| Pos | standard Number | publication date | Language | Description |
| 1 | AFNOR NF EN 13411-8-2011 | 2011-12-01 | French | Terminations for steel wire ropes - Safety - Part 8 : swage terminals and swaging |
| 2 | AFNOR NF EN 13611+A2-2011 | 2011-12-01 | French | Safety and control devices for gas burners and gas burning appliances - General requirements |
| 3 | AFNOR NF EN 13611/IN2-2011 | 2011-12-01 | French | Safety and control devices for gas burners and gas burning appliances - General requirements |
| 4 | AFNOR NF EN 13618-2011 | 2011-12-01 | French | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| 5 | AFNOR NF EN 13739-1-2011 | 2011-12-01 | French | Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 1 : requirements |
| 6 | AFNOR NF EN 13739-2-2011 | 2011-12-01 | French | Agricultural machinery - Solid fertilizer broadcasters and full width distributors - Environmental protection - Part 2 : test methods |
| 7 | AFNOR NF EN 13922-2011 | 2011-12-01 | French | Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels |
| 8 | AFNOR NF EN 300676-2-2011 | 2011-12-01 | French | Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceivers for the VHF aeronautical mobile service using amplitude modulation - Part 2 : harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive ( |
| 9 | AFNOR NF EN 301489-28-2011 | 2011-12-01 | French | Electromagnetic compatibility Radio spectrum Matters (ERM) - ElectroMagnetic compatibility (EMC) standard for radio equipment and services - Part 28 : specific conditions for wireless digital video links (V1.1.1) |
| 10 | AFNOR NF EN 301839-2-2011 | 2011-12-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Ultra Low Power Active Medical Implants (ULP-AMI) and Peripherals (ULP-AMI-P) operating in the frequency range 402 MHz to 405 MHz - Part 2 : Harmonized EN coverin |
| 11 | AFNOR NF EN 301908-2-2011 | 2011-12-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 2 : CDMA Direct Spread (UTRA FDD) User Equipment (UE) (V5.2.1) |
| 12 | AFNOR NF EN 301908-3-2011 | 2011-12-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 3 : CDMA Direct Spread (UTRA FDD) Base Stations (BS) (V5.2.1) |
| 13 | AFNOR NF EN 301908-6-2011 | 2011-12-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 6 : CDMA TDD (UTRA TDD) User Equipment (UE) (V5.2.1) |
| 14 | AFNOR NF EN 301908-7-2011 | 2011-12-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 7 : CDMA TDD (UTRA TDD) Base Stations (BS) (V5.2.1) |
| 15 | AFNOR NF EN 301908-11-2011 | 2011-12-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 11 : CDMA Direct Spread (UTRA FDD) (Repeaters) (V5.2.1) |
| 16 | AFNOR NF EN 301908-15-2011 | 2011-12-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 15 : Evolved Universal Terrestrial Radio Access (E-UTRA FDD) (Repeaters) (V5.2.1) |
| 17 | AFNOR NF EN 301908-18-2011 | 2011-12-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 18 : E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) (V5.2.1) |
| 18 | AFNOR NF X30-503-2011 | 2011-12-01 | French | Healthcare waste - Reduction of microbiological and mechanical risks from potentially infectious and other comparable healthcare waste by disinfection pretreatment appliances |
| 19 | AFNOR NF X43-303-2011 | 2011-12-01 | French | Stationary source emissions - Determination of ammonia (NH3) |
| 20 | AFNOR NF X43-317-2011 | 2011-12-01 | French | Stationary source emissions - Determination of acidic or alkaline pollution index of gaseous effluents |
| 21 | AFNOR NF L17-126-2011 | 2011-12-01 | French | Aerospace series - Rubber - Butadiene-acrylonitrile, hydrogenated - Class 26 - Characteristics |
| 22 | AFNOR NF EN 60793-1-31-2011 | 2011-12-01 | French | Optical fibres - Part 1-31 : measurement methods and test procedures - Tensile strength |
| 23 | AFNOR NF EN 60505-2011 | 2011-12-01 | French | Evaluation and qualification of electrical insulation systems |
| 24 | AFNOR NF C15-100 F22-2011 | 2011-12-01 | French | Fiche dinterprétation n° 15-100 F22 de la norme NF C15-100 de décembre 2002 |
| 25 | AFNOR CWA 16374-66-2011 | 2011-12-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 66 : Check Reader/Scanner Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmers Reference |
| 26 | AFNOR CWA 16374-64-2011 | 2011-12-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.20 - Part 64 : Cash Dispenser Device Class Interface Migration from Version 3.10 (CWA 15748) to Version 3.20 (this CWA) Programmers Reference |
| 27 | AFNOR UTE C96-029-1-2011 | 2011-12-01 | French | Group of electronic equipment obsolescence - A methodological guide sizing inventory end of life components and electronic subassemblies |
| 28 | AFNOR UTE C96-029-2011 | 2011-12-01 | French | Electronic components - Long duration storage of electronic components - Guide for implementation |
| 29 | AFNOR UTE C96-027-1-2011 | 2011-12-01 | French | Electronic equipment obsolescence - Guide applied obsolescence management |
| 30 | AFNOR UTE C96-027-2011 | 2011-12-01 | French | Obsolescence electronic components - Rules concerning the treatment of product discontinuance and replacement |
| 31 | AFNOR XP CEN/TS 15901-12-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 12 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip : the BV 11 and Saab friction tester (SFT) |
| 32 | AFNOR XP CEN/TS 15901-13-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 13 : procedure for determining the skid resistance of a pavement surface by measurement of a sideway force coefficient (SFCO) : the Odoliograph |
| 33 | AFNOR XP CEN/TS 16134-2011 | 2011-11-01 | French | Chimney terminals - General requirements and material independent test methods |
| 34 | AFNOR XP ISO/TS 29843-2-2011 | 2011-11-01 | French | Soil quality - Determination of soil microbial diversity - Part 2 : method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method |
| 35 | AFNOR XP CEN/TS 15901-3-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 3 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCA) : ADHERA |
| 36 | AFNOR NF EN ISO 13260-2011 | 2011-11-01 | French | Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading |
| 37 | AFNOR NF EN ISO 26304-2011 | 2011-11-01 | French | Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of high strength steels - Classification |
| 38 | AFNOR NF EN ISO 11990-1-2011 | 2011-11-01 | French | Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1 : tracheal tube shaft |
| 39 | AFNOR NF S97-114-2011 | 2011-11-01 | French | Medical compression hosiery - Technical specifications |
| 40 | AFNOR NF X50-100-2011 | 2011-11-01 | French | Value management - Functional analysis, basic characteristics - Functional analysis : Need (or external) functional analysis and technology/product (or internal) functional analysis - Requirements for deliverables and implementation approach |
| 41 | AFNOR NF EN ISO 14184-1-2011 | 2011-11-01 | French | Textiles - Determination of formaldehyde - Part 1 : free and hydrolized formaldehyde (water extraction method) |
| 42 | AFNOR XP CEN/TS 15901-4-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 4 : procedure for determining the skid resistance of pavements using a device with longitudinal controlled slip (LFCT) : Tatra Runway Tester (TRT) |
| 43 | AFNOR NF ISO 2328-2011 | 2011-11-01 | French | Fork-lift trucks - Hook-on type fork arms and fork arm carriages - Mounting dimensions |
| 44 | AFNOR NF EN ISO 10781-2011 | 2011-11-01 | French | Electronic Health Record-System Functional Model - Release 1.1 |
| 45 | AFNOR XP CEN/TS 15901-5-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 5 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK) : ROAR (Road Analyser and Recorder of Norsemeter) |
| 46 | AFNOR XP CEN/TS 15901-6-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 6 : procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS) : SCRIM |
| 47 | AFNOR NF ISO 2878-2011 | 2011-11-01 | French | Rubber, vulcanized or thermoplastic - Antistatic and conductive products - Determination of electrical resistance |
| 48 | AFNOR NF EN 13451-3-2011 | 2011-11-01 | French | Swimming pool equipment - Part 3 : additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
| 49 | AFNOR NF EN 13451-1-2011 | 2011-11-01 | French | Swimming pool equipment - Part 1 : general safety requirements and test methods |
| 50 | AFNOR NF ISO 3030-2011 | 2011-11-01 | French | Rolling bearings - Radial needle roller and cage assemblies - Boundary dimensions and tolerances |
| 51 | AFNOR NF EN ISO 14184-2-2011 | 2011-11-01 | French | Textiles - Determination of formaldehyde - Part 2 : released formaldehyde (vapour absorption method) |
| 52 | AFNOR NF EN ISO 13229-2011 | 2011-11-01 | French | Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value |
| 53 | AFNOR NF EN ISO 14271-2011 | 2011-11-01 | French | Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| 54 | AFNOR NF ISO 13161-2011 | 2011-11-01 | French | Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry |
| 55 | AFNOR NF ISO 36-2011 | 2011-11-01 | French | Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics |
| 56 | AFNOR XP CEN/TS 15901-9-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 9 : procedure for determining the skid resistance of a pavement surface by measurement of the longitudinal friction coefficient (LFCD) : DWWNL skid resistance trailer |
| 57 | AFNOR XP CEN/TS 15901-10-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 10 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSK) : the Skiddometer BV-8 |
| 58 | AFNOR NF ISO 8334-2011 | 2011-11-01 | French | Forestry machinery - Portable chain-saws - Determination of balance and maximum holding moment |
