| Pos | standard Number | publication date | Language | Description |
| 1 | AFNOR NF EN 3525-2007 | 2007-09-01 | French | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a < or = 20 mm - 1 080 MPa < or = Rm < or = 1 280 MPa |
| 2 | AFNOR NF EN 2947-2007 | 2007-09-01 | French | Aerospace series - Steel FE-PA3004 (X10CrNi18-09) - Air melted - Non heat treated - Cold drawn wire - a or D < or = 2,3 mm |
| 3 | AFNOR NF EN 12697-33/IN1-2007 | 2007-09-01 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 33 : specimen prepared by roller compactor |
| 4 | AFNOR NF EN 3668-2007 | 2007-09-01 | French | Aerospace series - Heat resisting alloy NI-PH2301 (NiCr21Fe18Mo9) - Non heat treated - Forging stock - a or D < or = 250 mm |
| 5 | AFNOR NF EN 15458-2007 | 2007-09-01 | French | Paints and varnishes - Laboratory method for testing the efficacy of film preservatives in a coating against algae |
| 6 | AFNOR NF V01-009-2007 | 2007-09-01 | French | Hygiene and safety of foodstuffs - Guidelines for the implementation of microbiological challenge tests |
| 7 | AFNOR NF EN ISO 7214-2007 | 2007-09-01 | French | Cellular plastics - Polyethylene - Methods of test |
| 8 | AFNOR NF ISO 4000-2-2007 | 2007-09-01 | French | Passenger car tyres and rims - Part 2 : rims |
| 9 | AFNOR NF EN 60335-2-24/A2-2007 | 2007-09-01 | French | Household and similar electrical appliances - Safety - Part 2-24 : particular requirements for refrigerating appliances, ice-cream appliances and ice-makers |
| 10 | AFNOR NF EN 12697-2+A1-2007 | 2007-09-01 | French | Bituminous mixtures - Test method for hot mix asphalt - Part 2 : Determination of particle size distribution |
| 11 | AFNOR NF EN 62464-1-2007 | 2007-09-01 | French | Magnetic resonance equipment for medical imaging - Part 1 : determination of essential image quality parameters |
| 12 | AFNOR NF E71-016-2007 | 2007-09-01 | French | Hammers with steel heads - Dimensions |
| 13 | AFNOR NF EN 13977/IN1-2007 | 2007-09-01 | French | Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance |
| 14 | AFNOR NF DTU 57.1 P2-2007 | 2007-09-01 | French | Raised access floor (free access) - Constituent components - Execution - Part 2 : contract bill of special clauses |
| 15 | AFNOR FD CEN/TR 15473-2007 | 2007-09-01 | French | Characterisation of sludges - Good practice for sludges drying |
| 16 | AFNOR NF EN 14878-2007 | 2007-09-01 | French | Textiles - Burning behaviour of children's nightwear - Specification |
| 17 | AFNOR NF EN 12697-22+A1-2007 | 2007-09-01 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 22 : wheel tracking |
| 18 | AFNOR NF EN 1506-2007 | 2007-09-01 | French | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| 19 | AFNOR NF EN 60904-2-2007 | 2007-09-01 | French | Photovoltaic devices - Part 2 : requirements for reference solar devices |
| 20 | AFNOR NF EN 4165-005-2007 | 2007-09-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 掳C continuous - Part 005 : stackable mouting receptacle 2 and 4 modules, series 3 - Product standard |
| 21 | AFNOR NF EN 15509-2007 | 2007-09-01 | French | Road transport and traffic telematics - Electronic fee collection - Interoperability application profile for DSRC |
| 22 | AFNOR NF EN 843-5-2007 | 2007-09-01 | French | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5 : statistical analysis |
| 23 | AFNOR NF EN 71-9+A1-2007 | 2007-09-01 | French | Safety of toys - Part 9 : organic chemical compounds - Requirements |
| 24 | AFNOR NF H35-078-2007 | 2007-09-01 | French | Bottling industry - Glass bottles - Containers for carbonated beverages - Mechanical strength requirements |
| 25 | AFNOR NF ISO 8013-2007 | 2007-09-01 | French | Rubber, vulcanized - Determination of creep in compression or shear |
| 26 | AFNOR NF EN ISO 15875-2/A1-2007 | 2007-09-01 | French | Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2 : pipes |
| 27 | AFNOR NF EN 60027-1/A2-2007 | 2007-09-01 | French | Letter symbols to be used in electrical technology - Part 1 : general |
| 28 | AFNOR NF EN 60068-2-1-2007 | 2007-08-01 | French | Environmental testing - Part 2-1 : tests - Tests A : cold |
| 29 | AFNOR NF EN 61300-3-14-2007 | 2007-08-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14 : examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable attenuator |
| 30 | AFNOR NF EN 15266-2007 | 2007-08-01 | French | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| 31 | AFNOR NF EN 60061-2/A36-2007 | 2007-08-01 | French | Lamp caps and holders together with gauges for the control of intechangeablity and safety - Part 2 : lampholders |
| 32 | AFNOR NF EN 1367-1-2007 | 2007-08-01 | French | Tests for thermal and weathering properties of aggregates - Part 1 : determination of resistance to freezing and thawing |
| 33 | AFNOR NF EN 50085-2-1-2007 | 2007-08-01 | French | Cable trunking systems and cable ducting systems for electrical installations - Part 2-1 : cable trunking systems and cable ducting systems intented for mounting on walls and ceilings |
| 34 | AFNOR NF EN 1395-1-2007 | 2007-08-01 | French | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1 : general requirements |
| 35 | AFNOR NF EN 60745-2-4/A11-2007 | 2007-08-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-4 : particular requirements for sanders and polishers other than disk type |
| 36 | AFNOR NF EN 1395-2-2007 | 2007-08-01 | French | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2 : flame spraying including HVOF |
| 37 | AFNOR NF ISO 23611-3-2007 | 2007-08-01 | French | Soil quality - Sampling of soil invertebrates - Part 3 : sampling and soil extraction of enchytraeids |
| 38 | AFNOR NF EN 61181-2007 | 2007-08-01 | French | Mineral oil-filled electrical equipment - Application of dissolved gas analysis (DGA) to factory tests on electrical equipment |
| 39 | AFNOR NF ISO 23309-2007 | 2007-08-01 | French | Hydraulic fluid power systems - Assembled systems - Methods for cleaning lines by flushing |
| 40 | AFNOR FD E44-190-2007 | 2007-08-01 | French | Pumps and pumps units - Recommendation concerning mounting and installation driving motor and pump and concerning selection of type coupling |
| 41 | AFNOR NF EN 61300-2-37-2007 | 2007-08-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37 : tests - Cable bending for fibre optic closures |
| 42 | AFNOR NF EN 1332-4-2007 | 2007-08-01 | French | Identification card systems - Man-machine interface - Part 4 : coding of user requirements for people with special needs |
| 43 | AFNOR NF EN 60034-28-2007 | 2007-08-01 | French | Rotating electrical machines - Part 28 : test methods for determining quantities of equivalent circuit diagrams for three-phase low-voltage cage induction motors |
| 44 | AFNOR NF EN ISO 10722-2007 | 2007-08-01 | French | Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material |
| 45 | AFNOR NF C01-394-2007 | 2007-08-01 | French | International Electrotechnical Vocabulary - Part 394 : nuclear instrumentation - Instruments |
| 46 | AFNOR NF ISO 7451-2007 | 2007-08-01 | French | Earth-moving machinery - Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders |
| 47 | AFNOR NF EN 60745-2-6/A11-2007 | 2007-08-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-6 : particular requirements for hammers |
| 48 | AFNOR NF EN 1330-11-2007 | 2007-08-01 | French | Non-destructive testing - Terminology - Part 11 : Terms used in X-ray diffraction from polycrystalline and amorphous materials |
| 49 | AFNOR NF EN 13501-4-2007 | 2007-08-01 | French | Fire classification of construction products and building elements - Part 4 : classification using test data from fire resistance tests on smoke control systems |
| 50 | AFNOR NF EN 1395-3-2007 | 2007-08-01 | French | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3 : arc spraying |
| 51 | AFNOR NF EN 1395-4-2007 | 2007-08-01 | French | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 4 : plasma spraying |
| 52 | AFNOR NF EN 60745-2-2/A11-2007 | 2007-08-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-2 : particular requirements for screwdrivers and impact wrenches |
| 53 | AFNOR NF EN 1395-7-2007 | 2007-08-01 | French | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7 : powder feed systems |
| 54 | AFNOR NF EN 60745-2-8/A11-2007 | 2007-08-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-8 : particular requirements for shears and nibblers |
| 55 | AFNOR NF EN 725-3-2007 | 2007-08-01 | French | Advanced technical ceramics - Methods of test for ceramic powders - Part 3 : determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
| 56 | AFNOR NF EN 50464-1-2007 | 2007-08-01 | French | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 1 : general requirements |
| 57 | AFNOR NF EN 50464-2-1-2007 | 2007-08-01 | French | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-1 : distribution transformers with cable boxes on the high-voltage and/or low-voltage side - General requirements |
| 58 | AFNOR NF EN 50464-2-3-2007 | 2007-08-01 | French | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-3 : distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 2 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
| 59 | AFNOR NF EN 60027-1-2007 | 2007-08-01 | French | Letter symbols to be used in electrical technology - Part 1 : general - Modified by NF EN 60027-1/A2:200709 (C03-000/A2) |
| 60 | AFNOR NF EN 60068-3-11-2007 | 2007-08-01 | French | Environmental testing - Part 3-11 : supporting documentation and guidance - Calculation of the uncertainty of conditions in climatic test chambers |
