| Pos | standard Number | publication date | Language | Description |
| 1 | AFNOR NF EN 13659/IN1-2008 | 2008-11-01 | French | Shutters - Performance requirements including safety |
| 2 | AFNOR NF EN 13659+A1-2008 | 2008-11-01 | French | Shutters - Performance requirements including safety |
| 3 | AFNOR NF EN 15268-2008 | 2008-11-01 | French | Petrol filling stations - Safety requirements for the construction and submersible pump assemblies |
| 4 | AFNOR XP P18-458-2008 | 2008-11-01 | French | Tests for hardened concrete - Accelerated carbonation test - Measurement of the thickness of carbonated concrete |
| 5 | AFNOR NF EN 80000-13-2008 | 2008-11-01 | French | Quantities and units - Part 13 : information science and technology |
| 6 | AFNOR NF EN 61000-3-3-2008 | 2008-11-01 | French | Electromagnetic compatibility (EMC) - Part 3-3 : limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current inferior or equal 16 A per phase and not subject to conditional connection |
| 7 | AFNOR NF EN ISO 15548-3-2008 | 2008-11-01 | French | Non-destructive testing - Equipment for eddy current examination - Part 3 : system characteristics and verification |
| 8 | AFNOR NF EN ISO 15548-2-2008 | 2008-11-01 | French | Non-destructive testing - Equipment for eddy current examination - Part 2 : probe characteristics and verification |
| 9 | AFNOR NF EN ISO 15548-1-2008 | 2008-11-01 | French | Non-destructive testing - Equipment for eddy current examination - Part 1 : instrument characteristics and verification |
| 10 | AFNOR NF EN 61280-2-2-2008 | 2008-11-01 | French | Fibre optic communication subsystem test procedures - Part 2-2 : digital systems - Optical eye pattern, waveform and extinction ratio measurement |
| 11 | AFNOR NF EN 3545-001-2008 | 2008-11-01 | French | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 掳C to 175 掳C - Part 001 : Technical specification |
| 12 | AFNOR NF EN 228-2008 | 2008-11-01 | French | Automotive fuels - Unleaded petrol - Requirements and test methods |
| 13 | AFNOR NF EN ISO 19134-2008 | 2008-11-01 | French | Geographic information - Location-based services - Multimodal routing and navigation |
| 14 | AFNOR NF ISO 2789-2008 | 2008-11-01 | French | Information and documentation - International library statistics |
| 15 | AFNOR XP T47-757-2008 | 2008-11-01 | French | End of life tyres (ELT) - Determination of the format of products from primary shredding - Method of evaluation of filaments |
| 16 | AFNOR NF EN ISO 4521-2008 | 2008-11-01 | French | Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods |
| 17 | AFNOR NF EN 13138-1-2008 | 2008-11-01 | French | Buoyant aids for swimming instruction - Part 1 : safety requirements and test methods for buoyant aids to be worn |
| 18 | AFNOR NF EN 589-2008 | 2008-11-01 | French | Automotive fuels - LPG - Requirements and test methods |
| 19 | AFNOR NF EN 62220-1-3-2008 | 2008-11-01 | French | Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3 : determination of the detective quantum efficiency - Detectors used in dynamic imaging |
| 20 | AFNOR NF EN ISO 27874-2008 | 2008-11-01 | French | Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods |
| 21 | AFNOR NF EN 15114+A1-2008 | 2008-11-01 | French | Textile floor coverings - Classification of textile floor coverings without pile |
| 22 | AFNOR NF EN 15114/IN1-2008 | 2008-11-01 | French | Textile floor coverings - Classification of textile floor coverings without pile |
| 23 | AFNOR NF EN 3745-603-2008 | 2008-11-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 603 : Nuclear radiation |
| 24 | AFNOR NF EN 415-7+A1-2008 | 2008-11-01 | French | Safety of packaging machines - Part 7 : group and secondary packaging machines |
| 25 | AFNOR NF EN 415-7/IN1-2008 | 2008-11-01 | French | Safety of packaging machines - Part 7 : group and secondary packaging machines |
| 26 | AFNOR NF EN 792-8+A1-2008 | 2008-11-01 | French | Hand-held non-electric power tools - Safety requirements - Part 8 : sanders and polishers |
| 27 | AFNOR NF EN 61512-3-2008 | 2008-11-01 | French | Batch control - Part 3 : general and site recipe models and representation |
| 28 | AFNOR NF EN ISO 5077-2008 | 2008-11-01 | French | Textiles - Determination of dimensional change in washing and drying |
| 29 | AFNOR NF EN ISO 6803-2008 | 2008-11-01 | French | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
| 30 | AFNOR NF EN 13531+A1-2008 | 2008-11-01 | French | Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements |
| 31 | AFNOR NF EN 14846-2008 | 2008-11-01 | French | Building hardware - Locks and latches - Electromechanically operated locks and striking plates - Requirements and test methods |
| 32 | AFNOR NF EN 813-2008 | 2008-11-01 | French | Personal fall protection equipment - Sit harnesses |
| 33 | AFNOR NF EN 54-25-2008 | 2008-11-01 | French | Fire detection and fire alarm systems - Part 25 : components using radio links |
| 34 | AFNOR NF EN 12012-3/IN1-2008 | 2008-11-01 | French | Plastics and rubber machines - Size reduction machines - Part 3 : safety requirements for shredders |
| 35 | AFNOR NF EN 815+A2-2008 | 2008-11-01 | French | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
| 36 | AFNOR NF EN 983/IN1-2008 | 2008-11-01 | French | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| 37 | AFNOR NF EN 983+A1-2008 | 2008-11-01 | French | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| 38 | AFNOR NF EN 3545-002-2008 | 2008-11-01 | French | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 掳C to 175 掳C - Part 002 : Specification of performance and contact arrangements |
| 39 | AFNOR NF EN 12012-3+A1-2008 | 2008-11-01 | French | Plastics and rubber machines - Size reduction machines - Part 3 : safety requirements for shredders |
| 40 | AFNOR NF EN 982/IN1-2008 | 2008-11-01 | French | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| 41 | AFNOR NF EN 815/IN2-2008 | 2008-11-01 | French | Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements |
| 42 | AFNOR NF EN 12549/IN1-2008 | 2008-11-01 | French | Acoustics - Noise test code for fastener driving tools - Engineering method |
| 43 | AFNOR NF EN 982+A1-2008 | 2008-11-01 | French | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| 44 | AFNOR NF EN 302194-1-2008 | 2008-11-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Navigation radar used on inland waterways - Part 1 : technical characteristics and methods of measurement (V1.1.2) |
| 45 | AFNOR NF EN 1504-9-2008 | 2008-11-01 | French | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9 : general principles for the use of products and systems |
| 46 | AFNOR NF EN 12549+A1-2008 | 2008-11-01 | French | Acoustics - Noise test code for fastener driving tools - Engineering method |
| 47 | AFNOR NF EN 12920+A1-2008 | 2008-11-01 | French | Characterization of waste - Methodology for the Determination of the leaching behaviour of waste under specified conditions |
| 48 | AFNOR NF EN 12012-2/IN2-2008 | 2008-11-01 | French | Plastics and rubber machines - Size reduction machines - Part 2 : safety requirements for strand pelletisers |
| 49 | AFNOR NF EN 13531/IN1-2008 | 2008-11-01 | French | Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements |
| 50 | AFNOR NF EN 981/IN1-2008 | 2008-11-01 | French | Safety of machinery - System of auditory and visual danger and information signals |
| 51 | AFNOR NF EN 981+A1-2008 | 2008-11-01 | French | Safety of machinery - System of auditory and visual danger and information signals |
| 52 | AFNOR NF EN 12517-2-2008 | 2008-11-01 | French | Non-destructive testing of welds - Part 2 : evaluation of welded joints in aluminium and its alloys by radiography - Acceptance levels |
| 53 | AFNOR NF EN 12012-2+A2-2008 | 2008-11-01 | French | Plastics and rubber machines - Size reduction machines - Part 2 : safety requirements for strand pelletisers |
| 54 | AFNOR NF EN 301929-2-2008 | 2008-11-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF transmitters and received as Coast Stations for GMDSS and other applications in the maritime mobile service - Part 2 : harmonized EN under article 3.2 of the R&TTE Directive (V1.2.1) |
| 55 | AFNOR NF EN 842+A1-2008 | 2008-11-01 | French | Safety of machinery - Visual danger signals - General requirements, design and testing |
| 56 | AFNOR NF E01-010-2008 | 2008-11-01 | French | Mechatronics - Vocabulary |
| 57 | AFNOR NF ISO 11500-2008 | 2008-11-01 | French | Hydraulic fluid power - Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| 58 | AFNOR NF EN ISO 9001-2008 | 2008-11-01 | French | Quality management systems - Requirements |
| 59 | AFNOR NF EN 842/IN1-2008 | 2008-11-01 | French | Safety of machinery - Visual danger signals - General requirements, design and testing |
| 60 | AFNOR NF EN ISO 11979-7-2008 | 2008-11-01 | French | Ophthalmic implants - Intraocular lenses - Part 7 : clinical investigations |
| 61 | AFNOR NF EN 13218+A1-2008 | 2008-11-01 | French | Machine tools - Safety - Stationary grinding machines |
| 62 | AFNOR NF EN 13218/IN1-2008 | 2008-11-01 | French | Machine tools - Safety - Stationary grinding machines |
| 63 | AFNOR NF EN 12012-1+A1-2008 | 2008-11-01 | French | Plastics and rubber machines - Size reduction machines - Part 1 : safety requirements for blade granulators |
| 64 | AFNOR NF EN 15093-2008 | 2008-11-01 | French | Safety of machinery - Safety requirements for hot flat rolling mills |
| 65 | AFNOR NF X30-442-2008 | 2008-11-01 | French | Waste - Laboratory determination of the permeability coefficient of a saturated material - Permeability tests using an oedometer at constant/variable hydraulic load |
| 66 | AFNOR NF EN ISO 10350-1-2008 | 2008-11-01 | French | Plastics - Acquisition and presentation of comparable single-point data - Part 1 : moulding materials |
| 67 | AFNOR NF EN 61646-2008 | 2008-11-01 | French | Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| 68 | AFNOR NF X30-441-2008 | 2008-11-01 | French | Waste - Laboratory determination of the permeability coefficient of a saturated material - Permeability tests using a rigid wall permeameter at constant/variable hydraulic head |
