Pos | standard Number | publication date | Language | Description |
1 | AFNOR NF ISO 19932-2-2006 | 2006-06-01 | French | Equipment for crop protection - Knapsack sprayers - Part 2 : performance limits |
2 | AFNOR NF EN 12435-2006 | 2006-06-01 | French | Health informatics - Expression of results of measurements in health sciences |
3 | AFNOR NF EN 61076-2-101/A1-2006 | 2006-06-01 | French | Connectors for electronic equipment - Part 2-101 : circular connectors - Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications |
4 | AFNOR CWA 15556-2-2006 | 2006-06-01 | French | Product Description and Classification - Part 2 : Product Classes with sets of properties |
5 | AFNOR CWA 15556-1-2006 | 2006-06-01 | French | Product Description and Classification - Part 2 : New Property Library |
6 | AFNOR NF L06-831-2006 | 2006-06-01 | French | Aerospace series - Metallic parts - Inducement compressive surface stresses - Steel shot, glass beads and ceramic beads |
7 | AFNOR NF ISO 10247/A1-2006 | 2006-06-01 | French | Conveyor belts - Characteristics of covers - Classification |
8 | AFNOR NF ISO 23611-1-2006 | 2006-06-01 | French | Soil quality - Sampling of soil invertebrates - Part 1 : hand-sorting and formalin extraction of earthworms |
9 | AFNOR NF ISO 23611-2-2006 | 2006-06-01 | French | Soil quality - Sampling of soil invertebrates - Part 2 : sampling and extraction of microarthropods (Collembola and Acarina) |
10 | AFNOR NF E39-002-2006 | 2006-06-01 | French | District heating - Hot or cold water transport and distribution networks - Particularities of design |
11 | AFNOR NF ISO 23671-2006 | 2006-06-01 | French | Passenger car tyres - Method for measuring relative wet grip performance - Loaded new tyres |
12 | AFNOR NF EN 12101-1/A1-2006 | 2006-06-01 | French | Smoke and heat control systems - Part 1 : specification for smoke barriers |
13 | AFNOR NF ISO 2176-2006 | 2006-06-01 | French | Petroleum products - Lubricating grease - Determination of dropping point |
14 | AFNOR NF EN 12094-8-2006 | 2006-06-01 | French | Fixed firefighting system - Components for gas extinguishing systems - Part 8 : requirements and test methods for connectors |
15 | AFNOR NF EN 301040-2006 | 2006-06-01 | French | Terrestrial Trunked Radio (TETRA) - Security - Lawful Interception (LI) interface (V2.1.1) |
16 | AFNOR NF EN 61315-2006 | 2006-06-01 | French | Calibration of fibre-optic power meters |
17 | AFNOR NF EN ISO 16135-2006 | 2006-06-01 | French | Industrial valves - Ball valves of thermoplastic materials |
18 | AFNOR NF EN 300812-3-2006 | 2006-06-01 | French | Terrestrial Trunked Radio (TETRA) - Subscriber Identy Module to Mobile Equipment (SIM-ME) interface - Part 3 : integrated Circuit (IC) - Physical, logical and TSIM application characteristics (V2.3.1) |
19 | AFNOR NF EN 14810-2006 | 2006-06-01 | French | Surfaces for sports areas - Determination of spike resistance |
20 | AFNOR NF EN 14781-2006 | 2006-06-01 | French | Racing bicycles - Safety requirements and test methods |
21 | AFNOR NF EN 2713-007-2006 | 2006-06-01 | French | Aerospaces series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55掳C and 200掳C - Part 007 : screened (spiral) and jacketed, UV laser printable - Product standard |
22 | AFNOR NF EN 2713-003-2006 | 2006-06-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55掳C and 200掳C - Part 003 : screened (spiral) and jacketed, ink jet printable - Product standard |
23 | AFNOR NF EN 14766-2006 | 2006-06-01 | French | Mountain bicycles - Safety requirements and test methods |
24 | AFNOR XP T90-412-2006 | 2006-06-01 | French | Water quality - Detection and enumeration of pathogenic staphylococci - Method by membrane filtration |
25 | AFNOR NF EN ISO 16136-2006 | 2006-06-01 | French | Industrial valves - Butterfly valves of thermoplastic materials |
26 | AFNOR NF EN 3745-306-2006 | 2006-06-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306 : variation of attenuation during temperature cycling |
27 | AFNOR NF EN ISO 16137-2006 | 2006-06-01 | French | Industrial valves - Check valves of thermoplastic materials |
28 | AFNOR NF EN ISO 7391-1-2006 | 2006-06-01 | French | Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1 : designation system and basis for specifications |
29 | AFNOR NF EN ISO 7391-2-2006 | 2006-06-01 | French | Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties |
30 | AFNOR NF EN ISO 16139-2006 | 2006-06-01 | French | Industrial valves - Gate valves of thermoplastic materials |
31 | AFNOR CWA 15554-2006 | 2006-06-01 | French | Specifications for a Web accessibility Conformity Assessment Scheme and a Web Accessibilty Quality Mark |
32 | AFNOR NF EN 300394-1-2006 | 2006-06-01 | French | Terrsetrial trunked radio (TETRA) - Conformance testing specification - Part 1 : radio (V2.4.1) |
33 | AFNOR NF EN 3745-501-2006 | 2006-06-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501 : optical fibre proof test |
34 | AFNOR NF EN 3745-502-2006 | 2006-06-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 502 : tensile strength for short length of optical fibres |
35 | AFNOR NF EN 13108-20-2006 | 2006-06-01 | French | Bituminous mixtures - Materials specifications - Part 20 : type testing |
36 | AFNOR NF EN 13108-21-2006 | 2006-06-01 | French | Bituminous mixtures - Material sp茅cifications - Part 21 : factory production control |
37 | AFNOR NF EN 4057-301-2006 | 2006-06-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 301 : salt mist test |
38 | AFNOR NF ISO 15952-2006 | 2006-06-01 | French | Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination |
39 | AFNOR NF EN 50436-1-2006 | 2006-06-01 | French | Alcohol interlocks - Test methods and performance requirements - Part 1 : instruments for drink-driving-offender programs |
40 | AFNOR NF E63-060-2006 | 2006-06-01 | French | Tools for pressing - Wear plates - General specifications |
41 | AFNOR NF EN 15042-2-2006 | 2006-06-01 | French | Thickness measurement of coatings and characterization of surfaces with surface waves - Part 2 : guide to the thickness measurement of coatings by photothermic method |
42 | AFNOR NF EN 13126-1-2006 | 2006-06-01 | French | Building hardware - Requirement and test methods for windows and doors heigt windows - Part 1 : requirements common to all types of hardware |
43 | AFNOR CWA 15555-2006 | 2006-06-01 | French | Guidelines and support for building - Application profiles in e-learning |
44 | AFNOR NF EN 15042-1-2006 | 2006-06-01 | French | Thickness measurement of coatings and characterization of surfaces with surface waves - Part 1 : guide to determination of elastic constants, density and thickness of films by laser induced surface acoustic waves |
45 | AFNOR NF EN 50419-2006 | 2006-06-01 | French | Marking of electrical and electronic equipment in accordance with Article 11(2) of Directive 2002/96/EC (WEEE) |
46 | AFNOR NF ISO 1711-2-2006 | 2006-06-01 | French | Assembly tools for screws and nuts - Technical specifications - Part 2 : machine-operated sockets ("impact") |
47 | AFNOR NF EN ISO 10042-2006 | 2006-06-01 | French | Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections |
48 | AFNOR NF EN 1333-2006 | 2006-06-01 | French | Flanges and their joints - Pipework components - Definition and selection of PN |
49 | AFNOR NF EN ISO 23631-2006 | 2006-06-01 | French | Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GCD-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization |
50 | AFNOR NF EN 1332-5-2006 | 2006-05-01 | French | Identification card systems - Man-machine interface - Part 5 : raised tactile symbols for differenciation of application on ID-1 cards |
51 | AFNOR NF X41-580-9-2006 | 2006-05-01 | French | Wood preservatives - physicochemical testing - Part 9 : dispersion suitability |
52 | AFNOR NF X41-580-10-2006 | 2006-05-01 | French | Wood preservatives - physicochemical testing - Part 10 : storage stability testing |
53 | AFNOR NF EN ISO 3785-2006 | 2006-05-01 | French | Metallic materials - Designation of test specimen axes in relation to product texture |
54 | AFNOR NF E63-113-2006 | 2006-05-01 | French | Tools for pressing - Rectangular retainers and backing plates for flanged punches - Top fixing |
55 | AFNOR NF EN ISO 20126-2006 | 2006-05-01 | French | Dentistry - Manual toothbrushes - General requirements and test methods |
56 | AFNOR NF ISO 1496-3/A1-2006 | 2006-05-01 | French | Series 1 freight containers - Specification and testing - Part 3 : tank containers for liquids, gases and pressurized dry bulk - Amendment 1 : testing of the external restraint (longitudinal) dynamic |
57 | AFNOR NF EN ISO 16138-2006 | 2006-05-01 | French | Industrial valves - Diaphragm valves of thermoplastic materials |
58 | AFNOR CWA 15541-2006 | 2006-05-01 | French | Coding for railway business locations |
59 | AFNOR CWA 15540-2006 | 2006-05-01 | French | Coding for railway undertakings, infrastructure managers and other companies, involved in the rail transport chain |
60 | AFNOR CWA 15539-2006 | 2006-05-01 | French | Numbering of and coding system for trains |
61 | AFNOR NF EN ISO 11442-2006 | 2006-05-01 | French | Technical product documentation - Document management |
62 | AFNOR NF ISO 15242-3-2006 | 2006-05-01 | French | Rolling bearings - Measuring methods for vibration - Part 3 : radial spherical and tapered roller bearings with cylindrical bore and outside surface |
63 | AFNOR NF EN 301033-2006 | 2006-05-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands (V1.2.1) |
64 | AFNOR CWA 15538-2006 | 2006-05-01 | French | Coding for customers in the rail transport chain |
65 | AFNOR NF EN ISO 10087-2006 | 2006-05-01 | French | Small craft - Craft identification - Coding system |
