| Pos | standard Number | publication date | Language | Description |
| 1 | AFNOR NF EN 50272-2-2005 | 2005-12-01 | French | Safety requirements for secondary batteries and battery installations - Part 2 : Stationary batteries |
| 2 | AFNOR NF EN 2087-2005 | 2005-12-01 | French | Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Clad sheet and strip - 0,4 mm < or = a < or = 6 mm |
| 3 | AFNOR NF ISO 7867-2-2005 | 2005-12-01 | French | Tyres and rims (metric series) for agricultural tractors and machines - Part 2 : service description and load ratings - Modified by NF ISO 7867-2/A1:201007 (U12-005-2/A1) |
| 4 | AFNOR NF EN 60384-14-2005 | 2005-12-01 | French | Fixed capacitors for use in electronic equipment - Part 14 : sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| 5 | AFNOR NF ISO 8178-9/A1-2005 | 2005-12-01 | French | Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 : test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions |
| 6 | AFNOR NF EN ISO 16103-2005 | 2005-12-01 | French | Packaging - Transport packages for dangerous goods - Recycled plastics material |
| 7 | AFNOR NF ISO 7867-1-2005 | 2005-12-01 | French | Tyres and rims (metric series) for agricultural tractors and machines - Part 1 : tyre designation, dimensions, marking and tyre/rim coordination |
| 8 | AFNOR XP CEN/TS 15122-2005 | 2005-12-01 | French | Surfaces for sports areas - Determination of resistance of synthetic sports surfaces to repeated impact |
| 9 | AFNOR NF EN 14902-2005 | 2005-12-01 | French | Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter |
| 10 | AFNOR NF EN 12791-2005 | 2005-12-01 | French | Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2) |
| 11 | AFNOR NF EN 898-2005 | 2005-12-01 | French | Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate |
| 12 | AFNOR NF EN 14952-2005 | 2005-12-01 | French | Surfaces for sports areas - Determination of water absorption of unbound minerals |
| 13 | AFNOR NF EN 14953-2005 | 2005-12-01 | French | Surfaces for sports areas - Determination of thickness of unbound mineral surfaces for outdoor sports areas |
| 14 | AFNOR NF EN 14954-2005 | 2005-12-01 | French | Surfaces for sports areas - Determination of hardness of natural turf and unbound mineral surfaces for outdoor sports areas |
| 15 | AFNOR NF EN ISO 11432-2005 | 2005-12-01 | French | Building construction - Sealants - Determination of resistance to compression |
| 16 | AFNOR NF EN 492/A1-2005 | 2005-12-01 | French | Fibre-cement slates and fittings - Product specification and test methods |
| 17 | AFNOR NF EN 4408-006-2005 | 2005-12-01 | French | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 6 : preforms |
| 18 | AFNOR NF EN ISO 1969-2005 | 2005-12-01 | French | Fibre ropes - Polyethylene - 3 and 4 strand ropes |
| 19 | AFNOR UTE C93-527-9-2005 | 2005-12-01 | French | Telecommunications local networks cables with polyolefin insulation and polyolefin sheath - Series 92 and 5-10 |
| 20 | AFNOR NF EN 50260-1-2005 | 2005-12-01 | French | Safety of hand-held battery-powered motor-operated tools and battery packs - Part 1 : general requirements |
| 21 | AFNOR NF EN 4408-002-2005 | 2005-12-01 | French | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 2 : laminated parts |
| 22 | AFNOR NF ISO 4306-5-2005 | 2005-12-01 | French | Cranes - Vocabulary - Part 5 : bridge and gantry cranes |
| 23 | AFNOR UTE C93-527-10-2005 | 2005-12-01 | French | Telecommunications local networks cables with polyolefin insulation and polyolefin sheath - Serie 5-10 E |
| 24 | AFNOR NF EN 60317-12/A2-2005 | 2005-12-01 | French | Specifications for particular types of winding wires - Part 12 : polyvinyl acetal enamelled round copper wire, class 120 |
| 25 | AFNOR NF ISO 1703-2005 | 2005-12-01 | French | Assembly tools for screws and nuts - Designation and Nomenclature |
| 26 | AFNOR NF ISO 1701-2-2005 | 2005-12-01 | French | Test conditions for milling machines with table of variable height - Testing of accuracy - Part 2 : machines with vertical spindle |
| 27 | AFNOR NF ISO 1701-1-2005 | 2005-12-01 | French | Test conditions for milling machines with table of variable height - Testing of the accuracy - Part 1 : machines with horizontal spindle |
| 28 | AFNOR NF EN 4408-004-2005 | 2005-12-01 | French | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 4 : items obtained by winding |
| 29 | AFNOR UTE C93-530-2005 | 2005-12-01 | French | Electronic components - Cables with symetrical circuits for high frequency transmission - Generic specification |
| 30 | AFNOR NF EN 14367-2005 | 2005-12-01 | French | Non-controllable backflow preventer with different pressure zones - Family C, type A |
| 31 | AFNOR NF EN 60384-14-1-2005 | 2005-12-01 | French | Fixed capacitors for use in electronic equipment - Part 14-1 : blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D |
| 32 | AFNOR NF EN 957-1-2005 | 2005-12-01 | French | Stationary training equipment - Part 1 : general safety requirements and test methods |
| 33 | AFNOR NF EN 50402-2005 | 2005-12-01 | French | Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems - Modified by NF EN 50402/A1:200807 (C23-596/A1) |
| 34 | AFNOR NF EN 50396-2005 | 2005-12-01 | French | Non electrical test methods for low voltage energy cables |
| 35 | AFNOR NF EN 14868-2005 | 2005-12-01 | French | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems |
| 36 | AFNOR NF EN 14363-2005 | 2005-12-01 | French | Railway applications - Testing for the acceptance of running characteristics of railway vehicles - Testing of running behaviour and stationary tests |
| 37 | AFNOR NF EN 60898-1/A11-2005 | 2005-12-01 | French | Electrical accessories - Circuit breakers for overcurrent protection for household and similar installations - Part 1 : circuit-breakers for a.c. operation |
| 38 | AFNOR NF ISO 4401-2005 | 2005-12-01 | French | Hydraulic fluid power - Four-port directional control valves - Mounting surfaces |
| 39 | AFNOR NF EN ISO 3815-2-2005 | 2005-12-01 | French | Zinc and zinc alloys - Part 2 : analysis by inductively coupled plasma optical emission spectrometry |
| 40 | AFNOR NF EN 50395-2005 | 2005-12-01 | French | Electrical test methods for low voltage energy cables |
| 41 | AFNOR XP P16-106-2005 | 2005-12-01 | French | Management and control of drainage and severage network rehabilitation operations |
| 42 | AFNOR NF EN 12467/A1-2005 | 2005-12-01 | French | Fibre-cement flat sheets - Product specification and test methods |
| 43 | AFNOR NF ISO 11112-2005 | 2005-12-01 | French | Earth-moving machinery - Operator's seat - Dimensions and requirements |
| 44 | AFNOR NF EN 4408-001-2005 | 2005-12-01 | French | Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 1 : general rules |
| 45 | AFNOR NF ISO 18517-2005 | 2005-12-01 | French | Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide |
| 46 | AFNOR NF EN ISO 6416-2005 | 2005-12-01 | French | Hydrometry - Measurement of discharge by the ultrasonic (acoustic) method |
| 47 | AFNOR NF EN 60335-2-34/A1-2005 | 2005-12-01 | French | Household and similar electrical appliances - S茅curit茅 - Part 2-34 : particular requirements for motor-compressors |
| 48 | AFNOR NF EN 60335-2-34/A11-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-34 : particular requirements for motor-compressors |
| 49 | AFNOR NF ISO 8419-2005 | 2005-12-01 | French | Belt drives - Narrow V-belts - Sections 9N/J, 15N/J and 25N/J (lengths in the effective system) |
| 50 | AFNOR NF EN 50388-2005 | 2005-12-01 | French | Railway applications - Power supply and rolling stock - Tehcnical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
| 51 | AFNOR NF ISO 5019-6-2005 | 2005-12-01 | French | Refractory bricks - Dimensions - Part 6 : basic bricks for oxygen steel-making converters |
| 52 | AFNOR NF EN 14388-2005 | 2005-12-01 | French | Road traffic noise reducing devices - Specifications |
| 53 | AFNOR NF EN 60335-2-35-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-35 : particular requirements for instantaneous water heaters - Modified by NF EN 60335-2-35/A1:200704 (C73-835/A1) |
| 54 | AFNOR NF EN 13914-2-2005 | 2005-12-01 | French | Design, preparation and application of external renderings and internal plastering - Part 2 : internal plastering |
| 55 | AFNOR FD E29-307-2005 | 2005-12-01 | French | Industrial valves - Nomenclature of the constituent parts of the principal valves |
| 56 | AFNOR NF EN 60335-2-85-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-85 : particular requirements for fabric steamers - Modified by NF EN 60335-2-85/A1:200809 (C73-885/A1) |
| 57 | AFNOR XP ISO/TS 16649-3-2005 | 2005-12-01 | French | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 3 : most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide |
| 58 | AFNOR NF EN ISO 16588/A1-2005 | 2005-12-01 | French | Water quality - Determination of six complexing agents - Gas chromatographic method |
| 59 | AFNOR NF EN 13232-5-2005 | 2005-12-01 | French | Railway applications - Track - Switches and crossings - Part 5 : switches |
| 60 | AFNOR NF EN 14617-16-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 16 : determination of dimensions, geometric characteristics and surface quality of modular tiles |
| 61 | AFNOR NF C32-102-1 F1-2005 | 2005-12-01 | French | Fiche d'interpr茅tation de la norme NF C32-102-1 d'avril 2003 |
| 62 | AFNOR NF ISO 22308-2005 | 2005-12-01 | French | Cork stoppers - Sensory analysis |
| 63 | AFNOR NF ISO 21909-2005 | 2005-12-01 | French | Passive personal neutro dosemeters - Performance and test requirements |
| 64 | AFNOR NF ISO 2921-2005 | 2005-12-01 | French | Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test) |
