We offers a broad range of engineering and technical standards, specifications, codes in PDF for personal education purpose with affortable price. Any requirements please contact fdcrw@qq.com.

STANDARD SEARCH->DS STANDARD LIST:

Total count:28870 records, Page:1 |2 |3 |4 |5 |6 |7 |8 |9 |10 |11 |12 |13 |14 |15 |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 |32 |33 |34 |35 |36 |37 |38 |39 |40 |41 |42 |43 |44 |45 |46 |47 |48 |49 |50 |51 |52 |53 |54 |55 |56 |57 |58 |
Posstandard Numberpublication dateLanguageDescription
1DS DS/EN 754-7-20082008-04-15EnglishAluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 7: Seamless tubes, tolerances on dimensions and form
2DS DS/EN 755-9-20082008-04-15EnglishAluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
3DS DS/EN 754-6-20082008-04-15EnglishAluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
4DS DS/EN 754-4-20082008-04-15EnglishAluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form
5DS DS/EN 3685-20082008-04-15EnglishAerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification: 1 100 MPa/650 °C - Technical specification
6DS DS/EN 754-3-20082008-04-15EnglishAluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form
7DS DS/EN 754-2-20082008-04-15EnglishAluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties
8DS DS/EN 3294-20082008-04-15EnglishAerospace series - Bolts, T-head, close tolerance, in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts -Classification: 1 210 MPa/730 °C
9DS DS/EN 3710-20082008-04-15EnglishAerospace series - Sockets, bi-hexagonal - Technical Specification
10DS DS/EN 3298-20082008-04-15EnglishAerospace series - Inserts, thin wall, self-locking - Installation and removal procedure
11DS DS/EN 4626-101-20082008-04-15EnglishAerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 101: Optical contact (sub-assembly) for plug -
12DS DS/EN 4626-004-20082008-04-15EnglishAerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 004: Adaptor for receptacle
13DS DS/EN 4626-003-20082008-04-15EnglishAerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 003: Adaptor for plug
14DS DS/EN 3717-20082008-04-15EnglishAerospace series - Tubes - Selection for engines fluid systems
15DS DS/EN 754-1-20082008-04-15EnglishAluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 1: Technical conditions for inspection and delivery
16DS DS/EN 3711-20082008-04-15EnglishAerospace series - Wrench-double ended, bi-hexagonal - Straight, cranked, offset
17DS DS/EN 4399-20082008-04-15EnglishAerospace series - Rings, threaded, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
18DS DS/EN 4626-002-20082008-04-15EnglishAerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts - Part 002: Specification of performance and contact a
19DS DS/EN 3635-20082008-04-15EnglishAerospace series - Weld lip - Geometrical configuration
20DS DS/EN 1677-2 + A1-20082008-04-15EnglishComponents for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8
21DS DS/EN 3368-20082008-04-15EnglishAerospace series - Aerospace design standard - Holes for locating pins
22DS DS/EN 10084-20082008-04-15EnglishCase hardening steels - Technical delivery conditions
23DS DS/EN 3745-203-20082008-04-15EnglishAerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203: Cable dimensions
24DS DS/EN 3636-20082008-04-15EnglishAerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 900 MPa/650 °C
25DS DS/EN 3148-20082008-04-15EnglishAerospace series - Shank nuts, self-locking, flange restrained - Installation procedure
26DS DS/EN 3630-20082008-04-15EnglishAerospace series - Fluid fittings, flanged, straight - Sealing by O-ring for 0,8 mm thick tubes
27DS DS/EN ISO 21227-4-20082008-04-15EnglishPaints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 4: Evaluation of filiform corrosion
28DS DS/EN ISO 15012-2-20082008-04-15EnglishHealth and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles
29DS DS/EN 754-5-20082008-04-15EnglishAluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form
30DS DS/EN 3201-20082008-04-15EnglishAerospace series - Holes for metric threaded fasteners - Design standard
31DS DS/EN 1677-3 + A1-20082008-04-15EnglishComponents for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8
32DS DS/EN 61158-5-15-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-15: Application layer service definition - Type 15 elements
33DS DS/EN 61158-5-20-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-20: Application layer service definition - Type 20 elements
34DS DS/EN 61158-5-19-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-19: Application layer service definition - Type 19 elements
35DS DS/EN 61158-5-18-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-18: Application layer service definition - Type 18 elements
36DS DS/EN 61158-5-17-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-17: Application layer service definition - Type 17 elements
37DS DS/EN 61158-5-16-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-16: Application layer service definition - Type 16 elements
38DS DS/EN 61158-5-12-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements
39DS DS/EN 61158-5-14-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements
40DS DS/EN 61158-5-13-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements
41DS DS/EN 61158-3-7-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-7: Data-link layer service definition - Type 7 elements
42DS DS/EN 61158-3-11-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-11: Data-link layer service definition - Type 11 elements
43DS DS/EN 61158-4-12-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications -- Part 4-12: Data-link layer protocol specification - Type 12 elements
44DS DS/EN 61158-3-12-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements
45DS DS/EN 61158-3-2-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-2: Data-link layer service definition - Type 2 elements
46DS DS/EN 61158-3-19-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-19: Data-link layer service definition - Type 19 elements
47DS DS/EN 61158-3-3-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-3: Data-link layer service definition - Type 3 elements
48DS DS/EN 61158-3-18-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-18: Data-link layer service definition - Type 18 elements
49DS DS/EN 61158-3-17-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-17: Data-link layer service definition - Type 17 elements
50DS DS/EN 61158-3-4-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-4: Data-link layer service definition - Type 4 elements
51DS DS/EN 61158-3-13-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-13: Data-link layer service definition - Type 13 elements
52DS DS/EN 61158-3-8-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements
53DS DS/EN 61158-3-16-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-16: Data-link layer service definition - Type 16 elements
54DS DS/EN 61158-3-14-20082008-04-14EnglishIndustrial communication networks - Fieldbus specifications - Part 3-14: Data-link layer service definition - Type 14 elements
55DS DS/EN 845-3 + A1/ZA-20082008-04-14Danish, EnglishSpecification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
56DS DS/EN 845-3 + A1-20082008-04-14EnglishSpecification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork
57DS DS/EN 845-1 + A1/ZA-20082008-04-14Danish, EnglishSpecification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
58DS DS/EN 845-1 + A1-20082008-04-14EnglishSpecification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets
59DS DS/EN 50377-3-1-20082008-04-11EnglishConnector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
60DS DS/EN 14488-4 + A1-20082008-04-11EnglishTesting sprayed concrete - Part 4: Bond strength of cores by direct tension
61DS DS/EN 55016-1-4/A1-20082008-04-11EnglishSpecification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances
62DS DS/IEC 62153-4-9-20082008-04-11EnglishMetallic communication cable test methods - Part 4-9: Electromagnetic compatibility (EMC) - Coupling attenuation of screened balanced cables, triaxial method
