We offers a broad range of engineering and technical standards, specifications, codes in PDF for personal education purpose with affortable price. Any requirements please contact fdcrw@qq.com.

STANDARD SEARCH->ASME STANDARD LIST:

Total count:4819 records, Page:1 |2 |3 |4 |5 |6 |7 |8 |9 |10 |
Posstandard Numberpublication dateLanguageDescription
1ASME/BPVC CASE N-786-20132013-01-01EnglishN-786 Alternative Requirements for Sleeve Reinforcement of Class 2 and 3 Moderate-Energy Carbon Steel Piping Section XI, Division 1
2ASME/BPVC CASE N-788-20132013-01-01EnglishN-788 Third Party NDE Certification Organizations Section XI, Division 1
3ASME/BPVC CASE N-789-20132013-01-01EnglishN-789 Alternative Requirements for Pad Reinforcement of Class 2 and 3 Moderate-Energy Carbon Steel Piping for Raw Water Service Section XI, Division 1
4ASME/BPVC CASE N-791-20132013-01-01EnglishN-791 Shear Screw and Sleeve Splice Section III, Division 2
5ASME/BPVC CASE N-792-1-20132013-01-01EnglishN-792-1 Fatigue Evaluations Including Environmental Effects Section III, Division 1 ERRATA SUPP 2
6ASME/BPVC CASE N-793-20132013-01-01EnglishN-793 Extruded Steel Sleeves With Parallel Threaded Ends Section III, Division 2
7ASME/BPVC CASE N-794-20132013-01-01EnglishN-794 Swaged Splice With Threaded Ends Section III, Division 2
8ASME/BPVC CASE N-795-20132013-01-01EnglishN-795 Alternative Requirements for BWR Class 1 System Leakage Test Pressure Following Repair/Replacement Activities Section XI, Division 1
9ASME/BPVC CASE N-796-20132013-01-01EnglishN-796 Threaded Sleeves With Parallel Threads Cut on Upsized Bar Ends Section III, Division 2
10ASME/BPVC CASE N-798-20132013-01-01EnglishN-798 Alternative Pressure Testing Requirements for Class 1 Piping Between the First and Second Vent, Drain, and Test Isolation Devices Section XI, Division 1
11ASME/BPVC CASE N-799-20132013-01-01EnglishN-799 Dissimilar Metal Welds Joining Vessel Nozzles to Components Section XI, Division 1
12ASME/BPVC CASE N-800-20132013-01-01EnglishN-800 Alternative Pressure Testing Requirements for Class 1 Piping Between the First and Second Injection Valves Section XI, Division 1
13ASME/BPVC CASE N-801-1-20132013-01-01EnglishN-801-1 Rules for Repair of N-Stamped Class 1, 2, and 3 Components by Organization Other Than the N Certificate Holder That Originally Stamped the Component Being Repaired Section III, Division 1
14ASME/BPVC CASE N-803-20132013-01-01EnglishN-803 Similar and Dissimilar Metal Welding Using Ambient Temperature Automatic or Machine Dry Underwater Laser Beam Welding (ULBW) Temper Bead Technique Section XI, Division 1
15ASME/BPVC CASE N-804-20132013-01-01EnglishN-804 Alternative Preheat Temperature for Austenitic Welds in P-No. 1 Material Without PWHT Section III, Division 1
16ASME/BPVC CASE N-805-20132013-01-01EnglishN-805 Alternative to Class 1 Extended Boundary End of Interval or Class 2 System Leakage Testing of the Reactor Vessel Head Flange O-Ring Leak-Detection System Section XI, Division 1
17ASME/BPVC CASE N-806-20132013-01-01EnglishN-806 Evaluation of Metal Loss in Class 2 and 3 Metallic Piping Buried in a Back-Filled Trench Section XI, Division 1 ERRATA SUPP 2
18ASME/BPVC CASE N-806-20132013-01-01EnglishN-806 Evaluation of Metal Loss in Class 2 and 3 Metallic Piping Buried in a Back-Filled Trench Section XI, Division 1
19ASME/BPVC CASE N-807-20132013-01-01EnglishN-807 Use of Grades 75 and 80 Reinforcement in Concrete Containments Section III, Division 2
20ASME/BPVC CASE N-811-20132013-01-01EnglishN-811 Alternative Qualification Requirements for Concrete Level III Inspection Personnel Section III, Division 2
21ASME/BPVC CASE N-812-1-20132013-01-01EnglishN-812-1 Alternate Creep-Fatigue Damage Envelope for 9Cr-1Mo-V Steel Section III, Divisions 1 and 5 SUPP 1
22ASME/BPVC CASE N-813-20132013-01-01EnglishN-813 Alternative Requirements for Preservice Volumetric and Surface Examination Section XI, Division 1
23ASME/BPVC CASE N-815-20132013-01-01EnglishN-815 Use of SA-358/SA-358M Grades Fabricated as Class 3 or Class 4 Welded Pipe, Class CS Core Support Construction Section III, Division 1
24ASME/BPVC CASE N-816-20132013-01-01EnglishN-816 Use of Temper Bead Weld Repair Rules Adopted in 2010 Edition and Earlier Editions Section III, Division 1
25ASME/BPVC CASE N-817-20132013-01-01EnglishN-817 Use of Die Forgings, SB-247, UNS A96061, Class T6, With Thickness ≤ 4.000 in. Material, Class 2 Construction (1992 Edition or Later) Section III, Division 1
26ASME/BPVC CASE N-818-20132013-01-01EnglishN-818 Use of Analytical Evaluation Approach for Acceptance of Full Penetration Butt Welds in Lieu of Weld Repair Section III, Division 1
27ASME/BPVC CASE N-819-20132013-01-01EnglishN-819 Use of Die Forgings, SB-247, UNS A96061, Class T6, With Thickness ≤ 4.000 in. Material, Class 2 Construction (1989 Edition With the 1991 Addenda or Earlier) Section III, Division 1
28ASME/BPVC CASE N-820-20132013-01-01EnglishN-820 Twisting of Horizontal Prestressing Tendons Section III, Division 2
29ASME/BPVC CASE N-822-1-20132013-01-01EnglishN-822-1 Application of the ASME Certification Mark Section III, Divisions 1, 2, 3, and 5
30ASME/BPVC CASE N-823-20132013-01-01EnglishN-823 Visual Examination Section XI, Division 1
31ASME/BPVC CASE N-824-20132013-01-01EnglishN-824 Ultrasonic Examination of Cast Austenitic Piping Welds From the Outside Surface Section XI, Division 1
32ASME/BPVC CASE N-826-20132013-01-01EnglishN-826 Ultrasonic Examination of Full Penetration Vessel Weld Joints in Figures IWB-2500-1 Through IWB-2500-6 Section XI, Division 1
33ASME/BPVC CASE N-828-20132013-01-01EnglishN-828 Alternative Nonmetallic Material Manufacturers and Constituent Suppliers Quality System Program Requirements, Section III, NCA-3900, 2010 Edition, and Earlier Editions and Addenda Section III, Divisions 1 and 2
34ASME/BPVC CASE N-829-20132013-01-01EnglishN-829 Austenitic Stainless Steel Cladding and Nickel Base Cladding Using Ambient Temperature Machine GTAW Temper Bead Technique Section XI, Division 1
35ASME/BPVC CASE N-833-20132013-01-01EnglishN-833 Minimum Nonprestressed Reinforcement in the Containment Base Mat or Slab Required for Concrete Crack Control Section III, Division 2 SUPP 1
36ASME/BPVC CODE CASES: BOILERS AND PRESSURE VESSELS-20132013-01-01EnglishCODE CASES: BOILERS AND PRESSURE VESSELS
37ASME/BPVC CODE CASES: BPV SUPPLEMENT 1-20132013-01-01EnglishCODE CASES: BOILERS AND PRESSURE VESSELS - SUPPLEMENT 1 SUMMARY OF CHANGES
38ASME/BPVC CODE CASES: BPV SUPPLEMENT 2-20132013-01-01EnglishCODE CASES: BOILERS AND PRESSURE VESSELS - SUPPLEMENT 2 SUMMARY OF CHANGES
39ASME/BPVC CODE CASES: NUC SUPPLEMENT 1-20132013-01-01EnglishCODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 1
40ASME/BPVC CODE CASES: NUC SUPPLEMENT 2-20132013-01-01EnglishCODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 2
41ASME/BPVC CODE CASES: NUCLEAR COMPONENTS-20132013-01-01EnglishCODE CASES: NUCLEAR COMPONENTS
42ASME/BPVC 2426-20132013-01-01English2426 Titanium Nickel-Molybdenum Ruthenium Alloy, Ti-0.8Ni-0.3Mo-0.1Ru Section VIII, Division 1
43ASME/BPVC 2428-3-20132013-01-01English2428-3 Attachment of Tubes to Flat Tubesheets Using Complete Penetration Welds Section VIII, Division 1
44ASME/BPVC 2427-20132013-01-01English2427 Chromium-Nickel-Molybdenum-Nitrogen-Tungsten Duplex Stainless Steel UNS S39274 Plate Section VIII, Division 1
45"cart">ASME/BPVC CODE CASES: NUC SUPPLEMENT 6-20132013-01-01EnglishCODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 6
46"cart">ASME/BPVC CODE CASES: NUC SUPPLEMENT 5-20132013-01-01EnglishCODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 5
47"cart">ASME/BPVC CODE CASES: NUC SUPPLEMENT 4-20132013-01-01EnglishCODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 4
48"cart">ASME/BPVC CODE CASES: NUC SUPPLEMENT 3-20132013-01-01EnglishCODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 3
49"cart">ASME/BPVC CODE CASES: BPV SUPPLEMENT 6-20132013-01-01EnglishCODE CASES: BOILERS AND PRESSURE VESSELS - SUPPLEMENT 6 SUMMARY OF CHANGES
50ASME/BPVC 2424-1-20132013-01-01English2424-1 Alternative Attachment Details for Welded Stayed Construction Using Dimpled or Embossed Plate Section VIII, Division 1
51ASME/BPVC 2421-20132013-01-01English2421 Single Fillet Lap Joint for Heat Exchanger Tube Welds Section VIII, Division 1
52ASME/BPVC 2419-20132013-01-01English2419 Use of SA-268 Ferritic Stainless Steel Welded Tubing, TP430 Ti, UNS S43036 Section VIII, Division 1
53"cart">ASME/BPVC CODE CASES: BPV SUPPLEMENT 5-20132013-01-01EnglishCODE CASES: BOILERS AND PRESSURE VESSELS - SUPPLEMENT 5 SUMMARY OF CHANGES
54"cart">ASME/BPVC CODE CASES: BPV SUPPLEMENT 4-20132013-01-01EnglishCODE CASES: BOILERS AND PRESSURE VESSELS - SUPPLEMENT 4 SUMMARY OF CHANGES
55"cart">ASME/BPVC 2725-20132013-01-01English2725 Polymer Material for Heating Boiler Components Section IV, SUPP 4
