Pos | standard Number | publication date | Language | Description |
1 | ASME/BPVC CASE N-700-2015 | 2015-07-01 | English | N-700 Alternative Rules for Selection of Classes 1, 2, and 3 Vessel Welded Attachments for Examination Section XI, Division 1 |
2 | ASME/BPVC CASE N-695-1-2015 | 2015-07-01 | English | N-695-1 Qualification Requirements for Dissimilar Metal Piping Welds Section XI, Division 1 |
3 | ASME/BPVC CASE N-697-2015 | 2015-07-01 | English | N-697 Pressurized Water Reactor (PWR) Examination and Alternative Examination Requirements for Pressure Retaining Welds in Control Rod Drive and Instrument Nozzle Housings Section XI, Division 1 |
4 | ASME/BPVC CASE N-698-2015 | 2015-07-01 | English | N-698 Design Stress Intensities and Yield Strength Values for UNS N06690 With a Minimum Specified Yield Strength of 35 ksi (240 MPa), Class 1 Components Section III, Division 1 |
5 | ASME/BPVC CASE N-658-2015 | 2015-07-01 | English | N-658 Qualification Requirements for Ultrasonic Examination of Wrought Austenitic Piping Welds Section XI, Division 1 |
6 | ASME/BPVC CASE N-660-2015 | 2015-07-01 | English | N-660 Risk-Informed Safety Classification for Use in Risk-Informed Repair/Replacement Activities Section XI, Division 1 |
7 | ASME/BPVC CASE N-662-1-2015 | 2015-07-01 | English | N-662-1 Alternative Repair/Replacement Requirements for Items Classified in Accordance With Risk-Informed Processes Section XI, Division 1 |
8 | ASME/BPVC CASE N-657-2015 | 2015-07-01 | English | N-657 Use of the N-1A Data Report Form for Spent Fuel Canisters Section III, Division 1 ANNULLED |
9 | ASME/BPVC CASE N-666-1-2015 | 2015-07-01 | English | N-666-1 Weld Overlay of Class 1, 2, and 3 Socket Welded Connections Section XI, Division 1 |
10 | ASME/BPVC CASE N-663-2015 | 2015-07-01 | English | N-663 Alternative Requirements for Classes 1 and 2 Surface Examinations Section XI, Division 1 |
11 | ASME/BPVC CASE N-664-2015 | 2015-07-01 | English | N-664 Performance Demonstration Requirements for Examination of Unclad Reactor Pressure Vessel Welds, Excluding Flange Welds Section XI, Division 1 |
12 | ASME/BPVC CASE N-665-2015 | 2015-07-01 | English | N-665 Alternative Requirements for Beam Angle Measurements Using Refracted Longitudinal Wave Search Units Section XI, Division 1 |
13 | ASME/BPVC CASE N-655-2-2015 | 2015-07-01 | English | N-655-2 Use of SA-738, Grade B, for Metal Containment Vessels, Class MC Section III, Division 1 |
14 | ASME/BPVC CASE N-654-2015 | 2015-07-01 | English | N-654 Acceptance Criteria for Flaws in Ferritic Steel Components 4 in. and Greater in Thickness Section XI, Division 1 |
15 | ASME/BPVC CASE N-652-2-2015 | 2015-07-01 | English | N-652-2 Alternative Requirements to Categories B-G-1, B-G-2, and C-D Bolting Examination Methods and Selection Criteria Section XI, Division 1 |
16 | ASME/BPVC CASE N-673-2015 | 2015-07-01 | English | N-673 Boron Containing Powder Metallurgy Aluminum Alloy for Storage and Transportation of Spent Nuclear Fuel Section III, Division 1 |
17 | ASME/BPVC CASE N-659-2-2015 | 2015-07-01 | English | N-659-2 Use of Ultrasonic Examination in Lieu of Radiography for Weld Examination Section III, Division 1; Section III, Division 3 |
18 | ASME/BPVC CASE N-651-2015 | 2015-07-01 | English | N-651 Ferritic and Dissimilar Metal Welding Using SMAW Temper Bead Technique Without Removing the Weld Bead Crown for the First Layer Section XI, Division 1 |
19 | ASME/BPVC CASE N-650-2015 | 2015-07-01 | English | N-650 Use of SA-537, Class 2 Plate Material in Non-pressure Boundary Application Service 700°F to 850°F, Class 1 or CS Section III, Division 1 |
20 | ASME/BPVC CASE N-691-2015 | 2015-07-01 | English | N-691 Application of Risk-Informed Insights to Increase the Inspection Interval for Pressurized Water Reactor Vessels Section XI, Division 1 |
21 | ASME/BPVC CASE N-686-1-2015 | 2015-07-01 | English | N-686-1 Alternative Requirements for Visual Examinations, VT-1, VT-2, and VT-3 Section XI, Division 1 |
22 | ASME/BPVC CASE N-685-2015 | 2015-07-01 | English | N-685 Lighting Requirements for Surface Examination Section XI, Division 1 |
23 | ASME/BPVC CASE N-683-2015 | 2015-07-01 | English | N-683 Method for Determining Maximum Allowable False Calls When Performing Single-Sided Access Performance Demonstration in Accordance With, Appendix VIII, Supplements 4 and 6 Section XI, Division 1 |
24 | ASME/BPVC CASE N-699-2015 | 2015-07-01 | English | N-699 Use of Titanium Grade 2 (UNS R50400) Tube and Bar, and Grade 1 (UNS R50250) Plate and Sheet for Class 1 Construction Section III, Division 1 |
25 | ASME/BPVC CASE N-694-2-2015 | 2015-07-01 | English | N-694-2 Evaluation Procedure and Acceptance Criteria for PWR Reactor Vessel Head Penetration Nozzles Section XI, Division 1 |
26 | ASME/BPVC CASE N-645-1-2015 | 2015-07-01 | English | N-645-1 Use of Rupture Disk Devices on Nuclear Fuel Storage Cannisters, Class 1 Section III, Division 1 ANNULLED |
27 | ASME/BPVC CASE N-648-2-2015 | 2015-07-01 | English | N-648-2 Alternative Requirements for Inner Radius Examinations of Class 1 Reactor Vessel Nozzles Section XI, Division 1 |
28 | ASME/BPVC CASE N-646-2015 | 2015-07-01 | English | N-646 Alternative Stress Intensification Factors for Circumferential Fillet Welded or Socket Welded Joints for Class 2 or 3 Piping Section III, Division 1 ANNULLED |
29 | ASME/BPVC CASE N-643-2-2015 | 2015-07-01 | English | N-643-2 Fatigue Crack Growth Rate Curves for Ferritic Steels in PWR Water Environment Section XI, Division 1 |
30 | ASME/BPVC CASE N-647-2015 | 2015-07-01 | English | N-647 Alternative to Augmented Examination Requirements of IWE-2500 Section XI, Division 1 |
31 | ASME/BPVC CASE N-641-2015 | 2015-07-01 | English | N-641 Alternative Pressure-Temperature Relationship and Low Temperature Overpressure Protection System Requirements Section XI, Division 1 |
32 | ASME/BPVC CASE N-636-2015 | 2015-07-01 | English | N-636 Use of 18Cr-13Ni-3Mo (Alloy UNS S31703), 19Cr- 15Ni-4Mo (Alloy UNS S31725), and 18.5Cr-15.5Ni-4.5Mo-N (Alloy UNS S31726) Forgings, Seamless Tubing, Plate, Welded Tubing, Welded and Seamless Pipe, Welded Pipe With Addition of Filler Metal and Fitting |
33 | ASME/BPVC CASE N-637-1-2015 | 2015-07-01 | English | N-637-1 Use of 44Fe-25Ni-21Cr-Mo (Alloy UNS N08904) Plate, Bar, Fittings, Welded Pipe, and Welded Tube, Classes 2 and 3 Section III, Division 1 |
34 | ASME/BPVC CASE N-649-2015 | 2015-07-01 | English | N-649 Alternative Requirements for IWE-5240 Visual Examination Section XI, Division 1 |
35 | ASME/BPVC CASE N-644-1-2015 | 2015-07-01 | English | N-644-1 Weld Procedure Qualification for Procedures Exempt From PWHT in Classes 1, 2, and 3 Construction Section III, Division 1 |
36 | ASME/BPVC CASE N-642-2015 | 2015-07-01 | English | 8 Materials 3/16 in. (5 mm) Thick and Less Made by Autogenous Machine or Automatic Welding Section III, Division 1 |
37 | ASME/BPVC CASE N-633-2015 | 2015-07-01 | English | N-633 Use of SA-533/SA-533M, Type B, Class 2, Plate for Structural Attachments to Class CC Containment Liners Section III, Division 2 |
38 | ASME/BPVC CASE N-635-1-2015 | 2015-07-01 | English | N-635-1 Use of 22Cr-5Ni-3Mo-N (Alloy UNS S31803) Forgings, Plate, Bar, Welded and Seamless Pipe, and/or Tube, Fittings, and Fusion Welded Pipe With Addition of Filler Metal, Classes 1, 2, and 3 Section III, Division 1 |
39 | ASME/BPVC CASE N-624-2015 | 2015-07-01 | English | N-624 Successive Inspections Section XI, Division 1 |
40 | ASME/BPVC CASE N-632-2015 | 2015-07-01 | English | N-632 Use of ASTM A572, Grades 50 and 65 for Structural Attachments to Class CC Containment Liners Section III, Division 2 |
41 | ASME/BPVC CASE N-631-2015 | 2015-07-01 | English | N-631 Use of Fracture Toughness Test Data to Establish Reference Temperature for Pressure Retaining Materials Other Than Bolting for Class 1 Vessels Section III, Division 1 |
42 | ASME/BPVC CASE N-625-1-2015 | 2015-07-01 | English | N-625-1 Ni-Cr-Mo Alloy (UNS N06059) Welded Construction to 800°F Section III, Division 1 |
43 | ASME/BPVC CASE N-639-2015 | 2015-07-01 | English | N-639 Alternative Calibration Block Material Section XI, Division 1 |
44 | ASME/BPVC CASE N-560-2-2015 | 2015-07-01 | English | N-560-2 Alternative Examination Requirements for Class 1, Category B-J Piping Welds Section XI, Division 1 |
45 | ASME/BPVC CASE N-580-2-2015 | 2015-07-01 | English | N-580-2 Use of Alloy 600 With Columbium Added Section III, Division 1 |
46 | ASME/BPVC CASE N-618-2015 | 2015-07-01 | English | N-618 Use of a Reactor Pressure Vessel as a Transportation Containment System Section XI, Division 1 |
47 | ASME/BPVC CASE N-613-2-2015 | 2015-07-01 | English | N-613-2 Ultrasonic Examination of Full Penetration Nozzles in Vessels, Examination Category B-D, Reactor Nozzle- To-Vessel Welds and Nozzle Inside Radius Section, Figs. IWB-2500-7(a), (b), (c), and (d) Section XI, Division 1 |
48 | ASME/BPVC CASE N-606-2-2015 | 2015-07-01 | English | N-606-2 Similar and Dissimilar Metal Welding Using Ambient Temperature Machine GTAW Temper Bead Technique for BWR CRD Housing/Stub Tube Repairs Section XI, Division 1 |
49 | ASME/BPVC CASE N-610-2015 | 2015-07-01 | English | N-610 Alternative Reference Stress Intensity Factor (KIR) Curve for Class Components Section III, Division 1 |
50 | ASME/BPVC CASE N-620-2015 | 2015-07-01 | English | N-620 Rules for Class 1 Type M Pumps Section III, Division 1 |
51 | ASME/BPVC CASE N-561-2-2015 | 2015-07-01 | English | N-561-2 Alternative Requirements for Wall Thickness Restoration of Class 2 and High Energy Class 3 Carbon Steel Piping Section XI, Division 1 |
52 | ASME/BPVC CASE N-619-2015 | 2015-07-01 | English | N-619 Alternative Requirements for Nozzle Inner Radius Inspections for Class 1 Pressurizer and Steam Generator Nozzles Section XI, Division 1 |
53 | ASME/BPVC CASE N-607-2015 | 2015-07-01 | English | N-607 Guidance on Implementation of NS Certificate of Accreditation Section III, Division 1 |