63DS DS/EN ISO 14175-20082008-04-11Danish, EnglishWelding consumables - Gases and gas mixtures for fusion welding and allied processes
64DS DS/EN 15388-20082008-04-11EnglishAgglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops
65DS DS/IEC CISPR/TR 16-4-4-20082008-04-11EnglishSpecification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of limits for the protection of radio services
66DS DS/EN 55016-1-1/A2-20082008-04-11EnglishSpecification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
67DS DS/EN ISO 15614-3-20082008-04-10EnglishSpecification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons
68DS DS/EN 716-2-20082008-04-10EnglishFurniture - Childrens cots and folding cots for domestic use - Part 2: Test methods
69DS DS/EN 13971-20082008-04-10EnglishCarbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
70DS DS/EN ISO 23328-1-20082008-04-10EnglishBreathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance
71DS DS/EN ISO 16266-20082008-04-10EnglishWater quality - Detection and enumeration of Pseudomonas aeruginosa - Method by membrane filtration
72DS DS/EN 15308-20082008-04-10EnglishCharacterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by using capillary gas chromatography with electron capture or mass spectrometric detection
73DS DS/EN 12945-20082008-04-10EnglishLiming materials - Determination of neutralizing value - Titrimetric methods
74DS DS/EN 12662-20082008-04-10EnglishLiquid petroleum products - Determination of contamination in middle distillates
75DS DS/EN 13108-5/AC-20082008-04-10EnglishBituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt
76DS DS/EN 13108-7/AC-20082008-04-10EnglishBituminous mixtures - Material specifications - Part 7: Porous Asphalt
77DS DS/EN 13108-6/AC-20082008-04-10EnglishBituminous mixtures - Material specifications - Part 6: Mastic Asphalt
78DS DS/EN 15549-20082008-04-10EnglishAir quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
79DS DS/EN 13242 + A1-20082008-04-10EnglishAggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction
80DS DS/EN ISO 11731-2-20082008-04-10EnglishWater quality - Detection and enumeration of Legionella - Part 2: Direct membrane filtration method for waters with low bacterial counts
81DS DS/ISO 5667-20-20082008-04-10EnglishWater quality - Sampling - Part 20: Guidance on the use of sampling data for decision making - Compliance with thresholds and classification systems
82DS DS/EN ISO 22829-20082008-04-10EnglishResistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency
83DS DS/EN 13108-1/AC-20082008-04-10EnglishBituminous mixtures - Material specifications - Part 1: Asphalt Concrete
84DS DS/EN ISO 17852-20082008-04-10EnglishWater quality - Determination of mercury - Method using atomic fluorescence spectrometry
85DS DS/EN 13108-3/AC-20082008-04-10EnglishBituminous mixtures - Material specifications - Part 3: Soft Asphalt
86DS DS/EN 13108-2/AC-20082008-04-10EnglishBituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers
87DS DS/EN 13108-4/AC-20082008-04-10EnglishBituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
88DS DS/EN 10253-4-20082008-04-09EnglishButt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
89DS DS/EN 755-1-20082008-04-09EnglishAluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery
90DS DS/ISO 19932-2-20082008-04-09EnglishEquipment for crop protection - Knapsack sprayers - Part 2: Performance limits
91DS DS/EN 61217/A2-20082008-04-09EnglishRadiotherapy equipment - Coordinates, movements and scales
92DS DS/EN 14591-4/AC-20082008-04-09EnglishExplosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers
93DS DS/EN 14398-2 + A2-20082008-04-09EnglishCryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
94DS DS/EN 12385-2 + A1-20082008-04-09EnglishSteel wire ropes - Safety - Part 2: Definitions, designation and classification
95DS DS/EN 12385-4 + A1-20082008-04-09EnglishSteel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications
96DS DS/EN 12385-10 + A1-20082008-04-09EnglishSteel wire ropes - Safety - Part 10: Spiral ropes for general structural applications
97DS DS/EN 61158-2 + cd-rom-20082008-04-09EnglishIndustrial communication networks - Fieldbus specifications -- Part 2: Physical layer specification and service definition
98DS DS/EN 10302-20082008-04-09EnglishCreep resisting steels, nickel and cobalt alloys
99DS DS/EN ISO 1248-20082008-04-09EnglishIron oxide pigments - Specifications and methods of test
100DS DS/ISO/IEC 23000-3 CD-rom-20082008-04-09EnglishInformation technology - Multimedia application format (MPEG-A) - Part 3: MPEG photo player application format
101DS DS/EN 342/AC-20082008-04-09EnglishProtective clothing - Ensembles and garments for protection against cold
102DS DS/ISO/IEC TR 23000-1-20082008-04-09EnglishInformation technology - Multimedia application format (MPEG-A) - Part 1: Purpose for multimedia application formats
103DS DS/EN 12385-3 + A1-20082008-04-09EnglishSteel wire ropes - Safety - Part 3: Information for use and maintenance
104DS DS/EN 755-2-20082008-04-09EnglishAluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 2: Mechanical properties
105DS DS/EN 60584-3-20082008-04-09EnglishThermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
106DS DS/EN 62135-2-20082008-04-08EnglishResistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
107DS DS/EN 60901/A4-20082008-04-07EnglishSingle-capped fluorescent lamps - Performance specifications
108DS DS/EN 61228-20082008-04-07EnglishFluorescent ultraviolet lamps used for tanning - Measurement and specification method
109DS DS/EN 50242-20082008-04-07EnglishElectric dishwashers for household use - Methods for measuring the performance
110DS DS/EN 12899-5-20082008-04-07EnglishFixed, vertical road traffic signs - Part 5: Initial type testing
111DS DS/EN 12899-4-20082008-04-07EnglishFixed, vertical road traffic signs - Part 4: Factory production control
112DS DS/EN 12899-3-20082008-04-07EnglishFixed, vertical road traffic signs - Part 3: Delineator posts and retroreflectors
113DS DS/EN 61753-021-2-20082008-04-07EnglishFibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment
114DS DS/EN 12899-1-20082008-04-07EnglishFixed, vertical road traffic signs - Part 1: Fixed signs
115DS DS/EN 12899-2-20082008-04-07EnglishFixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
116DS DS/EN 15505-20082008-04-03EnglishFoodstuffs - Determination of trace elements - Determination of sodium and magnesium by flame atomic absorption spectrometry (AAS) after microwave digestion
117DS DS/EN 15517-20082008-04-03EnglishFoodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
118DS DS 10015-20082008-04-03DanishCompetence management systems - Requirements
119DS DS/EN 1439-20082008-04-03EnglishLPG equipment and accessories - Procedure for checking LPG cylinders before, during and after filling
120DS DS/EN 1440-20082008-04-03EnglishLPG equipment and accessories - Periodic inspection of transportable refillable LPG cylinders
121DS DS/ISO/TS 21872-1/Corr. 1-20082008-04-03EnglishMicrobiology of food and animal feeding stuffs - Horizontal method for the detection of potentially enteropathogenic Vibrio spp. - Part 1: Detection of Vibrio parahaemolyticus and Vibrio cholerae
122DS DS/EN ISO 9241-410-20082008-04-03EnglishErgonomics of human-system interaction - Part 410: Design criteria for physical input devices
123DS DS/EN 13035-2-20082008-04-02EnglishMachines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 2: Storage, handling and transportation equipment outside the factory
124DS DS/EN 13035-1-20082008-04-02EnglishMachines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 1: Storage, handling and transportation equipment inside the factory
125DS DS/EN 15372-20082008-04-02Danish, EnglishFurniture - Strength, durability and safety - Requirements for non-domestic tables
126DS DS/EN 15528-20082008-04-02EnglishRailway applications - Line categories for managing the interface between load limits of vehicles and infrastructure