66 | AFNOR NF EN 301820-2006 | 2006-05-01 | French | Private Integrated Service Network (PISN) - Inter-exchange signalling protocol - Common information Additional Network Feature (ANF) (V1.2.1) |
67 | AFNOR NF EN 14802-2006 | 2006-05-01 | French | Plastics piping systems - Plastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading |
68 | AFNOR NF EN 14762-2006 | 2006-05-01 | French | Wood flooring - Sampling procedures for evaluation of conformity |
69 | AFNOR NF EN 3745-202-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202 : fibre dimensions |
70 | AFNOR NF EN 3745-401-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401 : accelerated ageing |
71 | AFNOR NF EN 3745-402-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402 : temperature cycling |
72 | AFNOR NF EN 3745-404-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404 : thermal shock |
73 | AFNOR NF EN 3745-406-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406 : cold bend test |
74 | AFNOR NF EN 3745-407-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 407 : flammability |
75 | AFNOR NF EN 3745-412-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412 : humidity resistance |
76 | AFNOR NF EN 3745-503-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503 : scrape abrasion |
77 | AFNOR NF EN 4057-202-2006 | 2006-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 202 : examination of mass and dimensions |
78 | AFNOR NF EN 4057-303-2006 | 2006-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 303 : resistance to fluids |
79 | AFNOR NF EN 4057-305-2006 | 2006-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 305 : colour fastness |
80 | AFNOR NF EN 1992-2-2006 | 2006-05-01 | French | Eurocode 2 - Design of concrete structures - Part 2 : concrete bridges - Design and detailing rules |
81 | AFNOR NF P98-050-2-2006 | 2006-05-01 | French | Underground telecommunications works for vehicular and pedestrians traffic areas - Part 2 : access covers and frames - Requirements, testing, marking |
82 | AFNOR NF EN 4057-405-2006 | 2006-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 405 : compass safe distance |
83 | AFNOR NF EN 4057-407-2006 | 2006-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 407 : verification of application tool settings |
84 | AFNOR NF EN ISO 22870-2006 | 2006-05-01 | French | Point-of-care testing (POCT) - Requirements for quality and competence |
85 | AFNOR NF EN 60060-3-2006 | 2006-05-01 | French | High voltage test techniques - Part 3 : definitions and requirements for on-site tests |
86 | AFNOR NF X41-580-8-2006 | 2006-05-01 | French | Wood preservatives - physicochemical testing - Part 8 : emulsifying suitability |
87 | AFNOR NF EN 60371-3-5-2006 | 2006-05-01 | French | Insulating materials based on mica - Part 3 : specifications for individual materials - Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) |
88 | AFNOR NF EN ISO 9994-2006 | 2006-05-01 | French | Lighters - Safety specification - Modified by NF EN ISO 9994/A1:200804 (D90-101/A1) |
89 | AFNOR NF EN ISO 14816-2006 | 2006-05-01 | French | Road transport and traffic telematics - Automatic vehicle and equipment identification - Numbering and data structure |
90 | AFNOR AC D40-003-2006 | 2006-05-01 | French | Equipment for collective restaurant - Refrigerating equipment (Rapid refrigeration and freezing cells - Negative and positive cold preservation equipment - Quick-freezers-freezer sections) - General design and construction rules for ensuring hygiene in use |
91 | AFNOR NF X41-580-1-2006 | 2006-05-01 | French | Wood preservatives - Physicochemical testing - Part 1 : physicochemical characteristics and specifications - Modified by NF X41-580-1/A1:200901 (X41-580-1/A1) |
92 | AFNOR NF X41-580-2-2006 | 2006-05-01 | French | Wood preservatives - physicochemical testing - Part 2 : resistance to oxidation |
93 | AFNOR NF X41-580-3-2006 | 2006-05-01 | French | Wood preservatives - Physicochemical testing - Part 3 : resistance to freezing |
94 | AFNOR NF X41-580-4-2006 | 2006-05-01 | French | Wood preservatives - Physicochemical testing - Part 4 : testing of reversibility after deep freezing |
95 | AFNOR NF X41-580-5-2006 | 2006-05-01 | French | Wood preservatives - physicochemical testing - Part 5 : dilution testing |
96 | AFNOR NF X41-580-6-2006 | 2006-05-01 | French | Wood preservatives - physicochemical testing - Part 6 : Suspension testing |
97 | AFNOR NF X41-580-7-2006 | 2006-05-01 | French | Wood preservatives - physicochemical testing - Part 7 : dissolution suitability testing |
98 | AFNOR NF EN 14081-3-2006 | 2006-05-01 | French | Timber structures - Strength graded structural timber with rectangular cross section - Part 3 : machine grading - Additional requirements for factory production control |
99 | AFNOR NF S61-521/A1-2006 | 2006-05-01 | French | Fire and rescue services equipment - Wheeled hose reels used for firefighting |
100 | AFNOR NF S54-042-2006 | 2006-05-01 | French | Thermometers for bath - Temperature indicators - Specifications and marks |
101 | AFNOR NF EN 12875-4-2006 | 2006-05-01 | French | Mechanical dishwashing resistance of utensils - Part 4 : rapid test for domestic ceramic articles |
102 | AFNOR NF EN 12875-5-2006 | 2006-05-01 | French | Mechanical dishwashing resistance of utensils - Part 5 : rapid test for ceramic catering articles |
103 | AFNOR NF EN 13322-1/A1-2006 | 2006-05-01 | French | Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1 : carbon steel |
104 | AFNOR NF EN 14081-1-2006 | 2006-05-01 | French | Timber structures - Strength graded structural timber with rectangular cross section - Part 1 : general requirements |
105 | AFNOR NF EN 14491-2006 | 2006-05-01 | French | Dust explosion venting protective systems |
106 | AFNOR NF EN ISO 12086-2-2006 | 2006-05-01 | French | Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties |
107 | AFNOR NF EN 60695-4-2006 | 2006-05-01 | French | Fire hazard testing - Part 4 : terminology concerning fire tests |
108 | AFNOR NF EN 60684-3-212-2006 | 2006-05-01 | French | Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 212 : heat-shrinkable polyolefin sleevings |
109 | AFNOR NF EN 60684-2/A2-2006 | 2006-05-01 | French | Flexible insulating sleeving - Part 2 : methods of test |
110 | AFNOR FD CEN/TR 15356-1-2006 | 2006-05-01 | French | Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1 : general considerations |
111 | AFNOR NF EN 12574-1-2006 | 2006-05-01 | French | Stationary waste containers - Part 1 : containers with a capacity up to 10 000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design |
112 | AFNOR FD S94-468-2006 | 2006-05-01 | French | Surgical instruments - Guide and recommendations for the quality of water in contact with the reusable metallic surgical instruments |
113 | AFNOR NF EN 9111-2006 | 2006-05-01 | French | Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001: 2000) |
114 | AFNOR NF EN 9103-2006 | 2006-05-01 | French | Aerospace series - Quality management systems - Variation management of key characteristics |
115 | AFNOR NF EN 4458-2006 | 2006-05-01 | French | Aeropace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class : 1 100 MPa (at ambient temperature) - Technical Specification |
116 | AFNOR NF EN 4165-022-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175掳C continuous - Part 022 : insertion/extraction tool for removal modules - Product standard |
117 | AFNOR NF EN 4165-017-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175掳C continuous - Part 017 : blank chimney for accessory (1 per module cavity) - Product standard |
118 | AFNOR NF EN 4165-016-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175掳C continuous - Part 016 : double oval chimney for accessory (1 per 2 modules) - Product standard |
119 | AFNOR NF EN 4165-015-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175掳C continuous - Part 015 : round chimney for accessory (1 per module cavity) - Product standard |
120 | AFNOR NF EN 4165-014-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 掳C continuous - Part 014 : shielded accessory body, 2 and 4 modules, for connectors series 2 and series 3 - Product standard |
121 | AFNOR NF EN 4165-013-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 掳C continuous - Part 013 : cable clamp 2 and 4 modules for connectors, series 2 and series 3 - Product Standard |
122 | AFNOR NF EN 4165-012-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175掳C continuous - Part 012 : flange mounting receptacle 2 and 4 modules, series 3 - Product Standard |
123 | AFNOR NF EN 3545-007-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 掳C to 175 掳C - Part 007 : cable clamp - Product standard |
124 | AFNOR NF EN 3545-004-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, with sealed and non sealed rear, plastic housing, locking device, operating temperatures -55 掳C to 175 掳C - Part 004 : Connectors with male contacts - Product standard |
125 | AFNOR NF EN 3545-003-2006 | 2006-05-01 | French | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 掳C to 175 掳C - Part 003 : connectors with female contacts - Product standard |
126 | AFNOR NF DTU 45.2-2006 | 2006-05-01 | French | Assembly work - Thermal insulation of circuits, appliances and accessories from -80 掳C to +650 掳C - Part 1-1 : contract bill of technical clauses - Part 1-2 : general criteria for selection of materials - Part 2 : contract bill of special clauses |
127 | AFNOR NF DTU 45.2 P1-1-2006 | 2006-05-01 | French | Assembly work - Thermal insulation of circuits, appliances and accessories from -80 掳C to +650 掳C - Part 1-1 : contract bill of technical clauses |
