We offers a broad range of engineering and technical standards, specifications, codes in PDF for personal education purpose with affortable price. Any requirements please contact fdcrw@qq.com.

STANDARD SEARCH->DS STANDARD LIST:

Total count:28870 records, Page:1 |2 |3 |4 |5 |6 |7 |8 |9 |10 |11 |12 |13 |14 |15 |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 |32 |33 |34 |35 |36 |37 |38 |39 |40 |41 |42 |43 |44 |45 |46 |47 |48 |49 |50 |51 |52 |53 |54 |55 |56 |57 |58 |
Posstandard Numberpublication dateLanguageDescription
1DS DS/EN 14702-3-20192019-02-26EnglishCharacterisation of sludges – Settling properties – Part 3: Determination of zone settling velocity (ZSV)
2DS DS/EN IEC 61000-6-2-20192019-02-26EnglishElectromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity standard for industrial environments
3DS DS/ISO 27501-20192019-02-26EnglishThe human-centred organization – Guidance for managers
4DS DS/EN IEC 61000-6-1-20192019-02-26EnglishElectromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity standard for residential, commercial and light-industrial environments
5DS DS/EN IEC 60730-2-14-20192019-02-26EnglishAutomatic electrical controls – Part 2-14: Particular requirements for electric actuators
6DS DS/EN 17181-20192019-02-26EnglishLubricants – Determination of aerobic biological degradation of fully formulated lubricants in an aqueous solution – Test method based on CO2-production
7DS DS/EN 60529/A2/AC-20192019-02-25EnglishDegrees of protection provided by enclosures (IP Code)
8DS DS/EN 17120-20192019-02-25EnglishPhotocatalysis – Water purification – Performance of photocatalytic materials by measurement of phenol degradation
9DS DS/EN 55016-4-2/A2/AC-20192019-02-25EnglishSpecification for radio disturbance and immunity measuring apparatus and methods – Part 4-2: Uncertainties, statistics and limit modelling – Measurement instrumentation uncertainty
10DS DS/ISO 11843-6-20192019-02-25EnglishCapability of detection – Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations
11DS DS/ISO 14033-20192019-02-25EnglishEnvironmental management – Quantitative environmental information – Guidelines and examples
12DS DS/ISO 10704-20192019-02-25EnglishWater quality – Gross alpha and gross beta activity – Test method using thin source deposit
13DS DS/CEN/TS 17249-4-20192019-02-25EnglishIntelligent transport systems – eSafety – Part 4: eCall for UNECE Category T, R, S agricultural/forestry vehicles
14DS DS/CLC IEC/TR 61508-0-20192019-02-25EnglishFunctional safety of electrical/electronic/programmable electronic safety-related systems – Part 0: Functional safety and IEC 61508
15DS DS/ISO 14731-20192019-02-25EnglishWelding coordination – Tasks and responsibilities
16DS DS/EN 61058-1-1/AC-20192019-02-25EnglishSwitches for appliances – Part 1-1: Requirements for mechanical switches
17DS DS/EN 61010-1/A1-20192019-02-25EnglishSafety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements
18DS DS/CLC/TR 62453-51-20-20192019-02-25EnglishField device tool (FDT) interface specification – Part 51-20: Communication implementation for common object model – IEC 61784 CPF 2
19DS DS/CLC/TR 62453-51-31-20192019-02-25EnglishField device tool (FDT) interface specification – Part 51-31: Communication implementation for common object model – IEC 61784 CP 3/1 and CP 3/2
20DS DS/EN 61058-1-2/AC-20192019-02-25EnglishSwitches for appliances – Part 1-2: Requirements for electronic switches
21DS DS/EN 4859-20192019-02-25EnglishAerospace series – Sensor based clamp load determination / high tensile bolts – Technical specification
22DS DS/ISO 20186-1-20192019-02-25EnglishMolecular in vitro diagnostic examinations – Specifications for pre-examination processes for venous whole blood – Part 1: Isolated cellular RNA
23DS DS/CLC/TR 62453-51-60-20192019-02-25EnglishField device tool (FDT) interface specification – Part 51-60: Communication implementation for common object model – IEC 61784 CPF 6
24DS DS/ISO 21546-20192019-02-25EnglishPaints and varnishes – Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)
25DS DS/ISO 21940-1-20192019-02-25EnglishMechanical vibration – Rotor balancing – Part 1: Introduction
26DS DS/EN IEC 62933-2-1/AC-20192019-02-25EnglishElectrical energy storage (EES) systems – Part 2-1: Unit parameters and testing methods – General specification
27DS DS/CLC/TR 62453-51-32-20192019-02-25EnglishField device tool (FDT) interface specification – Part 51-32: Communication implementation for common object model – IEC 61784 CP 3/4, CP 3/5 and CP 3/6
28DS DS/CLC/TR 62453-51-90-20192019-02-25EnglishField device tool (FDT) interface specification – Part 51-90: Communication implementation for common object model – IEC 61784 CPF 9
29DS DS/EN 2288-20192019-02-25EnglishAerospace series – Bush, flanged, corrosion resisting steel, with self-lubricating liner – Dimensions and loads
30DS DS/EN ISO 7027-2-20192019-02-25EnglishWater quality – Determination of turbidity – Part 2: Semi-quantitative methods for the assessment of transparency of waters (ISO 7027-2:2019)
31DS DS/ISO 19926-1-20192019-02-25EnglishMeteorology – Weather radar – Part 1: System performance and operation
32DS DS/EN ISO 20150-20192019-02-25EnglishFootwear and footwear components – Quantitative challenge test method to assess antifungal activity (ISO 20150:2019)
33DS DS/EN 14728-20192019-02-25EnglishImperfections in thermoplastic welds – Classification
34DS DS/EN 14214+A2-20192019-02-25EnglishLiquid petroleum products – Fatty acid methyl esters (FAME) for use in diesel engines and heating applications – Requirements and test methods
35DS DS/EN IEC 60730-2-9-20192019-02-25EnglishAutomatic electrical controls – Part 2-9: Particular requirements for temperature sensing controls
36DS DS/EN IEC 60900/AC-20192019-02-25EnglishLive working – Hand tools for use up to 1 000 V AC and 1 500 V DC
37DS DS/ISO 799-1-20192019-02-25EnglishShips and marine technology – Pilot ladders – Part 1: Design and specification
38DS DS/EN IEC 60730-2-9/A1-20192019-02-25EnglishAutomatic electrical controls – Part 2-9: Particular requirements for temperature sensing controls
39DS DS/ISO 50021-20192019-02-25EnglishEnergy management and energy savings – General guidelines for selecting energy savings evaluators
40DS DS/ISO 29281-2-20192019-02-22EnglishIntelligent transport systems – Localized communications – Part 2: Legacy system support
41DS DS/ISO 29464-20192019-02-20EnglishCleaning of air and other gases – Terminology
42DS DS/ISO 2063-1-20192019-02-19EnglishThermal spraying – Zinc, aluminium and their alloys – Part 1: Design considerations and quality requirements for corrosion protection systems
43DS DS/EN IEC 61496-3-20192019-02-18EnglishSafety of machinery – Electro-sensitive protective equipment – Part 3: Particular requirements for active opto-electronic protective devices responsive to diffuse Reflection (AOPDDR)
44DS DS/EN IEC 62660-2-20192019-02-18EnglishSecondary lithium-ion cells for the propulsion of electric road vehicles – Part 2: Reliability and abuse testing
45DS DS/EN IEC 62660-1-20192019-02-18EnglishSecondary lithium-ion cells for the propulsion of electric road vehicles – Part 1: Performance testing
46DS DS/HD 60364-7-721-20192019-02-18EnglishLow-voltage electrical installations – Part 7-721: Requirements for special installations or locations – Electrical installations in caravans and motor caravans
47DS DS/EN 16842-9-20192019-02-18EnglishPowered industrial trucks – Visibility – Test methods and verification – Part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position
48DS DS/EN IEC 62087-7-20192019-02-18EnglishAudio, video, and related equipment – Methods of measurement for power consumption Part 7: Computer monitors
49DS DS/EN IEC 61967-1-20192019-02-18EnglishIntegrated circuits – Measurement of electromagnetic emissions – Part 1: General conditions and definitions
50DS DS/ISO 23500-2-20192019-02-18EnglishPreparation and quality management of fluids for haemodialysis and related therapies – Part 2: Water treatment equipment for haemodialysis applications and related therapies
51DS DS/ISO/IEC 21823-1-20192019-02-18EnglishInternet of Things (IoT) – Interoperability for IoT systems – Part 1: Framework
52DS DS/IEC TS 62977-3-1-20192019-02-18EnglishElectronic displays – Part 3-1: Evaluation of optical performances – Colour difference based viewing direction dependence
53DS DS/IEC TS 63060-20192019-02-18EnglishElectric energy supply networks – General aspects and methods for the maintenance of installations and equipment
54DS DS/IEC TS 63070-20192019-02-18EnglishUltrasonics – Field characterization – Infrared imaging techniques for determining temperature elevation in tissue-mimicking material and at the radiation surface of a transducer in still air
55DS DS/ISO 5832-12-20192019-02-18EnglishImplants for surgery – Metallic materials – Part 12: Wrought cobalt-chromium-molybdenum alloy
56DS DS/ISO 5834-1-20192019-02-18EnglishImplants for surgery – Ultra-high-molecular-weight polyethylene – Part 1: Powder form
57DS DS/ISO 5834-2-20192019-02-18EnglishImplants for surgery – Ultra-high-molecular-weight polyethylene – Part 2: Moulded forms
58DS DS/ISO 5834-3-20192019-02-18EnglishImplants for surgery – Ultra-high-molecular-weight polyethylene – Part 3: Accelerated ageing methods
59DS DS/EN 13074-2-20192019-02-18EnglishBitumen and bituminous binders – Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders – Part 2: Stabilization after recovery by evaporation
60DS DS/EN 13074-1-20192019-02-18EnglishBitumen and bituminous binders – Recovery of binder from bituminous emulsion or cut-back or fluxed bituminous binders – Part 1: Recovery by evaporation
