Pos | standard Number | publication date | Language | Description |
1 | AFNOR NF EN 60352-2-2006 | 2006-08-01 | French | Solderless connections - Part 2 : crimped connections - General requirements, test methods and practical guidance |
2 | AFNOR NF EN 725-4-2006 | 2006-08-01 | French | Advanced technical ceramics - Methods of test for ceramic powders - Part 4 : determination of oxygen content in aluminium nitride by XRF analysis |
3 | AFNOR NF EN 60282-1-2006 | 2006-08-01 | French | High-voltage fuses - Part 1 : current-limiting fuses |
4 | AFNOR NF EN 60297-3-104-2006 | 2006-08-01 | French | Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104 : connector dependent interface dimensions of subracks and plug-in units |
5 | AFNOR NF EN 60335-2-17/A1-2006 | 2006-08-01 | French | Household and similar electrical appliances - Safety - Part 2-17 : particular requirements for blankets, pads and similar flexible heating appliances |
6 | AFNOR NF EN 60216-4-1-2006 | 2006-08-01 | French | Electrical insulating materials - Thermal endurance properties - Part 4-1 : ageing ovens - Single-chamber ovens |
7 | AFNOR NF EN 50414-2006 | 2006-08-01 | French | Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables - Method A : total lead content determination with flame excitation atomic absorption spectrometry - Method B : qualitative analysis of lead by lead sulphide staining |
8 | AFNOR NF EN 14246-2006 | 2006-08-01 | French | Gypsum elements for suspended ceilings - Definitions, requirements and test methods |
9 | AFNOR NF C15-211-2006 | 2006-08-01 | French | Low-voltage electrical installations - Installations in medically used rooms - Modified by NF C15-211 F1:201006 (C15-211F1) |
10 | AFNOR NF EN 2680-2006 | 2006-08-01 | French | Aerospace series - Nuts, anchor, self-locking, floating, self-aligning two lug, in alloy steel, cadmium plated, MoS2 lubricated - Classification : 900 MPa (at ambient temperature) / 235 掳C |
11 | AFNOR NF EN 50411-2-4-2006 | 2006-08-01 | French | Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-4 : sealed dome fibre splice closures Type 1, for category S & A |
12 | AFNOR NF EN 14785-2006 | 2006-08-01 | French | Residential space heating appliances fired by wood pellets - Requirements and test methods |
13 | AFNOR NF EN 14803-2006 | 2006-08-01 | French | Identification and/or determination of the quantity of waste |
14 | AFNOR NF EN 14931-2006 | 2006-08-01 | French | Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing |
15 | AFNOR NF EN 12352-2006 | 2006-08-01 | French | Traffic control equipment - Warning and safety light devices |
16 | AFNOR NF E52-140-2006 | 2006-08-01 | French | Forged shackles for general lifting purposes - Dee shackles and bow shackles - Grades 4 and 8 |
17 | AFNOR NF EN 15038-2006 | 2006-08-01 | French | Translation services - Service requirements |
18 | AFNOR NF EN 15041-2006 | 2006-08-01 | French | Chemicals used for treatment of water intended for human consumption - Antiscalants for membranes - Polyphosphates |
19 | AFNOR NF E52-142-2006 | 2006-08-01 | French | Forged shackles for general lifting purposes - Screwded dee shackles and screwed bow shackles - Grades 3 |
20 | AFNOR NF EN ISO 19901-1-2006 | 2006-08-01 | French | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 1 : metocean design and operating considerations |
21 | AFNOR NF ISO 3800-2006 | 2006-08-01 | French | Threaded fasteners - Axial load fatigue testing - Test methods and evaluation of results |
22 | AFNOR NF EN ISO 7493-2006 | 2006-08-01 | French | Dentistry - Operator's stool |
23 | AFNOR NF EN 623-1-2006 | 2006-08-01 | French | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1 : determination of the presence of defects by dye penetration |
24 | AFNOR NF EN 646-2006 | 2006-08-01 | French | Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board |
25 | AFNOR NF ISO 8133-2006 | 2006-08-01 | French | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessories |
26 | AFNOR NF ISO 7476-2006 | 2006-08-01 | French | Nuclear fuel technology - Determination of uranium in uranyl nitrate solutions of nuclear grade quality - Gravimetric method |
27 | AFNOR XP S61-550-2006 | 2006-08-01 | French | Firefighting equipment - Mobile hydraulic platforms (MHP) - MHP of type B and group 1 according to NF EN 1777:2005 |
28 | AFNOR NF ISO 22892-2006 | 2006-08-01 | French | Soil quality - Guideline for the identification of target compounds by gas chromatography and mass spectrometry |
29 | AFNOR NF EN ISO 16000-9-2006 | 2006-08-01 | French | Indoor air - Part 9 : determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method |
30 | AFNOR NF EN ISO 16000-10-2006 | 2006-08-01 | French | Indoor air - Part 10 : determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method |
31 | AFNOR NF EN ISO 16000-11-2006 | 2006-08-01 | French | Indoor air - Part 11 : determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens |
32 | AFNOR NF ISO 19701-2006 | 2006-08-01 | French | Methods for sampling and analysis of fire effluents |
33 | AFNOR NF EN ISO 8665-2006 | 2006-08-01 | French | Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations |
34 | AFNOR NF EN ISO 16148-2006 | 2006-08-01 | French | Gas cylinders - Refillable seamless steel gas cylinders - Acoustic emission testing (AT) for periodic inspection |
35 | AFNOR NF EN ISO 16284-2006 | 2006-08-01 | French | Ophthalmic optics - Information interchange for ophthalmic optical equipment |
36 | AFNOR NF EN ISO 13697-2006 | 2006-08-01 | French | Optics and phonotics - Lasers and laser-related equipment - Test methods for specular reflectance and transmittance of optical laser components |
37 | AFNOR NF EN ISO 15011-4-2006 | 2006-08-01 | French | Health and safety in welding and allied processes - Laboratory method for sampling fume and gases generated by arc welding - Part 4 : fume data sheets - Modified by NF EN ISO 15011-4/A1:200903 (A88-200-4/A1) |
38 | AFNOR NF EN ISO 9988-1-2006 | 2006-08-01 | French | Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1 : designation system and basis for specifications |
39 | AFNOR NF EN ISO 14880-3-2006 | 2006-08-01 | French | Optics and photonics - Microlens arrays - Part 3 : test methods for optical properties other than wavefront aberrations |
40 | AFNOR NF EN ISO 14910-1-2006 | 2006-08-01 | French | Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1 : designation system and basis for specifications |
41 | AFNOR NF EN ISO 14910-2-2006 | 2006-08-01 | French | Plastics -Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2 : preparation of test specimens and determination of properties |
42 | AFNOR NF EN 10219-1-2006 | 2006-08-01 | French | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1 : technical delivery requirements |
43 | AFNOR NF EN 60738-1-2006 | 2006-08-01 | French | Thermistors - Directly heated positive temperature coefficient - Part 1 : generic specification |
44 | AFNOR NF EN ISO 17634-2006 | 2006-08-01 | French | Welding consumables - Tubular cored electrodes for gas shielded metal arc welding of creep-resisting steels - Classification |
45 | AFNOR NF EN 54-7/A2-2006 | 2006-08-01 | French | Fire detection and fire alarm systems - Part 7 : smoke detectors - Point detectors using scattered light, transmitted light or ionization |
46 | AFNOR NF EN 960-2006 | 2006-08-01 | French | Headforms for use in the testing of protective helmets |
47 | AFNOR NF EN 14837-2006 | 2006-08-01 | French | Surfaces for sports areas - Determination of slip resistance |
48 | AFNOR NF EN 14817-2006 | 2006-08-01 | French | Railway applications - Suspension components - Air spring control elements |
49 | AFNOR NF EN 60812-2006 | 2006-08-01 | French | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
50 | AFNOR NF EN 60794-3-21-2006 | 2006-08-01 | French | Optical fibre Cables - Part 3-21 : outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling |
51 | AFNOR NF EN 60794-3-12-2006 | 2006-08-01 | French | Optical fibre Cables - Part 3-12 : outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
52 | AFNOR NF EN 14535-1-2006 | 2006-08-01 | French | Railway applications - Brake discs for railway rolling stock - Part 1 : brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements |
53 | AFNOR NF EN 2549-2006 | 2006-08-01 | French | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1100 MPa (at ambient temperature)/315掳C |
54 | AFNOR NF EN 60770-3-2006 | 2006-08-01 | French | Transmitters for use in industrial-process control systems - Part 3 : methods for performance evaluation of intelligent transmitters |
55 | AFNOR NF EN 302018-2-2006 | 2006-08-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service - Part 2 : harmonized EN under article 3.2 of the R&TTE Directive (V1.2.1) |
56 | AFNOR NF EN 302018-1-2006 | 2006-08-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service - Part 1 : technical characteristics and test methods (V1.2.1) |
57 | AFNOR NF EN 14488-6-2006 | 2006-08-01 | French | Testing sprayed concrete - Part 6 : thickness of concrete on a substrate |
58 | AFNOR NF EN 62282-3-2-2006 | 2006-08-01 | French | Fuel cell technologies - Part 3-2 : stationary fuel cell power plants - Performance test methods |
59 | AFNOR NF EN 13848-2-2006 | 2006-08-01 | French | Railway applications - Track - Track geometry quality - Part 2 : measuring systems - Track recording vehicles |
60 | AFNOR NF EN 61970-1-2006 | 2006-08-01 | French | Energy Management system application program interface (EMS-API) - Part 1 : guidelines and general requirements |
61 | AFNOR NF EN 61970-501-2006 | 2006-08-01 | French | Energy management system application program interface (EMS-API) - Part 501 : common Information Model Resource Description Framework (CIM RDF) schema |