128 | AFNOR NF DTU 45.2 P1-2-2006 | 2006-05-01 | French | Assembly work - Thermal insulation of circuits, appliances and accessories from -80 掳C to +650 掳C - Part 1-2 : general criteria for selection of materials |
129 | AFNOR NF DTU 45.2 P2-2006 | 2006-05-01 | French | Assembly work - Thermal insulation of circuits, appliances and accessories from -80 掳C to +650 掳C - Part 2 : contract bill of special clauses |
130 | AFNOR NF EN 3155-003-2006 | 2006-05-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 003 : contacts, electrical, female, type A, crimp, class S - Product standard |
131 | AFNOR NF EN 2605-2006 | 2006-05-01 | French | Aerospace series - 24掳 interface for adaptors, threaded, with lockring - Geometric configuration |
132 | AFNOR NF EN 2591-220-2006 | 2006-05-01 | French | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220 : contact/coductor joint ageing by current and temperature cycling |
133 | AFNOR NF EN 2591-214-2006 | 2006-05-01 | French | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214 : lightning strike, current and voltage pulse |
134 | AFNOR NF EN 2591-100-2006 | 2006-05-01 | French | Aerospace series - Elements of electrical and optical connection - Test methods - Part 100 : general |
135 | AFNOR NF EN 60320-2-4-2006 | 2006-05-01 | French | Appliance couplers for household and similar general purposes - Part 2-4 : applicance couplers dependent on appliance weight for engagement - Modified by NF EN 60320-2-4/A1:201006 (C61-354/A1) |
136 | AFNOR NF EN 60794-2-31-2006 | 2006-05-01 | French | Optical fibre Cables - Part 2-31 : indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling |
137 | AFNOR NF EN 60794-2-21-2006 | 2006-05-01 | French | Optical fibre Cables - Part 2-21 : indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling |
138 | AFNOR NF EN ISO 4126-3-2006 | 2006-05-01 | French | Safety devices for protection against excessive pressure - Part 3 : safety valves and bursting disc safety devices in combination |
139 | AFNOR NF EN 62298-4-2006 | 2006-05-01 | French | TeleWeb application - Part 4 : hyperteletext profile |
140 | AFNOR NF EN ISO 10318-2006 | 2006-05-01 | French | Geosynthetics - Terms and definitions |
141 | AFNOR NF EN ISO 10297-2006 | 2006-05-01 | French | Transportable gas cylinders - Cylinder valves - Specification and type testing |
142 | AFNOR NF ISO 7296-1-2006 | 2006-05-01 | French | Cranes - Graphic symbols - Part 1 : general |
143 | AFNOR NF ISO 4306-3-2006 | 2006-05-01 | French | Cranes - Vocabulary - Part 3 : tower cranes |
144 | AFNOR NF ISO 9462-2006 | 2006-05-01 | French | Alpine ski-bindings - Requirements and test methods - Modified by NF ISO 9462/A1:201002 (S52-714/A1) |
145 | AFNOR NF ISO 1268-10-2006 | 2006-05-01 | French | Fibre-reinforceds plastics - Methods of producing test plates - Part 10 : injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens |
146 | AFNOR NF ISO 12795-2006 | 2006-05-01 | French | Nuclear fuel technology - Uranium dioxide powder and pellets - Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction |
147 | AFNOR NF EN 61160-2006 | 2006-05-01 | French | Design review |
148 | AFNOR NF EN 61543/A2-2006 | 2006-05-01 | French | Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility |
149 | AFNOR NF C32-102-3/A1-2006 | 2006-05-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 3 : heat resistant silicone rubber insulated cables |
150 | AFNOR NF EN 300362-2006 | 2006-05-01 | French | Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Call offer supplementary service (V1.3.1) |
151 | AFNOR NF EN 61967-4/A1-2006 | 2006-05-01 | French | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4 : measurement of conducted emissions - 1 ohm/150 ohm direct coupling method |
152 | AFNOR NF EN 301443-2006 | 2006-05-01 | French | Satellite Earth Stations and Sysems (SES) - Harmonized EN for Very Small Aperture Terminal (VSAT) - Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive (V1.3.1) |
153 | AFNOR NF EN 300392-3-2-2006 | 2006-05-01 | French | Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3 : interworking at the Inter-System Interface (ISI) - Sub-part 2 : additional Network Feature Individual Call (ANF-ISIIC) (V1.2.0) |
154 | AFNOR NF P99-332-2006 | 2006-05-01 | French | Road information and control - Alphanumeric road data transmission protocol - Testing of road dynamic equipment |
155 | AFNOR NF E63-114-2006 | 2006-05-01 | French | Tools for pressing - Square retainers and backing plates for flanged punches - Top fixing |
156 | AFNOR NF EN 1021-2-2006 | 2006-05-01 | French | Furniture - Assessment of the ignitability of upholstered furniture - Part 2 : ignition source match flame equivalent |
157 | AFNOR NF EN 13421-2006 | 2006-05-01 | French | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
158 | AFNOR NF EN 1021-1-2006 | 2006-05-01 | French | Furniture - Assessment of the ignitability of upholstered furniture - Part 1 : ignition source smouldering cigarette |
159 | AFNOR NF EN 15030-2006 | 2006-05-01 | French | Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use |
160 | AFNOR NF EN ISO 10524-1-2006 | 2006-05-01 | French | Pressure regulators for use with medical gases - Part 1 : pressure regulators and pressure regulators with flow-metering devices |
161 | AFNOR NF EN ISO 4892-2-2006 | 2006-05-01 | French | Plastics - Methods of exposure to laboratory light sources - Part 2 : xenon-arc lamps - Modified by NF EN ISO 4892-2/A1:200910 (T51-195-2/A1) |
162 | AFNOR NF EN 3475-705-2006 | 2006-05-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705 : contrast measurement |
163 | AFNOR NF EN 301257-2006 | 2006-05-01 | French | Private Integrated Services Network (PISN) - Specification, functional models and information flows - Recall supplementary service (V1.2.1) |
164 | AFNOR NF EN 3475-513-2006 | 2006-05-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 513 : deformation resistance (Installation with plastic cable ties) |
165 | AFNOR NF EN ISO 1167-1-2006 | 2006-05-01 | French | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of resistance to internal pressure - Part 1 : general method |
166 | AFNOR NF EN ISO 12402-10-2006 | 2006-05-01 | French | Personal flotation devices - Part 10 : selection and application of personal flotation devices and other relevant devices |
167 | AFNOR NF EN 4057-201-2006 | 2006-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 201 : visual examination |
168 | AFNOR NF V03-731-2006 | 2006-05-01 | French | Wheat flour - Method for the measurement of damage of starch by means of SDmatic |
169 | AFNOR NF EN ISO 12402-8-2006 | 2006-05-01 | French | Personal flotation devices - Part 8 : Accessories - Safety requirements and test methods |
170 | AFNOR NF EN 14188-3-2006 | 2006-05-01 | French | Joint fillers and sealants - Part 3 : specifications for preformed joint seals |
171 | AFNOR NF EN 301255-2006 | 2006-05-01 | French | Private Integrated Services Network (PISN) - Inter-exchange signalling protocol - Message waiting indication supplementary service (V1.2.1) |
172 | AFNOR NF C48-211 F2-2006 | 2006-05-01 | French | Fiche d'interpr茅tation de la norme NF C48-211 de f茅vrier 1989 |
173 | AFNOR NF EN 10297-2-2006 | 2006-05-01 | French | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes |
174 | AFNOR NF EN 10296-2-2006 | 2006-05-01 | French | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2 : stainless steel tubes |
175 | AFNOR NF EN 3475-416-2006 | 2006-05-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 416 : thermal stability |
176 | AFNOR NF EN 15137-2006 | 2006-05-01 | French | Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of NOGE and its hydroxy and chlorinated derivatives |
177 | AFNOR NF EN 4049-002-2006 | 2006-05-01 | French | Aerospace series - Thermocouple extension cable - Operating temperatures between - 65 掳C to 260 掳C - Part 002 : general |
178 | AFNOR XP CEN/TS 14429-2006 | 2006-05-01 | French | Characterization of waste - Leaching behaviour tests - Influence of pH on leaching with initial acid/base addition |
179 | AFNOR NF EN 3475-415-2006 | 2006-05-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 415 : rapid change of temperature |
180 | AFNOR NF EN ISO 3071-2006 | 2006-05-01 | French | Textiles - Determination of pH of aqueous extract |
181 | AFNOR NF EN 3745-513-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513 : crush resistance |
182 | AFNOR NF EN 60371-3-2-2006 | 2006-05-01 | French | Insulating materials based on mica - Part 3 : specifications for individual materials - Sheet 2 : mica paper |
183 | AFNOR NF EN 544-2006 | 2006-05-01 | French | Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods |
184 | AFNOR NF EN 3745-512-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512 : flexure endurance |
185 | AFNOR NF EN 1047-1-2006 | 2006-05-01 | French | Secure storage units - Classification and methods of test for resistance to fire - Part 1 : data cabinets and diskette inserts |
186 | AFNOR NF EN 62132-1-2006 | 2006-05-01 | French | Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1 : general conditions and definitions |
187 | AFNOR NF EN 3745-703-2006 | 2006-05-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 703 : durability of manufacturer's marking |
188 | AFNOR NF EN 3475-414-2006 | 2006-05-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414 : differential scanning calorimeter (DSC test) |
189 | AFNOR NF EN 301360-2006 | 2006-05-01 | French | Satellite Earth Stations and Systems (SES) - Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards geostationary satellites in the 27,5 GHz to 29,5 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE Directive (V1.2.1) |