127DS DS/EN 140101-806-20082008-04-01EnglishDetail Specification: Fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads
128DS DS/EN ISO 26845-20082008-04-01EnglishChemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
129DS DS/EN 140101-20082008-04-01EnglishBlank Detail Specification: Fixed low power film resistors
130DS DS/EN 2398-20082008-03-31EnglishAerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm >= 900 MPa - Bars for machined bolts - D <= 25 mm
131DS DS/EN 4396-20082008-03-31EnglishAerospace series - Shaft-nuts, self-locking, in heat resisting steel FE-PA92HT (A286), silver plated
132DS DS/EN 4355-20082008-03-31EnglishAerospace series - Six lobe recess - Drivers, socket
133DS DS/EN 2898-20082008-03-31EnglishAerospace series - Corrosion and heat resisting steel rivets - Technical specification
134DS DS/EN 60352-5-20082008-03-31EnglishSolderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
135DS DS/EN 61162-1-20082008-03-31EnglishMaritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners
136DS DS/EN 2786-20082008-03-31EnglishAerospace series - Electrolytic silver plating of fasteners
137DS DS/EN 2478-20082008-03-31EnglishAerospace series - Steel FE-PL2107 (30NiCrMo16) - 1 220 MPa <= Rm <= 1 370 MPa - Bars - De <= 40 mm
138DS DS/EN 2480-20082008-03-31EnglishAerospace series - Steel FE-PL2108 (36NiCrMo16) - 1 250 MPa <= Rm <= 1 400 MPa - Bars - De <= 75 mm
139DS DS/EN 2941-20082008-03-31EnglishAerospace series - Nickel alloy rivets - Technical specification
140DS DS/EN 3658-20082008-03-31EnglishAerospace series - Tube bend radii, for engine application - Design standard
141DS DS/EN 4302-20082008-03-31EnglishAerospace series - Open ring insert tool, square drive
142DS DS/EN 4075-20082008-03-31EnglishAerospace series - Screws, pan head, offset cruciform recess, threaded to head, in corrosion resisting steel, passivated - Classification: 490 MPa (at ambient temperature) / 425 °C
143DS DS/EN 3781-20082008-03-31EnglishAerospace series - Grooves for spiral wound retaining rings - Design standard
144DS DS/EN 15373-20082008-03-26Danish, EnglishFurniture - Strength, durability and safety - Requirements for non-domestic seating
145DS DS/IEC/TR 62513-20082008-03-26EnglishSafety of machinery - Guidelines for the use of communication systems in safety-related applications
146DS DS/EN 62282-3-3-20082008-03-25EnglishFuel cell technologies - Part 3-3: Stationary fuel cell power systems - Installation
147DS DS/EN 62282-6-200-20082008-03-25EnglishFuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
148DS DS/EN 659 + A1-20082008-03-17EnglishProtective gloves for firefighters
149DS DS/EN 923 + A1-20082008-03-17EnglishAdhesives - Terms and definitions
150DS DS/CEN/TS 839-20082008-03-17EnglishWood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment
151DS DS/EN 1756-1 + A1-20082008-03-17EnglishTail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods
152DS DS/ISO/IEC 15457-3-20082008-03-14EnglishIdentification cards - Thin flexible cards - Part 3: Test methods
153DS DS/ISO/IEC 7811-8-20082008-03-14EnglishIdentification cards - Recording technique - Part 8: Magnetic stripe - Coercivity of 51,7 kA/m (650 Oe)
154DS DS/ISO/IEC 15457-1-20082008-03-14EnglishIdentification cards - Thin flexible cards - Part 1: Physical characteristics
155DS DS/ISO/IEC 23001-1/Amd. 2-20082008-03-14EnglishInformation technology - MPEG systems technologies - Part 1: Binary MPEG format for XML - Amendment 2: Conservation of prefixes and extensions on encoding of wild cards
156DS DS/ISO/IEC 13818-1/Corr. 1-20082008-03-14EnglishInformation technology - Generic coding of moving pictures and associated audio information: Systems
157DS DS/ISO/IEC 21000-8 CD-rom-20082008-03-14EnglishInformation technology - Multimedia framework (MPEG-21) - Part 8: Reference software
158DS DS/EN 60312-20082008-03-13EnglishVacuum cleaners for household use - Methods of measuring the performance
159DS DS/EN 50425-20082008-03-13EnglishSwitches for household and similar fixed electrical installations - Collateral standard - Firemans switches for exterior and interior signs and luminaires
160DS DS/EN 60598-2-8/A2-20082008-03-13EnglishLuminaires - Part 2-8: Particular requirements - Handlamps
161DS DS/EN 15285-20082008-03-13EnglishAgglomerated stone - Modular tiles for flooring and stairs (internal and external)
162DS DS/EN 14886-20082008-03-12EnglishPlastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements
163DS DS/EN 60061-4/A10 (elektronisk)-20082008-03-12English, FrenchLamp caps and holders together with gauges for the control of interchangeability and safety - Part 4: Guidelines and general information
164DS DS-håndbog 161-20082008-03-12DanishThe ABC of movers
165DS DS/EN 60255-22-1-20082008-03-12EnglishMeasuring relays and protection equipment - Part 22-1: Electrical disturbance tests - 1 MHz burst immunity tests
166DS DS/EN ISO 7326-20082008-03-12EnglishRubber and plastics hoses - Assessment of ozone resistance under static conditions
167DS DS/EN 60061-2/A34 (elektronisk)-20082008-03-12English, FrenchLamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
168DS DS/EN 60061-3/A36 (elektronisk)-20082008-03-12English, FrenchLamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
169DS DS/EN 60061-1/A37 (elektronisk)-20082008-03-12English, FrenchLamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
170DS DS/EN 14765 + A1-20082008-03-12EnglishBicycles for young children - Safety requirements and test methods
171DS DS/ISO/IEC 23001-2 CD-rom-20082008-03-11EnglishInformation technology - MPEG systems technologies - Part 2: Fragment request units
172DS DS/EN 443-20082008-03-11EnglishHelmets for fire fighting in buildings and other structures
173DS DS/EN 15425-20082008-03-11EnglishAdhesives - One component polyurethane for load bearing timber structures - Classification and performance requirements
174DS DS/EN 1903-20082008-03-11EnglishAdhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
175DS DS/EN 61753-083-2-20082008-03-07EnglishFibre optic interconnecting devices and passive components performance standard -- Part 083-2: Non-connectorised single-mode fibre optic C-band/L-band WDM devices for category C - Controlled environment
176DS DS/ISO/IEC 13818-2/Corr. 1-20082008-03-07EnglishInformation technology - Generic coding of moving pictures and associated audio information: Video
177DS DS/ISO/IEC 13818-2/Amd. 1-20082008-03-07EnglishInformation technology - Generic coding of moving pictures and associated audio information: Video
178DS DS/EN 61753-084-2-20082008-03-07EnglishFibre optic interconnecting devices and passive components performance standard - Part 084-2: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Controlled environment
179DS DS/EN 50117-2-1/A1-20082008-03-07EnglishCoaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
180DS DS/ISO/IEC 23004-7-20082008-03-07EnglishInformation technology - Multimedia Middleware - Part 7: System integrity management
181DS DS/ISO/IEC 23003-1/Corr. 1-20082008-03-07EnglishInformation technology - MPEG audio technologies - Part 1: MPEG Surround
182DS DS/EN 60974-2-20082008-03-07EnglishArc welding equipment - Part 2: Liquid cooling systems
183DS DS/ISO/IEC 23004-5-20082008-03-07EnglishInformation technology - Multimedia Middleware - Part 5: Component download
184DS DS/EN 60974-5-20082008-03-07EnglishArc welding equipment - Part 5: Wire feeders
185DS DS/ISO/IEC 23000-2 CD-rom-20082008-03-07EnglishInformation technology - Multimedia application format (MPEG-A) - Part 2: MPEG music player application format
186DS DS/ISO/IEC 23004-6-20082008-03-07EnglishInformation technology - Multimedia Middleware - Part 6: Fault management
187DS DS/ISO/IEC 23001-5-20082008-03-07EnglishInformation technology - MPEG systems technologies - Part 5: Bitstream Syntax Description Language (BSDL)
188DS DS/EN 50445-20082008-03-07EnglishProduct family standard to demonstrate compliance of equipment for resistance welding, arc welding and allied processes with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)
189DS DS/ISO/IEC 21000-15/Corr. 1-20082008-03-07EnglishInformation technology - Multimedia framework (MPEG-21) - Part 15: Event Reporting