| 61 | AFNOR NF EN 13277-3/A1-2007 | 2007-08-01 | French | Protective equipment for martial arts - Part 3 : additional requirements and test methods for trunk protectors |
| 62 | AFNOR FD Z44-063-2007 | 2007-08-01 | French | Documentation - Cataloguing of continuing resources - Drafting of the bibliographical description |
| 63 | AFNOR NF EN 14276-2-2007 | 2007-08-01 | French | Pressure equipment for refrigerating systems and heat pumps - Part 2 : piping - General requirements |
| 64 | AFNOR NF EN 55016-1-1-2007 | 2007-08-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1 : radio disturbance and immunity measuring apparatus - Measuring apparatus - Modified by NF EN 55016-1-1/A1:200709 (C91-016-1-1/A1),NF EN 55016-1-1/A2:200805 (C91-016-1-1/A2) |
| 65 | AFNOR NF EN 725-5-2007 | 2007-08-01 | French | Advanced technical ceramics - Methods of test for ceramic powders - Part 5 : determination of the particle size distribution |
| 66 | AFNOR NF EN 1993-1-12-2007 | 2007-08-01 | French | Eurocode 3 - Design of steel structures - Part 1-12 : additional rules for the extension of EN 1993 up to steel grades S 700 |
| 67 | AFNOR NF EN 14316-2-2007 | 2007-08-01 | French | Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2 : specification for the installed products |
| 68 | AFNOR NF EN 2713-008-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 200掳 C - Part 008 : screened (braided) and jacketed, UV laser printable - Product standard |
| 69 | AFNOR NF EN ISO 15189-2007 | 2007-08-01 | French | Medical laboratories - Particular requirements for quality and competence |
| 70 | AFNOR NF EN 2713-010-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 200 掳C - Part 010 : screened (braided) and jacketed, YAG X3 laser printable - Product standard |
| 71 | AFNOR NF EN 61730-2-2007 | 2007-08-01 | French | Photovoltaic (PV) module safety qualification - Part 2 : requirements for testing |
| 72 | AFNOR NF EN ISO 15181-2-2007 | 2007-08-01 | French | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 2 : determination of copper-ion concentration in the extract and calculation of the release rate |
| 73 | AFNOR NF EN 2714-006-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 260 掳C - Part 006 : screened (braided) and jacketed, CO2 laser printable - Product standard |
| 74 | AFNOR NF EN ISO 15181-1-2007 | 2007-08-01 | French | Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1 : general method for extraction of biocides |
| 75 | AFNOR NF EN 3733-009-2007 | 2007-08-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 掳C continuous - Part 009 : receptacle sub-assembly for cable to EN 4532 (200 mu/280 mu fibre) - Product standard |
| 76 | AFNOR NF EN ISO 16276-1-2007 | 2007-08-01 | French | Corrosion protection of steel structures by protective paints systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1 : pull-off testing |
| 77 | AFNOR NF EN 62282-3-1-2007 | 2007-08-01 | French | Fuel cell technologies - Part 3-1 : stationary fuel cell power systems - Safety |
| 78 | AFNOR NF EN 2714-008-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 260 掳C - Part 008 : screened (braided) and jacketed, UV laser printable - Product standard |
| 79 | AFNOR NF EN 61223-2-6-2007 | 2007-08-01 | French | Evaluation and routine testing medical imaging departments - Part 2-6 : constancy tests - Imaging performance of computed tomography X-ray equipment |
| 80 | AFNOR NF EN 60599/A1-2007 | 2007-08-01 | French | Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis |
| 81 | AFNOR NF EN ISO 20567-2-2007 | 2007-08-01 | French | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2 : single-impact test with a guided impact body |
| 82 | AFNOR NF EN 2714-010-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 260 掳C - Part 010 : screened (braided) and jacketed, YAG X3 laser printable - Product standard |
| 83 | AFNOR XP C16-600-2007 | 2007-08-01 | French | Status of electrical installations of residential buildings |
| 84 | AFNOR NF EN 60670-21-2007 | 2007-08-01 | French | Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21 : particular requirements for boxes and enclosures with provision for suspension means |
| 85 | AFNOR NF EN 2997-008-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 008 : plug - Product standard |
| 86 | AFNOR NF EN 2997-007-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 007 : hermetic receptacle with round flange attached by welding or brazing - Product standard |
| 87 | AFNOR NF EN 2997-005-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 005 : hermetic square flange receptacle - Product standard |
| 88 | AFNOR NF EN 2997-003-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 003 : square flange receptacle - Product standard |
| 89 | AFNOR NF EN 2997-001-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 001 : technical specification |
| 90 | AFNOR NF EN 4004-2007 | 2007-08-01 | French | Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0,4 mm < or = a < or = 6 mm |
| 91 | AFNOR NF EN 2821-2007 | 2007-08-01 | French | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D inf茅rior or equal to 200 mm - Rm sup茅rior or equal to 1 310 Mpa |
| 92 | AFNOR NF EN 61300-3-15-2007 | 2007-08-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15 : examinations and measurements - Dome eccentricity of a convex polished ferrule endface |
| 93 | AFNOR NF EN 15373-2007 | 2007-08-01 | French | Furniture - Strenght, durability and safety - Requirements for non-domestic seating |
| 94 | AFNOR NF EN 3660-001-2007 | 2007-08-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001 : technical specification |
| 95 | AFNOR NF EN 13277-4/A1-2007 | 2007-08-01 | French | Protective equipment for martial arts - Part 4 : additional requirements and test methods for head protectors |
| 96 | AFNOR XP R18-804-2007 | 2007-08-01 | French | Road vehicles - Up to 8-seater vehicles intended for the transport of at least one person with impaired mobility - STHANDY/HACCESS |
| 97 | AFNOR NF X30-420-2007 | 2007-08-01 | French | Waste - Determination of the permeability of a permanent geological formation of added or artificially reconstituted materials - Closed-type, single ring infiltrometers - Constant load and variable load test |
| 98 | AFNOR NF EN 60079-26-2007 | 2007-08-01 | French | Explosive atmospheres - Part 26 : equipment with equipment protection level (EPL) Ga |
| 99 | AFNOR NF EN ISO 9073-14-2007 | 2007-08-01 | French | Textiles - Test methods for nonwovens - Part 14 : coverstock wetback |
| 100 | AFNOR NF EN 50464-2-2-2007 | 2007-08-01 | French | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 2-2 : distribution transformers with cable boxes on the high-voltage and/or low-voltage side - Cable boxes type 1 for use on distribution transformers meeting the requirements of EN 50464-2-1 |
| 101 | AFNOR NF EN ISO 21606-2007 | 2007-08-01 | French | Dentistry - Elastomeric auxiliaries for use in orthodontics |
| 102 | AFNOR NF EN 3684-2007 | 2007-08-01 | French | Aerospace series - Test methods - Titanium alloy wrought products - Determination of beta transus temperature - Metallographic method |
| 103 | AFNOR NF EN 15335-2007 | 2007-08-01 | French | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000掳C |
| 104 | AFNOR NF EN 61300-3-10-2007 | 2007-08-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10 : examinations and measurements - Gauge retention force |
| 105 | AFNOR NF EN 15153-1-2007 | 2007-08-01 | French | Railway applications - External visible and audible devices for high speed trains - Part 1 : head, marker and tail lamps |
| 106 | AFNOR NF C01-471-2007 | 2007-08-01 | French | International Electrotechnical Vocabulary - Part 471 : insulators |
| 107 | AFNOR NF EN ISO 252-2007 | 2007-08-01 | French | Conveyor belts - Adhesion between constitutive elements - Test method |
| 108 | AFNOR NF EN 1/A1-2007 | 2007-08-01 | French | Flued oil stoves with vaporizing burners |
| 109 | AFNOR NF EN 60745-2-14/A11-2007 | 2007-08-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-14 : particular requirements for planers |
| 110 | AFNOR FD U10-002-1-2007 | 2007-08-01 | French | Agricultural and forestry vehicles - Identification and signalling - Part 1 : Passive identification and signalling |
| 111 | AFNOR NF ISO 20473-2007 | 2007-08-01 | French | Optics and photonics - Spectral bands |
| 112 | AFNOR NF EN ISO 19493-2007 | 2007-08-01 | French | Water quality - Guidance on marine biological surveys of hard-substrate communities |
| 113 | AFNOR NF EN 3155-004-2007 | 2007-08-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 004 : contacts, electrical, male, type A, crimp, class T - Product standard |
| 114 | AFNOR NF EN 15079-2007 | 2007-08-01 | French | Copper and copper alloys - Analysis by spark source optical emission spectrometry (S-OES) |
| 115 | AFNOR NF EN 61587-1-2007 | 2007-08-01 | French | Mechanical structures for electronic equipment - Tests for IEC 60917 and IEC 60297 - Part 1 : climatic, mechanical tests and safety aspects for cabinets, racks, subracks and chassis |
| 116 | AFNOR NF EN 13224+A1-2007 | 2007-08-01 | French | Precast concrete product - Ribbed floor elements |
| 117 | AFNOR NF EN ISO 7823-3-2007 | 2007-08-01 | French | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3 : continuous cast sheets |
| 118 | AFNOR NF EN 2997-002-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 002 : specification of performance and contact arrangements |
