| Pos | standard Number | publication date | Language | Description |
| 1 | AFNOR NF ISO 9816-2007 | 2007-05-01 | French | Passenger cars - Power-off reactions of a vehicle in a turn - Open-loop test method |
| 2 | AFNOR NF EN 12372-2007 | 2007-05-01 | French | Natural stone test methods - Determination of flexural strength under concentrated load |
| 3 | AFNOR NF EN ISO 10939-2007 | 2007-05-01 | French | Ophthalmic instruments - Slit-lamp microscopes |
| 4 | AFNOR NF EN 4057-306-2007 | 2007-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 306 : heat ageing test |
| 5 | AFNOR NF T46-054-2007 | 2007-05-01 | French | Rubber - Identification - Infra-red spectrometric method |
| 6 | AFNOR UTE C43-893-2007 | 2007-05-01 | French | National wordings of laser warning labels |
| 7 | AFNOR NF EN 14411-2007 | 2007-05-01 | French | Ceramic tiles - Definitions, classification, characteristics and marking |
| 8 | AFNOR NF EN 12572-1-2007 | 2007-05-01 | French | Artificial climbing structures - Part 1 : safety requirements and test methods for ACS with protection points |
| 9 | AFNOR NF EN 14986-2007 | 2007-05-01 | French | Design of fans working in potentially explosive atmospheres |
| 10 | AFNOR NF ISO 2725-1-2007 | 2007-05-01 | French | Assembly tools for screw and nuts - Square drive sockets - Part 1 : hand-operated sockets |
| 11 | AFNOR NF EN 15169-2007 | 2007-05-01 | French | Characterization of waste - Determination of loss on ignition in waste, sludge and sediments |
| 12 | AFNOR NF EN ISO 6272-2-2007 | 2007-05-01 | French | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small-area indenter |
| 13 | AFNOR NF EN 15197-2007 | 2007-05-01 | French | Wood-based panels - Flaxboards - Specifications |
| 14 | AFNOR NF EN 61643-11/A11-2007 | 2007-05-01 | French | Low-voltage surge protective devices - Part 11 : surge protective devices connected to low-voltage power systems - Requirements and tests |
| 15 | AFNOR FD M60-304-2007 | 2007-05-01 | French | Nuclear energy - Nuclear fuel technology - Waste - Collection of the applicable documents for the characterization of radioactive waste and associated packages |
| 16 | AFNOR NF EN 15330-1-2007 | 2007-05-01 | French | Surfaces for sports areas - Synthetic turf and needle-punched surfaces primarily designed for outdoor use - Part 1 : specification for synthetic turf |
| 17 | AFNOR NF EN ISO 16000-5-2007 | 2007-05-01 | French | Indoor air - Part 5 : sampling strategy for volatile organic compounds (VOCs) |
| 18 | AFNOR NF D35-311-2007 | 2007-05-01 | French | Metal chimney - Extensible flexible metal connecting flue pipes |
| 19 | AFNOR NF EN 14983-2007 | 2007-05-01 | French | Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage |
| 20 | AFNOR NF EN 62271-202-2007 | 2007-05-01 | French | High-voltage switchgear and controlgear - Part 202 : high voltage/low voltage prefabricated substation |
| 21 | AFNOR NF ISO 9005-2007 | 2007-05-01 | French | Nuclear energy - Uranium dioxide powder and sintered pellets - Determination of oxygen/uranium atomic ratio by the amperometric method |
| 22 | AFNOR NF EN 1994-2/NA-2007 | 2007-05-01 | French | Eurocode 4 - Design of composite steel and concrete structures - Part 2 : general rules and rules for bridges - National Annex to NF EN 1994-2:2006 - General rules and rules for bridges |
| 23 | AFNOR FD CEN/TR 15463-2007 | 2007-05-01 | French | Characterisation of sludges - Physical consistency - Thixotropic behaviour and piling behaviour |
| 24 | AFNOR FD S52-324-2007 | 2007-05-01 | French | Climbing ropes - Recommendations concerning equipment, use, setting up, checking, maintenance and stocking |
| 25 | AFNOR XP CEN ISO/TS 20836-2007 | 2007-05-01 | French | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers |
| 26 | AFNOR NF EN 13384-3-2007 | 2007-05-01 | French | Chimneys - Thermal and fluid dynamic calculation methods - Part 3 : methods for the development of diagrams and tables for chimneys serving one heating appliance |
| 27 | AFNOR NF EN 4158-2007 | 2007-05-01 | French | Aerospace series - Paints and varnishes - Test method for measurement of electrical surface resistance of conductive layers |
| 28 | AFNOR NF EN 60730-1/A15-2007 | 2007-05-01 | French | Automatic electrical controls for household and similar use - Part 1 : general requirements |
| 29 | AFNOR NF T90-461/A2-2007 | 2007-05-01 | French | Water quality - Microbiology - Quality control of culture media |
| 30 | AFNOR UTE C53-240-6-2007 | 2007-05-01 | French | Adjustable speed electrical power drive systems - Part 6 : guide for determination of types of load duty and corresponding current ratings |
| 31 | AFNOR NF ISO 4195-2007 | 2007-05-01 | French | Conveyor belts with heat-resistant rubber covers - Heat resistance of covers - Requirements and test methods |
| 32 | AFNOR NF EN 10079-2007 | 2007-05-01 | French | Definition of steel products |
| 33 | AFNOR NF ISO 2725-2-2007 | 2007-05-01 | French | Assembly tools for screws and nuts - Square drive sockets - Part 2 : machine-operated sockets ("impact") |
| 34 | AFNOR NF EN 14688-2007 | 2007-05-01 | French | Sanitary appliances - Wash basins - Functional requirements and test methods |
| 35 | AFNOR NF EN 14989-1-2007 | 2007-05-01 | French | Chimneys - Requirements and test methods for metal chimneys and material independent air supply ducts for roomsealed heating applications - Part 1 : vertical air/flue terminals for C6-type appliances |
| 36 | AFNOR NF EN 14420-1+A1-2007 | 2007-05-01 | French | Hose fittings with clamp units - Part 1 : requirements, survey, designation and testing |
| 37 | AFNOR NF E24-403-2007 | 2007-05-01 | French | Belt drives - V-ribbed belts - Determination of linear density |
| 38 | AFNOR NF EN ISO 15004-2-2007 | 2007-05-01 | French | Ophthalmic instruments - Fundamental requirements and test methods - Part 2 : light hazard protection |
| 39 | AFNOR NF EN 14420-1/IN1-2007 | 2007-05-01 | French | Hose fittings with clamp units - Part 1 : requirements, survey, designation and testing |
| 40 | AFNOR NF EN ISO 4618-2007 | 2007-05-01 | French | Paints and varnishes - Terms and definitions |
| 41 | AFNOR NF EN ISO 15535-2007 | 2007-05-01 | French | General requirements for establishing anthropometric databases |
| 42 | AFNOR NF EN 10268-2007 | 2007-05-01 | French | Cold rolled steel flat products with higher yield strength for cold forming - Technical delivery conditions |
| 43 | AFNOR NF R15-505-2-2007 | 2007-05-01 | French | Belt drives - V-belts, V-ribbed belts or synchronous belts for the automotive industry - Part 2 : determination of tensile strength at break |
| 44 | AFNOR NF EN 15237-2007 | 2007-05-01 | French | Execution of special geotechnical works - Vertical drainage |
| 45 | AFNOR NF EN ISO 6504-3-2007 | 2007-05-01 | French | Paints and varnishes - Determination of hiding power - Part 3 : determination of contrast ratio of light-coloured paints at a fixed spreading rate |
| 46 | AFNOR NF EN ISO 12625-7-2007 | 2007-05-01 | French | Tissue paper and tissue products - |
| 47 | AFNOR NF EN 15034-2007 | 2007-05-01 | French | Heating boilers - Condensing heating boilers for fuel oil |
| 48 | AFNOR NF EN 12972-2007 | 2007-05-01 | French | Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks |
| 49 | AFNOR NF EN 61537-2007 | 2007-05-01 | French | Cable management - Cable tray systems and cable ladder systems |
| 50 | AFNOR NF EN 15036-1-2007 | 2007-05-01 | French | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1 : airborne noise emissions from heat generators |
| 51 | AFNOR NF EN 541-2007 | 2007-05-01 | French | Aluminium and aluminium alloys - Rolled products for cans, closures and lids - Specifications |
| 52 | AFNOR NF EN 1991-1-3/NA-2007 | 2007-05-01 | French | Eurocode 1 - Actions on structures - Part 1-3 : general actions - Snow loads - National annex to NF EN 1991-1-3:2004 - General actions - Snow loads |
| 53 | AFNOR NF P11-213-3/A1-2007 | 2007-05-01 | French | DTU 13.3 - Paving - Design, calculation and production - Part 3 : contract bill of technical clauses for paving for single-family houses |
| 54 | AFNOR NF T66-019-2007 | 2007-05-01 | French | Hydrocarbon binders - Bituminous emulsions - Determination of breaking point of an anionic emulsion |
| 55 | AFNOR NF EN 60317-0-5/A2-2007 | 2007-05-01 | French | Specifications for particular types of winding wires - Part 0-5 : general requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| 56 | AFNOR NF EN 771-5/CN-2007 | 2007-05-01 | French | Specifications for masonry units - Part 5 : manufactured stone masonry units - National addition to NF EN 771-5:2004 and its amendment A1:2005 |
| 57 | AFNOR NF P11-213-1/A1-2007 | 2007-05-01 | French | DTU 13.3 - Paving - Design, calculation and production - Part 1 : contract bill of technical clauses for paving for industrial or related use |
| 58 | AFNOR NF T65-012-2007 | 2007-05-01 | French | Hydrocarbon binders - Anionic emulsions of bitumen - Specifications |
| 59 | AFNOR FD ISO/CEI GUIDE 68-2007 | 2007-05-01 | French | Arrangements for the recognition and acceptance of conformity assessment results |
| 60 | AFNOR NF EN 61340-3-2-2007 | 2007-05-01 | French | Electrostatics - Part 3-2 : methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms |
| 61 | AFNOR NF DTU 60.31 P1-2-2007 | 2007-05-01 | French | Building works - Unplasticized polyvinyl chloride piping installation : cold water under pressure - Part 1-2 : general criteria for selection of materials |
| 62 | AFNOR NF EN 61000-4-1-2007 | 2007-05-01 | French | Electromagnetic compatibility (EMC) - Part 4-1 : testing and measurement techniques - Overview of IEC 61000-4 series |