54 | ASME/BPVC CASE N-594-1-2015 | 2015-07-01 | English | N-594-1 Repairs to P-4 and P-5A Castings Without Postweld Heat Treatment Class 1, 2, and 3 Construction Section III, Division 1 |
55 | ASME/BPVC CASE N-600-2015 | 2015-07-01 | English | N-600 Transfer of Welder, Welding Operator, Brazer, and Brazing Operator Qualifications Between Owners Section XI, Division 1 |
56 | ASME/BPVC CASE N-576-2-2015 | 2015-07-01 | English | N-576-2 Repair of Classes 1 and 2 SB-163, UNS N06600 Steam Generator Tubing Section XI, Division 1 |
57 | ASME/BPVC CASE N-609-1-2015 | 2015-07-01 | English | N-609-1 Alternative Requirements to Stress-Based Selection Criteria for Category B-J Welds Section XI, Division 1 |
58 | ASME/BPVC CASE N-593-2-2015 | 2015-07-01 | English | N-593-2 Examination Requirements for Steam Generator Nozzleto- Vessel Welds Section XI, Division 1 |
59 | ASME/BPVC CASE N-586-1-2015 | 2015-07-01 | English | N-586-1 Alternative Additional Examination Requirements for Classes 1, 2, and 3 Piping, Components, and Supports Section XI, Division 1 |
60 | ASME/BPVC CASE N-569-1-2015 | 2015-07-01 | English | N-569-1 Alternative Rules for Repair by Electrochemical Deposition of Classes 1 and 2 Steam Generator Tubing Section XI, Division 1 |
61 | ASME/BPVC CASE N-579-2015 | 2015-07-01 | English | N-579 Use of Nonstandard Nuts, Class 1, 2, and 3, MC, CS Components and Supports Construction Section III, Division 1 |
62 | ASME/BPVC CASE N-570-2-2015 | 2015-07-01 | English | N-570-2 Alternative Rules for Linear Piping and Linear Standard Supports for Classes 1, 2, 3, and MC Section III, Division 1 |
63 | ASME/BPVC CASE N-564-2-2015 | 2015-07-01 | English | N-564-2 UNS J93380, Alloy CD3MWCuN, Classes 2 and 3 Construction Section III, Division 1 |
64 | ASME/BPVC CASE N-578-1-2015 | 2015-07-01 | English | N-578-1 Risk-Informed Requirements for Class 1, 2, or 3 Piping, Method B Section XI, Division 1 |
65 | ASME/BPVC CASE N-575-2015 | 2015-07-01 | English | N-575 Alternative Examination Requirements for Full Penetration Nozzle-to-Vessel Welds in Reactor Vessels With Set-On Type Nozzles Section XI, Division 1 |
66 | ASME/BPVC CASE N-565-2015 | 2015-07-01 | English | N-565 Alternative Methods of Nozzle Attachment for Class 1 Vessels Section III, Division 1 |
67 | ASME/BPVC CASE N-552-1-2015 | 2015-07-01 | English | N-552-1 Alternative Methods — Qualification for Nozzle Inside Radius Section From the Outside Surface Section XI, Division 1 |
68 | ASME/BPVC CASE N-566-2-2015 | 2015-07-01 | English | N-566-2 Corrective Action for Leakage Identified at Bolted Connections Section XI, Division 1 |
69 | ASME/BPVC CASE N-597-3-2015 | 2015-07-01 | English | N-597-3 Evaluation of Pipe Wall Thinning Section XI, Division 1 |
70 | ASME/BPVC CASE N-557-1-2015 | 2015-07-01 | English | N-557-1 In-Place Dry Annealing of a PWR Nuclear Reactor Vessel Section XI, Division 1 |
71 | ASME/BPVC CASE N-548-2015 | 2015-07-01 | English | N-548 Air Cooling of SA-182 Grades F304, F304L, F316, F316L Forgings Instead of Liquid Quenching After Solution Heat Treatment, Classes 1, 2, and 3 Section III, Division 1 |
72 | ASME/BPVC CASE N-577-1-2015 | 2015-07-01 | English | N-577-1 Risk-Informed Requirements for Class 1, 2, or 3 Piping, Method A Section XI, Division 1 |
73 | ASME/BPVC CASE N-589-1-2015 | 2015-07-01 | English | N-589-1 Class 3 Nonmetallic Cured-In-Place Piping Section XI, Division 1 |
74 | ASME/BPVC CASE N-249-15-2015 | 2015-07-01 | English | N-249-15 Additional Materials for Subsection NF, Class 1, 2, 3, and MC Supports Fabricated Without Welding Section III, Division 1 |
75 | ASME/BPVC CASE N-290-1-2015 | 2015-07-01 | English | N-290-1 Expansion Joints in Class 1, Liquid Metal Piping Section III, Division 1 |
76 | ASME/BPVC CASE N-508-4-2015 | 2015-07-01 | English | N-508-4 Rotation of Snubbers and Pressure Retaining Items for the Purpose of Testing or Preventive Maintenance Section XI, Division 1 |
77 | ASME/BPVC CASE N-511-2015 | 2015-07-01 | English | N-511 Design Temperatures for Atmospheric and 0–15 psi Storage Tanks Section III, Division 1 |
78 | ASME/BPVC CASE N-537-2015 | 2015-07-01 | English | N-537 Location of Ultrasonic Depth-Sizing Flaws Section XI, Division 1 |
79 | ASME/BPVC CASE N-530-2015 | 2015-07-01 | English | N-530 Provisions for Establishing Allowable Axial Compressive Membrane Stresses in the Cylindrical Walls of 0-15 psi Storage Tanks, Classes 2 and 3 Section III, Division 1 |
80 | ASME/BPVC CASE N-528-1-2015 | 2015-07-01 | English | N-528-1 Purchase, Exchange, or Transfer of Material Between Nuclear Plant Sites Section XI, Division 1 |
81 | ASME/BPVC CASE N-525-2015 | 2015-07-01 | English | N-525 Design Stress Intensities and Yield Strength Values for UNS N06690 With a Minimum Specified Yield Strength of 30 ksi, Class 1 Components Section III, Division 1 |
82 | ASME/BPVC CASE N-520-6-2015 | 2015-07-01 | English | N-520-6 Alternative Rules for Renewal of Active or Expired Certificates for Plants Not in Active Construction Section III, Division 1 |
83 | ASME/BPVC CASE N-517-1-2015 | 2015-07-01 | English | N-517-1 Quality Assurance Program Requirements for Owners Section XI, Division 1 |
84 | ASME/BPVC CASE N-454-1-2015 | 2015-07-01 | English | N-454-1 Nickel-Chromium-Molybdenum-Copper Stainless Steels (UNS N08925 and N08926) Wrought Fittings for Class 2 and 3 Construction Section III, Division 1 |
85 | ASME/BPVC CASE N-483-3-2015 | 2015-07-01 | English | N-483-3 Alternative Rules to the Provisions of NCA-3800, Requirements for Purchase of Material Section III, Division 1; Section III, Division 3 |
86 | ASME/BPVC CASE N-500-4-2015 | 2015-07-01 | English | N-500-4 Alternative Rules for Standard Supports for Classes 1, 2, 3, and MC Section III, Division 1 |
87 | ASME/BPVC CASE N-432-1-2015 | 2015-07-01 | English | N-432-1 Repair Welding Using Automatic or Machine Gas Tungsten-Arc Welding (GTAW) Temper Bead Technique Section XI, Division 1 |
88 | ASME/BPVC CASE N-498-4-2015 | 2015-07-01 | English | N-498-4 Alternative Requirements for 10-Year System Hydrostatic Testing for Class 1, 2, and 3 Systems Section XI, Division 1 |
89 | ASME/BPVC CASE N-455-1-2015 | 2015-07-01 | English | N-455-1 Nickel-Chromium-Molybdenum-Copper Stainless Steels (UNS N08925 and N08926) Forged Flanges and Fittings for Class 2 and 3 Construction Section III, Division 1 |
90 | ASME/BPVC CASE N-505-2015 | 2015-07-01 | English | N-505 Alternative Rules for the Examination of Butt Welds Used as Closure Welds for Electrical Penetration Assemblies in Containment Structures Section III, Division 1 |
91 | ASME/BPVC CASE N-493-2015 | 2015-07-01 | English | N-493 Alternative Radiographic Acceptance Criteria for Vessels Used as Shipping Casks, Class 1 Section III, Division 1 ANNULLED |
92 | ASME/BPVC CASE N-469-1-2015 | 2015-07-01 | English | N-469-1 Martensitic Stainless Steel for Classes 1, 2, and 3 Components Section III, Division 1 |
93 | ASME/BPVC CASE N-452-2015 | 2015-07-01 | English | N-452 Specialized Subcontracted Welding Process (Electron Beam Welding) Section III, Division 1 |
94 | ASME/BPVC CASE N-312-2015 | 2015-07-01 | English | N-312 Use of Stud Welds to Anchor Section III, Division 1, Class MC Vessels to Section III, Division 2, Class CC Concrete Containment Structures Section III, Division 2 |
95 | ASME/BPVC CASE N-154-1-2015 | 2015-07-01 | English | N-154-1 Projection Resistance Welding of Valve Seats, Classes 1, 2, and 3 Section III, Division 1 |
96 | ASME/BPVC CASE N-460-2015 | 2015-07-01 | English | N-460 Alternative Examination Coverage for Class 1 and Class 2 Welds Section XI, Division 1 |
97 | ASME/BPVC CASE N-453-3-2015 | 2015-07-01 | English | N-453-3 Nickel-Chromium-Molybdenum-Copper Stainless Steel (UNS N08925 and N08926) for Class 2 and 3 Construction Section III, Division 1 |
98 | ASME/BPVC CASE N-205-2015 | 2015-07-01 | English | N-205 Use of Ductile Iron SA-395, Class 3 Section III, Division 1 |
99 | ASME/BPVC CASE N-319-3-2015 | 2015-07-01 | English | N-319-3 Alternate Procedure for Evaluation of Stresses in Butt Welding Elbows in Class 1 Piping Section III, Division 1 |
100 | ASME/BPVC CASE N-405-1-2015 | 2015-07-01 | English | N-405-1 Socket Welds Section III, Division 1 |
101 | ASME/BPVC CASE N-351-2015 | 2015-07-01 | English | N-351 Use of Subsize Charpy V-Notch Specimens Section III, Division 1 |
102 | ASME/BPVC CASE N-373-3-2015 | 2015-07-01 | English | 5B Group 1 Material, Classes 1, 2, and 3 Section III, Division 1 |
103 | ASME/BPVC CASE N-369-2015 | 2015-07-01 | English | N-369 Resistance Welding of Bellows Section III, Division 1 |
104 | ASME/BPVC CASE N-315-2015 | 2015-07-01 | English | N-315 Repair of Bellows Section III, Division 1 |
105 | ASME/BPVC CASE N-258-2-2015 | 2015-07-01 | English | N-258-2 Design of Interaction Zones for Concrete Containments Section III, Division 2 |
106 | ASME/BPVC CASE N-494-4-2015 | 2015-07-01 | English | N-494-4 Pipe Specific Evaluation Procedures and Acceptance Criteria for Flaws in Piping that Exceed the Acceptance Standards Section XI, Division 1 |
107 | ASME/BPVC CASE N-539-2015 | 2015-07-01 | English | N-539 UNS N08367 in Class 2 and 3 Valves Section III, Division 1 |
108 | ASME/BPVC CASE N-532-5-2015 | 2015-07-01 | English | N-532-5 Repair/Replacement Activity Documentation Requirements and Inservice Inspection Summary Report Preparation and Submission Section XI, Division 1 |
109 | ASME/BPVC CASE N-284-4-2015 | 2015-07-01 | English | N-284-4 Metal Containment Shell Buckling Design Methods, Class MC, TC, and SC Construction Section III, Division 1; Section III, Division 3 |
110 | ASME/BPVC CASE N-526-2015 | 2015-07-01 | English | N-526 Alternative Requirements for Successive Inspections of Class 1 and 2 Vessels Section XI, Division 1 |