| 119 | AFNOR NF EN ISO 15181-3-2007 | 2007-08-01 | French | Paint and varnishes - Detemination of the release rate of biocides from antifouling paints - Part 3 : calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract |
| 120 | AFNOR NF EN 2349-413-2007 | 2007-08-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 413 : vibration, sinusoidal and random |
| 121 | AFNOR XP A05-674-2007 | 2007-08-01 | French | Cathodic protection - Cathodic protection of the underwater parts of ships/vessels |
| 122 | AFNOR NF ISO 4209-1-2007 | 2007-08-01 | French | Truck and bus tyres and rims (metric series) - Part 1 : tyres |
| 123 | AFNOR NF EN 1993-5-2007 | 2007-08-01 | French | Eurocode 3 : Design of steel structures - Part 5 : piling |
| 124 | AFNOR NF ISO 21238-2007 | 2007-08-01 | French | Nuclear energy - Nuclear fuel technology - Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants |
| 125 | AFNOR NF ISO 4209-2-2007 | 2007-08-01 | French | Truck and bus tyres and rims (metric series) - Part 2 : rims |
| 126 | AFNOR NF ISO 5832-12-2007 | 2007-08-01 | French | Implants for surgery - Metallic materials - Part 12 : wrought cobalt-chrominium-molybdenum alloy |
| 127 | AFNOR NF EN ISO 8062-1-2007 | 2007-08-01 | French | Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1 : vocabulary |
| 128 | AFNOR NF EN 13567/IN1-2007 | 2007-08-01 | French | Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
| 129 | AFNOR NF EN 3155-014-2007 | 2007-08-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 014 : contacts, electrical, male, type A, crimp, class S - Product standard |
| 130 | AFNOR NF EN 13567+A1-2007 | 2007-08-01 | French | Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fencers - Requirements and test methods |
| 131 | AFNOR NF EN 3155-016-2007 | 2007-08-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 016 : contacts, electrical, male, type A, crimp, class S - Product standard |
| 132 | AFNOR NF EN ISO 14577-4-2007 | 2007-08-01 | French | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings |
| 133 | AFNOR NF EN 3733-008-2007 | 2007-08-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 掳C continuous - Part 008 : Plug sub-assembly for cable to EN 4532 (200 mu m/280 mu m fibre) - Product standard |
| 134 | AFNOR NF EN 15050-2007 | 2007-08-01 | French | Precast concrete products - Bridge elements |
| 135 | AFNOR NF EN 61988-4-2007 | 2007-08-01 | French | Plasma Display Panels - Part 4 : climatic and mechanical testing methods |
| 136 | AFNOR NF EN 2713-004-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 200 掳C - Part 004 : screened (braided) and jacketed, ink jet printable - Product standard |
| 137 | AFNOR NF EN 14153-1-2007 | 2007-08-01 | French | Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 1 : level 1 - Supervised Diver |
| 138 | AFNOR NF EN 13546+A1-2007 | 2007-08-01 | French | Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers and shin protectors for field players - Requirements and test methods |
| 139 | AFNOR NF EN 14120+A1-2007 | 2007-08-01 | French | Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test method |
| 140 | AFNOR NF EN 14799-2007 | 2007-08-01 | French | Air filters for general air cleaning - Terminology |
| 141 | AFNOR NF EN ISO 20988-2007 | 2007-08-01 | French | Air Quality - Guidelines for estimating measurement uncertainty |
| 142 | AFNOR NF EN 14120/IN1-2007 | 2007-08-01 | French | Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test method |
| 143 | AFNOR NF EN 2997-004-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 004 : jam-nut mounted receptacle - Product standard |
| 144 | AFNOR NF EN 2349-414-2007 | 2007-08-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 414 : mechanical shock |
| 145 | AFNOR NF EN ISO 11135-1-2007 | 2007-08-01 | French | Sterilization of health care products - Ethylene oxide - Part 1 : requirements for development, validation and routine control of a sterilization process for medical devices |
| 146 | AFNOR NF EN 568-2007 | 2007-08-01 | French | Mountaineering equipment - Ice anchors - Safety requirements and test methods |
| 147 | AFNOR NF EN 131-4-2007 | 2007-08-01 | French | Ladders - Part 4 : single or multiple hinge-joint ladders |
| 148 | AFNOR FD CEN/TR 14520-2007 | 2007-08-01 | French | Packaging - Reuse - Methods for assessing the performance of a reuse system |
| 149 | AFNOR NF EN ISO 16276-2-2007 | 2007-08-01 | French | Corrosion protection of steel structures by protective paints systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2 : cross-cut testing and X-cut testing |
| 150 | AFNOR NF ISO 10396-2007 | 2007-08-01 | French | Stationary source emissions - Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| 151 | AFNOR NF EN 4006-2007 | 2007-08-01 | French | Aerospace series - Aluminium alloy AL-P6082-T4 or T42 - Sheet and strip 0,4 mm < or = a < or = 6 mm |
| 152 | AFNOR NF EN ISO 20567-1-2007 | 2007-08-01 | French | Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1 : multi-impact testing |
| 153 | AFNOR NF EN 942-2007 | 2007-08-01 | French | Timber in joinery - General requirements |
| 154 | AFNOR NF EN ISO 2409-2007 | 2007-08-01 | French | Paints and varnishes - Cross-cut test |
| 155 | AFNOR NF EN 1434-2-2007 | 2007-08-01 | French | Heat meters - Part 2 : constructional requirements |
| 156 | AFNOR NF EN 14487-2-2007 | 2007-08-01 | French | Sprayed concrete - Part 2 : execution |
| 157 | AFNOR NF EN 13921-2007 | 2007-08-01 | French | Personal protective equipment - Ergonomic principles |
| 158 | AFNOR NF EN 13577-2007 | 2007-08-01 | French | Chemical attack on concrete - Determination of aggressive carbon dioxide content in water |
| 159 | AFNOR NF EN 14153-2-2007 | 2007-08-01 | French | Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 2 : level 2 - Autonomus Diver |
| 160 | AFNOR NF EN 14153-3-2007 | 2007-08-01 | French | Recreational diving services - Safety related minimum requirements for the training of recreational scuba divers - Part 3 : level 3 - Dive Leader |
| 161 | AFNOR NF EN 1999-1-1-2007 | 2007-08-01 | French | Eurocode 9 - Design of aluminium structures - Part 1-1 : general structural rules - Modified by NF EN 1999-1-1/A1:201007 (P22-151/A1) |
| 162 | AFNOR NF EN 15251-2007 | 2007-08-01 | French | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| 163 | AFNOR NF EN 15242-2007 | 2007-08-01 | French | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| 164 | AFNOR NF EN 4005-2007 | 2007-08-01 | French | Aerospace series - Aluminium alloy AL-P5052-O - Sheet and strip 0,3 mm < or = a < or = 6 mm |
| 165 | AFNOR NF P26-432-2007 | 2007-08-01 | French | Building hardware - Locks - Safety bolt latches |
| 166 | AFNOR NF EN 1947/IN1-2007 | 2007-08-01 | French | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| 167 | AFNOR NF ISO 8454-2007 | 2007-08-01 | French | Cigarettes - Determination of carbon monoxide in the vapour phase of cigarette smoke - NDIR method |
| 168 | AFNOR NF EN 55011-2007 | 2007-08-01 | French | Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement - Modified by NF EN 55011/A2:200709 (C91-011/A2) |
| 169 | AFNOR NF EN 1947+A1-2007 | 2007-08-01 | French | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| 170 | AFNOR NF EN 15239-2007 | 2007-08-01 | French | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of ventilation systems |
| 171 | AFNOR NF EN 3997-2007 | 2007-08-01 | French | Aerospace series - Aluminium alloy AL-P2024-T3 - Sheet and strip - 0,4 mm < or = a < or = 6 mm |
| 172 | AFNOR FD U10-002-2-2007 | 2007-08-01 | French | Agricultural and forestry vehicles - Identification and signalling - Part 2 : lighting |
| 173 | AFNOR XP P16-002-2007 | 2007-08-01 | French | Sewerage Glossary |
| 174 | AFNOR NF EN 12923-1-2007 | 2007-08-01 | French | Advanced technical ceramics - Monolithic ceramics - Part 1 : general practice for undertaking corrosion tests |
| 175 | AFNOR NF EN 60317-28/A2-2007 | 2007-08-01 | French | Specifications for particular types of winding wires - Part 28 : polyesterimide enamelled rectangular copper wire, class 180 |
| 176 | AFNOR NF M60-761-1-2007 | 2007-08-01 | French | Nuclear energy - Measurement of radioactivity in the environment - Water - Part 1 : Radon 222 and its short lived daughter products in water : their origins and measurement methods |
| 177 | AFNOR NF M60-808-2007 | 2007-08-01 | French | Nuclear energy - Measurement of the radioactivity in the environment - Water - Measurement of polonium 210 activity in water by alpha spectrometry |
| 178 | AFNOR NF EN 1434-1-2007 | 2007-08-01 | French | Heat meters - Part 1 : general requirements |
| 179 | AFNOR NF EN 1434-4-2007 | 2007-08-01 | French | Heat meters - Part 4 : pattern approval tests |
| 180 | AFNOR NF ISO 1138-2007 | 2007-08-01 | French | Rubber compounding ingredients - Carbon black - Determination of sulfur content |
| 181 | AFNOR NF EN 1434-5-2007 | 2007-08-01 | French | Heat meters - Part 5 : initial verification tests |
| 182 | AFNOR NF EN 60079-28-2007 | 2007-08-01 | French | Explosive atmospheres - Part 28 : protection of equipment and transmission systems using optical radiation |
| 183 | AFNOR NF EN 50464-3-2007 | 2007-08-01 | French | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 3 : determination of the power rating of a transformer loaded with non-sinusoidal currents |
| 184 | AFNOR NF EN 60034-14/A1-2007 | 2007-08-01 | French | Rotating electrical machines - Part 14 : mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| 185 | AFNOR FD X07-015-2007 | 2007-08-01 | French | Metrology - Traceability of measurement results to the international System of Units (SI) |