| 65 | AFNOR NF ISO 21870-2005 | 2005-12-01 | French | Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry |
| 66 | AFNOR XP ISO/TS 14415-2005 | 2005-12-01 | French | Ergonomics of the thermal environment - Application of International Standards to people with special requirements |
| 67 | AFNOR FD CEN/TR 14489-2005 | 2005-12-01 | French | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| 68 | AFNOR NF EN 12697-41-2005 | 2005-12-01 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 41 : resistance to de-icing fluids |
| 69 | AFNOR NF EN 14639-2005 | 2005-12-01 | French | Crude tar and crude benzole - Characteristics and tests methods |
| 70 | AFNOR XP ISO/TS 13399-2-2005 | 2005-12-01 | French | Cutting tool data representation and exchange - Part 2 : reference dictionary for cutting items |
| 71 | AFNOR NF EN 12697-43-2005 | 2005-12-01 | French | Asphalt - Pr茂Bituminous mixtures - Test methods for hot mix asphalt - Part 43 : resistance to fuel |
| 72 | AFNOR NF ISO 19238-2005 | 2005-12-01 | French | Radiation protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics |
| 73 | AFNOR NF ISO 2878-2005 | 2005-12-01 | French | Rubber - Antistatic and conductive products - Determination of electrical resistance |
| 74 | AFNOR NF EN 14654-1-2005 | 2005-12-01 | French | Management and control of cleaning operations in drains and sewers - Pat 1 : sewer cleaning |
| 75 | AFNOR FD CEN/TR 13767-2005 | 2005-12-01 | French | Characterization of sludges - Good practice for sludges incineration with and without grease and screenings |
| 76 | AFNOR NF ISO 18589-1-2005 | 2005-12-01 | French | Measurements of radioactivity in the environment - Soil - Part 1 : general guidelines and definitions |
| 77 | AFNOR NF EN ISO 21968-2005 | 2005-12-01 | French | Non-magnetic metallic coatings on metallic and non-metallic basis materials - Measurement of coating thickness - Phase-sensitive eddy-current method |
| 78 | AFNOR NF EN 13956-2005 | 2005-12-01 | French | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| 79 | AFNOR NF EN 14956-2005 | 2005-12-01 | French | Surfaces for sports areas - Determination of water content of unbound mineral surfaces for outdoor sports areas |
| 80 | AFNOR NF ISO 15202-3-2005 | 2005-12-01 | French | Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 3 : analysis |
| 81 | AFNOR NF EN ISO 11064-6-2005 | 2005-12-01 | French | Ergonomic design of control centres - Part 6 : environmental requirements for control centres |
| 82 | AFNOR NF EN ISO 6874-2005 | 2005-12-01 | French | Dentistry - Polymer-based pit and fissure sealants |
| 83 | AFNOR NF EN ISO 17201-1-2005 | 2005-12-01 | French | Acoustics - Noise from shooting ranges - Part 1 : determination of muzzle blast by measurement |
| 84 | AFNOR NF A05-109-2005 | 2005-12-01 | French | Corrosion of metals and alloys - Neutral salt spray test - Electroplated or non-electroplated zinc and alloyed zinc coatings with or without conversion |
| 85 | AFNOR NF EN ISO 5164-2005 | 2005-12-01 | French | Petroleum products - Determination of knock characteristics of motor fuels - Research method |
| 86 | AFNOR NF EN ISO 17353-2005 | 2005-12-01 | French | Water quality - Determination of selected organotin compounds - Gas chromatographic method |
| 87 | AFNOR NF EN 13845-2005 | 2005-12-01 | French | Resilient floor coverings - Polyvinyl chloride floor coverings with particle based enhanced slip resistance - Specification |
| 88 | AFNOR NF EN ISO 10821-2005 | 2005-12-01 | French | Industrial sewing machines - Safety requirements for sewing machines, units and systems - Modified by NF EN ISO 10821/A1:200911 (G90-002/A1) |
| 89 | AFNOR NF ISO 9247-2005 | 2005-12-01 | French | Earth-moving machinery - Electrical wires and cables - Principles of identification and marking |
| 90 | AFNOR NF P98-491-2005 | 2005-12-01 | French | Products in manufactured concrete - Safety aqueduct head in precast concrete |
| 91 | AFNOR NF EN 12101-1-2005 | 2005-12-01 | French | Smoke and heat control systems - Part 1 : specification for smoke barriers - Modified by NF EN 12101-1/A1:200606 (S62-301/A1) |
| 92 | AFNOR NF EN 12126-2005 | 2005-12-01 | French | Chemicals used for treatment of water intended for human consumption - Liquefied ammonia |
| 93 | AFNOR NF ISO 37-2005 | 2005-12-01 | French | Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties |
| 94 | AFNOR FD CEN GUIDE 414-2005 | 2005-12-01 | French | Safety of machinery - Rules for the drafting and presentation of safety standards |
| 95 | AFNOR NF EN 60239-2005 | 2005-12-01 | French | Graphite electrodes for electric arc furnaces - Dimensions and designation |
| 96 | AFNOR NF EN ISO 21007-1-2005 | 2005-12-01 | French | Gas cylinders - Identification and marking using radio frequency identification technology - Part 1 : reference architecture and terminology |
| 97 | AFNOR NF EN 50144-1/A1-2005 | 2005-12-01 | French | Safety of hand-held electric motor operated tools - Part 1 : general requirements |
| 98 | AFNOR NF EN 50144-1/A2-2005 | 2005-12-01 | French | Safety of hand-held electric motor-operated tools - Part 1 : general requirements |
| 99 | AFNOR NF EN 60335-2-98/A1-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-98 : particular requirements for humidifiers |
| 100 | AFNOR NF EN ISO 5163-2005 | 2005-12-01 | French | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method |
| 101 | AFNOR NF EN ISO 21898-2005 | 2005-12-01 | French | Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods |
| 102 | AFNOR NF EN 60749-34-2005 | 2005-12-01 | French | Semiconducteur devices - Mechanical and climatic test methods - Part 34 : power cycling |
| 103 | AFNOR NF EN 60749-33-2005 | 2005-12-01 | French | Semiconductor devices - Mechanical and climatic test methods - Part 33 : accelerated moisture resistance - unbiased autoclave |
| 104 | AFNOR NF EN ISO 21351-2005 | 2005-12-01 | French | Space systems - Functional and technical specifications |
| 105 | AFNOR NF EN 60749-24-2005 | 2005-12-01 | French | Semiconductor devices - Mechanical and climatic test methods - Part 24 : accelerated moisture resistance - Unbiased HAST |
| 106 | AFNOR NF EN 60749-21-2005 | 2005-12-01 | French | Semiconductor devices - Mechanical and climatic test methods - Part 21 : solderability |
| 107 | AFNOR NF EN 60704-2-3/A1-2005 | 2005-12-01 | French | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-3 : particular requirements for dishwashers |
| 108 | AFNOR NF EN 12497-2005 | 2005-12-01 | French | Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of mercury in an aqueous extract |
| 109 | AFNOR NF EN 12498-2005 | 2005-12-01 | French | Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium, lead and chromium in an aqueous extract |
| 110 | AFNOR NF EN 61754-23-2005 | 2005-12-01 | French | Fibre optic connector interfaces - Part 23 : type LX.5 connector family |
| 111 | AFNOR NF EN 55016-2-1/A1-2005 | 2005-12-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1 : methods of measurement of disturbances and immunity - Conducted disturbance measurements |
| 112 | AFNOR NF EN 1097-9/A1-2005 | 2005-12-01 | French | Tests for mechanical and physical properties of aggregate - Part 9 : determination of the resistance to wear by abrasion from studded tyres - Nordic test |
| 113 | AFNOR NF EN 1101/A1-2005 | 2005-12-01 | French | Textiles and textile products - Burning behaviour - Curtains and drapes - Detailed procedure to determine the ignitability of vertically oriented specimens (small flame) |
| 114 | AFNOR NF EN 61937-7-2005 | 2005-12-01 | French | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying to IEC 60958 - Part 7 : non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats |
| 115 | AFNOR NF EN 1104-2005 | 2005-12-01 | French | Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobic constituents |
| 116 | AFNOR NF EN ISO 14532-2005 | 2005-12-01 | French | Natural gas - Vocabulary |
| 117 | AFNOR NF EN 55016-2-2/A2-2005 | 2005-12-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2 : methods of measurement of disturbances and immunity - Measurement of disturbance power |
| 118 | AFNOR NF EN 13232-6-2005 | 2005-12-01 | French | Railway applications - Track - Switches and crossings - Part 6 : fixed common and obtuse crossings |
| 119 | AFNOR NF EN ISO 6974-6-2005 | 2005-12-01 | French | Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6 : determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns |
| 120 | AFNOR NF EN 12279/A1-2005 | 2005-12-01 | French | Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements |
| 121 | AFNOR NF EN 60335-2-24-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-24 : particular requirements for refrigerating appliances, ice-cream appliances and ice-makers - Modified by NF EN 60335-2-24/A1:200601 (C73-824/A1),NF EN 60335-2-24/A11:200601 (C73-824/A11),NF EN 60335-2-24/A2:200709 (C73-824/A2),NF EN 60335-2-24/A12:201006 (C73-824/A12) |
| 122 | AFNOR NF EN 14268-2005 | 2005-12-01 | French | Irrigation techniques - Meters for irrigation water |
| 123 | AFNOR NF EN 1266/A1-2005 | 2005-12-01 | French | Independent gas-fired convection heaters incorporating a fan to assist transportation of combustion air and/or flue gases |
| 124 | AFNOR NF EN 12507-2005 | 2005-12-01 | French | Transportation services - Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries |
| 125 | AFNOR NF EN 1563/A2-2005 | 2005-12-01 | French | Founding - Spheroidal graphite cast irons |
| 126 | AFNOR NF EN 14617-1-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 1 : determination of apparent density and water absorption |