61DS DS/ISO 23753-2-20192019-02-18EnglishSoil quality – Determination of dehydrogenase activity in soils – Part 2: Method using iodotetrazolium chloride (INT)
62DS DS/ISO 23753-1-20192019-02-18EnglishSoil quality – Determination of dehydrogenase activity in soils – Part 1: Method using triphenyltetrazolium chloride (TTC)
63DS DS/ISO 5834-4-20192019-02-18EnglishImplants for surgery – Ultra-high-molecular-weight polyethylene – Part 4: Oxidation index measurement method
64DS DS/ISO 23500-5-20192019-02-18EnglishPreparation and quality management of fluids for haemodialysis and related therapies – Part 5: Quality of dialysis fluid for haemodialysis and related therapies
65DS DS/ISO 23500-4-20192019-02-18EnglishPreparation and quality management of fluids for haemodialysis and related therapies – Part 4: Concentrates for haemodialysis and related therapies
66DS DS/ISO 23500-3-20192019-02-18EnglishPreparation and quality management of fluids for haemodialysis and related therapies – Part 3: Water for haemodialysis and related therapies
67DS DS/EN 14243-3-20192019-02-18EnglishMaterials obtained from end of life tyres – Part 3: Shreds, cuts and chips – Methods for determining their dimension(s) including protruding filaments dimensions
68DS DS/EN 14243-2-20192019-02-18EnglishMaterials obtained from end of life tyres – Part 2: Granulates and powders – Methods for determining the particle size distribution and impurities, including free steel and free textile content
69DS DS/EN 14243-1-20192019-02-18EnglishMaterials obtained from end of life tyres – Part 1: General definitions related to the methods for determining their dimension(s) and impurities
70DS DS/ISO 3901-20192019-02-18EnglishInformation and documentation – International Standard Recording Code (ISRC)
71DS DS/CEN/TR 17345-20192019-02-18EnglishWaste – State-of-the-art document – Halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography detection
72DS DS/ISO 10087-20192019-02-18EnglishSmall craft – Craft identification – Coding system
73DS DS/ISO 8362-1-20192019-02-18EnglishInjection containers and accessories – Part 1: Injection vials made of glass tubing
74DS DS/ISO 5834-5-20192019-02-18EnglishImplants for surgery – Ultra-high-molecular-weight polyethylene – Part 5: Morphology assessment method
75DS DS/EN 60662/A11-20192019-02-18EnglishHigh-pressure sodium vapour lamps – Performance specifications
76DS DS/EN 17163-20192019-02-18EnglishPulp, paper and board – Determination of primary aromatic amines (PAA) in a water extract by a LC-MS method
77DS DS/EN 17087-20192019-02-18EnglishConstruction products: Assessment of release of dangerous substances – Preparation of test portions from the laboratory sample for testing of release and analysis of content
78DS DS/CLC IEC/TR 62453-52-150-20192019-02-18EnglishField device tool (FDT) interface specification – Part 52-150: Communication implementation for common language infrastructure – IEC 61784 CPF 15
79DS DS/CLC IEC/TR 62453-52-90-20192019-02-18EnglishField device tool (FDT) interface specification – Part 52-90: Communication implementation for common language infrastructure – IEC 61784 CPF 9
80DS DS/CLC IEC/TR 62453-52-32-20192019-02-18EnglishField device tool (FDT) interface specification – Part 52-32: Communication implementation for common language infrastructure – IEC 61784 CP 3/4, CP 3/5 and CP 3/6
81DS DS/CLC IEC/TR 62453-52-31-20192019-02-18EnglishField device tool (FDT) interface specification – Part 52-31: Communication implementation for common language infrastructure – IEC 61784 CP 3/1 and CP 3/2
82DS DS/CLC IEC/TR 62453-51-150-20192019-02-18EnglishField device tool (FDT) interface specification – Part 51-150: Communication implementation for common object model – IEC 61784 CPF 15
83DS DS/CEN/TR 13695-2-20192019-02-18EnglishPackaging – Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging, and their release into the environment – Part 2: Requirements for measuring and verifying dangerous substances pres
84DS DS/ISO 16696-1-20192019-02-18EnglishTimber structures – Cross laminated timber – Part 1: Component performance, production requirements and certification scheme
85DS DS/EN 12873-3-20192019-02-18EnglishInfluence of materials on water intended for human consumption – Influence due to migration – Part 3: Test method for ion exchange and adsorbent resins
86DS DS/ETSI EN 303 098 V2.2.1-20192019-02-18EnglishMaritime low power personal locating devices employing AIS; Harmonised Standard for access to radio spectrum
87DS DS/EN ISO 23907-1-20192019-02-18EnglishSharps injury protection – Requirements and test methods – Part 1: Single-use sharps containers (ISO 23907-1:2019)
88DS DS/EN ISO 683-3-20192019-02-18EnglishHeat-treatable steels, alloy steels and free-cutting steels – Part 3: Case-hardening steels (ISO 683-3:2019)
89DS DS/EN ISO 15118-5-20192019-02-18EnglishRoad vehicles – Vehicle to grid communication interface – Part 5: Physical layer and data link layer conformance test (ISO 15118-5:2018)
90DS DS/EN ISO 11296-7-20192019-02-18EnglishPlastics piping systems for renovation of underground non-pressure drainage and sewerage networks – Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
91DS DS/EN ISO 11930-20192019-02-18EnglishCosmetics – Microbiology – Evaluation of the antimicrobial protection of a cosmetic product (ISO 11930:2019)
92DS DS/EN ISO 15118-8-20192019-02-18EnglishRoad vehicles – Vehicle to grid communication interface – Part 8: Physical layer and data link layer requirements for wireless communication (ISO 15118-8:2018)
93DS DS/EN ISO 10819/A1-20192019-02-18EnglishMechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand – Amendment 1 (ISO 10819:2013/Amd 1:2019)
94DS DS/EN ISO 15118-4-20192019-02-18EnglishRoad vehicles – Vehicle to grid communication interface – Part 4: Network and application protocol conformance test (ISO 15118-4:2018)
95DS DS/ISO 22117-20192019-02-18EnglishMicrobiology of the food chain – Specific requirements and guidance for proficiency testing by interlaboratory comparison
96DS DS/ISO 23500-1-20192019-02-18EnglishPreparation and quality management of fluids for haemodialysis and related therapies – Part 1: General requirements
97DS DS/EN 1434-5+A1-20192019-02-18EnglishThermal energy meters – Part 5: Initial verification tests
98DS DS/EN 1434-6+A1-20192019-02-18EnglishThermal energy meters – Part 6: Installation, commissioning, operational monitoring and maintenance
99DS DS/ISO 19127-20192019-02-18EnglishGeographic information – Geodetic register
100DS DS/ETSI EN 319 521 V1.1.1-20192019-02-18EnglishElectronic Signatures and Infrastructures (ESI); Policy and security requirements for Electronic Registered Delivery Service Providers
101DS DS/ISO 18388-20192019-02-13EnglishTechnical product documentation (TPD) – Relief grooves – Types and dimensioning
102DS DS/ISO 20088-3-20192019-02-13EnglishDetermination of the resistance to cryogenic spillage of insulation materials – Part 3: Jet release
103DS DS/ISO 5362-20192019-02-13EnglishAnaesthetic reservoir bags
104DS DS/ISO 17422-20192019-02-13EnglishPlastics – Environmental aspects – General guidelines for their inclusion in standards
105DS DS/ISO/IEC/IEEE 24748-8-20192019-02-12EnglishSystems and software engineering – Life cycle management – Part 8: Technical reviews and audits on defense programs
106DS DS/ISO/IEC/IEEE 24748-7-20192019-02-12EnglishSystems and software engineering – Life cycle management – Part 7: Application of systems engineering on defense programs
107DS DS/ISO/TS 21231-20192019-02-12EnglishWater quality – Characterization of analytical methods – Guidelines for the selection of a representative matrix
108DS DS/ISO/TR 56004-20192019-02-12EnglishInnovation Management Assessment – Guidance
109DS DS/EN ISO 18254-2-20192019-02-12EnglishTextiles – Method for the detection and determination of alkylphenol ethoxylates (APEO) – Part 2: Method using NPLC (ISO 18254-2:2018)
110DS DS/ISO 5832-9-20192019-02-12EnglishImplants for surgery – Metallic materials – Part 9: Wrought high nitrogen stainless steel
111DS DS/ISO/CIE TS 22012-20192019-02-12EnglishLight and lighting – Maintenance factor determination – Way of working
112DS DS/ISO 5832-14-20192019-02-12EnglishImplants for surgery – Metallic materials – Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy
113DS DS/ISO 56003-20192019-02-11EnglishInnovation management – Tools and methods for innovation partnership – Guidance
114DS DS/ISO 787-25-20192019-02-11EnglishGeneral methods of test for pigments and extenders – Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments – Colorimetric method
115DS DS/ISO 24679-1-20192019-02-11EnglishFire safety engineering – Performance of structures in fire – Part 1: General
116DS DS/EN IEC 62474-20192019-02-11EnglishMaterial declaration for products of and for the electrotechnical industry
117DS DS/ISO 3451-1-20192019-02-11EnglishPlastics – Determination of ash – Part 1: General methods
118DS DS/ISO/IEC 15961-3-20192019-02-11EnglishInformation technology – Data protocol for radio frequency identification (RFID) for item management – Part 3: RFID data constructs
119DS DS/IEC TR 62629-41-1-20192019-02-11English3D Display devices – Part 41-1: Generic introduction of holographic display
120DS DS/IEC 63075-20192019-02-11EnglishSuperconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV – Test methods and requirements
121DS DS/ISO 15630-2-20192019-02-11EnglishSteel for the reinforcement and prestressing of concrete – Test methods – Part 2: Welded fabric and lattice girders
122DS DS/ISO 10517-20192019-02-11EnglishPowered hand-held hedge trimmers – Safety