56"cart">ASME/BPVC 2714-1-20132013-01-01English2714-1 Application of the ASME Certification Mark Section VIII, Divisions 1, 2, and 3 ANNULLED SUPP 6
57"cart">ASME/BPVC 2712-1-20132013-01-01English2712-1 Spherical Intermediate Head or End Closure Without Straight Flange Section VIII, Division 1 SUPP 6
58"cart">ASME/BPVC 2702-1-20132013-01-01EnglishCase 2702-1 Seamless Ni-25Cr-20Co Material Section I, Supp 3
59"cart">ASME/BPVC 2684-2-20132013-01-01English2684-1 Ni-23Cr-7W, UNS N06674, Alloy Seamless Pipe and Tube Section I
60"cart">ASME/BPVC 2669-20132013-01-01English2669 UNS S32202, 22Cr-2Ni-Mo-N Austenitic-Ferritic Lean Duplex Stainless Steel Section VIII, Division 1, SUPP 4, ANNULLED
61"cart">ASME/BPVC 2652-1-20132013-01-01English2652-1 UNS N06696 Seamless Pipe, Tube, and Plate Section I and Section VIII, Division 1 SUPP 6
62"cart">ASME/BPVC 2644-20132013-01-01English2644 Punching and Shaving of Tube Holes Section IV, SUPP 3, ANNULLED
63"cart">ASME/BPVC 2642-20132013-01-01English2642 Chinese Steel Material Q345R Section VIII, Division 1, SUPP 4, ANNULLED
64"cart">ASME/BPVC 2620-2-20132013-01-01English2620-2 Use of UNS S32101 Ferritic/Austenitic Stainless Steel Plate, Sheet, Strip, Pipe, and Tube in the Manufacture of Part HLW Water Heaters and Storage Tanks Section IV SUPP 5
65"cart">ASME/BPVC 2616-1-20132013-01-01English2616-1 2014-T6 Aluminum Hand Forgings for Nonwelded Construction Section VIII, Division 1, Supp 3
66"cart">ASME/BPVC 2592-1-20132013-01-01English2592-1 Use of Welds That Are Not Ground or Machined Section VIII, Division 3
67"cart">ASME/BPVC 2564-4-20132013-01-01English2564-4 Impulsively Loaded Pressure Vessels Section VIII, Division 3 SUPP 5
68"cart">ASME/BPVC 2497-3-20132013-01-01English2497-3 Unalloyed and Palladium or Ruthenium Corrosion Enhanced Titanium Grades With 58 ksi Minimum UTS, UNS R50400, R52400, R52402, and R52404 Section VIII, Division 1 ANNULLED SUPP 6
69"cart">ASME/BPVC 2496-2-20132013-01-01English2496-2 27Cr-7.6Ni-1Mo-2.3W-N UNS S32808, Solution Annealed Austenitic-Ferritic Duplex Stainless Steel Plate, Seamless Tubing, Seamless Pipe, Forgings, and Bar Section VIII, Divisions 1 and 2, Supp 4
70"cart">ASME/BPVC 2418-2-20132013-01-01English2418-2 SA-182, SA-240, SA-479, SA-789, SA-790, and SA-815 21Cr-5Mn-1.5Ni-Cu-N (UNS S32101) Austenitic-Ferritic Duplex Stainless Steel Section VIII, Division 1 SUPP 6
71ASME/BPVC 2418-1-20132013-01-01English2418-1 SA-182, SA-240, and SA-479 21Cr-5Mn-1.5Ni-Cu-N (UNS S32101) Austenitic-Ferritic Duplex Stainless Steel Section VIII, Division 1
72ASME/BPVC 2416-20132013-01-01English2416 Use of 15Cr-5Ni-3Cu (UNS S15500) Section VIII, Division 2
73ASME/BPVC 2411-20132013-01-01English2411 Use of Polymer Material for Bolted Box Headers Section IV
74"cart">ASME/BPVC 2396-20132013-01-01English2396 Alternative Method of Vessel Markings Section VIII, Division 1, SUPP 4 ANNULLED
75"cart">ASME/BPVC 2382-6-20132013-01-01English2382-6 Use of Sand Cast Aluminum Alloy EN AC-AlSi10Mg(a), F Temper, in the Manufacture of Hot Water Heating Boilers Under Part HA Section IV, SUPP 3, ANNULLED
76"cart">ASME/BPVC 2369-20132013-01-01English2369 Alternative Rules for Pressure Testing Vessels Utilizing a Bolted Flat Blind Flange as Removable or Remote End Closures Section VIII, Division 1, Supp 4 ANNULLED
77"cart">ASME/BPVC 2349-1-20132013-01-01English2349-1 Alternative Rules for Corner Joint Fabrication Section VIII, Division 1 ANNULLED SUPP 6
78"cart">ASME/BPVC 2344-4-20132013-01-01English2344-4 Use of Sand Cast Aluminum Alloy A356.0, T6 Temper, for the Manufacture of Hot Water Heating Boilers Under Part HA Section IV, SUPP 3, ANNULLED
79"cart">ASME/BPVC 2296-20132013-01-01English2296 Use of Titanium-Clad Carbon Steel Plate in the As-Rolled Condition Section VIII, Divisions 1 and 2 ANNULLED SUPP 6
80"cart">ASME/BPVC 2286-5-20132013-01-01English2286-5 Alternative Rules for Determining Allowable External Pressure and Compressive Stresses for Cylinders, Cones, Spheres, and Formed Heads Section VIII, Division 1, SUPP 3
81"cart">ASME/BPVC 2260-2-20132013-01-01English2260-2 Alternative Rules for Design of Ellipsoidal and Torispherical Formed Heads1 Section VIII, Division 1, SUPP 4
82"cart">ASME/BPVC 2245-2-20132013-01-01English2245-2 25Cr-7.5Ni-3.5Mo-N-Cu-W Alloy, UNS S32760 Forgings, Plate, Sheet, Strip, Bar, Seamless and Welded Pipe and Tube, and Fittings Section VIII, Division 1, SUPP 4, ANNULLED
83ASME/BPVC 2410-20132013-01-01English2410 Low Silicon, Aluminum Killed Forgings to SA-508 Grade 4N, Class 1, 2, or 3 Section VIII, Division 2 ANNULLED
84"cart">ASME/BPVC 2235-13-20132013-01-01English2235-13 Use of Ultrasonic Examination in Lieu of Radiography Section I; Section XII SUPP 6
85"cart">ASME/BPVC 2196-3-20132013-01-01English2196-3 Austenitic Stainless Steel Seamless Tubes and Pipe, Seamless Wrought Fittings, Plate, and Sheet, 18Cr-11NiCb-N, UNS S34751, 347LN Section VIII, Division 1 Supp 4
86"cart">ASME/BPVC 2153-2-20132013-01-01English2153-2 Use of Semi-Permanent Mold Cast Aluminum Alloy A356.0 for the Manufacture of Heating Boilers Under Part HC Section IV, SUPP 3, ANNULLED
87ASME/BPVC 2408-1-20132013-01-01English2408-1 Alternative Method of Pressure Relief Device Marking Section VIII, Divisions 1 and 2
88ASME/BPVC 2407-20132013-01-01English2407 Pneumatic Test Section VIII, Division 1
89ASME/BPVC 2404-1-20132013-01-01English2404-1 Copper Beryllium Alloy (UNS C17510) for Code Construction Section VIII, Division 1
90ASME/BPVC 2403-20132013-01-01English2403 Aluminum Alloy (Aluminum-6.3Magnesium) for Code Construction Section VIII, Division 1
91ASME/BPVC 2402-1-20132013-01-01English2402-1 SA-995, UNS J92205, (CD3MN), Austenitic/Ferritic Duplex Stainless Steel Section VIII, Division 1
92ASME/BPVC 2401-20132013-01-01English2401 ASME SA-240 Type 316 Plate Section VIII, Division 1
93ASME/BPVC 2400-20132013-01-01English2400 Alternative Rules for the Postweld Heat Treatment of Finned Tubes Section VIII, Division 1
94ASME/BPVC 2397-20132013-01-01English2397 Pressure Relief Valves That Exceed the Capability of Testing Laboratories Sections I and VIII, Division 1
95ASME/BPVC 2396-20132013-01-01English2396 Alternative Method of Vessel Markings Section VIII, Division 1
96ASME/BPVC 2385-1-20132013-01-01English2385-1 37Ni-30Co-28Cr-2.75Si Alloy (UNS N12160) Section VIII, Division 1
97ASME/BPVC 2382-6-20132013-01-01English2382-6 Use of Sand Cast Aluminum Alloy EN AC-AlSi10Mg(a), F Temper, in the Manufacture of Hot Water Heating Boilers Under Part HA Section IV
98ASME/BPVC 2378-20132013-01-01English2378 Use of a Power Actuated Pressure Relief Valve for High Pressure Vessels Instead of Pressure Relief Valves or Rupture Disks Section VIII, Division 3
99ASME/BPVC 2377-20132013-01-01English2377 Radiographic Requirements for SA-612 Steel Plate Section VIII, Division 1
100ASME/BPVC 2369-20132013-01-01English2369 Alternative Rules for Pressure Testing Vessels Utilizing a Bolted Flat Blind Flange as Removable or Remote End Closures Section VIII, Division 1
101ASME/BPVC 2367-1-20132013-01-01English2367-1 Marking of Rupture Disk Devices Fully Enclosed in a Rupture Disk Holder or System Section VIII, Divisions 1 and 2
102ASME/BPVC 2361-20132013-01-01English2361 Alternative Stresses That May Be Used in the Equation in UG-101(k) for Calculating the Maximum Allowable Working Pressure at Design Temperature Section VIII, Division 1
103ASME/BPVC 2359-2-20132013-01-01English2359-2 Ni-25Cr-9.5Fe-2.1Al Alloy (UNS N06025) Section I and Section VIII, Division 1
104ASME/BPVC 2357-2-20132013-01-01English2357-2 Ni-Fe-Cr Alloy N08801 for Water-Wetted Service Section I
105ASME/BPVC 2353-1-20132013-01-01English2353-1 Seamless 1.15Ni-0.65Cu-Mo-Cb Material Section I
106ASME/BPVC 2351-20132013-01-01English2351 Alternative Rules for Brazing Qualifications Section VIII, Division 1
107ASME/BPVC 2350-20132013-01-01English2350 Strength of Aluminum Brazed Joints Up to 400°F Section VIII, Division 1
108ASME/BPVC 2349-1-20132013-01-01English2349-1 Alternative Rules for Corner Joint Fabrication Section VIII, Division 1
109ASME/BPVC 2346-1-20132013-01-01English2346-1 Alternative Rules for Ellipsoidal or Torispherical Heads Having Integral Backing Strip Attached to Shells Section VIII, Division 1
110ASME/BPVC 2344-4-20132013-01-01English2344-4 Use of Sand Cast Aluminum Alloy A356.0, T6 Temper, for the Manufacture of Hot Water Heating Boilers Under Part HA Section IV
111ASME/BPVC 2334-20132013-01-01English2334 Single Fillet Lap Joints in the Shell of a Shell-and-Tube Heat Exchanger Section VIII, Division 1
112ASME/BPVC 2329-1-20132013-01-01English2329-1 Use of SA-278 Material for Part HLW Construction of Lined Headers Section IV
113ASME/BPVC 2328-2-20132013-01-01English2328-2 Austenitic Stainless Steel Tubes, SA-213/SA-213M, UNS S30432, 18Cr-9Ni-3Cu-Cb-N Section I
114"cart">ASME/BPVC 2143-2-20132013-01-01English2143-2 F-Number Grouping for Ni-Cr-Fe, Classification UNS W86152 and UNS W86056 Welding Electrodes Section I; Section II, Part A; Section II, Part B; Section II, Part C; Section II, Part D; Section IV; Section VIII, Division 1; Section VIII, Divis
