| Pos | standard Number | publication date | Language | Description |
| 1 | AFNOR NF EN 300396-2-2014 | 2014-10-24 | French | Terrestrial Trunked Radio (TETRA) - Technical requirements for direct mode operation (DMO) - Part 2: radio aspects (V1.4.1) |
| 2 | AFNOR NF EN 300396-1-2014 | 2014-10-24 | French | Terrestrial Trunked Radio (TETRA) - Technical requirements for direct mode operation (DMO) - Part 1 : general network design (V1.2.1) |
| 3 | AFNOR NF EN 300019-1-4-2014 | 2014-10-24 | French | Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4 : classification of environmental conditions - Stationary use at non-weatherprotected locations (V2.2.1) |
| 4 | AFNOR NF EN 300019-1-3-2014 | 2014-10-24 | French | Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunication equipment - Part 1-3 : classification of environmental conditions - Stationary use at weatherproted locations (V2.4-1) |
| 5 | AFNOR NF EN 327-2014 | 2014-10-17 | French | Heat exchangers - Forced convection air cooled refrigerant condensers - Test procedures for establishing performance |
| 6 | AFNOR NF EN ISO 16808-2014 | 2014-10-17 | French | Metallic materials- Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems |
| 7 | AFNOR NF P94-093-2014 | 2014-10-17 | French | Soils : investigation and testing - Determination of the compaction reference values of a soil type - Standard proctor test - Modified proctor test |
| 8 | AFNOR NF ISO 12913-1-2014 | 2014-10-17 | French | Acoustics - Soundscape - Part 1 : definition and conceptual framework |
| 9 | AFNOR NF ISO 11783-6-2014 | 2014-10-17 | French | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 6 : virtual terminal |
| 10 | AFNOR NF ISO 10766-2014 | 2014-10-17 | French | Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| 11 | AFNOR NF X30-443-2014 | 2014-10-17 | French | Waste - Laboratory determination of the coefficient of permeability of a saturated material - Flexible wall permeameter with constant hydraulic gradient |
| 12 | AFNOR NF ISO 7241-2014 | 2014-10-17 | French | Hydraulic fluid power - Part 1 : dimensions and requirements of quick-action couplings |
| 13 | AFNOR NF ISO 22262-2-2014 | 2014-10-17 | French | Air quality - Bulk materials - Part 2 : quantitative determination of asbestos by gravimetric and microscopical methods |
| 14 | AFNOR NF EN ISO 6974-5-2014 | 2014-10-17 | French | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5 : isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons |
| 15 | AFNOR NF EN 13001-3-2-2014 | 2014-10-17 | French | Cranes - General design - Part 3-2 : limit states and proof of competence of wire ropes in reeving systems |
| 16 | AFNOR NF EN ISO 11979-9/A1-2014 | 2014-10-17 | French | Ophthalmic implants - Intraocular lenses - Part 9 : multifocal intraocular lenses - Amendment 1 |
| 17 | AFNOR NF EN 13001-2-2014 | 2014-10-17 | French | Crane safety - General design - Part 2 : load actions |
| 18 | AFNOR NF EN 15502-2-2-2014 | 2014-10-17 | French | Gas-fired central heating boilers - Part 2-2 : specific standard for type B1 appliances |
| 19 | AFNOR NF EN ISO 80601-2-69-2014 | 2014-10-17 | French | Medical electrical equipment - Part 2-69 : particular requirements for basic safety and essential performance of oxygen concentrator equipment |
| 20 | AFNOR NF EN 302636-6-1-2014 | 2014-10-17 | French | Intelligent transport systems (ITS) - Vehicular communications - GeoNetworking - Part 6 : internet integration - Sub-part 1 : transmission of IPv6 packets over GeoNetworking protocols (V1.2.1) |
| 21 | AFNOR NF EN 16334-2014 | 2014-10-17 | French | Railway applications - Passenger Alarm System - System requirements |
| 22 | AFNOR NF EN 1021-2-2014 | 2014-10-17 | French | Furniture - Assessment of the ignitability of upholstered furniture - Part 2 : ignition source match flame equivalent |
| 23 | AFNOR NF EN 302217-3-2014 | 2014-10-17 | French | Fixed Radio Systems - Characteristics and requirements for point-to-point equipment and antennas - Part 3 : equipment operating in frequency bands where both frequency coordinated or uncoordinated deployment might be applied - Harmonized EN co |
| 24 | AFNOR NF EN 16575-2014 | 2014-10-17 | French | Bio-based products - Vocabulary |
| 25 | AFNOR NF D36-126-2014 | 2014-10-17 | French | Homogeneous internal diameter 12 mm rubber tubing for connecting pipeline gas-fired mobile appliances for commercial and industrial use, especially laboratory equipment in research and teaching |
| 26 | AFNOR NF ISO 2000-2014 | 2014-10-17 | French | Rubber, raw natural - Guidelines for the specification of technically specified rubber (TSR) |
| 27 | AFNOR NF EN 1021-1-2014 | 2014-10-17 | French | Furniture - Assessment of the ignitability of upholstered furniture - Part 1 : ignition source smouldering cigarette |
| 28 | AFNOR NF EN 16565-2014 | 2014-10-17 | French | Packaging - Flexible tube - Test method to determine the orientation of the flip-top cap |
| 29 | AFNOR NF EN ISO 6185-3-2014 | 2014-10-10 | French | Inflatable boats - Part 3 : boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| 30 | AFNOR NF ISO 2327-2014 | 2014-10-10 | French | Pneumatic handling appliances for loose bulk materials - Piping |
| 31 | AFNOR NF X30-474-2014 | 2014-10-10 | French | Household and related refuse - Forming and characterisation of a spot sample taken from a skip containing selectively colleted householr and related refuse |
| 32 | AFNOR NF X50-783-2014 | 2014-10-10 | French | Accessibility and integration of disabled people - Disability-friendly organizations - Requirements and recommandations for taking disabilities into account in organizations |
| 33 | AFNOR NF EN 60825-1-2014 | 2014-10-10 | French | Safety of laser products - Part 1 : equipment classification and requirements |
| 34 | AFNOR NF EN 328-2014 | 2014-10-10 | French | Heat exchangers - Forced convection unit air coolers for refrigeration - Test procedures for establishing the performance |
| 35 | AFNOR NF ISO 9361-1-2014 | 2014-10-10 | French | Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1 : dimensions of inserts without fixing hole |
| 36 | AFNOR NF EN ISO 12945-3-2014 | 2014-10-10 | French | Textiles - Determination of the fabric propensity to surface pilling, fuzzing or matting - Part 3 : random tumble pilling method |
| 37 | AFNOR NF ISO 16000-30-2014 | 2014-10-10 | French | Indoor air - Part 30 : sensory testing of indoor air |
| 38 | AFNOR NF ISO 14885-2014 | 2014-10-10 | French | Large Yachts - Diesel engines for main propulsion and essential auxiliaries - Safety requirements |
| 39 | AFNOR NF ISO 12715-2014 | 2014-10-10 | French | Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams |
| 40 | AFNOR NF ISO 17359-2014 | 2014-10-10 | French | Condition monitoring and diagnostics of machines - General guidelines |
| 41 | AFNOR NF EN 13451-5-2014 | 2014-10-10 | French | Swimming pool equipment - Part 5 : additional specific safety requirements and test methods for lane lines and dividing line |
| 42 | AFNOR XP S70-003-4-2014 | 2014-10-09 | French | Works operation nearby engineering networks - Part 4 : examples of specific clauses in works contracts |
| 43 | AFNOR XP P18-467-2014 | 2014-10-08 | French | Determination of fibre of density less than 1 of fresh concrete or mortar |
| 44 | AFNOR FD CEN/TR 16563-2014 | 2014-10-08 | French | Principles of the equivalent durability procedure |
| 45 | AFNOR XP CEN ISO/TS 29843-2-2014 | 2014-10-08 | French | Soil quality - Determination of soil microbial diversity - Part 2 : method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method |
| 46 | AFNOR NF EN ISO 16251-1-2014 | 2014-10-03 | French | Acoustics - Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up - Part 1 : heavyweight compact floor |
| 47 | AFNOR NF EN 12518-2014 | 2014-10-03 | French | Chemicals used for treatment of water intended for human consumption - High-calcium lime |
| 48 | AFNOR NF EN 12326-1-2014 | 2014-10-03 | French | Slate and stone discontinuous roofing and external cladding - Part 1 : specifications for slave and carbonate slate |
| 49 | AFNOR NF ISO 13629-2-2014 | 2014-10-03 | French | Textiles - Determination of antifungal activity of textile products - Part 2 : plate count method |
| 50 | AFNOR XP X30-484-2014 | 2014-10-03 | French | Household and related refuse - Caracterisation of household and related refuse contained in a skip for bulky waste |
| 51 | AFNOR NF EN 1017-2014 | 2014-10-03 | French | Chemicals used for treatment of water intended for human consumption - Half-burnt dolomite |
| 52 | AFNOR NF EN 60317-51-2014 | 2014-10-03 | French | Specifications for particular types of winding wires - Part 51 : solderable polyurethane enamelled round copper wire, class 180 |
| 53 | AFNOR NF EN 60317-53-2014 | 2014-10-03 | French | Specifications for particular types of winding wires - Part 53 : aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 |
| 54 | AFNOR NF EN ISO 18082-2014 | 2014-10-03 | French | Anaesthetic and respiratory equipment - Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases |
| 55 | AFNOR NF EN 927-2-2014 | 2014-10-03 | French | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2 : performance specification |
| 56 | AFNOR NF EN ISO 17351-2014 | 2014-10-03 | French | Packaging - Braille on packaging for medicinal products |
| 57 | AFNOR NF H13-000-2014 | 2014-10-03 | French | Packagings made of corrugated and solid fibreboard - Vocabulary |
| 58 | AFNOR NF EN ISO 3218-2014 | 2014-10-03 | French | Essential oils - Principles of nomenclature |
| 59 | AFNOR NF DTU 52.2 P1-2/A1-2014 | 2014-10-03 | French | Building works - Ceramic and similar tiles fixing with adhesives - Nnatural stones - Part 1-2 : general criteria for material selection - Amendment 1 |
| 60 | AFNOR NF EN 50569-2014 | 2014-10-03 | French | Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors |
| 61 | AFNOR NF EN ISO 3949-2014 | 2014-10-03 | French | Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification |
| 62 | AFNOR NF EN ISO 4017-2014 | 2014-10-03 | French | Fasteners - Hexagon head screws - Product grades A and B |
| 63 | AFNOR NF EN 50570-2014 | 2014-10-03 | French | Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers |
| 64 | AFNOR NF X41-580-11-2014 | 2014-10-03 | French | Wood preservatives - Physicochemical testing - Part 11 : low stability testing |
| 65 | AFNOR NF X41-580-10-2014 | 2014-10-03 | French | Wood preservatives - Physicochemical testing - Part 10 : storage stability testing |
| 66 | AFNOR NF X41-580-1-2014 | 2014-10-03 | French | Wood preservatives - Physicochemical testing - Part 1 : physicochemical characteristics |
| 67 | AFNOR NF X40-101-2014 | 2014-10-03 | French | Wood preservatives - Identification criteria |
| 68 | AFNOR NF V03-166-2014 | 2014-10-03 | French | Foodstuffs - Determination of T-2 and HT-2 toxins in cereals and cereal-based products - Determination by LC-MS/MS after purification using SPE cartridges |
| 69 | AFNOR NF DTU 52.2 P1-1-3/A1-2014 | 2014-10-03 | French | Building works - Ceramic and similar tiles fixing with adhesives - Natural stones - Part 1-1-3 : contract bill of technical model clauses for inside and outside floors - Amendment 1 |
| 70 | AFNOR NF T70-513-2014 | 2014-10-03 | French | Energetic materials for defense - Safety, vulnerability - Fuel fire |
| 71 | AFNOR NF T70-512-2014 | 2014-10-03 | French | Energetic materials for defense - Safety, vulnerability - 250 g spherical fragment impact |
| 72 | AFNOR NF T70-510-2014 | 2014-10-03 | French | Energetic materials for defense - Safety, vulnerability - Crushing with a diameter 81 mm steel cylinder |
| 73 | AFNOR NF T70-508-2014 | 2014-10-03 | French | Energetic materials for defense - Safety, vulnerability - Deflagration to detonation transition test |
| 74 | AFNOR NF T70-364-2014 | 2014-10-03 | French | Energetic materials for defense - Physical-chemical analysis and properties - Implementation ability by compression of powdered explosives |
| 75 | AFNOR NF T70-313-2014 | 2014-10-03 | French | Energetic materials for defense - Physical-chemical analysis and properties - Coefficient of linear thermal expansion by direct measurement |
| 76 | AFNOR NF T60-157-2014 | 2014-10-03 | French | Petroleum products -Lubricationg oils - Dertermination of the insoluble mattters in used lubricating oils |
| 77 | AFNOR NF T60-156-2014 | 2014-10-03 | French | Petroleum products - Lubricating oils - Determination of the demulsibility characteristics of lubricating oils |
| 78 | AFNOR NF T46-047-2014 | 2014-10-03 | French | Rubber and rubber products - Determination of composition of vulcanizates and uncured compounds by thermogravimetry |
| 79 | AFNOR NF EN 61121-2014 | 2014-10-03 | French | Tumble dryers for household use - Methods for measuring the performance |
| 80 | AFNOR NF EN 16500-2014 | 2014-10-03 | French | Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements |
| 81 | AFNOR NF ISO 1537-2014 | 2014-10-03 | French | Continuous mechanical handling equipment for loose bulk materials - Troughed belt conveyors (other than portable conveyors) - Idlers |
| 82 | AFNOR NF EN 62149-3-2014 | 2014-10-03 | French | Fibre optic active components and devices - Performance standards - Part 3 : modulator-integrated laser diode transmitters for 2,5-Gbit/s to 40-Gbit/s fibre optic transmission systems |
| 83 | AFNOR NF DTU 52.2 P2/A1-2014 | 2014-10-03 | French | Building works - Ceramic and similar tiles fixing with adhesives - Natural stones - Part 2 : contract bill of special administrative model clauses - Amendment 1 |
| 84 | AFNOR NF EN 62196-2/A12-2014 | 2014-10-03 | French | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2 : dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
| 85 | AFNOR NF F14-005-2014 | 2014-10-03 | French | Railway rolling stock - Signalling equipment for rail vehicles - Removable signalling - Overall signal |
| 86 | AFNOR NF DTU 52.2 P1-1-2/A1-2014 | 2014-10-03 | French | Building works - Ceramics and similars tiles fixing with adhesives - Natural stones - Part 1-1-2 : contract bill of technical model clauses fos outside walls - Amendment 1 |
| 87 | AFNOR NF DTU 52.2 P1-1-1/A1-2014 | 2014-10-03 | French | Building works - Ceramic and similar tiles fixing with adhesives - natural stones - Part 1-1-1 : contract bill of technical model clauses for inside walls - Amendment 1 |
| 88 | AFNOR NF X20-702-2014 | 2014-10-03 | French | Chemical breath tester - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods |
| 89 | AFNOR NF EN ISO 3493-2014 | 2014-10-03 | French | Vanilla - Vocabulary |
| 90 | AFNOR NF EN 15628-2014 | 2014-10-03 | French | Maintenance - Qualification of maintenance personnel |
| 91 | AFNOR NF EN ISO 9453-2014 | 2014-10-03 | French | Soft solder alloys - Chemical compositions and forms |
| 92 | AFNOR NF P03-002-2014 | 2014-10-03 | French | Private works contracts - Typical specifications - General conditions of contract for civil engeering works governed by private works contracts |
| 93 | AFNOR NF EN 62337-2014 | 2014-10-03 | French | Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones |
| 94 | AFNOR NF EN ISO 11979-10/A1-2014 | 2014-10-03 | French | Ophthalmic implants - Intraocular lenses - Part 10 : phakic intraocular lenses - Amendment 1 |
| 95 | AFNOR NF P98-121-2014 | 2014-10-03 | French | Base Course - Grave emulsion - Bound granular material - Definition - Classification - Characteristics - Laying |
| 96 | AFNOR NF ISO 13612-1-2014 | 2014-10-03 | French | Heating and cooling systems in buildings - Method for calculation of the system performance and system design for heat pump systems - Part 1 : design and dimensioning |
| 97 | AFNOR FD E01-008-2014 | 2014-10-01 | French | Mechanical products - Environmental data |
| 98 | AFNOR CWA 16814-2014 | 2014-10-01 | French | Nutritionally correct low-cost food for people at risk of poverty - General, specific requirements and labelling of CHANCE food |
| 99 | AFNOR FD CEN ISO/TR 6579-3-2014 | 2014-10-01 | French | Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3 : guidelines for sertyping of Salmonella spp. |
| 100 | AFNOR XP ISO/TS 14071-2014 | 2014-10-01 | French | Environmental management - Life cycle assessment - Critical review processes and reviewer competencies : additional requirements and guidelines to ISO 14044:2006 |
| 101 | AFNOR XP CEN/TS 15548-1-2014 | 2014-10-01 | French | Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: measurements at elevated temperatures from 100 °C to 850 °C |
| 102 | AFNOR XP ISO/TS 17758-2014 | 2014-10-01 | French | Instant dried milk - Determination of the dispersibility and wettability |
| 103 | AFNOR NF E25-460-2014 | 2014-09-27 | French | Fasteners - Self locking counter nuts |
| 104 | AFNOR NF ISO 514-2014 | 2014-09-27 | French | Turning tools with carbide tips - Internal tools |
| 105 | AFNOR NF EN 62325-301-2014 | 2014-09-27 | French | Framework for energy market communications - Part 301 : common Information Model (CIM) extensions for markets |
| 106 | AFNOR NF ISO 243-2014 | 2014-09-27 | French | Turning tools with carbide tips - External tools |
| 107 | AFNOR NF ISO 242-2014 | 2014-09-27 | French | Carbide tips for brazing on turning tools |
| 108 | AFNOR NF G53-003-2014 | 2014-09-27 | French | Leathers and Hides - Raw hides of wool sheap - Designation - Presentation |
| 109 | AFNOR NF EN 60794-1-2-2014 | 2014-09-27 | French | Optical fibre cables - Part 1-2 : generic specification - Cross reference table for optical cable test procedures |
| 110 | AFNOR NF EN 50407-3-2014 | 2014-09-27 | French | Multi-pair cables used in high bit rate digital access telecommunication networks - Part 3 : indoor multi-pair/quad riser cables up to 100 MHz for maximum length of connection 100 m supporting universal services, xDSL and applications up to 10 |
| 111 | AFNOR NF A02-053-2014 | 2014-09-27 | French | Heat treatment - Control of quality |
| 112 | AFNOR NF EN 61300-2-35-2014 | 2014-09-27 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35 : tests - Cable nutation |
| 113 | AFNOR NF EN 62522-2014 | 2014-09-27 | French | Calibration of tuneable laser sources |
| 114 | AFNOR NF EN 61290-10-5-2014 | 2014-09-27 | French | Optical amplifiers - Test methods - Part 10-5 : multichannel parameters - Distributed Raman amplifier gain and noise figure |
| 115 | AFNOR NF EN 62325-451-2-2014 | 2014-09-27 | French | Framework for energy market communications - Part 451-2 : scheduling business process and contextual models for CIM European market |
| 116 | AFNOR NF ISO 22514-1-2014 | 2014-09-27 | French | Statistical methods in process management - Capability and performance - Part 1 : general principles and concepts |
| 117 | AFNOR NF EN 326-2/IN1-2014 | 2014-09-27 | French | Wood-based panels - Sampling, cutting and inspection - Part 2 : initial type testing and factory production control |
| 118 | AFNOR NF EN 1809-2014 | 2014-09-27 | French | Diving equipment - Buoyancy compensators - Functional and safety requirements, test methods |
| 119 | AFNOR NF EN 1176-11-2014 | 2014-09-27 | French | Playground equipment and surfacing - Part 11 : additional specific safety requirements and test methods for spatial network |
| 120 | AFNOR NF ISO 12647-1-2014 | 2014-09-27 | French | Graphic technology - Process control for the production of half-tone colour separations, proof and production prints |
| 121 | AFNOR NF EN 694-2014 | 2014-09-27 | French | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| 122 | AFNOR NF ISO 3302-1-2014 | 2014-09-27 | French | Rubber - Tolerances for products - Part 1 : dimensional tolerances |
| 123 | AFNOR NF EN 61850-3-2014 | 2014-09-27 | French | Communication networks and systems for power utility automation - Part 3 : general requirements |
| 124 | AFNOR NF EN 326-2+A1-2014 | 2014-09-27 | French | Wood-based panels - Sampling, cutting and inspection - Part 2 : initial type testing and factory production control |
