Pos | standard Number | publication date | Language | Description |
1 | DIN 18041-2004 | 2004-05-01 | German | Acoustic quality in small to medium-sized rooms |
2 | DIN 27202-1-2004 | 2004-05-01 | German | State of railway vehicles - Superstructure and special equipment of vehicles - Part 1: Vehicle superstructure |
3 | DIN 27202-2-2004 | 2004-05-01 | German | State of railway vehicles - Superstructure and special equipment of vehicles - Part 2: Buffing and draw gear |
4 | DIN 27202-3-2004 | 2004-05-01 | German | State of railway vehicles - Superstructure and special equipment of vehicles - Part 3: Steps, handles, hand rails, ladders, railings |
5 | DIN 27202-5-2004 | 2004-05-01 | German | State of railway vehicles - Superstructure and special equipment of vehicles - Part 5: Moveable components of vehicle superstructure and doors (except doors of passenger areas) |
6 | DIN 27202-6-2004 | 2004-05-01 | German | State of railway vehicles - Superstructure and special equipment of vehicles - Part 6: Safety equipment for load and transport protection |
7 | DIN 27202-7-2004 | 2004-05-01 | German | State of railway vehicles - Superstructure and special equipment of vehicles - Part 7: Rancher |
8 | DIN 32564-1-2004 | 2004-05-01 | German | Production equipment for micro-systems - Terms and definitions - Part 1: General terms of micro-system technology |
9 | DIN 32564-3-2004 | 2004-05-01 | German | Production equipment for micro-systems - Terms and definitions - Part 3: Handling, storage and transport |
10 | DIN 51003-2004 | 2004-05-01 | German | Total reflection x-ray fluorescence - Principles and definitions |
11 | DIN 51008-1-2004 | 2004-05-01 | German | Optical emission spectrometry (OES) - Part 1: Terms for systems with sparks and low pressure discharges |
12 | DIN 58940-20 Beiblatt 1-2004 | 2004-05-01 | German, English | Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 20: Coding of antimicrobial agents - Codes for antimicrobial agents |
13 | DIN 58940-20 Beiblatt 1-2004 | 2004-05-01 | German, English | Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 20: Coding of antimicrobial agents - Codes for antimicrobial agents |
14 | DIN 70028-2004 | 2004-05-01 | German | Passenger cars - Measuring the stopping distance with ABS in straight-ahead stops |
15 | DIN CEN/TS 12037-2004 | 2004-05-01 | German | Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method; German version CEN/TS 12037:2003 |
16 | DIN EN 14200-2004 | 2004-05-01 | German | Railway applications - Suspension components - Parabolic springs, steel; German version EN 14200:2004 |
17 | DIN EN 14200-2004 | 2004-05-01 | English | Railway applications - Suspension components - Parabolic springs, steel |
18 | DIN EN 14208-2004 | 2004-05-01 | German | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction; German version EN 14208:2004 |
19 | DIN EN 14208-2004 | 2004-05-01 | English | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
20 | DIN EN 14325-2004 | 2004-05-01 | English | Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages |
21 | DIN EN 14325-2004 | 2004-05-01 | German | Protective clothing against chemicals - Test methods and performance classification of chemical protective clothing materials, seams, joins and assemblages; German version EN 14325:2004 |
22 | DIN EN 14385-2004 | 2004-05-01 | German | Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V; German version EN 14385:2004 |
23 | DIN EN 14385-2004 | 2004-05-01 | English | Stationary source emissions - Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, TI and V |
24 | DIN EN 60191-6-10-2004 | 2004-05-01 | German | Mechanical standardization of semiconductor devices - Part 6-10: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Dimensions of P-VSON (IEC 60191-6-10:2003); German version EN 60191-6-10:2003 |
25 | DIN EN 60401-3-2004 | 2004-05-01 | German | Terms and nomenclature for cores made of magnetically soft ferrites - Part 3: Guidelines on the format of data appearing in manufacturers' catalogues of transformer and inductor cores (IEC 60401-3:2003); German version EN 60401-3:2003 |
26 | DIN EN 60942-2004 | 2004-05-01 | German | Electroacoustics - Sound calibrators (IEC 60942:2003); German version EN 60942:2003 |
27 | DIN EN 61188-5-2-2004 | 2004-05-01 | German | Printed boards and printed board assemblies - Design and use - Part 5-2: Attachment (land/joint) considerations - Discrete components (IEC 61188-5-2:2003); German version EN 61188-5-2:2003 |
28 | DIN EN 61290-3-1-2004 | 2004-05-01 | German | Optical amplifiers - Test methods - Part 3-1: Noise figure parameters - Optical spectrum analyzer method (IEC 61290-3-1:2003); German version EN 61290-3-1:2003 |
29 | DIN EN 62148-6-2004 | 2004-05-01 | German | Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers (IEC 62148-6:2003); German version EN 62148-6:2003 |
30 | DIN EN ISO 295-2004 | 2004-05-01 | German | Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004 |
31 | DIN EN ISO 295-2004 | 2004-05-01 | English | Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004) |
32 | DIN EN ISO 2342-2004 | 2004-05-01 | German | Slotted headless screws with shank (ISO 2342:2003); German version EN ISO 2342:2003 |
33 | DIN EN ISO 2342-2004 | 2004-05-01 | English | Slotted headless screws with shank (ISO 2342:2003) |
34 | DIN EN ISO 2580-2-2004 | 2004-05-01 | English | Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003) |
35 | DIN EN ISO 2580-2-2004 | 2004-05-01 | German | Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003); German version EN ISO 2580-2:2003 |
36 | DIN EN ISO 2897-2-2004 | 2004-05-01 | English | Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003) |
37 | DIN EN ISO 2897-2-2004 | 2004-05-01 | German | Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003); German version EN ISO 2897-2:2003 |
38 | DIN EN ISO 4126-4-2004 | 2004-05-01 | English | Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004) |
39 | DIN EN ISO 3715-1-2004 | 2004-05-01 | German | Ships and marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers (ISO 3715-1:2002); German version EN ISO 3715-1:2004 |
40 | DIN EN ISO 3715-1-2004 | 2004-05-01 | English | Ships and marine technology - Propulsion plants for ships - Part 1: Vocabulary for geometry of propellers (ISO 3715-1:2002) |
41 | DIN EN ISO 3766-2004 | 2004-05-01 | English | Construction drawings - Simplified representation of concrete reinforcement (ISO 3766:2003) |
42 | DIN EN ISO 3766-2004 | 2004-05-01 | German | Construction drawings - Simplified representation of concrete reinforcement (ISO 3766:2003); German version EN ISO 3766:2003 |
43 | DIN EN ISO 4026-2004 | 2004-05-01 | German | Hexagon socket set screws with flat point (ISO 4026:2003); German version EN ISO 4026:2003 |
44 | DIN EN ISO 4026-2004 | 2004-05-01 | English | Hexagon socket set screws with flat point (ISO 4026:2003) |
45 | DIN EN ISO 4027-2004 | 2004-05-01 | English | Hexagon socket set screws with cone point (ISO 4027:2003) |
46 | DIN EN ISO 4027-2004 | 2004-05-01 | German | Hexagon socket set screws with cone point (ISO 4027:2003); German version EN ISO 4027:2003 |
47 | DIN EN ISO 4028-2004 | 2004-05-01 | English | Hexagon socket set screws with dog point (ISO 4028:2003) |
48 | DIN EN ISO 4028-2004 | 2004-05-01 | German | Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003 |
49 | DIN EN ISO 4029-2004 | 2004-05-01 | German | Hexagon socket set screws with cup point (ISO 4029:2003); German version EN ISO 4029:2003 |
50 | DIN EN 1917 Berichtigung 1-2004 | 2004-05-01 | English | Corrigenda to DIN EN 1917:2003-04 |
51 | DIN EN 4550-2-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design confirguration - Inch series - Part 2: Port ends; German and English version EN 4550-2:2003 |
52 | DIN EN 4550-4-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design configuration - Inch series - Part 4: Female sealing ends; German and English version EN 4550-4:2003 |
53 | DIN EN 4550-4-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design configuration - Inch series - Part 4: Female sealing ends; German and English version EN 4550-4:2003 |
54 | DIN EN 4550-1-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design configuration - Inch series - Part 1: Male sealing ends, spherical; German and English version EN 4550-1:2003 |
55 | DIN EN 4550-1-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design configuration - Inch series - Part 1: Male sealing ends, spherical; German and English version EN 4550-1:2003 |
56 | DIN EN 4549-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series; German and English version EN 4549:2003 |
57 | DIN EN 4549-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series; German and English version EN 4549:2003 |
58 | DIN EN 4550-3-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design configuration - Inch series - Part 3: Port connections; German and English version EN 4550-3:2003 |
59 | DIN EN 4551-2004 | 2004-05-01 | German, English | Aerospace series - Pipe couplings, 37掳, in heat resisting steel - Swivel nuts - Inch series; German and English version EN 4551:2003 |
60 | DIN EN 4551-2004 | 2004-05-01 | German, English | Aerospace series - Pipe couplings, 37掳, in heat resisting steel - Swivel nuts - Inch series; German and English version EN 4551:2003 |
61 | DIN EN 1504-10-2004 | 2004-05-01 | German | Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works; German version EN 1504-10:2003 |
62 | DIN EN 4585-2004 | 2004-05-01 | German, English | Aerospace series - Clips, spring tension - Technical specification; German and English version EN 4585:2003 |
63 | DIN EN 1726-1/A1-2004 | 2004-05-01 | German | Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements; German version EN 1726-1:1998/A1:2003 |