| 186 | AFNOR NF EN 60061-3/A38-2007 | 2007-08-01 | French | Lamp caps and holders together with gauges for the control of intechangeablity and safety - Part 3 : gauges |
| 187 | AFNOR NF EN 2713-006-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 200 掳C - Part 006 : screened (braided) and jacketed, CO2 laser printable - Product standard |
| 188 | AFNOR NF EN 2714-004-2007 | 2007-08-01 | French | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 掳C and 260 掳C - Part 004 : screened (braided) and jacketed, ink jet printable - Product standard |
| 189 | AFNOR NF EN 901-2007 | 2007-08-01 | French | Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite |
| 190 | AFNOR NF EN 60061-1/A39-2007 | 2007-08-01 | French | Lamp caps and holders together with gauges for the control of interchangeablity and safety - Part 1 : lamp caps |
| 191 | AFNOR NF EN 50464-4-2007 | 2007-08-01 | French | Three-phase oil-immersed distribution transformers 50 Hz, from 50 kVA to 2 500 kVA with highest voltage for equipment not exceeding 36 kV - Part 4 : requirements and tests concerning pressurised corrugated tanks |
| 192 | AFNOR NF EN 61300-3-24-2007 | 2007-08-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24 : examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre |
| 193 | AFNOR NF EN 60745-2-17/A11-2007 | 2007-08-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-17 : particular requirements for routers and trimmers |
| 194 | AFNOR NF EN 14512-2007 | 2007-08-01 | French | Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts |
| 195 | AFNOR NF EN 1434-6-2007 | 2007-08-01 | French | Heat meters - Part 6 : installation, commissioning, operational monitoring and maintenance |
| 196 | AFNOR FD P84-204-3/A1-2007 | 2007-08-01 | French | DTU 43.1 - Building works - Impermeability of flat roofs and inclined roofs with a masonry structural member in a low-land climate - Part 3 : guide intented for the contracting authority |
| 197 | AFNOR NF EN 13224/IN1-2007 | 2007-08-01 | French | Precast concrete product - Ribbed floor elements |
| 198 | AFNOR NF EN 1395-6-2007 | 2007-08-01 | French | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6 : manipulator systems |
| 199 | AFNOR NF EN 14985-2007 | 2007-08-01 | French | Cranes - Slewing Jib Cranes |
| 200 | AFNOR NF EN 13232-8-2007 | 2007-08-01 | French | Railway applications - Track - Switches and crossings - Part 8 : expansion devices |
| 201 | AFNOR NF EN 1395-5-2007 | 2007-08-01 | French | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 5 : plasma spraying in chambers |
| 202 | AFNOR NF EN 3155-015-2007 | 2007-08-01 | French | Aerospace series - Electrical contacts used in elements of connection - Part 015 : contacts, electrical, female 015, type A, crimp, class S - Product standard |
| 203 | AFNOR NF EN 13546/IN1-2007 | 2007-08-01 | French | Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers and shin protectors for field players - Requirements and test methods |
| 204 | AFNOR NF EN 3660-002-2007 | 2007-08-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 002 : index of product standards |
| 205 | AFNOR NF EN 2997-006-2007 | 2007-08-01 | French | Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 掳C to 175 掳C continuous, 200 掳C continuous, 260 掳C peak - Part 006 : hermetic jam-nut mounted receptacle - Product standard |
| 206 | AFNOR NF EN 2469-2007 | 2007-08-01 | French | Aerospace series - Steel FE-PA3901 (X1CrNi18-10) - Air melted - Softened - Wires - 0,4 mm inf茅rior or equal to D inf茅rior or equal to 12,5 mm - 450 Mpa inf茅rior or equal to Rm inf茅rior or equal to 650 MPa |
| 207 | AFNOR NF EN 12697-31-2007 | 2007-08-01 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 31 : specimen preparation by gyratory compactor |
| 208 | AFNOR NF EN 2349-412-2007 | 2007-07-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 412 : seal |
| 209 | AFNOR NF EN ISO 16773-2-2007 | 2007-07-01 | French | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 2 : collection data |
| 210 | AFNOR XP ISO/TS 13399-50-2007 | 2007-07-01 | French | Cutting tool data representation and exchange - Part 50 : reference dictionary for reference systems and common concepts |
| 211 | AFNOR NF EN ISO 16773-1-2007 | 2007-07-01 | French | Paints and varnishes - Electrochemical impedance spectroscopy (EIS) of high-impedance coated specimens - Part 1 : terms and definitions |
| 212 | AFNOR NF EN 12278-2007 | 2007-07-01 | French | Mountaineering equipment - Pulleys - Safety requirements and test methods |
| 213 | AFNOR NF EN 12271-2007 | 2007-07-01 | French | Surface dressing - Requirements |
| 214 | AFNOR NF DTU 40.44-2007 | 2007-07-01 | French | Building works - Roof covering made of stainless steel sheet and long sheet - Part 1-1 : technical specifications - Part 1-2 : general criteria for the choice of materials - Part 2 : contract bill of special clauses |
| 215 | AFNOR NF EN 14154-3/IN1-2007 | 2007-07-01 | French | Water meters - Part 3 : test methods and equipment |
| 216 | AFNOR NF EN 14154-3+A1-2007 | 2007-07-01 | French | Water meters - Part 3 : test methods and equipment |
| 217 | AFNOR NF EN 14154-2/IN1-2007 | 2007-07-01 | French | Water meters - Part 2 : installation and conditions of use |
| 218 | AFNOR NF EN 4588-2007 | 2007-07-01 | French | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| 219 | AFNOR NF EN 14154-2+A1-2007 | 2007-07-01 | French | Water meters - Part 2 : installation and conditions of use |
| 220 | AFNOR NF E90-020-2007 | 2007-07-01 | French | Mechanical vibration and shock - Measurement method and evaluation of the response of building, sensitive equipments and occupants |
| 221 | AFNOR NF EN 14154-1/IN1-2007 | 2007-07-01 | French | Water meters - Part 1 : general requirements |
| 222 | AFNOR NF EN 2349-410-2007 | 2007-07-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 410 : mould |
| 223 | AFNOR NF EN 2349-415-2007 | 2007-07-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 415 : acceleration |
| 224 | AFNOR NF EN 14154-1+A1-2007 | 2007-07-01 | French | Water meters - Part 1 : general requirements |
| 225 | AFNOR NF DTU 40.44 P1-1-2007 | 2007-07-01 | French | Building works - Roof covering made of stainless steel sheet and long sheet - Part 1-1 : technical specifications |
| 226 | AFNOR NF EN 3-8-2007 | 2007-07-01 | French | Portable fire extinguishers - Part 8 : additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal or lower than 30 bar |
| 227 | AFNOR NF EN 2349-601-2007 | 2007-07-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 601 : compass safety distance |
| 228 | AFNOR NF EN 3-9-2007 | 2007-07-01 | French | Portable fire extinguishers - Part 9 : Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers |
| 229 | AFNOR NF EN 15153-2-2007 | 2007-07-01 | French | Railway applications - External visible and audible warning devices for high speed trains - Part 2 : warning horns |
| 230 | AFNOR NF DTU 40.44 P1-2-2007 | 2007-07-01 | French | Building works - Roof covering made of stainless steel sheet and long sheet - Part 1-2 : general criteria for the choice of materials |
| 231 | AFNOR NF DTU 40.44 P2-2007 | 2007-07-01 | French | Building works - Roof covering made of stainless steel sheet and long sheet - Part 2 : contract bill of special clauses |
| 232 | AFNOR CWA 14050-39-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 39 : XFS MIB Device Specific Definitions - Alarm Device Class MIB 1.1 V5 |
| 233 | AFNOR CWA 14050-32-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 32 : XFS MIB Device Specific Definitions - Cash Dispenser Device Class MIB 1.1 V5 |
| 234 | AFNOR NF EN 14629-2007 | 2007-07-01 | French | Products and systems for the protection and repair of concrete structures - Test methods - Determination of chloride content in hardened concrete |
| 235 | AFNOR NF EN 1670-2007 | 2007-07-01 | French | Building hardware - Corrosion resistance - Requirements and test methods |
| 236 | AFNOR NF EN 60947-6-2/A1-2007 | 2007-07-01 | French | Low-voltage switchgear and controlgear - Part 6-2 : multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
| 237 | AFNOR NF EN 2003-009-2007 | 2007-07-01 | French | Aerospace series - Tests methods - Titanium and titanium alloys - Part 009 : determination of surface contamination |
| 238 | AFNOR NF EN 60061-3/A37-2007 | 2007-07-01 | French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3 : gauges |
| 239 | AFNOR NF EN 61482-1-2-2007 | 2007-07-01 | French | Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-2 : test methods - Method 2 : determination of arc protection class of material and clothing by using a constrained and directed arc (box text) |
| 240 | AFNOR NF EN 15536-2007 | 2007-07-01 | French | Derivatives from coal pyrolysis - Coal tar based oils : wash oils - Specifications and test methods |
| 241 | AFNOR NF EN 60745-2-3-2007 | 2007-07-01 | French | Hand-held motor operated electric tools - Safety - Part 2-3 : particular requirements for grinders, polishers and disk-type sanders - Modified by NF EN 60745-2-3/A11:201004 (C75-745-2-3/A11) |
| 242 | AFNOR XP CEN/TS 14159-2007 | 2007-07-01 | French | Textile floor coverings - Requirements for tolerances on (linear) dimensions of rugs, runners, carpet tiles and wall-to-wall carpet and for tolerances on pattern repeat |
| 243 | AFNOR NF R18-805-2007 | 2007-07-01 | French | Road vehicles - Access of at least one reduced mobility passenger to taxi |