62 | AFNOR NF EN 61996-2-2006 | 2006-08-01 | French | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2 : simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results |
63 | AFNOR NF EN ISO 10308-2006 | 2006-08-01 | French | Metallic coatings - Review of porosity tests |
64 | AFNOR NF ISO 433/A1-2006 | 2006-08-01 | French | Conveyor belts - Marking - Amendment 1 |
65 | AFNOR NF EN 13523-26-2006 | 2006-08-01 | French | Coil coated metals - Test methods - Part 26 : resistance to condensation of water |
66 | AFNOR NF EN 13523-25-2006 | 2006-08-01 | French | Coil coated metals - Test methods - Part 25 : resistance to humidity |
67 | AFNOR NF EN 61591/A1-2006 | 2006-08-01 | French | Household range hoods - Methods for measuring performance |
68 | AFNOR NF EN 9102-2006 | 2006-08-01 | French | Aerospace series - Quality systems - First article inspection |
69 | AFNOR NF EN 9104-2006 | 2006-08-01 | French | Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs |
70 | AFNOR NF EN 9132-2006 | 2006-08-01 | French | Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking |
71 | AFNOR NF EN 60335-2-90-2006 | 2006-08-01 | French | Household and similar electrical appliances - Safety - Part 2-90 : particular requirements for commercial microwave ovens |
72 | AFNOR FD P99-503-2006 | 2006-08-01 | French | Interoperability of central computer ticketing systems (Interoperability of Back-Office computer ticketing), INTERBOB |
73 | AFNOR NF EN 13231-2-2006 | 2006-08-01 | French | Railway applications - Track - Acceptance of works - Part 2 : works on ballasted track - Switches and crossings |
74 | AFNOR NF EN 13231-1-2006 | 2006-08-01 | French | Railway applications - Track - Acceptance of works - Part 1 : works on ballasted tracks - Plain line |
75 | AFNOR XP ISO/TS 19036-2006 | 2006-08-01 | French | Microbiology of food and animal feeding stuffs - Guidelines for the estimation measurement uncertainty for quantitative determinations - Modified by XP ISO/TS 19036/A1:200902 (V08-205/A1) |
76 | AFNOR XP CEN/TS 15354-2006 | 2006-08-01 | French | Plastics - Extruded and/or calandered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation |
77 | AFNOR FD CEN/TR 15350-2006 | 2006-08-01 | French | Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery |
78 | AFNOR NF EN 60556-2006 | 2006-08-01 | French | Gyromagnetic materials intended for application at microwave frequencies - Measuring methods for properties |
79 | AFNOR NF EN 131802-2006 | 2006-08-01 | French | Blank Detail Specification : fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level EZ |
80 | AFNOR AC X50-828-2006 | 2006-08-01 | French | Yachtbroker - Deontology, service commitments and qualifications |
81 | AFNOR AC X50-111-2006 | 2006-08-01 | French | CRM data quality measurement - Reference document for CRM indicators |
82 | AFNOR NF EN 60598-2-12-2006 | 2006-08-01 | French | Luminaires - Part 2-12 : particular requirements - Mains socket-outlet mounted nightlights |
83 | AFNOR NF EN 60601-1-2/A1-2006 | 2006-08-01 | French | Medical electrical equipment - Part 1-2 : general requirements for safety - Collateral standard : electromagn茅tic compatibility - Requirements and tests |
84 | AFNOR UTE C71-804-2006 | 2006-08-01 | French | Self contained emergency escape lightings for sleeping premises open to the public which have no stand-by lighting |
85 | AFNOR NF T90-421-2006 | 2006-08-01 | French | Water quality - Bacteriological examinations of swimming pool water |
86 | AFNOR NF ISO 6962-2006 | 2006-08-01 | French | Nuclear energy - Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste |
87 | AFNOR NF ISO 7152-2006 | 2006-08-01 | French | Camping tents and caravan awnings - Vocabulary and list of equivalent terms |
88 | AFNOR NF P31-202-1/A2-2006 | 2006-08-01 | French | DTU 40.21 - Building works - Roof covering made of slipping or grooved clay tiles - Part 1 : technical specifications |
89 | AFNOR NF EN 14996-2006 | 2006-08-01 | French | Water quality - Guidance on assuring the quality of biological and ecological assessments in the aquatic environment |
90 | AFNOR NF EN 14978-2006 | 2006-08-01 | French | Laminate floor coverings - Elements with acrylic based surface layer, eletron beam cured - Specifications, requirements and test methods |
91 | AFNOR NF EN 50367-2006 | 2006-08-01 | French | Railway applications - Current collection systems - Technical criteria for the interaction between pantograph and overhead line (to achieve free access) |
92 | AFNOR NF EN 1256-2006 | 2006-08-01 | French | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
93 | AFNOR NF EN 301-2006 | 2006-08-01 | French | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
94 | AFNOR NF ISO 13399-1-2006 | 2006-08-01 | French | Cutting tool data representation and exchange - Part 1: overview, fundamental principles and general information model |
95 | AFNOR NF EN 4035-2006 | 2006-08-01 | French | Aerospace series - Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads |
96 | AFNOR NF EN 1983-2006 | 2006-08-01 | French | Industrial valves - Steel ball valves |
97 | AFNOR FD CEN/TR 14788-2006 | 2006-08-01 | French | Ventilation of buildings - Design and dimensioning of residential ventilation systems |
98 | AFNOR NF EN 1151-1-2006 | 2006-08-01 | French | Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 1 : Non-automatic pumps, requirements, testing, marking |
99 | AFNOR NF EN 4040-2006 | 2006-08-01 | French | Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubrificating liner with wide inner ring - Elevated loads at ambiant temperature - Dimensions and loads |
100 | AFNOR NF EN 12710-2006 | 2006-08-01 | French | Fibreboard drums - Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l |
101 | AFNOR FD ISO/TR 10064-5-2006 | 2006-08-01 | French | Cylindrical gears - Code of inspection practice - Part 5 : recommendations relative to evaluation of gear measuring instruments |
102 | AFNOR NF EN 50200-2006 | 2006-08-01 | French | Method of test for resistance to fire of unprotected small cables for use in emergency circuits |
103 | AFNOR NF EN 14894-2006 | 2006-08-01 | French | LPG equipment and accessories - Cylinder and drum marking |
104 | AFNOR FD ISO/TR 15462-2006 | 2006-08-01 | French | Water quality - Selection of tests for biodegradability |
105 | AFNOR NF EN 61400-11/A1-2006 | 2006-08-01 | French | Wind turbine generator systems - Part 11 : acoustic noise measurement techniques |
106 | AFNOR NF EN 62141-2006 | 2006-08-01 | French | Helical-scan digital video cassette recording format using 12,65 mm magnetic tape and incorporating MPEG-4 compression - Type D-16 Format |
107 | AFNOR NF EN 62391-2-1-2006 | 2006-08-01 | French | Fixed electric double-layer capacitors for use in electronic equipment - Part 2-1 : blank detail specification - Electric double layer capacitors for power application - Assessment level EZ |
108 | AFNOR NF EN 61212-1-2006 | 2006-08-01 | French | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 1 : definitions, designations and general requirements |
109 | AFNOR NF EN 61000-3-2-2006 | 2006-08-01 | French | Electromagnetic compatibility (EMC) - Part 3-2 : limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) - Modified by NF EN 61000-3-2/A1:200911 (C91-003-2/A1),NF EN 61000-3-2/A2:200911 (C91-003-2/A2) |
110 | AFNOR NF EN 15031-2006 | 2006-08-01 | French | Chemicals used for treatment of swimming pool water - Aluminium based coagulants |
111 | AFNOR NF EN ISO 19116-2006 | 2006-08-01 | French | Geographic information - Positioning services |
112 | AFNOR NF EN 61966-6-2006 | 2006-08-01 | French | Multimedia systems and equipment - Colour measurement and management - Part 6 : front projection displays |
113 | AFNOR NF EN 2754-2006 | 2006-08-01 | French | Aerospace series - Nuts, anchor, self locking, two lug, floating with counterbore - Classification 1100 MPa/235掳C |
114 | AFNOR NF EN 61212-3-1-2006 | 2006-08-01 | French | Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3 : specifications for individual materials - Sheet 1 : round laminated rolled tubes |
115 | AFNOR FD X60-212-2006 | 2006-08-01 | French | Maintenance - Handbook of instructions maintenance - Definitions and general principles for the wording and layout |
116 | AFNOR NF EN 60064/A3-2006 | 2006-08-01 | French | Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements |
117 | AFNOR NF B54-162-2006 | 2006-08-01 | French | Veneer plywood - Framework plywood - Requirements |
118 | AFNOR NF EN 62391-2-2006 | 2006-08-01 | French | Fixed electric double-layer capacitors for use in electronic equipment - Part 2 : sectional specification - electric double-layer capacitors for power application |
119 | AFNOR NF EN 2881-2006 | 2006-08-01 | French | Aerospace series - Nuts, anchor, self-locking, fuel resistant, sealing, floating, two lug, with counterbore, in corrosion resisting steel, passivated, MoS2 lubricated - Classification : 900 MPa (at ambient temperature) / 120掳C |
120 | AFNOR NF EN ISO 18472-2006 | 2006-08-01 | French | Sterilization of health care products - Biological and chemical indicators - Test equipment |
121 | AFNOR NF EN ISO 16862-2006 | 2006-08-01 | French | Paints and varnishes - Evaluation of sag resistance |
122 | AFNOR NF EN 60464-3-2/A1-2006 | 2006-08-01 | French | Varnishes used for electrical insulation - Part 3 : specifications for individual materials - Sheet 2 : hot curing impregnating varnishes |
123 | AFNOR NF EN 60512-1-100-2006 | 2006-08-01 | French | Connectors for electronic equipment - Tests and measurements - Part 1-100 : general - Applicable publications |
