| Pos | standard Number | publication date | Language | Description |
| 1 | DS DS/EN 12407-2007 | 2007-04-25 | English | Natural stone test methods - Petrographic examination |
| 2 | DS DS/EN 12229-2007 | 2007-04-25 | English | Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces |
| 3 | DS DS/EN 2349-412-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 412: Seal |
| 4 | DS DS/EN 2349-414-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 414: Mechanical shock |
| 5 | DS DS/EN 2349-415-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 415: Acceleration |
| 6 | DS DS/EN 4165-009-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 009: Rack and panel plug for 2 and 4 modules, series 3 - Product standard |
| 7 | DS DS/EN 2349-601-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 601: Compass safety distance |
| 8 | DS DS/EN 4165-008-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 008: Rack and panel plug for 2 and 4 modules, series 2 - Product standard |
| 9 | DS DS/EN 4165-007-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard |
| 10 | DS DS/EN 15336-2007 | 2007-04-24 | English | Adhesives - Determination of the time to rupture of bonded joints under static load |
| 11 | DS DS/EN 2349-411-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 411: Temperature change |
| 12 | DS DS/EN 2349-410-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 410: Mould |
| 13 | DS DS/EN 2349-409-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 409: Ozone resistance |
| 14 | DS DS/EN ISO 11140-4-2007 | 2007-04-24 | English | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| 15 | DS DS/EN 2349-413-2007 | 2007-04-24 | English | Aerospace series - Requirements and test procedures for relays and contactors - Part 413: Vibration, sinusoidal and random |
| 16 | DS DS/CEN/TR 15588-2007 | 2007-04-24 | English | Hardware for furniture - Terms for hinges and their components |
| 17 | DS DS/EN 4165-010-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 010: Rack and panel rear mounted plug for 2 and 4 modules, series 2 - Product standard |
| 18 | DS DS/EN 4165-023-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 023: Tooling for assembly of receptacle coding component - Product standard |
| 19 | DS DS/EN 4165-021-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 021: Coupling system keyway for plug - Product standard |
| 20 | DS DS/EN 14983-2007 | 2007-04-24 | English | Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
| 21 | DS DS/EN 4165-020-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 020: Coupling system keyway for receptacle - Product standard |
| 22 | DS DS/EN 4165-011-2007 | 2007-04-24 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 011: Flange mounting receptacle 2 and 4 modules, series 2 - Product standard |
| 23 | DS DS/EN ISO 17872-2007 | 2007-04-24 | English | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| 24 | DS DS/EN 14591-2-2007 | 2007-04-23 | English | Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers |
| 25 | DS DS/EN 81714-2-2007 | 2007-04-23 | English | Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange |
| 26 | DS DS/EN 60027-1/A2-2007 | 2007-04-23 | English | Letter symbols to be used in electrical technology - Part 1: General |
| 27 | DS DS/EN 14629-2007 | 2007-04-23 | English | Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete |
| 28 | DS DS/EN 15208-2007 | 2007-04-23 | English | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifications |
| 29 | DS DS/EN 60745-2-5-2007 | 2007-04-23 | English | Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws |
| 30 | DS DS/EN 12487-2007 | 2007-04-23 | English | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| 31 | DS DS/CLC/TR 50493-2007 | 2007-04-20 | English | National wordings of laser warning labels |
| 32 | DS DS-Håndbog 112.3-2007 | 2007-04-20 | Danish, English | Technical product documentation - Mechanical mechanical engineering drawings - Part 3: Specific drawings indications |
| 33 | DS DS-Håndbog 112.1-2007 | 2007-04-20 | Danish, English | Technical product documentation - Mechanical engineering drawings - Part 1: General |
| 34 | DS DS/EN 50367-2007 | 2007-04-20 | English | Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
| 35 | DS DS/EN 62273-1-2007 | 2007-04-20 | English | Methods of measurement for radio transmitters - Part 1: Performance characteristics of terrestrial digital television transmitters |
| 36 | DS DS/EN 14885-2007 | 2007-04-20 | English | Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics |
| 37 | DS DS/EN 62041-2007 | 2007-04-20 | English | Power transformers, power supply units, reactors and similar products - EMC requirements |
| 38 | DS DS/EN 60444-9-2007 | 2007-04-20 | English | Measurement of quartz crystal unit parameters -- Part 9: Measurement of spurious resonances of piezoelectric crystal units |
| 39 | DS DS/EN 1996-2-2007 | 2007-04-19 | Danish, English | Eurocode 6 - Design of masonry structures - Part 2: Design considerations, selection of materials and execution of masonry |
| 40 | DS DS/EN 10311/ZA-2007 | 2007-04-19 | Danish, English | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| 41 | DS DS/EN 1052-3/A1-2007 | 2007-04-19 | English | Methods of test for masonry - Part 3: Determination of initial shear strength |
| 42 | DS DS/EN ISO 18594-2007 | 2007-04-19 | English | Resistance spot-, projection- and seam-welding - Method for determining the transition resistance on aluminium and steel material |
| 43 | DS DS/CEN/TS 14754-1-2007 | 2007-04-19 | English | Curing compounds - Test methods - Part 1: Determination of water retention efficiency of common curing compounds |
| 44 | DS DS/EN 13175 + A2-2007 | 2007-04-19 | English | LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings |
| 45 | DS DS/EN ISO 11334-1-2007 | 2007-04-19 | English | Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches |
| 46 | DS DS/EN ISO 10720-2007 | 2007-04-18 | English | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas |
| 47 | DS DS/EN 12698-1-2007 | 2007-04-17 | English | Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods |
| 48 | DS DS/EN 15311-2007 | 2007-04-17 | English | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| 49 | DS DS/EN 12698-2-2007 | 2007-04-17 | English | Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods |
| 50 | DS DS/EN 15340-2007 | 2007-04-17 | English | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| 51 | DS DS/ISO 3951-1-2007 | 2007-04-17 | Danish, English | Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| 52 | DS DS/EN 301178-2 V1.2.2-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 2: Harmonized EN covering essent |
| 53 | DS DS/EN 301025-3 V1.3.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 3: Harmonized EN under article 3.3 (e) of the R&TTE Direct |
| 54 | DS DS/EN 301178-1 V1.3.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDSS applications only); Part 1: Technical characteristics an |
| 55 | DS DS/EN 61526-2007 | 2007-04-16 | English, French | Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters and monitors |
| 56 | DS DS/IEC/TR 62350-2007 | 2007-04-16 | English | Guidance for the correct use of residual current-operated protective devices (RCDs) for household and similar use |
| 57 | DS DS/IEC/TR 62316-2007 | 2007-04-16 | English | Guidance for the interpretation of OTDR backscattering traces |
| 58 | DS DS/EN 302500-1 V1.1.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical characteristics and test |
| 59 | DS DS/EN 302500-2 V1.1.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 2: Harmonized EN covering essential r |
| 60 | DS DS/EN 62317-9/A1-2007 | 2007-04-16 | English | Ferrite cores - Dimensions - Part 9: Planar cores |
| 61 | DS DS/EN 301025-2 V1.3.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| 62 | DS DS/EN 301929-2 v1.2.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive |
| 63 | DS DS/EN 301025-1 V1.3.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for class "D" Digital Selective Calling (DSC); Part 1: Technical characteristics and methods of measurement |
| 64 | DS DS/EN 301929-1 V1.2.1-2007 | 2007-04-16 | English | Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the maritime mobile service; Part 1: Technical characteristics and methods of measurement |