| 69 | AFNOR NF ISO 7267-1-2008 | 2008-11-01 | French | Rubber-covered rollers - Determination of apparent hardness - Part 1 : IRHD method |
| 70 | AFNOR NF EN 3327-2008 | 2008-11-01 | French | Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification : 1 275 MPa/650 掳C |
| 71 | AFNOR NF EN 12016/IN1-2008 | 2008-11-01 | French | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| 72 | AFNOR NF EN ISO 2867-2008 | 2008-11-01 | French | Earth-moving machinery - Access systems |
| 73 | AFNOR NF EN 3633-2008 | 2008-11-01 | French | Aerospace series - Installation hole for fluid fittings, flanged |
| 74 | AFNOR NF EN ISO 17491-4-2008 | 2008-11-01 | French | Protective clothing - Test methods for clothing providing protection against chemicals - Part 4 : determination of resistance to penetration by a spray of liquid (spray test) |
| 75 | AFNOR NF EN 12016+A1-2008 | 2008-11-01 | French | Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
| 76 | AFNOR NF EN 12882-2008 | 2008-11-01 | French | Conveyor belts for general purpose use - Electrical and flammability safety requirements |
| 77 | AFNOR NF EN ISO 17491-3-2008 | 2008-11-01 | French | Protective clothing - Test methods for clothing providing protection against chemicals - Part 3 : determination of resistance to penetration by a jet of liquid (Jet Test) |
| 78 | AFNOR NF ISO 22303-2008 | 2008-11-01 | French | Tobacco - Determination of tobacco specific nitrosamines - Method using buffer extraction |
| 79 | AFNOR NF EN 13561+A1-2008 | 2008-11-01 | French | External blinds - Performance requirements including safety |
| 80 | AFNOR NF EN 792-11+A1-2008 | 2008-11-01 | French | Hand-held non-electric power tools - Safety requirements - Part 11 : nibblers and shears |
| 81 | AFNOR NF EN 792-11/IN1-2008 | 2008-11-01 | French | Hand-held non-electric power tools - Safety requirements - Part 11 : nibblers and shears |
| 82 | AFNOR NF ISO 7206-1-2008 | 2008-11-01 | French | Implants for surgery - Partial and total hip joint prostheses - Part 1 : classification and designation of dimensions |
| 83 | AFNOR NF EN 1301-2-2008 | 2008-11-01 | French | Aluminium and aluminium alloys - Drawn wire - Part 2 : mechanical properties |
| 84 | AFNOR NF P84-705-2008 | 2008-11-01 | French | Geosynthetic barriers - Determination of the swelling, flow and permeability characteristics of geosysnthetic clay liners (GCL) using an oedopermeameter - Characterisation test and performance test |
| 85 | AFNOR NF EN ISO 6145-10-2008 | 2008-11-01 | French | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10 : permeation method |
| 86 | AFNOR NF ISO 7267-2-2008 | 2008-11-01 | French | Rubber-covered rollers - Determination of apparent hardness - Part 2 : Shore-type durometer method |
| 87 | AFNOR NF EN 13561/IN1-2008 | 2008-11-01 | French | External blinds - Performance requirements including safety |
| 88 | AFNOR NF EN ISO 6145-11-2008 | 2008-11-01 | French | Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11 : electrochemical generation |
| 89 | AFNOR NF EN 12012-4/IN1-2008 | 2008-11-01 | French | Plastics and rubber machines - Size reduction machines - Part 4 : safety requirements for agglomerators |
| 90 | AFNOR NF EN 15436-1-2008 | 2008-11-01 | French | Road service area maintenance equipment - part 1 : terminology |
| 91 | AFNOR NF EN 60751-2008 | 2008-11-01 | French | Industrial platinum resistance thermometers and platinum temperature sensors |
| 92 | AFNOR NF EN 1301-3-2008 | 2008-11-01 | French | Aluminium and aluminium alloys - Drawn wire - Part 3 : tolerances on dimensions |
| 93 | AFNOR NF EN 12920/IN1-2008 | 2008-11-01 | French | Characterization of waste - Methodology for the Determination of the leaching behaviour of waste under specified conditions |
| 94 | AFNOR NF EN 3545-009-2008 | 2008-11-01 | French | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 掳C to 175 掳C - Part 009 : protective cover for plug and receptacle - Product standard |
| 95 | AFNOR NF EN 1005-4/IN1-2008 | 2008-11-01 | French | Safety of machinery - Human physical performance - Part 4 : evaluation of working postures and movements in relation to machinery |
| 96 | AFNOR NF EN 1005-3/IN1-2008 | 2008-11-01 | French | Safety of machinery - Human physical performance - Part 3 : recommended force limits for machinery operation |
| 97 | AFNOR NF EN 1005-3+A1-2008 | 2008-11-01 | French | Safety of machinery - Human physical performance - Part 3 : recommended force limits for machinery operation |
| 98 | AFNOR NF EN 1005-2/IN1-2008 | 2008-11-01 | French | Safety of machinery - Human physical performance - Part 2 : manual handling of machinery and component parts of machinery |
| 99 | AFNOR NF EN 1005-2+A1-2008 | 2008-11-01 | French | Safety of machinery - Human physical performance - Part 2 : manual handling of machinery and component parts of machinery |
| 100 | AFNOR NF EN 12012-4+A1-2008 | 2008-11-01 | French | Plastics and rubber machines - Size reduction machines - Part 4 : safety requirements for agglomerators |
| 101 | AFNOR NF EN 12013/IN1-2008 | 2008-10-01 | French | Plastics and rubber machines - Internal mixers - Safety requirements |
| 102 | AFNOR AC X50-320-2008 | 2008-10-01 | French | Lean Production - Aid to small and medium-sized industrial enterprises - Collective approach in the Centre region |
| 103 | AFNOR NF EN 13059+A1-2008 | 2008-10-01 | French | Safety of industrial trucks - Test methods for measuring vibration |
| 104 | AFNOR NF EN 13059/IN1-2008 | 2008-10-01 | French | Safety of industrial trucks - Test methods for measuring vibration |
| 105 | AFNOR NF EN 13071-1-2008 | 2008-10-01 | French | Stationary waste containers up to 5000 l, top lifted bottom emptied - Part 1 : general requirements |
| 106 | AFNOR NF EN 13071-2-2008 | 2008-10-01 | French | Stationary waste containers up to 5000 l, top lifted bottom emptied - Part 2 : additional requirements for underground or partly underground systems |
| 107 | AFNOR BP P90-315-2008 | 2008-10-01 | French | Protective elements for in-ground, barrier-free, private or collective use swimming pools - Installation |
| 108 | AFNOR NF ISO 23909-2008 | 2008-10-01 | French | Soil quality - Preparation of laboratory samples from large samples |
| 109 | AFNOR NF EN 15603-2008 | 2008-10-01 | French | Energy performance of buildings - Overall energy use and definition of energy ratings |
| 110 | AFNOR NF EN ISO 21068-3-2008 | 2008-10-01 | French | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 3 : determination of nitrogen, oxygen and metallic and oxidic constituents |
| 111 | AFNOR NF EN ISO 21068-2-2008 | 2008-10-01 | French | Chemical analysis of silicon-carbide-containing raw materials and refractory products - Part 2 : determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| 112 | AFNOR NF EN ISO 21068-1-2008 | 2008-10-01 | French | Chemical analysis of silicon carbide- containing raw materials and refractory products - Part 1 : general information and sample preparation |
| 113 | AFNOR NF EN 1526+A1-2008 | 2008-10-01 | French | Safety of industrial trucks - Additional requirements for automated functions on trucks |
| 114 | AFNOR NF EN 1526/IN1-2008 | 2008-10-01 | French | Safety of industrial trucks - Additional requirements for automated functions on trucks |
| 115 | AFNOR NF ISO 7304-2-2008 | 2008-10-01 | French | Alimentary pasta produced from durum wheat semolina - Estimation of cooking quality by sensory analysis - Part 2 : Routine method |
| 116 | AFNOR NF EN 4165-003-2008 | 2008-10-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 掳C continuous - Part 003 : Modules series 2 and series 3 - Product standard |
| 117 | AFNOR NF EN 12013+A1-2008 | 2008-10-01 | French | Plastics and rubber machines - Internal mixers - Safety requirements |
| 118 | AFNOR NF EN 301842-4-2008 | 2008-10-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF air-ground Digital Link (VDL) Mode 4 radio equipment - Technical characteristics and methods of measurement for ground-based equipment - Part 4 : Point-to-point functions (V1.1.1) |
| 119 | AFNOR NF EN 301842-3-2008 | 2008-10-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF air-ground Digital Link (VDL) Mode 4 radio equipment - Technical characteristics and methods of measurement for ground-based equipment - Part 3 : additional broadcast aspects (V1.1.1) |
| 120 | AFNOR NF EN 1088/IN2-2008 | 2008-10-01 | French | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| 121 | AFNOR NF EN 1088+A2-2008 | 2008-10-01 | French | Safety of machinery - Interlocking devices associated with guards - Principles for design and selection |
| 122 | AFNOR NF EN ISO 11145-2008 | 2008-10-01 | French | Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols |
| 123 | AFNOR NF EN 1995-1-1/A1-2008 | 2008-10-01 | French | Eurocode 5 - Design of timber structures - Part 1-1 : General - Common rules and rules for buildings |
| 124 | AFNOR NF EN ISO 13753-2008 | 2008-10-01 | French | Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system |
| 125 | AFNOR NF EN 60318-6-2008 | 2008-10-01 | French | Electroacoustics - Simulators of human head and ear - Part 6 : mechanical coupler for the measurements of bone vibrators |
| 126 | AFNOR FD CEN/TR 15728-2008 | 2008-10-01 | French | Design and use of inserts for lifting and handling of precast concrete - Elements |
| 127 | AFNOR NF EN ISO 13849-2-2008 | 2008-10-01 | French | Safety of machinery - Safety-related parts of control systems - Part 2 : validation |
| 128 | AFNOR NF EN ISO 13849-1-2008 | 2008-10-01 | French | Safety of machinery - Safety-related parts of control systems - Part 1 : general principles for design |
| 129 | AFNOR NF EN 9101-2008 | 2008-10-01 | French | Aerospace series - Quality management systems - Assessment (based on EN ISO 9001: 2000) |
| 130 | AFNOR NF ISO 11620-2008 | 2008-10-01 | French | Information and documentation - Library performance indicators |