190DS DS/EN 50377-11-1-20082008-03-07EnglishConnector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
191DS DS/EN 50117-2-5/A1-20082008-03-07EnglishCoaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 3 000 MHz
192DS DS/EN 50117-2-2/A1-20082008-03-07EnglishCoaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution networks - Outdoor drop cables for systems operating at 5 MHz - 1 000 MHz
193DS DS/EN 50444-20082008-03-07EnglishBasic standard for the evaluation of human exposure to electromagnetic fields from equipment for arc welding and allied processes
194DS DS/EN 50117-2-3/A1-20082008-03-07EnglishCoaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution networks - Distribution and trunk cables for systems operating at 5 MHz - 1 000 MHz
195DS DS/EN 50117-2-4/A1-20082008-03-07EnglishCoaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz
196DS DS/EN 61000-4-3/A1-20082008-03-06EnglishElectromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
197DS DS/IEC 61196-1-318-20082008-03-06EnglishCoaxial communication cables - Part 1-318: Mechanical test methods - Heat performance tests
198DS DS/IEC 61196-1-325-20082008-03-06EnglishCoaxial communication cables - Part 1-325: Mechanical test methods - Aeolian vibration
199DS DS/IEC 61196-1-106-20082008-03-06EnglishCoaxial communication cables - Part 1-106: Electrical test methods - Test for withstand voltage of cable sheath
200DS DS/IEC 61196-1-205-20082008-03-06EnglishCoaxial communication cables - Part 1-205: Environmental test methods - Resistance to solvents and contaminating fluids
201DS DS/CWA 15778-20082008-03-05EnglishDocument Processing for Accessibility
202DS DS/EN ISO 13366-1-20082008-03-05EnglishMilk - Enumeration of somatic cells - Part 1: Microscopic method (Reference method)
203DS DS/EN ISO 9994/A1-20082008-03-05EnglishLighters - Safety specification - Amendment 1: Clarification of structural requirements
204DS DS/EN 15445-20082008-03-04EnglishFugitive and diffuse emissions of common concern to industry sectors - Qualification of fugitive dust sources by Reverse Dispersion Modelling
205DS DS/EN 12764 + A1-20082008-03-04EnglishSanitary appliances - Specification for whirlpool baths
206DS DS/EN 15446-20082008-03-04EnglishFugitive and diffuse emissions of common concern to industry sectors - Measurement of fugitive emission of vapours generating from equipment and piping leaks
207DS DS/EN 13126-15-20082008-03-04EnglishBuilding hardware - Requirements and test methods for windows and doors height windows - Part 15: Rollers for horizontal sliding and sliding folding windows and doors
208DS DS/EN 1036-1-20082008-03-04EnglishGlass in building - Mirrors from silver-coated float glass for internal use - Part 1: Definitions, requirements and test methods
209DS DS/EN 15096-20082008-03-04EnglishDevices to prevent pollution by backflow of potable water - Hose Union anti-vacuum valves - DN 15 to DN 25 inclusive Family H, type B and type D - General technical specification
210DS DS/EN 1036-2-20082008-03-04EnglishGlass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard
211DS DS/EN 14428 + A1-20082008-03-04EnglishShower enclosures - Functional requirements and test methods
212DS DS/EN 13126-16-20082008-03-04EnglishBuilding hardware - Requirements and test methods for windows and doors height windows - Part 16: Hardware for Lift&Slide windows and doors
213DS DS/EN 179-20082008-03-04EnglishBuilding hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes - Requirements and test methods
214DS DS/EN 13126-17-20082008-03-04EnglishBuilding hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors
215DS DS/EN 13443-1 + A1-20082008-03-04EnglishWater conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing
216DS DS/EN 15664-1-20082008-03-04EnglishInfluence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation
217DS DS/ISO/TR 25417-20082008-03-04English, RussianAcoustics - Definitions of basic quantities and terms
218DS DS/EN 1124-2-20082008-03-04EnglishPipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S; dimensions
219DS DS/EN 1125-20082008-03-04EnglishBuilding hardware - Panic exit devices operated by a horizontal bar, for use on escape routes - Requirements and test methods
220DS DS/EN 15091/AC-20082008-03-04EnglishSanitary tapware - Electronic opening and closing sanitary tapware
221DS DS/EN 1886-20082008-03-04EnglishVentilation for buildings - Air handling units - Mechanical performance
222DS DS/SBC 2426-20082008-03-03DanishSpecific Rules for Certification of production of concrete
223DS DS/SBC T1-20082008-03-03DanishSpecific Rules for Certification of T1-battens
224DS DS/SBC 14250-20082008-03-03DanishSpecific Rules for Certification of trussed rafters etc
225DS DS/EN 50289-4-4-20082008-02-29EnglishCommunication cables - Specifications for test methods - Part 4-4: Environmental test methods - Resistance to solvents and contaminating fluids
226DS DS/EN 50289-4-5-20082008-02-29EnglishCommunication cables - Specifications for test methods - Part 4-5: Environmental test methods - Climatic sequence
227DS DS/IEC 61753-062-6-20082008-02-29EnglishFibre optic interconnecting devices and passive components performance standard -- Part 062-6: Non-connectorized single-mode fibre optic pigtailed isolators for category O - Uncontrolled environment and sequential test
228DS DS/EN 50289-4-7-20082008-02-29EnglishCommunication cables - Specifications for test methods - Part 4-7: Environmental test methods - Damp heat, steady state
229DS DS/EN 61274-1-20082008-02-29EnglishAdaptors for fibre optic connectors - Part 1: Generic specification
230DS DS/EN 61753-021-6-20082008-02-29EnglishFibre optic interconnecting devices and passive components performance standard - Part 021-6: Grade B/2 single-mode fibre optic connectors for category O - Uncontrolled environment
231DS DS/EN 62311-20082008-02-29EnglishAssessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)
232DS DS/EN 61290-10-2-20082008-02-29EnglishOptical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
233DS DS/ISO/IEC 24740-20082008-02-29EnglishInformation technology - Responsive Link (RL)
234DS DS/EN 61310-2-20082008-02-28EnglishSafety of machinery - Indication, marking and actuation - Part 2: Requirements for marking
235DS DS/EN 61310-3-20082008-02-28EnglishSafety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
236DS DS/EN 61310-1-20082008-02-28EnglishSafety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
237DS DS/EN ISO 15614-1/A1-20082008-02-28EnglishSpecification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
238DS DS/ISO 7176-14-20082008-02-28EnglishWheelchairs - Part 14: Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods
239DS DS/EN 50214/Corr. 1-20082008-02-27EnglishFlat polyvinyl chloride sheathed flexible cables
240DS DS/EN 363-20082008-02-27EnglishPersonal fall protection equipment - Personal fall protection systems
241DS DS/EN ISO 3251-20082008-02-27EnglishPaints, varnishes and plastics - Determination of non-volatile-matter content
242DS DS/EN 877/A1/AC-20082008-02-27EnglishCast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance
243DS DS/SBC 483-20082008-02-26DanishSpecific Rules for Certification of visual strength grading of timber
244DS DS/SBC 14081-1-20082008-02-26DanishSpecific Rules for Certification of visual strength grading of timber
245DS DS/SBC 13084-20082008-02-26DanishSpecific Rules for Certification of steel coils for reinforcement
246DS DS/SBC 13084 E-20082008-02-26DanishSpecific Rules for Certification of steel coils for reinforcement (HARDCOPY IS AVAILABLE FOR DKK 50,00)
247DS DS/EN ISO 15138-20082008-02-26EnglishPetroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning
248DS DS/EN 12440-20082008-02-26EnglishNatural stone - Denomination criteria
249DS DS/EN ISO 6327-20082008-02-26EnglishGas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers
250DS DS/SBC 13083-20082008-02-26DanishSpecific Rules for Certification of welding of reinforcing steel