| 63 | AFNOR NF EN 1936-2007 | 2007-05-01 | French | Natural stone test method - Determination of real density and apparent density, and of total and open porosity |
| 64 | AFNOR NF EN 3976-2007 | 2007-05-01 | French | Aerospace series - Titanium and titanium alloys - Test method - Chemical analysis for the determination of hydrogen content |
| 65 | AFNOR NF DTU 60.31 P1-1-2007 | 2007-05-01 | French | Building works - Unplasticized polyvinyl chloride piping installation : cold water under pressure - Part 1-1 : technical specifications |
| 66 | AFNOR NF EN 15036-2-2007 | 2007-05-01 | French | Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 2 : flue gas noise emissions at the outlet of the heat generator |
| 67 | AFNOR NF EN ISO 16720-2007 | 2007-05-01 | French | Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis |
| 68 | AFNOR NF DTU 60.31-2007 | 2007-05-01 | French | Building works - Unplasticized polyvinyl chloride piping installation : cold water under pressure - Part 1-1 : technical specifications - Part 1-2 : general criteria for selection of materials |
| 69 | AFNOR NF EN 771-4/CN-2007 | 2007-05-01 | French | Specifications for masonry units - Part 4 : autoclaved aerated concrete masonry units - National addition to NF EN 771-4:2004 and its amendment A1:2005 |
| 70 | AFNOR NF EN 50317/A2-2007 | 2007-05-01 | French | Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
| 71 | AFNOR NF EN 1991-4-2007 | 2007-05-01 | French | Eurocode 1 - Actions on structures - Part 4 : silos and tanks |
| 72 | AFNOR NF P11-213-2/A1-2007 | 2007-05-01 | French | DTU 13.3 - Paving - Design, calculation and production - Part 2 : contract bill of technical clauses for paving for use other than industrial or related uses |
| 73 | AFNOR NF EN 2349-318-2007 | 2007-04-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 318 : pick-up voltage at high temperature and drop-out voltage at low temperature |
| 74 | AFNOR NF EN 2349-317-2007 | 2007-04-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 317 : service life of coil switching device |
| 75 | AFNOR XP CEN/TR 13233-2007 | 2007-04-01 | French | Advanced technical ceramics - Notations and symbols |
| 76 | AFNOR NF EN 60934/A1-2007 | 2007-04-01 | French | Circuit-breakers for equipment (CBE) |
| 77 | AFNOR NF EN ISO 8192-2007 | 2007-04-01 | French | Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
| 78 | AFNOR NF ISO 16813-2007 | 2007-04-01 | French | Building environment design - Indoor environment - General principles |
| 79 | AFNOR NF EN 12277-2007 | 2007-04-01 | French | Mountaineering equipment - Harnesses - Safety requirements and test methods |
| 80 | AFNOR NF EN 14704-3-2007 | 2007-04-01 | French | Determination of the elasticity of fabrics - Part 3 : narrow fabrics |
| 81 | AFNOR NF EN ISO 9241-400-2007 | 2007-04-01 | French | Ergonomics of human-system interaction - Part 400 : principles and requirements for physical input devices |
| 82 | AFNOR NF EN 14420-4/IN1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 4 : flange connections |
| 83 | AFNOR NF EN ISO 1265-2007 | 2007-04-01 | French | Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles |
| 84 | AFNOR NF EN 771-3/CN-2007 | 2007-04-01 | French | Specifications for masonry units - Part 3 : aggregate concrete masonry units (Dense and light-weight aggregates) - National addition to NF EN 771-3:2004 and its amendement A1:2005 |
| 85 | AFNOR NF EN 1926-2007 | 2007-04-01 | French | Natural stone test methods - Determination of uniaxial compressive strength |
| 86 | AFNOR GA X43-132-2007 | 2007-04-01 | French | Stationary source emissions - Quality assurance of continuous emission monitoring systems - Application guide of NF EN 14181:2004, NF EN 13284-2:2004 and NF EN 14884:2006 |
| 87 | AFNOR NF ISO 10791-10-2007 | 2007-04-01 | French | Test conditions for machining centres - Part 10 : evaluation of thermal distortions |
| 88 | AFNOR NF EN 14420-4+A1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 4 : flange connections |
| 89 | AFNOR NF EN 570-2007 | 2007-04-01 | French | Aluminium and aluminium alloys - Impact extrusion slugs obtained from wrought products - Specification |
| 90 | AFNOR NF EN 55014-1-2007 | 2007-04-01 | French | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1 : emission - Modified by NF EN 55014-1/A1:200907 (C91-014-1/A1) |
| 91 | AFNOR NF EN 1991-3-2007 | 2007-04-01 | French | Eurocode 1 - Actions on structures - Part 3 : actions induced by cranes and machinery |
| 92 | AFNOR NF S61-211/CN-2007 | 2007-04-01 | French | Underground fire hydrants - National addition to NF EN 14339:2006 |
| 93 | AFNOR NF ISO 8332-2007 | 2007-04-01 | French | Rubber compounding ingredients - Sulfur - Methods of test |
| 94 | AFNOR NF EN 55020-2007 | 2007-04-01 | French | Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
| 95 | AFNOR NF EN 15146-2007 | 2007-04-01 | French | Solid softwood panelling and cladding - Machined profiles without tongue and groove |
| 96 | AFNOR NF EN 569-2007 | 2007-04-01 | French | Mountaineering equipment - Pitons - Safety requirements and test methods |
| 97 | AFNOR NF EN 10339-2007 | 2007-04-01 | French | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| 98 | AFNOR NF EN 10280/IN1-2007 | 2007-04-01 | French | Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| 99 | AFNOR NF EN 14420-8/IN1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 8 : symmetrical half coupling (Guillemin system) |
| 100 | AFNOR NF EN 1473-2007 | 2007-04-01 | French | Installation and equipment for liquefied natural gas - Design of onshore installations |
| 101 | AFNOR NF EN 4592-2007 | 2007-04-01 | French | Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance |
| 102 | AFNOR NF EN 55015-2007 | 2007-04-01 | French | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment - Modified by NF EN 55015/A1:200709 (C91-015/A1),NF EN 55015/A2:200905 (C91-015/A2) |
| 103 | AFNOR NF EN 14420-8+A1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 8 : symmetrical half coupling (Guillemin system) |
| 104 | AFNOR NF EN 14420-7/IN1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 7 : cam locking couplings |
| 105 | AFNOR NF EN 10280+A1-2007 | 2007-04-01 | French | Magnetic materials - Methods of measurement of the magnetic properties of electrical sheet and strip by means of a single sheet tester |
| 106 | AFNOR NF EN 14420-7+A1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 7 : cam locking couplings |
| 107 | AFNOR NF EN 14420-6/IN1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 6 : TW tank truck couplings |
| 108 | AFNOR NF EN 14704-2-2007 | 2007-04-01 | French | Determination of the elasticity of fabrics - Part 2 : multiaxial tests |
| 109 | AFNOR NF ISO 3338-2-2007 | 2007-04-01 | French | Cylindrical shanks for milling cutters - Part 2 : dimensional characteristics of flatted cylindrical shanks |
| 110 | AFNOR NF EN 12674-4-2007 | 2007-04-01 | French | Roll containers - Part 4 : performance requirements |
| 111 | AFNOR NF EN ISO 18412-2007 | 2007-04-01 | French | Water quality - Determination of chromium (VI) - Photometric method for weakly contaminated water |
| 112 | AFNOR NF ISO 1431-1-2007 | 2007-04-01 | French | Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 1 : static and dynamic strain testing - Modified by NF ISO 1431-1/A1:200907 (T46-019-1/A1) |
| 113 | AFNOR NF EN 14420-6+A1-2007 | 2007-04-01 | French | Hose fittings with clamp units - Part 6 : TW tank truck couplings |
| 114 | AFNOR NF EN 60027-3-2007 | 2007-04-01 | French | Letter symbols to be used in electrical technology - Part 3 : logarithmic and related quantities and their units |
| 115 | AFNOR NF EN 81-71/IN1-2007 | 2007-04-01 | French | Safety rules for the construction and installation of lifts - Particular applications to passenger and goods passenger lifts - Part 71 : vandal resistant lifts |
| 116 | AFNOR NF EN 81-71+A1-2007 | 2007-04-01 | French | Safety rules for the construction and installation of lifts - Particular applications to passenger and goods passenger lifts - Part 71 : vandal resistant lifts |
| 117 | AFNOR NF EN ISO 20776-1-2007 | 2007-04-01 | French | Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1 : reference method for testing the in vitro activity of anti |
| 118 | AFNOR NF EN 61300-2-47-2007 | 2007-04-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47 : tests - Thermal shocks |
| 119 | AFNOR NF EN 10130-2007 | 2007-04-01 | French | Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions |
| 120 | AFNOR NF ISO 23714-2007 | 2007-04-01 | French | Pulps - Determination of water retention value (WRV) |
| 121 | AFNOR NF ISO 1951-2007 | 2007-04-01 | French | Presentation/representation of entries in dictionaries - Requirements, recommendations and information |
| 122 | AFNOR NF DTU 53.2 P2-2007 | 2007-04-01 | French | Building works - PVC floor coverings - Part 2 : contract bill of special clauses |
| 123 | AFNOR NF DTU 53.2 P1-2-2007 | 2007-04-01 | French | Building works - PVC floor coverings - Part 1-2 : general criteria for selection materials |
| 124 | AFNOR NF DTU 53.2 P1-1-2007 | 2007-04-01 | French | Building works - PVC floor coverings - Part 1-1 : technical specifications |
| 125 | AFNOR NF DTU 53.2-2007 | 2007-04-01 | French | Building works - PVC foor coverings - Part 1-1 : technical specifications - Part 1-2 : general criteria for selection materials - Part 2 : contract bill of special clauses |
| 126 | AFNOR XP Q34-100-2007 | 2007-04-01 | French | Tissue paper and tissue products - Converted articles - Technical properties |