| 59 | AFNOR NF EN 16105-2011 | 2011-11-01 | French | Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water |
| 60 | AFNOR NF ISO 6493-2011 | 2011-11-01 | French | Animal feeding stuffs - Determination of starch content - Polarimetric method |
| 61 | AFNOR NF ISO 1817-2011 | 2011-11-01 | French | Rubber, vulcanized or thermoplastic - Determination of the effect of liquids |
| 62 | AFNOR XP CEN ISO/TS 16181-2011 | 2011-11-01 | French | Footwear - Critical substances potentially present in footwear and footwear components - Determination of phthalates in footwear materials |
| 63 | AFNOR NF EN ISO 17230-2011 | 2011-11-01 | French | Leather - Physical and mechanical tests -Determination of water penetration pressure |
| 64 | AFNOR NF EN ISO 17231-2011 | 2011-11-01 | French | Leather - Physical and mechanical tests - Determination of water repellency of garment leather |
| 65 | AFNOR XP CEN/TS 15901-7-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 7 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCG) : the GripTester |
| 66 | AFNOR XP CEN/TS 15901-8-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 8 : procedure for determining the skid resistance of a pavement surface by measurement of the sideway-force coefficient (SFCD) : SKM |
| 67 | AFNOR XP CEN/TS 15901-1-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 1 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal fixed slip ratio (LFCS): RoadSTAR |
| 68 | AFNOR XP CEN/TS 15901-2-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 2 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL) : ROAR (Road Analyser and Recorder of Norsemeter) |
| 69 | AFNOR NF EN 9101-2011 | 2011-11-01 | French | Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations |
| 70 | AFNOR NF ISO 6261-2011 | 2011-11-01 | French | Tool holders with cylindrical shank (boring bars) for indexable inserts - Designation |
| 71 | AFNOR XP CEN/TS 15901-11-2011 | 2011-11-01 | French | Road and airfield surface characteristics - Part 11 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal block measurement (LFCSR) : the SRM |
| 72 | AFNOR XP P18-463-2011 | 2011-11-01 | French | Concrete - Testing gas permeability on hardened concrete |
| 73 | AFNOR NF EN 16007-2011 | 2011-11-01 | French | Animal feeding stuffs - Determination of Ochratoxin A in animal feed by immunoaffinity column clean-up and High Performance Liquid Chromatography with fluorescence detection |
| 74 | AFNOR NF EN ISO 2009-2011 | 2011-11-01 | French | Slotted countersunk flat head screws - Product grade A |
| 75 | AFNOR NF EN 300392-3-2-2011 | 2011-11-01 | French | Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 3 : Interworking at the Inter-System Interface (ISI) - Sub-part 2 : Additional Network Feature Individual Call (ANF-ISIIC) (V1.4.1) |
| 76 | AFNOR NF EN 4660-005-2011 | 2011-11-01 | French | Aerospace series - Modular and Open Avionics Architectures - Part 005 : Software |
| 77 | AFNOR NF EN 13071-3-2011 | 2011-11-01 | French | Stationary waste containers up to 5000 l, top lifted and bottom emptied - Part 3 : recommended lifting connections |
| 78 | AFNOR NF EN 300392-12-21-2011 | 2011-11-01 | French | Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12 : supplementary services stage 3 - Sub-part 21 : ambience Listening (AL) (V1.4.1) |
| 79 | AFNOR NF EN ISO 5459-2011 | 2011-11-01 | French | Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum-systems |
| 80 | AFNOR NF EN 836/IN4-2011 | 2011-11-01 | French | Garden equipment - Powered lawnmowers - Safety |
| 81 | AFNOR NF EN 836+A4-2011 | 2011-11-01 | French | Garden equipment - Powered lawnmowers - Safety |
| 82 | AFNOR NF EN 26801/A1-2011 | 2011-11-01 | French | Rubber or plastics hoses - Determination of volumetric expansion - Amendment 1 : deletion of alcohol as pressurizing fluid |
| 83 | AFNOR NF EN 16016-4-2011 | 2011-11-01 | French | Non destructive testing - Radiation methods - Computed tomography - Part 4 : qualification |
| 84 | AFNOR NF EN 16016-3-2011 | 2011-11-01 | French | Non destructive testing - Radiation methods - Computed tomography - Part 3 : operation and interpretation |
| 85 | AFNOR NF EN 16016-2-2011 | 2011-11-01 | French | Non destructive testing - Radiation methods - Computed tomography - Part 2 : principle, equipment and samples |
| 86 | AFNOR NF EN 16016-1-2011 | 2011-11-01 | French | Non destructive testing - Radiation methods - Computed tomography - Part 1 : terminology |
| 87 | AFNOR NF EN 15376-2011 | 2011-11-01 | French | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
| 88 | AFNOR NF EN 15102+A1-2011 | 2011-11-01 | French | Decorative wall coverings - Roll and panel form |
| 89 | AFNOR NF EN 302931-2011 | 2011-11-01 | French | Intelligent Transport Systems (ITS) - Vehicular Communications - Geographical Area Definition (V1.1.1) |
| 90 | AFNOR NF EN ISO 1580-2011 | 2011-11-01 | French | Slotted pan head screws - Product grade A |
| 91 | AFNOR NF EN ISO 2010-2011 | 2011-11-01 | French | Slotted raised countersunk head screws - Product grade A |
| 92 | AFNOR NF EN 15102/IN1-2011 | 2011-11-01 | French | Decorative wall coverings - Roll and panel form |
| 93 | AFNOR NF EN 3280-2011 | 2011-11-01 | French | Aerospace series - Bearings, airframe rolling, rigid or self-aligning - Technical specification |
| 94 | AFNOR NF EN ISO 6224-2011 | 2011-11-01 | French | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification |
| 95 | AFNOR NF EN ISO 6887-4/A1-2011 | 2011-11-01 | French | Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4 : specific rules for the preparation of products other than milk and milk products, meat and me |
| 96 | AFNOR NF EN ISO 7045-2011 | 2011-11-01 | French | Pan head screws with type H or type Z cross recess - Product grade A |
| 97 | AFNOR NF EN ISO 7047-2011 | 2011-11-01 | French | Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A |
| 98 | AFNOR NF EN 16020-2011 | 2011-11-01 | French | Explosion diverters |
| 99 | AFNOR NF EN 267/IN1-2011 | 2011-11-01 | French | Automatic forced draught burners for liquid fuels |
| 100 | AFNOR NF EN 267+A1-2011 | 2011-11-01 | French | Automatic forced draught burners for liquid fuels |
| 101 | AFNOR NF EN 16117-1-2011 | 2011-11-01 | French | Copper and copper alloys - Determination of copper content - Part 1 : electrolytic determination of copper in materials with copper content less than 99,85 % |
| 102 | AFNOR CWA 16387-2011 | 2011-11-01 | French | Clean Harbours - Guidelines |
| 103 | AFNOR NF EN 1501-5-2011 | 2011-11-01 | French | Refuse collection vehicles - General requirements and safety requirements - Part 5 : lifting devices for refuse collection vehicles |
| 104 | AFNOR NF EN 4641-105-2011 | 2011-11-01 | French | Aerospace series - Cables, optical 125 µm diameter cladding - Part 105 : semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter - Product standard |
| 105 | AFNOR NF EN 300433-1-2011 | 2011-11-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Citizens Band (CB) radio equipment - Part 1 : technical characteristics and methods of measurement (V1.3.1) |
| 106 | AFNOR NF EN 300433-2-2011 | 2011-11-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Citizens Band (CB) radio equipment - Part 2: Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE Directive (V1.3.1) |
| 107 | AFNOR NF EN ISO 3994-2011 | 2011-11-01 | French | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification |
| 108 | AFNOR NF EN ISO 4671/A1-2011 | 2011-11-01 | French | Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1 : clarification of position at which outside diameter is measured |
| 109 | AFNOR NF EN 15413-2011 | 2011-11-01 | French | Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample |
| 110 | AFNOR BP X30-323-7-2011 | 2011-11-01 | French | General principles for an environmental communication on mass market products - Part 7 : methodology for the environmental impacts assesment of sports equipment racquets |
| 111 | AFNOR NF EN 15415-1-2011 | 2011-11-01 | French | Solid recovered fuels - Determination of particle size distribution - Part 1 : screen method for small dimension particles |
| 112 | AFNOR NF EN ISO 17654-2011 | 2011-11-01 | French | Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds |
| 113 | AFNOR NF EN 13463-5-2011 | 2011-11-01 | French | Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5 : protection by constructional safety c |
| 114 | AFNOR AC S52-413-2011 | 2011-11-01 | French | Managing health and safety in public swimming pools |
| 115 | AFNOR NF V18-111-2011 | 2011-11-01 | French | Animal feeding stuffs - Determination of water-insoluble vegetable cell walls content |
| 116 | AFNOR NF EN ISO 20846-2011 | 2011-11-01 | French | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method |
| 117 | AFNOR NF ISO 19706-2011 | 2011-11-01 | French | Guidelines for assessing the fire threat to people |
| 118 | AFNOR BP X30-323-8-2011 | 2011-11-01 | French | General principles for an environmental communication on mass market products - Part 8 : methodology for the environmental impact assesment of toilet paper |
| 119 | AFNOR NF ISO 18084-2011 | 2011-11-01 | French | Press tools for tablets - Punches and dies |
| 120 | AFNOR NF ISO 14409-2011 | 2011-11-01 | French | Ships and marine technology - Ship launching air bags |
| 121 | AFNOR NF EN ISO 17074-2011 | 2011-11-01 | French | Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame |
| 122 | AFNOR NF EN ISO 17071-2011 | 2011-11-01 | French | Leather - Physical and mechanical tests - Determination of fogging characteristics |
| 123 | AFNOR NF EN ISO 25139-2011 | 2011-11-01 | French | Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography |
| 124 | AFNOR NF EN ISO 50001-2011 | 2011-11-01 | French | Energy management systems - Requirements with guidance for use |
| 125 | AFNOR NF ISO 11357-3-2011 | 2011-11-01 | French | Plastics - Differential scanning calorimetry (DSC) - Part 3 : determination of temperature and enthalpy of melting and crystallization |
| 126 | AFNOR NF ISO 9467-2011 | 2011-11-01 | French | Forestry machinery - Portable chain-saws and brush-cutters - Exhaust system-caused fire risk |
| 127 | AFNOR NF EN ISO 11600/A1-2011 | 2011-11-01 | French | Building construction - Jointing products - Classification and requirements for sealants |
| 128 | AFNOR NF EN 693+A2-2011 | 2011-11-01 | French | Machine tools - Safety - Hydraulic presses |
| 129 | AFNOR NF EN ISO 3630-5-2011 | 2011-11-01 | French | Dentistry - Endodontic instruments - Part 5 : shaping and cleaning instruments |
| 130 | AFNOR NF EN ISO 12677-2011 | 2011-11-01 | French | Chemical analysis of refractory products by X-ray fluorescence (XRF) - Fused cast-bead method |
| 131 | AFNOR NF EN ISO 8536-1-2011 | 2011-11-01 | French | Infusion equipment for medical use - Part 1 : infusion glass bottles |
| 132 | AFNOR NF ISO 10677-2011 | 2011-11-01 | French | Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials |
| 133 | AFNOR NF EN ISO 8362-4-2011 | 2011-11-01 | French | Injection containers and accessories - Part 4 : injection vials made of moulded glass |
| 134 | AFNOR NF EN 693/IN2-2011 | 2011-11-01 | French | Machine tools - Safety - Hydraulic presses |
| 135 | AFNOR NF EN ISO 11591-2011 | 2011-11-01 | French | Small craft, engine-driven - Field of vision from helm position |
| 136 | AFNOR NF EN ISO 10943-2011 | 2011-11-01 | French | Ophthalmic instruments - Indirect ophthalmoscopes |
| 137 | AFNOR NF EN 15814-2011 | 2011-11-01 | French | Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements |
| 138 | AFNOR NF EN 2240-065-2011 | 2011-11-01 | French | Aerospace series - Lamps, incandescent - Part 065 : lamp, code 1820 - Product standard |
| 139 | AFNOR NF EN 2240-064-2011 | 2011-11-01 | French | Aerospace series - Lamps, incandescent - Part 064 : lamp, code 1819 - Product standard |
| 140 | AFNOR NF EN 1630-2011 | 2011-11-01 | French | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts |
| 141 | AFNOR NF EN 2240-063-2011 | 2011-11-01 | French | Aerospace series - Lamps, incandescent - Part 063 : lamp, code 1815 - Product standard |
| 142 | AFNOR NF EN 1501-1-2011 | 2011-11-01 | French | Refuse collection vehicles - General requirements and safety requirements - Part 1 : rear loaded refuse collection vehicles |
| 143 | AFNOR NF EN 12201-5-2011 | 2011-11-01 | French | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5 : fitness for purpose of the system |
| 144 | AFNOR NF EN 12201-3-2011 | 2011-11-01 | French | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3 : fittings |
| 145 | AFNOR NF EN 12201-2-2011 | 2011-11-01 | French | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2 : pipes |
| 146 | AFNOR NF EN 12201-1-2011 | 2011-11-01 | French | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1 : general |
| 147 | AFNOR NF EN 1627-2011 | 2011-11-01 | French | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Requirements and classification |
| 148 | AFNOR NF EN 1628-2011 | 2011-11-01 | French | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading |
| 149 | AFNOR NF EN 1629-2011 | 2011-11-01 | French | Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading |
| 150 | AFNOR NF EN 2240-062-2011 | 2011-11-01 | French | Aerospace series - Lamps, incandescent - Part 062 : lamp, code 1810 - Product standard |
| 151 | AFNOR NF EN 2240-070-2011 | 2011-11-01 | French | Aerospace series - Lamps, incandescent - Part 070 : lamp, code 2232 - Product standard |
| 152 | AFNOR NF EN ISO 16120-3-2011 | 2011-11-01 | French | Non-alloy steel wire rod for conversion to wire - Part 3 : specific requirements for rimmed and rimmed substitute, low carbon steel wire rod |
| 153 | AFNOR NF EN ISO 16120-4-2011 | 2011-11-01 | French | Non-alloy steel wire rod for conversion to wire - Part 4 : specific requirements for wire rod for special applications |
| 154 | AFNOR NF EN ISO 20877-2011 | 2011-11-01 | French | Footwear - Test methods for whole shoe - Thermal insulation |
| 155 | AFNOR NF ISO 3598-2011 | 2011-11-01 | French | Textile glass - Yarns - Basis for a specification |
| 156 | AFNOR NF EN 50550-2011 | 2011-11-01 | French | Power frequency overvoltage protective device for household and similar applications (POP) |
| 157 | AFNOR NF EN 16006-2011 | 2011-11-01 | French | Animal feeding stuffs - Determination of the Sum of Fumonisin B1 & B2 in compound animal feed with immunoaffinity clean-up and RP-HPLC with fluorescence detection after pre- or postcolumn derivatisation |
| 158 | AFNOR NF EN 15333-1-2011 | 2011-11-01 | French | Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1 : demand apparatus |
| 159 | AFNOR NF EN ISO 10863-2011 | 2011-11-01 | French | Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) |
| 160 | AFNOR NF ISO 15222-2011 | 2011-11-01 | French | Truck and bus tyres - Method for measuring relative wet grip performance - Loaded new tyres |
| 161 | AFNOR NF ISO 10640-2011 | 2011-11-01 | French | Plastics - Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy |
| 162 | AFNOR NF EN ISO 16120-1-2011 | 2011-11-01 | French | Non-alloy steel wire rod for conversion to wire - Part 1 : general requirements |
| 163 | AFNOR NF EN ISO 16120-2-2011 | 2011-11-01 | French | Non-alloy steel wire rod for conversion to wire - Part 2 : specific requirements for general purpose wire rod |
| 164 | AFNOR NF EN 60974-4-2011 | 2011-10-01 | French | Arc welding equipment - Part 4 : periodic inspection and testing |
| 165 | AFNOR NF EN 55016-2-2-2011 | 2011-10-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2 : methods of measurement of disturbances and immunity - Measurement of disturbance power |
| 166 | AFNOR NF EN 60034-18-32-2011 | 2011-10-01 | French | Rotating electrical machines - Part 18-32 : functional evaluation of insulation systems - Test procedures for form-wound windings - Evaluation by electrical endurance |
| 167 | AFNOR NF EN 60079-35-1-2011 | 2011-10-01 | French | Explosive atmospheres - Part 35-1 : caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion |
| 168 | AFNOR NF EN 60238/A2-2011 | 2011-10-01 | French | Edison screw lampholders |
| 169 | AFNOR NF EN 60252-2-2011 | 2011-10-01 | French | AC motor capacitors - Part 2 : motor start capacitors |
| 170 | AFNOR NF EN 60519-6-2011 | 2011-10-01 | French | Safety in electroheat installations - Part 6 : specifications for safety in industrial microwave heating equipment |
| 171 | AFNOR NF EN 14142-1-2011 | 2011-10-01 | French | Postal services - Address databases - Part 1 : components of postal addresses |
| 172 | AFNOR NF EN ISO 13130-2011 | 2011-10-01 | French | Laboratory glassware - Desiccators |
| 173 | AFNOR NF EN ISO 13079-2011 | 2011-10-01 | French | Laboratory glass and plastics ware - Tubes for the measurement of the erythrocyte sedimentation rate by the Westergren method |
| 174 | AFNOR NF EN 60679-6-2011 | 2011-10-01 | French | Quartz crystal controlled oscillators of assessed quality - Part 6 : phase jitter measurement method for quartz crystal oscillators and SAW oscillators - Application guidelines |
| 175 | AFNOR NF EN 13480-5/A1-2011 | 2011-10-01 | French | Metallic industrial piping - Part 5 : inspection and testing |
| 176 | AFNOR NF ISO 12090-1-2011 | 2011-10-01 | French | Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 1 : Boundary dimensions and tolerances for series 1, 2 and 3 |
| 177 | AFNOR NF ISO 12090-2-2011 | 2011-10-01 | French | Rolling bearings - Profiled rail guides for linear motion rolling bearings - Part 2 : Boundary dimensions and tolerances for series 4 and 5 |
| 178 | AFNOR NF EN 13480-8/A1-2011 | 2011-10-01 | French | Metallic industrial piping - Part 8 : additional requirements for aluminium and aluminium alloy piping |
| 179 | AFNOR NF ISO 12809-2011 | 2011-10-01 | French | Crop protection equipment - Reciprocating positive displacement pumps and centrifugal - Test methods |
| 180 | AFNOR NF EN ISO 12543-6-2011 | 2011-10-01 | French | Glass in building - Laminated glass and laminated safety glass - Part 6 : appearance |
| 181 | AFNOR NF EN ISO 12543-5-2011 | 2011-10-01 | French | Glass in building - Laminated glass and laminated safety glass - Part 5 : dimensions and edge finishing |
| 182 | AFNOR NF EN ISO 12543-4-2011 | 2011-10-01 | French | Glass in building - Laminated glass and laminated safety glass - Part 4 : test methods for durability |
| 183 | AFNOR NF EN ISO 12543-3-2011 | 2011-10-01 | French | Glass in building - Laminated glass and laminated safety glass - Part 3 : laminated glass |
| 184 | AFNOR NF EN ISO 12543-2-2011 | 2011-10-01 | French | Glass in building - Laminated glass and laminated safety glass - Part 2 : laminated safety glass |
| 185 | AFNOR NF EN ISO 12543-1-2011 | 2011-10-01 | French | Glass in building - Laminated glass and laminated safety glass - Part 1 : definitions and description of component parts |
| 186 | AFNOR NF EN ISO 10271-2011 | 2011-10-01 | French | Dentistry - Corrosion test methods for metallic materials |
| 187 | AFNOR NF EN ISO 9999-2011 | 2011-10-01 | French | Assistive products for persons with disability - Classification and terminology |
| 188 | AFNOR NF EN ISO 26800-2011 | 2011-10-01 | French | Ergonomics - General approach, principles and concepts |
| 189 | AFNOR NF EN ISO 9311-2-2011 | 2011-10-01 | French | Adhesives for thermoplastic piping systems - Part 2 : determination of shear strength |