| 65 | DS DS/EN 3913-2007 | 2007-04-14 | English | Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni-P100HT, Inconel 718), silver plated on internal thread, for salvage of components |
| 66 | DS DS/EN 4165-002-2007 | 2007-04-14 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements |
| 67 | DS DS/EN 3155-029-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 029: Contacts, electrical, coaxial, shielded, size 16, female, type D, crimp, class R - Product standard |
| 68 | DS DS/EN 4165-004-2007 | 2007-04-14 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175°C continuous - Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 - Product standard |
| 69 | DS DS/EN 4165-005-2007 | 2007-04-14 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 - Product standard |
| 70 | DS DS/EN 3645-013-2007 | 2007-04-14 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 013: Dummy receptacle - Product standard |
| 71 | DS DS/EN 4165-006-2007 | 2007-04-14 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 006: Plug for 2 and 4 modules, series 2 - Product standard |
| 72 | DS DS/EN 4165-001-2007 | 2007-04-14 | English | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 001: Technical specification |
| 73 | DS DS/EN 3155-040-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard |
| 74 | DS DS/EN 3155-046-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 046: Contacts, electrical, male, type A, double crimping, class S - Product standard |
| 75 | DS DS/EN 3155-041-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R - Product standard |
| 76 | DS DS/EN 3155-044-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 044: Contacts, electrical, male 044, type A, double crimping, class T - Product standard |
| 77 | DS DS/EN 3155-052-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 052: Contacts, electrical, male 052, type A, crimp, class S - Product standard |
| 78 | DS DS/EN 3155-047-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 047: Contacts, electrical, female, type A, double crimping, class S - Product standard |
| 79 | DS DS/EN 3155-039-2007 | 2007-04-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 039: Contacts, electrical, coaxial, size 16, female, type D, solder, class R - Product standard |
| 80 | DS DS/EN 3912-2007 | 2007-04-14 | English | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification: 1 100 MPa (at ambient temperature) / 650 °C |
| 81 | DS DS/EN 15317-2007 | 2007-04-13 | English | Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment |
| 82 | DS DS/EN 14986-2007 | 2007-04-13 | English | Design of fans working in potentially explosive atmospheres |
| 83 | DS DS/EN 569-2007 | 2007-04-13 | English | Mountaineering equipment - Pitons - Safety requirements and test methods |
| 84 | DS DS/ISO 17899-2007 | 2007-04-12 | English | Ships and marine technology - Marine electric window wipers |
| 85 | DS DS/CEN/TR 13233-2007 | 2007-04-12 | English | Advanced technical ceramics - Notations and symbols |
| 86 | DS DS/HD 384.5.52 S1/A1/Corr-2007 | 2007-04-12 | English | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Chapter 52: Wiring systems |
| 87 | DS DS/CLC/TS 61111-2007 | 2007-04-12 | English | Matting of insulating material for electrical purposes |
| 88 | DS DS/CWA 15660-2007 | 2007-04-12 | English | Providing good practice for E-Learning quality approaches |
| 89 | DS DS/HD 60364-7-705-2007 | 2007-04-12 | English | Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises |
| 90 | DS DS/CWA 15661-2007 | 2007-04-12 | English | Providing E-Learning supplies transparency profiles |
| 91 | DS DS/EN 13084-1-2007 | 2007-04-12 | English | Free-standing chimneys - Part 1: General requirements |
| 92 | DS DS/ISO 799-2007 | 2007-04-12 | English | Ships and marine technology - Pilot ladders |
| 93 | DS DS/IEC/TR 60344-2007 | 2007-04-11 | English | Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires - Application guide |
| 94 | DS DS/EN 61000-4-1-2007 | 2007-04-11 | English | Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
| 95 | DS DS/IEC/TR 61000-2-14-2007 | 2007-04-11 | English | Electromagnetic compatibility (EMC) - Part 2-14: Environment - Overvoltages on public electricity distribution networks |
| 96 | DS DS/EN 61300-2-38-2007 | 2007-04-11 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized fibre optic closures |
| 97 | DS DS/EN 61000-4-12-2007 | 2007-04-11 | English | Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test |
| 98 | DS DS/EN 55020-2007 | 2007-04-11 | English | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
| 99 | DS DS/EN 2821-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D <= 200 mm - Rm >= 1310 MPa |
| 100 | DS DS/EN 3646-001-2007 | 2007-04-10 | English | Aerospace series - Connectors, electrical, circular, bayonet coupling, op-erating temperature 175 °C or 200 °C continuous - Part 001: Technical specification |
| 101 | DS DS/EN 3532-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a <= 40 mm - 1750 MPa <= Rm <= 2000 MPa |
| 102 | DS DS/EN 3531-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a <= 6 mm - 1 750 MPa <= Rm <= 2 000 MPa |
| 103 | DS DS/EN 3527-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PL1504 (33CrMoV12) - Air melted - Softened - Forging stock - a or D <= 300 mm |
| 104 | DS DS/EN 3526-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm <= a <= 6 mm - 980 MPa <= Rm <= 1180 MPa |
| 105 | DS DS/EN 3525-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a <= 20 mm - 1080 MPa <= Rm <= 1280 MPa |
| 106 | DS DS/EN 4588-2007 | 2007-04-10 | English | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| 107 | DS DS/EN 3524-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm <= a <= 6 mm - 1080 MPa <= Rm <= 1280 MPa |
| 108 | DS DS/EN 3646-002-2007 | 2007-04-10 | English | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements |
| 109 | DS DS/EN 3155-004-2007 | 2007-04-10 | English | Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard |
| 110 | DS DS/EN 3523-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Bar for machining - De <= 100 mm - 1080 MPa <= Rm <= 1280 MPa |
| 111 | DS DS/EN 3490-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Bar for machining - De <= 200 mm - 900 MPa <= Rm <= 1100 MPa |
| 112 | DS DS/EN 3683-2007 | 2007-04-10 | English | Aerospace series - Test methods - Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method |
| 113 | DS DS/EN 3684-2007 | 2007-04-10 | English | Aerospace series - Test methods - Titanium alloy wrought products - Determination of b (beta) transus temperature - Metallographic method |
| 114 | DS DS/EN 2469-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm <= D <= 12,5 mm - 450 MPa <= Rm <= 650 MPa |
| 115 | DS DS/EN 3677-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D <= 200 mm - Rm >= 1310 MPa |
| 116 | DS DS/EN 4006-2007 | 2007-04-10 | English | Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm <= a <= 6 mm |
| 117 | DS DS/EN 4005-2007 | 2007-04-10 | English | Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm <= a <= 6 mm |
| 118 | DS DS/EN 3645-001-2007 | 2007-04-10 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification |
| 119 | DS DS/EN 4004-2007 | 2007-04-10 | English | Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm <= a <= 6 mm |
| 120 | DS DS/EN 3114-002-2007 | 2007-04-10 | English | Aerospace series - Test method - Microstructure of (alpha + beta) titanium alloy wrought products - Part 002: Microstructure of bars, sections, forging stock and forgings |
| 121 | DS DS/EN 2003-010-2007 | 2007-04-10 | English | Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content |
| 122 | DS DS/EN 2003-009-2007 | 2007-04-10 | English | Aerospace series - Test methods - Titanium and titanium alloys - Part 009: Determination of surface contamination |
| 123 | DS DS/EN 3645-002-2007 | 2007-04-10 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements |
| 124 | DS DS/EN 3671-2007 | 2007-04-10 | English | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Non heat treated - Forging stock - a or D <= 250 mm |
| 125 | DS DS/EN 4001-2007 | 2007-04-10 | English | Aerospace series - Aluminium alloy AL-P2024-T351 - Clad sheet and strip with improved chemical milling capability 1,6 mm <= a <= 6 mm |
| 126 | DS DS/EN 3998-2007 | 2007-04-10 | English | Aerospace series - Aluminium alloy AL-P2024-T4 or T42 - Sheet and strip 0,3 mm <= a <= 6 mm |