| 125 | AFNOR NF EN 81-50-2014 | 2014-09-20 | French | Safety rules for the construction and installation of lifts - Examinations and tests - Part 50 : design rules, calculations, examinations and tests of lift components |
| 126 | AFNOR NF EN 12493+A1-2014 | 2014-09-20 | French | LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
| 127 | AFNOR NF EN 81-20-2014 | 2014-09-20 | French | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20 : passenger and goods passenger lifts |
| 128 | AFNOR NF EN ISO 12215-5/A1-2014 | 2014-09-20 | French | Small craft - Hull construction and scantlings - Part 5 : design pressures for monohulls, design stresses, scantlings determination - Amendment 1 |
| 129 | AFNOR NF EN ISO 15614-12-2014 | 2014-09-20 | French | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12 : spot, seam and projection welding |
| 130 | AFNOR NF EN 61804-3-2014 | 2014-09-20 | French | Function Blocks (FB) for process control - Part 3 : electronic device description language (EDDL) |
| 131 | AFNOR NF EN 415-1-2014 | 2014-09-20 | French | Safety of packaging machines - Part 1 : terminology and classification of packaging machines and associated equipment |
| 132 | AFNOR NF EN 12493/IN1-2014 | 2014-09-20 | French | LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture |
| 133 | AFNOR NF EN ISO 4895-2014 | 2014-09-20 | French | Plastics - Liquid epoxy resins - Determination of tendency to crystallize |
| 134 | AFNOR NF EN 60749-26-2014 | 2014-09-20 | French | Semiconductor devices - Mechanical and climatic test methods - Part 26 : electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) |
| 135 | AFNOR NF T70-525-2014 | 2014-09-20 | French | Defense energitic materials - Safety, vulnerability - Fire behaviour under confined conditions |
| 136 | AFNOR NF T70-515-2014 | 2014-09-20 | French | Energetic materials for defense - Safety, vulnerability - 3,3 °C/h very slow heating |
| 137 | AFNOR NF EN 54-3-2014 | 2014-09-20 | French | Fire detection and fire alarm systems - Part 3 : fire alarm devices - Sounders |
| 138 | AFNOR NF H50-014-2014 | 2014-09-20 | French | Packaging - Reusable box pallets - Specifications and test program |
| 139 | AFNOR NF H13-007-2014 | 2014-09-20 | French | Cardboard packaging - Apple/pear boxes - Specifications |
| 140 | AFNOR NF V45-066-2014 | 2014-09-20 | French | Processed products from fisheries and aquaculture - Salted anchovies and salted anchovy based preparations - Specifications |
| 141 | AFNOR NF H00-313-2014 | 2014-09-20 | French | Flexible packaging for the protection of items against electrostatic discharges and against electromagnetic fields - Characteristics and test methods |
| 142 | AFNOR NF T70-530-2014 | 2014-09-20 | French | Energetic materials for defense - Safety, vulnerability - 12,7 mm bullet impact test |
| 143 | AFNOR NF T70-514-2014 | 2014-09-20 | French | Energetic materials for defense - Safety, vulnerability - 5 °C/min slow heating |
| 144 | AFNOR NF EN ISO 3385-2014 | 2014-09-20 | French | Flexible cellular polymeric materials - Determination of fatigue by constant-load pounding |
| 145 | AFNOR NF EN 61987-11-2014 | 2014-09-20 | French | Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 11 : lists of properties (LOP) of measuring equipment for electronic data exchange - Generic structures |
| 146 | AFNOR NF T70-545-2014 | 2014-09-20 | French | Energetic materials for defense - Light fragment impact |
| 147 | AFNOR NF EN ISO 3166-1-2014 | 2014-09-20 | French | Codes for the representation of names of countries and their subdivisions - Part 1 : country codes |
| 148 | AFNOR NF EN ISO 2759-2014 | 2014-09-20 | French | Board - Determination of bursting strength |
| 149 | AFNOR NF EN 62149-9-2014 | 2014-09-20 | French | Fibre optic active components and devices - Performance standards - Part 9 : seeded reflective semiconductor optical amplifier transceivers |
| 150 | AFNOR NF T70-716-2014 | 2014-09-20 | French | TNT equivalents by blast effect of explosives |
| 151 | AFNOR NF EN 50343-2014 | 2014-09-20 | French | Railway applications - Rolling stock - Rules for installation of cabling |
| 152 | AFNOR NF EN 62439-3-2014 | 2014-09-20 | French | Industrial communication networks - High availability automation networks - Part 3 : parallel redundancy protocol (PRP) and high-availability seamless redundancy (HSR) |
| 153 | AFNOR NF ISO 20283-4-2014 | 2014-09-20 | French | Mechanical vibration - Measurement of vibration on ships - Part 4 : measurement and evaluation of vibration of the ship propulsion machinery - Modified by NF ISO 20283-4/A1:201410 (E90-972-4/A1) |
| 154 | AFNOR NF EN ISO 11358-1-2014 | 2014-09-20 | French | Plastics - Thermogravimetry (TG) of polymers - Part 1 : general principles |
| 155 | AFNOR NF EN 61300-3-48-2014 | 2014-09-20 | French | Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48 : examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule multi-fibre connectors |
| 156 | AFNOR NF EN 61347-2-1/A2-2014 | 2014-09-20 | French | Lamp controlgear - Part 2-1 : particular requirements for starting devices (other than glow starters) |
| 157 | AFNOR NF EN 61280-2-12-2014 | 2014-09-20 | French | Fibre optic communication subsystem test procedures - Part 2-12 : digital systems - Measuring eye diagrams and Q-factor using a software triggering technique for transmission signal quality assessment |
| 158 | AFNOR NF EN 62343-3-3-2014 | 2014-09-20 | French | Dynamic modules - Part 3-3 : performance specification templates - Wavelength selective switches |
| 159 | AFNOR FD A81-012-2014 | 2014-09-17 | French | Welding consumables - Shielding gas mixtures for fusion welding and allied processes - Operators manual for welding procedures |
| 160 | AFNOR FD T90-465-1-2014 | 2014-09-17 | French | Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 1 : references, definition and general principles |
| 161 | AFNOR FD ISO/TR 37137-2014 | 2014-09-17 | French | Cardiovascular biological evaluation of medical devices - Guidance for absorbable implants |
| 162 | AFNOR AC X52-100-2014 | 2014-09-17 | French | Performance evaluation of perception systems applied to security and safety of goods and peaople |
| 163 | AFNOR NF EN 62572-3-2014 | 2014-09-13 | French | Fibre optic active components and devices - Reliability standards - Part 3 : laser modules used for telecommunication |
| 164 | AFNOR NF EN 62337-2014 | 2014-09-13 | French | Commissioning of electrical, instrumentation and control systems in the process industry - Specific phases and milestones |
| 165 | AFNOR NF EN ISO 11607-2/A1-2014 | 2014-09-13 | French | Packaging for terminally sterilized medical devices - Part 2 : validation requirements for forming, sealing and assembly processes - Amendment 1 |
| 166 | AFNOR NF EN ISO 11607-1/A1-2014 | 2014-09-13 | French | Packaging for terminally sterilized medical devices - Part 1 : requirements for materials, sterile barrier systems and packaging systems - Amendment 1 |
| 167 | AFNOR NF EN ISO 11499-2014 | 2014-09-13 | French | Dentistry - Single-use cartridges for local anaesthetics |
| 168 | AFNOR NF EN ISO 11403-3-2014 | 2014-09-13 | French | Plastics - Acquisition and presentation of comparable multipoint data - Part 3 : environmental influences on properties |
| 169 | AFNOR NF EN 60695-2-11-2014 | 2014-09-13 | French | Fire hazard testing - Part -2-11 : glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| 170 | AFNOR NF EN 61280-1-1-2014 | 2014-09-13 | French | Fibre optic communication subsystem basic test procedures - Part 1-1 : test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| 171 | AFNOR NF EN ISO 8030-2014 | 2014-09-13 | French | Rubber and plastics hoses - Method of test for flammability |
| 172 | AFNOR NF EN 60061-1/A50-2014 | 2014-09-13 | French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 : lamp caps |
| 173 | AFNOR NF EN 60601-2-34-2014 | 2014-09-13 | French | Medical electrical equipment - Part 2-34 : particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
| 174 | AFNOR NF ISO 11485-2-2014 | 2014-09-13 | French | Glass in building - Curved glass - Part 2 : quality requirements |
| 175 | AFNOR NF EN ISO 16443-2014 | 2014-09-13 | French | Dentistry - Vocabulary for dental implants systems and related procedure |
| 176 | AFNOR NF ISO 2631-4/A1-2014 | 2014-09-13 | French | Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4 : guidelines for the evaluation of the effetcts of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
| 177 | AFNOR NF EN ISO 16000-32-2014 | 2014-09-13 | French | Indoor air - Part 32 : investigation of buildings for the occurrence of pollutants |
| 178 | AFNOR NF EN 61858-2-2014 | 2014-09-13 | French | Electrical insulation systems - Thermal evaluation of modifications to an established electrical insulation system (EIS) - Part 2 : form-wound EIS |
| 179 | AFNOR NF EN ISO 14246-2014 | 2014-09-13 | French | Gas cylinders - Cylinder valves - Manufacturing tests and examinations |
| 180 | AFNOR NF EN 175300-2014 | 2014-09-13 | French | Sectional specification : rectangular connectors for frequencies below 3 MHz |
| 181 | AFNOR NF ISO 10816-8-2014 | 2014-09-13 | French | Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 8 : reciprocating compressor systems |
| 182 | AFNOR NF ISO 11485-1-2014 | 2014-09-13 | French | Glass in building - Curved glass - Part 1 : terminology and definitions |
| 183 | AFNOR NF EN 60255-149-2014 | 2014-09-13 | French | Measuring relays and protection equipment - Part 149 : functional requirements for thermal electrical relays |
| 184 | AFNOR NF EN 62281-2014 | 2014-09-13 | French | Safety of primary and secondary lithium cells and batteries during transport |
| 185 | AFNOR NF EN 50131-10-2014 | 2014-09-13 | French | Alarm systems - Intrusion and hold-up systems - Part 10 : application specific requirements for supervised premises transceiver (SPT) |
| 186 | AFNOR NF EN 16486-2014 | 2014-09-13 | French | Machines for compacting waste materials or recyclable fractions - Compactors - Safety requirements |