64 | DIN EN 1726-1/A1-2004 | 2004-05-01 | English | Safety of industrial trucks - Self-propelled trucks up to and including 10 000 kg capacity and industrial tractors with a drawbar pull up to and including 20 000 N - Part 1: General requirements |
65 | DIN EN 1504-10-2004 | 2004-05-01 | English | Products and systems for the protection and repair of concrete structures - Definitions, Requirements, Quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
66 | DIN EN 12217-2004 | 2004-05-01 | English | Doors - Operating forces - Requirements and classification |
67 | DIN EN 1917 Berichtigung 1-2004 | 2004-05-01 | German | Corrigenda to DIN EN 1917:2003-04 |
68 | DIN EN 1916 Berichtigung 1-2004 | 2004-05-01 | German | Corrigenda to DIN EN 1916:2003-04 |
69 | DIN EN 1916 Berichtigung 1-2004 | 2004-05-01 | English | Corrigenda to DIN EN 1916:2003-04 |
70 | DIN EN 4585-2004 | 2004-05-01 | German, English | Aerospace series - Clips, spring tension - Technical specification; German and English version EN 4585:2003 |
71 | DIN EN 836/A3-2004 | 2004-05-01 | German | Garden equipment - Powered lawnmowers - Safety; German version EN 836:1997/A3:2004 |
72 | DIN EN 836/A3-2004 | 2004-05-01 | English | Garden equipment - Powered lawnmowers - Safety |
73 | DIN EN 1991-2-2004 | 2004-05-01 | German | Eurocode 1: Actions on structures - Part 2: Traffic loads on bridges; German version EN 1991-2:2003 |
74 | DIN EN 413-1-2004 | 2004-05-01 | English | Masonry cement - Part 1: Composition, specifications and conformity criteria |
75 | DIN EN 451-1-2004 | 2004-05-01 | German | Method of testing fly ash - Part 1: Determination of free calcium oxide content; German version EN 451-1:2003 |
76 | DIN EN 451-1-2004 | 2004-05-01 | English | Method of testing fly ash - Part 1: Determination of free calcium oxide content |
77 | DIN EN 4550-3-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design configuration - Inch series - Part 3: Port connections; German and English version EN 4550-3:2003 |
78 | DIN EN 4550-2-2004 | 2004-05-01 | German, English | Aerospace series - Pipe coupling 37掳 - Design confirguration - Inch series - Part 2: Port ends; German and English version EN 4550-2:2003 |
79 | DIN EN ISO 4934-2004 | 2004-05-01 | German | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003); German version EN ISO 4934:2003 |
80 | DIN EN ISO 14673-3-2004 | 2004-05-01 | German | Milk and milk products - Determination of nitrate and nitrite contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) (ISO 14673-3:2004); German version EN ISO 14673-3:2004 |
81 | DIN EN ISO 14673-3-2004 | 2004-05-01 | English | Milk and milk products - Determination of nitrate and nitrite contents - Part 3: Method using cadmium reduction and flow injection analysis with in-line dialysis (Routine method) (ISO 14673-3:2004) |
82 | DIN ISO 813-2004 | 2004-05-01 | German | Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90掳 peel method (ISO 813:1997) |
83 | DIN EN ISO 15197-2004 | 2004-05-01 | German, English | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003); German version EN ISO 15197:2003, text German and English |
84 | DIN EN ISO 14673-2-2004 | 2004-05-01 | English | Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2004) |
85 | DIN EN ISO 16264-2004 | 2004-05-01 | German | Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002); German version EN ISO 16264:2004 |
86 | DIN EN ISO 16264-2004 | 2004-05-01 | English | Water quality - Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection (ISO 16264:2002) |
87 | DIN EN ISO 4165-2004 | 2004-05-01 | English | Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001) |
88 | DIN EN ISO 4165-2004 | 2004-05-01 | German | Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001); German version EN ISO 4165:2003 |
89 | DIN EN ISO 4126-7-2004 | 2004-05-01 | English | Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2004) |
90 | DIN IEC 62153-4-5-2004 | 2004-05-01 | German, English | Metallic communication cable test methods - Part 4-5: Electro Magnetic Compatibility (EMC) - Coupling or screening attenuation - absorbing clamp method (IEC 46A/586/CD:2003) |
91 | DIN IEC 62153-4-5-2004 | 2004-05-01 | German, English | Metallic communication cable test methods - Part 4-5: Electro Magnetic Compatibility (EMC) - Coupling or screening attenuation - absorbing clamp method (IEC 46A/586/CD:2003) |
92 | DIN IEC 62153-4-3-2004 | 2004-05-01 | German | Metallic communication cable test methods - Part 4-3: Electro Magnetic Compatibility (EMC) - Surface transfer impedance - Triaxial method (IEC 46A/576/CD:2003) |
93 | DIN EN ISO 8980-2-2004 | 2004-05-01 | English | Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:2004) |
94 | DIN EN ISO 8980-1-2004 | 2004-05-01 | German | Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:2004); German version EN ISO 8980-1:2004 |
95 | DIN EN ISO 8980-1-2004 | 2004-05-01 | English | Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:2004) |
96 | DIN EN ISO 7459-2004 | 2004-05-01 | German | Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004); German version EN ISO 7459:2004 |
97 | DIN EN ISO 15197-2004 | 2004-05-01 | German, English | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003); German version EN ISO 15197:2003, text German and English |
98 | VG 85005-26-2004 | 2004-05-01 | German, English | Graphical symbols for technical drawings - naval engineering - Part 26: Shipboard medical facilities |
99 | DIN ISO 16632-2004 | 2004-05-01 | German | Tobacco and tobacco products - Determination of water content - Gas-chromatographic method (ISO 16632:2003) |
100 | DIN ISO 6133-2004 | 2004-05-01 | German | Rubber and plastics - Analysis of multipeak traces obtained in determination of tear strength and adhesion strength (ISO 6133:1998) |
101 | VG 85005-19-2004 | 2004-05-01 | German, English | Graphical symbols for technical drawings - Naval engineering - Part 19: Life-saving equipment and boats |
102 | DIN ISO 10727-2004 | 2004-05-01 | German | Tea and instant tea in solid form - Determination of caffeine content - Method using high-performance liquid chromatography (ISO 10727:2002) |
103 | DIN ISO 10727-2004 | 2004-05-01 | English | Tea and instant tea in solid form - Determination of caffeine content - Method using high-performance liquid chromatography (ISO 10727:2002) |
104 | VG 81226-6-2004 | 2004-05-01 | German | Signs and markings - Part 6: Medical equipment |
105 | DIN EN ISO 7459-2004 | 2004-05-01 | English | Glass containers - Thermal shock resistance and thermal shock endurance - Test methods (ISO 7459:2004) |
106 | DIN EN ISO 9692-1-2004 | 2004-05-01 | English | Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003) |
107 | DIN EN ISO 9692-1-2004 | 2004-05-01 | German | Welding and allied processes - Recommendations for joint preparation - Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels (ISO 9692-1:2003); German version EN ISO 9692-1:2003 |
108 | DIN EN ISO 7458-2004 | 2004-05-01 | German | Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004); German version EN ISO 7458:2004 |
109 | DIN EN ISO 7458-2004 | 2004-05-01 | English | Glass containers - Internal pressure resistance - Test methods (ISO 7458:2004) |
110 | DIN EN ISO 9886-2004 | 2004-05-01 | English | Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004) |
111 | DIN EN ISO 9886-2004 | 2004-05-01 | German | Ergonomics - Evaluation of thermal strain by physiological measurements (ISO 9886:2004); German version EN ISO 9886:2004 |
112 | DIN EN ISO 7380-2004 | 2004-05-01 | English | Heaxagon socket button head screws (ISO 7380:2004) |
113 | DIN EN ISO 7380-2004 | 2004-05-01 | German | Heaxagon socket button head screws (ISO 7380:2004); German version EN ISO 7380:2004 |
114 | DIN IEC 61196-1-317-2004 | 2004-05-01 | German, English | Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable (IEC 46A/597/CD:2003) |
115 | DIN IEC 61196-1-317-2004 | 2004-05-01 | German, English | Coaxial communication cables - Part 1-317: Mechanical test methods - Test for crush resistance of cable (IEC 46A/597/CD:2003) |
116 | DIN EN ISO 9018-2004 | 2004-05-01 | English | Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003) |
117 | DIN EN ISO 9018-2004 | 2004-05-01 | German | Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2003); German version EN ISO 9018:2003 |
118 | DIN EN ISO 7840-2004 | 2004-05-01 | English | Small craft - Fire resistant fuel hoses (ISO 7840:2004) |
119 | DIN EN ISO 7840-2004 | 2004-05-01 | German | Small craft - Fire resistant fuel hoses (ISO 7840:2004); German version EN ISO 7840:2004 |
120 | DIN ISO 6133-2004 | 2004-05-01 | English | Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength (ISO 6133:1998) |
121 | DIN ISO 16632-2004 | 2004-05-01 | English | Tobacco and tobacco products - Determination of water content - Gas-chromatographic method (ISO 16632:2003) |
122 | DIN IEC 61196-1-314-2004 | 2004-05-01 | German, English | Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending (IEC 46A/599/CD:2003) |
123 | DIN IEC 61196-1-314-2004 | 2004-05-01 | German, English | Coaxial communication cables - Part 1-314: Mechanical test methods - Test for bending (IEC 46A/599/CD:2003) |
124 | DIN ISO 15171-1-2004 | 2004-05-01 | German | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
125 | DIN ISO 15171-1-2004 | 2004-05-01 | English | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure (ISO 15171-1:1999) |
126 | DIN ISO 15171-2-2004 | 2004-05-01 | German | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 脳 2 end for connection under pressure (ISO 15171-2:2000) |
127 | DIN ISO 15171-2-2004 | 2004-05-01 | English | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Couplings with M 16 脳 2 end for connection under pressure (ISO 15171-2:2000) |
128 | DIN ISO 15380-2004 | 2004-05-01 | German | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002) |