| 127 | DS DS/EN 3997-2007 | 2007-04-10 | English | Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip 0,4 mm < a < 6 mm |
| 128 | DS DS/EN 3479-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a <= 20 mm - 1070 MPa <= Rm <= 1220 MPa |
| 129 | DS DS/EN 3638-2007 | 2007-04-10 | English | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm <= a <= 10 mm |
| 130 | DS DS/EN 3678-2007 | 2007-04-10 | English | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D <= 200 mm - Rm >= 930 MPa |
| 131 | DS DS/EN 15271-2007 | 2007-04-04 | English | Inland navigation vessels - Studless anchor chain - Anchor equipment |
| 132 | DS DS/EN 15272-2-2007 | 2007-04-04 | English | Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead |
| 133 | DS DS/EN 61557-5-2007 | 2007-04-04 | English | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth |
| 134 | DS DS/EN 61557-4-2007 | 2007-04-04 | English | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 4: Resistance of earth connection and equipotential bonding |
| 135 | DS DS/EN 61557-3-2007 | 2007-04-04 | English | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance |
| 136 | DS DS/EN 61557-2-2007 | 2007-04-04 | English | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
| 137 | DS DS/EN 61557-1-2007 | 2007-04-04 | English | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements |
| 138 | DS DS/EN 61557-7-2007 | 2007-04-04 | English | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence |
| 139 | DS DS/EN 50272-4-2007 | 2007-04-04 | English | Safety requirements for secondary batteries and battery installations - Part 4: Batteries for use in portable appliances |
| 140 | DS DS/EN 14317-2-2007 | 2007-04-02 | English | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products |
| 141 | DS DS/EN 14316-2-2007 | 2007-04-02 | English | Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products |
| 142 | DS DS/CEN/TR 15438-2007 | 2007-04-02 | English | Plastics piping systems - Guidance for coding of products and their intended uses |
| 143 | DS DS/EN 13967/A1-2007 | 2007-04-02 | English | Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics |
| 144 | DS DS/EN 13969/A1-2007 | 2007-04-02 | English | Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics |
| 145 | DS DS/EN ISO 16812-2007 | 2007-04-02 | English | Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers |
| 146 | DS DS/EN 13947-2007 | 2007-04-02 | English | Thermal performance of curtain walling - Calculation of thermal transmittance |
| 147 | DS DS/EN ISO 14224-2007 | 2007-04-02 | English | Petroleum, petrochemical and natural gas industries - Collection and exchange of reliability and maintenance data for equipment |
| 148 | DS DS/EN 60216-3 + CD-rom-2007 | 2007-03-30 | English | Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics |
| 149 | DS DS/HD 60364-5-54-2007 | 2007-03-30 | English | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements, protective conductors and protective bonding conductors |
| 150 | DS DS/IEC 62198-2007 | 2007-03-30 | English | Project risk management - Application guidelines |
| 151 | DS DS/EN 10021-2007 | 2007-03-30 | Danish, English | General technical delivery conditions for steel products |
| 152 | DS DS/EN 60691/A1-2007 | 2007-03-29 | English | Thermal-links - Requirements and application guide |
| 153 | DS DS/EN ISO 7143-2007 | 2007-03-29 | English | Binders for paints and varnishes - Methods of test for characterizing water-based binders |
| 154 | DS DS/EN 15169-2007 | 2007-03-28 | English | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| 155 | DS DS/ISO 10014/Corr. 1-2007 | 2007-03-28 | English | Quality management - Guidelines for realizing financial and economic benefits |
| 156 | DS DS/ISO 15202-3-2007 | 2007-03-28 | English | Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3: Analysis |
| 157 | DS DS/ISO 16740-2007 | 2007-03-28 | English | Workplace air - Determination of hexavalent chromium in airborne particulate matter - Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide |
| 158 | DS DS/EN 60034-26-2007 | 2007-03-28 | English | Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors |
| 159 | DS DS/HD 620 S1/A3-2007 | 2007-03-28 | English | Distribution cables with extruded insulation for rated voltages from 3,6/6 (7,2) kV to 20,8/36 (42) kV |
| 160 | DS DS/EN ISO 9073-13-2007 | 2007-03-27 | English | Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time |
| 161 | DS DS/EN ISO 9073-14-2007 | 2007-03-27 | English | Textiles - Test methods for nonwovens - Part 14: Coverstock wetback |
| 162 | DS DS/EN ISO 13936-3-2007 | 2007-03-27 | English | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method |
| 163 | DS DS/EN ISO 150-2007 | 2007-03-26 | English | Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test |
| 164 | DS DS/EN 60947-4-2/A2-2007 | 2007-03-26 | English | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| 165 | DS DS/EN ISO 6504-3-2007 | 2007-03-26 | English | Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| 166 | DS DS/EN 60947-4-3/A1-2007 | 2007-03-26 | English | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| 167 | DS DS/EN ISO 7142-2007 | 2007-03-26 | English | Binders for paints and varnishes - Epoxy resins - General methods of test |
| 168 | DS DS/EN ISO 11909-2007 | 2007-03-26 | English | Binders for paints and varnishes - Polyisocyanate resins - General methods of test |
| 169 | DS DS/CLC/TS 61112-2007 | 2007-03-26 | English | Blankets of insulating material for electrical purposes |
| 170 | DS DS/EN 60947-5-8-2007 | 2007-03-26 | English | Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches |
| 171 | DS DS/EN 13407/ZA-2007 | 2007-03-26 | Danish, English | Wall-hung urinals - Functional requirements and test methods |
| 172 | DS DS/ISO 15184-2007 | 2007-03-26 | English | Paints and varnishes - Determination of film hardness by pencil test |
| 173 | DS DS-Håndbog 162.1 + CD-rom-2007 | 2007-03-26 | English | Process plant documentation - Graphical symbols for process diagrams |
| 174 | DS DS/EN 81-71 + A1-2007 | 2007-03-26 | English | Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts |
| 175 | DS DS/EN ISO 14637-2007 | 2007-03-23 | English | Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) |
| 176 | DS DS/EN 60445-2007 | 2007-03-22 | English | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals and conductor terminations |
| 177 | DS DS/EN 14420-7 + A1-2007 | 2007-03-21 | English | Hose fittings with clamp units - Part 7: Cam locking couplings |
| 178 | DS DS/EN 14963/ZA-2007 | 2007-03-21 | Danish, English | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| 179 | DS DS/EN 14420-8 + A1-2007 | 2007-03-21 | English | Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system) |
| 180 | DS DS/EN 14420-1 + A1-2007 | 2007-03-21 | English | Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing |
| 181 | DS DS/EN 14420-4 + A1-2007 | 2007-03-21 | English | Hose fittings with clamp units - Part 4: Flange connections |
| 182 | DS DS/EN 54-2/A1/ZA-2007 | 2007-03-21 | Danish, English | Fire detection and fire alarm systems - Part 2: Control and indicating equipment |
| 183 | DS DS/EN 54-11/A1/ZA-2007 | 2007-03-21 | Danish, English | Fire detection and fire alarm systems - Part 11: Manual call points |
| 184 | DS DS/EN 54-10/A1/ZA-2007 | 2007-03-21 | Danish, English | Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors |
| 185 | DS DS/EN 14420-6 + A1-2007 | 2007-03-21 | English | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| 186 | DS DS/CEN/TS 15448-2007 | 2007-03-20 | English | Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) |
| 187 | DS DS/EN ISO 11979-1-2007 | 2007-03-20 | English, French | Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary |
| 188 | DS DS/EN 10296-2/AC-2007 | 2007-03-20 | English | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 189 | DS DS/EN 10297-2/AC-2007 | 2007-03-20 | English | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel |
| 190 | DS DS/EN ISO 21570/AC-2007 | 2007-03-20 | English | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods |
| 191 | DS DS 233-2007 | 2007-03-19 | Danish | Water quality - Settleable matter |
| 192 | DS DS/EN 60670-22-2007 | 2007-03-16 | English | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures |
