| 485 | DS DS/EN 13528-2-2003 | 2003-01-16 | English | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 2: Specific requirements and test methods |
| 486 | DS DS/EN 50250+Corr.-2003 | 2003-01-16 | English | Conversion adaptors for industrial use |
| 487 | DS DS/EN 13528-1-2003 | 2003-01-16 | English | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements |
| 488 | DS DS/EN 301127 V1.3.1-2003 | 2003-01-15 | English | Fixed Radio Systems; Point-to-point equipment; High capacity digital radio systems carrying SDH signals (up to 2 x STM-1) in frequency bands with about 30 MHz channel spacing and using co-polar arrangements or Co-Channel Dual Polarized (CCDP) operation |
| 489 | DS DS/EN 301815-5 V1.1.1-2003 | 2003-01-15 | English | Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 5: Test Suite Structure and Test Purposes (TSS& |
| 490 | DS DS/EN 301815-6 V.1.1.1-2003 | 2003-01-15 | English | Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 6: Abstract Test Suite (ATS) and partial Protoc |
| 491 | DS DS/EN 300373-1 v1.2.1-2003 | 2003-01-15 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Maritime mobile transmitters and receivers for use in the MF and HF bands; Part 1: Technical characteristics and methods of measurement |
| 492 | DS DS/EN 301140-2 V1.4.1-2003 | 2003-01-15 | English | Intelligent Network (IN); Intelligent Network Application Protocol (INAP); Capability Set 2 (CS2); Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification |
| 493 | DS DS/EN 300430 V1.4.1-2003 | 2003-01-15 | English | Fixed Radio Systems; Point-to-point equipment; Parameters for radio systems for the transmission of STM-1 digital signals operating in the 18 GHz frequency band with channel spacing of 55 MHz and 27,5 MHz |
| 494 | DS DS/EN 300431 V1.4.1-2003 | 2003-01-15 | English | Fixed Radio Systems; Point-to-point equipment; Parameters for radio system for the transmission of digital signals operating in the frequency range 24,50 GHz to 29,50 GHz |
| 495 | DS DS/EN 301068-6 V1.2.1-2003 | 2003-01-15 | English | Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Connection characteristics; ATM transfer capability and traffic parameter indication; Part 6: Abstract Test Suite (ATS) and partial Prot |
| 496 | DS DS/EN prEN 300743 V1.2.1-2003 | 2003-01-15 | English | Digital Video Broadcasting (DVB); Subtitling systems |
| 497 | DS DS/EN 301937 V1.1.1-2003 | 2003-01-15 | English | Services and Protocols for Advanced Networks (SPAN); Number portability for ETNS services |
| 498 | DS DS/EN 301815-2 V1.1.1-2003 | 2003-01-15 | English | Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 2: Protocol Implementation Conformance Statemen |
| 499 | DS DS/EN 301815-3 V1.1.1-2003 | 2003-01-15 | English | Broadband Integrated Services Digital Network (B-ISDN); Digital Subscriber Signalling System No. two (DSS2) protocol; Quality of Service class and parameters indication at call/connection establishment; Part 3: Test Suite Structure and Test Purposes (TSS& |
| 500 | DS DS/EN 300396-10 V1.1.2-2003 | 2003-01-15 | English | Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 10: Managed Direct Mode Operation (M-DMO) |
|