| 127 | AFNOR NF ISO 6405-2/A2-2005 | 2005-12-01 | French | Earth-moving machinery - Symbols for operator controls and other displays - Part 2 : specific symbols for machines, equipment and accessories - Amendment 2 : additional symbols |
| 128 | AFNOR NF EN ISO 15614-2-2005 | 2005-12-01 | French | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2 : arc welding of aluminium and its alloys |
| 129 | AFNOR NF EN 14617-4-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 4 : determination of abrasion resistance |
| 130 | AFNOR NF EN 12264-2005 | 2005-12-01 | French | Health informatics - Categorial structures for systems of concepts |
| 131 | AFNOR NF EN 61499-2-2005 | 2005-12-01 | French | Function blocks - Part 2 : software tools requirements |
| 132 | AFNOR NF EN 14241-1-2005 | 2005-12-01 | French | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1 : seals in flue liners |
| 133 | AFNOR NF EN 61499-1-2005 | 2005-12-01 | French | Function blocks - Part 1 : architecture |
| 134 | AFNOR NF EN 14617-5-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 5 : determination of freeze and thaw resistance |
| 135 | AFNOR NF EN 62115-2005 | 2005-12-01 | French | Electric toys - Safety |
| 136 | AFNOR NF EN 14617-6-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 6 : determination of thermal shock resistance |
| 137 | AFNOR NF EN 60034-2-2005 | 2005-12-01 | French | Rotating electrical machines - Part 2 : methods for determining losses and efficiency of rotating electrical machinery from tests (excluding machines for traction vehicles) - Modified by NF EN 60034-2/A1:200601 (C51-112/A1),NF EN 60034-2/A2:200601 (C51-112/A2) |
| 138 | AFNOR NF EN 14617-9-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 9 : determination of impact resistance |
| 139 | AFNOR NF EN 60335-2-14-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-14 : particular requirements for kitchen machines |
| 140 | AFNOR NF EN 14617-10-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 10 : determination of chemical resistance |
| 141 | AFNOR NF E49-006-2005 | 2005-12-01 | French | Pneumatic fluid power - Cylinders with detachable mountings, 1 000 kPa (10 bar) series, bores from 32 mm to 320 mm - Dimensions of rod end with fixed plain eye and head angle MS3 |
| 142 | AFNOR NF E48-072-2005 | 2005-12-01 | French | Hydraulic fluid power - Flange heads for flanges according to NF ISO 6164 |
| 143 | AFNOR NF E48-071-2005 | 2005-12-01 | French | Hydraulic fluid power - Flange heads for flanges according to NF ISO 6162-1 and -2 |
| 144 | AFNOR NF EN 14617-11-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 11 : determination of linear thermal expansion coefficient |
| 145 | AFNOR NF ISO 3045-2005 | 2005-12-01 | French | Oil of bay [Pimenta racemosa (Mill.) J.W. Moore] |
| 146 | AFNOR NF EN 14617-12-2005 | 2005-12-01 | French | Agglomerated stone - Test method - Part 12 : determination of dimensional stability |
| 147 | AFNOR NF EN 1993-1-8-2005 | 2005-12-01 | French | Eurocode 3 : design of steel structures - Part 1-8 : design of joints |
| 148 | AFNOR NF EN 1993-1-9-2005 | 2005-12-01 | French | Eurocode 3 : design of steel structures - Part 1-9 : fatigue |
| 149 | AFNOR NF EN 1993-1-10-2005 | 2005-12-01 | French | Eurocode 3 - design of steel structures - Part 1-10 : material toughness and through-thickness properties |
| 150 | AFNOR NF EN 1998-3-2005 | 2005-12-01 | French | Eurocode 8 - design of structures for earthquake resistance - Part 3 : assessment and retrofitting of buildings |
| 151 | AFNOR NF EN 1998-6-2005 | 2005-12-01 | French | Eurocode 8 - Design of structures for earthquake resistance - Part 6 : towers, masts and chimneys |
| 152 | AFNOR NF EN 61427-2005 | 2005-12-01 | French | Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test |
| 153 | AFNOR NF EN 301451-1-2005 | 2005-12-01 | French | Telecommunications - Private Integrated Services Network (PISN) - Cordless Terminal Mobility (CTM) - Inter-exchange signalling protocol - Cordless terminal outgoing call additional network feature (ANF-CTMO) for the VPN b service entry point - Part 1 : test Suite Structure and Test purposes (TSS&TP) specification (V1.1.4) |
| 154 | AFNOR NF EN 14617-13-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 13 : determination of electrical resistivity |
| 155 | AFNOR NF EN 301452-1-2005 | 2005-12-01 | French | Telecommunications - Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Call completion supplementary service for the VPN b service entry point - Part 1 : test Suite Structure and Test Purposes (TSS&TP) specification (V1.1.4) |
| 156 | AFNOR NF EN 14617-15-2005 | 2005-12-01 | French | Agglomerated stone - Test methods - Part 15 : determination of compressive strength |
| 157 | AFNOR NF C32-201-1 F1-2005 | 2005-12-01 | French | Fiche d'interpr茅tation de la norme NF C32-201-1 de mai 2003 |
| 158 | AFNOR FD CEN/TR 14560-2005 | 2005-12-01 | French | Guidance for selection, use, care and maintenance of protective clothing against heat and flame |
| 159 | AFNOR NF EN 60076-10-2005 | 2005-12-01 | French | Power transformers - Part 10 : determination of sound levels |
| 160 | AFNOR NF EN ISO 17693-2005 | 2005-12-01 | French | Footwear - Test methods for uppers - Resistance to damage on lasting |
| 161 | AFNOR NF EN 681-2/A2-2005 | 2005-12-01 | French | Elastomeric Seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2 : thermoplastic elastomers |
| 162 | AFNOR NF EN 62365-2005 | 2005-12-01 | French | Digital audio - Digital input-output interfacing - Transmission of digital audio over asynchronous transfer mode (ATM) networks |
| 163 | AFNOR NF ISO 7195-2005 | 2005-12-01 | French | Nuclear energy - Packaging of uranium hexafluoride (UF6) for transport |
| 164 | AFNOR NF EN 10300-2005 | 2005-12-01 | French | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| 165 | AFNOR NF EN 14501-2005 | 2005-12-01 | French | Blinds and shutters - Thermal and visual confort - Performance characteristics and classification |
| 166 | AFNOR NF EN ISO 12625-6-2005 | 2005-12-01 | French | Tissue paper and tissue products - Part 6 : determination of grammage |
| 167 | AFNOR NF EN 14662-3-2005 | 2005-12-01 | French | Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography |
| 168 | AFNOR NF EN ISO 12625-1-2005 | 2005-12-01 | French | Tissue paper and tissue products - Part 1 : general guidance on terms |
| 169 | AFNOR NF EN ISO 12402-1-2005 | 2005-12-01 | French | Personal flotation devices - Part 1 : lifejackets for seagoing ships - Safety requirements |
| 170 | AFNOR FD CEN/TR 15135-2005 | 2005-12-01 | French | Welding - Design and non-destructive testing of welds |
| 171 | AFNOR NF EN 12864/A2-2005 | 2005-12-01 | French | Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures |
| 172 | AFNOR NF EN 14506-2005 | 2005-12-01 | French | Devices to prevent pollution by backflow of potable water - Automatic diverter - Family H, type C |
| 173 | AFNOR NF EN 681-3/A2-2005 | 2005-12-01 | French | Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 3 : cellular materials of vulcanized rubber |
| 174 | AFNOR NF EN ISO 10664-2005 | 2005-12-01 | French | Hexalobular internal driving feature for bolts and screws |
| 175 | AFNOR NF EN ISO 10591-2005 | 2005-12-01 | French | Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water |
| 176 | AFNOR NF EN ISO 10590-2005 | 2005-12-01 | French | Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water |
| 177 | AFNOR NF EN 14179-2-2005 | 2005-12-01 | French | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2 : evaluation of conformity/Product standard |
| 178 | AFNOR NF EN 681-4/A2-2005 | 2005-12-01 | French | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4 : cast polyurethane sealing elements |
| 179 | AFNOR NF EN 14726-2005 | 2005-12-01 | French | Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis |
| 180 | AFNOR NF EN 682/A1-2005 | 2005-12-01 | French | Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids |
| 181 | AFNOR NF EN 60947-4-1/A2-2005 | 2005-12-01 | French | Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters |
| 182 | AFNOR NF EN 14522-2005 | 2005-12-01 | French | Determination of the auto ignition temperature of gases and vapours |
| 183 | AFNOR NF EN 695-2005 | 2005-12-01 | French | Kitchen sinks - Connecting dimensions |
| 184 | AFNOR NF ISO 16049-1-2005 | 2005-12-01 | French | Air cargo equipment - Restraint straps - Part 1 : design criteria and testing methods |
| 185 | AFNOR NF M60-805-4-2005 | 2005-12-01 | French | Nuclear energy - Measurement of environmental radioactivity - Water - Part 4 : uranium measurement in water using Inductively Coupled Plasma Mass spectrometry |
| 186 | AFNOR NF ISO 16049-2-2005 | 2005-12-01 | French | Air cargo equipment - Restraint straps - Part 2 : utilization guidelines and lashing calculations |
| 187 | AFNOR NF ISO 6750-2005 | 2005-12-01 | French | Earth-moving machinery - Operation manual - Content and format |
| 188 | AFNOR NF EN 1001-1-2005 | 2005-12-01 | French | Durability of wood and wood-based products - Terminology - Part 1 : list of equivalent terms |
| 189 | AFNOR NF EN 60601-2-1/A1-2005 | 2005-12-01 | French | Medical electrical equipment - Particular requirements for the safety of electron accelerators in the range 1 MeV to 50 MeV |
| 190 | AFNOR NF EN 1001-2-2005 | 2005-12-01 | French | Durability of wood and wood-based products - Terminology - Part 2 : vocabulary |
| 191 | AFNOR NF ISO 6505-2005 | 2005-12-01 | French | Rubber, vulcanized or thermoplastic - Determination of tendency to adhere to and corrode metals |
| 192 | AFNOR NF A80-200-2-2005 | 2005-12-01 | French | Welding - Qualification of welders and of armour plating welding operators - Part 2 : aluminium |