| 127 | AFNOR NF EN ISO 11507-2007 | 2007-04-01 | French | Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water |
| 128 | AFNOR NF EN ISO 16106-2007 | 2007-04-01 | French | Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 |
| 129 | AFNOR NF EN 14797-2007 | 2007-04-01 | French | Explosion venting devices |
| 130 | AFNOR NF EN 1993-3-2-2007 | 2007-04-01 | French | Eurocode 3 - Design of steel structures - Part 3-2 : towers, masts and chimneys - Chimneys |
| 131 | AFNOR NF EN 1993-1-11-2007 | 2007-04-01 | French | Eurocode 3 : design of steel structures - Part 1-11 : design of structures with tension components |
| 132 | AFNOR NF EN 1993-1-10/NA-2007 | 2007-04-01 | French | Eurocode 3 - Design of steel structures - Part 1-10 : material toughness and through-thickness properties - National Annex to NF EN 1993-1-10:2005 - Material toughness and through-thickness properties |
| 133 | AFNOR NF EN 1993-1-9/NA-2007 | 2007-04-01 | French | Eurocode 3 - Design of steel structures - Part 1-9 : fatigue - National Annex to NF EN 1993-1-9:2005 - Fatigue |
| 134 | AFNOR NF EN 1992-2/NA-2007 | 2007-04-01 | French | Eurocode 2 - design of concrete structures - Part 2 : concrete bridges - Design and detailing rules - National annex to NF EN 1992-2:2006 - Concrete bridges - Design and detailing rules |
| 135 | AFNOR NF EN ISO 1872-2-2007 | 2007-04-01 | French | Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties |
| 136 | AFNOR NF EN 60874-1-1-2007 | 2007-04-01 | French | Connectors for optical fibres and cables - Part 1-1 : blank detail specification |
| 137 | AFNOR NF EN 13964/A1-2007 | 2007-04-01 | French | Suspended ceilings - Requirements and test methods |
| 138 | AFNOR FD X43-070-2-2007 | 2007-04-01 | French | Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambiant air - Part 2 : estimation of uncertainty in automatic of SO2, NO, NOx, NO2, O3 et CO on site |
| 139 | AFNOR FD X43-070-1-2007 | 2007-04-01 | French | Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambiant air - Part 1 : general |
| 140 | AFNOR NF EN 60874-1-2007 | 2007-04-01 | French | Connectors for optical fibres and cables - Part 1 : generic specification |
| 141 | AFNOR FD X10-980-2007 | 2007-04-01 | French | Water wells and geothermal drilling - Construction, monitoring and dismantling of catchworks and wells to tap into underground water - Administrative process |
| 142 | AFNOR NF EN 13758-2/IN1-2007 | 2007-04-01 | French | Textiles - Solar UV protective properties - Part 2 : classification and marking of apparel |
| 143 | AFNOR NF EN 13758-2+A1-2007 | 2007-04-01 | French | Textiles - Solar UV protective properties - Part 2 : classification and marking of apparel |
| 144 | AFNOR NF EN 13758-1/IN1-2007 | 2007-04-01 | French | Textiles - Solar UV protective properties - Part 1 : method of test for apparel fabrics |
| 145 | AFNOR NF EN 13758-1+A1-2007 | 2007-04-01 | French | Textiles - Solar UV protective properties - Part 1 : method of test for apparel fabrics |
| 146 | AFNOR NF EN 60335-2-35/A1-2007 | 2007-04-01 | French | Household and similar electrical appliances - Safety - Part 2-35 : particular requirements for instantaneous water heaters |
| 147 | AFNOR NF EN 13501-5-2007 | 2007-04-01 | French | Fire classification of construction products and building elements - Part 5 : classification using data from external fire exposure to roofs tests |
| 148 | AFNOR NF EN 13501-3-2007 | 2007-04-01 | French | Fire classification of construction products and building elements - Part 3 : classification using data from fire resistance tests on products and elements used in building service installations : fire resisting ducts and fire dampers |
| 149 | AFNOR NF EN 61788-2-2007 | 2007-04-01 | French | Superconductivity - Part 2 : critical current measurement - DC critical current of Nb3Sn composite superconductors |
| 150 | AFNOR NF EN 161-2007 | 2007-04-01 | French | Automatic shut-off valves for gas burners and gas appliances |
| 151 | AFNOR CWA 15693-2007 | 2007-04-01 | French | Saving lifetimes of Energy Efficiency Improvement Measures in bottom-up calculations |
| 152 | AFNOR NF EN 62343-1-3-2007 | 2007-04-01 | French | Dynamic modules - Part 1-3 : performance standards - Dynamic gain tilt equalizer with pigtails for use in controlled environment (Category C) |
| 153 | AFNOR NF EN 15207-2007 | 2007-04-01 | French | Tanks for transport of dangerous goods -Plug/socket connection and supply characteristics for service equipment in hazardous areas with 24 V nominal supply voltage |
| 154 | AFNOR NF E29-210-2007 | 2007-04-01 | French | Industrial pipework - Orifice flanges for differential pressure devices |
| 155 | AFNOR NF E29-951-2007 | 2007-04-01 | French | Lenses and lens-shaped seals for flat or raised face flanges - PN 63 to PN 160 - Specifications |
| 156 | AFNOR NF S87-500-2007 | 2007-04-01 | French | Horology - Time transmission from masterclock to secondary clocks by coded signals on double-wound or wireless - Requirements |
| 157 | AFNOR FD CEN/TR 15441-2007 | 2007-04-01 | French | Solid recovered fuels - Guidelines on occupational health aspects |
| 158 | AFNOR NF ISO 9398-1-2007 | 2007-04-01 | French | Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 1 : flatwork ironing machines |
| 159 | AFNOR NF EN 14994-2007 | 2007-04-01 | French | Gas explosion venting protective systems |
| 160 | AFNOR NF EN ISO 2808-2007 | 2007-04-01 | French | Paints and varnishes - Determination of film thickness |
| 161 | AFNOR NF EN 1482-1-2007 | 2007-04-01 | French | Fertilizers and liming materials - Sampling and sample preparation - Part 1 : sampling |
| 162 | AFNOR NF ISO 9398-2-2007 | 2007-04-01 | French | Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 2 : batch drying tumblers |
| 163 | AFNOR NF EN 50083-2-2007 | 2007-04-01 | French | Cable networks for television signals, sound signals and interactive services - Part 2 : electromagnetic compatibility for equipment |
| 164 | AFNOR NF EN 1995-1-2/NA-2007 | 2007-04-01 | French | Eurocode 5 - design of timber structures - Part 1-2 : General - Structural fire design - National Annex to NF EN 1995-1-2:2005 - General - Structural fire design |
| 165 | AFNOR NF EN ISO 2812-3-2007 | 2007-04-01 | French | Paints and varnishes - Determination of resistance to liquids - Part 3 : method using an absorbent medium |
| 166 | AFNOR NF EN 61300-2-16-2007 | 2007-04-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-16 : tests - Moult growth |
| 167 | AFNOR NF ISO 9186-1-2007 | 2007-04-01 | French | Graphical symbols - Test methodes - Part 1 : methods for testing comprehensibility |
| 168 | AFNOR NF ISO 132-2007 | 2007-04-01 | French | Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) |
| 169 | AFNOR NF EN ISO 2812-1-2007 | 2007-04-01 | French | Paints and varnishes - Determination of resistance to liquids - Part 1 : immersion in liquids other than water |
| 170 | AFNOR XP CEN/TS 15277-2007 | 2007-04-01 | French | Non-active surgical implants - Injectable implants |
| 171 | AFNOR NF EN 60974-4-2007 | 2007-04-01 | French | Arc welding equipment - Part 4 : in-service inspection and testing |
| 172 | AFNOR NF ISO 247-2007 | 2007-04-01 | French | Rubber - Determination of ash |
| 173 | AFNOR NF EN 61287-1-2007 | 2007-04-01 | French | Railway applications - Power convertors installed on board rolling stock - Part 1 : characteristics and test methods |
| 174 | AFNOR NF EN 1085-2007 | 2007-04-01 | French | Wastewater treatment - Vocabulary |
| 175 | AFNOR NF S61-213/CN-2007 | 2007-04-01 | French | Pillar fire hydrants - National addition to NF EN 14384:2006 |
| 176 | AFNOR NF X10-999-2007 | 2007-04-01 | French | Water wells and geothermal drilling - Construction, monitoring and dismantling of catchworks and wells to tap into underground water |
| 177 | AFNOR NF EN ISO 2812-2-2007 | 2007-04-01 | French | Paints and varnishes - Determination of resistance to liquids - Part 2 : water immersion method |
| 178 | AFNOR NF ISO 281-2007 | 2007-04-01 | French | Rolling bearings - Dynamic load ratings and rating life |
| 179 | AFNOR NF EN ISO 787-25-2007 | 2007-04-01 | French | General methods of test for pigments and extenders - Part 25 : comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method |
| 180 | AFNOR NF X20-704-2007 | 2007-04-01 | French | Class 2 electronic breath tester - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods |
| 181 | AFNOR NF ISO 9398-3-2007 | 2007-04-01 | French | Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 3 : washing tunnels |
| 182 | AFNOR NF EN 62290-1-2007 | 2007-04-01 | French | Railway applications - Urban guided transport management and command/control Systems - Part 1 : system principles and fundamental concepts |
| 183 | AFNOR NF ISO 22037-2007 | 2007-04-01 | French | Solid end mills with corner radii and cylindrical shanks made of hard cutting materials - Dimensions |
| 184 | AFNOR NF EN 1482-2-2007 | 2007-04-01 | French | Fertilizers and liming materials - Sampling and sample preparation - Part 2 : sample preparation |
| 185 | AFNOR NF EN 997/A1-2007 | 2007-04-01 | French | WC pans and WC suites with integral trap |
| 186 | AFNOR NF EN 1995-2/NA-2007 | 2007-04-01 | French | Eurocode 5 : design of timber structures - Part 2 : bridges - National Annex to NF EN 1995-2:2005 - Bridges |
| 187 | AFNOR NF EN 60155/A2-2007 | 2007-04-01 | French | Glow-starters for fluorescent lamps |
| 188 | AFNOR NF EN ISO 2812-5-2007 | 2007-04-01 | French | Paints and varnishes - Determination of resistance to liquids - Part 5 : temperature-gradient oven method |
| 189 | AFNOR UTE C90-483-2007 | 2007-04-01 | French | Residential cabling systems of communication networks |