111 | ASME/BPVC CASE N-504-4-2015 | 2015-07-01 | English | N-504-4 Alternative Rules for Repair of Classes 1, 2, and 3 Austenitic Stainless Steel Piping Section XI, Division 1 |
112 | ASME/BPVC CASE N-131-1-2015 | 2015-07-01 | English | N-131-1 Material for Internal Pressure Retaining Items for Pressure Relief Valves, Classes 1, 2, and 3 Section III, Division 1 |
113 | ASME/BPVC CASE N-133-3-2015 | 2015-07-01 | English | N-133-3 Use of SB-148 Alloys 952 and 954, Class 3 Section III, Division 1 |
114 | ASME/BPVC CASE N-4-13-2015 | 2015-07-01 | English | N-4-13 Special Type 403 Modified Forgings or Bars, Class 1 and CS Section III, Division 1 |
115 | ASME/BPVC CASE N-62-7-2015 | 2015-07-01 | English | N-62-7 Internal and External Valve Items, Classes 1, 2, and 3 Section III, Division 1 |
116 | ASME/BPVC 2810-2015 | 2015-07-01 | English | 2810 Use of UNS N08367 Material for Construction Section I |
117 | ASME/BPVC 2820-2015 | 2015-07-01 | English | 2820 Composite Pressure Vessels for High Pressure Fluids in Accordance With Mandatory Appendix 8 Section X |
118 | ASME/BPVC 2819-2015 | 2015-07-01 | English | 2819 Implementation of ASME Certification Mark and Applicable Designator Section VIII, Division 3 |
119 | ASME/BPVC 2813-2015 | 2015-07-01 | English | 2813 Laser Marking of Welded Hot Water Heating Boilers Section IV |
120 | ASME/BPVC 2815-2015 | 2015-07-01 | English | 2815 Use of SA-336/SA-336M Class F91 Section VIII, Division 2 |
121 | ASME/BPVC 2794-2015 | 2015-07-01 | English | 2794 Solution Annealed Ni-24Fe-23Cr-6Mo-3Cu, UNS N06845, Seamless Pipe and Tube, Plate, Sheet, Strip, Rod, and Bar Section VIII, Division 1 |
122 | ASME/BPVC 2817-2015 | 2015-07-01 | English | 2817 Section VIII, Division 1 Plate-and-Frame Heat Exchanger in Section I Feedwater System Section I |
123 | ASME/BPVC 2805-2015 | 2015-07-01 | English | 2805 Alternate Rules to PG-26 for Nickel Base Alloys Section I |
124 | ASME/BPVC 2814-2015 | 2015-07-01 | English | 2814 Figure UW-13.4, Illustration (a) Section VIII, Division 1 |
125 | ASME/BPVC 2811-2015 | 2015-07-01 | English | 2811 SA/EN 10025-2 Steel Grades S235J2, S275J2, and S355J2 Section VIII, Division 1 |
126 | ASME/BPVC 2798-2015 | 2015-07-01 | English | 2798 Welding Filler Metals Section II, Part C |
127 | ASME/BPVC 2797-2015 | 2015-07-01 | English | 2797 Material Requirements for Valve Stems for Use With Power-Actuated Pressure Relief Systems Section VIII, Division 3 |
128 | ASME/BPVC 2795-2015 | 2015-07-01 | English | 2795 Use of PTFE Tubing Material for Flue Gas Heat Exchanger Tubes Section VIII, Division 1 |
129 | ASME/BPVC 2807-2015 | 2015-07-01 | English | 2807 Exemption From Post-Bending Heat Treatment Requirements for Carbon and Low-Alloy Steel Tube and Pipe Section VIII, Division 1 |
130 | ASME/BPVC 2806-2015 | 2015-07-01 | English | 2806 Rules for Calculating Maximum Permissible Gaps for Layered Vessels in 4.13.12.3 Section VIII, Division 2 |
131 | ASME/BPVC 2809-2015 | 2015-07-01 | English | 2809 58Ni-29Cr-9Fe Alloy (UNS N06690) Section I |
132 | ASME/BPVC 2784-2015 | 2015-07-01 | English | 2784 Use of 17Cr-4Ni-4Cu (UNS S17400) Condition H1150D or H1150M Section VIII, Division 1 |
133 | ASME/BPVC 2800-2015 | 2015-07-01 | English | 2800 Use of Sand Cast Aluminum Alloy A356.0, T6 Temper (UNS A13560) for the Manufacture of Hot Water Heating Boilers Under Part HA Section IV |
134 | ASME/BPVC 2816-2015 | 2015-07-01 | English | 2816 Use of Ultrasonic Examination in Lieu of Radiography for Material Thickness Less Than 1/2 in. (13 mm) But Greater Than or Equal to 1/4 in. (6 mm) Section I |
135 | ASME/BPVC 2812-2015 | 2015-07-01 | English | 2812 Pneumatic Testing of Welded Hot Water Heating Boilers Section IV |
136 | ASME/BPVC 2818-2015 | 2015-07-01 | English | 2818 Acoustic Pulse Reflectometry (APR) Examination Method That May Be Used for Examination of Heat Exchanger Tubing and Other Tubing and Piping Section V |
137 | ASME/BPVC 2803-2015 | 2015-07-01 | English | 2803 Use of Thermometers With Minimum Full-Scale Range of 50°F to 250°F (10°C to 120°C) Section IV |
138 | ASME/BPVC 2801-2015 | 2015-07-01 | English | 2801 Alloy SUS 430J1LTB/JIS G 3463:2006 Tubes for Heating Boilers Section IV |
139 | ASME/BPVC 2802-2015 | 2015-07-01 | English | 2802 Alloy SUS 430J1LTB/JIS G 3463:2006 Tubes for Water Heaters Section IV |
140 | ASME/BPVC 2804-2015 | 2015-07-01 | English | 2804 Corrected Forming Strain Equation, Table 6.1 Section VIII, Division 2 |
141 | ASME/BPVC 2799-2015 | 2015-07-01 | English | 2799 Induction Kinetic Welding Section IX |
142 | ASME/BPVC 2793-2015 | 2015-07-01 | English | 2793 Use of SA-705/SA-705M, Type XM-12, Condition H1025 for Primary Pressure Boundary Components in Contact With Water or Aqueous Solution Section VIII, Division 3 |
143 | ASME/BPVC 2792-2015 | 2015-07-01 | English | 2792 57Ni-22Cr-14W-2Mo-La Alloy (UNS N06230) Wrought and Welded Tubing Section I; Section II, Part B; Section VIII, Division 1 |
144 | ASME/BPVC 2791-2015 | 2015-07-01 | English | 2791 Joining of SB-283, UNS C37700 Fittings to SB-75 Tubing Section IV |
145 | ASME/BPVC 2782-2015 | 2015-07-01 | English | 2782 Cu-13Zn-1.1Ni-Si-Al Alloy Seamless Pipe and Tubing Section I |
146 | ASME/BPVC 2790-2015 | 2015-07-01 | English | 2790 Use of Type XM-12, Condition H900 Material With a Reduced Tensile Strength Section VIII, Division 3 |
147 | ASME/BPVC 2789-2015 | 2015-07-01 | English | 2789 Laser Measurement for Out-of-Roundness Section VIII, Division 1 |
148 | ASME/BPVC 2786-2015 | 2015-07-01 | English | 2786 Alloy UNS S30815 Up to 1,700°F (927°C) Section I; Section VIII, Division 1 |
149 | ASME/BPVC 2788-2015 | 2015-07-01 | English | 2788 SA-240/SA-240M, UNS S43932 Plate Section VIII, Division 1 |
150 | ASME/BPVC 2787-2015 | 2015-07-01 | English | 2787 Multiple Marking of Certified Capacities for Pressure-Relief Valves Section VIII, Division 1 |
151 | ASME/BPVC 2785-1-2015 | 2015-07-01 | English | 2785-1 Use of Sand Cast Aluminum Alloy EN AC AlSi10Mg(a), F Temper, Cast Sections in the Manufacture of Hot Water Heating Boilers Under Part HA After January 1, 2014 Section IV |
152 | ASME/BPVC 2744-2015 | 2015-07-01 | English | 2744 Composite Pressure Vessel Analysis Section X |
153 | ASME/BPVC 2743-2015 | 2015-07-01 | English | 2743 Composite Class III Pressure Vessel Batch Cycle Testing Section X |
154 | ASME/BPVC 2742-2015 | 2015-07-01 | English | 2742 Composite Class III Pressure Vessel Lower Cycle Pressure Limit Section X |
155 | ASME/BPVC 2740-2015 | 2015-07-01 | English | 2740 25Cr-7Ni-4Mo-N (UNS S32750) Austenitic-Ferritic Stainless Steel Section VIII, Division 2 |
156 | ASME/BPVC 2741-2015 | 2015-07-01 | English | 4 Material Welded to Lower P-Number Material Section I |
157 | ASME/BPVC 2739-2015 | 2015-07-01 | English | 2739 Alternative Diameter-To-Thickness Ratios for Spherical and Formed Heads With Openings Section VIII, Division 2 |
158 | ASME/BPVC 2734-1-2015 | 2015-07-01 | English | 2734-1 F-Number Grouping for Ni-Fe-Cr, Classification UNS N08087 Welding Electrode Section IX |
159 | ASME/BPVC 2731-2015 | 2015-07-01 | English | 2731 Exemption From Mandatory Requirement for Fusible Plug in Hand-Fired Boilers Section I |
160 | ASME/BPVC 2727-2015 | 2015-07-01 | English | 2727 22Cr-5Ni-3Mo-N (UNS S31803) Use to 600°F (316°C) Section VIII, Division 2 |
161 | ASME/BPVC 2730-2015 | 2015-07-01 | English | 2730 Allowable Stresses and Design Stress Intensities for Bolting Materials Listed in Both Tables 3 and 4 of Section II, Part D Section VIII, Division 2 |
162 | ASME/BPVC 2728-2015 | 2015-07-01 | English | 2728 Use of SB-564 Nickel-Iron-Chromium- Molybdenum-Copper Alloy UNS N08825 Forgings Section VIII, Division 2 |
163 | ASME/BPVC 2732-1-2015 | 2015-07-01 | English | 2732-1 Use of Nameplates in Inventory for Construction Section VIII, Division 1 |
164 | ASME/BPVC 2724-2015 | 2015-07-01 | English | 2724 Use of ER310 Filler Metals to Weld UNS S43035, Grades 439 and TP439 Materials to Austenitic Grades 304, 304L, 316, 316L, and 316Ti for the Construction of Heating Boilers Section IV |
165 | ASME/BPVC 2720-2015 | 2015-07-01 | English | S235JR Plate in the Construction of Boilers Section IV |
166 | ASME/BPVC 2725-2015 | 2015-07-01 | English | 2725 Polymer Material for Heating Boiler Components Section IV |
167 | ASME/BPVC 2722-1-2015 | 2015-07-01 | English | 2722-1 Use of SA-240/SA-240M, Alloys 439 and UNS S43932, and SA-268, alloy TP439 Up to 210°F (99°C) in Heating Boiler Construction Section IV |
168 | ASME/BPVC 2726-2015 | 2015-07-01 | English | 2726 Hydrostatic and Pneumatic Testing of Mass-Produced Pressure Vessels With an Intermediate Isolation Valve Between Indicating Gage and Pressure Vessel Section VIII, Division 1 |
169 | ASME/BPVC 2781-2015 | 2015-07-01 | English | 2781 12Cr-1.5W-1.6Co-B Material Section I |
170 | ASME/BPVC 2723-2015 | 2015-07-01 | English | 2723 UNS S31635 Tubing for Construction of Water Heaters Section IV |
171 | ASME/BPVC 2717-2015 | 2015-07-01 | English | 2717 Cast Titanium Aluminum Vanadium Iron Alloy, SB-367, Grade C-38 (Ti 4Al-2.5V-1.5Fe) UNS R54250 Section VIII, Division 1 |
172 | ASME/BPVC 2779-2015 | 2015-07-01 | English | 2779 SA/EN10028-2 Grades P235GH, P265GH, P295GH, and P355GH Section IV |
173 | ASME/BPVC 2719-2015 | 2015-07-01 | English | X6CrNiMoTi 17-12-2 Sheet, Plate, and Strip in the Construction of Boilers Section IV |
174 | ASME/BPVC 2718-2015 | 2015-07-01 | English | 2718 Alternative Minimum Test Temperature for Hydrostatic Testing Section VIII, Division 2 |
175 | ASME/BPVC 2715-2015 | 2015-07-01 | English | 2715 Use of Glass Bulls-Eye Water Level Indicators on Electric Boilers Section I |
176 | ASME/BPVC 2752-2015 | 2015-07-01 | English | 2752 22Cr-25Ni-3.5W-3Cu Austenitic Stainless Steel UNS S31035 Section VIII, Division 1 |
177 | ASME/BPVC 2777-2015 | 2015-07-01 | English | 2777 Use of Resistance Longitudinal Butt Welds for Cylinders Section IX |