| 193 | AFNOR NF A80-200-1-2005 | 2005-12-01 | French | Welding - Qualification of welders and of armour plating welding operators - Part 1 : steels |
| 194 | AFNOR NF EN 13757-4-2005 | 2005-12-01 | French | Communication systems for meters and remote reading of meters - Part 4 : wireless meter readout (Radio meter reading for operation in the 868 MHz to 870 MHz SRD band) |
| 195 | AFNOR NF M60-805-5-2005 | 2005-12-01 | French | Nuclear energy - Measurement of environmental radioactivity - Water - Part 5 : measurement of the activity and concentration of uranium in water by alpha spectrometry |
| 196 | AFNOR NF T45-020-2005 | 2005-12-01 | French | Raw materials for the rubber industry - Factice - Method of test |
| 197 | AFNOR NF EN ISO 7494-1-2005 | 2005-12-01 | French | Dentistry - Dental units - Part 1 : general requirements and test methods |
| 198 | AFNOR NF EN 679-2005 | 2005-12-01 | French | Determination of the compressive strength of autoclaved aerated concrete |
| 199 | AFNOR NF X30-424-2005 | 2005-12-01 | French | Waste - Determination of the permeability coefficient of land by constant load infiltration test in a borehole |
| 200 | AFNOR NF EN 14719-2005 | 2005-12-01 | French | Pulp, paper and board - Determination of the Diisopropylnaphtalene (DIPN) content by solvent extraction |
| 201 | AFNOR NF EN 61029-2-5-2005 | 2005-12-01 | French | Safety of transportable motor-operated electric tools - Part 2 : particular requirements for band saws |
| 202 | AFNOR NF EN 61029-2-9-2005 | 2005-12-01 | French | Safety of transportable motor-operated electric tools - Part 2-9 : particular requirements for mitre saws |
| 203 | AFNOR NF EN 61034-1-2005 | 2005-12-01 | French | Measurement of smoke density of cables burning under defined conditions - Part 1 : test apparatus |
| 204 | AFNOR NF EN 61034-2-2005 | 2005-12-01 | French | Measurement of smoke density of cables burning under defined conditions - Part 2 : test procedure and requirements |
| 205 | AFNOR NF M60-321-2005 | 2005-12-01 | French | Nuclear energy - Nuclear fuel cycle technology - Waste - Non-intrusive, non-destructive determination of the tritium activity of a package containing tritiated waste by measurement of helium-3 leakage from the package |
| 206 | AFNOR NF EN 61058-2-4-2005 | 2005-12-01 | French | Switches for appliances - Part 2-4 : particular requirements for independently mounted switches |
| 207 | AFNOR NF EN ISO 7686-2005 | 2005-12-01 | French | Plastics pipes and fittings - Determination of opacity |
| 208 | AFNOR NF M60-322-2005 | 2005-12-01 | French | Nuclear energy - Nuclear fuel cycle technology - Waste - Determination of iron 55 activity in effluents and waste by liquid scintillation after prior chemical separation |
| 209 | AFNOR NF ISO 10470-2005 | 2005-12-01 | French | Green coffee - Defect reference chart |
| 210 | AFNOR NF EN 13518/A1-2005 | 2005-12-01 | French | Footwear - Test methods for uppers - Water resistance |
| 211 | AFNOR FD X07-007-2005 | 2005-12-01 | French | Metrology - Implementation guide for NF EN ISO 10012 "Measurement management systems - Requirements for measurement processes and measuring equipment" - Design development, control and improvement of measurement or test processes |
| 212 | AFNOR NF EN 14321-2-2005 | 2005-12-01 | French | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2 : evaluation of conformity/Product standard |
| 213 | AFNOR NF EN 1022-2005 | 2005-12-01 | French | Domestic furniture - Seating - Determination of stability |
| 214 | AFNOR FD X05-005-2-2005 | 2005-12-01 | French | Graphical symbols for use on equipment - Part 2 : compilation of designations adopted by the different ISO Technical Committees having used ISO 7000 graphical symbols |
| 215 | AFNOR NF EN 60519-10-2005 | 2005-12-01 | French | Safety in electroheat installations - Part 10 : particular requirements for electrical resistance trace heating systems for industrial and commercial applications |
| 216 | AFNOR NF EN 14697-2005 | 2005-12-01 | French | Textiles - Terry towels and terry fabrics - Specification and methods of test |
| 217 | AFNOR NF M60-323-2005 | 2005-12-01 | French | Nuclear energy - Nuclear fuel cycle technology - Waste - Guide for pre-analysis dissolution of effluents, waste and embedding matrices |
| 218 | AFNOR NF EN ISO 5983-1-2005 | 2005-12-01 | French | Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1 : Kjeldahl method |
| 219 | AFNOR NF M60-324-2005 | 2005-12-01 | French | Nuclear energy - Nuclear fuel cycle technology - Determination of leaching resistance of homogeneous waste blocks |
| 220 | AFNOR NF EN 61338-4-2005 | 2005-12-01 | French | Waveguide type dielectric resonators - Part 4 : sectional specification |
| 221 | AFNOR NF EN 61338-4-1-2005 | 2005-12-01 | French | Waveguide type dielectric resonators of assessed quality - Part 4-1 : blank detail specification |
| 222 | AFNOR NF EN 1052-5-2005 | 2005-12-01 | French | Methods of test for masonry - Part 5 : determination of bond strength by the bond wrentch method |
| 223 | AFNOR NF M60-325-2005 | 2005-12-01 | French | Nuclear energy - Nuclear fuel cycle technology - Waste - Determination of tritium activity in waste by liquid scintillation |
| 224 | AFNOR NF EN ISO 8980-5-2005 | 2005-12-01 | French | Ophtalmic optics - Uncut finished spectacle lenses - Part 5 : minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant |
| 225 | AFNOR NF EN 14694-2005 | 2005-12-01 | French | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of resistance to dynamic water pressure after damage by pre-treatment |
| 226 | AFNOR NF EN 14692-2005 | 2005-12-01 | French | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of the resistance to compaction of an asphalt layer |
| 227 | AFNOR NF EN 13286-48-2005 | 2005-12-01 | French | Unbound and hydraulically bound mixtures - Part 48 : test method for the determination of degree of pulverisation |
| 228 | AFNOR NF EN 61605-2005 | 2005-12-01 | French | Fixed inductors for use in electronic and telecommunication equipment - Marking codes |
| 229 | AFNOR NF EN 14334-2005 | 2005-12-01 | French | Inspection and testing of LPG road tankers |
| 230 | AFNOR NF EN 13084-4-2005 | 2005-12-01 | French | Free-standing chimneys - Part 4 : brick liners - Design and execution |
| 231 | AFNOR NF EN 12386-2005 | 2005-12-01 | French | Chemicals used for treatment of water intended for human consumption - Copper sulfate |
| 232 | AFNOR NF ISO 10381-5-2005 | 2005-12-01 | French | Soil quality - Sampling - Part 5 : guidance on the procedure for the investigation of urban and industrial sites with regard to soil contamination |
| 233 | AFNOR NF EN 61675-2/A1-2005 | 2005-12-01 | French | Radionuclide imaging devices - Characteristics and test conditions - Part 2 : single photon emission computer tomographs |
| 234 | AFNOR FD CEN/TR 15160-2005 | 2005-12-01 | French | Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
| 235 | AFNOR NF ISO 10110-10-2005 | 2005-12-01 | French | Optics and photonics - Preparation of drawings for optical elements and systems - Part 10 : table representing data of optical elements and cemented assemblies |
| 236 | AFNOR NF ISO 10110-17-2005 | 2005-12-01 | French | Optics and photonics - Preparation of drawings for optical elements and systems - Part 17 : laser irradiation damage threshold |
| 237 | AFNOR FD CEN/TR 15126-2005 | 2005-12-01 | French | Characterization of sludges - Good practice for landfilling of sludges and sludges treatment residues |
| 238 | AFNOR NF EN 61822-2005 | 2005-12-01 | French | Electrical installations for lighting and beaconing of aerodromes - Constant current regulators |
| 239 | AFNOR XP CEN/TS 14383-3-2005 | 2005-12-01 | French | Prevention of crime - Urban planning and design - Part 3 : dwellings |
| 240 | AFNOR FD CEN/TR 15046-2005 | 2005-12-01 | French | Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation and water-spraying procedure |
| 241 | AFNOR NF EN 14672-2005 | 2005-12-01 | French | Characterization of sludges - Determination of total phosphorus |
| 242 | AFNOR NF EN 681-1/A3-2005 | 2005-12-01 | French | Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1 : vulcanized rubber |
| 243 | AFNOR NF EN 14731-2005 | 2005-12-01 | French | Execution of special geotechnical work - group treatment by deep vibration |
| 244 | AFNOR NF EN 60335-2-61/A1-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-61 : particular requirements for thermal-storage room heaters |
| 245 | AFNOR NF EN ISO 140-11-2005 | 2005-12-01 | French | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 11 : laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors |
| 246 | AFNOR NF EN 1888/A1-2005 | 2005-12-01 | French | Child care articles - Wheeled child conveyances - Safety requirements and test methods |
| 247 | AFNOR NF EN ISO 294-2/A1-2005 | 2005-12-01 | French | Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2 : small tensile bars |
| 248 | AFNOR NF ISO 13528-2005 | 2005-12-01 | French | Statistical methods for use in proficiency testing by interlaboratory comparisons |
| 249 | AFNOR NF EN 1888/A2-2005 | 2005-12-01 | French | Child care articles - Wheeled child conveyances - Safety requirements and test methods |
| 250 | AFNOR NF EN 1888/A3-2005 | 2005-12-01 | French | Child care articles - Wheeled child conveyances - Safety requirements and test methods |
| 251 | AFNOR NF EN ISO 661-2005 | 2005-12-01 | French | Animal and vegetable fats and oils - Preparation of test sample |
| 252 | AFNOR NF EN 13069-2005 | 2005-12-01 | French | Chimneys - Clay/ceramic outer walls for system chimneys - Requirements and test methods |