123DS DS/ISO 13473-1-20192019-02-11EnglishCharacterization of pavement texture by use of surface profiles – Part 1: Determination of mean profile depth
124DS DS/ISO 15630-3-20192019-02-11EnglishSteel for the reinforcement and prestressing of concrete – Test methods – Part 3: Prestressing steel
125DS DS/CEN/TR 17320-20192019-02-11EnglishRailway applications – Infrastructure – Determination of laboratory test parameters for assessing the mechanical durability of rail fastening systems – Complementary element
126DS DS/ISO/IEC/IEEE 41062-20192019-02-11EnglishSoftware engineering – Recommended practice for software acquisition
127DS DS/EN 50436-4-20192019-02-11EnglishAlcohol interlocks – Test methods and performance requirements – Part 4: Connection and digital interface between the alcohol interlock and the vehicle
128DS DS/EN 60188/A11-20192019-02-11EnglishHigh-pressure mercury vapour lamps – Performance specifications
129DS DS/ISO 7171-20192019-02-11EnglishFurniture – Storage units – Test methods for the determination of stability
130DS DS/EN ISO 17226-2-20192019-02-11EnglishLeather – Chemical determination of formaldehyde content – Part 2: Method using colorimetric analysis (ISO 17226-2:2018)
131DS DS/EN ISO 17226-1-20192019-02-11EnglishLeather – Chemical determination of formaldehyde content – Part 1: Method using high performance liquid chromatography (ISO 17226-1:2018)
132DS DS/ISO 21084-20192019-02-11EnglishTextiles – Method for determination of alkylphenols (AP)
133DS DS/EN ISO 15195-20192019-02-11EnglishLaboratory medicine – Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
134DS DS/EN ISO 10111-20192019-02-11EnglishMetallic and other inorganic coatings – Measurement of mass per unit area – Review of gravimetric and chemical analysis methods (ISO 10111:2019)
135DS DS/EN ISO 14064-1-20192019-02-11EnglishGreenhouse gases – Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2018)
136DS DS/EN ISO 5398-4-20192019-02-11EnglishLeather – Chemical determination of chromic oxide content – Part 4: Quantification by inductively coupled plasma (ICP) (ISO 5398-4:2018)
137DS DS/EN ISO 294-4-20192019-02-11EnglishPlastics – Injection moulding of test specimens of thermoplastic materials – Part 4: Determination of moulding shrinkage (ISO 294-4:2018)
138DS DS/EN ISO 19115-2-20192019-02-11EnglishGeographic information – Metadata – Part 2: Extensions for acquisition and processing (ISO 19115-2:2019)
139DS DS/CEN GUIDE 17-20192019-02-05EnglishSafety of pressure equipment – Rules and recommendations for the drafting and presentation of safety standards
140DS DS/ISO 29281-1-20192019-02-05EnglishIntelligent transport systems – Localized communications – Part 1: Fast networking & transport layer protocol (FNTP)
141DS DS/ISO/TR 21718-20192019-02-05EnglishIntelligent transport systems – Spatio-temporal data dictionary for cooperative ITS and automated driving systems 2.0
142DS DS/ISO 16355-3-20192019-02-05EnglishApplications of statistical and related methods to new technology and product development process – Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder
143DS DS/ISO 8102-6-20192019-02-05EnglishElectrical requirements for lifts, escalators and moving walks – Part 6: Programmable electronic systems in safety-related applications for escalators and moving walks (PESSRAE)
144DS DS/ISO/TS 21726-20192019-02-05EnglishBiological evaluation of medical devices – Application of the threshold of toxicological concern (TTC) for assessing biocompatibility of medical device constituents
145DS DS/EN 17177-20192019-02-04EnglishGlass packaging – Crown cap – 26 mm diameter, 6 mm height crown cap
146DS DS/ISO/TS 6336-4-20192019-02-04EnglishCalculation of load capacity of spur and helical gears – Part 4: Calculation of tooth flank fracture load capacity
147DS DS/ISO 10524-2-20192019-02-04EnglishPressure regulators for use with medical gases – Part 2: Manifold and line pressure regulators
148DS DS/ISO 12232-20192019-02-04EnglishPhotography – Digital still cameras – Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index
149DS DS/ISO 10524-3-20192019-02-04EnglishPressure regulators for use with medical gases – Part 3: Pressure regulators integrated with cylinder valves (VIPRs)
150DS DS/ISO 11783-12-20192019-02-04EnglishTractors and machinery for agriculture and forestry – Serial control and communications data network – Part 12: Diagnostics services
151DS DS/EN 62852/AC-20192019-02-04EnglishConnectors for DC-application in photovoltaic systems – Safety requirements and tests
152DS DS/CEN/TR 17311-20192019-02-04EnglishPublic transport – Interoperable fare management system – Bluetooth low energy ticketing use cases and guidelines
153DS DS/CEN/TR 17310-20192019-02-04EnglishCarbonation and CO2 uptake in concrete
154DS DS/ISO 17201-3-20192019-02-04EnglishAcoustics – Noise from shooting ranges – Part 3: Sound propagation calculations
155DS DS/ISO 16812-20192019-02-04EnglishPetroleum, petrochemical and natural gas industries – Shell-and-tube heat exchangers
156DS DS/ISO 16000-38-20192019-02-04EnglishIndoor air – Part 38: Determination of amines in indoor and test chamber air – Active sampling on samplers containing phosphoric acid impregnated filters
157DS DS/ISO 16000-37-20192019-02-04EnglishIndoor air – Part 37: Measurement of PM2,5 mass concentration
158DS DS/ISO 10524-1-20192019-02-04EnglishPressure regulators for use with medical gases – Part 1: Pressure regulators and pressure regulators with flow-metering devices
159DS DS/ISO/TS 19677-20192019-02-04EnglishGuidelines for assessing the adverse impact of wildland fires on the environment and to people through environmental exposure
160DS DS/EN 50549-2-20192019-02-04EnglishRequirements for generating plants to be connected in parallel with distribution networks – Part 2: Connection to a MV distribution network – Generating plants up to and including Type B
161DS DS/EN 50549-1-20192019-02-04EnglishRequirements for generating plants to be connected in parallel with distribution networks – Part 1: Connection to a LV distribution network – Generating plants up to and including Type B
162DS DS/ISO 21305-2-20192019-02-04EnglishPlastics – Polycarbonate (PC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
163DS DS/EN IEC 63033-2-20192019-02-04EnglishCar multimedia systems and equipment – Drive monitoring system Part 2: Recording methods of the drive monitoring system
164DS DS/EN ISO 7396-1/A1-20192019-02-04EnglishMedical gas pipeline systems – Part 1: Pipeline systems for compressed medical gases and vacuum – Amendment 1 (ISO 7396-1:2016/Amd 1:2017)
165DS DS/EN ISO 10079-1/A1-20192019-02-04EnglishMedical suction equipment – Part 1: Electrically powered suction equipment – Amendment 1: Changes to requirements for operating at extremes of temperature (ISO 10079-1:2015/Amd 1:2018)
166DS DS/EN ISO 10524-1-20192019-02-04EnglishPressure regulators for use with medical gases – Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018)
167DS DS/EN ISO 10524-2-20192019-02-04EnglishPressure regulators for use with medical gases – Part 2: Manifold and line pressure regulators (ISO 10524-2:2018)
168DS DS/EN ISO 10524-3-20192019-02-04EnglishPressure regulators for use with medical gases – Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019)
169DS DS/EN ISO 80601-2-61-20192019-02-04EnglishMedical electrical equipment – Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2017)
170DS DS/ETSI EN 319 522-4-1 V1.2.1-20192019-02-04EnglishElectronic Signatures and Infrastructures (ESI); Electronic Registered Delivery Services; Part 4: Bindings; Sub-part 1: Message delivery bindings
171DS DS/ETSI EN 319 531 V1.1.1-20192019-02-04EnglishElectronic Signatures and Infrastructures (ESI); Policy and security requirements for Registered Electronic Mail Service Providers
172DS DS/ISO 19111-20192019-02-04EnglishGeographic information – Referencing by coordinates
173DS DS/ISO 19150-2/AMD 1-20192019-02-04EnglishGeographic information – Ontology – Part 2: Rules for developing ontologies in the Web Ontology Language (OWL) AMENDMENT 1
174DS DS/ISO 19636-20192019-02-04EnglishShips and marine technology – General requirements for inclinometers used for the determination of trim and list of LNG carriers
175DS DS/ISO 19642-2-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 2: Test methods
176DS DS/ISO 19642-3-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables
177DS DS/ISO 19642-4-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 4: Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables
178DS DS/ISO 19642-5-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core copper conductor cables
179DS DS/ISO 19642-6-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 6: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core aluminium conductor cables
180DS DS/ISO 19642-7-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables
181DS DS/ISO 19642-8-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 8: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables
182DS DS/ISO 19642-9-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables
183DS DS/ISO 19642-10-20192019-02-04EnglishRoad vehicles – Automotive cables – Part 10: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables
184DS DS/IEC TR 63194-20192019-02-04EnglishGuidance on colour coding of optical fibre cables
185DS DS/ISO/IEC 9798-3-20192019-02-04EnglishIT Security techniques – Entity authentication – Part 3: Mechanisms using digital signature techniques
186DS DS/EN 16167+AC-20192019-02-04EnglishSoil, treated biowaste and sludge – Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