178 | ASME/BPVC 2776-2015 | 2015-07-01 | English | 2776 Use of 52Ni-22Cr-13Co-9Mo (UNS N06617), Annealed Bolting Materials for Pressure Vessels Section VIII, Division 1 |
179 | ASME/BPVC 2737-1-2015 | 2015-07-01 | English | 2737-1 7% Ni Thermo-Mechanical Control Processed Steel Plate for Cryogenic Applications Section VIII, Division 2 |
180 | ASME/BPVC 2712-1-2015 | 2015-07-01 | English | 2712-1 Spherical Intermediate Head or End Closure Without Straight Flange Section VIII, Division 1 |
181 | ASME/BPVC 2711-2015 | 2015-07-01 | English | 2711 Use of AS 1548-2008 Grades PT430N/PT430NR, PT460N/PT460NR, PT490N/PT490NR Section VIII, Division 2 |
182 | ASME/BPVC 2710-1-2015 | 2015-07-01 | English | 2710-1 Application of the ASME Certification Mark Section I; Section IV; Section X; Section XII |
183 | ASME/BPVC 2778-2015 | 2015-07-01 | English | 2778 Use of UNS S32205 Ferritic/Austenitic Stainless Steel Plate, Sheet, Strip, Pipe, and Tube in the Manufacture of Part HLW Water Heaters and Storage Tanks Section IV |
184 | ASME/BPVC 2753-2015 | 2015-07-01 | English | 2753 22Cr-25Ni-3.5W-3Cu Austenitic Stainless Steel UNS S31035 Section I |
185 | ASME/BPVC 2767-2015 | 2015-07-01 | English | 2767 Use of Welded UNS N02200, N02201, and N04400 Alloy Pipe and Tube Section VIII, Division 1 |
186 | ASME/BPVC 2748-1-2015 | 2015-07-01 | English | 2748-1 Use of SA/EN 10028-2, Grade 20MnMoNi4-5, Quenched and Tempered Steel Plate Section VIII, Division 2 |
187 | ASME/BPVC 2772-2015 | 2015-07-01 | English | 2772 Exceptions to Requirements of Figure UW-13.2, Sketches (m) and (n) Section VIII, Division 1 |
188 | ASME/BPVC 2766-2015 | 2015-07-01 | English | 2766 Determination of MAWP for Plate Heat Exchangers Section VIII, Division 1; Section VIII, Division 2 |
189 | ASME/BPVC 2774-2015 | 2015-07-01 | English | 2774 Waiver of Weld Joint Examination for Pneumatically Tested Brazed Plate-Type Heat Exchangers That Have Been Previously Hydrostatically Tested Section VIII, Division 1 |
190 | ASME/BPVC 2756-2015 | 2015-07-01 | English | 2756 57Ni-22Cr-14W-2Mo-La Alloy (UNS N06230) Autogenously Welded Tube and Seamless Pipe and Tube Section I |
191 | ASME/BPVC 2773-2015 | 2015-07-01 | English | 2773 Use of Sand Cast Aluminum Alloy EN AC-43000, AlSi10Mg(a), F Temper Section IV |
192 | ASME/BPVC 2763-2015 | 2015-07-01 | English | 2763 Alloy SUS 430J1L/JIS G 4305:2005 Plates for Part HF Section IV |
193 | ASME/BPVC 2770-2015 | 2015-07-01 | English | 2770 Grade 91 Steel, 9%Cr-1%Mo (UNS K90901) Section I |
194 | ASME/BPVC 2771-2015 | 2015-07-01 | English | 2771 SA-738/SA-738M, Grade E Steel Plates Section VIII, Division 3 |
195 | ASME/BPVC 2757-2015 | 2015-07-01 | English | 2757 Alternative Welding Operator Performance Weld Qualification Test Section IX |
196 | ASME/BPVC 2755-2015 | 2015-07-01 | English | 2755 Exemption from Preheat and PWHT for Autogenous Buttwelding of SA-213/SA-213M T22 Seamless Tubing Section I |
197 | ASME/BPVC 2758-2015 | 2015-07-01 | English | 2758 SA-240/SA-240M, UNS S43035 Plate Section VIII, Division 1 |
198 | ASME/BPVC 2754-2015 | 2015-07-01 | English | 2754 Use of SA-193/SA-193M Grade B16 Bolting in Diameters Larger Than 7 in. (175 mm) Section VIII, Division 1; Section VIII, Division 2 |
199 | ASME/BPVC 2759-2015 | 2015-07-01 | English | 2759 Use of SA-705/SA-705M, XM-12, Condition H1025 for Yoke-Supported End Plugs Section VIII, Division 3 |
200 | ASME/BPVC 2769-2015 | 2015-07-01 | English | 2769 Use of SA-240 Types 316Ti, 316L, 439 (UNS S43035), and UNS S43932 to Construct Water Heating Boilers With Cylindrical Parts Larger Than 38 in. (950 mm) Outside Diameter Section IV |
201 | ASME/BPVC 2765-2015 | 2015-07-01 | English | 2765 Alloy SUS 430J1L/JIS G 4305:2005 Plates for Part HLW Section IV |
202 | ASME/BPVC 2768-2015 | 2015-07-01 | English | 2768 Allowing the Use of SB-543 Alloy UNS C70600 Tube Section IV |
203 | ASME/BPVC 2747-2015 | 2015-07-01 | English | 2747 Composite Pressure Vessel Nozzle Design Change Section X |
204 | ASME/BPVC 2735-2015 | 2015-07-01 | English | 2735 Use of UNS S82011 Stainless Steel Section VIII, Division 1 |
205 | ASME/BPVC 2764-1-2015 | 2015-07-01 | English | 2764-1 Use of SA-240/SA-240M Types 304L, 316Ti, 316L, 439 (UNS S43035), and UNS S43932 to Construct Water Heating Boilers for a Maximum Pressure of 160 psi (1 100 kPa) Section IV |
206 | ASME/BPVC 2749-1-2015 | 2015-07-01 | English | 2749-1 Use of EN 10222-2:1999, Grade 18MnMoNi5-5, Steel Forgings Section VIII, Division 2 |
207 | ASME/BPVC 2745-1-2015 | 2015-07-01 | English | 2745-1 Composite Pressure Vessels for High-Pressure Fluids Section X |
208 | ASME/BPVC 2746-2015 | 2015-07-01 | English | 2746 Composite Pressure Vessel Pressurization Rate Section X |
209 | ASME/BPVC 2760-2015 | 2015-07-01 | English | 2760 Attaching Tubes to Tubesheets Using Laser Beam Welding Without Full Penetration Section IV |
210 | ASME/BPVC 2751-2015 | 2015-07-01 | English | 2751 Alternative Rules for Hemispherical Head Attached to Cylindrical Shell Having Integral Backing Ring That Is Part of the Shell Section VIII, Division 1 |
211 | ASME/BPVC 2706-2015 | 2015-07-01 | English | 2706 Use of SB-584 (UNS C87500) Copper Alloy Sand Castings in the Manufacture of Nonstandard Pressure Parts for Hot Water Heating Boilers and Potable Water Heaters Section IV |
212 | ASME/BPVC 2707-2015 | 2015-07-01 | English | 2707 Use of SA-240/SA-240M UNS S41003 Plate in the Construction of Boilers Section IV |
213 | ASME/BPVC 2698-2015 | 2015-07-01 | English | 2698 Use of High Strength Low Alloy Steel Castings Section VIII, Division 3 |
214 | ASME/BPVC 2700-2015 | 2015-07-01 | English | 2700 Use of SA-638 Grade 660 (UNS S66286) Up to 900°F (482°C) Section VIII, Division 3 |
215 | ASME/BPVC 2699-2015 | 2015-07-01 | English | 2699 Values of Tensile Strength for SA-564 and SA-705, Grade XM-12, Condition H1100 Materials Section VIII, Division 3 |
216 | ASME/BPVC 2701-1-2015 | 2015-07-01 | English | 2701-1 Maximum Dynamic Pressure During Vented Deflagration for Vessels in Low Density Polyethylene Service Section VIII, Division 3 |
217 | ASME/BPVC 2704-2015 | 2015-07-01 | English | 2704 Vessel (Production) Impact Tests for Welded Construction of Austenitic Stainless Steels Section VIII, Division 1 |
218 | ASME/BPVC 2695-2015 | 2015-07-01 | English | 2695 Allowing Section VIII, Division 2 Design Rules to Be Used for Section VIII, Division 1 Pressure Vessel Section VIII, Division 1; Section VIII, Division 2 |
219 | ASME/BPVC 2705-2015 | 2015-07-01 | English | 2705 Revised Data Report Forms Section XII |
220 | ASME/BPVC 2709-2015 | 2015-07-01 | English | 2709 UNS S43035 SA-268 Grade TP439 Welded Tubing Section IV |
221 | ASME/BPVC 2702-2-2015 | 2015-07-01 | English | 2702-2 Seamless Ni-25Cr-20Co Material Section I |
222 | ASME/BPVC 2708-2015 | 2015-07-01 | English | 2708 Use of SA-240/SA-240M UNS S43035 (Grade 439) and UNS S43932 Less Than 1/4 in. (6 mm) in Thickness for the Construction of Water Boilers Intended for Working Pressures Up to 160 psi (1 100 kPa) Under Part HF Section IV |
223 | ASME/BPVC 2690-1-2015 | 2015-07-01 | English | 2690-1 Attaching Nozzles and Fittings to Headers and Vessels Section IV |
224 | ASME/BPVC 2685-2015 | 2015-07-01 | English | 2685 Special Requirements for Filament-Winding Procedure Qualification (Class I Vessels) Section X |
225 | ASME/BPVC 2688-2015 | 2015-07-01 | English | 2688 Use of Austenitic Stainless Steel Material With Minimum Thickness of 0.020 in. (0.5 mm) for Hot Water Heating Boilers Section IV |
226 | ASME/BPVC 2686-2015 | 2015-07-01 | English | 2686 Use of Appendix 23 for External Pressure Design of Copper and Copper Alloy Condenser and Heat Exchanger Tubes With Integral Fins at Elevated Temperatures Section VIII, Division 1 |
227 | ASME/BPVC 2683-2015 | 2015-07-01 | English | 2683 Use of Method A as the Only Design Basis for Class II Vessels Section X |
228 | ASME/BPVC 2676-2015 | 2015-07-01 | English | 2676 Alternative Procedure for Calculating Allowable Axial Compressive Stress in Cylindrical Shells Constructed of 21/4Cr-1Mo Steel at Temperatures Greater Than 700°F and Less Than or Equal to 1000°F Section VIII, Division 1 |
229 | ASME/BPVC 2680-2015 | 2015-07-01 | English | 2680 Other Recognized Standards for Definition of Wind and Earthquake Loading in Lieu of ASCE/SEI 7 Section VIII, Division 2 |
230 | ASME/BPVC 2681-2015 | 2015-07-01 | English | 2681 Use of 9Ni, 8Ni, and 5Ni-1/4Mo Materials in Welded Condition for Construction Section VIII, Division 2 |
231 | ASME/BPVC 2678-1-2015 | 2015-07-01 | English | 2678-1 Replacement Parts for Pressure Vessels Section VIII, Division 3 |
232 | ASME/BPVC 2677-2015 | 2015-07-01 | English | 2677 Welding of Aluminum Alloy Tube-to-Tubesheet Joints by Friction Stir Welding (FSW) Process Section VIII, Division 1 |
233 | ASME/BPVC 2679-2015 | 2015-07-01 | English | 2.3.2 and 2.4.1 for Wind Load Factors Section VIII, Division 2 |
234 | ASME/BPVC 2673-2015 | 2015-07-01 | English | 2673 Tolerance for External Pressure Design Conditions Section VIII, Division 2 |
235 | ASME/BPVC 2691-2015 | 2015-07-01 | English | 2691 Revised Manufacturers Data Reports Section IV |
236 | ASME/BPVC 2684-3-2015 | 2015-07-01 | English | 2684-3 47Ni-23Cr-23Fe-7W, UNS N06674, Alloy Seamless Pipe and Tube, and Forgings Section I; Section VIII, Division 1 |
237 | ASME/BPVC 2682-2015 | 2015-07-01 | English | 2682 Alternative Procedure for Calculating Allowable Axial Compressive Stress and External Pressure in Cylindrical Shells Constructed of Stainless Steel Alloy 253MA (UNS S30815) at Temperatures Greater Than 1200°F (650°C) and Less Than or Equal to 1650°F |
238 | ASME/BPVC 2693-1-2015 | 2015-07-01 | English | 2693-1 Use of Nickel Alloy UNS N08367 in Construction of Boilers Section IV |
239 | ASME/BPVC 2694-2015 | 2015-07-01 | English | 2694 Use of Magnetically Impelled Arc Butt Welding (MIABW) Section I |