| 244 | AFNOR NF EN ISO 21227-3-2007 | 2007-07-01 | French | Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 3 : evaluation of delamination and corrosion around a scribe |
| 245 | AFNOR NF EN 60061-2/A35-2007 | 2007-07-01 | French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2 : lampholders |
| 246 | AFNOR NF EN 15424-2007 | 2007-07-01 | French | Sterilization of medical devices - Low temperature steam and formaldehyde - Requiremenrs for development, validation and routine control of sterilization proces for medical devices |
| 247 | AFNOR NF EN ISO 21415-1-2007 | 2007-07-01 | French | Wheat and wheat flour - Gluten content - Part 1 : determination of wet gluten by manual method |
| 248 | AFNOR NF EN 15240-2007 | 2007-07-01 | French | Ventilation for buildings - Energy performance of buildings - Guidelines for inspection of air-conditioning systems |
| 249 | AFNOR NF U47-100-2007 | 2007-07-01 | French | Animal health analysis methods - Isolation and identification of Salmonella or search for particular serovar's in the animal production sector |
| 250 | AFNOR UTE C15-520-2007 | 2007-07-01 | French | Wiring systems - Methods of installation - Connections |
| 251 | AFNOR CWA 14050-34-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 34 : XFS MIB Device Specific Definitions - Check Reader/Scanner Device Class MIB 1.1 V5 |
| 252 | AFNOR NF EN 60745-2-14/A1-2007 | 2007-07-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-14 : particular requirements for planers |
| 253 | AFNOR NF EN 15241-2007 | 2007-07-01 | French | Ventilation for buildings - Calculation methods for energy losses due to ventilation and infiltration in commercial buildings |
| 254 | AFNOR NF EN 203-2-10-2007 | 2007-07-01 | French | Gas heated catering equipment - Part 2-10 : specific requirements - Chargrills |
| 255 | AFNOR NF EN 2003-010-2007 | 2007-07-01 | French | Aerospace series - Test methods - Titanium and titanium alloys - Part 010 : sampling for determination of hydrogen content |
| 256 | AFNOR CWA 14050-41-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 41 : XFS MIB Device Specific Definitions - Cash In Module Device Class MIB 1.1 V6 |
| 257 | AFNOR NF EN 2349-409-2007 | 2007-07-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 409 : ozone resistance |
| 258 | AFNOR NF EN 10255/IN1-2007 | 2007-07-01 | French | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| 259 | AFNOR CWA 14050-33-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 33 - XFS MIB Device Specific Definitions - PIN Keypad Device Class MIB 1.1 V5 |
| 260 | AFNOR NF EN 15250-2007 | 2007-07-01 | French | Slow heat release appliances fired by solid fuel - Requirements and test Methods |
| 261 | AFNOR CWA 14050-37-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 37 : XFS MIB Device Specific Definitions - Sensors and Indicators Unit Device Class MIB 1.1 V5 |
| 262 | AFNOR NF EN ISO 17249/A1-2007 | 2007-07-01 | French | Safety footwear with resistance to chain saw cutting |
| 263 | AFNOR NF EN 15099-1-2007 | 2007-07-01 | French | Irrigation techniques - Remote monitoring and control for irrigation systems - Part 1 : general considerations |
| 264 | AFNOR CWA 14050-35-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 35 : XFS MIB Device Specific Definitions - Depository Device Class MIB 1.1 V5 |
| 265 | AFNOR NF EN 2349-411-2007 | 2007-07-01 | French | Aerospace series - Requirements and test procedures for relays and contactors - Part 411 : temperature change |
| 266 | AFNOR NF EN 131-1-2007 | 2007-07-01 | French | Ladders - Part 1 : terms, types, functional sizes |
| 267 | AFNOR NF EN 12407-2007 | 2007-07-01 | French | Natural stone test methods - Petrographic examination |
| 268 | AFNOR NF EN ISO 8748-2007 | 2007-07-01 | French | Spring-type straight pins - Coiled, heavy duty |
| 269 | AFNOR NF EN ISO 8750-2007 | 2007-07-01 | French | Spring-type straight pins - Coiled, standard duty |
| 270 | AFNOR NF EN ISO 8751-2007 | 2007-07-01 | French | Spring-type straight pins - Coiled, light duty |
| 271 | AFNOR NF EN 12229-2007 | 2007-07-01 | French | Surfaces for sports areas - Procedure for the preparation of synthetic turf and bneedle-punch test pieces |
| 272 | AFNOR XP ISO/TS 13399-60-2007 | 2007-07-01 | French | Cutting tool data representation and exchange - Part 60 : reference dictionary for connection systems |
| 273 | AFNOR XP ISO/TS 13399-5-2007 | 2007-07-01 | French | Cutting tool data representation and exchange - Part 5 : reference dictionary for assembly items |
| 274 | AFNOR XP ISO/TS 13399-4-2007 | 2007-07-01 | French | Cutting tool data representation and exchange - Part 4 : reference dictionary for adaptive items |
| 275 | AFNOR XP ISO/TS 13399-3-2007 | 2007-07-01 | French | Cutting tool data representation and exchange - Part 3 : reference dictionary for tool items |
| 276 | AFNOR NF EN 60745-2-5-2007 | 2007-07-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-5 : particular requirements for circular saws - Modified by NF EN 60745-2-5/A11:201004 (C75-745-2-5/A11) |
| 277 | AFNOR NF EN 60034-9/A1-2007 | 2007-07-01 | French | Rotating electrical machines - Part 9 : noise limits |
| 278 | AFNOR NF EN 10255+A1-2007 | 2007-07-01 | French | Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| 279 | AFNOR NF EN 10247-2007 | 2007-07-01 | French | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| 280 | AFNOR NF ISO 23470-2007 | 2007-07-01 | French | Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution |
| 281 | AFNOR CWA 14050-43-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 43 : XFS MIB Device Specific Definitions Vendor Dependent Mode Device Class MIB 1.1 V6 |
| 282 | AFNOR XP X30-408-2007 | 2007-07-01 | French | Household waste - Characterization of a sample of household related waste |
| 283 | AFNOR XP X08-150-2007 | 2007-07-01 | French | Information and safety devices - Wireless risk information system (Iris.Radio) |
| 284 | AFNOR NF EN 15317-2007 | 2007-07-01 | French | Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment |
| 285 | AFNOR NF EN 15309-2007 | 2007-07-01 | French | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| 286 | AFNOR NF EN 15307-2007 | 2007-07-01 | French | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| 287 | AFNOR CEN/TS 15531-1-2007 | 2007-07-01 | French | Public transport - Service interface for real-time information relating to public transport operations - Part 1 : context and framework |
| 288 | AFNOR CEN/TS 15531-2-2007 | 2007-07-01 | French | Public transport - Service interface for real-time information relating to public transport operations - Part 2 : communications infrastructure |
| 289 | AFNOR CEN/TS 15531-3-2007 | 2007-07-01 | French | Public transport - Service interface for real-time information relating to public transport operations - Part 3 : functional service interfaces |
| 290 | AFNOR NF EN 15284-2007 | 2007-07-01 | French | Materials and articles in contact with food stuffs - Test method for the resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware |
| 291 | AFNOR NF EN 15208-2007 | 2007-07-01 | French | Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and Interface specifications |
| 292 | AFNOR NF EN 131-3-2007 | 2007-07-01 | French | Ladders - Part 3 : user instructions |
| 293 | AFNOR NF EN 15361-2007 | 2007-07-01 | French | Determination of the influence of the corrosion protection coating on the anchorage capacity of the transverse anchorage bars in prefabricated reinforced components of autoclaved aerated concrete |
| 294 | AFNOR CWA 14050-38-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 38 : XFS MIB Device Specific Definitions - Camera Device Class MIB 1.1 V5 |
| 295 | AFNOR CWA 14050-29-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 29 : XFS MIB Architecture and SNMP Extensions MIB Version 1.1, V7 |
| 296 | AFNOR NF EN 60061-1/A38-2007 | 2007-07-01 | French | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1 : lamp caps |
| 297 | AFNOR NF EN 15048-2-2007 | 2007-07-01 | French | Non-preloaded structural bolting assemblies - Part 2 : suitability test |
| 298 | AFNOR NF EN 15048-1-2007 | 2007-07-01 | French | Non-preloaded structural bolting assemblies - Part 1 : general requirements |
| 299 | AFNOR CWA 14050-31-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 31 : XFS MIB Device Specific Definitions - Identification Card Device Class MIB 1.1 V5 |
| 300 | AFNOR CWA 14050-36-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 36 : XFS MIB Device Specific Definitions - Text Terminal Unit Device Class MIB 1.1 V6 |
| 301 | AFNOR NF EN 50289-1-16-2007 | 2007-07-01 | French | Communication cables - Specifications for test methods - Part 1-16 : electromagnetic performance - Coupling attenuation of cable assemblies (Field conditions) |
| 302 | AFNOR NF ISO 19732-2007 | 2007-07-01 | French | Equipment for crop protection - Sprayer strainers - Colour coding for identification |
| 303 | AFNOR NF ISO 2328-2007 | 2007-07-01 | French | Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions |
| 304 | AFNOR NF EN 1993-1-8/NA-2007 | 2007-07-01 | French | Eurocode 3 - Design of steel structure - Part 1-8 : design of joints - National Annex to NF EN 1993-1-8:2005 - Design of joints |
| 305 | AFNOR NF EN 1993-1-6-2007 | 2007-07-01 | French | Eurocode 3 : Design of steel structures - Part 1-6 : strength and stability of shell structures |