115"cart">ASME/BPVC 1750-24-20132013-01-01English1750-24 Materials for Bodies, Bonnets, Yokes, Housings, and Holders of Pressure Relief Devices Sections I; VIII, Division 1; X; and XII, SUPP 4
116ASME/BPVC 2327-2-20132013-01-01English2327-2 9Cr-1Mo-1W-Cb Material Section I
117ASME/BPVC 2324-1-20132013-01-01English2324-1 Use of Automated Ultrasound Leak Detection System in Lieu of Visual Inspections Required by UG-100(d) Section VIII, Division 1
118ASME/BPVC 2321-1-20132013-01-01English2321-1 Exemption From Postweld Heat Treatment for P-No. 4 or P-No. 5A Tube-to-Tubesheet Seal Welds Section VIII, Division 1
119ASME/BPVC 2318-20132013-01-01English2318 Alternative Flanged Joint Design for Nuclear Material Fluidized Bed Reactors Section VIII, Division I
120ASME/BPVC 2313-20132013-01-01English2313 Electric Resistance and Autogenous Welded Tubing With 100% Longitudinal Weld Joint Factor for Use in Feedwater Heaters Section VIII, Division 1
121ASME/BPVC 2309-20132013-01-01English2309 Alternative Rules for Ultrasonic Examination of Cladding and Base Metal Clad Interfaces Section V
122ASME/BPVC 2156-1-20132013-01-01English2156-1 Use of Rod and Bar for Hollow Cylindrical-Shaped Parts Larger Than NPS 4 Section VIII, Division 1
123ASME/BPVC 2153-2-20132013-01-01English2153-2 Use of Semi-Permanent Mold Cast Aluminum Alloy A356.0 for the Manufacture of Heating Boilers Under Part HC Section IV
124ASME/BPVC 2151-1-20132013-01-01English2151-1 3 Chromium-1 Molybdenum-1/4 Vanadium Columbium-Calcium Alloy Steel Plates and Forgings Section VIII, Divisions 1 and 2
125ASME/BPVC 2150-20132013-01-01English2150 Large-End Cone-to-Cylinder Junction for 30 < α ≤ 60 Degrees Section VIII, Division 1
126ASME/BPVC 2146-20132013-01-01English2146 24Cr-17Ni-6Mn-4.5Mo-N, UNS S34565, Austenitic Stainless Steel Forgings, Bar, Fittings, Welded and Seamless Pipe and Tube, Plate, Sheet, and Strip Section VIII, Division 1
127ASME/BPVC 2143-1-20132013-01-01English2143-1 F-Number Grouping for Ni-Cr-Fe, Classification UNS W86152 Welding Electrode Section IX (Applicable to all Sections, including Section III, Division 1, and Section XI)
128ASME/BPVC 2142-4-20132013-01-01English2142-4 F-Number Grouping for Ni-Cr-Fe Filler Metals Section IX
129ASME/BPVC 2130-4-20132013-01-01English2130-4 ASTM A 841/A 841M-98 Plate Section VIII, Divisions 1, 2, and 3
130ASME/BPVC 2127-3-20132013-01-01English2127-3 Type 304LN (Alloy UNS S30453) Austenitic Stainless Steel Section VIII, Division 1
131ASME/BPVC 2120-1-20132013-01-01English2120-1 Nickel-Iron-Chromium-Molybdenum-Copper Low Carbon Alloy (UNS N08926) for Code Construction Section VIII, Division 1
132ASME/BPVC 2096-2-20132013-01-01English2096-2 Nondestructive Examination As an Alternative to Hydrostatic Testing for SA-376 Section II, Part A
133ASME/BPVC 2093-20132013-01-01English2093 A 439 Type D-2 Austenitic Ductile Iron Section VIII, Division 1
134ASME/BPVC 2073-1-20132013-01-01English2073-1 SA-487 Grade CA6NM Class A Section I
135ASME/BPVC 2063-6-20132013-01-01English2063-6 Ni-22Cr-14W-2Mo-La Alloy (UNS N06230) Section I
136ASME/BPVC 2055-2-20132013-01-01English2055-2 Pneumatic Testing of Pressure Vessels, UG-20 Section VIII, Division 1
137ASME/BPVC 2038-5-20132013-01-01English2038-5 25Cr-22Ni-2Mo-N, UNS S31050, Austenitic Stainless Steel Forgings Section VIII, Divisions 1 and 2
138ASME/BPVC 2016-1-20132013-01-01English2016-1 Alternative Requirements for Seal Welding of Threaded Connections, UF-32(b) Section VIII, Division 1
139ASME/BPVC 1998-20132013-01-01English1998 Drilled Holes Not Penetrating Through Vessel Wall Section I
140ASME/BPVC 1993-6-20132013-01-01English1993-6 Precipitation-Hardening Nickel Alloy (UNS N07718) Used as Bolting Material Section I
141ASME/BPVC 1968-1-20132013-01-01English1968-1 Use of Acoustic Emission Examination in Lieu of Radiography Section VIII, Division 1
142ASME/BPVC 1949-4-20132013-01-01English1949-4 Forgings of Nickel-Iron-Chromium Alloys N08800 and N08810 Section I
143ASME/BPVC 1936-3-20132013-01-01English1936-3 Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825) for Water Wetted Service Section I
144ASME/BPVC 1935-4-20132013-01-01English1935-4 Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625) Section I
145ASME/BPVC 1934-20132013-01-01English1934 Alternative Rules for Heat Treatment of Boiler External Piping Section I
146ASME/BPVC 1932-5-20132013-01-01English1932-5 SA-736/SA-736M Plates and ASTM A 859/A 859M-95 Forgings Section VIII, Divisions 1, 2, and 3
147ASME/BPVC 1924-2-20132013-01-01English1924-2 Nickel-Molybdenum-Chromium Alloy (UNS N10276) Section I
148ASME/BPVC 1876-5-20132013-01-01English1876-5 Design of Safety Valve Connections Section I SUPP 1
149ASME/BPVC 1855-1-20132013-01-01English1855-1 Section VIII, Division 1, Unfired Steam Boiler in Section I System Section I
150ASME/BPVC 1849-1-20132013-01-01English1849-1 Gray Cast Iron Castings Section I
151ASME/BPVC 1827-3-20132013-01-01English1827-3 Nickel-Chromium-Iron (Alloy N06600) for Water-Wetted Service Section I
152ASME/BPVC 1750-23-20132013-01-01English1750-23 Materials for Bodies, Bonnets, Yokes, Housings, and Holders of Pressure Relief Devices Sections I; VIII, Division 1; and X
153ASME/BPVC 1518-5-20132013-01-01English1518-5 Weld Joint Examination for Pneumatically Tested Pressure Vessels Section VIII, Division 1
154ASME/BPVC 1325-18-20132013-01-01English1325-18 Nickel-Iron-Chromium Alloys 800 and 800H (UNS N08800 and N08810) and Nickel-Iron-ChromiumMolybdenum-Copper Low-Carbon Alloy (UNS N08028) Section I
155ASME/BPVC 2180-6-20132013-01-01English2180-6 Seamless 12Cr-2W Material Sections I and VIII, Division 1
156ASME/BPVC CASE N-812-20132013-01-01EnglishN-812 Alternate Creep-Fatigue Damage Envelope for 9Cr-1Mo-V Steel Section III, Division 1
157ASME/BPVC CASE N-792-1-20132013-01-01EnglishN-792-1 Fatigue Evaluations Including Environmental Effects Section III, Division 1
158ASME/BPVC CASE N-770-2-20132013-01-01EnglishN-770-2 Alternative Examination Requirements and Acceptance Standards for Class 1 PWR Piping and Vessel Nozzle Butt Welds Fabricated With UNS N06082 or UNS W86182 Weld Filler Material With or Without Application of Listed Mitigation Activities Section
159ASME/BPVC CASE N-766-20132013-01-01EnglishN-766 Nickel Alloy Reactor Coolant Inlay and Onlay for Mitigation of PWR Full Penetration Circumferential Nickel Alloy Dissimilar Metal Welds in Class 1 Items Section XI, Division 1
160ASME/BPVC CASE N-755-1-20132013-01-01EnglishN-755-1 Use of Polyethylene (PE) Class 3 Plastic Pipe Section III, Division I and Section XI
161ASME/BPVC CASE N-754-20132013-01-01EnglishN-754 Optimized Structural Dissimilar Metal Weld Overlay for Mitigation of PWR Class 1 Items Section XI, Division 1
162ASME/BPVC CASE N-739-1-20132013-01-01EnglishN-739-1 Alternative Qualification Requirements for Personnel Performing Class CC Concrete and Post-Tensioning System Visual Examinations Section XI, Division 1
163ASME/BPVC CASE N-716-20132013-01-01EnglishN-716 Alternative Piping Classification and Examination Requirements Section XI, Division 1
164ASME/BPVC CASE N-694-1-20132013-01-01EnglishN-694-1 Evaluation Procedure and Acceptance Criteria for PWR Reactor Vessel Head Penetration Nozzles Section XI, Division 1
165ASME/BPVC CASE N-638-6-20132013-01-01EnglishN-638-6 Similar and Dissimilar Metal Welding Using Ambient Temperature Machine GTAW Temper Bead Technique Section XI, Division 1
166ASME/BPVC CASE N-606-1-20132013-01-01EnglishN-606-1 Similar and Dissimilar Metal Welding Using Ambient Temperature Machine GTAW Temper Bead Technique for BWR CRD Housing/Stub Tube Repairs Section XI, Division 1
167ASME/BPVC CASE N-557-1-20132013-01-01EnglishN-557-1 In-Place Dry Annealing of a PWR Nuclear Reactor Vessel Section XI, Division 1
168ASME/BPVC CASE N-520-5-20132013-01-01EnglishN-520-5 Alternative Rules for Renewal of Active or Expired N-Type Certificates for Plants Not in Active Construction Section III, Division 1
169ASME/BPVC CASE N-500-4-20132013-01-01EnglishN-500-4 Alternative Rules for Standard Supports for Classes 1, 2, 3, and MC Section III, Division 1
170ASME/BPVC CASE N-284-4-20132013-01-01EnglishN-284-4 Metal Containment Shell Buckling Design Methods, Class MC, TC, and SC Construction Section III, Divisions 1 and 3
171ASME/BPVC 2716-20132013-01-01English2716 Thermometer Range Other Than That Specified in HG-612 Section IV
172ASME/BPVC 2689-20132013-01-01English2689 Transfer of Vessel Parts From One Location to Another by Manufacturers With Multiple Locations Without Partial Data Reports Section VIII, Division 2
173ASME/BPVC 2623-20132013-01-01English2623 Alternate Weld Size for Attachment of Flat Heads Forming a Corner Joint Section IV
174ASME/BPVC 2600-20132013-01-01English2600 Use of Linear Phased Array S-Scan Ultrasonic Examination Per Article 41 Section V