240 | ASME/BPVC 2696-2015 | 2015-07-01 | English | 2696 Use of SA-240/SA-240M UNS S41003 Plates in the Construction of Boilers Section I |
241 | ASME/BPVC 2692-2015 | 2015-07-01 | English | 2692 Allowance to Use Provisions of HG-402.5 as Alternative to Using Steam to Determine Set Pressure for “Pressure Only” Safety Relief Valves During Capacity Certification Testing Section IV |
242 | ASME/BPVC 2624-2015 | 2015-07-01 | English | 2624 Intermodal Transport Tanks (UN T50 Portable Tanks) Section VIII, Division 2 |
243 | ASME/BPVC 2627-2015 | 2015-07-01 | English | 2627 Use of Aluminum Alloy EN AW-6060 T1 Extruded (Integrally) Finned Tube in the Manufacture of Hot Water Heating Boilers Section IV |
244 | ASME/BPVC 2634-2015 | 2015-07-01 | English | 2634 Inspection Openings in Small Pressure Vessels Section VIII, Division 1 |
245 | ASME/BPVC 2628-2015 | 2015-07-01 | English | 2628 Use of SB-241/SB-241M Grade 6063 T1 (UNS A96063) Aluminum Alloy Extruded (Integrally) Finned and Coiled Tube in the Manufacture of Hot Water Heating Boilers Section IV |
246 | ASME/BPVC 2656-2015 | 2015-07-01 | English | 2656 Use of Austenitic Stainless Steel on HLW Water Heaters for Potable Water Applications Section IV |
247 | ASME/BPVC 2638-2015 | 2015-07-01 | English | 2638 Alternative Piping Calibration Blocks Section V |
248 | ASME/BPVC 2610-2015 | 2015-07-01 | English | 2610 SA-453, Grade 660, Class C, High Temperature Bolting Materials With Expansion Coefficients Comparable to Austenitic Steels Section VIII, Division 1; Section VIII, Division 2 |
249 | ASME/BPVC 2641-2015 | 2015-07-01 | English | 2641 Titanium Nickel Molybdenum Alloy (Ti 0.8Ni-0.3Mo), Grade C-12 Castings Section VIII, Division 1 |
250 | ASME/BPVC 2632-2015 | 2015-07-01 | English | 2632 Use of UNS N06625 Nickel Alloy (60Ni-22Cr- 9Mo-3.5Cb) Annealed Grade 1 in Welded Tube, Plate, Sheet, and Strip Section I |
251 | ASME/BPVC 2630-2015 | 2015-07-01 | English | 2630 Use of Fatigue Analysis Screening, Method A For Vessels Made of 1.25Cr-0.5Mo-Si and 2.25Cr-1Mo Steels Section VIII, Division 2 |
252 | ASME/BPVC 2621-1-2015 | 2015-07-01 | English | 2621-1 Diffusion Bonding Section VIII, Division 1 |
253 | ASME/BPVC 2633-2015 | 2015-07-01 | English | 2633 Cast ASTM B 752-06 Zirconium Alloy Grades 702C and 705C Section VIII, Division 1 |
254 | ASME/BPVC 2672-2015 | 2015-07-01 | English | 2672 37Ni-33Fe-25Cr Alloy (UNS N08120) Welded Construction Above 1650°F to 1800°F Section VIII, Division 1 |
255 | ASME/BPVC 2674-2015 | 2015-07-01 | English | 2674 Use of SA/EN 10028-2, Grade 13CrMoSi5-5+QT Steels Section VIII, Division 2 |
256 | ASME/BPVC 2629-2015 | 2015-07-01 | English | 2629 Alloy UNS N06690 Up To 1200°F (649°C) Section VIII, Division 1 |
257 | ASME/BPVC 2635-2015 | 2015-07-01 | English | 2635 Single Feedwater Source for Solar Fired Boiler Section I |
258 | ASME/BPVC 2619-2015 | 2015-07-01 | English | 2619 Use of ASTM A 414/A 414M-07 Section VIII, Division 1 |
259 | ASME/BPVC 2620-2-2015 | 2015-07-01 | English | 2620-2 Use of UNS S32101 Ferritic/Austenitic Stainless Steel Plate, Sheet, Strip, Pipe, and Tube in the Manufacture of Part HLW Water Heaters and Storage Tanks Section IV |
260 | ASME/BPVC 2617-2015 | 2015-07-01 | English | 2617 18Cr-15Ni-4Mo-3Cu-N, UNS S31727, Austenitic Stainless Steel Section VIII, Division 1 |
261 | ASME/BPVC 2613-2015 | 2015-07-01 | English | 2613 Phenolic Lining Material in HLW-200 Application Section IV |
262 | ASME/BPVC 2602-1-2015 | 2015-07-01 | English | 2602-1 Dry Film Storage of Digital Radiographic Images Section V |
263 | ASME/BPVC 2616-1-2015 | 2015-07-01 | English | 2616-1 2014-T6 Aluminum Hand Forgings for Nonwelded Construction Section VIII, Division 1 |
264 | ASME/BPVC 2606-2015 | 2015-07-01 | English | 2606 Use of SA-350, Grade LF2, Class 1 Steel Forgings Section I |
265 | ASME/BPVC 2608-2015 | 2015-07-01 | English | 2608 Testing of Vessels Containing an Internal Piston Section VIII, Division 1 |
266 | ASME/BPVC 2618-2015 | 2015-07-01 | English | 2618 Use of SB-148 C95500, As-Cast Temper, in the Manufacture of Heating Boilers, Part HF and Potable-Water Heaters, Part HLW Section IV |
267 | ASME/BPVC 2660-2015 | 2015-07-01 | English | 2660 F-Number Grouping for 57Ni-30Cr-9Fe-1.8Nb Filler Metal (UNS N06043) Section IX |
268 | ASME/BPVC 2671-2015 | 2015-07-01 | English | NFN-24 Up to 1,800°F (982°C) Section II, Part D |
269 | ASME/BPVC 2675-2015 | 2015-07-01 | English | 2675 Use of Noncode Pressure Relief Valves Section VIII, Division 1 |
270 | ASME/BPVC 2604-2015 | 2015-07-01 | English | 2604 Use of Pneumatic Testing on Individual Cast Aluminum Sections Section IV |
271 | ASME/BPVC 2607-2015 | 2015-07-01 | English | 2607 Use of SA-420, Grade WPL6 and Welded Steel Fittings Section I |
272 | ASME/BPVC 2609-2015 | 2015-07-01 | English | 2609 Use of Chromium-Silicon Alloy Steel Wire ASTM A 401/ A 401M-03 UNS G92540 Section VIII, Division 3 |
273 | ASME/BPVC 2611-2015 | 2015-07-01 | English | 2611 Use of SA/EN 10028-3, Grade P355N,1 Fine Grain Normalized Steel Plates Section VIII, Division 2 |
274 | ASME/BPVC 2661-1-2015 | 2015-07-01 | English | 2661-1 Use of SA-723/SA-723M Forgings, SA-705/SA-705M Forgings, and SA-564/SA-564M Bar for Bolting Material and Nuts Section VIII, Division 3 |
275 | ASME/BPVC 2652-1-2015 | 2015-07-01 | English | 2652-1 UNS N06696 Seamless Pipe, Tube, and Plate Section I; Section VIII, Division 1 |
276 | ASME/BPVC 2643-2015 | 2015-07-01 | English | 2643 Use of UNS S32003 Ferritic/Austenitic Stainless Steel Plate, Pipe, and Tube Section IV |
277 | ASME/BPVC 2659-2015 | 2015-07-01 | English | 4.17 When Controlled Bolting Is Used Section VIII, Division 2 |
278 | ASME/BPVC 2668-2015 | 2015-07-01 | English | 2668 Use of SA-268 Grades UNS S43932 and UNS S43940 Conforming to SA-268 in the Manufacture of Coil Type Heating Boilers Section IV |
279 | ASME/BPVC 2665-1-2015 | 2015-07-01 | English | 2665-1 57Ni-22Cr-14W-2Mo-La Alloy (UNS N06230) Section I |
280 | ASME/BPVC 2650-2015 | 2015-07-01 | English | 2650 Fatigue Curves for Nonwelded Parts Having UTS Less Than 90 ksi (620 MPa) Section VIII, Division 3 |
281 | ASME/BPVC 2657-2015 | 2015-07-01 | English | 2657 Tubes Attached by Welding Section IV |
282 | ASME/BPVC 2663-2015 | 2015-07-01 | English | 2663 Use of ASTM A 106/A 106M-08 as SA-106/SA-106M Section I; Section IV; Section VIII, Division 1; Section VIII, Division 2; Section VIII, Division 3; Section XII |
283 | ASME/BPVC 2648-2015 | 2015-07-01 | English | 2648 62Ni-22Mo-15Cr Alloy (UNS N10362) Section VIII, Division 1 |
284 | ASME/BPVC 2640-1-2015 | 2015-07-01 | English | 2640-1 Postponement of Mandatory Date for Compliance Section I |
285 | ASME/BPVC 2658-2015 | 2015-07-01 | English | 2658 Alternative Rules for Appendix 24 When Controlled Bolting Is Used Section VIII, Division 1 |
286 | ASME/BPVC 2649-2015 | 2015-07-01 | English | 15E Group No. 1 Materials Section I |
287 | ASME/BPVC 2636-2015 | 2015-07-01 | English | 2636 ASTM A 240/A 240M-09a UNS S30530 Solution Annealed Austenitic Stainless Steel Plate and Sheet Section VIII, Division 1 |
288 | ASME/BPVC 2655-2015 | 2015-07-01 | English | 2655 Elevated Temperature Design of Bolting Section VIII, Division 2 |
289 | ASME/BPVC 2559-1-2015 | 2015-07-01 | English | 2559-1 Section VIII, Division 2 Components in Boilers Section I |
290 | ASME/BPVC 2554-2015 | 2015-07-01 | English | 2554 Alternative Method to Area Replacement Rules for Openings Under Internal Pressure Section XII |
291 | ASME/BPVC 2546-2015 | 2015-07-01 | English | 2546 Use of SA-240 Grade 904L (UNS N08904) Section IV |
292 | ASME/BPVC 2537-2015 | 2015-07-01 | English | 2537 Alternative Rules for Ellipsoidal or Torispherical Heads Having Integral Backing Strip Attached to Shells Section VIII, Division 1 |
293 | ASME/BPVC 2527-2015 | 2015-07-01 | English | 2527 Pneumatic Testing of Pressure Vessels, U-1(j), UM Vessels Section VIII, Division 1 |
294 | ASME/BPVC 2529-2015 | 2015-07-01 | English | 2529 Drain Valve on Horizontal Helical Coil Watertube Boilers Section IV |
295 | ASME/BPVC 2585-1-2015 | 2015-07-01 | English | 2585-1 23Cr-35Ni-7.5Mo-N, UNS N08354, Austenitic Alloy Section VIII, Division 1 |
296 | ASME/BPVC 2581-2015 | 2015-07-01 | English | 2581 20Cr-25Ni-1.5Mo-Cb-N Seamless Austenitic Stainless Steel Tube Section I |
297 | ASME/BPVC 2563-2015 | 2015-07-01 | English | 2563 Aluminum Alloy, UNS A96061 Temper T6 and UNS A96061 Temper T651 Section VIII, Division 3 |
298 | ASME/BPVC 2598-2015 | 2015-07-01 | English | 2598 22Cr-15Ni-Cb-N Austenitic Stainless Steel Seamless Tubing Section I |
299 | ASME/BPVC 2596-1-2015 | 2015-07-01 | English | 2596-1 Cold-Stretching of Austenitic Stainless Steel Pressure Vessels Section VIII, Division 1 |
300 | ASME/BPVC 2591-2015 | 2015-07-01 | English | 2591 25Cr-20Ni Austenitic Stainless Steel UNS S31002 Section VIII, Division 1 |
301 | ASME/BPVC 2586-1-2015 | 2015-07-01 | English | 2586-1 25Cr-7.5Ni-4.5Mo-Co-N Austenitic-Ferritic Stainless Steel UNS S32707 Section VIII, Division 1 |
302 | ASME/BPVC 2595-2015 | 2015-07-01 | English | 2595 Use of Materials in a Current Code Edition for a Boiler Constructed to an Earlier Code Edition Section I |
303 | ASME/BPVC 2594-1-2015 | 2015-07-01 | English | 2594-1 Use of SA/EN 10028-3 , Grade P460NL1, Fine Grain Normalized Steel Plates Section VIII, Division 2 |
304 | ASME/BPVC 2565-2015 | 2015-07-01 | English | 2565 Mounting Safety and Safety Relief Valves for Coil Type Heating Boilers Section IV |
305 | ASME/BPVC 2590-4-2015 | 2015-07-01 | English | 2590-4 Use of Noncertificate Holders for Welding and Brazing Section VIII, Division 1; Section VIII, Division 2 |
306 | ASME/BPVC 2597-2015 | 2015-07-01 | English | 2597 Permit Testing a Single Forging to Represent Several Thicknesses Section VIII, Division 3 |
307 | ASME/BPVC 2577-2015 | 2015-07-01 | English | 2577 Use of 316L Stainless Steel at Elevated Temperatures Section VIII, Division 1 |