| 131 | AFNOR NF DTU 43.4 P2-2008 | 2008-10-01 | French | Building works - Roofs made of load-bearing wood and wood product panels with waterproofing coverings - Part 2 : contract hill of special clauses |
| 132 | AFNOR NF DTU 43.4 P1-2-2008 | 2008-10-01 | French | Building works - Roofs made of load-bearing wood and wood product panels with waterproofing coverings - Part 1-2 : general criteria for selection of materials (GCM) |
| 133 | AFNOR NF DTU 43.4 P1-1-2008 | 2008-10-01 | French | Building works - Roofs made of load-bearing wood and wood product panels with waterproofing coverings - Part 1-1 : technical specifications |
| 134 | AFNOR NF DTU 43.4-2008 | 2008-10-01 | French | Building works - Roofs made of load-bearing wood and wood product panels with waterproofing coverings - Part 1-1 : technical specifications - Part 1-2 : general criteria for selection of materials (GCM) - Part 2 : contract hill of special clauses |
| 135 | AFNOR NF EN 15004-4-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 4 : physical properties and system design of gas extinguishing systems for HFC 125 extinguishant |
| 136 | AFNOR NF EN 15004-3-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 3 : physical properties and system design of gas extinguishing systems for HCFC Blend A extinguishant |
| 137 | AFNOR NF EN 15004-2-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 2 : physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant |
| 138 | AFNOR NF EN 15004-1-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 1 : design, installation and maintenance |
| 139 | AFNOR NF DTU 20.1 P4-2008 | 2008-10-01 | French | Building works - Small mansonry unit walls - Partitions and walls - Part 4 : calculation rules and minimum construction provisions |
| 140 | AFNOR NF EN 840-6/IN1-2008 | 2008-10-01 | French | Mobile waste containers - Part 6 : safety and health requirements |
| 141 | AFNOR NF EN 840-6+A1-2008 | 2008-10-01 | French | Mobile waste containers - Part 6 : safety and health requirements |
| 142 | AFNOR NF EN 15164-2008 | 2008-10-01 | French | Machines and plants for mining and tooling of natural stone - Safety - Requirements for chain and belt slotting machines |
| 143 | AFNOR NF EN 14398-2/IN2-2008 | 2008-10-01 | French | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing |
| 144 | AFNOR NF EN 14398-2+A2-2008 | 2008-10-01 | French | Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2 : design, fabrication, inspection and testing |
| 145 | AFNOR NF EN 14394/IN1-2008 | 2008-10-01 | French | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 掳C |
| 146 | AFNOR NF EN 14394+A1-2008 | 2008-10-01 | French | Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 掳C |
| 147 | AFNOR NF EN 15163-2008 | 2008-10-01 | French | Machines and installations for the exploitation and processing of natural stone - Safety - Requirements for diamond wire saws |
| 148 | AFNOR NF DTU 20.1 P3-2008 | 2008-10-01 | French | Building works - Small mansonry unit walls - Partitions and walls - Part 3 : guide for selection of site-dependent facade wall types |
| 149 | AFNOR NF DTU 20.1 P2-2008 | 2008-10-01 | French | Building works - Small mansonry unit walls - Partitions and walls - Part 2 : contract bill of special administrative model clauses |
| 150 | AFNOR NF DTU 20.1 P1-2-2008 | 2008-10-01 | French | Building works - Small mansonry unit walls - Partitions and walls - Part 1-2 : general criteria for selection of materials |
| 151 | AFNOR NF DTU 20.1 P1-1-2008 | 2008-10-01 | French | Building works - Small mansonry unit walls - Partitions and walls - Part 1-1 : contract bill of technical model clauses |
| 152 | AFNOR NF DTU 20.1-2008 | 2008-10-01 | French | Building works - Small mansonry unit walls - Partitions and walls - Part 1-1 : contract bill of technical model clauses - Part 1-2 : general criteria for selection of materials - Part 2 : contract bill of special administrative model clauses - Part 3 : guide for selection of site-dependent facade wall types - Part 4 : calculation rules and minimum construction provisions |
| 153 | AFNOR NF EN ISO 11117-2008 | 2008-10-01 | French | Gas cylinders - Valve protection caps and valve guards - Design, construction and tests |
| 154 | AFNOR NF EN 15452-2008 | 2008-10-01 | French | Fertilizers - Determination of chelating agents - Determination of iron chelated by o,p- EDDHA by reversed phase HPLC |
| 155 | AFNOR NF EN 15451-2008 | 2008-10-01 | French | Fertilizers - Determination of chelating agents - Determination of iron chelated by EDDHSA by ion pair chromatography |
| 156 | AFNOR NF ISO 9231-2008 | 2008-10-01 | French | Milk and milk products - Determination of benzoic acid and sorbic acid contents |
| 157 | AFNOR NF EN 15445-2008 | 2008-10-01 | French | Fugitive and diffuse emissions of common concern to industry sectors - Qualification of fugitive dust sources by Reverse Dispersion Modelling |
| 158 | AFNOR NF EN 12053/IN1-2008 | 2008-10-01 | French | Safety of industrial trucks - Test methods for measuring noise emissions |
| 159 | AFNOR NF EN ISO 11252-2008 | 2008-10-01 | French | Lasers and laser-related equipment - Laser device - Minimum requirements for documentation |
| 160 | AFNOR NF EN 12602-2008 | 2008-10-01 | French | Prefabricated reinforced components of autoclaved aerated concrete |
| 161 | AFNOR NF EN 13015/IN1-2008 | 2008-10-01 | French | Maintenance for lifts and escalators - Rules for maintenance instructions |
| 162 | AFNOR NF ISO 2781-2008 | 2008-10-01 | French | Rubber, vulcanized or thermoplastic - Determination of density - Modified by NF ISO 2781/A1:201010 (T46-030/A1) |
| 163 | AFNOR NF EN 12053+A1-2008 | 2008-10-01 | French | Safety of industrial trucks - Test methods for measuring noise emissions |
| 164 | AFNOR NF DTU 20.13 P2-2008 | 2008-10-01 | French | Building works - Small masonry partition walls - Part 2 : contract bill of special administrative model clauses |
| 165 | AFNOR XP E29-190-1-2008 | 2008-10-01 | French | Gas pressure regulators for service lines on distribution netwoks - Part 1 : type C Regulators |
| 166 | AFNOR XP G38-030-2008 | 2008-10-01 | French | Geotxtiles - Determination of the number of constrictions |
| 167 | AFNOR NF DTU 20.13 P1-2-2008 | 2008-10-01 | French | Building works - Small masonry partition walls - Part 1-2 : general criteria for selection of materials |
| 168 | AFNOR NF DTU 20.13 P1-1-2008 | 2008-10-01 | French | Building works - Small masonry partition walls - Part 1-1 : contract bill of technical model clauses |
| 169 | AFNOR NF DTU 20.13-2008 | 2008-10-01 | French | Building works - Small masonry partition walls - Part 1-1 : contract bill of technical model clauses - Part 1-2 : general criteria for selection of materials - Part 2 : contract bill of special administrative model clauses - Part 3 : memento |
| 170 | AFNOR NF EN ISO 10846-1-2008 | 2008-10-01 | French | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1 : principles and guidelines |
| 171 | AFNOR NF EN ISO 10846-2-2008 | 2008-10-01 | French | Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2 : direct method for determination of the dynamic stiffness of resilient supports for translatory motion |
| 172 | AFNOR NF EN 62311-2008 | 2008-10-01 | French | Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) |
| 173 | AFNOR NF EN 3733-108-2008 | 2008-10-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150掳C continuous - Part 108 : cable support boot - Product standard |
| 174 | AFNOR NF EN 3733-106-2008 | 2008-10-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150掳C continuous - Part 106 : receptacle connector dummy jam nut - Product standard |
| 175 | AFNOR NF EN 3733-105-2008 | 2008-10-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150掳C continuous - Part 105 : receptacle connector dummy two holes fixing - Product standard |
| 176 | AFNOR NF EN 3733-104-2008 | 2008-10-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150掳C continuous - Part 104 : receptacle connector dummy four holes fixing - Product standard |
| 177 | AFNOR NF EN 3733-103-2008 | 2008-10-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150掳C continuous - Part 103 : protective cover jam nut receptacle - Product standard |
| 178 | AFNOR NF EN 15316-4-5-2008 | 2008-10-01 | French | Heating systems in buldings - Method for calculation of system energy requirements and system efficiencies - Part 4-5 : space heating generation systems, the performance and quality of district heating and large volume systems |
| 179 | AFNOR NF EN 15316-4-3-2008 | 2008-10-01 | French | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3 : heat generation systems, thermal solar systems |
| 180 | AFNOR NF EN 15316-3-2-2008 | 2008-10-01 | French | Heating systems in buldings - Method for calculation of system energy requirements and system efficiencies - Part 3-2 : domestic hot water systems, distribution |
| 181 | AFNOR NF EN 15316-2-3-2008 | 2008-10-01 | French | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2.3 : space heating distribution systems |
| 182 | AFNOR NF K12-500-2008 | 2008-10-01 | French | Banking - Securities - Movement order for a financial instrument not authorised in the operations of a central depositary |
| 183 | AFNOR NF EN 14761/IN1-2008 | 2008-10-01 | French | Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick |
| 184 | AFNOR NF EN 14761+A1-2008 | 2008-10-01 | French | Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick |
| 185 | AFNOR NF EN ISO 16282-2008 | 2008-10-01 | French | Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature |
| 186 | AFNOR NF EN 302842-4-2008 | 2008-10-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment - Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment - Part 4 : Point-to-point functions (V1.2.1) |
