| Pos | standard Number | publication date | Language | Description |
| 1 | DIN EN 16789-2016 | 2016-12-01 | German | Ambient air - Biomonitoring with Higher Plants - Method of the standardized tobacco exposure; German version EN 16789:2016 |
| 2 | DIN 58239-2-2016 | 2016-12-01 | German | Medical instruments - Tissue forceps - Part 2: Curved |
| 3 | DIN 51460-2-2016 | 2016-12-01 | German | Testing of petroleum products - Method for sample preparation - Part 2: Incineration/oxide ash |
| 4 | DIN 19539-2016 | 2016-12-01 | German | Investigation of solids - Temperature-dependent differentiation of total carbon (TOC400, ROC, TIC900) |
| 5 | DIN EN 13160-4-2016 | 2016-12-01 | German | Leak detection systems - Part 4: Requirements and test/assessment methods for sensor based leak detection systems; German version EN 13160-4:2016 |
| 6 | DIN ISO 9022-1-2016 | 2016-12-01 | German | Optics and photonics - Environmental test methods - Part 1: Definitions, extent of testing (ISO 9022-1:2016) |
| 7 | DIN ISO 19600-2016 | 2016-12-01 | German | Compliance management systems - Guidelines (ISO 19600:2014) |
| 8 | DIN EN ISO 11210-2016 | 2016-12-01 | German | Jewellery - Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:2014); German version EN ISO 11210:2016 |
| 9 | DIN EN ISO 11816-2-2016 | 2016-12-01 | German | Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorimetric method for cheese (ISO 11816-2:2016); German version EN ISO 11816-2:2016 |
| 10 | DIN 30902-2016 | 2016-12-01 | German | Heat treatment of ferrous materials - Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts |
| 11 | DIN EN 16272-4-2016 | 2016-12-01 | German | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In situ values of sound diffraction under direct sound fiel |
| 12 | DIN ISO 9022-23-2016 | 2016-12-01 | German | Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat (ISO 9022-23:2016) |
| 13 | DIN EN ISO 16994-2016 | 2016-12-01 | German | Solid biofuels - Determination of total content of sulfur and chlorine (ISO 16994:2016); German version EN ISO 16994:2016 |
| 14 | DIN 13019-2016 | 2016-12-01 | German | Adhesives for first aid - Dimensions |
| 15 | DIN EN 13160-6-2016 | 2016-12-01 | German | Leak detection systems - Part 6: Sensors in monitoring wells; German version EN 13160-6:2016 |
| 16 | DIN EN ISO 17701-2016 | 2016-12-01 | German | Footwear - Test methods for uppers, lining and insocks - Colour migration (ISO 17701:2016); German version EN ISO 17701:2016 |
| 17 | DIN 13191-2016 | 2016-12-01 | German | Medical instruments - Rongeur type Stille |
| 18 | DIN EN 14037-3-2016 | 2016-12-01 | German | Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 3: Prefabricated ceiling mounted radiant panels for space heating- Rating method and evaluation of radiant thermal output; German version EN 14037-3:2016 |
| 19 | DIN 51819-2-2016 | 2016-12-01 | German | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 2: Test method for lubricating greases - applied test bearing: oblique ball bearing or tapered roller bearing |
| 20 | DIN 13460-2016 | 2016-12-01 | German | Medical instruments - Needle holder type Heaney |
| 21 | DIN 30901-2016 | 2016-12-01 | German | Heat treatment of ferrous materials - Determination of the depth and form of appearance of the internal oxidation |
| 22 | DIN 10161-2016 | 2016-12-01 | German | Microbiological analysis of meat and meat products - Aerobic count at 30 °C - Drop plating method |
| 23 | DIN EN 16175-2-2016 | 2016-12-01 | German | Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS); German version EN 16175-2:2016 |
| 24 | DIN 55402-2-2016 | 2016-12-01 | German | Packaging - Marking for shipping of packages - Part 2: Directive for export packaging |
| 25 | DIN EN 1794-3-2016 | 2016-12-01 | German | Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification; German version EN 1794-3:2016 |
| 26 | DIN EN 12566-4-2016 | 2016-12-01 | German | Small wastewater treatment systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits; German version EN 12566-4:2016 |
| 27 | DIN 5881-1-2016 | 2016-12-01 | German | Petroleum industry - Wire ropes and rope reeving - Part 1: Wire ropes |
| 28 | DIN EN 1765-2016 | 2016-12-01 | German | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies; German version EN 1765:2016 |
| 29 | DIN EN ISO 14574-2016 | 2016-12-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties (ISO 14574:2013); German version EN ISO 14574:2016 |
| 30 | DIN 267-30-2016 | 2016-12-01 | German | Fasteners - Technical specifications - Part 30: Metric thread rolling screws of property class 10.9 |
| 31 | DIN EN ISO 10328-2016 | 2016-12-01 | German | Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2016); German version EN ISO 10328:2016 |
| 32 | DIN EN 1914-2016 | 2016-12-01 | German | Inland navigation vessels - Work boats, ships boats and lifeboats; German version EN 1914:2016 |
| 33 | DIN 4000-179-2016 | 2016-12-01 | German | Tabular layouts of properties - Part 179: Deburring tools |
| 34 | DIN 5405-3-2016 | 2016-12-01 | German | Rolling bearings - Needle roller bearings - Part 3: Thrust washers |
| 35 | DIN EN ISO 3677-2016 | 2016-12-01 | German | Filler metal for soldering and brazing - Designation (ISO 3677:2016); German version EN ISO 3677:2016 |
| 36 | DIN 13122-2016 | 2016-12-01 | German | Medical instruments - Tenaculum forceps 1 × 1 teeth, straight |
| 37 | DIN CEN/CLC ISO/IEC/TS 17021-3-2016 | 2016-12-01 | German,English | Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems (ISO/IEC/TS 17021-3:2013); German and English version CE |
| 38 | DIN 10759-2016 | 2016-12-01 | German | Analysis of honey - Determination of saccharase activity - Siegenthaler method |
| 39 | DIN EN ISO 21013-3-2016 | 2016-12-01 | German | Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:2016); German version EN ISO 21013-3:2016 |
| 40 | DIN EN 12566-1-2016 | 2016-12-01 | German | Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks; German version EN 12566-1:2016 |
| 41 | DIN ISO 9022-9-2016 | 2016-12-01 | German | Optics and photonics - Environmental test methods - Part 9: Solar radiation and weathering (ISO 9022-9:2016) |
| 42 | DIN 18864-2016 | 2016-12-01 | German | Equipment for commercial kitchens - Heat-insulated container for food transport, requirements and testing |
| 43 | DIN EN 13252-2016 | 2016-12-01 | German | Geotextiles and geotextile-related products - Characteristics required for use in drainage systems; German version EN 13252:2016 |
| 44 | DIN EN 16774-2016 | 2016-12-01 | German | Safety of machinery - Safety requirements for steel converter and associated equipment; German version EN 16774:2016 |
| 45 | DIN EN 845-1-2016 | 2016-12-01 | German | Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets; German version EN 845-1:2013+A1:2016 |
| 46 | DIN EN ISO 7784-2-2016 | 2016-12-01 | German | Paints and varnishes - Determination of resistance to abrasion - Part 2: Method with abrasive rubber wheels and rotating test specimen (ISO 7784-2:2016); German version EN ISO 7784-2:2016 |
| 47 | DIN EN ISO 14253-5-2016 | 2016-12-01 | German | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015 |
| 48 | DIN 19698-2-2016 | 2016-12-01 | German | Characterization of solids - Sampling of solid and semi-solid materials - Part 2: Guidance for taking samples of stockpiles for integral characterisation |
| 49 | DIN EN ISO 25178-1-2016 | 2016-12-01 | German | Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016); German version EN ISO 25178-1:2016 |
| 50 | DIN EN 12566-3-2016 | 2016-12-01 | German | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants; German version EN 12566-3:2016 |
| 51 | DIN EN ISO/IEC 30121-2016 | 2016-12-01 | German | Information technology - Governance of digital forensic risk framework (ISO/IEC 30121:2015); German version EN ISO/IEC 30121:2016 |
| 52 | DIN EN 14112-2016 | 2016-12-01 | German | Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of oxidation stability (accelerated oxidation test); German version EN 14112:2016 |
| 53 | DIN 637-2016 | 2016-12-01 | German,English | Rolling bearings - Safety regulations for dimensioning and operation of profiled rail guides with recirculating rolling elements; Text in German and English |
| 54 | DIN EN ISO 7784-3-2016 | 2016-12-01 | German | Paints and varnishes - Determination of resistance to abrasion - Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen (ISO 7784-3:2016); German version EN ISO 7784-3:2016 |
| 55 | DIN EN 599-2-2016 | 2016-12-01 | German | Durability of wood and wood-based products - Efficacy of preventive wood preservatives as determined by biological tests - Part 2: Labelling; German version EN 599-2:2016 |
| 56 | DIN EN ISO 11111-5-2016 | 2016-12-01 | German | Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005 + Amd 1:2009 + Amd 2:2016); German version EN ISO 11111-5:2005 + A1:2009 + A2:2016 |
| 57 | DIN EN ISO 18403-2016 | 2016-12-01 | German | Footwear - Test methods for slide fasteners - Resistance to damage during closure under a lateral force (ISO 18403:2016); German version EN ISO 18403:2016 |
| 58 | DIN 5881-2-2016 | 2016-12-01 | German | Petroleum industry - Wire ropes and rope reeving - Part 2: Rope reeving |
| 59 | DIN 13465-2016 | 2016-12-01 | German | Medical instruments - Haemostatic forceps type Adson |
| 60 | DIN 13190-2016 | 2016-12-01 | German | Medical instruments - Bone cutting forceps type Liston |