124 | AFNOR NF EN 60512-12-1-2006 | 2006-08-01 | French | Connectors for electronic equipment - Tests and measurements - Part 12-1 : soldering tests - Test 12a : solderability, wetting, solder bath method |
125 | AFNOR NF DTU 61.1 P1/A1-2006 | 2006-08-01 | French | Building work - Gas installation in domestic premises - Part 1 : terminology |
126 | AFNOR NF EN ISO 8257-2-2006 | 2006-08-01 | French | Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties |
127 | AFNOR NF EN ISO 8257-1-2006 | 2006-08-01 | French | Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1 : designation system and basis for specifications |
128 | AFNOR NF DTU 61.1 P2/A1-2006 | 2006-08-01 | French | Building work - Gas installation in domestic premises - Part 2 : technical specifications - General dispositions |
129 | AFNOR NF EN 61925-2006 | 2006-08-01 | French | Multimedia systems and equipment - Multimedia home server systems - Vocabulary of home server |
130 | AFNOR NF EN 14432-2006 | 2006-08-01 | French | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Product discharge and air inlet valves |
131 | AFNOR NF EN 62197-1-2006 | 2006-08-01 | French | Connectors for electronic equipment - Quality assessment requirements - Part 1 : generic specification |
132 | AFNOR NF EN 62389-2006 | 2006-08-01 | French | Methods of measurement for DVD players |
133 | AFNOR NF DTU 61.1 P3-2006 | 2006-08-01 | French | Building work - Gas installation in domestic permises - Part 3 : technical specifications - Particular dispositions except the combustion products evacuation - Modified by NF DTU 61.1 P3/A1:201006 (P45-204-3/A1) |
134 | AFNOR NF EN 60921/A1-2006 | 2006-08-01 | French | Ballasts for tubular fluorescent lamps - Performance requirements |
135 | AFNOR NF EN ISO 5172-2006 | 2006-08-01 | French | Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests |
136 | AFNOR NF EN 60335-2-73/A1-2006 | 2006-08-01 | French | Household and similar electrical appliances - Safety - Part 2-73 : particular requirements for fixed immersion heaters |
137 | AFNOR NF EN 14701-3-2006 | 2006-08-01 | French | Characterization of sludges - Filtration properties - Part 3 : determination of compressibility |
138 | AFNOR NF EN ISO 14323-2006 | 2006-08-01 | French | Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross tension testing |
139 | AFNOR NF EN 14701-2-2006 | 2006-08-01 | French | Characterization of sludges - Filtration properties - Part 2 : determination of the specific resistance to filtration |
140 | AFNOR NF EN 12300/A1-2006 | 2006-08-01 | French | Cryogenic vessels - Cleanliness for cryogenic service |
141 | AFNOR NF EN 61924-2006 | 2006-08-01 | French | Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Operational and performance requirements, methods of testing and required test results |
142 | AFNOR NF EN 60512-14-2-2006 | 2006-08-01 | French | Connectors for electronic equipment - Tests and measurements - Part 14-2 : sealing tests - Test 14b : sealing - Fine air leakage |
143 | AFNOR NF EN 60071-1-2006 | 2006-08-01 | French | Insulation co-ordination - Part 1 : definitions, principles and rules - Modified by NF EN 60071-1/A1:201007 (C10-100/A1) |
144 | AFNOR NF EN 927-2-2006 | 2006-08-01 | French | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2 : performance specification |
145 | AFNOR NF ISO 17470-2006 | 2006-08-01 | French | Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry |
146 | AFNOR NF ISO 1304-2006 | 2006-08-01 | French | Rubber compounding ingredients - Carbon black - Determination of iodine absorption number |
147 | AFNOR NF EN ISO 4589-2/A1-2006 | 2006-08-01 | French | Plastics - Determination of burning behaviour by oxygen index - Part 2 : ambient-temperature test |
148 | AFNOR NF EN 1854-2006 | 2006-08-01 | French | Pressure sensing devices for gas burners and gas burning appliances |
149 | AFNOR NF ISO 18287-2006 | 2006-08-01 | French | Soil quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Gas chromatographic method with mass spectrometric detection (CG-MS) |
150 | AFNOR NF EN 60512-14-4-2006 | 2006-08-01 | French | Connectors for electronic equipment - Tests and measurements - Part 14-4 : sealing tests - Test 14d : immersion - Waterproof |
151 | AFNOR NF DTU 61.1 P4-2006 | 2006-08-01 | French | Building work - Gas installation in domestic permises - Part 4 : technical specifications - Particular dispositions to the combustion products evacuation - Modified by NF DTU 61.1 P4/A1:201006 (P45-204-4/A1) |
152 | AFNOR NF ISO 3475-2006 | 2006-08-01 | French | Oil of aniseed (Pimpinella anisum L.) |
153 | AFNOR NF EN 60335-2-54/A11-2006 | 2006-08-01 | French | Household and similar electrical appliances - Safety - Part 2-54 : particular requirements for surface-cleaning appliances for household use employing liquids or steam |
154 | AFNOR NF DTU 61.1 P5-2006 | 2006-08-01 | French | Building work - Gas installation in domestic premises - Part 5 : general installations - Modified by NF DTU 61.1 P5/A1:201006 (P45-204-5/A1) |
155 | AFNOR NF EN 60512-14-5-2006 | 2006-08-01 | French | Connectors for electronic equipment - Tests and measurements - Part 14-5 : sealing tests - Test 14e : immersion at low air pressure |
156 | AFNOR NF EN 60512-14-6-2006 | 2006-08-01 | French | Connectors for electronic equipment - Tests and measurements - Part 14-6 : sealing tests - Test 14f : interfacial sealing |
157 | AFNOR NF EN 60335-2-59/A1-2006 | 2006-08-01 | French | Household and similar electrical appliances - Safety - Part 2-59 : particular requirements for insect killers |
158 | AFNOR NF ISO 18116-2006 | 2006-08-01 | French | Surface chemical analysis - Guidelines for preparation and mounting of specimens for analysis |
159 | AFNOR NF M60-812-2-2006 | 2006-08-01 | French | Nuclear energy - Measurement of environmental radioactivity - Part 2 : measurement of carbon 14 activity by liquid scintillation in carbon matrices in the environment |
160 | AFNOR NF DTU 61.1 P6-2006 | 2006-08-01 | French | Building work - Gas installations in domestic premises - Part 6 : contract bill of special clauses |
161 | AFNOR NF EN 62391-1-2006 | 2006-08-01 | French | Fixed electric double-layer capacitors for use in electronic equipment - Part 1 : generic specification |
162 | AFNOR NF X60-012-2006 | 2006-08-01 | French | Maintenance - Vocabulary of components of items and their supply |
163 | AFNOR NF EN ISO 9173-1-2006 | 2006-08-01 | French | Dentistry - Extraction forceps - Part 1 : general requirements and test methods |
164 | AFNOR NF EN 61347-2-2/A2-2006 | 2006-08-01 | French | Lamp controlgear - Part 2-2 : particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
165 | AFNOR NF EN 14175-6-2006 | 2006-08-01 | French | Fume cupboards - Part 6 : variable air volume fume cupboards |
166 | AFNOR NF EN 10269/A1-2006 | 2006-08-01 | French | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
167 | AFNOR NF EN ISO 19125-1-2006 | 2006-07-01 | French | Geographic information - Simple feature access - Part 1 : common architecture |
168 | AFNOR NF EN 62403-2006 | 2006-07-01 | French | High Density Recording Format on CD-R/RW disc system - HD-BURN format |
169 | AFNOR NF S27-100-2006 | 2006-07-01 | French | Cinematography - Electronic projection rooms of digital cinema type |
170 | AFNOR NF R14-336-2006 | 2006-07-01 | French | Road vehicles - Retro-reflective registration plates for motor vehicle and trailers - Specifications |
171 | AFNOR NF ISO 4731-2006 | 2006-07-01 | French | Oil of geranium (Pelargonium X ssp.) |
172 | AFNOR NF ISO 4832-2006 | 2006-07-01 | French | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coliforms - Colony count technique |
173 | AFNOR XP CEN/TS 14383-4-2006 | 2006-07-01 | French | Prevention of crime - Urban planning and design - Part 4 : shops and offices |
174 | AFNOR NF ISO 3089-2006 | 2006-07-01 | French | Machine tools - Test conditions for self-centring, manually-operated chucks with one piece-jaws |
175 | AFNOR XP T90-250-2006 | 2006-07-01 | French | Water quality - Determination of selected organo-tin compounds in sediments - Gas chromatography method |
176 | AFNOR NF ISO 18232-2006 | 2006-07-01 | French | Health informatics - Messages and communication - Format of length limited globally unique string identifiers |
177 | AFNOR NF ISO 20553-2006 | 2006-07-01 | French | Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material |
178 | AFNOR NF ISO 20785-1-2006 | 2006-07-01 | French | Dosemetry for exposures to cosmic radiation in civilian aircraft - Part 1 : conceptual basis for measurements |
179 | AFNOR NF ISO 21006-2006 | 2006-07-01 | French | Internal combustion engines - Engine weight (mass) declaration |
180 | AFNOR NF ISO 21128-2006 | 2006-07-01 | French | Cork stoppers - Determination of oxidizing residues - Iodometric titration method |
181 | AFNOR NF EN ISO/CEI 15426-2-2006 | 2006-07-01 | French | Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification - Part 2 : Two-dimensional symbols |
182 | AFNOR NF EN ISO 21871-2006 | 2006-07-01 | French | Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of low numbers of presumptive Bacillus cereus - Most probable number technique and detection method |
183 | AFNOR NF ISO 16028/A1-2006 | 2006-07-01 | French | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications |
184 | AFNOR NF EN ISO 19125-2-2006 | 2006-07-01 | French | Geographic information - Simple feature access - Part 2 : SQL option |
185 | AFNOR NF EN 13141-8-2006 | 2006-07-01 | French | Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8 : Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventialtion systems intended for a single room |