187DS DS/ISO/IEC 19086-4-20192019-02-04EnglishCloud computing – Service level agreement (SLA) framework – Part 4: Components of security and of protection of PII
188DS DS/EN 13146-1-20192019-02-04EnglishRailway applications – Track – Test methods for fastening systems – Part 1: Determination of longitudinal rail restraint
189DS DS/IEC TS 60904-1-2-20192019-02-04EnglishPhotovoltaic devices – Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices
190DS DS/EN 13146-7-20192019-02-04EnglishRailway applications – Track – Test methods for fastening systems – Part 7: Determination of clamping force and uplift stiffness
191DS DS/ISO/IEC 20933-20192019-02-04EnglishInformation technology – Distributed application platforms and services (DAPS) – Framework for distributed real-time access systems
192DS DS/IEC TR 62839-2-20192019-02-04EnglishEnvironmental declaration – Part 2: Optical/copper telecom accessories products specific rules
193DS DS/EN IEC 62840-2-20192019-02-04EnglishElectric vehicle battery swap system – Part 2: Safety requirements
194DS DS/ISO 4869-6-20192019-02-04EnglishAcoustics – Hearing protectors – Part 6: Determination of sound attenuation of active noise reduction earmuffs
195DS DS/EN 14033-4-20192019-02-04EnglishRailway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail
196DS DS/ISO 80601-2-61-20192019-02-04EnglishMedical electrical equipment – Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
197DS DS/ISO 3008-1-20192019-02-04EnglishFire resistance tests – Door and shutter assemblies – Part 1: General requirements
198DS DS/ISO 30301-20192019-02-04EnglishInformation and documentation – Management systems for records – Requirements
199DS DS/EN 13141-1-20192019-02-04EnglishVentilation for buildings – Performance testing of components/products for residential ventilation – Part 1: Externally and internally mounted air transfer devices
200DS DS HANDBOOK 121-20192019-01-31EnglishPlayground equipment – The DS/EN 1176 series in English
201DS DS/IEC TR 63040/COR1-20192019-01-28EnglishGuidance on clearances and creepage distances in particular for distances equal to or less than 2 mm – Test results of research on influencing parameters
202DS DS/ISO/CIE 20086-20192019-01-28EnglishLight and lighting – Energy performance of lighting in buildings
203DS DS/ISO 23599-20192019-01-28EnglishAssistive products for blind and vision-impaired persons – Tactile walking surface indicators
204DS DS/EN 13454-2-20192019-01-28EnglishBinders for floor screeds based on calcium sulphate – Part 2: Test methods
205DS DS/EN IEC 60204-11-20192019-01-28EnglishSafety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV
206DS DS/EN 62366-1/AC-20192019-01-28EnglishMedical devices – Part 1: Application of usability engineering to medical devices
207DS DS/CEN ISO/TS 21805-20192019-01-28EnglishGuidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO/TS 21805:2018)
208DS DS/EN 61481-1/AC-20192019-01-28EnglishLive working – Phase comparators – Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
209DS DS/EN 62317-4/AC-20192019-01-28EnglishFerrite cores – Dimensions – Part 4: RM-cores and associated parts
210DS DS/ISO/IEC TS 17021-8-20192019-01-28EnglishConformity assessment – Requirements for bodies providing audit and certification of management systems – Part 8: Competence requirements for auditing and certification of management systems for sustainable development in communities
211DS DS/EN ISO 7263-1-20192019-01-28EnglishCorrugating medium – Determination of the flat crush resistance after laboratory fluting – Part 1: A-flute (ISO 7263-1:2019)
212DS DS/EN 81-28+AC-20192019-01-28EnglishSafety rules for the construction and installation of lifts – Lifts for the transport of persons and goods – Part 28: Remote alarm on passenger and goods passenger lifts
213DS DS/EN ISO 20166-3-20192019-01-28EnglishMolecular in vitro diagnostic examinations – Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue – Part 3: Isolated DNA (ISO 20166-3:2018)
214DS DS/ISO 18473-3-20192019-01-28EnglishFunctional pigments and extenders for special application – Part 3: Fumed silica for silicone rubber application (ISO 18473-3:2018)
215DS DS/EN 81-71+AC-20192019-01-28EnglishSafety rules for the construction and installation of lifts – Particular applications to passenger lifts and goods passenger lifts – Part 71: Vandal resistant lifts
216DS DS/EN ISO 9994-20192019-01-28EnglishLighters – Safety specification (ISO 9994:2018)
217DS DS/EN ISO 14405-2-20192019-01-28EnglishGeometrical product specifications (GPS) – Dimensional tolerancing – Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
218DS DS/ISO 20035-20192019-01-22EnglishIntelligent transport systems – Cooperative adaptive cruise control systems (CACC) – Performance requirements and test procedures
219DS DS/ISO 683-3-20192019-01-22EnglishHeat-treatable steels, alloy steels and free-cutting steels – Part 3: Case-hardening steels
220DS DS/IEC TR 61850-7-6-20192019-01-21EnglishCommunication networks and systems for power utility automation – Part 7-6: Guideline for definition of Basic Application Profiles (BAPs) using IEC 61850
221DS DS/EN 16140-20192019-01-21EnglishNatural stone test methods – Determination of sensitivity to changes in appearance produced by thermal cycles
222DS DS/ISO/IEC 27018-20192019-01-21EnglishInformation technology – Security techniques – Code of practice for protection of personally identifiable information (PII) in public clouds acting as PII processors
223DS DS/IEC TR 63176-20192019-01-21EnglishProcess analysis technology systems as part of safety instrumented systems
224DS DS/IEC TR 61292-8-20192019-01-21EnglishOptical amplifiers – Part 8: High-power amplifiers
225DS DS/IEC TR 61000-1-8-20192019-01-21EnglishElectromagnetic compatibility – Part 1-8: Phase angles of harmonic current emissions and voltages in the public supply networks – Future expectations
226DS DS/EN 16601-00-20192019-01-21EnglishSpace system – EN 16600 series – Description, implementation and general requirements
227DS DS/IEC 62888-6-20192019-01-21EnglishRailway applications – Energy measurement on board trains – Part 6: Requirements for purposes other than billing
228DS DS/ISO 7175-2-20192019-01-21EnglishFurniture – Childrens cots and folding cots for domestic use – Part 2: Test methods
229DS DS/IEC 61747-30-5-20192019-01-21EnglishLiquid crystal display devices – Part 30-5: Optical measuring methods of transmissive transparent LCD modules
230DS DS/ISO 21802-20192019-01-21EnglishAssistive products – Guidelines on cognitive accessibility – Daily time management
231DS DS/ISO 22157-20192019-01-21EnglishBamboo structures – Determination of physical and mechanical properties of bamboo culms – Test methods
232DS DS/ISO 7175-1-20192019-01-21EnglishFurniture – Childrens cots and folding cots for domestic use – Part 1: Safety requirements
233DS DS/EN 60898-1-20192019-01-21EnglishElectrical accessories – Circuit-breakers for overcurrent protection for household and similar installations – Part 1: Circuit-breakers for a.c. operation
234DS DS/CEN/TS 17287-20192019-01-21EnglishRequirements and test methods for electronic cigarette devices
235DS DS/ISO/IEC TS 27008-20192019-01-21EnglishInformation technology – Security techniques – Guidelines for the assessment of information security controls
236DS DS/ISO/TS 15311-2-20192019-01-21EnglishGraphic technology – Print quality requirements for printed matter – Part 2: Commercial print applications utilizing digital printing technologies
237DS DS/ETSI EN 303 471 V1.1.1-20192019-01-15EnglishEnvironmental Engineering (EE); Energy Efficiency measurement methodology and metrics for Network Function Virtualisation (NFV)
238DS DS/ISO 18640-1-20192019-01-15EnglishProtective clothing for firefighters – Physiological impact – Part 1: Measurement of coupled heat and moisture transfer with the sweating torso
239DS DS/ISO 18640-2-20192019-01-15EnglishProtective clothing for firefighters – Physiological impact – Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO 18640-2:2018)
240DS DS/EN 1176-6+AC-20192019-01-14EnglishPlayground equipment and surfacing – Part 6: Additional specific safety requirements and test methods for rocking equipment
241DS DS/EN ISO 2818-20192019-01-14EnglishPlastics – Preparation of test specimens by machining (ISO 2818:2018)
242DS DS/EN 1177+AC-20192019-01-14EnglishImpact attenuating playground surfacing – Methods of test for determination of impact attenuation
243DS DS/EN IEC 63135-20192019-01-14EnglishMaritime navigation and radiocommunication equipment and systems – Automatic identification systems (AIS) – SAR Airborne equipment – Operational and performance requirements, methods of test and required test results
244DS DS/ISO 21446-20192019-01-14EnglishInfant formula and adult nutritionals -Determination of trans and total (cis + trans) vitamin K1 content – Normal phase HPLC
245DS DS/EN 1176-4+AC-20192019-01-14EnglishPlayground equipment and surfacing – Part 4: Additional specific safety requirements and test methods for cableways
246DS DS/EN ISO 7263-2-20192019-01-14EnglishCorrugating medium – Determination of the flat crush resistance after laboratory fluting – Part 2: B-flute (ISO 7263-2:2018)
247DS DS/EN IEC 61058-2-6-20192019-01-14EnglishSwitches for appliances – Part 2-6: Particular requirements for switches used in electric motor-operated hand-held tools, transportable tools and lawn and garden machinery
248DS DS/EN IEC 60665-20192019-01-14EnglishA.C. ventilating fans and regulators for household and similar purposes – Methods for measuring performance
249DS DS/ISO 2818-20192019-01-14EnglishPlastics – Preparation of test specimens by machining