190 | AFNOR NF EN 3475-411-2006 | 2006-05-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411 : resistance to fluids |
191 | AFNOR NF ISO 691-2006 | 2006-05-01 | French | Assembly tools for screws and nuts - Wrench and socket openings - Tolerances for general use |
192 | AFNOR NF EN 12697-40-2006 | 2006-05-01 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 40 : in-situ drainability |
193 | AFNOR NF EN ISO 1167-2-2006 | 2006-05-01 | French | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2 : preparation of pipe test pieces |
194 | AFNOR NF EN 771-6-2006 | 2006-05-01 | French | Specification for masonry units - Part 6 : natural stone masonry units |
195 | AFNOR NF ISO 1268-11-2006 | 2006-05-01 | French | Fibre-reinforced plastics - Methods of producing test plates - Part 11 : injection moulding of BMC and other long-fibre moulding compounds - Small plates |
196 | AFNOR NF EN 1860-1/A1-2006 | 2006-04-01 | French | Appliances, solid fuels and firelighters for barbecuing - Part 1 : barbecues burning solid fuels - Requirements and test methods |
197 | AFNOR NF EN 14585-1-2006 | 2006-04-01 | French | Corrugated metal hose assemblies for pressure applications - Part 1 : requirements |
198 | AFNOR NF E63-137-2006 | 2006-04-01 | French | Tools for pressing - Precompressed assemblies for medium rate - General specifications |
199 | AFNOR NF EN 3475-706-2006 | 2006-04-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706 : laser markability |
200 | AFNOR NF EN 13480-5/AC6-2006 | 2006-04-01 | French | Corrigendum 6 to standard NF EN 13480-5:2002 |
201 | AFNOR NF EN 13434-2006 | 2006-04-01 | French | Devices to prevent pollution by backflow of potable water - Mechanical disconnector hydraulic actuated - Familiy G - Type B |
202 | AFNOR NF EN 13480-4/AC6-2006 | 2006-04-01 | French | Corrigendum 6 to standard NF EN 13480-4:2002 |
203 | AFNOR NF EN 13433-2006 | 2006-04-01 | French | Devices to prevent pollution by backflow of potable water - Mechanical disconnector direct actuated - Familiy G, type A |
204 | AFNOR NF EN 1657-2006 | 2006-04-01 | French | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticical activity of chemical desinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) |
205 | AFNOR NF EN 61267-2006 | 2006-04-01 | French | Medical diagnostic X-ray equipment - Radiation conditions for use in the determination of characteristics |
206 | AFNOR NF T60-630-2006 | 2006-04-01 | French | Petroleum products and lubricants - Life time of greases in rolling bearings, at high temperatures |
207 | AFNOR NF T60-629-2006 | 2006-04-01 | French | Petroleum products and lubricants - Low temperature torque of ball bearing greases |
208 | AFNOR NF T60-628-2006 | 2006-04-01 | French | Petroleum products and lubricants - Evaluation of the action of greases on elastomers |
209 | AFNOR NF ISO 13373-2-2006 | 2006-04-01 | French | Condition monitoring and diagnostics of machines - Vibration condition monitoring - Part 2 : processing, analysis and presentation of vibration data |
210 | AFNOR NF EN 4175-2006 | 2006-04-01 | French | Aerospace series - Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series |
211 | AFNOR UTE C17-108-2006 | 2006-04-01 | French | Simplified lightning risk analysis |
212 | AFNOR NF EN 2002-001-2006 | 2006-04-01 | French | Aerospace series - Metallic materials - Test methods - Part 001 : tensile testing at ambient temperature |
213 | AFNOR NF EN 2002-002-2006 | 2006-04-01 | French | Aerospace series - Metallic materials - Test methods - Part 002 : tensile testing at elevated temperature |
214 | AFNOR NF EN ISO 11997-1-2006 | 2006-04-01 | French | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1 : wet (salt fog)/dry/humidity |
215 | AFNOR NF X70-100-2-2006 | 2006-04-01 | French | Fire tests - Analysis of gaseous effluents - Part 2 : tubular furnace thermal degradation method |
216 | AFNOR NF EN ISO 11997-2-2006 | 2006-04-01 | French | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2 : wet (salt fog)/dry/humidity/UV light |
217 | AFNOR NF X70-100-1-2006 | 2006-04-01 | French | Fire tests - Analysis of gaseous effluents - Part 1 : methods for analysing gases stemming from thermal degradation |
218 | AFNOR NF EN ISO 6504-1-2006 | 2006-04-01 | French | Paints and varnishes - Determination of hiding power - Part 1 : Kubelka-Munk method for white and light-coloured paints |
219 | AFNOR NF ISO 3384-2006 | 2006-04-01 | French | Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures |
220 | AFNOR NF ISO 17874-2-2006 | 2006-04-01 | French | Remote-handling devices for radioactive materials - Part 2 : mechanical master-slave manipulators |
221 | AFNOR NF ISO 3519-2006 | 2006-04-01 | French | Oil of lime distilled, Mexican type (Citrus aurantifolia (Christm.) Swingle) |
222 | AFNOR NF EN ISO 6506-1-2006 | 2006-04-01 | French | Metallic materials - Brinell hardness test - Part 1 : test method |
223 | AFNOR NF ISO 21390-2006 | 2006-04-01 | French | Oil of wintergreen, China [Gaultheria yunnanensis (Franch) Rehd.], redistilled |
224 | AFNOR NF ISO 16797-2006 | 2006-04-01 | French | Nuclear energy - Soxhlet-mode chemical durability test - Application to vitrified matrixes for high-level radioactive waste |
225 | AFNOR NF EN 1040-2006 | 2006-04-01 | French | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) |
226 | AFNOR NF EN 2084-2006 | 2006-04-01 | French | Aerospace series - Cables, electric, single-core, general purpose, with conductors in copper or copper alloy - Technical specification |
227 | AFNOR NF EN 4303-2006 | 2006-04-01 | French | Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
228 | AFNOR NF EN 61935-1-2006 | 2006-04-01 | French | Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 1 : installed cabling |
229 | AFNOR NF EN 4304-2006 | 2006-04-01 | French | Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness) |
230 | AFNOR NF EN 4306-2006 | 2006-04-01 | French | Aerospace series - Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
231 | AFNOR NF EN ISO 22112-2006 | 2006-04-01 | French | Dentistry - Artificial teeth for dental prostheses |
232 | AFNOR NF ISO 18115-2006 | 2006-04-01 | French | Surface chemical analysis - Vocabulary - Modified by NF ISO 18115/A1:200807 (X21-052/A1),NF ISO 18115/A2:200808 (X21-052/A2) |
233 | AFNOR NF EN ISO 22254-2006 | 2006-04-01 | French | Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection |
234 | AFNOR NF EN 4307-2006 | 2006-04-01 | French | Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness) |
235 | AFNOR NF EN 413-2-2006 | 2006-04-01 | French | Masonry cement - Part 2 : test methods |
236 | AFNOR NF EN 14427/A1-2006 | 2006-04-01 | French | Transportable refillable composite cylinders for LPG - Design and construction |
237 | AFNOR NF EN ISO 4625-2-2006 | 2006-04-01 | French | Binders for paints and varnishes - Determination of softening point - Part 2 : cup-and-ball method |
238 | AFNOR NF EN 60745-2-17-2006 | 2006-04-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-17 : particular requirements for routers and trimmers - Modified by NF EN 60745-2-17/A11:200708 (C75-745-2-17/A11) |
239 | AFNOR NF EN 4590-2006 | 2006-04-01 | French | Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated |
240 | AFNOR NF EN 61935-2-2006 | 2006-04-01 | French | Testing of balanced communication cabling in accordance with standards series EN 50173 - Part 2 : patch cords and work area cords |
241 | AFNOR NF EN ISO 4625-1-2006 | 2006-04-01 | French | Binders for paints and varnishes - Determination of softening point - Part 1 : ring-and-ball method |
242 | AFNOR NF EN 4591-2006 | 2006-04-01 | French | Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS2 lubricated - Classification : 1 550 MPa (at ambient temperature) / 315掳C |
243 | AFNOR NF EN 61951-1/A1-2006 | 2006-04-01 | French | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 1 : nickel-cadmium |
244 | AFNOR CWA 15535-2-2006 | 2006-04-01 | French | Multi-application multi-issuer citizen card scheme standardisation - Part 2 : scheme architecture and implementation solution |
245 | AFNOR CWA 15537-2006 | 2006-04-01 | French | Network Enabled Abilities - Service-Oriented Architecture for civilian and military crisis management |
246 | AFNOR NF EN 300392-2-2006 | 2006-04-01 | French | Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 2 : aire Interface (AI)(V2.5.2) |
247 | AFNOR NF ISO 17873-2006 | 2006-04-01 | French | Nuclear facilities - Criteria for the design and operation of ventilation systems for nuclear installations other than nuclear reactors |
248 | AFNOR NF EN 14621-2006 | 2006-04-01 | French | Textiles - Multifilament yarns - Methods of test for textured or non-textured filament yarns |
249 | AFNOR NF EN 12697-1-2006 | 2006-04-01 | French | Bituminous mixtures - Test methods for mix asphalt - Part 1 : soluble binder content |
250 | AFNOR NF EN 1860-3/A1-2006 | 2006-04-01 | French | Appliances, solid fuels and firelighters for barbecuing - Part 3 : firelighters for igniting solid fuels for use in barbecue appliances - Requirements and test methods |
251 | AFNOR NF ISO 17973-2006 | 2006-04-01 | French | Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis |
252 | AFNOR NF ISO 16700-2006 | 2006-04-01 | French | Microbeam analysis - Scanning electron microscopy - Guidelines for calibrating image magnification |
253 | AFNOR NF ISO 17560-2006 | 2006-04-01 | French | Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth profiling of boron in silicon |
254 | AFNOR FD CEN/TR 14585-2-2006 | 2006-04-01 | French | Corrugated metal hose assemblies for pressure applications - Part 2 : guidance on the use of conformity assessment procedures |