| 61 | DIN EN 13869-2016 | 2016-12-01 | German | Lighters - Child safety requirements for lighters - Safety requirements and test methods; German version EN 13869:2016 |
| 62 | DIN 13073-2016 | 2016-12-01 | German | Rescue systems - Dimensions for maintain systems for fastening of undercarriage and stretcher in ambulances |
| 63 | DIN 644-2016 | 2016-12-01 | German | Linear motion rolling bearings - Flat cage rail guide - Dimensions and tolerances |
| 64 | DIN EN ISO 105-G01-2016 | 2016-12-01 | German | Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016); German version EN ISO 105-G01:2016 |
| 65 | DIN 58249-2016 | 2016-12-01 | German | Medical instruments - Retractors type Weitlaner |
| 66 | DIN 4000-178-2016 | 2016-12-01 | German | Tabular layouts of properties - Part 178: Probing systems, stylus systems and styli |
| 67 | DIN EN 764-1-2016 | 2016-12-01 | German | Pressure equipment - Part 1: Vocabulary; German version EN 764-1:2015+A1:2016 |
| 68 | DIN EN 14582-2016 | 2016-12-01 | German | Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods; German version EN 14582:2016 |
| 69 | DIN EN ISO 24504-2016 | 2016-12-01 | German | Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014); German version EN ISO 24504:2016 |
| 70 | DIN EN 845-3-2016 | 2016-12-01 | German | Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork; German version EN 845-3:2013+A1:2016 |
| 71 | DIN EN ISO 11243-2016 | 2016-12-01 | German | Cycles - Luggage carriers for bicycles - Requirements and test methods (ISO 11243:2016); German version EN ISO 11243:2016 |
| 72 | DIN 18867-8-2016 | 2016-12-01 | German | Equipment for commercial kitchens - Mobile equipment - Part 8: Castors (Wheels), Requirements and testing |
| 73 | DIN EN 14037-1-2016 | 2016-12-01 | German | Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements; German version EN 14037-1:2016 |
| 74 | DIN 95-2016 | 2016-12-01 | German | Slotted raised countersunk (oval) head wood screws |
| 75 | DIN EN ISO 19429-2016 | 2016-12-01 | German | Dentistry - Designation system for dental implants (ISO 19429:2015); German version EN ISO 19429:2016 |
| 76 | DIN 65358-2016 | 2016-12-01 | German | Aerospace series - Testing of locking torques for nuts and related threaded parts - With ISO metric screw thread, test bolts |
| 77 | DIN EN 12953-3-2016 | 2016-12-01 | German | Shell boilers - Part 3: Design and calculation for pressure parts; German version EN 12953-3:2016 |
| 78 | DIN EN 62047-26-2016 | 2016-12-01 | German | Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures (IEC 62047-26:2016); German version EN 62047-26:2016 |
| 79 | DIN 51819-1-2016 | 2016-12-01 | German | Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles |
| 80 | DIN EN 50289-1-17-2016 | 2016-12-01 | German | Communication cables - Specifications for test methods - Part 1-17: Electrical test methods - Exogenous Crosstalk ExNEXT and ExFEXT; German version EN 50289-1-17:2015 |
| 81 | DIN CEN/TR 16928-2016 | 2016-12-01 | German | Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering; German version CEN/TR 16928:2016 |
| 82 | DIN EN ISO 6009-2016 | 2016-12-01 | German | Hypodermic needles for single use - Colour coding for identification (ISO 6009:2016); German version EN ISO 6009:2016 |
| 83 | DIN EN 1015-12-2016 | 2016-12-01 | German | Methods of test for mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates; German version EN 1015-12:2016 |
| 84 | DIN EN ISO 10139-2-2016 | 2016-12-01 | German | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016); German version EN ISO 10139-2:2016 |
| 85 | DIN 58236-2-2016 | 2016-12-01 | German | Medical instruments - Needle holder type Mathieu - Part 2: With carbide inserts |
| 86 | DIN 13192-2016 | 2016-12-01 | German | Medical instruments - Rongeur type Ruskin |
| 87 | DIN ISO 10110-11-2016 | 2016-12-01 | German | Optics and photonics - Preparation of drawings for optical elements and systems - Part 11: Non-toleranced data (ISO 10110-11:2016) |
| 88 | DIN ISO 14289-1-2016 | 2016-12-01 | German | Document management applications - Electronic document file format enhancement for accessibility - Part 1: Use of ISO 32000-1 (PDF/UA-1) (ISO 14289-1:2014) |
| 89 | DIN EN 16865-2016 | 2016-12-01 | German | Inland navigation vessels - Connections and assembled hoses for the transfer of potable water; German version EN 16865:2016 |
| 90 | DIN ISO 2267-2016 | 2016-12-01 | German | Surface active agents - Evaluation of certain effects of laundering - Methods of preparation and use of unsoiled cotton control cloth (ISO 2267:1986) |
| 91 | DIN 18919-2016 | 2016-12-01 | German | Vegetation technology in landscaping - Care of vegetation during development and maintenance in green areas |
| 92 | DIN 13468-2016 | 2016-12-01 | German | Medical instruments - Sponge holding forceps type Foerster |
| 93 | DIN 14584-2016 | 2016-12-01 | German | Fire fighting vehicles - Pull devices with mechanical drive - Requirements, test methods |
| 94 | DIN EN 61189-3-719-2016 | 2016-12-01 | German | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3-719: Test methods for interconnection structures (printed boards) - Monitoring of single plated-through hole (PTH) resistance change during |
| 95 | DIN EN 13204-2016 | 2016-12-01 | German | Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements; German version EN 13204:2016 |
| 96 | DIN EN ISO 19076-2016 | 2016-12-01 | German | Leather - Measurement of leather surface - Using electronic techniques (ISO 19076:2016); German version EN ISO 19076:2016 |
| 97 | DIN EN ISO 17450-3-2016 | 2016-12-01 | German | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016); German version EN ISO 17450-3:2016 |
| 98 | DIN 1986-100-2016 | 2016-12-01 | German | Drainage systems on private ground - Part 100: Specifications in relation to DIN EN 752 and DIN EN 12056 |
| 99 | DIN EN 13108-5-2016 | 2016-12-01 | German | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt; German version EN 13108-5:2016 |
| 100 | DIN EN 13108-1-2016 | 2016-12-01 | German | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; German version EN 13108-1:2016 |
| 101 | DIN EN 14411-2016 | 2016-12-01 | German | Ceramic tiles - Definition, classification, characteristics, assessment and verification of constancy of performance and marking; German version EN 14411:2016 |
| 102 | DIN EN 14037-4-2016 | 2016-12-01 | English | Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity |
| 103 | DIN EN 16942-2016 | 2016-12-01 | German | Fuels - Identification of vehicle compatibility - Graphical expression for consumer information; German version EN 16942:2016 |
| 104 | DIN EN 13501-4-2016 | 2016-12-01 | German | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems; German version EN 13501-4:2016 |
| 105 | DIN EN 54-31-2016 | 2016-12-01 | English | Fire detection and fire alarm systems - Part 31: Multi-sensor fire detectors - Point detectors using a combination of smoke, carbon monoxide and optionally heat sensors (includes Amendment A1:2016) |
| 106 | DIN EN 14037-4-2016 | 2016-12-01 | German | Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 4: Pre-fabricated ceiling mounted radiant panels - Test method for cooling capacity; German version EN 14037-4:2016 |
| 107 | DIN EN 13108-20-2016 | 2016-12-01 | German | Bituminous mixtures - Material specifications - Part 20: Type Testing; German version EN 13108-20:2016 |
| 108 | DIN EN 13501-4-2016 | 2016-12-01 | English | Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems |
| 109 | DIN EN 14179-1-2016 | 2016-12-01 | German | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1: Definition and description; German version EN 14179-1:2016 |
| 110 | DIN EN 13501-5-2016 | 2016-12-01 | English | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| 111 | DIN EN 15308-2016 | 2016-12-01 | German | Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection; German version EN 15308:2016 |
| 112 | DIN EN 13501-5-2016 | 2016-12-01 | German | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests; German version EN 13501-5:2016 |
| 113 | DIN EN ISO 16773-2-2016 | 2016-12-01 | English | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 2: Collection of data (ISO 16773-2:2016) |
| 114 | DIN EN ISO 16773-3-2016 | 2016-12-01 | English | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 3: Processing and analysis of data from dummy cells (ISO 16773-3:2016) |
| 115 | DIN EN ISO 16773-1-2016 | 2016-12-01 | English | Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens - Part 1: Terms and definitions (ISO 16773-1:2016) |
| 116 | DIN EN ISO 4759-3-2016 | 2016-12-01 | English | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| 117 | DIN EN 13501-2-2016 | 2016-12-01 | German | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services; German version EN 13501-2:2016 |
| 118 | DIN EN ISO 1514-2016 | 2016-12-01 | German | Paints and varnishes - Standard panels for testing (ISO 1514:2016); German version EN ISO 1514:2016 |
| 119 | DIN EN ISO 4623-2-2016 | 2016-12-01 | German | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016); German version EN ISO 4623-2:2016 |
| 120 | DIN 50100-2016 | 2016-12-01 | German | Load controlled fatigue testing - Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components |
| 121 | DIN EN 14351-1-2016 | 2016-12-01 | German | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets; German version EN 14351-1:2006+A2:2016 |
| 122 | DIN ISO 2137-2016 | 2016-12-01 | German | Petroleum products and lubricants - Determination of cone penetration of lubricating greases and petrolatum (ISO 2137:2007) |