| 193 | DS DS/EN 62271-202-2007 | 2007-03-16 | English | High-voltage switchgear and controlgear - Part 202: High voltage/low voltage prefabricated substation |
| 194 | DS DS/EN 175301-801-2007 | 2007-03-16 | English | Detail Specification: High density rectangular connectors, round removable crimp contacts |
| 195 | DS DS/HD 60364-6-2007 | 2007-03-16 | English | Low voltage electrical installations - Part 6: Verification |
| 196 | DS DS/EN 60086-2-2007 | 2007-03-16 | English | Primary batteries - Part 2: Physical and electrical specifications |
| 197 | DS DS/EN 60086-1-2007 | 2007-03-16 | English | Primary batteries - Part 1: General |
| 198 | DS DS/EN ISO 16834-2007 | 2007-03-16 | English | Welding consumables - Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels - Classification |
| 199 | DS DS/EN 1996-1-2-2007 | 2007-03-16 | Danish, English | Eurocode 6 - Design of masonry structures - Part 1-2: General rules - Structural fire design |
| 200 | DS DS/EN 2020-2007 | 2007-03-15 | English | Bearings, airframe rolling, single row, self aligning roller bearings in corrosion resisting steel, diameter series 3 and 4 - Dimensions and loads - Aerospace series |
| 201 | DS DS/EN 2017-2007 | 2007-03-15 | English | Bearings, airframe rolling, double row, self aligning ball bearings, in corrosion resisting steel, diameter series 2 - Dimensions and loads - Aerospace series |
| 202 | DS DS/EN 1057/ZA-2007 | 2007-03-15 | Danish, English | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| 203 | DS DS/EN 2499-2007 | 2007-03-15 | English | Aerospace series - Computer output microfiche (COM) - A6 microfiche |
| 204 | DS DS/EN 2547-2007 | 2007-03-15 | English | Aerospace series - Filming of documents - Microfilm 105 mm (microfiche A6) |
| 205 | DS DS/EN 2011-2007 | 2007-03-15 | English | Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 8 and 9 - Dimensions and loads - Aerospace series |
| 206 | DS DS/EN 2014-2007 | 2007-03-15 | English | Bearings, airframe rolling, rigid, single row ball bearings in corrosion resisting steel, diameter series 0 and 2 - Dimensions and loads - Aerospace series |
| 207 | DS DS/EN 2544-2007 | 2007-03-15 | English | Aerospace series - Representation of rivets on drawings for aerospace equipment |
| 208 | DS DS/EN 15088/ZA-2007 | 2007-03-15 | Danish, English | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
| 209 | DS DS/ISO 3951-2-2007 | 2007-03-14 | English | Sampling procedures for inspection by variables - Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| 210 | DS DS/ISO 3951-5-2007 | 2007-03-14 | English | Sampling procedures for inspection by variables - Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| 211 | DS DS/ISO 8422-2007 | 2007-03-14 | English | Sequential sampling plans for inspection by attributes |
| 212 | DS DS/EN 60938-1/A1-2007 | 2007-03-14 | English | Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification |
| 213 | DS DS/EN 60747-16-1/A1-2007 | 2007-03-14 | English | Semiconductor devices - Part 16-1: Microwave integrated circuits - Amplifiers |
| 214 | DS DS/EN 60825-2/A1-2007 | 2007-03-14 | English | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| 215 | DS DS/ISO 3534-2-2007 | 2007-03-14 | English, French | Statistics - Vocabulary and symbols - Part 2: Applied statistics |
| 216 | DS DS/ISO 3534-1-2007 | 2007-03-14 | English, French | Statistics - Vocabulary and symbols - Part 1: General statistical terms and terms used in probability |
| 217 | DS DS/IEC/TS 61094-7-2007 | 2007-03-14 | English | Measurement microphones - Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones |
| 218 | DS DS/ISO 2859-10-2007 | 2007-03-14 | English | Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| 219 | DS DS/ISO 10396-2007 | 2007-03-13 | English | Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| 220 | DS DS/EN 60027-1-2007 | 2007-03-13 | English | Letter symbols to be used in electrical technology - Part 1: General |
| 221 | DS DS/EN ISO 12680-1-2007 | 2007-03-13 | English | Methods of test for refractory products - Part 1: Determination of dynamic Youngs modulus (MOE) by impulse excitation of vibration |
| 222 | DS DS/EN ISO 16000-5-2007 | 2007-03-13 | English | Indoor air - Part 5: Sampling strategy for volatile organic compounds (VOCs) |
| 223 | DS DS/ISO 17858-2007 | 2007-03-13 | English | Water quality - Determination of dioxin-like polychlorinated biphenyls - Method using gas chromatography/mass spectrometry |
| 224 | DS DS/CEN/TR 15547-2007 | 2007-03-13 | English | Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics |
| 225 | DS DS-håndbog 106.6-2007 | 2007-03-12 | Danish, English | Welding - Part 6: Quality |
| 226 | DS DS-hæfte 30-2007 | 2007-03-12 | Danish | Se dansk titel |
| 227 | DS DS/CEN/TS 15568-2007 | 2007-03-12 | English | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Sampling strategies |
| 228 | DS DS/EN 1482-1-2007 | 2007-03-09 | English | Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling |
| 229 | DS DS/EN 1482-2-2007 | 2007-03-09 | English | Fertilizers and liming materials - Sampling and sample preparation - Part 2: Sample preparation |
| 230 | DS DS/EN 1504-6-2007 | 2007-03-09 | Danish, English | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar |
| 231 | DS DS/EN 1504-7-2007 | 2007-03-09 | Danish, English | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| 232 | DS DS/EN 45020-2007 | 2007-03-08 | English, French, Russian, German | Standardization and related activities - General vocabulary |
| 233 | DS DS/ISO 11462-1-2007 | 2007-03-08 | Danish, English | Guidelines for implementation of statistical process control (SPC) - Part 1: Elements of SPC |
| 234 | DS DS/EN 60071-1-2007 | 2007-03-07 | English | Insulation co-ordination - Part 1: Definitions, principles and rules |
| 235 | DS DS/EN 50369-2007 | 2007-03-07 | English | Liquid tight sheathing systems for cable management |
| 236 | DS DS/EN ISO 15004-2-2007 | 2007-03-07 | English | Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection |
| 237 | DS DS/EN ISO 10939-2007 | 2007-03-07 | English | Ophthalmic instruments - Slit-lamp microscopes |
| 238 | DS DS/EN ISO 15496/AC-2007 | 2007-03-06 | English | Textiles - Measurement of water vapour permeability of textiles for the purpose of quality control |
| 239 | DS DS/EN 61243-1/Corr. 1-2007 | 2007-03-06 | English | Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| 240 | DS DS/EN 13758-2 + A1-2007 | 2007-03-06 | English | Textiles - Solar UV protective properties - Part 2: Classification and marking of apparel |
| 241 | DS DS/EN 61643-321-2007 | 2007-03-06 | English | Components for low-voltage surge protective devices -- Part 321: Specifications for avalanche breakdown diode (ABD) |
| 242 | DS DS/EN 13758-1 + A1-2007 | 2007-03-06 | English | Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics |
| 243 | DS DS/EN ISO 9241-400-2007 | 2007-03-06 | English | Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices |
| 244 | DS DS/EN 62271-3-2007 | 2007-03-06 | English | High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 |
| 245 | DS DS/EN 61643-11/A11-2007 | 2007-03-06 | English | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and tests |
| 246 | DS DS/EN 62076-2007 | 2007-03-06 | English | Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces |
| 247 | DS DS/EN ISO 105-E06/AC-2007 | 2007-03-06 | English | Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali |
| 248 | DS DS/EN 60947-8/A1-2007 | 2007-03-06 | English | Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
| 249 | DS DS/EN 60974-4-2007 | 2007-03-06 | English | Arc welding equipment - Part 4: In-service inspection and testing |
| 250 | DS DS/HD 60364-7-704-2007 | 2007-03-06 | English | Low-voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations |
| 251 | DS DS/EN 61481/Corr. 2-2007 | 2007-03-06 | English | Live working - Portable phase comparators for voltages of 1 kV to 36 kV a.c. |
| 252 | DS DS/EN 61472/Corr. 1-2007 | 2007-03-06 | English | Live working - Minimum approach distances for A.C. systems in the voltage range 72,5 kV to 800 kV - A method of calculation |
| 253 | DS DS/ISO/IEC 14543-3-7-2007 | 2007-03-06 | English | Information technology - Home electronic system (HES) architecture - Part 3-7: Media and media dependent layers - Radio frequency for network based control of HES Class 1 |