| 253 | AFNOR NF EN 1949/A1-2005 | 2005-12-01 | French | Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other vehicles |
| 254 | AFNOR NF EN 60335-2-3/A1-2005 | 2005-12-01 | French | Household and similar electrical appliances - Safety - Part 2-3 : particular requirements for electric irons |
| 255 | AFNOR NF EN 12255-16-2005 | 2005-12-01 | French | Wastewater treatment plants - Part 16 : physical (mechanical) filtration |
| 256 | AFNOR NF EN ISO 10426-2/A1-2005 | 2005-12-01 | French | Petroleum and natural gas industries - Cements and materials for well cementing - Part 2 : testing of well cements - Amendment 1 : water-wetting capability testing |
| 257 | AFNOR NF ISO 706-2005 | 2005-12-01 | French | Rubber latex - Determination of coagulum content (sieve residue) |
| 258 | AFNOR BP X35-074-2005 | 2005-12-01 | French | Consideration of accessibility - Electrodomestic appliances - White products |
| 259 | AFNOR NF EN ISO/CEI 15423-2005 | 2005-12-01 | French | Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing |
| 260 | AFNOR NF EN ISO 18856-2005 | 2005-12-01 | French | Water quality - Determination of selected phthalates using gas chromatography/mass spectrometry |
| 261 | AFNOR NF EN ISO 18756-2005 | 2005-12-01 | French | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
| 262 | AFNOR BP V01-100-2005 | 2005-12-01 | French | Business-to-business commerce within the agricultural and agri-food industry sector - Joint commitments specific to business-to-business commerce within the potato, fruit and vegetable, wine, cereal, oil and protein crop and agri-food supply sectors |
| 263 | AFNOR NF EN ISO 17700-2005 | 2005-12-01 | French | Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing |
| 264 | AFNOR NF EN 60335-1/A11-2005 | 2005-12-01 | French | Safety of household and similar electrical appliances - Part 1 : general requirements |
| 265 | AFNOR NF EN 3338-2005 | 2005-12-01 | French | Aerospace series - Aluminium alloy AL-P7050 - T74511 - Extruded bar and section - a or D < or = 150 mm with peripheral coarse grain control |
| 266 | AFNOR NF EN ISO 17695-2005 | 2005-12-01 | French | Footwear - Test methods for uppers - Deformability |
| 267 | AFNOR NF EN ISO 15854-2005 | 2005-12-01 | French | Dentistry - Casting and baseplate waxes |
| 268 | AFNOR NF EN 301459-2005 | 2005-12-01 | French | Satellite Earth Stations and Systems (SES) - Harmonised EN for satellite interactive terminals (SIT) and satellite User terminals (SUT) transmitting towards satellites in geostationary orbit in the 29,5 to 30,0 GHz frequency bands covering essential requi |
| 269 | AFNOR NF EN 60601-1-8-2005 | 2005-11-01 | French | Medical electrical equipment - Part 1-8 : general requirements for safety - Collateral standard : general requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems - Modified by NF EN 60601-1-8/A1:200609 (C74-018/A1) |
| 270 | AFNOR NF EN 48-2005 | 2005-11-01 | French | Wood preservatives - Determination of eradicant action against larvae of Anobium punctatum (de Geer) (Laboratory method) |
| 271 | AFNOR NF ISO 10533/A1-2005 | 2005-11-01 | French | Earth-moving machinery - Lift-arm support devices |
| 272 | AFNOR NF EN ISO 3381-2005 | 2005-11-01 | French | Railway applications - Acoustics - Measurement of noise inside railbound vehicles |
| 273 | AFNOR NF EN 81-73-2005 | 2005-11-01 | French | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73 : behaviour of lifts in the event of fire |
| 274 | AFNOR NF EN 60947-3/A2-2005 | 2005-11-01 | French | Low-voltage switchgear and controlgear - Part 3 : switches, disconnectors, switch-disconnectors and fuse-combination units |
| 275 | AFNOR NF EN ISO 6978-1-2005 | 2005-11-01 | French | Natural gas - Determination of mercury - Part 1 : sampling of mercury by chemisorption on iodine |
| 276 | AFNOR NF EN ISO 6976-2005 | 2005-11-01 | French | Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition |
| 277 | AFNOR NF EN ISO 6978-2-2005 | 2005-11-01 | French | Natural gas - Determination of mercury - Part 2 : sampling of mercury by amalgamation on gold/platinum alloy |
| 278 | AFNOR NF EN ISO 7438-2005 | 2005-11-01 | French | Metallic materials - Bend test |
| 279 | AFNOR NF EN 12641-1-2005 | 2005-11-01 | French | Swap bodies and commercial vehicles - Tarpaulins - Part 1 : minimum requirements |
| 280 | AFNOR NF EN 13748-1/A1-2005 | 2005-11-01 | French | Terrazzo tiles - Part 1 : terrazzo tiles for internal use |
| 281 | AFNOR NF EN 61029-1/A11-2005 | 2005-11-01 | French | Safety of transportable motor-operated electric tools - Part 1 : general requirements |
| 282 | AFNOR NF EN 61029-1/A12-2005 | 2005-11-01 | French | Safety of transportable motor-operated electric tools - Part 1 : general requirements |
| 283 | AFNOR NF EN 61029-2-4/A1-2005 | 2005-11-01 | French | Safety of transportable motor-operated electric tools - Part 2-4 : particular requirements for bench grinders |
| 284 | AFNOR NF EN 61029-2-11-2005 | 2005-11-01 | French | Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws |
| 285 | AFNOR NF EN 60598-2-11-2005 | 2005-11-01 | French | Luminaires - Part 2-11 : particular requirements - Aquarium luminaires |
| 286 | AFNOR NF EN 14321-1-2005 | 2005-11-01 | French | Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 1 : definition and description |
| 287 | AFNOR NF EN ISO 8041-2005 | 2005-11-01 | French | Human response to vibration - Measuring instrumentation |
| 288 | AFNOR NF EN 50369-2005 | 2005-11-01 | French | Liquid tight sheathing systems for cable management |
| 289 | AFNOR NF EN 61675-1-2005 | 2005-11-01 | French | Radionuclide imaging devices - Characteristics and test conditions - Part 1 : positron emission tomographs - Modified by NF EN 61675-1/A1:200901 (C74-215/A1) |
| 290 | AFNOR NF EN 61675-2-2005 | 2005-11-01 | French | Radionuclide imaging devices - Characteristics and test conditions - Part 2 : single photon emission computer tomographs - Modified by NF EN 61675-2/A1:200512 (C74-216/A1) |
| 291 | AFNOR NF EN 60335-2-72/A1-2005 | 2005-11-01 | French | Safety of household and similar electrical appliances - Part 2-72 : particular requirements for automatic machines for floor treatment for commercial and industrial use |
| 292 | AFNOR NF EN 60335-2-71-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-71 : particular requirements for electrical heating appliances for breeding and rearing animals - Modified by NF EN 60335-2-71/A1:200709 (C73-871/A1) |
| 293 | AFNOR NF EN 13209-2-2005 | 2005-11-01 | French | Child use and care articles - Baby carriers - Safety requirements and test methods - Part 2 : soft carrier |
| 294 | AFNOR NF EN 50423-1-2005 | 2005-11-01 | French | Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 1 : general requirements - Common specifications |
| 295 | AFNOR NF EN 50423-2-2005 | 2005-11-01 | French | Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 2 : index of National Normative Aspects |
| 296 | AFNOR NF EN 50423-3-8-2005 | 2005-11-01 | French | Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Part 3-8 : set of National Normative Aspects - France |
| 297 | AFNOR NF EN 55016-1-1/A1-2005 | 2005-11-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1 : radio disturbance and immunity measuring apparatus - Measuring apparatus |
| 298 | AFNOR NF EN ISO 5912-2005 | 2005-11-01 | French | Camping tents |
| 299 | AFNOR NF EN 60335-2-6/A1-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-6 : particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
| 300 | AFNOR NF EN 10342-2005 | 2005-11-01 | French | Magnetic materials - Classification of surface insulations of electrical steel, strip and laminations |
| 301 | AFNOR NF EN 14179-1-2005 | 2005-11-01 | French | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 1 : definition and description |
| 302 | AFNOR NF EN 10305-6-2005 | 2005-11-01 | French | Steel tubes for precision applications - Technical delivery conditions - Part 6 : welded cold drawn tubes for hydraulic and pneumatic power systems |
| 303 | AFNOR NF EN 60335-1/A2-2005 | 2005-11-01 | French | Safety of household and similar electrical appliances - Part 1 : general requirements |
| 304 | AFNOR NF EN 10027-1-2005 | 2005-11-01 | French | Designation systems for steel - Part 1 : steel names |
| 305 | AFNOR NF EN 4101-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2024 - T4 - Sheet and strip with improved stretch forming capability - 0,4 mm <= a <= 6 mm |
| 306 | AFNOR NF EN ISO 10563-2005 | 2005-11-01 | French | Building construction - Sealants - Determination of change in mass and volume |
| 307 | AFNOR NF EN 14662-2-2005 | 2005-11-01 | French | Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography |
| 308 | AFNOR NF EN 14662-4-2005 | 2005-11-01 | French | Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography |
| 309 | AFNOR NF EN 14662-5-2005 | 2005-11-01 | French | Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography |
| 310 | AFNOR NF EN ISO 13443-2005 | 2005-11-01 | French | Natural gas - Standard reference conditions |
| 311 | AFNOR NF EN ISO 13903-2005 | 2005-11-01 | French | Animal feeding stuffs - Determination of amino acids content |
| 312 | AFNOR BP S52-107-2005 | 2005-11-01 | French | Laying-out of specific ski runs - design and safety |
| 313 | AFNOR NF EN 14666-2005 | 2005-11-01 | French | Surface active agents - Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules - Gas-chromatographic method |
| 314 | AFNOR NF EN 14667-2005 | 2005-11-01 | French | Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method |
| 315 | AFNOR NF EN ISO 772/A2-2005 | 2005-11-01 | French | Hydrometric determinations - Vocabulary and symbols |