| 123 | DIN EN 61094-5-2016 | 2016-12-01 | German | Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2016); German version EN 61094-5:2016 |
| 124 | DIN EN 13451-1-2016 | 2016-12-01 | German | Swimming pool equipment - Part 1: General safety requirements and test methods; German version EN 13451-1:2011+A1:2016 |
| 125 | DIN EN 350-2016 | 2016-12-01 | German | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials; German version EN 350:2016 |
| 126 | DIN 609-2016 | 2016-12-01 | English | Hexagon fits bolts with long thread |
| 127 | DIN EN 13501-2-2016 | 2016-12-01 | English | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| 128 | DIN EN ISO 4126-1-2016 | 2016-12-01 | English | Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013 + Amd 1:2016) (includes Amendment A1:2016) |
| 129 | DIN EN ISO 17296-4-2016 | 2016-12-01 | English | Additive manufacturing - General principles - Part 4: Overview of data processing (ISO 17296-4:2014) |
| 130 | DIN 1999-100-2016 | 2016-12-01 | German | Installations for separation of light liquids - Part 100: Application provisions for installations for separation of light liquids in accordance with DIN EN 858-1 and DIN EN 858-2 |
| 131 | DIN 4150-3-2016 | 2016-12-01 | German | Vibrations in buildings - Part 3: Effects on structures |
| 132 | DIN EN ISO 11664-6-2016 | 2016-12-01 | German | Colorimetry - Part 6: CIEDE2000 Colour-difference formula (ISO/CIE 11664-6:2014); German version EN ISO 11664-6:2016 |
| 133 | DIN EN ISO 11664-6-2016 | 2016-12-01 | English | Colorimetry - Part 6: CIEDE2000 Colour-difference formula (ISO/CIE 11664-6:2014) |
| 134 | DIN 7516-2016 | 2016-12-01 | German | Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing |
| 135 | DIN EN 12602-2016 | 2016-12-01 | English | Prefabricated reinforced components of autoclaved aerated concrete |
| 136 | DIN 21057-1-2016 | 2016-12-01 | German | Pipe classes for process plants - Part 1: General - General principles for creating pipe classes |
| 137 | DIN 21057-5-2016 | 2016-12-01 | German | Pipe classes for process plants - Part 5: Technical delivery conditions for tube parts - Reinforced nozzles |
| 138 | DIN EN ISO 4590-2016 | 2016-12-01 | German | Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016); German version EN ISO 4590:2016 |
| 139 | DIN 318-2016 | 2016-12-01 | English | Fasteners - Wing screws - Edged wings |
| 140 | DIN EN 764-1-2016 | 2016-12-01 | English | Pressure equipment - Part 1: Vocabulary (includes Amendment A1:2016) |
| 141 | DIN EN ISO 6976-2016 | 2016-12-01 | German | Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016); German version EN ISO 6976:2016 |
| 142 | DIN 571-2016 | 2016-12-01 | German | Hexagon head wood screws |
| 143 | DIN 316-2016 | 2016-12-01 | English | Fasteners - Wing screws - Rounded wings |
| 144 | DIN EN 15220-2016 | 2016-12-01 | English | Railway applications - Brake indicators |
| 145 | DIN EN ISO 18744-2016 | 2016-12-01 | German | Microbiology of the food chain - Detection and enumeration of Cryptosporidium and Giardia in fresh leafy green vegetables and berry fruits (ISO 18744:2016); German version EN ISO 18744:2016 |
| 146 | DIN 96-2016 | 2016-12-01 | German | Slotted round head wood screws |
| 147 | DIN ISO 10315-2016 | 2016-12-01 | English | Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method (ISO 10315:2013, corrected version 2014-11-01) |
| 148 | DIN ISO 2137-2016 | 2016-12-01 | English | Petroleum products and lubricants - Determination of cone penetration of lubricating greases and petrolatum (ISO 2137:2007) |
| 149 | DIN EN ISO 17296-3-2016 | 2016-12-01 | English | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| 150 | DIN EN 62087-2, VDE 0868-102-2016 | 2016-12-00 | German | Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media (IEC 62087-2:2015); German version EN 62087-2:2016 |
| 151 | DIN EN 62877-1, VDE 0510-50-2016 | 2016-12-00 | German | Electrolyte and water for vented lead acid accumulators - Part 1: Requirements for electrolyte (IEC 62877-1:2016); German version EN 62877-1:2016 |
| 152 | DIN EN 60384-14-1, VDE 0565-1-2-2016 | 2016-12-00 | German | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2013/A1:2016); German version EN 60384-14:2013/A1:2016 |
| 153 | DIN EN 62282-3-200, VDE 0130-3-200-2016 | 2016-12-00 | German | Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods (IEC 62282-3-200:2015); German version EN 62282-3-200:2016 |
| 154 | DIN EN 61982-4, VDE 0510-43-2016 | 2016-12-00 | German | Secondary batteries (except lithium) for the propulsion of electric road vehicles - Part 4: Safety requirements of nickel-metal hydride cells and modules (IEC 61982-4:2015); German version EN 61982-4:2016 |
| 155 | DIN CLC/TS 50238-2 Berichtigung 1, VDE V 0831-238-2 Berichtigung 1-2016 | 2016-12-00 | German | Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General; German version EN 50238-1:2019 |
| 156 | DIN IEC/TS 61851-3-3, VDE V 0122-3-3-2016 | 2016-12-00 | German | Electric vehicles conductive power supply system - Part 3-3: Particular requirements for light electric vehicles - Battery swap systems (IEC 69/428/CD:2016) |
| 157 | DIN EN 60034-27-3, VDE 0530-27-3-2016 | 2016-12-00 | German | Rotating electrical machines - Part 27-3: Dielectric dissipation factor measurement on stator winding insulation of rotating electrical machines (IEC 60034-27-3:2015); German version EN 60034-27-3:2016 |
| 158 | DIN EN 60909-0, VDE 0102-2016 | 2016-12-00 | German | Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents (IEC 60909-0:2016); German version EN 60909-0:2016 |
| 159 | DIN EN 60076-19, VDE 0532-76-19-2016 | 2016-12-00 | German | Power transformers - Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors (IEC/TS 60076-19:2013, modified); German version EN 60076-19:2015 |
| 160 | DIN EN 60793-2, VDE 0888-300-2016 | 2016-12-00 | German | Optical fibres - Part 2: Product specifications - General (IEC 60793-2:2015); German version EN 60793-2:2016 |
| 161 | DIN EN 62129-1, VDE 0888-429-1-2016 | 2016-12-00 | German | Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers (IEC 62129-1:2016); German version EN 62129-1:2016 |
| 162 | DIN EN 60079-19, VDE 0165-20-1-2016 | 2016-12-00 | German | Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation (IEC 31J/261/CD:2016) |
| 163 | DIN EN 60794-1-21, VDE 0888-100-21-2016 | 2016-12-00 | German | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods (IEC 60794-1-21:2015); German version EN 60794-1-21:2015 |
| 164 | DIN EN 61557-8 Berichtigung 1, VDE 0413-8 Berichtigung 1-2016 | 2016-12-00 | German | Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence (IEC 61557-7:2007); German version EN 61557-7:2007 |
| 165 | DIN EN 61291-2, VDE 0888-291-2-2016 | 2016-12-00 | German | Optical amplifiers - Part 2: Single channel applications - Performance specification template (IEC 61291-2:2016); German version EN 61291-2:2016 |
| 166 | DIN EN 61242, VDE 0620-300-2016 | 2016-12-00 | German | Electrical accessories - Cable reels for household and similar purposes (IEC 61242:1995, modified + A1:2008 + A2:2015); German version EN 61242:1997 + A1:2008 + Cor.:2010 + A2:2016 |
| 167 | DIN EN 60793-2-30, VDE 0888-323-2016 | 2016-12-00 | German | Optical fibres - Part 2-30: Product specifications - Sectional specification for category A3 multimode fibres (IEC 60793-2-30:2015); German version EN 60793-2-30:2015 |
| 168 | DIN EN 62877-2, VDE 0510-51-2016 | 2016-12-00 | German | Electrolyte and water for vented lead acid accumulators - Part 2: Requirements for water (IEC 62877-2:2016); German version EN 62877-2:2016 |
| 169 | DIN EN 60794-3-70, VDE 0888-370-2016 | 2016-12-00 | German | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment (IEC 60794-3-70:2016); German version EN 60794-3-70:2016 |
| 170 | DIN IEC 60034-2-3, VDE 0530-2-3-2016 | 2016-12-00 | German | Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors (IEC 2/1841/CD:2016) |
| 171 | DIN EN ISO 105-X16-2016 | 2016-11-01 | German | Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas (ISO 105-X16:2016); German version EN ISO 105-X16:2016 |
| 172 | DIN EN 302574-1-2016 | 2016-11-01 | German | Satellite Earth Stations and Systems (SES) - Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requir |
| 173 | DIN EN ISO 105-X12-2016 | 2016-11-01 | English | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) |
| 174 | DIN EN 14534-2016 | 2016-11-01 | German | Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail; German version EN 14534:2016 |
| 175 | DIN EN 14534-2016 | 2016-11-01 | English | Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail |
| 176 | DIN 9926-2016 | 2016-11-01 | German | Round wire snap rings for bores |
| 177 | DIN 9925-2016 | 2016-11-01 | German | Round wire snap rings for shafts |
| 178 | DIN EN 302574-2-2016 | 2016-11-01 | German | Satellite Earth Stations and Systems (SES) - Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requir |
| 179 | DIN 43863-4-2016 | 2016-11-01 | German | Meter data communication - IP-Telemetry |
| 180 | DIN 51401-2016 | 2016-11-01 | German | Atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS) - Vocabulary |
| 181 | DIN EN 204-2016 | 2016-11-01 | German | Classification of thermoplastic wood adhesives for non-structural applications; German version EN 204:2016 |
| 182 | DIN EN 196-1-2016 | 2016-11-01 | German | Methods of testing cement - Part 1: Determination of strength; German version EN 196-1:2016 |