175ASME/BPVC 2599-20132013-01-01English2599 Use of Linear Phased Array E-Scan Ultrasonic Examination Per Article 41 Section V
176ASME/BPVC 2558-20132013-01-01English2558 Use of Manual Phased Array E-Scan Ultrasonic Examination Per Article 4 Section V
177ASME/BPVC 2557-20132013-01-01English2557 Use of Manual Phased Array S-Scan Ultrasonic Examination Per Article 4 Section V
178ASME/BPVC 2541-20132013-01-01English2541 Use of Manual Phased Array Ultrasonic Examination Section V
179ASME/BPVC 2488-2-20132013-01-01English2488-2 UNS S31803 Plates and Seamless and Welded Pipe and Tube and Forgings and Fittings and Bar Section I
180ASME/BPVC 2235-10-20132013-01-01EnglishUse of Ultrasonic Examination in Lieu of Radiography Section I; Section VIII, Divisions 1 and 2; and Section XII
181ASME/BPVC 1876-4-20132013-01-01English1876-4 Design of Safety Valve Connections Section I
182ASME Y14.34-20132013-01-01EnglishAssociated Lists
183ASME PTC 4-20132013-01-01EnglishFired Steam Generators
184ASME B30.20-20132013-01-01EnglishBelow-the-Hook Lifting Devices - Includes Interpretations October 2010 Through May 2012
185ASME/BPVC 2616-20132013-01-01English2616 2014-T6 Aluminum Hand Forgings for Nonwelded Construction Section VIII, Division 1
186ASME/BPVC 2617-20132013-01-01English2617 18Cr-15Ni-4Mo-3Cu-N, UNS S31727, Austenitic Stainless Steel Section VIII, Division 1
187ASME/BPVC 2618-20132013-01-01English2618 Use of SB-148 C95500, As-Cast Temper, in the Manufacture of Heating Boilers, Part HF and Potable-Water Heaters, Part HLW Section IV
188ASME/BPVC 2619-20132013-01-01English2619 Use of ASTM A 414/A 414M-07 Section VIII, Division 1
189ASME/BPVC 2620-1-20132013-01-01English2620-1 Use of UNS S32101 Ferritic/Austenitic Stainless Steel Plate, Sheet, Strip, Pipe, and Tube in the Manufacture of Part HLW Water Heaters and Storage Tanks Section IV
190ASME/BPVC 2621-1-20132013-01-01English2621-1 Diffusion Bonding Section VIII, Division 1
191ASME/BPVC 2623-20132013-01-01English2623 Alternate Weld Size for Attachment of Flat Heads Forming a Corner Joint Section IV ANNULLED SUPP 2
192ASME/BPVC 2624-20132013-01-01English2624 Intermodal Transport Tanks (UN T50 Portable Tanks) Section VIII, Division 2
193ASME/BPVC 2626-20132013-01-01English2626 Minimum Thickness Requirements of Tubes in Air Cooled and Cooling Tower Heat Exchangers Section VIII, Divisions 1 and 2 ANNULLED
194ASME/BPVC 2627-20132013-01-01English2627 Use of Aluminum Alloy EN AW-6060 T1 Extruded (Integrally) Finned Tube in the Manufacture of Hot Water Heating Boilers Section IV
195ASME/BPVC 2628-20132013-01-01English2628 Use of SB-241/SB-241M Grade 6063 T1 (UNS A96063) Aluminum Alloy Extruded (Integrally) Finned and Coiled Tube in the Manufacture of Hot Water Heating Boilers Section IV
196ASME/BPVC 2629-20132013-01-01English2629 Alloy UNS N06690 Up To 1200°F (649°C) Section VIII, Division 1
197ASME/BPVC 2630-20132013-01-01English2630 Use of Fatigue Analysis Screening, Method A For Vessels Made of 1.25Cr-0.5Mo-Si and 2.25Cr-1Mo Steels Section VIII, Division 2
198ASME/BPVC 2631-20132013-01-01English2631 Titanium Aluminum Alloy, ASTM B 367-08b, Ti 3Al-2.5V or Ti 3Al-2.5V-0.05Pd Castings Section VIII, Division 1
199ASME/BPVC 2632-20132013-01-01English2632 Use of UNS N06625 Nickel Alloy (60Ni-22Cr-9Mo-3.5Cb) Annealed Grade 1 in Welded Tube, Plate, Sheet, and Strip Section I
200ASME/BPVC 2633-20132013-01-01English2633 Cast ASTM B 752-06 Zirconium Alloy Grades 702C and 705C Section VIII, Division 1
201ASME/BPVC 2634-20132013-01-01English2634 Inspection Openings in Small Pressure Vessels Section VIII, Division 1
202ASME/BPVC 2635-20132013-01-01English2635 Single Feedwater Source for Solar Fired Boiler Section I
203ASME/BPVC 2636-20132013-01-01English2636 ASTM A 240/A 240M-09a UNS S30530 Solution Annealed Austenitic Stainless Steel Plate and Sheet Section VIII, Division 1
204ASME/BPVC 2637-20132013-01-01English2637 UNS S32205 Plates, Bars, Seamless and Welded Pipe and Tube, Forgings, and Fittings Section VIII, Division 1
205ASME/BPVC 2638-20132013-01-01English2638 Alternative Piping Calibration Blocks Section V
206ASME/BPVC 2639-20132013-01-01English2639 25Cr-14Ni-Mo-Low C (UNS S30925) Seamless Austenitic Steel Tube Section I
207ASME/BPVC 2640-1-20132013-01-01English2640-1 Postponement of Mandatory Date for Compliance Section I
208ASME/BPVC 2641-20132013-01-01English2641 Titanium Nickel Molybdenum Alloy (Ti 0.8Ni-0.3Mo), Grade C-12 Castings Section VIII, Division 1
209ASME/BPVC 2642-20132013-01-01English2642 Chinese Steel Material Q345R Section VIII, Division 1
210ASME/BPVC 2643-20132013-01-01English2643 Use of UNS S32003 Ferritic/Austenitic Stainless Steel Plate, Pipe, and Tube Section IV
211ASME/BPVC 2644-20132013-01-01English2644 Punching and Shaving of Tube Holes Section IV
212ASME/BPVC 2645-20132013-01-01English2645 Use of Carbon and Low Alloy Steel Plate, AS 1548-2008 Grades PT430N/PT430NR, PT460N/PT460NR, and PT490N/PT490NR Section I and Section VIII, Division 1
213ASME/BPVC 2648-20132013-01-01English2648 62Ni-22Mo-15Cr Alloy (UNS N10362) Section VIII, Division 1
214ASME/BPVC 2649-20132013-01-01English2649 Use of Capacitive Discharge Welding for Joining NonLoad-Bearing Attachments to P-No. 15E Group No. 1 Materials Section I
215ASME/BPVC 2650-20132013-01-01English2650 Fatigue Curves for Nonwelded Parts Having UTS Less Than 90 ksi (620 MPa) Section VIII, Division 3
216ASME/BPVC 2651-1-20132013-01-01English2651-1 Rules for the Design of Electric Immersion Heater Element Support Plates Section VIII, Division 1 ANNULLED
217ASME/BPVC 2652-20132013-01-01English2652 ASTM B 167-08 UNS N06696 Nickel-Chromium-Iron-Copper Alloy Seamless Pipe and Tube Section I and Section VIII, Division 1
218ASME/BPVC 2653-20132013-01-01English2653 F-Number Grouping for 63Ni-22Mo-15Cr Alloy (UNS N10362) Filler Metal Section IX
219ASME/BPVC 2654-1-20132013-01-01English2654-1 Laser Welding of Heat Transfer Fins Section IV
220ASME/BPVC 2655-20132013-01-01English2655 Elevated Temperature Design of Bolting Section VIII, Division 2
221ASME/BPVC 2656-20132013-01-01English2656 Use of Austenitic Stainless Steel on HLW Water Heaters for Potable Water Applications Section IV
222ASME/BPVC 2657-20132013-01-01English2657 Tubes Attached by Welding Section IV
223ASME/BPVC 2658-20132013-01-01English2658 Alternative Rules for Appendix 24 When Controlled Bolting Is Used Section VIII, Division 1
224ASME/BPVC 2659-20132013-01-01English2659 Alternative Rules for Para. 4.17 When Controlled Bolting Is Used Section VIII, Division 2
225ASME/BPVC 2660-20132013-01-01English2660 F-Number Grouping for 57Ni-30Cr-9Fe-1.8Nb Filler Metal (UNS N06043) Section IX
226ASME/BPVC 2661-1-20132013-01-01English2661-1 Use of SA-723/SA-723M Forgings, SA-705/SA-705M Forgings, and SA-564/SA-564M Bar for Bolting Material and Nuts Section VIII, Division 3
227ASME/BPVC 2662-20132013-01-01English2662 Alternative Rules for Vacuum Service Vessel Construction and Certification Section VIII, Division 1 ANNULLED
228ASME/BPVC 2663-20132013-01-01English2663 Use of ASTM A 106/A 106M-08 as SA-106/SA-106M Sections I; IV; VIII, Divisions 1, 2, and 3; and XII
229ASME/BPVC 2664-20132013-01-01English2664 Heat Recovery Steam Generators With Multiple Design Conditions for Reheaters and Superheaters Section I
230ASME/BPVC 2665-1-20132013-01-01English2665-1 57Ni-22Cr-14W-2Mo-La Alloy (UNS N06230) Section I
231ASME/BPVC 2469-1-20132013-01-01English2469-1 Pneumatic Testing Section IV
232ASME/BPVC 2305-1-20132013-01-01English2305-1 Exemption From Postweld NDE Requirements of UG-93(d)(4)(-b) on Fig. UW-13.2(d) Construction Section VIII, Division 1
233ASME/BPVC 2304-2-20132013-01-01English2304-2 Austenitic Fe-35Ni-27Cr Alloy (UNS S35045) Section I and Section VIII, Division 1
234ASME/BPVC 2300-20132013-01-01English2300 Use of SA-372 Grade E Class 55, Grade J Class 55, and Grade F, G, and H Class 55 and 65 Forgings, Quenched and Tempered Section VIII, Division 1
235ASME/BPVC 2297-20132013-01-01English2297 F-Number Grouping for 9Cr-1Mo-V FCAW Consumable Section IX (Applicable to all sections, including Section III, Division I, and Section XI)
236ASME/BPVC 2296-20132013-01-01English2296 Use of Titanium-Clad Carbon Steel Plate in the As-Rolled Condition Section VIII, Divisions 1 and 2
237ASME/BPVC 2295-3-20132013-01-01English2295-3 29Cr-6.5Ni-2Mo-N Austenitic-Ferritic Stainless Steel UNS S32906 Section VIII, Divisions 1 and 2
238ASME/BPVC 2286-4-20132013-01-01English2286-4 Alternative Rules for Determining Allowable External Pressure and Compressive Stresses for Cylinders, Cones, Spheres, and Formed Heads Section VIII, Division 1
239ASME/BPVC 2277-20132013-01-01English2277 Use of 17Cr-4Ni-4Cu (UNS S17400) Section VIII, Division 2
240ASME/BPVC 2276-1-20132013-01-01English2276-1 Austenitic Ni-Cr-Mo-Nb Alloy (UNS N06626) Section VIII, Division 1
241ASME/BPVC 2270-20132013-01-01English2270 Ultrasonic Examination of Welds Made by the Electron Beam Process Section VIII, Division 1