| 316 | AFNOR NF EN 14668-2005 | 2005-11-01 | French | Surface active agents - Determination of quaternary ammonium surface active agents in raw materials and formulated products - Potentiometric two phase titration method |
| 317 | AFNOR NF EN 14669-2005 | 2005-11-01 | French | Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method |
| 318 | AFNOR FD CEN/TR 14734-2005 | 2005-11-01 | French | Durability of wood and wood-based products - Determination of treatability of timber species to be impregnated with wood preservatives - Laboratory method |
| 319 | AFNOR NF EN 14670-2005 | 2005-11-01 | French | Surface active agents - Sodium dodecyl sulfate - Analysis method |
| 320 | AFNOR FD CEN/TR 14839-2005 | 2005-11-01 | French | Wood preservatives - Determination of the preventive efficacy against wood destroying basidiomycetes fungi |
| 321 | AFNOR FD CEN/TR 15230-2005 | 2005-11-01 | French | Workplace atmospheres - Guidance for sampling of inhalable, thoracic and respirable aerosols fractions |
| 322 | AFNOR NF EN 1360-2005 | 2005-11-01 | French | Rubber and hose assemblies for measured fuel dispensing systems - Specification |
| 323 | AFNOR NF Z40-011-2005 | 2005-11-01 | French | A methodology to assess the physical conditions of archive and library holdings |
| 324 | AFNOR FD X07-029-2-2005 | 2005-11-01 | French | Metrology - Thermometer verification and calibration procedures - Part 2 : verification and calibration procedures for thermocouples alone and thermocouple thermometers |
| 325 | AFNOR FD X40-501-2005 | 2005-11-01 | French | Protection - Termites - Buildings protection against termite infestation |
| 326 | AFNOR NF S94-090-2005 | 2005-11-01 | French | Medico-surgical equipment - Materials for ancillary positioning instruments for surgical instrument - Martensitic, precipitation hardening, austenitic and austeno-ferritic stainless steels |
| 327 | AFNOR NF P90-307-2-2005 | 2005-11-01 | French | Protective elements for in-ground, barrier-free, private or collective use swimming pools - Alarm systems - Part 2 : safety requirements and test methods for optical bean scanning detection systems |
| 328 | AFNOR NF ISO 6753-1-2005 | 2005-11-01 | French | Tools for pressing and moulding - Machined plates - Part 1 : machined plates for press tools |
| 329 | AFNOR NF ISO 6980-2-2005 | 2005-11-01 | French | Nuclear energy - Reference beta-particle radiations - Part 2 : calibration fundamentals related to basic quantities characterizing the radiation field |
| 330 | AFNOR NF ISO 15817-2005 | 2005-11-01 | French | Earth-moving machinery - Safety requirements for remote operator control |
| 331 | AFNOR NF EN 14744-2005 | 2005-11-01 | French | Inland navigation vessels and sea-going vessels - Navigation light |
| 332 | AFNOR NF EN 60684-3-216-2005 | 2005-11-01 | French | Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 216 : heat-shrinkable, flame-retarded, limited-fire hazard sleeving |
| 333 | AFNOR NF ISO 13909-8-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 8 : methods of testing for bias |
| 334 | AFNOR NF ISO 13909-7-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 7 : methods for determining the precision of sampling, sample preparation and testing |
| 335 | AFNOR NF ISO 13909-6-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 6 : Coke - Preparation of test samples |
| 336 | AFNOR NF ISO 13909-5-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 5 : Coke - Sampling from moving streams |
| 337 | AFNOR NF ISO 13909-4-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 4 : coal - Preparation of test samples |
| 338 | AFNOR NF ISO 13909-3-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 3 : coal - Sampling from stationary lots |
| 339 | AFNOR NF ISO 13909-2-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 2 : coal - Sampling from moving streams |
| 340 | AFNOR NF ISO 13909-1-2005 | 2005-11-01 | French | Hard coal and coke - Mechanical sampling - Part 1 : general introduction |
| 341 | AFNOR NF ISO 7507-2-2005 | 2005-11-01 | French | Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks - Part 2 : optical-reference-line method |
| 342 | AFNOR NF ISO 8528-1-2005 | 2005-11-01 | French | Reciprocating internal combustion engine driven alternating current generating sets - Part 1 : application, ratings and performance |
| 343 | AFNOR NF EN 60335-2-45-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-45 : particular requirments for portable heating tools and similar appliances - Modified by NF EN 60335-2-45/A1:200809 (C73-845/A1) |
| 344 | AFNOR NF ISO 7919-5-2005 | 2005-11-01 | French | Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 5 : machine sets in hydraulic power generating and pumping plants |
| 345 | AFNOR NF ISO 8528-2-2005 | 2005-11-01 | French | Reciprocating internal combustion engine driven alternating current generating sets - Part 2 : engines |
| 346 | AFNOR NF ISO 8528-4-2005 | 2005-11-01 | French | Reciprocating internal combustion engine driven alternating current generating sets - Part 4 : controlgear and switchgear |
| 347 | AFNOR NF ISO 8528-6-2005 | 2005-11-01 | French | Reciprocating internal combustion engine driven alternating current generating sets - Part 6 : test methods |
| 348 | AFNOR NF EN 60335-2-40/A12-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-40 : particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| 349 | AFNOR NF EN 60335-2-40/A11-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-40 : particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| 350 | AFNOR NF EN 14197-3/A1-2005 | 2005-11-01 | French | Cryogenic vessels - Static non-vacuum insulated vessels - Part 3 : operational requirements |
| 351 | AFNOR NF ISO 4730-2005 | 2005-11-01 | French | Oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) |
| 352 | AFNOR NF EN 60335-2-34-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-34 : particular requirements for motor-compressors - Modified by NF EN 60335-2-34/A1:200512 (C73-834/A1),NF EN 60335-2-34/A11:200512 (C73-834/A11),NF EN 60335-2-34/A2:201008 (C73-834/A2) |
| 353 | AFNOR NF EN 61558-1/A1-2005 | 2005-11-01 | French | Safety of power transformers, power supply units and similar - Part 1 : general requirements and tests |
| 354 | AFNOR NF EN 12778/A1-2005 | 2005-11-01 | French | Cookware - Pressure cookers for domestic use |
| 355 | AFNOR NF EN 61788-9-2005 | 2005-11-01 | French | Superconductivity - Part 9 : measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors |
| 356 | AFNOR NF P82-212-2005 | 2005-11-01 | French | Lifts - Safety rules for the constructions and installation of electric lifts - Specifications applicable in the case of the important modifications or improvement work |
| 357 | AFNOR NF P82-312-2005 | 2005-11-01 | French | Lifts - Safety rules for the constructions and installation of hydraulic lifts - Specifications applicable in the case of the important modifications or improvement work |
| 358 | AFNOR NF S31-110-2005 | 2005-11-01 | French | Acoustics - Description and measurement of environmental noise - Basic quantities and general evaluation methods |
| 359 | AFNOR NF EN 60728-11-2005 | 2005-11-01 | French | Cable networks for television signals, sound signals and interactive services - Part 11 : safety |
| 360 | AFNOR NF EN 62274-2005 | 2005-11-01 | French | Medical electrical equipment - Safety of radiotherapy record and verify systems |
| 361 | AFNOR NF ISO 1652-2005 | 2005-11-01 | French | Rubber latex - Determination of apparent viscosity by the Brookfield test method |
| 362 | AFNOR NF EN 300392-1-2005 | 2005-11-01 | French | Terrestrial Trunked Radio (TETRA) - Voice plus Data (V + D) - Part 1 : general network design (V1.3.1) |
| 363 | AFNOR NF EN 13363-2-2005 | 2005-11-01 | French | Solar protection devices combined with glazing - Calculation of total solar energy transmittance and light transmittance - Part 2 : detailed calculation method |
| 364 | AFNOR NF EN 13480-1/A1-2005 | 2005-11-01 | French | Metallic industrial piping - Part 1 : general |
| 365 | AFNOR NF EN 13480-3/AC2-2005 | 2005-11-01 | French | Corrigendum 2 to standard NF EN 13480-3:2002 |
| 366 | AFNOR NF EN 13480-4/AC2-2005 | 2005-11-01 | French | Corrigendum 2 to standard NF EN 13480-4:2002 |
| 367 | AFNOR XP E29-190-3-2005 | 2005-11-01 | French | Gas pressure regulators for distribution and service lines - Part 3 : type D Regulators |
| 368 | AFNOR XP E29-191-2005 | 2005-11-01 | French | Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 5 bar, for supply networks and service lines |
| 369 | AFNOR NF EN 301087-2005 | 2005-11-01 | French | Digital cellular telecommunications system (Phase 2 & Phase 2+) - Base Station System (BSS) equipment specification - Radio aspects (GSM 11.21 V 8.2.1) |
| 370 | AFNOR XP X43-305-2005 | 2005-11-01 | French | Air quality - Stationary source emissions - Sampling and deferred measurement of nitrogen monoxide (N2O) - Automatic method in emission by means of the non-dispersive infrared method - Automatic method |
| 371 | AFNOR NF EN ISO 15996-2005 | 2005-11-01 | French | Gas cylinders - Residual pressure valves - General requirements and type testing - Modified by NF EN ISO 15996/A1:200802 (E29-697/A1) |
| 372 | AFNOR NF EN 13609-1-2005 | 2005-11-01 | French | Health Informatics - Messages for maintenance of supporting information in healthcare systems - Part 1 : updating of coding schemes |
| 373 | AFNOR NF EN 13631-15-2005 | 2005-11-01 | French | Explosives for civil uses - High explosives - Part 15 : calculation of thermodynamic properties |