| 183 | DIN ISO 13373-2-2016 | 2016-11-01 | English | Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2016) |
| 184 | DIN EN 12163-2016 | 2016-11-01 | German | Copper and copper alloys - Rod for general purposes; German version EN 12163:2016 |
| 185 | DIN EN ISO 2178-2016 | 2016-11-01 | English | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| 186 | DIN EN 13230-1-2016 | 2016-11-01 | German | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements; German version EN 13230-1:2016 |
| 187 | DIN 475-1-2016 | 2016-11-01 | German | Widths across flats for bolts, screws, valves and fittings |
| 188 | DIN 34827-2016 | 2016-11-01 | English | Hexalobular socket set screws |
| 189 | DIN EN ISO 14273-2016 | 2016-11-01 | German | Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016); German version EN ISO 14273:2016 |
| 190 | DIN EN ISO 14272-2016 | 2016-11-01 | German | Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016); German version EN ISO 14272:2016 |
| 191 | DIN EN ISO 5182-2016 | 2016-11-01 | German | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016); German version EN ISO 5182:2016 |
| 192 | DIN EN ISO 16140-2-2016 | 2016-11-01 | German | Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016); German version EN ISO 16140-2:2016 |
| 193 | DIN EN ISO 16140-1-2016 | 2016-11-01 | German | Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016); German version EN ISO 16140-1:2016 |
| 194 | DIN EN ISO 17468-2016 | 2016-11-01 | German | Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method (ISO 17468:2016); German version EN ISO 17468:2016 |
| 195 | DIN ISO 1817-2016 | 2016-11-01 | German | Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015) |
| 196 | DIN EN ISO 16140-1-2016 | 2016-11-01 | English | Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) |
| 197 | DIN EN ISO 16140-2-2016 | 2016-11-01 | English | Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016) |
| 198 | DIN EN 12488-2016 | 2016-11-01 | German | Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing; German version EN 12488:2016 |
| 199 | DIN 34800-2016 | 2016-11-01 | English | Bolts and screws with external hexalobular driving feature with small flange |
| 200 | DIN EN ISO 2719-2016 | 2016-11-01 | German | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016); German version EN ISO 2719:2016 |
| 201 | DIN ISO 1817-2016 | 2016-11-01 | English | Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (ISO 1817:2015) |
| 202 | DIN EN 13616-2-2016 | 2016-11-01 | German | Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device; German version EN 13616-2:2016 |
| 203 | DIN EN 13616-1-2016 | 2016-11-01 | German | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device; German version EN 13616-1:2016 |
| 204 | DIN EN 13616-2-2016 | 2016-11-01 | English | Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device |
| 205 | DIN EN 13616-1-2016 | 2016-11-01 | English | Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device |
| 206 | DIN 6626-2016 | 2016-11-01 | German | Steel manhole shafts for the underground tanks designed for the storage of flammable and non-flammable water polluting liquids |
| 207 | DIN 6843-2016 | 2016-11-01 | German | Radiation protection rules for handling of unsealed radioactive material in medicine |
| 208 | DIN EN 1657-2016 | 2016-11-01 | German | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1); German v |
| 209 | DIN CEN/TS 16976-2016 | 2016-11-01 | German | Ambient air - Determination of the particle number concentration of atmospheric aerosol; German version CEN/TS 16976:2016 |
| 210 | DIN EN 300392-3-5-2016 | 2016-11-01 | German | Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3: Interworking at the Inter-System Interface (ISI) - Sub-part 5: Additional Network Feature for Mobility Management (ANF-ISIMM) (Endorsement of the English version EN 300 392-3-5 V1.5.1 (20 |
| 211 | DIN EN 302574-3-2016 | 2016-11-01 | German | Satellite Earth Stations and Systems (SES) - Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of ar |
| 212 | DIN 65208-2016 | 2016-11-01 | German | Aerospace series - Testing of locking torques for nuts and related threaded parts with MJ thread - Test bolts |
| 213 | DIN EN 13230-5-2016 | 2016-11-01 | German | Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements; German version EN 13230-5:2016 |
| 214 | DIN EN 1918-3-2016 | 2016-11-01 | German | Gas infrastructure - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns; German version EN 1918-3:2016 |
| 215 | DIN EN 1918-5-2016 | 2016-11-01 | German | Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities; German version EN 1918-5:2016 |
| 216 | DIN EN 62777-2016 | 2016-11-01 | German | Quality evaluation method for the sound field of directional loudspeaker array systems (IEC 62777:2016); German version EN 62777:2016 |
| 217 | DIN SPEC 4882-2016 | 2016-11-01 | German | Non-destructive testing - Electromagnetic test methods - Calibration blocks for grinding burns testing |
| 218 | DIN EN 16714-3-2016 | 2016-11-01 | German | Non-destructive testing - Thermographic testing - Part 3: Terms and definitions; German version EN 16714-3:2016 |
| 219 | DIN EN 9114-2016 | 2016-11-01 | German,English | Aerospace series - Quality systems - Direct Ship Guidance for Aerospace Companies; German and English version EN 9114:2015 |
| 220 | DIN EN ISO 12966-3-2016 | 2016-11-01 | German | Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) (ISO 12966-3:2016); German version EN ISO 12966-3:2016 |
| 221 | DIN EN 16714-1-2016 | 2016-11-01 | German | Non-destructive testing - Thermographic testing - Part 1: General principles; German version EN 16714-1:2016 |
| 222 | DIN 52096-2016 | 2016-11-01 | German | Testing of filler for road construction - Stiffening effect of filler on bitumen - Stabilization index |
| 223 | DIN EN 16643-2016 | 2016-11-01 | German | Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e. g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification; German version EN 16643:2016 |
| 224 | DIN 3021-1-2016 | 2016-11-01 | German | Hose clamps - Spring band clamp - Part 1: Dimensions, marking, materials, types |
| 225 | DIN EN 12167-2016 | 2016-11-01 | German | Copper and copper alloys - Profiles and bars for general purposes; German version EN 12167:2016 |
| 226 | DIN ISO 16063-43-2016 | 2016-11-01 | German | Methods for the calibration of vibration and shock transducers - Part 43: Calibration of accelerometers by model-based parameter identification (ISO 16063-43:2015) |
| 227 | DIN 4045-2016 | 2016-11-01 | German | Wastewater engineering - Vocabulary |
| 228 | DIN EN ISO 17751-2-2016 | 2016-11-01 | German | Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO 17751-2:2016); German version EN ISO 17751-2:2016 |
| 229 | DIN EN 61800-7-1-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition (IEC 61800-7-1:2015); English version EN 61800-7-1:2016 |
| 230 | DIN EN 6105-2016 | 2016-11-01 | German,English | Aerospace series - Stud with shoulder; German and English version EN 6105:2016 |
| 231 | DIN EN 61800-7-302-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies (IEC 61800-7-302:2015); English version EN 61800-7-302:2016 |
| 232 | DIN EN 6092-2016 | 2016-11-01 | German,English | Aerospace series - Receptacle, floating, double lug |
| 233 | DIN EN 9114-2016 | 2016-11-01 | German,English | Aerospace series - Quality systems - Direct Ship Guidance for Aerospace Companies; German and English version EN 9114:2015 |
| 234 | DIN 58131-2016 | 2016-11-01 | German,English | Optical volume filters; Text in German and English |
| 235 | DIN EN 61800-7-303-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies (IEC 61800-7-303:2015); English version EN 61800-7-303:2016 |
| 236 | DIN EN 4474-2016 | 2016-11-01 | German,English | Aerospace series - Aluminium pigmented coatings - Coating methods; German and English version EN 4474:2016 |
| 237 | DIN EN 61800-7-304-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies (IEC 61800-7-304:2015); English version EN 61800-7-304:2016 |
| 238 | DIN CEN ISO/TS 14907-2-2016 | 2016-11-01 | English | Electronic fee collection - Test procedures for user and fixed equipment - Part 2: Conformance test for the on-board unit application interface (ISO/TS 14907-2:2016); English version CEN ISO/TS 14907-2:2016 |
| 239 | DIN EN 61800-7-201-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification (IEC 61800-7-201:2015); English version EN 61800-7-201:2016 |
| 240 | DIN EN 61800-7-202-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification (IEC 61800-7-202:2015); English version EN 61800-7-202:2016 |
| 241 | DIN EN 61800-7-301-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies (IEC 61800-7-301:2015); English version EN 61800-7-301:2016 |
| 242 | DIN EN 46-2-2016 | 2016-11-01 | German | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method); German version EN 46-2:2016 |
| 243 | DIN EN 15433-6-2016 | 2016-11-01 | German | Transportation loads - Measurement and evaluation of dynamic mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports; German version EN 15433-6:2016 |
| 244 | DIN EN ISO 11855-2-2016 | 2016-11-01 | German | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012); German version EN ISO 11855-2:2015 |
| 245 | DIN EN ISO 11855-1-2016 | 2016-11-01 | German | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols and comfort criteria (ISO 11855-1:2012); German version EN ISO 11855-1:2015 |