| 187 | AFNOR NF C33-212-2014 | 2014-09-13 | French | Insulated cables and their accessories for power systems - Aerodrome lighting primary circuit cables - Rated voltage Uo/U(Um) = 1/1(1,2) kV |
| 188 | AFNOR NF C33-224-2014 | 2014-09-13 | French | Insulated cables and their accessories for power Systems - Aerodrome lighting primary circuit cables - Rated voltage Uo/U(Um) = 3,6/6(7,2) kV |
| 189 | AFNOR NF C33-225-2014 | 2014-09-13 | French | Insulated cables and their accessories for power systems - Aerodrome lighting primary circuit cables - Rated voltage Uo/U(Um) = 6/10(12) kV |
| 190 | AFNOR NF D27-402-2014 | 2014-09-13 | French | Letter boxes others than those with large opening - Indoor installations |
| 191 | AFNOR NF ISO 2631-4-2014 | 2014-09-13 | French | Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4 : guidlines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems - |
| 192 | AFNOR NF ISO 2631-1/A1-2014 | 2014-09-13 | French | Mechanical vibration and schok - Evaluation of human exposure to whole-body vibration - Part 1 : general requirements - Amendment 1 |
| 193 | AFNOR NF ISO 2631-1-2014 | 2014-09-13 | French | Mechanical vibration and shock - Evaluation of human exposure to wholeby vibration - Part 1 : general requirements - Modified by NF ISO 2631-1/A1:201409 (E90-631-1/A1) |
| 194 | AFNOR NF D27-407-2014 | 2014-09-13 | French | Letter boxes with reduced capacity and with large opening for indoor installation - Requirements and testing |
| 195 | AFNOR NF D27-408-2014 | 2014-09-13 | French | Letter boxes with reduced capacity and with large opening for outdoor installation - Requirements and testing |
| 196 | AFNOR NF ISO 730/A1-2014 | 2014-09-13 | French | Agricultural wheeled tractors - Rear-mounted three-point linkage - Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 - Amendment 1 |
| 197 | AFNOR NF EN ISO 5555/A1-2014 | 2014-09-13 | French | Animal and vegetable fats and oils - Sampling - Amendment 1 : flexitanks |
| 198 | AFNOR NF EN ISO 5164-2014 | 2014-09-13 | French | Petroleum products - Determination of knock characteristics of motor fuels - Research method |
| 199 | AFNOR NF EN ISO 5163-2014 | 2014-09-13 | French | Petroleum products - Determination of knock characteristics of motor and aviation fuels - Motor method |
| 200 | AFNOR NF EN 302636-1-2014 | 2014-09-13 | French | Intelligent Transport Systems (ITS) - Vehicular Communications - GeoNetworking - Part 1 : Requirements (V1.2.1) |
| 201 | AFNOR NF EN 62271-211-2014 | 2014-09-13 | French | High-voltage switchgear and controlgear - Part 211 : direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| 202 | AFNOR NF EN 62271-201-2014 | 2014-09-13 | French | High-voltage switchgear and controlgear - Part 201 : AC solid-insulation enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV |
| 203 | AFNOR NF EN 62149-8-2014 | 2014-09-13 | French | Fibre optic active components and devices - Performance standard - Part 8 : seeded reflective semiconductor optical amplifier devices |
| 204 | AFNOR NF EN 60871-4-2014 | 2014-09-13 | French | Shunt capacitors for AC power systems having a rated voltage above 1 000 V - Part 4 : internal fuses |
| 205 | AFNOR NF EN 60794-1-20-2014 | 2014-09-13 | French | Optical fibre cables - Part 1-20 : generic specification - Basic optical cable test procedures - General and Definitions |
| 206 | AFNOR NF ISO 492-2014 | 2014-09-06 | French | Rolling bearings - Radial bearings - Dimensional and geometrical tolerances |
| 207 | AFNOR NF DTU 36.3-2014 | 2014-09-06 | French | Building works - Timber stairs and associated guar-drails - Part 1-1 : contract bill of technical model clauses - Part 1-2 : general criteria for the selection of materials - Part 2 : contract bill of special administrative model clauses (CCS) |
| 208 | AFNOR NF DTU 36.3 P1-2-2014 | 2014-09-06 | French | Building works - Timber stairs and associated guar-drails - Part 1-2 : general criteria for the selection of materials |
| 209 | AFNOR NF DTU 36.3 P3-2014 | 2014-09-06 | French | Building works - Timber stairs and associated guard-rails - Part 3 : design requirements |
| 210 | AFNOR NF DTU 36.3 P2-2014 | 2014-09-06 | French | Building works - Timber stairs and associated guar-drails - Part 2 : contract bill of special administrative model clauses (CCS) |
| 211 | AFNOR NF DTU 36.3 P1-1-2014 | 2014-09-06 | French | Building works - Timber stairs and associated guar-drails - Part 1-1 : contract bill of technical model clauses |
| 212 | AFNOR NF ISO 199-2014 | 2014-09-06 | French | Rolling bearings - Thrust bearings - Geometrical product specification (GPS) and tolerances values |
| 213 | AFNOR NF EN 129102/A1-2014 | 2014-09-06 | French | Blank detail specification : wirewound surface mounting inductors of assessd quality - Assessment level P |
| 214 | AFNOR NF EN 129101/A2-2014 | 2014-09-06 | French | Blank detail specification : wirwound surface mounting inductors of assessed quality - Assessment level E |
| 215 | AFNOR NF EN 129101/A1-2014 | 2014-09-06 | French | Blank detail specification : wirewound surface mounting inductors of assessed quality : assessment level E |
| 216 | AFNOR NF EN 123500/A2-2014 | 2014-09-06 | French | Sectional specification : flexible printed boards with through connections |
| 217 | AFNOR NF EN 129100/A1-2014 | 2014-09-06 | French | Sectional specification : wirewound surface mounting inductors |
| 218 | AFNOR NF ISO 16678-2014 | 2014-09-06 | French | Guidelines for interoperable object identification and related authentication systems to deter counterfeiting and illicit trade |
| 219 | AFNOR NF EN ISO 10297-2014 | 2014-09-06 | French | Gas cylinders - Cylinder valves - Specification and type testing |
| 220 | AFNOR NF ISO/CEI 25051-2014 | 2014-09-06 | French | Software engineering - Systems and software quality requirements and evaluation (SQuaRE) - Requirements for quality of ready to use sofftware product (RUSP) and instructions for testing |
| 221 | AFNOR NF EN 123300/A1-2014 | 2014-09-06 | French | Sectional specification : multilayer printed boards |
| 222 | AFNOR NF EN 129000/A1-2014 | 2014-09-06 | French | Generic specification : fixed RF wound indutors |
| 223 | AFNOR NF EN ISO 9875-2014 | 2014-09-06 | French | Ships and marine technology - Marine echo-sounding equipment |
| 224 | AFNOR NF EN 123100/A1-2014 | 2014-09-06 | French | Sectional specification : single and double-sided printed boards with plain holes |
| 225 | AFNOR NF EN 123400/A2-2014 | 2014-09-06 | French | Sectional specification : flexible printed boards without through connections |
| 226 | AFNOR NF EN 2043-2014 | 2014-09-06 | French | Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings) |
| 227 | AFNOR NF EN 140200/A1-2014 | 2014-09-06 | French | Sectional specification : fixed power resistors |
| 228 | AFNOR NF EN 129201/A1-2014 | 2014-09-06 | French | Blank detail specification : wirewound inductors with ceramic or ferrite core - Assessment level E |
| 229 | AFNOR NF EN 129200/A1-2014 | 2014-09-06 | French | Sectional specification : fixed inductors with ceramic or ferrite core wound with copper wirte for RF circuits |
| 230 | AFNOR NF EN 1487-2014 | 2014-09-06 | French | Building valves - Hydraulic safety groups - Tests and requirements |
| 231 | AFNOR NF EN 60079-31-2014 | 2014-09-06 | French | Explosive atmospheres - Part 31 : equipment dust ignition protection by enclosure "t" |
| 232 | AFNOR XP CEN/TS 16700-2014 | 2014-09-03 | French | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate |
| 233 | AFNOR XP C32-322-2014 | 2014-09-03 | French | Insulated cables and flexible cords for installations. Cross-linked polyethylene insulated cables covered with a polyvinyl chloride sheath, with a metallic armour - Series U-1000 RVFV and U-1000 ARVFV |
| 234 | AFNOR XP C32-111-2014 | 2014-09-03 | French | Insulated cables and flexible cords for installations - Rigid cross-linked polyethylene insulated cables - Series U-1000 RGPFV and U-1000 ARGPFV |
| 235 | AFNOR XP P98-783-1-2014 | 2014-09-03 | French | Road maintenance equipment and products - Winter maintenance and road service area maintenance equipment - Part 1 : guide tp the training procedure of operators of winter maintenance equipment |
| 236 | AFNOR XP C32-321-2014 | 2014-09-03 | French | Insulated cables and conductors for installations - Rigid cross-linked polyethylene insulated cables covered with a polyvinylchloride sheath - Series U-1000 R2V and U-1000 AR2V |
| 237 | AFNOR XP CEN/TS 16677-2014 | 2014-09-03 | French | Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release |
| 238 | AFNOR FD X30-434-2014 | 2014-09-03 | French | Household and related refuse - Analysis of the composition of a bale of paper and board packaging from a waste sorting centre |
| 239 | AFNOR GA P18-902-2014 | 2014-09-03 | French | Guide of application - Products and systems for the protection and repair of concrete structures - Recommendations for the selection of surface protection systems for concrete intended for the works of civil engineering |
| 240 | AFNOR FD E01-001-2014 | 2014-09-03 | French | Social responsability of companies - Approach to support strategy and efficiency of SMEs in the mechnical field |
| 241 | AFNOR FD X30-468-2014 | 2014-09-03 | French | Household and related refuse - Analysis of the composition of a batch of newspapers, journals and magazines |
| 242 | AFNOR CWA 16374-46-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 46 : XFS MIB Device Specific Definitions Barcode Reader Device Class MIB 3.20 |
| 243 | AFNOR CWA 16374-44-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 44 : XFS MIB Application Management MIB 3.20 |
| 244 | AFNOR CWA 16374-40-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 40 : XFS MIB Device Specific Definitions Card Embossing Unit Device Class MIB 3.20 |
| 245 | AFNOR CWA 16374-36-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 36 : XFS MIB Device Specific Definitions Text Terminal Unit Device Class MIB 3.20 |
| 246 | AFNOR CWA 16374-45-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 45 : XFS MIB Device Specific Definitions Card Dispenser Device Class MIB 3.20 |