| 306 | AFNOR NF EN 13999-2-2007 | 2007-07-01 | French | Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 2 : determination of volatile organic compounds |
| 307 | AFNOR NF EN 13779-2007 | 2007-07-01 | French | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| 308 | AFNOR NF EN 747-1-2007 | 2007-07-01 | French | Furniture - Bunk beds and high beds for domestic use - Part 1 : safety, strength and durability requirements |
| 309 | AFNOR NF EN 747-1-2007 | 2007-07-01 | French | Furniture - Bunk beds and high beds for domestic use - Part 1 : safety, strength and durability requirements |
| 310 | AFNOR NF EN 1881-2007 | 2007-07-01 | French | Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method |
| 311 | AFNOR NF EN 14992-2007 | 2007-07-01 | French | Precast concrete products - Wall elements |
| 312 | AFNOR NF EN 45020-2007 | 2007-07-01 | French | Standardization and related activities - General vocabulary |
| 313 | AFNOR NF EN 1739-2007 | 2007-07-01 | French | Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure |
| 314 | AFNOR NF EN 494/IN3-2007 | 2007-07-01 | French | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| 315 | AFNOR NF EN 494+A3-2007 | 2007-07-01 | French | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| 316 | AFNOR NF EN 71-2/IN1-2007 | 2007-07-01 | French | Safety of toys - Part 2 : flammability |
| 317 | AFNOR NF ISO 14065-2007 | 2007-07-01 | French | Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition |
| 318 | AFNOR NF EN 1993-4-3-2007 | 2007-07-01 | French | Eurocode 3 - Design of steel structures - Part 4-3 : pipelines |
| 319 | AFNOR NF EN 1993-4-2-2007 | 2007-07-01 | French | Eurocode 3 - Design of steel structures - Part 4-2 : tanks |
| 320 | AFNOR NF EN 1052-3/A1-2007 | 2007-07-01 | French | Methods of test for masonry - Part 3 : determination of initial shear strength |
| 321 | AFNOR NF EN 71-2+A1-2007 | 2007-07-01 | French | Safety of toys - Part 2 : flammability |
| 322 | AFNOR CWA 14050-40-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 40 : XFS MIB Device Specific Definitions - Card Embossing Unit Device Class MIB 1.1 V5 |
| 323 | AFNOR NF EN 959-2007 | 2007-07-01 | French | Mountaineering equipment - Rock anchors - Safety requirements and test methods |
| 324 | AFNOR NF EN 694/IN1-2007 | 2007-07-01 | French | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| 325 | AFNOR NF EN 694+A1-2007 | 2007-07-01 | French | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| 326 | AFNOR NF EN 14843-2007 | 2007-07-01 | French | Precast concrete products - Stairs |
| 327 | AFNOR NF S61-970-2007 | 2007-07-01 | French | Installation rules for fire detection systems - Modified by NF S61-970/A1:200904 (S61-970/A1),NF S61-970/A2:201011 (S61-970/A2) |
| 328 | AFNOR CWA 14050-30-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 30 : XFS MIB Device Specific Definitions - Printer Device Class MIB 1.1 V6 |
| 329 | AFNOR NF EN 14822-3-2007 | 2007-07-01 | French | Health informatics - General purpose information components - Part 3 : clinical |
| 330 | AFNOR CWA 14050-44-2007 | 2007-07-01 | French | Extensions for Financial Services (XFS) interface specification - Release 3.03 - Part 44 : XFS MIB Application Management MIB 1.1 V9 |
| 331 | AFNOR NF T75-611-2007 | 2007-07-01 | French | Cosmetics - Microbiology - Evaluation of the antimicrobial protection of a cosmetic product |
| 332 | AFNOR NF EN 12794+A1-2007 | 2007-07-01 | French | Precast concrete products - Foundation piles |
| 333 | AFNOR NF EN 12794/IN1-2007 | 2007-07-01 | French | Precast concrete products - Foundation piles |
| 334 | AFNOR NF EN 14822-2-2007 | 2007-07-01 | French | Health informatics - General purpose information components - Part 2 : non-clinical |
| 335 | AFNOR NF X30-418-2007 | 2007-07-01 | French | Waste - Determination of the permeability of an existing geological formation of added or artificially reconstituted materials - Open-type, double-ring infiltrometers |
| 336 | AFNOR NF T90-554-2007 | 2007-07-01 | French | Water quality - On-line sensors/analysing equipment for low turbidity measurement - Specifications and performance tests |
| 337 | AFNOR NF EN 13175+A2-2007 | 2007-07-01 | French | LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings |
| 338 | AFNOR NF EN 13175/IN2-2007 | 2007-07-01 | French | LPG equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings |
| 339 | AFNOR NF EN ISO 835-2007 | 2007-07-01 | French | Laboratory glassware - Graduated pipettes |
| 340 | AFNOR NF EN 15195-2007 | 2007-07-01 | French | Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels by combustion in a constant volume chamber |
| 341 | AFNOR NF EN 14390-2007 | 2007-07-01 | French | Fire-test - Large-scale room reference test for surface products |
| 342 | AFNOR NF EN 13368-2-2007 | 2007-07-01 | French | Fertilizers - Determination of chelating agents in fertilizers by chromatography - Part 2 : determination of Fe chelated by o,o-EDDHA and o,o-EDDHMA by ion pair chromatography |
| 343 | AFNOR NF EN 15323-2007 | 2007-07-01 | French | Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT) |
| 344 | AFNOR NF EN 14991-2007 | 2007-07-01 | French | Precast concrete products - Foundation elements |
| 345 | AFNOR NF EN ISO 9073-13-2007 | 2007-07-01 | French | Textiles - Test methods for nonwovens - Part 13 : repeated liquid strike-through time |
| 346 | AFNOR CEN/TS 15531-1-2007 | 2007-07-01 | French | Public transport - Service interface for real-time information relating to public transport operations - Part 1 : context and framework |
| 347 | AFNOR CEN/TS 15531-3-2007 | 2007-07-01 | French | Public transport - Service interface for real-time information relating to public transport operations - Part 3 : functional service interfaces |
| 348 | AFNOR CEN/TS 15531-2-2007 | 2007-07-01 | French | Public transport - Service interface for real-time information relating to public transport operations - Part 2 : communications infrastructure |
| 349 | AFNOR NF S61-758-2007 | 2007-06-01 | French | Firefighting equipment - Valves and fittings for fire risers (dry and water based) |
| 350 | AFNOR NF EN ISO 6149-2-2007 | 2007-06-01 | French | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2 : dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| 351 | AFNOR NF ISO 22522-2007 | 2007-06-01 | French | Crop protection equipment - Field measurement of spray distribution in tree and bush crops |
| 352 | AFNOR NF EN 14814-2007 | 2007-06-01 | French | Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
| 353 | AFNOR NF EN ISO 11140-4-2007 | 2007-06-01 | French | Sterilization of health care products - Chemical indicators - Part 4 : class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| 354 | AFNOR NF EN 1483-2007 | 2007-06-01 | French | Water quality - Determination of mercury - Method using atomic absorption spectrometry |
| 355 | AFNOR NF X20-702-2007 | 2007-06-01 | French | Chemical breath tester - Estimation of the alcohol impregnation by analysis of expelled air - Specifications and test methods |
| 356 | AFNOR NF EN ISO 150-2007 | 2007-06-01 | French | Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test |
| 357 | AFNOR NF EN ISO 105-J05-2007 | 2007-06-01 | French | Textiles - Tests for colour fastness - Part J05 : method for the instrumental assessment of the colour inconstancy of a specimen with change of illuminant (CMCCON02) |
| 358 | AFNOR NF EN ISO 105-C10-2007 | 2007-06-01 | French | Textiles - Tests for colour fastness - Part C10 : colour fastness to washing with soap or soap and soda |
| 359 | AFNOR NF EN 60335-2-97-2007 | 2007-06-01 | French | Household and similar electrical appliances - Safety - Part 2-97 : particular requirements for drives for rolling shutters, awnings, blinds and similar equipment - Modified by NF EN 60335-2-97/A11:200909 (C73-897/A11),NF EN 60335-2-97/A2:201007 (C73-897/A2) |
| 360 | AFNOR AC X50-782-2007 | 2007-06-01 | French | Commitments of companies of Marseille and its suburbs - Actions conducted in favour of occupational integration |
| 361 | AFNOR NF ISO 5834-1-2007 | 2007-06-01 | French | Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 1 : powder form |
| 362 | AFNOR NF EN ISO 21415-4-2007 | 2007-06-01 | French | Wheat and wheat flour - Gluten content - Part 4 : determination of dry gluten content from wet gluten by a rapid drying method |
| 363 | AFNOR NF EN ISO 21415-3-2007 | 2007-06-01 | French | Wheat and wheat flour - Gluten content - Part 3 : determination of dry gluten from wet gluten by an oven drying method |
| 364 | AFNOR NF ISO 5834-5-2007 | 2007-06-01 | French | Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5 : morphology assessment method |
| 365 | AFNOR NF EN 14540/IN1-2007 | 2007-06-01 | French | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| 366 | AFNOR NF EN 14540+A1-2007 | 2007-06-01 | French | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| 367 | AFNOR NF EN 14534/IN1-2007 | 2007-06-01 | French | Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail |
| 368 | AFNOR NF EN ISO 13936-3-2007 | 2007-06-01 | French | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3 : needle clamp method |
| 369 | AFNOR NF EN 14534+A1-2007 | 2007-06-01 | French | Postal services - Quality of service - Measurement of the transit time of end-to-end services for bulk mail |
| 370 | AFNOR XP CEN/TS 15534-3-2007 | 2007-06-01 | French | Wood-plastic composites (WPC) - Part 3 : characterisation of WPC products |
| 371 | AFNOR XP CEN/TS 15534-2-2007 | 2007-06-01 | French | Wood-plastics composites (WPC) - Part 2 : characterisation of WPC materials |