| 246 | DIN EN 2714-014-2016 | 2016-11-01 | German,English | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 014: DR family, 4 to 11 cores, taped, screened (braided) and jacketed, UV laser printable - Product standard; German |
| 247 | DIN ISO 50003-2016 | 2016-11-01 | German | Energy management systems - Requirements for bodies providing audit and certification of energy management systems (ISO 50003:2014) |
| 248 | DIN EN ISO 14629-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012); German version EN ISO 14629:2016 |
| 249 | DIN EN ISO 23146-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method (ISO 23146:2012); German version EN ISO 23146:2016 |
| 250 | DIN CEN/TR 1030-2-2016 | 2016-11-01 | German | Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace; German version CEN/TR 1030-2:2016 |
| 251 | DIN SPEC 91334-2016 | 2016-11-01 | German | Methodology for analyzing and selecting e-business-standards |
| 252 | DIN EN 16974-2016 | 2016-11-01 | German | Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing; German version EN 16974:2016 |
| 253 | DIN EN ISO 17142-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014); German version EN |
| 254 | DIN EN 2997-007-2016 | 2016-11-01 | German,English | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 007: Hermetic receptacle with round flange atta |
| 255 | DIN 80103-2016 | 2016-11-01 | German | Inland navigation vessels - Minimum requirements for habitations |
| 256 | DIN EN ISO 20502-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009); German version EN ISO 20502:2016 |
| 257 | DIN CEN/TS 16969-2016 | 2016-11-01 | German | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of end grain sealing performance; German version CEN/TS 16969:2016 |
| 258 | DIN 68501-2016 | 2016-11-01 | German | Hardware for furniture - Test methods for determination of strength and stiffness of cabinet connectors |
| 259 | DIN CEN/TS 14758-2-2016 | 2016-11-01 | German | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 14758-2:2016 |
| 260 | DIN EN 4531-002-2016 | 2016-11-01 | German,English | Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements; German and English version EN 4531-002:2016 |
| 261 | DIN EN 16772-2016 | 2016-11-01 | German | Water quality - Guidance on methods for sampling invertebrates in the hyporheic zone of rivers; German version EN 16772:2016 |
| 262 | DIN EN ISO 17916-2016 | 2016-11-01 | German | Safety of thermal cutting machines (ISO 17916:2016); German version EN ISO 17916:2016 |
| 263 | DIN EN ISO 18739-2016 | 2016-11-01 | German | Dentistry - Vocabulary of process chain for CAD/CAM systems (ISO 18739:2016); German version EN ISO 18739:2016 |
| 264 | DIN EN ISO 11855-4-2016 | 2016-11-01 | German | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 1 |
| 265 | DIN EN 13055-2016 | 2016-11-01 | German | Lightweight aggregates; German version EN 13055:2016 |
| 266 | DIN EN 16812-2016 | 2016-11-01 | German | Textiles and textile products - Electrically conductive textiles - Determination of the linear electrical resistance of conductive tracks; German version EN 16812:2016 |
| 267 | DIN EN 6094-2016 | 2016-11-01 | German,English | Aerospace series - Washer, spring, countersunk; German and English version EN 6094:2016 |
| 268 | DIN EN ISO 26423-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009); German version EN ISO 26423:2016 |
| 269 | DIN EN 47-2016 | 2016-11-01 | German | Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method); German version EN 47:2016 |
| 270 | DIN EN 13348-2016 | 2016-11-01 | German | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum; German version EN 13348:2016 |
| 271 | DIN EN 1918-2-2016 | 2016-11-01 | English | Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields |
| 272 | DIN ISO 50003-2016 | 2016-11-01 | English | Energy management systems - Requirements for bodies providing audit and certification of energy management systems (ISO 50003:2014) |
| 273 | DIN EN ISO 15753-2016 | 2016-11-01 | English | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons (ISO 15753:2016) |
| 274 | DIN EN 46-1-2016 | 2016-11-01 | English | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) |
| 275 | DIN EN 12163-2016 | 2016-11-01 | English | Copper and copper alloys - Rod for general purposes |
| 276 | DIN EN ISO 20502-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of adhesion of ceramic coatings by scratch testing (ISO 20502:2005 including Cor 1:2009) |
| 277 | DIN EN ISO 9936-2016 | 2016-11-01 | English | Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography (ISO 9936:2016) |
| 278 | DIN EN ISO 17916-2016 | 2016-11-01 | English | Safety of thermal cutting machines (ISO 17916:2016) |
| 279 | DIN EN 1918-1-2016 | 2016-11-01 | English | Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers |
| 280 | DIN EN 13230-5-2016 | 2016-11-01 | English | Railway applications - Track - Concrete sleepers and bearers - Part 5: Special elements |
| 281 | DIN EN ISO 7787-1-2016 | 2016-11-01 | English | Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO 7787-1:2016) |
| 282 | DIN EN 12165-2016 | 2016-11-01 | English | Copper and copper alloys - Wrought and unwrought forging stock |
| 283 | DIN EN ISO 17777-2016 | 2016-11-01 | English | Welding consumables - Covered electrodes for manual metal arc welding of copper and copper alloys - Classification (ISO 17777:2016) |
| 284 | DIN EN 16714-2-2016 | 2016-11-01 | English | Non-destructive testing - Thermographic testing - Part 2: Equipment |
| 285 | DIN EN ISO 14270-2016 | 2016-11-01 | English | Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016) |
| 286 | DIN EN ISO 8537-2016 | 2016-11-01 | English | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) |
| 287 | DIN EN ISO 16634-2-2016 | 2016-11-01 | English | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products (ISO 16634-2:2016) |
| 288 | DIN EN 13230-2-2016 | 2016-11-01 | English | Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers |
| 289 | DIN EN ISO 14647-2016 | 2016-11-01 | English | Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test (ISO 14647:2000) |
| 290 | DIN EN 16812-2016 | 2016-11-01 | English | Textiles and textile products - Electrically conductive textiles - Determination of the linear electrical resistance of conductive tracks |
| 291 | DIN EN 1657-2016 | 2016-11-01 | English | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) |
| 292 | DIN EN 16729-1-2016 | 2016-11-01 | English | Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles |
| 293 | DIN EN ISO 15614-8-2016 | 2016-11-01 | English | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016) |
| 294 | DIN EN 13719-2016 | 2016-11-01 | English | Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers |
| 295 | DIN EN 16714-1-2016 | 2016-11-01 | English | Non-destructive testing - Thermographic testing - Part 1: General principles |
| 296 | DIN EN 13348-2016 | 2016-11-01 | English | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| 297 | DIN EN 14358-2016 | 2016-11-01 | English | Timber structures - Calculation and verification of characteristic values |
| 298 | DIN EN 46-2-2016 | 2016-11-01 | English | Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) |
| 299 | DIN EN 1918-4-2016 | 2016-11-01 | English | Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns |
| 300 | DIN EN 13055-2016 | 2016-11-01 | English | Lightweight aggregates |
| 301 | DIN EN ISO 18752-2016 | 2016-11-01 | English | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| 302 | DIN ISO 16063-43-2016 | 2016-11-01 | English | Methods for the calibration of vibration and shock transducers - Part 43: Calibration of accelerometers by model-based parameter identification (ISO 16063-43:2015) |
| 303 | VG 85569-2-2016 | 2016-11-01 | German,English | Face-to-face dimensions of valves in pipe systems - Part 2: Butterfly valves wafer type, selection of DIN EN 558; Text in German and English |
| 304 | VG 85544-2-2016 | 2016-11-01 | German,English | Flaps for main ballast tank vents - Part 2: Components; Text in German and English |
| 305 | VG 85569-1-2016 | 2016-11-01 | German,English | Face-to-face dimensions of valves in pipe systems - Part 1: Ball valves, selction from DIN EN 558; Text in German and English |
| 306 | VG 96927-106-2016 | 2016-11-01 | German,English | Cable assemblies - Part 106: Cable and insulated wires for the vehicle family "Fuchs", detail standard; Text in German and English |
| 307 | VG 85544-1-2016 | 2016-11-01 | German,English | Flaps for main ballast tank vents - Part 1: Assembly; Text in German and English |
| 308 | VG 85238-2016 | 2016-11-01 | German,English | Diaphragm valves made of CuSn10-C - Straightway valves with flange - DN 32 to DN 50, PN 10; DN 70 to DN 100, PN 6; Text in German and English |
| 309 | VG 85531-1-2016 | 2016-11-01 | German,English | Handle, adjustable, non-magnetizable - Part 1: Assembly; Text in German and English |
| 310 | VG 85531-2-2016 | 2016-11-01 | German,English | Handle, adjustable, non-magnetizable - Part 2: Components; Text in German and English |
| 311 | DIN 50106-2016 | 2016-11-01 | English | Testing of metallic materials - Compression test at room temperature |
| 312 | DIN EN 61800-7-203-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification (IEC 61800-7-203:2015); English version EN 61800-7-203:2016 |
| 313 | DIN EN 6081-2016 | 2016-11-01 | German, English | Aerospace series - Rivet, universal head, close tolerance - Inch series; German and English version EN 6081:2016 |