242ASME/BPVC 2256-20132013-01-01English2256 Valve Markings Section IV
243ASME/BPVC 2254-20132013-01-01English2254 Changeover Valves Installed Between Safety Valves or Safety Relief Valves and Boilers Section I
244ASME/BPVC 2249-20132013-01-01English2249 Use of Furnace Brazing for Lethal Service Section VIII, Division 1
245ASME/BPVC 2247-20132013-01-01English2247 Alternative Pressure Test Procedure to UG-99 and UG-100 for the Construction of Multistream Aluminum Vacuum Brazed Plate-Fin Heat Exchangers Section VIII, Division 1
246ASME/BPVC 2245-2-20132013-01-01English2245-2 25Cr-7.5Ni-3.5Mo-N-Cu-W Alloy, UNS S32760 Forgings, Plate, Sheet, Strip, Bar, Seamless and Welded Pipe and Tube, and Fittings Section VIII, Division 1
247ASME/BPVC 2244-2-20132013-01-01English2244-2 UNS J93380 (CD3MWCuN) Section VIII, Division 1
248ASME/BPVC 2239-1-20132013-01-01English2239-1 Use of Permanent Mold Cast Aluminum Alloys UNS A13560 and A03570 Section VIII, Division 1
249ASME/BPVC 2235-11-20132013-01-01English2235-11 Use of Ultrasonic Examination in Lieu of Radiography Section I; Section VIII, Divisions 1 and 2; and Section XII SUPP 1
250ASME/BPVC 2230-2-20132013-01-01English2230-2 Use of Ni-Al Bronze C95820 Sand Castings for Pressure Vessels Section VIII, Division 1
251ASME/BPVC 2226-2-20132013-01-01English2226-2 Ni-Cr-Mo Alloy UNS N06022 for Code Construction for Temperatures up to 1250°F Section I
252ASME/BPVC 2224-2-20132013-01-01English2224-2 Use of 304L Stainless Steel at Elevated Temperatures Section VIII, Division 1
253ASME/BPVC 2223-3-20132013-01-01English2223-3 Use of SA-705 Type 630 Forgings (UNS S17400) and SA-693 Type 630 Plate (UNS S17400) Section VIII, Divisions 1 and 2
254ASME/BPVC 2432-1-20132013-01-01English2432-1 Use of 5052-H32, 6061-T6, and 6061-T651 Temper Aluminum Alloys in Part HF of Section IV, for Construction of Heating Boilers Sections IV and II-B
255ASME/BPVC 2437-1-20132013-01-01English2437-1 Rules for Diffusion Bonded, Flat Plate, Microchannel Heat Exchanger Section VIII, Division 1
256ASME/BPVC 2439-20132013-01-01English2439 Ni-Cr-Co-Mo Alloy (UNS N06617) Section I
257ASME/BPVC 2440-20132013-01-01English2440 Use of Mn-1/2 Mo-1/2 Ni (UNS K12039) Pipe Section I
258ASME/BPVC 2445-2-20132013-01-01English2445-2 23Cr-25Ni-5.5Mo-N, UNS S32053, Austenitic -Stainless Steel Section VIII, Division 1
259ASME/BPVC 2446-20132013-01-01English2446 Pilot-Operated Pressure Relief Valves for PG-67.2.6 Applications Section I
260ASME/BPVC 2450-20132013-01-01English2450 Use of UNS S38815 Stainless Steel to 800°F (427°C) Section VIII, Division 1
261ASME/BPVC 2451-1-20132013-01-01English2451-1 Steel Plates Produced by Thermomechanical Control Process (TMCP) Section VIII, Division 3
262ASME/BPVC 2458-3-20132013-01-01English2458-3 Austenitic Fe-27Ni-22Cr-7Mo-Mn-Cu-N Alloy (UNS S31277) Section I and Section VIII, Division 1
263ASME/BPVC 2461-1-20132013-01-01English2461-1 Use of Chromium-Silicon Alloy Steel Wire for Pressure Vessel Winding Section VIII, Division 3
264ASME/BPVC 2463-1-20132013-01-01English2463-1 Welding of Tubes to Tubesheets by Deformation Resistance Welding (DRW) Process Section VIII, Division 1
265ASME/BPVC 2468-1-20132013-01-01English2468-1 Use of Nickel-Chromium-Molybdenum-Columbium Alloy UNS N06625 Section VIII, Division 2
266ASME/BPVC 2473-20132013-01-01English2473 F-Number Grouping for Cr-Fe-Ni-Mo-Cu, Classification UNS R20033 Filler Metal Section IX
267ASME/BPVC 2475-20132013-01-01English2475 18Cr-9Ni-2.5W-V-Cb Austenitic Seamless Tube Steel Section I
268ASME/BPVC 2430-20132013-01-01English2430 Use of A 213/A 213M-04 UNS S31060 Austenitic Stainless Steel Seamless Tubing and A 240/A 240M-04aε1 UNS S31060 Austenitic Stainless Steel Plate Sections I and VIII, Division 1
269ASME/BPVC 2476-20132013-01-01English2476 Radiography Using Phosphor Imaging Plate Section V
270ASME/BPVC 2477-20132013-01-01English2477 Use of SA/BS EN 10028-3, Grade P460NL1, Fine Grain Normalized Steel Plates Section VIII, Division 2
271ASME/BPVC 2478-20132013-01-01English2478 Use of SB-247, 6061-T6 Aluminum Alloy Section VIII, Division 2
272ASME/BPVC 2481-20132013-01-01English2481 Ni-29Cr-3.5Fe-3.3Al-1.5Nb Alloy (UNS N06693) Section VIII, Division 1
273ASME/BPVC 2483-20132013-01-01English2483 Use of Aluminum Alloy EN AC-AlSi7Mg Sand Castings in F Temper Condition Meeting All Requirements of BS EN1706 1998 Section IV
274ASME/BPVC 2485-20132013-01-01English2485 Steam Drum in Heat Recovery Steam Generator System Section I
275ASME/BPVC 2488-2-20132013-01-01English2488-2 UNS S31803 Plates and Seamless and Welded Pipe and Tube and Forgings and Fittings and Bar Section I ANNULLED SUPP 2
276ASME/BPVC 2489-20132013-01-01English2489 Use of SA-508 Class 1, Grades 2 and 3 Forgings Section I
277ASME/BPVC 2493-20132013-01-01English2493 Parallel Plate Explosion Welding for Butt Joints Between Dissimilar Metals Section IX
278ASME/BPVC 2494-1-20132013-01-01English2494-1 Corrosion-Resistant Cu-Sb Carbon Steel Tube Section I
279ASME/BPVC 2496-1-20132013-01-01English2496-1 27Cr-7.6Ni-1Mo-2.3W-N UNS S32808, Solution Annealed Austenitic-Ferritic Duplex Stainless Steel Plate and Seamless Tubing and Pipe Section VIII, Divisions 1 and 2
280ASME/BPVC 2497-3-20132013-01-01English2497-3 Unalloyed and Palladium or Ruthenium Corrosion Enhanced Titanium Grades With 58 ksi Minimum UTS, UNS R50400, R52400, R52402, and R52404 Section VIII, Division 1
281ASME/BPVC 2498-20132013-01-01English2498 Use of SA/EN 10028-2, Grades P235GH and P265GH Steel Section VIII, Division 1
282ASME/BPVC 2500-20132013-01-01English2500 Use of ASTM A 576 Hot-Wrought Carbon Steel Bars for Forming Fittings for HLW Construction Section IV
283ASME/BPVC 2501-1-20132013-01-01English2501-1 Use of Aluminum Alloy 6063-0 Conforming to SB-241/ SB-241M in the Manufacture of Hot Water Boilers Under Part HF Section IV
284ASME/BPVC 2502-20132013-01-01English2502 Use of Aluminum Alloy 6063-T5 in the Manufacture of Hot Water Heating Boilers Under Part HF Section IV
285ASME/BPVC 2503-1-20132013-01-01English2503-1 Use of UNS S32003 Stainless Steel Section VIII, Division 1
286ASME/BPVC 2507-20132013-01-01English2507 Minimum Thickness of Dimpled or Embossed Assemblies Per Appendix 17 Section VIII, Division 1
287ASME/BPVC 2511-20132013-01-01English2511 Requirements for Use of an Alternative Test Method Under PG-73.4.2.2 Section I
288ASME/BPVC 2512-20132013-01-01English2512 18Cr-10Ni-3Cu-Ti-Cb Seamless Austenitic Stainless Steel Tube Section I
289ASME/BPVC 2514-1-20132013-01-01English2514-1 Use of SA-182 F22V, SA-336 F22V, SA-541 22V, SA-542 Type D, Class 4a, and SA-832 22V to 850°F (454°C) Section VIII, Division 3
290ASME/BPVC 2515-20132013-01-01English2515 Use of ASTM A 514-00a Plate Material, All Grades Section VIII, Division 3
291ASME/BPVC 2516-20132013-01-01English2516 Use of Chromium-Silicon Alloy Steel Wire ASTM A 401/A 401M UNS G92540 Section VIII, Division 3
292ASME/BPVC 2518-1-20132013-01-01English2518-1 ASTM B 407-04 UNS N06811, 42Ni-29Cr-28Fe-Mo-N, Seamless Pipes and Tubes Section I
293ASME/BPVC 2520-20132013-01-01English2520 ASTM B 444-04 UNS N06852, 50Ni-21.5Cr-17.5Fe- 9Mo-Nb, Solution Annealed Seamless Pipes and Tubes Section I
294ASME/BPVC 2523-20132013-01-01English2523 Use of Metric Units Sections I; IV; V; VIII, Divisions 1, 2, and 3; IX; X; and XII
295ASME/BPVC 2524-1-20132013-01-01English2524-1 Use of EN 10025-2:2004, Steel Name S355J2+N (Steel Number 1.0577+N) Section VIII, Division 3
296ASME/BPVC 2526-20132013-01-01English2526 Use of 49Fe-24Ni-21Cr-6Mo-Cu-N (UNS N08367) Bolting Materials for Pressure Vessels Section VIII, Division 1
297ASME/BPVC 2527-20132013-01-01English2527 Pneumatic Testing of Pressure Vessels, U-1(j), UM Vessels Section VIII, Division 1
298ASME/BPVC 2529-20132013-01-01English2529 Drain Valve on Horizontal Helical Coil Watertube Boilers Section IV
299ASME/BPVC 2530-20132013-01-01English2530 Use of Power Actuated Pressure Relief System for High Pressure Vessels Instead of Pressure Relief Valves or Rupture Disks Section VIII, Division 3
300ASME/BPVC 2532-4-20132013-01-01English2532-4 Titanium Aluminum Vanadium Iron Alloy, Grade 38 (Ti 4Al-2.5V-1.5Fe) UNS R54250 Section VIII, Division 1
301ASME/BPVC 2534-20132013-01-01English2534 Use of SA-240 (UNS S43932) in Thickness Less Than 1/4 in. Section IV
302ASME/BPVC 2537-20132013-01-01English2537 Alternative Rules for Ellipsoidal or Torispherical Heads Having Integral Backing Strip Attached to Shells Section VIII, Division 1
303ASME/BPVC 2538-20132013-01-01English2538 Minimum Thickness of Furnace Brazed Plate Heat Exchanger Heads Section VIII, Division 1
304ASME/BPVC 2541-20132013-01-01English2541 Use of Manual Phased Array Ultrasonic Examination Section V ANNULLED SUPP 1
305ASME/BPVC 2543-20132013-01-01English2543 25Cr-6Ni-Mo-N, UNS S32506, Austenitic-Ferritic Duplex Stainless Steel Section VIII, Division 1