| 372 | AFNOR XP CEN/TS 15534-1-2007 | 2007-06-01 | French | Wood-plastic composite (WPC) - Part 1 : test methods for characterisation of WPC materials and products |
| 373 | AFNOR NF EN 14508/IN1-2007 | 2007-06-01 | French | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| 374 | AFNOR NF EN 14508+A1-2007 | 2007-06-01 | French | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail |
| 375 | AFNOR FD CEN/TR 15351-2007 | 2007-06-01 | French | Plastics - Guide for vocabulary in the field of degradable and biodegradable polymers and plastic items |
| 376 | AFNOR NF EN ISO 6149-1-2007 | 2007-06-01 | French | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 1 : ports with truncated housing for O-ring seal |
| 377 | AFNOR XP ISO/TS 22003-2007 | 2007-06-01 | French | Food safety management systems - Requirements for bodies providing audit and certification of food safety management systems |
| 378 | AFNOR XP ISO/TS 21872-2-2007 | 2007-06-01 | French | Microbiology of food and animal feeding stuffs - Horizontal method for the detection of potentially enteropathogenic Vibrio spp. - Part 2 : detection of species other than Vibrio parahaemolyticus and Vibrio cholerae |
| 379 | AFNOR XP ISO/TS 21872-1-2007 | 2007-06-01 | French | Microbiology of food and animal feeding stuffs - Horizontal method for the detection of potentially enteropathogenic Vibrio spp. - Part 1 : detection of Vibrio parahaemolyticus and Vibrio cholerae |
| 380 | AFNOR NF ISO 14594-2007 | 2007-06-01 | French | Microbeam analysis - Electron probe microanalysis - Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy |
| 381 | AFNOR NF EN 3114-001-2007 | 2007-06-01 | French | Aerospace series - Test method - Microstructure of (alpha + beta) titanium alloy wrought products - Part 001 : general requirements |
| 382 | AFNOR NF EN 3114-003-2007 | 2007-06-01 | French | Aerospace series - Test method - Microstructure of (alpha + beta) titanium alloy wrought products - Part 003 : microstructure of plate |
| 383 | AFNOR NF EN 12487-2007 | 2007-06-01 | French | Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys |
| 384 | AFNOR NF EN 13566-7-2007 | 2007-06-01 | French | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7 : lining with spirally wound pipes |
| 385 | AFNOR NF EN 3114-004-2007 | 2007-06-01 | French | Aerospace series - Test method - Microstructure of (alpha + beta) titanium alloy wrought products - Part 004 : microstructure of sheet for superplastic forming |
| 386 | AFNOR NF EN ISO 17872-2007 | 2007-06-01 | French | Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing |
| 387 | AFNOR NF EN 13850+A1-2007 | 2007-06-01 | French | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single priority mail and first class mail |
| 388 | AFNOR NF EN 4358-2007 | 2007-06-01 | French | Aerospace series - Six lobe recess - Drivers, double ended, 90掳 |
| 389 | AFNOR NF EN 383-2007 | 2007-06-01 | French | Timber structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| 390 | AFNOR NF ISO 212-2007 | 2007-06-01 | French | Essential oils - Sampling |
| 391 | AFNOR NF EN 1999-1-5-2007 | 2007-06-01 | French | Eurocode 9 - design of aluminium structures - Part 1-5 : shell structures |
| 392 | AFNOR NF EN 13544-1-2007 | 2007-06-01 | French | Respiratory therapy equipment - Part 1 : nebulizing systems and their components |
| 393 | AFNOR NF EN ISO 6149-3-2007 | 2007-06-01 | French | Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3 : dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| 394 | AFNOR NF EN 12592-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of solubility |
| 395 | AFNOR NF EN 12593-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of the Fraass breaking point |
| 396 | AFNOR NF EN 12594-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Preparation of test samples |
| 397 | AFNOR NF EN 12595-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of kinematic viscosity |
| 398 | AFNOR NF EN 12596-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| 399 | AFNOR NF EN 12606-1-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1 : method by distillation |
| 400 | AFNOR NF EN 12607-1-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 1 : RTFOT method |
| 401 | AFNOR NF EN 12607-2-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 2 : TFOT method |
| 402 | AFNOR NF EN 12607-3-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of the resistance to hardening under the influence of heat and air - Part 3 : RFT method |
| 403 | AFNOR NF S61-759-2007 | 2007-06-01 | French | Firefighting equipment - Fire risers (dry and water based) - Installation and maintenance |
| 404 | AFNOR NF EN 61557-3-2007 | 2007-06-01 | French | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3 : loop impedance |
| 405 | AFNOR NF EN 3912-2007 | 2007-06-01 | French | Aerospace series - Bolts, pan head, six lobe recess, relieved shank, long thread, in heat resisting steel FE-PA2601 (FE-PA92HT, A286), silver plated - Classification : 1 100 MPa (at ambient temperature)/650 掳C |
| 406 | AFNOR NF EN 3913-2007 | 2007-06-01 | French | Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), silver plated on internal thread, for salvage of components |
| 407 | AFNOR NF EN 4357-2007 | 2007-06-01 | French | Aerospace series - Six lobe recess - Drivers, handle |
| 408 | AFNOR NF EN 4356-2007 | 2007-06-01 | French | Aerospace series - Six lobe recess - Drivers, short |
| 409 | AFNOR NF EN 4354-2007 | 2007-06-01 | French | Aerospace series - Six lobe recess - Drivers, relieved |
| 410 | AFNOR NF EN 4057-100-2007 | 2007-06-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 100 : general |
| 411 | AFNOR NF EN 13953+A1-2007 | 2007-06-01 | French | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| 412 | AFNOR NF EN 13953/IN1-2007 | 2007-06-01 | French | LPG equipment and accessories - Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) |
| 413 | AFNOR NF EN 1963-2007 | 2007-06-01 | French | Textile floor coverings - Tests using the Lisson Tretrad Machine |
| 414 | AFNOR NF ISO 8364-2007 | 2007-06-01 | French | Alpine skis and bindings - Binding mounting area - Requirements and test methods |
| 415 | AFNOR NF EN 1999-1-2-2007 | 2007-06-01 | French | Eurocode 9 - Design of aluminium structures - Part 1-2 : structural fire design |
| 416 | AFNOR NF EN ISO 12680-1-2007 | 2007-06-01 | French | Methods of test for refractory products - Part 1 : determination of dynamic Young's modulus (MOE) by impulse excitation of vibration |
| 417 | AFNOR XP T54-980-1-2007 | 2007-06-01 | French | Plastics - Mulching films made from additived polyolefin with life time controlled in the environment for use in agriculture and horticulture - Part 1 : general, eco-toxicity and oxodegradability specifications |
| 418 | AFNOR NF EN 60317-0-5-2007 | 2007-06-01 | French | Specifications for particular types of winding wires - Part 0-5 : general requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire |
| 419 | AFNOR NF EN 15033-2007 | 2007-06-01 | French | Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats |
| 420 | AFNOR NF EN ISO 15536-2-2007 | 2007-06-01 | French | Ergonomics - Computer manikins and body templates - Part 2 : verification of functions and validation of dimensions for computer manikin systems |
| 421 | AFNOR NF EN 1427-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of softening point - Ring and Ball method |
| 422 | AFNOR NF EN 1396-2007 | 2007-06-01 | French | Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications |
| 423 | AFNOR NF EN 1426-2007 | 2007-06-01 | French | Bitumen and bituminous binders - Determination of needle penetration |
| 424 | AFNOR NF EN 1999-1-4-2007 | 2007-06-01 | French | Eurocode 9 - Design of Aluminium Structures - Part 1-4 : cold-formed structural sheeting |
| 425 | AFNOR NF EN 61557-1-2007 | 2007-06-01 | French | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1 : general requirements |
| 426 | AFNOR NF EN 61557-2-2007 | 2007-06-01 | French | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2 : insulation resistance |
| 427 | AFNOR NF EN 61557-4-2007 | 2007-06-01 | French | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4 : resistance of earth connection and equipotential bonding |
| 428 | AFNOR NF EN 61557-5-2007 | 2007-06-01 | French | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5 : resistance to earth |
| 429 | AFNOR NF EN 61557-7-2007 | 2007-06-01 | French | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7 : phase sequence |
| 430 | AFNOR NF C32-102-9-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 9 : single core halogen-free non-sheathed cables for fixed wiring having low emission of smoke |
| 431 | AFNOR NF C32-102-10-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 10 : EPR insulated and polyurethane sheathed flexible cables |
| 432 | AFNOR NF C32-102-11-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 11 : EVA cords and flexible cables |
| 433 | AFNOR NF C32-102-12-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 12 : heat resistant EPR cords and flexible cables |
| 434 | AFNOR NF C32-102-13-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 13 : halogen-free flexible cables having low emission of smoke |
| 435 | AFNOR NF C32-102-14-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14 : cords for applications requiring high flexibility |