| 314 | DIN ISO/IEC 27002-2016 | 2016-11-01 | German | Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013 + Cor. 1:2014 + Cor. 2:2015) |
| 315 | DIN EN 6090-2016 | 2016-11-01 | German, English | Aerospace series - Washer, retaining; German and English version EN 6090:2016 |
| 316 | DIN EN 6094-2016 | 2016-11-01 | German, English | Aerospace series - Washer, spring, countersunk; German and English version EN 6094:2016 |
| 317 | DIN EN 6105-2016 | 2016-11-01 | German, English | Aerospace series - Stud with shoulder; German and English version EN 6105:2016 |
| 318 | DIN EN 6129-2016 | 2016-11-01 | German, English | Aerospace series - Blind bolt, protruding head, high strength, pulltype; German and English version EN 6129:2016 |
| 319 | DIN EN 6129-2016 | 2016-11-01 | German, English | Aerospace series - Blind bolt, protruding head, high strength, pulltype; German and English version EN 6129:2016 |
| 320 | DIN EN ISO 80369-6-2016 | 2016-11-01 | English | Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications (ISO 80369-6:2016) |
| 321 | DIN EN 9116-2016 | 2016-11-01 | German, English | Aerospace series - Notice of Change (NOC) Requirements; German and English version EN 9116:2015 |
| 322 | DIN EN 62448-2016 | 2016-11-01 | German | Multimedia systems and equipment - Multimedia e-publishing and e-books - Generic format for e-publishing (IEC 62448:2013); German version EN 62448:2014 |
| 323 | DIN EN 3375-009-2016 | 2016-11-01 | German, English | Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard; German and English version EN 3375-009:2016 |
| 324 | DIN EN 3646-004-2016 | 2016-11-01 | German, English | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard; German and English version EN 3646-004:2015 |
| 325 | DIN EN 62747 BERICHTIGUNG 1-2016 | 2016-11-01 | German | Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems (IEC 62747:2014); German version EN 62747:2014, Corrigendum to DIN EN 62747:2015-03, (IEC-Cor.:2015 to IEC 62747:2014) |
| 326 | DIN EN 3745-410-2016 | 2016-11-01 | German, English | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life; German and English version EN 3745-410:2015 |
| 327 | DIN SPEC 91348-2016 | 2016-11-01 | English | Testing crystalline silicon solar cells for susceptibility to potential induced degradation (PID) |
| 328 | DIN EN 4056-003-2016 | 2016-11-01 | German, English | Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard |
| 329 | DIN EN 4056-003-2016 | 2016-11-01 | German, English | Aerospace series - Cable ties for harnesses - Part 003: Plastic cable ties - Operating temperatures -65 °C to 105 °C and -65 °C to 150 °C - Product standard |
| 330 | DIN 58131-2016 | 2016-11-01 | German, English | Optical volume filters; Text in German and English |
| 331 | DIN EN 4474-2016 | 2016-11-01 | German, English | Aerospace series - Aluminium pigmented coatings - Coating methods; German and English version EN 4474:2016 |
| 332 | DIN EN 4531-002-2016 | 2016-11-01 | German, English | Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements; German and English version EN 4531-002:2016 |
| 333 | DIN EN 4531-101-2016 | 2016-11-01 | German, English | Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C to 125 °C - Product standard; German and English versi |
| 334 | DIN EN ISO 17830-2016 | 2016-11-01 | German | Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016); German version EN ISO 17830:2016 |
| 335 | DIN EN ISO 17751-1-2016 | 2016-11-01 | German | Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method (ISO 17751-1:2016); German version EN ISO 17751-1:2016 |
| 336 | DIN EN 6080-2016 | 2016-11-01 | German, English | Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series; German and English version EN 6080:2016 |
| 337 | DIN EN 6080-2016 | 2016-11-01 | German, English | Aerospace series - Rivet, 100° normal flush head, close tolerance - Inch series; German and English version EN 6080:2016 |
| 338 | DIN EN 12168-2016 | 2016-11-01 | English | Copper and copper alloys - Hollow rod for free machining purposes |
| 339 | DIN EN 12449-2016 | 2016-11-01 | English | Copper and copper alloys - Seamless, round tubes for general purposes |
| 340 | DIN EN 12449-2016 | 2016-11-01 | German | Copper and copper alloys - Seamless, round tubes for general purposes; German version EN 12449:2016 |
| 341 | DIN EN 6081-2016 | 2016-11-01 | German, English | Aerospace series - Rivet, universal head, close tolerance - Inch series; German and English version EN 6081:2016 |
| 342 | DIN EN 61800-7-204-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification (IEC 61800-7-204:2015); English version EN 61800-7-204:2016 |
| 343 | DIN EN 61800-7-301-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-301: Generic interface and use of profiles for power drive systems - Mapping of profile type 1 to network technologies (IEC 61800-7-301:2015); English version EN 61800-7-301:2016 |
| 344 | DIN EN 61800-7-302-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies (IEC 61800-7-302:2015); English version EN 61800-7-302:2016 |
| 345 | DIN EN 61800-7-303-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies (IEC 61800-7-303:2015); English version EN 61800-7-303:2016 |
| 346 | DIN EN 61800-7-304-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies (IEC 61800-7-304:2015); English version EN 61800-7-304:2016 |
| 347 | DIN ISO/IEC 27002-2016 | 2016-11-01 | English | Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013 + Cor. 1:2014 + Cor. 2:2015) |
| 348 | DIN EN ISO 23145-2-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012); German version EN ISO 23145-2:2016 |
| 349 | DIN ISO 29661-2016 | 2016-11-01 | English | Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012) |
| 350 | DIN EN ISO 19905-1-2016 | 2016-11-01 | English | Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 1: Jack-ups (ISO 19905-1:2016); English version EN ISO 19905-1:2016, only on CD-ROM |
| 351 | DIN EN ISO 80369-6-2016 | 2016-11-01 | German | Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications (ISO 80369-6:2016); German version EN ISO 80369-6:2016 |
| 352 | DIN ISO 29661-2016 | 2016-11-01 | German | Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012) |
| 353 | DIN 79161-1-2016 | 2016-11-01 | German | Playground inspection - Qualification of playground inspectors - Part 1: Training and education |
| 354 | DIN 79161-2-2016 | 2016-11-01 | German | Playground inspection - Qualification of playground inspectors - Part 2: Examination and verification of qualification |
| 355 | DIN EN 3155-001-2016 | 2016-11-01 | German, English | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification; German and English version EN 3155-001:2016 |
| 356 | DIN EN 3375-007-2016 | 2016-11-01 | German, English | Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard; German and English version EN 3375-007:2016 |
| 357 | DIN EN 3375-009-2016 | 2016-11-01 | German, English | Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard; German and English version EN 3375-009:2016 |
| 358 | DIN EN 1918-5-2016 | 2016-11-01 | English | Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities |
| 359 | DIN EN ISO 14895-2016 | 2016-11-01 | English | Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016) |
| 360 | DIN EN 16772-2016 | 2016-11-01 | English | Water quality - Guidance on methods for sampling invertebrates in the hyporheic zone of rivers |
| 361 | DIN EN ISO 13383-1-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012) |
| 362 | DIN EN 12167-2016 | 2016-11-01 | English | Copper and copper alloys - Profiles and bars for general purposes |
| 363 | DIN EN 196-10-2016 | 2016-11-01 | English | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement |
| 364 | DIN EN 16643-2016 | 2016-11-01 | English | Rubber and plastics hoses and hose assemblies - Non-bonded fluoroplastic lined (e. g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals - Specification |
| 365 | DIN EN 12164-2016 | 2016-11-01 | English | Copper and copper alloys - Rod for free machining purposes |
| 366 | DIN EN ISO 11855-4-2016 | 2016-11-01 | English | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 4: Dimensioning and calculation of the dynamic heating and cooling capacity of Thermo Active Building Systems (TABS) (ISO 1 |
| 367 | DIN EN ISO 16904-2016 | 2016-11-01 | English | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016) |
| 368 | DIN ISO 10656-2016 | 2016-11-01 | English | Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016) |
| 369 | DIN EN ISO 14189-2016 | 2016-11-01 | English | Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013) |
| 370 | DIN EN ISO 4796-1-2016 | 2016-11-01 | English | Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2016) |
| 371 | DIN EN 49-1-2016 | 2016-11-01 | English | Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method) |
| 372 | DIN EN ISO 19288-2016 | 2016-11-01 | English | Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016) |
| 373 | DIN EN ISO 17751-1-2016 | 2016-11-01 | English | Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method (ISO 17751-1:2016) |
| 374 | DIN EN 47-2016 | 2016-11-01 | English | Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) |
| 375 | DIN EN 16727-2-2-2016 | 2016-11-01 | English | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-2: Mechanical performance under dynamic loadings caused by passing trains - Calculation method |