251DS DS/EN ISO 17078-2-20082008-02-26EnglishPetroleum and natural gas industries - Drilling and production equipment - Part 2: Flow-control devices for side-pocket mandrels
252DS DS/SBC 13082-20082008-02-26DanishSpecific Rules for Certification of steel for reinforcement - Machine welded fabric
253DS DS/SBC 13082 E-20082008-02-26EnglishSpecific Rules for Certification of steel for reinforcement - Machine welded fabric (HARDCOPY IS AVAILABLE FOR DKK 50,00)
254DS DS/SBC 13080-20082008-02-26DanishSpecific Rules for Certification of steel bars for re-inforcement
255DS DS/SBC 13080 E-20082008-02-26EnglishSpecific Rules for Certification of steel bars for re-inforcement (HARDCOPY IS AVAILABLE FOR DKK 50,00)
256DS DS/SBC 12620-20082008-02-26DanishSpecific Rules for Certification of aggregates
257DS DS/SBC 10080-20082008-02-26DanishSpecific Rules for Certification of reinforcement (HARDCOPY IS AVAILABLE FOR DKK 50,00)
258DS DS/SBC 10080 E-20082008-02-26EnglishSpecific Rules for Certification of reinforcement (HARDCOPY IS AVAILABLE FOR DKK 50,00)
259DS DS/SBC 998-x-20082008-02-26DanishSpecific Rules for Certification of mortar
260DS DS/SBC 385-20082008-02-26DanishSpecific Rules for Certification of finger jointed structural timber
261DS DS/EN ISO 4048-20082008-02-26EnglishLeather - Chemical tests - Determination of matter soluble in dichloromethane and free fatty acid content
262DS DS/EN ISO 1307-20082008-02-26EnglishRubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
263DS DS/EN ISO 10438-4 CD-rom-20082008-02-26EnglishPetroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 4: Self-acting gas seal support systems
264DS DS/EN ISO 4045-20082008-02-26EnglishLeather - Chemical tests - Determination of pH
265DS DS/EN ISO 10062-20082008-02-26EnglishCorrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
266DS DS/EN ISO 20182-20082008-02-26EnglishRefractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns
267DS DS/EN ISO 15403-1-20082008-02-26EnglishNatural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
268DS DS/EN ISO 3630-1-20082008-02-26EnglishDentistry - Root-canal instruments - Part 1: General requirements and test methods
269DS DS/EN 140100-20082008-02-26EnglishSectional Specification: Fixed low power film resistors
270DS DS/EN/ISO 10440-1 cd-rom-20082008-02-26EnglishPetroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors
271DS DS/EN ISO 1798-20082008-02-26EnglishFlexible cellular polymeric materials - Determination of tensile strength and elongation at break
272DS DS/EN ISO 8308-20082008-02-26EnglishRubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls
273DS DS/EN ISO 21078-1-20082008-02-26EnglishDetermination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes
274DS DS/EN ISO 62-20082008-02-26EnglishPlastics - Determination of water absorption
275DS DS/EN ISO 18332-20082008-02-26EnglishMetallic and other inorganic coatings - Definitions and conventions concerning porosity
276DS DS/EN ISO 10438-2 CD-rom-20082008-02-26EnglishPetroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 2: Special-purpose oil systems
277DS DS/EN ISO 5774-20082008-02-26EnglishPlastics hoses - Textile-reinforced types for compressed-air applications - Specification
278DS DS/EN ISO 10438-3 CD-rom-20082008-02-26EnglishPetroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 3: General-purpose oil systems
279DS DS/EN ISO 10438-1 CD-rom-20082008-02-26EnglishPetroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements
280DS DS/EN ISO 4044-20082008-02-26EnglishLeather - Chemical tests - Preparation of chemical test samples
281DS DS/EN ISO 7233-20082008-02-26EnglishRubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
282DS DS/EN 50131-6-20082008-02-25EnglishAlarm systems - Intrusion and hold-up systems - Part 6: Power supplies
283DS DS/EN 61966-2-5-20082008-02-25EnglishMultimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - opRGB
284DS DS/IEC 62539-20082008-02-25EnglishGuide for the statistical analysis of electrical insulation breakdown data
285DS DS/EN 50131-2-2-20082008-02-25EnglishAlarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors
286DS DS/EN 50131-2-4-20082008-02-25EnglishAlarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors
287DS DS/EN 50482-20082008-02-25EnglishInstrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV
288DS DS/EN 60641-1-20082008-02-25EnglishSpecification for pressboard and presspaper for electrical purposes - Part 1: Definitions and general requirements
289DS DS/CLC/TR 50456-20082008-02-25EnglishAlarm systems - Guidelines to achieving compliance with EC directives for equipment of alarm systems
290DS DS/CEN/TR 15645-1-20082008-02-22EnglishPaper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
291DS DS/CEN/TR 15645-3-20082008-02-22EnglishPaper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food
292DS DS/CEN/TR 15645-2-20082008-02-22EnglishPaper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
293DS DS/EN 50410-20082008-02-22EnglishHousehold and similar electrical appliances - Safety - Particular requirements for decorative robots
294DS DS/EN 15333-1-20082008-02-22EnglishRespiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus
295DS DS/EN 13274-7-20082008-02-22EnglishRespiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration
296DS DS/EN 15603-20082008-02-20EnglishEnergy performance of buildings - Overall energy use and definition of energy ratings
297DS DS/ISO/IEC 23001-1/Corr. 1-20082008-02-20EnglishInformation technology - MPEG systems technologies - Part 1: Binary MPEG format for XML
298DS DS/EN 15330-2-20082008-02-20EnglishSurfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 2: Specification for needle-punched surfaces
299DS DS/ISO 17372-20082008-02-20EnglishAnimal feeding stuffs - Determination of zearalenone by immunoaffinity column chromatography and high performance liquid chromatography
300DS DS/EN 752-20082008-02-20EnglishDrain and sewer systems outside buildings
301DS DS/EN 12566-4-20082008-02-20EnglishSmall wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits
302DS DS/EN 61800-5-2-20082008-02-19EnglishAdjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional
303DS DS/EN 62366-20082008-02-19EnglishMedical devices - Application of usability engineering to medical devices
304DS DS-Håndbog 113 Bind 1+2-20082008-02-18Danish, EnglishTechnical product documentation - Standards for construction drawing
305DS DS/EN 415-8-20082008-02-14EnglishSafety of packaging machines - Part 8: Strapping machines
306DS DS/EN 15431-20082008-02-14EnglishWinter and road service area maintenance equipments - Power system and related controls - Interchangeability and performance requirements
307DS DS/EN 15432-20082008-02-14EnglishWinter and road service area maintenance equipments - Front-mounted equipments - Interchangeability
308DS DS/ISO/IEC Guide 99-20082008-02-14English, FrenchInternational vocabulary of metrology - Basic and general concepts and associated terms (VIM)
309DS DS/EN 1149-5-20082008-02-14EnglishProtective clothing - Electrostatic properties - Part 5: Material performance and design requirements
310DS DS/EN 736-3-20082008-02-14EnglishValves - Terminology - Part 3: Definition of terms
311DS DS/CEN/TR 15623-20082008-02-14EnglishFood processing machinery - Route map - Materials for food area
312DS DS/EN 1442 + A1-20082008-02-14EnglishLPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction
313DS DS/EN 558-20082008-02-14EnglishIndustrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
314DS DS/EN 1062-3-20082008-02-14EnglishPaints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 3: Determination of liquid water permeability
315DS DS/EN 14387 + A1-20082008-02-14EnglishRespiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
316DS DS/EN 15530-20082008-02-14EnglishAluminium and aluminium alloys - Environmental aspects of aluminium products - General guidelines for their inclusion in standards
317DS DS/EN 12516-4-20082008-02-14EnglishIndustrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel
318DS DS/EN ISO 5077-20082008-02-13EnglishTextiles - Determination of dimensional change in washing and drying