| 187 | AFNOR NF EN 302842-3-2008 | 2008-10-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - VHF air-ground and air-air Digital Link (VDL) Mode 4 radio equipment - Technical characteristics and methods of measurement for aeronautical mobile (airborne) equipment - Part 3 : Additional broadcast aspects (V1.2.1) |
| 188 | AFNOR NF EN 3020-2008 | 2008-10-01 | French | Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286), silver plated - Classification : 1 100 MPa (at ambient temperature)/650 掳C |
| 189 | AFNOR NF EN 3019-2008 | 2008-10-01 | French | Aerospace series - Self-locking plate nuts, floating, two-lug, in heat resisting steel FE-PA92HT (A286) - Classification : 1 100 MPa (at ambient temperature)/650 掳C |
| 190 | AFNOR NF EN 3016-2008 | 2008-10-01 | French | Aerospace series - Washers countersunk, load spreading - Heat resisting steel |
| 191 | AFNOR NF EN 15500-2008 | 2008-10-01 | French | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| 192 | AFNOR NF EN 15498-2008 | 2008-10-01 | French | Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance |
| 193 | AFNOR NF EN 1612-2/IN1-2008 | 2008-10-01 | French | Plastics and rubber machines - Reaction moulding machines - Part 2 : safety requirements for reaction moulding plant |
| 194 | AFNOR NF EN 1612-2+A1-2008 | 2008-10-01 | French | Plastics and rubber machines - Reaction moulding machines - Part 2 : safety requirements for reaction moulding plant |
| 195 | AFNOR NF EN 1612-1/IN1-2008 | 2008-10-01 | French | Plastics and rubber machines - Reaction moulding machines - Part 1 : safety requirements for metering and mixing units |
| 196 | AFNOR NF EN 1612-1+A1-2008 | 2008-10-01 | French | Plastics and rubber machines - Reaction moulding machines - Part 1 : safety requirements for metering and mixing units |
| 197 | AFNOR NF EN 15527-2008 | 2008-10-01 | French | Characterization of waste - Determination of polycyclic aromatic hydrocarbons (PAH) in waste using gas chromatography mass spectrometry (GC/MS) |
| 198 | AFNOR NF EN 12198-3/IN1-2008 | 2008-10-01 | French | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3 : reduction of radiation by attenuation or screening |
| 199 | AFNOR NF EN 81-3/IN1-2008 | 2008-10-01 | French | Safety rules for the construction and installation of lifts - Part 3 : electric and hydraulic service lifts |
| 200 | AFNOR NF T54-951-2008 | 2008-10-01 | French | Plastics piping systems for drinking water supply - Polyethylene pipes (PE 80 and PE 100) - Organoleptic properties of pipes and compounds - Packaging, storage, handling and transportation of pipes |
| 201 | AFNOR NF EN 1097-5-2008 | 2008-10-01 | French | Tests for mechanical and physical properties of aggregates - Part 5 : determination of the water content by drying in a ventilated oven |
| 202 | AFNOR NF EN 81-3+A1-2008 | 2008-10-01 | French | Safety rules for the construction and installation of lifts - Part 3 : electric and hydraulic service lifts |
| 203 | AFNOR NF EN 13077-2008 | 2008-10-01 | French | Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B |
| 204 | AFNOR NF EN 12198-3+A1-2008 | 2008-10-01 | French | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3 : reduction of radiation by attenuation or screening |
| 205 | AFNOR NF EN 13015+A1-2008 | 2008-10-01 | French | Maintenance for lifts and escalators - Rules for maintenance instructions |
| 206 | AFNOR NF EN ISO 11554-2008 | 2008-10-01 | French | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics |
| 207 | AFNOR NF U44-095/A1-2008 | 2008-10-01 | French | Organic soil improvers - Composts containing substances essential to agricultural, stanning from water treatment |
| 208 | AFNOR FD CEN/TR 10261-2008 | 2008-10-01 | French | Iron and steel - Review of available methods of chemical analysis |
| 209 | AFNOR NF EN 60432-3/A2-2008 | 2008-10-01 | French | Incandescent lamps - Safety specifications - Part 3 : tungsten-halogen lamps (non-vehicle) |
| 210 | AFNOR FD CEN/TS 15730-2008 | 2008-10-01 | French | Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufactures |
| 211 | AFNOR XP ISO/TS 22595-2-2008 | 2008-10-01 | French | Dentistry - Plant area equipment - Part 2 : compressor systems |
| 212 | AFNOR XP P84-523-2008 | 2008-10-01 | French | Geomembranes - Geomembranes lining system - Determination of the indentation resistance under hydrostatic load |
| 213 | AFNOR XP P84-700-2008 | 2008-10-01 | French | Geosynthetic barriers - General - Definitions |
| 214 | AFNOR XP P98-502-2008 | 2008-10-01 | French | Roads traffic signs - T2, 2 et 3 (microsprismatic technology) decors for traffic signs - Performances, technical characteristics and specifications |
| 215 | AFNOR FD X50-797-2008 | 2008-10-01 | French | Availability of medical devices at home - Implementation of the service commitments for standard NF X50-796 |
| 216 | AFNOR XP P98-573-2008 | 2008-10-01 | French | Road traffic signs - mobile variable messages signs - General characteristics |
| 217 | AFNOR NF EN ISO 8537-2008 | 2008-10-01 | French | Sterile single-use syringes, with or without needle, for insulin |
| 218 | AFNOR NF DTU 20.13 P3-2008 | 2008-10-01 | French | Building works - Small masonry partition walls - Part 3 : memento |
| 219 | AFNOR NF EN ISO 16812-2008 | 2008-10-01 | French | Petroleum, petrochemical and natural gas industries - Shell-and-tube heat exchangers |
| 220 | AFNOR NF EN 12932-2008 | 2008-10-01 | French | Chemicals used for water treatment intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, dihydrate |
| 221 | AFNOR NF EN 12273-2008 | 2008-10-01 | French | Slurry surfacing - Requirements |
| 222 | AFNOR NF EN 12977-3-2008 | 2008-10-01 | French | Thermal solar systems and components - Custom built systems - Part 3 : performance test methods for solar water heater stores |
| 223 | AFNOR NF EN 12933-2008 | 2008-10-01 | French | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Trichloroisocyanuric acid |
| 224 | AFNOR NF EN ISO 4869-3-2008 | 2008-10-01 | French | Acoustics - Hearing protectors - Part 3 : measurement of insertion loss of ear-muff type protectors using an acoustic test fixture |
| 225 | AFNOR NF C33-009-3-2008 | 2008-10-01 | French | Electric cables - Accessories - Material characterisation - Part 3 : fingerprinting for heat shrinkable components for medium voltage applications from 3,6/6(7,2) kV up to 20,8/36(42) kV |
| 226 | AFNOR XP P16-003-2008 | 2008-10-01 | French | Works operation nearby engineering networks : prevention and consequences of injuries |
| 227 | AFNOR NF C33-009-4-2008 | 2008-10-01 | French | Electrical cables - Accessories - Material characterisation - Part 4 : fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36(42) kV |
| 228 | AFNOR NF EN 1650-2008 | 2008-10-01 | French | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic, and institutional areas - Test method and requirements (phase 2, step 1) |
| 229 | AFNOR XP CEN/TS 15731-2008 | 2008-10-01 | French | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at adapted hydration from commercial or test flours and test milling methodology |
| 230 | AFNOR XP CEN/TS 15754-2008 | 2008-10-01 | French | Animal feeding stuffs - Determination of sugar content - High performance exchange chromatographic method (HPAEC-PAD) |
| 231 | AFNOR NF EN 12672-2008 | 2008-10-01 | French | Chemicals used for treatment of water intended for human consumption - Potassium permanganate |
| 232 | AFNOR NF EN 15004-10-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 10 : physical properties and system design of gas extinguishing systems for IG-541 extinguishant |
| 233 | AFNOR NF EN 198-2008 | 2008-10-01 | French | Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods |
| 234 | AFNOR NF EN 12678-2008 | 2008-10-01 | French | Chemicals used for treatment of water intended for human consumption - Potassium peroxomonosulfate |
| 235 | AFNOR NF EN 60076-6-2008 | 2008-10-01 | French | Power transformers - Part 6 : reactors |
| 236 | AFNOR NF EN ISO 3471-2008 | 2008-10-01 | French | Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements |
| 237 | AFNOR NF EN 62429-2008 | 2008-10-01 | French | Reliability growth - Stress testing for early failures in unique complex systems |
| 238 | AFNOR NF EN 1041-2008 | 2008-10-01 | French | Information supplied by the manufacturer of medical devices |
| 239 | AFNOR NF EN 15598-2008 | 2008-10-01 | French | Textiles - Terry fabrics - Test method for the determination of the resistance to pile loop extraction |
| 240 | AFNOR NF EN 15688-2008 | 2008-10-01 | French | Fertilizers - Determination of urease inhibitor N-(n-butyl) thiophosphoric triamide (NBPT) using high-performance liquid chromatography (HPLC) |
| 241 | AFNOR NF EN ISO 6872-2008 | 2008-10-01 | French | Dentistry - Ceramic materials |
| 242 | AFNOR NF EN 15004-5-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 5 : physical properties and system design of gas extinguishing systems for HFC 227ea extinguishant |
| 243 | AFNOR NF EN 15004-6-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 6 : physical properties and system design of gas extinguishing systems for HFC 23 extinguishant |
| 244 | AFNOR NF ISO 16730-2008 | 2008-10-01 | French | Fire safety engineering - Assessment, verification and validation of calculation methods |
| 245 | AFNOR NF EN 1176-4-2008 | 2008-10-01 | French | Playground equipment and surfacing - Part 4 : additional specific safety requirements and test methods for cableways |
| 246 | AFNOR FD ISO/TR 25477-2008 | 2008-10-01 | French | Paper, board and pulps - Basic guidelines for image analysis measurements |
| 247 | AFNOR NF EN 1176-1-2008 | 2008-10-01 | French | Playground equipment and surfacing - Part 1 : general safety requirements and test methods |
| 248 | AFNOR NF EN 1176-5-2008 | 2008-10-01 | French | Playground equipment and surfacing - Part 5 : additional specific safety requirements and test methods for carousels |
| 249 | AFNOR NF EN 2399-2008 | 2008-10-01 | French | Aerospace series - Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) - Rm > or = 900 MPa - Bars for forged bolts - D < or = 25 mm |