| 436 | AFNOR NF C32-102-15-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 15 : multicore cables insulated and sheathed with heat resistant silicone rubber |
| 437 | AFNOR NF C32-102-16-2007 | 2007-06-01 | French | Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 16 : water resistant polychloroprene or equivalent synthetic elastomer sheathed cables |
| 438 | AFNOR NF EN 15282-2007 | 2007-06-01 | French | Vitreous and porcelain enamels - Design of bolted steel tanks for the storage or treatment of water or municipal or industrial effluents and sludges |
| 439 | AFNOR NF EN 15111-2007 | 2007-06-01 | French | Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry) |
| 440 | AFNOR NF EN ISO 3037-2007 | 2007-06-01 | French | Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method) |
| 441 | AFNOR NF E63-124-2007 | 2007-06-01 | French | Tools for pressing - Ball guides - Ball cage |
| 442 | AFNOR NF E63-125-2007 | 2007-06-01 | French | Tools for pressing - Ball guides - Accessories |
| 443 | AFNOR NF E63-504-2007 | 2007-06-01 | French | Material of moulding and extrusion - Metal mould components - Straight guide pillars with cylindrical head |
| 444 | AFNOR NF E63-506-2007 | 2007-06-01 | French | Material of moulding and extrusion - Metal mould components - Shouldered guiding pillars with cylindrical head |
| 445 | AFNOR NF E63-508-2007 | 2007-06-01 | French | Material of moulding and extrusion - Metal mould components - Headed guides bushes |
| 446 | AFNOR NF E63-517-2007 | 2007-06-01 | French | Material of moulding and extrusion - Metal mould components - Location pins |
| 447 | AFNOR NF EN 14591-2-2007 | 2007-06-01 | French | Explosion prevention and protection in underground mines - Protective systems - Part 2 : passive water trough barriers |
| 448 | AFNOR NF EN 13606-4-2007 | 2007-06-01 | French | Health informatics - Electronic health record communication - Part 4 : security |
| 449 | AFNOR NF EN 14582-2007 | 2007-06-01 | French | Characterisation of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods |
| 450 | AFNOR NF EN 13850/IN1-2007 | 2007-06-01 | French | Postal services - Quality of service - Measurement of the transit time of end-to-end services for single priority mail and first class mail |
| 451 | AFNOR NF EN 15301-1-2007 | 2007-06-01 | French | Surfaces for sports areas - Part 1 : determination of rotational resistance |
| 452 | AFNOR NF EN 15301-2-2007 | 2007-06-01 | French | Surfaces for sports areas - Part 2 : determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory |
| 453 | AFNOR NF EN 15340-2007 | 2007-06-01 | French | Thermal spraying - Determination of shear load resistance of thermally sprayed coatings |
| 454 | AFNOR NF EN 15311-2007 | 2007-06-01 | French | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| 455 | AFNOR NF EN 4057-304-2007 | 2007-06-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 304 : loop tensile strength at maximum working temperature |
| 456 | AFNOR NF EN 15306-2007 | 2007-06-01 | French | Surfaces for outdoor sports areas - Exposure of synthetic turf to simulated wear |
| 457 | AFNOR NF P98-282-2007 | 2007-06-01 | French | Tests relating to pavement - Waterproofing materials for structures - Measurement of adherence of materials to the substrate - Laboratory or in-situ testing at controlled tensile test speed |
| 458 | AFNOR NF EN ISO 10720-2007 | 2007-06-01 | French | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas |
| 459 | AFNOR NF EN 15341-2007 | 2007-06-01 | French | Maintenance - Maintenance Key Performance Indicators |
| 460 | AFNOR NF EN 15339-2-2007 | 2007-06-01 | French | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2 : gas control units |
| 461 | AFNOR NF EN ISO 14637-2007 | 2007-05-01 | French | Milk - Determination of urea content - Enzymatic method using difference in pH (Reference method) |
| 462 | AFNOR NF P98-335-2007 | 2007-05-01 | French | Urban pavements - Assembly of concrete paving blocks and flagstones, of terracotta paving blocks and of natural stone paving blocks and flagstones |
| 463 | AFNOR NF EN 4057-302-2007 | 2007-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 302 : flammability |
| 464 | AFNOR NF EN 62310-2-2007 | 2007-05-01 | French | Static transfer systems (STS) - Part 2 : electromagnetic compatibility (EMC) requirements |
| 465 | AFNOR NF EN 1005-5-2007 | 2007-05-01 | French | Safety of machinery - Human physical performance - Part 5 : risk assessment for repetitive handling at high frequency |
| 466 | AFNOR NF EN 1015-1/A1-2007 | 2007-05-01 | French | Methods of test for mortar for masonry - Part 1 : determination of particle size distribution (by sieve analysis) |
| 467 | AFNOR NF EN 4108-2007 | 2007-05-01 | French | Aerospace series - Wrenches, crow foot, attachment socket, socket drive |
| 468 | AFNOR NF EN 1015-2/A1-2007 | 2007-05-01 | French | Methods of test for mortar for masonry - Part 2 : bulk sampling of mortars and preparation of test mortars |
| 469 | AFNOR NF ISO 3859-2007 | 2007-05-01 | French | Inverse dovetail cutters and dovetail cutters with cylindrical shanks |
| 470 | AFNOR NF EN 624/A2-2007 | 2007-05-01 | French | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| 471 | AFNOR NF EN 1015-3/A2-2007 | 2007-05-01 | French | Methods of test for mortar for masonry - Part 3 : determination of consistence of fresh mortar (by flow table) |
| 472 | AFNOR NF EN 4109-2007 | 2007-05-01 | French | Aerospace series - Wrenches, face spanner |
| 473 | AFNOR NF ISO 1711-1-2007 | 2007-05-01 | French | Assembly tools for screw and nuts - Technical specifications - Part 1 : hand-operated wrenches and sockets |
| 474 | AFNOR NF EN 634-2-2007 | 2007-05-01 | French | Cement-bonded particleboards - Specifications - Part 2 : requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| 475 | AFNOR NF EN 4110-2007 | 2007-05-01 | French | Aerospace series - Wrenches, open end, box |
| 476 | AFNOR NF EN 1015-6/A1-2007 | 2007-05-01 | French | Methods of test for mortar for masonry - Part 6 : determination of bulk density of fresh mortar |
| 477 | AFNOR NF EN 1015-9/A1-2007 | 2007-05-01 | French | Methods of test for mortar for masonry - Part 9 : determination of workable life and correction time of fresh mortar |
| 478 | AFNOR NF E44-155-2007 | 2007-05-01 | French | Hydraulic pumps - Technical fabrication and inspection conditions for the supplies of steel castings |
| 479 | AFNOR NF EN 13480-8-2007 | 2007-05-01 | French | Metallic industrial piping - Part 8 : additional requirements for aluminium and aluminium alloy piping |
| 480 | AFNOR NF ISO 7975-2007 | 2007-05-01 | French | Passenger cars - Braking in a turn - Open-loop test method |
| 481 | AFNOR NF EN 4057-406-2007 | 2007-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 406 : locking device retention |
| 482 | AFNOR NF EN 1015-10/A1-2007 | 2007-05-01 | French | Methods of test for mortar for masonry - Part 10 : determination of dry bulk density of hardened mortar |
| 483 | AFNOR NF EN 1015-11/A1-2007 | 2007-05-01 | French | Methods of test for mortar for masonry - Part 11 : determination of flexural and compressive strength of hardened mortar |
| 484 | AFNOR NF EN 60825-2/A1-2007 | 2007-05-01 | French | Safety of laser products - Part 2 : safety of optical fibre communication systems (OFCS) |
| 485 | AFNOR NF EN 60745-2-1/A11-2007 | 2007-05-01 | French | Hand-held motor-operated electric tools - Safety - Part 2-1 : particular requirements for drills and impact drills |
| 486 | AFNOR NF EN 4057-404-2007 | 2007-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 404 : low temperature installation |
| 487 | AFNOR NF EN 15336-2007 | 2007-05-01 | French | Adhesives - Determination of the time to rupture of bonded joints under static load |
| 488 | AFNOR NF ISO 18692-2007 | 2007-05-01 | French | Fibre ropes for offshore station keeping - Polyester |
| 489 | AFNOR NF EN 15529-2007 | 2007-05-01 | French | Derivatives from coal pyrolysis - Teminology |
| 490 | AFNOR NF EN 14236-2007 | 2007-05-01 | French | Ultrasonic domestic gas meters |
| 491 | AFNOR NF ISO 15917-2007 | 2007-05-01 | French | Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions |
| 492 | AFNOR NF EN 4057-402-2007 | 2007-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 402 : life cycle |
| 493 | AFNOR NF EN 4057-401-2007 | 2007-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 401 : loop tensile strength |
| 494 | AFNOR NF ISO 2351-1-2007 | 2007-05-01 | French | Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws |
| 495 | AFNOR NF EN 4057-307-2007 | 2007-05-01 | French | Aerospace series - Cable ties for harnesses - Test methods - Part 307 : resistance to ultra violet radiation |
| 496 | AFNOR XP S61-547-2007 | 2007-05-01 | French | Firefighting equipment - Particular complementary dispositions for turntable ladders |
| 497 | AFNOR FD D90-217-2007 | 2007-05-01 | French | Quilts or similar articles - Quilts or similar articles for children's beds - Design and use recommendations |
| 498 | AFNOR NF EN 1993-1-1/NA-2007 | 2007-05-01 | French | Eurocode 3 - Design of steel structures - Part 1-1 : general rules and rules for buildings - National Annex to NF EN 1993-1-1:2005 - General rules and rules for buildings |
| 499 | AFNOR NF P90-312-2007 | 2007-05-01 | French | Landing equipment for artificial climbing structures (ACS) with protection points - Safety requirements and test methods |
| 500 | AFNOR NF EN ISO 9999-2007 | 2007-05-01 | French | Assistive products for persons with disability - Classification and terminology |
|