129 | DIN ISO 15380-2004 | 2004-05-01 | English | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR (ISO 15380:2002) |
130 | DIN ISO 15799-2004 | 2004-05-01 | English | Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2003) |
131 | DIN ISO 15799-2004 | 2004-05-01 | German | Soil quality - Guidance on the ecotoxicological characterization of soils and soil materials (ISO 15799:2003) |
132 | DIN EN ISO 7200-2004 | 2004-05-01 | English | Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004) |
133 | DIN EN ISO 7200-2004 | 2004-05-01 | German | Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004); German version EN ISO 7200:2004 |
134 | DIN EN ISO 12193-2004 | 2004-05-01 | English | Animal and vegetable fats and oils - Determination of lead by direct graphite furnace atomic absorption spectroscopy (ISO 12193:2004) |
135 | DIN IEC 61196-1-203-2004 | 2004-05-01 | German, English | Coaxial communication cables - Part 1-203: Environmental test methods - Test for water penetration of cable (IEC 46A/598/CD:2003) |
136 | DIN IEC 61196-1-203-2004 | 2004-05-01 | German, English | Coaxial communication cables - Part 1-203: Environmental test methods - Test for water penetration of cable (IEC 46A/598/CD:2003) |
137 | DIN EN ISO 10366-2-2004 | 2004-05-01 | English | Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003) |
138 | DIN EN ISO 10366-2-2004 | 2004-05-01 | German | Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003 |
139 | DIN EN ISO 12193-2004 | 2004-05-01 | German | Animal and vegetable fats and oils - Determination of lead by direct graphite furnace atomic absorption spectroscopy (ISO 12193:2004); German version EN ISO 12193:2004 |
140 | DIN EN ISO 23429-2004 | 2004-05-01 | German | Gauging of hexagon sockets (ISO 23429:2004); German version EN ISO 23429:2004 |
141 | DVS 1704-2004 | 2004-05-01 | German | Voraussetzungen und Verfahren fuer die Erteilung von Bescheinigungen ueber die Herstellerqualifikation zum Schweissen von Stahlbauten nach DIN 18800-7:2002-09 |
142 | DVS 1183-2004 | 2004-05-01 | German | DVS庐-Lehrgang - Loeten metallischer Werkstoffe |
143 | DIN EN ISO 20843-2004 | 2004-05-01 | English | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC (ISO 20843:2003) |
144 | DIN EN ISO 20783-2-2004 | 2004-05-01 | English | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003) |
145 | DIN EN ISO 20783-2-2004 | 2004-05-01 | German | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 2: Fluids in category HFB (ISO 20783-2:2003); German version EN ISO 20783-2:2003 |
146 | DIN EN ISO 9142-2004 | 2004-05-01 | German | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003 |
147 | DIN EN ISO 9142-2004 | 2004-05-01 | English | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
148 | DIN EN ISO 20783-1-2004 | 2004-05-01 | English | Petroleum and related products - Determination of emulsion stability of fire-resistant fluids - Part 1: Fluids in category HFAE (ISO 20783-1:2003) |
149 | DIN EN ISO 20623-2004 | 2004-05-01 | English | Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003) |
150 | DIN EN ISO 14673-1-2004 | 2004-05-01 | German | Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2004); German version EN ISO 14673-1:2004 |
151 | DIN EN ISO 15831-2004 | 2004-05-01 | English | Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004) |
152 | DIN EN ISO 14673-1-2004 | 2004-05-01 | English | Milk and milk products - Determination of nitrate and nitrite contents - Part 1: Method using cadmium reduction and spectrometry (ISO 14673-1:2004) |
153 | DIN EN ISO 14673-2-2004 | 2004-05-01 | German | Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2004); German version EN ISO 14673-2:2004 |
154 | DIN EN ISO 15831-2004 | 2004-05-01 | German | Clothing - Physiological effects - Measurement of thermal insulation by means of a thermal manikin (ISO 15831:2004); German version EN ISO 15831:2004 |
155 | DIN EN ISO 20623-2004 | 2004-05-01 | German | Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003); German version EN ISO 20623:2003 |
156 | DIN EN ISO 6402-2-2004 | 2004-05-01 | English | Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003) |
157 | DIN EN ISO 8611-1-2004 | 2004-05-01 | English | Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2004) |
158 | DIN EN ISO 6402-2-2004 | 2004-05-01 | German | Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:2003); German version EN ISO 6402-2:2003 |
159 | DIN EN ISO 8113-2004 | 2004-05-01 | German | Glass containers - Resistance to vertical load - Test method (ISO 8113:2004); German version EN ISO 8113:2004 |
160 | DIN EN ISO 6385-2004 | 2004-05-01 | German | Ergonomic principles in the design of work systems (ISO 6385:2004); German version EN ISO 6385:2004 |
161 | DIN EN ISO 6385-2004 | 2004-05-01 | English | Ergonomic principles in the design of work systems (ISO 6385:2004) |
162 | DIN EN ISO 8980-2-2004 | 2004-05-01 | German | Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:2004); German version EN ISO 8980-2:2004 |
163 | DIN ISO 813-2004 | 2004-05-01 | English | Rubber, vulcanized or thermoplastic - Determination of adhesion to a rigid substrate - 90掳 peel method (ISO 813:1997) |
164 | DIN EN ISO 6941-2004 | 2004-05-01 | German | Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:2003); German version EN ISO 6941:2003 |
165 | DIN EN ISO 6941-2004 | 2004-05-01 | English | Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:2003) |
166 | DIN EN ISO 11551-2004 | 2004-05-01 | German | Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2003); German version EN ISO 11551:2003 |
167 | DIN EN ISO 11551-2004 | 2004-05-01 | English | Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2003) |
168 | DIN EN ISO 8113-2004 | 2004-05-01 | English | Glass containers - Resistance to vertical load - Test method (ISO 8113:2004) |
169 | DIN EN ISO 8611-1-2004 | 2004-05-01 | German | Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2004); German version EN ISO 8611-1:2004 |
170 | DIN EN ISO 5667-3-2004 | 2004-05-01 | English | Water quality - Sampling - Part 3: Guidance on the preservation and handling of water samples (ISO 5667-3:2003) |
171 | DIN EN ISO 4934-2004 | 2004-05-01 | English | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
172 | DIN EN ISO 18273-2004 | 2004-05-01 | German | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2004); German version EN ISO 18273:2004 |
173 | DIN EN ISO 18273-2004 | 2004-05-01 | English | Welding consumables - Wire electrodes, wires and rods for welding of aluminium and aluminium alloys - Classification (ISO 18273:2004) |
174 | DIN EN ISO 23429-2004 | 2004-05-01 | English | Gauging of hexagon sockets (ISO 23429:2004) |
175 | DIN EN ISO 4126-7-2004 | 2004-05-01 | German | Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7:2004); German version EN ISO 4126-7:2004 |
176 | DIN EN ISO 4126-1-2004 | 2004-05-01 | German | Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2004); German version EN ISO 4126-1:2004 |
177 | DIN EN ISO 4126-4-2004 | 2004-05-01 | German | Safety devices for protection against excessive pressure - Part 4: Pilot operated safety valves (ISO 4126-4:2004); German version EN ISO 4126-4:2004 |
178 | DIN 51003-2004 | 2004-05-01 | English | Total reflection X-ray fluorescence analysis (TXRF) - Terminology and general principles |
179 | DIN EN 13741-2004 | 2004-05-01 | German | Thermal performance acceptance testing of mechanical draught series wet cooling towers; German version EN 13741:2003 |
180 | DIN EN 13123-2-2004 | 2004-05-01 | English | Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test |
181 | DIN EN 13123-2-2004 | 2004-05-01 | German | Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test; German version EN 13123-2:2004 |
182 | DIN 6653-1-2004 | 2004-05-01 | German | Beverage dispensing systems - Accessories - Part 1: Beverage or base material pipework |
183 | DIN 2099-2-2004 | 2004-05-01 | German | Helical springs made of round wire and rod - Part 2: Information to be given in order to obtain the cold formed tension springs required, printed form B |
184 | DIN 5117-2004 | 2004-05-01 | German | Adjustable screw clamps |
185 | DIN EN ISO 1183-1-2004 | 2004-05-01 | English | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) |
186 | DIN EN 13200-1-2004 | 2004-05-01 | English | Spectator facilities - Part 1: Layout criteria for spectator viewing area - Specification |
187 | DIN EN 13141-1-2004 | 2004-05-01 | German | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices; German version EN 13141-1:2004 |
188 | DIN 34820-2004 | 2004-05-01 | German | Plain washers, chamfered, for steel structures |
189 | DIN 58916-2004 | 2004-05-01 | German | Hypodermic blood lancets - Point geometry, requirements and test methods |
190 | DIN EN 14274-2004 | 2004-05-01 | German | Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS); German version EN 14274:2003 |
191 | DIN EN 13141-1-2004 | 2004-05-01 | English | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 1: Externally and internally mounted air transfer devices |
192 | DIN EN 12629-5-4-2004 | 2004-05-01 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coating machines |
193 | DIN EN 12369-2-2004 | 2004-05-01 | English | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
194 | DIN EN 13200-1-2004 | 2004-05-01 | German | Spectator facilities - Part 1: Layout criteria for spectator viewing area - Specification; German version EN 13200-1:2003 |
195 | DIN EN 14278-3-2004 | 2004-05-01 | English | Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device |
196 | DIN EN 12629-5-3-2004 | 2004-05-01 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines |
197 | DIN EN 13124-2-2004 | 2004-05-01 | German | Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test; German version EN 13124-2:2004 |