| 250 | AFNOR NF EN ISO 4490-2008 | 2008-10-01 | French | Metallic powders - Determination of flow rate by means of a calibrated funnel (Hall flowmeter) |
| 251 | AFNOR NF EN ISO 9241-171-2008 | 2008-10-01 | French | Ergonomics of human-system interaction - Part 171 : guidance on software accessibility |
| 252 | AFNOR NF EN 15552-2008 | 2008-10-01 | French | Packaging - Complete, filled transport packages and unit loads - Performance testing schedules for common distribution chains |
| 253 | AFNOR NF ISO 6535-2008 | 2008-10-01 | French | Portable chain-saws - Chain brake performance |
| 254 | AFNOR NF EN ISO 24157-2008 | 2008-10-01 | French | Ophthalmic optics and instruments - Reporting aberrations of the human eye |
| 255 | AFNOR NF ISO 16702-2008 | 2008-10-01 | French | Workplace air quality - Determination of total organic isocyanate groups in air using the 1-(2-methoxyphenyl) piperazine and liquid chromatography |
| 256 | AFNOR NF EN 14908-3-2008 | 2008-10-01 | French | Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3 : Power Line Channel Specification |
| 257 | AFNOR NF ISO 8260-2008 | 2008-10-01 | French | Milk and milk products - Determination of organochlorine pesticides and polychlorobiphenyls - Method using capillary gas-liquid chromatography with electron-capture detection |
| 258 | AFNOR NF EN 1177-2008 | 2008-10-01 | French | Impact attenuating playground surfacing - Determination of critical fall height |
| 259 | AFNOR NF EN 14908-4-2008 | 2008-10-01 | French | Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4 : IP Communication |
| 260 | AFNOR NF EN 4626-002-2008 | 2008-10-01 | French | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 掳C to 125 掳C (cable dependent) - Flush contacts - Part 002 : specification of performance and contact arrangements |
| 261 | AFNOR NF EN 15004-7-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing systems - Part 7 : physical properties and system design of gas extinguishing systems for IG-01 extinguishant |
| 262 | AFNOR NF EN 4626-003-2008 | 2008-10-01 | French | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 掳C to 125 掳C (cable dependent) - Flush contacts - Part 003 : Adaptor for plug |
| 263 | AFNOR NF EN 4626-004-2008 | 2008-10-01 | French | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 掳C to 125 掳C (cable dependent) - Flush contacts - Part 004 : adaptor for receptacle |
| 264 | AFNOR NF ISO 16735-2008 | 2008-10-01 | French | Fire safety engineering - Requirements governing algebaic equations - Smoke layers |
| 265 | AFNOR NF EN 4626-101-2008 | 2008-10-01 | French | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 掳C to 125 掳C (cable dependent) - Flush contacts - Part 101 : optical contact (sub-assembly) for plug - Product standard |
| 266 | AFNOR NF EN 12926-2008 | 2008-10-01 | French | Chemicals used for treatment of water intended for human consumption - Sodium peroxodisulfate |
| 267 | AFNOR NF ISO 3525-2008 | 2008-10-01 | French | Oil of amyris ( Amyris balsamifera L.) |
| 268 | AFNOR NF EN 15004-8-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing system - Part 8 : physical properties and system design of gas extinguishing systems for IG-100 extinguishant |
| 269 | AFNOR NF EN 15004-9-2008 | 2008-10-01 | French | Fixed firefighting systems - Gas extinguishing - Part 9 : physical properties and system design of gas extinguishing systems for IG-55 extinguishant |
| 270 | AFNOR NF EN 12931-2008 | 2008-10-01 | French | Chemicals used for treatment of water intended for human consumption - Chemicals for emergency use - Sodium dichloroisocyanurate, anhydrous |
| 271 | AFNOR NF EN 1646-1/IN1-2008 | 2008-09-01 | French | Leisure accommodation vehicles - Motor caravans - Part 1 : habitation requirements relating to health and safety |
| 272 | AFNOR NF EN 1176-6-2008 | 2008-09-01 | French | Playground equipment and surfacing - Part 6 : additional specific safety requirements and test methods for rocking equipment |
| 273 | AFNOR NF EN 1176-10-2008 | 2008-09-01 | French | Playground equipment and surfacing - Part 10 : additional specific safety requirements and test methods for fully enclosed play equipment |
| 274 | AFNOR NF EN 1176-11-2008 | 2008-09-01 | French | Playground equipment and surfacing - Part 11 : additional specific safety requirements and test methods for spatial network |
| 275 | AFNOR NF EN 1028-1+A1-2008 | 2008-09-01 | French | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1 : classification - General and safety requirements |
| 276 | AFNOR NF X50-796-2008 | 2008-09-01 | French | Availability of medical devices at home - Service commitments |
| 277 | AFNOR NF EN 15585-2008 | 2008-09-01 | French | Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains and calculation of percentage of vitreous grains |
| 278 | AFNOR FD ISO /TR 22979-2008 | 2008-09-01 | French | Ophthalmic implants . Intraocular lenses . Guidance on assessment of the need for clinical investigation of intraocular lens design modifications |
| 279 | AFNOR NF X50-784-2008 | 2008-09-01 | French | Promotion of diversity - Human Resources policy for the promotion of diversity and the prevention of discrimination - Criteria and commitments |
| 280 | AFNOR NF EN 1646-1+A1-2008 | 2008-09-01 | French | Leisure accommodation vehicles - Motor caravans - Part 1 : habitation requirements relating to health and safety |
| 281 | AFNOR NF EN 14466/IN1-2008 | 2008-09-01 | French | Fire fighting pumps - Portable pumps - Safety and performance requirements, tests |
| 282 | AFNOR NF EN 14466+A1-2008 | 2008-09-01 | French | Fire fighting pumps - Portable pumps - Safety and performance requirements, tests |
| 283 | AFNOR NF EN ISO 27799-2008 | 2008-09-01 | French | Health informatics - Information security management in health using ISO/IEC 27002 |
| 284 | AFNOR NF EN ISO 1179-4-2008 | 2008-09-01 | French | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4 : stud ends for general use only with metal-to-metal sealing (type B) |
| 285 | AFNOR NF EN 1028-1/IN1-2008 | 2008-09-01 | French | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1 : classification - General and safety requirements |
| 286 | AFNOR NF EN ISO 1179-2-2008 | 2008-09-01 | French | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2 : heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| 287 | AFNOR NF EN ISO 1179-1-2008 | 2008-09-01 | French | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1 : threaded ports |
| 288 | AFNOR NF EN 4300-2008 | 2008-09-01 | French | Aerospace series - Identification marking of engine items - Design standard |
| 289 | AFNOR NF EN ISO 21415-2-2008 | 2008-09-01 | French | Wheat and wheat flour - Gluten content - Part 2 : determination of wet gluten by mechanical means |
| 290 | AFNOR CWA 15884-2008 | 2008-09-01 | French | Environmental technology verification - Soil and groundwater site characterization, monitoring and remediation technologies |
| 291 | AFNOR NF EN 200-2008 | 2008-09-01 | French | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| 292 | AFNOR NF EN 3747-2008 | 2008-09-01 | French | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification |
| 293 | AFNOR NF EN 80000-6-2008 | 2008-09-01 | French | Quantities and units - Part 6 : electromagnetism |
| 294 | AFNOR NF EN 3660-022-2008 | 2008-09-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 022 : cable outlet, style A, straight, composite, unsealed, with cable tie strain relief - Product standard |
| 295 | AFNOR NF EN 1645-1/IN1-2008 | 2008-09-01 | French | Leisure accommodation vehicles - Caravans - Part 1 : habitation requirements relating to health and safety |
| 296 | AFNOR NF EN 15275-2008 | 2008-09-01 | French | Structural adhesives - Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures |
| 297 | AFNOR NF EN 3660-023-2008 | 2008-09-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 023 : cable outlet, style A, 90掳, composite, unsealed, with cable tie strain relief - Product standard |
| 298 | AFNOR NF EN 3660-024-2008 | 2008-09-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 024 : grommet nut, style A, composite - Product standard |
| 299 | AFNOR NF EN 3745-602-2008 | 2008-09-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602 : toxicity |
| 300 | AFNOR NF ISO 17616-2008 | 2008-09-01 | French | Soil quality - Guidance for the choice and evaluation of bioassays for ecotoxicological characterization of soils and soil material |
| 301 | AFNOR NF EN 1647/IN1-2008 | 2008-09-01 | French | Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety |
| 302 | AFNOR NF EN 1647+A1-2008 | 2008-09-01 | French | Leisure accommodation vehicles - Caravan holiday homes - Habitation requirements relating to health and safety |
| 303 | AFNOR NF EN 1645-1+A1-2008 | 2008-09-01 | French | Leisure accommodation vehicles - Caravans - Part 1 : habitation requirements relating to health and safety |
| 304 | AFNOR NF EN 289+A1-2008 | 2008-09-01 | French | Plastics and rubber machines - Presses - Safety requirements |
| 305 | AFNOR NF EN 289/IN1-2008 | 2008-09-01 | French | Plastics and rubber machines - Presses - Safety requirements |
| 306 | AFNOR NF EN 12697-12-2008 | 2008-09-01 | French | Bituminous mixtures - Test methods for hot mix asphalt - Part 12 : determination of the water sensitivity of bituminous specimens |
| 307 | AFNOR NF EN 60335-2-56/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-56 : particular requirements for projectors and similar appliances |
| 308 | AFNOR NF EN 60335-2-55/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-55 : particular requirements for electrical appliances for use with aquariums and garden ponds |
| 309 | AFNOR NF EN 60335-2-52/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-52 : particular requirements for oral hygiene appliances |
| 310 | AFNOR NF EN 60335-2-51/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-51 : particular requirements for stationary circulation pumps for heating and service water installations |