| 374 | AFNOR NF EN 60974-2-2005 | 2005-11-01 | French | Arc welding equipement - Part 2 : liquid cooling systems |
| 375 | AFNOR FD E29-413-2005 | 2005-11-01 | French | Industrial valves - Safety devices for protection against excessive pressure - Calculation of theoretical flowrate |
| 376 | AFNOR FD E29-769-2005 | 2005-11-01 | French | Transportable gas cylinders - Valve outlet connections - Allocations and dimensions for gases and gas mixtures for medical use |
| 377 | AFNOR FD ISO 16004-2005 | 2005-11-01 | French | Aircraft ground equipment - Passenger boarding bridge or transfer vehicle - Requirements for interface with aircraft doors |
| 378 | AFNOR FD X50-195-2005 | 2005-11-01 | French | Management systems - Guidelines for the management of an organization |
| 379 | AFNOR NF S31-110-2005 | 2005-11-01 | French | Acoustics - Description and measurement of environmental noise - Basic quantities and general evaluation methods |
| 380 | AFNOR NF ISO 7967-1-2005 | 2005-11-01 | French | Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1 : structure and external covers |
| 381 | AFNOR NF ISO 7967-8-2005 | 2005-11-01 | French | Reciprocating internal combustion engines - Vocabulary of components and systems - Part 8 : starting systems |
| 382 | AFNOR NF EN ISO 14924-2005 | 2005-11-01 | French | Thermal spraying - Post-treatment and finishing of thermally sprayed coatings |
| 383 | AFNOR NF EN 50085-1-2005 | 2005-11-01 | French | Cable trunking systems and cable ducting systems for electrical installations - Part 1 : general requirements |
| 384 | AFNOR NF EN 230-2005 | 2005-11-01 | French | Automatic burner control systems for oil burners |
| 385 | AFNOR NF EN 50083-8-2005 | 2005-11-01 | French | Cable networks for television signals, sound signals and interactive services - Part 8 : electromagnetic compatibility for networks - Modified by NF EN 50083-8/A11:200910 (C90-101-8/A11) |
| 386 | AFNOR NF EN 50065-4-7-2005 | 2005-11-01 | French | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and from 1,6 MHz to 30 MHz - Part 4-7 : portable low voltage decoupling filters - Safety requirements |
| 387 | AFNOR NF ISO 7967-7-2005 | 2005-11-01 | French | Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7 : governing systems |
| 388 | AFNOR NF EN ISO 1133-2005 | 2005-11-01 | French | Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| 389 | AFNOR NF EN 771-1/A1-2005 | 2005-11-01 | French | Specification for masonry units - Part 1 : clay masonry units |
| 390 | AFNOR NF EN 771-2/A1-2005 | 2005-11-01 | French | Specification for masonry units - Part 2 : calcium silicate masonry units |
| 391 | AFNOR NF EN 14880-2005 | 2005-11-01 | French | Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method |
| 392 | AFNOR NF EN 771-3/A1-2005 | 2005-11-01 | French | Specification for masonry units - Part 3 : aggregate concrete masonry units (Dense and light-weight aggregates) |
| 393 | AFNOR NF EN 771-4/A1-2005 | 2005-11-01 | French | Specification for masonry units - Part 4 : autoclaved aerated concrete masonry units |
| 394 | AFNOR NF ISO 7967-6-2005 | 2005-11-01 | French | Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6 : lubricating systems |
| 395 | AFNOR NF EN 771-5/A1-2005 | 2005-11-01 | French | Specification for masonry units - Part 5 : manufactured stone masonry units |
| 396 | AFNOR NF EN 772-2/A1-2005 | 2005-11-01 | French | Methods of test for masonry units - Part 2 : determination of percentage area of voids in masonry units (by paper indentation) |
| 397 | AFNOR NF EN 772-9/A1-2005 | 2005-11-01 | French | Methods of test for masonry units - Part 9 : determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling |
| 398 | AFNOR NF EN 772-16/A2-2005 | 2005-11-01 | French | Methods of test for masonry units - Part 16 : determination of dimensions |
| 399 | AFNOR NF EN 772-20/A1-2005 | 2005-11-01 | French | Methods of test for masonry units - Part 20 : determination of flatness of faces of masonry units |
| 400 | AFNOR NF EN 957-10-2005 | 2005-11-01 | French | Stationary training equipment - Part 10 : exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods |
| 401 | AFNOR NF EN 1148/A1-2005 | 2005-11-01 | French | Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data |
| 402 | AFNOR NF EN 14833-2005 | 2005-11-01 | French | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| 403 | AFNOR NF EN 14832-2005 | 2005-11-01 | French | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| 404 | AFNOR NF EN 14759-2005 | 2005-11-01 | French | Shutters - Acoustic insulation relative to airborne sound - Expression of performance |
| 405 | AFNOR NF EN 4450-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P7050- - T762 - Sheet - 0,8 mm < or = a < or = 6 mm |
| 406 | AFNOR NF EN 14757-2005 | 2005-11-01 | French | Water quality - Sampling of fish with multi-mesh gillnets |
| 407 | AFNOR NF EN 1433/A1-2005 | 2005-11-01 | French | Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity |
| 408 | AFNOR NF EN 14604-2005 | 2005-11-01 | French | Smoke alarm devices |
| 409 | AFNOR NF ISO 16881-1-2005 | 2005-11-01 | French | Cranes - Design calculation for rail wheels and associated trolley track supporting structure - Part 1 : general |
| 410 | AFNOR NF ISO 7967-4-2005 | 2005-11-01 | French | Reciprocating internal combustion engines - Vocabulary of components and systems - Part 4 : pressure charging and air/exhaust gas ducting systems |
| 411 | AFNOR NF EN 4007-2005 | 2005-11-01 | French | Aerospaces series - Aluminium alloy AL-P6082- - T6 or T62 - Sheet and strip - 0,4 mm < or = a < or = 6 mm |
| 412 | AFNOR NF EN 3979-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P8090- - O2 - Sheet for superplastic forming (SPF) - 0,8 mm < or = a < or = 6 mm |
| 413 | AFNOR NF EN 2089-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2014A - T6 or T62 - Sheets and strips - 0,4 mm < or = a < or = 6 mm |
| 414 | AFNOR NF EN 2090-2005 | 2005-11-01 | French | Aerospaces series - Aluminium alloy 2024- - T3 - Clad sheets and strips - 0,3 mm < or = a < or = 6 mm |
| 415 | AFNOR NF EN 2092-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P7075- - T6 or T62 - Clad sheet and strip - 0,4 mm < or = a < or = 6 mm |
| 416 | AFNOR NF EN 14576-2005 | 2005-11-01 | French | Geosynthetics - Test methods for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking |
| 417 | AFNOR NF EN ISO 6530-2005 | 2005-11-01 | French | Protective clothing - Protection against liquid chemicals - Determination of resistance of materials to penetration by liquids |
| 418 | AFNOR NF EN 2395-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2014A - T4 or T42 - Sheet and strip - 0,4 mm < or = a < or = 6 mm |
| 419 | AFNOR NF EN 2422-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2124- - T351 - Plates - 25 mm < a < or = 120 mm |
| 420 | AFNOR NF EN 2511-2005 | 2005-11-01 | French | Aerospaces series - Aluminium alloy AL-P7075- - T7351 - Plate - 6 mm < a < or = 100 mm |
| 421 | AFNOR NF EN ISO 10081-1-2005 | 2005-11-01 | French | Classification of dense shaped refractory products - Part 1 : alumina-silica |
| 422 | AFNOR NF EN 2693-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P5086- - H111 - Sheet and strip - 0,3 mm < or = a < or = 6 mm |
| 423 | AFNOR NF EN 2694-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P6061- - T6 or T62 - Sheet and strip - 0,4 mm < or = a < or = 6 mm |
| 424 | AFNOR NF EN 2703-2005 | 2005-11-01 | French | Aerospaces series - Aluminium alloy AL-P2024- - T4 or T42 - Clad sheets and strips - 0,3 mm < or = a < or = 6 mm |
| 425 | AFNOR NF EN 2732-2005 | 2005-11-01 | French | Aerospace series - Magnesium alloy MG-C46001 - T6 - Chill casting |
| 426 | AFNOR NF EN 2802-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P7475- - T761 - Sheet and strip - 0,6 mm < or = a < or = 6 mm |
| 427 | AFNOR NF EN 1071-3-2005 | 2005-11-01 | French | Advanced technical ceramics - Methods of test for ceramic coatings - Part 3 : determination of adhesion and other mechanical failure modes by a scratch test |
| 428 | AFNOR NF EN 60335-2-27-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-27 : particular requirements for appliances for skin exposure to ultraviolet and infrared radiation - Modified by NF EN 60335-2-27/A1:201007 (C73-827/A1),NF EN 60335-2-27/A2:201008 (C73-827/A2) |
| 429 | AFNOR NF EN 60601-2-25/A1-2005 | 2005-11-01 | French | Medical electrical equipment - Part 2-25 : particular requirements for the safety of electrocardiographs |
| 430 | AFNOR NF EN 60601-2-45-2005 | 2005-11-01 | French | Medical electrical equipment - Part 2-45 : particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices |
| 431 | AFNOR NF EN 60601-2-47-2005 | 2005-11-01 | French | Medical electrical equipment - Part 2-47 : Particular requirements for the safety, including essential performance, of ambulatory electrocardiographic systems |
| 432 | AFNOR NF EN 60836-2005 | 2005-11-01 | French | Specifications for unused silicone insulating liquids for electrotechnical purposes |
| 433 | AFNOR NF EN ISO 8340-2005 | 2005-11-01 | French | Building construction - Sealants - Determination of tensile properties at maintained extension |
| 434 | AFNOR NF EN 60118-13-2005 | 2005-11-01 | French | Electroacoustics - Hearing aids - Part 13 : electromagnetic compatibility (EMC) |
| 435 | AFNOR NF EN 61010-2-040-2005 | 2005-11-01 | French | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040 : particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| 436 | AFNOR NF ISO 11862-2005 | 2005-11-01 | French | Earth-moving machinery - Auxiliary starting aid electrical connector |