198 | DIN EN 12331-2004 | 2004-05-01 | English | Food processing machinery - Mincing machines - Safety and hygiene requirements |
199 | DIN 34820-2004 | 2004-05-01 | English | Plain washers, chamfered, for steel structures |
200 | DIN EN 12385-6-2004 | 2004-05-01 | German | Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts; German version EN 12385-6:2004 |
201 | DIN EN 13076-2004 | 2004-05-01 | German | Devices to prevent pollution by backflow of potable water - Unrestricted air gap - Family A - Type A; German version EN 13076:2003 |
202 | DIN 19706-2004 | 2004-05-01 | German | Soil quality - Determination of the soil exposure risk from wind erosion |
203 | DIN EN 12385-6-2004 | 2004-05-01 | English | Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts |
204 | DIN EN 12566-1-2004 | 2004-05-01 | German | Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks (includes amendment A1:2003); German version EN 12566-1:2000 + A1:2003 |
205 | DIN EN 13614-2004 | 2004-05-01 | English | Bitumen and bituminous binders - Determination of adhesivity of bitumen emulsions by water immersion test - Aggregate method |
206 | DIN EN 13076-2004 | 2004-05-01 | English | Devices to prevent pollution by backflow of potable water - Unrestricted air gap - Family A - Type A |
207 | DIN EN 14278-3-2004 | 2004-05-01 | German | Textiles - Determination of cotton fibre stickiness - Part 3: Method using an automatic thermodetection rotating drum device; German version EN 14278-3:2004 |
208 | DIN EN 14612-2004 | 2004-05-01 | English | Space product assurance - Verification and approval of automatic machine wave soldering |
209 | DIN EN 14243-2004 | 2004-05-01 | English | Post-consumer tyre - Materials and applications; English version prEN 14243:2004 |
210 | DIN 61651-2004 | 2004-05-01 | German | Machinery cleaning cloths |
211 | DIN EN 13745-2004 | 2004-05-01 | German | Surfaces for sports areas - Determination of specular reflectance; German version EN 13745:2004 |
212 | DIN EN 13745-2004 | 2004-05-01 | English | Surfaces for sports areas - Determination of specular reflectance |
213 | DIN EN 14278-2-2004 | 2004-05-01 | German | Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device; German version EN 14278-2:2004 |
214 | DIN EN 14612-2004 | 2004-05-01 | German | Space product assurance - Verification and approval of automatic machine wave soldering; German version EN 14612:2003 |
215 | DIN 19707-2004 | 2004-05-01 | German | Soil quality - Classification of the nutrient supply conditions of soil |
216 | DIN EN 12629-5-1-2004 | 2004-05-01 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis |
217 | DIN EN 12629-5-2-2004 | 2004-05-01 | English | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-2: Pipe making machines manufacturing in the horizontal axis |
218 | DIN 25475-1-2004 | 2004-05-01 | German | Nuclear facilities - Operational monitoring - Part 1: Monitoring of structure-borne sound for loose parts detection |
219 | DIN EN 13741-2004 | 2004-05-01 | English | Thermal performance acceptance testing of mechanical draught series wet cooling towers |
220 | DIN 19516-2004 | 2004-05-01 | German | WC seats - Requirements and test methods |
221 | DIN EN 62028-2004 | 2004-05-01 | German | General methods of measurement for digital television receivers (IEC 62028:2002); German version EN 62028:2004 |
222 | DIN 3394-1-2004 | 2004-05-01 | German | Automatic control valves - Part 1: Pressure relief, safety and regulating valves for pressure above 4 bar up to 16 bar |
223 | DIN EN 14278-2-2004 | 2004-05-01 | English | Textiles - Determination of cotton fibre stickiness - Part 2: Method using an automatic thermodetection plate device |
224 | DIN EN 13135-1-2004 | 2004-05-01 | English | Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment |
225 | DIN EN 13135-1-2004 | 2004-05-01 | German | Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment; German version EN 13135-1:2003 |
226 | DIN EN 12792 Berichtigung 1-2004 | 2004-05-01 | German | Corrigenda to DIN EN 12792:2004-01 |
227 | DIN EN 14274-2004 | 2004-05-01 | English | Automotive fuels - Assessment of petrol and diesel quality - Fuel quality monitoring system (FQMS) |
228 | DIN EN 14413-1-2004 | 2004-05-01 | English | Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 1: Level 1 |
229 | DIN EN 14413-1-2004 | 2004-05-01 | German | Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 1: Level 1; German version EN 14413-1:2004 |
230 | DIN EN 14413-2-2004 | 2004-05-01 | German | Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 2: Level 2; German version EN 14413-2:2004 |
231 | DIN EN 14413-2-2004 | 2004-05-01 | English | Recreational Diving Services - Safety related minimum requirements for the training of scuba instructors - Part 2: Level 2 |
232 | DIN 2099-2-2004 | 2004-05-01 | English | Helical springs made of round wire and rod - Part 2: Information to be given in order to obtain the cold formed tension springs required, printed form B |
233 | DIN EN 13124-2-2004 | 2004-05-01 | English | Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test |
234 | DIN CEN/TS 14825-2004 | 2004-05-01 | German | Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Testing and rating at part load conditions; German version CEN/TS 14825:2003 |
235 | DIN EN 60873-1, VDE 0410-1-2004 | 2004-05-00 | German | Electrical and pneumatic analogue chart recorders for use in industrial-process control systems - Part 1: Methods for performance evaluation (IEC 60873-1:2003); German version EN 60873-1:2004 |
236 | DIN VDE 0119-207-11, VDE 0119-207-11-2004 | 2004-05-00 | German | State of the railway vehicles - Control and instrumentation technology - Part 207-11: Tachograph and recording devices |
237 | DIN EN 50123-1 Berichtigung 1, VDE 0115-300-1 Berichtigung 1-2004 | 2004-05-00 | German | Corrigendum to DIN EN 50123-1 (VDE 0115 Teil 300-1):2003-12 |
238 | DIN EN 61821 Beiblatt 1, VDE 0161-103 Beiblatt 1-2004 | 2004-05-00 | German | Electrical installations for lighting and beaconing of aerodromes -Maintenance of aeronautical ground lighting constant current series; Supplement 1: Form |
239 | DIN EN 13990-2004 | 2004-04-01 | English | Wood flooring - Solid softwood floor boards |
240 | DIN EN 12046-1-2004 | 2004-04-01 | English | Operating forces - Test method - Part 1: Windows |
241 | DIN EN ISO 2360-2004 | 2004-04-01 | German | Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003); German version EN ISO 2360:2003 |
242 | DIN EN ISO 2360-2004 | 2004-04-01 | English | Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003) |
243 | DIN EN 14134-2004 | 2004-04-01 | German | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems; German version EN 14134:2004 |
244 | DIN EN 60264-3-1-2004 | 2004-04-01 | German | Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions (IEC 60264-3-1:1999 + A1:2003); German version EN 60264-3-1:2000 + A1:2003 |
245 | DIN EN 61603-7-2004 | 2004-04-01 | German | Transmission systems for audio and/or video and related signals using infra-red radiation - Part 7: Digital audio signals for conference and similar applications (IEC 61603-7:2003); German version EN 61603-7:2003 |
246 | DIN EN 14467-2004 | 2004-04-01 | German | Recreational diving services - Requirements for recreational scuba diving service providers; German version EN 14467:2004 |
247 | DIN EN 14201-2004 | 2004-04-01 | German | Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing; German version EN 14201:2004 |
248 | DIN V 42331-2004 | 2004-04-01 | German | Technical Report on Pulsed Field Magnetometry (IEC 62331:2003) |
249 | DIN 1027-2004 | 2004-04-01 | German | Steel bars - Hot-rolled zees with round edges - Dimensions, masses, tolerances, static values |
250 | DIN EN 14467-2004 | 2004-04-01 | English | Recreational diving services - Requirements for recreational scuba diving service providers |
251 | DIN EN 14396-2004 | 2004-04-01 | German | Fixed ladders for manholes; German version EN 14396:2004 |
252 | DIN EN ISO 3826-1-2004 | 2004-04-01 | English | Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO 3826-1:2003) |
253 | DIN 1027-2004 | 2004-04-01 | English | Bars made of hot rolled steel Zee sections with rounded roots adn toes - Dimensions, mass and static parameters |
254 | DIN EN 14201-2004 | 2004-04-01 | English | Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing |
255 | DIN EN 14396-2004 | 2004-04-01 | English | Fixed ladders for manholes |
256 | DIN 1022-2004 | 2004-04-01 | German | Steel bars - Hot-rolled square root equal angles (LS-steel) - Dimensions, masses and tolerances |
257 | DIN EN 60264-2-1-2004 | 2004-04-01 | German | Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Basic dimensions (IEC 60264-2-1:1989 + A1:2003); German version EN 60264-2-1:1994 + A1:2003 |
258 | DIN 1022-2004 | 2004-04-01 | English | Bars made hot-rolled square-edged steel equal angles (LS-steel bars) - Dimensions and mass |
259 | DIN EN 60068-2-43-2004 | 2004-04-01 | German | Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections (IEC 60068-2-43:2003); German version EN 60068-2-43:2003 |
260 | DIN EN 60068-2-42-2004 | 2004-04-01 | German | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections (IEC 60068-2-42:2003); German version EN 60068-2-42:2003 |
261 | DIN EN 14134-2004 | 2004-04-01 | English | Ventilation for buildings - Performance testing and installation checks of residential ventilation systems |
262 | DIN V 20000-102-2004 | 2004-04-01 | German | Use of building products in construction works - Part 102: Aggregates according to DIN EN 13383-1:2002-08 |
263 | DIN CEN/TS 14588-2004 | 2004-04-01 | German | Solid Biofuels - Terminology, definitions and descriptions; German version CEN/TS 14588:2003 |
264 | DIN EN 1279-2 Berichtigung 1-2004 | 2004-04-01 | German | Corrigenda to DIN EN 1279-2:2003-06 |
265 | DIN EN 14251-2004 | 2004-04-01 | German | Structural round timber - Test methods; German version EN 14251:2003 |