| 190 | AFNOR NF EN ISO 9241-420-2011 | 2011-10-01 | French | Ergonomics of human-system interaction - Part 420 : selection of physical input devices |
| 191 | AFNOR NF EN ISO 8224-1/A1-2011 | 2011-10-01 | French | Traveller irrigation machines - Part 1 : operational characteristics and laboratory and field test methods - Amendment 1 |
| 192 | AFNOR NF EN ISO 7711-2-2011 | 2011-10-01 | French | Dentistry - Rotary diamond instruments - Part 2 : discs |
| 193 | AFNOR NF EN ISO 7053-2011 | 2011-10-01 | French | Hexagon washer head tapping screws |
| 194 | AFNOR NF EN ISO 7051-2011 | 2011-10-01 | French | Cross-recessed raised countersunk (oval) head tapping screws |
| 195 | AFNOR NF EN ISO 7050-2011 | 2011-10-01 | French | Cross recessed countersunk (flat) head tapping screws |
| 196 | AFNOR NF EN ISO 7049-2011 | 2011-10-01 | French | Cross-recessed pan head tapping screws |
| 197 | AFNOR NF EN 31-2011 | 2011-10-01 | French | Wash basins - Connecting dimensions |
| 198 | AFNOR NF EN ISO 6875-2011 | 2011-10-01 | French | Dentistry - Patient chair |
| 199 | AFNOR NF EN ISO 6272-2-2011 | 2011-10-01 | French | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small area indenter |
| 200 | AFNOR NF EN ISO 6272-1-2011 | 2011-10-01 | French | Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter |
| 201 | AFNOR NF EN ISO 7494-1-2011 | 2011-10-01 | French | Dentistry - Dental units - Part 1 : general requirements and test methods |
| 202 | AFNOR NF EN 33-2011 | 2011-10-01 | French | WC pans and WC suites - Connecting dimensions |
| 203 | AFNOR XP CEN/TS 81-76-2011 | 2011-10-01 | French | Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 76 : evacuation of disabled persons using lifts |
| 204 | AFNOR NF E67-001-2011 | 2011-10-01 | French | Additive manufacturing - Vocabulary |
| 205 | AFNOR NF EN 81-31-2011 | 2011-10-01 | French | Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31 : accessible goods only lifts |
| 206 | AFNOR NF EN ISO 24234/A1-2011 | 2011-10-01 | French | Dentistry - Mercury and alloys for dental amalgam - Amendment 1 : requirements for marking and manufacturers instructions concerning mercury |
| 207 | AFNOR NF ISO 24631-6-2011 | 2011-10-01 | French | Radiofrequency identification of animals - Part 6 : representation of animal identification information (visual display/data transfer) |
| 208 | AFNOR NF EN 55016-2-1/A1-2011 | 2011-10-01 | French | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1 : methods of measurement of disturbances and immunity - Conducted disturbance measurements |
| 209 | AFNOR NF EN 60838-1/A2-2011 | 2011-10-01 | French | Miscellaneous lampholders - Part 1 : general requirements and tests |
| 210 | AFNOR NF EN ISO 28706-5-2011 | 2011-10-01 | French | Vitreous and porcelain enamels -Determination of resistance to chemical corrosion - Part 5 : determination of resistance to chemical corrosion in closed systems |
| 211 | AFNOR NF EN 60793-2-40-2011 | 2011-10-01 | French | Optical fibres - Part 2-40 : product specifications - Sectional specification for category A4 multimode fibres |
| 212 | AFNOR NF EN ISO 14006-2011 | 2011-10-01 | French | Environmental management systems - Guidelines for incorporating ecodesign |
| 213 | AFNOR NF EN 1999-1-4/A1-2011 | 2011-10-01 | French | Eurocode 9 : design of aluminium structures - Part 1-4 : cold-formed structural sheeting |
| 214 | AFNOR NF EN 60793-2-10-2011 | 2011-10-01 | French | Optical fibres - Part 2-10 : product specifications - Sectional specification for category A1 multimode fibres |
| 215 | AFNOR NF P16-005-2011 | 2011-10-01 | French | Rainwater harvesting systems for inside and outside buildings use |
| 216 | AFNOR NF EN 60793-1-32-2011 | 2011-10-01 | French | Optical fibres - Part 1-32 : measurement methods and test procedures - Coating strippability |
| 217 | AFNOR NF EN 50128-2011 | 2011-10-01 | French | Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems |
| 218 | AFNOR NF EN 50548-2011 | 2011-10-01 | French | Junction boxes for photovoltaic modules |
| 219 | AFNOR FD DTU 34.3-2011 | 2011-10-01 | French | Building works - Choice of industrial commercial and garage doors depending on their exposure to wind - Guide for prime contractors |
| 220 | AFNOR FD ISO/TR 13121-2011 | 2011-10-01 | French | Nanotechnologies - Nanomaterial risk evaluation |
| 221 | AFNOR NF EN 4604-009-2011 | 2011-10-01 | French | Aerospace series - Cable, electrical, for signal transmission - Part 009 : cable, coaxial, light weight, 50 Ohms, 180 °C, type KW (light WN) - Product standard |
| 222 | AFNOR NF EN ISO 20963-2011 | 2011-10-01 | French | Soil quality - Effects of pollutants on insect larvae (Oxythyrea funesta) - Determination of acute toxicity |
| 223 | AFNOR AC P16-635-2011 | 2011-10-01 | French | Diagnosis repository for small wastewater treatment systems |
| 224 | AFNOR NF EN 15946-2011 | 2011-10-01 | French | Conservation of cultural property - Packing principles for transport |
| 225 | AFNOR NF ISO 776-2011 | 2011-10-01 | French | Pulps - Determination of acid-insoluble ash |
| 226 | AFNOR NF EN 16014-2011 | 2011-10-01 | French | Hardware for furniture - Strength and durability of locking mechanisms |
| 227 | AFNOR NF EN 302774-2011 | 2011-10-01 | French | Broadband Wireless Access Systems (BWA) in the 3400 MHz to 3800 MHz frequency band - Base Stations - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive (V1.1.1) |
| 228 | AFNOR NF EN ISO 17932-2011 | 2011-10-01 | French | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content |
| 229 | AFNOR NF EN 302998-1-2011 | 2011-10-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Transmitting equipment for terrestrial mobile TV to provide multimedia multicast service - Part 1 : Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive, C |
| 230 | AFNOR NF ISO 13053-2-2011 | 2011-10-01 | French | Quantitative methods in process improvement - Six Sigma - Part 2 : tools and techniques |
| 231 | AFNOR NF ISO 13053-1-2011 | 2011-10-01 | French | Quantitative methods in process improvement - Six Sigma - Part 1 : DMAIC methodology |
| 232 | AFNOR NF EN ISO 1207-2011 | 2011-10-01 | French | Slotted cheese head screws - Product grade A |
| 233 | AFNOR NF EN ISO 1479-2011 | 2011-10-01 | French | Hexagon head tapping screws |
| 234 | AFNOR NF EN ISO 1481-2011 | 2011-10-01 | French | Slotted pan head tapping screws |
| 235 | AFNOR NF EN ISO 1482-2011 | 2011-10-01 | French | Slotted countersunk (flat) head tapping screws |
| 236 | AFNOR NF EN ISO 1483-2011 | 2011-10-01 | French | Slotted raised countersunk (oval) head tapping screws |
| 237 | AFNOR NF EN ISO 16140/A1-2011 | 2011-10-01 | French | Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods - Amendment 1 |
| 238 | AFNOR NF EN ISO 1797-1-2011 | 2011-10-01 | French | Dentistry - Shanks for rotary instruments - Part 1 : shanks made of metals |
| 239 | AFNOR NF EN ISO 4628-6-2011 | 2011-10-01 | French | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6 : assessment of degree of chalking by tape method |
| 240 | AFNOR NF EN ISO 4766-2011 | 2011-10-01 | French | Slotted set screws with flat point |
| 241 | AFNOR NF EN ISO 6158-2011 | 2011-10-01 | French | Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes |
| 242 | AFNOR NF EN 62507-1-2011 | 2011-10-01 | French | Identification systems enabling unambiguous information interchange - Requirements - Part 1 : principles and methods |
| 243 | AFNOR NF EN 62327-2011 | 2011-10-01 | French | Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation |
| 244 | AFNOR NF U42-001-1-2011 | 2011-10-01 | French | Fertilizers - Designations and specifications - Part 1 : inorganic fertilizers |
| 245 | AFNOR NF EN 62244-2011 | 2011-10-01 | French | Radiation protection instrumentation - Installed radiation monitors for the detection of radioactive and special nuclear materials at national borders |
| 246 | AFNOR NF EN ISO 13132-2011 | 2011-10-01 | French | Laboratory glassware - Petri dishes |
| 247 | AFNOR NF EN 62129-2-2011 | 2011-10-01 | French | Calibration of wavelength/optical frequency measurement insturments - Part 2 : Michelson interferometer single wavelength meters |
| 248 | AFNOR UTE C18-550-2011 | 2011-10-01 | French | Recueil dinstructions de sécurité dordre électrique pour opérations sur véhicules/engins automobiles à motorisation thermique, électrique ou hybride ayant une énergie électrique embarquée |
| 249 | AFNOR NF EN 62047-8-2011 | 2011-10-01 | French | Semiconductor devices - Micro-electromechanical devices - Part 8 : strip bending test method for tensile property measurement of thin films |
| 250 | AFNOR NF EN 61951-2-2011 | 2011-10-01 | French | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Portable sealed rechargeable single cells - Part 2 : nickel-metal hydride |
| 251 | AFNOR NF EN 61937-10-2011 | 2011-10-01 | French | Digital audio - Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 - Part 10 : non-linear PCM bitstreams according to the MPEG-4 Audio Lossless Coding (ALS) format |
| 252 | AFNOR NF EN 61784-3-18-2011 | 2011-10-01 | French | Industrial communication networks - Profiles - Part 3-18 : functionnal safety fieldbuses - Additional specifications for CPF 18 |
| 253 | AFNOR NF EN 61753-121-3-2011 | 2011-10-01 | French | Fibre optic interconnecting devices and passive components - Performance standards - Part 121-3 : simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for Category U - Uncontrolled environment |
| 254 | AFNOR NF EN 61558-2-12-2011 | 2011-10-01 | French | Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12 : particular requirements and tests for constant voltage transformers and power supply units for constant voltage |