| 190 | AFNOR NF EN ISO 2812-4-2007 | 2007-04-01 | French | Paints and varnishes - Determination of resistance to liquids - Part 4 : spotting methods |
| 191 | AFNOR NF EN 1994-1-1/NA-2007 | 2007-04-01 | French | Eurocode 4 : Design of composite steel and concrete structures - Part 1-1 : general rules and rules for buildings - National Annex to NF EN 1994-1-1:2005 - General rules and rules for buildings |
| 192 | AFNOR NF EN 12588-2007 | 2007-04-01 | French | Lead and lead alloys - Rolled lead sheet for building purposes |
| 193 | AFNOR NF E24-404-2007 | 2007-04-01 | French | Belt drives - V-ribbed belts - Determination of measurement of pitch, angle and cord position |
| 194 | AFNOR NF EN 4406-2007 | 2007-04-01 | French | Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant |
| 195 | AFNOR NF E03-619-2007 | 2007-04-01 | French | ISO metric trapezoidal screw threads - Checking by limit gauges |
| 196 | AFNOR NF ISO 639-3-2007 | 2007-04-01 | French | Codes for the representation of names of languages - Part 3 : alpha-3 code for comprehensive coverage of languages |
| 197 | AFNOR NF E03-612-2007 | 2007-04-01 | French | Asymmetrical trapezoidal screw thread, artillery type, 3掳 - 45掳 - Checking by limit gauges |
| 198 | AFNOR NF EN 61300-2-38-2007 | 2007-04-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38 : tests - Sealing for fibre optic closures |
| 199 | AFNOR NF EN 14358-2007 | 2007-04-01 | French | Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample |
| 200 | AFNOR NF E03-611-2007 | 2007-04-01 | French | Asymmetrical trapezoidal screw thread, artillery type, 3掳 - 45掳 - Basic profile - Dimensions and tolerances |
| 201 | AFNOR NF ISO 9398-4-2007 | 2007-04-01 | French | Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Part 4 : washer-extractors |
| 202 | AFNOR XP CEN/TS 15173-2007 | 2007-03-01 | French | Gas supply systems - Frame of reference regarding Pipeline Integrity Management System (PIMS) |
| 203 | AFNOR NF DTU 43.6 P2-2007 | 2007-03-01 | French | Building works - Damp-proofing of interior masonry floors with bitumen products - Part 2 : contract bill of special clauses |
| 204 | AFNOR NF DTU 43.6 P1-2-2007 | 2007-03-01 | French | Building works - Damp-proofing of interior masonry floors with bitumen products - Part 1-2 : general criteria for selection of materials |
| 205 | AFNOR NF EN 60565-2007 | 2007-03-01 | French | Underwater acoustics - Hydrophones - Calibration in the frequency range 0,01 Hz to 1 MHz |
| 206 | AFNOR NF EN 14561-2007 | 2007-03-01 | French | Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of bactericidal activity for instruments used in medical area - Test method and requirements (phase 2, step 2) |
| 207 | AFNOR NF ISO 2780-2007 | 2007-03-01 | French | Milling cutters with tenon drive - Interchangeability dimensions with cutter arbors - Metric series |
| 208 | AFNOR NF EN 14538-2007 | 2007-03-01 | French | Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES) |
| 209 | AFNOR FD CEN/TR 15310-1-2007 | 2007-03-01 | French | Characterization of waste - Sampling of waste materials - Part 1 : guidance on selection and application of criteria for sampling under various conditions |
| 210 | AFNOR XP CEN/TS 15084-2007 | 2007-03-01 | French | Liming materials - Guide to the determination of the lime requirement |
| 211 | AFNOR NF ISO 14256-2-2007 | 2007-03-01 | French | Soil quality - Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution - Part 2 : automated method with segmented flow analysis |
| 212 | AFNOR NF EN 516-2007 | 2007-03-01 | French | Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps |
| 213 | AFNOR NF EN 60335-2-79/A1-2007 | 2007-03-01 | French | Household and similar electrical appliances - Safety - Part 2-79 : particular requirements for high pressure cleaners and steam cleaners |
| 214 | AFNOR FD CEN/TR 15310-2-2007 | 2007-03-01 | French | Characterization of waste - Sampling of waste materials - Part 2 : Guidance on sampling techniques |
| 215 | AFNOR XP CEN/TS 14541-2007 | 2007-03-01 | French | Plastics pipes and fittings for non-pressure applications - Utilisation of non-virgin PVC-U, PP and PE materials |
| 216 | AFNOR FD CEN/TR 15310-3-2007 | 2007-03-01 | French | Characterization of waste - Sampling of waste materials - Part 3 : guidance on procedures for sub-sampling in the field |
| 217 | AFNOR NF EN 14876-2007 | 2007-03-01 | French | Transportable gas cylinders - Periodic inspection and testing of welded steel pressure drums |
| 218 | AFNOR XP CEN/TS 15506-2007 | 2007-03-01 | French | Foodstuffs - Determination of trace elements - Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS) |
| 219 | AFNOR NF B52-001-2007 | 2007-03-01 | French | Regulations governing the use of timber in structure - Visual classification for the use of French coniferous and deciduous sawn timber in structures - Modified by NF B52-001/A1:200903 (B52-001/A1) |
| 220 | AFNOR NF EN 61300-2-33-2007 | 2007-03-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33 : tests - Assembly and disassembly of fibre optic closures |
| 221 | AFNOR FD CEN/TR 15310-4-2007 | 2007-03-01 | French | Characterization of waste - Sampling of waste materials - Part 4 : guidance on procedures for sample packaging, storage, preservation, transport and delivery |
| 222 | AFNOR FD CEN/TR 15310-5-2007 | 2007-03-01 | French | Characterization of waste - Sampling of waste materials - Part 5 : guidance on the process of defining the sampling plan |
| 223 | AFNOR NF EN 14346-2007 | 2007-03-01 | French | Characterization of waste - Calculation of dry matter by determination of dry residue and water content |
| 224 | AFNOR NF ISO 22309-2007 | 2007-03-01 | French | Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) |
| 225 | AFNOR NF EN 683-3-2007 | 2007-03-01 | French | Aluminium and aluminium alloys - Finstock - Part 3 : tolerances on dimensions and form |
| 226 | AFNOR FD CEN/TR 15472-2007 | 2007-03-01 | French | Postal services - Measurement of transit times for parcels by the use of a track and trace system |
| 227 | AFNOR XP ISO/TS 16610-41-2007 | 2007-03-01 | French | Geometrical product specifications (GPS) - Filtration - Part 41 : morphological profile filters : disk and horizontal line-segment filters |
| 228 | AFNOR NF DTU 43.6-2007 | 2007-03-01 | French | Building works - Damp-proofing of interior masonry floors with bitumen products - Part 1-1 : contract bill of technical clauses - Part 1-2 : general criteria for selection of materials - Part 2 : contract bill of special clauses - Part 3 : guide intended for the contracting authority |
| 229 | AFNOR FD CEN/TR 15545-2007 | 2007-03-01 | French | Guide to the use of EN 545 |
| 230 | AFNOR FD CEN/TR 15547-2007 | 2007-03-01 | French | Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics |
| 231 | AFNOR NF EN 15091-2007 | 2007-03-01 | French | Sanitary tapware - Electronic opening and closing sanitary tapware |
| 232 | AFNOR NF EN 60118-4-2007 | 2007-03-01 | French | Electroacoustics - Hearing aids - Part 4 : induction loop systems for hearing aid purposes - Magnetic field strength |
| 233 | AFNOR NF EN 10021-2007 | 2007-03-01 | French | General technical delivery requirements for steel products |
| 234 | AFNOR NF EN 15199-1-2007 | 2007-03-01 | French | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1 : middle distillates and lubricating base oils |
| 235 | AFNOR NF EN 61672-3-2007 | 2007-03-01 | French | Electroacoustics - Sound level meters - Part 3 : periodic tests |
| 236 | AFNOR NF EN 683-2-2007 | 2007-03-01 | French | Aluminium and aluminium alloys - Finstock - Part 2 : mechanical properties |
| 237 | AFNOR NF EN 683-1-2007 | 2007-03-01 | French | Aluminium and aluminium alloys - Finstock - Part 1 : technical conditions for inspection and delivery |
| 238 | AFNOR NF ISO 22489-2007 | 2007-03-01 | French | Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy |
| 239 | AFNOR NF ISO 7207-1-2007 | 2007-03-01 | French | Implants for surgery - Components for partial and total knee joint prostheses - Part 1 : classification, definitions and designation of dimensions |
| 240 | AFNOR NF EN 14987-2007 | 2007-03-01 | French | Plastics - Evaluation of disposability in waste water treatment plants - Test scheme for final acceptance and specifications |
| 241 | AFNOR NF EN 14822-1-2007 | 2007-03-01 | French | Health informatics - General purpose information components - Part 1 : overview |
| 242 | AFNOR NF EN ISO 21487-2007 | 2007-03-01 | French | Small craft - Permanently installed petrol and diesel fuel tanks |
| 243 | AFNOR NF DTU 43.6 P1-1-2007 | 2007-03-01 | French | Building works - Damp-proofing of interior masonry floors with bitumen products - Part 1-1 : contract bill of technical clauses |
| 244 | AFNOR NF EN 14359-2007 | 2007-03-01 | French | Gas-loaded accumulators for fluid power applications |
| 245 | AFNOR NF EN ISO 180/A1-2007 | 2007-03-01 | French | Plastics - Determination of Izod impact strength - Amendment 1 |
| 246 | AFNOR NF EN ISO 140-18-2007 | 2007-03-01 | French | Acoustics - Measurement of sound insulation in buildings and of building elements - Part 18 : laboratory measurement of sound generated by rainfall on building elements |
| 247 | AFNOR NF EN ISO 2692-2007 | 2007-03-01 | French | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement |
| 248 | AFNOR NF EN 61000-6-4-2007 | 2007-03-01 | French | Electromagnetic compatibility (EMC) - Part 6-4 : generic standards - Emission standard for industrial environments |