| 254 | DS DS/HD 60364-7-703-2007 | 2007-03-06 | English | Electrical installations of buildings - Part 7-703: Requirements for special installations or locations - Rooms and cabins containing sauna heaters |
| 255 | DS DS/EN 14994-2007 | 2007-03-06 | English | Gas explosion venting protective systems |
| 256 | DS DS/EN ISO 13937-1/AC-2007 | 2007-03-06 | English | Textiles - Tear properties of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
| 257 | DS DS/ISO/IEC 14543-3-6-2007 | 2007-03-06 | English | Information technology - Home electronic system (HES) architecture - Part 3-6: Media and media dependent layers - Twisted pair for network based control of HES Class 1 |
| 258 | DS DS/EN 12277-2007 | 2007-03-06 | English | Mountaineering equipment - Harnesses - Safety requirements and test methods |
| 259 | DS DS/EN ISO 12947-1/AC-2007 | 2007-03-06 | English | Textiles - Determination of abrasion resistance of fabrics by the Martindale method - Part 1: Martindale abrasion testing apparatus |
| 260 | DS DS/ISO/IEC 14543-3-4-2007 | 2007-03-06 | English | Information technology - Home electronic system (HES) architecture - Part 3-4: System management - Management procedures for network based control of HES Class 1 |
| 261 | DS DS/HD 60364-4-41-2007 | 2007-03-06 | English | Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| 262 | DS DS/ISO/IEC 14543-3-3-2007 | 2007-03-06 | English | Information technology - Home electronic system (HES) architecture - Part 3-3: User process for network based control of HES Class 1 |
| 263 | DS DS/EN ISO 12947-4/AC-2007 | 2007-03-06 | English | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 4: Assessment of appearance change |
| 264 | DS DS/EN ISO 12947-3/AC-2007 | 2007-03-06 | English | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 3: Determination of mass loss |
| 265 | DS DS/EN ISO 4507-2007 | 2007-03-05 | English | Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test |
| 266 | DS DS/EN ISO 2808-2007 | 2007-03-05 | English | Paints and varnishes - Determination of film thickness |
| 267 | DS DS/EN 13799/AC-2007 | 2007-03-05 | English | Contents gauges for LPG tanks |
| 268 | DS DS/EN ISO 11507-2007 | 2007-03-05 | English | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water |
| 269 | DS DS/CEN ISO/TR 20883-2007 | 2007-03-05 | English | Footwear - Performance requirements for components for footwear - Shanks |
| 270 | DS DS/CEN ISO/TR 20882-2007 | 2007-03-05 | English | Footwear - Performance requirements for components for footwear - Lining and insocks |
| 271 | DS DS/CEN ISO/TR 20881-2007 | 2007-03-05 | English | Footwear - Performance requirements for components for footwear - Insoles |
| 272 | DS DS/CEN ISO/TR 20572-2007 | 2007-03-05 | English | Footwear - Performance requirements for components for footwear - Accessories |
| 273 | DS DS/CEN ISO/TR 20879-2007 | 2007-03-05 | English | Footwear - Performance requirements for components for footwear - Uppers |
| 274 | DS DS/CEN ISO/TR 20880-2007 | 2007-03-05 | English | Footwear - Performance requirements for components for footwear - Outsoles |
| 275 | DS DS/CEN ISO/TR 22648-2007 | 2007-03-05 | English | Footwear - Performance requirements for components for footwear - Stiffeners and toepuffs |
| 276 | DS DS/EN 15146-2007 | 2007-03-02 | English | Solid softwood panelling and cladding - Machined profiles without tongue and groove |
| 277 | DS DS/CEN ISO/TR 3834-6-2007 | 2007-03-02 | Danish, English | Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 |
| 278 | DS DS/EN 12972-2007 | 2007-03-02 | English | Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| 279 | DS DS/EN 14354/AC-2007 | 2007-03-02 | English | Wood-based panels - Wood veneer floor covering |
| 280 | DS DS/EN 3-8-2007 | 2007-03-02 | English | Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
| 281 | DS DS/EN 13121-4/AC-2007 | 2007-03-02 | English | GRP tanks and vessels for use above ground - Part 4: Delivery, installation and maintenance |
| 282 | DS DS/EN 14358-2007 | 2007-03-02 | English | Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample |
| 283 | DS DS/EN 15529-2007 | 2007-03-02 | English | Derivatives from coal pyrolysis - Terminology |
| 284 | DS DS/EN 62056-61-2007 | 2007-03-02 | English | Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) |
| 285 | DS DS/CLC/TR 61800-6-2007 | 2007-03-02 | English | Adjustable speed electrical power drive systems - Part 6: Guide for determination of types of load duty and corresponding current ratings |
| 286 | DS DS/EN 62056-62-2007 | 2007-03-02 | English | Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes |
| 287 | DS DS/EN 12516-1/AC-2007 | 2007-03-02 | English | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| 288 | DS DS/EN 383-2007 | 2007-03-02 | English | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| 289 | DS DS/EN 61300-3-24-2007 | 2007-03-02 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre |
| 290 | DS DS/EN 61300-3-15-2007 | 2007-03-02 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface |
| 291 | DS DS/EN 61300-3-14-2007 | 2007-03-02 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator |
| 292 | DS DS/EN 12101-10/AC-2007 | 2007-03-02 | English | Smoke and heat control systems - Part 10: Power supplies |
| 293 | DS DS/EN 14390-2007 | 2007-03-02 | English | Fire test - Large-scale room reference test for surface products |
| 294 | DS DS/EN 10280 + A1-2007 | 2007-03-02 | English | Magnetic materials - Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester |
| 295 | DS DS/EN 54-18/AC-2007 | 2007-03-02 | English | Fire detection and fire alarm systems - Part 18: Input/output devices |
| 296 | DS DS/EN 61300-2-37-2007 | 2007-03-02 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures |
| 297 | DS DS/EN ISO 20346/AC-2007 | 2007-03-02 | English | Personal protective equipment - Protective footwear |
| 298 | DS DS/EN ISO 1265-2007 | 2007-03-01 | English | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles |
| 299 | DS DS/EN ISO 1872-2-2007 | 2007-03-01 | English | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties |
| 300 | DS DS/EN 14268/AC-2007 | 2007-03-01 | English | Irrigation techniques - Meters for irrigation water |
| 301 | DS DS/EN 10339-2007 | 2007-03-01 | English | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| 302 | DS DS/EN ISO 6149-1-2007 | 2007-03-01 | English | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal |
| 303 | DS DS/EN ISO 6149-2-2007 | 2007-03-01 | English | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| 304 | DS DS/EN ISO 6149-3-2007 | 2007-03-01 | English | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| 305 | DS DS/EN 1395-3-2007 | 2007-02-27 | English | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying |
| 306 | DS DS/EN 1395-7-2007 | 2007-02-27 | English | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems |
| 307 | DS DS/EN 60155/A2-2007 | 2007-02-27 | English | Glow-starters for fluorescent lamps |
| 308 | DS DS/EN 1395-2-2007 | 2007-02-27 | English | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF |
| 309 | DS DS/EN 1395-5-2007 | 2007-02-27 | English | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5: Plasma spraying in chambers |
| 310 | DS DS/EN 1395-1-2007 | 2007-02-27 | English | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements |
| 311 | DS DS/EN 1395-4-2007 | 2007-02-27 | English | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4: Plasma spraying |
| 312 | DS DS/EN 1395-6-2007 | 2007-02-27 | English | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems |
| 313 | DS DS/EN 1337-4/AC-2007 | 2007-02-27 | English | Structural bearings - Part 4: Roller bearings |
| 314 | DS DS/CEN/TR 15353-2007 | 2007-02-27 | English | Plastics - Recycled plastics - Guidelines for the development of standards for recycled plastics |
| 315 | DS DS/EN 14915/ZA-2007 | 2007-02-26 | Danish, English | Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking |
| 316 | DS DS/EN 12094-5/ZA-2007 | 2007-02-26 | Danish, English | Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators |
| 317 | DS DS/EN 570-2007 | 2007-02-26 | English | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
| 318 | DS DS/EN 12094-6/ZA-2007 | 2007-02-26 | Danish, English | Fixed firefighting systems - Components for gas extinguishing systems - Part 6: Requirements and test methods for non-electrical disable devices |