| 376 | DIN EN ISO 18739-2016 | 2016-11-01 | English | Dentistry - Vocabulary of process chain for CAD/CAM systems (ISO 18739:2016) |
| 377 | DIN EN 13230-3-2016 | 2016-11-01 | English | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers |
| 378 | DIN EN ISO 10685-2-2016 | 2016-11-01 | English | Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version 2016-05-15) |
| 379 | DIN EN ISO 11702-2016 | 2016-11-01 | English | Animal and vegetable fats and oils - Enzymatic determination of total sterols content (ISO 11702:2016) |
| 380 | DIN EN ISO 11855-1-2016 | 2016-11-01 | English | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 1: Definition, symbols and comfort criteria (ISO 11855-1:2012) |
| 381 | DIN EN ISO 10764-2016 | 2016-11-01 | English | Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016) |
| 382 | DIN EN ISO 17142-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude (ISO 17142:2014) |
| 383 | DIN EN ISO 8254-2-2016 | 2016-11-01 | English | Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2016) |
| 384 | DIN EN ISO 7027-1-2016 | 2016-11-01 | English | Water quality - Determination of turbidity - Part 1: Quantitative methods (ISO 7027-1:2016) |
| 385 | DIN EN ISO 9692-3-2016 | 2016-11-01 | English | Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016) |
| 386 | DIN EN ISO 17830-2016 | 2016-11-01 | English | Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016) |
| 387 | DIN EN ISO 26423-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of coating thickness by crater-grinding method (ISO 26423:2009) |
| 388 | DIN EN ISO 26424-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008) |
| 389 | DIN EN ISO 23145-1-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) |
| 390 | DIN EN ISO 5182-2016 | 2016-11-01 | English | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| 391 | DIN EN ISO 23146-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method (ISO 23146:2012) |
| 392 | DIN ISO/IEC 27009-2016 | 2016-11-01 | English | Information technology - Security techniques - Sector-specific application of ISO/IEC 27001 - Requirements (ISO/IEC 27009:2016) |
| 393 | DIN EN ISO 8254-2-2016 | 2016-11-01 | German | Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2016); German version EN ISO 8254-2:2016 |
| 394 | DVS-IIW/EWF 1111-1-2016 | 2016-11-01 | German | Internationaler Schweisser (IS) - Mindestanforderungen an die Ausbildung, Pruefung und Qualifizierung - Teil I: Allgemeine Hinweise, Voraussetzungen, Themenuebersicht |
| 395 | DIN EN ISO 16993-2016 | 2016-11-01 | German | Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016); German version EN ISO 16993:2016 |
| 396 | DIN 11866-2016 | 2016-11-01 | German | Stainless steel components for aseptic applications in the chemical and pharmaceutical industry - Tubes |
| 397 | DIN EN 60870-5-101-2016 | 2016-11-01 | German | Telecontrol equipment and systems - Part 5-101: Transmission protocols - Companion standard for basic telecontrol tasks (IEC 60870-5-101:2003 + A1:2015); German version EN 60870-5-101:2003 + A1:2016 |
| 398 | DIN EN 12166-2016 | 2016-11-01 | English | Copper and copper alloys - Wire for general purposes |
| 399 | DIN EN ISO 15753-2016 | 2016-11-01 | German | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons (ISO 15753:2016); German version EN ISO 15753:2016 |
| 400 | DIN EN 196-1-2016 | 2016-11-01 | English | Methods of testing cement - Part 1: Determination of strength |
| 401 | DIN EN 12488-2016 | 2016-11-01 | English | Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing |
| 402 | DIN EN ISO 2719-2016 | 2016-11-01 | English | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| 403 | DIN EN ISO 16993-2016 | 2016-11-01 | English | Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016) |
| 404 | DIN EN ISO 14273-2016 | 2016-11-01 | English | Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds (ISO 14273:2016) |
| 405 | DIN EN ISO 17468-2016 | 2016-11-01 | English | Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method (ISO 17468:2016) |
| 406 | DIN 475-1-2016 | 2016-11-01 | English | Widths across flats for bolts, screws, valves and fittings |
| 407 | DIN EN 6101-2016 | 2016-11-01 | German,English | Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series; German and English version EN 6101:2016 |
| 408 | DIN EN 6101-2016 | 2016-11-01 | German,English | Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series; German and English version EN 6101:2016 |
| 409 | DIN 11866-2016 | 2016-11-01 | English | Stainless steel components for aseptic applications in the chemical and pharmaceutical industry - Tubes |
| 410 | VG 85540-2016 | 2016-11-01 | German,English | Bevel gears for remote controls; Text in German and English |
| 411 | VG 85239-2016 | 2016-11-01 | German,English | Diaphragm valves made of CuSn10-C - Straightway valves with sleeve - DN 20 to DN 50, PN 10; Text in German and English |
| 412 | DIN EN ISO 9936-2016 | 2016-11-01 | German | Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography (ISO 9936:2016); German version EN ISO 9936:2016 |
| 413 | DIN EN ISO 14895-2016 | 2016-11-01 | German | Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016); German version EN ISO 14895:2016 |
| 414 | DIN EN 12735-2-2016 | 2016-11-01 | German | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment; German version EN 12735-2:2016 |
| 415 | DIN EN ISO 15614-8-2016 | 2016-11-01 | German | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016); German version EN ISO 15614-8:2016 |
| 416 | DIN EN 12166-2016 | 2016-11-01 | German | Copper and copper alloys - Wire for general purposes; German version EN 12166:2016 |
| 417 | DIN EN 16727-2-2-2016 | 2016-11-01 | German | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance - Part 2-2: Mechanical performance under dynamic loadings caused by passing trains - Calculation method; German version EN 16 |
| 418 | DIN EN ISO 4796-1-2016 | 2016-11-01 | German | Laboratory glassware - Bottles - Part 1: Screw-neck bottles (ISO 4796-1:2016); German version EN ISO 4796-1:2016 |
| 419 | DIN EN ISO 16904-2016 | 2016-11-01 | German | Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016); German version EN ISO 16904:2016 |
| 420 | DIN EN 12165-2016 | 2016-11-01 | German | Copper and copper alloys - Wrought and unwrought forging stock; German version EN 12165:2016 |
| 421 | DIN 34827-2016 | 2016-11-01 | German | Hexalobular socket set screws |
| 422 | DIN 34800-2016 | 2016-11-01 | German | Bolts and screws with external hexalobular driving feature with small flange |
| 423 | DIN 18205-2016 | 2016-11-01 | German | Brief for building design |
| 424 | DIN EN 12735-2-2016 | 2016-11-01 | English | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| 425 | DIN EN 13230-1-2016 | 2016-11-01 | English | Railway applications - Track - Concrete sleepers and bearers - Part 1: General requirements |
| 426 | DIN EN ISO 11855-2-2016 | 2016-11-01 | English | Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 2: Determination of the design heating and cooling capacity (ISO 11855-2:2012) |
| 427 | DIN EN ISO 105-X12-2016 | 2016-11-01 | German | Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016); German version EN ISO 105-X12:2016 |
| 428 | DIN EN ISO 2178-2016 | 2016-11-01 | German | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016); German version EN ISO 2178:2016 |
| 429 | DIN EN ISO 10685-2-2016 | 2016-11-01 | German | Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version 2016-05-15); German version EN ISO 10685-2:2016 |
| 430 | DIN EN 196-10-2016 | 2016-11-01 | German | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement; German version EN 196-10:2016 |
| 431 | DIN 6397-2016 | 2016-11-01 | German | Floortiling trowel |
| 432 | DIN ISO 13373-2-2016 | 2016-11-01 | German | Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data (ISO 13373-2:2016) |
| 433 | DIN EN ISO 8537-2016 | 2016-11-01 | German | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016); German version EN ISO 8537:2016 |
| 434 | DIN EN 302195-2016 | 2016-11-01 | German | Short Range Devices (SRD) - Ultra Low Power Active Medical Implants (ULP-AMI) and accessories (ULP-AMI-P) operating in the frequency range 9 kHz to 315 kHz - Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/E |
| 435 | DIN EN ISO 19288-2016 | 2016-11-01 | German | Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of magnesium and magnesium alloys - Classification (ISO 19288:2016); German version EN ISO 19288:2016 |
| 436 | DIN 50106-2016 | 2016-11-01 | German | Testing of metallic materials - Compression test at room temperature |
| 437 | DIN ISO 10656-2016 | 2016-11-01 | German | Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016) |
| 438 | DIN 3021-3-2016 | 2016-11-01 | German | Hose clamps - Spring band clamp - Part 3: System: Spring band clamp-hose-spigot |
| 439 | DIN SPEC 91350-2016 | 2016-11-01 | German | Linked BIM data exchange comprising building information model and specified bill of quantities |
| 440 | DIN 3021-2-2016 | 2016-11-01 | German | Hose clamps - Spring band clamp - Part 2: Technical delivery conditions |
| 441 | DIN EN 2997-002-2016 | 2016-11-01 | German,English | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 002: Specification of performance and contact a |
| 442 | DIN EN ISO 14647-2016 | 2016-11-01 | German | Metallic coatings - Determination of porosity in gold coatings on metal substrates - Nitric acid vapour test (ISO 14647:2000); German version EN ISO 14647:2016 |