308 | ASME/BPVC 2588-2015 | 2015-07-01 | English | 2588 Ni-Cr-Mo Bolting Material UNS N06059, ASTM F 468-06 Section VIII, Division 1 |
309 | ASME/BPVC 2587-2015 | 2015-07-01 | English | 2587 Alternative Rules for Designing U-Shaped Bellows Section VIII, Division 1 |
310 | ASME/BPVC 2570-2015 | 2015-07-01 | English | 2570 Copper Alloys Section IV |
311 | ASME/BPVC 2576-2015 | 2015-07-01 | English | 2576 Use of ASTM A 672-06 and A 691-98(R2002) Electric- Fusion-Welded Pipe Section I |
312 | ASME/BPVC 2571-1-2015 | 2015-07-01 | English | 2571-1 Use of SA-240, Grades 304L and 316L in Thickness Less Than 1/4 in. (6 mm) Section IV |
313 | ASME/BPVC 2568-2015 | 2015-07-01 | English | 2568 HG-701.1 Permissible Mounting Safety Relief Valves for Coil-Type Boilers Section IV |
314 | ASME/BPVC 2573-2015 | 2015-07-01 | English | 2573 Use of Aluminum Alloy 6063-T6 Conforming to SB-221 in the Manufacture of Heating Boilers Under Part HF Section IV |
315 | ASME/BPVC 2567-2015 | 2015-07-01 | English | 2567 SA-705, Type XM-12, Conditions H1075, H1025, H925, and H900 Forging Materials Section VIII, Division 3 |
316 | ASME/BPVC 2540-2015 | 2015-07-01 | English | 2540 2.5Cr-1Mo-V-B-Ti Material Section I |
317 | ASME/BPVC 2532-4-2015 | 2015-07-01 | English | 2532-4 Titanium Aluminum Vanadium Iron Alloy, Grade 38 (Ti 4Al-2.5V-1.5Fe) UNS R54250 Section VIII, Division 1 |
318 | ASME/BPVC 2545-1-2015 | 2015-07-01 | English | 2545-1 Use of SB-210 Alloys 3003-O and 6061-T6 and SB-241 Alloy 1100-O Tubes for Construction of Heating Boilers Section IV |
319 | ASME/BPVC 2544-2-2015 | 2015-07-01 | English | 2544-2 Tolerance for Formed Heads for External Pressure Design Conditions Section VIII, Division 1 |
320 | ASME/BPVC 2543-2015 | 2015-07-01 | English | 2543 25Cr-6Ni-Mo-N, UNS S32506, Austenitic-Ferritic Duplex Stainless Steel Section VIII, Division 1 |
321 | ASME/BPVC 2538-2015 | 2015-07-01 | English | 2538 Minimum Thickness of Furnace Brazed Plate Heat Exchanger Heads Section VIII, Division 1 |
322 | ASME/BPVC 2547-2015 | 2015-07-01 | English | 2547 Alternatives to Flange Rigidity Requirements, Appendix 2-14 Section VIII, Division 1 |
323 | ASME/BPVC 2556-2-2015 | 2015-07-01 | English | 2556-2 Method for Basing Design Values on Material Properties Affirmed by Material Manufacturers Section I; Section VIII, Division 1; Section VIII, Division 2; Section VIII, Division 3 |
324 | ASME/BPVC 2514-1-2015 | 2015-07-01 | English | 2514-1 Use of SA-182 F22V, SA-336 F22V, SA-541 22V, SA-542 Type D, Class 4a, and SA-832 22V to 850°F (454°C) Section VIII, Division 3 |
325 | ASME/BPVC 2518-2-2015 | 2015-07-01 | English | 2518-2 SB-407 UNS N06811, 42Ni-29Cr-28Fe-Mo-N, Seamless Pipes and Tubes Section I; Section VIII, Division 1 |
326 | ASME/BPVC 2503-1-2015 | 2015-07-01 | English | 2503-1 Use of UNS S32003 Stainless Steel Section VIII, Division 1 |
327 | ASME/BPVC 2516-2015 | 2015-07-01 | English | 2516 Use of Chromium-Silicon Alloy Steel Wire ASTM A 401/A 401M UNS G92540 Section VIII, Division 3 |
328 | ASME/BPVC 2511-2015 | 2015-07-01 | English | 2511 Requirements for Use of an Alternative Test Method Under PG-73.4.2.2 Section I |
329 | ASME/BPVC 2502-2015 | 2015-07-01 | English | 2502 Use of Aluminum Alloy 6063-T5 in the Manufacture of Hot Water Heating Boilers Under Part HF Section IV |
330 | ASME/BPVC 2515-2015 | 2015-07-01 | English | 2515 Use of ASTM A 514-00a Plate Material, All Grades Section VIII, Division 3 |
331 | ASME/BPVC 2501-1-2015 | 2015-07-01 | English | 2501-1 Use of Aluminum Alloy 6063-0 Conforming to SB-241/ SB-241M in the Manufacture of Hot Water Boilers Under Part HF Section IV |
332 | ASME/BPVC 2507-2015 | 2015-07-01 | English | 2507 Minimum Thickness of Dimpled or Embossed Assemblies Per Appendix 17 Section VIII, Division 1 |
333 | ASME/BPVC 2500-2015 | 2015-07-01 | English | 2500 Use of ASTM A 576 Hot-Wrought Carbon Steel Bars for Forming Fittings for HLW Construction Section IV |
334 | ASME/BPVC 2493-2015 | 2015-07-01 | English | 2493 Parallel Plate Explosion Welding for Butt Joints Between Dissimilar Metals Section IX |
335 | ASME/BPVC 2496-3-2015 | 2015-07-01 | English | 2496-3 27Cr-7.6Ni-1Mo-2.3W-N UNS S32808, Solution Annealed Austenitic-Ferritic Duplex Stainless Steel Plate, Seamless Tubing, Seamless Pipe, Forgings, and Bar Section VIII, Division 1; Section VIII, Division 2 |
336 | ASME/BPVC 2481-2015 | 2015-07-01 | English | 2481 Ni-29Cr-3.5Fe-3.3Al-1.5Nb Alloy (UNS N06693) Section VIII, Division 1 |
337 | ASME/BPVC 2430-2015 | 2015-07-01 | English | 2430 Use of A 213/A 213M-04 UNS S31060 Austenitic Stainless Steel Seamless Tubing and A 240/A 240M-04aε1 UNS S31060 Austenitic Stainless Steel Plate Section I; Section VIII, Division 1 |
338 | ASME/BPVC 2440-2015 | 2015-07-01 | English | 2440 Use of Mn-1/2Mo-1/2Ni (UNS K12039) Pipe Section I |
339 | ASME/BPVC 2494-1-2015 | 2015-07-01 | English | 2494-1 Corrosion-Resistant Cu-Sb Carbon Steel Tube Section I |
340 | ASME/BPVC 2445-2-2015 | 2015-07-01 | English | 2445-2 23Cr-25Ni-5.5Mo-N, UNS S32053, Austenitic -Stainless Steel Section VIII, Division 1 |
341 | ASME/BPVC 2451-1-2015 | 2015-07-01 | English | 2451-1 Steel Plates Produced by Thermomechanical Control Process (TMCP) Section VIII, Division 3 |
342 | ASME/BPVC 2476-2015 | 2015-07-01 | English | 2476 Radiography Using Phosphor Imaging Plate Section V |
343 | ASME/BPVC 2469-1-2015 | 2015-07-01 | English | 2469-1 Pneumatic Testing Section IV |
344 | ASME/BPVC 2432-1-2015 | 2015-07-01 | English | 2432-1 Use of 5052-H32, 6061-T6, and 6061-T651 Temper Aluminum Alloys in Part HF of Section IV, for Construction of Heating Boilers Section IV; Section II, Part B |
345 | ASME/BPVC 2450-2015 | 2015-07-01 | English | 2450 Use of UNS S38815 Stainless Steel to 800°F (427°C) Section VIII, Division 1 |
346 | ASME/BPVC 2446-2015 | 2015-07-01 | English | 2446 Pilot-Operated Pressure Relief Valves for PG-67.2.6 Applications Section I |
347 | ASME/BPVC 2421-2015 | 2015-07-01 | English | 2421 Single Fillet Lap Joint for Heat Exchanger Tube Welds Section VIII, Division 1 |
348 | ASME/BPVC 2427-2015 | 2015-07-01 | English | 2427 Chromium-Nickel-Molybdenum-Nitrogen-Tungsten Duplex Stainless Steel UNS S39274 Plate Section VIII, Division 1 |
349 | ASME/BPVC 2426-2015 | 2015-07-01 | English | 2426 Titanium Nickel-Molybdenum Ruthenium Alloy, Ti-0.8Ni-0.3Mo-0.1Ru Section VIII, Division 1 |
350 | ASME/BPVC 2424-1-2015 | 2015-07-01 | English | 2424-1 Alternative Attachment Details for Welded Stayed Construction Using Dimpled or Embossed Plate Section VIII, Division 1 |
351 | ASME/BPVC 2489-2015 | 2015-07-01 | English | 2489 Use of SA-508 Class 1, Grades 2 and 3 Forgings Section I |
352 | ASME/BPVC 2498-2015 | 2015-07-01 | English | 2498 Use of SA/EN 10028-2, Grades P235GH and P265GH Steel Section VIII, Division 1 |
353 | ASME/BPVC 2483-2015 | 2015-07-01 | English | 2483 Use of Aluminum Alloy EN AC-AlSi7Mg Sand Castings in F Temper Condition Meeting All Requirements of BS EN1706 1998 Section IV |
354 | ASME/BPVC 2485-2015 | 2015-07-01 | English | 2485 Steam Drum in Heat Recovery Steam Generator System Section I |
355 | ASME/BPVC 2428-3-2015 | 2015-07-01 | English | 2428-3 Attachment of Tubes to Flat Tubesheets Using Complete Penetration Welds Section VIII, Division 1 |
356 | ASME/BPVC 2463-1-2015 | 2015-07-01 | English | 2463-1 Welding of Tubes to Tubesheets by Deformation Resistance Welding (DRW) Process Section VIII, Division 1 |
357 | ASME/BPVC 2437-1-2015 | 2015-07-01 | English | 2437-1 Rules for Diffusion Bonded, Flat Plate, Microchannel Heat Exchanger Section VIII, Division 1 |
358 | ASME/BPVC 2468-1-2015 | 2015-07-01 | English | 2468-1 Use of Nickel-Chromium-Molybdenum-Columbium Alloy UNS N06625 Section VIII, Division 2 |
359 | ASME/BPVC SEC XI INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION XI |
360 | ASME/BPVC SEC X INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION X |
361 | ASME/BPVC SEC IX INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION IX |
362 | ASME/BPVC SEC VIII-3 INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION VIII-3 |
363 | ASME/BPVC SEC VIII-2 INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION VIII-2 |
364 | ASME/BPVC SEC VIII-1 INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION VIII-1 |
365 | ASME/BPVC SEC V INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION V |
366 | ASME/BPVC SEC IV INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION IV |
367 | ASME/BPVC SEC III NCA INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION III NCA |
368 | ASME/BPVC SEC III-5 INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION III-5 |
369 | ASME/BPVC SEC II-D-M INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION II-D (METRIC) |
370 | ASME/BPVC SEC II-D-C INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION II-D (CUSTOMARY) |
371 | ASME/BPVC SEC II-A INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION II-A |
372 | ASME/BPVC SEC I INT VOL 63-2015 | 2015-07-01 | English | INTERPRETATIONS VOLUME 63 - SECTION I |
373 | ASME STP-PT-075-2015 | 2015-06-30 | English | Effect of Thickness on the Transformation Behavior of Grade 91 Steel |
374 | ASME STP-NU-061-1-2015 | 2015-06-30 | English | COMPREHENSIVE EVALUATION OF THE NSQ-100 NUCLEAR SAFETY AND QUALITY MANAGEMENT SYSTEM REQUIREMENTS |
375 | ASME STP-NU-062-1-2015 | 2015-06-30 | English | COMPREHENSIVE COMPARISON OF INTERNATIONAL QUALITY STANDARDS |
376 | ASME PTB-10-2015 | 2015-06-30 | English | Guide for ASME Section VIII Division 1 Stamp Holders |
377 | ASME STP-PT-074-2015 | 2015-06-26 | English | Local Stresses in Nozzles in Shells and Formed Heads from External Loads |
378 | ASME STP-PT-076-2015 | 2015-06-26 | English | HANDLING OF DIFFERENCES IN YS, UTS, AND CREEP RUPTURE STRENGTH BETWEEN ASME AND OTHER STANDARDS (EN, AS, ETC.) |
379 | ASME B30.1-2015 | 2015-05-29 | English | Jacks, Industrial Rollers, Air Casters, and Hydraulic Gantries |