| 255 | AFNOR NF EN 61300-2-24-2011 | 2011-10-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-24 : tests - Screen testing of ceramic alignment split sleeve by stress application |
| 256 | AFNOR NF EN 61169-39-2011 | 2011-10-01 | French | Radio-frequency connectors - Part 39 : sectional specification for CQM series quick lock RF connectors |
| 257 | AFNOR NF EN 61029-2-3-2011 | 2011-10-01 | French | Safety of transportable motor-operated electric tools - Part 2-3 : particular requirements for planers and thicknessers |
| 258 | AFNOR NF EN 61000-4-21-2011 | 2011-10-01 | French | Electromagnetic compatibility (EMC) - Part 4-21 : testing and measurement techniques - Reverberation chamber test methods |
| 259 | AFNOR FD CEN/TR 16269-2011 | 2011-10-01 | French | Ambiant air - Guide for the measurement of anions and cations in PM2,5 |
| 260 | AFNOR NF EN 15982-2011 | 2011-10-01 | French | Metadata for Learning Opportunities (MLO) - Advertising |
| 261 | AFNOR NF EN 1090-2+A1-2011 | 2011-10-01 | French | Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures |
| 262 | AFNOR NF X50-220-2011 | 2011-10-01 | French | Service standard - School canteen catering service |
| 263 | AFNOR NF X35-109-2011 | 2011-10-01 | French | Ergonomics - Manual load handling for lifting, moving and pushing/pulling - Analysis methodolgy and threshold values |
| 264 | AFNOR NF EN 1090-2/IN1-2011 | 2011-10-01 | French | Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures |
| 265 | AFNOR NF EN 1127-1-2011 | 2011-10-01 | French | Explosives atmospheres - Explosion prevention and protection - Part 1 : basic concepts and methodology |
| 266 | AFNOR NF EN 1196-2011 | 2011-10-01 | French | Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters |
| 267 | AFNOR NF EN 4604-010-2011 | 2011-10-01 | French | Aerospace series - Cable, electrical, for signal transmission - Part 010 : cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD) - Product standard |
| 268 | AFNOR NF ISO 10315/A1-2011 | 2011-10-01 | French | Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method - Amendment 1 |
| 269 | AFNOR NF EN 12649+A1-2011 | 2011-10-01 | French | Concrete compactors and smoothing machines - Safety |
| 270 | AFNOR NF P98-086-2011 | 2011-10-01 | French | Road pavement structural design - Application to new pavement |
| 271 | AFNOR NF EN 12767-2011 | 2011-10-01 | French | Passive safety of support structures for road equipment - Requirements, classification and test methods |
| 272 | AFNOR CWA 15517-2011 | 2011-10-01 | French | European Handbook for Defence Procurement |
| 273 | AFNOR NF EN 13053+A1-2011 | 2011-10-01 | French | Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections |
| 274 | AFNOR NF ISO 6496-2011 | 2011-10-01 | French | Animal feeding stuffs - Determination of moisture and other volatile matter content |
| 275 | AFNOR NF EN 13053/IN1-2011 | 2011-10-01 | French | Ventilation for buildings - Air handling units - Ratings and performance for units, components and sections |
| 276 | AFNOR NF EN 15331-2011 | 2011-10-01 | French | Criteria for design, management and control of maintenance services for buildings |
| 277 | AFNOR NF EN 15590-2011 | 2011-10-01 | French | Solid recovered fuels - Determination of the current rate of aerobic microbial activity using the real dynamic respiration index |
| 278 | AFNOR NF EN 301178-1-2011 | 2011-10-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating the VHF bands (for non-GMDSS applications only) - Part 1 : technical characteristics and |
| 279 | AFNOR NF EN 302729-1-2011 | 2011-10-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Level Probing Radar (LPR) equipment operating in the frequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz,57 GHz to 64 GHz, 75 GHz to 85 GHz - Part 1 : Techni |
| 280 | AFNOR NF EN ISO 23753-2-2011 | 2011-10-01 | French | Soil quality - Determination of dehydrogenase activity in soils - Part 2 : method using iodotetrazolium chloride (INT) |
| 281 | AFNOR NF EN ISO 23753-1-2011 | 2011-10-01 | French | Soil Quality - Determination of dehydrogenase activity in soils - Part 1 : method using triphenyltetrazolium chloride (TTC) |
| 282 | AFNOR NF EN ISO 23611-4-2011 | 2011-10-01 | French | Soil quality - Sampling of soil invertebrates - Part 4 : sampling, extraction and identification of soil-inhabiting nematodes |
| 283 | AFNOR NF EN ISO 23611-3-2011 | 2011-10-01 | French | Soil quality - Sampling of soil invertebrates - Part 3 : sampling and soil extraction of enchytraeids |
| 284 | AFNOR NF EN ISO 23611-2-2011 | 2011-10-01 | French | Soil quality - Sampling of soil invertebrates - Part 2 : sampling and extraction of micro-arthropods (Collembola and Acarina) |
| 285 | AFNOR NF EN ISO 23611-1-2011 | 2011-10-01 | French | Soil quality - Sampling of soil invertebrates - Part 1 : hand-sorting and formalin extraction of earthworms |
| 286 | AFNOR NF EN ISO 23161-2011 | 2011-10-01 | French | Soil quality - Determination of selected organotin compounds - Gas-chromatographic method |
| 287 | AFNOR NF EN ISO 22119-2011 | 2011-10-01 | French | Microbiology of food and animal feeding stuffs - Real-time polymerase chain reaction (PCR) for the detection of food-borne pathogens - General requirements and definitions |
| 288 | AFNOR NF EN ISO 22118-2011 | 2011-10-01 | French | Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection and quantification of food-borne pathogens - Performance characteristics |
| 289 | AFNOR NF EN ISO 22030-2011 | 2011-10-01 | French | Soil quality - Biological methods - Chronic toxicity in higher plants |
| 290 | AFNOR NF EN ISO 15320-2011 | 2011-10-01 | French | Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract |
| 291 | AFNOR FD DTU 34.2-2011 | 2011-10-01 | French | Building works - Choice for shutters fitled to windows depending on their exposure to wind - guide for prime contractors |
| 292 | AFNOR NF EN ISO 16050-2011 | 2011-10-01 | French | Foodstuffs - Determination of aflatoxin B1, and the total content of aflatoxins B1, B2, G1 and G2 in cereals, nuts and derived products - High-performance liquid chromatographic method |
| 293 | AFNOR NF EN 12649/IN1-2011 | 2011-10-01 | French | Concrete compactors and smoothing machines - Safety |
| 294 | AFNOR NF EN ISO 15912/A1-2011 | 2011-10-01 | French | Dentistry - Casting investments and refractory die materials - Amendment 1 : requirement and test method for adequacy of expansion of Type 1 and Type 2 materials |
| 295 | AFNOR CWA 16367-2011 | 2011-10-01 | French | Implementing e-Competence Framework into SMEs |
| 296 | AFNOR NF EN 544-2011 | 2011-10-01 | French | Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods |
| 297 | AFNOR NF ISO 11357-6-2011 | 2011-10-01 | French | Plastics - Differential scanning calorimetry (DSC) - Part 6 : determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| 298 | AFNOR NF ISO 10362-1/A1-2011 | 2011-10-01 | French | Cigarettes - Determination of water in smoke condensates - Part 1 : gas-chromatographic method - Amendment 1 |
| 299 | AFNOR NF EN ISO 3405-2011 | 2011-10-01 | French | Petroleum products - Determination of distillation characteristics at atmospheric pressure |
| 300 | AFNOR BP X30-323-9-2011 | 2011-10-01 | French | General principles for an environmental communication on mass market products - Part 9 : methodology for the environmental impacts assesment of television |
| 301 | AFNOR BP X30-323-10-2011 | 2011-10-01 | French | General principles for an environmental communication on mass market products - Part 10 : methodology for the environmental impacts assesment of bedding |
| 302 | AFNOR FD P18-823-2011 | 2011-10-01 | French | Hydraulic binder or synthetic resin based sealing products - Recommendations for the design and dimensioning of anchoring of reinforcing steel bars in reinforced concrete |
| 303 | AFNOR NF S95-175-2011 | 2011-10-01 | French | Oxygen concentrator supply systems for use with medical gas pipeline systems - Modified by NF S95-175/A1:201403 (S95-175/A1) |
| 304 | AFNOR FD CEN/TR 16220-2011 | 2011-10-01 | French | Construction products - Assessment of release of dangerous substances - Complement to sampling |
| 305 | AFNOR NF ISO 5692-3-2011 | 2011-09-01 | French | Agricultural vehicles - Mechanical connections on towed vehicles - Part 3 : swivel hitch rings |
| 306 | AFNOR CWA 15748-47-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 47 : XFS MIB Device Specific Definitions Item Processing Module Device Class MIB Version 3.10 |
| 307 | AFNOR CWA 15748-46-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 46 : XFS MIB Device Specific Definitions Barcode Reader Device Class MIB 3.10 |
| 308 | AFNOR CWA 15748-45-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 45 : XFS MIB Device Specific Definitions Card Dispenser Device Class MIB 3.10 |
| 309 | AFNOR CWA 15748-44-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 44 : XFS MIB Application Management MIB 3.10 |
| 310 | AFNOR CWA 15748-43-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 43 : XFS MIB Device Specific Definitions Vendor Dependent Mode Class MIB 3.10 |
| 311 | AFNOR CWA 15748-41-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 41 : XFS MIB Device Specific Definitions Cash In Module Device Class MIB 3.10 |
| 312 | AFNOR CWA 15748-40-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 40 : XFS MIB Device Specific Definitions Card Embossing Unit Device Class MIB 3.10 |
| 313 | AFNOR CWA 15748-39-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 39 : XFS MIB Device Specific Definitions Alarm Device Class MIB 3.10 |
| 314 | AFNOR CWA 15748-38-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 38 : XFS MIB Device Specific Definitions Camera Device Class MIB 3.10 |