| 311 | AFNOR NF EN 60335-2-65/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-65 : particular requirements for air-cleaning appliances |
| 312 | AFNOR NF EN 60335-2-66/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-66 : particular requirements for water-bed heaters |
| 313 | AFNOR NF V03-741-2008 | 2008-09-01 | French | Cereals and cereal products - Maize products - Promatest - Method for assessment of heatsensitive proteins |
| 314 | AFNOR NF ISO 1382-2008 | 2008-09-01 | French | Rubber - Vocabulary |
| 315 | AFNOR NF EN ISO 9170-2-2008 | 2008-09-01 | French | Terminal units for medical gas pipeline systems - Part 2 : terminal units for anaesthetic gas scavenging systems |
| 316 | AFNOR NF V01-006-2008 | 2008-09-01 | French | Hygiene of food products - Place of the HACCP system and application of its principles for controllling the safety of food and animal feeding stuffs |
| 317 | AFNOR NF EN 2424-2008 | 2008-09-01 | French | Aerospace series - Marking of aerospace products |
| 318 | AFNOR NF V01-002-2008 | 2008-09-01 | French | Hygiene of food products - French-English glossary |
| 319 | AFNOR NF EN 15037-1-2008 | 2008-09-01 | French | Precast concrete products - Beam-and-block floor systems - Part 1 : beams |
| 320 | AFNOR NF EN 1991-1-7/NA-2008 | 2008-09-01 | French | Eurocode 1 : actions on structures - Part 1-7 : general actions - Accidental actions - National annex to NF EN 1991-1-7:2007 - General actions - Accidental actions |
| 321 | AFNOR NF EN 3915-2008 | 2008-09-01 | French | Aerospace series - Insert, thin wall, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (NI-P100HT, Inconel 718), for salvage of components - Classification : 1 275 MPa (at ambient temperature) / 550 掳C - Technical specification |
| 322 | AFNOR NF ISO 10381-8-2008 | 2008-09-01 | French | Soil quality - Sampling - Part 8 : guidance on sampling of stockpiles |
| 323 | AFNOR NF EN 15435-2008 | 2008-09-01 | French | Precast concrete products - Normal weight and lightweight concrete shuttering blocks - Product properties and performance |
| 324 | AFNOR NF EN 3636-2008 | 2008-09-01 | French | Aerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification : 900 MPa/650 掳C |
| 325 | AFNOR NF EN 1996-1-2/NA-2008 | 2008-09-01 | French | Eurocode 6 - Design of mansory structures - Part 1-2 : general rules - Structural fire design - National annex to NF EN 1996-1-2:2006 - General rules - Structural fire design |
| 326 | AFNOR NF EN 15092-2008 | 2008-09-01 | French | Building valves - Inline hot water supply tempering valves - Tests and requirements |
| 327 | AFNOR NF EN 60335-2-83/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-83 : particular requirements for heated gullies for roof drainage |
| 328 | AFNOR NF EN 60079-29-1-2008 | 2008-09-01 | French | Explosive atmospheres - Part 29-1 : gas detectors - Performance requirements of detectors for flammable gases |
| 329 | AFNOR NF P41-290-2008 | 2008-09-01 | French | Effect of materials on the quality of water intented for human consumption - Cytotoxicity measurement method |
| 330 | AFNOR NF EN 50504-2008 | 2008-09-01 | French | Validation of arc welding equipment |
| 331 | AFNOR NF EN ISO 217-2008 | 2008-09-01 | French | Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
| 332 | AFNOR NF EN ISO 1179-3-2008 | 2008-09-01 | French | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3 : light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
| 333 | AFNOR NF EN ISO 20848-1-2008 | 2008-09-01 | French | Packaging - Plastic drums - Part 1 : removable head (open head) drums with a nominal capacity of 113,6 l to 220 l |
| 334 | AFNOR NF EN ISO 20848-2-2008 | 2008-09-01 | French | Packaging - Plastics drums - Part 2 : non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l |
| 335 | AFNOR NF EN ISO 20848-3-2008 | 2008-09-01 | French | Packaging - Plastics drums - Part 3 : plug/bung closure systems for plastic drums with a nominal capacity of 113,6 l to 220 l |
| 336 | AFNOR NF EN ISO 21003-1-2008 | 2008-09-01 | French | Multilayer piping systems for hot and cold water installations inside buildings - Part 1 : general |
| 337 | AFNOR NF EN 60335-2-3/A2-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-3 : particular requirements for electric irons |
| 338 | AFNOR NF EN ISO 11064-5-2008 | 2008-09-01 | French | Ergonomic design of control centres - Part 5 : displays and controls |
| 339 | AFNOR NF EN 60335-2-82/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-82 : particular requirements for amusement machines and personal service machines |
| 340 | AFNOR AC P16-634-1-2008 | 2008-09-01 | French | Installation of non public sewage disposal systems (so-called self-contained systems) . Layout with compact zeolite filter bed . Part 1 : individual dwelling houses comprising up to 5 main rooms |
| 341 | AFNOR NF EN 3711-2008 | 2008-09-01 | French | Aerospace series - Wrench-double ended, bi-hexagonal, Straight, cranked, offset |
| 342 | AFNOR NF EN 60335-2-78/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-78 : particular requirements for outdoor barbecues |
| 343 | AFNOR NF EN ISO 21003-2-2008 | 2008-09-01 | French | Multilayer piping systems for hot and cold water installations inside buildings - Part 2 : pipes - Modified by NF EN ISO 21003-2/A1:201106 (T54-952-2/A1) |
| 344 | AFNOR NF EN ISO 13850-2008 | 2008-09-01 | French | Safety of machinery - Emergency stop - Principles for design |
| 345 | AFNOR NF EN ISO 21003-3-2008 | 2008-09-01 | French | Multilayer piping systems for hot and cold water installations inside buildings - Part 3 : fittings |
| 346 | AFNOR NF EN 3717-2008 | 2008-09-01 | French | Aerospace series - Tubes - Selection for engines fluid systems |
| 347 | AFNOR NF EN ISO 21003-5-2008 | 2008-09-01 | French | Multilayer piping systems for hot and cold water installations inside buildings - Part 5 : fitness for purpose of the system |
| 348 | AFNOR NF EN 13194-2008 | 2008-09-01 | French | Chemicals used for treatment of water intended for human consumption - Acetic acid |
| 349 | AFNOR NF D80-001-3-2008 | 2008-09-01 | French | Coffins - Performance specifications for inspecting the fitness for use of a coffin - Part 3 : characterisation of coffins and requirements for cremation |
| 350 | AFNOR NF EN 13176-2008 | 2008-09-01 | French | Chemicals used for treatment of water intended for human consumption - Ethanol |
| 351 | AFNOR NF EN 60335-2-101/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-101 : particular requirements for vaporizers |
| 352 | AFNOR NF EN 50500-2008 | 2008-09-01 | French | Measurement procedures of magnetic field levels generated by electronic and electrical apparatus in the railway environment with respect to human exposure |
| 353 | AFNOR NF EN 3728-2008 | 2008-09-01 | French | Aerospace series - Shaft-nuts, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| 354 | AFNOR NF EN 3729-2008 | 2008-09-01 | French | Aerospace series - Rings, threaded, self-locking, left-hand thread, in heat resisting steel FE-PA92HT (A286), silver plated |
| 355 | AFNOR AC P16-634-2-2008 | 2008-09-01 | French | Installation of non public sewage disposal systems (so-called self-contained systems) . Layout with compact zeolite filter bed . Part 2 : individual dwelling houses comprising 6 to 10 main rooms |
| 356 | AFNOR NF EN 508-3-2008 | 2008-09-01 | French | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3 : stainless steel |
| 357 | AFNOR NF ISO 23833-2008 | 2008-09-01 | French | Microbeam analysis - Electron probe microanalysis (EPMA) - Vocabulary |
| 358 | AFNOR NF EN 60335-2-105/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-105 : particular requirements for multifunctional shower cabinets |
| 359 | AFNOR NF EN 60335-2-6/A2-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-6 : particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
| 360 | AFNOR NF EN 13848-1+A1-2008 | 2008-09-01 | French | Railway applications - Track - Track geometry quality - Part 1 : characterisation of track geometry |
| 361 | AFNOR BP S74-801-2008 | 2008-09-01 | French | Personal Protective Equipment (PPE) - Maintenance of personal protective clothing |
| 362 | AFNOR NF EN 3635-2008 | 2008-09-01 | French | Aerospace series - Weld lip - Geometrical configuration |
| 363 | AFNOR NF EN 60079-29-2-2008 | 2008-09-01 | French | Explosive atmospheres - Part 29-2 : gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| 364 | AFNOR NF EN 13848-1/IN1-2008 | 2008-09-01 | French | Railway applications - Track - Track geometry quality - Part 1 : characterisation of track geometry |
| 365 | AFNOR NF EN 60335-2-85/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-85 : particular requirements for fabric steamers |
| 366 | AFNOR NF EN 14399-7-2008 | 2008-09-01 | French | High-strength structural bolting assemblies for preloading - Part 7 : system HR - Countersunk head bolt and nut assemblies |
| 367 | AFNOR NF EN 60335-2-84/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-84 : particular requirements for toilets |
| 368 | AFNOR NF EN 506-2008 | 2008-09-01 | French | Roofing products of metal sheet - Specification for self-supporting products of copper or zinc sheet |
| 369 | AFNOR XP CEN/TS 15465-2008 | 2008-09-01 | French | Cereals and cereal products - Durum wheat (T. durum Desf.) - General guidelines for instrumental methods measurement of semolina colour |
| 370 | AFNOR NF EN 50377-3-1-2008 | 2008-09-01 | French | Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1 : type SG terminated on IEC 60793-2-10 Category A1a, A1b or equivalent multimode fibre for category C |
| 371 | AFNOR NF EN ISO 13906-2008 | 2008-09-01 | French | Animal feeding stuffs - Determination of acid detergent fibre (ADF) and acid detergent lignin (ADL) contents |
| 372 | AFNOR NF EN 3709-2008 | 2008-09-01 | French | Aerospace series - Wrenches and sockets, bi-hexagonal - Technical specification |