306ASME/BPVC 2544-2-20132013-01-01English2544-2 Tolerance for Formed Heads for External Pressure Design Conditions Section VIII, Division 1
307ASME/BPVC 2545-1-20132013-01-01English2545-1 Use of SB-210 Alloys 3003-O and 6061-T6 and SB-241 Alloy 1100-O Tubes for Construction of Heating Boilers Section IV
308ASME/BPVC 2546-20132013-01-01English2546 Use of SA-240 Grade 904L (UNS N08904) Section IV
309ASME/BPVC 2547-20132013-01-01English2547 Alternatives to Flange Rigidity Requirements, Appendix 2-14 Section VIII, Division 1
310ASME/BPVC 2554-20132013-01-01English2554 Alternative Method to Area Replacement Rules for Openings Under Internal Pressure Section XII
311ASME/BPVC 2556-2-20132013-01-01English2556-2 Method for Basing Design Values on Material Properties Affirmed by Material Manufacturers Section I and Section VIII, Divisions 1, 2, and 3
312ASME/BPVC 2557-20132013-01-01English2557 Use of Manual Phased Array S-Scan Ultrasonic Examination Per Article 4 Section V ANNULLED SUPP 1
313ASME/BPVC 2558-20132013-01-01English2558 Use of Manual Phased Array E-Scan Ultrasonic Examination Per Article 4 Section V ANNULLED SUPP 1
314ASME/BPVC 2559-1-20132013-01-01English2559-1 Section VIII, Division 2 Components in Boilers Section I
315ASME/BPVC 2560-20132013-01-01English2560 Pressure Vessels With Overpressure Protection by System Design for Application to Gas Turbine Systems Section VIII, Division 1
316ASME/BPVC 2561-1-20132013-01-01English2561-1 Use of Power-Actuated Pressure-Relief System for High-Pressure Vessels Instead of Pressure-Relief Valves or Rupture Disks Section VIII, Division 3
317ASME/BPVC 2562-20132013-01-01English2562 Use of NF A 36-215,1 Grade P440 NJ4, Fine Grain Normalized Steel Plates Section VIII, Division 2
318ASME/BPVC 2563-20132013-01-01English2563 Aluminum Alloy, UNS A96061 Temper T6 and UNS A96061 Temper T651 Section VIII, Division 3
319ASME/BPVC 2564-3-20132013-01-01English2564-3 Impulsively Loaded Pressure Vessels Section VIII, Division 3
320ASME/BPVC 2565-20132013-01-01English2565 Mounting Safety and Safety Relief Valves for Coil Type Heating Boilers Section IV
321ASME/BPVC 2567-20132013-01-01English2567 SA-705, Type XM-12, Conditions H1075, H1025, H925, and H900 Forging Materials Section VIII, Division 3
322ASME/BPVC 2568-20132013-01-01English2568 HG-701.1 Permissible Mounting Safety Relief Valves for Coil-Type Boilers Section IV
323ASME/BPVC 2570-20132013-01-01English2570 Copper Alloys Section IV
324ASME/BPVC 2571-1-20132013-01-01English2571-1 Use of SA-240, Grades 304L and 316L in Thickness Less Than 1/4 in. (6 mm) Section IV
325ASME/BPVC 2573-20132013-01-01English2573 Use of Aluminum Alloy 6063-T6 Conforming to SB-221 in the Manufacture of Heating Boilers Under Part HF Section IV
326ASME/BPVC 2576-20132013-01-01English2576 Use of ASTM A 672-06 and A 691-98(R2002) Electric-Fusion-Welded Pipe Section I
327ASME/BPVC 2577-20132013-01-01English2577 Use of 316L Stainless Steel at Elevated Temperatures Section VIII, Division 1
328ASME/BPVC 2579-3-20132013-01-01English2579-3 Composite Reinforced Pressure Vessels for Gaseous H2 Service Section VIII, Division 3
329ASME/BPVC 2581-20132013-01-01English2581 20Cr-25Ni-1.5Mo-Cb-N Seamless Austenitic Stainless Steel Tube Section I
330ASME/BPVC 2582-1-20132013-01-01English2582-1 UNS S31803 Plate and Seamless and Welded Pipe and Tube Section IV
331ASME/BPVC 2583-20132013-01-01English2583 Alternative Relief-Valve Sizing Section IV
332ASME/BPVC 2585-1-20132013-01-01English2585-1 23Cr-35Ni-7.5Mo-N, UNS N08354, Austenitic Alloy Section VIII, Division 1
333ASME/BPVC 2586-1-20132013-01-01English2586-1 25Cr-7.5Ni-4.5Mo-Co-N Austenitic-Ferritic Stainless Steel UNS S32707 Section VIII, Division 1
334ASME/BPVC 2587-20132013-01-01English2587 Alternative Rules for Designing U-Shaped Bellows Section VIII, Division 1
335ASME/BPVC 2588-20132013-01-01English2588 Ni-Cr-Mo Bolting Material UNS N06059, ASTM F 468-06 Section VIII, Division 1
336ASME/BPVC 2590-3-20132013-01-01English2590-3 Use of Noncertificate Holders for Welding and Brazing Section VIII, Divisions 1 and 2
337ASME/BPVC 2591-20132013-01-01English2591 25Cr-20Ni Austenitic Stainless Steel UNS S31002 Section VIII, Division 1
338ASME/BPVC 2592-1-20132013-01-01English2592-1 Use of Welds That Are Not Ground or Machined Section VIII, Division 3
339ASME/BPVC 2593-1-20132013-01-01English2593-1 Use of Friction Stir Welding (FSW) for 5052 Aluminum Alloy Bellows Expansion Joints for Pressure Vessels Section VIII, Division 1
340ASME/BPVC 2594-1-20132013-01-01English2594-1 Use of SA/EN 10028-3, Grade P460NL1, Fine Grain Normalized Steel Plates Section VIII, Division 2
341ASME/BPVC 2595-20132013-01-01English2595 Use of Materials in a Current Code Edition for a Boiler Constructed to an Earlier Code Edition Section I
342ASME/BPVC 2596-1-20132013-01-01English2596-1 Cold-Stretching of Austenitic Stainless Steel Pressure Vessels Section VIII, Division 1
343ASME/BPVC 2597-20132013-01-01English2597 Permit Testing a Single Forging to Represent Several Thicknesses Section VIII, Division 3
344ASME/BPVC 2598-20132013-01-01English2598 22Cr-15Ni-Cb-N Austenitic Stainless Steel Seamless Tubing Section I
345ASME/BPVC 2599-20132013-01-01English2599 Use of Linear Phased Array E-Scan Ultrasonic Examination Per Article 41 Section V ANNULLED SUPP 1
346ASME/BPVC 2600-20132013-01-01English2600 Use of Linear Phased Array S-Scan Ultrasonic Examination Per Article 41 Section V ANNULLED SUPP 1
347ASME/BPVC 2601-20132013-01-01English2601 Recertification of Materials for Construction Section VIII, Division 3
348ASME/BPVC 2602-1-20132013-01-01English2602-1 Dry Film Storage of Digital Radiographic Images Section V
349ASME/BPVC 2603-1-20132013-01-01English2603-1 Use of UNS S32101 Ferritic/Austenitic Stainless Steel Plate, Sheet, Strip, Pipe, and Tube Section IV
350ASME/BPVC 2604-20132013-01-01English2604 Use of Pneumatic Testing on Individual Cast Aluminum Sections Section IV
351ASME/BPVC 2605-1-20132013-01-01English2605-1 Fatigue Evaluation for SA-182 F22V, SA-336 F22V, SA-541 22V, SA-542 Type D, Class 4a, and SA-832 Grade 22V at Temperatures Greater Than 371°C (700°F) and Less Than or Equal to 454°C (850°F) Section VIII, Division 2
352ASME/BPVC 2606-20132013-01-01English2606 Use of SA-350, Grade LF2, Class 1 Steel Forgings Section I
353ASME/BPVC 2607-20132013-01-01English2607 Use of SA-420, Grade WPL6 and Welded Steel Fittings Section I
354ASME/BPVC 2608-20132013-01-01English2608 Testing of Vessels Containing an Internal Piston Section VIII, Division 1
355ASME/BPVC 2609-20132013-01-01English2609 Use of Chromium-Silicon Alloy Steel Wire ASTM A 401/A 401M-03 UNS G92540 Section VIII, Division 3
356ASME/BPVC 2610-20132013-01-01English2610 SA-453, Grade 660, Class C, High Temperature Bolting Materials With Expansion Coefficients Comparable to Austenitic Steels Section VIII, Divisions 1 and 2
357ASME/BPVC 2611-20132013-01-01English2611 Use of SA/EN 10028-3, Grade P355N, Fine Grain Normalized Steel Plates Section VIII, Division 2
358ASME/BPVC 2613-20132013-01-01English2613 Phenolic Lining Material in HLW-200 Application Section IV
359ASME/BPVC 2614-20132013-01-01English2614 Alternative Lining Material in HLW-200 Application Section IV
360ASME/BPVC 2615-20132013-01-01English2615 Use of Sheet or Plate Material With Revised Minimum Thickness for HLW Water Heater and Storage Tank Construction Section IV
361ASME/BPVC CASE N-597-2-20132013-01-01EnglishN-597-2 Requirements for Analytical Evaluation of Pipe Wall Thinning Section XI, Division 1
362ASME/BPVC 2222-2-20132013-01-01English2222-2 Precipitation-Hardening Nickel Alloy (UNS N07718) Used as Pressure Retaining Component Material Section VIII, Divisions 1 and 2
363ASME/BPVC 2217-5-20132013-01-01English2217-5 Precipitation-Hardening Ni-Cr-Mo Alloy (UNS N07725) Section VIII, Divisions 1, 2, and 3
364ASME/BPVC 2205-20132013-01-01English2205 Alternate Rules for Heat Treatment of Repair Welds to Castings Section VIII, Division 1
365ASME/BPVC 2203-1-20132013-01-01English2203-1 Omission of Lifting Device Requirements for Pressure Relief Valves on Air, Water Over 140°F, or Steam Service Section VIII, Divisions 1 and 2
366ASME/BPVC 2199-6-20132013-01-01English2199-6 2.25Cr-1.6W-V-Cb Material Section I
367ASME/BPVC 2197-1-20132013-01-01English2197-1 18.5Cr-15.5Ni-4.5Mo-N Alloy (UNS S31726) Austenitic Stainless Steel Section VIII, Division 1
368ASME/BPVC 2196-2-20132013-01-01English2196-2 Austenitic Stainless Steel Seamless Tubes and Pipe, Seamless Wrought Fittings, Plate, and Sheet, 18Cr-11NiCb-N, UNS S34751, 347LN Section VIII, Division 1
369ASME/BPVC 2195-1-20132013-01-01English2195-1 24.5Cr-22Ni-7.5Mo-3Mn-N Austenitic Stainless Steel (UNS S32654) Section VIII, Division 1
370ASME/BPVC 2192-8-20132013-01-01English2192-8 Modified 9Cr-1Mo-V Cast Material Section I
371ASME/BPVC 2179-8-20132013-01-01English2179-8 9Cr-2W, UNS K92460 Material Section I and Section VIII, Division 1