319DS DS/EN ISO 14683-20082008-02-13EnglishThermal bridges in building construction - Linear thermal transmittance - Simplified methods and default values
320DS DS-Håndbog 124-20082008-02-13Danish, EnglishCorrosion protection of steel structures by protective paint systems
321DS DS/EN ISO 6946-20082008-02-13EnglishBuilding components and building elements - Thermal resistance and thermal transmittance - Calculation method
322DS DS/EN ISO 10211-20082008-02-13EnglishThermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations
323DS DS/EN 1999-1-2-20082008-02-12Danish, EnglishEurocode 9 - Design of aluminium structures - Part 1-2: Structural fire design
324DS DS/EN 15275/ZA-20082008-02-11Danish, EnglishStructural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures
325DS DS/EN 15274/ZA-20082008-02-11Danish, EnglishGeneral purpose adhesives for structural assembly - Requirements and test methods
326DS DS/EN ISO 15189-20082008-02-11Danish, EnglishMedical laboratories - Particular requirements for quality and competence
327DS DS/ISO/TS 16952-1-20082008-02-11EnglishTechnical product documentation - Reference designation system - Part 1: General application rules
328DS DS-håndbog 116.1-20082008-02-08Danish, EnglishSafety of machinery - Part 1: Basic concepts and principles
329DS DS/EN 934-1-20082008-02-08EnglishAdmixtures for concrete, mortar and grout - Part 1: Common requirements
330DS DS/HD 631.2 S1-20082008-02-07EnglishElectric cables - Accessories - Material characterisation - Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications
331DS DS/HD 631.1 S2-20082008-02-07EnglishElectric cables - Accessories - Material characterisation - Part 1: Fingerprinting and type tests for resinous compounds
332DS DS/EN 61138-20082008-02-07EnglishCables for portable earthing and short-circuiting equipment
333DS DS/EN 60947-5-2-20082008-02-05EnglishLow-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
334DS DS/IEC/PAS 62515-20082008-02-05EnglishRequirements concerning the interoperability between electromechanical and electrical applications in CAx-systems
335DS DS/EN 15496-20082008-02-05EnglishCycles - Requirements and test methods for cycle locks
336DS DS/EN 3-8/AC-20082008-02-03EnglishPortable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
337DS DS/ISO/IEC 13818-2/Corr. 2-20082008-02-03EnglishInformation technology - Generic coding of moving pictures and associated audio information: Video
338DS DS/ISO/IEC 13818-4/Corr. 1-20082008-02-03EnglishInformation technology - Generic coding of moving pictures and associated audio information - Part 4: Conformance testing
339DS DS/EN 934-5/ZA-20082008-02-01Danish, EnglishAdmixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling
340DS DS/EN 62264-2-20082008-02-01EnglishEnterprise-control system integration - Part 2: Object model attributes
341DS DS/EN 1/A1/ZA-20082008-02-01Danish, EnglishFlued oil stoves with vaporizing burners
342DS DS/EN 60601-1/Corr. 2-20082008-02-01EnglishMedical electrical equipment - Part 1: General requirements for basic safety and essential performance
343DS DS/EN ISO 19440-20082008-02-01EnglishEnterprise integration - Constructs for enterprise modelling
344DS DS/EN ISO 19439/AC-20082008-02-01EnglishEnterprise integration - Framework for enterprise modelling
345DS DS/EN 10340/ZA-20082008-02-01Danish, EnglishSteel castings for structural uses
346DS DS/EN 12004/ZA-20082008-02-01Danish, EnglishAdhesives for tiles - Requirements, evaluation of conformity, classification and designation
347DS DS/EN 15266/ZA-20082008-02-01Danish, EnglishStainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar
348DS DS/EN 62264-1-20082008-02-01EnglishEnterprise-control system integration - Part 1: Models and terminology
349DS DS/EN 10255 + A1/ZA-20082008-02-01Danish, EnglishNon-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
350DS DS/EN 10272-20082008-02-01Danish, EnglishStainless steel bars for pressure purposes
351DS DS/EN 14411/ZA-20082008-02-01Danish, EnglishCeramic tiles - Definitions, classification, characteristics and marking
352DS DS/EN 60976-20082008-02-01EnglishMedical electrical equipment - Medical electron accelerators - Functional performance characteristics
353DS DS/EN 14800/ZA-20082008-02-01Danish, EnglishCorrugated safety metal hose assemblies for the connection domestic appliance using gaseous fuels
354DS DS/EN 61157-20082008-02-01EnglishStandard means for the reporting of the acoustic output of medical diagnostic ultrasonic equipment
355DS DS/ISO/IEC TR 11172-5/Corr. 1-20082008-01-30EnglishInformation technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 5: Software simulation
356DS DS/EN 60706-5-20082008-01-29EnglishMaintainability of equipment - Part 5: Testability and diagnostic testing
357DS DS/EN 60974-3-20082008-01-28EnglishArc welding equipment - Part 3: Arc striking and stabilizing devices
358DS DS/EN 60974-10-20082008-01-28EnglishArc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
359DS DS/EN ISO 11079-20082008-01-28EnglishErgonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects
360DS DS/CWA 15579-20082008-01-25EnglishE-invoices and digital signatures
361DS DS/CWA 15627-20082008-01-25EnglishSmall Punch Test Method for Metallic Materials
362DS DS/EN ISO 12127-2-20082008-01-25EnglishClothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders
363DS DS/ISO 16602-20082008-01-25EnglishProtective clothing for protection against chemicals - Classification, labelling and performance requirements
364DS DS/EN 60085-20082008-01-25EnglishElectrical insulation - Thermal evaluation and designation
365DS DS/EN 60079-29-2/Corr. 1-20082008-01-25EnglishExplosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
366DS DS 472 E-20082008-01-24EnglishExternal conditions in Denmark for the design of wind turbines
367DS DS/EN ISO 19128-20082008-01-24EnglishGeographic information - Web map server interface
368DS DS/EN 471 + A1-20082008-01-24Danish, EnglishHigh-visibility warning clothing for professional use - Test methods and requirements
369DS DS/EN 61058-1/A2-20082008-01-23EnglishSwitches for appliances - Part 1: General requirements
370DS DS/ISO 20858-20082008-01-23EnglishShips and marine technology - Maritime port facility security assessments and security plan development
371DS DS/EN 60300-3-4-20082008-01-23EnglishDependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements
372DS DS/EN ISO 21415-2-20082008-01-22EnglishWheat and wheat flour - Gluten content - Part 2: Determination of wet gluten by mechanical means
373DS DS/EN 15567-1-20082008-01-22EnglishSports and recreational facilities - Ropes courses - Part 1: Construction and safety requirements
374DS DS/EN 15567-2-20082008-01-22EnglishSports- and recreational facilities - Ropes courses - Part 2: Operation requirements
375DS DS/EN 3155-071-20082008-01-21EnglishAerospace series - Electrical contacts used in elements of connection - Part 071: Contacts, electrical, female, type A, crimp, class S - Product standard
376DS DS/EN ISO 22442-3-20082008-01-21EnglishMedical devices utilizing animal tissues and their derivatives - Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents
377DS DS/EN 15267-3-20082008-01-21EnglishAir quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources
378DS DS/EN 15416-2-20082008-01-21EnglishAdhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear
379DS DS/EN 2591-225-20082008-01-21EnglishAerospace series - Elements of electrical and optical connection - Test methods - Part 225: RF high potential withstanding voltage
380DS DS/ISO 16000-4-20082008-01-21EnglishIndoor air - Part 4: Determination of formaldehyde - Diffusive sampling method
381DS DS/EN 2591-223-20082008-01-21EnglishAerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact
382DS DS/EN 2591-224-20082008-01-21EnglishAerospace series - Elements of electrical and optical connection - Test methods - Part 224: RF leakage
383DS DS/EN 4629-20082008-01-21EnglishAerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De <= 300 mm