250DS DS/EN 60335-2-24/A2-20192019-01-14EnglishHousehold and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
251DS DS/ISO 14511-20192019-01-14EnglishMeasurement of fluid flow in closed conduits – Thermal mass flowmeters
252DS DS/ISO 11452-2-20192019-01-14EnglishRoad vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 2: Absorber-lined shielded enclosure
253DS DS/EN 60601-2-40-20192019-01-14EnglishMedical electrical equipment – Part 2-40: Particular requirements for the basic safety and essential performance of electromyographs and evoked response equipment
254DS DS/ISO/TR 19688-20192019-01-14EnglishRotodynamic pumps – Hydraulic performance acceptance test using a model pump
255DS DS/ISO 16964-20192019-01-14EnglishGas cylinders – Flexible hoses assemblies – Specification and testing
256DS DS/ISO 11040-6-20192019-01-14EnglishPrefilled syringes – Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling
257DS DS/EN 60335-2-24/A1-20192019-01-14EnglishHousehold and similar electrical appliances – Safety – Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
258DS DS/ISO 14242-3/AMD 1-20192019-01-14EnglishImplants for surgery – Wear of total hip-joint prostheses – Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test AMENDMENT 1
259DS DS/EN 61970-453/A1-20192019-01-14EnglishEnergy management system application program interface (EMS-API) – Part 453: Diagram layout profile
260DS DS/ISO/PAS 21448-20192019-01-14EnglishRoad vehicles – Safety of the intended functionality
261DS DS/ISO/IEC TR 22678-20192019-01-14EnglishInformation technology – Cloud computing – Guidance for policy development
262DS DS/ISO 14827-3-20192019-01-14EnglishTransport information and control systems – Data interfaces between centres for transport information and control systems – Part 3: Data interfaces between centres for intelligent transport sytems (ITS) using XML (Profile A)
263DS DS/ISO 7263-2-20192019-01-14EnglishCorrugating medium – Determination of the flat crush resistance after laboratory fluting -Part 2: B-flute
264DS DS/CEN ISO/TS 15877-7-20192019-01-04EnglishPlastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 7: Guidance for the assessment of conformity (ISO/TS 15877-7:2018)
265DS DS/EN 60065/AC-20192019-01-04EnglishAudio, video and similar electronic apparatus – Safety requirements
266DS DS/EN 17203-20192019-01-04EnglishFoodstuffs – Determination of citrinin in food by liquid chromatography tandem mass spectrometry (LC-MS/MS)
267DS DS/EN 17192-20192019-01-04EnglishVentilation for buildings – Ductwork – Non-metallic ductwork – Requirements and test methods
268DS DS/EN 17183-20192019-01-04EnglishCharacterization of sludge – Evaluation of sludge density
269DS DS/CEN/TS 13445-501-20192019-01-04EnglishUnfired pressure vessels – Part 501: Acoustic emission for pressure vessels
270DS DS/CEN ISO/TS 22391-7-20192019-01-04EnglishPlastics piping systems for hot and cold water installations – Polyethylene of raised temperature resistance (PE-RT) – Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018)
271DS DS/CEN ISO/TS 15876-7-20192019-01-04EnglishPlastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 7: Guidance for the assessment of conformity (ISO/TS 15876-7:2018)
272DS DS/CEN ISO/TS 15875-7-20192019-01-04EnglishPlastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 7: Guidance for the assessment of conformity (ISO/TS 15875-7:2018)
273DS DS/CEN ISO/TS 15874-7-20192019-01-04EnglishPlastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 7: Guidance for the assessment of conformity (ISO/TS 15874-7:2018)
274DS DS/CEN ISO/TR 18486-20192019-01-04EnglishPlastics – Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2018)
275DS DS/EN IEC 60268-21-20192019-01-04EnglishSound system equipment – Part 21: Acoustical (output-based) measurements
276DS DS/ISO 17226-1-20192019-01-04EnglishLeather – Chemical determination of formaldehyde content – Part 1: Method using high performance liquid chromatography
277DS DS/ISO 17226-2-20192019-01-04EnglishLeather – Chemical determination of formaldehyde content – Part 2: Method using colorimetric analysis
278DS DS/EN ISO 20601-20192019-01-04EnglishNon-destructive testing of welds – Ultrasonic testing – Use of automated phased array technology for thin-walled steel components (ISO 20601:2018)
279DS DS/EN 12697-30-20192019-01-04EnglishBituminous mixtures – Test methods – Part 30: Specimen preparation by impact compactor
280DS DS/EN 2600-20192019-01-04EnglishAerospace series – Designation of metallic semi-finished products – Rules
281DS DS/EN 12697-8-20192019-01-04EnglishBituminous mixtures – Test methods – Part 8: Determination of void characteristics of bituminous specimens
282DS DS/EN 12697-5-20192019-01-04EnglishBituminous mixtures – Test methods – Part 5: Determination of the maximum density
283DS DS/EN 1762-20192019-01-04EnglishRubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) – Specification
284DS DS/ISO 20670-20192019-01-04EnglishWater reuse – Vocabulary
285DS DS/EN 196-11-20192019-01-04EnglishMethods of testing cement – Part 11: Heat of hydration – Isothermal Conduction Calorimetry method
286DS DS/EN ISO 12957-1-20192019-01-04EnglishGeosynthetics – Determination of friction characteristics – Part 1: Direct shear test (ISO 12957-1:2018)
287DS DS/EN ISO 15175-20192019-01-04EnglishSoil quality – Characterization of contaminated soil related to groundwater protection (ISO 15175:2018)
288DS DS/EN ISO 16133-20192019-01-04EnglishSoil quality – Guidance on the establishment and maintenance of monitoring programmes (ISO 16133:2018)
289DS DS/EN ISO 17201-1-20192019-01-04EnglishAcoustics – Noise from shooting ranges – Part 1: Determination of muzzle blast by measurement (ISO 17201-1:2018)
290DS DS/EN ISO 17892-10-20192019-01-04EnglishGeotechnical investigation and testing – Laboratory testing of soil – Part 10: Direct shear tests (ISO 17892-10:2018)
291DS DS/EN ISO 4612-20192019-01-04EnglishPlastics – Preparation of PVC pastes for test purposes – Planetary-mixer method (ISO 4612:2018)
292DS DS/EN ISO 3211-20192019-01-04EnglishAnodizing of aluminium and its alloys – Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
293DS DS/EN ISO 19277-20192019-01-04EnglishPetroleum, petrochemical and natural gas industries – Qualification testing and acceptance criteria for protective coating systems under insulation (ISO 19277:2018)
294DS DS/EN ISO 294-2-20192019-01-04EnglishPlastics – Injection moulding of test specimens of thermoplastic materials – Part 2: Small tensile bars (ISO 294-2:2018)
295DS DS/EN 13501-6-20192019-01-04EnglishFire classification of construction products and building elements – Part 6: Classification using data from reaction to fire tests on power, control and communication cables
296DS DS/EN IEC 62442-2/AC-20192019-01-04EnglishEnergy performance of lamp controlgear – Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) – Method of measurement to determine the efficiency of controlgear
297DS DS/EN IEC 60335-2-76/AC-20192019-01-04EnglishHousehold and similar electrical appliances – Safety – Part 2-76: Particular requirements for electric fence energizers
298DS DS/EN 13501-1-20192019-01-04EnglishFire classification of construction products and building elements – Part 1: Classification using data from reaction to fire tests
299DS DS/EN IEC 60404-16/AC-20192019-01-04EnglishMagnetic materials – Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester
300DS DS/EN IEC 60404-6/AC-20192019-01-04EnglishMagnetic materials – Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 100 kHz by the use of ring specimens
301DS DS/ISO 26262-11-20192019-01-04EnglishRoad vehicles - Functional safety - Part 11: Guidelines on application of ISO 26262 to semiconductors
302DS DS/EN IEC 60869-1-20192019-01-04EnglishFibre optic interconnecting devices and passive components – Fibre optic passive power control devices – Part 1: Generic specification
303DS DS/EN IEC 60721-2-7/AC-20192019-01-04EnglishClassification of environmental conditions – Part 2: Environmental conditions appearing in nature – Fauna and flora
304DS DS/EN IEC 60721-3-2/AC-20192019-01-04EnglishClassification of environmental conditions – Part 3-2: Classification of groups of environmental parameters and their severities – Transportation and Handling
305DS DS/EN IEC 60793-1-32-20192019-01-04EnglishOptical fibres – Part 1-32: Measurement methods and test procedures – Coating strippability
306DS DS/EN IEC 60721-2-4/AC-20192019-01-04EnglishClassification of environmental conditions – Part 2-4: Environmental conditions appearing in nature – Solar radiation and temperature
307DS DS/ISO 26262-7-20192019-01-02EnglishRoad vehicles – Functional safety – Part 7: Production, operation, service and decommissioning
308DS DS/ISO 26262-9-20192019-01-02EnglishRoad vehicles – Functional safety – Part 9: Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses
309DS DS/ISO 26262-10-20192019-01-02EnglishRoad vehicles – Functional safety – Part 10: Guidelines on ISO 26262
310DS DS/ISO 26262-12-20192019-01-02EnglishRoad vehicles – Functional safety – Part 12: Adaptation of ISO 26262 for motorcycles
311DS DS/EN 16475-3+A1-20192019-01-02EnglishChimneys – Accessories – Part 3: Draught regulators, standstill opening devices and combined secondary air devices – Requirements and test methods
312DS DS/EN 16190-20192019-01-02EnglishSoil, treated biowaste and sludge – Determination of dioxins and furans and dioxin-like polychlorinated biphenyls by gas chromatography with high resolution mass selective detection (HR GC-MS)
313DS DS/EN 16157-7-20192019-01-02EnglishIntelligent transport systems – DATEX II data exchange specifications for traffic management and information – Part 7: Common data elements