| 249 | AFNOR NF EN 61000-6-3-2007 | 2007-03-01 | French | Electromagnetic compatibility (EMC) - Part 6-3 : generic standards - Emission standard for residential, commercial and light-industrial environments |
| 250 | AFNOR NF EN 1998-4-2007 | 2007-03-01 | French | Eurocode 8 : design of structures for earthquake resistance - Part 4 : silos, tanks and pipelines |
| 251 | AFNOR NF EN 61000-6-1-2007 | 2007-03-01 | French | Electromagnetic compatibility (EMC) - Part 6-1 : generic standards - Immunity for residential, commercial and light-industrial environments |
| 252 | AFNOR UTE C48-331-1-2007 | 2007-03-01 | French | Interpretations of the Technical Committee CLC/TC 79 "Alarm systems" on the european standard EN 50131-1:2006 "Alarm Systems - Intrusion and Hold-up Systems - Part 1 : system Requirements" |
| 253 | AFNOR NF EN 55016-2-3-2007 | 2007-03-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3 : methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| 254 | AFNOR NF EN 15035-2007 | 2007-03-01 | French | Heating boilers - Special requirements for oil fired room sealed units up to 70 kW |
| 255 | AFNOR NF EN 564-2007 | 2007-03-01 | French | Mountaineering equipment - Accessory cord - Safety requirements and test methods |
| 256 | AFNOR NF EN 55022-2007 | 2007-03-01 | French | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement - Modified by NF EN 55022/A1:200805 (C91-022/A1) |
| 257 | AFNOR NF EN ISO 15502-2007 | 2007-03-01 | French | Household refrigerating appliances - Characteristics and test methods |
| 258 | AFNOR NF EN 546-1-2007 | 2007-03-01 | French | Aluminium and aluminium alloys - Foil - Part 1 : technical conditions for inspection and delivery |
| 259 | AFNOR NF EN 2349-405-2007 | 2007-03-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 405 : fluid resistance |
| 260 | AFNOR XP ISO/TS 22595-1-2007 | 2007-03-01 | French | Dentistry - Plant area equipment - Part 1 : suction systems |
| 261 | AFNOR NF EN 927-5-2007 | 2007-03-01 | French | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5 : assessment of the liquid water permeability |
| 262 | AFNOR NF ISO 3442-3-2007 | 2007-03-01 | French | Machine tools - Dimensions and geometric tests for self-centring chucks with two-piece jaws - Part 3 : power operated chucks with serrated jaws |
| 263 | AFNOR NF EN 60947-5-8-2007 | 2007-03-01 | French | Low-voltage switchgear and controlgear - Part 5-8 : control circuit devices and switching elements - Three-position enabling switches |
| 264 | AFNOR NF EN 55016-1-2/A2-2007 | 2007-03-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2 : radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances |
| 265 | AFNOR NF EN 55016-1-3-2007 | 2007-03-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3 : radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power |
| 266 | AFNOR NF EN 2349-402-2007 | 2007-03-01 | French | Aeospace series - Requirements and test procedures for relays and contactors - Part 402 : corrosion, salt spray |
| 267 | AFNOR NF EN 61000-4-12-2007 | 2007-03-01 | French | Electromagnetic compatibility (EMC) - Part 4-12 : testing and measurement techniques - Ring wave immunity test |
| 268 | AFNOR NF EN 60317-0-6/A1-2007 | 2007-03-01 | French | Specifications for particular types of winding wires - Part 0-6 : general requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire |
| 269 | AFNOR NF EN ISO 1522-2007 | 2007-03-01 | French | Paints and varnishes - Pendulum damping test |
| 270 | AFNOR FD CEN/TR 14742-2007 | 2007-03-01 | French | Characterization of sludges - Laboratory chemical conditioning procedure |
| 271 | AFNOR NF EN 2349-319-2007 | 2007-03-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 319 : miss test |
| 272 | AFNOR NF EN 61000-4-5-2007 | 2007-03-01 | French | Electromagnetic Compatibility (EMC) - Part 4-5 : testing and measurement techniques - Surge immunity test |
| 273 | AFNOR XP P34-900/CN-2007 | 2007-03-01 | French | Self-supporting double skin metal faced insulating panels - Factory made products - Specification - National addition to NF EN 14509:2006 |
| 274 | AFNOR NF EN 60947-8/A1-2007 | 2007-03-01 | French | Low-voltage switchgear and controlgear - Part 8 : control units for built-in thermal protection (PTC) for rotating electrical machines |
| 275 | AFNOR XP CEN/TS 13547-2007 | 2007-03-01 | French | Industrial valves - Copper alloy ball valves |
| 276 | AFNOR NF EN ISO 12402-7-2007 | 2007-03-01 | French | Personal flotation devices - Part 7 : materials and components - Safety requirements and test methods |
| 277 | AFNOR NF EN ISO 1269-2007 | 2007-03-01 | French | Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) |
| 278 | AFNOR FD X60-100-2007 | 2007-03-01 | French | Maintenance - Preconditions to the maintenance contracts - Inventories and evaluation for the states of items |
| 279 | AFNOR NF EN 62231-2007 | 2007-03-01 | French | Composite station post insulators for substations with a.c. voltages greater than 1 000 V up to 245 kV - Definitions, test methods and acceptance criteria |
| 280 | AFNOR NF EN 2349-316-2007 | 2007-03-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 316 : Mechanical life (endurance at reduced load) |
| 281 | AFNOR NF EN 2349-312-2007 | 2007-03-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 312 : Electrical service life - Mixed load |
| 282 | AFNOR NF EN ISO 9227-2007 | 2007-03-01 | French | Corrosion tests in artificial atmospheres - Salt spray tests |
| 283 | AFNOR NF EN ISO 10535-2007 | 2007-03-01 | French | Hoists for the transfer of disabled persons - Requirements and test methods |
| 284 | AFNOR NF EN 546-2-2007 | 2007-03-01 | French | Aluminium and aluminium alloys - Foil - Part 2 : mechanical properties |
| 285 | AFNOR NF EN 61241-0-2007 | 2007-03-01 | French | Electrical apparatus for use in the presence of combustible dust - Part 0 : general requirements |
| 286 | AFNOR UTE C17-202-2007 | 2007-03-01 | French | Installations of temporary illumination by garlands, lighting decorative systems or luminaries |
| 287 | AFNOR NF EN 14438-2007 | 2007-03-01 | French | Gas-fired insets designed for heating more than one room |
| 288 | AFNOR NF EN 546-3-2007 | 2007-03-01 | French | Aluminium and aluminium alloys - Foil - Part 3 : tolerances on dimensions |
| 289 | AFNOR NF EN 546-4-2007 | 2007-03-01 | French | Aluminium and aluminium alloys - Foil - Part 4 : special property requirements |
| 290 | AFNOR NF EN 566-2007 | 2007-03-01 | French | Mountaineering equipment - Slings - Safety requirements and test methods |
| 291 | AFNOR NF EN 61241-4-2007 | 2007-03-01 | French | Electrical apparatus for use in the presence of combustible dust - Part 4 : type of protection "pD" |
| 292 | AFNOR NF EN 61241-11-2007 | 2007-03-01 | French | Electrical apparatus for use in the presence of combustible dust - Part 11 : protection by intrinsic safety "iD" |
| 293 | AFNOR NF EN 15257-2007 | 2007-03-01 | French | Cathodic protection - Competence levels and certification of cathodic protection personnel |
| 294 | AFNOR NF ISO 6690-2007 | 2007-03-01 | French | Milking machine installations - Mechanical tests |
| 295 | AFNOR NF EN 61274-1-1-2007 | 2007-03-01 | French | Adaptors for fibre optic connectors - Part 1-1 : blank detail specification |
| 296 | AFNOR NF EN 60670-22-2007 | 2007-03-01 | French | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22 : particular requirements for connecting boxes and enclosures |
| 297 | AFNOR NF EN 14140/IN1-2007 | 2007-03-01 | French | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| 298 | AFNOR NF EN 565-2007 | 2007-03-01 | French | Mountaineering equipment - Tape - Safety requirements and test methods |
| 299 | AFNOR NF EN 14140+A1-2007 | 2007-03-01 | French | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| 300 | AFNOR NF EN 15115-2007 | 2007-03-01 | French | Textile floor coverings - Determination of sensitivity to spilled water |
| 301 | AFNOR NF EN 60079-7-2007 | 2007-03-01 | French | Explosive atmospheres - Part 7 : equipment protection by increased safety "e" |
| 302 | AFNOR NF EN 60079-11-2007 | 2007-03-01 | French | Explosive atmospheres - Part 11 : equipment protection by intrinsic safety "i" |
| 303 | AFNOR NF EN ISO 22475-1-2007 | 2007-03-01 | French | Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1 : technical principles for execution |
| 304 | AFNOR NF EN ISO 22674-2007 | 2007-03-01 | French | Dentistry - Metallic materials for fixed and removable restorations and appliances |
| 305 | AFNOR NF EN 60947-4-3/A1-2007 | 2007-03-01 | French | Low-voltage switchgear and controlgear - Part 4-3 : contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| 306 | AFNOR NF ISO 20966-2007 | 2007-03-01 | French | Automatic milking installations - Requirements and testing |
| 307 | AFNOR NF EN ISO 14505-2-2007 | 2007-03-01 | French | Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2 : determination of equivalent temperature |
| 308 | AFNOR NF ISO 17874-5-2007 | 2007-03-01 | French | Remote handling devices for radioactive materials - Part 5 : remote handling tongs |
| 309 | AFNOR BP X35-073-2007 | 2007-03-01 | French | Consideration of accessibility - Information |
| 310 | AFNOR NF EN ISO 8501-4-2007 | 2007-03-01 | French | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4 : initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting |
| 311 | AFNOR NF EN 927-3-2007 | 2007-03-01 | French | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3 : natural weathering test |
| 312 | AFNOR NF ISO 839-1-2007 | 2007-03-01 | French | Milling machine arbors with 7/24 tapers - Part 1 : dimensions and designation |