384DS DS/EN 2591-226-20082008-01-21EnglishAerospace series - Elements of electrical and optical connection - Test methods - Part 226: Corona level
385DS DS/EN 4630-20082008-01-21EnglishAerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa
386DS DS/EN 4631-20082008-01-21EnglishAerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa
387DS DS/EN 10213-20082008-01-21EnglishSteel castings for pressure purposes
388DS DS/EN 14814-20082008-01-21EnglishAdhesives for thermoplastic piping systems for fluids under pressure - Specifications
389DS DS/EN ISO 21809-2-20082008-01-21EnglishPetroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Fusion-bonded epoxy coatings
390DS DS/EN 3155-070-20082008-01-21EnglishAerospace series - Electrical contacts used in elements of connection - Part 070: Contacts, electrical, male, type A, crimp, class S - Product standard
391DS DS/EN 4627-20082008-01-21EnglishAerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De <= 150 mm - 1 100 MPa <= Rm <= 1 300 MPa
392DS DS/EN ISO 10424-2-20082008-01-18EnglishPetroleum and natural gas industries - Rotary drilling equipment - Part 2: Threading and gauging of rotary shouldered thread connections
393DS DS/EN 12767-20082008-01-18EnglishPassive safety of support structures for road equipment - Requirements, classification and test methods
394DS DS/EN 14944-3-20082008-01-18EnglishInfluence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products
395DS DS/EN 14707 + A1-20082008-01-18EnglishThermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation
396DS DS/EN ISO 22442-1-20082008-01-18EnglishMedical devices utilizing animal tissues and their derivatives - Part 1: Application of risk management
397DS DS/EN ISO 22442-2-20082008-01-18EnglishMedical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourcing, collection and handling
398DS DS/EN ISO 24598-20082008-01-18EnglishWelding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels - Classification
399DS DS/EN ISO 19902 cd-rom-20082008-01-18EnglishPetroleum and natural gas industries - Fixed steel offshore structures
400DS DS/EN 15219 + A1-20082008-01-18EnglishWater conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing
401DS DS/EN 14637-20082008-01-18EnglishBuilding hardware - Electrically controlled hold-open systems for fire/smoke door assemblies - Requirements, test methods, application and maintenance
402DS DS/CEN/TS 15590-20082008-01-17EnglishSolid recovered fuels - Determination of potential rate of microbial self heating using the real dynamic respiration index
403DS DS/EN 61189-3-20082008-01-17EnglishTest methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
404DS DS/EN 14399-7-20082008-01-17EnglishHigh-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
405DS DS/EN ISO 26082-20082008-01-17EnglishLeather - Physical and mechanical tests - Determination of soiling with rubbing for automotive leather
406DS DS/EN ISO 8307-20082008-01-17EnglishFlexible cellular polymeric materials - Determination of resilience by ball rebound
407DS DS/EN 14399-8-20082008-01-17EnglishHigh-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
408DS DS/EN 50438-20082008-01-16EnglishRequirements for the connection of micro-generators in parallel with public low-voltage distribution networks
409DS DS/ISO/IEC TR 24716-20082008-01-16EnglishInformation technology - Programming languages, their environment and system software interfaces - Native COBOL Syntax for XML Support
410DS DS/ISO/IEC 19794-5/Amd. 1-20082008-01-16EnglishInformation technology - Biometric data interchange formats - Part 5: Face image data - Amendment 1: Conditions for taking photographs for face image data
411DS DS/EN 50411-2-3-20082008-01-16EnglishFibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-3: Sealed inline fibre splice closures Type 1, for category S & A
412DS DS/ISO/IEC TR 15443-3-20082008-01-16EnglishInformation technology - Security techniques - A framework for IT security assurance - Part 3: Analysis of assurance methods
413DS DS/ISO/IEC 24755-20082008-01-16EnglishInformation technology - Screen icons and symbols for personal mobile communication devices
414DS DS/EN 300132-2 V2.2.2-20082008-01-15EnglishEnvironmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc)
415DS DS/EN 50152-2-20082008-01-15EnglishRailway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 2: Single-phase disconnectors, earthing switches and switches with Un above 1 kV
416DS DS/EN 301908-5 V3.2.1-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS) covering essentia
417DS DS/EN 302448 V1.1.1-20082008-01-15EnglishSatellite Earth Stations and Systems (SES); Harmonized EN for tracking Earth Stations on Trains (ESTs) operating in the 14/12 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive
418DS DS/EN 301908-6 V3.2.1-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirem
419DS DS/EN 62282-5-1-20082008-01-15EnglishFuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety
420DS DS/EN 50152-1-20082008-01-15EnglishRailway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 1: Single-phase circuit-breakers with Un above 1 kV
421DS DS/EN 302217-4-1 V1.2.1-20082008-01-15EnglishFixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-1: System-dependent requirements for antennas
422DS DS/EN 302537-1 V1.1.2-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Ultra Low Power Medical Data Service Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Part 1: Technical characteristics and test
423DS DS/EN 302217-4-2 V1.3.1-20082008-01-15EnglishFixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 4-2: Harmonized EN covering essential requirements of Article 3.2 of R&TTE Directive for antennas
424DS DS/EN 302217-2-2 V1.2.3-20082008-01-15EnglishFixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2-2: Harmonized EN covering essential requirements of Article 3.2 of R&TTE Directive for digital systems operating in frequency bands where frequency co-
425DS DS/EN 302536-2 V1.1.1-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 2: Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive
426DS DS/EN 300392-3-5 V1.3.1-20082008-01-15EnglishTerrestrial Trunked Radio (TETRA); Voice plus Data (V+D); Part 3: Interworking at the Inter-System Interface (ISI); Sub-part 5: Additional Network Feature for Mobility Management (ANF-ISIMM)
427DS DS/EN 302537-2 V1.1.2-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Ultra Low Power Medical Data Service Systems operating in the frequency range 401 MHz to 402 MHz and 405 MHz to 406 MHz; Part 2: Harmonized EN covering essential re
428DS DS/EN 300720-2 V1.2.2-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
429DS DS/EN 301908-4 V3.2.1-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essentia
430DS DS/EN 302536-1 V1.1.1-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 315 kHz to 600 kHz; Part 1: Technical characteristics and test methods
431DS DS/EN 301489-9 V1.4.1-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordles
432DS DS/ABP E-20082008-01-15EnglishGeneral Rules for DS Product Certification (ABP) (HARDCOPY IS AVAILABLE FOR DKK 50,00)
433DS DS/EN 300394-1 V3.1.1-20082008-01-15EnglishTerrestrial Trunked Radio (TETRA); Conformance testing specification; Part 1: Radio
434DS DS/EN 60904-9-20082008-01-15EnglishPhotovoltaic devices - Part 9: Solar simulator performance requirements
435DS DS/EN 301489-24 V1.4.4-20082008-01-15EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancil
436DS DS/EN 12193-20082008-01-15EnglishLight and lighting - Sports lighting
437DS DS/OHSAS 18001-20082008-01-14Danish, EnglishOccupational health and safety management systems - Specification
438DS DS/EN 449 + A1-20082008-01-14EnglishSpecification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters)
439DS DS/EN ISO 3826-3-20082008-01-14EnglishPlastics collapsible containers for human blood and blood components - Part 3: Blood bag systems with integrated features
440DS DS/EN 14123-20082008-01-14EnglishFoodstuffs - Determination of aflatoxin B1 and the sum of aflatoxin B1, B2, G1 and G2 in hazelnuts, peanuts, pistachios, figs, and paprika powder - High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cl