255 | AFNOR FD CEN/TR 14819-2-2006 | 2006-04-01 | French | Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2 : other funicular railways and other installations |
256 | AFNOR BP X10-042-2006 | 2006-04-01 | French | Sensory characterisation of materials - Practical recommendations for visual analysis from the raw material to the finished product |
257 | AFNOR FD CEN/TR 15175-2006 | 2006-04-01 | French | Characterization of sludges - Protocol for organizing and conducting inter-laboratory tests of methods for chemical and microbiological analysis of sludges |
258 | AFNOR FD CEN/TR 15214-1-2006 | 2006-04-01 | French | Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soils improvers, growing media and biowastes - Part 1 : membrane filtration method for quantification |
259 | AFNOR FD CEN/TR 15214-2-2006 | 2006-04-01 | French | Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and biowastes - Part 2 : miniaturised method (Most Probable Number) by inoculation in liquid medium |
260 | AFNOR FD CEN/TR 15214-3-2006 | 2006-04-01 | French | Characterization of sludges - Detection and enumeration of Escherichia coli in sludges, soils, soil improvers, growing media and bio-wastes - Part 3 : macromethod (Most Probable Number) in liquid medium |
261 | AFNOR FD CEN/TR 15215-1-2006 | 2006-04-01 | French | Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 1 : membrane filtration method for quantitative resuscitation of sub-lethally stressed bacteria (to confirm efficacy of log drop treatment procedures) |
262 | AFNOR FD CEN/TR 15215-2-2006 | 2006-04-01 | French | Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 2 : liquid enrichment method in selenite-cystine medium followed by Rapport-Vassiliadis for semi-quantitative Most Probable Number (MPN) determination |
263 | AFNOR NF EN 14884-2006 | 2006-04-01 | French | Air quality - Stationary source emissions - Determination of total mercury : automated measuring systems |
264 | AFNOR NF EN ISO 6506-4-2006 | 2006-04-01 | French | Metallic materials - Brinell hardness test - Part 4 : table of hardness values |
265 | AFNOR NF EN 62132-5-2006 | 2006-04-01 | French | Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 5 : workbench Faraday cage method |
266 | AFNOR NF EN 1866-2006 | 2006-04-01 | French | Mobile fire extinguishers |
267 | AFNOR NF EN 2714-013-2006 | 2006-04-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55掳C and 260掳C - Part 013 : DR family, screened (spiral) and jacketed - UV laser printable - product standard |
268 | AFNOR NF EN 14899-2006 | 2006-04-01 | French | Characterisation of waste - Sampling of waste materials - Framework for the preparation and application of a sampling plan |
269 | AFNOR NF EN 12259-1 + A1/A3-2006 | 2006-04-01 | French | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 1 : sprinklers |
270 | AFNOR NF EN 12259-2/A2-2006 | 2006-04-01 | French | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 2 : wet alarm valve assemblies |
271 | AFNOR NF EN 60317-30/A2-2006 | 2006-04-01 | French | Specifications for particular types of winding wires - Part 30 : polyimide enamelled rectangular copper wire, class 220 |
272 | AFNOR NF EN 12976-1-2006 | 2006-04-01 | French | Thermal solar systems and components - Factory made systems - Part 1 : general requirements |
273 | AFNOR NF EN 12976-2-2006 | 2006-04-01 | French | Thermal solar systems and components - Factory made systems - Part 2 : test methods |
274 | AFNOR NF EN 15136-2006 | 2006-04-01 | French | Materials and articles in contact with foodstuffs - Certain epoxy derivatives subject to limitation - Determination of BADGE, BFDGE and their hydroxy and chlorinated derivatives in food simulants |
275 | AFNOR NF E63-142-2006 | 2006-04-01 | French | Tools for pressing - Roller cams - General specifications |
276 | AFNOR NF EN 12666-1-2006 | 2006-04-01 | French | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system |
277 | AFNOR NF L06-383-2006 | 2006-04-01 | French | Aerospace series - Welded and brazed assemblies for aerospace constructions - Resistance spot or seam welded assemblies - Quality of welded assemblies |
278 | AFNOR NF P98-170-2006 | 2006-04-01 | French | Concrete pavements - Construction and controls |
279 | AFNOR NF P98-050-1-2006 | 2006-04-01 | French | Underground telecommunications works for vehicular and pedestrians traffic areas - Part 1 : telecommunications chambers - Requirements, testing, marking |
280 | AFNOR NF ISO 16000-4-2006 | 2006-04-01 | French | Indoor air - Part 4 : determination of formaldehyde - Diffusive sampling method |
281 | AFNOR NF T60-626-2006 | 2006-04-01 | French | Petroleum products and lubricants - Mechanical stability of greases in presence of water |
282 | AFNOR NF T60-190-2006 | 2006-04-01 | French | Petroleum products and lubricants - Roll stability of lubricating grease |
283 | AFNOR NF T54-094-2006 | 2006-04-01 | French | Plastics piping systems made of unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) for conveyance under pressure of non gaseous fluids - Fittings - Determination of resistance to alternate pressure stress |
284 | AFNOR NF U44-051-2006 | 2006-04-01 | French | Organic soil improvers - Designations, specifications and marking - Modified by NF U44-051/A1:201012 (U44-051/A1) |
285 | AFNOR XP S61-522-2006 | 2006-04-01 | French | Firefighting and rescue service equipment - Axial feed rotary hose reels permanently installed on vehicles |
286 | AFNOR XP S61-512-2006 | 2006-04-01 | French | Firefighting and rescue service vehicles - Firefighting and rescue tenders - Road rescue water tender types FPTLSR and FPTSR |
287 | AFNOR XP X30-445-2006 | 2006-04-01 | French | Household and related waste - Constitution of a sample of bulk household and related waste |
288 | AFNOR NF ISO 3761-2006 | 2006-04-01 | French | Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.) |
289 | AFNOR NF ISO 2108-2006 | 2006-04-01 | French | Information and documentation - International standard book number (ISBN) |
290 | AFNOR NF ISO 2144-2006 | 2006-04-01 | French | Paper, board and pulps - Determination of residue (ash) on ignition at 900 掳C |
291 | AFNOR NF G39-012-2006 | 2006-04-01 | French | Properties of textiles - Textiles and polymeric materials having anti-acarid properties - Measurement of the allergen DER P 1, marker of mit allergens |
292 | AFNOR NF EN ISO 3834-1-2006 | 2006-04-01 | French | Quality requirements for fusion welding of metallic materials - Part 1 : criteria for the selection of the appropriate level of quality requirements |
293 | AFNOR NF EN ISO 3834-2-2006 | 2006-04-01 | French | Quality requirements for fusion welding of metallic materials - Part 2 : comprehensive quality requirements |
294 | AFNOR NF EN ISO 3834-3-2006 | 2006-04-01 | French | Quality requirements for fusion welding of metallic materials - Part 3 : standard quality requirements |
295 | AFNOR NF EN ISO 3834-4-2006 | 2006-04-01 | French | Quality requirements for fusion welding of metallic materials - Part 4 : elementary quality requirements |
296 | AFNOR NF EN ISO 3834-5-2006 | 2006-04-01 | French | Quality requirements for fusion welding of metallic materials - Part 5 : documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
297 | AFNOR NF EN 13321-1-2006 | 2006-04-01 | French | Open data communication in building automation, controls and building management - Home and building electronic system - Part 1 : product and system requirements |
298 | AFNOR NF EN 13480-2/AC6-2006 | 2006-04-01 | French | Corrigendum 6 to standard NF EN 13480-2:2002 |
299 | AFNOR NF EN 13480-3/AC6-2006 | 2006-04-01 | French | Corrigendum 6 to standard NF EN 13480-3:2002 |
300 | AFNOR NF EN 13480-6/A1-2006 | 2006-04-01 | French | Metallic industrial piping - Part 6 : additional requirements for buried piping |
301 | AFNOR NF EN 14337-2006 | 2006-04-01 | French | Heating Systems in buildings - Design and installation of direct electrical room heating systems |
302 | AFNOR NF EN 14782-2006 | 2006-04-01 | French | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
303 | AFNOR NF EN 14959-2006 | 2006-04-01 | French | Touch and close fasteners - Determination of resistance to fraying after washing |
304 | AFNOR NF EN 62052-21-2006 | 2006-04-01 | French | Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21 : tariff and load control equipment |
305 | AFNOR NF EN 62054-11-2006 | 2006-04-01 | French | Electricity metering (a.c.) - Tariff and load control - Part 11 : particular requirements for electronic ripple control receivers |
306 | AFNOR NF EN 62054-21-2006 | 2006-04-01 | French | Electricity metering (a.c.) - Tariff and load control - Part 21 : particular requirements for time switches |
307 | AFNOR NF EN 10184-2006 | 2006-04-01 | French | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
308 | AFNOR NF EN ISO 14680-3-2006 | 2006-04-01 | French | Paints and varnishes - Determination of pigment content - Part 3 : filtration method |
309 | AFNOR NF EN ISO 14680-2-2006 | 2006-04-01 | French | Paints and varnishes - Determination of pigment content - Part 2 : ashing method |
310 | AFNOR NF EN ISO 14680-1-2006 | 2006-04-01 | French | Paints and varnishes - Determination of pigment content - Part 1 : centrifuge method |
311 | AFNOR NF EN 3475-307-2006 | 2006-04-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 307 : corona extinction voltage |
312 | AFNOR NF EN 3373-013-2006 | 2006-04-01 | French | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 013 : in-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260掳C - Product standard |