186 | AFNOR NF EN 14185-2-2006 | 2006-07-01 | French | Non fatty foods - Determination of N-methylcarbamate residues - Part 2 : HPLC method with clean-up on a diatomaceous earth column |
187 | AFNOR NF EN 14187-9-2006 | 2006-07-01 | French | Cold applied joint sealants - Test methods - Part 9 : function testing of joint sealants |
188 | AFNOR NF EN 14433-2006 | 2006-07-01 | French | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Foot valves |
189 | AFNOR NF EN 14488-3-2006 | 2006-07-01 | French | Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens |
190 | AFNOR NF EN 14701-1-2006 | 2006-07-01 | French | Characterization of sludges - Filtration properties - Part 1 : capillary suction time (CST) |
191 | AFNOR NF EN 14702-1-2006 | 2006-07-01 | French | Characterization of sludges - Settling properties - Part 1 : determination of settleability (Determination of the proportion of sludge volume and sludge volume index) |
192 | AFNOR NF EN 14702-2-2006 | 2006-07-01 | French | Characterisation of sludges - Settling properties - Part 2 : determination of thickenability |
193 | AFNOR NF EN 14895-2006 | 2006-07-01 | French | Bitumen and bituminous binders - Stabilisation of binder from bituminous emulsions or from cut-back and fluxed bituminous binders |
194 | AFNOR NF EN 14901-2006 | 2006-07-01 | French | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
195 | AFNOR NF EN 14909-2006 | 2006-07-01 | French | Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics |
196 | AFNOR NF EN ISO 10524-3-2006 | 2006-07-01 | French | Pressure regulators for use with medical gases - Part 3 : pressure regulators integrated with cylinder valves |
197 | AFNOR NF EN ISO 10524-2-2006 | 2006-07-01 | French | Pressure regulators for use with medical gases - Part 2 : manifold and line pressure regulators |
198 | AFNOR NF EN 60950-23-2006 | 2006-07-01 | French | Information technology equipment - Safety - Part 23 : large data storage equipment |
199 | AFNOR NF EN 1151-2-2006 | 2006-07-01 | French | Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2 : noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise |
200 | AFNOR NF EN 1948-3-2006 | 2006-07-01 | French | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3 : identification and quantification of PCDDs/PCDFs |
201 | AFNOR NF EN 1990/A1-2006 | 2006-07-01 | French | Eurocode - Basis for Design |
202 | AFNOR NF EN 60454-3-2-2006 | 2006-07-01 | French | Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives |
203 | AFNOR NF EN 60454-3-12-2006 | 2006-07-01 | French | Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 12 : requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesives |
204 | AFNOR NF EN 60455-3-5-2006 | 2006-07-01 | French | Resin based reactive compounds used for electrical insulation - Part 3 : specifications for individual materials - Sheet 5 : unsaturated polyester based impregnating resins |
205 | AFNOR NF ISO 17874-4-2006 | 2006-07-01 | French | Remote handling devices for radioactive materials - Part 4 : power manipulators |
206 | AFNOR NF EN 61347-2-2/A1-2006 | 2006-07-01 | French | Lamp controlgear - Part 2-2 : particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps |
207 | AFNOR NF EN 61347-2-1/A1-2006 | 2006-07-01 | French | Lamp controlgear - Part 2-1 : particular requirements for starting devices (other than glow starters) |
208 | AFNOR NF EN 4174-2006 | 2006-07-01 | French | Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series |
209 | AFNOR NF EN ISO 4892-3-2006 | 2006-07-01 | French | Plastics - Methods of exposure to laboratory light sources - Part 3 : fluorescent UV lamps |
210 | AFNOR NF EN 15140-2006 | 2006-07-01 | French | Public passenger transport - Basic requirements and recommendations for systems that measure delivered service quality |
211 | AFNOR NF E86-330-2006 | 2006-07-01 | French | Horizontal cylindrical tanks - Welded supports |
212 | AFNOR NF E86-301-2006 | 2006-07-01 | French | Vertical cylindrical tanks - Lifting pins |
213 | AFNOR NF E86-257-2006 | 2006-07-01 | French | Vertical cylindrical storage tanks - General characteristics |
214 | AFNOR NF E86-255-2006 | 2006-07-01 | French | Storage tanks - Parallelepipedic steel tanks with a capacity of 1 500 litres and more for aboveground storage of various liquids |
215 | AFNOR NF EN ISO 6877-2006 | 2006-07-01 | French | Dentistry - Root-canal obturating points |
216 | AFNOR NF EN 61280-4-4-2006 | 2006-07-01 | French | Fibre optic communication subsystem test procedures - Part 4-4 : cable plants and links - Polarization mode dispersion measurement for installed links |
217 | AFNOR NF EN ISO 4491-3-2006 | 2006-07-01 | French | Metallic powders - Determination of oxygen content by reduction methods - Part 3 : hydrogen-reducible oxygen |
218 | AFNOR NF EN 61280-2-11-2006 | 2006-07-01 | French | Fibre optic communication subsystem test procedures - Part 2-11 : digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring |
219 | AFNOR NF EN 15110-2006 | 2006-07-01 | French | Water quality - Guidance standard for the sampling of zooplankton from standing waters |
220 | AFNOR NF EN 61249-4-5-2006 | 2006-07-01 | French | Materials for printed boards and other interconnecting structures - Part 4-5 : sectional specification set for prepreg materials, unclad - Polyimide, modified or unmodified, woven E-glass prepreg of defined flammability |
221 | AFNOR NF EN 61249-4-2-2006 | 2006-07-01 | French | Materials for printed boards and other interconnecting structures - Part 4-2 : sectional specification set for prepreg materials, unclad - Multifunctional epoxide woven E-glass prepreg of defined flammability |
222 | AFNOR GA D32-309-2006 | 2006-07-01 | French | Residential solid fuel burning appliances - Interpretation guide of the rules defined by NF EN 13229, NF EN 13240 and NF EN 12815 |
223 | AFNOR FD ISO/TR 22305-2006 | 2006-07-01 | French | Cigarettes - Measurement of nicotine-free dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke - Analysis of data from collaborative studies reporting relationships between repeatibility, reproductibility and tolerances |
224 | AFNOR NF EN 302326-2-2006 | 2006-07-01 | French | Fixed radio systems - Multipoint Equipment and antennas - Part 2 : harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for digital multipoint radio equipment (V1.1.1) |
225 | AFNOR NF EN 50342-1-2006 | 2006-07-01 | French | Lead-acid starter batteries - Part 1 : general requirements and methods of test |
226 | AFNOR NF EN 61499-4-2006 | 2006-07-01 | French | Function blocks - Part 4 : rules for compliance profiles |
227 | AFNOR NF EN 301428-2006 | 2006-07-01 | French | Satellite Earth Stations and Systems (SES)- Harmonized EN for very small Aperture Terminal (VSAT) - Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under article 3.2 of the R&TTE directive (V1.3.1) |
228 | AFNOR NF H35-056-2006 | 2006-07-01 | French | Bottling industry - Glass bottles - 75 cl champagne bottle |
229 | AFNOR NF EN ISO 11737-1-2006 | 2006-07-01 | French | Sterilization of medical devices - Microbiological methods - Part 1 : determination of a population of microorganisms on products |
230 | AFNOR NF EN 61326-1-2006 | 2006-07-01 | French | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1 : general requirements |
231 | AFNOR NF EN 15058-2006 | 2006-07-01 | French | Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry |
232 | AFNOR NF ISO 18650-2-2006 | 2006-07-01 | French | Building construction machinery and equipment - Concrete mixers - Part 2 : procedure for examination of mixing efficiency |
233 | AFNOR NF EN 61326-2-1-2006 | 2006-07-01 | French | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1 : particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications |
234 | AFNOR NF H35-060-2006 | 2006-07-01 | French | Bottling industry - Glass bottles - "Six star" litre bottle |
235 | AFNOR NF EN 61326-2-2-2006 | 2006-07-01 | French | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2 : particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems |
236 | AFNOR CWA 15582-2006 | 2006-07-01 | French | e-Invoice Reference Model for EU VAT purposes specification |
237 | AFNOR NF EN ISO 3738-2-2006 | 2006-07-01 | French | Hardmetals - Rockwell hardness test (scale A) - Part 2 : preparation and calibration of standard test blocks |
238 | AFNOR NF EN 14944-1-2006 | 2006-07-01 | French | Influence of cementitious products on water intended for human consumption - Test methods - Part 1 : influence of factory made cementitious products on organoleptic parameters |
239 | AFNOR NF EN 61326-2-6-2006 | 2006-07-01 | French | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6 : particular requirements - In-vitro diagnostic (IVD) medical equipment |
240 | AFNOR CWA 15581-2006 | 2006-07-01 | French | Guidelines for eInvoicing Service Providers |
241 | AFNOR NF ISO 80000-3-2006 | 2006-07-01 | French | Quantities and units - Part 3 : space and time |
242 | AFNOR CWA 15580-2006 | 2006-07-01 | French | Storage of Electronic Invoices |
243 | AFNOR NF S99-171-2006 | 2006-07-01 | French | Maintenance of medical devices - Model and definition for establishment and management of the medical device security, quality and maintenance register (RSQM) |
244 | AFNOR NF EN 15055-2006 | 2006-07-01 | French | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS/MS method |
245 | AFNOR NF EN 50393-2006 | 2006-07-01 | French | Test methods and requirements for accessories for use on distribution cables of rated voltage 0,6/1,0 (1,2) kV |
246 | AFNOR NF EN 15054-2006 | 2006-07-01 | French | Non fatty foods - Determination of chlormequat and mepiquat - LC-MS method |
247 | AFNOR NF H35-120-2006 | 2006-07-01 | French | Bottling industry - Glass bottles - 75 cl "Non-returnable Bourgogne" bottle |