372ASME/BPVC 2172-20132013-01-01English2172 Use of B 43 Seamless Red Brass Pipe (UNS C23000) With Drawn General Purpose Temper (H58) for Threaded Piping for Construction of PMB and PEB Miniature Electric Boilers Section I
373ASME/BPVC 2155-20132013-01-01English2155 Use of Rod and Bar for Heads Section VIII, Division 1
374ASME STP-NU-051-1-20122012-12-31EnglishCODE COMPARISON REPORT for Class 1 Nuclear Power Plant Components
375ASME STP-PT-054-20122012-12-21EnglishConcentrated Solar Power (CSP) Codes and Standards Gap Analysis
376ASME STP-SA-055-20122012-12-21EnglishGUIDE TO MOBILE CRANE STANDARDS
377ASME B30.16-20122012-12-07EnglishOverhead Hoists (Underhung)
378ASME/BPVC SEC IX ERRATA-20122012-12-05EnglishERRATA for SECTION IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS WELDING AND BRAZING QUALIFICATIONS - INCLUDES ERRATA: 11-729; 11-1697; 11-130; 11-2201; 12-404; 12-1305; 12-1506;
379ASME/BPVC SEC II-C ERRATA-20122012-12-04EnglishERRATA for SECTION II-C SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS - MATERIALS - INCLUDES ERRATA: 11-729; 11-1697; 11-130; 11-2201; 12-404; 12-1506
380ASME/BPVC SEC VIII-2 ERRATA-20122012-11-28EnglishERRATA for SECTION VIII DIVISION 2 ALTERNATIVE RULES RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-470; 11-1274; 11-1677; 11-1680; 11-2242; 12-694; 12-1286; 12-1736
381ASME/BPVC SEC VIII-3 ERRATA-20122012-11-28EnglishERRATA for SECTION VIII DIVISION 3 ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-589; 11-1274; 11-1678; 11-2242; 12-694; 12-1286; 12-1736
382ASME/BPVC SEC VIII-1 ERRATA-20122012-11-28EnglishERRATA for SECTION VIII DIVISION 1 RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-733; 11-1274; 11-1676; 11-1680; 11-2242; 12-694; 12-1286; 12-1736
383ASME HST-1-20122012-11-28EnglishPerformance Standard for Electric Chain Hoists
384ASME B16.22-20122012-11-27EnglishWrought Copper and Copper Alloy Solder-Joint Pressure Fittings
385"cart">ASME/BPVC SEC III-1 NH ERRATA-20122012-11-26EnglishERRATA for SECTION III DIVISION 1 - SUBSECTION NH CLASS 1 COMPONENTS IN ELEVATED TEMPERATURE SERVICE RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-870; 11-1266; 11-684; 12-1938
386ASME STP-NU-035-20122012-11-20EnglishEXTEND ALLOWABLE STRESS VALUES FOR ALLOY 800H
387ASME B16.44-20122012-11-19EnglishManually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up to 5 psi
388ASME B20.1 INTERPRETATIONS-20122012-11-14EnglishInterpretations to B20.1 - Safety Standard for Conveyors and Related Equipment - Includes Interpretations: 11 through 24
389ASME B31.4-20122012-11-12EnglishPipeline Transportation Systems for Liquids and Slurries - Includes Interpretations through May 15, 2012
390ASME/BPVC SEC III-2 ERRATA-20122012-11-08EnglishERRATA for SECTION III DIVISION 2 CODE FOR CONCRETE CONTAINMENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 04-427; 09-1896; 10-634; 12-1797
391ASME/BPVC SEC III NCA ERRATA-20122012-11-08EnglishERRATA for SECTION III SUBSECTION NCA GENERAL REQUIREMENTS FOR DIVISION 1 AND DIVISION 2 RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-1351; 12-857; 12-1797
392ASME B31G-20122012-10-24EnglishManual for Determining the Remaining Strength of Corroded Pipelines
393ASME A17.2-20122012-10-22EnglishGuide for Inspection of Elevators, Escalators, and Moving Walks Includes Inspection Procedures for Electric Traction and Winding Drum Elevators, Hydraulic Elevators, Inclined Elevators, Private Residence Elevators, and Escalators and Moving Walks
394ASME STP-NU-040-20122012-10-19EnglishUPDATE AND IMPROVE SUBSECTION NH – SIMPLIFIED ELASTIC AND INELASTIC DESIGN ANALYSIS METHODS
395ASME NQA-1 INTERPRETATIONS-20122012-10-03EnglishInterpretations to NQA-1 Quality Assurance Requirements for Nuclear Facility Applications - Includes Interpretations 1991 through 2012
396ASME BPE-20122012-09-28EnglishBioprocessing Equipment
397ASME STP-PT-049-20122012-09-28EnglishINVESTIGATION OF TEMPERATURE DERATING FACTORS FOR HIGH-STRENGTH LINE PIPE
398ASME B16.29-20122012-09-26EnglishWrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings - DWV
399ASME B16.38-20122012-09-21EnglishLarge Metallic Valves for Gas Distribution Manually Operated, NPS 2 1/2 (DN 65) to NPS 12 (DN 300), 125 psig (8.6 bar) Maximum
400ASME B16.33-20122012-09-21EnglishManually Operated Metallic Gas Valves for Use in Gas Piping Systems Up to 175 psi (Sizes NPS ½ Through NPS 2)
401ASME/BPVC SEC I ERRATA-20122012-09-17EnglishERRATA for SECTION I RULES FOR CONSTRUCTION OF POWER BOILERS - INCLUDES ERRATA: 11-425; 11-1457; 11-1757; 11-1978; 12-624; 12-473; 12-1193; 12-1049
402"cart">ASME/BPVC SEC III-1 NF ERRATA-20122012-08-31EnglishERRATA for SECTION III DIVISION 1 - SUBSECTION NF SUPPORTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-1436; 10-870; 12-1312; 12-1575
403ASME/BPVC BPVC-CC-BPV ERRATA-20122012-08-23EnglishBPVC CODE CASES: BOILERS AND PRESSURE VESSELS - Includes Erratas 12-1304
404ASME B18.5-20122012-08-13EnglishRound Head Bolts (Inch Series)
405ASME/BPVC SEC III-1 NH ERRATA-20122012-08-12EnglishERRATA for SECTION III DIVISION 1 - SUBSECTION NH CLASS 1 COMPONENTS IN ELEVATED TEMPERATURE SERVICE RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-870; ERRATA 11-1266; ERRATA 11-684
406ASME/BPVC SEC III-1 NB ERRATA-20122012-07-31EnglishERRATA for SECTION III DIVISION 1 - SUBSECTION NB CLASS 1 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-2129; 12-1313
407ASME/BPVC SEC III-1 NC ERRATA-20122012-07-31EnglishERRATA for SECTION III DIVISION 1 - SUBSECTION NC CLASS 2 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-870; 12-1310; 12-1313
408ASME/BPVC SEC III-1 ND ERRATA-20122012-07-31EnglishERRATA FOR SECTION III DIVISION 1 - SUBSECTION ND CLASS 3 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 12-1313
409ASME/BPVC SEC III-5 ERRATA-20122012-07-31EnglishSECTION III DIVISION 5 HIGH TEMPERATURE REACTORS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATAS: 12-1309
410ASME B18.9-20122012-07-25EnglishPlow Bolts
411ASME STP-PT-048-20122012-06-30EnglishCRITERIA FOR RELIABILITY -BASED DESIGN AND ASSESSMENT FOR ASME B31.8 CODE
412ASME STP-NU-045-1-20122012-06-30EnglishROADMAP TO DEVELOP ASME CODE RULES FOR THE CONSTRUCTION OF HIGH TEMPERATURE GASCOOLED REACTORS (HTGRS)
413ASME B31.1-20122012-06-29EnglishPower Piping - Includes Interpretations No. 2 through 6, 8 through 10, 13, 15, 17 through 25, 27 through 31, and 42 through 46
414ASME STP-PT-050-20122012-06-15EnglishAN INVESTIGATION OF THREE RADIOGRAPHIC ACCESS PORT PLUG GEOMETRIES AND THE SURROUNDING PIPE WALL UNDERGOING CREEP
415ASME Y14.37-20122012-06-15EnglishComposite Part Drawings
416ASME STP-PT-052-20122012-06-15EnglishALIGN MECHANICAL AND CIVIL-STRUCTURAL EARTHQUAKE DESIGN AND QUALIFICATION RULES FOR ASME B31 PIPING SYSTEMS AND PIPELINES
417ASME NUCLEAR-20122012-06-14EnglishForging a New Nuclear Safety Construct
418ASME A17.1 INTERPRETATIONS-20122012-06-01EnglishInterpretations to A17.1 Safety Code for Elevators and Escalators - Includes Interpretations No. 1 Through 23 and 25 Through 32
419ASME B20.1-20122012-05-15EnglishSafety Standard for Conveyors and Related Equipment
DoD Adopted | ANSI Approved
420ASME B31.4 INTERPRETATIONS-20122012-05-15EnglishIntrepretations to B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids - Includes Interpretations through No. 9
421ASME Y14.41-20122012-05-14EnglishDigital Product Definition Data Practices
422ASME CSD-1-20122012-05-10EnglishControls and Safety Devices for Automatically Fired Boilers - Includes Interpretations Thru Volume 15: December 2011
DoD Adopted | ANSI Approved
423ASME B30.20 INTERPRETATIONS-20122012-05-01EnglishInterpretations to B30.20 - Below-The-Hook Lifting Devices - Includes Interpretations Through May 2012
424ASME/BPVC SEC VIII-3 ERRATA-20122012-04-23EnglishERRATA for SECTION VIII DIVISION 3 ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-589; 11-1274; 11-1678; 11-2242
ANSI Approved
425ASME/BPVC SEC VIII-2 ERRATA-20122012-04-23EnglishERRATA for SECTION VIII DIVISION 2 ALTERNATIVE RULES RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-470; 11-1274; 11-1677; 11-1680; 11-2242
ANSI Approved
426ASME/BPVC SEC VIII-1 ERRATA-20122012-04-23EnglishERRATA for SECTION VIII DIVISION 1 RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-733; 11-1274; 11-1676; 11-1680; 11-2242
ANSI Approved
427ASME OM CODE INTERPRETATIONS-20122012-04-18EnglishInterpretations to OM CODE Code for Operation and Maintenance of Nuclear Power Plants - Includes Interpretations Dated September 1, 1995 thru April 18, 2012
428ASME V&V 10.1-20122012-04-16EnglishAn Illustration of the Concepts of Verification and Validation in Computational Solid Mechanics
ANSI Approved
429ASME A112.19.15-20122012-04-11EnglishBathtubs/Whirlpool Bathtubs with Pressure Sealed Doors
430ASME TDP-2-20122012-04-10EnglishPrevention of Water Damage to Steam Turbines Used for Electric Power Generation: Nuclear-Fueled Plants