| 247 | AFNOR CWA 16374-39-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 39 : XFS MIB Device Specific Definitions Alarm Device Class MIB 3.20 |
| 248 | AFNOR CWA 16799-2014 | 2014-09-01 | French | Validation of computational solid mechanics models |
| 249 | AFNOR CWA 16374-47-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 47 : XFS MIB Device Specific Definitions Item Processing Module Device Class MIB Version 3.20 |
| 250 | AFNOR CWA 16374-41-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 41 : XFS MIB Device Specific Definitions Cash-In Module Device Class MIB 3.20 |
| 251 | AFNOR CWA 16374-38-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 38 : XFS MIB Device Specific Definitions Camera Device Class MIB 3.20 |
| 252 | AFNOR CWA 16374-37-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 37 : XFS MIB Device Specific Definitions Sensors and Indicators Unit Device Class MIB 3.20 |
| 253 | AFNOR CWA 16374-35-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 35 : XFS MIB Device Specific Definitions Depository Device Class MIB 3.20 |
| 254 | AFNOR CWA 16374-43-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 43 : XFS MIB Device Specific Definitions Vendor Dependent Mode Class MIB 3.20 |
| 255 | AFNOR CWA 16374-34-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 34 : XFS MIB Device Specific Definitions Check Reader/Scanner Device Class MIB 3.20 |
| 256 | AFNOR CWA 16374-30-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 30 : XFS MIB Device Specific Definitions Printer Device Class MIB 3.20 |
| 257 | AFNOR CWA 16374-31-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 31 : XFS MIB Device Specific Definitions Identification Card Device Class MIB 3.20 |
| 258 | AFNOR CWA 16374-29-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 29 : XFS MIB Architecture and SNMP Extensions MIB 3.20 |
| 259 | AFNOR CWA 16374-32-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 32 : XFS MIB Device Specific Definitions Cash Dispenser Device Class MIB 3.20 |
| 260 | AFNOR CWA 16374-33-2014 | 2014-09-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.20 - Part 33 : XFS MIB Device Specific Definitions PIN Keypad Device Class MIB 3.20 |
| 261 | AFNOR NF ISO 10227-2014 | 2014-08-30 | French | Human/human surrogate impact (single schock) testing and evaluation - Guidance on technical aspects |
| 262 | AFNOR NF EN 4507-2014 | 2014-08-30 | French | Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water extractable matter |
| 263 | AFNOR NF EN 130101-2014 | 2014-08-30 | French | Blank detail specification : fixed polyethylene-terphtalate film dielectric metal foil capacitors for direct current - Assessment level E |
| 264 | AFNOR NF EN 130100-2014 | 2014-08-30 | French | Sectional specification : fixed polyethylene-terephtalae film dielectric metal foil capacitors for direct current |
| 265 | AFNOR NF EN 12312-14-2014 | 2014-08-30 | French | Aircraft ground support equipment - Specific requirements - Part 14 : disabled/incapacitated passenger boarding vehicles |
| 266 | AFNOR NF EN 129201-2014 | 2014-08-30 | French | Blank detail specification : wirewound inductors with ceramic or ferrite core - Assessment level E - Modified by NF EN 129201/A1:201409 (C93-129-201/A1) |
| 267 | AFNOR NF EN 1947-2014 | 2014-08-30 | French | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| 268 | AFNOR NF EN 129200-2014 | 2014-08-30 | French | Sectional specification : fixed inductors with ceramic or ferrite core wound with copper wire for RF circuits - Modified by NF EN 129200/A1:201409 (C93-129-200/A1) |
| 269 | AFNOR NF EN ISO 15883-1/A1-2014 | 2014-08-30 | French | Washer-disinfectors - Part 1 : general requirements, terms and definitions and tests |
| 270 | AFNOR NF EN 469-2014 | 2014-08-30 | French | Protective clothing for firefighters - Performance requirements for protective clothing for firefighting |
| 271 | AFNOR NF EN ISO 17078-1-2014 | 2014-08-30 | French | Petroleum and natural gas industries - Drilling and production equipment - Part 1 : side-pocket mandrels |
| 272 | AFNOR NF EN ISO 17405-2014 | 2014-08-30 | French | Non-destructive testing - Ultrasonic testing - Technique of testing claddings produced by welding, rolling and explosion |
| 273 | AFNOR NF EN 60358-3-2014 | 2014-08-30 | French | Coupling capacitors and capacitor dividers - Part 3 : AC or DC coupling capacitor for harmonic-filters applications |
| 274 | AFNOR NF ISO 10326-2-2014 | 2014-08-30 | French | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 2 : application to railway vehicles |
| 275 | AFNOR NF A50-800-3-2014 | 2014-08-30 | French | Hot-rolled weldable aluminium alloy sheets for armouring - Part 3 : characteristics of the ammunitions and maximum protection velocities |
| 276 | AFNOR NF EN ISO 9455-5-2014 | 2014-08-30 | French | Soft soldering fluxes - Test methods - Part 5 : copper mirror test |
| 277 | AFNOR NF EN 129000-2014 | 2014-08-30 | French | Generic specification : fixed RF wound inductors - Modified by NF EN 129000/A1:201409 (C93-129-000/A1) |
| 278 | AFNOR NF ISO 22559-1-2014 | 2014-08-30 | French | Safety requirements for lifts (elevators) - Part 1 : global essential safety requirements (GESRs) |
| 279 | AFNOR NF EN ISO 11357-4-2014 | 2014-08-30 | French | Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity |
| 280 | AFNOR NF A50-800-1-2014 | 2014-08-30 | French | Hot-rolled weldable aluminium alloy sheets for armouring - Part 1 : technical delivery conditions |
| 281 | AFNOR NF A50-800-2-2014 | 2014-08-30 | French | Hot-rolled weldable aluminium alloy sheets for armouring - Part 2 : ballistic testing method |
| 282 | AFNOR NF EN 61300-3-29-2014 | 2014-08-30 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29 : examinations and measurements - Spectral transfer characteristics of DWDM devices |
| 283 | AFNOR NF EN 62707-1-2014 | 2014-08-30 | French | LED-binning - Part 1 : general requirements and white colour grid |
| 284 | AFNOR NF EN 129100-2014 | 2014-08-30 | French | Sectional specification : wirewound surface mounting inductors - Modified by NF EN 129100/A1:201409 (C93-129-100/A1) |
| 285 | AFNOR NF EN 129102-2014 | 2014-08-30 | French | Blank detail specification : wirewound surface mounting inductors of assessed quality - Assessment level P - Modified by NF EN 129102/A1:201409 (C93-129-102/A1) |
| 286 | AFNOR NF EN 129101-2014 | 2014-08-30 | French | Blank detail specification : wirewound surface mounting inductors of assessed quality - Assessment level E - Modified by NF EN 129101/A1:201409 (C93-129-101/A1),NF EN 129101/A2:201409 (C93-129-101/A2) |
| 287 | AFNOR NF EN 13523-4-2014 | 2014-08-30 | French | Coil coated metals - Test methods - Part 4 : pencil hardness |
| 288 | AFNOR NF ISO 20752-2014 | 2014-08-30 | French | Cork stoppers - Determination of releasable 2, 4, 6-trichloroanisol (TCA) |
| 289 | AFNOR NF EN ISO 7010/A2-2014 | 2014-08-30 | French | Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 2 |
| 290 | AFNOR NF EN ISO 7010/A3-2014 | 2014-08-30 | French | Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 3 |
| 291 | AFNOR NF EN 301598-2014 | 2014-08-30 | French | White Space Devices (WSD) - Wireless access systems operating in the 470 MHz to 790 TV brodcast band - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (V1.1.1) |
| 292 | AFNOR NF EN ISO 22975-3-2014 | 2014-08-30 | French | Solar energy - Collectors components and materials - Part 3 : Absorber surface durability |
| 293 | AFNOR NF EN 16340-2014 | 2014-08-30 | French | Safety and control devices and appliances burning gaseous or liquid fuels - Combustion product sensing devices |
| 294 | AFNOR NF EN 61970-301-2014 | 2014-08-30 | French | Energy management system application program interface (EMS-API) - Part 301 : common information model (CIM) base |
| 295 | AFNOR NF EN 60927/A1-2014 | 2014-08-30 | French | Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements |
| 296 | AFNOR NF EN 50131-6/A1-2014 | 2014-08-30 | French | Alarm systems - Intrusion and hold-up systems - Part 6 : power supplies |
| 297 | AFNOR NF EN 16272-3-2-2014 | 2014-08-30 | French | Railway applications - Track - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-2 : normalized railway noise spectrum and single number ratings for direct f |
| 298 | AFNOR NF EN 16481-2014 | 2014-08-30 | French | Timber stairs - Structural design - Calculation method |
| 299 | AFNOR NF EN 16431-2014 | 2014-08-30 | French | Railway applications - Track - Hollow sleepers and bearers |
| 300 | AFNOR NF EN ISO 2588-2014 | 2014-08-30 | French | Leather - Sampling - Number of items for a gross sample |
| 301 | AFNOR NF EN ISO 7010/A1-2014 | 2014-08-30 | French | Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 1 |
| 302 | AFNOR NF X10-999-2014 | 2014-08-30 | French | Water wells and geothermal drilling - Construction, monitoring and dismantling of catchworks and wells to tap into underground water |
| 303 | AFNOR NF EN 60728-1-1-2014 | 2014-08-29 | French | Cable networks for television signals, sound signals and interactive services - Part 1-1 : RF cabling for two way home networks |
| 304 | AFNOR NF EN 60728-1-2014 | 2014-08-29 | French | Cable networks for television signals, sound signals and interactive services - Part 1 : system performance of forward paths (TA5) |
| 305 | AFNOR NF EN 60695-10-2-2014 | 2014-08-23 | French | Fire hazard testing - Part 10-2 : abnormal heat - Ball pressure test method |
| 306 | AFNOR NF P18-833-2014 | 2014-08-23 | French | Special products for hydraulic concrete constructions - Synthetic resin based wedging elements - Test for suitability of positioning |
| 307 | AFNOR NF ISO 29991-2014 | 2014-08-23 | French | Language learning services outside formal education - Requirements |
| 308 | AFNOR NF ISO 17411-2014 | 2014-08-23 | French | Optics and photonics - Optical materials and components - Test method for homogeneity of optical glasses by laser interferometry |