248 | AFNOR NF H35-121-2006 | 2006-07-01 | French | Bottling industry - Glas bottles - 75 cl "Non-returnable Bordeaux" bottle |
249 | AFNOR NF H35-122-2006 | 2006-07-01 | French | Bottling industry - Glass bottle - 75 cl "Traditionnal method" bottle |
250 | AFNOR NF H35-123-2006 | 2006-07-01 | French | Bottling industry - Glass bottles - "Bourgogne traditional" 75 cl bottle |
251 | AFNOR NF EN ISO 8502-11-2006 | 2006-07-01 | French | Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11 : field method for the turbidimetric determination of water-soluble sulfate |
252 | AFNOR NF H35-124-2006 | 2006-07-01 | French | Bottling industry - Glass bottles - "Bordeaux traditional" 75 cl bottle |
253 | AFNOR NF ISO 35/A1-2006 | 2006-07-01 | French | Natural rubber latex concentrate - Determination of mechanical stability - Amendement 1 : precision data |
254 | AFNOR NF EN 15051-2006 | 2006-07-01 | French | Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods |
255 | AFNOR NF ISO 8083-2006 | 2006-07-01 | French | Machinery for forestry - Falling-object protective structures (FOPS) - Laboratory tests and performance requirements |
256 | AFNOR CWA 15578-2006 | 2006-07-01 | French | Survey of VAT Data Element usage in the Member States and the use of codes for VAT Exemptions |
257 | AFNOR NF EN ISO 13468-2-2006 | 2006-07-01 | French | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2 : double-beam instrument |
258 | AFNOR NF ISO 3684/A1-2006 | 2006-07-01 | French | Conveyor belts - Determination of minimum pulley diameters |
259 | AFNOR NF EN ISO 11607-2-2006 | 2006-07-01 | French | Packaging for terminally sterilized medical devices - Part 2 : validation requirements for forming, sealing and assembly processes |
260 | AFNOR NF EN 10210-1-2006 | 2006-07-01 | French | Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1 : technical delivery conditions |
261 | AFNOR NF EN 1392-2006 | 2006-07-01 | French | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specific conditions |
262 | AFNOR CWA 15577-2006 | 2006-07-01 | French | A standardised set of codes with definitions to replace plain text clauses in elnvoice messages for VAT exemptions |
263 | AFNOR NF EN 4111-2006 | 2006-07-01 | French | Aerospace series - Wrenches, splined, socket for pipe fittings - Technical specification |
264 | AFNOR CWA 15557-2006 | 2006-07-01 | French | Scenarios and XML Templates for B2B in the Textile clothing Manufacturing and retail |
265 | AFNOR NF ISO 3864-3-2006 | 2006-07-01 | French | Graphical symbols - Safety colours and safety signs - Part 3 : design principles for graphical symbols use in safety signs |
266 | AFNOR NF ISO 8132-2006 | 2006-07-01 | French | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories |
267 | AFNOR NF ISO 5468-2006 | 2006-07-01 | French | Rotary and rotary impact masonry drill bits with hardmetal tips - Dimensions |
268 | AFNOR NF EN 14786-2006 | 2006-07-01 | French | Protective clothing - Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions - Atomizer test |
269 | AFNOR NF EN ISO 15023-1-2006 | 2006-07-01 | French | Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1 : designation system and basis for specifications |
270 | AFNOR NF EN ISO 15023-2-2006 | 2006-07-01 | French | Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 2 : determination of properties |
271 | AFNOR NF EN 61308-2006 | 2006-07-01 | French | High-frequency dielectric heating installations - Test methods for the determination of power output |
272 | AFNOR CWA 15576-2006 | 2006-07-01 | French | Recommandation to allow coded identifiers as an alternative to the current unstructured clear text identifications |
273 | AFNOR CWA 15575-2006 | 2006-07-01 | French | The list of invoice content details identified in the directive 2001/115/CE expressed as UN/CEFECT Core Components |
274 | AFNOR CWA 15574-2006 | 2006-07-01 | French | Commission Recommendation 1994/820/EC October 1994, proposed revision with the requirements of Directive 2001/115/EC, present day e-Commerce practices and revised definition of EDI Electronic Data Interchange |
275 | AFNOR NF EN 14764-2006 | 2006-07-01 | French | City and trekking bicycles - Safety requirements and test methods |
276 | AFNOR NF EN 725-8-2006 | 2006-07-01 | French | Advanced technical ceramics - Methods of test for ceramic powders - Part 8 : determination of tapped bulk density |
277 | AFNOR NF EN ISO 14663-1-2006 | 2006-07-01 | French | Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 1 : designation system and basis for specifications |
278 | AFNOR NF EN ISO 14663-2-2006 | 2006-07-01 | French | Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties |
279 | AFNOR NF EN 60601-2-27-2006 | 2006-07-01 | French | Medical electrical equipment - Part 2-27 : particular requirements for the safety, including essential performance, of electrocardiographic monitoring equipment |
280 | AFNOR NF H35-041-2006 | 2006-07-01 | French | Bottling industry - Glass bottles - 75 cl "pressure type" bottle |
281 | AFNOR NF EN 61347-2-8/A1-2006 | 2006-07-01 | French | Lamp controlgear - Part 2-8 : particular requirements for ballasts for fluorescent lamps |
282 | AFNOR NF H35-053-2006 | 2006-07-01 | French | Bottling industry - Glass bottles - 75 cl light "Fl没te Alsace" wine bottle |
283 | AFNOR NF EN 61377-1-2006 | 2006-07-01 | French | Railway applications - Rolling stock - Part 1 : combined testing of inverter-fed alternating current motors and their control |
284 | AFNOR XP E29-190-2-2006 | 2006-07-01 | French | Gas pressure regulators for distribution and service lines - Part 2 : type B Regulators |
285 | AFNOR NF EN 12999/A2-2006 | 2006-07-01 | French | Cranes - Loader cranes |
286 | AFNOR NF EN ISO 7784-1-2006 | 2006-07-01 | French | Paints and varnishes - Determination of resistance to abrasion - Part 1 : rotating abrasive-paper-covered wheel method |
287 | AFNOR NF EN 4172-2006 | 2006-07-01 | French | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, anodized, metric series - Classification : 1 100 MPa (at ambient temperature)/315 掳C |
288 | AFNOR FD S90-119-2006 | 2006-07-01 | French | Terminal units for medical gas pipeline systems - Terminal units for air for driving surgical tools and corresponding probes |
289 | AFNOR NF EN 12079-2-2006 | 2006-07-01 | French | Offshore containers and associated lifting sets - Part 2 : lifting sets - Design, manufacture and marking |
290 | AFNOR NF EN 12079-3-2006 | 2006-07-01 | French | Offshore containers and associated lifting sets - Part 3 : periodic inspection, examination and testing |
291 | AFNOR NF EN 60079-27-2006 | 2006-07-01 | French | Electrical apparatus for explosive gas atmospheres - Part 27 : fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO) |
292 | AFNOR NF EN ISO 4263-4-2006 | 2006-07-01 | French | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST Test - Part 4 : procedure for industrial gear oils |
293 | AFNOR NF EN 12517-1-2006 | 2006-07-01 | French | Non-destructive testing of welds - Part 1 : Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels |
294 | AFNOR NF ISO 6022-2006 | 2006-07-01 | French | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
295 | AFNOR NF EN 15074-2006 | 2006-07-01 | French | Chemicals used for treatment of swimming pool water - Ozone |
296 | AFNOR NF EN 54-21-2006 | 2006-07-01 | French | Fire detection and fire alarm systems - Part 21 : alarm transmission and fault warning routing equipment |
297 | AFNOR NF EN 60730-2-12-2006 | 2006-07-01 | French | Automatic electrical controls for household and similar use - Part 2-12 : particular requirements for electrically operated door locks - Modified by NF EN 60730-2-12/A11:200807 (C47-742/A11) |
298 | AFNOR NF EN ISO 3928-2006 | 2006-07-01 | French | Sintered metal materials, excluding hardmetals - Fatigue test pieces |
299 | AFNOR NF EN ISO 13944-2006 | 2006-07-01 | French | Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method |
300 | AFNOR XP T47-751-2006 | 2006-07-01 | French | Non reusable used tyres (NRUT) - Determination of the format of products from primary schredding - Manual method based on the measurement of the largest projected length |
301 | AFNOR NF ISO 6973-2006 | 2006-07-01 | French | Drop-forged rivetless chains for conveyors |
302 | AFNOR FD CEN/TR 15349-2006 | 2006-07-01 | French | Hardware for furniture - Terms for extension elements and their components |
303 | AFNOR NF ISO 6020-2-2006 | 2006-07-01 | French | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2 : compact series |
304 | AFNOR NF EN 15078-2006 | 2006-07-01 | French | Chemicals used for treatment of swimming pool water - Sulfuric acid |
305 | AFNOR FD CEN/TR 15252-2006 | 2006-07-01 | French | Characterisation of sludges - Protocol for validating methods for physical properties of sludges |
306 | AFNOR FD CEN/TR 15225-2006 | 2006-07-01 | French | Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars |
307 | AFNOR XP CEN/TS 15149-3-2006 | 2006-07-01 | French | Solid biofuels - Methods for the determination of particle size distribution - Part 3 : Rotary screen method |
308 | AFNOR XP CEN/TS 15185-2006 | 2006-07-01 | French | Furniture - Assessment of the surface resistance to abrasion |
309 | AFNOR XP CEN/TS 15186-2006 | 2006-07-01 | French | Furniture - Assessment of the surface resistance to scratching |
310 | AFNOR NF EN 14488-5-2006 | 2006-07-01 | French | Testing sprayed concrete - Part 5 : determination of energy absorption capacity of fibre reinforced slab specimens |
311 | AFNOR NF EN 14488-7-2006 | 2006-07-01 | French | Testing sprayed concrete - Part 7 : fibre content of fibre reinforced concrete |