| 319 | DS DS/EN 12094-8/ZA-2007 | 2007-02-26 | Danish, English | Fixed firefighting systems - Components for gas extinguishing systems - Part 8: Requirements and test methods for connectors |
| 320 | DS DS/EN ISO 2812-5-2007 | 2007-02-26 | English | Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method |
| 321 | DS DS/EN ISO 2812-4-2007 | 2007-02-26 | English | Paints and varnishes - Determination of resistance to liquids - Part 4: Spotting methods |
| 322 | DS DS/EN ISO 2812-3-2007 | 2007-02-26 | English | Paints and varnishes - Determination of resistance to liquids - Part 3: Method using an absorbent medium |
| 323 | DS DS/EN ISO 2812-2-2007 | 2007-02-26 | English | Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method |
| 324 | DS DS/EN ISO 2812-1-2007 | 2007-02-26 | English | Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water |
| 325 | DS DS/EN ISO 17249-2007 | 2007-02-26 | English | Safety footwear with resistance to chain saw cutting – Amendment 1 |
| 326 | DS DS/EN 1396-2007 | 2007-02-26 | English | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| 327 | DS DS/EN 14782/ZA-2007 | 2007-02-26 | Danish, English | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| 328 | DS DS/CEN/TS 13547-2007 | 2007-02-26 | English | Industrial valves - Copper alloy ball valves |
| 329 | DS DS/EN ISO 17249/A1-2007 | 2007-02-26 | English | Safety footwear with resistance to chain saw cutting - Amendment 1 |
| 330 | DS DS/EN 13791-2007 | 2007-02-23 | English | Assessment of in-situ compressive strength in structures and precast concrete components |
| 331 | DS DS/ISO 639-3-2007 | 2007-02-23 | English | Codes for the representation of names of languages - Part 3: Alpha-3 code for comprehensive coverage of languages |
| 332 | DS DS/ISO 1951-2007 | 2007-02-23 | English | Presentation/representation of entries in dictionaries - Requirements, recommendations and information |
| 333 | DS DS/EN 14063-1/AC-2007 | 2007-02-23 | English | Thermal insulation products - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation |
| 334 | DS DS/ISO/TS 22003-2007 | 2007-02-21 | English | Food safety management systems - Requirements for bodies providing audit and certification of food safety management systems |
| 335 | DS DS/CLC/TR 62258-3-2007 | 2007-02-21 | English | Semiconductor die products - Part 3: Recommendations for good practice in handling, packing and storage |
| 336 | DS DS/EN 60938-2/A1-2007 | 2007-02-21 | English | Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification |
| 337 | DS DS/EN 15016-2/AC-2007 | 2007-02-21 | English | Technical drawings - Railway applications - Part 2: Parts lists |
| 338 | DS DS/EN 725-5-2007 | 2007-02-20 | English | Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution |
| 339 | DS DS/EN ISO 13628-9-2007 | 2007-02-20 | English | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: Remotely Operated Tool (ROT) intervention systems |
| 340 | DS DS/EN 15024-2-2007 | 2007-02-20 | English | Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometry method (FAAS) |
| 341 | DS DS/CEN/TS 14421-2007 | 2007-02-20 | English | Hose tail and ferrule for crimping and swaging |
| 342 | DS DS/EN 725-3-2007 | 2007-02-20 | English | Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
| 343 | DS DS/EN 14475/AC-2007 | 2007-02-20 | English | Execution of special geotechnical works - Reinforced fill |
| 344 | DS DS/EN ISO 15663-1-2007 | 2007-02-20 | English | Petroleum and natural gas industries - Life cycle costing - Part 1: Methodology |
| 345 | DS DS/EN 14932-2007 | 2007-02-20 | English | Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods |
| 346 | DS DS/EN 62056-47-2007 | 2007-02-19 | English | Electricity metering - Data exchange for meter reading, tariff and load control -- Part 47: COSEM transport layers for IPv4 networks |
| 347 | DS DS/EN 61755-3-5-2007 | 2007-02-19 | English | Fibre optic connector optical interfaces - Part 3-5: Optical Interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| 348 | DS DS/EN 61755-3-6-2007 | 2007-02-19 | English | Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| 349 | DS DS/EN ISO 12402-7-2007 | 2007-02-19 | English | Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods |
| 350 | DS DS/EN ISO 12402-5/AC-2007 | 2007-02-19 | English | Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements |
| 351 | DS DS/EN 13981-4-2007 | 2007-02-19 | English | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4: Forgings |
| 352 | DS DS/EN 60874-1-2007 | 2007-02-19 | English | Connectors for optical fibres and cables - Part 1: Generic specification |
| 353 | DS DS/EN 1318/AC-2007 | 2007-02-19 | English | Textile floor coverings - Determination of the apparent effective thickness of the backing |
| 354 | DS DS/EN ISO 787-25-2007 | 2007-02-19 | English | General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method |
| 355 | DS DS/EN 61000-6-4-2007 | 2007-02-19 | English | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| 356 | DS DS/EN 61000-6-3-2007 | 2007-02-19 | English | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| 357 | DS DS/EN 61300-2-33-2007 | 2007-02-19 | English | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-33: Tests - Assembly and disassembly of fibre optic closures |
| 358 | DS DS/EN 14041/AC-2007 | 2007-02-15 | English | Resilient, textile and laminate floor coverings - Essential characteristics |
| 359 | DS DS/EN 60598-2-6:/IS 01-2007 | 2007-02-15 | English | Interpretation sheet to IEC 60598-2-6 - Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers for filament lamps |
| 360 | DS DS/EN 60598-2-5/IS 01-2007 | 2007-02-15 | English | Interpretation sheet to IEC 60598-2-5 - Luminaries - Part 2: Particular requirements - Section 5: Floodlights |
| 361 | DS DS/EN 54-20/ZA-2007 | 2007-02-14 | Danish, English | Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors |
| 362 | DS DS/EN 3155-014-2007 | 2007-02-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard |
| 363 | DS DS/EN 3155-015-2007 | 2007-02-14 | English | Aerospace series - Electrical contacts used in elements of connection - Part 015: Contacts, electrical, female, type A, crimp, class S - Product standard |
| 364 | DS DS/EN 54-21/ZA-2007 | 2007-02-14 | Danish, English | Fire detection and fire alarm systems - Part 21: Alarm transmission and fault warning routing equipment |
| 365 | DS DS/EN 14783/ZA-2007 | 2007-02-14 | Danish, English | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| 366 | DS DS/EN 3645-012-2007 | 2007-02-14 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 012: Lanyard release plug with grounding fingers - Type 2 - Product standard |
| 367 | DS DS/EN 3645-011-2007 | 2007-02-14 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 011: Lanyard release plug with grounding fingers - Type 1 - Product standard |
| 368 | DS DS/EN 3645-010-2007 | 2007-02-14 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 010: Receptacle, hermetic, round flange, jam nut mounting - Product standard |
| 369 | DS DS/EN 3645-009-2007 | 2007-02-14 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 009: Receptacle, round flange, jam nut mounting - Product standard |
| 370 | DS DS/EN 14904/ZA-2007 | 2007-02-14 | Danish, English | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
| 371 | DS DS/EN 3645-006-2007 | 2007-02-14 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 006: Protective cover for receptacle - Product standard |
| 372 | DS DS/EN 14209/ZA-2007 | 2007-02-14 | Danish, English | Preformed plasterboard cornices - Definitions, requirements and test methods |
| 373 | DS DS/EN 14909/ZA-2007 | 2007-02-14 | Danish, English | Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics |
| 374 | DS DS/EN 14179-2/ZA-2007 | 2007-02-14 | Danish, English | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| 375 | DS DS/EN 3491-2007 | 2007-02-14 | English | Aerospace series - Steel FE-PM3901 (X15CrNi17-3) - Air melted - Hardened and tempered - Forgings - De <= 100 mm - 900 MPa <= Rm <= 1 100 MPa |
| 376 | DS DS/EN 3507-2007 | 2007-02-14 | English | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Hardened and tempered - Forgings - De <= 100 mm - 930 MPa <= Rm <= 1 080 MPa |
| 377 | DS DS/EN 54-17/ZA-2007 | 2007-02-14 | Danish, English | Fire detection and fire alarm systems - Part 17: Short-circuit isolators |