| 373 | AFNOR NF EN ISO 15002-2008 | 2008-09-01 | French | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| 374 | AFNOR NF EN 60335-2-108-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-108 : particular requirements for electrolysers |
| 375 | AFNOR NF EN 60730-1/A2-2008 | 2008-09-01 | French | Automatic electrical controls for household and similar use - Part 1 : general requirements |
| 376 | AFNOR NF EN 508-1-2008 | 2008-09-01 | French | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1 : steel |
| 377 | AFNOR NF EN 3685-2008 | 2008-09-01 | French | Aerospace series - Bolts in heat resisting steel FE-PA2601 (A286) - Classification : 1 100 MPa/650 掳C - Technical specification |
| 378 | AFNOR NF EN ISO 9170-1-2008 | 2008-09-01 | French | Terminal units for medical gas pipeline systems - Part 1 : terminal units for use with compressed medical gases and vacuum |
| 379 | AFNOR NF EN 508-2-2008 | 2008-09-01 | French | Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2 : aluminium |
| 380 | AFNOR NF EN 3660-015-2008 | 2008-09-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 015 : cable outlet, style A, 45掳, unsealed, with cable tie strain relief - Product standard |
| 381 | AFNOR NF EN 60335-2-16/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-16 : particular requirements for food waste disposers |
| 382 | AFNOR NF EN ISO 20643-2008 | 2008-09-01 | French | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission |
| 383 | AFNOR NF EN 12644-1+A1-2008 | 2008-09-01 | French | Cranes - Information for use and testing - Part 1 : instructions |
| 384 | AFNOR XP D64-011-2008 | 2008-09-01 | French | Domestic and contract furniture - Mattresses for children cos - Safety requirements and test methods |
| 385 | AFNOR NF EN 3660-014-2008 | 2008-09-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 014 : cable outlet, style A, 90掳, unsealed, with cable tie strain relief - Product standard |
| 386 | AFNOR NF EN 10111-2008 | 2008-09-01 | French | Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions |
| 387 | AFNOR NF EN 60335-2-23/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-23 : particular requirements for appliances for skin or hair care |
| 388 | AFNOR NF EN 1367-6-2008 | 2008-09-01 | French | Tests for thermal and weathering properties of aggregates - Part 6 : determination of resistance to freezing and thawing in the presence of salt (NaCl) |
| 389 | AFNOR NF EN ISO 20182-2008 | 2008-09-01 | French | Refractory test-piece preparation - Gunning refractory panels by the pneumatic-nozzle mixing type guns |
| 390 | AFNOR NF EN ISO 3759-2008 | 2008-09-01 | French | Textiles - Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change |
| 391 | AFNOR NF EN 15199-3-2008 | 2008-09-01 | French | Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 3 : crude oil |
| 392 | AFNOR NF EN 1093-11/IN1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airbone hazardous substances - Part 11 : decontamination index |
| 393 | AFNOR NF EN 1093-11+A1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11 : decontamination index |
| 394 | AFNOR NF EN 1093-9/IN1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9 : pollutant concentration parameter, room method |
| 395 | AFNOR NF EN 1093-9+A1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9 : pollutant concentration parameter, room method |
| 396 | AFNOR NF EN 1093-8/IN1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8 : pollutant concentration parameter, test bench method |
| 397 | AFNOR NF EN 60335-2-12/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-12 : particular requirements for warming plates and similar appliances |
| 398 | AFNOR NF EN 1093-8+A1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8 : pollutant concentration parameter, test bench method |
| 399 | AFNOR NF EN 1093-7/IN1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7 : separation efficiency by mass, ducted outlet |
| 400 | AFNOR NF EN 1093-7+A1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7 : separation efficiency by mass, ducted outlet |
| 401 | AFNOR NF EN 1093-6/IN1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6 : separation efficiency by mass, unducted outlet |
| 402 | AFNOR NF EN 1093-6+A1-2008 | 2008-09-01 | French | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6 : separation efficiency by mass, unducted outlet |
| 403 | AFNOR NF EN ISO 15743-2008 | 2008-09-01 | French | Ergonomics of the thermal environment - cold workplaces - Risk assessment and management |
| 404 | AFNOR XP S94-091-2008 | 2008-09-01 | French | Implants for surgery - Validation of the cleaning of orthopaedic implants before final conditioning |
| 405 | AFNOR NF EN 12644-1/IN1-2008 | 2008-09-01 | French | Cranes - Information for use and testing - Part 1 : instructions |
| 406 | AFNOR NF EN 60335-2-26/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-26 : particular requirements for clocks |
| 407 | AFNOR NF EN 60335-2-10/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-10 : particular requirements for floor treatment machines and wet scrubbing machines |
| 408 | AFNOR NF EN 13094-2008 | 2008-09-01 | French | Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction |
| 409 | AFNOR NF EN 3660-013-2008 | 2008-09-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 013 : cable outlet, style A, straight, unsealed, with cable tie strain relief - Product standard |
| 410 | AFNOR NF EN 12644-2+A1-2008 | 2008-09-01 | French | Cranes - Information for use and testing - Part 2 : marking |
| 411 | AFNOR NF EN 60335-2-45/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-45 : particular requirements for portable heating tools and similar appliances |
| 412 | AFNOR NF EN 60335-2-28/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-28 : particular requirements for sewing machines |
| 413 | AFNOR NF EN 60335-2-44/A1-2008 | 2008-09-01 | French | Household and similar electrical appliances - Safety - Part 2-44 : particular requirements for ironers |
| 414 | AFNOR NF EN 3733-006-2008 | 2008-09-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 掳C continuous - Part 006 : receptacle, connector, jam nut fixing for cable according to EN 4532 - Product standard |
| 415 | AFNOR NF C01-461-2008 | 2008-09-01 | French | International Electrotechnical Vocabulary - Part 461 : electric cables |
| 416 | AFNOR NF EN ISO 5359-2008 | 2008-09-01 | French | Low-pressure hose assemblies for use with medical gases |
| 417 | AFNOR NF EN 3660-012-2008 | 2008-09-01 | French | Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 012 : Grommet nut, style A for EN 3372 - Product standard |
| 418 | AFNOR NF EN 12644-2/IN1-2008 | 2008-09-01 | French | Cranes - Information for use and testing - Part 2 : marking |
| 419 | AFNOR NF EN 3745-203-2008 | 2008-09-01 | French | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 203 : cable dimensions |
| 420 | AFNOR NF EN 1568-2-2008 | 2008-08-01 | French | Fire extinguishing media - Foam concentrates - Part 2 : specification for high expansion foam concentrates for surface application to water-immiscible liquids |
| 421 | AFNOR NF EN 3733-002-2008 | 2008-08-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 掳C continuous - Part 002 : list of product standards |
| 422 | AFNOR NF EN 13384-1/IN2-2008 | 2008-08-01 | French | Chimneys - Thermal and fluid dynamic calculation methods - Part 1 : chimneys serving one appliance |
| 423 | AFNOR NF EN ISO 16701-2008 | 2008-08-01 | French | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| 424 | AFNOR NF EN 1568-4-2008 | 2008-08-01 | French | Fire extinguishing media - Foam concentrates - Part 4 : specification for low expansion foam concentrates for surface application to water-miscible liquids |
| 425 | AFNOR NF EN 676/IN2-2008 | 2008-08-01 | French | Automatic forced draught burners for gaseous fuels |
| 426 | AFNOR NF EN 13172-2008 | 2008-08-01 | French | Thermal insulating products - Evaluation of conformity |
| 427 | AFNOR NF ISO 2330-2008 | 2008-08-01 | French | Fork-lift trucks - Fork arms - Technical characteristics and testing |
| 428 | AFNOR NF ISO 12082-2008 | 2008-08-01 | French | Processed cheese and processed cheese products - Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid |
| 429 | AFNOR NF EN 61326-3-2-2008 | 2008-08-01 | French | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2 : immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
| 430 | AFNOR NF EN 60904-3-2008 | 2008-08-01 | French | Photovoltaic devices - Part 3 : measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data |
| 431 | AFNOR NF EN 15316-4-6-2008 | 2008-08-01 | French | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6 : heat generation systems, photovoltaic systems |
| 432 | AFNOR NF EN 14805-2008 | 2008-08-01 | French | Chemicals used for treatment of water intended for human consumption - Sodium chloride for on site electrochlorination using non-membrane technology |
| 433 | AFNOR NF ISO 1740-2008 | 2008-08-01 | French | Milkfat products and butter - Determination of fat acidity (Reference method) |
| 434 | AFNOR NF EN 3298-2008 | 2008-08-01 | French | Aerospace series - Inserts, thin wall, self-locking - Installation and removal procedure |
| 435 | AFNOR NF EN 3294-2008 | 2008-08-01 | French | Aerospace series - Bolts, T-head, close tolerance in heat resisting nickel base alloy NI-P101HT (Waspaloy), uncoated for increased height nuts - Classification : 1 210 MPa/730 掳C |
| 436 | AFNOR NF EN 3293-2008 | 2008-08-01 | French | Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification : 1 275 MPa/650掳C |
| 437 | AFNOR NF ISO 23480-2008 | 2008-08-01 | French | Tools for pressing - Sliding plates |
| 438 | AFNOR NF EN 14342+A1-2008 | 2008-08-01 | French | Wood flooring - Characteristics, evaluation of conformity and marking |
| 439 | AFNOR NF EN ISO 16266-2008 | 2008-08-01 | French | Water quality - Detection and enumeration of Pseudomonas aeruginosa - Method by membrane filtration |
| 440 | AFNOR NF EN 3201-2008 | 2008-08-01 | French | Aeraospace series - Holes for metric threaded fasteners - Design standard |