380 | ASME/BPVC SEC VIII-1 ERRATA-2015 | 2015-05-04 | English | ERRATA for SECTION VIII DIVISION 1 RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-733; 11-1274; 11-1676; 11-1680; 11-2242; 12-694; 12-1286; 12-1736; 13-958; 13-1345; 13-1750; 14-258; 14-413; 14-736; 14-1303; 14-1750; 14-2385; 15-768 |
381 | ASME/BPVC BPVC-CC-BPV ERRATA-2015 | 2015-05-04 | English | ERRATA for BPVC CODE CASES: BOILERS AND PRESSURE VESSELS - INCLUDES ERRATA: 12-1304; 14-1303; 14-1388; 15-768 |
382 | ASME/BPVC CC-NC ERRATA-2015 | 2015-04-07 | English | ERRATA for CODE CASES: NUCLEAR COMPONENTS - INCLUDES ERRATA: 11-1368; 11-1996; 11-2129; 12-420; 12-1311; 12-1582; 12-2110; 13-332; 13-1249; 13-2127; 13-1738; 14-776; 14-1077; 13-1035; 14-1395; 14-1563; 14-1564; 14-2304; 14-2194; 14-2215 |
383 | ASME/BPVC SEC III-1 NF ERRATA-2015 | 2015-03-02 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NF SUPPORTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-1436; 10-870; 12-1312; 12-1575; 13-816; 14-2229; 13-1953 |
384 | ASME/BPVC SEC III-1 APPENDICES ERRATA-2015 | 2015-03-02 | English | ERRATA for SECTION III DIVISION 1 - APPENDICES RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-1436; 10-870; 11-2129; 12-2114; 13-1853; 13-1943; 14-322; 14-325; 14-1533; 14-778; 14-1564; 14-1085; 15-70; 14-1660 |
385 | ASME A90.1-2015 | 2015-02-27 | English | Safety Standard for Belt Manlifts |
386 | ASME NOG-1-2015 | 2015-02-20 | English | Rules for Construction of Overhead and Gantry Cranes (Top Running Bridge, Multiple Girder) |
387 | ASME A17.4-2015 | 2015-02-20 | English | Guide for Emergency Personnel (Includes Evacuation Procedures and Firefighters´ Service Operating Procedures) |
388 | ASME/BPVC SEC III-1 NB ERRATA-2015 | 2015-02-09 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NB CLASS 1 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-2129; 12-1313; 12-989; 12-1706; 12-2111; 12-2298; 13-212; 13-1943; 13-1994; 14-1224; 14-1562; 14-768; 14-1700 |
389 | ASME/BPVC SEC III-1 NC ERRATA-2015 | 2015-02-06 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NC CLASS 2 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-870; 12-1310; 12-1313; 12-989; 13-1034; 13-1943; 14-1172; 14-1224; 14-1533; 14-1551; 14-1554; 14-1561; 14-2229 |
390 | ASME/BPVC SEC III-1 NG ERRATA-2015 | 2015-02-06 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NG CORE SUPPORT STRUCTURES RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-1351; 13-1944; 14-2229 |
391 | ASME/BPVC SEC II-A ERRATA-2015 | 2015-02-04 | English | ERRATA for SECTION II A FERROUS MATERIAL SPECIFICATIONS MATERIALS - INCLUDES ERRATA: 10-479; 11-1753; 11-1219; 13-1741; 13-1806; 14-1759; 14-2064; 14-2451 |
392 | ASME/BPVC SEC I ERRATA-2015 | 2015-02-03 | English | ERRATA for SECTION I RULES FOR CONSTRUCTION OF POWER BOILERS - INCLUDES ERRATA: 11-425; 11-1457; 11-1757; 11-1978; 12-624; 12-473; 12-1193; 12-1049; 12-775; 13-1199; 14-424; 14-2465 |
393 | ASME/BPVC SEC III-5 ERRATA-2015 | 2015-02-03 | English | SECTION III DIVISION 5 HIGH TEMPERATURE REACTORS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 12-1309; 12-1314; 13-1885; 14-1174 |
394 | ASME/BPVC SEC XI ERRATA-2015 | 2015-02-03 | English | ERRATA for SECTION XI RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS - INCLUDES ERRATA: 11-1368; 11-1996; 12-420; 12-918; 12-919; 12-2013; 12-2120; 11-304; 11-305; 13-333; 13-714; 13-1249; 14-320; 14-776; 13-2077; 14-1395; 14-1418; 14-19 |
395 | ASME ANS RA-S-1.2-2015 | 2015-01-05 | English | Severe Accident Progression and Radiological Release (Level 2) PRA Standard for Nuclear Power Plant Applications for Light Water Reactors (LWRs) |
396 | ASME 14414-2015 | 2015-01-01 | English | Pump system energy assessment |
397 | ASME B30.17-2015 | 2015-01-01 | English | Cranes and Monorails (With Underhung Trolley or Bridge) Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings |
398 | ASME/BPVC CASE N-491-2-2015 | 2015-01-01 | English | N-491-2 Alternative Rules for Examination of Class 1, 2, 3, and MC Component Supports of Light-Water Cooled Power Plants Section XI, Division 1 ANNULLED SUPP 1 |
399 | ASME/BPVC CASE N-789-2-2015 | 2015-01-01 | English | N-789-2 Alternative Requirements for Pad Reinforcement of Class 2 and 3 Moderate-Energy Carbon Steel Piping for Raw Water Service Section XI, Division 1 SUPP 2 |
400 | ASME/BPVC CASE N-806-2015 | 2015-01-01 | English | N-806 Evaluation of Metal Loss in Class 2 and 3 Metallic Piping Buried in a Back-Filled Trench Section XI, Division 1 ERRATA SUPP 1 |
401 | ASME OM CODE CASES-2015 | 2015-01-01 | English | Code Cases to OM CODE Code for Operation and Maintenance of Nuclear Power Plants |
402 | ASME/BPVC CODE CASES: BPV SUPPLEMENT 1-2015 | 2015-01-01 | English | CODE CASES: BOILERS AND PRESSURE VESSELS - SUPPLEMENT 1 SUMMARY OF CHANGES |
403 | ASME/BPVC CODE CASES: NUC SUPPLEMENT 1-2015 | 2015-01-01 | English | CODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 1 |
404 | ASME/BPVC CODE CASES: NUC SUPPLEMENT 2-2015 | 2015-01-01 | English | CODE CASES: NUCLEAR COMPONENTS SUPPLEMENT 2 |
405 | ASME PTC 12.1-2015 | 2015-01-01 | English | Closed Feedwater Heaters |
406 | ASME PTC 46-2015 | 2015-01-01 | English | Overall Plant Performance |
407 | ASME/BPVC 2199-7-2015 | 2015-01-01 | English | 2199-7 2.25Cr-1.6W-V-Cb Material Section I SUPP 2 |
408 | ASME A112.4.2-2015 | 2015-01-01 | English | Personal hygiene devices for water closets |
409 | ASME/BPVC 2361-2015 | 2015-01-01 | English | 2361 Alternative Stresses That May Be Used in the Equation in UG-101(k) for Calculating the Maximum Allowable Working Pressure at Design Temperature Section VIII, Division 1 ANNULLED SUPP 1 |
410 | ASME/BPVC 2822-2015 | 2015-01-01 | English | 2822 Fatigue Evaluation for SA-182 F91, SA-213 T91, SA-335 P91, SA-387 91 Class 2, and SA-336 F91 at Temperatures Greater Than 371°C (700°F) and Less Than or Equal to 500°C (932°F) Section VIII, Division 2 SUPP 1 |
411 | ASME A112.18.2-2015 | 2015-01-01 | English | Plumbing waste fittings |
412 | ASME A112.1002-2015 | 2015-01-01 | English | Anti-siphon fill valves for water closet tanks |
413 | ASME A112.1070-2015 | 2015-01-01 | English | Performance requirements for water temperature limiting devices |
414 | ASME A112.1002-2015 | 2015-01-01 | English | Anti-siphon fill valves for water closet tanks - Update No. 1: September 2017 |
415 | ASME A112.1037-2015 | 2015-01-01 | English | Performance requirements for pressurized flushing devices for plumbing fixtures - Update No. 1: September 2017 |
416 | ASME A112.1070-2015 | 2015-01-01 | English | Performance requirements for water temperature limiting devices - Update No. 1: September 2017 |
417 | ASME B31T-2015 | 2015-01-01 | English | Standard Toughness Requirements for Piping |
418 | ASME PTC 22-2014 | 2014-12-31 | English | Performance Test Code on Gas Turbines |
419 | ASME B30.5 SPANISH-2014 | 2014-12-31 | Spanish | Grúas Ferroviarias y Móviles |
420 | ASME B89.7.2-2014 | 2014-12-29 | English | Dimensional Measurement Planning |
421 | ASME STP-PT-073-2014 | 2014-12-24 | English | STRESS INTENSITY FACTOR AND K-FACTOR ALIGNMENT FOR METALLIC PIPES |
422 | ASME/BPVC SEC V ERRATA-2014 | 2014-12-10 | English | ERRATA for SECTION V NONDESTRUCTIVE EXAMINATION - INCLUDES ERRATA: 10-1042; 10-1048; 11-1353; 13-1765; 13-1766; 13-1767; 14-592; 14-2345 |
423 | ASME/BPVC SEC IX ERRATA-2014 | 2014-12-04 | English | ERRATA for SECTION IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS WELDING AND BRAZING QUALIFICATIONS - INCLUDES ERRATA: 11-729; 11-1697; 11-130; 11-2201; 12-404; 12-1305; 12-1506; 12-2090; |
424 | ASME/BPVC SEC VIII-3 ERRATA-2014 | 2014-12-04 | English | ERRATA for SECTION VIII DIVISION 3 ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-589; 11-1274; 11-1678; 11-2242; 12-694; 12-1286; 12-1736; 13-1750; 14-413; 14-1303; 14-1750 |
425 | ASME PTB-9-2014 | 2014-11-19 | English | ASME Pipeline Standards Compendium |
426 | ASME B18.31.2-2014 | 2014-10-29 | English | Continuous Thread Stud, Double-End Stud, and Flange Bolting Stud (Stud Bolt) (Inch Series) |
427 | "cart">ASME/BPVC SEC III-1 NB ERRATA-2014 | 2014-10-13 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NB CLASS 1 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-2129; 12-1313; 12-989; 12-1706; 12-2111; 12-2298; 13-212; 13-1943; 13-1994; 14-1224; 14-1562 |
428 | "cart">ASME/BPVC SEC III-1 APPENDICES ERRATA-2014 | 2014-10-13 | English | ERRATA for SECTION III DIVISION 1 - APPENDICES RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 11-1436; 10-870; 11-2129; 12-2114; 13-1853; 13-1943; 14-322; 14-325; 14-1533 |
429 | "cart">ASME/BPVC SEC III NCA ERRATA-2014 | 2014-10-13 | English | ERRATA for SECTION III SUBSECTION NCA GENERAL REQUIREMENTS FOR DIVISION 1 AND DIVISION 2 RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-1351; 12-857; 12-1797; 13-2161; 14-1075; 14-1556 |
430 | "cart">ASME/BPVC SEC III-3 ERRATA-2014 | 2014-10-13 | English | ERRATA FOR SECTION III DIVISION 3 CONTAINMENTS FOR TRANSPORTATION AND STORAGE OF SPENT NUCLEAR FUEL AND HIGH LEVEL RADIOACTIVE MATERIAL AND WASTE RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 12-1994; 13-140; 13-1270; 13 |
431 | "cart">ASME/BPVC SEC III-1 NE ERRATA-2014 | 2014-10-13 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NE CLASS MC COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-870; 11-2129; 12-1558; 12-1583; 13-144; 14-932; 14-933; 14-1558 |
432 | "cart">ASME/BPVC SEC III-1 ND ERRATA-2014 | 2014-10-13 | English | ERRATA FOR SECTION III DIVISION 1 - SUBSECTION ND CLASS 3 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 12-1266; 12-1313; 12-989; 12-2111; 13-1033; 13-1943; 14-1533; 14-1551 |
433 | "cart">ASME/BPVC SEC III-1 NC ERRATA-2014 | 2014-10-13 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NC CLASS 2 COMPONENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-870; 12-1310; 12-1313; 12-989; 13-1034; 13-1943; 14-1172; 14-1224; 14-1533; 14-1551; 14-1554; 14-1561 |