431ASME TDP-2-20122012-04-10EnglishPrevention of Water Damage to Steam Turbines Used for Electric Power Generation: Nuclear-Fueled Plants
432ASME A112.1.2-20122012-04-09EnglishAir Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors)
433ASME B18.2.6M-20122012-03-23EnglishMetric Fasteners for Use in Structural Applications
434ASME STP-TS-012-1-20122012-03-05EnglishTHERMOPHYSICAL PROPERTIES OF WORKING GASES USED IN WORKING GAS TURBINE APPLICATIONS
435ASME PTC 19.3 ERTA-20122012-03-01EnglishPart 3: Temperature Measurement Instruments and Apparatus
436ASME/BPVC SEC IX ERRATA-20122012-03-01EnglishERRATA for SECTION IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS WELDING AND BRAZING QUALIFICATIONS - INCLUDES ERRATA: 11-729; 11-1697; 11-130 and 11-2201
ANSI A
437ASME/BPVC SEC II-C ERRATA-20122012-03-01EnglishERRATA for SECTION II-C SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS - MATERIALS - INCLUDES ERRATA: 11-729; 11-1697; 11-130 and 11-2201
ANSI Approved
438ASME B31.8 INTERPRETATIONS-20122012-03-01EnglishCode for Pressure Piping - Includes Interpretations 1-16: September 1981 Through March 2012
439"cart">ASME/BPVC SEC IV ERRATA-20122012-02-16EnglishERRATA FOR SECTION IV RULES FOR CONSTRUCTION OF HEATING BOILERS - INCLUDES ERRATA: 11-800
440ASME B18.2.1-20122012-01-01EnglishSquare, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)
441ASME QME-1-20122012-01-01EnglishQualification of Active Mechanical Equipment Used in Nuclear Facilities
442ASME A112.18.1-20122012-01-01EnglishPlumbing supply fittings
443ASME B16.20-20122012-01-01EnglishMetallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed
444ASME B16.25-20122012-01-01EnglishButtwelding Ends
445ASME B30.29-20122012-01-01EnglishSelf-Erecting Tower Cranes Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
446ASME PVHO-2-20122012-01-01EnglishSafety Standard for Pressure Vessels for Human Occupancy In-Service Guidelines
447ASME Y14.24-20122012-01-01EnglishTypes and Applications of Engineering Drawings
448ASME AG-1-20122012-01-01EnglishCode on Nuclear Air and Gas Treatment
449ASME B31.8-20122012-01-01EnglishGas Transmission and Distribution Piping Systems - Includes Interpretations VOLUME 16
450ASME B107.110-20122012-01-01EnglishSocket Wrenches, Handles, and Attachments
451ASME B73.1-20122012-01-01EnglishSpecification for Horizontal End Suction Centrifugal Pumps for Chemical Process
452ASME B31.8S-20122012-01-01EnglishManaging System Integrity of Gas Pipelines - Supplement to ASME B31.8
453ASME B31.3-20122012-01-01EnglishProcess Piping - Includes Interpretation 23
454ASME B30.16 INTERPRETATIONS-20122012-01-01EnglishInterpretations to B30.16 - Overhead Hoists (Underhung) - Includes Interpretations through January 2012
455ASME B30.3-20122012-01-01EnglishTower Cranes
456ASME COMPANION GUIDE V2-20122012-01-01EnglishCompanion Guide to the ASME Boiler and Pressure Vessel and Piping Codes - Volume 2 - Fourth Edition
457ASME COMPANION GUIDE V1-20122012-01-01EnglishCompanion Guide to the ASME Boiler and Pressure Vessel and Piping Codes - Volume 1 - Fourth Edition
458ASME Y14.3-20122012-01-01EnglishOrthographic and Pictorial Views
459ASME Y14.1M-20122012-01-01EnglishMetric Drawing Sheet Size and Format
460ASME Y14.1-20122012-01-01EnglishDecimal Inch Drawing Sheet Size and Format
461ASME NQA-1-20122012-01-01EnglishQuality Assurance Requirements for Nuclear Facility Applications - Includes Interpretations December 2010 through October 2012
462ASME OM-20122012-01-01EnglishOperation and Maintenance of Nuclear Power Plants
463ASME OM CODE CASES-20122012-01-01EnglishCode Cases to OM CODE Code for Operation and Maintenance of Nuclear Power Plants
464ASME B16.49-20122012-01-01EnglishFactory-Made, Wrought Steel, Buttwelding Induction Bends for Transportation and Distribution Systems
465ASME B18.2.1-20122012-01-01EnglishSquare, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) - Includes Errata July 2013
466ASME B18.3-20122012-01-01EnglishSocket Cap, Shoulder, Set Screws, and Hex Keys (Inch Series)
467ASME A112.19.7-20122012-01-01EnglishHydromassage bathtub systems
468ASME B16.9-20122012-01-01EnglishFactory-Made Wrought Buttwelding Fittings
469ASME B5.57-20122012-01-01EnglishMethods for Performance Evaluation of Computer Numerically Controlled Lathes and Turning Centers
470ASME B31.1 INTERPRETATIONS-20112011-12-31EnglishInterpretations to B31.1 Power Piping - Includes Interpretations No. 2 through 6, 8 through 10, 13, 15, 17 through 25, 27 through 31, and 42 through 46
471ASME STP-PT-034-20112011-12-22EnglishASME CODE DEVELOPMENT ROADMAPFOR HOPE PIPE IN NUCLEAR SERVICE
472ASME STP-NU-044-20112011-12-15EnglishNON DESTRUCTIVE EXAMINATION (NDE) AND IN-SERVICE INSPECTION (ISI) TECHNOLOGY FOR HIGH TEMPERATURE REACTORS
473ASME/BPVC SEC I ERRATA-20112011-12-13EnglishERRATA for SECTION I RULES FOR CONSTRUCTION OF POWER BOILERS - INCLUDES ERRATA: 11-425; 11-1457; 11-1757
ANSI Approved
474ASME B18.31.5-20112011-12-12EnglishBent Bolts (Inch Series)
475ASME/BPVC SEC II-C ERRATA-20112011-12-08EnglishERRATA for SECTION II-C SPECIFICATIONS FOR WELDING RODS, ELECTRODES, AND FILLER METALS - MATERIALS - INCLUDES ERRATA: 11-729; 11-1697
ANSI Approved
476ASME/BPVC SEC IX ERRATA-20112011-12-08EnglishERRATA for SECTION IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS WELDING AND BRAZING QUALIFICATIONS - INCLUDES ERRATA: 11-729; 11-1697
ANSI Approved
477ASME/BPVC SEC III-1 NB ERRATA-20112011-12-05EnglishERRATA for SECTION III DIVISION 1 - SUBSECTION NB CLASS 1 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-2129
ANSI Approved
478ASME/BPVC SEC III-1 NE ERRATA-20112011-12-05EnglishERRATA for SECTION III DIVISION 1 - SUBSECTION NE CLASS MC COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-2129
ANSI Approved
479ASME/BPVC SEC III-1 APPENDICES ERRATA-20112011-12-05EnglishERRATA for SECTION III DIVISION 1 - APPENDICES RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-1436; 11-2129
ANSI Approved
480ASME/BPVC CC-NC ERRATA-20112011-12-05EnglishERRATA for CODE CASES: NUCLEAR COMPONENTS - INCLUDES ERRATA: 11-1368; 11-1996; 11-2129
481ASME CSD-1 INTERPRETATIONS-20112011-12-01EnglishInterpretations to CSD-1 Controls and Safety Devices for Automatically Fired Boilers - Includes Interpretations Through Volume 15
DoD Adopted | ANSI Approved
482ASME B16.42-20112011-11-28EnglishDuctile Iron Pipe Flanges and Flanged Fittings Classes 150 and 300
483ASME/BPVC SEC XII ERRATA-20112011-11-17EnglishERRATA for SECTION XII RULES FOR CONSTRUCTION AND CONTINUED SERVICE OF TRANSPORT TANKS - INCLUDES ERRATA: 11-1581; 11-1706
ANSI Approved
484ASME B16.24-20112011-11-14EnglishCast Copper Alloy Pipe Flanges and Flanged Fittings Classes 150, 300, 600, 900, 1500, and 2500
DoD Adopted | ANSI Approved
485ASME/BPVC SEC XI ERRATA-20112011-11-10EnglishERRATA for SECTION XI RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS - INCLUDES ERRATA: 11-1368; 11-1996
ANSI Approved
486ASME/BPVC SEC III-5-20112011-11-01EnglishSECTION III DIVISION 5 HIGH TEMPERATURE REACTORS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS
ANSI Approved
487ASME A18.1-20112011-10-31EnglishSafety Standard for Platform Lifts and Stairway Chairlifts
ANSI Approved
488ASME B18.13.1M-20112011-10-21EnglishScrew and Washer Assemblies: SEMS (Metric Series)
DoD Adopted | ANSI Approved
489ASME PTC 6.2-20112011-10-21EnglishSteam Turbines in Combined Cycles
ANSI Approved
490ASME B16.47-20112011-10-20EnglishLarge Diameter Steel Flanges NPS 26 Through NPS 60 Metric/Inch Standard
ANSI Approved
491ASME B16.3-20112011-10-10EnglishMalleable Iron Threaded Fittings Classes 150 and 300
DoD Adopted | ANSI Approved
492ASME B16.26-20112011-10-07EnglishCast Copper Alloy Fittings for Flared Copper Tubes
DoD Adopted | ANSI Approved
493ASME B30.23-20112011-10-06EnglishPersonnel Lifting Systems Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
ANSI Approved
494ASME/BPVC SEC VIII-2 ERRATA-20112011-10-05EnglishERRATA for SECTION VIII DIVISION 2 ALTERNATIVE RULES RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-470; 11-1274
ANSI Approved
495ASME/BPVC SEC VIII-1 ERRATA-20112011-10-05EnglishERRATA for SECTION VIII DIVISION 1 RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-733; 11-1274
ANSI Approved
496ASME QEI-1 INTERPRETATIONS-20112011-10-01EnglishInterpretations to ASME QEI-1 - Qualification of Elevator Inspectors - Includes Interpretations March 1984 Through October 2011
497ASME A112.18.9-20112011-09-30EnglishProtectors/Insulators for Exposed Waste and Supplies on Accessible Fixtures
498ASME B31.3 INTERPRETATIONS-20112011-09-27EnglishINTERPRETATIONS to B31.3 - 2010 Process Piping - Includes Interpretations No. 1 Through 23
499ASME B16.4-20112011-09-15EnglishGray Iron Threaded Fittings Classes 125 and 250
DoD Adopted | ANSI Approved
500ASME B16.15-20112011-09-15EnglishCast Copper Alloy Threaded Fittings Classes 125 and 250 - Includes Interpretations thru June 1: 2011
DoD Adopted | ANSI Approved