| 378 | DS DS/EN 54-18/ZA-2007 | 2007-02-14 | Danish, English | Fire detection and fire alarm systems - Part 18: Input/output devices |
| 379 | DS DS/EN 3339-2007 | 2007-02-14 | English | Aerospace series - Aluminium alloy AL-P7010- - T76 - Die forgings - a <= 200 mm |
| 380 | DS DS/EN 14964/ZA-2007 | 2007-02-14 | Danish, English | Rigid underlays for discontinuous roofing - Definitions and characteristics |
| 381 | DS DS/EN 14967/ZA-2007 | 2007-02-14 | Danish, English | Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics |
| 382 | DS DS/EN 516/ZA-2007 | 2007-02-14 | Danish, English | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| 383 | DS DS/EN 517/ZA-2007 | 2007-02-14 | Danish, English | Prefabricated accessories for roofing - Roof safety hooks |
| 384 | DS DS/EN 14889-2/ZA-2007 | 2007-02-14 | Danish, English | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity |
| 385 | DS DS/EN 1873/ZA-2007 | 2007-02-14 | Danish, English | Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods |
| 386 | DS DS/EN 14246/ZA-2007 | 2007-02-14 | Danish, English | Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
| 387 | DS DS/EN 13950/ZA-2007 | 2007-02-14 | Danish, English | Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| 388 | DS DS/EN 3645-004-2007 | 2007-02-14 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, hermetic, square flange mounting - Product standard |
| 389 | DS DS/EN 14509/ZA-2007 | 2007-02-14 | Danish, English | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| 390 | DS DS/EN 14889-1/ZA-2007 | 2007-02-14 | Danish, English | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
| 391 | DS DS/EN 3476-2007 | 2007-02-14 | English | Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - a or D <= 300 mm |
| 392 | DS DS/EN ISO 19903-2007 | 2007-02-13 | English | Petroleum and natural gas industries - Fixed concrete offshore structures |
| 393 | DS DS/EN ISO 13628-8-2007 | 2007-02-13 | English | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 8: Remotely Operated Vehicle (ROV) interfaces on subsea production systems |
| 394 | DS DS/EN 12271-2007 | 2007-02-13 | English | Surface dressing - Requirements |
| 395 | DS DS/CLC/TR 50488-2007 | 2007-02-09 | English | Railway applications - Safety measures for the personnel working on or near overhead contact lines |
| 396 | DS DS/EN ISO 13628-10-2007 | 2007-02-09 | English | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe |
| 397 | DS DS/EN ISO 12947-2/AC-2007 | 2007-02-09 | English | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown |
| 398 | DS DS/EN ISO 13679-2007 | 2007-02-09 | English | Petroleum and natural gas industries - Procedures for testing casing and tubing connections |
| 399 | DS DS/EN ISO 5943-2007 | 2007-02-09 | English | Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method |
| 400 | DS DS/EN 60704-2-13/A1-2007 | 2007-02-09 | English | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods |
| 401 | DS DS/EN 62034-2007 | 2007-02-09 | English | Automatic test systems for battery powered emergency escape lighting |
| 402 | DS DS/EN 60335-2-2/A2-2007 | 2007-02-09 | English | Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances |
| 403 | DS DS/EN 60335-2-35/A1-2007 | 2007-02-09 | English | Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters |
| 404 | DS DS/EN ISO 661/AC-2007 | 2007-02-09 | English | Animal and vegetable fats and oils - Preparation of test sample |
| 405 | DS DS/EN ISO 14692-2/AC-2007 | 2007-02-09 | English | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture |
| 406 | DS DS/EN ISO 20483-2007 | 2007-02-09 | English | Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method |
| 407 | DS DS/EN ISO 16663-2/AC-2007 | 2007-02-09 | English | Fishing nets - Method of test for the determination of mesh size - Part 2: Length of mesh |
| 408 | DS DS/EN 60335-2-97-2007 | 2007-02-09 | English | Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment |
| 409 | DS DS/EN 61347-2-7-2007 | 2007-02-09 | English | Lamp controlgear - Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting |
| 410 | DS DS/EN 61287-1-2007 | 2007-02-09 | English | Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods |
| 411 | DS DS/EN ISO 10405-2007 | 2007-02-09 | English | Petroleum and natural gas industries - Care and use of casing and tubing |
| 412 | DS DS/EN 62261-2-2007 | 2007-02-08 | English | Television METADATA - Part 2: Data encoding protocol using key-length-value |
| 413 | DS DS/EN 62261-1-2007 | 2007-02-08 | English | Television METADATA - Part 1: Metadata dictionary structure |
| 414 | DS DS/EN 14902/AC-2007 | 2007-02-08 | English | Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter |
| 415 | DS DS/EN 14647/AC-2007 | 2007-02-08 | English | Calcium aluminate cement - Composition, specifications and conformity criteria |
| 416 | DS DS/EN 61606-4-2007 | 2007-02-08 | English | Audio and audiovisual equipment - Digital audio parts - Basic measurement methods of audio characteristics - Part 4: Personal computer |
| 417 | DS DS/EN 60565-2007 | 2007-02-08 | English | Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz |
| 418 | DS DS/EN 455-3-2007 | 2007-02-07 | English | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
| 419 | DS DS/EN ISO 10535-2007 | 2007-02-07 | English | Hoists for the transfer of disabled persons - Requirements and test methods |
| 420 | DS DS/ISO/TR 5660-3-2007 | 2007-02-06 | English | Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 3: Guidance on measurement |
| 421 | DS DS/EN 230-2007 | 2007-02-06 | English | Automatic burner control systems for oil burners |
| 422 | DS DS/EN 14438-2007 | 2007-02-06 | English | Gas-fired insets for heating more than one room |
| 423 | DS DS/EN 15091-2007 | 2007-02-05 | English | Sanitary tapware - Electronic opening and closing sanitary tapware |
| 424 | DS DS/EN 14876-2007 | 2007-02-02 | English | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
| 425 | DS DS/EN 61165-2007 | 2007-02-02 | English | Application of Markov techniques |
| 426 | DS DS/EN ISO 5667-1-2007 | 2007-02-02 | English | Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques |
| 427 | DS DS/EN 1926-2007 | 2007-02-02 | English | Natural stone test methods - Determination of uniaxial compressive strength |
| 428 | DS DS/EN 60706-3-2007 | 2007-02-02 | English | Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data |
| 429 | DS DS/EN ISO 14505-2-2007 | 2007-02-02 | English | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature |
| 430 | DS DS/EN 60706-2-2007 | 2007-02-02 | English | Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase |
| 431 | DS DS/EN 60034-5/A1-2007 | 2007-02-02 | English | Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| 432 | DS DS/EN 60079-7-2007 | 2007-02-02 | English | Explosive atmospheres - Part 7: Equipment protection by increased safety "e" |
| 433 | DS DS/EN 60079-11-2007 | 2007-02-02 | English | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| 434 | DS DS/EN 1022-2007 | 2007-02-02 | Danish, English | Domestic furniture - Seating - Determination of stability |
| 435 | DS DS/EN 61124-2007 | 2007-02-02 | English | Reliability testing - Compliance tests for constant failure rate and constant failure intensity |
| 436 | DS DS/EN 1993-1-9 + AC-2007 | 2007-02-02 | Danish, English | Eurocode 3: Design of steel structures - Part 1-9: Fatigue |
| 437 | DS DS/EN 60076-13-2007 | 2007-02-01 | English | Power transformers - Part 13: Self-protected liquid-filled transformers |
| 438 | DS DS/CEN/TS 15415-2007 | 2007-02-01 | English | Solid recovered fuels - Determination of particle size distribution by screen method |
| 439 | DS DS/CEN/TS 15364-2007 | 2007-02-01 | English | Characterization of waste - Leaching behaviour tests - Acid and base neutralization capacity test |
| 440 | DS DS/EN 61163-1-2007 | 2007-02-01 | English | Reliability stress screening - Part 1: Repairable assemblies manufactured in lots |
| 441 | DS DS/CLC/TS 50131-4-2007 | 2007-02-01 | English | Alarm systems - Intrusion and hold-up systems - Part 4: Warning devices |
| 442 | DS DS/EN 15115-2007 | 2007-02-01 | English | Textile floor coverings - Determination of sensitivity to spilled water |
| 443 | DS DS/EN 14346-2007 | 2007-02-01 | English | Characterization of waste - Calculation of dry matter by determination of dry residue or water content |