434 | "cart">ASME/BPVC CC-NC ERRATA-2014 | 2014-10-13 | English | ERRATA for CODE CASES: NUCLEAR COMPONENTS - INCLUDES ERRATA: 11-1368; 11-1996; 11-2129; 12-420; 12-1311; 12-1582; 12-2110; 13-332; 13-1249; 13-2127; 13-1738; 14-776; 14-1077; 13-1035 |
435 | ASME BPE-2014 | 2014-10-10 | English | Bioprocessing Equipment |
436 | ASME B30.14 INTERPRETATIONS-2014 | 2014-10-09 | English | Interpretations to B30.14 Side Boom Tractors - Includes Interpretations No. 1 through 15 |
437 | ASME/BPVC SEC VIII-2 SPECIAL NOTICE-2014 | 2014-10-03 | English | SPECIAL NOTICE for SECTION VIII DIVISION 2 ALTERNATIVE RULES RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES SPECIAL NOTICE: 14-1869 |
438 | ASME B30.8 INTERPRETATIONS-2014 | 2014-10-01 | English | Interpretations to B30.8-1993 Floating Cranes and Floating Derricks |
439 | ASME B31.8-2014 | 2014-09-30 | English | Gas Transmission and Distribution Piping Systems |
440 | ASME B31.8S-2014 | 2014-09-30 | English | Managing System Integrity of Gas Pipelines - Supplement to ASME B31.8 |
441 | "cart">ASME/BPVC SEC VIII-3 ERRATA-2014 | 2014-09-23 | English | ERRATA for SECTION VIII DIVISION 3 ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-589; 11-1274; 11-1678; 11-2242; 12-694; 12-1286; 12-1736; 13-1750; 14-413; 14-1303 |
442 | "cart">ASME/BPVC SEC VIII-1 ERRATA-2014 | 2014-09-23 | English | ERRATA for SECTION VIII DIVISION 1 RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-733; 11-1274; 11-1676; 11-1680; 11-2242; 12-694; 12-1286; 12-1736; 13-958; 13-1345; 13-1750; 14-258; 14-413; 14-736; 14-1303 |
443 | "cart">ASME/BPVC SEC VIII-2 ERRATA-2014 | 2014-09-23 | English | ERRATA for SECTION VIII DIVISION 2 ALTERNATIVE RULES RULES FOR CONSTRUCTION OF PRESSURE VESSELS - INCLUDES ERRATA: 11-470; 11-1274; 11-1677; 11-1680; 11-2242; 12-694; 12-1286; 12-1736; 13-326; 13-958; 13-1345; 13-1750; 14-413; 14-736; 14-1303 |
444 | "cart">ASME/BPVC SEC IX ERRATA-2014 | 2014-09-23 | English | ERRATA for SECTION IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS WELDING AND BRAZING QUALIFICATIONS - INCLUDES ERRATA: 11-729; 11-1697; 11-130; 11-2201; 12-404; 12-1305; 12-1506; |
445 | "cart">ASME/BPVC BPVC-CC-BPV ERRATA-2014 | 2014-09-23 | English | ERRATA for BPVC CODE CASES: BOILERS AND PRESSURE VESSELS - INCLUDES ERRATAS: 12-1304; 14-1303 |
446 | "cart">ASME/BPVC SEC II-A ERRATA-2014 | 2014-09-22 | English | ERRATA for SECTION II A FERROUS MATERIAL SPECIFICATIONS MATERIALS - INCLUDES ERRATA: 10-479; 11-1753; 11-1219; 13-1741; 13-1806; 14-1759 |
447 | "cart">ASME/BPVC SEC III-2 ERRATA-2014 | 2014-09-22 | English | ERRATA for SECTION III DIVISION 2 CODE FOR CONCRETE CONTAINMENTS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 04-427; 09-1896; 10-634; 12-1797; 12-1868; 11-1551; 14-885; 14-1001 |
448 | ASME HST-2-2014 | 2014-09-16 | English | Performance Standard for Hand Chain Manually Operated Chain Hoists |
449 | ASME A18.1-2014 | 2014-09-12 | English | Safety Standard for Platform Lifts and Stairway Chairlifts |
450 | ASME PTB-8-2014 | 2014-09-12 | English | PROCUREMENT GUIDELINES FOR METALLIC MATERIALS |
451 | ASME STP-PT-071-2014 | 2014-09-02 | English | STRESS INTENSITY FACTOR SOLUTIONS FOR INTERNAL CRACKS IN THICK-WALLED CYLINDER VESSELS |
452 | ASME Y14.35-2014 | 2014-08-29 | English | Revision of Engineering Drawings and Associated Documents |
453 | ASME B31.1-2014 | 2014-08-15 | English | Power Piping - Includes Interpretations No: 47 |
454 | "cart">ASME/BPVC SEC I ERRATA-2014 | 2014-07-24 | English | ERRATA for SECTION I RULES FOR CONSTRUCTION OF POWER BOILERS - INCLUDES ERRATA: 11-425; 11-1457; 11-1757; 11-1978; 12-624; 12-473; 12-1193; 12-1049; 12-775; 13-1199; 14-424 |
455 | ASME HST-5-2014 | 2014-07-11 | English | Performance Standard for Air Chain Hoists |
456 | ASME B31Q-2014 | 2014-06-30 | English | Pipeline Personnel Qualification |
457 | ASME STP-NU-072-2014 | 2014-06-27 | English | SMALL MODULAR REACTOR (SMR) ROADMAP |
458 | ASME STP-PT-070-2014 | 2014-06-20 | English | DESIGN GUIDELINES FOR THE EFFECTS OF CREEP, FATIGUE & CREEP-FATIGUE INTERACTION WITH DESIGN-BY-ANALYSIS AND NONDESTRUCTIVE INSPECTION ACCEPTANCE CRITERIA |
459 | ASME PTC 25-2014 | 2014-06-17 | English | Pressure Relief Devices |
460 | ASME PTB-7-2014 | 2014-06-16 | English | CRITERIA FOR SHELL-AND-TUBE HEAT EXCHANGERS ACCORDING TO PART UHX OF ASME SECTION VIII DIVISION 1 |
461 | ASME B30.26 INTERPRETATIONS-2014 | 2014-06-01 | English | Interpretations for ASME B30.26 - Rigging Hardware Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings - Include Interpretations June 2010 Through June 2014 |
462 | ASME B30.21-2014 | 2014-05-30 | English | Lever Hoists Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings |
463 | ASME PTB-1-2014 | 2014-05-27 | English | Section VIII – Division 2 Criteria and Commentary |
464 | "cart">ASME/BPVC SEC XI ERRATA-2014 | 2014-05-23 | English | ERRATA for SECTION XI RULES FOR INSERVICE INSPECTION OF NUCLEAR POWER PLANT COMPONENTS - INCLUDES ERRATA: 11-1368; 11-1996; 12-420; 12-918; 12-919; 12-2013; 12-2120; 11-304; 11-305; 13-333; 13-714; 13-1249; 14-320; 14-776 |
465 | ASME B18.16.6-2014 | 2014-04-30 | English | Prevailing Torque Locknuts (Inch Series) |
466 | ASME B31.9-2014 | 2014-04-28 | English | Building Services Piping |
467 | ASME P30-1-2014 | 2014-03-31 | English | Planning for Load Handling Activities |
468 | ASME STP-PT-066-2014 | 2014-03-26 | English | DESIGN GUIDELINES FOR CORROSION, EROSION AND STEAM OXIDATION OF BOILER TUBES IN PULVERIZED COAL-FIRED BOILERS |
469 | ASME B30.27-2014 | 2014-03-26 | English | Material Placement Systems Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings |
470 | ASME STP-NU-068-2014 | 2014-03-14 | English | CORROSION OF A193 GRADE B7 BOLT MATERIAL IN BWR SODIUM PENTABORATE SOLUTIONS |
471 | ASME STP-NU-069-2014 | 2014-03-14 | English | ANALYSIS OF SELECTED NONDESTRUCTIVE EXAMINATION (NDE) METHODOLOGIES FOR THE ASSESSMENT OF CRACKING IN CONCRETE CONTAINMENTS |
472 | ASME MFC-16-2014 | 2014-03-14 | English | Measurement of Liquid Flow in Closed Conduits With Electromagnetic Flowmeters |
473 | ASME RT-2-2014 | 2014-03-12 | English | Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles |
474 | ASME STP-NU-067-2014 | 2014-03-11 | English | ROADMAP FOR THE DEVELOPMENT OF ASME CODE RULES FOR FUSION ENERGY DEVICES |
475 | ASME B89.1.2M ERRATA-2014 | 2014-02-21 | English | Calibration of Gage Blocks by Contact Comparison Methods (Through 20 in. and 500 mm) - INCLUDES ERRATA: 14-390 |
476 | "cart">ASME/BPVC SEC V ERRATA-2014 | 2014-01-08 | English | ERRATA for SECTION V NONDESTRUCTIVE EXAMINATION - INCLUDES ERRATA: 10-1042; 10-1048; 11-1353; 13-1765; 13-1766; 13-1767 |
477 | ASME MFC-1-2014 | 2014-01-01 | English | Glossary of Terms Used in the Measurement of Fluid Flow in Pipes |
478 | ASME POM 102-2014 | 2014-01-01 | English | Operating Walkdowns of Power Plants |
479 | ASME B5.60-2014 | 2014-01-01 | English | Workholding Chucks: Jaw-Type Chucks |
480 | ASME B31.3 CODE CASES-2014 | 2014-01-01 | English | Code Cases to B31.3 Process Piping |
481 | ASME B18.8.1-2014 | 2014-01-01 | English | Clevis Pins and Cotter Pins (Inch Series) |
482 | ASME A112.19.12-2014 | 2014-01-01 | English | Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drain Waste Systems |
483 | ASME A120.1-2014 | 2014-01-01 | English | Safety Requirements for Powered Platforms and Traveling Ladders and Gantries for Building Maintenance |
484 | ASME CA-1-2014 | 2014-01-01 | English | Conformity Assessment Requirements |
485 | ASME B18.31.3-2014 | 2014-01-01 | English | Threaded Rods (Inch Series) |
486 | ASME Y14.2-2014 | 2014-01-01 | English | Line Conventions and Lettering |
487 | ASME 58.22-2014 | 2014-01-01 | English | Requirements for Low Power and Shutdown Probabilistic Risk Assessment |
488 | ASME B30.10-2014 | 2014-01-01 | English | Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings |
489 | ASME B31.1 INTERPRETATIONS-2013 | 2013-12-31 | English | Interpretations to B31.1 Power Piping - Includes Interpretations No. 2 through 6, 8 through 10, 13, 15, 17 through 25, 27 through 31, and 42 through 47 |
490 | ASME PDS-1.1-2013 | 2013-12-31 | English | Dimensioning, Tolerancing, Surface Texture, and Metrology Standards — Rules for Drawings With Incomplete Reference to Applicable Drawing Standard |
491 | ASME STP-PT-065-2013 | 2013-12-19 | English | BRANCH LEG STUDY FOR BIOPROCESSING EQUIPMENT |
492 | ASME B31.3 INTERPRETATIONS-2013 | 2013-12-16 | English | INTERPRETATIONS to B31.3 - 2010 Process Piping - Includes Interpretations No. 1 Through 24 |
493 | ASME ANS RA-S-1.4-2013 | 2013-12-09 | English | Probabilistic Risk Assessment Standard for Advanced Non-LWR Nuclear Power Plants |
494 | ASME B16.15-2013 | 2013-12-06 | English | Cast Copper Alloy Threaded Fittings Classes 125 and 250 |
495 | ASME B16.51-2013 | 2013-12-06 | English | Copper and Copper Alloy Press-Connect Pressure Fittings |
496 | ASME AG-1 INTERPRETATIONS-2013 | 2013-12-03 | English | INTERPRETATIONS TO ASME AG-1 - Includes Interpretations June 2012 Through December 2013 |
497 | ASME RTP-1-2013 | 2013-11-26 | English | Reinforced Thermoset Plastic Corrosion-Resistant Equipment |
498 | "cart">ASME/BPVC SEC III-5 ERRATA-2013 | 2013-11-25 | English | SECTION III DIVISION 5 HIGH TEMPERATURE REACTORS RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATAS: 12-1309; 12-1314; 13-1885 |
499 | "cart">ASME/BPVC SEC III-1 NG ERRATA-2013 | 2013-11-25 | English | ERRATA for SECTION III DIVISION 1 - SUBSECTION NG CORE SUPPORT STRUCTURES RULES FOR CONSTRUCTION OF NUCLEAR FACILITY COMPONENTS - INCLUDES ERRATA: 10-1351; 13-1944 |
500 | ASME B29.26-2013 | 2013-11-20 | English | Fatigue Testing Power Transmission Roller Chain |
|