| 313 | AFNOR NF EN 2349-407-2007 | 2007-03-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 407 : cold/low pressure and moist heat |
| 314 | AFNOR NF EN ISO 10942-2007 | 2007-03-01 | French | Ophthalmic instruments - Direct ophthalmoscopes |
| 315 | AFNOR NF ISO 5707-2007 | 2007-03-01 | French | Milking machine installations - Construction and performance |
| 316 | AFNOR NF EN 469/A1-2007 | 2007-03-01 | French | Protective clothing for firefighters - Performance requirements for protective clothing for firefighting |
| 317 | AFNOR XP P45-500-2007 | 2007-03-01 | French | Gas installation located inside residential buildings - Condition of interior gas installations - Diagnosis - Modified by XP P45-500/A1:200710 (P45-500/A1) |
| 318 | AFNOR CWA 15672-2007 | 2007-03-01 | French | Business requirements specification - Cross industry despatch and receive process |
| 319 | AFNOR NF EN 61755-3-5-2007 | 2007-03-01 | French | Fibre optic connector optical interfaces - Part 3-5 : optical Interface - 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| 320 | AFNOR NF EN 15202-2007 | 2007-03-01 | French | LPG Equipment and accessories - Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections |
| 321 | AFNOR NF EN ISO 7500-2-2007 | 2007-03-01 | French | Metallic materials - Verification of static uniaxial testing machines - Part 2 : tension creep testing machines - Verification of the applied force |
| 322 | AFNOR NF EN 61033-2007 | 2007-03-01 | French | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
| 323 | AFNOR CWA 15669-4-2007 | 2007-03-01 | French | Business requirements specification - Cross industry ordering process - Part 4 : order response transaction |
| 324 | AFNOR CWA 15669-3-2007 | 2007-03-01 | French | Business requirements specification - Cross industry ordering process - Part 3 : order change transaction |
| 325 | AFNOR CWA 15669-2-2007 | 2007-03-01 | French | Business requirements specification - Cross industry ordering process - Part 2 : order transaction |
| 326 | AFNOR CWA 15669-1-2007 | 2007-03-01 | French | Business requirements specification - Cross industry ordering process - Part 1 : global ordering process model definition |
| 327 | AFNOR NF EN ISO 5659-2-2007 | 2007-03-01 | French | Plastics - Smoke generation - Part 2 : determination of optical density by a single chamber test |
| 328 | AFNOR NF EN ISO 5667-1-2007 | 2007-03-01 | French | Water quality - Sampling - Part 1 : guidance on the design of sampling programmes and sampling techniques |
| 329 | AFNOR NF EN 61314-1-1-2007 | 2007-03-01 | French | Fibre optic fan-outs - Part 1-1 : blank detail specification |
| 330 | AFNOR NF EN 61755-3-6-2007 | 2007-03-01 | French | Fibre optic connector optical interfaces - Part 3-6 : optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre |
| 331 | AFNOR NF ISO 5550-2007 | 2007-03-01 | French | Caseins and caseinates - Determination of moisture content - (Reference method) |
| 332 | AFNOR NF EN 61753-101-2-2007 | 2007-03-01 | French | Fibre optic interconnecting devices and passive components - Performance standard - Part 101-2 : fibre management systems for category C - Controlled environment |
| 333 | AFNOR NF EN 15206-2007 | 2007-03-01 | French | Vitreous and porcelain enamels - Production of specimens for testing enamel on sheet steel, sheet aluminium and cast iron |
| 334 | AFNOR CWA 15666-2007 | 2007-03-01 | French | Business requirements specification - Cross industry e-Tendering process |
| 335 | AFNOR CWA 15667-2007 | 2007-03-01 | French | Business requirements specification - Cross industry catalogue process |
| 336 | AFNOR NF EN 1993-2-2007 | 2007-03-01 | French | Eurocode 3 - Design of steel structures - Part 2 : steel bridges |
| 337 | AFNOR NF EN 1993-3-1-2007 | 2007-03-01 | French | Eurocode 3 - Design of steel structures - Part 3-1 : towers, masts and chimneys - Towers and masts |
| 338 | AFNOR NF EN ISO 10943-2007 | 2007-03-01 | French | Ophthalmic instruments - Indirect ophthalmoscopes |
| 339 | AFNOR NF ISO 5658-2-2007 | 2007-03-01 | French | Reaction to fire tests - Spread of flame - Part 2 : lateral spread on building and transport products in vertical configuration |
| 340 | AFNOR CWA 15668-2007 | 2007-03-01 | French | Business requirements specification - Cross industry invoicing process |
| 341 | AFNOR NF C17-200-2007 | 2007-03-01 | French | External lighting installations - Requirements - Modified by NF C17-200 F1:200806 (C17-200F1),NF C17-200 F2:200806 (C17-200F2),NF C17-200 F3:200906 (C17-200F3),NF C17-200 F4:200906 (C17-200F4),NF C17-200 F5:200906 (C17-200F5),NF C17-200 F6:201007 (C17-200F6),NF C17-200 F7:201007 (C17-200F7),NF C17-200 F8:201007 (C17-200F8) |
| 342 | AFNOR NF L17-103-2007 | 2007-03-01 | French | Aerospace series - Rubbers - Non fitted product - Packaging and storage conditions |
| 343 | AFNOR XP DTU 64.1 P1-2-2007 | 2007-03-01 | French | Installation of private (independent) sewerage systems - Private duvelling houses comprising up to 10 rooms - Part 1-2 : general criteria for selecting materials |
| 344 | AFNOR NF EN 60034-5/A1-2007 | 2007-03-01 | French | Rotating electrical machines - Part 5 : degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification |
| 345 | AFNOR NF EN 1993-1-5-2007 | 2007-03-01 | French | Eurocode 3 - Design of steel structures - Part 1-5 : plated structural elements |
| 346 | AFNOR XP DTU 64.1 P1-1-2007 | 2007-03-01 | French | Installation of private (independent) sewerage systems - Private duvelling houses comprising up to 10 rooms - Part 1-1 : contract dill of technical requirements |
| 347 | AFNOR NF EN 1993-1-3-2007 | 2007-03-01 | French | Eurocode 3 - Design of steel structures - Part 1-3 : general rules - Supplementary rules for cold-formed members and sheeting |
| 348 | AFNOR NF EN 50131-1-2007 | 2007-03-01 | French | Alarm systems - Intrusion and hold-up systems - Part 1 : system requirements - Modified by NF EN 50131-1/A1:201001 (C48-331-1/A1) |
| 349 | AFNOR XP DTU 64.1-2007 | 2007-03-01 | French | Installation of private (independent) sewerage systems - Private duvelling houses comprising up to 10 rooms - Part 1-1 : contract dill of technical requirements - Part 1-2 : general criteria for selecting materials |
| 350 | AFNOR XP S31-145-1-2007 | 2007-03-01 | French | Acoustics - In-situ characterisation of the sound performances of road surfacings - Continuous measurements of the noise generated by type/roadway - Part 1 : expertise measurement |
| 351 | AFNOR NF EN 14932-2007 | 2007-03-01 | French | Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods |
| 352 | AFNOR CWA 15671-2007 | 2007-03-01 | French | Business requirements specification - Cross industry scheduling process |
| 353 | AFNOR NF EN 1992-1-1/NA-2007 | 2007-03-01 | French | Eurocode 2 : design of concrete structures - Part 1-1 : general rules and rules for buildings - National annex to NF EN 1992-1-1:2005 - General rules and rules for buildings |
| 354 | AFNOR NF EN ISO 1874-2-2007 | 2007-03-01 | French | Plastics - Polyamide (PA) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties |
| 355 | AFNOR NF EN 1544-2007 | 2007-03-01 | French | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep under sustained tensile load for synthetic resin products (PC) for the anchoring of reinforcing bars |
| 356 | AFNOR NF ISO 3918-2007 | 2007-03-01 | French | Milking machine installations - Vocabulary |
| 357 | AFNOR NF ISO 18652-2007 | 2007-03-01 | French | Building construction machinery and equipment - External vibrators for concrete |
| 358 | AFNOR CWA 15670-2007 | 2007-03-01 | French | Business requirements specification - Cross industry remittance advice process |
| 359 | AFNOR NF C01-351-2007 | 2007-03-01 | French | International electrotechnical vocabulary - Part 351 : control technology |
| 360 | AFNOR NF EN 13984/A1-2007 | 2007-03-01 | French | Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics |
| 361 | AFNOR NF EN 1364-3-2007 | 2007-03-01 | French | Fire resistance tests for non-loadbearing elements - Part 3 : curtain walling - Full configuration (complete assembly) |
| 362 | AFNOR NF EN 13970/A1-2007 | 2007-03-01 | French | Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics |
| 363 | AFNOR NF EN 13969/A1-2007 | 2007-03-01 | French | Flexible sheetes for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics |
| 364 | AFNOR NF EN 13967/A1-2007 | 2007-03-01 | French | Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics |
| 365 | AFNOR NF EN 13480-3/A2-2007 | 2007-03-01 | French | Metallic industrial piping - Part 3 : design and calculation |
| 366 | AFNOR NF EN 61788-1-2007 | 2007-03-01 | French | Superconductivity - Part 1 : critical current measurement - DC critical current of Nb-Ti composite superconductors |
| 367 | AFNOR NF ISO 18696-2007 | 2007-02-01 | French | Textiles - Determination of resistance of water absorption - Tumble-jar absorption test |
| 368 | AFNOR NF ISO 15113-2007 | 2007-02-01 | French | Rubber - Determination of frictional properties |
| 369 | AFNOR CWA 15660-2007 | 2007-02-01 | French | Providing good practice for E-Learning quality approaches |
| 370 | AFNOR CWA 15661-2007 | 2007-02-01 | French | Providing E-learning supplies transparency profiles |
| 371 | AFNOR XP P98-582-2007 | 2007-02-01 | French | Road equipement - Temporary signing of guiding traffic - Plastic markerposts : characteritics, performances and test methods |
| 372 | AFNOR NF EN 61076-3-106-2007 | 2007-02-01 | French | Connectors for electronic equipment - Product requirements - Part 3-106 : rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface |
| 373 | AFNOR NF EN 62076-2007 | 2007-02-01 | French | Industrial electroheating installations - Test methods for induction channel and induction crucible furnaces |
| 374 | AFNOR NF ISO 22779-2007 | 2007-02-01 | French | Metallic coatings - Physical vapour-deposited coatings of aluminium - Specification and test methods |
| 375 | AFNOR NF EN 62308-2007 | 2007-02-01 | French | Equipment reliability - Reliability assessment methods |
| 376 | AFNOR NF EN 15199-2-2007 | 2007-02-01 | French | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2 : heavy distillates and residual fuels |
| 377 | AFNOR NF ISO 8061/A1-2007 | 2007-02-01 | French | Alpine ski-bindings - Selection of release torque values |
| 378 | AFNOR NF EN 13108-1-2007 | 2007-02-01 | French | Bituminous mixtures - Material specifications - Part 1 : asphalt concrete |
| 379 | AFNOR NF EN 13235-2007 | 2007-02-01 | French | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
| 380 | AFNOR NF EN 60904-1-2007 | 2007-02-01 | French | Photovoltaic devices - Part 1 : measurement of photovoltaic current-voltage characteristics |
| 381 | AFNOR NF EN 13307-1-2007 | 2007-02-01 | French | Timber blanks and semi-finished profiles for non-structural uses - Part 1 : requirements |
| 382 | AFNOR NF L06-834-2007 | 2007-02-01 | French | Aerospace series - Metallic parts - Inducement compressive surface stresses - Tungsten carbide spherical beads |
| 383 | AFNOR NF EN 61326-2-4-2007 | 2007-02-01 | French | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4 : particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9 |
| 384 | AFNOR NF EN 13981-4-2007 | 2007-02-01 | French | Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 4 : forgings |
| 385 | AFNOR NF EN 60898-2-2007 | 2007-02-01 | French | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 2 : circuit-breakers for a.c. and d.c. operation |
| 386 | AFNOR NF EN 1993-1-4-2007 | 2007-02-01 | French | Eurocode 3 : design of steel structures - Part 1-4 : general rules - Supplementary rules for stainless steels |
| 387 | AFNOR NF EN 61755-2-2-2007 | 2007-02-01 | French | Fibre optic connector optical interfaces - Part 2-2 : optical interface standard single mode angled physically contacting fibres |
| 388 | AFNOR FD X50-158-2007 | 2007-02-01 | French | Value management - Value management contributions to corporate processes |
| 389 | AFNOR NF EN 60601-2-13-2007 | 2007-02-01 | French | Medical electrical equipment - Part 2-13 : particular requirements for the safety and essential performance of anaesthetic systems - Modified by NF EN 60601-2-13/A1:200709 (C74-345/A1) |
| 390 | AFNOR NF ISO 22778-2007 | 2007-02-01 | French | Metallic coatings - Physical vapour-deposited coatings of cadmium on iron and steel - Specification and test methods |
| 391 | AFNOR NF L06-835-2007 | 2007-02-01 | French | Aerospace series - Metallic parts - Inducement compressive surface stresses - Steel shot cut wire (spherical) |
| 392 | AFNOR NF EN ISO 20566-2007 | 2007-02-01 | French | Paints and varnishes - Determination of the scratch resistance of a coating system using a laboratory car-wash |
| 393 | AFNOR NF EN 455-3-2007 | 2007-02-01 | French | Medical gloves for single use - Part 3 : requirements and testing for biological evaluation |
| 394 | AFNOR NF EN ISO 14880-2-2007 | 2007-02-01 | French | Optics and photonics - Microlens arrays - Part 2 : test methods for wavefront aberrations |
| 395 | AFNOR FD DTU 43.6 P3-2007 | 2007-02-01 | French | Building works - Damp-proofing of interior masonry floors with bitumen products - Part 3 : guide intended for the contracting authority |
| 396 | AFNOR NF S97-555-2007 | 2007-02-01 | French | Health informatics - Rules enabling a consistency check between different identifies of the pharmaceutical specialities and/or their presentations during information interchange between different systems |
| 397 | AFNOR NF EN 60870-5-104-2007 | 2007-02-01 | French | Telecontrol equipment and systems - Part 5-104 : transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles |
| 398 | AFNOR NF EN 60601-2-12-2007 | 2007-02-01 | French | Medical electrical equipment - Part 2-12 : particular requirements for the safety of lung ventilators - Critical care ventilators |
| 399 | AFNOR NF EN ISO 14555-2007 | 2007-02-01 | French | Welding - Arc stud welding of metallic materials |
| 400 | AFNOR NF EN 50397-1-2007 | 2007-02-01 | French | Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV a.c. and not exceeding 36 kV a.c. - Part 1 : covered conductors |
| 401 | AFNOR XP X41-590-2007 | 2007-02-01 | French | Wood preservatives - Fixation time assessment |
| 402 | AFNOR NF EN 14969-2007 | 2007-02-01 | French | Railway applications - Track - Qualification system for railway trackwork contractors |
| 403 | AFNOR NF EN ISO 13849-1-2007 | 2007-02-01 | French | Safety of machinery - Safety related parts of control systems - Part 1 : general principles for design |
| 404 | AFNOR NF EN 2349-304-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 304 : operate and release time |
| 405 | AFNOR NF EN 2349-303-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 303 : dielectric strength |
| 406 | AFNOR NF EN 50470-1-2007 | 2007-02-01 | French | Electricity metering equipment (a.c.) - Part 1 : general requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| 407 | AFNOR XP T47-752-2007 | 2007-02-01 | French | End of Life Tyres (ELF) - Determination of the particle size analysis of granulates issued from End of Life Tyres - Method based on the mechanical sieving of product |
| 408 | AFNOR NF EN 15161-2007 | 2007-02-01 | French | Water conditioning equipment inside buildings - Installation, operation, maintenance and repair |
| 409 | AFNOR NF EN 2349-301-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 301 : pick-up and drop-out voltage |
| 410 | AFNOR FD CEN/TR 15321-2007 | 2007-02-01 | French | Guidelines on the selection, use, care and maintenance of protective clothing |
| 411 | AFNOR NF B51-126-2007 | 2007-02-01 | French | Wood-based panels - Brinell hardness test |
| 412 | AFNOR NF EN 60335-2-2/A2-2007 | 2007-02-01 | French | Household and similar electrical appliances - Safety - Part 2-2 : particular requirements for vacuum cleaners and water-suction cleaning appliances |
| 413 | AFNOR UTE C71-806-2007 | 2007-02-01 | French | Applicable rules for NiMh batteries use into the self contained luminaire for emergency escape route lighting |
| 414 | AFNOR NF EN 2349-201-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 201 : visual inspection |
| 415 | AFNOR NF EN 50470-2-2007 | 2007-02-01 | French | Electricity metering equipment (a.c.) - Part 2 : particular requirements - Electromechanical meters for active energy (class indexes A and B) |
| 416 | AFNOR NF EN 50470-3-2007 | 2007-02-01 | French | Electricity metering equipment (a.c.) - Part 3 : particular requirements - Static meters for active energy (class indexes A, B and C) |
| 417 | AFNOR NF ISO 11088-2007 | 2007-02-01 | French | Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system |
| 418 | AFNOR NF A36-800-2-2007 | 2007-02-01 | French | Hot-rolled weldable steel sheets for armouring - Part 2 : firing tests method |
| 419 | AFNOR NF EN 62034-2007 | 2007-02-01 | French | Automatic test system for battery powered emergency escape lighting |
| 420 | AFNOR NF EN 2349-202-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 202 : examination of dimensions and mass |
| 421 | AFNOR XP CEN/TS 15022-4-2007 | 2007-02-01 | French | Copper and copper alloys - Determination of tin content - Part 4 : medium tin content - Flame atomic absorption spectrometry method (FAAS) |
| 422 | AFNOR NF EN 2349-302-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 302 : insulation resistance |
| 423 | AFNOR NF EN 15168-2007 | 2007-02-01 | French | Surface active agents - Determination of hydroxyl value - p-toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide |
| 424 | AFNOR XP CEN/TS 15087-2007 | 2007-02-01 | French | Determination of the uplift resistance of installed clay and concrete interlocking tiles for roofing - Test method for mechanical fasteners |
| 425 | AFNOR NF EN 61290-1-1-2007 | 2007-02-01 | French | Optical amplifiers - Test methods - Part 1-1 : power and gain parameters - Optical spectrum analyzer method |
| 426 | AFNOR XP CEN/TS 15280-2007 | 2007-02-01 | French | Evaluation of a.c. corrosion likelihood of buried pipelines - Application to cathodically protected pipelines |
| 427 | AFNOR NF EN 2349-307-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 307 : contact voltage drop |
| 428 | AFNOR NF EN 60598-1/A1-2007 | 2007-02-01 | French | Luminaires - Part 1 : general requirements and tests |
| 429 | AFNOR NF D65-760-2-2007 | 2007-02-01 | French | Professionnal furniture - Lockers - Part 2 : safety requirements |
| 430 | AFNOR NF EN 14995-2007 | 2007-02-01 | French | Plastics - Evaluation of compostability - Test scheme and Specifications |
| 431 | AFNOR NF EN 517-2007 | 2007-02-01 | French | Prefabricated accessories for roofing - Roof safety hooks |
| 432 | AFNOR NF EN 61291-1-2007 | 2007-02-01 | French | Optical amplifiers - Part 1 : generic specification |
| 433 | AFNOR NF D65-760-1-2007 | 2007-02-01 | French | Professionnal furniture - Lockers - Part 1 : dimensions |
| 434 | AFNOR NF EN 50116-2007 | 2007-02-01 | French | Information technology equipment - Routine electrical safety testing in production |
| 435 | AFNOR NF EN 2349-306-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 306 : overload d.c. and a.c. |
| 436 | AFNOR NF EN ISO 11890-2-2007 | 2007-02-01 | French | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2 : gas-chromatographic method |