| 315 | AFNOR CWA 15748-37-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 37 : XFS MIB Device Specific Definitions Sensors and Indicators Unit Device Class MIB 3.10 |
| 316 | AFNOR CWA 15748-36-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 36 : XFS MIB Device Specific Definitions Text Terminal Unit Device Class MIB 3.10 |
| 317 | AFNOR CWA 15748-35-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 35 : XFS MIB Device Specific Definitions Depository Device Class MIB 3.10 |
| 318 | AFNOR CWA 15748-34-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 34 : XFS MIB Device Specific Definitions Check Reader/Scanner Device Class MIB 3.10 |
| 319 | AFNOR CWA 15748-33-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 33 : XFS MIB Device Specific Definitions PIN Keypad Device Class MIB 3.10 |
| 320 | AFNOR CWA 15748-32-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 32 : XFS MIB Device Specific Definitions Cash Dispenser Device Class MIB 3.10 |
| 321 | AFNOR CWA 15748-31-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 31 : XFS MIB Device Specific Definitions Identification Card Device Class MIB 3.10 |
| 322 | AFNOR CWA 15748-30-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 30 : XFS MIB Device Specific Definitions Printer Device Class MIB 3.10 |
| 323 | AFNOR CWA 15748-29-2011 | 2011-09-01 | French | Extensions for Financial Services (XFS) interface specification Release 3.10 - Part 29 : XFS MIB Architecture and SNMP Extensions MIB Version 3.10 |
| 324 | AFNOR XP T47-765-2011 | 2011-09-01 | French | End of Life Tyres (ELT) - Characterisation of granulates from granulation processes - Guidance for a testing campaign |
| 325 | AFNOR XP ISO/TS 13498-2011 | 2011-09-01 | French | Dentristry - Torsion test of implant body/connecting part joints of endosseous dental implant systems |
| 326 | AFNOR XP CEN/TS 16233-2-2011 | 2011-09-01 | French | Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 2 : identification of the enantiomer ratio of astaxanthin |
| 327 | AFNOR XP CEN/TS 16233-1-2011 | 2011-09-01 | French | Foodstuffs - HPLC method for the determination of xanthophylls in fish flesh - Part 1 : determination of astaxanthin and canthaxanthin |
| 328 | AFNOR NF ISO 11311-2011 | 2011-09-01 | French | Nuclear criticality safety - Critical values for homogeneous plutonium-uranium oxide fuel mixtures outside of reactors |
| 329 | AFNOR NF ISO 11037-2011 | 2011-09-01 | French | Sensory analysis - Guidance for sensory assessment of the colour of products |
| 330 | AFNOR NF ISO 10571-2011 | 2011-09-01 | French | Tyres for mobile cranes and similar specialized machines |
| 331 | AFNOR NF ISO 8082-1-2011 | 2011-09-01 | French | Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 1 : general machines |
| 332 | AFNOR NF ISO 7795-2011 | 2011-09-01 | French | Cross-country skis - Ski-binding screws - Test methods |
| 333 | AFNOR NF ISO 7626-1-2011 | 2011-09-01 | French | Mechanical vibration and shock - Experimental determination of mechanical mobility - Part 1 : basic terms and definitions, and transducer specifications |
| 334 | AFNOR NF ISO 7331-2011 | 2011-09-01 | French | Ski-poles for alpine skiing - Requirements and test methods |
| 335 | AFNOR NF ISO 7207-2-2011 | 2011-09-01 | French | Implants for surgery - Components for partial and total knee joint prostheses - Part 2 : articulating surfaces made of metal, ceramic and plastics materials |
| 336 | AFNOR NF ISO 6489-5-2011 | 2011-09-01 | French | Agricultural vehicles - Mechanical connections between towed and towing vehicles - Part 5 : specifications for non-swivel clevis couplings |
| 337 | AFNOR NF ISO 5830-2011 | 2011-09-01 | French | Resistance spot welding - Male electrode caps |
| 338 | AFNOR NF ISO 5829-2011 | 2011-09-01 | French | Resistance spot welding - Electrode adaptors, female taper 1:10 |
| 339 | AFNOR NF EN ISO 23470-2011 | 2011-09-01 | French | Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution |
| 340 | AFNOR NF EN ISO 22892-2011 | 2011-09-01 | French | Soil quality - Guidelines for the identification of target compounds by gas chromatography and mass spectrometry |
| 341 | AFNOR NF EN ISO 21254-3-2011 | 2011-09-01 | French | Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3 : assurance of laser power (energy) handling capabilities |
| 342 | AFNOR NF EN ISO 16072-2011 | 2011-09-01 | French | Soil quality - Laboratory methods for determination of microbial soil respiration |
| 343 | AFNOR NF EN ISO 15952-2011 | 2011-09-01 | French | Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination |
| 344 | AFNOR NF EN ISO 15753/A1-2011 | 2011-09-01 | French | Animal and vegetable fats and oils - Determination of polycyclic aromatic hydrocarbons - Amendment 1 : exclusion of olive pomace oil from the scope |
| 345 | AFNOR NF EN ISO 13408-2-2011 | 2011-09-01 | French | Aseptic processing of health care products - Part 2 : filtration |
| 346 | AFNOR NF EN ISO 11260-2011 | 2011-09-01 | French | Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution |
| 347 | AFNOR NF EN 301908-14-2011 | 2011-09-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 14 : Evolved Universal Terrestrial Radio Access (E-UTRA)Base Stations (BS) (5.2.1) |
| 348 | AFNOR NF EN 301908-13-2011 | 2011-09-01 | French | MT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 13 : Evolved Universal Terrestrial Radio Access (E-UTRA)User Equipment (UE) (V5.2.1) |
| 349 | AFNOR NF EN 301908-1-2011 | 2011-09-01 | French | IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 1: introduction and common requirements (V5.2.1) |
| 350 | AFNOR NF EN 301502-2011 | 2011-09-01 | French | Global System for Mobile communications (GSM) - Harmonized EN for Base Station Equipment covering the essential requirements of article 3.2 of the R&TTE Directive (V9.2.1) |
| 351 | AFNOR NF EN 62684-2011 | 2011-09-01 | French | Interoperability specifications of common external power supply (EPS) for use with data-enabled mobile telephones |
| 352 | AFNOR NF EN 62576-2011 | 2011-09-01 | French | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
| 353 | AFNOR NF EN 62464-2-2011 | 2011-09-01 | French | Magnetic resonance equipment for medical imaging - Part 2 : classification criteria for pulse sequences |
| 354 | AFNOR NF EN 62363-2011 | 2011-09-01 | French | Radiation protection instrumentation - Portable photon contamination meters and monitors |
| 355 | AFNOR NF EN 62343-2-2011 | 2011-09-01 | French | Dynamic modules - Part 2 : reliability qualification |
| 356 | AFNOR NF EN 62258-1-2011 | 2011-09-01 | French | Semiconductor die products - Part 1 : procurement and use |
| 357 | AFNOR NF EN 62116-2011 | 2011-09-01 | French | Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters |
| 358 | AFNOR NF EN 62047-4-2011 | 2011-09-01 | French | Semiconductor devices - Micro-electromechanical devices - Part 4 : generic specifications for MEMS |
| 359 | AFNOR NF EN 61881-1-2011 | 2011-09-01 | French | Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 1 : paper/plastic film capacitors |
| 360 | AFNOR NF EN 61803/A1-2011 | 2011-09-01 | French | Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters |
| 361 | AFNOR NF EN 61753-141-2-2011 | 2011-09-01 | French | Fibre optic interconnecting devices and passive components - Performance standard - Part 141-2 : fibre optic passive chromatic dispersion compensator using single-mode dispersion compensating fibre for category C - Controlled environments |
| 362 | AFNOR NF EN 61391-2-2011 | 2011-09-01 | French | Ultrasonics - Pulse-echo scanners - Part 2 : measurement of maximum depth of penetration and local dynamic range |
| 363 | AFNOR NF EN 60255-22-5-2011 | 2011-09-01 | French | Measuring relays and protection equipment - Part 22-5 : electrical disturbance tests - Surge immunity test |
| 364 | AFNOR NF EN 60127-1/A1-2011 | 2011-09-01 | French | Miniature fuses - Part 1 : definitions for miniature fuses and general requirements for miniature fuse-links |
| 365 | AFNOR NF EN 60099-8-2011 | 2011-09-01 | French | Surge arresters - Part 8 : metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| 366 | AFNOR NF EN 60086-5-2011 | 2011-09-01 | French | Primary batteries - Part 5 : safety of batteries with aqueous electrolyte |
| 367 | AFNOR NF EN 60086-2-2011 | 2011-09-01 | French | Primary batteries - Part 2 : physical and electrical specifications |
| 368 | AFNOR NF EN 60086-1-2011 | 2011-09-01 | French | Primary batteries - Part 1 : general |
| 369 | AFNOR NF EN 60076-2-2011 | 2011-09-01 | French | Power transformers - Part 2 : temperature rise for liquid-immersed transformers |
| 370 | AFNOR NF EN 60065/A12-2011 | 2011-09-01 | French | Audio, video and similar electronic apparatus - Safety requirements |
| 371 | AFNOR NF EN 15387-2011 | 2011-09-01 | French | Packaging - Flexible laminate tubes - Test methods to assess the strength of the side seam |
| 372 | AFNOR NF EN 13445-5 V2/A3-2011 | 2011-09-01 | French | Unfired pressure vessels - Part 5 : inspection and testing |
| 373 | AFNOR NF EN 13445-5 V2/A2-2011 | 2011-09-01 | French | Unfired pressure vessels - Part 5 : inspection and testing |
| 374 | AFNOR NF EN 13445-5 V2/A1-2011 | 2011-09-01 | French | Unfired pressure vessels - Part 5 : inspection and testing |
| 375 | AFNOR NF EN 12952-6-2011 | 2011-09-01 | French | Water-tube boilers and auxiliary installations - Part 6 : inspection during construction, documentation and marking of pressure parts of the boiler |
| 376 | AFNOR NF EN 12952-4-2011 | 2011-09-01 | French | Water-tube boilers and auxiliary installations - Part 4 : in-service boiler life expectancy calculations |