313 | AFNOR NF EN 3373-012-2006 | 2006-04-01 | French | Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - Part 012 : in-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 150掳C - Product Standard |
314 | AFNOR NF EN 2645-2006 | 2006-04-01 | French | Aerospace series - Lockrings for adaptors, threaded, with lockring - Dimensions |
315 | AFNOR NF EN 1564/A1-2006 | 2006-04-01 | French | Founding - Austempered ductile cast irons |
316 | AFNOR NF EN 1103-2006 | 2006-04-01 | French | Textiles - Fabrics for apparel - Detailed procedure to determine the burning behaviour |
317 | AFNOR NF EN 61754-5-2006 | 2006-04-01 | French | Fibre optic connector interfaces - Part 5 : type MT connector family |
318 | AFNOR NF EN 61754-10-2006 | 2006-04-01 | French | Fibre optic connector interfaces - Part 10 : type Mini-MPO connector family |
319 | AFNOR NF EN 61300-3-1-2006 | 2006-04-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1 : examinations and measurements - Visual examination |
320 | AFNOR CWA 15535-1-2006 | 2006-04-01 | French | Multi-application multi-issuer citizen card scheme Standardisation - Part 1 : business model agreement |
321 | AFNOR NF EN 61338-1-4-2006 | 2006-04-01 | French | Waveguide type dielectric resonators - Part 1-4 : general information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimeter-wave frequency |
322 | AFNOR FD CEN/CR 14380-2006 | 2006-04-01 | French | Lighting applications - Tunnel lighting |
323 | AFNOR FD DTU 34.3-2006 | 2006-04-01 | French | Building works - Choice of industrial, commercial and garage doors depending on their exposure to wind - Guide for prime contractors |
324 | AFNOR NF EN 60384-2-2006 | 2006-04-01 | French | Fixed capacitors for use in electronic equipment - Part 2 : sectional specification : Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors |
325 | AFNOR NF EN 60384-2-1-2006 | 2006-04-01 | French | Fixed capacitors for use in electronic equipment - Part 2-1 : blank detail specification : Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ |
326 | AFNOR FD E86-000-2006 | 2006-04-01 | French | Pressure equipment - Harmonized standards for application of Directive 97/23/EC - Guidelines |
327 | AFNOR FD X30-023-2006 | 2006-04-01 | French | Sustainable development - Social responsibility - SD 21000 application document - Guide for the identification and the hierarchical organisation of the stakes of sustainable development |
328 | AFNOR FD X50-137-2006 | 2006-04-01 | French | Project management - Cost management |
329 | AFNOR FD X50-138-2006 | 2006-04-01 | French | Project management - Time-related management - Organisation, Planing? Coordination |
330 | AFNOR FD X50-193-2006 | 2006-04-01 | French | Management tools - Mutually beneficial relationships : driving force behind durable - Guidelines for an approach to mutually growth beneficial relationships between organisations |
331 | AFNOR NF E63-085-2006 | 2006-04-01 | French | Tools for pressing - Reversible plat dies |
332 | AFNOR NF EN 153-2006 | 2006-04-01 | French | Methods of measuring the energy consumption of electric mains operated household refrigerators, frozen food storage cabinets, food freezers and their combinations, together with associated characteristics |
333 | AFNOR NF EN 196-1-2006 | 2006-04-01 | French | Methods of testing cement - Part 1 : determination of strength |
334 | AFNOR NF EN 196-2-2006 | 2006-04-01 | French | Methods of testing cement - Part 2 : chemical analysis of cement |
335 | AFNOR NF EN 196-5-2006 | 2006-04-01 | French | Methods of testing cement - Part 5 : pozzolanicity test for pozzolanic cement |
336 | AFNOR NF T90-431/A1-2006 | 2006-04-01 | French | Water quality - Detection and enumeration of Legionella spp and Legionella pneumophilia - Method by direct inoculation and after concentration by membrane filtration or centrifugation |
337 | AFNOR NF EN 2267-002-2006 | 2006-04-01 | French | Aerospace series - Cables, electrical, for general purposes - Operating temperatures between - 55掳C and 260掳C - Part 002 : general |
338 | AFNOR NF EN 14979-2006 | 2006-04-01 | French | Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 |
339 | AFNOR NF EN 15002-2006 | 2006-04-01 | French | Characterization of waste - Preparation of test portions from the laboratory sample |
340 | AFNOR NF EN 2266-002-2006 | 2006-04-01 | French | Aerospace series : Cables, electrical, for general purpose - Operating temperatures between -55 掳C and 200 掳C - Part 002 : general |
341 | AFNOR NF EN 1744-4-2006 | 2006-04-01 | French | Tests for chemical properties of agregates - Part 4 : determination of water susceptibility of fillers for bituminous mixtures |
342 | AFNOR NF EN 352-5/A1-2006 | 2006-04-01 | French | Hearing protectors - Safety requirements and testing - Part 5 : active noise reduction ear-muffs |
343 | AFNOR NF ISO 14595-2006 | 2006-04-01 | French | Microbeam analysis - Electron probe microanalysis - Guidelines for the specification of certified reference materials (CRMs) |
344 | AFNOR NF EN ISO 21569-2006 | 2006-04-01 | French | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods |
345 | AFNOR NF EN 14496-2006 | 2006-04-01 | French | Gypsum based adhesives for thermal/acoustic insulation comosite panels and plasterboards - Definitions, requirements and test methods |
346 | AFNOR NF S61-518-2006 | 2006-04-01 | French | Firefighting and rescue service vehicles - Firefighting and rescue appliances - CCF type pumping appliances |
347 | AFNOR NF EN 12574-3-2006 | 2006-04-01 | French | Stationary waste containers - Part 3 : safety and health requirements |
348 | AFNOR FD ISO/TS 8611-2-2006 | 2006-04-01 | French | Pallets for materials handling - Flat pallets - Part 2 : performance requirements and selection of tests |
349 | AFNOR NF EN ISO 2814-2006 | 2006-04-01 | French | Paints and varnishes - Comparison of contrast ratio (hiding power) of paints of the same type and colour |
350 | AFNOR NF EN ISO 105-C12-2006 | 2006-04-01 | French | Textiles - Tests for colour fastness - Part C12 : colour fastness to industrial laundering |
351 | AFNOR NF EN ISO 11192-2006 | 2006-04-01 | French | Small craft - Graphical symbols |
352 | AFNOR NF EN ISO 2419-2006 | 2006-04-01 | French | Leather - Physical and mechanical tests - Sample preparation and conditioning |
353 | AFNOR NF EN 61300-2-12-2006 | 2006-04-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12 : tests - Impact |
354 | AFNOR FD CEN/TR 15215-3-2006 | 2006-04-01 | French | Characterization of sludges - Detection and enumeration of Salmonella spp. in sludges, soils, soil improvers, growing media and biowastes - Part 3 : presence/absence method by liquid enrichment in peptone-novobiocin medium followed by Rapport-Vassiliadis |
355 | AFNOR NF ISO 14707-2006 | 2006-04-01 | French | Surface chemical analysis - Glow discharge optical emission spectrometry (GD-OES) - Introduction to use |
356 | AFNOR NF EN 301489-32-2006 | 2006-04-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 32 : specific conditions for Ground and Wall Probing Radar applications (V1.1.1) |
357 | AFNOR NF EN ISO 7998-2006 | 2006-04-01 | French | Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary |
358 | AFNOR NF ISO 5834-3-2006 | 2006-04-01 | French | Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 3 : accelerated ageing methods |
359 | AFNOR NF ISO 289-1-2006 | 2006-04-01 | French | Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 1 : determination of Mooney viscosity |
360 | AFNOR NF EN 60794-2-11-2006 | 2006-04-01 | French | Optical fibre Cables - Part 2-11 : indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling |
361 | AFNOR NF S61-527-2006 | 2006-04-01 | French | Firefighting and rescue service vehicles - Rescue tenders - Road rescue appliances |
362 | AFNOR XP CEN/TS 14818-2006 | 2006-04-01 | French | Entreprise integration - Decisional reference model |
363 | AFNOR NF EN 2607-2006 | 2006-04-01 | French | Aerospace series - O-rings for adaptors, threaded, with lockring - Survey |
364 | AFNOR NF ISO 14837-1-2006 | 2006-04-01 | French | Mechanical vibration - Ground-borne noise and vibration arising from rail systems - Part 1 : general guidance |
365 | AFNOR NF EN ISO 15715-2006 | 2006-04-01 | French | Binders for paints and varnishes - Determination of turbidity |
366 | AFNOR NF EN 301489-31-2006 | 2006-04-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services - Part 31 : specific conditions for equipment in the 9 to 315 kHz band for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral devices (ULP-AMI-P) (V1.1.1) |
367 | AFNOR NF ISO 10981-2006 | 2006-04-01 | French | Nuclear fuel technology - Determination of uranium in reprocessing-plant dissolver solution - Liquid chromatography method |
368 | AFNOR CWA 15533-2006 | 2006-04-01 | French | A model for the classification of quality approaches in eLearning |
369 | AFNOR NF EN 2591-609-2006 | 2006-04-01 | French | Aerospace series - Elements of electrical and optical connection - Test methods - Part 609 : optical elements - Effectiveness of cable attachment - Cable cyclic flexing |
370 | AFNOR NF EN 2591-515-2006 | 2006-04-01 | French | Aerospace series - Elements of electrical and optical connection - Test methods - Part 515 : hydrolytic stability |
371 | AFNOR NF EN 2591-423-2006 | 2006-04-01 | French | Aerospace series - Elements of electrical and optical connection - Test methods - Part 423 : connector rear accessories thread strength |
372 | AFNOR NF A36-712-6-2006 | 2006-04-01 | French | Unpackaged steels - Metallic coated flat steel products intended for contact with foodstuffs, products and beverages intended for human and animal consumption - Part 6 : aluminium and zinc alloy coated (non stainless) steels |