312 | AFNOR NF DTU 65.14 P1-2006 | 2006-07-01 | French | Building works - Construction of hot water operated underfloor heating - Part 1 : contract hill of technical clauses - Separate, insulated floor tiles |
313 | AFNOR NF EN 130800/A1-2006 | 2006-07-01 | French | Sectional Specification : tantalum surface mounting capacitors |
314 | AFNOR NF P52-211-1/A2-2006 | 2006-07-01 | French | DTU 65.3 - Building works - Heat exchange installations for pressurised hot water - Part 1 : technical specifications |
315 | AFNOR NF EN 62271-108-2006 | 2006-07-01 | French | High-voltage switchgear and controlgear - Part 108 : high-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above |
316 | AFNOR NF EN 521-2006 | 2006-07-01 | French | Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
317 | AFNOR AC X50-194-2006 | 2006-07-01 | French | Management tools - Strategic Information management - Good practices and experience feedback |
318 | AFNOR AC X35-501-2006 | 2006-07-01 | French | Label Tourism and Handicap - Requirements |
319 | AFNOR NF EN 966/A2-2006 | 2006-07-01 | French | Helmets for airborne sports |
320 | AFNOR NF EN 14638-1-2006 | 2006-07-01 | French | Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1 : welded austenitic stainless steel cylinders made to a design justified by experimental methods |
321 | AFNOR AC H35-125-2006 | 2006-07-01 | French | Bottling industry - Glas bottles - Single flat glass finish |
322 | AFNOR UTE C66-558-2006 | 2006-07-01 | French | Capacitance graded outdoor bushing 52 kV up to 420 kV for oil immersed transformers |
323 | AFNOR UTE C71-802 F2-2006 | 2006-07-01 | French | Fiche d'interpr茅tation n掳71-802 F2 du guide UTE C71-802 d'avril 2001 |
324 | AFNOR NF EN 14877-2006 | 2006-07-01 | French | Synthetic surfaces for outdoor sports areas - Specification |
325 | AFNOR UTE C73-997-2006 | 2006-07-01 | French | Guidance for training maintenance technicians of refrigerators, freezers and combined appliances for household use employing a flammable refrigerant |
326 | AFNOR NF E29-011-2006 | 2006-07-01 | French | Pipework components - Termes and definition |
327 | AFNOR NF E29-041-2006 | 2006-07-01 | French | Industrial pipework - Reduced shank bolts - Specifications |
328 | AFNOR NF X08-003-1-2006 | 2006-07-01 | French | Graphical symbols - Safety colours and visual safety signs - Part 1 : design principles |
329 | AFNOR NF X08-003-3-2006 | 2006-07-01 | French | Graphical symbols - Safety colours and visual safety signs - Part 3 : standardized visual safety signs |
330 | AFNOR NF EN 14675-2006 | 2006-07-01 | French | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2, step 1) |
331 | AFNOR NF S84-801-2006 | 2006-07-01 | French | Horlogy - Wheel work shape and dimensions |
332 | AFNOR NF EN 14034-3-2006 | 2006-07-01 | French | Determination of explosion characteristics of dust clouds - Part 3 : determination of the lower explosion limit LEL of dust clouds |
333 | AFNOR NF EN 14034-2-2006 | 2006-07-01 | French | Determination of explosion characteristics of dust clouds - Part 2 : determination of the minimum rate of explosion pressure rise (dp/dt)max of dust clouds |
334 | AFNOR NF EN ISO 6270-2-2006 | 2006-07-01 | French | Paints and varnishes - Determination of resistance to humidity - Part 2 : procedure for exposing test specimens in condensation-water atmospheres |
335 | AFNOR NF EN ISO 16000-1-2006 | 2006-07-01 | French | Indoor air - Part 1 : general aspects of sampling strategy |
336 | AFNOR NF EN 60730-2-2/A1-2006 | 2006-07-01 | French | Automatic electrical controls for household and similar use - Part 2-2 : Particular requirements for thermal motor protectors |
337 | AFNOR NF ISO 11345-2006 | 2006-07-01 | French | Rubber - Assessment of carbon black and carbon black/silica dispersion - Rapid comparative methods |
338 | AFNOR NF EN ISO 16000-2-2006 | 2006-07-01 | French | Indoor air - Part 2 : sampling strategy for formaldehyde |
339 | AFNOR NF EN ISO 20837-2006 | 2006-07-01 | French | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for sample preparation for qualitative detection |
340 | AFNOR NF EN ISO 20838-2006 | 2006-07-01 | French | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Requirements for amplification and detection for qualitative methods |
341 | AFNOR NF EN ISO 13802-2006 | 2006-07-01 | French | Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing |
342 | AFNOR NF ISO 14442-2006 | 2006-07-01 | French | Water quality - Guidelines for algal growth inhibition tests with poorly soluble materials, volatile compounds, metals and waste water |
343 | AFNOR NF ISO 21869-2006 | 2006-07-01 | French | Rubber compounding ingredients - Magnesium oxide - Methods of test |
344 | AFNOR NF EN 60335-2-77-2006 | 2006-07-01 | French | Household and similar electrical appliances - Safety - Part 2-77 : particular requirements for pedestrian controlled mains-operated lawnmowers |
345 | AFNOR NF EN ISO 11137-1-2006 | 2006-07-01 | French | Sterilization of health care products - Radiation - Part 1 : requirements for development, validation and routine control of a sterilization process for medical devices |
346 | AFNOR NF B10-601-2006 | 2006-07-01 | French | Quarry products - Natural stones - General prescriptions for use of natural stones |
347 | AFNOR NF EN ISO 21469-2006 | 2006-07-01 | French | Safety of machinery - Lubricants with incidental product contact - Hygiene requirements |
348 | AFNOR NF EN 4401-2006 | 2006-07-01 | French | Aerospace series - Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification : 1 100 MPa (at ambient temperature) / 315 掳C |
349 | AFNOR NF EN 4402-2006 | 2006-07-01 | French | Aerospace series - Lockbolts, 100掳 countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification : 1 100 Mpa (at ambient temperature) / 315掳C |
350 | AFNOR NF EN ISO 7784-2-2006 | 2006-07-01 | French | Paints and varnishes - Determination of resistance to abrasion - Part 2 : rotating abrasive rubber wheel method |
351 | AFNOR NF EN 61744-2006 | 2006-07-01 | French | Calibration of fibre optic chromatic dispersion test sets |
352 | AFNOR NF EN ISO 11833-2-2006 | 2006-07-01 | French | Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics Part 2 : sheets of thickness less than 1mm |
353 | AFNOR NF EN ISO 11816-1-2006 | 2006-07-01 | French | Milk and milk products - Determination of alkaline phosphatase activity - Part 1 : fluorimetric method for milk and milk-based drinks |
354 | AFNOR NF EN 13369/A1-2006 | 2006-07-01 | French | Common rules for precast concrete products |
355 | AFNOR NF EN 1507-2006 | 2006-07-01 | French | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
356 | AFNOR NF EN ISO 7784-3-2006 | 2006-07-01 | French | Paints and varnishes - Determination of resistance to abrasion - Part 3 : reciprocating test panel method |
357 | AFNOR NF EN 54-3/A2-2006 | 2006-07-01 | French | Fire detection and fire alarm systems - Part 3 : fire alarm devices - Sounders |
358 | AFNOR FD T90-522-2006 | 2006-07-01 | French | Water quality - Sampling technical guide for the detection of Legionella in water |
359 | AFNOR FD T90-521-2006 | 2006-07-01 | French | Water quality - Sampling technical guide for the health monitoring of swimming pool and bathing water in compliance with the Public Health Code |
360 | AFNOR NF EN ISO 4022-2006 | 2006-07-01 | French | Permeable sintered metal materials - Determination of fluid permeability |
361 | AFNOR NF EN 14984-2006 | 2006-07-01 | French | Liming materials - Determination of product effect on soil pH - Soil incubation method |
362 | AFNOR NF EN 12079-1-2006 | 2006-07-01 | French | Offshore containers and associated lifting sets - Part 1 : offshore container - Design, manufacture and marking |
363 | AFNOR NF EN ISO 11064-7-2006 | 2006-06-01 | French | Ergonomic design of control centres - Part 7 : principles for the evaluation of control centres |
364 | AFNOR NF ISO 7097-1-2006 | 2006-06-01 | French | Nuclear fuel technology - Determination of uranium in solutions, uranium hexafluoride and solids - Part 1 : iron (II) reduction/potassium dichromate oxidation/titrimetric method |
365 | AFNOR NF EN 14872-2006 | 2006-06-01 | French | Bicycles - Accessories for bicycles - Luggage carriers |
366 | AFNOR NF EN 130800-2006 | 2006-06-01 | French | Sectional Specification : tantalum surface mounting capacitors - Modified by NF EN 130800/A1:200607 (C83-113/A1) |
367 | AFNOR NF ISO 24347-2006 | 2006-06-01 | French | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Dimensions of ball-type coupling device (80 mm) |
368 | AFNOR NF EN ISO 21570-2006 | 2006-06-01 | French | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods |
369 | AFNOR NF EN 130801-2006 | 2006-06-01 | French | Blank Detail Specification : tantalum surface mounting capacitors |
370 | AFNOR NF EN 15062-2006 | 2006-06-01 | French | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
371 | AFNOR NF P34-205-1/A1-2006 | 2006-06-01 | French | DTU 40.35 - Building works - Roofing with profiled sheeting made of coated steel sheet - Part 1 : technical clauses |
372 | AFNOR NF EN ISO 6360-7-2006 | 2006-06-01 | French | Dentistry - Number coding system for rotary instruments - Part 7 : specific characteristics of mandrels and special instruments |
373 | AFNOR NF ISO 5832-5-2006 | 2006-06-01 | French | Implants for surgery - Metallic materials - Part 5 : wrought cobalt-chromium-tungsten-nickel alloy |
374 | AFNOR NF EN 14988-2-2006 | 2006-06-01 | French | Children's high chair - Part 2 : test methods |
375 | AFNOR NF EN 60335-1/A12-2006 | 2006-06-01 | French | Household and similar electrical appliances - Safety - Part 1 : general requirements |