| 377 | AFNOR NF EN 12952-2-2011 | 2011-09-01 | French | Water-tube boilers and auxiliary installations - Part 2 : materials for pressure parts of boilers and accessories |
| 378 | AFNOR NF EN 12666-1/IN1-2011 | 2011-09-01 | French | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system |
| 379 | AFNOR NF EN 12666-1+A1-2011 | 2011-09-01 | French | Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1 : specifications for pipes, fittings and the system |
| 380 | AFNOR NF EN 12665-2011 | 2011-09-01 | French | Light and lighting - Basic terms and criteria for specifying lighting requirements |
| 381 | AFNOR NF EN 12561-8-2011 | 2011-09-01 | French | Railway applications - Tank wagons - Part 8 : heating connections |
| 382 | AFNOR NF EN 12561-7-2011 | 2011-09-01 | French | Railway applications - Tank wagons - Part 7 : platforms and ladders |
| 383 | AFNOR NF EN 12561-6-2011 | 2011-09-01 | French | Railway applications - Tank wagons - Part 6 : manholes |
| 384 | AFNOR NF EN 12561-5-2011 | 2011-09-01 | French | Railway applications - Tank wagons - Part 5 : devices for vapour return while filling or emptying of liquid products |
| 385 | AFNOR NF EN 12561-4-2011 | 2011-09-01 | French | Railway applications - Tank wagons - Part 4 : top devices for top emptying and filling of liquid products |
| 386 | AFNOR NF EN 12561-3-2011 | 2011-09-01 | French | Railway applications - Tank wagons - Part 3 : bottom filling and emptying devices for gases liquefied under pressure |
| 387 | AFNOR NF EN 12561-2-2011 | 2011-09-01 | French | Railway applications - Tank wagons - Part 2 : bottom emptying devices for liquid products including vapour return |
| 388 | AFNOR NF EN ISO 13408-3-2011 | 2011-09-01 | French | Aseptic processing of health care products - Part 3 : lyophilization |
| 389 | AFNOR NF EN 912-2011 | 2011-09-01 | French | Timber fasteners - Specifications for connectors for timbers |
| 390 | AFNOR NF EN 675-2011 | 2011-09-01 | French | Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method |
| 391 | AFNOR NF EN 674-2011 | 2011-09-01 | French | Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method |
| 392 | AFNOR NF DTU 40.37 P2-2011 | 2011-09-01 | French | Building works - Roof covering made of fiber-cement corrugated sheets - Part 2 : contract bill of special administrative model clauses |
| 393 | AFNOR NF EN 14961-4-2011 | 2011-09-01 | French | Solid biofuels - Fuel specifications and classes - Part 4 : wood chips for non-industrial use |
| 394 | AFNOR NF E35-421-2011 | 2011-09-01 | French | Refrigerating systems and heat pumps - Test method of equipments for recovery, recycling and reclaim of refrigerants used in refrigerating systems and heat pumps |
| 395 | AFNOR NF EN ISO 25177-2011 | 2011-09-01 | French | Soil quality - Field soil description |
| 396 | AFNOR NF EN ISO 13408-4-2011 | 2011-09-01 | French | Aseptic processing of health care products - Part 4 : clean-in-place technologies |
| 397 | AFNOR NF EN ISO 13408-1-2011 | 2011-09-01 | French | Aseptic processing of health care products - Part 1 : general requirements |
| 398 | AFNOR NF EN ISO 13385-2-2011 | 2011-09-01 | French | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2 : calliper depth gauge - Design and metrological characteristics |
| 399 | AFNOR NF EN 60534-8-3-2011 | 2011-09-01 | French | Industrial-process control valves - Part 8-3 : noise considerations - Control valve aerodynamic noise prediction method |
| 400 | AFNOR NF EN ISO 13385-1-2011 | 2011-09-01 | French | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1 : calliper - Design and metrological characteristics |
| 401 | AFNOR NF EN 2240-069-2011 | 2011-09-01 | French | Aerospace series - Lamps, incandescent - Part 069 : lamp, code 1978 - Product standard |
| 402 | AFNOR NF EN 2481-2011 | 2011-09-01 | French | Aerospace series - Steel FE-PL2108 (35NiCrMo16) - 1 250 MPa < or = Rm < or = 1 400 MPa - Forgings - De < or = 75 mm |
| 403 | AFNOR NF EN 2491-2011 | 2011-09-01 | French | Aerospace series - Molybdenum disulphide dry lubricants - Coating methods |
| 404 | AFNOR NF EN 13869/IN1-2011 | 2011-09-01 | French | Lighters - Child-resistance for lighters - Safety requirements and test methods |
| 405 | AFNOR NF EN 13869+A1-2011 | 2011-09-01 | French | Lighters - Child-resistance for lighters - Safety requirements and test methods |
| 406 | AFNOR NF EN 50216-12-2011 | 2011-09-01 | French | Power transformer and reactor fittings - Part 12 : fans |
| 407 | AFNOR NF EN ISO 13408-5-2011 | 2011-09-01 | French | Aseptic processing of health care products - Part 5 : sterilization in place |
| 408 | AFNOR NF EN 287-1-2011 | 2011-09-01 | French | Qualification test of welders - Fusion welding - Part 1 : steels |
| 409 | AFNOR NF ISO 27468-2011 | 2011-09-01 | French | Nuclear criticality safety - Evaluation of systems containing PWR UOX fuels - Bounding burnup credit approach |
| 410 | AFNOR NF E11-057-2011 | 2011-09-01 | French | Geometrical product specification (GPS) - Length measuring instruments - Reception and verification of mechanical dial gauges with radial retractable stem |
| 411 | AFNOR NF EN ISO 25424-2011 | 2011-09-01 | French | Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices |
| 412 | AFNOR NF EN 60352-8-2011 | 2011-09-01 | French | Solderless connections - Part 8 : compression mount connections - General requirements, test methods and practical guidance |
| 413 | AFNOR NF ISO 13738-2011 | 2011-09-01 | French | Lubricants, industrial oils and related products (class L) - Family E (Internal combustion engine oils) - Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD) |
| 414 | AFNOR NF DTU 40.37 P1-2-2011 | 2011-09-01 | French | Building works - Roof covering made of fiber-cement corrugated sheets - Part 1-2 : general criteria for selection of materials |
| 415 | AFNOR NF EN ISO 12625-1-2011 | 2011-09-01 | French | Tissue paper and tissue products - Part 1 : general guidance on terms |
| 416 | AFNOR NF EN 60349-2-2011 | 2011-09-01 | French | Electric traction - Rotating electrical machines for rail and road vehicles - Part 2 : electronic converter-fed alternating current motors |
| 417 | AFNOR NF EN 60349-1-2011 | 2011-09-01 | French | Electric traction - Rotating electrical machines for rail and road vehicles - Part 1 : machines other than electronic converter-fed alternating current motors |
| 418 | AFNOR NF EN 50174-1/A1-2011 | 2011-09-01 | French | Information technology - Cabling installation - Part 1 : installation specification and quality assurance |
| 419 | AFNOR NF DTU 40.37 P1-1-2011 | 2011-09-01 | French | Building works - Roof covering made of fiber-cement corrugated sheets - Part 1-1 : contract bill of technical model clauses |
| 420 | AFNOR NF DTU 40.37-2011 | 2011-09-01 | French | Building works - Roof covering made of fiber-cement corrugated sheets - Part 1-1 : contract bill of technical model clauses - Part 1-2 : general criteria for selection of materials - Part 2 : contract bill of special administrative model clauses |
| 421 | AFNOR NF ISO 11783-5-2011 | 2011-09-01 | French | Tractors and machinery for agriculture and forestry - Serial control and communications data network - Part 5 : network management |
| 422 | AFNOR NF C17-102-2011 | 2011-09-01 | French | Protection against lightning - Early streamer emission lightning protection systems |
| 423 | AFNOR NF EN 50556-2011 | 2011-09-01 | French | Road traffic signal systems |
| 424 | AFNOR NF EN ISO 9936/A1-2011 | 2011-09-01 | French | Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography - Amendment 1 : updating of reagents and confirmation of statistical data validity |
| 425 | AFNOR NF P98-260-1-2011 | 2011-09-01 | French | Tests relating to pavements - Measurements of the rheological properties of bituminous mixtures - Part 1 : determination of the lost of linearity under direct traction (tensile test) |
| 426 | AFNOR NF EN ISO 9241-910-2011 | 2011-09-01 | French | Ergonomics of human-system interaction - Part 910 : framework for tactile and haptic interaction |
| 427 | AFNOR NF EN 50518-3-2011 | 2011-09-01 | French | Monitoring and alarm receiving centre - Part 3 : procedures and requirements for operation |
| 428 | AFNOR NF ISO 16000-18-2011 | 2011-09-01 | French | Indoor air - Part 18 : detection and enumeration of moulds - Sampling by impaction |
| 429 | AFNOR NF A84-420-2011 | 2011-09-01 | French | Equipment for gas welding and allied processes - Pressure regulators inlet connections - Dimensions |
| 430 | AFNOR NF ISO 11837-2011 | 2011-09-01 | French | Machinery for forestry - Saw chain shot guarding systems - Test method and performance criteria |
| 431 | AFNOR NF EN 2240-061-2011 | 2011-09-01 | French | Aerospace series - Lamps, incandescent - Part 061 : lamp, code 1683 - Product standard |
| 432 | AFNOR NF EN ISO 7599-2011 | 2011-09-01 | French | Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium |
| 433 | AFNOR NF EN ISO 7380-2-2011 | 2011-09-01 | French | Button head screws - Part 2 : hexagon socket button head screws with collar |
| 434 | AFNOR NF EN ISO 7380-1-2011 | 2011-09-01 | French | Button head screws - Part 1 : hexagon socket button head screws |
| 435 | AFNOR NF EN ISO 14240-2-2011 | 2011-09-01 | French | Soil quality - Determination of soil microbial biomass - Part 2 : fumigation-extraction method |
| 436 | AFNOR NF P18-545-2011 | 2011-09-01 | French | Aggregates - defining elements, conformity and coding |
| 437 | AFNOR NF EN ISO 14240-1-2011 | 2011-09-01 | French | Soil quality - Determination of soil microbial biomass - Part 1 : substrate-induced respiration method |
| 438 | AFNOR NF EN 2240-066-2011 | 2011-09-01 | French | Aerospace series - Lamps, incandescent - Part 066 : lamp, code 1829 - Product standard |