373 | AFNOR NF EN 2591-212-2006 | 2006-04-01 | French | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212 : surface transfer impedance |
374 | AFNOR NF EN 14970-2006 | 2006-04-01 | French | Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics |
375 | AFNOR NF EN 14971-2006 | 2006-04-01 | French | Textiles - Knitted fabrics - Determination of number of stitches per unit length and unit area |
376 | AFNOR NF EN 61290-1-3-2006 | 2006-04-01 | French | Optical amplifier - Test methods - Part 1-3 : power and gain parameters - Optical power meter method |
377 | AFNOR NF EN ISO 10272-1-2006 | 2006-04-01 | French | Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 1 : detection method |
378 | AFNOR NF EN ISO 19739-2006 | 2006-04-01 | French | Natural gas - Determination of sulfur compounds using gas chromatography |
379 | AFNOR NF EN 1275-2006 | 2006-04-01 | French | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) |
380 | AFNOR NF EN ISO 11114-4-2006 | 2006-04-01 | French | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4 : test methods for selecting metallic materials resistant to hydrogen embrittlement |
381 | AFNOR NF EN 300019-2-7-2006 | 2006-04-01 | French | Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 2-7 : specification of environmental tests - Portable and non-stationary use (V3.0.1) |
382 | AFNOR NF EN 3719-2006 | 2006-04-01 | French | Aerospace series - Aluminium or aluminium alloy conductors for electrical cables - Product standard |
383 | AFNOR NF EN 40-4-2006 | 2006-04-01 | French | Lighting columns - Part 4 : requirements for reinforced and prestressed concrete lighting columns |
384 | AFNOR NF EN 61290-1-2-2006 | 2006-04-01 | French | Optical amplifiers - Test methods - Part 1-2 : power and gain parameters - Electrical spectrum analyzer method |
385 | AFNOR NF EN 2336-2006 | 2006-04-01 | French | Aerospaces series - Bearings, spherical plain in steel with assembly slots - Dimensions and loads |
386 | AFNOR NF EN 2267-010-2006 | 2006-04-01 | French | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55掳C and 260掳C - Part 010 : DR Family, single UV laser printable - Product standard |
387 | AFNOR NF S61-515-2006 | 2006-04-01 | French | Firefighting and rescue service vehicles - Firefighting and rescue appliances - Pumping appliances : VPI/FPTL/FPT |
388 | AFNOR NF EN 14519-2006 | 2006-04-01 | French | Solid softwood panelling and cladding - Machine profiles with tongue and groove |
389 | AFNOR NF EN 62271-110-2006 | 2006-03-01 | French | High-voltage switchgear and controlgear - Part 110 : inductive load switching |
390 | AFNOR NF EN 50363-9-1-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1 : miscellaneous insulating compounds - Cross-linked polyvinyl chloride (XLPVC) |
391 | AFNOR NF EN 71-5/A1-2006 | 2006-03-01 | French | Safety of toys - Part 5 : chemical toys (sets) other than experimental sets |
392 | AFNOR NF EN ISO 21007-2-2006 | 2006-03-01 | French | Gas cylinders - Identification and marking using radio frequency identification technology - Part 2 : numbering schemes for radio frequency identification |
393 | AFNOR NF EN 680-2006 | 2006-03-01 | French | Determination of the drying shrinkage of autoclaved aerated concrete |
394 | AFNOR NF EN 2602-2006 | 2006-03-01 | French | Aerospace series - Ports for adaptors, threaded, with lockring - Geometric configuration |
395 | AFNOR NF EN 60384-16-2006 | 2006-03-01 | French | Fixed capacitors for use in electronic equipment - Part 16 : sectional specification : fixed metallized polypropylene film dielectric d.c. capacitors |
396 | AFNOR NF EN 50363-4-1-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1 : PVC sheathing compounds |
397 | AFNOR NF EN 50363-10-1-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1 : miscellaneous sheathing compounds - Cross-linked polyvinyl chloride (XLPVC) |
398 | AFNOR NF EN 15088-2006 | 2006-03-01 | French | Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery |
399 | AFNOR NF EN 71-11-2006 | 2006-03-01 | French | Safety of toys - Part 11 : organic chemical compounds - Methods of analysis |
400 | AFNOR NF EN 50363-4-2-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2 : PVC covering compounds |
401 | AFNOR NF EN 2608-2006 | 2006-03-01 | French | Aerospace series - Installation and removal requirements for 8掳30' adaptors, threaded, with lockring |
402 | AFNOR NF EN ISO 11073-30200-2006 | 2006-03-01 | French | Health informatics - Point-of-care medical device communication - Part 30200 : transport profile - Cable connected |
403 | AFNOR NF EN 50363-2-2-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2 : cross-linked elastomeric covering compounds |
404 | AFNOR NF EN 50363-10-2-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2 : miscellaneous sheathing compounds - Thermoplastic polyurethane |
405 | AFNOR NF EN 54-10/A1-2006 | 2006-03-01 | French | Fire detection and fire alarm systems - Part 10 : flame detectors - point detectors |
406 | AFNOR NF EN 12863/A1-2006 | 2006-03-01 | French | Transportable gas cylinders - Periodic inspection and maintenance of dissolved acetylene cylinders |
407 | AFNOR NF EN 14841-2006 | 2006-03-01 | French | LPG equipment and accessories - Discharge procedures for LPG rail tankers |
408 | AFNOR NF EN 2267-003-2006 | 2006-03-01 | French | Aerospace series - Cables, electrical, for general purposes - Operating temperatures between - 55掳C and 260掳C - Part 003 : ink jet printable - Product standard |
409 | AFNOR NF EN 50363-2-1-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1 : cross-linked elastomeric sheathing compounds |
410 | AFNOR NF EN 2603-2006 | 2006-03-01 | French | Aerospace series - Port ends for adaptors, threaded, with lockring - Geometric configuration |
411 | AFNOR NF EN 54-17-2006 | 2006-03-01 | French | Fire detection and fire alarm systems - Part 17 : short-circuit isolators |
412 | AFNOR NF EN 2335-2006 | 2006-03-01 | French | Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads |
413 | AFNOR NF EN 54-18-2006 | 2006-03-01 | French | Fire detection and fire alarm systems - Part 18 : input/output devices |
414 | AFNOR NF EN 2267-007-2006 | 2006-03-01 | French | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55掳C and 260掳C - Part 007 : DMA family, single ink-jet printable and multicore assembly - Product standard |
415 | AFNOR NF EN 14840-2006 | 2006-03-01 | French | Joint fillers and sealants - Test methods for preformed joint seals |
416 | AFNOR NF EN 14836-2006 | 2006-03-01 | French | Synthetic surfaces for outdoor sports areas - Exposure to artificial weathering |
417 | AFNOR NF EN 60539-1-2006 | 2006-03-01 | French | Directly heated negative temperature coefficient thermistors - Part 1 : Generic specification |
418 | AFNOR NF EN 2604-2006 | 2006-03-01 | French | Aerospace series - 8 掳30' interface for adaptors, threaded, with lockring - Geometric configuration |
419 | AFNOR NF EN 3347-2006 | 2006-03-01 | French | Aerospace series - Aluminium alloy AL-P2024 - T8511 - Extruded bar and section - a or D < or = 150 mm with peripheral coarse grain control |
420 | AFNOR NF EN 50363-5-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 5 : halogen-free, cross-linked insulating compounds |
421 | AFNOR NF EN 14663-2006 | 2006-03-01 | French | Foodstuffs - Determination of vitamin B6 (including its glycosylated forms) by HPLC |
422 | AFNOR NF EN 50363-6-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cableS - Part 6 : halogen-free, cross-linked sheathing compounds |
423 | AFNOR NF EN 3344-2006 | 2006-03-01 | French | Aerospace series - Aluminium alloy AL-P7050- - T76511 - Extruded bar and section - a or D < or = 150 mm with peripheral coarse grain control |
424 | AFNOR NF EN 60684-3-214-2006 | 2006-03-01 | French | Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 214 : heat-shrinkable, polyolefin sleeving, not flame-retarded, shrink ratio 3 :1 - Thick and medium wall |
425 | AFNOR NF EN ISO 4098-2006 | 2006-03-01 | French | Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter |
426 | AFNOR NF ISO 8900-2006 | 2006-03-01 | French | Oil of bergamot petitgrain [Citrus bergamia (Risso et Poit.)] |
427 | AFNOR NF EN 50363-1-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 1 : cross-linked elastomeric insulating compounds |
428 | AFNOR NF EN 50363-0-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low-voltage energy cables - Part 0 : general introduction |
429 | AFNOR NF EN 14976-2006 | 2006-03-01 | French | Textiles - Mattress ticking - Specifications and test methods |
430 | AFNOR NF EN 1996-1-1-2006 | 2006-03-01 | French | Eurocode 6 - Design of masonry structures - Part 1-1 : general rules for reinforced and unreinforced masonry structures |
431 | AFNOR NF ISO 11269-2-2006 | 2006-03-01 | French | Soil quality - Determination of the effects of pollutants on soil flora - Part 2 : effects of chemicals on the emergence and growth of higher plants |
432 | AFNOR NF EN 1080/A2-2006 | 2006-03-01 | French | Impact protection helmets for young children |
433 | AFNOR NF EN 1078/A1-2006 | 2006-03-01 | French | Helmets for pedal cyclists and for users of skateboards and roller skates |
434 | AFNOR NF X30-413-2006 | 2006-03-01 | French | Waste - Constitution of a sample of household waste contained in a waste collection vehicle |
435 | AFNOR NF EN 61988-3-1-2006 | 2006-03-01 | French | Plasma display panels - Part 3-1 : mechanical interface |
436 | AFNOR NF EN 1067-2006 | 2006-03-01 | French | Adhesives - Examination and preparation of samples for testing |
437 | AFNOR NF EN 50363-7-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 7 : halogen-free, thermoplastic insulating compounds |