441DS DS/ISO/IEC 21000-14 + CD-rom-20082008-01-11EnglishInformation technology - Multimedia framework (MPEG-21) - Part 14: Conformance Testing
442DS DS/CEN/TS 15448/AC-20082008-01-11EnglishPostal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems)
443DS DS/ISO/TR 29901-20082008-01-11EnglishSelected illustrations of full factorial experiments with four factors
444DS DS/ISO/IEC TR 24800-1-20082008-01-11EnglishInformation technology - JPSearch - Part 1: System framework and components
445DS DS/EN 14753-20082008-01-11EnglishSafety of machinery - Safety requirements for machinery and equipment for continuous casting of steel
446DS DS/EN 15067-20082008-01-09EnglishPlastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
447DS DS/EN 1071-6-20082008-01-09EnglishAdvanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test
448DS DS/EN 14814/ZA-20082008-01-09Danish, EnglishAdhesives for thermoplastic piping systems for fluids under pressure - Specifications
449DS DS/EN 993-11-20082008-01-09EnglishMethods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
450DS DS/EN 50436-2-20082008-01-09EnglishAlcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
451DS DS/EN 1845-20082008-01-09EnglishFootwear manufacturing machines - Footwear moulding machines - Safety requirements
452DS DS/EN ISO 4671-20082008-01-09EnglishRubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
453DS DS/EN 3431-20082008-01-08EnglishAerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, silver plated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
454DS DS/EN 15320-20082008-01-08EnglishIdentification card systems - Surface transport applications - Interoperable Public Transport Applications - Framework
455DS DS/EN 3745-705-20082008-01-08EnglishAerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement
456DS DS/EN 4639-102-20082008-01-08EnglishAerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between - 55 °C and 100 °C - Product stand
457DS DS/EN 4639-101-20082008-01-08EnglishAerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between - 65 °C and 125 °C - Product stand
458DS DS/EN 4639-002-20082008-01-08EnglishAerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards
459DS DS/EN 4639-001-20082008-01-08EnglishAerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
460DS DS/EN 15216-20082008-01-08EnglishCharacterization of waste - Determination of total dissolved solids (TDS) in water and eluates
461DS DS/EN 3733-007-20082008-01-08EnglishAerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 µm/280 µm fibre) - Product standard
462DS DS/EN 2591-222-20082008-01-08EnglishAerospace series - Elements of electrical and optical connection - Test methods - Part 222: Insertion Loss (I.L.)
463DS DS/EN 2591-221-20082008-01-08EnglishAerospace series - Elements of electrical and optical connection - Test methods - Part 221: Voltage Standing Wave Ratio (VSWR)
464DS DS/EN 1269/A1-20082008-01-08EnglishTextile floorcoverings - Assessment of impregnations in needled floorcoverings by means of a soiling test
465DS DS/EN 3733-005-20082008-01-08EnglishAerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 °C continuous - Part 005: Receptacle, connector, two hole fixing cable according to EN 4532, product standard
466DS DS/EN 3487-20082008-01-08EnglishAerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Bar for machining - a or D <= 250 mm - 500 MPa <= Rm <= 700 MPa
467DS DS/EN 3240-20082008-01-08EnglishAerospace series - Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), uncoated - Classification: 1 100 MPa (at ambient temperature) / 425 °C
468DS DS/ISO 23893-1-20082008-01-08EnglishWater quality - Biochemical and physiological measurements on fish - Part 1: Sampling of fish, handling and preservation of samples
469DS DS/EN 3301-20082008-01-08EnglishAerospace series - Bolts, T-head, close tolerance medium thread length in heat resisting steel FE-PM1708 (FV535), uncoated - Classification: 1 000 MPa/550 °C
470DS DS/EN 3324-20082008-01-08EnglishAerospace series - Bolts, hexagon head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Unplated
471DS DS/EN 3909-20082008-01-08EnglishAerospace series - Test fluids and test methods for electric components and sub-assemblies
472DS DS/EN 4628-20082008-01-08EnglishAerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De <= 150 mm - 1 100 MPa <= Rm <= 1 300 MPa
473DS DS/EN 3325-20082008-01-08EnglishAerospace series - Bolts, T-head, relieved shank, long thread, in heat resisting steel, FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Unplated
474DS DS/EN 3326-20082008-01-08EnglishAerospace series - Bolts, D-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-PH2601 (INCO 718) - Classification: 1 275 MPa/650 °C, unplated
475DS DS/EN 3302-20082008-01-08EnglishAerospace series - Bolts in heat resisting steel FE-PM1708 (FV535) - Classification: 1 000 MPa/550 °C - Technical specification
476DS DS/EN ISO 14912/AC-20082008-01-07EnglishGas analysis - Conversion of gas mixture composition data
477DS DS/EN 15470-20082008-01-07EnglishLiquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
478DS DS/EN 483/A4-20082008-01-07EnglishGas fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW
479DS DS/EN 15471-20082008-01-07EnglishLiquefied petroleum gases - Determination of dissolved residues - High-temperature gravimetric method
480DS DS/EN 14459-20082008-01-07EnglishControl functions in electronic systems for gas burners and gas burning appliances - Methods for classification and assessment
481DS DS/CEN ISO/TR 24094-20082008-01-07EnglishAnalysis of natural gas - Validation methods for gaseous reference materials
482DS DS/EN 88-2-20082008-01-07EnglishPressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
483DS DS/ISO/IEC 11404-20082008-01-04EnglishInformation technology - General-Purpose Datatypes (GPD)
484DS DS/ISO 22899-1-20082008-01-03EnglishDetermination of the resistance to jet fires of passive fire protection materials - Part 1: General requirements
485DS DS/CEN/TS 15676-20082008-01-03EnglishWood flooring - Slip resistance - Pendulum test
486DS DS/CEN/TS 15680-20082008-01-03EnglishPrefabricated timber stairs - Mechanical test methods
487DS DS/CEN/TS 15679-20082008-01-03EnglishThermal Modified Timber - Definitions and characteristics
488DS DS/EN 60335-2-38/Corr.-20082008-01-02EnglishHousehold and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
489DS DS/EN 60086-4-20082008-01-02EnglishPrimary batteries - Part 4: Safety of lithium batteries
490DS DS/EN 196-7-20082008-01-02EnglishMethods of testing cement - Part 7: Methods of taking and preparing samples of cement
491DS DS/EN 14682-20082008-01-02EnglishSafety of childrens clothing - Cords and drawstrings on childrens clothing - Specifications
492DS DS/EN 15469-20082008-01-02EnglishPetroleum products - Test method for free water in liquefied petroleum gas by visual inspection
493DS DS/EN 50463-20082008-01-02EnglishRailway applications - Energy measurement on board trains
494DS DS-håndbog 111.4-20082008-01-01Danish, EnglishIron and steel - Part 4: Steels for heat treatment
495DS DS/ISO 28001-20072007-12-21EnglishSecurity management systems for the supply chain - Best practices for implementing supply chain security, assessments and plans - Requirements and guidance
496DS DS/ISO 28004-20072007-12-21EnglishSecurity management systems for the supply chain - Guidelines for the implementation of ISO 28000
497DS DS/EN 301 489-23 V1.3.1-20072007-12-21EnglishElectromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 23: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) radio, repeater and ancill
498DS DS/ISO 25861-20072007-12-21EnglishShips and marine technology - Navigation - Daylight signalling lamps
499DS DS/EN 60335-2-58/Corr. 1-20072007-12-21EnglishHousehold and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
500DS DS/EN 60335-2-37/Corr.-20072007-12-21EnglishHousehold and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric deep fat fryers