| 437 | AFNOR NF ISO 22866-2005 | 2005-11-01 | French | Equipment for crop protection - Methods for field measurement of spray drift |
| 438 | AFNOR NF ISO 80416-4-2005 | 2005-11-01 | French | Basic principles for graphical symbols for use on equipment - Part 4 : guidelines for the adaptation of graphical symbols for use on screens and displays (icons) |
| 439 | AFNOR NF ISO 6405-1-2005 | 2005-11-01 | French | Earth-moving machinery - Symbols for operator controls and other displays - Part 1 : common symbols |
| 440 | AFNOR NF EN 55016-2-3/A2-2005 | 2005-11-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3 : methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| 441 | AFNOR NF EN 55016-2-3/A1-2005 | 2005-11-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3 : methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| 442 | AFNOR NF ISO 5834-4-2005 | 2005-11-01 | French | Implants for surgery - Ultra-high molecular weight polyethylene - Part 4 : oxidation index measurement method |
| 443 | AFNOR NF ISO 35-2005 | 2005-11-01 | French | Natural rubber latex concentrate - Determination of mechanical stability - Modified by NF ISO 35/A1:200607 (T42-012/A1) |
| 444 | AFNOR NF EN 300395-4-2005 | 2005-11-01 | French | Terrestrial Trunked Radio (TETRA) - Speech codec for full-rate traffic channel - Part 4 : codec conformance testing (V1.3.1) |
| 445 | AFNOR NF H00-111-2005 | 2005-11-01 | French | Packing for dangerous substances - Resealable packing for solid products - Test method |
| 446 | AFNOR NF EN ISO 22612-2005 | 2005-11-01 | French | Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration |
| 447 | AFNOR CWA 15453-2005 | 2005-11-01 | French | Harmonisation of vocabularies for eLearning |
| 448 | AFNOR CWA 15454-2005 | 2005-11-01 | French | A Simple Query Interface Specification for Learning Repositories |
| 449 | AFNOR CWA 15455-2005 | 2005-11-01 | French | A European Model for Learner Competencies |
| 450 | AFNOR FD CEN ISO/TR 17641-3-2005 | 2005-11-01 | French | Destructive tests on welds in metallic materials - Hot cracking tests for weldments - Arc welding processes - Part 3 : externally loaded tests |
| 451 | AFNOR FD CEN/TR 12566-2-2005 | 2005-11-01 | French | Small wastewater treatment systems for up to 50 PT - Part 2 : soil infiltration systems |
| 452 | AFNOR FD ISO/TS 8611-3-2005 | 2005-11-01 | French | Pallets for materials handling - Flat pallets - Part 3 : maximum working loads |
| 453 | AFNOR NF EN ISO 21049-2005 | 2005-11-01 | French | Pumps - Shaft sealing systems for centrifugal and rotary pumps |
| 454 | AFNOR NF C17-100 F3-2005 | 2005-11-01 | French | Fiche d'interpr茅tation de la norme NF C17-100 de d茅cembre 1997 |
| 455 | AFNOR NF C32-070/A1-2005 | 2005-11-01 | French | Insulated cables and flexible cords for installations - Classification tests on cables and cords with respect to their behaviour to fire - Modified by NF C32-070 F4:201007 (C32-070F4) |
| 456 | AFNOR NF EN ISO 16805-2005 | 2005-11-01 | French | Binders for paints and varnishes - Determination of glass transition temperature |
| 457 | AFNOR NF EN ISO 15732-2005 | 2005-11-01 | French | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| 458 | AFNOR NF E25-005-2005 | 2005-11-01 | French | Fasteners - Test methods |
| 459 | AFNOR NF E51-732-2005 | 2005-11-01 | French | Controlled mechanical ventilation components - Facade air inlets - Characteristics and function ability |
| 460 | AFNOR NF EN 12274-7-2005 | 2005-11-01 | French | Slurry surfacing - Test methods - Part 7 : shaking abrasion test |
| 461 | AFNOR NF EN ISO 6975-2005 | 2005-11-01 | French | Natural gas - Extended analysis - Gas-chromatographic method |
| 462 | AFNOR NF EN 806-2-2005 | 2005-11-01 | French | Specification for installations inside buildings conveying water for human consumption - Part 2 : design |
| 463 | AFNOR NF EN 1064-2005 | 2005-11-01 | French | Health Informatics - Standard communication protocol - Computer-assisted electrocardiography |
| 464 | AFNOR NF EN 1068-2005 | 2005-11-01 | French | Health informatics - Registration of coding systems |
| 465 | AFNOR NF EN 1991-1-4-2005 | 2005-11-01 | French | Eurocode 1 : actions on structures - Part 1-4 : gereral actions - Wind actions - Modified by NF EN 1991-1-4/A1:201010 (P06-114-1/A1) |
| 466 | AFNOR NF EN 1991-1-6-2005 | 2005-11-01 | French | Eurocode 1 : actions on structures - Part 1-6 : general actions - Actions during execution |
| 467 | AFNOR NF EN 1993-1-2-2005 | 2005-11-01 | French | Eurocode 3 - Design of steel structures - Part 1-2 : general rules - Structural fire design |
| 468 | AFNOR NF EN 1995-1-1-2005 | 2005-11-01 | French | Eurocode 5 - Design of timber structures - Part 1-1 : general - Common rules and rules for buildings - Modified by NF EN 1995-1-1/A1:200810 (P21-711-1/A1) |
| 469 | AFNOR NF EN 14662-1-2005 | 2005-11-01 | French | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : pumped sampling followed by thermal desorption and gas chromatography |
| 470 | AFNOR NF EN 12875-1-2005 | 2005-11-01 | French | Mechanical dishwashing resistance of ustensils - Part 1 : reference test method for domestic articles |
| 471 | AFNOR NF EN 3552-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy 2618A - Clad sheet and strip - 0,4 mm < or = a < or = 6 mm |
| 472 | AFNOR NF EN 50065-4-2/A2-2005 | 2005-11-01 | French | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz - Part 4-2 : Low voltage decoupling filters - Safety requirements |
| 473 | AFNOR NF EN 4202-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P6082- - T651 - Plate - 6 mm < a < or = 25 mm |
| 474 | AFNOR NF EN 4203-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P8090- - T89 - Sheet - 0,6 mm < or = a < or = 6 mm |
| 475 | AFNOR NF EN 4209-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2219- - T851 - Plate - 6 mm < a < or = 50 mm |
| 476 | AFNOR NF EN 4211-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2024- - T42 - Clad plate - 6 mm < a < or = 25 mm |
| 477 | AFNOR NF EN 4215-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P7175- - T651 - Plate - 6 mm < a < or = 80 mm |
| 478 | AFNOR NF EN 4247-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2024- - T42 - Plate - 6 mm < a < or 140 mm |
| 479 | AFNOR NF EN 4283-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P2219- - T87 - Plate - 6 mm < a < or = 40 mm |
| 480 | AFNOR NF EN 4286-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P8090- - T89 - Die forgings - a < or = 125 mm |
| 481 | AFNOR NF EN 4291-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P8090- - Forging stock |
| 482 | AFNOR NF EN 4292-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-R39002 - Forging stock |
| 483 | AFNOR NF EN 4313-2005 | 2005-11-01 | French | Aerospace series - Aluminium alloy AL-P6013- - T6 - Sheet and strip - 0,5 mm < or = a < or = 6 mm |
| 484 | AFNOR NF EN 13530-3/A1-2005 | 2005-11-01 | French | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 3 : operational requirements |
| 485 | AFNOR NF EN 12101-6-2005 | 2005-11-01 | French | Smoke and heat control systems - Part 6 : specifications for pressure differential systems - Kits |
| 486 | AFNOR NF EN ISO 9311-3-2005 | 2005-11-01 | French | Adhesives for thermoplastic piping systems - Part 3 : test method for the determination of resistance to internal pressure |
| 487 | AFNOR NF EN ISO 9300-2005 | 2005-11-01 | French | Measurement of gas flow by means of critical flow Venturi nozzles |
| 488 | AFNOR NF EN 50144-1-2005 | 2005-11-01 | French | Safety of hand-held electric motor operated tools - Part 1 : general requirements - Modified by NF EN 50144-1/A1:200512 (C75-300/A1),NF EN 50144-1/A2:200512 (C75-300/A2) |
| 489 | AFNOR NF EN ISO 3095-2005 | 2005-11-01 | French | Railway applications - Acoustics - Measurement of noise emitted by railbound vehicles |
| 490 | AFNOR NF EN 60335-2-92-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-92 : particular requirements for pedestrian-controlled mains-operated lawn scarifiers and aerators |
| 491 | AFNOR NF EN ISO 8339-2005 | 2005-11-01 | French | Building construction - Sealants - Determination of tensile properties (Extension to break) |
| 492 | AFNOR NF EN 60335-2-98-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-98 : particular requirements for humidifiers - Modified by NF EN 60335-2-98/A1:200512 (C73-898/A1),NF EN 60335-2-98/A2:200901 (C73-898/A2) |
| 493 | AFNOR NF EN 60335-2-99-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-99 : particular requirements for commercial electric hoods |
| 494 | AFNOR NF EN 60335-2-84-2005 | 2005-11-01 | French | Household and similar electrical appliances - Safety - Part 2-84 : particular requirements for toilets - Modified by NF EN 60335-2-84/A1:200809 (C73-884/A1) |
| 495 | AFNOR NF EN 60456-2005 | 2005-11-01 | French | Clothes washing machines for household use - Methods for measuring the performance - Modified by NF EN 60456/A11:200612 (C73-171/A11) |
| 496 | AFNOR NF EN 14449-2005 | 2005-10-01 | French | Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/Product standard |
| 497 | AFNOR NF EN 12289-2005 | 2005-10-01 | French | Advanced technical ceramics - Mechanical properties of ceramic composites at ambiant temperature - Determination of in-plane shear properties |
| 498 | AFNOR NF ISO 9136-1-2005 | 2005-10-01 | French | Abrasive grains - Determination of bulk density - Part 1 : macrogrits |
| 499 | AFNOR NF EN ISO 17249-2005 | 2005-10-01 | French | Safety footwear with resistance to chain saw cutting - Modified by NF EN ISO 17249/A1:200707 (S73-514/A1) |
| 500 | AFNOR NF EN 60336-2005 | 2005-10-01 | French | Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Characteristics of focal spots |
|