| 437 | AFNOR NF EN 13234-2007 | 2007-02-01 | French | Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing |
| 438 | AFNOR NF EN 30-1-4/A1-2007 | 2007-02-01 | French | Domestic cooking appliances burning gas - Part 1-4 : safety - Appliances having one or more burners with an automatic burner control system |
| 439 | AFNOR NF D65-760-3-2007 | 2007-02-01 | French | Professionnal furniture - Lockers - Part 3 : test methods |
| 440 | AFNOR NF EN 50117-1/A1-2007 | 2007-02-01 | French | Coaxial cables - Part 1 : generic specification |
| 441 | AFNOR NF EN 2349-305-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 305 : bounce time |
| 442 | AFNOR NF EN 15189-2007 | 2007-02-01 | French | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| 443 | AFNOR NF ISO 8587-2007 | 2007-02-01 | French | Sensory analysis - Methodology - Ranking |
| 444 | AFNOR NF EN 62271-109-2007 | 2007-02-01 | French | High-voltage switchgear and controlgear - Part 109 : alternating-current series capacitor by-pass switches |
| 445 | AFNOR XP ISO/TS 16733-2007 | 2007-02-01 | French | Fire safety engineering - Selection of design fire scenarios and design fires |
| 446 | AFNOR FD CEN/TR 15508-2007 | 2007-02-01 | French | Key properties of solid recovered fuels to be used for establishing a classification system |
| 447 | AFNOR XP T51-805-2007 | 2007-02-01 | French | Plastics - Verification of the performances of infrared spectrophotometers |
| 448 | AFNOR NF EN ISO 24013-2007 | 2007-02-01 | French | Optics and photonics - Lasers and laser- related equipment - Measurement of phase retardation of optical components for polarized laser radiation |
| 449 | AFNOR NF EN 14630-2007 | 2007-02-01 | French | Products and systems for the protection and repair of concrete structures - Test methods - Determination of carbonation depth in hardened concrete by the phenolphthalein method |
| 450 | AFNOR NF EN ISO 1520-2007 | 2007-02-01 | French | Paints and varnishes - Cupping test |
| 451 | AFNOR NF EN 50214-2007 | 2007-02-01 | French | Flat polyvinyl chloride sheathed flexible cables |
| 452 | AFNOR NF EN 60947-4-2/A2-2007 | 2007-02-01 | French | Low-voltage switchgear and controlgear - Part 4-2 : contactors and motor-starters - AC semiconductor motor controllers and starters |
| 453 | AFNOR NF EN 15238-2007 | 2007-02-01 | French | Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm |
| 454 | AFNOR NF EN 1991-1-7-2007 | 2007-02-01 | French | Eurocode 1 : Actions on structures - Part 1-7 : general actions - Accidental actions |
| 455 | AFNOR NF EN 2349-308-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 308 : coil current |
| 456 | AFNOR FD ISO/TR 27628-2007 | 2007-02-01 | French | Workplace atmospheres - Ultrafine, nanoparticle and nano-structured aerosols - Inhalation exposure characterization and assessment |
| 457 | AFNOR NF EN 2349-309-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 309 : exported spikes |
| 458 | AFNOR NF S31-133-2007 | 2007-02-01 | French | Acoustic - Road and railway traffic noise - Calculation of sound attenuation during outdoor propagation, including meteorological effects |
| 459 | AFNOR NF EN ISO 21182-2007 | 2007-02-01 | French | Light conveyor belts - Determination of the coefficient of friction |
| 460 | AFNOR XP ISO/TS 26844-2007 | 2007-02-01 | French | Milk and milk products - Determination of antimicrobial residues - Tube diffusion test |
| 461 | AFNOR NF EN ISO 1805-2007 | 2007-02-01 | French | Fishing nets - Determination of breaking force and knot breaking force of netting yarns |
| 462 | AFNOR NF EN 1991-1-2/NA-2007 | 2007-02-01 | French | Eurocode 1 - Actions on structures - Part 1-2 : general actions - Actions on structures exposed to fire - National annex to NF EN 1991-1-2 - Actions on structures exposed to fire |
| 463 | AFNOR NF EN 61347-2-7-2007 | 2007-02-01 | French | Lamp controlgear - Part 2-7 : particular requirements for d.c. supplied electronic ballasts for emergency lighting |
| 464 | AFNOR BP X50-883-2007 | 2007-02-01 | French | Comprehensive coaching in corporate management - Organisation and missions of Management and accounting Associations |
| 465 | AFNOR NF ISO 13041-5-2007 | 2007-02-01 | French | Test conditions for numerically controlled turning machines and turning centres - Part 5 : accuracy of feeds, speeds and interpolations |
| 466 | AFNOR XP P16-001-2007 | 2007-02-01 | French | Management and control of non domestic discharge collection operations in drainage and sewer systems |
| 467 | AFNOR NF EN 14885-2007 | 2007-02-01 | French | Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics |
| 468 | AFNOR NF EN ISO 10426-1-2007 | 2007-02-01 | French | Petroleum and natural gas industries - Cements and materials for well cementing - Part 1 : specification |
| 469 | AFNOR NF EN ISO 9453-2007 | 2007-02-01 | French | Soft solder alloys - Chemical compositions and forms |
| 470 | AFNOR NF EN ISO 3166-1-2007 | 2007-02-01 | French | Codes for the representation of names of countries and their subdivision - Part 1 : country codes |
| 471 | AFNOR NF EN 15109-2007 | 2007-02-01 | French | Surface active agents - Determination of the active matter content of alkylamidopropylbetaines |
| 472 | AFNOR NF P03-310-2007 | 2007-02-01 | French | Thermal analysis and energy balances for new housing - Quality and service associated with the conducting of thermal analyses and energy balances for appartment buildings and private houses |
| 473 | AFNOR BP Z74-700-2007 | 2007-02-01 | French | Business continuiy plan (BCP) |
| 474 | AFNOR NF EN 50270-2007 | 2007-02-01 | French | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
| 475 | AFNOR NF ISO 13216-3-2007 | 2007-02-01 | French | Road vehicles - Anchorages in vehicles and attachments to anchorages for child restraint systems - Part 3 : classification of child restraint dimensions and space in vehicle |
| 476 | AFNOR NF EN 2349-310-2007 | 2007-02-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 310 : rupture |
| 477 | AFNOR NF EN 61204-7-2007 | 2007-02-01 | French | Low voltage power supplies, d.c. output - Part 7 : safety requirements - Modified by NF EN 61204-7/A11:201001 (C53-204-7/A11) |
| 478 | AFNOR NF EN 15097-2007 | 2007-01-01 | French | Irrigation techniques - Localised irrigation - Hydraulic evaluation |
| 479 | AFNOR NF P16-451-1/CN-2007 | 2007-01-01 | French | Separator systems for light liquids (for example, oil and petrol) - Part 1/CN : principles of product design, performance and testing, marking and quality control - National addition to NF EN 858-1 |
| 480 | AFNOR NF ISO 13215-1-2007 | 2007-01-01 | French | Road vehicles - Reduction of misuse risk of child restraint systems - Part 1 : forms for field studies |
| 481 | AFNOR NF EN ISO 17070-2007 | 2007-01-01 | French | Leather - Chemical tests - Determination of pentachlorophenol content |
| 482 | AFNOR XP T47-806-2007 | 2007-01-01 | French | Rubber bearing devices - Determination of creep under compression |
| 483 | AFNOR NF ISO 5006-2007 | 2007-01-01 | French | Earth-moving machinery - Operator's field of view - Test method and performance criteria |
| 484 | AFNOR NF EN 2859-2007 | 2007-01-01 | French | Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification : 1 100 MPa (at ambient temperature)/235掳C |
| 485 | AFNOR NF EN ISO 14509-2-2007 | 2007-01-01 | French | Small craft - Airborne sound emitted by powered recreational craft - Part 2 : sound assessment using reference craft |
| 486 | AFNOR NF EN ISO 17294-1-2007 | 2007-01-01 | French | Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1 : general guidelines |
| 487 | AFNOR XP CEN/TS 12666-2-2007 | 2007-01-01 | French | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 2 : guidance for the assessment of conformity |
| 488 | AFNOR NF EN 14476/IN1-2007 | 2007-01-01 | French | Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) |
| 489 | AFNOR NF EN ISO 21183-1-2007 | 2007-01-01 | French | Light conveyor belts - Part 1 : principal characteristics and applications |
| 490 | AFNOR NF EN ISO 16708-2007 | 2007-01-01 | French | Petroleum and natural gas industries - Pipeline transportation systems - Reliability-based limit state methods |
| 491 | AFNOR XP T47-813-2007 | 2007-01-01 | French | Rubber bearing devices - Salt spray resistance determination |
| 492 | AFNOR NF EN 60076-13-2007 | 2007-01-01 | French | Power transformers - Part 13 : self-protected liquid-filled transformers |
| 493 | AFNOR NF EN 15010-2007 | 2007-01-01 | French | Aerosol containers - Aluminium containers - Tolerances of the fundamental dimensions in connection with the clinch |
| 494 | AFNOR NF P16-500-1/CN-2007 | 2007-01-01 | French | Grease separators - Part 1/CN : principles of design, performance and testing, marking and quality control - National addition to NF EN 1825-1 |
| 495 | AFNOR NF EN 14476+A1-2007 | 2007-01-01 | French | Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) |
| 496 | AFNOR NF EN 14475-2007 | 2007-01-01 | French | Execution of special geotechnical works - Reinforced fill |
| 497 | AFNOR NF EN 61163-1-2007 | 2007-01-01 | French | Reliability stress screening - Part 1 : repairable assemblies manufactured in lots |
| 498 | AFNOR NF EN ISO 21181-2007 | 2007-01-01 | French | Light conveyor belts - Determination of the relaxed elastic modulus |
| 499 | AFNOR NF EN ISO 21180-2007 | 2007-01-01 | French | Light conveyor belts - Determination of the maximum tensile strength |
| 500 | AFNOR XP T47-811-2007 | 2007-01-01 | French | Rubber bearing devices - Determination of the non-sliding condition |
|