376 | AFNOR NF EN ISO 12086-1-2006 | 2006-06-01 | French | Plastics - Fluoropolymer dispersion and moulding and extrusion materials - Part 1 : designation system and basis for specifications |
377 | AFNOR NF EN 14988-1-2006 | 2006-06-01 | French | Children's high chair - Part 1 : safety requirements |
378 | AFNOR NF EN 1309-2-2006 | 2006-06-01 | French | Round and sawn timber - Method of measurement of dimensions - Part 2 : round timber - Requirements for measurement and volume calculation rules |
379 | AFNOR NF D60-013-2006 | 2006-06-01 | French | Protocol for assessment of the ignitability of upholstered furniture - Ignition source equivalent to a burning 20 g paper cushion - Coverings and upholstery materials |
380 | AFNOR NF EN 302326-1-2006 | 2006-06-01 | French | Fixed radio systems - Multipoint equipment and antennas - Part 1 : overview and requirements for digital multipoint radio systems (V1.1.1) |
381 | AFNOR NF EN 62040-2-2006 | 2006-06-01 | French | Uninterruptible power systems (UPS) - Part 2 : electromagnetic compatibility (EMC) requirements |
382 | AFNOR NF ISO 6299-2006 | 2006-06-01 | French | Petroleum products - Determination of dropping point of lubricating greases (wide temperature range) |
383 | AFNOR NF EN ISO 4167-2006 | 2006-06-01 | French | Polyolefin agricultural twines |
384 | AFNOR NF EN 62305-1-2006 | 2006-06-01 | French | Protection against lightning - Part 1 : general principles |
385 | AFNOR NF EN 1873-2006 | 2006-06-01 | French | Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods |
386 | AFNOR NF ISO 14064-1-2006 | 2006-06-01 | French | Greenhouse gases - Part 1 : specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
387 | AFNOR NF EN 13232-9-2006 | 2006-06-01 | French | Railway applications - Track - Switches and crossings - Part 9 : layouts |
388 | AFNOR NF EN 511-2006 | 2006-06-01 | French | Protective gloves against cold |
389 | AFNOR NF EN 12094-5-2006 | 2006-06-01 | French | Fixed firefighting systems - Components for gas extinguishing systems - Part 5 : requirements and test methods for high and low pressure selector valves and their actuators |
390 | AFNOR NF EN 12873-4-2006 | 2006-06-01 | French | Influence of materials on water intended for human consumption - Influence due to migration - Part 4 : test method for water treatment membranes |
391 | AFNOR NF EN 13232-7-2006 | 2006-06-01 | French | Railway applications - Track - Switches and crossings - Part 7 : crossings with moveable parts |
392 | AFNOR NF EN 1071-4-2006 | 2006-06-01 | French | Advanced technical ceramics - Methods of test for ceramic coatings - Part 4 : determination of chemical composition by electron probe microanalysis (EPMA) |
393 | AFNOR NF EN 12873-3-2006 | 2006-06-01 | French | Influence of materials on water intended for human consumption - Influence due to migration - Part 3 : test method for ion exchange and adsorbent resins |
394 | AFNOR NF ISO 11054-2006 | 2006-06-01 | French | Cutting tools - Designation of high-speed steel groups |
395 | AFNOR NF EN 12574-2-2006 | 2006-06-01 | French | Stationary waste containers - Part 2 : performance requirements and test methods |
396 | AFNOR NF EN 60684-3-233-2006 | 2006-06-01 | French | Flexible insulating sleeving - Part 3 : specifications for individual types of sleeving - Sheet 233 : heat-shrinkable, fluoroelastomer sleeving, flame-retarded, fluid resistant, shrink ratio 2:1 |
397 | AFNOR NF ISO 14064-2-2006 | 2006-06-01 | French | Greenhouse gases - Part 2 : specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements |
398 | AFNOR NF EN ISO 10322-2-2006 | 2006-06-01 | French | Ophthalmic optics - Semi-finished spectacle lens blanks - Part 2 : specifications for progressive power lens blanks |
399 | AFNOR NF EN 1996-2-2006 | 2006-06-01 | French | Eurocode 6 - Design of masonry structures - Part 2 : design considerations, selection of materials and execution of masonry |
400 | AFNOR NF EN ISO 10322-1-2006 | 2006-06-01 | French | Ophthalmic optics - Semi-finished spectacle lens blanks - Part 1 : specifications for single-vision and multifocal lens blanks |
401 | AFNOR UTE C77-220-2006 | 2006-06-01 | French | Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks |
402 | AFNOR NF EN 1996-3-2006 | 2006-06-01 | French | Eurocode 6 - Design of masonry structures - Part 3 : simplified calculation methods for unreinforced masonry structures |
403 | AFNOR NF ISO 7097-2-2006 | 2006-06-01 | French | Nuclear fuel technology - Determination of uranium in solutions, uranium hexafluoride and solids - Part 2 : iron (II) reduction/cerium (IV) oxidation/titrimetric method |
404 | AFNOR XP CEN/TS 15357-2006 | 2006-06-01 | French | Solid recovered fuels - Terminology, definitions and descriptions |
405 | AFNOR NF EN 806-3-2006 | 2006-06-01 | French | Specifications for installations inside buildings conveying water for human consumption - Part 3 : pipe sizing - Simplified mehod |
406 | AFNOR NF ISO 14064-3-2006 | 2006-06-01 | French | Greenhouse gases - Part 3 : specification with guidance for the validation and verification of greenhouse gas assertions |
407 | AFNOR XP CEN/TS 15358-2006 | 2006-06-01 | French | Solid recovered fuels - Quality management systems - Particular requirements for their application to the production of solid recovered fuels |
408 | AFNOR XP CEN/TS 15359-2006 | 2006-06-01 | French | Solid recovered fuels - Specifications and classes |
409 | AFNOR NF EN 3155-008-2006 | 2006-06-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 088 : contacts, electrical, male, type A, crimp, class S - Product standard |
410 | AFNOR NF ISO 13992-2006 | 2006-06-01 | French | Alpine touring ski-bindings - Requirements and test methods |
411 | AFNOR XP CEN/TS 14689-2006 | 2006-06-01 | French | Leather - Physical and mechanical tests - Determination of bagginess, creep and relaxation |
412 | AFNOR NF EN 3155-019-2006 | 2006-06-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 019 : contacts, electrical, female, type A, crimp, class S - Product standard |
413 | AFNOR NF EN 3155-018-2006 | 2006-06-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 018 : Contacts, electrical, male, type A, crimp, class S - Product standard |
414 | AFNOR NF EN ISO 463-2006 | 2006-06-01 | French | Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges |
415 | AFNOR NF EN 15086-2006 | 2006-06-01 | French | Foodstuffs - Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs |
416 | AFNOR NF EN ISO 10253-2006 | 2006-06-01 | French | Water quality - Marine algal growth inhibition test with Skeletonema costatum and Phaeodactylum tricornutum |
417 | AFNOR NF A57-711-2006 | 2006-06-01 | French | Foundry products - Aluminium, aluminium-, magnesium- and zinc - Alloys pressure die castings - Supplying |
418 | AFNOR NF EN 60705/A2-2006 | 2006-06-01 | French | Household microwave ovens - Methods for measuring performance |
419 | AFNOR NF T90-346-2006 | 2006-06-01 | French | Water quality - Dispersive products - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability |
420 | AFNOR NF EN 2266-003-2006 | 2006-06-01 | French | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 掳C and 200 掳C - Part 003 : ink jet printable - Product standard |
421 | AFNOR NF EN 301843-6-2006 | 2006-06-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for marine radio equipment and services - Part 6 : specific conditions for Earth Stations on board Vessels operating in frequency bands above 3GHz (V1.1.1) |
422 | AFNOR NF ISO 5834-2-2006 | 2006-06-01 | French | Implants for surgery - Ultra-high molecular-weight polyethylene - Part 2 : moulded forms |
423 | AFNOR NF EN 14471-2006 | 2006-06-01 | French | Chimneys - System chimneys with plastic flue liners - Requirements and test methods |
424 | AFNOR NF EN 15029-2006 | 2006-06-01 | French | Products used for treatment of water intended for human consumption - Iron (III) hydroxide oxide |
425 | AFNOR NF P99-334-2006 | 2006-06-01 | French | Road information and control : road control language - Application to traffic data processing and measurement units - Tests |
426 | AFNOR NF EN 1948-1-2006 | 2006-06-01 | French | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1 : sampling of PCDDs/PCDFs |
427 | AFNOR NF EN 62217-2006 | 2006-06-01 | French | Polymeric insulators for indoor and outdoor use with a nominal voltage greater than 1 000 V - General definitions, test methods and acceptance criteria |
428 | AFNOR NF ISO 16796-2006 | 2006-06-01 | French | Nuclear energy - Determination of Gd2O3 content in gadolinium fuel blends and gadolinium fuel pellets by atomic emission spectrometry using an inductively coupled plasma source (ICP-AES) |
429 | AFNOR NF EN 12691-2006 | 2006-06-01 | French | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to impact |
430 | AFNOR NF EN 61242/A12-2006 | 2006-06-01 | French | Electrical accessories - Cable reels for household and similar purposes |
431 | AFNOR NF EN 584-1-2006 | 2006-06-01 | French | Non destructive testing - Industrial radiographic film - Part 1 : classification of film systems for industrial radiography |
432 | AFNOR NF EN 14904-2006 | 2006-06-01 | French | Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification |
433 | AFNOR NF ISO 5389-2006 | 2006-06-01 | French | Turbocompressors - Performance test code |
434 | AFNOR NF EN 14900-2006 | 2006-06-01 | French | Textile floor coverings - Determination of the density of the textile fleece backing |
435 | AFNOR NF P99-321-1-2006 | 2006-06-01 | French | Road information and control - Road meteorological data collection systems - Part 1 : specifications |
436 | AFNOR NF EN ISO 17201-4-2006 | 2006-06-01 | French | Acoustics - Noise from shooting ranges - Part 4 : prediction of projectile sound |