314DS DS/EN 16157-3-20192019-01-02EnglishIntelligent transport systems – DATEX II data exchange specifications for traffic management and information – Part 3: Situation Publication
315DS DS/EN 16157-1-20192019-01-02EnglishIntelligent transport systems – DATEX II data exchange specifications for traffic management and information – Part 1: Context and framework
316DS DS/EN 15663+A1-20192019-01-02EnglishRailway applications – Vehicle reference masses
317DS DS/EN 14836-20192019-01-02EnglishSurfaces for sports areas – Synthetic surfaces for outdoor sports areas – Test method for artificial weathering
318DS DS/EN 14701-4-20192019-01-02EnglishCharacterization of sludges – Filtration properties – Part 4: Determination of the drainability of flocculated sludge
319DS DS/EN 14363+A1-20192019-01-02EnglishRailway applications – Testing and Simulation for the acceptance of running characteristics of railway vehicles – Running Behaviour and stationary tests
320DS DS/EN 13766-20192019-01-02EnglishThermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas – Specification
321DS DS/EN 16729-4-20192019-01-02EnglishRailway applications – Infrastructure – Non-destructive testing on rails in track – Part 4: Qualification of personnel for non-destructive testing on rails
322DS DS/EN 16523-2+A1-20192019-01-02EnglishDetermination of material resistance to permeation by chemicals – Part 2: Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact
323DS DS/EN IEC 61784-5-2-20192019-01-02EnglishIndustrial communication networks – Profiles – Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2
324DS DS/EN IEC 61784-5-6-20192019-01-02EnglishIndustrial communication networks – Profiles – Part 5-6: Installation of fieldbuses – Installation profiles for CPF 6
325DS DS/EN IEC 61784-5-8-20192019-01-02EnglishIndustrial communication networks – Profiles – Part 5-8: Installation of fieldbuses – Installation profiles for CPF 8
326DS DS/EN IEC 61784-5-12-20192019-01-02EnglishIndustrial communication networks – Profiles – Part 5-12: Installation of fieldbuses – Installation profiles for CPF 12
327DS DS/EN IEC 61784-5-18-20192019-01-02EnglishIndustrial communication networks – Profiles – Part 5-18: Installation of fieldbuses – Installation profiles for CPF 18
328DS DS/EN IEC 61784-5-20-20192019-01-02EnglishIndustrial communication networks – Profiles – Part 5-20: Installation of fieldbuses – Installation profiles for CPF 20
329DS DS/EN IEC 61784-5-21-20192019-01-02EnglishIndustrial communication networks – Profiles – Part 5-21: Installation of fieldbuses – Installation profiles for CPF 21
330DS DS/EN IEC 62351-4-20192019-01-02EnglishPower systems management and associated information exchange – Data and communications security – Part 4: Profiles including MMS and derivatives
331DS DS/HD 60364-7-722-20192019-01-02EnglishLow-voltage electrical installations – Part 7-722: Requirements for special installations or locations – Supplies for electric vehicles
332DS DS/ISO 26262-1-20192019-01-02EnglishRoad vehicles – Functional safety – Part 1: Vocabulary
333DS DS/ISO 26262-2-20192019-01-02EnglishRoad vehicles – Functional safety – Part 2: Management of functional safety
334DS DS/ISO 26262-3-20192019-01-02EnglishRoad vehicles – Functional safety – Part 3: Concept phase
335DS DS/ISO 26262-4-20192019-01-02EnglishRoad vehicles – Functional safety – Part 4: Product development at the system level
336DS DS/ISO 26262-5-20192019-01-02EnglishRoad vehicles – Functional safety – Part 5: Product development at the hardware level
337DS DS/ISO 26262-6-20192019-01-02EnglishRoad vehicles – Functional safety – Part 6: Product development at the software level
338DS DS/ISO 26262-8-20192019-01-02EnglishRoad vehicles – Functional safety – Part 8: Supporting processes
339DS DS/ISO/IEC TR 23186-20192019-01-02EnglishInformation technology – Cloud computing – Framework of trust for processing of multi-sourced data
340DS DS/ISO/TR 22100-4-20192019-01-02EnglishSafety of machinery – Relationship with ISO 12100 – Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects
341DS DS/CEN/TS 17249-2-20192019-01-02EnglishIntelligent transport systems – eSafety – Part 2 : eCall for HGVs and other commercial vehicles
342DS DS/CEN/TS 17201+AC-20192019-01-02EnglishConstruction products: Assessment of release of dangerous substances – Content of inorganic substances – Methods for analysis of aqua regia digests
343DS DS/CEN/TS 17200+AC-20192019-01-02EnglishConstruction products: Assessment of release of dangerous substances – Analysis of inorganic substances in digests and eluates – Analysis by Inductively Coupled Plasma – Mass Spectrometry (ICP-MS)
344DS DS/CEN/TS 17197+AC-20192019-01-02EnglishConstruction products: Assessment of release of dangerous substances – Analysis of inorganic substances in digests and eluates – Analysis by Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES)
345DS DS/ISO/TR 12885-20192019-01-02EnglishNanotechnologies – Health and safety practices in occupational settings
346DS DS/EN 17146-20192019-01-02EnglishDetermination of the strength of infill supports – Test method and requirements
347DS DS/CEN/TS 17273-20192019-01-02EnglishNanotechnologies – Guidance on detection and identification of nano-objects in complex matrices
348DS DS/EN 17138-20192019-01-02EnglishConservation of Cultural Heritage – Methods and materials for cleaning porous inorganic materials
349DS DS/CEN/TS 17275-20192019-01-02EnglishNanotechnologies – Guidelines for the management and disposal of waste from the manufacturing and processing of manufactured nano-objects
350DS DS/EN 17023-20192019-01-02EnglishRailway applications – Railway vehicle maintenance – Creation and modification of maintenance plan
351DS DS/EN 17142-20192019-01-02EnglishModular multilayer floor coverings – Elements with a wood powder based surface layer – Specifications, requirements and test methods
352DS DS/EN ISO 11348-2/A1-20192019-01-02EnglishWater quality – Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) – Part 2: Method using liquid-dried bacteria – Amendment 1 (ISO 11348-2:2007/Amd 1:2018)
353DS DS/ISO 21401-20192019-01-02EnglishTourism and related services – Sustainability management system for accommodation establishments – Requirements
354DS DS/ISO 18192-1/AMD 1-20192019-01-02EnglishImplants for surgery – Wear of total intervertebral spinal disc prostheses – Part 1: Loading and displacement parameters for wear testing and corresponding environmental conditions for test AMENDMENT 1
355DS DS/EN ISO 21183-2-20192019-01-02EnglishLight conveyor belts – Part 2: List of equivalent terms (ISO 21183-2:2018)
356DS DS/EN ISO 20848-3-20192019-01-02EnglishPackaging – Plastics drums – Part 3: Plug bung closure systems for plastics drums with a nominal capacity of 113,6 l to 220 l (ISO 20848-3:2018)
357DS DS/EN ISO 20184-1-20192019-01-02EnglishMolecular in vitro diagnostic examinations – Specifications for pre-examination processes for frozen tissue – Part 1: Isolated RNA (ISO 20184-1:2018)
358DS DS/EN ISO 20166-1-20192019-01-02EnglishMolecular in vitro diagnostic examinations – Specifications for pre-examination processes for formalin-fixed and paraffin-embedded (FFPE) tissue – Part 1: Isolated RNA (ISO 20166-1:2018)
359DS DS/EN ISO 19296-20192019-01-02EnglishMining – Mobile machines working underground – Machine safety (ISO 19296:2018)
360DS DS/EN ISO 13438-20192019-01-02EnglishGeosynthetics – Screening test method for determining the resistance of geotextiles and geotextile-related products to oxidation (ISO 13438:2018)
361DS DS/EN ISO 11348-3/A1-20192019-01-02EnglishWater quality – Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) – Part 3: Method using freeze-dried bacteria – Amendment 1 (ISO 11348-3:2007/Amd 1:2018)
362DS DS/EN ISO 11348-1/A1-20192019-01-02EnglishWater quality – Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) – Part 1: Method using freshly prepared bacteria – Amendment 1 (ISO 11348-1:2007/Amd 1:2018)
363DS DS/EN ISO 6506-2-20192019-01-02EnglishMetallic materials – Brinell hardness test – Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
364DS DS/EN ISO 6145-7-20192019-01-02EnglishGas analysis – Preparation of calibration gas mixtures using dynamic methods – Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
365DS DS/EN 12697-3+A1-20192019-01-02EnglishBituminous mixtures – Test methods – Part 3: Bitumen recovery: Rotary evaporator
366DS DS/EN 12390-10-20192019-01-02EnglishTesting hardened concrete – Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide
367DS DS/EN 12104-20192019-01-02EnglishResilient floor coverings – Cork floor tiles – Specification
368DS DS/EN 1888-1-20192019-01-02EnglishChild care articles – Wheeled child conveyances – Part 1: Pushchairs and prams
369DS DS/EN 1794-1+AC-20192019-01-02EnglishRoad traffic noise reducing devices – Non-acoustic performance – Part 1: Mechanical performance and stability requirements
370DS DS/EN 1300-20192019-01-02EnglishSecure storage units – Classification for high security locks according to their resistance to unauthorized opening
371DS DS/EN 959-20192019-01-02EnglishMountaineering equipment – Rock anchors – Safety requirements and test methods
372DS DS/EN 868-10-20192019-01-02EnglishPackaging for terminally sterilized medical devices – Part 10: Adhesive coated nonwoven materials of polyolefines – Requirements and test methods
373DS DS/EN 868-9-20192019-01-02EnglishPackaging for terminally sterilized medical devices – Part 9: Uncoated nonwoven materials of polyolefines – Requirements and test methods