| 309 | AFNOR NF ISO 16525-9-2014 | 2014-08-23 | French | Adhesives - Test methods for isotropic electrically conductive adhesives - Part 9 : determination of high-speed signal-transmission characteristics |
| 310 | AFNOR NF EN ISO 11403-1-2014 | 2014-08-23 | French | Plastics - Acquisition and presentation of comparable multipoint data - Part 1 : mechanical properties |
| 311 | AFNOR NF EN ISO 10306-2014 | 2014-08-23 | French | Textiles - Cotton fibres - Evaluation of maturity by the air flow method |
| 312 | AFNOR NF EN ISO 10275-2014 | 2014-08-23 | French | Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent |
| 313 | AFNOR NF EN ISO 10113-2014 | 2014-08-23 | French | Metallic materials - Sheet and strip - Determination of plastic strain ratio |
| 314 | AFNOR NF EN ISO 8589/A1-2014 | 2014-08-23 | French | Sensory analysis - General guidance for the design of test rooms - Amendment 1 |
| 315 | AFNOR NF EN 123800-2014 | 2014-08-23 | French | Sectional specification : flexible multilayer printed boards with through connections |
| 316 | AFNOR NF EN 123500-2014 | 2014-08-23 | French | Sectional specification : flexible printed boards with through connections - Modified by NF EN 123500/A2:201409 (C93-123-500/A2) |
| 317 | AFNOR NF EN 123400-2014 | 2014-08-23 | French | Sectional specification : flexible printed boards without through connections - Modified by NF EN 123400/A2:201409 (C93-123-400/A2) |
| 318 | AFNOR NF EN 123300-2014 | 2014-08-23 | French | Sectional specification : multilayer printed boards - Modified by NF EN 123300/A1:201409 (C93-123-300/A1) |
| 319 | AFNOR NF EN 112000-2014 | 2014-08-23 | French | Generic specification : image converter and image intensifier tubes |
| 320 | AFNOR NF EN 62442-2-2014 | 2014-08-23 | French | Energy performance of lamp controlgear - Part 2 : controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear |
| 321 | AFNOR NF EN 61260-1-2014 | 2014-08-23 | French | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1 : specifications |
| 322 | AFNOR NF EN 13141-8-2014 | 2014-08-23 | French | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8 : performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation |
| 323 | AFNOR NF EN 300019-1-1-2014 | 2014-08-23 | French | Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-1 : classification of environmental conditions - Storage (V2.2.1) |
| 324 | AFNOR NF EN ISO 12228-1-2014 | 2014-08-23 | French | Determination of individual and total sterols contents - Gas chromatographic method - Part 1 : animal and vegetable fats and oils |
| 325 | AFNOR NF EN 140200-2014 | 2014-08-23 | French | Sectional specification : fixed power resistors - Modified by NF EN 140200/A1:201409 (C83-210/A1) |
| 326 | AFNOR NF EN 300019-1-2-2014 | 2014-08-23 | French | Envinmental Engineering (EE) - Environmental conditions and environmental test for telecommunications equipment - Part 1-2 : classification of environmental conditions - Transportation (V2.2.1) |
| 327 | AFNOR NF EN ISO 18104-2014 | 2014-08-23 | French | Health Informatics - Categorial structures for representation of nursing diagnoses and nursing actions in terminological systems |
| 328 | AFNOR NF EN 60317-52-2014 | 2014-08-23 | French | Specifications for particular types of winding wires - Part 52 : aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 |
| 329 | AFNOR NF EN 140201-2014 | 2014-08-23 | French | Blank detail specification : fixed power resistors (Assessment level S) |
| 330 | AFNOR NF EN 134102-2014 | 2014-08-23 | French | Blank detail specification : multi turn concentric capacitors (Qualification approval) |
| 331 | AFNOR NF EN 134101-2014 | 2014-08-23 | French | Blank detail specification : single turn disc trimmer capacitors (Qualification approval) |
| 332 | AFNOR NF ISO 10055-2014 | 2014-08-23 | French | Mechanical vibration - Vibration testing requirements for shi^pboard equipment and machinery components |
| 333 | AFNOR NF EN 60191-4-2014 | 2014-08-23 | French | Mechanical standardization of semiconductor devices - Part 4 : coding system and classification into forms of package outlines for semiconductor device packages |
| 334 | AFNOR NF EN 60079-29-3-2014 | 2014-08-23 | French | Explosive atmospheres - Part 29-3 : gas detectors - Guidance on functional safety of fixed gas detection systems |
| 335 | AFNOR NF EN ISO 14389-2014 | 2014-08-23 | French | Textiles - Determination of the phthalates content - Tetrahydrofuran method |
| 336 | AFNOR NF EN 134103-2014 | 2014-08-23 | French | Blank detail specification : vane type air dielectric capacitor (Qualification approval) |
| 337 | AFNOR NF EN 134104-2014 | 2014-08-23 | French | Blank detail specification : compression type trimmer capacitors (Qualification approval) |
| 338 | AFNOR NF EN ISO 16559-2014 | 2014-08-23 | French | Solid biofuels - Terminology, definitions and descriptions |
| 339 | AFNOR NF EN 61754-30-2014 | 2014-08-23 | French | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 30 : type CLIK connector series |
| 340 | AFNOR NF EN 61675-1-2014 | 2014-08-23 | French | Radionuclide imaging devices - Characteristics and test conditions - Part 1 : positron emission tomographs |
| 341 | AFNOR NF EN 302307-2014 | 2014-08-23 | French | Digital video broadcasting (DVB) - Second generation framing structure, channel coding and modulation systems for broadcasting, interactive services, news gathering and other broadband satellite applications (DVB-S2) (V1.3.1) |
| 342 | AFNOR NF E25-030-1-2014 | 2014-08-23 | French | Fasteners - Threaded connections with ISO metric thread - Part 1 : design rules for tensile loaded bolted joints - Simplified procedure |
| 343 | AFNOR NF EN 301545-2-2014 | 2014-08-23 | French | Digital video broadcasting (DVB) - Second Generation DVB interactive satellite system (DVB-RCS2) - Part 2 : lower Layers for satellite standard (V1.2.1) |
| 344 | AFNOR NF EN 60754-2-2014 | 2014-08-23 | French | Test on gases evolved during combustion of materials from cables - Part 2 : determination of acidity (by pH measurement) and conductivity |
| 345 | AFNOR NF EN 61970-453-2014 | 2014-08-23 | French | Energy management system application program interface (EMS-API) - Part 453 : diagram layout profile |
| 346 | AFNOR NF EN 60754-1-2014 | 2014-08-23 | French | Test on gases evolved during combustion of materials from cables - Part 1 : determination of the halogen acid gas content |
| 347 | AFNOR NF S61-547-2014 | 2014-08-23 | French | Firefighting and rescue equipment - Special complementary provisions for turntable ladders |
| 348 | AFNOR NF EN 50123-4/A1-2014 | 2014-08-23 | French | Railway applications - Fixed installations - D.C. switchgear - Part 4 : outdoor d.c. disconnectors, switch-disconnectors and earthing switches |
| 349 | AFNOR NF E25-030-2-2014 | 2014-08-23 | French | Fasteners - Threaded connections with ISO metric thread - Part 2 : design rules for tensile loaded bolted joints - Complete procedure |
| 350 | AFNOR NF EN 62271-202-2014 | 2014-08-23 | French | High-voltage switchgear and controlgear - Part 202 : high-voltage/low-voltage prefabricated substation |
| 351 | AFNOR NF D36-133-2014 | 2014-08-16 | French | End fittings with seal gasket for corrupted metallic flexible piping for the external connection of domestic appliances using gazeous fuels distributed by network |
| 352 | AFNOR NF EN 61158-3-14-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 3-14 : data-link layer service definition - Type 14 : elements |
| 353 | AFNOR NF EN 61158-3-12-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 3-12 : data-link layer service definition - Type 12 elements |
| 354 | AFNOR NF U42-107-2014 | 2014-08-16 | French | Fertilizers - Determination of water-insoluble matter |
| 355 | AFNOR NF EN 16570-2014 | 2014-08-16 | French | Information technology - Notification of RFID - The information sign and additional information to be provided by operators of RFID application systems |
| 356 | AFNOR NF ISO 1986-1-2014 | 2014-08-16 | French | Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1 : machines with a table length of up to 1 600 mm |
| 357 | AFNOR NF EN ISO 6427-2014 | 2014-08-16 | French | Plastics - Determination of matter extractable by organic solvents (conventional methods) |
| 358 | AFNOR NF EN ISO 10343-2014 | 2014-08-16 | French | Ophthalmic instruments - Ophthalmometers |
| 359 | AFNOR NF EN 14893-2014 | 2014-08-16 | French | LPG equipment and accessories - Transportable Liquefied petroleum gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres |
| 360 | AFNOR NF ISO 17299-1-2014 | 2014-08-16 | French | Textiles - Determination of deodorant property - Part 1 : general principle |
| 361 | AFNOR NF EN 14683-2014 | 2014-08-16 | French | Medical face masks - Requirements and test methods |
| 362 | AFNOR NF P16-442-2014 | 2014-08-16 | French | Installation and maintenance of light liquids separators and sludge traps |
| 363 | AFNOR NF EN 60695-2-13/A1-2014 | 2014-08-16 | French | Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials |
| 364 | AFNOR NF ISO 17299-3-2014 | 2014-08-16 | French | Textiles - Determination of deodrant property - Part 3 : gas chromatography method |
| 365 | AFNOR NF S52-002-2014 | 2014-08-16 | French | Light motorized vehicles - Electric hire karts - Safety requirements |
| 366 | AFNOR NF EN 14190-2014 | 2014-08-16 | French | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| 367 | AFNOR NF ISO 17299-2-2014 | 2014-08-16 | French | Textiles - Determination of deodorant property - Part 2 : detector tube method |
| 368 | AFNOR NF EN 14540-2014 | 2014-08-16 | French | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| 369 | AFNOR NF ISO 16462-2014 | 2014-08-16 | French | Cubic boron nitride inserts, tipped or solid - Dimensions, types |
| 370 | AFNOR NF EN 140401-802/A2-2014 | 2014-08-16 | French | Detail specification : fixed low power film SMD resistors - Rectangular - Stability classes 1;2 |