266 | DIN EN 13141-6-2004 | 2004-04-01 | German | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling; German version EN 13141-6:2004 |
267 | DIN 6827-5-2004 | 2004-04-01 | German | Recording in medical application of ionizing radiation - Part 5: Radiological report |
268 | DIN EN 13241-1-2004 | 2004-04-01 | German | Industrial, commercial and garage doors and gates - Product Standard - Part 1: Products without fire resistance or smoke control characteristics; German version EN 13241-1:2003 |
269 | DIN EN 13241-1-2004 | 2004-04-01 | English | Industrial, commercial and garage doors and gates - Product Standard - Part 1: Products without fire resistance or smoke control characteristics |
270 | DIN 6647-4-2004 | 2004-04-01 | English | Means of packaging - Cylindrical beverage containers - Part 4: Non-returnable packaging withallowable operating pressure up to 3 bar, nominal volume up to 60 litres |
271 | DIN EN 13872-2004 | 2004-04-01 | German | Method of test for smoothing and/or levelling compounds - Determination of shrinkage; German version EN 13872:2004 |
272 | DIN EN ISO 284-2004 | 2004-04-01 | English | Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2003) |
273 | DIN EN 12255-15-2004 | 2004-04-01 | English | Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants |
274 | DIN 18560-4-2004 | 2004-04-01 | English | Floor screeds - Part 4: Screeds laid on separated layer |
275 | DIN EN 14240-2004 | 2004-04-01 | German | Ventilation for buildings - Chilled ceilings - Testing and rating; German version EN 14240:2004 |
276 | DIN 18560-4-2004 | 2004-04-01 | German | Floor screeds - Part 4: Screeds laid on separated layer |
277 | DIN EN 13201-3-2004 | 2004-04-01 | German | Road lighting - Part 3: Calculation of performance; German version EN 13201-3:2003 |
278 | DIN EN 13141-3-2004 | 2004-04-01 | English | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use |
279 | DIN 18560-7-2004 | 2004-04-01 | German | Floor screeds - Part 7: Heavy-duty screeds (industrial screeds) |
280 | DIN EN 14340-2004 | 2004-04-01 | German | Leather - Physical and mechanical tests - Determination of water repellency of garment leather; German version EN 14340:2004 |
281 | DIN EN 12811-2-2004 | 2004-04-01 | German | Temporary works equipment - Part 2: Information on materials; German version EN 12811-2:2004 |
282 | DIN EN 14240-2004 | 2004-04-01 | English | Ventilation for buildings - Chilled ceilings - Testing and rating |
283 | DIN EN 13141-4-2004 | 2004-04-01 | English | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 4: Fans used in residential systems |
284 | DIN EN 13437-2004 | 2004-04-01 | English | Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart |
285 | DIN EN 13437-2004 | 2004-04-01 | German | Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart; German version EN 13437:2003 |
286 | DIN EN 13201-2-2004 | 2004-04-01 | German | Road lighting - Part 2: Performance requirements; German version EN 13201-2:2003 |
287 | DIN EN 13440-2004 | 2004-04-01 | English | Packaging - Rate of recycling - Definition and method of calculation |
288 | DIN EN 12354-6-2004 | 2004-04-01 | German | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces; German version EN 12354-6:2003 |
289 | DIN EN 13440-2004 | 2004-04-01 | German | Packaging - Rate of recycling - Definition and method of calculation; German version EN 13440:2003 |
290 | DIN EN 13201-2-2004 | 2004-04-01 | English | Road lighting - Part 2: Performance requirements |
291 | DIN EN 12873-1-2004 | 2004-04-01 | English | Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products |
292 | DIN EN 13439-2004 | 2004-04-01 | German | Packaging - Rate of energy recovery - Definition and method of calculation; German version EN 13439:2003 |
293 | DIN EN 13286-7-2004 | 2004-04-01 | German | Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures; German version EN 13286-7:2004 |
294 | DIN EN 60749-25-2004 | 2004-04-01 | German | Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling (IEC 60749-25:2003); German version EN 60749-25:2003 |
295 | DIN EN 13880-6-2004 | 2004-04-01 | English | Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing |
296 | DIN EN 13880-6-2004 | 2004-04-01 | German | Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003 |
297 | DIN EN 13286-47-2004 | 2004-04-01 | German | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling; German version EN 13286-47:2004 |
298 | DIN EN 13201-3-2004 | 2004-04-01 | English | Road lighting - Part 3: Calculation of performance |
299 | DIN EN 60264-5-1-2004 | 2004-04-01 | German | Packaging of winding wires - Part 5-1: Cylindrical barrelled delivery spools with conical flanges - Basic dimensions (IEC 60264-5-1:1997 + A1:2003); German version EN 60264-5-1:1997 + A1:2003 |
300 | DIN 18560-7-2004 | 2004-04-01 | English | Floor screeds - Part 7: Heavy-duty screeds (industrial screeds) |
301 | DIN EN 13141-3-2004 | 2004-04-01 | German | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 3: Range hoods for residential use; German version EN 13141-3:2004 |
302 | DIN EN 13201-4-2004 | 2004-04-01 | German | Road lighting - Part 4: Methods of measuring lighting performance; German version EN 13201-4:2003 |
303 | DIN EN 13990-2004 | 2004-04-01 | German | Wood flooring - Solid softwood floor boards; German version EN 13990:2004 |
304 | DIN EN 14340-2004 | 2004-04-01 | English | Leather - Physical and mechanical tests - Determination of water repellency of garment leather |
305 | DIN EN 14239-2004 | 2004-04-01 | English | Ventilation for buildings - Ductwork - Measurement of ductwork surface area |
306 | DIN EN 13451-11-2004 | 2004-04-01 | German | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads; German version EN 13451-11:2004 |
307 | DIN EN 13201-4-2004 | 2004-04-01 | English | Road lighting - Part 4: Methods of measuring lighting performance |
308 | DIN EN 13141-6-2004 | 2004-04-01 | English | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 6: Exhaust ventilation system packages used in a single dwelling |
309 | DIN EN 12811-2-2004 | 2004-04-01 | English | Temporary works equipment - Part 2: Information on materials |
310 | DIN EN 13451-11-2004 | 2004-04-01 | English | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
311 | DIN EN 13142-2004 | 2004-04-01 | English | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics |
312 | DIN 59051-2004 | 2004-04-01 | English | Bars made of hot rolled square-edged steel T sections - Dimensions and mass |
313 | DIN EN 14016-1-2004 | 2004-04-01 | English | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements |
314 | DIN EN 14016-1-2004 | 2004-04-01 | German | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements; German version EN 14016-1:2004 |
315 | DIN EN 14016-2-2004 | 2004-04-01 | German | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods; German version EN 14016-2:2004 |
316 | DIN EN 14016-2-2004 | 2004-04-01 | English | Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 2: Test methods |
317 | DIN EN 13286-47-2004 | 2004-04-01 | English | Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling |
318 | DIN 6868-7-2004 | 2004-04-01 | German | Image quality assurance in X-ray departments - Part 7: Constancy testing of mammographic X-ray equipment |
319 | DIN EN 62315-1-2004 | 2004-04-01 | German | DTV profiles for uncompressed digital video interfaces - Part 1: General (IEC 62315-1:2003); German version EN 62315-1:2003 |
320 | DIN EN 13439-2004 | 2004-04-01 | English | Packaging - Rate of energy recovery - Definition and method of calculation |
321 | DIN EN 14239-2004 | 2004-04-01 | German | Ventilation for buildings - Ductwork - Measurement of ductwork surface area; German Version EN 14239:2004 |
322 | DIN EN 12873-1-2004 | 2004-04-01 | German | Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products; German version EN 12873-1:2003 |
323 | DIN EN 13286-7-2004 | 2004-04-01 | English | Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures |
324 | DIN 59051-2004 | 2004-04-01 | German | Steel bars - Hot-rolled sharpedged T-bars - Dimensions, masses, tolerances |
325 | DIN EN 12354-6-2004 | 2004-04-01 | English | Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 6: Sound absorption in enclosed spaces |
326 | DIN V 18004-2004 | 2004-04-01 | German | Use of building products in construction works - Test methods for aggregates according to DIN V 20000-103 and DIN V 20000-104 |
327 | DIN EN ISO 284-2004 | 2004-04-01 | German | Conveyor belts - Electrical conductivity - Specification and test method (ISO 284:2003); German version EN ISO 284:2003 |
328 | DIN EN 12255-15-2004 | 2004-04-01 | German | Wastewater treatment plants - Part 15: Measurement of the oxygen transfer in clean water in aeration tanks of activated sludge plants; German version EN 12255-15:2003 |
329 | DIN EN 13872-2004 | 2004-04-01 | English | Method of test for smoothing and/or levelling compounds - Determination of shrinkage |
330 | DIN EN 14251-2004 | 2004-04-01 | English | Structural round timber - Test methods |
331 | DIN EN 13528-3-2004 | 2004-04-01 | English | Ambient air quality - Diffuse samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance |
332 | DIN EN 13142-2004 | 2004-04-01 | German | Ventilation for buildings - Components/products for residential ventilation - Required and optional performance characteristics; German version EN 13142:2004 |
333 | DIN EN 13528-3-2004 | 2004-04-01 | German | Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003 |
334 | DIN EN ISO 3826-1-2004 | 2004-04-01 | German | Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO 3826-1:2003); German version EN ISO 3826-1:2003 |
335 | DIN EN 60375-2004 | 2004-04-01 | German | Vereinbarungen fuer Stromkreise und magnetische Kreise (IEC 60375:2003); Deutsche Fassung EN 60375:2003 |