438 | AFNOR NF EN 71-10-2006 | 2006-03-01 | French | Safety of toys - Part 10 : organic chemical compounds - Sample preparation and extraction |
439 | AFNOR NF EN 50363-8-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low-voltage energy cable - Part 8 : halogen-free, thermoplastic sheathing compounds |
440 | AFNOR NF EN 54-11/A1-2006 | 2006-03-01 | French | Fire detection and alarm systems - Part 11 : manual call points |
441 | AFNOR NF EN 4459-2006 | 2006-03-01 | French | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard |
442 | AFNOR NF EN 352-4/A1-2006 | 2006-03-01 | French | Hearing protectors - Safety requirements and testing - Part 4 : level-dependent ear-muffs |
443 | AFNOR NF EN 4460-2006 | 2006-03-01 | French | Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure |
444 | AFNOR NF EN 140401-801/A1-2006 | 2006-03-01 | French | Detail Specification : fixed low power non wire-wound surface mount (SMD) resistors - Rectangular - Stability classes 0,1, 0,25, 0,5, 1 |
445 | AFNOR NF EN 61977-2006 | 2006-03-01 | French | Fibre optic filters - Generic specification |
446 | AFNOR NF EN 2243-5-2006 | 2006-03-01 | French | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5 : ageing tests |
447 | AFNOR NF EN 62258-2-2006 | 2006-03-01 | French | Semiconductor die products - Part 2 : exchange data formats |
448 | AFNOR NF EN 14866-2006 | 2006-03-01 | French | Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications |
449 | AFNOR NF EN 2243-6-2006 | 2006-03-01 | French | Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6 : determination of shear stress and shear strain |
450 | AFNOR NF EN ISO 11073-30300-2006 | 2006-03-01 | French | Health informatics - Point-of-care medical device communication - Part 30300 : transport profile - Infrared wireless |
451 | AFNOR NF EN 60118-8-2006 | 2006-03-01 | French | Electroacoustics - Hearing aids - Part 8 : methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions |
452 | AFNOR NF EN 60118-7-2006 | 2006-03-01 | French | Electroacoustics - Hearing aids - Part 7 : measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes |
453 | AFNOR NF ISO 22188-2006 | 2006-03-01 | French | Monitoring for inadvertent movement and illicit trafficking of radioactive material |
454 | AFNOR NF EN 14863-2006 | 2006-03-01 | French | Vitreous and porcelain enamels - Determination of the edge covering on enamelled steel plate to be used in heat exchangers |
455 | AFNOR NF ISO 10825-2006 | 2006-03-01 | French | Gears - Wear and damage to gear teeth - Terminology |
456 | AFNOR NF ISO 8956-2006 | 2006-03-01 | French | Acceptance conditions for copying attachments, integral or otherwise, for lathes - Testing of the accuracy |
457 | AFNOR NF EN 2267-008-2006 | 2006-03-01 | French | Aerospace series - Cables, electrical, for general purposes - Operating temperatures between - 55 掳C and 260 掳C - Part 008 : DM family, single UV laser printable and multicore assembly - Product standard |
458 | AFNOR NF EN 2266-005-2006 | 2006-03-01 | French | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 掳C and 200 掳C - Part 005 : UV laser printable - Product standard |
459 | AFNOR NF EN 14854-2006 | 2006-03-01 | French | Aerosol containers - Glass containers - Dimensions of the neck finish |
460 | AFNOR NF EN 4434-2006 | 2006-03-01 | French | Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances |
461 | AFNOR NF EN 4616-2006 | 2006-03-01 | French | Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting |
462 | AFNOR NF EN 827-2006 | 2006-03-01 | French | Adhesives - Determination of conventional solids content and constant mass solids content |
463 | AFNOR NF EN 2266-007-2006 | 2006-03-01 | French | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 掳C and 200 掳C - Part 007 : UV laser printable multicore jacketed cable - Product standard |
464 | AFNOR NF EN 60779-2006 | 2006-03-01 | French | Industrial electroheat equipment - Test methods for electroslag remelting furnaces |
465 | AFNOR NF EN 14850-2006 | 2006-03-01 | French | Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height |
466 | AFNOR NF EN 14683-2006 | 2006-03-01 | French | Surgical masks - Requirements and test methods |
467 | AFNOR NF EN 81-1/A1-2006 | 2006-03-01 | French | Safety rules for the construction and installation of lifts - Part 1 : electric lifts |
468 | AFNOR NF EN 2267-009-2006 | 2006-03-01 | French | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 掳C and 260 掳C - Part 009 : DRA family, single and multicore assembly - Product standard |
469 | AFNOR NF E25-017-2006 | 2006-03-01 | French | Fasteners - Counterbores for bolts and screws - Dimensions |
470 | AFNOR NF EN 50363-3-2006 | 2006-03-01 | French | Insulating, sheathing and covering materials for low voltage energy cables - Part 3 : PVC insulating compounds |
471 | AFNOR NF EN 62301-2006 | 2006-03-01 | French | Household electrical appliances - Measurement of standby power |
472 | AFNOR NF EN 302-3/A1-2006 | 2006-03-01 | French | Adhesives for load-bearing timber structures - Test methods - Part 3 : determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
473 | AFNOR NF EN 60534-8-4-2006 | 2006-03-01 | French | Industrial-process control valves - Part 8-4 : noise considerations - Prediction of noise generated by hydrodynamic flow |
474 | AFNOR NF ISO 11074-2006 | 2006-03-01 | French | Soil quality - Vocabulary |
475 | AFNOR NF EN 3475-408-2006 | 2006-03-01 | French | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 408 : fire resistance |
476 | AFNOR NF EN ISO 4545-4-2006 | 2006-03-01 | French | Metallic materials - Knoop hardness test - Part 4 : tables of hardness values |
477 | AFNOR NF EN ISO 4545-1-2006 | 2006-03-01 | French | Metallic materials - Knoop hardness test - Part 1 : test method |
478 | AFNOR NF EN 12697-42-2006 | 2006-03-01 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 42 : amount of coarse foreign matters in reclaimed asphalt |
479 | AFNOR NF EN 14597-2006 | 2006-03-01 | French | Temperature control devices and temperature limiters for heat generating systems |
480 | AFNOR NF EN 4176-2006 | 2006-03-01 | French | Aerospace series - Lockbolts, 100掳 countersunk normal head or protruding head, tension- / sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating - Collars in titanium TI-P99002 or aluminium alloy 2024 - Metric series - Technical specification |
481 | AFNOR NF EN 14223-2006 | 2006-03-01 | French | Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of water absorption |
482 | AFNOR UTE C15-900-2006 | 2006-03-01 | French | Coexistence between communication and power networks - Implementation of communication networks |
483 | AFNOR NF EN ISO 13000-2-2006 | 2006-03-01 | French | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2 : preparation of test specimens and determination of properties |
484 | AFNOR NF A05-800-2006 | 2006-03-01 | French | Activities of services - Cathodic protection service - Service provider commitments |
485 | AFNOR NF EN 60068-2-30-2006 | 2006-03-01 | French | Environmental testing - Part 2-30 : tests - Test Db : damp heat, cyclic (12 h + 12 h cycle) |
486 | AFNOR NF EN 14907-2006 | 2006-03-01 | French | Ambient air quality - standard gravimetric measurement method for the determination of the PM 2,5 mass fraction of suspended particulate matter |
487 | AFNOR NF EN ISO 13000-1-2006 | 2006-03-01 | French | Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1 : requirements and designation |
488 | AFNOR NF EN 203-2-9-2006 | 2006-03-01 | French | Gas heated catering equipment - Part 2-9 : specific requirements - Solid tops, warming plates and griddles |
489 | AFNOR NF EN 12259-3/A2-2006 | 2006-03-01 | French | Fixed firefighting systems - Components for sprinkler and water spray systems - Part 3 : dry alarm valve assemblies |
490 | AFNOR NF EN 60661/A2-2006 | 2006-03-01 | French | Methods for measuring the performance of electric household coffee makers |
491 | AFNOR NF EN 203-2-8-2006 | 2006-03-01 | French | Gas heated catering equipment - Part 2-8 : specific requirements - Brat pans and pa毛lla cookers |
492 | AFNOR NF EN 60317-40/A2-2006 | 2006-03-01 | French | Specifications for particular types of winding wires - Part 40 : glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 |
493 | AFNOR NF U66-053-2006 | 2006-03-01 | French | Equipment for slaughterhouses - Slaughtering pens - Safety and hygiene requirements |
494 | AFNOR NF EN 203-2-6-2006 | 2006-03-01 | French | Gas heated catering equipment - Part 2-6 : specific requirements - Hot water heaters for beverage |
495 | AFNOR NF EN 203-2-4-2006 | 2006-03-01 | French | Gas heated catering equipment - Part 2-4 : specific requirements - Fryers |
496 | AFNOR NF EN 60317-39/A2-2006 | 2006-03-01 | French | Specifications for particular types of winding wires - Part 39 : glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 |
497 | AFNOR NF V01-001-2006 | 2006-03-01 | French | Hygiene of foodstuffs and of animal feedingstuffs - Methodology for the drawning up of good hygiene practice guides and of guides for application of the HACCP principles |
498 | AFNOR FD CEN/TR 15128-2006 | 2006-03-01 | French | Survey of European Standards for rehabilitation of drain and sewer systems |
499 | AFNOR FD CEN/TR 15134-2006 | 2006-03-01 | French | Non-destructive testing - Automated ultrasonic examination - Selection and application of systems |
500 | AFNOR NF EN ISO 6508-2-2006 | 2006-03-01 | French | Metallic materials - Rockwell hardness test - Part 2 : verification and calibration of testing machines (scales A, B, C, D, E, F, G, H, K, N, T) |
|