| 439 | AFNOR NF EN 2240-067-2011 | 2011-09-01 | French | Aerospace series - Lamps, incandescent - Part 067 : lamp, code 1843 - Product standard |
| 440 | AFNOR NF EN ISO 13408-6-2011 | 2011-09-01 | French | Aseptic processing of health care products - Part 6 : isolator systems |
| 441 | AFNOR NF EN ISO 6185-4-2011 | 2011-09-01 | French | Inflatable boats - Part 4 : boats with an hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| 442 | AFNOR NF EN 2240-068-2011 | 2011-09-01 | French | Aerospace series - Lamps, incandescent - Part 068 : lamp, code 1864 - Product standard |
| 443 | AFNOR NF EN 50325-5-2011 | 2011-09-01 | French | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 5 : functional safety communication based on EN 50325-4 |
| 444 | AFNOR NF ISO 16000-25-2011 | 2011-09-01 | French | Indoor air - Part 25 : determination of the emission of semi-volatile organic compounds for building products - Micro-chamber method |
| 445 | AFNOR NF ISO 17066-2011 | 2011-09-01 | French | Hydraulic tools - Vocabulary |
| 446 | AFNOR NF EN 71-2-2011 | 2011-09-01 | French | Safety of toys - Part 2 : flammability |
| 447 | AFNOR FD S90-155-2011 | 2011-09-01 | French | Pipeline for compressed medical gases and vacuum - Additional elements for design and delivery acceptance |
| 448 | AFNOR CWA 16356-3-2011 | 2011-09-01 | French | Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 3 : european CORE INVOICE syntax mapping |
| 449 | AFNOR CWA 16356-2-2011 | 2011-09-01 | French | Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 2 : european CORE INVOICE data model |
| 450 | AFNOR CWA 16356-1-2011 | 2011-09-01 | French | Guide for a European CORE INVOICE data model with UN/CEFACT CII Implementation Guideline - Part 1 : introduction |
| 451 | AFNOR CWA 16336-2011 | 2011-09-01 | French | Superfine woven wool fabric labelling - Requirements for Super S code definition |
| 452 | AFNOR CWA 16335-2011 | 2011-09-01 | French | Biosafety professional competence |
| 453 | AFNOR CWA 15793-2011 | 2011-09-01 | French | Laboratory biorisk management |
| 454 | AFNOR BP X30-323-6-2011 | 2011-09-01 | French | General principles for an environmental communication on mass market products - Part 6 : methodology for the environmental impacts assesment of upholstered seats |
| 455 | AFNOR BP X30-323-4-2011 | 2011-09-01 | French | General principles for an environmental communication on mass market products - Part 4 : methodology for the environmental impacts assesment of wood furnitures |
| 456 | AFNOR NF X30-423-2011 | 2011-09-01 | French | Waste - Détermination of the permeability coefficient of piece of land by variable load test in an open cased well |
| 457 | AFNOR NF V47-001-2011 | 2011-09-01 | French | Rabbit meats - Domestic rabbit meat production and processing |
| 458 | AFNOR NF U44-204-2011 | 2011-09-01 | French | Fertilizers or liming material or liming material-fertilizer with agronomic additive - Types and specifications |
| 459 | AFNOR NF T75-234-2011 | 2011-09-01 | French | Essential oils - Oil of palmarosa (Cymbopogon martinii (Roxburgh) W. Watson var. motia) |
| 460 | AFNOR NF T30-609-2-2011 | 2011-09-01 | French | Paints and varnishes - Operator certification standard - Part 2 : level 3 : works foremen for the implementation of anticorrosion coatings for metallic structures |
| 461 | AFNOR NF T30-609-1-2011 | 2011-09-01 | French | Paints and varnishes - Operator certification standard - Part 1 : levels 1 and 2 : operators for the implementation of anticorrosion coatings for metallic structures |
| 462 | AFNOR NF S96-900-2011 | 2011-09-01 | French | Quality of biological resource centres (BRCs) - Management system of a BRC and quality of biological resources |
| 463 | AFNOR NF S61-933-2011 | 2011-09-01 | French | Fire safety systems (F.S.S.) - Running and maintenance rules |
| 464 | AFNOR NF ISO 2859-1/A1-2011 | 2011-09-01 | French | Sampling procedures for inspection by attributes - Part 1 : sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| 465 | AFNOR NF ISO 15-2011 | 2011-09-01 | French | Rolling bearings - Radial bearings - Boundary dimensions, general plan |
| 466 | AFNOR NF EN ISO/CEI 80079-34-2011 | 2011-09-01 | French | Explosive atmospheres - Part 34 : application of quality systems for equipment manufacture |
| 467 | AFNOR NF EN ISO/CEI 17050-1-2011 | 2011-09-01 | French | Conformity assessment - Suppliers declaration of conformity - Part 1 : general requirements |
| 468 | AFNOR NF EN ISO 21254-2-2011 | 2011-09-01 | French | Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 2 : treshold determination |
| 469 | AFNOR NF EN ISO 21254-1-2011 | 2011-09-01 | French | Lasers and laser-related equipment - Test methods of laser-induced damage threshold - Part 1 : definitions and general principles |
| 470 | AFNOR NF EN ISO 19258-2011 | 2011-09-01 | French | Soil quality - Guidance on the determination of background values |
| 471 | AFNOR NF EN ISO 16133-2011 | 2011-09-01 | French | Soil quality - Guidance on the establishment and maintenance of monitoring programmes |
| 472 | AFNOR NF EN ISO 14254-2011 | 2011-09-01 | French | Soil quality - Determination of exchangeable acidity in barium chloride extracts |
| 473 | AFNOR NF EN ISO 2867-2011 | 2011-09-01 | French | Earth-moving machinery - Access systems |
| 474 | AFNOR NF EN ISO 1833-24-2011 | 2011-09-01 | French | Textiles - Quantitative chemical analysis - Part 24 : mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) |
| 475 | AFNOR NF EN ISO 772-2011 | 2011-09-01 | French | Hydrometry - Vocabulary and symbols |
| 476 | AFNOR NF EN ISO 139/A1-2011 | 2011-09-01 | French | Textiles - Standard atmospheres for conditioning and testing - Amendment 1 |
| 477 | AFNOR NF EN 302998-2-2011 | 2011-09-01 | French | Electromagnetic compatibility and Radio spectrum Matters (ERM) - Transmitting equipment for terrestrial mobile TV to provide multimedia multicast service - Part 2 : harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive,T |
| 478 | AFNOR NF EN 302729-2-2011 | 2011-09-01 | French | Electromagnetic compatibilityand Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Level Probing Radar (LPR) equipment operating in thefrequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5 GHz,57 GHz to 64 GHz, 75 GHz to 85 GHz - Part 2 : Harmoniz |
| 479 | AFNOR NF EN 61300-3-45-2011 | 2011-09-01 | French | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45 : examinations and measurements - Attenuation of random mated multi-fibre connectors |
| 480 | AFNOR NF EN 61169-40-2011 | 2011-09-01 | French | Radio-frequency connectors - Part 40 : sectional specification for 2.4 series RF connectors |
| 481 | AFNOR NF EN 61029-2-12-2011 | 2011-09-01 | French | Safety of transportable motor-operated electric tools - Part 2-12 : particular requirements for threading machines |
| 482 | AFNOR NF EN 61000-4-22-2011 | 2011-09-01 | French | Electromagnetic compatibility (EMC) - Part 4-22 : testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) |
| 483 | AFNOR NF EN 60947-1/A1-2011 | 2011-09-01 | French | Low-voltage switchgear and controlgear - Part 1 : general rules |
| 484 | AFNOR NF EN 60904-5-2011 | 2011-09-01 | French | Photovoltaic devices - Part 5 : determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method |
| 485 | AFNOR NF EN 60770-2-2011 | 2011-09-01 | French | Transmitters for use in industrial-process control systems - Part 2 : methods for inspection and routine testing |
| 486 | AFNOR NF EN 60770-1-2011 | 2011-09-01 | French | Transmitters for use in industrial-process control systems - Part 1 : methods for performance evaluation |
| 487 | AFNOR NF EN 50130-5-2011 | 2011-09-01 | French | Alarm systems - Part 5 : environmental test methods |
| 488 | AFNOR NF EN 50065-1/A1-2011 | 2011-09-01 | French | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1 : general requirements, frequency bands and electromagnetic disturbances |
| 489 | AFNOR NF EN 16081-2011 | 2011-09-01 | French | Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing |
| 490 | AFNOR NF EN 16009-2011 | 2011-09-01 | French | Flameless explosion venting devices |
| 491 | AFNOR NF EN 15967-2011 | 2011-09-01 | French | Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours |
| 492 | AFNOR NF EN 12561-1-2011 | 2011-09-01 | French | Railway applications - Tank wagons -Part 1 : identification plates for tank wagons for the carriage of dangerous goods |
| 493 | AFNOR NF EN 12326-2-2011 | 2011-09-01 | French | Slate and stone for discontinuous roofing and external cladding - Part 2 : methods of test for slate and carbonate slate |
| 494 | AFNOR NF EN 4165-026-2011 | 2011-09-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175°C continuous - Part 026 : accessories for single modules - Product standard |
| 495 | AFNOR NF EN 4165-024-2011 | 2011-09-01 | French | Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175°C continuous - Part 024 : single module plug - Product standard |
| 496 | AFNOR NF EN 4008-008-2011 | 2011-09-01 | French | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 008 : positioner for crimping tool M22520/7-01 - Product standard |
| 497 | AFNOR NF EN 4008-007-2011 | 2011-09-01 | French | Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 007 : positioner for crimping tool M22520/2-01 - Product standard |
| 498 | AFNOR NF EN 1264-1-2011 | 2011-09-01 | French | Water based surface embedded heating and cooling systems - Part 1 : definitions and symbols |
| 499 | AFNOR NF EN 1089-3-2011 | 2011-09-01 | French | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3 : colour coding |
| 500 | AFNOR FD CEN/TR 16243-2011 | 2011-09-01 | French | Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters |
|