336 | DIN IEC 61196-1-1-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-1: Capability approval for coaxial communication cables - Generic specification (IEC 46A/600/CD:2003) |
337 | DIN ISO 10381-4-2004 | 2004-04-01 | English | Soil quality - Sampling - Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites (ISO 10381-4:2003) |
338 | DIN ISO 10381-4-2004 | 2004-04-01 | German | Soil quality - Sampling - Part 4: Guidance on the procedure for investigation of natural, near-natural and cultivated sites (ISO 10381-4:2003) |
339 | DIN ISO 13472-1-2004 | 2004-04-01 | German | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002) |
340 | DIN ISO 13472-1-2004 | 2004-04-01 | English | Acoustics - Measurement of sound absorption properties of road surfaces in situ - Part 1: Extended surface method (ISO 13472-1:2002) |
341 | DIN EN ISO 15680-2004 | 2004-04-01 | English | Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003) |
342 | DIN EN ISO 15680-2004 | 2004-04-01 | German | Water quality - Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption (ISO 15680:2003); German version EN ISO 15680:2003 |
343 | DIN EN ISO 11600-2004 | 2004-04-01 | German | Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002); German version EN ISO 11600:2003 |
344 | DIN EN ISO 11600-2004 | 2004-04-01 | English | Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002) |
345 | DIN EN ISO 11446-2004 | 2004-04-01 | German | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage (ISO 11446:2004); German version EN ISO 11446:2004 |
346 | DIN EN ISO 11446-2004 | 2004-04-01 | English | Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage (ISO 11446:2004) |
347 | DIN EN ISO 4126-6-2004 | 2004-04-01 | English | Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003) |
348 | DIN EN ISO 4126-6-2004 | 2004-04-01 | German | Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003); German version EN ISO 4126-6:2003 |
349 | DIN IEC 60300-3-10-2004 | 2004-04-01 | German | Dependability management - Part 3-10: Application guide - Maintainability (IEC 60300-3-10:2001) |
350 | DIN IEC 61196-1-1-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-1: Capability approval for coaxial communication cables - Generic specification (IEC 46A/600/CD:2003) |
351 | DIN IEC 61196-1-100-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-100: Electrical test methods - General requirements (IEC 46A/601/CD:2003) |
352 | DIN IEC 61196-1-100-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-100: Electrical test methods - General requirements (IEC 46A/601/CD:2003) |
353 | DIN EN ISO 14689-1-2004 | 2004-04-01 | English | Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description (ISO 14689-1:2003) |
354 | DIN EN ISO 14689-1-2004 | 2004-04-01 | German | Geotechnical investigation and testing - Identification and classification of rock - Part 1: Identification and description (ISO 14689-1:2003); German version EN ISO 14689-1:2003 |
355 | DIN EN ISO 14698-1-2004 | 2004-04-01 | German | Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003); German version EN ISO 14698-1:2003 |
356 | DIN EN ISO 18104-2004 | 2004-04-01 | English | Health Informatics - Integration of a reference terminology model for nursing (ISO 18104:2003); German version EN ISO 18104:2003, text in English |
357 | DIN EN ISO 18104-2004 | 2004-04-01 | English | Health Informatics - Integration of a reference terminology model for nursing (ISO 18104:2003); German version EN ISO 18104:2003, text in English |
358 | DIN EN ISO 18279-2004 | 2004-04-01 | English | Brazing - Imperfections in brazed joints (ISO 18279:2003) |
359 | DIN EN ISO 18279-2004 | 2004-04-01 | German | Brazing - Imperfections in brazed joints (ISO 18279:2003); German version EN ISO 18279:2003 |
360 | DVS 0604-2004 | 2004-04-01 | German | Voraussetzungen zur Gestaltung und Verarbeitung von schweissgeeigneten Aluminium-Druckgussbauteilen |
361 | DVS 0922-5-2004 | 2004-04-01 | German | Industrierobotersysteme zum Schutzgasschweissen - Positioniersysteme fuer Werkstuecke und Industrieroboter |
362 | DIN IEC 61196-1-112-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance) (IEC 46A/602/CD:2003) |
363 | DIN IEC 61196-1-112-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-112: Electrical test methods - Test for return loss (uniformity of impedance) (IEC 46A/602/CD:2003) |
364 | DIN IEC 61196-1-122-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables (IEC 46A/583/CD:2003) |
365 | DIN IEC 61196-1-122-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-122: Electrical test methods - Test for cross-talk between coaxial cables (IEC 46A/583/CD:2003) |
366 | DVS 3202-2004 | 2004-04-01 | German | Steuerungen von Elektronenstrahl-Schweissanlagen |
367 | DIN EN ISO 12100-2-2004 | 2004-04-01 | German | Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) German version EN ISO 12100-2:2003 |
368 | DIN EN ISO 12100-2-2004 | 2004-04-01 | English | Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) |
369 | DVS-EWF 1197-1 Beiblatt 1-2004 | 2004-04-01 | German | DVS庐-EWF-Lehrgang Europaeischer Thermischer Spritzer - Theoretische Ausbildung |
370 | DVS-EWF 1197-1-2004 | 2004-04-01 | German | DVS庐-EWF-Lehrgang Europaeischer Thermischer Spritzer |
371 | DVS-EWF 1197-1 Beiblatt 2-2004 | 2004-04-01 | German | DVS庐-EWF-Lehrgang Europaeischer Thermischer Spritzer - Praktische Ausbildung |
372 | DVS-EWF 1197-2-2004 | 2004-04-01 | German | DVS庐-EWF-Lehrgang Europaeischer Thermischer Spritzer - Pruefungsordnung |
373 | DIN IEC 61196-1-206-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence (IEC 46A/596/CD:2003) |
374 | DIN IEC 61196-1-206-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-206: Environmental test methods - Climatic sequence (IEC 46A/596/CD:2003) |
375 | DIN IEC 61196-1-302-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-302: Mechanical test methods - Test for Eccentricity of Dielectric (IEC 46A/584/CD:2003) |
376 | DIN IEC 61196-1-302-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-302: Mechanical test methods - Test for Eccentricity of Dielectric (IEC 46A/584/CD:2003) |
377 | DIN IEC 61196-1-324-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-324: Mechanical test methods - Test for Abrasion Resistance of Cable (IEC 46A/585/CD:2003) |
378 | DIN IEC 61196-1-324-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 1-324: Mechanical test methods - Test for Abrasion Resistance of Cable (IEC 46A/585/CD:2003) |
379 | DIN EN ISO 7389-2004 | 2004-04-01 | German | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002); German version EN ISO 7389:2003 |
380 | DIN EN ISO 7389-2004 | 2004-04-01 | English | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
381 | DIN EN ISO 7390-2004 | 2004-04-01 | German | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002); German version EN ISO 7390:2003 |
382 | DIN EN ISO 7390-2004 | 2004-04-01 | English | Building construction - Jointing products - Determination of resistance to flow of sealants (ISO 7390:2002) |
383 | DIN IEC 61196-5-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables (IEC 46A/603/CD:2003) |
384 | DIN IEC 61196-5-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 5: Sectional specification for CATV trunk and distribution cables (IEC 46A/603/CD:2003) |
385 | DIN IEC 61196-6-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 6: Sectional specification for CATV drop cables (IEC 46A/604/CD:2003) |
386 | DIN IEC 61196-6-2004 | 2004-04-01 | German, English | Coaxial communication cables - Part 6: Sectional specification for CATV drop cables (IEC 46A/604/CD:2003) |
387 | VG V 96942-1-2004 | 2004-04-01 | German, English | Electrical connectors and plug and socket devices - Connectors with bayonet coupling, up to 500 mA, 10-way, up to 50 V, unscreened - Part 1: Requirements, tests - Detail specification |
388 | VG V 96942-2-2004 | 2004-04-01 | German, English | Electrical connectors and plug- and socket devices - Connectors with bayonet coupling, up to 500 mA, 10-way, up to 50 V, unscreened - Part 2: Assembly instruction - Detail specification |
389 | DIN EN ISO 12100-1-2004 | 2004-04-01 | English | Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003) |
390 | VG V 96942-3-2004 | 2004-04-01 | German, English | Electrical connectors and plug- and socket devises - Connectors with bayonet coupling; up to 500 mA, 10-way, up to 50 V, unscreened - Part 3: Mating dimensions - Detail specification |
391 | VG V 96942-4-2004 | 2004-04-01 | German, English | Electrical connectors for low-frequency - Connectors with bayonet coupling, up to 500 mA, 10-way, up to 50 V, unscreened - Part 4: Dimensions, mass - Detail specification |
392 | DIN EN ISO 12100-1-2004 | 2004-04-01 | German | Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003); German version EN ISO 12100-1:2003 |
393 | DIN ISO 16853-2004 | 2004-04-01 | English | Textile machinery - Sliver cans, rectangular - Main dimensions and tolerances (ISO 16853:2003) |
394 | DIN IEC 62153-4-4-2004 | 2004-04-01 | German, English | Metallic communication cable test methods - Part 4-4: Electro Magnetic Compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation "as" up to and above 3 GHz (IEC 46A/581/CD:2003) |
395 | DIN IEC 62153-4-4-2004 | 2004-04-01 | German, English | Metallic communication cable test methods - Part 4-4: Electro Magnetic Compatibility (EMC) - Shielded screening attenuation, test method for measuring of the screening attenuation "as" up to and above 3 GHz (IEC 46A/581/CD:2003) |
396 | VG 95345-1-2004 | 2004-04-01 | German, English | Electrical and electronic circuit breakers - Part 1: Survey |
397 | DIN ISO 705-2004 | 2004-04-01 | English | Rubber latex - Determination of density between 5 掳C and 40 掳C (ISO 705:1994) |