374DS DS/EN 868-8-20192019-01-02EnglishPackaging for terminally sterilized medical devices – Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 – Requirements and test methods
375DS DS/EN 868-5-20192019-01-02EnglishPackaging for terminally sterilized medical devices – Part 5: Sealable pouches and reels of porous materials and plastic film construction – Requirements and test methods
376DS DS/EN 196-6-20192019-01-02EnglishMethods of testing cement – Part 6: Determination of fineness
377DS DS/EN 148-1-20192019-01-02EnglishRespiratory protective devices – Threads for facepieces – Part 1: Standard thread connection
378DS DS/CWA 17356-20192019-01-02EnglishInteroperability of security systems for the surveillance of widezones
379DS DS/ISO 8994-20182018-12-18EnglishAnodizing of aluminium and its alloys – Rating system for the evaluation of pitting corrosion – Grid method
380DS DS/EN ISO 13257-20182018-12-18EnglishThermoplastics piping systems for non-pressure applications – Test method for resistance to elevated temperature cycling (ISO 13257:2018)
381DS DS/EN ISO 13694-20182018-12-18EnglishOptics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) density distribution (ISO 13694:2018)
382DS DS/EN ISO 15112-20182018-12-18EnglishNatural gas – Energy determination (ISO 15112:2018)
383DS DS/EN ISO 15527-20182018-12-18EnglishPlastics – Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) – Requirements and test methods (ISO 15527:2018)
384DS DS/ISO 9053-1-20182018-12-18EnglishAcoustics – Determination of airflow resistance – Part 1: Static airflow method
385DS DS/EN 2267-010-20182018-12-18EnglishAerospace series – Cables, electrical, for general purpose – Operating temperatures between -55 °C and 260 °C – Part 010: DR family, single UV laser printable – Product standard
386DS DS/EN 2341-20182018-12-18EnglishAerospace series – Aluminium and aluminium alloy – Square and rectangular extruded bars – Dimensions
387DS DS/EN 2450-20182018-12-18EnglishAerospace series – Steel 31Ni10 – 1 230 MPa ≤ Rm ≤ 1 420 MPa – Bars – De ≤ 40 mm
388DS DS/EN 2715-20182018-12-18EnglishAerospace series – Macrographic examination of aluminium and aluminium alloy wrought products, forging stock and forgings
389DS DS/EN ISO 11145-20182018-12-18EnglishOptics and photonics – Lasers and laser-related equipment – Vocabulary and symbols (ISO 11145:2018)
390DS DS/ISO 7176-30-20182018-12-18EnglishWheelchairs – Part 30: Wheelchairs for changing occupant posture – Test methods and requirements
391DS DS/EN 4611-003-20182018-12-18EnglishAerospace series – Cables, electrical, for general purpose, single and multicore assembly – XLETFE Family – Part 003: Tin plated copper – Operating temperatures, between -65 °C and 135 °C – Single extruded wall for enclosed applications – UV l
392DS DS/EN 4165-026-20182018-12-18EnglishAerospace series – Connector, electrical, rectangular, modular – Operating temperature 175 °C continuous – Part 026: Accessories for single module connector – Product standard
393DS DS/EN ISO 11502-20182018-12-18EnglishPlastics – Film and sheeting – Determination of blocking resistance (ISO 11502:2018)
394DS DS/EN ISO 11979-1-20182018-12-18EnglishOphthalmic implants – Intraocular lenses – Part 1: Vocabulary (ISO 11979-1:2018)
395DS DS/EN IEC 62149-10-20182018-12-18EnglishFibre optic active components and devices – Performance standards – Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul
396DS DS/EN ISO 150-20182018-12-18EnglishRaw, refined and boiled linseed oil for paints and varnishes – Specifications and methods of test (ISO 150:2018)
397DS DS/EN 16002-20182018-12-18EnglishFlexible sheets for waterproofing – Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing
398DS DS/EN ISO 3681-20182018-12-18EnglishBinders for paints and varnishes – Determination of saponification value – Titrimetric method (ISO 3681:2018)
399DS DS/EN ISO 527-3-20182018-12-18EnglishPlastics – Determination of tensile properties – Part 3: Test conditions for films and sheets (ISO 527-3:2018)
400DS DS/EN 16436-2-20182018-12-18EnglishRubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase – Part 2: Assemblies
401DS DS/ISO/IEC 23270-20182018-12-18EnglishInformation technology – Programming languages – C#
402DS DS/CEN/TS 17165-20182018-12-18EnglishLight and lighting – Lighting system design process
403DS DS/EN 50341-2-20-20182018-12-18EnglishOverhead electrical lines exceeding AC 1 kV – Part 2-20: National Normative Aspects (NNA) for ESTONIA (based on EN 50341-1:2012)
404DS DS/CEN/TS 17261-20182018-12-18EnglishBiometric authentication for critical infrastructure access control – Requirements and Evaluation
405DS DS/CEN/TS 17268-20182018-12-18EnglishIntelligent transport systems – ITS spatial data – Data exchange on changes in road attributes
406DS DS/CEN/TS 17274-20182018-12-18EnglishNanotechnologies – Guidelines for determining protocols for the explosivity and flammability of powders containing nano-objects (for transport, handling and storage)
407DS DS/EN 513-20182018-12-18EnglishPlastics – Poly(vinyl chloride) (PVC) based profiles – Determination of the resistance to artificial weathering
408DS DS/EN ISO 9053-1-20182018-12-18EnglishAcoustics – Determination of airflow resistance – Part 1: Static airflow method (ISO 9053-1:2018)
409DS DS/EN ISO 8994-20182018-12-18EnglishAnodizing of aluminium and its alloys – Rating system for the evaluation of pitting corrosion – Grid method (ISO 8994:2018)
410DS DS/EN ISO 8504-3-20182018-12-18EnglishPreparation of steel substrates before application of paints and related products – Surface preparation methods – Part 3: Hand- and power-tool cleaning (ISO 8504-3:2018)
411DS DS/CLC/TR 60079-32-1-20182018-12-18EnglishExplosive atmospheres – Part 32-1: Electrostatic hazards, guidance
412DS DS/EN ISO/IEC 17021-3-20182018-12-18EnglishConformity assessment – Requirements for bodies providing audit and certification of management systems – Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC 17021-3:2017)
413DS DS/IEC 60479-1-20182018-12-18EnglishEffects of current on human beings and livestock – Part 1: General aspects
414DS DS/IEC TR 60601-4-3-20182018-12-18EnglishMedical electrical equipment – Part 4-3: Guidance and interpretation – Considerations of unaddressed safety aspects in the third edition of IEC 60601-1 and proposals for new requirements
415DS DS/ISO/TR 20489-20182018-12-18EnglishNanotechnologies – Sample preparation for the characterization of metal and metal-oxide nano-objects in water samples
416DS DS/EN 50341-2-12-20182018-12-18EnglishOverhead electrical lines exceeding AC 1 kV – Part 2-12: National Normative Aspects (NNA) for ICELAND (based on EN 50341-1:2012)
417DS DS/EN 9107-20182018-12-18EnglishAerospace series – Quality systems – Direct Delivery Authorization – Guidance for Aerospace Companies
418DS DS/EN 4856-20182018-12-18EnglishRotorcraft – Emergency Breathing Systems (EBS) – Requirements, testing and marking
419DS DS/ISO/TS 16195-20182018-12-18EnglishNanotechnologies – Specification for developing representative test materials consisting of nano-objects in dry powder form
420DS DS/EN 12310-2-20182018-12-18EnglishFlexible sheets for waterproofing – Determination of resistance to tearing – Part 2: Plastic and rubber sheets for roof waterproofing
421DS DS/ETSI EN 300 700 V2.2.1-20182018-12-18EnglishDigital Enhanced Cordless Telecommunications (DECT); Wireless Relay Station (WRS)
422DS DS/EN ISO/IEC 17021-2-20182018-12-18EnglishConformity assessment – Requirements for bodies providing audit and certification of management systems – Part 2: Competence requirements for auditing and certification of environmental management systems (ISO/IEC 17021-2:2016)
423DS DS/EN 12966+A1-20182018-12-17EnglishRoad vertical signs – Variable message traffic signs
424DS DS/EN 12277+A1-20182018-12-17EnglishMountaineering equipment – Harnesses – Safety requirements and test methods
425DS DS/HD 60364-5-56-20182018-12-17EnglishLow-voltage electrical installations – Part 5-56: Selection and erection of electrical equipment – Safety services
426DS DS/EN ISO 24342-20182018-12-17EnglishResilient and textile floor-coverings – Determination of side length, edge straightness and squareness of tiles (ISO 24342:2018)
427DS DS/IEC 61935-1-2-20182018-12-17EnglishSpecification for the testing of balanced and coaxial information technology cabling – Part 1-2: Installed balanced cabling as specified in ISO/IEC 11801 – Additional requirements for measurement of resistance unbalance with field test instrum
428DS DS/EN ISO 22477-1-20182018-12-17EnglishGeotechnical investigation and testing – Testing of geotechnical structures – Part 1: Testing of piles: static compression load testing (ISO 22477-1:2018)
429DS DS/EN ISO 21083-1-20182018-12-17EnglishTest method to measure the efficiency of air filtration media against spherical nanomaterials – Part 1: Size range from 20 nm to 500 nm (ISO 21083-1:2018)
430DS DS/EN ISO 21012-20182018-12-17EnglishCryogenic vessels – Hoses (ISO 21012:2018)
431DS DS/EN 62784-20182018-12-17EnglishVacuum cleaners and dust extractors providing equipment protection level Dc for the collection of combustible dusts – Particular requirements
432DS DS/EN 17156-20182018-12-17EnglishCosmetics – Analytical methods – LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU
433DS DS/EN 17125-20182018-12-17EnglishDomestic spas/whirlpool spas/hot tubs – Safety requirements and test methods
434DS DS/EN 17123-20182018-12-17EnglishWater quality – Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters
435DS DS/EN 14825-20182018-12-17EnglishAir conditioners, liquid chilling packages and heat pumps, with electrically driven compressors, for space heating and cooling – Testing and rating at part load conditions and calculation of seasonal performance