| 443 | DIN EN 13230-3-2016 | 2016-11-01 | German | Railway applications - Track - Concrete sleepers and bearers - Part 3: Twin-block reinforced sleepers; German version EN 13230-3:2016 |
| 444 | DIN EN ISO 23145-1-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007); German version EN ISO 23145-1:2016 |
| 445 | DIN CEN/TS 16937-2016 | 2016-11-01 | German | Nanotechnologies - Guidance for the responsible development of nanotechnologies; German version CEN/TS 16937:2016 |
| 446 | DIN 14663-2016 | 2016-11-01 | German | Firefighting and fire protection - Control panel for fire brigade inhouse radio systems |
| 447 | DIN CEN/TS 16945-2016 | 2016-11-01 | German | Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma; German version CEN/TS 16945:2016 |
| 448 | DIN CEN/TS 15634-5-2016 | 2016-11-01 | German | Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR; German version CEN/TS 15634-5:2016 |
| 449 | DIN EN 12765-2016 | 2016-11-01 | German | Classification of thermosetting wood adhesives for non-structural applications; German version EN 12765:2016 |
| 450 | DIN 14662-2016 | 2016-11-01 | German | Firefighting and fire protection - Fire-brigade indication panel for fire detection and fire alarm systems |
| 451 | DIN EN 1918-4-2016 | 2016-11-01 | German | Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns; German version EN 1918-4:2016 |
| 452 | DIN EN 16714-2-2016 | 2016-11-01 | German | Non-destructive testing - Thermographic testing - Part 2: Equipment; German version EN 16714-2:2016 |
| 453 | DIN EN 13230-2-2016 | 2016-11-01 | German | Railway applications - Track - Concrete sleepers and bearers - Part 2: Prestressed monoblock sleepers; German version EN 13230-2:2016 |
| 454 | DIN 14661-2016 | 2016-11-01 | German | Firefighting and fire protection - Fire-brigade control panel for fire detection and fire alarm systems |
| 455 | DIN 6855-4-2016 | 2016-11-01 | German | Constancy testing of nuclear medicine instruments - Part 4: Positron emission tomographs (PET) |
| 456 | DIN EN 61753-381-2-2016 | 2016-11-01 | German | Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) (IEC 61753-381-2:2016); German version EN 61753-381-2:2016 |
| 457 | DIN CEN/TS 764-8-2016 | 2016-11-01 | German | Pressure equipment and assemblies - Part 8: Proof test; German version CEN/TS 764-8:2016 |
| 458 | DIN EN 1918-2-2016 | 2016-11-01 | German | Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields; German version EN 1918-2:2016 |
| 459 | DIN CEN/TR 16793-2016 | 2016-11-01 | German | Guide for the selection, application and use of flame arresters; German version CEN/TR 16793:2016 |
| 460 | DIN EN 16729-1-2016 | 2016-11-01 | German | Railway applications - Infrastructure - Non-destructive testing on rails in track - Part 1: Requirements for ultrasonic inspection and evaluation principles; German version EN 16729-1:2016 |
| 461 | DIN EN 61800-7-203-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification (IEC 61800-7-203:2015); English version EN 61800-7-203:2016 |
| 462 | DIN EN ISO 19905-1-2016 | 2016-11-01 | English | Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 1: Jack-ups (ISO 19905-1:2016); English version EN ISO 19905-1:2016, only on CD-ROM |
| 463 | DIN EN 61800-7-204-2016 | 2016-11-01 | English | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification (IEC 61800-7-204:2015); English version EN 61800-7-204:2016 |
| 464 | DIN EN ISO 13383-1-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Microstructural characterization - Part 1: Determination of grain size and size distribution (ISO 13383-1:2012); German version EN ISO 13383-1:2016 |
| 465 | DIN EN ISO 10764-2016 | 2016-11-01 | German | Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016); German version EN ISO 10764:2016 |
| 466 | DIN EN 3155-001-2016 | 2016-11-01 | German,English | Aerospace series - Electrical contacts used in elements of connection - Part 001: Technical Specification; German and English version EN 3155-001:2016 |
| 467 | DIN EN 9116-2016 | 2016-11-01 | German,English | Aerospace series - Notice of Change (NOC) Requirements; German and English version EN 9116:2015 |
| 468 | DIN EN ISO 9692-3-2016 | 2016-11-01 | German | Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016); German version EN ISO 9692-3:2016 |
| 469 | DIN EN ISO 14270-2016 | 2016-11-01 | German | Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds (ISO 14270:2016); German version EN ISO 14270:2016 |
| 470 | DIN EN ISO 14189-2016 | 2016-11-01 | German | Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013); German version EN ISO 14189:2016 |
| 471 | DIN EN 3375-007-2016 | 2016-11-01 | German,English | Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard; German and English version EN 3375-007:2016 |
| 472 | DIN 91252-2016 | 2016-11-01 | German,English | Electrically propelled road vehicles - Battery systems - Design specifications for Lithium-Ion battery cells; Text in German and English |
| 473 | DIN EN 49-1-2016 | 2016-11-01 | German | Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival - Part 1: Application by surface treatment (Laboratory method); German version EN 49-1:2016 |
| 474 | DIN EN ISO 16634-2-2016 | 2016-11-01 | German | Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 2: Cereals, pulses and milled cereal products (ISO 16634-2:2016); German version EN ISO 16634-2: |
| 475 | DIN EN ISO 16482-1-2016 | 2016-11-01 | German | Binders for paints and varnishes - Determination of the non-volatile-matter content of aqueous rosin-resin dispersions - Part 1: Oven method (ISO 16482-1:2013); German version EN ISO 16482-1:2016 |
| 476 | DIN EN ISO 18081-2016 | 2016-11-01 | German | Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016); German version EN ISO 18081:2016 |
| 477 | DIN EN 2997-005-2016 | 2016-11-01 | German,English | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 005: Hermetic square flange receptacle - Produc |
| 478 | DIN EN 4531-101-2016 | 2016-11-01 | German,English | Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C to 125 °C - Product standard; German and English version EN 4531-1 |
| 479 | DIN EN ISO 18752-2016 | 2016-11-01 | German | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014); German version EN ISO 18752:2016 |
| 480 | DIN EN 6092-2016 | 2016-11-01 | German,English | Aerospace series - Receptacle, floating, double lug |
| 481 | DIN ISO 16486-4-2016 | 2016-11-01 | German | Kunststoff-Rohrleitungssysteme fuer die Gasversorgung - Rohrleitungssysteme aus weichmacherfreiem Polyamid (PA-U) mit Schweissverbindungen und mechanischen Verbindungen - Teil 4: Armaturen (ISO 16486-4:2016) |
| 482 | DIN ISO 16486-4-2016 | 2016-11-01 | English | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 4: Valves (ISO 16486-4:2016) |
| 483 | DIN EN ISO 15012-4-2016 | 2016-11-01 | German | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016); German version EN ISO 15012-4:2016 |
| 484 | DIN EN ISO 23145-2-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) |
| 485 | DIN EN ISO 14629-2016 | 2016-11-01 | English | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of flowability of ceramic powders (ISO 14629:2012) |
| 486 | DIN EN ISO 14272-2016 | 2016-11-01 | English | Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016) |
| 487 | DIN EN ISO 105-X16-2016 | 2016-11-01 | English | Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas (ISO 105-X16:2016) |
| 488 | DIN EN ISO 18081-2016 | 2016-11-01 | English | Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2016) |
| 489 | DIN EN ISO 17751-2-2016 | 2016-11-01 | English | Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning Electron Microscopy method (ISO 17751-2:2016) |
| 490 | DIN EN 14019-2016 | 2016-11-01 | English | Curtain Walling - Impact resistance - Performance requirements |
| 491 | DIN EN 16714-3-2016 | 2016-11-01 | English | Non-destructive testing - Thermographic testing - Part 3: Terms and definitions |
| 492 | DIN EN 12765-2016 | 2016-11-01 | English | Classification of thermosetting wood adhesives for non-structural applications |
| 493 | DIN EN 16974-2016 | 2016-11-01 | English | Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing |
| 494 | DIN EN 15433-6-2016 | 2016-11-01 | English | Transportation loads - Measurement and evaluation of dynamic-mechanical loads - Part 6: Automatic recording systems for measuring randomly occurring shock during monitoring of transports |
| 495 | DIN EN ISO 26424-2016 | 2016-11-01 | German | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of the abrasion resistance of coatings by a micro-scale abrasion test (ISO 26424:2008); German version EN ISO 26424:2016 |
| 496 | DIN EN 3745-410-2016 | 2016-11-01 | German,English | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life; German and English version EN 3745-410:2015 |
| 497 | DIN EN 14358-2016 | 2016-11-01 | German | Timber structures - Calculation and verification of characteristic values; German version EN 14358:2016 |
| 498 | DIN EN 1918-1-2016 | 2016-11-01 | German | Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers; German version EN 1918-1:2016 |
| 499 | DIN ISO/IEC 27009-2016 | 2016-11-01 | German | Information technology - Security techniques - Sector-specific application of ISO/IEC 27001 - Requirements (ISO/IEC 27009:2016) |
| 500 | DIN EN 6090-2016 | 2016-11-01 | German,English | Aerospace series - Washer, retaining; German and English version EN 6090:2016 |
|