398 | DIN ISO 705-2004 | 2004-04-01 | German | Rubber latex - Determination of density between 5 掳C and 40 掳C (ISO 705:1994) |
399 | VG 96919-2-2004 | 2004-04-01 | German, English | Shrouded connectors - 2P+PE, 3P+PE, 3P+N+PE, 16 A to 125 A, 50 V to 690 V, watertight - Part 2: Mounting dimensions - Detail specification |
400 | DIN ISO 1940-1-2004 | 2004-04-01 | English | Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances (ISO 1940-1:2003) |
401 | DIN ISO 1940-1-2004 | 2004-04-01 | German | Mechanical vibration - Balance quality requirements for rotors in a constant (rigid) state - Part 1: Specification and verification of balance tolerances (ISO 1940-1:2003) |
402 | DIN ISO 2028-2004 | 2004-04-01 | German | Synthetic rubber latex - Preparation of dry polymer (ISO 2028:1999) |
403 | DIN ISO 2028-2004 | 2004-04-01 | English | Synthetic rubber latex - Preparation of dry polymer (ISO 2028:1999) |
404 | DIN ISO 8122-2004 | 2004-04-01 | English | Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter (ISO 8122:2003) |
405 | DIN ISO 7475-2004 | 2004-04-01 | English | Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station (ISO 7475:2002) |
406 | DIN ISO 7475-2004 | 2004-04-01 | German | Mechanical vibration - Balancing machines - Enclosures and other protective measures for the measuring station (ISO 7475:2002) |
407 | DIN ISO 8122-2004 | 2004-04-01 | German | Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter (ISO 8122:2003) |
408 | DIN EN 12195-1-2004 | 2004-04-01 | English | Load restraint assemblies on road vehicles - Safety - Part 1: Calculation of lashing forces |
409 | DIN EN 238-2004 | 2004-04-01 | German | Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996 + A1:2003 |
410 | DIN EN 1885-2004 | 2004-04-01 | English | Feather and down - Terms and definitions (includes amendment A1:2003) |
411 | DIN EN 1975-2004 | 2004-04-01 | German | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres; German version EN 1975:1999 + A1:2003 |
412 | DIN EN 1975-2004 | 2004-04-01 | English | Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litres (includes Amendment A1:2003) |
413 | DIN EN 113/A1-2004 | 2004-04-01 | English | Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values |
414 | DIN EN 12195-4-2004 | 2004-04-01 | German | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes; German version EN 12195-4:2003 |
415 | DIN EN 10169-1-2004 | 2004-04-01 | German | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods); German version EN 10169-1:2003 |
416 | DIN EN 113/A1-2004 | 2004-04-01 | German | Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values; German version EN 113:1996/A1:2004 |
417 | DIN EN 12046-1-2004 | 2004-04-01 | German | Operating forces - Test method - Part 1: Windows; German version EN 12046-1:2003 |
418 | DIN EN 10169-1-2004 | 2004-04-01 | English | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
419 | DIN EN 740/A1-2004 | 2004-04-01 | German | Anaesthetic workstations and their modules - Particular requirements; German version EN 740:1998/A1:2004 |
420 | DIN EN 1885-2004 | 2004-04-01 | German | Feather and down - Terms and definitions (includes amendment A1:2003); German version EN 1885:1998 + A1:2003 |
421 | DIN EN 12195-4-2004 | 2004-04-01 | English | Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes |
422 | DIN EN ISO 14698-1-2004 | 2004-04-01 | English | Cleanrooms and associated controlled environments - Biocontamination control - Part 1: General principles and methods (ISO 14698-1:2003) |
423 | DIN EN 113/A1-2004 | 2004-04-01 | English | Wood preservatives - Test method for determining the protective effectiveness against wood destroying basidiomycetes - Determination of the toxic values |
424 | DIN VDE 0119-207-3, VDE 0119-207-3-2004 | 2004-04-00 | German | State of the railway vehicles - Control and instrumentation technology - Part 207-3: Automatic traction and braking control |
425 | DIN EN 60999-2, VDE 0609-101-2004 | 2004-04-00 | German | Connecting devices for low voltage circuits for household and similar purposes - Part 2-4: Particular requirements for twist-on connecting devices (IEC 60998-2-4:2004, modified); German version EN 60998-2-4:2005 |
426 | DIN VDE 0119-207-8, VDE 0119-207-8-2004 | 2004-04-00 | German | State of the railway vehicles - Control and instrumentation technology - Part 207-8: On-board equipment - GNT (overspeed control for tilting trains) |
427 | DIN VDE 0119-207-1, VDE 0119-207-1-2004 | 2004-04-00 | German | State of the railway vehicles - Control and instrumentation technology - Part 207-1: On-board equipment - Analogue train radio |
428 | DIN EN 1468-2004 | 2004-03-01 | German | Natural stone - Rough slabs - Requirements; German version EN 1468:2003 |
429 | DIN EN 1468-2004 | 2004-03-01 | English | Natural stone - Rough slabs - Requirements |
430 | DIN 4420-1-2004 | 2004-03-01 | German | Service and working scaffolds - Part 1: Service scaffolds - Performance requirements, general design, structural design |
431 | DIN EN 13578-2004 | 2004-03-01 | German | Products and systems for the protection and repair of concrete structure - Test method - Compatibility on wet concrete; German version EN 13578:2003 |
432 | DIN EN 301502-2004 | 2004-03-01 | German | Harmonized ENfor Global System for Mobile communications (GSM) - Base Station and Repeater equipment covering essential requirements under article 3.2 of the R&TTE directive (GSM 13.21 version 8.1.2 Release 1999) (Endorsement of the English version EN 301502 V8.1.2 (2001-07) as German standard) |
433 | DIN EN 301503-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - Mobile radio interface layer 3 specification - Radio Resource Control Protocol (GSM 04.18 version 8.4.1 Release 1999) (Endorsement of the English version EN 301503 V8.4.1 (2000-10) as German standard) |
434 | DIN EN 301657-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Specification, functional model and information flows - Private User Mobility (PUM) - Call handling additional network features [ISO/IEC 17877 (2000) modified] (Endorsement of the English version EN 301657 V1.2.1 (2003-06) as German standard) |
435 | DIN EN 300172-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Circuit-mode basic services [ISO/IEC 11572 (2000) modified] (Endorsement of the English version EN 300172 V1.5.1 (2003-06) as German standard) |
436 | DIN EN 300019-1-2-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-2: Classification of environmental conditions; Transportation (Endorsement of the English version EN 300019-1-2 V2.1.4 (2003-04) as German standard) |
437 | DIN EN 300425-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Specification, functional model and information flows - Call intrusion supplementary service [ISO/IEC 14845 (1996) modified] (Endorsement of the English version EN 300425 V1.3.1 (2003-06) as German standard) |
438 | DIN EN 300258-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Specification, functional model and information flows - Path replacement additional network feature [ISO/IEC 13863 (1998), modified] (Endorsement of the English version EN 300258 V1.3.1 (2003-06) as German standard) |
439 | DIN EN 300019-1-1-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-1: Classification of environmental conditions; Storage (Endorsement of the English version EN 300019-1-1 V2.1.4 (2003-04) as German standard) |
440 | DIN EN 60534-2-5-2004 | 2004-03-01 | German | Industrial process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery (IEC 60534-2-5:2003); German version EN 60534-2-5:2003 |
441 | DIN 2137-12-2004 | 2004-03-01 | German | Text and office systems - Keyboards - Part 12: German keyboard for data and text processing; Key arrangement and allocation for portable computers |
442 | DIN EN 300019-1-0-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-0: Classification of environmental conditions; Introduction (Endorsement of the English version EN 300019-1-0 V2.1.2 (2003-05) as German standard) |
443 | DIN EN 60444-8-2004 | 2004-03-01 | German | Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units (IEC 60444-8:2003); German version EN 60444-8:2003 |
444 | DIN 10167-2004 | 2004-03-01 | English | Detection of Escherichia coli O 157 in meat and meat products |
445 | DIN EN 300019-1-4-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations (Endorsement of the English version EN 300019-1-4 V2.1.1 (2003-03) as German standard) |
446 | DIN 10167-2004 | 2004-03-01 | German | Detection of Escherichia coli O 157 in meat and meat products |
447 | DIN EN 61131-1-2004 | 2004-03-01 | German | Programmable controllers - Part 1: General information (IEC 61131-1:2003); German version EN 61131-1:2003 |
448 | DIN EN 60862-1-2004 | 2004-03-01 | German | Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification (IEC 60862-1:2003); German version EN 60862-1:2003 |
449 | DIN 27204-5-2004 | 2004-03-01 | German | State of railway vehicles - Running gear - Part 5: Rubber suspension systems |
450 | DIN EN 300019-1-5-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-5: Classification of environmental conditions; Ground vehicle installations (Endorsement of the English version EN 300019-1-5 V2.1.4 (2003-04) as German standard) |
451 | DIN EN 300019-1-6-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-6: Classification of environmental conditions; Ship environments (Endorsement of the English version EN 300019-1-6 V2.1.4 (2003-04) as German standard) |
452 | DIN EN 14503-2004 | 2004-03-01 | German | Inland navigation vessels - Harbours for inland navigation; German version EN 14503:2003 |
453 | DIN EN 14503-2004 | 2004-03-01 | English | Inland navigation vessels - Harbours for inland navigation |
454 | DIN EN 14485-2004 | 2004-03-01 | English | Health informatics - Guidance for handling personal health data in international applications in the context of the EU data protection directive; German version EN 14485:2003, text in English |