| 371 | AFNOR NF EN 140401-804/A1-2014 | 2014-08-16 | French | Detail Specification : fixed low power film high stability SMD resistors - Rectangular - Stability classes 0,1;0,25 |
| 372 | AFNOR NF EN 140101-806/A1-2014 | 2014-08-16 | French | Detail Specification : fixed low power film resistors - Metal film resistors on high grade ceramic, conformal coated or molded, axial or preformed leads |
| 373 | AFNOR NF EN 300392-12-8-2014 | 2014-08-16 | French | Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12 : supplementary services stage 3 - Sub-part 8 : area Selection (AS) (V1.2.1) |
| 374 | AFNOR NF EN 61158-5-20-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 5-20 : application layer service definition - Type 20 elements |
| 375 | AFNOR NF EN 61158-5-19-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 5-19 : application layer service definition - Type 19 elements |
| 376 | AFNOR NF EN 61158-5-14-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 5-14 : application layer service definition - Type 14 elements |
| 377 | AFNOR NF EN 61158-4-14-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 4-14 : data-link layer protocol specification - Type 14 elements |
| 378 | AFNOR NF EN 61158-4-12-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 4-12 : data-link layer protocol specification - Type 12 elements |
| 379 | AFNOR NF EN 61158-3-19-2014 | 2014-08-16 | French | Industrial communication networks - Fieldbus specifications - Part 3-19 : data-link layer service definition - Type 19 elements |
| 380 | AFNOR NF EN 140401-801/A1-2014 | 2014-08-16 | French | Detail specification : fixed low power film SMD resistors - Rectangular - Stability classes 0,1;0,25;0,5;1 |
| 381 | AFNOR NF EN 3983-2014 | 2014-08-16 | French | Aerospace series - Aluminium alloy AL-P7050 -T7651 - Plate - 6 mm < a < or = 160 mm |
| 382 | AFNOR NF EN 1991-1-7/A1-2014 | 2014-08-16 | French | Eurocode 1 - Actions on structures - Part 1-7 : general actions - Accidental actions |
| 383 | AFNOR FD E29-761-2014 | 2014-08-13 | French | Gas cylinders - Hydraulic bursting test |
| 384 | AFNOR FD E29-760-2014 | 2014-08-13 | French | Gaz cylinders - Fatigue srength testing under repeated pressurizing for liquefied or dissolved compressed gases |
| 385 | AFNOR FD ISO/TR 13570-2-2014 | 2014-08-13 | French | Wheelchairs - Part 2 : typical values and recommended limits of dimensions, mass and manoeuvring space as determined in ISO 7176-5 |
| 386 | AFNOR FD ISO/TR 16098-2014 | 2014-08-13 | French | Reclaimed rubbers and reclaimed crumb rubbers - Evaluation of dispersion in rubber mixes |
| 387 | AFNOR FD ISO 10002-2014 | 2014-08-13 | French | Quality management - Customer satisfaction - Guidelines for complaints handling in organizations |
| 388 | AFNOR NF EN 62670-1-2014 | 2014-08-09 | French | Photovoltaic concentrators (CPV) - Performance testing - Part 1 : standard Conditions |
| 389 | AFNOR NF EN ISO 9902-1/A2-2014 | 2014-08-09 | French | Textile machinery - Noise test code - Part 1 : common requirements - Amendment 2 |
| 390 | AFNOR NF EN ISO 9902-2/A2-2014 | 2014-08-09 | French | Textile machinery - Noise test code - Part 2 : spinning preparatory and spinning machinery - Amendement 2 |
| 391 | AFNOR NF EN ISO 9902-3/A2-2014 | 2014-08-09 | French | Textile machinery - Noise test code - Part 3 : Nonwoven machinery - Amendment 2 |
| 392 | AFNOR NF EN ISO 9902-4/A2-2014 | 2014-08-09 | French | Textile machinery - Noise test code - Part 4 : yarn processing, cordage and rope manufacturing machinery - Amendment 2 |
| 393 | AFNOR NF EN ISO 9902-5/A2-2014 | 2014-08-09 | French | Textile machinery - Noise test code - Part 5 : weaving and knitting preparatory machinery - Amendment 2 |
| 394 | AFNOR NF EN ISO 9902-6/A2-2014 | 2014-08-09 | French | Textile machinery - Noise test code - Part 6 : fabric manufacturing machinery - Amendment 2 |
| 395 | AFNOR NF EN ISO 9902-7/A2-2014 | 2014-08-09 | French | Textile machinery - Noise test code - Part 7 : dyeing and finishing machinery - Amendment 2 |
| 396 | AFNOR NF EN ISO 10140-5/A1-2014 | 2014-08-09 | French | Acoustics - Laboratory measurement of sound insulation of building elements - Part 5 : requirements for test facilities and equipment - Amendment 1 : rainfall sound |
| 397 | AFNOR NF EN 13205-1-2014 | 2014-08-09 | French | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1 : general requirements |
| 398 | AFNOR NF EN ISO 10683-2014 | 2014-08-09 | French | Fasteners - Non-electrolytically applied zinc flake coatings |
| 399 | AFNOR NF ISO 17289-2014 | 2014-08-09 | French | Water quality - Determination of dissolved oxygen - Optical sensor method |
| 400 | AFNOR NF EN 12873-1-2014 | 2014-08-09 | French | Influence of materials on water intended for human consumption - Influence due to migration - Part 1 : test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials |
| 401 | AFNOR NF EN 16191-2014 | 2014-08-09 | French | Tunnelling machinery - Safety requirements |
| 402 | AFNOR NF EN 15080-12-2014 | 2014-08-09 | French | Extended application of results from fire resistance tests - Part 12 : loadbearing masonry walls |
| 403 | AFNOR NF EN 13480-8 V2/A1-2014 | 2014-08-09 | French | Metallic industrial piping - Part 8 : additionnal requirements for aluminium and aluminium alloys piping |
| 404 | AFNOR NF EN 13205-2-2014 | 2014-08-09 | French | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2 : laboratory performance test based on determination of sampling efficiency |
| 405 | AFNOR NF EN 13205-4-2014 | 2014-08-09 | French | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations |
| 406 | AFNOR NF P98-128-2014 | 2014-08-09 | French | Road foundations and roadbeds - Road roller-compacted concretes and high performances aggregates treated with hydraulic binders - Definition, composition and classification |
| 407 | AFNOR NF EN 13205-5-2014 | 2014-08-09 | French | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5 : aerosol sampler performance test and sampler comparison carried out at workplaces |
| 408 | AFNOR NF EN 13205-6-2014 | 2014-08-09 | French | Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6 : transport and handling tests |
| 409 | AFNOR NF EN 62382-2014 | 2014-08-09 | French | Control systems in the process industry - Electrical and instrumentation loop check |
| 410 | AFNOR NF EN 123100-2014 | 2014-08-09 | French | Sectional Specifications : single and double-sided printed boards with plain holes - Modified by NF EN 123100/A1:201409 (C93-123-100/A1) |
| 411 | AFNOR NF EN 14427-2014 | 2014-08-09 | French | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| 412 | AFNOR NF EN 13963-2014 | 2014-08-09 | French | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| 413 | AFNOR NF EN 13950-2014 | 2014-08-09 | French | Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| 414 | AFNOR NF DTU 34.1 P2-2014 | 2014-08-09 | French | Building works - Installation of industrial, commercial and garage doors and gates - Part 2 : contract bill of special administrative model clauses |
| 415 | AFNOR NF S86-305-2014 | 2014-08-09 | French | Horology - Radioluminescent time measuring instruments |
| 416 | AFNOR NF ISO 2476-2014 | 2014-08-09 | French | Butadiene rubber (BR) - Solution-polymerized types - Evaluation procedures |
| 417 | AFNOR NF ISO 2393-2014 | 2014-08-09 | French | Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures |
| 418 | AFNOR NF EN ISO 21670-2014 | 2014-08-09 | French | Fasteners - Hexagon weld nuts with flange |
| 419 | AFNOR NF EN ISO 6808-2014 | 2014-08-09 | French | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification |
| 420 | AFNOR NF EN ISO 4126-6-2014 | 2014-08-09 | French | Safety devices for protection against excessive pressure - Part 6 : application, selection and installation of bursting disc safety devices |
| 421 | AFNOR NF EN ISO 3233-2-2014 | 2014-08-09 | French | Paints and varnishes - Determination of the percentage volume of non-volatile matter Part 2 : method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of the dry-film density on coated test pa |
| 422 | AFNOR NF EN 302636-2-2014 | 2014-08-09 | French | Intelligent transport systems (ITS) - Vehicular communications - GeoNetworking - Part 2 : scenarios (V1.2.1) |
| 423 | AFNOR NF EN 61968-9-2014 | 2014-08-09 | French | Application integration at electric utilities - System interfaces for distribution management - Part 9 : interface for meter reading and control |
| 424 | AFNOR NF EN 60831-2-2014 | 2014-08-09 | French | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 2 : ageing test, self-healing test and destruction test |
| 425 | AFNOR NF EN 60831-1-2014 | 2014-08-09 | French | Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1 : general - Performance, testing and rating - Safety requirements - Guide for installation and operation |
| 426 | AFNOR NF EN 60721-2-9-2014 | 2014-08-09 | French | Classification of environmental conditions - Part 2-9 : environmental conditions appearing in nature - Measured shock and vibration data - Storage, Transportation and in-use |
| 427 | AFNOR NF EN 16447-2014 | 2014-08-09 | French | Explosion isolation flap valves |
| 428 | AFNOR NF EN 16425-2014 | 2014-08-09 | French | Simple Publishing Interface |
| 429 | AFNOR NF DTU 34.1 P1-2-2014 | 2014-08-09 | French | Building works - Installation of industrial, commercial and garage doors and gates - Part 1-2 : general criteria for choice of materials |
| 430 | AFNOR NF DTU 34.1 P1-1-2014 | 2014-08-09 | French | Building works - Installation of industrial, commercial and garage doors and gates - Part 1-1 : Contract bill of technical model clauses |
| 431 | AFNOR NF DTU 34.1-2014 | 2014-08-09 | French | Building works - Installation of industrial, commercial and garage doors and gates - Part 1-1 : Contract bill of technical model clauses - Part 1-2 : general criteria for choice of materials - Part 2 : contract bill of special administrative m |
| 432 | AFNOR NF EN 60061-3/A48-2014 | 2014-08-09 | French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges |
| 433 | AFNOR NF EN ISO 16297-2014 | 2014-08-09 | French | Milk - Bacterial count - Protocol for the evaluation of alternative methods |
| 434 | AFNOR NF EN 61936-1/A1-2014 | 2014-08-09 | French | Power installations exceeding 1 kV a.c. - Part 1 : common rules |
| 435 | AFNOR NF EN 61837-2/A1-2014 | 2014-08-09 | French | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2 : ceramic enclosures |
| 436 | AFNOR NF EN 61788-5-2014 | 2014-08-09 | French | Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires |
| 437 | AFNOR NF EN 61558-2-10-2014 | 2014-08-09 | French | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10 : particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 0 |
| 438 | AFNOR NF EN 60061-2/A47-2014 | 2014-08-09 | French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : lampholders |
| 439 | AFNOR NF EN 60034-30-1-2014 | 2014-08-09 | French | Rotating electrical machines - Part 30-1 : efficiency classes of operated AC motors (IE-code) |
| 440 | AFNOR NF EN 12697-43-2014 | 2014-08-09 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 43 : resistance to fuel |
| 441 | AFNOR NF EN 1643-2014 | 2014-08-09 | French | Safety and control devices for gas burners and burning appliances - Valve proving systems for automatic shut-off valves |
| 442 | AFNOR NF EN 900-2014 | 2014-08-09 | French | Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite |
| 443 | AFNOR NF EN 508-1-2014 | 2014-08-09 | French | Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1 : Steel |
| 444 | AFNOR XP ISO/CEI TS 17027-2014 | 2014-08-06 | French | Conformity assessment - Vocabulary related to competence of persons used for certification of persons |
| 445 | AFNOR FD E39-007-2014 | 2014-08-06 | French | District heating - Counting of heat and frigorific energy - Guidelines for selecting, installation and operation |
| 446 | AFNOR XP CEN/TS 16555-1-2014 | 2014-08-06 | French | Innovation management - Part 1 : innovation management system |
| 447 | AFNOR NF C14-100/A2-2014 | 2014-08-02 | French | Low-voltage mains installations |
| 448 | AFNOR NF EN 60947-4-3-2014 | 2014-08-02 | French | Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| 449 | AFNOR NF EN 16479-2014 | 2014-08-02 | French | Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Automated sampling devices (samplers) for water and waste water |
| 450 | AFNOR NF EN 16482-2014 | 2014-08-02 | French | Founding - Continuous cast iron bars |
| 451 | AFNOR NF EN 303039-2014 | 2014-08-02 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land Mobile Service - Multichannel transmitter specification for the PMR Service - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (V1 |
| 452 | AFNOR NF EN ISO 23553-1-2014 | 2014-08-02 | French | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1 : automatic and semi-automatic valves |
| 453 | AFNOR NF ISO 1535-2014 | 2014-08-02 | French | Continuous mechanical handling equipment for loose bilk materials - Troughedbelt conveyors (other than portable conveyors) - Belts |
| 454 | AFNOR NF EN 16590-3-2014 | 2014-08-02 | French | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3 : series development, hardware and software |
| 455 | AFNOR NF EN 16590-2-2014 | 2014-08-02 | French | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2 : concept phase |
| 456 | AFNOR NF EN 16590-1-2014 | 2014-08-02 | French | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1 : general principles for design and development |
| 457 | AFNOR NF EN 16656-2014 | 2014-08-02 | French | Information technology - Radio frequency identification for item management - RFID Emblem |
| 458 | AFNOR NF ISO 1536-2014 | 2014-08-02 | French | Continuous mechanical handing equipment for loose bulk materials - Troughed belt conveyor (other than portable conveyors) - Belt pulleys |
| 459 | AFNOR NF ISO 1816-2014 | 2014-08-02 | French | Continuous mechanical handling equipment for loose bulk materials and unit loads - Belt conveyors - Basic characteristics of motorized driving pulleys |
| 460 | AFNOR NF ISO 2109-2014 | 2014-08-02 | French | Continuous mechanical handling equipment - Light duty belt conveyors for loose bulk materials |
| 461 | AFNOR NF ISO 2322-2014 | 2014-08-02 | French | Styrene-butadiene rubber (SBR) - Emulsion- and solution-polymerized types - Evaluation procedures |
| 462 | AFNOR NF X50-056-2014 | 2014-08-02 | French | Services for resident persons |
| 463 | AFNOR NF EN 16590-4-2014 | 2014-08-02 | French | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4 : production, operation, modification and supporting processes |
| 464 | AFNOR NF EN ISO 16373-3-2014 | 2014-08-02 | French | Textiles - Dyestuffs - Part 3 : method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol) |
| 465 | AFNOR NF EN 60068-1-2014 | 2014-08-02 | French | Environmental testing - Part 1 : general and guidance |
| 466 | AFNOR NF EN ISO 19115-1-2014 | 2014-08-02 | French | Geographic information - Metadata - Part 1 : fundamentals |
| 467 | AFNOR NF EN ISO 19119-2014 | 2014-08-02 | French | Geographic information - Services |
| 468 | AFNOR NF EN ISO 16373-2-2014 | 2014-08-02 | French | Textiles - Dyestuffs - Part 2 : general method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water) |
| 469 | AFNOR NF EN 1124-2-2014 | 2014-08-02 | French | Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2 : system S, forms and dimensions |
| 470 | AFNOR NF EN 2245-2014 | 2014-08-02 | French | Aerospace series - Pipelines for liquids and gases - Definitions |
| 471 | AFNOR NF EN 60034-18-41-2014 | 2014-08-02 | French | Rotating electrical machines - Part 18-41 : partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and quality control tests |
| 472 | AFNOR NF EN 60317-36-2014 | 2014-08-02 | French | Specifications for particular types of winding wires - Part 36 : solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer |
| 473 | AFNOR NF ISO 13165-2-2014 | 2014-08-02 | French | Water quality - Radium 226 - Part 2 : test method using emanometry |
| 474 | AFNOR NF EN 289-2014 | 2014-08-02 | French | Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements |
| 475 | AFNOR NF ISO 10844-2014 | 2014-08-02 | French | Acoustics - Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| 476 | AFNOR NF EN ISO 10140-1/A2-2014 | 2014-08-02 | French | Acoustics - Laboratory measurement of sound insulation of building elements - Part 1 : application rules for specific products Amendment 2 : rainfall sound |
| 477 | AFNOR NF ISO 16463-2014 | 2014-08-02 | French | Polycristalline diamond inserts, tipped - Dimensions, types |
| 478 | AFNOR NF EN ISO 10545-8-2014 | 2014-08-02 | French | Ceramic tiles - Part 8 : determination of linear thermal expansion |
| 479 | AFNOR NF EN ISO 10350-1/A1-2014 | 2014-08-02 | French | Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials - Amendment 1 |
| 480 | AFNOR NF EN 14122-2014 | 2014-08-02 | French | Foodstuffs - Determination of vitamin B1 by high performance liquid chromatography |
| 481 | AFNOR NF EN 14570-2014 | 2014-08-02 | French | LPG equipment and accessories - Equipping of overground and underground LPG vessels |
| 482 | AFNOR NF S52-010-2014 | 2014-08-02 | French | Public swimming pool - Computer vision systems for the detection of drowning accidents in swimming pools - Safety requirements and test methods |
| 483 | AFNOR AFNOR C17-205-2014 | 2014-08-01 | French | Outdoor lighting installation - Determination of cross sectional Area of conductors and selection of protective devices |
| 484 | AFNOR NF EN 1097-10-2014 | 2014-07-25 | French | Tests for mechanical and physical properties of aggregates - Part 10 : determination of water suction height |
| 485 | AFNOR NF EN 4443-2014 | 2014-07-25 | French | Aerospace series - Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated - Classification : 900 MPa (at ambient temperature)/425 °C |
| 486 | AFNOR NF ISO 14104-2014 | 2014-07-25 | French | Gears - Surface temper etch inspection after grinding, chemical method |
| 487 | AFNOR NF EN ISO 11073-10102-2014 | 2014-07-25 | French | Health informatics - Point-of-care medical device communication - Part :10102 : nomenclature - Annotated ECG |
| 488 | AFNOR NF EN ISO 6509-1-2014 | 2014-07-25 | French | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1 : test method |
| 489 | AFNOR NF EN 13451-3/IN2-2014 | 2014-07-25 | French | Swimming pool equipment - Part 3 : additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
| 490 | AFNOR NF EN 13451-3+A2-2014 | 2014-07-25 | French | Swimming pool equipment - Part 3 : additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
| 491 | AFNOR NF EN ISO 8871-2/A1-2014 | 2014-07-25 | French | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2 : identification and characterization - Amendment 1 |
| 492 | AFNOR NF EN 12420-2014 | 2014-07-25 | French | Copper and copper alloys - Forgings |
| 493 | AFNOR NF ISO 13179-1-2014 | 2014-07-25 | French | Implants for surgery - Plasma-sprayed unalloyed titanium coatings on metallic surgical implants - Part 1 : general requirements |
| 494 | AFNOR NF X50-553-2014 | 2014-07-25 | French | Management of research activities |
| 495 | AFNOR NF ISO 16000-29-2014 | 2014-07-25 | French | Indoor air - Part 29 : test methods for VOC detectors |
| 496 | AFNOR NF ISO 16000-31-2014 | 2014-07-25 | French | Indoor air - Part 31 : measurement of flame retardants and plasticizers based on organophosphorus compounds - Phosphoric acid ester |
| 497 | AFNOR NF EN 16571-2014 | 2014-07-25 | French | Information technology - RFID privacy impact assessment process |
| 498 | AFNOR NF EN 1995-1-1/A2-2014 | 2014-07-25 | French | Eurocode 5 : design of timber structures - Part 1-1 : general - Common rules and rules for buildings |
| 499 | AFNOR NF EN ISO 19900-2014 | 2014-07-25 | French | Petroleum and natural gas industries - General requirements for offshore structures |
| 500 | AFNOR NF ISO 4123-2014 | 2014-07-25 | French | Belt conveyors - Impact rings for carrying idlers and discs for return idlers- Main dimensions |
|