436DS DS/EN 14067-4+A1-20182018-12-17EnglishRailway applications – Aerodynamics – Part 4: Requirements and test procedures for aerodynamics on open track
437DS DS/EN 13203-5-20182018-12-17EnglishGas-fired domestic appliances producing hot water – Part 5: Assessment of energy consumption of gas-fired appliances combined with electrical heat pump
438DS DS/EN 12716-20182018-12-17EnglishExecution of special geotechnical work – Jet grouting
439DS DS/EN ISO 14906-20182018-12-17EnglishElectronic fee collection – Application interface definition for dedicated short-range communication (ISO 14906:2018)
440DS DS/EN ISO 20184-2-20182018-12-17EnglishMolecular in vitro diagnostic examinations – Specifications for pre-examination processes for frozen tissue – Part 2: Isolated proteins (ISO 20184-2:2018)
441DS DS/EN 1081-20182018-12-17EnglishResilient, laminate and modular multilayer floor coverings – Determination of the electrical resistance
442DS DS/EN ISO 16407-2-20182018-12-17EnglishElectronic fee collection – Evaluation of equipment for conformity to ISO 17575-1 – Part 2: Abstract test suite (ISO 16407-2:2018)
443DS DS/EN ISO 11704-20182018-12-17EnglishWater quality – Gross alpha and gross beta activity – Test method using liquid scintillation counting (ISO 11704:2018)
444DS DS/EN ISO 16410-2-20182018-12-17EnglishElectronic fee collection – Evaluation of equipment for conformity to ISO 17575-3 – Part 2: Abstract test suite (ISO 16410-2:2018)
445DS DS/EN ISO 18497-20182018-12-17EnglishAgricultural machinery and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497:2018)
446DS DS/EN ISO 20685-1-20182018-12-17English3-D scanning methodologies for internationally compatible anthropometric databases – Part 1: Evaluation protocol for body dimensions extracted from 3-D body scans (ISO 20685-1:2018)
447DS DS/EN ISO 4619-20182018-12-17EnglishDriers for paints and varnishes (ISO 4619:2018)
448DS DS/EN 15595-20182018-12-17EnglishRailway applications – Braking – Wheel slide protection
449DS DS/EN ISO 6158-20182018-12-17EnglishMetallic and other inorganic coatings – Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2018)
450DS DS/EN ISO 7779-20182018-12-17EnglishAcoustics – Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2018)
451DS DS/EN 16925-20182018-12-17EnglishFixed firefighting systems – Automatic residential sprinkler systems – Design, installation and maintenance
452DS DS/EN 16929-20182018-12-17EnglishTest methods – Timber floors – Determination of vibration properties
453DS DS/EN 17075-20182018-12-17EnglishWater quality – General requirements and performance test procedures for water monitoring equipment – Measuring devices
454DS DS/ISO/IEC/IEEE 26515-20182018-12-17EnglishSystems and software engineering – Developing information for users in an agile environment
455DS DS/ISO/IEC/IEEE 26511-20182018-12-17EnglishSystems and software engineering – Requirements for managers of information for users of systems, software, and services
456DS DS/EN 71-14-20182018-12-17EnglishSafety of toys – Part 14: Trampolines for domestic use
457DS DS/EN 772-22-20182018-12-17EnglishMethods of test for masonry units – Part 22: Determination of freeze/thaw resistance of clay masonry units
458DS DS/ISO/IEC 19086-2-20182018-12-17EnglishCloud computing – Service level agreement (SLA) framework – Part 2: Metric model
459DS DS/EN ISO 2812-2-20182018-12-17EnglishPaints and varnishes – Determination of resistance to liquids – Part 2: Water immersion method (ISO 2812-2:2018)
460DS DS/EN 388+A1-20182018-12-17EnglishProtective gloves against mechanical risks
461DS DS/EN ISO 472/A1-20182018-12-17EnglishPlastics – Vocabulary – Amendment 1: Additional items (ISO 472:2013/Amd 1:2018)
462DS DS/ISO/IEC/IEEE 24748-2-20182018-12-17EnglishSystems and software engineering – Life cycle management – Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (System life cycle processes)
463DS DS/EN 707-20182018-12-17EnglishAgricultural machinery – Slurry tankers – Safety
464DS DS/EN 15399-20182018-12-17EnglishGas infrastructure – Safety Management System for Gas Networks with maximum operting pressure up to and including 16 bar
465DS DS/EN 16777-20182018-12-17EnglishChemical disinfectants and antiseptics – Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area – Test method and requirements (phase 2/step 2)
466DS DS/EN 16842-3-20182018-12-17EnglishPowered industrial trucks – Visibility – Test methods and verification – Part 3: Reach trucks up to and including 10 000 kg capacity
467DS DS/EN 17037-20182018-12-17EnglishDaylight in buildings
468DS DS/ISO/IEC 20924-20182018-12-14EnglishInternet of Things (IoT) – Vocabulary
469DS DS/ISO 14820-1-20182018-12-12EnglishFertilizers and liming materials – Sampling and sample preparation – Part 1: Sampling
470DS DS/ISO 18250-1-20182018-12-10EnglishMedical devices – Connectors for reservoir delivery systems for healthcare applications – Part 1: General requirements and common test methods
471DS DS/ISO 13779-3-20182018-12-10EnglishImplants for surgery – Hydroxyapatite – Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity
472DS DS/ISO 13779-2-20182018-12-10EnglishImplants for surgery – Hydroxyapatite – Part 2: Thermally sprayed coatings of hydroxyapatite
473DS DS/EN 1708-2-20182018-12-10EnglishWelding – Basic weld joint details in steel – Part 2: Non internal pressurized components
474DS DS/ISO 18639-5-20182018-12-10EnglishPPE ensembles for firefighters undertaking specific rescue activities – Part 5: Helmet
475DS DS/EN 1307+A3-20182018-12-10EnglishTextile floor coverings – Classification
476DS DS/EN ISO 10634-20182018-12-10EnglishWater quality – Preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO 10634: 2018)
477DS DS/ISO 5894-20182018-12-10EnglishShips and marine technology – Manholes with bolted covers
478DS DS/EN ISO 20023-20182018-12-10EnglishSolid biofuels – Safety of solid biofuel pellets – Safe handling and storage of wood pellets in residential and other small-scale applications (ISO 20023:2018)
479DS DS/EN ISO 11299-1-20182018-12-10EnglishPlastics piping systems for renovation of underground gas supply networks – Part 1: General (ISO 11299-1:2018)
480DS DS/EN 1011-6-20182018-12-10EnglishWelding – Recommendation for welding of metallic materials – Part 6: Laser beam welding
481DS DS/EN ISO 11299-2-20182018-12-10EnglishPlastics piping systems for renovation of underground gas supply networks – Part 2: Lining with continuous pipes (ISO 11299-2:2018)
482DS DS/EN ISO 11299-3-20182018-12-10EnglishPlastics piping systems for renovation of underground gas supply networks – Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
483DS DS/EN 1011-3-20182018-12-10EnglishWelding – Recommendations for welding of metallic materials – Part 3: Arc welding of stainless steels
484DS DS/ISO 13779-4-20182018-12-10EnglishImplants for surgery – Hydroxyapatite – Part 4: Determination of coating adhesion strength
485DS DS/EN 993-6-20182018-12-10EnglishMethods of test for (dense) shaped refractory products – Part 6: Determination of modulus of rupture at ambient temperature
486DS DS/EN 993-5-20182018-12-10EnglishMethods of test for dense shaped refractory products – Part 5: Determination of cold crushing strength
487DS DS/EN ISO 15681-2-20182018-12-10EnglishWater quality – Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) – Part 2: Method by continuous flow analysis (CFA) (ISO 15681-2:2018)
488DS DS/EN 993-1-20182018-12-10EnglishMethods of test for dense shaped refractory products – Part 1: Determination of bulk density, apparent porosity and true porosity
489DS DS/EN 913-20182018-12-10EnglishGymnastic equipment – General safety requirements and test methods
490DS DS/ISO/TR 21245-20182018-12-10EnglishRailway applications – Railway project planning process – Guidance on railway project planning
491DS DS/EN 17126-20182018-12-10EnglishChemical disinfectants and antiseptics – Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area – Test method and requirements (phase 2, step 1)
492DS DS/EN 50470-3/A1-20182018-12-10EnglishElectricity metering equipment (a.c.) – Part 3: Particular requirements – Static meters for active energy (class indexes A, B and C)
493DS DS/EN 14587-1-20182018-12-10EnglishRailway applications – Infrastructure – Flash butt welding of new rails – Part 1: R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails in a fixed plant
494DS DS/EN 50470-2/A1-20182018-12-10EnglishElectricity metering equipment (a.c.) – Part 2: Particular requirements – Electromechanical meters for active energy (class indexes A and B)
495DS DS/EN 17116-2-20182018-12-10EnglishSpecifications for industrial laundry machines – Definitions and testing of capacity and consumption characteristics – Part 2: Batch drying tumblers
496DS DS/EN 50470-1/A1-20182018-12-10EnglishElectricity metering equipment (a.c.) – Part 1: General requirements, tests and test conditions – Metering equipment (class indexes A, B and C)
497DS DS/ISO/TS 20399-2-20182018-12-10EnglishBiotechnology – Ancillary materials present during the production of cellular therapeutic products – Part 2: Best practice guidance for ancillary material suppliers
498DS DS/EN 12193-20182018-12-10EnglishLight and lighting – Sports lighting
499DS DS/EN 13203-2-20182018-12-10EnglishGas-fired domestic appliances producing hot water – Part 2: Assessment of energy consumption
500DS DS/ISO/TS 20399-3-20182018-12-10EnglishBiotechnology – Ancillary materials present during the production of cellular therapeutic products – Part 3: Best practice guidance for ancillary material users