455 | DIN EN 14485-2004 | 2004-03-01 | English | Health informatics - Guidance for handling personal health data in international applications in the context of the EU data protection directive; German version EN 14485:2003, text in English |
456 | DIN 53125-2004 | 2004-03-01 | English | Determining the chloride content in aqueous extracts of paper and board |
457 | DIN 54518-2004 | 2004-03-01 | German | Testing of paper and board - Compression strength, short span test |
458 | DIN EN 300019-1-7-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-7: Classification of environmental conditions; Portable and non-stationary use (Endorsement of the English version EN 300019-1-7 V2.1.4 (2003-04) as German standard) |
459 | DIN V 20000-412-2004 | 2004-03-01 | German | Application of building products in structures - Part 412: Rules for the application of masonry mortar according DIN EN 998-2:2003-09 |
460 | DIN EN 302408-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - CTS-FP Radio subsystem (GSM 05.56 version 8.0.1 Release 1999) (Endorsement of the English version EN 302408 V8.0.1 (2000-10) as German standard) |
461 | DIN EN 302407-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - CTS supervising system layer 3 specification (GSM 04.57 version 8.0.1 Release 1999) (Endorsement of the English version EN 302407 V8.0.1 (2000-08) as German standard) |
462 | DIN EN 302406-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - CTS radio interface layer 3 specification (GSM 04.56 version 8.0.1 Release 1999) (Endorsement of the English version EN 302406 V8.0.1 (2000-08) as German standard) |
463 | DIN EN 302404-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - Lower Layers of the CTS Radio Interface - Stage 2 (GSM 03.52 version 8.0.1 Release 1999) (Endorsement of the English version EN 302404 V8.0.1 (2000-09) as German standard) |
464 | DIN EN 302403-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - GSM Cordless Telephony System (CTS), Phase 1 - Service description - Stage 1 (GSM 02.56 version 8.0.1 Release 1999) (Endorsement of the English version EN 302403 V8.0.1 (2000-10) as German standard) |
465 | DIN EN 300019-1-8-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-8: Classification of environmental conditions; Stationary use at underground locations (Endorsement of the English version EN 300019-1-8 V2.1.4 (2003-04) as German standard) |
466 | DIN EN 300019-1-3-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-3: Classification of environmental conditions; Stationary use at weatherprotected locations (Endorsement of the English version EN 300019-1-3 V2.1.1 (2003-03) as German standard) |
467 | DIN EN 300019-2-0-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-0: Specification of environmental tests; Introduction (Endorsement of the English version EN 300019-2-0 V2.1.2 (2003-05) as German standard) |
468 | DIN EN 301419-1-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2) - Attachment requirements for Global System for Mobile communications (GSM) - Part 1: Mobile stations in the GSM 900 and DCS 1800 bands - Access (GSM 13.01 version 4.1.1) (Endorsement of the English version EN 301419-1 V4.1.1 (2000-04) as German standard) |
469 | DIN EN 300019-2-1-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-1: Specification of environmental tests; Storage (Endorsement of the English version EN 300019-2-1 V2.1.2 (2000-09) as German standard) |
470 | DIN EN 301419-2-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - Attachment requirements for Global System for Mobile communications (GSM) - High Speed Circuit Switched Data (HSCSD) Multislot Mobile Stations - Access (GSM 13.34 version 5.1.1 Release 1996) (Endorsement of the English version EN 301419-2 V5.1.1 (2000-04) as German standard) |
471 | DIN EN 301419-7-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - Attachment requirements for Global System for Mobile communications (GSM) - Railways Band (R-GSM) - Mobile Stations - Access (GSM 13.67 version 5.1.1 Release 1996) (Endorsement of the English version EN 301419-7 V5.1.1 (2000-08) as German standard) |
472 | DIN EN 300019-2-3-2004 | 2004-03-01 | German | Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-3: Specification of environmental tests; Stationary use at weather protected locations (Endorsement of the English version EN 300019-2-3 V2.2.1 (2003-03) as German standard) |
473 | DIN EN 301991-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Short message service [ISO/IEC 21990 (2002) modified] (Endorsement of the English version EN 301991 V1.1.1 (2003-06) as German standard) |
474 | DIN EN 301990-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Specification, functional model and information flows - Short message service supplementary service [ISO/IEC 21989 (2002) modified] (Endorsement of the English version EN 301990 V1.1.1 (2003-06) as German standard) |
475 | DIN EN 300171-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Service description, functional capabilities and information flows - Circuit-mode 64 kbit/s bearer services [ISO/IEC 11574 (2000) modified] (Endorsement of the English version EN 300171 V1.3.1 (2003-06) as German standard) |
476 | DIN CEN/TS 1793-4-2004 | 2004-03-01 | German | Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 4: Intrinsic characteristics - In-situ values of sound diffraction; German version CEN/TS 1793-4:2003 |
477 | DIN EN 14327-2004 | 2004-03-01 | English | Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather |
478 | DIN EN 14327-2004 | 2004-03-01 | German | Leather - Physical and mechanical tests - Determination of abrasion resistance of automotive leather; German version EN 14327:2003 |
479 | DIN EN 14326-2004 | 2004-03-01 | English | Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame |
480 | DIN CEN/TS 14577-2004 | 2004-03-01 | German | Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons; German version CEN/TS 14577:2003 |
481 | DIN EN 14326-2004 | 2004-03-01 | German | Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame; German version EN 14326:2003 |
482 | DIN EN 14210-2004 | 2004-03-01 | English | Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
483 | DIN EN 14210-2004 | 2004-03-01 | German | Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method; German version EN 14210:2003 |
484 | DIN EN 301828-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Specification, functional model and information flows - Wireless terminal authentication supplementary services [ISO/IEC 15432 (1999) modified] (Endorsement of the English version EN 301828 V1.1.1 (2003-06) as German standard) |
485 | DIN EN 301826-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Specification, functional model and information flows - Wireless terminal call handling additional network features [ISO/IEC 15430 (1999) modified] (Endorsement of the English version EN 301826 V1.1.1 (2003-06) as German standard) |
486 | DIN EN 301824-2004 | 2004-03-01 | German | Private Integrated Services Network (PISN) - Specification, functional model and information flows - Wireless terminal location registration supplementary service and wireless terminal information exchange additional network feature [ISO/IEC 15428 (1999) modified] (Endorsement of the English version EN 301824 V1.1.1 (2003-06) as German standard) |
487 | DIN EN 14141-2004 | 2004-03-01 | English | Valves for natural gas transportation in pipelines - Performance requirements and tests |
488 | DIN EN 14141-2004 | 2004-03-01 | German | Valves for natural gas transportation in pipelines - Performance requirements and tests; German version EN 14141:2003 |
489 | DIN EN 14128-2004 | 2004-03-01 | English | Durability of wood and wood-based products - Performances criteria for curative wood preservatives as determined by biological tests |
490 | DIN EN 14128-2004 | 2004-03-01 | German | Durability of wood and wood-based products - Performances criteria for curative wood preservatives as determined by biological tests; German version EN 14128:2003 |
491 | DIN EN 301705-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - Substitution and muting of lost frames for Adaptive Multi Rate (AMR) speech traffic channels (GSM 06.91 version 7.1.1 Release 1998) (Endorsement of the English version EN 301705 V7.1.1 (2000-04) as German standard) |
492 | DIN EN 301704-2004 | 2004-03-01 | German | Digital cellular telecommunications system (Phase 2+) - Adaptive Multi-Rate (AMR) speech transcoding (GSM 06.90 version 7.2.1 Release 1998) (Endorsement of the English version EN 301704 V7.2.1 (2000-04) as German standard) |
493 | DIN EN 12810-1-2004 | 2004-03-01 | English | Facade scaffolds made of prefabricated components - Part 1: Products specifications |
494 | DIN EN 12811-1-2004 | 2004-03-01 | German | Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design; German version EN 12811-1:2003 |
495 | DIN EN 12810-2-2004 | 2004-03-01 | English | Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design |
496 | DIN EN 12811-1-2004 | 2004-03-01 | English | Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design |
497 | DIN EN 12810-2-2004 | 2004-03-01 | German | Facade scaffolds made of prefabricated components - Part 2: Particular methods of structural design; German version EN 12810-2:2003 |
498 | DIN EN 12810-1-2004 | 2004-03-01 | German | Facade scaffolds made of prefabricated components - Part 1: Products specifications; German version EN 12810-1:2003 |
499 | DIN EN ISO 15876-5-2004 | 2004-03-01 | English | Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003) |
500 | DIN EN ISO 15875-5-2004 | 2004-03-01 | German | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003); German version EN ISO 15875-5:2003 |
|