| 441 | AFNOR NF EN 473-2008 | 2008-08-01 | French | Non destructive testing - Qualification and certification of NDT personnel - General principles |
| 442 | AFNOR NF EN ISO 11463-2008 | 2008-08-01 | French | Corrosion of metals and alloys - Evaluation of pitting corrosion |
| 443 | AFNOR NF EN 2941-2008 | 2008-08-01 | French | Aerospace series - Nickel alloy rivets - Technical specification |
| 444 | AFNOR NF EN 2898-2008 | 2008-08-01 | French | Aerospace series - Corrosion and heat resisting steel rivets - Technical specification |
| 445 | AFNOR NF EN 60034-3-2008 | 2008-08-01 | French | Rotating electrical machines - Part 3 : specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| 446 | AFNOR XP CEN/TS 15324-2008 | 2008-08-01 | French | Bitumen and bituminous binders - Determination of equiviscous temperature based on Low Shear Viscosity using a Dynamic Shear Rheometer in low frequency oscillation mode |
| 447 | AFNOR NF DTU 23.2 P2-2008 | 2008-08-01 | French | Building works - Precast hollow core slabs in concrete for floors - Part 2 : contract bill of special admnistrative model clauses |
| 448 | AFNOR NF EN 626-2+A1-2008 | 2008-08-01 | French | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2 : methodology leading to verification procedures |
| 449 | AFNOR NF EN 1568-1-2008 | 2008-08-01 | French | Fire extinguishing media - Foam concentrates - Part 1 : specification for medium expansion foam concentrates for surface application to water-immiscible liquids |
| 450 | AFNOR NF ISO 10190-2008 | 2008-08-01 | French | Motorcycle chains - Characteristics and test methods |
| 451 | AFNOR NF EN 1364-4-2008 | 2008-08-01 | French | Fire resistance tests for non-loadbearing elements - Part 4 : curtain walling - Part configuration |
| 452 | AFNOR NF EN 60229-2008 | 2008-08-01 | French | Electric cables - Tests on extruded oversheaths with a special protective function |
| 453 | AFNOR NF DTU 23.2 P3-2008 | 2008-08-01 | French | Building works - Precast hollow core slabs in concrete for floors - Part 3 : calculation rules |
| 454 | AFNOR NF C15-100/A1-2008 | 2008-08-01 | French | Low-voltage electrical installations |
| 455 | AFNOR NF ISO 23481-2008 | 2008-08-01 | French | Tools for pressing - Cam driver plates |
| 456 | AFNOR NF EN 60216-5-2008 | 2008-08-01 | French | Electrical insulating materials - Thermal endurance properties - Part 5 : determination of relative thermal endurance index (RTE) of an insulating material |
| 457 | AFNOR NF EN ISO 7539-9-2008 | 2008-08-01 | French | Corrosion of metals and alloys - Stress corrosion testing - Part 9 : preparation and use of pre-cracked specimens for tests under rising load or rising displacement |
| 458 | AFNOR FD CEN/TR 13688-2008 | 2008-08-01 | French | Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling |
| 459 | AFNOR NF EN ISO 13628-2-2008 | 2008-08-01 | French | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2 : unbonded flexible pipe systems for subsea and marine applications |
| 460 | AFNOR NF EN 1993-1-12/NA-2008 | 2008-08-01 | French | Eurocode 3 - Design of steel structures - Part 1-12 : additional rules for the extension of EN 1993 up to steel grades S 700 - National Annex to NF EN 1993-1-12:2007 - Additional rules for the extension of EN 1993 up to steel grades S 700 |
| 461 | AFNOR NF EN 60034-29-2008 | 2008-08-01 | French | Rotating electrical machines - Part 29 : equivalent loading and superposition techniques - Indirect testing to determine temperature rise |
| 462 | AFNOR NF EN 626-1/IN1-2008 | 2008-08-01 | French | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 1 : principles and specifications for machinery manufacturers |
| 463 | AFNOR NF ISO 5538-2008 | 2008-08-01 | French | Milk and milk products - Sampling - Inspection by attributes |
| 464 | AFNOR NF ISO 15819-2008 | 2008-08-01 | French | Cosmetics - Analytical methods - Nitrosamines : Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS |
| 465 | AFNOR NF ISO 5543-2008 | 2008-08-01 | French | Caseins and caseinates - Determination of fat content - Gravimetric method (Reference method) |
| 466 | AFNOR NF EN 626-2/IN1-2008 | 2008-08-01 | French | Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2 : methodology leading to verification procedures |
| 467 | AFNOR NF EN ISO 15792-1-2008 | 2008-08-01 | French | Welding consumables - Test methods - Part 1 : test methods for all-weld metal test specimens in steel, nickel and nickel alloys |
| 468 | AFNOR NF ISO 5544-2008 | 2008-08-01 | French | Caseins - Determination of "fixed ash" (Reference method) |
| 469 | AFNOR NF EN ISO 15750-3-2008 | 2008-08-01 | French | Packaging - Steel drums - Part 3 : inserted flange-type closure systems |
| 470 | AFNOR NF ISO 5545-2008 | 2008-08-01 | French | Rennet caseins and caseinates - Determination of ash (Reference method) |
| 471 | AFNOR NF DTU 23.2 P1-1-2008 | 2008-08-01 | French | Building works - Precast hollow core slabs in concrete for floors - Part 1-1 : contract bill of technical model clauses |
| 472 | AFNOR NF DTU 23.2 P1-2-2008 | 2008-08-01 | French | Building works - Precast hollow core slabs in concrete for floors - Part 1-2 : general criteria for selection of materials |
| 473 | AFNOR FD CEN/TR 10345-2008 | 2008-08-01 | French | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| 474 | AFNOR NF ISO 5548-2008 | 2008-08-01 | French | Caseins and caseinates - Determination of lactose content - Photometric method |
| 475 | AFNOR NF EN ISO 15750-1-2008 | 2008-08-01 | French | Packaging - Steel drums - Part 1 : removable head (open head) drums with a minimum total capacity of 208 l, 210 l and 216,5 l |
| 476 | AFNOR NF EN 4639-101-2008 | 2008-08-01 | French | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101 : optical contact for cable EN 4641-100 - Operating temperatures between -65 掳C and 125 掳C - Product standard |
| 477 | AFNOR NF ISO 7743-2008 | 2008-08-01 | French | Rubber, vulcanized or thermoplastic - Determination of compression stress-strain properties |
| 478 | AFNOR NF EN 12649-2008 | 2008-08-01 | French | Concrete compactors and smoothing machines - Safety |
| 479 | AFNOR NF EN 4639-102-2008 | 2008-08-01 | French | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102 : optical contact for cable EN 4641-102 - Operating temperatures between -55 掳C and 100 掳C - Product standard |
| 480 | AFNOR NF EN 13755-2008 | 2008-08-01 | French | Natural stone test methods - Determination of water absorption at atmospheric pressure |
| 481 | AFNOR NF EN 3733-003-2008 | 2008-08-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature 150 掳C continuous - Part 003 : Plug connector for cable according to EN 4532 - Product standard |
| 482 | AFNOR NF DTU 23.2-2008 | 2008-08-01 | French | Building works - Precast hollow core slabs in concrete for floors - Part 1-1 : contract bill of technical model clauses - Part 1-2 : general criteria for selection of materials - Part 2 : contract bill of special admnistrative model clauses - Part 3 : calculation rules |
| 483 | AFNOR NF ISO 18115/A2-2008 | 2008-08-01 | French | Surface chemical analysis - Vocabulary - Amendment 2 |
| 484 | AFNOR NF ISO 11868-2008 | 2008-08-01 | French | Heat-treated milk - Determination of lactulose content - Method using high-performance liquid chromatography |
| 485 | AFNOR NF EN ISO 23328-1-2008 | 2008-08-01 | French | Breathing system filters for anaesthetic and respiratory use - Part 1 : salt test method to assess filtration performance |
| 486 | AFNOR NF EN 1993-1-7/NA-2008 | 2008-08-01 | French | Eurocode 3 - Design of steel structures - Part 1-7 : Plated structures subject to out of plane loading - National Annex to NF EN 1993-1-7:2007 - Plated structures subject to out of plane loading |
| 487 | AFNOR NF EN ISO 3580-2008 | 2008-08-01 | French | Welding consumables - Covered electrodes for manual metal arc welding of creep-resisting steels - Classification |
| 488 | AFNOR NF EN ISO 22829-2008 | 2008-08-01 | French | Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1 000 Hz frequency |
| 489 | AFNOR NF EN 3733-007-2008 | 2008-08-01 | French | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 掳C continuous - Part 007 : ferrule (optical contact) for EN 4532 (200 mm/280 mm fibre) - Product standard |
| 490 | AFNOR NF EN ISO 15792-3-2008 | 2008-08-01 | French | Welding consumables - Test methods - Part 3 : classification testing of positional capacity and root penetration of welding consumables in a fillet weld |
| 491 | AFNOR NF EN 1470-2008 | 2008-08-01 | French | Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings |
| 492 | AFNOR NF ISO 976-2008 | 2008-08-01 | French | Rubber and plastics - Polymer dispersions and rubber latices - Determination of pH |
| 493 | AFNOR NF EN 14342/IN1-2008 | 2008-08-01 | French | Wood flooring - Characteristics, evaluation of conformity and marking |
| 494 | AFNOR NF EN 3909-2008 | 2008-08-01 | French | Aerospace series - Test fluids and test methods for electric components and sub-assemblies |
| 495 | AFNOR NF EN 1645-2-2008 | 2008-08-01 | French | Leisure accommodation vehicles - Caravans - Part 2 : user payload |
| 496 | AFNOR NF ISO 6668-2008 | 2008-08-01 | French | Green coffee - Preparation of samples for use in sensory analysis |
| 497 | AFNOR NF EN 61326-3-1-2008 | 2008-08-01 | French | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1 : immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
| 498 | AFNOR NF EN 4302-2008 | 2008-08-01 | French | Aerospace series - Open ring insert tool, square drive |
| 499 | AFNOR NF EN 2398-2008 | 2008-08-01 | French | Aerospace series - Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) - Rm > or = 900 MPa - Bars for machined bolts - D < or = 25 mm |
| 500 | AFNOR NF EN ISO 15750-2-2008 | 2008-08-01 | French | Packaging - Steel drums - Part 2 : non-removable head (tight head) drums with a minimum total capacity of 212 l, 216,5 l and 230 l |
|