437 | AFNOR NF EN 61347-2-3/A2-2006 | 2006-06-01 | French | Lamp controlgear - Part 2-3 : particular requirements for a.c. supplied electronic ballasts for fluorescent lamps |
438 | AFNOR NF EN 55013/A2-2006 | 2006-06-01 | French | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
439 | AFNOR NF EN 215/A1-2006 | 2006-06-01 | French | Thermostatic radiator valves - Requirements and test methods |
440 | AFNOR NF ISO 3160-1-2006 | 2006-06-01 | French | Watch-cases and accessories - Gold alloy coverings - Part 1 : general requirements |
441 | AFNOR NF EN 60929-2006 | 2006-06-01 | French | AC-Supplied electronic ballasts for tubular fluorescent lamps - Performance requirements |
442 | AFNOR NF EN ISO 22478-2006 | 2006-06-01 | French | Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection |
443 | AFNOR NF EN 60454-3-8-2006 | 2006-06-01 | French | Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre |
444 | AFNOR NF ISO 16795-2006 | 2006-06-01 | French | Nuclear energy - Determination of Gd2O3 content of gadolinium fuel pellets by X-ray fluorescence spectrometry |
445 | AFNOR NF E86-032-2006 | 2006-06-01 | French | Vertical cylindrical tanks of unalloyed and alloy steel - Skirts |
446 | AFNOR NF EN ISO 21787-2006 | 2006-06-01 | French | Industrial valves - Globe valves of thermoplastic materials |
447 | AFNOR NF EN 60311/A1-2006 | 2006-06-01 | French | Electric irons for household or similar use - Methods for measuring performance |
448 | AFNOR NF EN 60464-1/A1-2006 | 2006-06-01 | French | Varnishes used for electrical insulation - Part 1 : definitions and general requirements |
449 | AFNOR NF EN 60464-2/A1-2006 | 2006-06-01 | French | Varnishes used for electrical insulation - Part 2 : methods of test |
450 | AFNOR NF EN 60464-3-1/A1-2006 | 2006-06-01 | French | Varnishes used for electrical insulation - Part 3 : specifications for individual materials - Sheet 1 : ambient curing finishing varnishes |
451 | AFNOR NF EN ISO 19106-2006 | 2006-06-01 | French | Geographic information - Profiles |
452 | AFNOR NF EN 14460-2006 | 2006-06-01 | French | Explosion resistant equipment |
453 | AFNOR NF ISO 13203-2006 | 2006-06-01 | French | Chains, sprockets and accessories - List of equivalent terms |
454 | AFNOR NF EN 60512-9-3-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 9-3 : endurance test - Test 9c : mechanical operation (engaging/separating) with electrical load |
455 | AFNOR FD ISO/TR 15916-2006 | 2006-06-01 | French | Basic considerations for the safety of hydrogen systems |
456 | AFNOR NF EN 50310-2006 | 2006-06-01 | French | Application of equipotential bonding and earthing in buildings with information technology equipment |
457 | AFNOR NF EN 60512-12-2-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 12-2 : soldering tests - Test 12b : solderability, wetting, soldering iron method |
458 | AFNOR NF EN 581-1-2006 | 2006-06-01 | French | Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1 : general safety requirements |
459 | AFNOR NF EN 60512-12-3-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 12-3 : soldering tests - Test 12c : solderability, de-wetting |
460 | AFNOR NF EN 60512-12-4-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 12-4 : soldering tests - Test 12d : resistance to soldering heat, solder bath method |
461 | AFNOR NF EN 62129-2006 | 2006-06-01 | French | Calibration of optical spectrum analyzers |
462 | AFNOR NF EN 60512-12-5-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 12-5 : soldering tests - Test 12e : resistance to soldering heat, soldering iron method |
463 | AFNOR NF EN 60512-13-1-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 13-1 : mechanical operation tests - Test 13a : engaging and separating forces |
464 | AFNOR NF EN ISO 18757-2006 | 2006-06-01 | French | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
465 | AFNOR NF EN 60512-13-2-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 13-2 : mechanical operation tests - Test 13b : insertion and withdrawal forces |
466 | AFNOR NF EN 60512-13-5-2006 | 2006-06-01 | French | Connectors for electronic equipment - Tests and measurements - Part 13-5 : mechanical operation tests - Test 13e : polarizing and keying method |
467 | AFNOR NF EN ISO 18753-2006 | 2006-06-01 | French | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pyknometer |
468 | AFNOR NF EN 1948-2-2006 | 2006-06-01 | French | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2 : extraction and clean-up of PCDDs/PCDFs |
469 | AFNOR CEN/TS 772-22-2006 | 2006-06-01 | French | Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units |
470 | AFNOR NF T60-627-2006 | 2006-06-01 | French | Petroleum products and lubricants - Dropping point of lubricating greases - Automatic apparatus method |
471 | AFNOR NF E86-031-2006 | 2006-06-01 | French | Vertical cylindrical tanks of unalloyed and alloy steel - Supporting shoes |
472 | AFNOR NF EN 15028-2006 | 2006-06-01 | French | Chemicals used for treatment of water intended for human consumption - Sodium chlorate |
473 | AFNOR NF EN 14741-2006 | 2006-06-01 | French | Thermoplastics piping and ducting systems - Joints for buried non-pressure applications - Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure |
474 | AFNOR NF EN ISO 9241-110-2006 | 2006-06-01 | French | Ergonomics of human-system interaction - Part 110 : dialogue principles |
475 | AFNOR NF EN 13952/A1-2006 | 2006-06-01 | French | LPG Equipment and accessories - Filling procedures for LPG cylinders |
476 | AFNOR NF EN 13126-8-2006 | 2006-06-01 | French | Building hardware - Requirements and test methods for windows and doors heigt windows - Part 8 : tilt and turn, Tilt-First and Turn-Only hardware |
477 | AFNOR NF EN ISO 9342-2-2006 | 2006-06-01 | French | Optics and optical instruments - Test lenses for calibration of focimeters - Part 2 : test lenses for focimeters used for measuring contact lenses |
478 | AFNOR NF EN ISO 12625-8-2006 | 2006-06-01 | French | Tissue paper and tissue products - Part 8 : water absorption time and water-absorption capacity, basket-immersion test method |
479 | AFNOR NF E86-033-2006 | 2006-06-01 | French | Vertical cylindrical tanks of unalloyed and alloy steel - Subplates |
480 | AFNOR NF EN 60664-4-2006 | 2006-06-01 | French | Insulation coordination for equipment within low-voltage systems - Part 4 : consideration of high-frequency voltage stress |
481 | AFNOR NF EN 12094-6-2006 | 2006-06-01 | French | Fixed firefighting systems - Components for gas extinguishing systems - Part 6 : requirements and test methods for non-electrical disable devices |
482 | AFNOR FD X06-100-2006 | 2006-06-01 | French | Application of statistics - Aid for selection of the standardised statistical method satisfying user needs |
483 | AFNOR FD ISO 7331-2006 | 2006-06-01 | French | Ski-poles for alpine skiing - Requirements and test methods |
484 | AFNOR NF E48-421-2006 | 2006-06-01 | French | Hydraulic fluid power - Identification of cartride valves's housings of drilled blocks |
485 | AFNOR NF EN 1011-6-2006 | 2006-06-01 | French | Welding - Recommendation for welding of metallic materials - Part 6 : laser beam welding |
486 | AFNOR NF EN 62329-1-2006 | 2006-06-01 | French | Heat shrinkable moulded shapes - Part 1 : definitions and general requirements |
487 | AFNOR NF EN 725-9-2006 | 2006-06-01 | French | Advanced technical ceramics - Methods of test for ceramic powders - Part 9 : determination of un-tamped bulk density |
488 | AFNOR NF EN 60335-2-43/A1-2006 | 2006-06-01 | French | Household and similar electrical appliances - Safety - Part 2-43 : particular requirements for clothes dryers and towel rails |
489 | AFNOR NF E39-004-2006 | 2006-06-01 | French | District heating - Hot or cold water transport and distribution networks - Particularities of installation |
490 | AFNOR CWA 15556-3-2006 | 2006-06-01 | French | Product Description and Classification - Part 3 : results of development in harmonization of product classifications and in multinlingual electronic catalogues and their respective data modelling |
491 | AFNOR NF EN 61400-1-2006 | 2006-06-01 | French | Wind turbines - Part 1 : design requirements |
492 | AFNOR NF ISO 19932-1-2006 | 2006-06-01 | French | Equipment for crop protection - Knapsack sprayers - Part 1 : requirements and test methods |
493 | AFNOR NF EN 61755-1-2006 | 2006-06-01 | French | Fibre optic connector optical interfaces - Part 1 : optical interfaces for single mode non-dispersion shifted fibres - General and guidance |
494 | AFNOR NF EN 60384-19-1-2006 | 2006-06-01 | French | Fixed capacitors for use in electronic equipment - Part 19-1 : blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ |
495 | AFNOR NF E39-003-2006 | 2006-06-01 | French | District heating - Hot or cold water transport and distribution networks - Particularities of calculation |
496 | AFNOR NF EN 60384-19-2006 | 2006-06-01 | French | Fixed capacitors for use in electronic equipment - Part 19 : sectional specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors |
497 | AFNOR NF K11-112-2006 | 2006-06-01 | French | Production of cheques forms standardised - Production of cheques forms standardised according to NF K11-111 standard |
498 | AFNOR NF EN 61300-3-29-2006 | 2006-06-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29 : examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components |
499 | AFNOR NF EN 61788-6-2006 | 2006-06-01 | French | Superconductivity - Part 6 : mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors |
500 | AFNOR NF EN 14951-2006 | 2006-06-01 | French | Solid hardwood panelling and cladding - Machined profiles elements |
|