| 444 | DS DS/CEN/TR 15310-5-2007 | 2007-02-01 | English | Characterization of waste - Sampling of waste materials - Part 5: Guidance on the process of defining the sampling plan |
| 445 | DS DS/EN 62308-2007 | 2007-02-01 | English | Equipment reliability - Reliability assessment methods |
| 446 | DS DS/EN 55014-1-2007 | 2007-01-31 | English | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| 447 | DS DS/EN 61000-6-1-2007 | 2007-01-31 | English | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| 448 | DS DS/EN 566-2007 | 2007-01-31 | English | Mountaineering equipment - Slings - Safety requirements and test methods |
| 449 | DS DS/EN 564-2007 | 2007-01-31 | English | Mountaineering equipment - Accessory cord - Safety requirements and test methods |
| 450 | DS DS/EN 565-2007 | 2007-01-31 | English | Mountaineering equipment - Tape - Safety requirements and test methods |
| 451 | DS DS/EN 180101-2007 | 2007-01-31 | English | Blank detail specification: Fixed fibre optic attenuators |
| 452 | DS DS/EN 469/A1-2007 | 2007-01-30 | English | Protective clothing for firefighters - Performance requirements for protective clothing for firefighting |
| 453 | DS DS/EN 365/AC-2007 | 2007-01-30 | English | Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging |
| 454 | DS DS/CEN/TS 14826-2007 | 2007-01-30 | English | Postal services - Automatic identification of items - Two dimensional bar code symbol print quality specification for machine readable Digital Postage Marks |
| 455 | DS DS/CEN/TS 14773-2007 | 2007-01-30 | English | Postal services - Quality of service - Measurement of loss and substantial delay in priority and first class single piece mail using a survey of test letters |
| 456 | DS DS/EN 546-1-2007 | 2007-01-30 | English | Aluminium and aluminium alloys - Foil - Part 1: Technical conditions for inspection and delivery |
| 457 | DS DS/EN 546-2-2007 | 2007-01-30 | English | Aluminium and aluminium alloys - Foil - Part 2: Mechanical properties |
| 458 | DS DS/EN 546-4-2007 | 2007-01-30 | English | Aluminium and aluminium alloys - Foil - Part 4: Special property requirements |
| 459 | DS DS/EN 14797-2007 | 2007-01-30 | English | Explosion venting devices |
| 460 | DS DS/ISO/TS 16610-41-2007 | 2007-01-30 | English | Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters |
| 461 | DS DS/ISO/TS 16610-49-2007 | 2007-01-30 | English | Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques |
| 462 | DS DS/EN 546-3-2007 | 2007-01-30 | English | Aluminium and aluminium alloys - Foil - Part 3: Tolerances on dimensions |
| 463 | DS DS/ISO/TS 16610-22-2007 | 2007-01-29 | English | Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters |
| 464 | DS DS/ISO/TS 16610-29-2007 | 2007-01-29 | English | Geometrical product specifications (GPS) - Filtration - Part 29: Linear profile filters: Spline wavelets |
| 465 | DS DS/ISO/TS 16610-40-2007 | 2007-01-29 | English | Geometrical product specifications (GPS) - Filtration - Part 40: Morphological profile filters: Basic concepts |
| 466 | DS DS/EN 3716-005-2007 | 2007-01-29 | English | Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 005: Crimp receptacle - Product standard |
| 467 | DS DS/EN 3716-006-2007 | 2007-01-29 | English | Aerospace series - Connector, single-way with triaxial interface, for transmission of digital data - Part 006: Crimp plug - Product standard |
| 468 | DS DS/EN 3155-059-2007 | 2007-01-29 | English | Aerospace series - Electrical contacts used in elements of connection - Part 059: Contacts, electrical, coaxial, size 16, female, type D, solder, class R Product standard |
| 469 | DS DS/EN 4008-017-2007 | 2007-01-29 | English | Aerospace series – Elements of electrical and optical connection – Crimping tools and associated accessories – Part 017: Head for crimping tool M22520/4-01 – Product standard |
| 470 | DS DS/EN 4008-017-2007 | 2007-01-29 | English | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 017: Head for crimping tool M22520/4-01 - Product standard |
| 471 | DS DS/EN 4354-2007 | 2007-01-29 | English | Aerospace series - Six lobe recess - Drivers, relieved |
| 472 | DS DS/EN 4356-2007 | 2007-01-29 | English | Aerospace series - Six lobe recess - Drivers, short |
| 473 | DS DS/EN 4357-2007 | 2007-01-29 | English | Aerospace series - Six lobe recess - Drivers, handle |
| 474 | DS DS/EN 4358-2007 | 2007-01-29 | English | Aerospace series - Six lobe recess - Drivers, double ended, 90° |
| 475 | DS DS/EN 4359-2007 | 2007-01-29 | English | Aerospace series - Six lobe recess - Drivers - Technical specification |
| 476 | DS DS/EN 4382-2007 | 2007-01-29 | English | Aerospace series - Heat resisting alloy NI-PH3601 (NiCr22Mo9Nb) - Solution treated - Seamless tubes - For hydraulic application - D <= 50 mm, a <= 3 mm |
| 477 | DS DS/EN 4383-2007 | 2007-01-29 | English | Aerospace series - Heat resisting alloy NI-CH2601 (NiCr19Fe19Nb5Mo3) - Non heat treated - Remelting stock |
| 478 | DS DS/EN ISO 8501-4-2007 | 2007-01-29 | English, French, German | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting |
| 479 | DS DS/ISO/TS 16610-1-2007 | 2007-01-29 | English | Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts |
| 480 | DS DS/ISO/TS 16610-20-2007 | 2007-01-29 | English | Geometrical product specifications (GPS) - Filtration - Part 20: Linear profile filters: Basic concepts |
| 481 | DS DS/EN 3645-005-2007 | 2007-01-29 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 005: Receptacle, hermetic, round flange, brasage mounting - Product standard |
| 482 | DS DS/EN 3645-003-2007 | 2007-01-29 | English | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 003: Receptacle square flange mounting - Product standard |
| 483 | DS DS/EN 3114-004-2007 | 2007-01-29 | English | Aerospace series - Test method - Microstructure of (alpha + beta) titanium alloy wrought products - Part 004: Microstructure of sheet for superplastic forming |
| 484 | DS DS/EN 3114-001-2007 | 2007-01-29 | English | Aerospace series - Test method - Microstructure of (alpha + beta) titanium alloy wrought products - Part 001: General requirements |
| 485 | DS DS/EN 4530-005-2007 | 2007-01-29 | English | Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm - Product standard |
| 486 | DS DS/EN 4530-006-2007 | 2007-01-29 | English | Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard |
| 487 | DS DS/EN 4057-406-2007 | 2007-01-29 | English | Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention |
| 488 | DS DS/EN 4057-404-2007 | 2007-01-29 | English | Aerospace series - Cable ties for harnesses - Test methods - Part 404: Low temperature installation |
| 489 | DS DS/EN 4057-402-2007 | 2007-01-29 | English | Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle |
| 490 | DS DS/EN 3969-2007 | 2007-01-29 | English | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D <= 350 mm |
| 491 | DS DS/EN 3971-2007 | 2007-01-29 | English | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Annealed - Forging stock - a or D <= 350 mm |
| 492 | DS DS/EN 3972-2007 | 2007-01-29 | English | Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - De <= 50 mm - 1 250 MPa <= Rm <= 1 400 MPa |
| 493 | DS DS/EN 4057-401-2007 | 2007-01-29 | English | Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength |
| 494 | DS DS/EN 3973-2007 | 2007-01-29 | English | Aerospace series - Steel FE-CM3801 (X5CrNiCuNb16-4) - Homogenized, solution treated and precipitation hardened - Investment casting - De <= 50 mm - Rm >= 1 030 MPa |
| 495 | DS DS/EN 4057-306-2007 | 2007-01-29 | English | Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test |
| 496 | DS DS/EN 3976-2007 | 2007-01-29 | English | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| 497 | DS DS/EN 4057-304-2007 | 2007-01-29 | English | Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature |
| 498 | DS DS/EN 4057-100-2007 | 2007-01-29 | English | Aerospace series - Cable ties for harnesses - Test methods - Part 100: General |
| 499 | DS DS/EN 4049-001-2007 | 2007-01-29 | English | Aerospace series - Thermocouple extension cable - Operating temperatures between - 65 °C to 260 °C - Part 001: Technical specification |
| 500 | DS DS/EN 3114-003-2007 | 2007-01-29 | English | Aerospace series - Test method - Microstructure of (alpha + beta) titanium alloy wrought products - Part 003: Microstructure of plate |
|